| /* |
| * Copyright (c) 2017-2018,2021 The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "RoutingDriverWrapper.h" |
| #include "HeaderInsertion.h" |
| #include "Filtering.h" |
| #include "IPAFilteringTable.h" |
| #include "hton.h" // for htonl |
| #include "TestsUtils.h" |
| #include <string.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <sys/ioctl.h> |
| |
| #define IPV4_DST_ADDR_OFFSET (16) |
| |
| class IPAHeaderInsertionTestFixture: public TestBase { |
| public: |
| |
| IPAHeaderInsertionTestFixture() : m_uBufferSize(0) |
| { |
| memset(m_aBuffer, 0, sizeof(m_aBuffer)); |
| m_testSuiteName.push_back("Insertion"); |
| } |
| |
| virtual bool AddRules() = 0; |
| virtual bool ModifyPackets() = 0; |
| virtual bool TestLogic() = 0; |
| |
| bool Setup() |
| { |
| |
| ConfigureScenario(PHASE_FIVE_TEST_CONFIGURATION); |
| |
| m_producer.Open(INTERFACE0_TO_IPA_DATA_PATH, |
| INTERFACE0_FROM_IPA_DATA_PATH); |
| m_Consumer1.Open(INTERFACE1_TO_IPA_DATA_PATH, |
| INTERFACE1_FROM_IPA_DATA_PATH); |
| m_Consumer2.Open(INTERFACE2_TO_IPA_DATA_PATH, |
| INTERFACE2_FROM_IPA_DATA_PATH); |
| m_Consumer3.Open(INTERFACE3_TO_IPA_DATA_PATH, |
| INTERFACE3_FROM_IPA_DATA_PATH); |
| |
| if (!m_Routing.DeviceNodeIsOpened()) { |
| LOG_MSG_ERROR( |
| "Routing block is not ready for immediate commands!\n"); |
| return false; |
| } |
| if (!m_Filtering.DeviceNodeIsOpened()) { |
| LOG_MSG_ERROR( |
| "Filtering block is not ready for immediate commands!\n"); |
| return false; |
| } |
| if (!m_HeaderInsertion.DeviceNodeIsOpened()) |
| { |
| LOG_MSG_ERROR("Header Insertion block is not ready for immediate commands!\n"); |
| return false; |
| } |
| m_HeaderInsertion.Reset();// resetting this component will reset both Routing and Filtering tables. |
| |
| return true; |
| } // Setup() |
| |
| bool Run() |
| { |
| m_uBufferSize = BUFF_MAX_SIZE; |
| LOG_MSG_STACK("Entering Function"); |
| |
| // Add the relevant filtering rules |
| if (!AddRules()) { |
| LOG_MSG_ERROR("Failed adding filtering rules."); |
| return false; |
| } |
| // Load input data (IP packet) from file |
| if (!LoadDefaultPacket(m_eIP, m_aBuffer, m_uBufferSize)) { |
| LOG_MSG_ERROR("Failed default Packet"); |
| return false; |
| } |
| if (!ModifyPackets()) { |
| LOG_MSG_ERROR("Failed to modify packets."); |
| return false; |
| } |
| if (!TestLogic()) { |
| LOG_MSG_ERROR("Test failed, Input and expected output mismatch."); |
| return false; |
| } |
| |
| LOG_MSG_STACK("Leaving Function (Returning True)"); |
| return true; |
| } // Run() |
| |
| bool Teardown() |
| { |
| m_HeaderInsertion.Reset();// resetting this component will reset both Routing and Filtering tables. |
| m_producer.Close(); |
| m_Consumer1.Close(); |
| m_Consumer2.Close(); |
| m_Consumer3.Close(); |
| return true; |
| } // Teardown() |
| |
| unsigned GetHdrSramSize() |
| { |
| int fd; |
| struct ipa_test_mem_partition mem_part; |
| |
| fd = open("/dev/ipa_test", O_RDONLY); |
| if (fd < 0) { |
| printf("Failed opening %s. errno %d: %s\n", "/dev/ipa_test", |
| errno, strerror(errno)); |
| return 0; |
| } |
| |
| if (ioctl(fd, IPA_TEST_IOC_GET_MEM_PART, &mem_part) < 0) { |
| printf("Failed ioctl IPA_TEST_IOC_GET_MEM_PART. errno %d: %s\n", |
| errno, strerror(errno)); |
| close(fd); |
| return 0; |
| } |
| |
| close(fd); |
| |
| return mem_part.apps_hdr_size; |
| } |
| |
| ~IPAHeaderInsertionTestFixture() {} |
| |
| static RoutingDriverWrapper m_Routing; |
| static Filtering m_Filtering; |
| static HeaderInsertion m_HeaderInsertion; |
| InterfaceAbstraction m_producer; |
| InterfaceAbstraction m_Consumer1; |
| InterfaceAbstraction m_Consumer2; |
| InterfaceAbstraction m_Consumer3; |
| |
| protected: |
| static const size_t BUFF_MAX_SIZE = 1024; |
| static const uint8_t MAX_HEADER_SIZE = 64; // 64Bytes - Max Header Length |
| enum ipa_ip_type m_eIP; |
| uint8_t m_aBuffer[BUFF_MAX_SIZE]; // Input file \ IP packet |
| size_t m_uBufferSize; |
| |
| }; |
| RoutingDriverWrapper IPAHeaderInsertionTestFixture::m_Routing; |
| Filtering IPAHeaderInsertionTestFixture::m_Filtering; |
| HeaderInsertion IPAHeaderInsertionTestFixture::m_HeaderInsertion; |
| |
| //---------------------------------------------------------------------------/ |
| // Test002: Test that 802.3 header was inserted Correctly / |
| //---------------------------------------------------------------------------/ |
| class IPAHeaderInsertionTest001: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest001() { |
| m_name = "IPAHeaderInsertionTest001"; |
| m_description = |
| "Header Insertion Test 001 - Test RMNet Header Insertion\ |
| 1. Generate and commit RMNet.3 header Insertion \ |
| 2. Generate and commit routing table containing bypass rule. \ |
| 3. Generate and commit bypass filtering rule. \ |
| 4. Send a packet, and verify that the RMNet.3 Header was inserted correctly."; |
| Register(*this); |
| uint8_t aRMNetHeader[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06}; |
| m_nHeadertoAddSize = sizeof(aRMNetHeader); |
| memcpy(m_aHeadertoAdd, aRMNetHeader, m_nHeadertoAddSize); |
| } |
| |
| // Test Description: |
| // 1. Generate and commit single bypass routing table. |
| virtual bool AddRules() { |
| m_eIP = IPA_IP_v4; |
| const char bypass0[20] = "Bypass0"; |
| struct ipa_ioc_get_rt_tbl sRoutingTable; |
| bool bRetVal = true; |
| struct ipa_ioc_get_hdr sRetHeader; |
| IPAFilteringTable cFilterTable; |
| struct ipa_flt_rule_add sFilterRuleEntry; |
| uint32_t nRTTableHdl=0; |
| memset(&sRoutingTable, 0, sizeof(sRoutingTable)); |
| memset(&sRetHeader, 0, sizeof(sRetHeader)); |
| strlcpy(sRetHeader.name, "IEEE802_3", sizeof(sRetHeader.name)); |
| |
| LOG_MSG_STACK("Entering Function"); |
| // Create Header: |
| // Allocate Memory, populate it, and add in to the Header Insertion. |
| struct ipa_ioc_add_hdr * pHeaderDescriptor = NULL; |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) |
| + 1 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) { |
| LOG_MSG_ERROR("calloc failed to allocate pHeaderDescriptor"); |
| bRetVal = false; |
| goto bail; |
| } |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| strlcpy(pHeaderDescriptor->hdr[0].name, sRetHeader.name, sizeof(pHeaderDescriptor->hdr[0].name)); |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, |
| m_nHeadertoAddSize); //Header's Data |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| strlcpy(sRetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(sRetHeader.name)); |
| |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!m_HeaderInsertion.GetHeaderHandle(&sRetHeader)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, bypass0, IPA_CLIENT_TEST2_CONS, |
| sRetHeader.hdl,&nRTTableHdl)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_INFO("CreateBypassRoutingTable completed successfully"); |
| sRoutingTable.ip = m_eIP; |
| strlcpy(sRoutingTable.name, bypass0, sizeof(sRoutingTable.name)); |
| if (!m_Routing.GetRoutingTable(&sRoutingTable)) { |
| LOG_MSG_ERROR( |
| "m_routing.GetRoutingTable(&sRoutingTable=0x%p) Failed.", &sRoutingTable); |
| bRetVal = false; |
| goto bail; |
| } |
| // Creating Filtering Rules |
| cFilterTable.Init(m_eIP,IPA_CLIENT_TEST_PROD,false,1); |
| LOG_MSG_INFO("Creation of filtering table completed successfully"); |
| |
| // Configuring Filtering Rule No.1 |
| cFilterTable.GeneratePresetRule(0,sFilterRuleEntry); |
| sFilterRuleEntry.at_rear = true; |
| sFilterRuleEntry.flt_rule_hdl = -1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.action = IPA_PASS_TO_ROUTING; |
| sFilterRuleEntry.rule.rt_tbl_hdl = nRTTableHdl; //put here the handle corresponding to Routing Rule 1 |
| if ( |
| ((uint8_t)-1 == cFilterTable.AddRuleToTable(sFilterRuleEntry)) || |
| !m_Filtering.AddFilteringRule(cFilterTable.GetFilteringTable()) |
| ) |
| { |
| LOG_MSG_ERROR ("Adding Rule (0) to Filtering block Failed."); |
| bRetVal = false; |
| goto bail; |
| } else |
| { |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", cFilterTable.ReadRuleFromTable(0)->flt_rule_hdl,cFilterTable.ReadRuleFromTable(0)->status); |
| } |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK( |
| "Leaving Function (Returning %s)", bRetVal?"True":"False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| virtual bool TestLogic() { |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| m_aExpectedBufSize = 0; |
| |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd, m_nHeadertoAddSize); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer1, m_aExpectedBuffer, m_aExpectedBufSize)) { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| return false; |
| } |
| return true; |
| } |
| private: |
| uint8_t m_aExpectedBuffer[BUFF_MAX_SIZE]; // Input file / IP packet |
| size_t m_aExpectedBufSize; |
| uint8_t m_aHeadertoAdd[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize; |
| }; |
| |
| //---------------------------------------------------------------------------/ |
| // Test002: Test that 802.3 header was inserted Correctly / |
| //---------------------------------------------------------------------------/ |
| class IPAHeaderInsertionTest002: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest002() { |
| m_name = "IPAHeaderInsertionTest002"; |
| m_description = |
| "Header Insertion Test 002 - Test IEEE802.3 Header Insertion\ |
| 1. Generate and commit IEEE802.3 header Insertion \ |
| 2. Generate and commit routing table containing bypass rule. \ |
| 3. Generate and commit bypass filtering rule. \ |
| 4. Send a packet, and verify that the IEEE802.3 Header was inserted correctly \ |
| and that the header Length was updated as well"; |
| Register(*this); |
| uint8_t aIEEE802_3Header[22] = { 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, |
| 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0x00, 0x46, 0xAE, 0xAF, 0xB0,// the correct size (00 46) is inserted here. |
| 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6 }; |
| m_nHeadertoAddSize = sizeof(aIEEE802_3Header); |
| memcpy(m_aHeadertoAdd, aIEEE802_3Header, m_nHeadertoAddSize); |
| } |
| |
| // Test Description: |
| // 1. Generate and commit single bypass routing table. |
| virtual bool AddRules() { |
| m_eIP = IPA_IP_v4; |
| const char bypass0[20] = "Bypass0"; |
| struct ipa_ioc_get_rt_tbl sRoutingTable; |
| bool bRetVal = true; |
| struct ipa_ioc_get_hdr sRetHeader; |
| IPAFilteringTable cFilterTable; |
| struct ipa_flt_rule_add sFilterRuleEntry; |
| uint32_t nRTTableHdl=0; |
| memset(&sRoutingTable, 0, sizeof(sRoutingTable)); |
| memset(&sRetHeader, 0, sizeof(sRetHeader)); |
| strlcpy(sRetHeader.name, "IEEE802_3", sizeof(sRetHeader.name)); |
| |
| LOG_MSG_STACK("Entering Function"); |
| // Create Header: |
| // Allocate Memory, populate it, and add in to the Header Insertion. |
| struct ipa_ioc_add_hdr * pHeaderDescriptor = NULL; |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) |
| + 1 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) { |
| LOG_MSG_ERROR("calloc failed to allocate pHeaderDescriptor"); |
| bRetVal = false; |
| goto bail; |
| } |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| strlcpy(pHeaderDescriptor->hdr[0].name, sRetHeader.name, sizeof(pHeaderDescriptor->hdr[0].name)); // Header's Name |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, |
| m_nHeadertoAddSize); //Header's Data |
| pHeaderDescriptor->hdr[0].hdr[12] = 0x00; //set length to zero, to confirm if ipa updates or not |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| strlcpy(sRetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(sRetHeader.name)); |
| |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!m_HeaderInsertion.GetHeaderHandle(&sRetHeader)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, bypass0, IPA_CLIENT_TEST3_CONS, |
| sRetHeader.hdl,&nRTTableHdl)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_INFO("CreateBypassRoutingTable completed successfully"); |
| sRoutingTable.ip = m_eIP; |
| strlcpy(sRoutingTable.name, bypass0, sizeof(sRoutingTable.name)); |
| if (!m_Routing.GetRoutingTable(&sRoutingTable)) { |
| LOG_MSG_ERROR( |
| "m_routing.GetRoutingTable(&sRoutingTable=0x%p) Failed.", &sRoutingTable); |
| bRetVal = false; |
| goto bail; |
| } |
| // Creating Filtering Rules |
| cFilterTable.Init(m_eIP,IPA_CLIENT_TEST_PROD,false,1); |
| LOG_MSG_INFO("Creation of filtering table completed successfully"); |
| |
| // Configuring Filtering Rule No.1 |
| cFilterTable.GeneratePresetRule(0,sFilterRuleEntry); |
| sFilterRuleEntry.at_rear = true; |
| sFilterRuleEntry.flt_rule_hdl = -1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.action = IPA_PASS_TO_ROUTING; |
| sFilterRuleEntry.rule.rt_tbl_hdl = nRTTableHdl; //put here the handle corresponding to Routing Rule 1 |
| if ( |
| ((uint8_t)-1 == cFilterTable.AddRuleToTable(sFilterRuleEntry)) || |
| !m_Filtering.AddFilteringRule(cFilterTable.GetFilteringTable()) |
| ) |
| { |
| LOG_MSG_ERROR ("Adding Rule (0) to Filtering block Failed."); |
| bRetVal = false; |
| goto bail; |
| } else |
| { |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", cFilterTable.ReadRuleFromTable(0)->flt_rule_hdl,cFilterTable.ReadRuleFromTable(0)->status); |
| } |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK( |
| "Leaving Function (Returning %s)", bRetVal?"True":"False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| virtual bool TestLogic() { |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| m_aExpectedBufSize = 0; |
| |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd, m_nHeadertoAddSize); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer2, m_aExpectedBuffer, m_aExpectedBufSize)) { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| return false; |
| } |
| return true; |
| } |
| private: |
| uint8_t m_aExpectedBuffer[BUFF_MAX_SIZE]; // Input file / IP packet |
| size_t m_aExpectedBufSize; |
| uint8_t m_aHeadertoAdd[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize; |
| }; |
| |
| //---------------------------------------------------------------------------/ |
| // Test003: Test Three Different Header Insertions / |
| //---------------------------------------------------------------------------/ |
| class IPAHeaderInsertionTest003: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest003() : |
| m_aExpectedBufSize(BUFF_MAX_SIZE), |
| m_nHeadertoAddSize1(0), |
| m_nHeadertoAddSize2(0), |
| m_nHeadertoAddSize3(0) |
| { |
| m_name = "IPAHeaderInsertionTest003"; |
| m_description = |
| "Header Insertion Test 003 - Test RmNet,IEEE802.3 and IEEE802.3 with const (1) addition to the length field\ |
| 1. Generate and commit two types of header Insertion RmNet and IEE802.3 \ |
| 2. Generate and commit three routing tables. \ |
| Each table contains a single \"bypass\" rule (all data goes to output pipe 0, 1 and 2 (accordingly)) \ |
| Routing table 1 is used to add RmNet Header \ |
| Routing table 2 is used to add IEEE802.3 Header (requires update of the Length field) \ |
| Routing table 3 is used to add IEEE802.3 Header with additional const (1) to the length field \ |
| 3. Generate and commit Three filtering rules (MASK = 0xFF..FF). \ |
| All DST_IP == 127.0.0.1 traffic goes to routing table 1 \ |
| All DST_IP == 192.169.1.1 traffic goes to routing table 2 \ |
| All DST_IP == 192.169.1.2 traffic goes to routing table 3"; |
| |
| Register(*this); |
| uint8_t aRMNetHeader[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06}; |
| uint8_t aIEEE802_3Header1[22] = { 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, |
| 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0x00, 0x46, 0xAE, 0xAF, 0xB0, |
| 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6 }; |
| uint8_t aIEEE802_3Header2[22] = { 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, |
| 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0x00, 0x47, 0xAE, 0xAF, 0xB0, |
| 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6 }; |
| m_nHeadertoAddSize1 = sizeof(aRMNetHeader); |
| memcpy(m_aHeadertoAdd1, aRMNetHeader, m_nHeadertoAddSize1); |
| m_nHeadertoAddSize2 = sizeof(aIEEE802_3Header1); |
| memcpy(m_aHeadertoAdd2, aIEEE802_3Header1, m_nHeadertoAddSize2); |
| m_nHeadertoAddSize3 = sizeof(aIEEE802_3Header2); |
| memcpy(m_aHeadertoAdd3, aIEEE802_3Header2, m_nHeadertoAddSize3); |
| } |
| |
| // Test Description: |
| // 1. Generate and commit single bypass routing table. |
| virtual bool AddRules() { |
| m_eIP = IPA_IP_v4; |
| const char aBypass1[20] = "Bypass1"; |
| const char aBypass2[20] = "Bypass2"; |
| const char aBypass3[20] = "Bypass3"; |
| uint32_t nTableHdl01, nTableHdl02, nTableHdl03; |
| bool bRetVal = true; |
| IPAFilteringTable cFilterTable0; |
| struct ipa_flt_rule_add sFilterRuleEntry; |
| struct ipa_ioc_get_hdr sGetHeader1,sGetHeader2; |
| |
| LOG_MSG_STACK("Entering Function"); |
| memset(&sFilterRuleEntry, 0, sizeof(sFilterRuleEntry)); |
| memset(&sGetHeader1, 0, sizeof(sGetHeader1)); |
| memset(&sGetHeader2, 0, sizeof(sGetHeader2)); |
| // Create Header: |
| // Allocate Memory, populate it, and add in to the Header Insertion. |
| struct ipa_ioc_add_hdr * pHeaderDescriptor = NULL; |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) |
| + 2 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) { |
| LOG_MSG_ERROR("calloc failed to allocate pHeaderDescriptor"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 2; |
| // Adding Header No1. |
| strlcpy(pHeaderDescriptor->hdr[0].name, "RMNet", sizeof(pHeaderDescriptor->hdr[0].name)); // Header's Name |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd1, |
| m_nHeadertoAddSize1); //Header's Data |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize1; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| |
| // Adding Header No2. |
| strlcpy(pHeaderDescriptor->hdr[1].name, "IEEE_802_3", sizeof(pHeaderDescriptor->hdr[1].name)); // Header's Name |
| memcpy(pHeaderDescriptor->hdr[1].hdr, m_aHeadertoAdd2, |
| m_nHeadertoAddSize2); //Header's Data |
| pHeaderDescriptor->hdr[1].hdr_len = m_nHeadertoAddSize2; |
| pHeaderDescriptor->hdr[1].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[1].is_partial = false; |
| pHeaderDescriptor->hdr[1].status = -1; // Return Parameter |
| |
| strlcpy(sGetHeader1.name, pHeaderDescriptor->hdr[0].name, sizeof(sGetHeader1.name)); |
| strlcpy(sGetHeader2.name, pHeaderDescriptor->hdr[1].name, sizeof(sGetHeader2.name)); |
| |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!m_HeaderInsertion.GetHeaderHandle(&sGetHeader1)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_DEBUG("Received Header1 Handle = 0x%x",sGetHeader1.hdl); |
| if (!m_HeaderInsertion.GetHeaderHandle(&sGetHeader2)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_DEBUG("Received Header2 Handle = 0x%x",sGetHeader2.hdl); |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, aBypass1, IPA_CLIENT_TEST2_CONS, |
| sGetHeader1.hdl,&nTableHdl01)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, aBypass2, IPA_CLIENT_TEST3_CONS, |
| sGetHeader2.hdl,&nTableHdl02)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, aBypass3, IPA_CLIENT_TEST4_CONS, |
| sGetHeader2.hdl,&nTableHdl03)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_INFO("Creation of three bypass routing tables completed successfully TblHdl1=0x%x, TblHdl2=0x%x, TblHdl3=0x%x", |
| nTableHdl01,nTableHdl02,nTableHdl03); |
| |
| // Creating Filtering Rules |
| cFilterTable0.Init(m_eIP,IPA_CLIENT_TEST_PROD,false,3); |
| LOG_MSG_INFO("Creation of filtering table completed successfully"); |
| |
| // Configuring Filtering Rule No.1 |
| cFilterTable0.GeneratePresetRule(1,sFilterRuleEntry); |
| sFilterRuleEntry.at_rear = true; |
| sFilterRuleEntry.flt_rule_hdl=-1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.action=IPA_PASS_TO_ROUTING; |
| sFilterRuleEntry.rule.rt_tbl_hdl=nTableHdl01; //put here the handle corresponding to Routing Rule 1 |
| sFilterRuleEntry.rule.attrib.attrib_mask = IPA_FLT_DST_ADDR; // Destination IP Based Filtering |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr_mask = 0xFF0000FF; // Mask |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr = 0x7F000001; // Filter DST_IP == 127.0.0.1. |
| if ((uint8_t)-1 == cFilterTable0.AddRuleToTable(sFilterRuleEntry)) |
| { |
| LOG_MSG_ERROR ("Adding Rule (0) to Filtering table Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| // Configuring Filtering Rule No.2 |
| sFilterRuleEntry.flt_rule_hdl=-1; // return Value |
| sFilterRuleEntry.status = -1; // return Value |
| sFilterRuleEntry.rule.rt_tbl_hdl=nTableHdl02; //put here the handle corresponding to Routing Rule 2 |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr = 0xC0A80101; // Filter DST_IP == 192.168.1.1. |
| if ((uint8_t)-1 == cFilterTable0.AddRuleToTable(sFilterRuleEntry)) |
| { |
| LOG_MSG_ERROR ("Adding Rule(1) to Filtering table Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| // Configuring Filtering Rule No.3 |
| sFilterRuleEntry.flt_rule_hdl=-1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.rt_tbl_hdl=nTableHdl03; //put here the handle corresponding to Routing Rule 2 |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr = 0xC0A80102; // Filter DST_IP == 192.168.1.2. |
| if ((uint8_t)-1 == cFilterTable0.AddRuleToTable(sFilterRuleEntry)) |
| { |
| LOG_MSG_ERROR ("Adding Rule(2) to Filtering table Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| if (!m_Filtering.AddFilteringRule(cFilterTable0.GetFilteringTable())) { |
| LOG_MSG_ERROR ("Failed to commit Filtering rules"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", cFilterTable0.ReadRuleFromTable(0)->flt_rule_hdl,cFilterTable0.ReadRuleFromTable(0)->status); |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", cFilterTable0.ReadRuleFromTable(1)->flt_rule_hdl,cFilterTable0.ReadRuleFromTable(1)->status); |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", cFilterTable0.ReadRuleFromTable(2)->flt_rule_hdl,cFilterTable0.ReadRuleFromTable(2)->status); |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK( |
| "Leaving Function (Returning %s)", bRetVal?"True":"False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| virtual bool TestLogic() { |
| bool bRetVal = true; |
| m_aExpectedBufSize = 0; |
| uint32_t nIPv4DSTAddr; |
| |
| LOG_MSG_STACK("Entering Function"); |
| |
| //Packet No. 1 |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| nIPv4DSTAddr = ntohl(0x7F000001); |
| memcpy (&m_aBuffer[IPV4_DST_ADDR_OFFSET],&nIPv4DSTAddr,sizeof(nIPv4DSTAddr)); |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd1, m_nHeadertoAddSize1); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize1,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize1 + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer1, m_aExpectedBuffer, m_aExpectedBufSize)) |
| { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| bRetVal=false; |
| } |
| |
| //Packet No. 2 |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| nIPv4DSTAddr = ntohl(0xC0A80101);//192.168.1.1 |
| memcpy (&m_aBuffer[IPV4_DST_ADDR_OFFSET],&nIPv4DSTAddr,sizeof(nIPv4DSTAddr)); |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd2, m_nHeadertoAddSize2); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize2,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize2 + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer2, m_aExpectedBuffer, m_aExpectedBufSize)) |
| { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| bRetVal=false; |
| } |
| |
| //Packet No. 3 |
| nIPv4DSTAddr = ntohl(0xC0A80102);//192.168.1.2 |
| memcpy (&m_aBuffer[IPV4_DST_ADDR_OFFSET],&nIPv4DSTAddr,sizeof(nIPv4DSTAddr)); |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd3, m_nHeadertoAddSize3); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize3,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize3 + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer3, m_aExpectedBuffer, m_aExpectedBufSize)) |
| { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| bRetVal=false; |
| } |
| |
| LOG_MSG_STACK("Leaving Function (Returning %s)",bRetVal?"True":"False"); |
| return bRetVal; |
| } |
| private: |
| uint8_t m_aExpectedBuffer[BUFF_MAX_SIZE]; // Input file / IP packet |
| size_t m_aExpectedBufSize; |
| uint8_t m_aHeadertoAdd1[MAX_HEADER_SIZE],m_aHeadertoAdd2[MAX_HEADER_SIZE],m_aHeadertoAdd3[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize1,m_nHeadertoAddSize2,m_nHeadertoAddSize3; |
| }; |
| |
| class IPAHeaderInsertionTest004: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest004() { |
| m_name = "IPAHeaderInsertionTest004"; |
| m_description = |
| "Header Insertion Test 004 - Test header insertion with bad len values."; |
| Register(*this); |
| uint8_t aRMNetHeader[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06}; |
| m_nHeadertoAddSize = sizeof(aRMNetHeader); |
| memcpy(m_aHeadertoAdd, aRMNetHeader, m_nHeadertoAddSize); |
| } |
| |
| virtual bool AddRules() { |
| // Not adding any rules here. |
| return true; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| bool AddSingleHeaderAndCheck(uint8_t len) { |
| m_eIP = IPA_IP_v4; |
| bool bRetVal = true; |
| struct ipa_ioc_get_hdr sRetHeader; |
| memset(&sRetHeader, 0, sizeof(sRetHeader)); |
| strlcpy(sRetHeader.name, "Generic", sizeof(sRetHeader.name)); |
| |
| LOG_MSG_STACK("Entering Function"); |
| // Create Header: |
| // Allocate Memory, populate it, and add in to the Header Insertion. |
| struct ipa_ioc_add_hdr * pHeaderDescriptor = NULL; |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) |
| + 1 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) { |
| LOG_MSG_ERROR("calloc failed to allocate pHeaderDescriptor"); |
| bRetVal = false; |
| goto bail; |
| } |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| strlcpy(pHeaderDescriptor->hdr[0].name, sRetHeader.name, sizeof(pHeaderDescriptor->hdr[0].name)); |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, |
| m_nHeadertoAddSize); //Header's Data |
| pHeaderDescriptor->hdr[0].hdr_len = len; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| strlcpy(sRetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(sRetHeader.name)); |
| |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| if (!m_HeaderInsertion.GetHeaderHandle(&sRetHeader)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK( |
| "Leaving Function (Returning %s)", bRetVal?"True":"False"); |
| return bRetVal; |
| } // AddSingleHeaderAndCheck() |
| |
| virtual bool TestLogic() { |
| |
| // Try to add headers with invalid values. |
| // Valid values are between 1 to IPA_HDR_MAX_SIZE (64). |
| // We expect the below functions to fail. |
| if (AddSingleHeaderAndCheck(0)) { |
| LOG_MSG_ERROR("This is unexpected, this can't succeed"); |
| return false; |
| } |
| |
| if (AddSingleHeaderAndCheck(MAX_HEADER_SIZE + 1)) { |
| LOG_MSG_ERROR("This is unexpected, this can't succeed"); |
| return false; |
| } |
| |
| // Add one header which is OK |
| if (!AddSingleHeaderAndCheck(m_nHeadertoAddSize)) { |
| LOG_MSG_ERROR("This is unexpected, this can't succeed"); |
| return false; |
| } |
| return true; |
| } |
| |
| private: |
| uint8_t m_aHeadertoAdd[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize; |
| }; |
| |
| class IPAHeaderInsertionTest005: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest005() { |
| m_name = "IPAHeaderInsertionTest005"; |
| m_description = |
| "Header Insertion Test 005 - Test Multiple RMNet Header Insertion\ |
| - Stress test - Generate and commit multiple header Insertion"; |
| this->m_runInRegression = false; |
| Register(*this); |
| uint8_t aRMNetHeader[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06}; |
| m_nHeadertoAddSize = sizeof(aRMNetHeader); |
| memcpy(m_aHeadertoAdd, aRMNetHeader, m_nHeadertoAddSize); |
| } |
| |
| // Test Description: |
| // 1. Generate and commit single bypass routing table. |
| virtual bool AddRules() { |
| m_eIP = IPA_IP_v4; |
| bool bRetVal = true; |
| struct ipa_ioc_get_hdr sRetHeader; |
| char Name[] = "IEEE802_3\0"; |
| |
| memset(&sRetHeader, 0, sizeof(sRetHeader)); |
| strlcpy (sRetHeader.name, Name, sizeof(sRetHeader.name)); |
| LOG_MSG_STACK("Entering Function"); |
| // Create Header: |
| // Allocate Memory, populate it, and add in to the Header Insertion. |
| struct ipa_ioc_add_hdr * pHeaderDescriptor = NULL; |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) |
| + 1 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) { |
| LOG_MSG_ERROR("calloc failed to allocate pHeaderDescriptor"); |
| bRetVal = false; |
| goto bail; |
| } |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| strlcpy(pHeaderDescriptor->hdr[0].name, sRetHeader.name, sizeof(pHeaderDescriptor->hdr[0].name)); |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, |
| m_nHeadertoAddSize); //Header's Data |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| strlcpy(sRetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(sRetHeader.name)); |
| |
| // stress test to check if the target crashes, failure is expected before reaching 500 |
| for (int i = 0; i < 500; i++) { |
| LOG_MSG_DEBUG("IPAHeaderInsertionTest005::AddRules iter=%d\n",i); |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed on %d iteration.\n",i); |
| goto bail; |
| } |
| } |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK( |
| "Leaving Function (Returning %s)", bRetVal?"True":"False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| virtual bool TestLogic() { |
| return true; |
| } |
| private: |
| uint8_t m_aHeadertoAdd[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize; |
| }; |
| |
| class IPAHeaderInsertionTest006: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest006() { |
| m_name = "IPAHeaderInsertionTest006"; |
| m_description = |
| "Header Insertion Test 006 - Test header distriburion between SRAM and DDR\ |
| - fill SRAM and some DDR, use DDR header"; |
| this->m_runInRegression = true; |
| Register(*this); |
| uint8_t aRMNetHeader[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06}; |
| m_nHeadertoAddSize = sizeof(aRMNetHeader); |
| memcpy(m_aHeadertoAdd, aRMNetHeader, m_nHeadertoAddSize); |
| m_minIPAHwType = IPA_HW_v5_0; |
| |
| // The bin size is 8 |
| // We are going to add number of headers to occupy twice the size of the SRAM buffer |
| m_InitialHeadersNum = GetHdrSramSize() / 8 * 2; |
| m_HeadersNumToDelete = 0; |
| m_HeadersNumToAddAgain = 0; |
| } |
| |
| virtual bool AddRules() { |
| bool bRetVal = true; |
| m_eIP = IPA_IP_v4; |
| struct ipa_ioc_add_hdr *pHeaderDescriptor = NULL; |
| struct ipa_ioc_del_hdr *pDelHeaderDescriptor = NULL; |
| |
| memset(&m_RetHeader, 0, sizeof(m_RetHeader)); |
| LOG_MSG_STACK("Entering Function"); |
| |
| if (m_InitialHeadersNum <= 0) |
| { |
| LOG_MSG_ERROR("Initial headers number is set to 0!\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) + 1 * sizeof(struct ipa_hdr_add)); |
| if (m_HeadersNumToDelete > 0) |
| pDelHeaderDescriptor = (struct ipa_ioc_del_hdr *)calloc(1, |
| sizeof(struct ipa_ioc_del_hdr) + m_HeadersNumToDelete * sizeof(struct ipa_hdr_del)); |
| if (!pHeaderDescriptor || (m_HeadersNumToDelete > 0 && !pDelHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("calloc failed to allocate ipa_ioc_add_hdr or ipa_ioc_del_hdr"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| // Add bunch of headers to SRAM and DDR |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, m_nHeadertoAddSize); |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| |
| for (int i = 0; i < m_InitialHeadersNum; i++) |
| { |
| LOG_MSG_DEBUG("%s::%s iter=%d\n", typeid(this).name(), __func__, i); |
| snprintf(pHeaderDescriptor->hdr[0].name, sizeof(pHeaderDescriptor->hdr[0].name), "IEEE802_3_%03d", i); |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed on %d iteration.\n", i); |
| bRetVal = false; |
| goto bail; |
| } |
| // Store header descriptors to delete |
| if (m_HeadersNumToDelete > 0 && i < m_HeadersNumToDelete) { |
| pDelHeaderDescriptor->hdl[i].hdl = pHeaderDescriptor->hdr[0].hdr_hdl; |
| } |
| } |
| strlcpy(m_RetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(m_RetHeader.name)); |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| |
| |
| if (m_HeadersNumToDelete > 0) |
| { |
| // Delete few headers from SRAM |
| pDelHeaderDescriptor->commit = true; |
| pDelHeaderDescriptor->num_hdls = m_HeadersNumToDelete; |
| for (int i = 0; i < m_HeadersNumToDelete; i++) |
| pDelHeaderDescriptor->hdl[i].status = -1; // Return Parameter |
| if (!m_HeaderInsertion.DeleteHeader(pDelHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.DeleteHeader(pDelHeaderDescriptor) Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| } |
| |
| if (m_HeadersNumToAddAgain > 0) |
| { |
| // Add few new headers to SRAM |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd, m_nHeadertoAddSize); |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize; |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| |
| for (int i = 0; i < m_HeadersNumToAddAgain; i++) { |
| LOG_MSG_DEBUG("%s::%s iter=%d\n", typeid(this).name(), __func__, i); |
| snprintf(pHeaderDescriptor->hdr[0].name, sizeof(pHeaderDescriptor->hdr[0].name), "IEEE802_3_%03d_2", i); |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed on %d iteration.\n", i); |
| bRetVal = false; |
| goto bail; |
| } |
| } |
| strlcpy(m_RetHeader.name, pHeaderDescriptor->hdr[0].name, sizeof(m_RetHeader.name)); |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| } |
| |
| // Use last added header for traffic |
| if (!m_HeaderInsertion.GetHeaderHandle(&m_RetHeader)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| bRetVal = CreateFilteringAndRouting(); |
| bail: |
| Free(pHeaderDescriptor); |
| if (pDelHeaderDescriptor) |
| Free(pDelHeaderDescriptor); |
| LOG_MSG_STACK("Leaving %s (Returning %s)", __func__, bRetVal ? "True" : "False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool CreateFilteringAndRouting() { |
| uint32_t nRTTableHdl=0; |
| const char bypass0[20] = "Bypass0"; |
| struct ipa_ioc_get_rt_tbl sRoutingTable; |
| struct ipa_flt_rule_add sFilterRuleEntry; |
| IPAFilteringTable cFilterTable; |
| |
| memset(&sRoutingTable, 0, sizeof(sRoutingTable)); |
| |
| // Create RT table |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, bypass0, IPA_CLIENT_TEST2_CONS, |
| m_RetHeader.hdl,&nRTTableHdl)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| return false; |
| } |
| LOG_MSG_INFO("CreateBypassRoutingTable completed successfully"); |
| sRoutingTable.ip = m_eIP; |
| strlcpy(sRoutingTable.name, bypass0, sizeof(sRoutingTable.name)); |
| if (!m_Routing.GetRoutingTable(&sRoutingTable)) { |
| LOG_MSG_ERROR("m_routing.GetRoutingTable(&sRoutingTable=0x%p) Failed.", |
| &sRoutingTable); |
| return false; |
| } |
| |
| // Creating Filtering Rules |
| cFilterTable.Init(m_eIP, IPA_CLIENT_TEST_PROD, false, 1); |
| LOG_MSG_INFO("Creation of filtering table completed successfully"); |
| |
| // Configuring Filtering Rule No.1 |
| cFilterTable.GeneratePresetRule(0, sFilterRuleEntry); |
| sFilterRuleEntry.at_rear = true; |
| sFilterRuleEntry.flt_rule_hdl = -1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.action = IPA_PASS_TO_ROUTING; |
| sFilterRuleEntry.rule.rt_tbl_hdl = nRTTableHdl; //put here the handle corresponding to Routing Rule 1 |
| if (((uint8_t)-1 == cFilterTable.AddRuleToTable(sFilterRuleEntry)) || |
| !m_Filtering.AddFilteringRule(cFilterTable.GetFilteringTable())) |
| { |
| LOG_MSG_ERROR ("Adding Rule (0) to Filtering block Failed."); |
| return false; |
| } |
| else |
| { |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", |
| cFilterTable.ReadRuleFromTable(0)->flt_rule_hdl, |
| cFilterTable.ReadRuleFromTable(0)->status); |
| } |
| return true; |
| } |
| |
| virtual bool ModifyPackets() { |
| return true; |
| } |
| |
| virtual bool TestLogic() { |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| m_aExpectedBufSize = 0; |
| |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd, m_nHeadertoAddSize); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer1, m_aExpectedBuffer, m_aExpectedBufSize)) { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| return false; |
| } |
| return true; |
| } |
| |
| protected: |
| struct ipa_ioc_get_hdr m_RetHeader; |
| int m_InitialHeadersNum; |
| int m_HeadersNumToDelete; |
| int m_HeadersNumToAddAgain; |
| |
| private: |
| uint8_t m_aExpectedBuffer[BUFF_MAX_SIZE]; // Input file / IP packet |
| size_t m_aExpectedBufSize; |
| uint8_t m_aHeadertoAdd[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize; |
| int ret; |
| }; |
| |
| class IPAHeaderInsertionTest007: public IPAHeaderInsertionTest006 { |
| public: |
| IPAHeaderInsertionTest007() { |
| m_name = "IPAHeaderInsertionTest007"; |
| m_description = |
| "Header Insertion Test 007 - Test header distriburion between SRAM and DDR\ |
| - fill SRAM and some DDR, free some SRAM, use DDR header"; |
| // We will delete half of the headers in the SRAM, |
| // which is quarter of the total initial headers number |
| m_HeadersNumToDelete = m_InitialHeadersNum / 4; |
| m_HeadersNumToAddAgain = 0; |
| } |
| }; |
| |
| class IPAHeaderInsertionTest008: public IPAHeaderInsertionTest006 { |
| public: |
| IPAHeaderInsertionTest008() { |
| m_name = "IPAHeaderInsertionTest008"; |
| m_description = |
| "Header Insertion Test 008 - Test header distriburion between SRAM and DDR\ |
| - fill SRAM and some DDR, free some SRAM, add few new SRAM headers, \ |
| use last SRAM header"; |
| // We will delete half of the headers in the SRAM, |
| // which is quarter of the total initial headers number |
| m_HeadersNumToDelete = m_InitialHeadersNum / 4; |
| // We will add again half of the number of headers we deleted |
| m_HeadersNumToAddAgain = m_HeadersNumToDelete / 2; |
| } |
| }; |
| |
| class IPAHeaderInsertionTest009: public IPAHeaderInsertionTest006 { |
| public: |
| IPAHeaderInsertionTest009() { |
| m_name = "IPAHeaderInsertionTest009"; |
| m_description = |
| "Header Insertion Test 009 - Test header distriburion between SRAM and DDR \ |
| - fill SRAM and some DDR, free some SRAM and DDR, \ |
| add new SRAM and DDR headers, \ |
| use last added DDR header"; |
| // We will delete all the headers in SRAM and half of the headers in the DDR, |
| // which is 3/4 of the total initial headers number |
| m_HeadersNumToDelete = m_InitialHeadersNum - (m_InitialHeadersNum / 4); |
| // We will add again one less header than deleted |
| m_HeadersNumToAddAgain = m_InitialHeadersNum - m_HeadersNumToDelete - 1; |
| } |
| }; |
| |
| class IPAHeaderInsertionTest010: public IPAHeaderInsertionTestFixture { |
| public: |
| IPAHeaderInsertionTest010() : |
| m_aExpectedBufSize(BUFF_MAX_SIZE), |
| m_nHeadertoAddSize1(0), |
| m_nHeadertoAddSize2(0) |
| { |
| m_name = "IPAHeaderInsertionTest010"; |
| m_description = |
| "Header Insertion Test 010 - Test header distriburion between SRAM and DDR\ |
| - fill SRAM and some DDR, use one SRAM and one DDR header"; |
| m_minIPAHwType = IPA_HW_v5_0; |
| |
| Register(*this); |
| uint8_t aIEEE802_3Header1[22] = { 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, |
| 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0x00, 0x46, 0xAE, 0xAF, 0xB0, |
| 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6 }; |
| uint8_t aIEEE802_3Header2[22] = { 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, |
| 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0x00, 0x47, 0xAE, 0xAF, 0xB0, |
| 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6 }; |
| m_nHeadertoAddSize1 = sizeof(aIEEE802_3Header1); |
| memcpy(m_aHeadertoAdd1, aIEEE802_3Header1, m_nHeadertoAddSize1); |
| m_nHeadertoAddSize2 = sizeof(aIEEE802_3Header2); |
| memcpy(m_aHeadertoAdd2, aIEEE802_3Header2, m_nHeadertoAddSize2); |
| |
| // The packet size is 22, therefore the bin size is 24 |
| // We are going to add number of headers to occupy twice the size of the SRAM buffer |
| m_InitialHeadersNum = GetHdrSramSize() / 24 * 2; |
| } |
| |
| virtual bool AddRules() { |
| m_eIP = IPA_IP_v4; |
| const char aBypass1[20] = "Bypass1"; |
| const char aBypass2[20] = "Bypass2"; |
| uint32_t nTableHdl01, nTableHdl02; |
| bool bRetVal = true; |
| IPAFilteringTable cFilterTable0; |
| struct ipa_flt_rule_add sFilterRuleEntry; |
| struct ipa_ioc_add_hdr *pHeaderDescriptor = NULL; |
| |
| LOG_MSG_STACK("Entering Function"); |
| |
| if (m_InitialHeadersNum <= 0) |
| { |
| LOG_MSG_ERROR("Initial headers number is set to 0!\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| memset(&sFilterRuleEntry, 0, sizeof(sFilterRuleEntry)); |
| memset(&m_RetHeader1, 0, sizeof(m_RetHeader1)); |
| memset(&m_RetHeader2, 0, sizeof(m_RetHeader2)); |
| |
| pHeaderDescriptor = (struct ipa_ioc_add_hdr *) calloc(1, |
| sizeof(struct ipa_ioc_add_hdr) + 1 * sizeof(struct ipa_hdr_add)); |
| if (!pHeaderDescriptor) |
| { |
| LOG_MSG_ERROR("calloc failed to allocate ipa_ioc_add_hdr"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| |
| // Add one header to SRAM |
| pHeaderDescriptor->commit = true; |
| pHeaderDescriptor->num_hdrs = 1; |
| pHeaderDescriptor->hdr[0].status = -1; // Return Parameter |
| pHeaderDescriptor->hdr[0].hdr_hdl = -1; //Return Value |
| pHeaderDescriptor->hdr[0].is_partial = false; |
| |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd1, m_nHeadertoAddSize1); |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize1; |
| strlcpy(pHeaderDescriptor->hdr[0].name, "IEEE802_3_SRAM", sizeof(pHeaderDescriptor->hdr[0].name)); |
| strlcpy(m_RetHeader1.name, pHeaderDescriptor->hdr[0].name, sizeof(m_RetHeader1.name)); |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| // Add bunch of headers to SRAM and DDR |
| for (int i = 1; i < m_InitialHeadersNum; i++) |
| { |
| LOG_MSG_DEBUG("%s::%s iter=%d\n", typeid(this).name(), __func__, i); |
| memcpy(pHeaderDescriptor->hdr[0].hdr, m_aHeadertoAdd2, m_nHeadertoAddSize2); |
| pHeaderDescriptor->hdr[0].hdr_len = m_nHeadertoAddSize2; |
| snprintf(pHeaderDescriptor->hdr[0].name, sizeof(pHeaderDescriptor->hdr[0].name), |
| "IEEE802_3_%03d", i); |
| if (!m_HeaderInsertion.AddHeader(pHeaderDescriptor)) |
| { |
| LOG_MSG_ERROR("m_HeaderInsertion.AddHeader(pHeaderDescriptor) Failed on %d iteration.\n", i); |
| bRetVal = false; |
| goto bail; |
| } |
| } |
| strlcpy(m_RetHeader2.name, pHeaderDescriptor->hdr[0].name, sizeof(m_RetHeader2.name)); |
| |
| fflush(stderr); |
| fflush(stdout); |
| ret = system("cat /sys/kernel/debug/ipa/hdr"); |
| |
| if (!m_HeaderInsertion.GetHeaderHandle(&m_RetHeader1)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_DEBUG("Received Header1 Handle = 0x%x", m_RetHeader1.hdl); |
| |
| if (!m_HeaderInsertion.GetHeaderHandle(&m_RetHeader2)) |
| { |
| LOG_MSG_ERROR(" Failed"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_DEBUG("Received Header2 Handle = 0x%x", m_RetHeader2.hdl); |
| |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, aBypass1, IPA_CLIENT_TEST3_CONS, |
| m_RetHeader1.hdl, &nTableHdl01)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| if (!CreateBypassRoutingTable(&m_Routing, m_eIP, aBypass2, IPA_CLIENT_TEST4_CONS, |
| m_RetHeader2.hdl, &nTableHdl02)) { |
| LOG_MSG_ERROR("CreateBypassRoutingTable Failed\n"); |
| bRetVal = false; |
| goto bail; |
| } |
| LOG_MSG_INFO("Creation of two bypass routing tables completed successfully TblHdl1=0x%x, TblHdl2=0x%x", |
| nTableHdl01, nTableHdl02); |
| |
| // Creating Filtering Rules |
| cFilterTable0.Init(m_eIP, IPA_CLIENT_TEST_PROD, false, 2); |
| LOG_MSG_INFO("Creation of filtering table completed successfully"); |
| |
| // Configuring common Filtering fields |
| cFilterTable0.GeneratePresetRule(1, sFilterRuleEntry); |
| sFilterRuleEntry.at_rear = true; |
| sFilterRuleEntry.rule.action = IPA_PASS_TO_ROUTING; |
| sFilterRuleEntry.rule.attrib.attrib_mask = IPA_FLT_DST_ADDR; // Destination IP Based Filtering |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr_mask = 0xFF0000FF; // Mask |
| |
| // Configuring Filtering Rule No.1 |
| sFilterRuleEntry.flt_rule_hdl = -1; // return Value |
| sFilterRuleEntry.status = -1; // return Value |
| sFilterRuleEntry.rule.rt_tbl_hdl = nTableHdl01; //put here the handle corresponding to Routing Rule 1 |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr = 0xC0A80101; // Filter DST_IP == 192.168.1.1. |
| if ((uint8_t)-1 == cFilterTable0.AddRuleToTable(sFilterRuleEntry)) |
| { |
| LOG_MSG_ERROR ("Adding Rule(1) to Filtering table Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| // Configuring Filtering Rule No.2 |
| sFilterRuleEntry.flt_rule_hdl = -1; // return Value |
| sFilterRuleEntry.status = -1; // return value |
| sFilterRuleEntry.rule.rt_tbl_hdl = nTableHdl02; //put here the handle corresponding to Routing Rule 2 |
| sFilterRuleEntry.rule.attrib.u.v4.dst_addr = 0xC0A80102; // Filter DST_IP == 192.168.1.2. |
| if ((uint8_t)-1 == cFilterTable0.AddRuleToTable(sFilterRuleEntry)) |
| { |
| LOG_MSG_ERROR ("Adding Rule(2) to Filtering table Failed."); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| if (!m_Filtering.AddFilteringRule(cFilterTable0.GetFilteringTable())) { |
| LOG_MSG_ERROR ("Failed to commit Filtering rules"); |
| bRetVal = false; |
| goto bail; |
| } |
| |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", |
| cFilterTable0.ReadRuleFromTable(0)->flt_rule_hdl, |
| cFilterTable0.ReadRuleFromTable(0)->status); |
| LOG_MSG_DEBUG("flt rule hdl0=0x%x, status=0x%x\n", |
| cFilterTable0.ReadRuleFromTable(1)->flt_rule_hdl, |
| cFilterTable0.ReadRuleFromTable(1)->status); |
| |
| bail: |
| Free(pHeaderDescriptor); |
| LOG_MSG_STACK("Leaving Function (Returning %s)", bRetVal ? "True" : "False"); |
| return bRetVal; |
| } // AddRules() |
| |
| virtual bool ModifyPackets() { |
| // This test doesn't modify the original IP Packet. |
| return true; |
| } // ModifyPacktes () |
| |
| virtual bool TestLogic() { |
| bool bRetVal = true; |
| m_aExpectedBufSize = 0; |
| uint32_t nIPv4DSTAddr; |
| |
| LOG_MSG_STACK("Entering Function"); |
| |
| //Packet No. 1 |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| nIPv4DSTAddr = ntohl(0xC0A80101); //192.168.1.1 |
| memcpy(&m_aBuffer[IPV4_DST_ADDR_OFFSET], &nIPv4DSTAddr, sizeof(nIPv4DSTAddr)); |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd1, m_nHeadertoAddSize1); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize1,m_aBuffer,m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize1 + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer2, m_aExpectedBuffer, m_aExpectedBufSize)) |
| { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| bRetVal=false; |
| } |
| |
| //Packet No. 2 |
| memset(m_aExpectedBuffer, 0, sizeof(m_aExpectedBuffer)); |
| nIPv4DSTAddr = ntohl(0xC0A80102); //192.168.1.2 |
| memcpy (&m_aBuffer[IPV4_DST_ADDR_OFFSET], &nIPv4DSTAddr, sizeof(nIPv4DSTAddr)); |
| memcpy(m_aExpectedBuffer, m_aHeadertoAdd2, m_nHeadertoAddSize2); |
| memcpy(m_aExpectedBuffer+m_nHeadertoAddSize2, m_aBuffer, m_uBufferSize); |
| m_aExpectedBufSize = m_nHeadertoAddSize2 + m_uBufferSize; |
| if (!SendReceiveAndCompare(&m_producer, m_aBuffer, m_uBufferSize, |
| &m_Consumer3, m_aExpectedBuffer, m_aExpectedBufSize)) |
| { |
| LOG_MSG_ERROR("SendReceiveAndCompare failed."); |
| bRetVal=false; |
| } |
| |
| LOG_MSG_STACK("Leaving Function (Returning %s)",bRetVal?"True":"False"); |
| return bRetVal; |
| } |
| |
| protected: |
| struct ipa_ioc_get_hdr m_RetHeader1, m_RetHeader2; |
| int m_InitialHeadersNum; |
| |
| private: |
| uint8_t m_aExpectedBuffer[BUFF_MAX_SIZE]; // Input file / IP packet |
| size_t m_aExpectedBufSize; |
| uint8_t m_aHeadertoAdd1[MAX_HEADER_SIZE], m_aHeadertoAdd2[MAX_HEADER_SIZE]; |
| size_t m_nHeadertoAddSize1, m_nHeadertoAddSize2; |
| int ret; |
| }; |
| |
| static IPAHeaderInsertionTest001 ipaHeaderInsertionTest001; |
| static IPAHeaderInsertionTest002 ipaHeaderInsertionTest002; |
| static IPAHeaderInsertionTest003 ipaHeaderInsertionTest003; |
| static IPAHeaderInsertionTest004 ipaHeaderInsertionTest004; |
| static IPAHeaderInsertionTest005 ipaHeaderInsertionTest005; |
| static IPAHeaderInsertionTest006 ipaHeaderInsertionTest006; |
| static IPAHeaderInsertionTest007 ipaHeaderInsertionTest007; |
| static IPAHeaderInsertionTest008 ipaHeaderInsertionTest008; |
| static IPAHeaderInsertionTest009 ipaHeaderInsertionTest009; |
| static IPAHeaderInsertionTest010 ipaHeaderInsertionTest010; |
| |