| /* |
| * Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center, Inc. are provided under the following license: |
| * Copyright (c) 2022, 2024 Qualcomm Innovation Center, Inc. All rights reserved. |
| * SPDX-License-Identifier: BSD-3-Clause-Clear |
| */ |
| |
| #define LOG_TAG "PAL: StreamSensorPCMData" |
| |
| #include "StreamSensorPCMData.h" |
| #include "Session.h" |
| #include "kvh2xml.h" |
| #include "SessionAlsaPcm.h" |
| #include "ResourceManager.h" |
| #include "Device.h" |
| #include <unistd.h> |
| |
| StreamSensorPCMData::StreamSensorPCMData(const struct pal_stream_attributes *sattr __unused, |
| struct pal_device *dattr __unused, |
| const uint32_t no_of_devices __unused, |
| const struct modifier_kv *modifiers __unused, |
| const uint32_t no_of_modifiers __unused, |
| const std::shared_ptr<ResourceManager> rm): |
| StreamCommon(sattr,dattr,no_of_devices,modifiers,no_of_modifiers,rm) |
| { |
| int32_t enable_concurrency_count = 0; |
| int32_t disable_concurrency_count = 0; |
| paused_ = false; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| /* get ACD platform info */ |
| acd_info_ = ACDPlatformInfo::GetInstance(); |
| if (!acd_info_) { |
| PAL_ERR(LOG_TAG, "Error:%d Failed to get acd platform info", -EINVAL); |
| throw std::runtime_error("Failed to get acd platform info"); |
| } |
| |
| rm->registerStream(this); |
| /* Print the concurrency feature flags supported */ |
| PAL_INFO(LOG_TAG, "capture conc enable %d,voice conc enable %d,voip conc enable %d", |
| acd_info_->GetConcurrentCaptureEnable(), |
| acd_info_->GetConcurrentVoiceCallEnable(), |
| acd_info_->GetConcurrentVoipCallEnable()); |
| |
| /* check concurrency count from rm */ |
| rm->GetSoundTriggerConcurrencyCount(PAL_STREAM_SENSOR_PCM_DATA, |
| &enable_concurrency_count, |
| &disable_concurrency_count); |
| |
| /* check if lpi should be used */ |
| use_lpi_ = rm->getLPIUsage(); |
| |
| /* |
| * When voice/voip/record is active and concurrency is not |
| * supported, mark paused as true, so that start stream |
| * will be skipped and when voice/voip/record stops, stream |
| * will be resumed. |
| */ |
| if (disable_concurrency_count) { |
| paused_ = true; |
| } |
| |
| PAL_DBG(LOG_TAG, "Exit"); |
| } |
| |
| StreamSensorPCMData::~StreamSensorPCMData() |
| { |
| PAL_DBG(LOG_TAG, "Enter"); |
| rm->resetStreamInstanceID(this); |
| rm->deregisterStream(this); |
| mDevices.clear(); |
| PAL_DBG(LOG_TAG, "Exit"); |
| } |
| |
| int32_t StreamSensorPCMData::open() |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter."); |
| |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| PAL_ERR(LOG_TAG, "Error:Sound card offline, can not open stream"); |
| usleep(SSR_RECOVERY); |
| status = -EIO; |
| goto exit; |
| } |
| |
| if (currentState == STREAM_IDLE) { |
| currentState = STREAM_INIT; |
| PAL_DBG(LOG_TAG, "streamLL opened. state %d", currentState); |
| } else if (currentState == STREAM_INIT) { |
| PAL_INFO(LOG_TAG, "Stream is already opened, state %d", currentState); |
| status = 0; |
| goto exit; |
| } else { |
| PAL_ERR(LOG_TAG, "Error:Stream is not in correct state %d", currentState); |
| status = -EINVAL; |
| goto exit; |
| } |
| exit: |
| PAL_DBG(LOG_TAG, "Exit ret %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::close() |
| { |
| int32_t status = 0; |
| mStreamMutex.lock(); |
| |
| if (currentState == STREAM_IDLE) { |
| PAL_INFO(LOG_TAG, "Stream is already closed"); |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle - %pK device count - %zu stream_type - %d state %d", |
| session, mDevices.size(), mStreamAttr->type, currentState); |
| |
| if (currentState == STREAM_STARTED) { |
| mStreamMutex.unlock(); |
| status = stop(); |
| if (0 != status) |
| PAL_ERR(LOG_TAG, "Error:stream stop failed. status %d", status); |
| mStreamMutex.lock(); |
| } |
| rm->lockGraph(); |
| status = session->close(this); |
| rm->unlockGraph(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:session close failed with status %d", status); |
| } |
| currentState = STREAM_IDLE; |
| |
| mStreamMutex.unlock(); |
| |
| PAL_DBG(LOG_TAG, "Exit ret %d", status); |
| return status; |
| } |
| int32_t StreamSensorPCMData::start() |
| { |
| int32_t status = 0; |
| bool backend_update = false; |
| std::shared_ptr<Device> device = nullptr; |
| |
| PAL_DBG(LOG_TAG, |
| "Enter. session handle: %pK, state: %d, paused_: %s", |
| session, currentState, paused_ ? "True" : "False"); |
| |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| if (true == paused_) { |
| PAL_DBG(LOG_TAG,"concurrency is not supported, start the stream later"); |
| goto exit; |
| } |
| |
| if (rm->cardState == CARD_STATUS_OFFLINE) { |
| cachedState = STREAM_STARTED; |
| PAL_ERR(LOG_TAG, "Error:Sound card offline. Update the cached state %d", |
| cachedState); |
| goto exit; |
| } |
| |
| if (currentState == STREAM_INIT || currentState == STREAM_STOPPED || |
| currentState == STREAM_PAUSED) { |
| device = GetPalDevice(this, GetAvailCaptureDevice()); |
| if (!device) { |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "Error:%d Device creation is failed", status); |
| goto exit; |
| } |
| |
| status = device->open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: device [%d] open failed with status %d", |
| device->getSndDeviceId(), status); |
| goto exit; |
| } |
| |
| if (currentState != STREAM_PAUSED) { |
| mDevices.clear(); |
| mDevices.push_back(device); |
| |
| status = session->open(this); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:session open failed with status %d", status); |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "session open successful"); |
| |
| /* Do not update capture profile when resuming stream */ |
| backend_update = rm->UpdateSoundTriggerCaptureProfile(this, true); |
| if (backend_update) { |
| status = rm->StopOtherDetectionStreams(this); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to stop other Detection streams", status); |
| |
| status = rm->StartOtherDetectionStreams(this); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to start other Detection streams", status); |
| } |
| } |
| |
| status = device->start(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: device [%d] start failed with status %d", |
| device->getSndDeviceId(), status); |
| device->close(); |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "device [%d] opened and started successfully", |
| device->getSndDeviceId()); |
| |
| rm->registerDevice(device, this); |
| |
| status = startSession(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: start session failed with status %d", status); |
| device->stop(); |
| rm->deregisterDevice(device, this); |
| device->close(); |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "session start successful"); |
| |
| /* |
| * pcm_open and pcm_start done at once here, |
| * so directly jump to STREAM_STARTED state. |
| */ |
| currentState = STREAM_STARTED; |
| } else if (currentState == STREAM_STARTED) { |
| PAL_INFO(LOG_TAG, "Stream already started, state %d", currentState); |
| } else { |
| PAL_ERR(LOG_TAG, "Error:Stream is not opened yet"); |
| status = -EINVAL; |
| } |
| |
| exit: |
| PAL_DBG(LOG_TAG, "Exit. state %d, status %d", currentState, status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::stop() |
| { |
| int32_t status = 0; |
| bool backend_update = false; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle: %pK, state: %d, paused_: %s", |
| session, currentState, paused_ ? "True" : "False"); |
| |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| |
| if (currentState == STREAM_STARTED || currentState == STREAM_PAUSED) { |
| /* Do not update capture profile when pausing stream */ |
| if (false == paused_) { |
| backend_update = rm->UpdateSoundTriggerCaptureProfile(this, false); |
| if (backend_update) { |
| status = rm->StopOtherDetectionStreams(this); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to stop other Detection streams", status); |
| } |
| } |
| |
| status = session->stop(this); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%s session stop failed with status %d", |
| GET_DIR_STR(mStreamAttr->direction), status); |
| |
| for (int32_t i = 0; i < mDevices.size(); i++) { |
| status = mDevices[i]->stop(); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error: device [%d] stop failed with status %d", |
| mDevices[i]->getSndDeviceId(), status); |
| |
| rm->deregisterDevice(mDevices[i], this); |
| |
| status = mDevices[i]->close(); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error: device [%d] close failed with status %d", |
| mDevices[i]->getSndDeviceId(), status); |
| PAL_DBG(LOG_TAG, "device [%d] close successful", mDevices[i]->getSndDeviceId()); |
| } |
| |
| if (backend_update) { |
| status = rm->StartOtherDetectionStreams(this); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to start other Detection streams", status); |
| } |
| |
| currentState = STREAM_STOPPED; |
| } else if (currentState == STREAM_STOPPED || currentState == STREAM_IDLE) { |
| PAL_INFO(LOG_TAG, "Stream is already in Stopped/idle state %d", currentState); |
| } else { |
| PAL_ERR(LOG_TAG, "Error:Stream should be in start/pause state, %d", currentState); |
| status = -EINVAL; |
| } |
| PAL_DBG(LOG_TAG, "Exit. status %d, state %d", status, currentState); |
| |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::Resume() |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| paused_ = false; |
| status = start(); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Resume Stream failed", status); |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::Pause() |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| paused_ = true; |
| status = stop(); |
| if (!status) |
| currentState = STREAM_PAUSED; |
| else |
| PAL_ERR(LOG_TAG, "Error:%d Pause Stream failed", status); |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| void StreamSensorPCMData::GetUUID(class SoundTriggerUUID *uuid, |
| const struct st_uuid *vendor_uuid) |
| { |
| uuid->timeLow = (uint32_t)vendor_uuid->timeLow; |
| uuid->timeMid = (uint16_t)vendor_uuid->timeMid; |
| uuid->timeHiAndVersion = (uint16_t)vendor_uuid->timeHiAndVersion; |
| uuid->clockSeq = (uint16_t)vendor_uuid->clockSeq; |
| uuid->node[0] = (uint8_t)vendor_uuid->node[0]; |
| uuid->node[1] = (uint8_t)vendor_uuid->node[1]; |
| uuid->node[2] = (uint8_t)vendor_uuid->node[2]; |
| uuid->node[3] = (uint8_t)vendor_uuid->node[3]; |
| uuid->node[4] = (uint8_t)vendor_uuid->node[4]; |
| uuid->node[5] = (uint8_t)vendor_uuid->node[5]; |
| PAL_INFO(LOG_TAG, "Input vendor uuid : %08x-%04x-%04x-%04x-%02x%02x%02x%02x%02x%02x", |
| uuid->timeLow, uuid->timeMid, uuid->timeHiAndVersion, uuid->clockSeq, |
| uuid->node[0], uuid->node[1], uuid->node[2], uuid->node[3], uuid->node[4], |
| uuid->node[5]); |
| } |
| |
| /* Use below UUID for Sensor PCM Data usecase */ |
| static const struct st_uuid qc_sensor_pcm_data_uuid = |
| { 0xc88a2c89, 0x7a55, 0x498c, 0x836f, { 0x5d, 0x7e, 0xc8, 0x58, 0x29, 0x90 } }; |
| |
| struct st_uuid StreamSensorPCMData::GetVendorUuid() |
| { |
| return qc_sensor_pcm_data_uuid; |
| } |
| |
| int32_t StreamSensorPCMData::SetupStreamConfig(const struct st_uuid *vendor_uuid) |
| { |
| int32_t status = 0; |
| class SoundTriggerUUID uuid; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| GetUUID(&uuid, vendor_uuid); |
| |
| if (NULL == sm_cfg_) { |
| sm_cfg_ = acd_info_->GetStreamConfig(uuid); |
| if (!sm_cfg_) { |
| status = -EINVAL; |
| goto exit; |
| } |
| } |
| |
| mStreamSelector = sm_cfg_->GetStreamConfigName(); |
| mInstanceID = rm->getStreamInstanceID(this); |
| |
| exit: |
| if (status) |
| PAL_ERR(LOG_TAG, "SetupStreamConfig failed with status %d", status); |
| PAL_DBG(LOG_TAG, "Exit, status %d, mInstanceID is %d", status, mInstanceID); |
| return status; |
| } |
| |
| pal_device_id_t StreamSensorPCMData::GetAvailCaptureDevice() |
| { |
| if (acd_info_->GetSupportDevSwitch() && |
| rm->isDeviceAvailable(PAL_DEVICE_IN_WIRED_HEADSET)) |
| return PAL_DEVICE_IN_HEADSET_VA_MIC; |
| else |
| return PAL_DEVICE_IN_HANDSET_VA_MIC; |
| } |
| |
| std::shared_ptr<CaptureProfile> StreamSensorPCMData::GetCurrentCaptureProfile() |
| { |
| std::shared_ptr<CaptureProfile> cap_prof = nullptr; |
| enum StInputModes input_mode = ST_INPUT_MODE_HANDSET; |
| enum StOperatingModes operating_mode = ST_OPERATING_MODE_HIGH_PERF_NS; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (GetAvailCaptureDevice() == PAL_DEVICE_IN_HEADSET_VA_MIC) |
| input_mode = ST_INPUT_MODE_HEADSET; |
| |
| /* Check use_lpi_ here again to determine the actual operating_mode */ |
| if ((DEVICEPP_TX_RAW_LPI == pcm_data_stream_effect || |
| DEVICEPP_TX_FLUENCE_FFEC == pcm_data_stream_effect) |
| && use_lpi_) |
| operating_mode = ST_OPERATING_MODE_LOW_POWER; |
| else if ((DEVICEPP_TX_RAW_LPI == pcm_data_stream_effect || |
| DEVICEPP_TX_FLUENCE_FFEC == pcm_data_stream_effect) |
| && !use_lpi_) |
| operating_mode = ST_OPERATING_MODE_HIGH_PERF; |
| else if ((DEVICEPP_TX_FLUENCE_FFNS == pcm_data_stream_effect || |
| DEVICEPP_TX_FLUENCE_FFECNS == pcm_data_stream_effect) |
| && use_lpi_) |
| operating_mode = ST_OPERATING_MODE_LOW_POWER_NS; |
| else if ((DEVICEPP_TX_FLUENCE_FFNS == pcm_data_stream_effect || |
| DEVICEPP_TX_FLUENCE_FFECNS == pcm_data_stream_effect) |
| && !use_lpi_) |
| operating_mode = ST_OPERATING_MODE_HIGH_PERF_NS; |
| |
| cap_prof = sm_cfg_->GetCaptureProfile(std::make_pair(operating_mode, input_mode)); |
| |
| if (cap_prof) { |
| PAL_DBG(LOG_TAG, "cap_prof %s: bw=%d, chs=%d, sr=%d, snd_name=%s, ec_ref=%d", |
| cap_prof->GetName().c_str(), cap_prof->GetBitWidth(), |
| cap_prof->GetChannels(), cap_prof->GetSampleRate(), |
| cap_prof->GetSndName().c_str(), cap_prof->isECRequired()); |
| } else { |
| PAL_ERR(LOG_TAG, "Invalid capture profile"); |
| } |
| |
| return cap_prof; |
| } |
| |
| int32_t StreamSensorPCMData::addRemoveEffect(pal_audio_effect_t effect, bool enable) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter. session handle: %pK", session); |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| |
| /* Check use_lpi_ here to determine if EC is needed */ |
| if (enable) { |
| if (PAL_AUDIO_EFFECT_NONE == effect && use_lpi_) { |
| pcm_data_stream_effect = DEVICEPP_TX_RAW_LPI; |
| } else if (PAL_AUDIO_EFFECT_NS == effect && use_lpi_) { |
| pcm_data_stream_effect = DEVICEPP_TX_FLUENCE_FFNS; |
| } else if (PAL_AUDIO_EFFECT_NONE == effect && !use_lpi_) { |
| pcm_data_stream_effect = DEVICEPP_TX_FLUENCE_FFEC; |
| } else if (PAL_AUDIO_EFFECT_NS == effect && !use_lpi_) { |
| pcm_data_stream_effect = DEVICEPP_TX_FLUENCE_FFECNS; |
| } else { |
| PAL_ERR(LOG_TAG, "Invalid effect ID %d", effect); |
| status = -EINVAL; |
| goto exit; |
| } |
| } else { |
| PAL_DBG(LOG_TAG, "Exit, no stream effect is set"); |
| status = -EINVAL; |
| goto exit; |
| } |
| |
| /* Use QC Sensor PCM Data as default streamConfig */ |
| status = SetupStreamConfig(&qc_sensor_pcm_data_uuid); |
| if (status) |
| goto exit; |
| |
| cap_prof_ = GetCurrentCaptureProfile(); |
| if (cap_prof_) { |
| mDevPPSelector = cap_prof_->GetName(); |
| } else { |
| status = -EINVAL; |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "Exit. addRemoveEffect successful"); |
| |
| exit: |
| if (status) |
| PAL_ERR(LOG_TAG, "addRemoveEffect failed with status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::HandleConcurrentStream(bool active) |
| { |
| int32_t status = 0; |
| std::shared_ptr<CaptureProfile> new_cap_prof = nullptr; |
| |
| PAL_DBG(LOG_TAG, "Enter, active:%d", active); |
| |
| if (active == false) |
| mStreamMutex.lock(); |
| |
| if (currentState != STREAM_STARTED) { |
| PAL_INFO(LOG_TAG, "Stream is not in started state"); |
| if (active == true) |
| mStreamMutex.unlock(); |
| return status; |
| } |
| |
| new_cap_prof = GetCurrentCaptureProfile(); |
| if (new_cap_prof && cap_prof_ != new_cap_prof) { |
| PAL_DBG(LOG_TAG, |
| "current capture profile %s: dev_id=0x%x, chs=%d, sr=%d, ec_ref=%d\n", |
| cap_prof_->GetName().c_str(), |
| cap_prof_->GetDevId(), |
| cap_prof_->GetChannels(), |
| cap_prof_->GetSampleRate(), |
| cap_prof_->isECRequired()); |
| PAL_DBG(LOG_TAG, |
| "new capture profile %s: dev_id=0x%x, chs=%d, sr=%d, ec_ref=%d\n", |
| new_cap_prof->GetName().c_str(), |
| new_cap_prof->GetDevId(), |
| new_cap_prof->GetChannels(), |
| new_cap_prof->GetSampleRate(), |
| new_cap_prof->isECRequired()); |
| |
| if (!active) { |
| PAL_DBG(LOG_TAG, "disconnect device %d", GetAvailCaptureDevice()); |
| /* disconnect the backend device */ |
| status = DisconnectDevice_l(GetAvailCaptureDevice()); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to disconnect device %d", |
| status, GetAvailCaptureDevice()); |
| } else { |
| /* store the pre-proc KV selected in the config file */ |
| if (new_cap_prof) |
| mDevPPSelector = new_cap_prof->GetName(); |
| /* connect the backend device */ |
| PAL_DBG(LOG_TAG, "connect device %d", GetAvailCaptureDevice()); |
| status = ConnectDevice_l(GetAvailCaptureDevice()); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to connect device %d", |
| status, GetAvailCaptureDevice()); |
| } |
| } else { |
| PAL_INFO(LOG_TAG, "no action needed, same capture profile"); |
| } |
| |
| if (active == true) |
| mStreamMutex.unlock(); |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::EnableLPI(bool is_enable) |
| { |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| if (!rm->IsLPISupported(PAL_STREAM_SENSOR_PCM_DATA)) { |
| PAL_DBG(LOG_TAG, "Ignored as LPI not supported"); |
| } else { |
| use_lpi_ = is_enable; |
| } |
| |
| PAL_DBG(LOG_TAG, "%s is enabled", is_enable ? "LPI" : "NLPI"); |
| return 0; |
| } |
| |
| int32_t StreamSensorPCMData::DisconnectDevice_l(pal_device_id_t device_id) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter, device_id: %d", device_id); |
| if (mDevices[0]->getSndDeviceId() != device_id) { |
| PAL_ERR(LOG_TAG, "Error:%d Device %d not connected, ignore", |
| -EINVAL, device_id); |
| goto exit; |
| } |
| |
| this->rm->deregisterDevice(mDevices[0], this); |
| |
| if (session) |
| status = session->disconnectSessionDevice(this, |
| this->mStreamAttr->type, |
| mDevices[0]); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to disconnect device %d", |
| status, device_id); |
| |
| status = mDevices[0]->stop(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:%d device stop failed", status); |
| goto disconnect_err; |
| } |
| |
| status = mDevices[0]->close(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:%d device close failed", status); |
| goto disconnect_err; |
| } |
| |
| disconnect_err: |
| mDevices.clear(); |
| exit: |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::DisconnectDevice(pal_device_id_t device_id) |
| { |
| int32_t status = -EINVAL; |
| |
| PAL_DBG(LOG_TAG, "Enter, device_id: %d", device_id); |
| /* |
| * NOTE: mStreamMutex will be unlocked after ConnectDevice handled |
| * because device disconnect/connect should be handled sequencely, |
| * and no other commands from client should be handled between |
| * device disconnect and connect. |
| */ |
| mStreamMutex.lock(); |
| status = DisconnectDevice_l(device_id); |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::ConnectDevice_l(pal_device_id_t device_id) |
| { |
| int32_t status = 0; |
| std::shared_ptr<Device> device = nullptr; |
| |
| PAL_DBG(LOG_TAG, "Enter, device_id: %d", device_id); |
| |
| device = GetPalDevice(this, device_id); |
| if (!device) { |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "Error:%d Device creation is failed", status); |
| goto connect_err; |
| } |
| |
| status = device->open(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:%d device %d open failed", status, |
| device->getSndDeviceId()); |
| goto connect_err; |
| } |
| mDevices.clear(); |
| mDevices.push_back(device); |
| |
| /* Update capture profile and mDevPPSelector */ |
| cap_prof_ = GetCurrentCaptureProfile(); |
| if (cap_prof_) |
| mDevPPSelector = cap_prof_->GetName(); |
| else |
| PAL_ERR(LOG_TAG, "Failed to update capture profile and mDevPPSelector"); |
| |
| if (session) |
| status = session->setupSessionDevice(this, |
| this->mStreamAttr->type, |
| device); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:%d setupSessionDevice for %d failed", |
| status, device->getSndDeviceId()); |
| device->close(); |
| goto connect_err; |
| } |
| |
| status = device->start(); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error:%d device %d start failed", |
| status, device->getSndDeviceId()); |
| device->close(); |
| goto connect_err; |
| } |
| |
| if (session) |
| status = session->connectSessionDevice(this, |
| this->mStreamAttr->type, |
| device); |
| if (status) { |
| PAL_ERR(LOG_TAG, "Error:%d Failed to connect device %d", |
| status, device_id); |
| device->stop(); |
| device->close(); |
| } else { |
| this->rm->registerDevice(device, this); |
| } |
| |
| connect_err: |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::ConnectDevice(pal_device_id_t device_id) |
| { |
| int32_t status = -EINVAL; |
| |
| PAL_DBG(LOG_TAG, "Enter, device_id: %d", device_id); |
| |
| status = ConnectDevice_l(device_id); |
| mStreamMutex.unlock(); |
| |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::setECRef_l(std::shared_ptr<Device> dev, bool is_enable) |
| { |
| int32_t status = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter, enable %d", is_enable); |
| |
| if (!cap_prof_ || !cap_prof_->isECRequired()) { |
| PAL_DBG(LOG_TAG, "No need to set EC Ref"); |
| goto exit; |
| } |
| |
| if (dev && !rm->checkECRef(dev, mDevices[0])) { |
| PAL_DBG(LOG_TAG, "No need to set EC Ref for unmatching rx device"); |
| goto exit; |
| } |
| |
| status = session->setECRef(this, dev, is_enable); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error:%d Failed to set EC Ref", status); |
| |
| exit: |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int32_t StreamSensorPCMData::setECRef(std::shared_ptr<Device> dev, bool is_enable) |
| { |
| int32_t status = 0; |
| |
| std::lock_guard<std::mutex> lck(mStreamMutex); |
| if (!use_lpi_) |
| status = setECRef_l(dev, is_enable); |
| else |
| PAL_DBG(LOG_TAG, "set EC Ref will be handled in LPI/NLPI switch"); |
| |
| return status; |
| } |