| /* st_hw_common.c |
| * |
| * This file contains common functionality between |
| * sound trigger hw and sound trigger extension interface. |
| * |
| * Copyright (c) 2016, 2018-2020, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define LOG_TAG "sound_trigger_hw_common" |
| /* #define LOG_NDEBUG 0 */ |
| #define LOG_NDDEBUG 0 |
| |
| /* #define VERY_VERBOSE_LOGGING */ |
| #ifdef VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| #include <cutils/log.h> |
| #include <hardware/sound_trigger.h> |
| |
| #include "st_hw_common.h" |
| |
| /* |
| * Maximum number of sessions supported in LPI mode: |
| * here each stages are counted individually, |
| * so session count for dual stage lsm session would be set to 2. |
| */ |
| #define LSM_MAX_LPI_BUDGET_AVAILABLE 2 |
| #define LSM_MAX_SS_USECASE_SUPPORTED 1 |
| |
| #ifdef AUDIO_FEATURE_ENABLED_GCOV |
| extern void __gcov_flush(); |
| static void enable_gcov() |
| { |
| __gcov_flush(); |
| } |
| #else |
| static void enable_gcov() |
| { |
| } |
| #endif |
| |
| bool st_hw_check_ses_ss_usecase_allowed(st_session_t *st_ses) |
| { |
| struct sound_trigger_device *stdev; |
| struct listnode *node; |
| st_session_t *p_ses; |
| int lsm_ss_uc_count = 0; |
| /* TODO: get max_lsm_ss_uc_count from platform config xml */ |
| int max_lsm_ss_uc_count = LSM_MAX_SS_USECASE_SUPPORTED; |
| |
| /* |
| * Second stage is only supported on an adsp session, |
| * and when multi-stage support is available in lsm drivers. |
| */ |
| if (!st_ses || !st_ses->hw_proxy_ses || |
| !st_ses->hw_proxy_ses->hw_ses_adsp || |
| !st_hw_check_multi_stage_lsm_support()) { |
| return false; |
| } |
| |
| stdev = st_ses->stdev; |
| list_for_each(node, &stdev->sound_model_list) { |
| p_ses = node_to_item(node, st_session_t, list_node); |
| if (p_ses == NULL || p_ses == st_ses || |
| p_ses->exec_mode != ST_EXEC_MODE_ADSP) |
| continue; |
| pthread_mutex_lock(&p_ses->hw_proxy_ses->lock); |
| if (p_ses->hw_proxy_ses->hw_ses_adsp && |
| !list_empty(&p_ses->hw_proxy_ses->hw_ses_adsp->lsm_ss_cfg_list)) |
| lsm_ss_uc_count++; |
| if (lsm_ss_uc_count >= max_lsm_ss_uc_count) { |
| ALOGD("%s: max supported ss usecase count(%d) already active," |
| "not allowing further", __func__, max_lsm_ss_uc_count); |
| pthread_mutex_unlock(&p_ses->hw_proxy_ses->lock); |
| return false; |
| } |
| pthread_mutex_unlock(&p_ses->hw_proxy_ses->lock); |
| } |
| ALOGD("%s: ss usecase allowed", __func__); |
| return true; |
| } |
| |
| static int get_session_lpi_cost(st_session_t *ses) |
| { |
| /* TODO: check if this works for all sound models, and update logic if required */ |
| return ses->num_phrases > 1 ? ses->num_phrases : 1; |
| } |
| |
| /* |
| * Check below cases to do LPI budgeting: |
| * 1. when asked for a session: |
| * - check if the session can be allowed with lpi mode |
| * 2. when session is NULL: |
| * - check if sessions in global list meets lpi constraint |
| * 3. for NULL case without any other active session: |
| * - return false as lpi mode is false by default |
| */ |
| static bool is_projected_lpi_budget_available |
| ( |
| struct sound_trigger_device *stdev, |
| st_session_t *st_ses |
| ) |
| { |
| st_session_t *p_ses; |
| struct listnode *node; |
| int ses_lpi_cost = 0, sys_lpi_cost = 0; |
| /* TODO: max lpi budget from platform config xml */ |
| int max_lpi_budget_available = LSM_MAX_LPI_BUDGET_AVAILABLE; |
| |
| /* |
| * LPI mode is only allowed in following ADSP use cases: |
| * 1. Single session with single keyword and 2 stages, both in ADSP |
| * 2. Single session with two keywords but single stages in ADSP |
| * 2. Upto 2 sessions with single keyword each |
| */ |
| |
| /* first check current session for LPI criteria if st_ses is available */ |
| ses_lpi_cost = st_ses ? get_session_lpi_cost(st_ses) : 0; |
| if (ses_lpi_cost > max_lpi_budget_available) { |
| ALOGD("%s: ses lpi cost(%d) exceeds budget(%d), enable=false", |
| __func__, ses_lpi_cost, max_lpi_budget_available); |
| return false; |
| } |
| /* check for presence of any other session with remaining LPI budget*/ |
| sys_lpi_cost += ses_lpi_cost; |
| list_for_each(node, &stdev->sound_model_list) { |
| p_ses = node_to_item(node, st_session_t, list_node); |
| if (p_ses == NULL || p_ses == st_ses || p_ses->exec_mode != ST_EXEC_MODE_ADSP) |
| continue; |
| /* |
| * Check for all sessions present in sound model list as |
| * LPI is load time decision. |
| */ |
| if (p_ses->vendor_uuid_info->lpi_enable) { |
| sys_lpi_cost += get_session_lpi_cost(p_ses); |
| if (sys_lpi_cost > max_lpi_budget_available) { |
| ALOGD("%s: projected lpi cost exceeds budget(%d), enable=false", |
| __func__, max_lpi_budget_available); |
| return false; |
| } |
| } |
| } |
| |
| /* system lpi cost 0 at this point means no valid lpi session, return false */ |
| if (sys_lpi_cost == 0) { |
| ALOGV("%s: no session with lpi support, enable=false", __func__); |
| return false; |
| } |
| |
| ALOGD("%s: projected lpi cost(%d) within budget(%d), enable=true", |
| __func__, sys_lpi_cost, max_lpi_budget_available); |
| return true; |
| } |
| |
| void st_hw_check_and_update_lpi |
| ( |
| struct sound_trigger_device *stdev, |
| st_session_t *st_ses |
| ) |
| { |
| st_session_t *ses = NULL; |
| struct listnode *ses_node = NULL; |
| |
| stdev->lpi_enable = false; |
| stdev->barge_in_mode = true; |
| /* |
| * ST_PLATFORM_LPI_NONE is used for backward compatibility. With this |
| * setting, the st_vendor_uuid->lpi_enable flag will be used. |
| */ |
| if (stdev->platform_lpi_enable == ST_PLATFORM_LPI_DISABLE) { |
| ALOGD("%s: lpi NOT enabled in platform setting", __func__); |
| return; |
| } else if ((stdev->platform_lpi_enable == ST_PLATFORM_LPI_NONE) && |
| st_ses && !st_ses->vendor_uuid_info->lpi_enable) { |
| ALOGD("%s: lpi NOT enabled for ses %d", __func__, st_ses->sm_handle); |
| return; |
| } |
| |
| if (stdev->rx_concurrency_active || stdev->conc_voice_active || |
| stdev->conc_voip_active || |
| !platform_stdev_backend_reset_allowed(stdev->platform)) { |
| ALOGD("%s: lpi NOT supported due to concurrency", __func__); |
| return; |
| } |
| |
| if (stdev->is_charging && |
| stdev->transit_to_non_lpi_on_battery_charging) { |
| ALOGD("%s: lpi NOT supported. battery status %d", __func__, |
| stdev->is_charging); |
| if (stdev->support_barge_in_mode) |
| stdev->barge_in_mode = false; |
| return; |
| } |
| |
| list_for_each(ses_node, &stdev->sound_model_list) { |
| ses = node_to_item(ses_node, st_session_t, list_node); |
| |
| if (ses->client_req_det_mode == ST_DET_HIGH_PERF_MODE) { |
| ALOGD("%s:[%d] lpi NOT supported due to high perf mode", __func__, |
| ses->sm_handle); |
| if (stdev->support_barge_in_mode) |
| stdev->barge_in_mode = false; |
| return; |
| } |
| } |
| |
| if (!stdev->screen_off && stdev->support_barge_in_mode) { |
| ALOGD("%s: lpi NOT supported. Screen is on", __func__); |
| stdev->barge_in_mode = false; |
| return; |
| } |
| |
| if (stdev->platform_lpi_enable == ST_PLATFORM_LPI_NONE) |
| stdev->lpi_enable = is_projected_lpi_budget_available(stdev, st_ses); |
| else |
| stdev->lpi_enable = true; |
| stdev->barge_in_mode = !stdev->lpi_enable; |
| } |
| |
| bool st_hw_check_vad_support |
| ( |
| struct sound_trigger_device *stdev, |
| st_session_t *st_ses, |
| bool lpi_enable |
| ) |
| { |
| st_session_t *p_ses; |
| struct listnode *node; |
| bool vad_enable = false; |
| st_profile_type_t profile_type; |
| |
| |
| if (stdev->rx_concurrency_active || stdev->tx_concurrency_active) { |
| ALOGD("%s: VAD NOT supported due to concurrency", __func__); |
| return false; |
| } |
| |
| /* |
| * check for all sessions, unless vad check is requested for a particular session. |
| * For a session, return true if vad is enabled in platform config and |
| * profile type is NONE or lpi is disabled. |
| */ |
| if (st_ses) { |
| profile_type = st_ses->vendor_uuid_info->profile_type; |
| vad_enable = st_ses->vendor_uuid_info->vad_enable && |
| ((profile_type == ST_PROFILE_TYPE_NONE) || lpi_enable); |
| } else { |
| list_for_each(node, &stdev->sound_model_list) { |
| p_ses = node_to_item(node, st_session_t, list_node); |
| profile_type = p_ses->vendor_uuid_info->profile_type; |
| if (p_ses->exec_mode != ST_EXEC_MODE_ADSP) { |
| continue; |
| } else if (!p_ses->vendor_uuid_info->vad_enable || |
| ((profile_type != ST_PROFILE_TYPE_NONE) && !lpi_enable)) { |
| ALOGD("%s: disable vad, session does not meet requirement", __func__); |
| vad_enable = false; |
| break; |
| } else { |
| vad_enable = true; |
| } |
| } |
| } |
| |
| ALOGV("%s: vad_enable = %d", __func__, vad_enable); |
| return vad_enable; |
| } |
| |
| void st_hw_check_and_set_lpi_mode(st_session_t *stc_ses) |
| { |
| st_proxy_session_t *st_ses = NULL; |
| |
| if (!stc_ses || !stc_ses->hw_proxy_ses) |
| return; |
| |
| st_ses = stc_ses->hw_proxy_ses; |
| |
| pthread_mutex_lock(&st_ses->lock); |
| if (st_ses->hw_ses_adsp) { |
| if (st_ses->stdev->platform_lpi_enable == ST_PLATFORM_LPI_NONE) { |
| st_ses->hw_ses_adsp->lpi_enable = |
| (st_ses->vendor_uuid_info->lpi_enable && |
| is_projected_lpi_budget_available(st_ses->stdev, stc_ses)); |
| } else { |
| st_ses->hw_ses_adsp->lpi_enable = st_ses->stdev->lpi_enable; |
| st_ses->hw_ses_adsp->barge_in_mode = |
| st_ses->stdev->barge_in_mode; |
| } |
| } |
| pthread_mutex_unlock(&st_ses->lock); |
| } |
| |
| int stop_other_sessions(struct sound_trigger_device *stdev, |
| st_session_t *cur_ses) |
| { |
| st_session_t *p_ses; |
| struct listnode *p_ses_node; |
| int status = 0; |
| |
| ALOGV("%s: list empty %s", __func__, |
| list_empty(&stdev->sound_model_list) ? "true" : "false"); |
| |
| if (!stdev->session_allowed) |
| return 0; |
| |
| list_for_each(p_ses_node, &stdev->sound_model_list) { |
| p_ses = node_to_item(p_ses_node, st_session_t, list_node); |
| |
| /* Current session can already be in the list during SSR */ |
| if (p_ses == cur_ses) |
| continue; |
| |
| status = st_session_pause(p_ses); |
| if (status) { |
| ALOGE("%s: error stopping session", __func__); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| int start_other_sessions(struct sound_trigger_device *stdev, |
| st_session_t *cur_ses) |
| { |
| st_session_t *p_ses; |
| struct listnode *p_ses_node; |
| int status = 0; |
| |
| ALOGV("%s: list empty %s", __func__, |
| list_empty(&stdev->sound_model_list) ? "true" : "false"); |
| |
| if (!stdev->session_allowed) |
| return 0; |
| |
| list_for_each(p_ses_node, &stdev->sound_model_list) { |
| p_ses = node_to_item(p_ses_node, st_session_t, list_node); |
| |
| /* Current session can already be in the list during SSR */ |
| if (p_ses == cur_ses) |
| continue; |
| status = st_session_resume(p_ses); |
| if (status) { |
| ALOGE("%s: error restarting session", __func__); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| st_session_t* get_sound_trigger_session( |
| struct sound_trigger_device *stdev, |
| sound_model_handle_t sound_model_handle) |
| |
| { |
| st_session_t *st_session = NULL; |
| struct listnode *node; |
| |
| list_for_each(node, &stdev->sound_model_list) { |
| st_session = node_to_item(node, st_session_t, list_node); |
| if (st_session->sm_handle == sound_model_handle) |
| return st_session; |
| |
| } |
| return NULL; |
| } |
| |
| /* |
| * This function is used to prepare the detection engine custom config payload for |
| * sound trigger sessions that have second stage sessions. If history buffering is not |
| * requested by the client, add it into the payload here. Second stage sessions require |
| * the keyword to be buffered. |
| */ |
| int st_hw_ses_get_hist_buff_payload |
| ( |
| st_hw_session_t *p_ses, |
| uint8_t *payload_buf, |
| size_t buff_size |
| ) |
| { |
| struct st_hist_buffer_info *hist_buf = NULL; |
| |
| if (!payload_buf || buff_size < sizeof(*hist_buf)) { |
| ALOGE("%s: buffer size(%zd) too small to fill payload(%zd)", |
| __func__, buff_size, sizeof(*hist_buf)); |
| return -EINVAL; |
| } |
| |
| hist_buf = (struct st_hist_buffer_info *) payload_buf; |
| hist_buf->version = DEFAULT_CUSTOM_CONFIG_MINOR_VERSION; |
| hist_buf->pre_roll_duration_msec = p_ses->max_preroll; |
| |
| if (p_ses->is_generic_event && |
| p_ses->max_preroll < PREROLL_LEN_WARNING) |
| ALOGW("%s: Client requested small preroll length %dms", |
| __func__, p_ses->max_preroll); |
| |
| if (p_ses->max_hist_buf > 0) { |
| hist_buf->hist_buffer_duration_msec = |
| p_ses->max_hist_buf; |
| |
| if (p_ses->is_generic_event && |
| p_ses->max_hist_buf <= KW_LEN_WARNING) |
| ALOGW("%s: Client requested small hist buf length %dms", |
| __func__, p_ses->max_hist_buf); |
| } else { |
| hist_buf->hist_buffer_duration_msec = |
| p_ses->vendor_uuid_info->kw_duration; |
| } |
| ALOGD("%s: history buf duration %d, preroll %d", __func__, |
| hist_buf->hist_buffer_duration_msec, |
| hist_buf->pre_roll_duration_msec); |
| return 0; |
| } |
| |
| /* ---------------- hw session notify thread --------------- */ |
| #define ARRAY_SIZE(arr) (sizeof(arr)/sizeof((arr)[0])) |
| |
| typedef struct { |
| sound_model_handle_t handle; |
| st_session_event_id_t event; |
| struct listnode node; /* membership in queue or pool */ |
| uint64_t when; |
| } request_t; |
| |
| static struct { |
| pthread_t thread; |
| bool done; |
| pthread_mutex_t lock; |
| pthread_cond_t cond; |
| struct listnode queue; |
| struct listnode pool; |
| request_t requests[32]; |
| hw_session_notify_callback_t callback; |
| bool inited; |
| } hw_session_notifier; |
| |
| static inline int hw_session_notifier_lock() |
| { |
| return pthread_mutex_lock(&hw_session_notifier.lock); |
| } |
| |
| static inline int hw_session_notifier_unlock() |
| { |
| return pthread_mutex_unlock(&hw_session_notifier.lock); |
| } |
| |
| static inline int hw_session_notifier_wait_l() |
| { |
| int ret = -EINVAL; |
| |
| if (list_empty(&hw_session_notifier.queue)) { |
| pthread_cond_wait(&hw_session_notifier.cond, |
| &hw_session_notifier.lock); |
| return EINTR; /* wait can only be interrupted */ |
| } |
| |
| struct listnode *node = list_head(&hw_session_notifier.queue); |
| request_t *r = node_to_item(node, request_t, node); |
| int64_t interval = r->when - get_current_time_ns(); |
| |
| if (interval <= 0) { |
| ALOGV("early exit\n"); |
| return 0; |
| } |
| |
| struct timespec timeout; |
| GET_WAIT_TIMESPEC(timeout, interval); |
| ret = pthread_cond_timedwait(&hw_session_notifier.cond, |
| &hw_session_notifier.lock, &timeout); |
| switch (ret) { |
| case 0: |
| ret = EINTR; /* wait was interrupted */ |
| break; |
| case ETIMEDOUT: |
| ret = 0; /* time passed expired, proceed with removing first entry from list */ |
| break; |
| default: |
| ALOGE("%s: wait failed w/ ret %s\n", __func__, strerror(ret)); |
| break; |
| } |
| return ret; |
| } |
| |
| static inline int hw_session_notifier_signal() |
| { |
| return pthread_cond_signal(&hw_session_notifier.cond); |
| } |
| |
| int hw_session_notifier_enqueue(sound_model_handle_t handle, |
| st_session_event_id_t event, |
| uint64_t delay_ms) |
| { |
| int ret = 0; |
| |
| if (!hw_session_notifier.inited) |
| return -ENODEV; |
| |
| hw_session_notifier_lock(); |
| if (list_empty(&hw_session_notifier.pool)) { |
| ALOGE("%s: No space to queue request, try again", __func__); |
| ret = -EAGAIN; |
| goto exit; |
| } |
| |
| struct listnode *req_node = list_head(&hw_session_notifier.pool); |
| list_remove(req_node); |
| request_t *r = node_to_item(req_node, request_t, node); |
| r->handle = handle; |
| r->event = event; |
| r->when = get_current_time_ns() + (delay_ms * NSECS_PER_MSEC); |
| |
| struct listnode *node = list_head(&hw_session_notifier.queue); |
| while (node != list_tail(&hw_session_notifier.queue)) { |
| request_t *er = node_to_item(node, request_t, node); |
| if (r->when >= er->when) { |
| /* continue to next node */ |
| node = list_head(node); |
| } else { |
| /* insert the element before this node */ |
| break; |
| } |
| } |
| /* |
| * queue element before element "node". This is implicitly same |
| * as list->push_back if the element has to be pushed to the |
| * end of the list as in that case, node == head |
| */ |
| list_add_tail(node, req_node); |
| hw_session_notifier_signal(); |
| exit: |
| hw_session_notifier_unlock(); |
| return ret; |
| } |
| |
| int hw_session_notifier_cancel(sound_model_handle_t handle, |
| st_session_event_id_t event) { |
| int ret = -1; |
| struct listnode *node, *tmp_node; |
| |
| if (!hw_session_notifier.inited) |
| return -1; |
| |
| hw_session_notifier_lock(); |
| list_for_each_safe(node, tmp_node, &hw_session_notifier.queue) { |
| request_t *r = node_to_item(node, request_t, node); |
| if (r->handle == handle && r->event == event) { |
| ALOGV("%s: found req with handle %d and ev %d to cancel", |
| __func__, handle, event); |
| r->handle = -1; |
| list_remove(node); |
| list_add_tail(&hw_session_notifier.pool, node); |
| ret = 0; |
| } |
| } |
| hw_session_notifier_signal(); |
| hw_session_notifier_unlock(); |
| return ret; |
| } |
| |
| static void hw_session_notify_process_once_l() { |
| struct listnode *req_node = list_head(&hw_session_notifier.queue); |
| request_t *r = node_to_item(req_node, request_t, node); |
| |
| list_remove(req_node); |
| hw_session_notifier_unlock(); |
| switch (r->event) { |
| case ST_SES_EV_DEFERRED_STOP: |
| ALOGI("%s:[%d] hw notify deferred stop", __func__, r->handle); |
| hw_session_notifier.callback(r->handle, ST_SES_EV_DEFERRED_STOP); |
| break; |
| default: |
| break; |
| } |
| hw_session_notifier_lock(); |
| list_add_tail(&hw_session_notifier.pool, req_node); |
| } |
| |
| void *hw_session_notifier_loop(void *arg __unused) { |
| hw_session_notifier_lock(); |
| while (!hw_session_notifier.done) { |
| int ret = hw_session_notifier_wait_l(); |
| switch (ret) { |
| case 0: /* timer expired */ |
| hw_session_notify_process_once_l(); |
| break; |
| case EINTR: /* timer interrupted due to next enqueue or some other event */ |
| continue; |
| default: |
| ALOGE("%s: wait_l returned err %d, exit loop!", __func__, ret); |
| hw_session_notifier.done = true; |
| break; |
| } |
| } |
| hw_session_notifier_unlock(); |
| ALOGI("%s thread loop exiting", __func__); |
| return NULL; |
| } |
| |
| int hw_session_notifier_init(hw_session_notify_callback_t cb) { |
| pthread_attr_t attr; |
| pthread_condattr_t c_attr; |
| |
| if (hw_session_notifier.inited) |
| return -EINVAL; |
| |
| hw_session_notifier.inited = false; |
| hw_session_notifier.done = false; |
| |
| pthread_mutex_init(&hw_session_notifier.lock, NULL); |
| pthread_condattr_init(&c_attr); |
| pthread_condattr_setclock(&c_attr, CLOCK_MONOTONIC); |
| pthread_cond_init(&hw_session_notifier.cond, &c_attr); |
| pthread_condattr_destroy(&c_attr); |
| |
| list_init(&hw_session_notifier.queue); |
| list_init(&hw_session_notifier.pool); |
| for (uint32_t i = 0; i < ARRAY_SIZE(hw_session_notifier.requests); i++) { |
| list_init(&hw_session_notifier.requests[i].node); |
| hw_session_notifier.requests[i].handle = -1; |
| list_add_tail(&hw_session_notifier.pool, |
| &hw_session_notifier.requests[i].node); |
| } |
| pthread_attr_init(&attr); |
| if (pthread_create(&hw_session_notifier.thread, &attr, |
| hw_session_notifier_loop, NULL)) { |
| ALOGE("%s: Failed to create hw_notify thread w/ err %s", |
| __func__, |
| strerror(errno)); |
| return -1; |
| } |
| hw_session_notifier.callback = cb; |
| hw_session_notifier.inited = true; |
| ALOGV("%s: completed", __func__); |
| enable_gcov(); |
| return 0; |
| } |
| |
| void hw_session_notifier_deinit() |
| { |
| if (hw_session_notifier.inited) { |
| hw_session_notifier_lock(); |
| hw_session_notifier.done = true; |
| hw_session_notifier_signal(); |
| hw_session_notifier_unlock(); |
| pthread_join(hw_session_notifier.thread, NULL); |
| hw_session_notifier.inited = false; |
| pthread_mutex_destroy(&hw_session_notifier.lock); |
| pthread_cond_destroy(&(hw_session_notifier.cond)); |
| ALOGV("%s: completed", __func__); |
| } |
| enable_gcov(); |
| } |