Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1 | /* |
| 2 | * MUSB OTG driver virtual root hub support |
| 3 | * |
| 4 | * Copyright 2005 Mentor Graphics Corporation |
| 5 | * Copyright (C) 2005-2006 by Texas Instruments |
| 6 | * Copyright (C) 2006-2007 Nokia Corporation |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 20 | * 02110-1301 USA |
| 21 | * |
| 22 | * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| 23 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 24 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 25 | * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 26 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 27 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 28 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 29 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 30 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 31 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 32 | * |
| 33 | */ |
| 34 | |
| 35 | #include <linux/module.h> |
| 36 | #include <linux/kernel.h> |
| 37 | #include <linux/sched.h> |
| 38 | #include <linux/slab.h> |
| 39 | #include <linux/errno.h> |
| 40 | #include <linux/init.h> |
| 41 | #include <linux/time.h> |
| 42 | #include <linux/timer.h> |
| 43 | |
| 44 | #include <asm/unaligned.h> |
| 45 | |
| 46 | #include "musb_core.h" |
| 47 | |
| 48 | |
| 49 | static void musb_port_suspend(struct musb *musb, bool do_suspend) |
| 50 | { |
| 51 | u8 power; |
| 52 | void __iomem *mbase = musb->mregs; |
| 53 | |
| 54 | if (!is_host_active(musb)) |
| 55 | return; |
| 56 | |
| 57 | /* NOTE: this doesn't necessarily put PHY into low power mode, |
| 58 | * turning off its clock; that's a function of PHY integration and |
| 59 | * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect |
| 60 | * SE0 changing to connect (J) or wakeup (K) states. |
| 61 | */ |
| 62 | power = musb_readb(mbase, MUSB_POWER); |
| 63 | if (do_suspend) { |
| 64 | int retries = 10000; |
| 65 | |
| 66 | power &= ~MUSB_POWER_RESUME; |
| 67 | power |= MUSB_POWER_SUSPENDM; |
| 68 | musb_writeb(mbase, MUSB_POWER, power); |
| 69 | |
| 70 | /* Needed for OPT A tests */ |
| 71 | power = musb_readb(mbase, MUSB_POWER); |
| 72 | while (power & MUSB_POWER_SUSPENDM) { |
| 73 | power = musb_readb(mbase, MUSB_POWER); |
| 74 | if (retries-- < 1) |
| 75 | break; |
| 76 | } |
| 77 | |
| 78 | DBG(3, "Root port suspended, power %02x\n", power); |
| 79 | |
| 80 | musb->port1_status |= USB_PORT_STAT_SUSPEND; |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 81 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 82 | case OTG_STATE_A_HOST: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 83 | musb->xceiv->state = OTG_STATE_A_SUSPEND; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 84 | musb->is_active = is_otg_enabled(musb) |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 85 | && musb->xceiv->host->b_hnp_enable; |
David Brownell | ab983f2a | 2009-03-31 12:35:09 -0700 | [diff] [blame] | 86 | if (musb->is_active) |
| 87 | mod_timer(&musb->otg_timer, jiffies |
| 88 | + msecs_to_jiffies( |
| 89 | OTG_TIME_A_AIDL_BDIS)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 90 | musb_platform_try_idle(musb, 0); |
| 91 | break; |
| 92 | #ifdef CONFIG_USB_MUSB_OTG |
| 93 | case OTG_STATE_B_HOST: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 94 | musb->xceiv->state = OTG_STATE_B_WAIT_ACON; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 95 | musb->is_active = is_otg_enabled(musb) |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 96 | && musb->xceiv->host->b_hnp_enable; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 97 | musb_platform_try_idle(musb, 0); |
| 98 | break; |
| 99 | #endif |
| 100 | default: |
| 101 | DBG(1, "bogus rh suspend? %s\n", |
| 102 | otg_state_string(musb)); |
| 103 | } |
| 104 | } else if (power & MUSB_POWER_SUSPENDM) { |
| 105 | power &= ~MUSB_POWER_SUSPENDM; |
| 106 | power |= MUSB_POWER_RESUME; |
| 107 | musb_writeb(mbase, MUSB_POWER, power); |
| 108 | |
| 109 | DBG(3, "Root port resuming, power %02x\n", power); |
| 110 | |
| 111 | /* later, GetPortStatus will stop RESUME signaling */ |
| 112 | musb->port1_status |= MUSB_PORT_STAT_RESUME; |
| 113 | musb->rh_timer = jiffies + msecs_to_jiffies(20); |
| 114 | } |
| 115 | } |
| 116 | |
| 117 | static void musb_port_reset(struct musb *musb, bool do_reset) |
| 118 | { |
| 119 | u8 power; |
| 120 | void __iomem *mbase = musb->mregs; |
| 121 | |
| 122 | #ifdef CONFIG_USB_MUSB_OTG |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 123 | if (musb->xceiv->state == OTG_STATE_B_IDLE) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 124 | DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n"); |
| 125 | musb->port1_status &= ~USB_PORT_STAT_RESET; |
| 126 | return; |
| 127 | } |
| 128 | #endif |
| 129 | |
| 130 | if (!is_host_active(musb)) |
| 131 | return; |
| 132 | |
| 133 | /* NOTE: caller guarantees it will turn off the reset when |
| 134 | * the appropriate amount of time has passed |
| 135 | */ |
| 136 | power = musb_readb(mbase, MUSB_POWER); |
| 137 | if (do_reset) { |
| 138 | |
| 139 | /* |
| 140 | * If RESUME is set, we must make sure it stays minimum 20 ms. |
| 141 | * Then we must clear RESUME and wait a bit to let musb start |
| 142 | * generating SOFs. If we don't do this, OPT HS A 6.8 tests |
| 143 | * fail with "Error! Did not receive an SOF before suspend |
| 144 | * detected". |
| 145 | */ |
| 146 | if (power & MUSB_POWER_RESUME) { |
| 147 | while (time_before(jiffies, musb->rh_timer)) |
| 148 | msleep(1); |
| 149 | musb_writeb(mbase, MUSB_POWER, |
| 150 | power & ~MUSB_POWER_RESUME); |
| 151 | msleep(1); |
| 152 | } |
| 153 | |
| 154 | musb->ignore_disconnect = true; |
| 155 | power &= 0xf0; |
| 156 | musb_writeb(mbase, MUSB_POWER, |
| 157 | power | MUSB_POWER_RESET); |
| 158 | |
| 159 | musb->port1_status |= USB_PORT_STAT_RESET; |
| 160 | musb->port1_status &= ~USB_PORT_STAT_ENABLE; |
| 161 | musb->rh_timer = jiffies + msecs_to_jiffies(50); |
| 162 | } else { |
| 163 | DBG(4, "root port reset stopped\n"); |
| 164 | musb_writeb(mbase, MUSB_POWER, |
| 165 | power & ~MUSB_POWER_RESET); |
| 166 | |
| 167 | musb->ignore_disconnect = false; |
| 168 | |
| 169 | power = musb_readb(mbase, MUSB_POWER); |
| 170 | if (power & MUSB_POWER_HSMODE) { |
| 171 | DBG(4, "high-speed device connected\n"); |
| 172 | musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; |
| 173 | } |
| 174 | |
| 175 | musb->port1_status &= ~USB_PORT_STAT_RESET; |
| 176 | musb->port1_status |= USB_PORT_STAT_ENABLE |
| 177 | | (USB_PORT_STAT_C_RESET << 16) |
| 178 | | (USB_PORT_STAT_C_ENABLE << 16); |
| 179 | usb_hcd_poll_rh_status(musb_to_hcd(musb)); |
| 180 | |
| 181 | musb->vbuserr_retry = VBUSERR_RETRY_COUNT; |
| 182 | } |
| 183 | } |
| 184 | |
| 185 | void musb_root_disconnect(struct musb *musb) |
| 186 | { |
| 187 | musb->port1_status = (1 << USB_PORT_FEAT_POWER) |
| 188 | | (1 << USB_PORT_FEAT_C_CONNECTION); |
| 189 | |
| 190 | usb_hcd_poll_rh_status(musb_to_hcd(musb)); |
| 191 | musb->is_active = 0; |
| 192 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 193 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 194 | case OTG_STATE_A_SUSPEND: |
David Brownell | 1de00da | 2009-04-02 10:16:11 -0700 | [diff] [blame] | 195 | #ifdef CONFIG_USB_MUSB_OTG |
| 196 | if (is_otg_enabled(musb) |
| 197 | && musb->xceiv->host->b_hnp_enable) { |
| 198 | musb->xceiv->state = OTG_STATE_A_PERIPHERAL; |
| 199 | musb->g.is_a_peripheral = 1; |
| 200 | break; |
| 201 | } |
| 202 | #endif |
| 203 | /* FALLTHROUGH */ |
| 204 | case OTG_STATE_A_HOST: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 205 | musb->xceiv->state = OTG_STATE_A_WAIT_BCON; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 206 | musb->is_active = 0; |
| 207 | break; |
| 208 | case OTG_STATE_A_WAIT_VFALL: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 209 | musb->xceiv->state = OTG_STATE_B_IDLE; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 210 | break; |
| 211 | default: |
| 212 | DBG(1, "host disconnect (%s)\n", otg_state_string(musb)); |
| 213 | } |
| 214 | } |
| 215 | |
| 216 | |
| 217 | /*---------------------------------------------------------------------*/ |
| 218 | |
| 219 | /* Caller may or may not hold musb->lock */ |
| 220 | int musb_hub_status_data(struct usb_hcd *hcd, char *buf) |
| 221 | { |
| 222 | struct musb *musb = hcd_to_musb(hcd); |
| 223 | int retval = 0; |
| 224 | |
| 225 | /* called in_irq() via usb_hcd_poll_rh_status() */ |
| 226 | if (musb->port1_status & 0xffff0000) { |
| 227 | *buf = 0x02; |
| 228 | retval = 1; |
| 229 | } |
| 230 | return retval; |
| 231 | } |
| 232 | |
| 233 | int musb_hub_control( |
| 234 | struct usb_hcd *hcd, |
| 235 | u16 typeReq, |
| 236 | u16 wValue, |
| 237 | u16 wIndex, |
| 238 | char *buf, |
| 239 | u16 wLength) |
| 240 | { |
| 241 | struct musb *musb = hcd_to_musb(hcd); |
| 242 | u32 temp; |
| 243 | int retval = 0; |
| 244 | unsigned long flags; |
| 245 | |
| 246 | spin_lock_irqsave(&musb->lock, flags); |
| 247 | |
| 248 | if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { |
| 249 | spin_unlock_irqrestore(&musb->lock, flags); |
| 250 | return -ESHUTDOWN; |
| 251 | } |
| 252 | |
| 253 | /* hub features: always zero, setting is a NOP |
| 254 | * port features: reported, sometimes updated when host is active |
| 255 | * no indicators |
| 256 | */ |
| 257 | switch (typeReq) { |
| 258 | case ClearHubFeature: |
| 259 | case SetHubFeature: |
| 260 | switch (wValue) { |
| 261 | case C_HUB_OVER_CURRENT: |
| 262 | case C_HUB_LOCAL_POWER: |
| 263 | break; |
| 264 | default: |
| 265 | goto error; |
| 266 | } |
| 267 | break; |
| 268 | case ClearPortFeature: |
| 269 | if ((wIndex & 0xff) != 1) |
| 270 | goto error; |
| 271 | |
| 272 | switch (wValue) { |
| 273 | case USB_PORT_FEAT_ENABLE: |
| 274 | break; |
| 275 | case USB_PORT_FEAT_SUSPEND: |
| 276 | musb_port_suspend(musb, false); |
| 277 | break; |
| 278 | case USB_PORT_FEAT_POWER: |
| 279 | if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) |
| 280 | musb_set_vbus(musb, 0); |
| 281 | break; |
| 282 | case USB_PORT_FEAT_C_CONNECTION: |
| 283 | case USB_PORT_FEAT_C_ENABLE: |
| 284 | case USB_PORT_FEAT_C_OVER_CURRENT: |
| 285 | case USB_PORT_FEAT_C_RESET: |
| 286 | case USB_PORT_FEAT_C_SUSPEND: |
| 287 | break; |
| 288 | default: |
| 289 | goto error; |
| 290 | } |
| 291 | DBG(5, "clear feature %d\n", wValue); |
| 292 | musb->port1_status &= ~(1 << wValue); |
| 293 | break; |
| 294 | case GetHubDescriptor: |
| 295 | { |
| 296 | struct usb_hub_descriptor *desc = (void *)buf; |
| 297 | |
| 298 | desc->bDescLength = 9; |
| 299 | desc->bDescriptorType = 0x29; |
| 300 | desc->bNbrPorts = 1; |
Harvey Harrison | 551509d | 2009-02-11 14:11:36 -0800 | [diff] [blame] | 301 | desc->wHubCharacteristics = cpu_to_le16( |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 302 | 0x0001 /* per-port power switching */ |
| 303 | | 0x0010 /* no overcurrent reporting */ |
| 304 | ); |
| 305 | desc->bPwrOn2PwrGood = 5; /* msec/2 */ |
| 306 | desc->bHubContrCurrent = 0; |
| 307 | |
| 308 | /* workaround bogus struct definition */ |
| 309 | desc->DeviceRemovable[0] = 0x02; /* port 1 */ |
| 310 | desc->DeviceRemovable[1] = 0xff; |
| 311 | } |
| 312 | break; |
| 313 | case GetHubStatus: |
| 314 | temp = 0; |
| 315 | *(__le32 *) buf = cpu_to_le32(temp); |
| 316 | break; |
| 317 | case GetPortStatus: |
| 318 | if (wIndex != 1) |
| 319 | goto error; |
| 320 | |
| 321 | /* finish RESET signaling? */ |
| 322 | if ((musb->port1_status & USB_PORT_STAT_RESET) |
| 323 | && time_after_eq(jiffies, musb->rh_timer)) |
| 324 | musb_port_reset(musb, false); |
| 325 | |
| 326 | /* finish RESUME signaling? */ |
| 327 | if ((musb->port1_status & MUSB_PORT_STAT_RESUME) |
| 328 | && time_after_eq(jiffies, musb->rh_timer)) { |
| 329 | u8 power; |
| 330 | |
| 331 | power = musb_readb(musb->mregs, MUSB_POWER); |
| 332 | power &= ~MUSB_POWER_RESUME; |
| 333 | DBG(4, "root port resume stopped, power %02x\n", |
| 334 | power); |
| 335 | musb_writeb(musb->mregs, MUSB_POWER, power); |
| 336 | |
| 337 | /* ISSUE: DaVinci (RTL 1.300) disconnects after |
| 338 | * resume of high speed peripherals (but not full |
| 339 | * speed ones). |
| 340 | */ |
| 341 | |
| 342 | musb->is_active = 1; |
| 343 | musb->port1_status &= ~(USB_PORT_STAT_SUSPEND |
| 344 | | MUSB_PORT_STAT_RESUME); |
| 345 | musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; |
| 346 | usb_hcd_poll_rh_status(musb_to_hcd(musb)); |
| 347 | /* NOTE: it might really be A_WAIT_BCON ... */ |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 348 | musb->xceiv->state = OTG_STATE_A_HOST; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 349 | } |
| 350 | |
| 351 | put_unaligned(cpu_to_le32(musb->port1_status |
| 352 | & ~MUSB_PORT_STAT_RESUME), |
| 353 | (__le32 *) buf); |
| 354 | |
| 355 | /* port change status is more interesting */ |
| 356 | DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n", |
| 357 | musb->port1_status); |
| 358 | break; |
| 359 | case SetPortFeature: |
| 360 | if ((wIndex & 0xff) != 1) |
| 361 | goto error; |
| 362 | |
| 363 | switch (wValue) { |
| 364 | case USB_PORT_FEAT_POWER: |
| 365 | /* NOTE: this controller has a strange state machine |
| 366 | * that involves "requesting sessions" according to |
| 367 | * magic side effects from incompletely-described |
| 368 | * rules about startup... |
| 369 | * |
| 370 | * This call is what really starts the host mode; be |
| 371 | * very careful about side effects if you reorder any |
| 372 | * initialization logic, e.g. for OTG, or change any |
| 373 | * logic relating to VBUS power-up. |
| 374 | */ |
| 375 | if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) |
| 376 | musb_start(musb); |
| 377 | break; |
| 378 | case USB_PORT_FEAT_RESET: |
| 379 | musb_port_reset(musb, true); |
| 380 | break; |
| 381 | case USB_PORT_FEAT_SUSPEND: |
| 382 | musb_port_suspend(musb, true); |
| 383 | break; |
| 384 | case USB_PORT_FEAT_TEST: |
| 385 | if (unlikely(is_host_active(musb))) |
| 386 | goto error; |
| 387 | |
| 388 | wIndex >>= 8; |
| 389 | switch (wIndex) { |
| 390 | case 1: |
| 391 | pr_debug("TEST_J\n"); |
| 392 | temp = MUSB_TEST_J; |
| 393 | break; |
| 394 | case 2: |
| 395 | pr_debug("TEST_K\n"); |
| 396 | temp = MUSB_TEST_K; |
| 397 | break; |
| 398 | case 3: |
| 399 | pr_debug("TEST_SE0_NAK\n"); |
| 400 | temp = MUSB_TEST_SE0_NAK; |
| 401 | break; |
| 402 | case 4: |
| 403 | pr_debug("TEST_PACKET\n"); |
| 404 | temp = MUSB_TEST_PACKET; |
| 405 | musb_load_testpacket(musb); |
| 406 | break; |
| 407 | case 5: |
| 408 | pr_debug("TEST_FORCE_ENABLE\n"); |
| 409 | temp = MUSB_TEST_FORCE_HOST |
| 410 | | MUSB_TEST_FORCE_HS; |
| 411 | |
| 412 | musb_writeb(musb->mregs, MUSB_DEVCTL, |
| 413 | MUSB_DEVCTL_SESSION); |
| 414 | break; |
| 415 | case 6: |
| 416 | pr_debug("TEST_FIFO_ACCESS\n"); |
| 417 | temp = MUSB_TEST_FIFO_ACCESS; |
| 418 | break; |
| 419 | default: |
| 420 | goto error; |
| 421 | } |
| 422 | musb_writeb(musb->mregs, MUSB_TESTMODE, temp); |
| 423 | break; |
| 424 | default: |
| 425 | goto error; |
| 426 | } |
| 427 | DBG(5, "set feature %d\n", wValue); |
| 428 | musb->port1_status |= 1 << wValue; |
| 429 | break; |
| 430 | |
| 431 | default: |
| 432 | error: |
| 433 | /* "protocol stall" on error */ |
| 434 | retval = -EPIPE; |
| 435 | } |
| 436 | spin_unlock_irqrestore(&musb->lock, flags); |
| 437 | return retval; |
| 438 | } |