| /* |
| * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * |
| * Copyright (c) 2022 - 2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted (subject to the limitations in the |
| * disclaimer below) provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define LOG_TAG "PAL: SpeakerProtection" |
| |
| #include "SpeakerProtection.h" |
| #include "SessionAlsaUtils.h" |
| #include "kvh2xml.h" |
| #include <errno.h> |
| #include <agm/agm_api.h> |
| |
| #include<fstream> |
| #include<sstream> |
| |
| #ifndef PAL_SP_TEMP_PATH |
| #define PAL_SP_I_TEMP_PATH "/data/vendor/audio/audio_sp1.cal" |
| #define PAL_SP_II_TEMP_PATH "/data/vendor/audio/audio_sp2.cal" |
| #endif |
| |
| #define PAL_SP_XMAX_TMAX_DATA_PATH "/data/vendor/audio/spkr_xmax_tmax.txt" |
| #define PAL_SP_XMAX_TMAX_LOG_PATH "/data/vendor/audio/log_spkr_xmax_tmax.cal" |
| #define FEEDBACK_MONO_1 "-mono-1" |
| |
| #define MIN_SPKR_IDLE_SEC (60 * 30) |
| #define WAKEUP_MIN_IDLE_CHECK (1000 * 30) |
| |
| #define SPKR_RIGHT_WSA_TEMP "SpkrRight WSA Temp" |
| #define SPKR_LEFT_WSA_TEMP "SpkrLeft WSA Temp" |
| #define SPKR2_RIGHT_WSA_TEMP "Spkr2Right WSA Temp" |
| #define SPKR2_LEFT_WSA_TEMP "Spkr2Left WSA Temp" |
| |
| #define SPKR_RIGHT_WSA_DEV_NUM "SpkrRight WSA Get DevNum" |
| #define SPKR_LEFT_WSA_DEV_NUM "SpkrLeft WSA Get DevNum" |
| #define SPKR2_RIGHT_WSA_DEV_NUM "Spkr2Right WSA Get DevNum" |
| #define SPKR2_LEFT_WSA_DEV_NUM "Spkr2Left WSA Get DevNum" |
| |
| #define SPKR_RIGHT_WSA_DC_DET "SpkrRight WSA PA Disable" |
| #define SPKR_LEFT_WSA_DC_DET "SpkrLeft WSA PA Disable" |
| #define SPKR2_RIGHT_WSA_DC_DET "Spkr2Right WSA PA Disable" |
| #define SPKR2_LEFT_WSA_DC_DET "Spkr2Left WSA PA Disable" |
| |
| #define TZ_TEMP_MIN_THRESHOLD (-30) |
| #define TZ_TEMP_MAX_THRESHOLD (80) |
| |
| /*Set safe temp value to 40C*/ |
| #define SAFE_SPKR_TEMP 40 |
| #define SAFE_SPKR_TEMP_Q6 (SAFE_SPKR_TEMP * (1 << 6)) |
| |
| #define MIN_RESISTANCE_SPKR_Q24 (2 * (1 << 24)) |
| |
| #define DEFAULT_PERIOD_SIZE 256 |
| #define DEFAULT_PERIOD_COUNT 4 |
| |
| //TODO : remove this and add proper file |
| #define EVENT_ID_VI_CALIBRATION 0x0800119F |
| |
| #define NORMAL_MODE 0 |
| #define CALIBRATION_MODE 1 |
| #define FACTORY_TEST_MODE 2 |
| #define V_VALIDATION_MODE 3 |
| |
| #define CALIBRATION_STATUS_SUCCESS 4 |
| #define CALIBRATION_STATUS_FAILURE 5 |
| |
| std::thread SpeakerProtection::mCalThread; |
| std::thread SpeakerProtection::XmaxTmaxLogThread; |
| std::condition_variable SpeakerProtection::cv; |
| std::mutex SpeakerProtection::cvMutex; |
| std::mutex SpeakerProtection::calibrationMutex; |
| |
| bool SpeakerProtection::isSpkrInUse; |
| bool SpeakerProtection::calThrdCreated; |
| bool SpeakerProtection::isDynamicCalTriggered = false; |
| bool SpeakerProtection::startXmaxLogging = false; |
| struct timespec SpeakerProtection::spkrLastTimeUsed; |
| struct mixer *SpeakerProtection::virtMixer; |
| struct mixer *SpeakerProtection::hwMixer; |
| speaker_prot_cal_state SpeakerProtection::spkrCalState; |
| struct pcm * SpeakerProtection::rxPcm = NULL; |
| struct pcm * SpeakerProtection::txPcm = NULL; |
| struct pcm * SpeakerProtection::cps1Pcm = NULL; |
| struct pcm * SpeakerProtection::cps2Pcm = NULL; |
| struct param_id_sp_th_vi_calib_res_cfg_t * SpeakerProtection::callback_data; |
| int SpeakerProtection::numberOfChannels; |
| int SpeakerProtection::MaxCH; |
| uint32_t SpeakerProtection::source_miid; |
| uint32_t SpeakerProtection::vi_miid_II; |
| uint32_t SpeakerProtection::vi_miid_I; |
| struct pal_device_info SpeakerProtection::vi_device; |
| struct pal_device_info SpeakerProtection::cps_device; |
| int SpeakerProtection::calibrationCallbackStatus; |
| int SpeakerProtection::numberOfRequest; |
| bool SpeakerProtection::mDspCallbackRcvd; |
| std::shared_ptr<Device> SpeakerFeedback::obj = nullptr; |
| int SpeakerFeedback::numSpeaker; |
| |
| std::string getDefaultSpkrTempCtrl(uint8_t spkr_pos) |
| { |
| switch(spkr_pos) |
| { |
| case SPKR_LEFT: |
| return std::string(SPKR_LEFT_WSA_TEMP); |
| break; |
| case SPKR_RIGHT: |
| return std::string(SPKR_RIGHT_WSA_TEMP); |
| break; |
| case SPKR_REAR_LEFT: |
| return std::string(SPKR2_LEFT_WSA_TEMP); |
| break; |
| case SPKR_REAR_RIGHT: |
| return std::string(SPKR2_RIGHT_WSA_TEMP); |
| break; |
| default: |
| return std::string(SPKR_RIGHT_WSA_TEMP); |
| } |
| } |
| |
| std::string SpeakerProtection::getDCDetSpkrCtrl(uint8_t spkr_pos, uint32_t miid) |
| { |
| if (miid == vi_miid_I) { |
| if (spkr_pos == CHANNELS_2) |
| return std::string(SPKR_LEFT_WSA_DC_DET); |
| else |
| return std::string(SPKR_RIGHT_WSA_DC_DET); |
| } else if (miid == vi_miid_II) { |
| if (spkr_pos == CHANNELS_2) |
| return std::string(SPKR2_LEFT_WSA_DC_DET); |
| else |
| return std::string(SPKR2_RIGHT_WSA_DC_DET); |
| } |
| return std::string(SPKR_RIGHT_WSA_DC_DET); |
| } |
| |
| cps_reg_wr_values_t sp_cps_thrsh_values = { |
| .value_normal_threshold = {0x8E003049, 0x1000304A, 0x0F003472}, |
| .value_lower_threshold_1 = {0x8F003049, 0xD000304A, 0x0F003472}, |
| .value_lower_threshold_2 = {0x8F003049, 0xD000304A, 0x18003472} |
| }; |
| |
| /* Function to check if Speaker is in use or not. |
| * It returns the time as well for which speaker is not in use. |
| */ |
| bool SpeakerProtection::isSpeakerInUse(unsigned long *sec) |
| { |
| struct timespec temp; |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (!sec) { |
| PAL_ERR(LOG_TAG, "Improper argument"); |
| return false; |
| } |
| |
| if (isSpkrInUse) { |
| PAL_INFO(LOG_TAG, "Speaker in use"); |
| *sec = 0; |
| return true; |
| } else { |
| PAL_INFO(LOG_TAG, "Speaker not in use"); |
| clock_gettime(CLOCK_BOOTTIME, &temp); |
| *sec = temp.tv_sec - spkrLastTimeUsed.tv_sec; |
| } |
| |
| PAL_DBG(LOG_TAG, "Idle time %ld", *sec); |
| |
| return false; |
| } |
| |
| /* Function to set status of speaker */ |
| void SpeakerProtection::spkrProtSetSpkrStatus(bool enable) |
| { |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (enable) |
| isSpkrInUse = true; |
| else { |
| isSpkrInUse = false; |
| clock_gettime(CLOCK_BOOTTIME, &spkrLastTimeUsed); |
| PAL_INFO(LOG_TAG, "Speaker used last time %ld", spkrLastTimeUsed.tv_sec); |
| } |
| |
| PAL_DBG(LOG_TAG, "Exit"); |
| } |
| |
| /* Wait function for WAKEUP_MIN_IDLE_CHECK */ |
| void SpeakerProtection::spkrCalibrateWait() |
| { |
| std::unique_lock<std::mutex> lock(cvMutex); |
| cv.wait_for(lock, |
| std::chrono::milliseconds(WAKEUP_MIN_IDLE_CHECK)); |
| } |
| |
| // Callback from DSP for Ressistance value |
| void SpeakerProtection::handleSPCallback (uint64_t hdl __unused, uint32_t event_id, |
| void *event_data, uint32_t event_size, uint32_t miid) |
| { |
| param_id_sp_th_vi_calib_res_cfg_t *param_data = nullptr; |
| param_id_sp_vi_spkr_diag_getpkt_param_t *diag_data = nullptr; |
| std::unique_lock<std::mutex> EveLock(calibrationMutex); |
| PAL_DBG(LOG_TAG, "Got event from DSP %x for miid %d", event_id, miid); |
| |
| switch(event_id) { |
| case EVENT_ID_VI_CALIBRATION: |
| // Received callback for Calibration state |
| param_data = (param_id_sp_th_vi_calib_res_cfg_t *) event_data; |
| PAL_DBG(LOG_TAG, "Calibration state %d", param_data->state); |
| |
| if (param_data->state == CALIBRATION_STATUS_SUCCESS) { |
| PAL_DBG(LOG_TAG, "Calibration is successfull"); |
| callback_data = (param_id_sp_th_vi_calib_res_cfg_t *) calloc(1, event_size); |
| if (!callback_data) { |
| PAL_ERR(LOG_TAG, "Unable to allocate memory"); |
| } else { |
| callback_data->num_ch = param_data->num_ch; |
| callback_data->state = param_data->state; |
| source_miid = miid; |
| for (int i = 0; i < callback_data->num_ch; i++) { |
| callback_data->r0_cali_q24[i] = param_data->r0_cali_q24[i]; |
| } |
| } |
| mDspCallbackRcvd = true; |
| calibrationCallbackStatus = CALIBRATION_STATUS_SUCCESS; |
| cv.notify_all(); |
| cv.wait(EveLock); |
| } |
| else if (param_data->state == CALIBRATION_STATUS_FAILURE) { |
| PAL_DBG(LOG_TAG, "Calibration is unsuccessfull"); |
| // Restart the calibration and abort current run. |
| mDspCallbackRcvd = true; |
| calibrationCallbackStatus = CALIBRATION_STATUS_FAILURE; |
| cv.notify_all(); |
| } |
| break; |
| case EVENT_ID_SPv5_SPEAKER_DIAGNOSTICS: |
| struct mixer_ctl *ctl; |
| std::string mixer_ctl_name; |
| |
| diag_data = (param_id_sp_vi_spkr_diag_getpkt_param_t *) event_data; |
| if (diag_data->num_ch == 1) { |
| PAL_DBG(LOG_TAG, "Calibration state %d", diag_data->spkr_cond[0]); |
| if (diag_data->spkr_cond[0] == SPKR_DC) { |
| mixer_ctl_name = getDCDetSpkrCtrl(CHANNELS_1, miid); |
| ctl = mixer_get_ctl_by_name(hwMixer, mixer_ctl_name.c_str()); |
| if (!ctl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for DC : %s", mixer_ctl_name.c_str()); |
| return; |
| } |
| mixer_ctl_set_value(ctl, 0, 1); |
| mixer_ctl_set_value(ctl, 0, 0); |
| } |
| } else { |
| PAL_DBG(LOG_TAG, "Calibration state left %d, right %d", diag_data->spkr_cond[0], |
| diag_data->spkr_cond[1]); |
| if (diag_data->spkr_cond[0] == SPKR_DC) { |
| mixer_ctl_name = getDCDetSpkrCtrl(CHANNELS_2, miid); |
| ctl = mixer_get_ctl_by_name(hwMixer, mixer_ctl_name.c_str()); |
| if (!ctl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for DC : %s", mixer_ctl_name.c_str()); |
| goto spkr_right; |
| } |
| mixer_ctl_set_value(ctl, 0, 1); |
| mixer_ctl_set_value(ctl, 0, 0); |
| } |
| spkr_right: |
| if (diag_data->spkr_cond[1] == SPKR_DC) { |
| mixer_ctl_name = getDCDetSpkrCtrl(CHANNELS_1, miid); |
| ctl = mixer_get_ctl_by_name(hwMixer, mixer_ctl_name.c_str()); |
| if (!ctl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for DC : %s", mixer_ctl_name.c_str()); |
| return; |
| } |
| mixer_ctl_set_value(ctl, 0, 1); |
| mixer_ctl_set_value(ctl, 0, 0); |
| } |
| } |
| } |
| } |
| |
| /* Function to get CPS device number */ |
| int SpeakerProtection::getCpsDevNumber(std::string mixer_name) |
| { |
| struct mixer_ctl *ctl; |
| int status = 0; |
| |
| PAL_DBG(LOG_TAG, "Mixer control %s", mixer_name.c_str()); |
| PAL_DBG(LOG_TAG, "audio_hw_mixer %pK", hwMixer); |
| |
| ctl = mixer_get_ctl_by_name(hwMixer, mixer_name.c_str()); |
| if (!ctl) { |
| PAL_ERR(LOG_TAG, "Invalid mixer control: %s\n", mixer_name.c_str()); |
| status = -ENOENT; |
| return status; |
| } |
| |
| status = mixer_ctl_get_value(ctl, 0); |
| PAL_DBG(LOG_TAG, "Value for Mixer control %d", status); |
| return status; |
| } |
| |
| int SpeakerProtection::getSpeakerTemperature(int spkr_pos) |
| { |
| struct mixer_ctl *ctl; |
| std::string mixer_ctl_name; |
| int status = 0; |
| /** |
| * It is assumed that for Mono speakers only right speaker will be there. |
| * Thus we will get the Temperature just for right speaker. |
| * TODO: Get the channel from RM.xml |
| */ |
| PAL_DBG(LOG_TAG, "Enter Speaker Get Temperature %d", spkr_pos); |
| mixer_ctl_name = rm->getSpkrTempCtrl(spkr_pos); |
| if (mixer_ctl_name.empty()) { |
| PAL_DBG(LOG_TAG, "Using default mixer control"); |
| mixer_ctl_name = getDefaultSpkrTempCtrl(spkr_pos); |
| } |
| |
| PAL_DBG(LOG_TAG, "audio_mixer %pK", hwMixer); |
| |
| ctl = mixer_get_ctl_by_name(hwMixer, mixer_ctl_name.c_str()); |
| if (!ctl) { |
| PAL_ERR(LOG_TAG, "Invalid mixer control: %s\n", mixer_ctl_name.c_str()); |
| status = -EINVAL; |
| return status; |
| } |
| |
| status = mixer_ctl_get_value(ctl, 0); |
| |
| PAL_DBG(LOG_TAG, "Exiting Speaker Get Temperature %d", status); |
| |
| return status; |
| } |
| |
| void SpeakerProtection::disconnectFeandBe(std::vector<int> pcmDevIds, |
| std::string backEndName) { |
| |
| std::ostringstream disconnectCtrlName; |
| std::ostringstream disconnectCtrlNameBe; |
| struct mixer_ctl *disconnectCtrl = NULL; |
| struct mixer_ctl *beMetaDataMixerCtrl = nullptr; |
| struct agmMetaData deviceMetaData(nullptr, 0); |
| uint32_t devicePropId[] = { 0x08000010, 2, 0x2, 0x5 }; |
| std::vector <std::pair<int, int>> emptyKV; |
| int ret = 0; |
| |
| emptyKV.clear(); |
| |
| SessionAlsaUtils::getAgmMetaData(emptyKV, emptyKV, |
| (struct prop_data *)devicePropId, deviceMetaData); |
| if (!deviceMetaData.size) { |
| ret = -ENOMEM; |
| PAL_ERR(LOG_TAG, "Error: %d, Device metadata is zero", ret); |
| goto exit; |
| } |
| |
| disconnectCtrlNameBe<< backEndName << " metadata"; |
| beMetaDataMixerCtrl = mixer_get_ctl_by_name(virtMixer, disconnectCtrlNameBe.str().data()); |
| if (!beMetaDataMixerCtrl) { |
| ret = -EINVAL; |
| PAL_ERR(LOG_TAG, "Error: %d, invalid mixer control %s", ret, backEndName.c_str()); |
| goto exit; |
| } |
| |
| disconnectCtrlName << "PCM" << pcmDevIds.at(0) << " disconnect"; |
| disconnectCtrl = mixer_get_ctl_by_name(virtMixer, disconnectCtrlName.str().data()); |
| if (!disconnectCtrl) { |
| ret = -EINVAL; |
| PAL_ERR(LOG_TAG, "Error: %d, invalid mixer control: %s", ret, disconnectCtrlName.str().data()); |
| goto exit; |
| } |
| ret = mixer_ctl_set_enum_by_string(disconnectCtrl, backEndName.c_str()); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Error: %d, Mixer control %s set with %s failed", ret, |
| disconnectCtrlName.str().data(), backEndName.c_str()); |
| } |
| |
| if (deviceMetaData.size) { |
| ret = mixer_ctl_set_array(beMetaDataMixerCtrl, (void *)deviceMetaData.buf, |
| deviceMetaData.size); |
| free(deviceMetaData.buf); |
| deviceMetaData.buf = nullptr; |
| } else { |
| PAL_ERR(LOG_TAG, "Error: %d, Device Metadata not cleaned up", ret); |
| goto exit; |
| } |
| |
| exit: |
| return; |
| } |
| |
| int SpeakerProtection::spkrStartCalibration() |
| { |
| FILE *fp = NULL; |
| struct pal_device device, deviceRx; |
| struct pal_channel_info ch_info; |
| struct pal_device_info deviceRxSpkr; |
| struct pal_stream_attributes sAttr; |
| struct pcm_config config; |
| struct mixer_ctl *connectCtrl = NULL; |
| struct audio_route *audioRoute = NULL; |
| struct agm_event_reg_cfg event_cfg; |
| struct agmMetaData deviceMetaData(nullptr, 0); |
| struct mixer_ctl *beMetaDataMixerCtrl = nullptr; |
| int ret = 0, status = 0, dir = 0, i = 0, flags = 0, payload_size = 0; |
| int eventCh = 0,SpkrTempIndex =0; |
| uint32_t miid = 0; |
| uint32_t tagid; |
| char mSndDeviceName_rx[128] = {0}; |
| char mSndDeviceName_vi[128] = {0}; |
| uint8_t* payload = NULL; |
| size_t payloadSize = 0; |
| uint32_t devicePropId[] = {0x08000010, 1, 0x2}; |
| bool isTxStarted = false, isRxStarted = false; |
| bool isTxFeandBeConnected = false, isRxFeandBeConnected = false; |
| std::string backEndNameTx, backEndNameRx; |
| std::vector <std::pair<int, int>> keyVector, calVector; |
| std::vector<int> pcmDevIdsRx, pcmDevIdsTx; |
| std::shared_ptr<ResourceManager> rm; |
| std::ostringstream connectCtrlName; |
| std::ostringstream connectCtrlNameRx; |
| std::ostringstream connectCtrlNameBe; |
| std::ostringstream connectCtrlNameBeVI; |
| param_id_sp_vi_op_mode_cfg_t modeConfg; |
| param_id_sp_vi_channel_map_cfg_t viChannelMapConfg; |
| param_id_sp_op_mode_t spModeConfg; |
| param_id_sp_ex_vi_mode_cfg_t viExModeConfg; |
| session_callback sessionCb; |
| |
| std::unique_lock<std::mutex> calLock(calibrationMutex); |
| |
| memset(&device, 0, sizeof(device)); |
| memset(&deviceRx, 0, sizeof(deviceRx)); |
| memset(&sAttr, 0, sizeof(sAttr)); |
| memset(&config, 0, sizeof(config)); |
| memset(&modeConfg, 0, sizeof(modeConfg)); |
| memset(&viChannelMapConfg, 0, sizeof(viChannelMapConfg)); |
| memset(&spModeConfg, 0, sizeof(spModeConfg)); |
| memset(&viExModeConfg, 0, sizeof(viExModeConfg)); |
| |
| sessionCb = handleSPCallback; |
| PayloadBuilder* builder = new PayloadBuilder(); |
| |
| keyVector.clear(); |
| calVector.clear(); |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (customPayloadSize) { |
| free(customPayload); |
| customPayloadSize = 0; |
| customPayload = NULL; |
| } |
| |
| rm = ResourceManager::getInstance(); |
| if (!rm) { |
| PAL_ERR(LOG_TAG, "Error: %d Failed to get resource manager instance", -EINVAL); |
| goto exit; |
| } |
| |
| rm->getDeviceInfo(PAL_DEVICE_IN_VI_FEEDBACK, PAL_STREAM_PROXY, "", &vi_device); |
| |
| // Configure device attribute |
| rm->getChannelMap(&(ch_info.ch_map[0]), vi_device.channels); |
| switch (vi_device.channels) { |
| case 1 : |
| ch_info.channels = CHANNELS_1; |
| break; |
| case 2 : |
| ch_info.channels = CHANNELS_2; |
| break; |
| case 4 : |
| ch_info.channels = CHANNELS_4; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported channel. Set default as 2"); |
| ch_info.channels = CHANNELS_2; |
| break; |
| } |
| |
| device.config.ch_info = ch_info; |
| device.config.sample_rate = vi_device.samplerate; |
| device.config.bit_width = vi_device.bit_width; |
| device.config.aud_fmt_id = rm->getAudioFmt(vi_device.bit_width); |
| |
| // Setup TX path |
| ret = rm->getAudioRoute(&audioRoute); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route name status %d", ret); |
| goto exit; |
| } |
| |
| device.id = PAL_DEVICE_IN_VI_FEEDBACK; |
| strlcpy(mSndDeviceName_vi, vi_device.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| PAL_DBG(LOG_TAG, "got the audio_route name %s", mSndDeviceName_vi); |
| |
| rm->getBackendName(device.id, backEndNameTx); |
| if (!strlen(backEndNameTx.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain tx backend name for %d", device.id); |
| goto exit; |
| } |
| |
| ret = PayloadBuilder::getDeviceKV(device.id, keyVector); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to obtain device KV for %d", device.id); |
| goto exit; |
| } |
| |
| // Enable VI module |
| if (numberOfChannels == CHANNELS_4) { |
| switch(numberOfChannels) { |
| case 1 : |
| // TODO: check it from RM.xml for left or right configuration |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, RIGHT_SPKR_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_1)); |
| break; |
| case 2 : |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_2)); |
| break; |
| case 4 : |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_4)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto exit; |
| } |
| } else if (numberOfChannels <= CHANNELS_2) { |
| switch(numberOfChannels) { |
| case 1: |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, RIGHT_SPKR)); |
| break; |
| case 2: |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto exit; |
| } |
| } |
| |
| SessionAlsaUtils::getAgmMetaData(keyVector, calVector, |
| (struct prop_data *)devicePropId, deviceMetaData); |
| if (!deviceMetaData.size) { |
| PAL_ERR(LOG_TAG, "VI device metadata is zero"); |
| ret = -ENOMEM; |
| goto exit; |
| } |
| |
| connectCtrlNameBeVI<< backEndNameTx << " metadata"; |
| beMetaDataMixerCtrl = mixer_get_ctl_by_name(virtMixer, connectCtrlNameBeVI.str().data()); |
| if (!beMetaDataMixerCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for VI : %s", backEndNameTx.c_str()); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| if (deviceMetaData.size) { |
| ret = mixer_ctl_set_array(beMetaDataMixerCtrl, (void *)deviceMetaData.buf, |
| deviceMetaData.size); |
| free(deviceMetaData.buf); |
| deviceMetaData.buf = nullptr; |
| } else { |
| PAL_ERR(LOG_TAG, "Device Metadata not set for TX path"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = SessionAlsaUtils::setDeviceMediaConfig(rm, backEndNameTx, &device); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "setDeviceMediaConfig for feedback device failed"); |
| goto exit; |
| } |
| |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| dir = TX_HOSTLESS; |
| pcmDevIdsTx = rm->allocateFrontEndIds(sAttr, dir); |
| if (pcmDevIdsTx.size() == 0) { |
| PAL_ERR(LOG_TAG, "allocateFrontEndIds failed"); |
| ret = -ENOSYS; |
| goto exit; |
| } |
| |
| connectCtrlName << "PCM" << pcmDevIdsTx.at(0) << " connect"; |
| connectCtrl = mixer_get_ctl_by_name(virtMixer, connectCtrlName.str().data()); |
| if (!connectCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control: %s", connectCtrlName.str().data()); |
| goto free_fe; |
| } |
| ret = mixer_ctl_set_enum_by_string(connectCtrl, backEndNameTx.c_str()); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Mixer control %s set with %s failed: %d", |
| connectCtrlName.str().data(), backEndNameTx.c_str(), ret); |
| goto free_fe; |
| } |
| |
| isTxFeandBeConnected = true; |
| |
| config.rate = vi_device.samplerate; |
| switch (vi_device.bit_width) { |
| case 32 : |
| config.format = PCM_FORMAT_S32_LE; |
| break; |
| case 24 : |
| config.format = PCM_FORMAT_S24_LE; |
| break; |
| case 16: |
| config.format = PCM_FORMAT_S16_LE; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported bit width. Set default as 16"); |
| config.format = PCM_FORMAT_S16_LE; |
| break; |
| } |
| |
| switch (vi_device.channels) { |
| case 1 : |
| config.channels = CHANNELS_1; |
| break; |
| case 2 : |
| config.channels = CHANNELS_2; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported channel. Set default as 2"); |
| config.channels = CHANNELS_2; |
| break; |
| } |
| config.period_size = DEFAULT_PERIOD_SIZE; |
| config.period_count = DEFAULT_PERIOD_COUNT; |
| config.start_threshold = 0; |
| config.stop_threshold = INT_MAX; |
| config.silence_threshold = 0; |
| |
| flags = PCM_IN; |
| |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> 2) { |
| // Setting the mode of VI module |
| |
| if (numberOfChannels == CHANNELS_4) |
| modeConfg.num_speakers = MaxCH; |
| else { |
| modeConfg.num_speakers = numberOfChannels; |
| } |
| |
| modeConfg.th_operation_mode = CALIBRATION_MODE; |
| if (minIdleTime > 0 && minIdleTime < MIN_SPKR_IDLE_SEC) { |
| // Quick calibration set |
| modeConfg.th_quick_calib_flag = 1; |
| } |
| else |
| modeConfg.th_quick_calib_flag = 0; |
| |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| |
| ret = SessionAlsaUtils::getModuleInstanceId(virtMixer, pcmDevIdsTx.at(0), |
| backEndNameTx.c_str(), |
| tagid, &miid); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto free_fe; |
| } |
| |
| if (ch == CHANNELS_4) |
| vi_miid_II = miid; |
| else |
| vi_miid_I = miid; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_OP_MODE_CFG,(void *)&modeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG,"updateCustomPayload Failed for VI_OP_MODE_CFG\n"); |
| // Fatal error as calibration mode will not be set |
| goto free_fe; |
| } |
| } |
| |
| // Setting Channel Map configuration for VI module |
| // TODO: Move this to ACDB |
| if (numberOfChannels == CHANNELS_4) |
| viChannelMapConfg.num_ch = MaxCH * 2; |
| else |
| viChannelMapConfg.num_ch = numberOfChannels * 2; |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_CHANNEL_MAP_CFG,(void *)&viChannelMapConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for CHANNEL_MAP_CFG\n"); |
| // Not a fatal error |
| ret = 0; |
| } |
| } |
| |
| // Setting Excursion mode |
| viExModeConfg.ex_FTM_mode_enable_flag = 0; // Normal Mode |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_EX_VI_MODE_CFG,(void *)&viExModeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for EX_VI_MODE_CFG\n"); |
| // Not a fatal error |
| ret = 0; |
| } |
| } |
| } |
| |
| // Setting the values for VI module |
| if (customPayloadSize) { |
| ret = SessionAlsaUtils::setDeviceCustomPayload(rm, backEndNameTx, |
| customPayload, customPayloadSize); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Unable to set custom param for mode"); |
| goto free_fe; |
| } |
| } |
| |
| |
| txPcm = pcm_open(rm->getVirtualSndCard(), pcmDevIdsTx.at(0), flags, &config); |
| if (!txPcm) { |
| PAL_ERR(LOG_TAG, "txPcm open failed"); |
| goto free_fe; |
| } |
| |
| if (!pcm_is_ready(txPcm)) { |
| PAL_ERR(LOG_TAG, "txPcm open not ready"); |
| goto err_pcm_open; |
| } |
| |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| //Register for VI module callback |
| |
| PAL_DBG(LOG_TAG, "registering event for VI module"); |
| payload_size = sizeof(struct agm_event_reg_cfg); |
| |
| event_cfg.event_id = EVENT_ID_VI_CALIBRATION; |
| event_cfg.event_config_payload_size = 0; |
| event_cfg.is_register = 1; |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| |
| ret = SessionAlsaUtils::registerMixerEvent(virtMixer, pcmDevIdsTx.at(0), |
| backEndNameTx.c_str(), tagid, (void *)&event_cfg, |
| payload_size); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Unable to register event to DSP"); |
| // Fatal Error. Calibration Won't work |
| goto err_pcm_open; |
| } |
| } |
| |
| // Register to mixtureControlEvents and wait for the R0T0 values |
| ret = rm->registerMixerEventCallback(pcmDevIdsTx, sessionCb, (uint64_t)this, true); |
| if (ret != 0) { |
| PAL_ERR(LOG_TAG, "Failed to register callback to rm"); |
| // Fatal Error. Calibration Won't work |
| goto err_pcm_open; |
| } |
| |
| enableDevice(audioRoute, mSndDeviceName_vi); |
| |
| PAL_DBG(LOG_TAG, "pcm start for TX path"); |
| if (pcm_start(txPcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for TX path"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| isTxStarted = true; |
| |
| // Setup RX path |
| deviceRx.id = PAL_DEVICE_OUT_SPEAKER; |
| rm->getDeviceInfo(deviceRx.id, PAL_STREAM_PROXY, "", &deviceRxSpkr); |
| strlcpy(mSndDeviceName_rx, deviceRxSpkr.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| rm->getChannelMap(&(deviceRx.config.ch_info.ch_map[0]), numberOfChannels); |
| |
| switch (numberOfChannels) { |
| case 1 : |
| deviceRx.config.ch_info.channels = CHANNELS_1; |
| break; |
| case 2 : |
| deviceRx.config.ch_info.channels = CHANNELS_2; |
| break; |
| case 4 : |
| deviceRx.config.ch_info.channels = CHANNELS_4; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported channel. Set default as 2"); |
| deviceRx.config.ch_info.channels = CHANNELS_2; |
| break; |
| } |
| // TODO: Fetch these data from rm.xml |
| deviceRx.config.sample_rate = SAMPLINGRATE_48K; |
| deviceRx.config.bit_width = BITWIDTH_16; |
| deviceRx.config.aud_fmt_id = PAL_AUDIO_FMT_PCM_S16_LE; |
| |
| rm->getBackendName(deviceRx.id, backEndNameRx); |
| if (!strlen(backEndNameRx.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain rx backend name for %d", deviceRx.id); |
| goto err_pcm_open; |
| } |
| |
| keyVector.clear(); |
| calVector.clear(); |
| |
| PayloadBuilder::getDeviceKV(deviceRx.id, keyVector); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to obtain device KV for %d", deviceRx.id); |
| goto err_pcm_open; |
| } |
| |
| // Enable the SP module |
| if (numberOfChannels == CHANNELS_4) { |
| switch (numberOfChannels) { |
| case 1 : |
| // TODO: Fetch the configuration from RM.xml |
| calVector.push_back(std::make_pair(SPK_PRO_DEV_MAP, RIGHT_MONO_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_1)); |
| break; |
| case 2 : |
| calVector.push_back(std::make_pair(SPK_PRO_DEV_MAP, LEFT_RIGHT_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_2)); |
| break; |
| case 4 : |
| calVector.push_back(std::make_pair(SPK_PRO_DEV_MAP, LEFT_RIGHT)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_4)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channels for speaker"); |
| goto err_pcm_open; |
| } |
| } else if (numberOfChannels <= CHANNELS_2) { |
| switch(numberOfChannels) { |
| case 1: |
| calVector.push_back(std::make_pair(SPK_PRO_DEV_MAP, RIGHT_MONO)); |
| break; |
| case 2: |
| calVector.push_back(std::make_pair(SPK_PRO_DEV_MAP, LEFT_RIGHT)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto err_pcm_open; |
| } |
| } |
| |
| SessionAlsaUtils::getAgmMetaData(keyVector, calVector, |
| (struct prop_data *)devicePropId, deviceMetaData); |
| if (!deviceMetaData.size) { |
| PAL_ERR(LOG_TAG, "device metadata is zero"); |
| ret = -ENOMEM; |
| goto err_pcm_open; |
| } |
| |
| connectCtrlNameBe<< backEndNameRx << " metadata"; |
| |
| beMetaDataMixerCtrl = mixer_get_ctl_by_name(virtMixer, connectCtrlNameBe.str().data()); |
| if (!beMetaDataMixerCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control: %s", backEndNameRx.c_str()); |
| ret = -EINVAL; |
| goto err_pcm_open; |
| } |
| |
| if (deviceMetaData.size) { |
| ret = mixer_ctl_set_array(beMetaDataMixerCtrl, (void *)deviceMetaData.buf, |
| deviceMetaData.size); |
| free(deviceMetaData.buf); |
| deviceMetaData.buf = nullptr; |
| } |
| else { |
| PAL_ERR(LOG_TAG, "Device Metadata not set for RX path"); |
| ret = -EINVAL; |
| goto err_pcm_open; |
| } |
| |
| ret = SessionAlsaUtils::setDeviceMediaConfig(rm, backEndNameRx, &deviceRx); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "setDeviceMediaConfig for speaker failed"); |
| goto err_pcm_open; |
| } |
| |
| /* Retrieve Hostless PCM device id */ |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| dir = RX_HOSTLESS; |
| pcmDevIdsRx = rm->allocateFrontEndIds(sAttr, dir); |
| if (pcmDevIdsRx.size() == 0) { |
| PAL_ERR(LOG_TAG, "allocateFrontEndIds failed"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| |
| connectCtrlNameRx << "PCM" << pcmDevIdsRx.at(0) << " connect"; |
| connectCtrl = mixer_get_ctl_by_name(virtMixer, connectCtrlNameRx.str().data()); |
| if (!connectCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control: %s", connectCtrlNameRx.str().data()); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| ret = mixer_ctl_set_enum_by_string(connectCtrl, backEndNameRx.c_str()); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Mixer control %s set with %s failed: %d", |
| connectCtrlNameRx.str().data(), backEndNameRx.c_str(), ret); |
| goto err_pcm_open; |
| } |
| isRxFeandBeConnected = true; |
| |
| config.rate = SAMPLINGRATE_48K; |
| config.format = PCM_FORMAT_S16_LE; |
| if (numberOfChannels > 1) |
| config.channels = CHANNELS_2; |
| else |
| config.channels = CHANNELS_1; |
| config.period_size = DEFAULT_PERIOD_SIZE; |
| config.period_count = DEFAULT_PERIOD_COUNT; |
| config.start_threshold = 0; |
| config.stop_threshold = INT_MAX; |
| config.silence_threshold = 0; |
| |
| flags = PCM_OUT; |
| |
| // Set the operation mode for SP module |
| spModeConfg.operation_mode = CALIBRATION_MODE; |
| if (customPayloadSize) { |
| free(customPayload); |
| customPayloadSize = 0; |
| customPayload = NULL; |
| } |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| if (ch == CHANNELS_4) |
| tagid = MODULE_SP2; |
| else |
| tagid = MODULE_SP; |
| |
| ret = SessionAlsaUtils::getModuleInstanceId(virtMixer, pcmDevIdsRx.at(0), |
| backEndNameRx.c_str(), |
| tagid, &miid); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get miid info %x, status = %d", MODULE_SP, ret); |
| goto err_pcm_open; |
| } |
| PAL_DBG(LOG_TAG, "set sp mode to %d for miid = %x", spModeConfg.operation_mode,miid); |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_OP_MODE,(void *)&spModeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| // Fatal error as SP module will not run in Calibration mode |
| goto err_pcm_open; |
| } |
| } |
| } |
| |
| // Setting the values for SP module |
| if (customPayloadSize) { |
| ret = SessionAlsaUtils::setDeviceCustomPayload(rm, backEndNameRx, |
| customPayload, customPayloadSize); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Unable to set custom param for SP mode"); |
| free(customPayload); |
| customPayloadSize = 0; |
| customPayload = NULL; |
| goto err_pcm_open; |
| } |
| } |
| |
| rxPcm = pcm_open(rm->getVirtualSndCard(), pcmDevIdsRx.at(0), flags, &config); |
| if (!rxPcm) { |
| PAL_ERR(LOG_TAG, "pcm open failed for RX path"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| |
| if (!pcm_is_ready(rxPcm)) { |
| PAL_ERR(LOG_TAG, "pcm open not ready for RX path"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| |
| |
| enableDevice(audioRoute, mSndDeviceName_rx); |
| PAL_DBG(LOG_TAG, "pcm start for RX path"); |
| if (pcm_start(rxPcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for RX path"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| isRxStarted = true; |
| |
| spkrCalState = SPKR_CALIB_IN_PROGRESS; |
| |
| PAL_DBG(LOG_TAG, "Waiting for the event from DSP or PAL"); |
| |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| // TODO: Make this to wait in While loop |
| cv.wait(calLock); |
| |
| if (numberOfChannels == CHANNELS_4) |
| eventCh = MaxCH; |
| else |
| eventCh = numberOfChannels; |
| |
| // Store the R0T0 values |
| if (mDspCallbackRcvd) { |
| if (calibrationCallbackStatus == CALIBRATION_STATUS_SUCCESS) { |
| if (vi_miid_II == source_miid) { |
| PAL_DBG(LOG_TAG, " opening this path %s",PAL_SP_II_TEMP_PATH); |
| fp = fopen(PAL_SP_II_TEMP_PATH, "w+"); |
| } |
| else if (vi_miid_I == source_miid) { |
| PAL_DBG(LOG_TAG, " opening this path %s",PAL_SP_I_TEMP_PATH); |
| fp = fopen(PAL_SP_I_TEMP_PATH, "w+"); |
| } |
| if (!fp) { |
| PAL_ERR(LOG_TAG, "Unable to open file for write %s",strerror(errno)); |
| |
| } else { |
| PAL_DBG(LOG_TAG, "Write the R0T0 value to file"); |
| for (i = 0; i < eventCh; i++) { |
| fwrite(&callback_data->r0_cali_q24[i], |
| sizeof(callback_data->r0_cali_q24[i]), 1, fp); |
| fwrite(&spkerTempList[i + SpkrTempIndex], sizeof(int16_t), 1, fp); |
| } |
| spkrCalState = SPKR_CALIBRATED; |
| free(callback_data); |
| fclose(fp); |
| } |
| SpkrTempIndex = 2; |
| } |
| else if (calibrationCallbackStatus == CALIBRATION_STATUS_FAILURE) { |
| PAL_DBG(LOG_TAG, "Calibration is not done"); |
| spkrCalState = SPKR_NOT_CALIBRATED; |
| // reset the timer for retry |
| clock_gettime(CLOCK_BOOTTIME, &spkrLastTimeUsed); |
| } |
| } |
| cv.notify_all(); |
| } |
| |
| err_pcm_open : |
| if (txPcm) { |
| event_cfg.is_register = 0; |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| //Register for VI module callback |
| //update tagid based on channels. |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| |
| status = SessionAlsaUtils::registerMixerEvent(virtMixer, pcmDevIdsTx.at(0), |
| backEndNameTx.c_str(), tagid, (void *)&event_cfg, |
| payload_size); |
| if (status) { |
| PAL_ERR(LOG_TAG, "Unable to deregister event to DSP"); |
| } |
| } |
| status = rm->registerMixerEventCallback (pcmDevIdsTx, sessionCb, (uint64_t)this, false); |
| if (status) { |
| PAL_ERR(LOG_TAG, "Failed to deregister callback to rm"); |
| } |
| if (isTxStarted) |
| pcm_stop(txPcm); |
| |
| pcm_close(txPcm); |
| disableDevice(audioRoute, mSndDeviceName_vi); |
| |
| txPcm = NULL; |
| } |
| |
| if (rxPcm) { |
| if (isRxStarted) |
| pcm_stop(rxPcm); |
| pcm_close(rxPcm); |
| disableDevice(audioRoute, mSndDeviceName_rx); |
| rxPcm = NULL; |
| } |
| |
| free_fe: |
| if (pcmDevIdsRx.size() != 0) { |
| if (isRxFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdsRx, backEndNameRx); |
| } |
| rm->freeFrontEndIds(pcmDevIdsRx, sAttr, RX_HOSTLESS); |
| } |
| |
| if (pcmDevIdsTx.size() != 0) { |
| if (isTxFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdsTx, backEndNameTx); |
| } |
| rm->freeFrontEndIds(pcmDevIdsTx, sAttr, TX_HOSTLESS); |
| } |
| pcmDevIdsRx.clear(); |
| pcmDevIdsTx.clear(); |
| |
| exit: |
| |
| if (!mDspCallbackRcvd) { |
| // the lock is unlocked due to processing mode. It will be waiting |
| // for the unlock. So notify it. |
| PAL_DBG(LOG_TAG, "Unlocked due to processing mode"); |
| spkrCalState = SPKR_NOT_CALIBRATED; |
| clock_gettime(CLOCK_BOOTTIME, &spkrLastTimeUsed); |
| } |
| cv.notify_all(); |
| |
| if (ret != 0) { |
| // Error happened. Reset timer |
| clock_gettime(CLOCK_BOOTTIME, &spkrLastTimeUsed); |
| } |
| |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| PAL_DBG(LOG_TAG, "Exiting"); |
| return ret; |
| } |
| |
| /** |
| * This function sets the temperature of each speakers. |
| * Currently values are supported like: |
| * spkerTempList[0] - Right Speaker Temperature |
| * spkerTempList[1] - Left Speaker Temperature |
| * spkerTempList[2] - Rightbottom Speaker Temperature |
| * spkerTempList[3] - Leftbottom Speaker Temperature |
| */ |
| void SpeakerProtection::getSpeakerTemperatureList() |
| { |
| int i = 0; |
| int value; |
| PAL_DBG(LOG_TAG, "Enter Speaker Get Temperature List"); |
| |
| for(i = 0; i < numberOfChannels; i++) { |
| value = getSpeakerTemperature(i); |
| PAL_DBG(LOG_TAG, "Temperature %d ", value); |
| spkerTempList[i] = value; |
| } |
| PAL_DBG(LOG_TAG, "Exit Speaker Get Temperature List"); |
| } |
| |
| void SpeakerProtection::spkrCalibrationThread() |
| { |
| unsigned long sec = 0; |
| bool proceed = false; |
| int i; |
| |
| while (!threadExit) { |
| PAL_DBG(LOG_TAG, "Inside calibration while loop"); |
| proceed = false; |
| if (isSpeakerInUse(&sec)) { |
| PAL_DBG(LOG_TAG, "Speaker in use. Wait for proper time"); |
| spkrCalibrateWait(); |
| PAL_DBG(LOG_TAG, "Waiting done"); |
| continue; |
| } |
| else { |
| PAL_DBG(LOG_TAG, "Speaker not in use"); |
| if (isDynamicCalTriggered) { |
| PAL_DBG(LOG_TAG, "Dynamic Calibration triggered"); |
| } |
| else if (sec < minIdleTime) { |
| PAL_DBG(LOG_TAG, "Speaker not idle for minimum time. %lu", sec); |
| spkrCalibrateWait(); |
| PAL_DBG(LOG_TAG, "Waited for speaker to be idle for min time"); |
| continue; |
| } |
| proceed = true; |
| } |
| |
| if (proceed) { |
| PAL_DBG(LOG_TAG, "Getting temperature of speakers"); |
| getSpeakerTemperatureList(); |
| |
| for (i = 0; i < numberOfChannels; i++) { |
| if ((spkerTempList[i] != -EINVAL) && |
| (spkerTempList[i] < TZ_TEMP_MIN_THRESHOLD || |
| spkerTempList[i] > TZ_TEMP_MAX_THRESHOLD)) { |
| PAL_ERR(LOG_TAG, "Temperature out of range. Retry"); |
| spkrCalibrateWait(); |
| continue; |
| } |
| } |
| for (i = 0; i < numberOfChannels; i++) { |
| // Converting to Q6 format |
| spkerTempList[i] = (spkerTempList[i]*(1<<6)); |
| } |
| } |
| else { |
| continue; |
| } |
| |
| // Check whether speaker was in use in the meantime when temperature |
| // was being read. |
| proceed = false; |
| if (isSpeakerInUse(&sec)) { |
| PAL_DBG(LOG_TAG, "Speaker in use. Wait for proper time"); |
| spkrCalibrateWait(); |
| PAL_DBG(LOG_TAG, "Waiting done"); |
| continue; |
| } |
| else { |
| PAL_DBG(LOG_TAG, "Speaker not in use"); |
| if (isDynamicCalTriggered) { |
| PAL_DBG(LOG_TAG, "Dynamic calibration triggered"); |
| } |
| else if (sec < minIdleTime) { |
| PAL_DBG(LOG_TAG, "Speaker not idle for minimum time. %lu", sec); |
| spkrCalibrateWait(); |
| PAL_DBG(LOG_TAG, "Waited for speaker to be idle for min time"); |
| continue; |
| } |
| proceed = true; |
| } |
| |
| if (proceed) { |
| // Start calibrating the speakers. |
| PAL_DBG(LOG_TAG, "Speaker not in use, start calibration"); |
| spkrStartCalibration(); |
| if (spkrCalState == SPKR_CALIBRATED) { |
| threadExit = true; |
| } |
| } |
| else { |
| continue; |
| } |
| } |
| isDynamicCalTriggered = false; |
| calThrdCreated = false; |
| PAL_DBG(LOG_TAG, "Calibration done, exiting the thread"); |
| } |
| |
| SpeakerProtection::SpeakerProtection(struct pal_device *device, |
| std::shared_ptr<ResourceManager> Rm):Device(device, Rm) |
| { |
| int status = 0; |
| struct pal_device_info devinfo = {}; |
| FILE *fp = NULL; |
| |
| spkerTempList = NULL; |
| |
| if (ResourceManager::spQuickCalTime > 0 && |
| ResourceManager::spQuickCalTime < MIN_SPKR_IDLE_SEC) |
| minIdleTime = ResourceManager::spQuickCalTime; |
| else |
| minIdleTime = MIN_SPKR_IDLE_SEC; |
| |
| rm = Rm; |
| |
| memset(&mDeviceAttr, 0, sizeof(struct pal_device)); |
| memcpy(&mDeviceAttr, device, sizeof(struct pal_device)); |
| |
| threadExit = false; |
| calThrdCreated = false; |
| |
| triggerCal = false; |
| spkrCalState = SPKR_NOT_CALIBRATED; |
| spkrProcessingState = SPKR_PROCESSING_IN_IDLE; |
| |
| isSpkrInUse = false; |
| |
| calibrationCallbackStatus = 0; |
| mDspCallbackRcvd = false; |
| |
| rm->getDeviceInfo(device->id, PAL_STREAM_PROXY, "", &devinfo); |
| numberOfChannels = devinfo.channels; |
| PAL_DBG(LOG_TAG, "Number of Channels %d", numberOfChannels); |
| |
| if (numberOfChannels == CHANNELS_4) |
| MaxCH = CHANNELS_2; |
| else |
| MaxCH = numberOfChannels; |
| |
| rm->getDeviceInfo(PAL_DEVICE_IN_VI_FEEDBACK, PAL_STREAM_PROXY, "", &vi_device); |
| PAL_DBG(LOG_TAG, "Number of Channels for VI path is %d", vi_device.channels); |
| |
| rm->getDeviceInfo(PAL_DEVICE_IN_CPS_FEEDBACK, PAL_STREAM_PROXY, "", &cps_device); |
| PAL_DBG(LOG_TAG, "Number of Channels for CPS path is %d", cps_device.channels); |
| |
| spkerTempList = new int [numberOfChannels]; |
| // Get current time |
| clock_gettime(CLOCK_BOOTTIME, &spkrLastTimeUsed); |
| |
| // Getting mixture controls from Resource Manager |
| status = rm->getVirtualAudioMixer(&virtMixer); |
| if (status) { |
| PAL_ERR(LOG_TAG,"virt mixer error %d", status); |
| } |
| status = rm->getHwAudioMixer(&hwMixer); |
| if (status) { |
| PAL_ERR(LOG_TAG,"hw mixer error %d", status); |
| } |
| |
| if (device->id == PAL_DEVICE_OUT_HANDSET) { |
| vi_device.channels = 1; |
| cps_device.channels = 1; |
| PAL_DBG(LOG_TAG, "Device id: %d vi_device.channels: %d cps_device.channels: %d", |
| device->id, vi_device.channels, cps_device.channels); |
| goto exit; |
| } |
| |
| fp = fopen(PAL_SP_I_TEMP_PATH, "rb"); |
| if (fp) { |
| PAL_DBG(LOG_TAG, "Cal File exists. Reading from it"); |
| spkrCalState = SPKR_CALIBRATED; |
| } |
| else { |
| PAL_DBG(LOG_TAG, "Calibration Not done"); |
| mCalThread = std::thread(&SpeakerProtection::spkrCalibrationThread, |
| this); |
| calThrdCreated = true; |
| } |
| exit: |
| PAL_DBG(LOG_TAG, "exit. calThrdCreated :%d", calThrdCreated); |
| } |
| |
| SpeakerProtection::~SpeakerProtection() |
| { |
| if (spkerTempList) |
| delete[] spkerTempList; |
| |
| if (customPayload) |
| free(customPayload); |
| |
| customPayload = NULL; |
| customPayloadSize = 0; |
| } |
| |
| int32_t SpeakerProtection::getSpkrXmaxTmaxData() |
| { |
| const char* getParamControl = "getParam"; |
| char* pcmDeviceName = NULL; |
| uint8_t* payload = NULL; |
| int ret = 0; |
| uint32_t miid = 0, num_ch = 0, stringLen =0; |
| int32_t pcmID = -EINVAL; |
| size_t payloadSize = 0, bytesWritten = -1; |
| struct mixer_ctl* ctl; |
| FILE* fp; |
| std::ostringstream cntrlName; |
| std::string backendName; |
| param_id_sp_tmax_xmax_logging_t sp_xmax_tmax; |
| param_id_sp_tmax_xmax_logging_t* sp_xmax_tmax_value; |
| PayloadBuilder* builder = new PayloadBuilder(); |
| |
| /* Frontend ID information for RX Session presents at SessionAlsaPCM/Compress |
| * In Kalama, there is no getter func for pcmDevIds (private attribute) |
| * Assuming there will be only one session. So hardcoded here*/ |
| |
| pcmID = 125; |
| pcmDeviceName = rm->getDeviceNameFromID(pcmID); |
| |
| if (pcmDeviceName == NULL) { |
| /*To check for PAL_STREAM_COMPRESSED*/ |
| pcmID = 105; |
| pcmDeviceName = rm->getDeviceNameFromID(pcmID); |
| } |
| |
| if (pcmDeviceName) { |
| cntrlName << pcmDeviceName << " " << getParamControl; |
| } |
| else { |
| PAL_ERR(LOG_TAG, "Error: %d Unable to get Device name\n", -EINVAL); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ctl = mixer_get_ctl_by_name(virtMixer, cntrlName.str().data()); |
| |
| if (!ctl) { |
| ret = -ENOENT; |
| PAL_ERR(LOG_TAG, "Error: %d Invalid mixer control: %s\n", ret, cntrlName.str().data()); |
| goto exit; |
| } |
| |
| rm->getBackendName(PAL_DEVICE_OUT_SPEAKER, backendName); |
| |
| if (!strlen(backendName.c_str())) { |
| ret = -ENOENT; |
| PAL_ERR(LOG_TAG, "Error: %d Failed to obtain RX backend name", ret); |
| goto exit; |
| } |
| |
| ret = SessionAlsaUtils::getModuleInstanceId(virtMixer, pcmID, |
| backendName.c_str(), MODULE_SP, &miid); |
| |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Error: %d Failed to get tag info %x", ret, MODULE_SP); |
| goto exit; |
| } |
| |
| sp_xmax_tmax.num_ch = vi_device.channels; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_TMAX_XMAX_LOGGING, (void *) &sp_xmax_tmax); |
| |
| if (!payloadSize) { |
| PAL_ERR(LOG_TAG, "Payload memory allocation failed"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = mixer_ctl_set_array(ctl, payload, payloadSize); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Set failed with return value = %d", ret); |
| goto exit; |
| } |
| |
| memset(payload, 0, payloadSize); |
| |
| ret = mixer_ctl_get_array(ctl, payload, payloadSize); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Get failed with return value = %d", ret); |
| goto exit; |
| } |
| else { |
| sp_xmax_tmax_value = (param_id_sp_tmax_xmax_logging_t*)(payload + |
| sizeof(struct apm_module_param_data_t)); |
| fp = fopen(PAL_SP_XMAX_TMAX_DATA_PATH, "a"); |
| |
| if (!fp) { |
| PAL_ERR(LOG_TAG, "Unable to open file for write"); |
| ret = -EBADF; |
| goto exit; |
| } |
| else { |
| num_ch = sp_xmax_tmax_value->num_ch; |
| auto currentTime = std::chrono::system_clock::now(); |
| std::time_t currentTimeT = std::chrono::system_clock::to_time_t(currentTime); |
| const char* currentTimeStr = std::ctime(¤tTimeT); |
| stringLen = std::strlen(currentTimeStr); |
| |
| PAL_DBG(LOG_TAG, "Current Timestamp : %s and size of string : %d", currentTimeStr, stringLen); |
| bytesWritten = fprintf(fp, "%s ", currentTimeStr); |
| |
| if (bytesWritten < 0) { |
| PAL_ERR(LOG_TAG, "Error in writing to file"); |
| fclose(fp); |
| ret = -EBADF; |
| goto exit; |
| } |
| |
| for (int i = 0; i < num_ch; i++) { |
| PAL_DBG(LOG_TAG, "Channel: %d, Max Excursion Value =%d",i, sp_xmax_tmax_value->tmax_xmax_params[i].max_excursion); |
| bytesWritten = fprintf(fp, "Ch: %d <Xmax> : %3.4f", i, (float)sp_xmax_tmax_value->tmax_xmax_params[i].max_excursion / (1 << 27)); |
| |
| if (bytesWritten < 0) { |
| PAL_ERR(LOG_TAG, "Error in writing to file"); |
| fclose(fp); |
| ret = -EBADF; |
| goto exit; |
| } |
| |
| PAL_DBG(LOG_TAG, "Channel: %d, Max Temperature Value =%d",i, sp_xmax_tmax_value->tmax_xmax_params[i].max_temperature); |
| bytesWritten = fprintf(fp, " <Tmax> : %3.4f ", (float)sp_xmax_tmax_value->tmax_xmax_params[i].max_temperature / (1 << 22)); |
| |
| if (bytesWritten < 0) { |
| PAL_ERR(LOG_TAG, "Error in writing to file"); |
| fclose(fp); |
| ret = -EBADF; |
| goto exit; |
| } |
| } |
| bytesWritten = fprintf(fp, "\n"); |
| if (bytesWritten < 0) { |
| PAL_ERR(LOG_TAG, "Error in writing to file"); |
| fclose(fp); |
| ret = -EBADF; |
| goto exit; |
| } |
| fclose(fp); |
| } |
| } |
| exit: |
| if (builder) { |
| delete builder; |
| builder = NULL; |
| } |
| return ret; |
| |
| } |
| |
| void SpeakerProtection::startSpkrXmaxTmaxLogging() |
| { |
| FILE* log_fp = NULL; |
| int32_t ret = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| /* This condition is added to know if the Speaker_RX graph started or not. |
| * Assuming this file will be pushed to target after playback started |
| * That's how, we will be sure Speaker_RX graph has been started */ |
| |
| while (!log_fp) { |
| log_fp = fopen(PAL_SP_XMAX_TMAX_LOG_PATH, "rb"); |
| } |
| fclose(log_fp); |
| |
| if (remove(PAL_SP_XMAX_TMAX_LOG_PATH) == 0) { |
| PAL_DBG(LOG_TAG, "log_spkr_xmax_tmax file deleted successfully"); |
| } |
| |
| startXmaxLogging = true; |
| while (startXmaxLogging && (ret == 0)) { |
| ret = getSpkrXmaxTmaxData(); |
| if (ret != 0) { |
| PAL_ERR(LOG_TAG, "Failed to get Param for spkr_xmax_tmax"); |
| } |
| std::this_thread::sleep_for(std::chrono::milliseconds(1000)); |
| } |
| } |
| |
| /* |
| * CPS related custom payload |
| */ |
| void SpeakerProtection::updateCpsCustomPayload(int miid, uint32_t phy_add[3], int wsa2_flag) |
| { |
| PayloadBuilder* builder = new PayloadBuilder(); |
| uint8_t* payload = NULL; |
| size_t payloadSize = 0; |
| int max_channels = numberOfChannels; |
| lpass_swr_hw_reg_cfg_t *cpsRegCfg = NULL; |
| int val, ret = 0; |
| |
| if (numberOfChannels > 2) |
| max_channels = 2; |
| else if (numberOfChannels < 1) { |
| PAL_ERR(LOG_TAG,"Received invalid number of channels for CPS payload\n"); |
| goto exit; |
| } |
| |
| pkd_reg_addr_t pkedRegAddr[max_channels]; |
| cps_reg_wr_values_t *cps_thrsh_values; |
| param_id_cps_lpass_swr_thresholds_cfg_t *cps_thrsh_cfg; |
| int dev_num; |
| |
| memset(&pkedRegAddr, 0, sizeof(pkd_reg_addr_t) * max_channels); |
| // Payload for ParamID : PARAM_ID_CPS_LPASS_HW_INTF_CFG |
| cpsRegCfg = (lpass_swr_hw_reg_cfg_t *) calloc(1, sizeof(lpass_swr_hw_reg_cfg_t) |
| + sizeof(pkd_reg_addr_t) * max_channels); |
| if (cpsRegCfg == NULL) { |
| PAL_ERR(LOG_TAG,"Unable to allocate Memory for CPS config\n"); |
| goto exit; |
| } |
| |
| if (!phy_add) { |
| PAL_ERR(LOG_TAG, "Invalid WSA addresses received for SP module instance: %d", miid); |
| goto exit; |
| } |
| |
| cpsRegCfg->num_spkr = max_channels; |
| cpsRegCfg->lpass_wr_cmd_reg_phy_addr = phy_add[0]; |
| cpsRegCfg->lpass_rd_cmd_reg_phy_addr = phy_add[1]; |
| cpsRegCfg->lpass_rd_fifo_reg_phy_addr = phy_add[2]; |
| |
| // Payload for ParamID : PARAM_ID_CPS_LPASS_SWR_THRESHOLDS_CFG |
| cps_thrsh_cfg = (param_id_cps_lpass_swr_thresholds_cfg_t*) calloc(1, |
| sizeof(param_id_cps_lpass_swr_thresholds_cfg_t) |
| + (sizeof(cps_reg_wr_values_t) * max_channels)); |
| if (cps_thrsh_cfg == NULL) { |
| PAL_ERR(LOG_TAG,"Unable to allocate Memory for CPS SWR Threshold config\n"); |
| goto exit; |
| } |
| cps_thrsh_cfg->num_spkr = max_channels; |
| cps_thrsh_cfg->vbatt_lower_threshold_1 = CPS_WSA_VBATT_LOWER_THRESHOLD_1; |
| cps_thrsh_cfg->vbatt_lower_threshold_2 = CPS_WSA_VBATT_LOWER_THRESHOLD_2; |
| cps_thrsh_values = (cps_reg_wr_values_t *)((uint8_t*)cps_thrsh_cfg |
| + sizeof(param_id_cps_lpass_swr_thresholds_cfg_t)); |
| |
| for (int i = 0; i < max_channels; i++) { |
| switch (i) |
| { |
| case 0 : |
| if (wsa2_flag) { |
| dev_num = getCpsDevNumber(SPKR2_RIGHT_WSA_DEV_NUM); |
| } else { |
| dev_num = getCpsDevNumber(SPKR_RIGHT_WSA_DEV_NUM); |
| } |
| break; |
| case 1 : |
| if (wsa2_flag) { |
| dev_num = getCpsDevNumber(SPKR2_LEFT_WSA_DEV_NUM); |
| } else { |
| dev_num = getCpsDevNumber(SPKR_LEFT_WSA_DEV_NUM); |
| } |
| break; |
| } |
| PAL_DBG(LOG_TAG, "CPS Dev number%d for Channel %d",dev_num,i); |
| pkedRegAddr[i].vbatt_pkd_reg_addr = CPS_WSA_VBATT_REG_ADDR; |
| pkedRegAddr[i].temp_pkd_reg_addr = CPS_WSA_TEMP_REG_ADDR; |
| |
| pkedRegAddr[i].vbatt_pkd_reg_addr &= 0xFFFF; |
| pkedRegAddr[i].temp_pkd_reg_addr &= 0xFFFF; |
| |
| val = 0; |
| |
| /* bits 20:23 carry swr device number */ |
| val |= dev_num << 20; |
| /* bits 24:27 carry read length in bytes */ |
| val |= 1 << 24; |
| |
| /* bits 16:19 carry command id */ |
| val |= (i*2) << 16; |
| |
| /* Update dev num in packed reg addr */ |
| pkedRegAddr[i].vbatt_pkd_reg_addr |= val; |
| |
| val &= 0xFF0FFFF; |
| val |= ((i*2)+1) << 16; |
| |
| pkedRegAddr[i].temp_pkd_reg_addr |= val; |
| |
| /* payload for PARAM_ID_CPS_LPASS_SWR_THRESHOLDS_CFG.*/ |
| memcpy(cps_thrsh_values, &sp_cps_thrsh_values, sizeof(cps_reg_wr_values_t)); |
| /* Retain dev_num from val */ |
| val &= 0x00F00000; |
| for (int j = 0;j < CPS_NUM_VBATT_THRESHOLD_VALUES;j++) { |
| val &= 0xFFF0FFFF; |
| /* Update cmd id and dev_num to the payload.*/ |
| val |= ((i * 3) + j) << 16; |
| cps_thrsh_values->value_normal_threshold[j] |= val; |
| cps_thrsh_values->value_lower_threshold_1[j] |= val; |
| cps_thrsh_values->value_lower_threshold_2[j] |= val; |
| } |
| cps_thrsh_values++; |
| } |
| memcpy(cpsRegCfg->pkd_reg_addr, pkedRegAddr, sizeof(pkd_reg_addr_t) * |
| max_channels); |
| |
| // Payload builder for ParamID : PARAM_ID_CPS_LPASS_HW_INTF_CFG |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_CPS_LPASS_HW_INTF_CFG,(void *)cpsRegCfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| free(cpsRegCfg); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| } |
| } |
| |
| // Payload builder for ParamID : PARAM_ID_CPS_LPASS_SWR_THRESHOLDS_CFG |
| payloadSize = 0; |
| payload = NULL; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_CPS_LPASS_SWR_THRESHOLDS_CFG,(void *)cps_thrsh_cfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| free(cps_thrsh_cfg); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| } |
| } |
| |
| exit: |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| } |
| |
| /* |
| * Function to trigger Processing mode. |
| * The parameter that it accepts are below: |
| * true - Start Processing Mode |
| * false - Stop Processing Mode |
| */ |
| int32_t SpeakerProtection::spkrProtProcessingMode(bool flag) |
| { |
| int ret = 0, dir = TX_HOSTLESS, flags, viParamId = 0, tempCH, Channels; |
| char mSndDeviceName_vi[128] = {0}; |
| char mSndDeviceName_cps[128] = {0}; |
| char mSndDeviceName_SP[128] = {0}; |
| uint8_t* payload = NULL; |
| uint32_t devicePropId[] = {0x08000010, 1, 0x2}; |
| uint32_t miid = 0, SP_II_miid = 0, SP_miid = 0, tagid, deviceid; |
| bool isTxFeandBeConnected = true; |
| bool isCPSFeandBeConnected = true; |
| size_t payloadSize = 0; |
| struct pal_device device, deviceCPS; |
| struct pal_channel_info ch_info; |
| struct pal_stream_attributes sAttr; |
| struct pcm_config config; |
| struct mixer_ctl *connectCtrl = NULL; |
| struct mixer_ctl *connectCtrl2 = NULL; |
| struct audio_route *audioRoute = NULL; |
| struct vi_r0t0_cfg_t r0t0Array[numberOfChannels]; |
| struct agmMetaData deviceMetaData(nullptr, 0); |
| struct mixer_ctl *beMetaDataMixerCtrl = nullptr; |
| FILE *fp; |
| std::string backEndName, backEndNameRx, backEndNameCPS; |
| std::vector <std::pair<int, int>> keyVector; |
| std::vector <std::pair<int, int>> calVector; |
| std::shared_ptr<ResourceManager> rm; |
| std::ostringstream connectCtrlNameBeCPS; |
| std::ostringstream connectCtrlNameBeVI; |
| std::ostringstream connectCtrlNameBeSP; |
| std::ostringstream connectCtrlNameCPS; |
| std::ostringstream connectCtrlName; |
| param_id_sp_th_vi_r0t0_cfg_t *spR0T0confg; |
| param_id_sp_vi_op_mode_cfg_t modeConfg; |
| param_id_sp_vi_channel_map_cfg_t viChannelMapConfg; |
| param_id_sp_op_mode_t spModeConfg; |
| param_id_sp_ex_vi_mode_cfg_t viExModeConfg; |
| param_id_cps_ch_map_t cpsChannelMapConfg; |
| std::shared_ptr<Device> dev = nullptr; |
| Stream *stream = NULL; |
| Session *session = NULL; |
| std::vector<Stream*> activeStreams; |
| PayloadBuilder* builder = new PayloadBuilder(); |
| std::unique_lock<std::mutex> lock(calibrationMutex); |
| struct agm_event_reg_cfg event_cfg; |
| session_callback sessionCb; |
| uint32_t phy_add[3]; |
| |
| PAL_DBG(LOG_TAG, "Flag %d", flag); |
| deviceMutex.lock(); |
| |
| sessionCb = handleSPCallback; |
| |
| if (flag) { |
| if (spkrCalState == SPKR_CALIB_IN_PROGRESS) { |
| // Close the Graphs |
| cv.notify_all(); |
| // Wait for cleanup |
| cv.wait(lock); |
| spkrCalState = SPKR_NOT_CALIBRATED; |
| txPcm = NULL; |
| rxPcm = NULL; |
| cps1Pcm = NULL; |
| cps2Pcm = NULL; |
| PAL_DBG(LOG_TAG, "Stopped calibration mode"); |
| } |
| numberOfRequest++; |
| if (numberOfRequest > 1) { |
| // R0T0 already set, we don't need to process the request |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "Custom payload size %zu, Payload %p", customPayloadSize, |
| customPayload); |
| |
| if (customPayload) { |
| free(customPayload); |
| } |
| customPayloadSize = 0; |
| customPayload = NULL; |
| |
| spkrProtSetSpkrStatus(flag); |
| // Speaker in use. Start the Processing Mode |
| rm = ResourceManager::getInstance(); |
| if (!rm) { |
| PAL_ERR(LOG_TAG, "Failed to get resource manager instance"); |
| goto exit; |
| } |
| |
| memset(&device, 0, sizeof(device)); |
| memset(&deviceCPS, 0, sizeof(device)); |
| memset(&sAttr, 0, sizeof(sAttr)); |
| memset(&config, 0, sizeof(config)); |
| memset(&modeConfg, 0, sizeof(modeConfg)); |
| memset(&viChannelMapConfg, 0, sizeof(viChannelMapConfg)); |
| memset(&viExModeConfg, 0, sizeof(viExModeConfg)); |
| memset(&spModeConfg, 0, sizeof(spModeConfg)); |
| |
| keyVector.clear(); |
| calVector.clear(); |
| |
| dev = Device::getInstance(&mDeviceAttr, rm); |
| dev->getCurrentSndDevName(mSndDeviceName_SP); |
| |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_SPEAKER && strstr(mSndDeviceName_SP, "mono")) |
| rm->getDeviceInfo(PAL_DEVICE_IN_VI_FEEDBACK, PAL_STREAM_VOICE_CALL, "", &vi_device); |
| else if (mDeviceAttr.id == PAL_DEVICE_OUT_SPEAKER) |
| rm->getDeviceInfo(PAL_DEVICE_IN_VI_FEEDBACK, PAL_STREAM_PROXY, "", &vi_device); |
| |
| if (numberOfChannels == CHANNELS_4) |
| tempCH = MaxCH; |
| else |
| tempCH = numberOfChannels; |
| |
| // Configure device attribute |
| switch(vi_device.channels) { |
| case 1: |
| ch_info.channels = CHANNELS_1; |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| else |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FR; |
| break; |
| case 2: |
| ch_info.channels = CHANNELS_2; |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| ch_info.ch_map[1] = PAL_CHMAP_CHANNEL_FR; |
| break; |
| case 4: |
| ch_info.channels = CHANNELS_4; |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| ch_info.ch_map[1] = PAL_CHMAP_CHANNEL_FR; |
| ch_info.ch_map[2] = PAL_CHMAP_CHANNEL_LB; |
| ch_info.ch_map[3] = PAL_CHMAP_CHANNEL_RB; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported channels"); |
| break; |
| } |
| |
| device.config.ch_info = ch_info; |
| device.config.sample_rate = vi_device.samplerate; |
| device.config.bit_width = vi_device.bit_width; |
| device.config.aud_fmt_id = rm->getAudioFmt(vi_device.bit_width); |
| |
| // Setup TX path |
| device.id = PAL_DEVICE_IN_VI_FEEDBACK; |
| |
| ret = rm->getAudioRoute(&audioRoute); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route address status %d", ret); |
| goto exit; |
| } |
| strlcpy(mSndDeviceName_vi, vi_device.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) { |
| strlcat(mSndDeviceName_vi, FEEDBACK_MONO_1, DEVICE_NAME_MAX_SIZE); |
| } |
| PAL_DBG(LOG_TAG, "get the audio route %s", mSndDeviceName_vi); |
| |
| rm->getBackendName(device.id, backEndName); |
| if (!strlen(backEndName.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain tx backend name for %d", device.id); |
| goto exit; |
| } |
| |
| PayloadBuilder::getDeviceKV(device.id, keyVector); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to obtain device KV for %d", device.id); |
| goto exit; |
| } |
| |
| // Enable VI module |
| if (numberOfChannels == CHANNELS_4) { |
| switch(vi_device.channels) { |
| case 1 : |
| // TODO: check it from RM.xml for left or right configuration |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, RIGHT_SPKR_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_1)); |
| break; |
| case 2 : |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR_WITH_DISABLED_2SP)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_2)); |
| break; |
| case 4 : |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR)); |
| calVector.push_back(std::make_pair(CHANNELS, CHANNELS_4)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto exit; |
| } |
| } else if (numberOfChannels <= CHANNELS_2) { |
| switch(vi_device.channels) { |
| case 1: |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, LEFT_SPKR)); |
| else |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, RIGHT_SPKR)); |
| break; |
| case 2: |
| calVector.push_back(std::make_pair(SPK_PRO_VI_MAP, STEREO_SPKR)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto exit; |
| } |
| } |
| |
| SessionAlsaUtils::getAgmMetaData(keyVector, calVector, |
| (struct prop_data *)devicePropId, deviceMetaData); |
| if (!deviceMetaData.size) { |
| PAL_ERR(LOG_TAG, "VI device metadata is zero"); |
| ret = -ENOMEM; |
| goto exit; |
| } |
| connectCtrlNameBeVI<< backEndName << " metadata"; |
| beMetaDataMixerCtrl = mixer_get_ctl_by_name(virtMixer, |
| connectCtrlNameBeVI.str().data()); |
| if (!beMetaDataMixerCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for VI : %s", backEndName.c_str()); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| if (deviceMetaData.size) { |
| ret = mixer_ctl_set_array(beMetaDataMixerCtrl, (void *)deviceMetaData.buf, |
| deviceMetaData.size); |
| free(deviceMetaData.buf); |
| deviceMetaData.buf = nullptr; |
| } |
| else { |
| PAL_ERR(LOG_TAG, "Device Metadata not set for TX path"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| PAL_DBG(LOG_TAG, "device attribute ch = %d",device.config.ch_info.channels); |
| ret = SessionAlsaUtils::setDeviceMediaConfig(rm, backEndName, &device); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "setDeviceMediaConfig for feedback device failed"); |
| goto exit; |
| } |
| |
| /* Retrieve Hostless PCM device id */ |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| dir = TX_HOSTLESS; |
| pcmDevIdTx = rm->allocateFrontEndIds(sAttr, dir); |
| if (pcmDevIdTx.size() == 0) { |
| PAL_ERR(LOG_TAG, "allocateFrontEndIds failed"); |
| ret = -ENOSYS; |
| goto exit; |
| } |
| |
| connectCtrlName << "PCM" << pcmDevIdTx.at(0) << " connect"; |
| connectCtrl = mixer_get_ctl_by_name(virtMixer, connectCtrlName.str().data()); |
| if (!connectCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control: %s", connectCtrlName.str().data()); |
| goto free_fe; |
| } |
| |
| ret = mixer_ctl_set_enum_by_string(connectCtrl, backEndName.c_str()); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Mixer control %s set with %s failed: %d", |
| connectCtrlName.str().data(), backEndName.c_str(), ret); |
| goto free_fe; |
| } |
| |
| isTxFeandBeConnected = true; |
| |
| config.rate = vi_device.samplerate; |
| switch (vi_device.bit_width) { |
| case 32 : |
| config.format = PCM_FORMAT_S32_LE; |
| break; |
| case 24 : |
| config.format = PCM_FORMAT_S24_LE; |
| break; |
| case 16 : |
| config.format = PCM_FORMAT_S16_LE; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported bit width. Set default as 16"); |
| config.format = PCM_FORMAT_S16_LE; |
| break; |
| } |
| |
| switch (vi_device.channels) { |
| case 1 : |
| config.channels = CHANNELS_1; |
| break; |
| case 2 : |
| config.channels = CHANNELS_2; |
| break; |
| default : |
| PAL_DBG(LOG_TAG, "Unsupported channel. Set default as 2"); |
| config.channels = CHANNELS_2; |
| break; |
| } |
| config.period_size = DEFAULT_PERIOD_SIZE; |
| config.period_count = DEFAULT_PERIOD_COUNT; |
| config.start_threshold = 0; |
| config.stop_threshold = INT_MAX; |
| config.silence_threshold = 0; |
| |
| flags = PCM_IN; |
| |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| if (numberOfChannels == CHANNELS_4) { |
| modeConfg.num_speakers = CHANNELS_2; |
| } else { |
| modeConfg.num_speakers = numberOfChannels; |
| } |
| |
| switch (rm->mSpkrProtModeValue.operationMode) { |
| case PAL_SP_MODE_FACTORY_TEST: |
| modeConfg.th_operation_mode = FACTORY_TEST_MODE; |
| break; |
| case PAL_SP_MODE_V_VALIDATION: |
| modeConfg.th_operation_mode = V_VALIDATION_MODE; |
| break; |
| case PAL_SP_MODE_DYNAMIC_CAL: |
| default: |
| PAL_INFO(LOG_TAG, "Normal mode being used"); |
| modeConfg.th_operation_mode = NORMAL_MODE; |
| } |
| modeConfg.th_quick_calib_flag = 0; |
| |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| ret = SessionAlsaUtils::getModuleInstanceId(virtMixer, pcmDevIdTx.at(0), |
| backEndName.c_str(), tagid, &miid); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto free_fe; |
| } |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_OP_MODE_CFG,(void *)&modeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for VI_OP_MODE_CFG\n"); |
| // Not fatal as by default VI module runs in Normal mode |
| ret = 0; |
| } |
| } |
| |
| // Setting Channel Map configuration for VI module |
| // TODO: Move this to ACDB file |
| if (vi_device.channels == CHANNELS_4) |
| viChannelMapConfg.num_ch = tempCH * 2; |
| else |
| viChannelMapConfg.num_ch = vi_device.channels * 2; |
| |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_CHANNEL_MAP_CFG,(void *)&viChannelMapConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for CHANNEL_MAP_CFG\n"); |
| } |
| } |
| |
| // Setting Excursion mode |
| if (rm->mSpkrProtModeValue.operationMode == PAL_SP_MODE_FACTORY_TEST) |
| viExModeConfg.ex_FTM_mode_enable_flag = 1; // FTM Mode |
| else |
| viExModeConfg.ex_FTM_mode_enable_flag = 0; // Normal Mode |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_EX_VI_MODE_CFG,(void *)&viExModeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for EX_VI_MODE_CFG\n"); |
| ret = 0; |
| } |
| } |
| |
| if (rm->mSpkrProtModeValue.operationMode) { |
| PAL_DBG(LOG_TAG, "Operation mode %d", rm->mSpkrProtModeValue.operationMode); |
| param_id_sp_th_vi_ftm_cfg_t viFtmConfg; |
| if (numberOfChannels == CHANNELS_4) |
| viFtmConfg.num_ch = CHANNELS_2; |
| else |
| viFtmConfg.num_ch = numberOfChannels; |
| switch (rm->mSpkrProtModeValue.operationMode) { |
| case PAL_SP_MODE_FACTORY_TEST: |
| viParamId = PARAM_ID_SP_TH_VI_FTM_CFG; |
| payloadSize = 0; |
| builder->payloadSPConfig (&payload, &payloadSize, miid, |
| viParamId, (void *) &viFtmConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," Payload Failed for FTM mode\n"); |
| } |
| } |
| viParamId = PARAM_ID_SP_EX_VI_FTM_CFG; |
| payloadSize = 0; |
| builder->payloadSPConfig (&payload, &payloadSize, miid, |
| viParamId, (void *) &viFtmConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," Payload Failed for FTM mode\n"); |
| } |
| } |
| break; |
| case PAL_SP_MODE_V_VALIDATION: |
| viParamId = PARAM_ID_SP_TH_VI_V_VALI_CFG; |
| payloadSize = 0; |
| builder->payloadSPConfig (&payload, &payloadSize, miid, |
| viParamId, (void *) &viFtmConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," Payload Failed for FTM mode\n"); |
| } |
| } |
| break; |
| case PAL_SP_MODE_DYNAMIC_CAL: |
| PAL_ERR(LOG_TAG, "Dynamic cal in Processing mode!!"); |
| break; |
| } |
| } |
| |
| // Setting the R0T0 values |
| PAL_DBG(LOG_TAG, "Read R0T0 from file"); |
| if (ch == CHANNELS_4) |
| fp = fopen(PAL_SP_II_TEMP_PATH, "rb"); |
| else |
| fp = fopen(PAL_SP_I_TEMP_PATH, "rb"); |
| |
| if (fp) { |
| for (int i = 0; i < tempCH; i++) { |
| fread(&r0t0Array[i].r0_cali_q24, |
| sizeof(r0t0Array[i].r0_cali_q24), 1, fp); |
| fread(&r0t0Array[i].t0_cali_q6, |
| sizeof(r0t0Array[i].t0_cali_q6), 1, fp); |
| } |
| fclose(fp); |
| } |
| else { |
| PAL_DBG(LOG_TAG, "Speaker not calibrated. Send safe value"); |
| for (int i = 0; i < tempCH; i++) { |
| r0t0Array[i].r0_cali_q24 = MIN_RESISTANCE_SPKR_Q24; |
| r0t0Array[i].t0_cali_q6 = SAFE_SPKR_TEMP_Q6; |
| } |
| } |
| |
| spR0T0confg = (param_id_sp_th_vi_r0t0_cfg_t *)calloc(1, |
| sizeof(param_id_sp_th_vi_r0t0_cfg_t) + |
| sizeof(vi_r0t0_cfg_t) * tempCH); |
| if (!spR0T0confg) { |
| PAL_ERR(LOG_TAG," unable to create speaker config payload\n"); |
| goto free_fe; |
| } |
| |
| if (numberOfChannels == CHANNELS_4) |
| spR0T0confg->num_ch = CHANNELS_2; |
| else |
| spR0T0confg->num_ch = numberOfChannels; |
| |
| for (int i = 0; i < spR0T0confg->num_ch; i++) { |
| spR0T0confg->r0t0_cfg[i].r0_cali_q24 = r0t0Array[i].r0_cali_q24; |
| spR0T0confg->r0t0_cfg[i].t0_cali_q6 = r0t0Array[i].t0_cali_q6; |
| PAL_DBG (LOG_TAG,"R0 %x ", spR0T0confg->r0t0_cfg[i].r0_cali_q24); |
| PAL_DBG (LOG_TAG,"T0 %x ", spR0T0confg->r0t0_cfg[i].t0_cali_q6); |
| } |
| |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_TH_VI_R0T0_CFG,(void *)spR0T0confg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| free(spR0T0confg); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| ret = 0; |
| } |
| } |
| |
| } |
| |
| // Setting the values for VI module |
| if (customPayloadSize) { |
| ret = SessionAlsaUtils::setDeviceCustomPayload(rm, backEndName, |
| customPayload, customPayloadSize); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Unable to set custom param for mode"); |
| goto free_fe; |
| } |
| } |
| |
| txPcm = pcm_open(rm->getVirtualSndCard(), pcmDevIdTx.at(0), flags, &config); |
| if (!txPcm) { |
| PAL_ERR(LOG_TAG, "txPcm open failed"); |
| goto free_fe; |
| } |
| |
| if (!pcm_is_ready(txPcm)) { |
| PAL_ERR(LOG_TAG, "txPcm open not ready"); |
| goto err_pcm_open; |
| } |
| |
| PAL_DBG(LOG_TAG, "registering DC detection event for VI module"); |
| payloadSize = sizeof(struct agm_event_reg_cfg); |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| //Register for VI module callback |
| //update tagid based on channels. |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| /* Register for EVENT_ID_SPv5_SPEAKER_DIAGNOSTICS. */ |
| event_cfg.event_id = EVENT_ID_SPv5_SPEAKER_DIAGNOSTICS; |
| event_cfg.event_config_payload_size = 0; |
| event_cfg.is_register = 1; |
| |
| ret = SessionAlsaUtils::registerMixerEvent(virtMixer, pcmDevIdTx.at(0), |
| backEndName.c_str(), tagid, |
| (void *)&event_cfg, payloadSize); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Unable to register event to DSP"); |
| } |
| } |
| |
| ret = rm->registerMixerEventCallback(pcmDevIdTx, sessionCb, (uint64_t)this, true); |
| if (ret != 0) |
| PAL_ERR(LOG_TAG, "Failed to register callback to rm"); |
| |
| // Setting up SP mode |
| rm->getBackendName(mDeviceAttr.id, backEndNameRx); |
| if (!strlen(backEndNameRx.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain rx backend name for %d", mDeviceAttr.id); |
| goto err_pcm_open; |
| } |
| |
| ret = rm->getActiveStream_l(activeStreams, dev); |
| if ((0 != ret) || (activeStreams.size() == 0)) { |
| PAL_ERR(LOG_TAG, " no active stream available"); |
| ret = -EINVAL; |
| goto err_pcm_open; |
| } |
| |
| stream = static_cast<Stream *>(activeStreams[0]); |
| stream->getAssociatedSession(&session); |
| |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| if (ch == CHANNELS_4) |
| tagid = MODULE_SP2; |
| else |
| tagid = MODULE_SP; |
| |
| // Set the operation mode for SP module |
| PAL_DBG(LOG_TAG, "Operation mode for SP %d", |
| rm->mSpkrProtModeValue.operationMode); |
| switch (rm->mSpkrProtModeValue.operationMode) { |
| case PAL_SP_MODE_FACTORY_TEST: |
| spModeConfg.operation_mode = FACTORY_TEST_MODE; |
| break; |
| case PAL_SP_MODE_V_VALIDATION: |
| spModeConfg.operation_mode = V_VALIDATION_MODE; |
| break; |
| default: |
| PAL_INFO(LOG_TAG, "Normal mode being used"); |
| spModeConfg.operation_mode = NORMAL_MODE; |
| } |
| ret = session->getMIID(backEndNameRx.c_str(), tagid, &miid); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto err_pcm_open; |
| } |
| |
| if (ch == CHANNELS_4) |
| { |
| SP_II_miid = miid; |
| } else { |
| SP_miid = miid; |
| } |
| |
| // Set the operation mode for SP module |
| PAL_DBG(LOG_TAG, "Operation mode for SP %d", |
| rm->mSpkrProtModeValue.operationMode); |
| switch (rm->mSpkrProtModeValue.operationMode) { |
| case PAL_SP_MODE_FACTORY_TEST: |
| spModeConfg.operation_mode = FACTORY_TEST_MODE; |
| break; |
| case PAL_SP_MODE_V_VALIDATION: |
| spModeConfg.operation_mode = V_VALIDATION_MODE; |
| break; |
| default: |
| PAL_INFO(LOG_TAG, "Normal mode being used"); |
| spModeConfg.operation_mode = NORMAL_MODE; |
| } |
| |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_OP_MODE,(void *)&spModeConfg); |
| if (payloadSize) { |
| if (customPayload) { |
| free (customPayload); |
| customPayloadSize = 0; |
| customPayload = NULL; |
| } |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| } |
| } |
| } |
| |
| switch(ResourceManager::cpsMode) |
| { |
| case 1: |
| goto cps_dev_setup; |
| case 2: |
| memset(phy_add, 0, sizeof(phy_add)); |
| // wsa883x specific cps payload |
| |
| if(ResourceManager::wsa2_enable) |
| { |
| phy_add[0] = ResourceManager::wsa2_wr_cmd_reg_phy_addr; |
| phy_add[1] = ResourceManager::wsa2_rd_cmd_reg_phy_addr; |
| phy_add[2] = ResourceManager::wsa2_rd_fifo_reg_phy_addr; |
| PAL_DBG(LOG_TAG, "Update the CPS payload for SP_II_miid : %d ",SP_II_miid); |
| updateCpsCustomPayload(SP_II_miid, phy_add, WSA2_REGISTER_ADD); |
| PAL_DBG(LOG_TAG, "Update the CPS payload for SP_miid: %d",SP_miid); |
| memset(phy_add, 0, sizeof(phy_add)); |
| } |
| phy_add[0] = ResourceManager::wsa_wr_cmd_reg_phy_addr; |
| phy_add[1] = ResourceManager::wsa_rd_cmd_reg_phy_addr; |
| phy_add[2] = ResourceManager::wsa_rd_fifo_reg_phy_addr; |
| updateCpsCustomPayload(SP_miid, phy_add, WSA_REGISTER_ADD); |
| PAL_DBG(LOG_TAG, "Updated the CPS payload for both WSA"); |
| default: |
| enableDevice(audioRoute, mSndDeviceName_vi); |
| PAL_DBG(LOG_TAG, "pcm start for TX"); |
| if (pcm_start(txPcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for TX path"); |
| goto err_pcm_open; |
| } |
| // Free up the local variables |
| goto exit; |
| } |
| |
| cps_dev_setup: |
| enableDevice(audioRoute, mSndDeviceName_vi); |
| PAL_DBG(LOG_TAG, "pcm start for TX"); |
| if (pcm_start(txPcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for TX path"); |
| goto err_pcm_open; |
| } |
| |
| keyVector.clear(); |
| calVector.clear(); |
| |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_SPEAKER && strstr(mSndDeviceName_SP, "mono")) |
| rm->getDeviceInfo(PAL_DEVICE_IN_CPS_FEEDBACK, PAL_STREAM_VOICE_CALL, "", &cps_device); |
| else if (mDeviceAttr.id == PAL_DEVICE_OUT_SPEAKER) |
| rm->getDeviceInfo(PAL_DEVICE_IN_CPS_FEEDBACK, PAL_STREAM_PROXY, "", &cps_device); |
| |
| // Configure device attribute |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> 2) { |
| PAL_ERR(LOG_TAG, "Opening CPS "); |
| // Configure device attribute |
| if (cps_device.channels > 1) { |
| ch_info.channels = CHANNELS_2; |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| ch_info.ch_map[1] = PAL_CHMAP_CHANNEL_FR; |
| } |
| else { |
| ch_info.channels = CHANNELS_1; |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| else |
| ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FR; |
| } |
| |
| deviceCPS.config.ch_info = ch_info; |
| deviceCPS.config.sample_rate = cps_device.samplerate; |
| deviceCPS.config.bit_width = cps_device.bit_width; |
| deviceCPS.config.aud_fmt_id = rm->getAudioFmt(cps_device.bit_width); |
| |
| if (ch != CHANNELS_4) |
| deviceCPS.id = PAL_DEVICE_IN_CPS_FEEDBACK; |
| else |
| deviceCPS.id = PAL_DEVICE_IN_CPS2_FEEDBACK; |
| |
| ret = rm->getAudioRoute(&audioRoute); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route address status %d", ret); |
| goto err_pcm_open; |
| } |
| strlcpy(mSndDeviceName_cps, cps_device.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) { |
| strlcat(mSndDeviceName_cps, FEEDBACK_MONO_1, DEVICE_NAME_MAX_SIZE); |
| } |
| |
| PAL_DBG(LOG_TAG, "get the audio route %s", mSndDeviceName_cps); |
| |
| rm->getBackendName(deviceCPS.id, backEndNameCPS); |
| if (!strlen(backEndNameCPS.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain CPS backend name for %d", deviceCPS.id); |
| goto err_pcm_open; |
| } |
| |
| PayloadBuilder::getDeviceKV(deviceCPS.id, keyVector); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to obtain device KV for %d", device.id); |
| goto err_pcm_open; |
| } |
| |
| // Enable the CPS module |
| switch (cps_device.channels) { |
| case 1 : |
| if (mDeviceAttr.id == PAL_DEVICE_OUT_HANDSET) |
| calVector.push_back(std::make_pair(SPK_PRO_CPS_MAP, L_SPKR)); |
| else |
| calVector.push_back(std::make_pair(SPK_PRO_CPS_MAP, R_SPKR)); |
| break; |
| case 2 : |
| calVector.push_back(std::make_pair(SPK_PRO_CPS_MAP, ST_SPKR)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported channel"); |
| goto err_pcm_open; |
| } |
| |
| SessionAlsaUtils::getAgmMetaData(keyVector, calVector, |
| (struct prop_data *)devicePropId, deviceMetaData); |
| if (!deviceMetaData.size) { |
| PAL_ERR(LOG_TAG, "CPS device metadata is zero"); |
| ret = -ENOMEM; |
| goto err_pcm_open; |
| } |
| connectCtrlNameBeCPS<< backEndNameCPS << " metadata"; |
| beMetaDataMixerCtrl = mixer_get_ctl_by_name(virtMixer, |
| connectCtrlNameBeCPS.str().data()); |
| if (!beMetaDataMixerCtrl) { |
| PAL_ERR(LOG_TAG, "invalid mixer control for CPS : %s", backEndNameCPS.c_str()); |
| ret = -EINVAL; |
| goto err_pcm_open; |
| } |
| |
| if (deviceMetaData.size) { |
| ret = mixer_ctl_set_array(beMetaDataMixerCtrl, (void *)deviceMetaData.buf, |
| deviceMetaData.size); |
| free(deviceMetaData.buf); |
| deviceMetaData.buf = nullptr; |
| } |
| else { |
| PAL_ERR(LOG_TAG, "Device Metadata not set for CPS path"); |
| ret = -EINVAL; |
| goto err_pcm_open; |
| } |
| |
| ret = SessionAlsaUtils::setDeviceMediaConfig(rm, backEndNameCPS, &deviceCPS); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "setDeviceMediaConfig for feedback device failed"); |
| goto err_pcm_open; |
| } |
| |
| /* Retrieve Hostless PCM device id */ |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| dir = TX_HOSTLESS; |
| if (ch != CHANNELS_4) { |
| pcmDevIdCPS = rm->allocateFrontEndIds(sAttr, dir); |
| if (pcmDevIdCPS.size() == 0) { |
| PAL_ERR(LOG_TAG, "allocateFrontEndIds failed"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| connectCtrlNameCPS << "PCM" << pcmDevIdCPS.at(0) << " connect"; |
| } else { |
| pcmDevIdCPS2 = rm->allocateFrontEndIds(sAttr, dir); |
| |
| if (pcmDevIdCPS2.size() == 0) { |
| PAL_ERR(LOG_TAG, "allocateFrontEndIds failed"); |
| ret = -ENOSYS; |
| goto err_pcm_open; |
| } |
| connectCtrlNameCPS << "PCM" << pcmDevIdCPS2.at(0) << " connect"; |
| } |
| connectCtrl2 = mixer_get_ctl_by_name(virtMixer, connectCtrlNameCPS.str().data()); |
| |
| if (!connectCtrl2) { |
| PAL_ERR(LOG_TAG, "invalid mixer control: %s", connectCtrlNameCPS.str().data()); |
| goto free_fe; |
| } |
| |
| ret = mixer_ctl_set_enum_by_string(connectCtrl2, backEndNameCPS.c_str()); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Mixer control %s set with %s failed: %d", |
| connectCtrlNameCPS.str().data(), backEndNameCPS.c_str(), ret); |
| goto free_fe; |
| } |
| |
| isCPSFeandBeConnected = true; |
| |
| config.rate = cps_device.samplerate; |
| switch (cps_device.bit_width) { |
| case 32 : |
| config.format = PCM_FORMAT_S32_LE; |
| break; |
| default: |
| PAL_DBG(LOG_TAG, "Unsupported bit width. Set default as 16"); |
| config.format = PCM_FORMAT_S16_LE; |
| break; |
| } |
| |
| switch (cps_device.channels) { |
| case 1 : |
| config.channels = CHANNELS_1; |
| break; |
| case 2 : |
| config.channels = CHANNELS_2; |
| break; |
| default : |
| PAL_DBG(LOG_TAG, "Unsupported channel. Set default as 2"); |
| config.channels = CHANNELS_2; |
| break; |
| } |
| config.period_size = DEFAULT_PERIOD_SIZE; |
| config.period_count = DEFAULT_PERIOD_COUNT; |
| config.start_threshold = 0; |
| config.stop_threshold = INT_MAX; |
| config.silence_threshold = 0; |
| |
| flags = PCM_IN; |
| if (ch != CHANNELS_4) { |
| deviceid = pcmDevIdCPS.at(0); |
| tagid = TAG_MODULE_CPS; |
| } else { |
| deviceid = pcmDevIdCPS2.at(0); |
| tagid = TAG_MODULE_CPS2; |
| } |
| ret = SessionAlsaUtils::getModuleInstanceId(virtMixer, deviceid, |
| backEndNameCPS.c_str(), tagid, &miid); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto free_fe; |
| } |
| |
| // Setting Channel Map configuration for CPS module |
| // TODO: Move this to ACDB file |
| if (ch != CHANNELS_4) |
| cpsChannelMapConfg.num_ch = CHANNELS_2; |
| else |
| cpsChannelMapConfg.num_ch = cps_device.channels; |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_CPS_CHANNEL_MAP,(void *)&cpsChannelMapConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for CPS CHANNEL_MAP_CFG\n"); |
| } |
| } |
| if (ch != CHANNELS_4) { |
| cps1Pcm = pcm_open(rm->getVirtualSndCard(), pcmDevIdCPS.at(0), flags, &config); |
| if (!cps1Pcm) { |
| PAL_ERR(LOG_TAG, "cps1Pcm open failed"); |
| goto free_fe; |
| } |
| |
| if (!pcm_is_ready(cps1Pcm)) { |
| PAL_ERR(LOG_TAG, "cps1Pcm open not ready"); |
| goto err_pcm_open; |
| } |
| |
| enableDevice(audioRoute, mSndDeviceName_cps); |
| PAL_DBG(LOG_TAG, "pcm start for CPS"); |
| if (pcm_start(cps1Pcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for CPS path"); |
| goto err_pcm_open; |
| } |
| } else { |
| cps2Pcm = pcm_open(rm->getVirtualSndCard(), pcmDevIdCPS.at(0), flags, &config); |
| if (!cps2Pcm) { |
| PAL_ERR(LOG_TAG, "cps2Pcm open failed"); |
| goto free_fe; |
| } |
| |
| if (!pcm_is_ready(cps2Pcm)) { |
| PAL_ERR(LOG_TAG, "cps2Pcm open not ready"); |
| goto err_pcm_open; |
| } |
| |
| enableDevice(audioRoute, mSndDeviceName_cps); |
| PAL_DBG(LOG_TAG, "pcm start for CPS"); |
| if (pcm_start(cps2Pcm) < 0) { |
| PAL_ERR(LOG_TAG, "pcm start failed for CPS path"); |
| goto err_pcm_open; |
| } |
| } |
| } |
| |
| if (ResourceManager::isSpkrXmaxTmaxLoggingEnabled) { |
| XmaxTmaxLogThread = std::thread(&SpeakerProtection::startSpkrXmaxTmaxLogging, |
| this); |
| } |
| // Free up the local variables |
| goto exit; |
| } |
| else { |
| if (numberOfRequest == 0) { |
| PAL_ERR(LOG_TAG, "Device not started yet, Stop not expected"); |
| goto exit; |
| } |
| numberOfRequest--; |
| if (numberOfRequest > 0) { |
| // R0T0 already set, we don't need to process the request. |
| goto exit; |
| } |
| spkrProtSetSpkrStatus(flag); |
| // Speaker not in use anymore. Stop the processing mode |
| startXmaxLogging = false; |
| |
| PAL_DBG(LOG_TAG, "Closing VI path"); |
| if (txPcm) { |
| rm = ResourceManager::getInstance(); |
| device.id = PAL_DEVICE_IN_VI_FEEDBACK; |
| |
| ret = rm->getAudioRoute(&audioRoute); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route address status %d", ret); |
| goto exit; |
| } |
| |
| strlcpy(mSndDeviceName_vi, vi_device.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| rm->getBackendName(device.id, backEndName); |
| if (!strlen(backEndName.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain tx backend name for %d", device.id); |
| goto exit; |
| } |
| pcm_stop(txPcm); |
| if (pcmDevIdTx.size() != 0) { |
| if (isTxFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdTx, backEndName); |
| } |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| rm->freeFrontEndIds(pcmDevIdTx, sAttr, dir); |
| pcmDevIdTx.clear(); |
| } |
| pcm_close(txPcm); |
| disableDevice(audioRoute, mSndDeviceName_vi); |
| txPcm = NULL; |
| } |
| PAL_DBG(LOG_TAG, "Closing CPS path"); |
| if(cps1Pcm || cps2Pcm) { |
| rm = ResourceManager::getInstance(); |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> 2) { |
| if (ch != CHANNELS_4) |
| deviceCPS.id = PAL_DEVICE_IN_CPS_FEEDBACK; |
| else |
| deviceCPS.id = PAL_DEVICE_IN_CPS2_FEEDBACK; |
| |
| ret = rm->getAudioRoute(&audioRoute); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route address status %d", ret); |
| goto exit; |
| } |
| |
| strlcpy(mSndDeviceName_cps, cps_device.sndDevName.c_str(), DEVICE_NAME_MAX_SIZE); |
| rm->getBackendName(deviceCPS.id, backEndNameCPS); |
| if (!strlen(backEndNameCPS.c_str())) { |
| PAL_ERR(LOG_TAG, "Failed to obtain CPS backend name for %d", deviceCPS.id); |
| goto exit; |
| } |
| if (ch != CHANNELS_4) { |
| pcm_stop(cps1Pcm); |
| if (pcmDevIdCPS.size() != 0) { |
| if (isCPSFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdCPS, backEndNameCPS); |
| } |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| rm->freeFrontEndIds(pcmDevIdCPS, sAttr, dir); |
| pcmDevIdCPS.clear(); |
| } |
| pcm_close(cps1Pcm); |
| disableDevice(audioRoute, mSndDeviceName_cps); |
| cps1Pcm = NULL; |
| } else { |
| pcm_stop(cps2Pcm); |
| if (pcmDevIdCPS2.size() != 0) { |
| if (isCPSFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdCPS2, backEndNameCPS); |
| } |
| sAttr.type = PAL_STREAM_LOW_LATENCY; |
| sAttr.direction = PAL_AUDIO_INPUT_OUTPUT; |
| rm->freeFrontEndIds(pcmDevIdCPS2, sAttr, dir); |
| pcmDevIdCPS2.clear(); |
| } |
| pcm_close(cps2Pcm); |
| disableDevice(audioRoute, mSndDeviceName_cps); |
| cps2Pcm = NULL; |
| } |
| } |
| goto exit; |
| } |
| } |
| |
| err_pcm_open : |
| if (txPcm) { |
| pcm_close(txPcm); |
| disableDevice(audioRoute, mSndDeviceName_vi); |
| txPcm = NULL; |
| } |
| |
| if (cps1Pcm) { |
| pcm_close(cps1Pcm); |
| ret = rm->getSndDeviceName(PAL_DEVICE_IN_CPS_FEEDBACK , mSndDeviceName_cps); |
| disableDevice(audioRoute, mSndDeviceName_cps); |
| cps1Pcm = NULL; |
| } |
| |
| if (cps2Pcm) { |
| pcm_close(cps2Pcm); |
| ret = rm->getSndDeviceName(PAL_DEVICE_IN_CPS2_FEEDBACK , mSndDeviceName_cps); |
| disableDevice(audioRoute, mSndDeviceName_cps); |
| cps2Pcm = NULL; |
| } |
| |
| free_fe: |
| if (pcmDevIdTx.size() != 0) { |
| if (isTxFeandBeConnected) { |
| disconnectFeandBe(pcmDevIdTx, backEndName); |
| } |
| rm->freeFrontEndIds(pcmDevIdTx, sAttr, dir); |
| pcmDevIdTx.clear(); |
| } |
| if (pcmDevIdCPS.size() != 0) { |
| if (isCPSFeandBeConnected) { |
| deviceCPS.id = PAL_DEVICE_IN_CPS_FEEDBACK; |
| ret = rm->getSndDeviceName(deviceCPS.id , mSndDeviceName_cps); |
| rm->getBackendName(deviceCPS.id, backEndNameCPS); |
| disconnectFeandBe(pcmDevIdCPS, backEndNameCPS); |
| } |
| rm->freeFrontEndIds(pcmDevIdCPS, sAttr, dir); |
| pcmDevIdCPS.clear(); |
| } |
| if (pcmDevIdCPS2.size() != 0) { |
| if (isCPSFeandBeConnected) { |
| deviceCPS.id = PAL_DEVICE_IN_CPS2_FEEDBACK; |
| ret = rm->getSndDeviceName(deviceCPS.id , mSndDeviceName_cps); |
| rm->getBackendName(deviceCPS.id, backEndNameCPS); |
| disconnectFeandBe(pcmDevIdCPS2, backEndNameCPS); |
| } |
| rm->freeFrontEndIds(pcmDevIdCPS2, sAttr, dir); |
| pcmDevIdCPS2.clear(); |
| } |
| exit: |
| deviceMutex.unlock(); |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| return ret; |
| } |
| |
| void SpeakerProtection::updateSPcustomPayload() |
| { |
| PayloadBuilder* builder = new PayloadBuilder(); |
| uint8_t* payload = NULL; |
| size_t payloadSize = 0; |
| std::string backEndName; |
| std::shared_ptr<Device> dev = nullptr; |
| Stream *stream = NULL; |
| Session *session = NULL; |
| std::vector<Stream*> activeStreams; |
| uint32_t miid = 0, ret, tagid; |
| param_id_sp_op_mode_t spModeConfg; |
| |
| rm->getBackendName(mDeviceAttr.id, backEndName); |
| dev = Device::getInstance(&mDeviceAttr, rm); |
| ret = rm->getActiveStream_l(activeStreams, dev); |
| if ((0 != ret) || (activeStreams.size() == 0)) { |
| PAL_ERR(LOG_TAG, " no active stream available"); |
| goto exit; |
| } |
| stream = static_cast<Stream *>(activeStreams[0]); |
| stream->getAssociatedSession(&session); |
| for (int ch = numberOfChannels; ch != 0; ch == ch >> CHANNELS_2) { |
| if (ch == CHANNELS_4) |
| tagid = MODULE_SP2; |
| else { |
| tagid = MODULE_SP; |
| } |
| ret = session->getMIID(backEndName.c_str(), tagid, &miid); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto exit; |
| } |
| |
| if (customPayloadSize) { |
| free(customPayload); |
| customPayloadSize = 0; |
| } |
| |
| spModeConfg.operation_mode = NORMAL_MODE; |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_OP_MODE,(void *)&spModeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| } |
| } |
| } |
| exit: |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| return; |
| } |
| |
| |
| int SpeakerProtection::speakerProtectionDynamicCal() |
| { |
| int ret = 0; |
| |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (calThrdCreated) { |
| PAL_DBG(LOG_TAG, "Calibration already triggered Thread State %d", |
| calThrdCreated); |
| return ret; |
| } |
| |
| threadExit = false; |
| spkrCalState = SPKR_NOT_CALIBRATED; |
| |
| calibrationCallbackStatus = 0; |
| mDspCallbackRcvd = false; |
| |
| calThrdCreated = true; |
| isDynamicCalTriggered = true; |
| |
| std::thread dynamicCalThread(&SpeakerProtection::spkrCalibrationThread, this); |
| |
| dynamicCalThread.detach(); |
| |
| PAL_DBG(LOG_TAG, "Exit"); |
| |
| return ret; |
| } |
| |
| int SpeakerProtection::start() |
| { |
| PAL_DBG(LOG_TAG, "Enter"); |
| |
| if (ResourceManager::isVIRecordStarted) { |
| PAL_DBG(LOG_TAG, "record running so just update SP payload"); |
| updateSPcustomPayload(); |
| } |
| else { |
| spkrProtProcessingMode(true); |
| } |
| |
| PAL_DBG(LOG_TAG, "Calling Device start"); |
| Device::start(); |
| return 0; |
| } |
| |
| int SpeakerProtection::stop() |
| { |
| PAL_DBG(LOG_TAG, "Inside Speaker Protection stop"); |
| Device::stop(); |
| if (ResourceManager::isVIRecordStarted) { |
| PAL_DBG(LOG_TAG, "record running so no need to proceed"); |
| ResourceManager::isVIRecordStarted = false; |
| return 0; |
| } |
| spkrProtProcessingMode(false); |
| return 0; |
| } |
| |
| |
| int32_t SpeakerProtection::setParameter(uint32_t param_id, void *param) |
| { |
| PAL_DBG(LOG_TAG, "Inside Speaker Protection Set parameters"); |
| (void ) param; |
| if (param_id == PAL_SP_MODE_DYNAMIC_CAL) |
| speakerProtectionDynamicCal(); |
| return 0; |
| } |
| |
| int32_t SpeakerProtection::getFTMParameter(void **param) |
| { |
| int size = 0, status = 0, tagid = 0; |
| int spkr1_status = 0; |
| int spkr2_status = 0; |
| int spkr3_status = 0; |
| int spkr4_status = 0; |
| uint32_t miid = 0; |
| const char *getParamControl = "getParam"; |
| char *pcmDeviceName = NULL; |
| uint8_t* payload = NULL; |
| size_t payloadSize = 0; |
| struct mixer_ctl *ctl; |
| std::ostringstream cntrlName; |
| std::ostringstream resString; |
| std::string backendName; |
| param_id_sp_th_vi_ftm_params_t ftm; |
| param_id_sp_ex_vi_ftm_params_t exFtm; |
| PayloadBuilder* builder = new PayloadBuilder(); |
| vi_th_ftm_params_t ftm_ret[numberOfChannels]; |
| vi_ex_ftm_params_t exFtm_ret[numberOfChannels]; |
| param_id_sp_th_vi_ftm_params_t *ftmValue; |
| param_id_sp_ex_vi_ftm_params_t *exFtmValue; |
| |
| memset(&ftm_ret, 0,sizeof(vi_th_ftm_params_t) * numberOfChannels); |
| memset(&exFtm_ret, 0,sizeof(vi_ex_ftm_params_t) * numberOfChannels); |
| |
| pcmDeviceName = rm->getDeviceNameFromID(pcmDevIdTx.at(0)); |
| if (pcmDeviceName) { |
| cntrlName<<pcmDeviceName<<" "<<getParamControl; |
| } else { |
| PAL_ERR(LOG_TAG, "Error: %d Unable to get Device name\n", -EINVAL); |
| goto exit; |
| } |
| |
| ctl = mixer_get_ctl_by_name(virtMixer, cntrlName.str().data()); |
| if (!ctl) { |
| status = -ENOENT; |
| PAL_ERR(LOG_TAG, "Error: %d Invalid mixer control: %s\n", status,cntrlName.str().data()); |
| goto exit; |
| } |
| rm->getBackendName(PAL_DEVICE_IN_VI_FEEDBACK, backendName); |
| if (!strlen(backendName.c_str())) { |
| status = -ENOENT; |
| PAL_ERR(LOG_TAG, "Error: %d Failed to obtain VI backend name", status); |
| goto exit; |
| } |
| |
| for (int ch = numberOfChannels; ch != 0; ch == ch >> CHANNELS_2) { |
| |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else |
| tagid = MODULE_VI; |
| |
| status = SessionAlsaUtils::getModuleInstanceId(virtMixer, pcmDevIdTx.at(0), |
| backendName.c_str(), tagid, &miid); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: %d Failed to get tag info %x", status, MODULE_VI); |
| goto exit; |
| } |
| if (numberOfChannels == CHANNELS_4) |
| ftm.num_ch = CHANNELS_2; |
| else |
| ftm.num_ch = numberOfChannels; |
| |
| builder->payloadSPConfig (&payload, &payloadSize, miid, |
| PARAM_ID_SP_TH_VI_FTM_PARAMS, &ftm); |
| |
| status = mixer_ctl_set_array(ctl, payload, payloadSize); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Set failed status = %d", status); |
| goto exit; |
| } |
| |
| memset(payload, 0, payloadSize); |
| |
| status = mixer_ctl_get_array(ctl, payload, payloadSize); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Get failed status = %d", status); |
| } else { |
| ftmValue = (param_id_sp_th_vi_ftm_params_t *) (payload + |
| sizeof(struct apm_module_param_data_t)); |
| if (ch == CHANNELS_4) { |
| for (int i = 2, j = 0; i < numberOfChannels; i++, j++) { |
| ftm_ret[i].ftm_rDC_q24 = ftmValue->vi_th_ftm_params[j].ftm_rDC_q24; |
| ftm_ret[i].ftm_temp_q22 = ftmValue->vi_th_ftm_params[j].ftm_temp_q22; |
| ftm_ret[i].status = ftmValue->vi_th_ftm_params[j].status; |
| } |
| } else { |
| for (int i = 0, j = 0; i < ftm.num_ch; i++, j++) { |
| ftm_ret[i].ftm_rDC_q24 = ftmValue->vi_th_ftm_params[j].ftm_rDC_q24; |
| ftm_ret[i].ftm_temp_q22 = ftmValue->vi_th_ftm_params[j].ftm_temp_q22; |
| ftm_ret[i].status = ftmValue->vi_th_ftm_params[j].status; |
| } |
| } |
| } |
| |
| PAL_DBG(LOG_TAG, "Got FTM value with status %d", ftm_ret[0].status); |
| |
| if (payload) { |
| delete payload; |
| payloadSize = 0; |
| payload = NULL; |
| } |
| if (numberOfChannels == CHANNELS_4) |
| exFtm.num_ch = CHANNELS_2; |
| else |
| exFtm.num_ch = numberOfChannels; |
| |
| builder->payloadSPConfig (&payload, &payloadSize, miid, |
| PARAM_ID_SP_EX_VI_FTM_PARAMS, &exFtm); |
| |
| status = mixer_ctl_set_array(ctl, payload, payloadSize); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: %d Mixer cntrl Set failed", status); |
| goto exit; |
| } |
| |
| memset(payload, 0, payloadSize); |
| |
| status = mixer_ctl_get_array(ctl, payload, payloadSize); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Error: %d Get failed ", status); |
| } |
| else { |
| exFtmValue = (param_id_sp_ex_vi_ftm_params_t *) (payload + |
| sizeof(struct apm_module_param_data_t)); |
| if (ch == CHANNELS_4) { |
| for (int i = 2, j = 0; i < numberOfChannels; i++, j++) { |
| exFtm_ret[i].ftm_Re_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Re_q24; |
| exFtm_ret[i].ftm_Bl_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Bl_q24; |
| exFtm_ret[i].ftm_Kms_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Kms_q24; |
| exFtm_ret[i].ftm_Fres_q20 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Fres_q20; |
| exFtm_ret[i].ftm_Qms_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Qms_q24; |
| exFtm_ret[i].status = exFtmValue->fbsp_ex_vi_ftm_get_param[j].status; |
| } |
| } else { |
| for (int i = 0, j = 0; i < exFtm.num_ch; i++, j++) { |
| exFtm_ret[i].ftm_Re_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Re_q24; |
| exFtm_ret[i].ftm_Bl_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Bl_q24; |
| exFtm_ret[i].ftm_Kms_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Kms_q24; |
| exFtm_ret[i].ftm_Fres_q20 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Fres_q20; |
| exFtm_ret[i].ftm_Qms_q24 = exFtmValue->fbsp_ex_vi_ftm_get_param[j].ftm_Qms_q24; |
| exFtm_ret[i].status = exFtmValue->fbsp_ex_vi_ftm_get_param[j].status; |
| } |
| } |
| } |
| PAL_DBG(LOG_TAG, "Got FTM Excursion value with status %d", exFtm_ret[0].status); |
| |
| if (payload) { |
| delete payload; |
| payloadSize = 0; |
| payload = NULL; |
| } |
| } |
| switch(numberOfChannels) { |
| case 1 : |
| if (exFtm_ret[0].status == 4 && ftm_ret[0].status == 4) |
| spkr1_status = 1; |
| resString << "SpkrParamStatus: " << spkr1_status << "; Rdc: " |
| << ((ftm_ret[0].ftm_rDC_q24)/(1<<24)) << "; Temp: " |
| << ((ftm_ret[0].ftm_temp_q22)/(1<<22)) << "; Res: " |
| << ((exFtm_ret[0].ftm_Re_q24)/(1<<24)) << "; Bl: " |
| << ((exFtm_ret[0].ftm_Bl_q24)/(1<<24)) << "; Rms: " |
| << ((exFtm_ret[0].ftm_Rms_q24)/(1<<24)) << "; Kms: " |
| << ((exFtm_ret[0].ftm_Kms_q24)/(1<<24)) << "; Fres: " |
| << ((exFtm_ret[0].ftm_Fres_q20)/(1<<20)) << "; Qms: " |
| << ((exFtm_ret[0].ftm_Qms_q24)/(1<<24)); |
| break; |
| case 2 : |
| if (exFtm_ret[0].status == 4 && ftm_ret[0].status == 4) |
| spkr1_status = 1; |
| if (exFtm_ret[1].status == 4 && ftm_ret[1].status == 4) |
| spkr2_status = 1; |
| resString << "SpkrParamStatus: " << spkr1_status <<", "<< spkr2_status |
| << "; Rdc: " << (((float)ftm_ret[0].ftm_rDC_q24)/(1<<24)) << ", " |
| << (((float)ftm_ret[1].ftm_rDC_q24)/(1<<24)) << "; Temp: " |
| << ((ftm_ret[0].ftm_temp_q22)/(1<<22)) << ", " |
| << ((ftm_ret[1].ftm_temp_q22)/(1<<22)) <<"; Res: " |
| << ((exFtm_ret[0].ftm_Re_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Re_q24)/(1<<24)) << "; Bl: " |
| << ((exFtm_ret[0].ftm_Bl_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Bl_q24)/(1<<24)) << "; Rms: " |
| << ((exFtm_ret[0].ftm_Rms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Rms_q24)/(1<<24)) << "; Kms: " |
| << ((exFtm_ret[0].ftm_Kms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Kms_q24)/(1<<24)) << "; Fres: " |
| << (((float)exFtm_ret[0].ftm_Fres_q20)/(1<<20)) << ", " |
| << (((float)exFtm_ret[1].ftm_Fres_q20)/(1<<20)) << "; Qms: " |
| << ((exFtm_ret[0].ftm_Qms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Qms_q24)/(1<<24)); |
| break; |
| case 4 : |
| if (exFtm_ret[0].status == 4 && ftm_ret[0].status == 4) |
| spkr1_status = 1; |
| if (exFtm_ret[1].status == 4 && ftm_ret[1].status == 4) |
| spkr2_status = 1; |
| if (exFtm_ret[2].status == 4 && ftm_ret[2].status == 4) |
| spkr3_status = 1; |
| if (exFtm_ret[3].status == 4 && ftm_ret[3].status == 4) |
| spkr4_status = 1; |
| resString << "SpkrParamStatus: " << spkr1_status <<", "<< spkr2_status |
| <<", "<< spkr3_status <<", "<< spkr4_status << "; Rdc: " |
| << ((ftm_ret[0].ftm_rDC_q24)/(1<<24)) << ", " |
| << ((ftm_ret[1].ftm_rDC_q24)/(1<<24)) << ", " |
| << ((ftm_ret[2].ftm_rDC_q24)/(1<<24)) <<", " |
| << ((ftm_ret[3].ftm_rDC_q24)/(1<<24)) <<"; Temp: " |
| << ((ftm_ret[0].ftm_temp_q22)/(1<<22)) << ", " |
| << ((ftm_ret[1].ftm_temp_q22)/(1<<22)) << ", " |
| << ((ftm_ret[2].ftm_temp_q22)/(1<<22)) << ", " |
| << ((ftm_ret[3].ftm_temp_q22)/(1<<22)) <<"; Res: " |
| << ((exFtm_ret[0].ftm_Re_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Re_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[2].ftm_Re_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[3].ftm_Re_q24)/(1<<24)) << "; Bl: " |
| << ((exFtm_ret[0].ftm_Bl_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Bl_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[2].ftm_Bl_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[3].ftm_Bl_q24)/(1<<24)) << "; Rms: " |
| << ((exFtm_ret[0].ftm_Rms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Rms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[2].ftm_Rms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[3].ftm_Rms_q24)/(1<<24)) << "; Kms: " |
| << ((exFtm_ret[0].ftm_Kms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Kms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[2].ftm_Kms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[3].ftm_Kms_q24)/(1<<24)) << "; Fres: " |
| << ((exFtm_ret[0].ftm_Fres_q20)/(1<<20)) << ", " |
| << ((exFtm_ret[1].ftm_Fres_q20)/(1<<20)) << ", " |
| << ((exFtm_ret[2].ftm_Fres_q20)/(1<<20)) << ", " |
| << ((exFtm_ret[3].ftm_Fres_q20)/(1<<20)) << "; Qms: " |
| << ((exFtm_ret[0].ftm_Qms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[1].ftm_Qms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[2].ftm_Qms_q24)/(1<<24)) << ", " |
| << ((exFtm_ret[3].ftm_Qms_q24)/(1<<24)); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "No support for Speakers > 2"); |
| goto exit; |
| } |
| |
| PAL_DBG(LOG_TAG, "Get param value %s", resString.str().c_str()); |
| if (resString.str().length() > 0) { |
| memcpy((char *) (param), resString.str().c_str(), |
| resString.str().length()); |
| size = resString.str().length(); |
| |
| // Get is done now, we will clear up the stored mode now |
| memset(&(rm->mSpkrProtModeValue), 0, sizeof(pal_spkr_prot_payload)); |
| } |
| |
| exit : |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| if(!status) |
| return size; |
| else |
| return status; |
| |
| } |
| |
| int32_t SpeakerProtection::getCalibrationData(void **param) |
| { |
| int i, tempCH = 0, status = 0; |
| struct vi_r0t0_cfg_t r0t0Array[numberOfChannels]; |
| double dr0[numberOfChannels]; |
| double dt0[numberOfChannels]; |
| std::ostringstream resString; |
| FILE *fp; |
| |
| memset(r0t0Array, 0, sizeof(vi_r0t0_cfg_t) * numberOfChannels); |
| memset(dr0, 0, sizeof(double) * numberOfChannels); |
| memset(dt0, 0, sizeof(double) * numberOfChannels); |
| for (int ch = numberOfChannels; ch != 0; ch = ch >> CHANNELS_2) { |
| if (ch == CHANNELS_4) { |
| fp = fopen(PAL_SP_II_TEMP_PATH, "rb"); |
| tempCH = CHANNELS_2; |
| } else |
| fp = fopen(PAL_SP_I_TEMP_PATH, "rb"); |
| if (fp) { |
| for (i = 0; i < MaxCH; i++) { |
| fread(&r0t0Array[i].r0_cali_q24, |
| sizeof(r0t0Array[i].r0_cali_q24), 1, fp); |
| fread(&r0t0Array[i].t0_cali_q6, |
| sizeof(r0t0Array[i].t0_cali_q6), 1, fp); |
| // Convert to readable format |
| dr0[i+tempCH] = ((double)r0t0Array[i].r0_cali_q24)/(1 << 24); |
| dt0[i+tempCH] = ((double)r0t0Array[i].t0_cali_q6)/(1 << 6); |
| PAL_DBG(LOG_TAG, "R0= %lf, T0= %lf", dr0[i+tempCH], dt0[i+tempCH]); |
| } |
| fclose(fp); |
| } |
| else { |
| status = -EINVAL; |
| PAL_ERR(LOG_TAG, "No cal file present"); |
| } |
| tempCH = CHANNELS_2; |
| } |
| if (numberOfChannels == CHANNELS_4) |
| resString << "SpkrCalStatus: " << status << "; R0: " << dr0[0] << ", " |
| << dr0[1] << ", " << dr0[2] << ", " << dr0[3] << "; T0: " |
| << dt0[0] << ", " << dt0[1] << ", " << dt0[2] << ", " << dt0[3] |
| << ";"; |
| else |
| resString << "SpkrCalStatus: " << status << "; R0: " << dr0[0] << ", " |
| << dr0[1] << "; T0: "<< dt0[0] << ", " << dt0[1] << ";"; |
| |
| PAL_DBG(LOG_TAG, "Calibration value %s", resString.str().c_str()); |
| |
| memcpy((char *) (param), resString.str().c_str(), resString.str().length()); |
| |
| if(!status) |
| return resString.str().length(); |
| else |
| return status; |
| |
| } |
| |
| int32_t SpeakerProtection::getParameter(uint32_t param_id, void **param) |
| { |
| int32_t status = 0; |
| switch(param_id) { |
| case PAL_PARAM_ID_SP_GET_CAL: |
| status = getCalibrationData(param); |
| break; |
| case PAL_PARAM_ID_SP_MODE: |
| status = getFTMParameter(param); |
| break; |
| default : |
| PAL_ERR(LOG_TAG, "Unsupported operation"); |
| status = -EINVAL; |
| break; |
| } |
| return status; |
| } |
| |
| /* |
| * VI feedack related functionalities |
| */ |
| |
| void SpeakerFeedback::updateVIcustomPayload() |
| { |
| PayloadBuilder* builder = new PayloadBuilder(); |
| uint8_t* payload = NULL; |
| size_t payloadSize = 0; |
| std::string backEndName; |
| std::shared_ptr<Device> dev = nullptr; |
| Stream *stream = NULL; |
| Session *session = NULL; |
| std::vector<Stream*> activeStreams; |
| uint32_t miid = 0, ret = 0,tagid; |
| struct vi_r0t0_cfg_t r0t0Array[numSpeaker]; |
| FILE *fp = NULL; |
| int Channels, tempCH; |
| param_id_sp_th_vi_r0t0_cfg_t *spR0T0confg; |
| param_id_sp_vi_op_mode_cfg_t modeConfg; |
| param_id_sp_vi_channel_map_cfg_t viChannelMapConfg; |
| param_id_sp_ex_vi_mode_cfg_t viExModeConfg; |
| |
| rm->getBackendName(mDeviceAttr.id, backEndName); |
| dev = Device::getInstance(&mDeviceAttr, rm); |
| ret = rm->getActiveStream_l(activeStreams, dev); |
| if ((0 != ret) || (activeStreams.size() == 0)) { |
| PAL_ERR(LOG_TAG, " no active stream available"); |
| goto exit; |
| } |
| stream = static_cast<Stream *>(activeStreams[0]); |
| stream->getAssociatedSession(&session); |
| |
| if (numSpeaker == CHANNELS_4) |
| tempCH = CHANNELS_2; |
| else |
| tempCH = numSpeaker; |
| |
| for (int ch = numSpeaker; ch != 0; ch >> CHANNELS_2) { |
| if (ch == CHANNELS_4) |
| tagid = MODULE_VI2; |
| else{ |
| tagid = MODULE_VI; |
| } |
| ret = session->getMIID(backEndName.c_str(), tagid, &miid); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "Failed to get tag info %x, status = %d", tagid, ret); |
| goto exit; |
| } |
| |
| if (customPayloadSize) { |
| free(customPayload); |
| customPayloadSize = 0; |
| } |
| |
| memset(&modeConfg, 0, sizeof(modeConfg)); |
| memset(&viChannelMapConfg, 0, sizeof(viChannelMapConfg)); |
| memset(&viExModeConfg, 0, sizeof(viExModeConfg)); |
| memset(&r0t0Array, 0, sizeof(struct vi_r0t0_cfg_t) * numSpeaker); |
| |
| // Setting the mode of VI module |
| if (numSpeaker == CHANNELS_4) |
| modeConfg.num_speakers = CHANNELS_2; |
| else { |
| modeConfg.num_speakers = numSpeaker; |
| } |
| modeConfg.th_operation_mode = NORMAL_MODE; |
| modeConfg.th_quick_calib_flag = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_OP_MODE_CFG,(void *)&modeConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for VI_OP_MODE_CFG\n"); |
| } |
| } |
| |
| // Setting Channel Map configuration for VI module |
| if (numSpeaker == CHANNELS_4) |
| viChannelMapConfg.num_ch = CHANNELS_2 * 2; |
| else |
| viChannelMapConfg.num_ch = numSpeaker * 2; |
| payloadSize = 0; |
| |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_VI_CHANNEL_MAP_CFG,(void *)&viChannelMapConfg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed for CHANNEL_MAP_CFG\n"); |
| } |
| } |
| |
| if (ch == CHANNELS_4) { |
| fp = fopen(PAL_SP_II_TEMP_PATH, "rb"); |
| } |
| else |
| fp = fopen(PAL_SP_I_TEMP_PATH, "rb"); |
| |
| if (fp) { |
| PAL_DBG(LOG_TAG, "Speaker calibrated. Send calibrated value"); |
| for (int i = 0; i < tempCH; i++) { |
| fread(&r0t0Array[i].r0_cali_q24, |
| sizeof(r0t0Array[i].r0_cali_q24), 1, fp); |
| fread(&r0t0Array[i].t0_cali_q6, |
| sizeof(r0t0Array[i].t0_cali_q6), 1, fp); |
| } |
| fclose(fp); |
| } |
| else { |
| PAL_DBG(LOG_TAG, "Speaker not calibrated. Send safe value"); |
| for (int i = 0; i < tempCH; i++) { |
| r0t0Array[i].r0_cali_q24 = MIN_RESISTANCE_SPKR_Q24; |
| r0t0Array[i].t0_cali_q6 = SAFE_SPKR_TEMP_Q6; |
| } |
| } |
| spR0T0confg = (param_id_sp_th_vi_r0t0_cfg_t *)calloc(1, |
| sizeof(param_id_sp_th_vi_r0t0_cfg_t) + |
| sizeof(vi_r0t0_cfg_t) * tempCH); |
| if (!spR0T0confg) { |
| PAL_ERR(LOG_TAG," unable to create speaker config payload\n"); |
| return; |
| } |
| |
| |
| if (numSpeaker == CHANNELS_4) |
| spR0T0confg->num_ch = CHANNELS_2; |
| else |
| spR0T0confg->num_ch = numSpeaker; |
| |
| memcpy(spR0T0confg->r0t0_cfg, r0t0Array, sizeof(vi_r0t0_cfg_t) * |
| spR0T0confg->num_ch); |
| |
| payloadSize = 0; |
| builder->payloadSPConfig(&payload, &payloadSize, miid, |
| PARAM_ID_SP_TH_VI_R0T0_CFG,(void *)spR0T0confg); |
| if (payloadSize) { |
| ret = updateCustomPayload(payload, payloadSize); |
| free(payload); |
| free(spR0T0confg); |
| if (0 != ret) { |
| PAL_ERR(LOG_TAG," updateCustomPayload Failed\n"); |
| } |
| } |
| } |
| exit: |
| if(builder) { |
| delete builder; |
| builder = NULL; |
| } |
| return; |
| } |
| |
| SpeakerFeedback::SpeakerFeedback(struct pal_device *device, |
| std::shared_ptr<ResourceManager> Rm):Device(device, Rm) |
| { |
| struct pal_device_info devinfo = {}; |
| |
| memset(&mDeviceAttr, 0, sizeof(struct pal_device)); |
| memcpy(&mDeviceAttr, device, sizeof(struct pal_device)); |
| rm = Rm; |
| |
| |
| rm->getDeviceInfo(mDeviceAttr.id, PAL_STREAM_PROXY, mDeviceAttr.custom_config.custom_key, &devinfo); |
| numSpeaker = devinfo.channels; |
| } |
| |
| SpeakerFeedback::~SpeakerFeedback() |
| { |
| } |
| |
| int32_t SpeakerFeedback::start() |
| { |
| ResourceManager::isVIRecordStarted = true; |
| // Do the customPayload configuration for VI path and call the Device::start |
| PAL_DBG(LOG_TAG," Feedback start\n"); |
| if (rm->isSpeakerProtectionEnabled) |
| updateVIcustomPayload(); |
| |
| Device::start(); |
| |
| return 0; |
| } |
| |
| int32_t SpeakerFeedback::stop() |
| { |
| ResourceManager::isVIRecordStarted = false; |
| PAL_DBG(LOG_TAG," Feedback stop\n"); |
| Device::stop(); |
| |
| return 0; |
| } |
| |
| std::shared_ptr<Device> SpeakerFeedback::getInstance(struct pal_device *device, |
| std::shared_ptr<ResourceManager> Rm) |
| { |
| PAL_DBG(LOG_TAG," Feedback getInstance\n"); |
| if (!obj) { |
| std::shared_ptr<Device> sp(new SpeakerFeedback(device, Rm)); |
| obj = sp; |
| } |
| return obj; |
| } |
| |
| std::shared_ptr<Device> SpeakerFeedback::getObject() |
| { |
| return obj; |
| } |