| /* |
| * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| * SPDX-License-Identifier: BSD-3-Clause-Clear |
| */ |
| |
| #define LOG_TAG "PAL: StreamPCM" |
| |
| #include "StreamPCM.h" |
| #include "Session.h" |
| #include "kvh2xml.h" |
| #include "SessionAlsaPcm.h" |
| #include "ResourceManager.h" |
| #include "Device.h" |
| #include <unistd.h> |
| #include <chrono> |
| |
| StreamPCM::StreamPCM(const struct pal_stream_attributes *sattr, struct pal_device *dattr, |
| const uint32_t no_of_devices, const struct modifier_kv *modifiers, |
| const uint32_t no_of_modifiers, const std::shared_ptr<ResourceManager> rm) |
| { |
| mStreamMutex.lock(); |
| uint32_t in_channels = 0, out_channels = 0; |
| uint32_t attribute_size = 0; |
| |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, can not create stream"); |
| usleep(SSR_RECOVERY); |
| mStreamMutex.unlock(); |
| throw std::runtime_error("Sound card offline"); |
| } |
| |
| session = NULL; |
| mGainLevel = -1; |
| std::shared_ptr<Device> dev = nullptr; |
| mStreamAttr = (struct pal_stream_attributes *)nullptr; |
| mDevices.clear(); |
| currentState = STREAM_IDLE; |
| //Modify cached values only at time of SSR down. |
| cachedState = STREAM_IDLE; |
| bool isDeviceConfigUpdated = false; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| //TBD handle modifiers later |
| mNoOfModifiers = 0; //no_of_modifiers; |
| mModifiers = (struct modifier_kv *) (NULL); |
| std::ignore = modifiers; |
| std::ignore = no_of_modifiers; |
| |
| // Setting default volume to unity |
| mVolumeData = (struct pal_volume_data *)malloc(sizeof(struct pal_volume_data) |
| +sizeof(struct pal_channel_vol_kv)); |
| if (!mVolumeData) { |
| PAL_ERR(LOG_TAG, "Failed to allocate memory for volume data"); |
| mStreamMutex.unlock(); |
| throw std::runtime_error("failed to allocate memory for volume data"); |
| } |
| mVolumeData->no_of_volpair = 1; |
| mVolumeData->volume_pair[0].channel_mask = 0x03; |
| mVolumeData->volume_pair[0].vol = 1.0f; |
| volRampPeriodms = 0x28; |
| |
| if (!sattr || !dattr) { |
| PAL_ERR(LOG_TAG,"invalid arguments"); |
| mStreamMutex.unlock(); |
| throw std::runtime_error("invalid arguments"); |
| } |
| |
| attribute_size = sizeof(struct pal_stream_attributes); |
| mStreamAttr = (struct pal_stream_attributes *) calloc(1, attribute_size); |
| if (!mStreamAttr) { |
| PAL_ERR(LOG_TAG, "malloc for stream attributes failed %s", strerror(errno)); |
| mStreamMutex.unlock(); |
| throw std::runtime_error("failed to malloc for stream attributes"); |
| } |
| |
| ar_mem_cpy(mStreamAttr, sizeof(pal_stream_attributes), sattr, sizeof(pal_stream_attributes)); |
| |
| if (mStreamAttr->in_media_config.ch_info.channels > PAL_MAX_CHANNELS_SUPPORTED) { |
| PAL_ERR(LOG_TAG,"in_channels is invalid %d", in_channels); |
| mStreamAttr->in_media_config.ch_info.channels = PAL_MAX_CHANNELS_SUPPORTED; |
| } |
| if (mStreamAttr->out_media_config.ch_info.channels > PAL_MAX_CHANNELS_SUPPORTED) { |
| PAL_ERR(LOG_TAG,"out_channels is invalid %d", out_channels); |
| mStreamAttr->out_media_config.ch_info.channels = PAL_MAX_CHANNELS_SUPPORTED; |
| } |
| |
| PAL_VERBOSE(LOG_TAG, "Create new Session"); |
| session = Session::makeSession(rm, sattr); |
| if (!session) { |
| PAL_ERR(LOG_TAG, "session creation failed"); |
| free(mStreamAttr); |
| mStreamMutex.unlock(); |
| throw std::runtime_error("failed to create session object"); |
| } |
| |
| PAL_VERBOSE(LOG_TAG, "Create new Devices with no_of_devices - %d", no_of_devices); |
| for (int i = 0; i < no_of_devices; i++) { |
| //Check with RM if the configuration given can work or not |
| //for e.g., if incoming stream needs 24 bit device thats also |
| //being used by another stream, then the other stream should route |
| |
| dev = Device::getInstance((struct pal_device *)&dattr[i] , rm); |
| if (!dev) { |
| PAL_ERR(LOG_TAG, "Device creation failed"); |
| free(mStreamAttr); |
| |
| //TBD::free session too |
| mStreamMutex.unlock(); |
| throw std::runtime_error("failed to create device object"); |
| } |
| dev->insertStreamDeviceAttr(&dattr[i], this); |
| mPalDevices.push_back(dev); |
| mStreamMutex.unlock(); |
| isDeviceConfigUpdated = rm->updateDeviceConfig(&dev, &dattr[i], sattr); |
| mStreamMutex.lock(); |
| |
| if (isDeviceConfigUpdated) |
| PAL_VERBOSE(LOG_TAG, "Device config updated"); |
| |
| /* Create only update device attributes first time so update here using set*/ |
| /* this will have issues if same device is being currently used by different stream */ |
| // dev->setDeviceAttributes((struct pal_device)dattr[i]); |
| mDevices.push_back(dev); |
| dev = nullptr; |
| } |
| |
| |
| // Register for Soft pause events |
| if (mStreamAttr->direction == PAL_AUDIO_OUTPUT ) |
| session->registerCallBack(handleSoftPauseCallBack, (uint64_t)this); |
| |
| mStreamMutex.unlock(); |
| /* Stream mutex is unlocked before calling stream specific API |
| * in resource manager to avoid deadlock issues between stream |
| * and active stream mutex from ResourceManager. |
| */ |
| rm->registerStream(this); |
| PAL_DBG(LOG_TAG, "Exit. state %d", currentState); |
| return; |
| } |
| |
| int32_t StreamPCM::open() |
| { |
| int32_t status = 0; |
| int32_t ret = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK device count - %zu", session, |
| mDevices.size()); |
| |
| mStreamMutex.lock(); |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, can not open stream"); |
| usleep(SSR_RECOVERY); |
| status = -EIO; |
| goto exit; |
| } |
| |
| /* Check for BT device connected state */ |
| for (int32_t i = 0; i < mDevices.size(); i++) { |
| pal_device_id_t dev_id = (pal_device_id_t) mDevices[i]->getSndDeviceId(); |
| if (rm->isBtDevice(dev_id) && !(rm->isDeviceAvailable(dev_id))) { |
| PAL_ERR(LOG_TAG, "BT device %d not connected, cannot open stream", dev_id); |
| status = -ENODEV; |
| goto exit; |
| } |
| } |
| |
| if (currentState == STREAM_IDLE) { |
| bool checkDeviceCustomKeyForDualMono = false; |
| bool setEffectParametersForDualMono = false; |
| // enable dual mono |
| if (rm->isDualMonoEnabled == true) { |
| PAL_INFO(LOG_TAG, "Dual mono feature is on"); |
| if (mStreamAttr->type == PAL_STREAM_LOW_LATENCY) { |
| PAL_INFO(LOG_TAG, "stream type is low-latency"); |
| checkDeviceCustomKeyForDualMono = true; |
| } |
| } |
| |
| for (int32_t i = 0; i < mDevices.size(); i++) { |
| status = mDevices[i]->open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "device open failed with status %d", status); |
| goto exit; |
| } |
| |
| if (checkDeviceCustomKeyForDualMono) { |
| struct pal_device deviceAttribute; |
| ret = mDevices[i]->getDeviceAttributes(&deviceAttribute, this); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "getDeviceAttributes failed with status %d", ret); |
| } |
| PAL_INFO(LOG_TAG, "device custom key=%s", |
| deviceAttribute.custom_config.custom_key); |
| if (deviceAttribute.id == PAL_DEVICE_OUT_SPEAKER && |
| !strncmp(deviceAttribute.custom_config.custom_key, |
| "speaker-safe", sizeof("speaker-safe"))) { |
| setEffectParametersForDualMono = true; |
| } |
| } |
| } |
| |
| rm->lockGraph(); |
| status = session->open(this); |
| rm->unlockGraph(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session open failed with status %d", status); |
| goto exit; |
| } |
| PAL_VERBOSE(LOG_TAG, "session open successful"); |
| |
| if (setEffectParametersForDualMono) { |
| uint8_t* paramData = NULL; |
| ret = PayloadBuilder::payloadDualMono(¶mData); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "failed to create dual mono info"); |
| } else { |
| pal_param_payload *pal_param = (pal_param_payload *)paramData; |
| effect_pal_payload_t *effectPayload = (effect_pal_payload_t *)pal_param->payload; |
| ret = session->setEffectParameters(this, effectPayload); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "failed to set dual mono param."); |
| } else { |
| PAL_INFO(LOG_TAG, "dual mono setparameter succeeded."); |
| } |
| free(paramData); |
| } |
| } |
| currentState = STREAM_INIT; |
| PAL_DBG(LOG_TAG, "stream pcm opened. state %d", currentState); |
| } else if (currentState == STREAM_INIT) { |
| PAL_INFO(LOG_TAG, "Stream is already opened, state %d", currentState); |
| status = 0; |
| goto exit; |
| } else { |
| PAL_ERR(LOG_TAG, "Stream is not in correct state %d", currentState); |
| //TBD : which error code to return here. |
| status = -EINVAL; |
| goto exit; |
| } |
| exit: |
| mStreamMutex.unlock(); |
| PAL_DBG(LOG_TAG, "Exit ret %d", status) |
| return status; |
| } |
| |
| //TBD: move this to Stream, why duplicate code? |
| int32_t StreamPCM::close() |
| { |
| int32_t status = 0; |
| mStreamMutex.lock(); |
| |
| if (currentState == STREAM_IDLE) { |
| PAL_INFO(LOG_TAG, "Stream is already closed"); |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK device count - %zu state %d", |
| session, mDevices.size(), currentState); |
| |
| if (currentState == STREAM_STARTED || currentState == STREAM_PAUSED) { |
| mStreamMutex.unlock(); |
| status = stop(); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "stream stop failed. status %d", status); |
| mStreamMutex.lock(); |
| } else if (currentState == STREAM_INIT || currentState == STREAM_STOPPED) { |
| /* Special handling for aaudio usecase on A2DP/BLE/Speaker. |
| * A2DP/BLE device starts even when stream is still in STREAM_INIT state, |
| * hence stop A2DP/BLE/Speaker device to match device start&stop count. |
| */ |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| if (((mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_A2DP) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_BLE) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_SPEAKER)) && isMMap) { |
| status = mDevices[i]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "BT A2DP/BLE device stop failed with status %d", status); |
| } |
| } |
| } |
| } |
| |
| rm->lockGraph(); |
| status = session->close(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session close failed with status %d", status); |
| } |
| |
| for (int32_t i = 0; i < mDevices.size(); i++) { |
| status = mDevices[i]->close(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "device close is failed with status %d", status); |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "closed the devices successfully"); |
| currentState = STREAM_IDLE; |
| rm->unlockGraph(); |
| rm->checkAndSetDutyCycleParam(); |
| mStreamMutex.unlock(); |
| |
| PAL_DBG(LOG_TAG, "Exit. closed the stream successfully %d status %d", |
| currentState, status); |
| return status; |
| } |
| |
| StreamPCM::~StreamPCM() |
| { |
| cachedState = STREAM_IDLE; |
| |
| rm->resetStreamInstanceID(this); |
| /* Stream mutex is not taken before calling stream specific API |
| * in resource manager to avoid deadlock issues between stream |
| * and active stream mutex from ResourceManager. |
| */ |
| rm->deregisterStream(this); |
| /* remove the device-stream attribute entry for the stopped stream */ |
| for (int32_t i=0; i < mPalDevices.size(); i++) |
| mPalDevices[i]->removeStreamDeviceAttr(this); |
| if (mStreamAttr) { |
| free(mStreamAttr); |
| mStreamAttr = (struct pal_stream_attributes *)NULL; |
| } |
| |
| if(mVolumeData) { |
| free(mVolumeData); |
| mVolumeData = (struct pal_volume_data *)NULL; |
| } |
| |
| /*switch back to proper config if there is a concurrency and device is still running*/ |
| for (int32_t i=0; i < mDevices.size(); i++) |
| rm->restoreDevice(mDevices[i]); |
| |
| mDevices.clear(); |
| mPalDevices.clear(); |
| delete session; |
| session = nullptr; |
| } |
| |
| //TBD: move this to Stream, why duplicate code? |
| int32_t StreamPCM::start() |
| { |
| int32_t status = 0, devStatus = 0, cachedStatus = 0; |
| int32_t tmp = 0; |
| bool a2dpSuspend = false; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK mStreamAttr->direction - %d state %d", |
| session, mStreamAttr->direction, currentState); |
| |
| mStreamMutex.lock(); |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| cachedState = STREAM_STARTED; |
| PAL_ERR(LOG_TAG, "Sound card offline. Update the cached state %d", |
| cachedState); |
| goto exit; |
| } |
| |
| if (currentState == STREAM_INIT || currentState == STREAM_STOPPED) { |
| switch (mStreamAttr->direction) { |
| case PAL_AUDIO_OUTPUT: |
| PAL_VERBOSE(LOG_TAG, "Inside PAL_AUDIO_OUTPUT device count - %zu", |
| mDevices.size()); |
| |
| // handle scenario where BT device is not ready |
| status = handleBTDeviceNotReady(a2dpSuspend); |
| if (0 != status) |
| goto exit; |
| |
| rm->lockGraph(); |
| /* Any device start success will be treated as positive status. |
| * This allows stream be played even if one of devices failed to start. |
| */ |
| status = -EINVAL; |
| if (!mDevices.size()) { |
| PAL_ERR(LOG_TAG, "No Rx device available to start the usecase"); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| if (((mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_A2DP) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_BLE) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_SPEAKER)) && isMMap) { |
| PAL_DBG(LOG_TAG, "skip BT A2DP/BLE/Speaker device start as it's done already"); |
| status = 0; |
| continue; |
| } |
| |
| devStatus = mDevices[i]->start(); |
| if (devStatus == 0) { |
| status = 0; |
| } else { |
| cachedStatus = devStatus; |
| |
| tmp = session->disconnectSessionDevice(this, mStreamAttr->type, mDevices[i]); |
| if (0 != tmp) { |
| PAL_ERR(LOG_TAG, "disconnectSessionDevice failed:%d", tmp); |
| } |
| |
| tmp = mDevices[i]->close(); |
| if (0 != tmp) { |
| PAL_ERR(LOG_TAG, "device close failed with status %d", tmp); |
| } |
| mDevices.erase(mDevices.begin() + i); |
| i--; |
| } |
| } |
| if (0 != status) { |
| status = cachedStatus; |
| PAL_ERR(LOG_TAG, "Rx device start failed with status %d", status); |
| rm->unlockGraph(); |
| goto exit; |
| } else { |
| PAL_VERBOSE(LOG_TAG, "devices started successfully"); |
| } |
| |
| status = session->prepare(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx session prepare is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| PAL_VERBOSE(LOG_TAG, "session prepare successful"); |
| |
| status = session->start(this); |
| if (errno == -ENETRESET) { |
| if (rm->cardState != CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, informing RM"); |
| rm->ssrHandler(CARD_STATUS_OFFLINE); |
| } |
| cachedState = STREAM_STARTED; |
| /* Returning status 0, hal shouldn't be |
| * informed of failure because we have cached |
| * the state and will start from STARTED state |
| * during SSR up Handling. |
| */ |
| status = 0; |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx session start is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| PAL_VERBOSE(LOG_TAG, "session start successful"); |
| rm->unlockGraph(); |
| |
| if (a2dpSuspend) { |
| PAL_DBG(LOG_TAG, "mute the stream on speaker"); |
| if (!a2dpMuted) { |
| mute_l(true); |
| a2dpMuted = true; |
| } |
| } |
| break; |
| |
| case PAL_AUDIO_INPUT: |
| PAL_VERBOSE(LOG_TAG, "Inside PAL_AUDIO_INPUT device count - %zu", |
| mDevices.size()); |
| |
| rm->lockGraph(); |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| status = mDevices[i]->start(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx device start is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "devices started successfully"); |
| status = session->prepare(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx session prepare is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| PAL_VERBOSE(LOG_TAG, "session prepare successful"); |
| |
| status = session->start(this); |
| if (errno == -ENETRESET) { |
| if (rm->cardState != CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, informing RM"); |
| rm->ssrHandler(CARD_STATUS_OFFLINE); |
| } |
| status = 0; |
| cachedState = STREAM_STARTED; |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx session start is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| rm->unlockGraph(); |
| PAL_VERBOSE(LOG_TAG, "session start successful"); |
| break; |
| case PAL_AUDIO_OUTPUT | PAL_AUDIO_INPUT: |
| PAL_VERBOSE(LOG_TAG, "Inside Loopback case device count - %zu", |
| mDevices.size()); |
| rm->lockGraph(); |
| // start output device |
| for (int32_t i=0; i < mDevices.size(); i++) |
| { |
| int32_t dev_id = mDevices[i]->getSndDeviceId(); |
| if (dev_id <= PAL_DEVICE_OUT_MIN || dev_id >= PAL_DEVICE_OUT_MAX) |
| continue; |
| status = mDevices[i]->start(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx device start is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "output devices started successfully"); |
| // start input device |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| int32_t dev_id = mDevices[i]->getSndDeviceId(); |
| if (dev_id <= PAL_DEVICE_IN_MIN || dev_id >= PAL_DEVICE_IN_MAX) |
| continue; |
| status = mDevices[i]->start(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx device start is failed with status %d", status); |
| |
| /* In case of a voice call, if OUT dev started successfully |
| * but IN dev failed to start then stop OUT dev before closing it |
| */ |
| for (int32_t i = 0; i < mDevices.size(); i++) { |
| int32_t dev_id = mDevices[i]->getSndDeviceId(); |
| |
| if (dev_id <= PAL_DEVICE_OUT_MIN || dev_id >= PAL_DEVICE_OUT_MAX) |
| continue; |
| |
| int32_t tempStatus = mDevices[i]->stop(); |
| if (0 != tempStatus) { |
| PAL_ERR(LOG_TAG, "Rx device stop is failed with status %d", |
| tempStatus); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| |
| } |
| PAL_VERBOSE(LOG_TAG, "RX devices stop successful"); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "input devices started successfully"); |
| |
| status = session->prepare(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session prepare is failed with status %d", status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| PAL_VERBOSE(LOG_TAG, "session prepare successful"); |
| |
| status = session->start(this); |
| if (errno == -ENETRESET) { |
| if (rm->cardState != CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, informing RM"); |
| rm->ssrHandler(CARD_STATUS_OFFLINE); |
| } |
| status = 0; |
| cachedState = STREAM_STARTED; |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session start is failed with status %d", status); |
| rm->unlockGraph(); |
| goto session_fail; |
| } |
| rm->unlockGraph(); |
| PAL_VERBOSE(LOG_TAG, "session start successful"); |
| break; |
| default: |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "Stream type is not supported, status %d", status); |
| break; |
| } |
| /*pcm_open and pcm_start done at once here, |
| *so directly jump to STREAM_STARTED state. |
| */ |
| currentState = STREAM_STARTED; |
| mStreamMutex.unlock(); |
| rm->lockActiveStream(); |
| mStreamMutex.lock(); |
| for (int i = 0; i < mDevices.size(); i++) { |
| rm->registerDevice(mDevices[i], this); |
| } |
| rm->unlockActiveStream(); |
| rm->checkAndSetDutyCycleParam(); |
| } else if (currentState == STREAM_STARTED) { |
| PAL_INFO(LOG_TAG, "Stream already started, state %d", currentState); |
| goto exit; |
| } else { |
| PAL_ERR(LOG_TAG, "Stream is not opened yet"); |
| status = -EINVAL; |
| goto exit; |
| } |
| goto exit; |
| session_fail: |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| devStatus = mDevices[i]->stop(); |
| if (devStatus) |
| status = devStatus; |
| } |
| exit: |
| PAL_DBG(LOG_TAG, "Exit. state %d, status %d", currentState, status); |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| //TBD: move this to Stream, why duplicate code? |
| int32_t StreamPCM::stop() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK mStreamAttr->direction - %d state %d", |
| session, mStreamAttr->direction, currentState); |
| |
| if (currentState == STREAM_STARTED || currentState == STREAM_PAUSED) { |
| mStreamMutex.unlock(); |
| rm->lockActiveStream(); |
| mStreamMutex.lock(); |
| currentState = STREAM_STOPPED; |
| for (int i = 0; i < mDevices.size(); i++) { |
| rm->deregisterDevice(mDevices[i], this); |
| } |
| rm->unlockActiveStream(); |
| switch (mStreamAttr->direction) { |
| case PAL_AUDIO_OUTPUT: |
| PAL_VERBOSE(LOG_TAG, "In PAL_AUDIO_OUTPUT case, device count - %zu", |
| mDevices.size()); |
| |
| rm->lockGraph(); |
| status = session->stop(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx session stop failed with status %d", status); |
| } |
| PAL_VERBOSE(LOG_TAG, "session stop successful"); |
| |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| if (((mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_A2DP) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_BLE) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_SPEAKER)) && isMMap) { |
| PAL_DBG(LOG_TAG, "skip BT A2DP/BLE/Speaker device stop, to be done in close/disconnect"); |
| status = 0; |
| continue; |
| } |
| status = mDevices[i]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx device stop failed with status %d", status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| rm->unlockGraph(); |
| PAL_VERBOSE(LOG_TAG, "devices stop successful"); |
| break; |
| |
| case PAL_AUDIO_INPUT: |
| PAL_ERR(LOG_TAG, "In PAL_AUDIO_INPUT case, device count - %zu", |
| mDevices.size()); |
| |
| rm->lockGraph(); |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| status = mDevices[i]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx device stop failed with status %d", status); |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "devices stop successful"); |
| |
| status = session->stop(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx session stop failed with status %d", status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| rm->unlockGraph(); |
| PAL_VERBOSE(LOG_TAG, "session stop successful"); |
| break; |
| |
| case PAL_AUDIO_OUTPUT | PAL_AUDIO_INPUT: |
| PAL_VERBOSE(LOG_TAG, "In LOOPBACK case, device count - %zu", mDevices.size()); |
| |
| rm->lockGraph(); |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| int32_t dev_id = mDevices[i]->getSndDeviceId(); |
| if (dev_id <= PAL_DEVICE_IN_MIN || dev_id >= PAL_DEVICE_IN_MAX) |
| continue; |
| status = mDevices[i]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Tx device stop is failed with status %d", |
| status); |
| } |
| } |
| PAL_VERBOSE(LOG_TAG, "TX devices stop successful"); |
| status = session->stop(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session stop is failed with status %d", status); |
| } |
| PAL_VERBOSE(LOG_TAG, "session stop successful"); |
| |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| int32_t dev_id = mDevices[i]->getSndDeviceId(); |
| if (dev_id <= PAL_DEVICE_OUT_MIN || dev_id >= PAL_DEVICE_OUT_MAX) |
| continue; |
| status = mDevices[i]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Rx device stop is failed with status %d", |
| status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| rm->unlockGraph(); |
| PAL_VERBOSE(LOG_TAG, "RX devices stop successful"); |
| break; |
| default: |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "Stream type is not supported with status %d", status); |
| break; |
| } |
| } else if (currentState == STREAM_STOPPED || currentState == STREAM_IDLE) { |
| PAL_INFO(LOG_TAG, "Stream is already in Stopped state %d", currentState); |
| goto exit; |
| } else { |
| PAL_ERR(LOG_TAG, "Stream should be in start/pause state, %d", currentState); |
| status = -EINVAL; |
| goto exit; |
| } |
| |
| exit: |
| PAL_DBG(LOG_TAG, "Exit. status %d, state %d", status, currentState); |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| //TBD: move this to Stream, why duplicate code? |
| int32_t StreamPCM::prepare() |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| |
| mStreamMutex.lock(); |
| status = session->prepare(this); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "session prepare failed with status = %d", status); |
| mStreamMutex.unlock(); |
| PAL_DBG(LOG_TAG, "Exit. status - %d", status); |
| |
| return status; |
| } |
| |
| //TBD: move this to Stream, why duplicate code? |
| int32_t StreamPCM::setStreamAttributes(struct pal_stream_attributes *sattr) |
| { |
| int32_t status = -EINVAL; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| |
| if (!sattr) |
| { |
| PAL_ERR(LOG_TAG, "NULL stream attributes sent"); |
| goto exit; |
| } |
| memset(mStreamAttr, 0, sizeof(struct pal_stream_attributes)); |
| mStreamMutex.lock(); |
| ar_mem_cpy (mStreamAttr, sizeof(struct pal_stream_attributes), sattr, |
| sizeof(struct pal_stream_attributes)); |
| mStreamMutex.unlock(); |
| status = session->setConfig(this, MODULE, 0); //TODO:gkv or ckv or tkv need to pass |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setConfig failed with status %d", status); |
| goto exit; |
| } |
| |
| PAL_DBG(LOG_TAG, "session setConfig successful"); |
| exit: |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::setVolume(struct pal_volume_data *volume) |
| { |
| int32_t status = 0; |
| struct volume_set_param_info vol_set_param_info; |
| uint8_t volSize = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| if (!volume || (volume->no_of_volpair == 0)) { |
| PAL_ERR(LOG_TAG, "Invalid arguments"); |
| status = -EINVAL; |
| goto exit; |
| } |
| |
| // if already allocated free and reallocate |
| if (mVolumeData) { |
| free(mVolumeData); |
| mVolumeData = NULL; |
| } |
| |
| volSize = sizeof(uint32_t) + (sizeof(struct pal_channel_vol_kv) * (volume->no_of_volpair)); |
| mVolumeData = (struct pal_volume_data *)calloc(1, volSize); |
| if (!mVolumeData) { |
| status = -ENOMEM; |
| PAL_ERR(LOG_TAG, "failed to calloc for volume data"); |
| goto exit; |
| } |
| |
| /* Allow caching of stream volume as part of mVolumeData |
| * till the stream_start is not done or if sound card is offline. |
| */ |
| ar_mem_cpy(mVolumeData, volSize, volume, volSize); |
| for (int32_t i=0; i < (mVolumeData->no_of_volpair); i++) { |
| PAL_INFO(LOG_TAG, "Volume payload mask:%x vol:%f", |
| (mVolumeData->volume_pair[i].channel_mask), (mVolumeData->volume_pair[i].vol)); |
| } |
| |
| if (a2dpMuted) { |
| PAL_DBG(LOG_TAG, "a2dp muted, just cache volume update"); |
| goto exit; |
| } |
| |
| memset(&vol_set_param_info, 0, sizeof(struct volume_set_param_info)); |
| rm->getVolumeSetParamInfo(&vol_set_param_info); |
| if ((rm->cardState == CARD_STATUS_ONLINE) && (currentState != STREAM_IDLE) |
| && (currentState != STREAM_INIT) && (!isPaused)) { |
| bool isStreamAvail = (find(vol_set_param_info.streams_.begin(), |
| vol_set_param_info.streams_.end(), mStreamAttr->type) != |
| vol_set_param_info.streams_.end()); |
| if (isStreamAvail && vol_set_param_info.isVolumeUsingSetParam) { |
| uint8_t *volPayload = new uint8_t[sizeof(pal_param_payload) + volSize](); |
| pal_param_payload *pld = (pal_param_payload *)volPayload; |
| pld->payload_size = sizeof(struct pal_volume_data); |
| memcpy(pld->payload, mVolumeData, volSize); |
| status = session->setParameters(this, TAG_STREAM_VOLUME, |
| PAL_PARAM_ID_VOLUME_USING_SET_PARAM, (void *)pld); |
| delete[] volPayload; |
| } else { |
| status = session->setConfig(this, CALIBRATION, TAG_STREAM_VOLUME); |
| } |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setConfig for VOLUME_TAG failed with status %d", |
| status); |
| goto exit; |
| } |
| } |
| |
| exit: |
| if (volume) { |
| PAL_DBG(LOG_TAG, "Exit. Volume payload No.of vol pair:%d ch mask:%x gain:%f", |
| (volume->no_of_volpair), (volume->volume_pair->channel_mask), |
| (volume->volume_pair->vol)); |
| } |
| return status; |
| } |
| |
| int32_t StreamPCM::read(struct pal_buffer* buf) |
| { |
| int32_t status = 0; |
| int32_t size; |
| PAL_VERBOSE(LOG_TAG, "Enter. session handle - %pK, state %d", |
| session, currentState); |
| |
| mStreamMutex.lock(); |
| if ((rm->cardState == CARD_STATUS_OFFLINE) || cachedState != STREAM_IDLE) { |
| /* calculate sleep time based on buf->size, sleep and return buf->size */ |
| uint32_t streamSize; |
| uint32_t byteWidth = mStreamAttr->in_media_config.bit_width / 8; |
| uint32_t sampleRate = mStreamAttr->in_media_config.sample_rate; |
| struct pal_channel_info chInfo = mStreamAttr->in_media_config.ch_info; |
| |
| streamSize = byteWidth * chInfo.channels; |
| if ((streamSize == 0) || (sampleRate == 0)) { |
| PAL_ERR(LOG_TAG, "stream_size= %d, srate = %d", |
| streamSize, sampleRate); |
| status = -EINVAL; |
| goto exit; |
| } |
| size = buf->size; |
| memset(buf->buffer, 0, size); |
| usleep((uint64_t)size * 1000000 / streamSize / sampleRate); |
| PAL_DBG(LOG_TAG, "Sound card offline, dropped buffer size - %d", size); |
| status = size; |
| goto exit; |
| } |
| |
| if (currentState == STREAM_STARTED) { |
| status = session->read(this, SHMEM_ENDPOINT, buf, &size); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session read is failed with status %d", status); |
| if (errno == -ENETRESET && |
| rm->cardState != CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, informing RM"); |
| rm->ssrHandler(CARD_STATUS_OFFLINE); |
| size = buf->size; |
| status = size; |
| PAL_DBG(LOG_TAG, "dropped buffer size - %d", size); |
| goto exit; |
| } else if (rm->cardState == CARD_STATUS_OFFLINE) { |
| size = buf->size; |
| status = size; |
| PAL_DBG(LOG_TAG, "dropped buffer size - %d", size); |
| goto exit; |
| } else { |
| goto exit; |
| } |
| } |
| } else { |
| PAL_ERR(LOG_TAG, "Stream not started yet, state %d", currentState); |
| status = -EINVAL; |
| goto exit; |
| } |
| mStreamMutex.unlock(); |
| PAL_VERBOSE(LOG_TAG, "Exit. session read successful size - %d", size); |
| return size; |
| exit : |
| mStreamMutex.unlock(); |
| PAL_DBG(LOG_TAG, "Exit. session read failed status %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::write(struct pal_buffer* buf) |
| { |
| int32_t status = 0; |
| int32_t size = 0; |
| uint32_t frameSize = 0; |
| uint32_t byteWidth = 0; |
| uint32_t sampleRate = 0; |
| uint32_t channelCount = 0; |
| |
| PAL_VERBOSE(LOG_TAG, "Enter. session handle - %pK, state %d", |
| session, currentState); |
| |
| mStreamMutex.lock(); |
| // If cached state is not STREAM_IDLE, we are still processing SSR up. |
| if (rm->cardState == CARD_STATUS_OFFLINE |
| || cachedState != STREAM_IDLE) { |
| byteWidth = mStreamAttr->out_media_config.bit_width / 8; |
| sampleRate = mStreamAttr->out_media_config.sample_rate; |
| channelCount = mStreamAttr->out_media_config.ch_info.channels; |
| |
| frameSize = byteWidth * channelCount; |
| if ((frameSize == 0) || (sampleRate == 0)) { |
| PAL_ERR(LOG_TAG, "frameSize=%d, sampleRate=%d", frameSize, sampleRate); |
| mStreamMutex.unlock(); |
| status = -EINVAL; |
| goto exit; |
| } |
| size = buf->size; |
| usleep((uint64_t)size * 1000000 / frameSize / sampleRate); |
| PAL_DBG(LOG_TAG, "dropped buffer size - %d", size); |
| mStreamMutex.unlock(); |
| PAL_VERBOSE(LOG_TAG, "Exit size: %d", size); |
| return size; |
| } |
| |
| // we should allow writes to go through in Start/Pause state as well. |
| if ((currentState == STREAM_STARTED) || |
| (currentState == STREAM_PAUSED) ) { |
| status = session->write(this, SHMEM_ENDPOINT, buf, &size, 0); |
| mStreamMutex.unlock(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session write is failed with status %d", status); |
| |
| /* ENETRESET is the error code returned by AGM during SSR */ |
| if (errno == -ENETRESET && |
| rm->cardState != CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Sound card offline, informing RM"); |
| rm->ssrHandler(CARD_STATUS_OFFLINE); |
| size = buf->size; |
| status = size; |
| PAL_DBG(LOG_TAG, "dropped buffer size - %d", size); |
| goto exit; |
| } else if (rm->cardState == CARD_STATUS_OFFLINE) { |
| size = buf->size; |
| status = size; |
| PAL_DBG(LOG_TAG, "dropped buffer size - %d", size); |
| goto exit; |
| } else { |
| goto exit; |
| } |
| } else if (currentState == STREAM_PAUSED && !isPaused) { |
| rm->lockActiveStream(); |
| mStreamMutex.lock(); |
| for (int i = 0; i < mDevices.size(); i++) { |
| rm->registerDevice(mDevices[i], this); |
| } |
| mStreamMutex.unlock(); |
| rm->unlockActiveStream(); |
| currentState = STREAM_STARTED; |
| } |
| PAL_VERBOSE(LOG_TAG, "Exit. session write successful size - %d", size); |
| return size; |
| } else { |
| PAL_ERR(LOG_TAG, "Stream not started yet, state %d", currentState); |
| if (currentState == STREAM_STOPPED) |
| status = -EIO; |
| else |
| status = -EINVAL; |
| |
| mStreamMutex.unlock(); |
| goto exit; |
| } |
| |
| exit: |
| PAL_ERR(LOG_TAG, "Exit session write failed status %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::registerCallBack(pal_stream_callback /*cb*/, uint64_t /*cookie*/) |
| { |
| return 0; |
| } |
| |
| int32_t StreamPCM::getCallBack(pal_stream_callback * /*cb*/) |
| { |
| return 0; |
| } |
| |
| int32_t StreamPCM::getParameters(uint32_t /*param_id*/, void ** /*payload*/) |
| { |
| return 0; |
| } |
| |
| int32_t StreamPCM::setParameters(uint32_t param_id, void *payload) |
| { |
| int32_t status = 0; |
| int32_t setConfigStatus = 0; |
| pal_param_payload *param_payload = NULL; |
| effect_pal_payload_t *effectPalPayload = nullptr; |
| |
| PAL_DBG(LOG_TAG, "Enter, set parameter %u, session handle - %p", param_id, session); |
| |
| if (!payload) |
| { |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "wrong params"); |
| goto exit; |
| } |
| |
| mStreamMutex.lock(); |
| if (currentState == STREAM_IDLE) { |
| PAL_ERR(LOG_TAG, "Invalid stream state: IDLE for param ID: %d", param_id); |
| mStreamMutex.unlock(); |
| return -EINVAL; |
| } |
| // Stream may not know about tags, so use setParameters instead of setConfig |
| switch (param_id) { |
| case PAL_PARAM_ID_TTY_MODE: |
| { |
| param_payload = (pal_param_payload *)payload; |
| if (param_payload->payload_size > sizeof(uint32_t)) { |
| PAL_ERR(LOG_TAG, "Invalid payload size %d", param_payload->payload_size); |
| status = -EINVAL; |
| break; |
| } |
| uint32_t tty_mode = *((uint32_t *)param_payload->payload); |
| status = session->setParameters(this, TTY_MODE, param_id, payload); |
| if (status) |
| PAL_ERR(LOG_TAG, "setParam for tty mode %d failed with %d", |
| tty_mode, status); |
| break; |
| } |
| case PAL_PARAM_ID_DEVICE_ROTATION: |
| { |
| // Call Session for Setting the parameter. |
| if (NULL != session) { |
| /* To avoid pop while switching channels, it is required to mute |
| the playback first and then swap the channel and unmute */ |
| setConfigStatus = session->setConfig(this, MODULE, DEVICEPP_MUTE); |
| if (setConfigStatus) { |
| PAL_INFO(LOG_TAG, "DevicePP Mute failed"); |
| } |
| usleep(MUTE_RAMP_PERIOD); // Wait for Mute ramp down to happen |
| status = session->setParameters(this, 0, |
| PAL_PARAM_ID_DEVICE_ROTATION, |
| payload); |
| usleep(MUTE_RAMP_PERIOD); // Wait for channel swap to take affect |
| setConfigStatus = session->setConfig(this, MODULE, DEVICEPP_UNMUTE); |
| if (setConfigStatus) { |
| PAL_INFO(LOG_TAG, "DevicePP Unmute failed"); |
| } |
| } else { |
| PAL_ERR(LOG_TAG, "Session is null"); |
| status = -EINVAL; |
| } |
| } |
| break; |
| case PAL_PARAM_ID_VOLUME_BOOST: |
| { |
| status = session->setParameters(this, VOICE_VOLUME_BOOST, param_id, payload); |
| if (status) |
| PAL_ERR(LOG_TAG, "setParam for volume boost failed with %d", |
| status); |
| break; |
| } |
| case PAL_PARAM_ID_SLOW_TALK: |
| { |
| bool slow_talk = false; |
| param_payload = (pal_param_payload *)payload; |
| slow_talk = *((bool *)param_payload->payload); |
| |
| uint32_t slow_talk_tag = |
| slow_talk ? VOICE_SLOW_TALK_ON : VOICE_SLOW_TALK_OFF; |
| status = session->setParameters(this, slow_talk_tag, |
| param_id, payload); |
| if (status) |
| PAL_ERR(LOG_TAG, "setParam for slow talk failed with %d", |
| status); |
| break; |
| } |
| case PAL_PARAM_ID_DEVICE_MUTE: |
| { |
| status = session->setParameters(this, DEVICE_MUTE, |
| param_id, payload); |
| if (status) |
| PAL_ERR(LOG_TAG, "setParam for slow talk failed with %d", |
| status); |
| break; |
| } |
| default: |
| PAL_ERR(LOG_TAG, "Unsupported param id %u", param_id); |
| status = -EINVAL; |
| break; |
| } |
| |
| mStreamMutex.unlock(); |
| exit: |
| PAL_DBG(LOG_TAG, "exit, session parameter %u set with status %d", param_id, status); |
| return status; |
| } |
| |
| int32_t StreamPCM::mute_l(bool state) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK state %d", session, state); |
| status = session->setConfig(this, MODULE, state ? MUTE_TAG : UNMUTE_TAG); |
| PAL_DBG(LOG_TAG, "Exit status: %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::mute(bool state) |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| status = mute_l(state); |
| mStreamMutex.unlock(); |
| |
| return status; |
| } |
| |
| int32_t StreamPCM::pause_l() |
| { |
| int32_t status = 0; |
| std::unique_lock<std::mutex> pauseLock(pauseMutex); |
| struct pal_vol_ctrl_ramp_param ramp_param; |
| struct pal_volume_data *volume = NULL; |
| uint8_t volSize = 0; |
| struct pal_volume_data *voldata = NULL; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| cachedState = STREAM_PAUSED; |
| isPaused = true; |
| PAL_ERR(LOG_TAG, "Sound Card Offline, cached state %d", cachedState); |
| goto exit; |
| } |
| |
| if (isPaused) { |
| PAL_INFO(LOG_TAG, "Stream is already paused"); |
| } else { |
| //caching the volume before setting it to 0 |
| if (mVolumeData) { |
| voldata = (struct pal_volume_data *)calloc(1, (sizeof(uint32_t) + |
| (sizeof(struct pal_channel_vol_kv) * (mVolumeData->no_of_volpair)))); |
| } |
| if (!voldata) { |
| status = -ENOMEM; |
| goto exit; |
| } |
| |
| status = this->getVolumeData(voldata); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG,"getVolumeData Failed \n"); |
| goto exit; |
| } |
| /* set ramp period to 0 */ |
| ramp_param.ramp_period_ms = 0; |
| status = session->setParameters(this, TAG_STREAM_VOLUME, PAL_PARAM_ID_VOLUME_CTRL_RAMP, &ramp_param); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "session setParam for vol ctrl ramp failed with status %d", status); |
| |
| volSize = sizeof(uint32_t) + (sizeof(struct pal_channel_vol_kv) * (voldata->no_of_volpair)); |
| volRampPeriodms = 0; |
| status = 0; /* not fatal , reset status to 0 */ |
| /* set volume to 0 */ |
| volume = (struct pal_volume_data *)malloc(sizeof(struct pal_volume_data) |
| +sizeof(struct pal_channel_vol_kv)); |
| if (!volume) { |
| PAL_ERR(LOG_TAG, "Failed to allocate mem for volume"); |
| status = -ENOMEM; |
| goto exit; |
| } |
| volume->no_of_volpair = 1; |
| volume->volume_pair[0].channel_mask = 0x03; |
| volume->volume_pair[0].vol = 0x0; |
| setVolume(volume); |
| if (mVolumeData) { |
| free(mVolumeData); |
| mVolumeData = NULL; |
| } |
| mVolumeData = (struct pal_volume_data *)calloc(1, volSize); |
| if (!mVolumeData) { |
| PAL_ERR(LOG_TAG, "failed to calloc for volume data"); |
| status = -ENOMEM; |
| goto exit; |
| } |
| ar_mem_cpy(mVolumeData, volSize, voldata, volSize); |
| |
| status = session->setConfig(this, MODULE, PAUSE_TAG); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setConfig for pause failed with status %d", |
| status); |
| goto exit; |
| } |
| if (session->isPauseRegistrationDone) { |
| PAL_DBG(LOG_TAG, "Waiting for Pause to complete from ADSP"); |
| pauseCV.wait_for(pauseLock, std::chrono::microseconds(VOLUME_RAMP_PERIOD)); |
| } else { |
| PAL_DBG(LOG_TAG, "Pause event registration not done, sleeping for %d", VOLUME_RAMP_PERIOD); |
| usleep(VOLUME_RAMP_PERIOD); |
| } |
| isPaused = true; |
| currentState = STREAM_PAUSED; |
| PAL_DBG(LOG_TAG, "session setConfig successful"); |
| } |
| exit: |
| PAL_DBG(LOG_TAG, "Exit status: %d", status); |
| if (volume) { |
| free(volume); |
| volume = NULL; |
| } |
| if (voldata) { |
| free(voldata); |
| voldata = NULL; |
| } |
| return status; |
| } |
| |
| int32_t StreamPCM::pause() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| status = pause_l(); |
| mStreamMutex.unlock(); |
| |
| return status; |
| } |
| |
| int32_t StreamPCM::resume_l() |
| { |
| int32_t status = 0; |
| struct pal_vol_ctrl_ramp_param ramp_param; |
| struct pal_volume_data *voldata = NULL; |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| cachedState = STREAM_STARTED; |
| PAL_ERR(LOG_TAG, "Sound Card offline, cached state %d", cachedState); |
| goto exit; |
| } |
| |
| status = session->setConfig(this, MODULE, RESUME_TAG); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setConfig for resume failed with status %d", |
| status); |
| goto exit; |
| } |
| |
| if (mStreamAttr->direction == PAL_AUDIO_OUTPUT && |
| (mStreamAttr->type == PAL_STREAM_LOW_LATENCY || |
| mStreamAttr->type == PAL_STREAM_PCM_OFFLOAD || |
| mStreamAttr->type == PAL_STREAM_DEEP_BUFFER)) { |
| pal_param_device_rotation_t rotation; |
| rotation.rotation_type = rm->mOrientation == ORIENTATION_270 ? |
| PAL_SPEAKER_ROTATION_RL : PAL_SPEAKER_ROTATION_LR; |
| status = session->setParameters(this, 0, PAL_PARAM_ID_DEVICE_ROTATION, &rotation); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setParameters for rotation failed with status %d", |
| status); |
| } |
| } |
| |
| /* set ramp period to default */ |
| if (volRampPeriodms == 0) { |
| ramp_param.ramp_period_ms = 0x28; |
| status = session->setParameters(this, TAG_STREAM_VOLUME, PAL_PARAM_ID_VOLUME_CTRL_RAMP, &ramp_param); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setParam for vol ctrl ramp failed with status %d", status); |
| } else { |
| volRampPeriodms = 0x28; |
| } |
| status = 0; |
| } |
| |
| isPaused = false; |
| |
| //since we set the volume to 0 in pause, in resume we need to set vol back to default |
| if (mVolumeData) { |
| voldata = (struct pal_volume_data *)calloc(1, (sizeof(uint32_t) + |
| (sizeof(struct pal_channel_vol_kv) * (mVolumeData->no_of_volpair)))); |
| } |
| if (!voldata) { |
| status = -ENOMEM; |
| goto exit; |
| } |
| |
| status = this->getVolumeData(voldata); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG,"getVolumeData Failed \n"); |
| goto exit; |
| } |
| |
| setVolume(voldata); |
| free(voldata); |
| PAL_DBG(LOG_TAG, "session setConfig successful"); |
| exit: |
| PAL_DBG(LOG_TAG, "Exit status: %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::resume() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| status = resume_l(); |
| mStreamMutex.unlock(); |
| |
| return status; |
| } |
| |
| int32_t StreamPCM::flush() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| if (isPaused == false) { |
| PAL_ERR(LOG_TAG, "Error, flush called while stream is not Paused isPaused:%d", isPaused); |
| goto exit; |
| } |
| |
| if (mStreamAttr->type != PAL_STREAM_PCM_OFFLOAD) { |
| PAL_VERBOSE(LOG_TAG, "flush called for non PCM OFFLOAD stream, ignore"); |
| goto exit; |
| } |
| |
| if (currentState == STREAM_STOPPED || currentState == STREAM_IDLE) { |
| PAL_ERR(LOG_TAG, "Already flushed, state %d", currentState); |
| goto exit; |
| } |
| |
| status = session->flush(); |
| exit: |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| int32_t StreamPCM::isSampleRateSupported(uint32_t sampleRate) |
| { |
| int32_t rc = 0; |
| PAL_DBG(LOG_TAG, "sampleRate %u", sampleRate); |
| switch(sampleRate) { |
| case SAMPLINGRATE_8K: |
| case SAMPLINGRATE_16K: |
| case SAMPLINGRATE_22K: |
| case SAMPLINGRATE_32K: |
| case SAMPLINGRATE_44K: |
| case SAMPLINGRATE_48K: |
| case SAMPLINGRATE_96K: |
| case SAMPLINGRATE_192K: |
| case SAMPLINGRATE_384K: |
| break; |
| default: |
| rc = 0; |
| PAL_VERBOSE(LOG_TAG, "sample rate received %d rc %d", sampleRate, rc); |
| break; |
| } |
| return rc; |
| } |
| |
| int32_t StreamPCM::isChannelSupported(uint32_t numChannels) |
| { |
| int32_t rc = 0; |
| PAL_DBG(LOG_TAG, "numChannels %u", numChannels); |
| switch(numChannels) { |
| case CHANNELS_1: |
| case CHANNELS_2: |
| case CHANNELS_3: |
| case CHANNELS_4: |
| case CHANNELS_5: |
| case CHANNELS_5_1: |
| case CHANNELS_7: |
| case CHANNELS_8: |
| break; |
| default: |
| rc = -EINVAL; |
| PAL_ERR(LOG_TAG, "channels not supported %d rc %d", numChannels, rc); |
| break; |
| } |
| return rc; |
| } |
| |
| int32_t StreamPCM::isBitWidthSupported(uint32_t bitWidth) |
| { |
| int32_t rc = 0; |
| PAL_DBG(LOG_TAG, "bitWidth %u", bitWidth); |
| switch(bitWidth) { |
| case BITWIDTH_16: |
| case BITWIDTH_24: |
| case BITWIDTH_32: |
| break; |
| default: |
| rc = -EINVAL; |
| PAL_ERR(LOG_TAG, "bit width not supported %d rc %d", bitWidth, rc); |
| break; |
| } |
| return rc; |
| } |
| |
| int32_t StreamPCM::addRemoveEffect(pal_audio_effect_t effect, bool enable) |
| { |
| int32_t status = 0; |
| int32_t tag = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| mStreamMutex.lock(); |
| if (!enable) { |
| if (PAL_AUDIO_EFFECT_ECNS == effect) { |
| tag = ECNS_OFF_TAG; |
| } |
| } else { |
| if (PAL_AUDIO_EFFECT_EC == effect) { |
| tag = EC_ON_TAG; |
| } else if (PAL_AUDIO_EFFECT_NS == effect) { |
| tag = NS_ON_TAG; |
| } else if (PAL_AUDIO_EFFECT_ECNS == effect) { |
| tag = ECNS_ON_TAG; |
| } else { |
| PAL_ERR(LOG_TAG, "Invalid effect ID %d", effect); |
| status = -EINVAL; |
| goto exit; |
| } |
| } |
| status = session->setConfig(this, MODULE, tag); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session setConfig for addRemoveEffect failed with status %d", |
| status); |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "session setConfig successful"); |
| exit: |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| int32_t StreamPCM::setECRef(std::shared_ptr<Device> dev, bool is_enable) |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| status = setECRef_l(dev, is_enable); |
| mStreamMutex.unlock(); |
| |
| return status; |
| } |
| |
| int32_t StreamPCM::setECRef_l(std::shared_ptr<Device> dev, bool is_enable) |
| { |
| int32_t status = 0; |
| |
| if (!session) |
| return -EINVAL; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| |
| status = session->setECRef(this, dev, is_enable); |
| if (status) { |
| PAL_ERR(LOG_TAG, "Failed to set ec ref in session"); |
| } |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| |
| return status; |
| } |
| |
| int32_t StreamPCM::ssrDownHandler() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| /* Updating cached state here only if it's STREAM_IDLE, |
| * Otherwise we can assume it is updated by hal thread |
| * already. |
| */ |
| if (cachedState == STREAM_IDLE) |
| cachedState = currentState; |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK cached State %d", |
| session, cachedState); |
| |
| if (currentState == STREAM_INIT || currentState == STREAM_STOPPED) { |
| mStreamMutex.unlock(); |
| status = close(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream close failed. status %d", status); |
| goto exit; |
| } |
| } else if (currentState == STREAM_STARTED || currentState == STREAM_PAUSED) { |
| mStreamMutex.unlock(); |
| rm->unlockActiveStream(); |
| status = stop(); |
| rm->lockActiveStream(); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "stream stop failed. status %d", status); |
| status = close(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream close failed. status %d", status); |
| goto exit; |
| } |
| } else { |
| PAL_ERR(LOG_TAG, "stream state is %d, nothing to handle", currentState); |
| mStreamMutex.unlock(); |
| goto exit; |
| } |
| |
| exit : |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| currentState = STREAM_IDLE; |
| return status; |
| } |
| |
| int32_t StreamPCM::ssrUpHandler() |
| { |
| int32_t status = 0; |
| |
| mStreamMutex.lock(); |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK state %d", |
| session, cachedState); |
| |
| if (cachedState == STREAM_INIT) { |
| mStreamMutex.unlock(); |
| status = open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream open failed. status %d", status); |
| goto exit; |
| } |
| } else if (cachedState == STREAM_STARTED) { |
| mStreamMutex.unlock(); |
| status = open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream open failed. status %d", status); |
| goto exit; |
| } |
| rm->unlockActiveStream(); |
| status = start(); |
| rm->lockActiveStream(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream start failed. status %d", status); |
| goto exit; |
| } |
| /* For scenario when we get SSR down while handling SSR up, |
| * status will be 0, so we need to have this additonal check |
| * to keep the cached state as STREAM_STARTED. |
| */ |
| if (currentState != STREAM_STARTED) { |
| goto exit; |
| } |
| } else if (cachedState == STREAM_PAUSED) { |
| mStreamMutex.unlock(); |
| status = open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream open failed. status %d", status); |
| goto exit; |
| } |
| rm->unlockActiveStream(); |
| status = start(); |
| rm->lockActiveStream(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream start failed. status %d", status); |
| goto exit; |
| } |
| if (currentState != STREAM_STARTED) |
| goto exit; |
| status = pause(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "stream set pause failed. status %d", status); |
| goto exit; |
| } |
| } else { |
| mStreamMutex.unlock(); |
| PAL_ERR(LOG_TAG, "stream not in correct state to handle %d", cachedState); |
| } |
| exit : |
| cachedState = STREAM_IDLE; |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::createMmapBuffer(int32_t min_size_frames, |
| struct pal_mmap_buffer *info) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| mStreamMutex.lock(); |
| if (currentState == STREAM_INIT) { |
| rm->lockGraph(); |
| for (int32_t i=0; i < mDevices.size(); i++) { |
| if ((mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_A2DP) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_BLUETOOTH_BLE) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_OUT_SPEAKER) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_IN_BLUETOOTH_BLE) || |
| (mDevices[i]->getSndDeviceId() == PAL_DEVICE_IN_BLUETOOTH_SCO_HEADSET)) { |
| PAL_DBG(LOG_TAG, "start BT/Speaker devices to configure graph properly"); |
| status = mDevices[i]->start(); |
| if ((0 != status) && mDevices.size() == 1) { |
| PAL_ERR(LOG_TAG, "device start failed: %d", status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| } |
| } |
| status = session->createMmapBuffer(this, min_size_frames, info); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "session prepare failed with status = %d", status); |
| rm->unlockGraph(); |
| goto exit; |
| } |
| isMMap = true; |
| rm->unlockGraph(); |
| } else { |
| status = -EINVAL; |
| } |
| |
| exit: |
| mStreamMutex.unlock(); |
| PAL_DBG(LOG_TAG, "Exit. status - %d", status); |
| return status; |
| } |
| |
| int32_t StreamPCM::GetMmapPosition(struct pal_mmap_position *position) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK", session); |
| |
| mStreamMutex.lock(); |
| status = session->GetMmapPosition(this, position); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "session prepare failed with status = %d", status); |
| mStreamMutex.unlock(); |
| PAL_DBG(LOG_TAG, "Exit. status - %d", status); |
| |
| return status; |
| } |
| |