| /* |
| * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted (subject to the limitations in the |
| * disclaimer below) provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define LOG_TAG "PAL: Device" |
| |
| #include "Device.h" |
| #include <tinyalsa/asoundlib.h> |
| #include "ResourceManager.h" |
| #include "SessionAlsaUtils.h" |
| #include "Device.h" |
| #include "Speaker.h" |
| #include "SpeakerProtection.h" |
| #include "Headphone.h" |
| #include "USBAudio.h" |
| #include "SpeakerMic.h" |
| #include "Stream.h" |
| #include "HeadsetMic.h" |
| #include "HandsetMic.h" |
| #include "HandsetVaMic.h" |
| #include "HeadsetVaMic.h" |
| #include "Handset.h" |
| #include "Bluetooth.h" |
| #include "DisplayPort.h" |
| #include "RTProxy.h" |
| #include "FMDevice.h" |
| #include "HapticsDev.h" |
| #include "UltrasoundDevice.h" |
| #include "ExtEC.h" |
| #include "ECRefDevice.h" |
| |
| #define MAX_CHANNEL_SUPPORTED 2 |
| #define DEFAULT_OUTPUT_SAMPLING_RATE 48000 |
| #define DEFAULT_OUTPUT_CHANNEL 2 |
| |
| std::shared_ptr<Device> Device::getInstance(struct pal_device *device, |
| std::shared_ptr<ResourceManager> Rm) |
| { |
| if (!device || !Rm) { |
| PAL_ERR(LOG_TAG, "Invalid input parameters"); |
| return NULL; |
| } |
| |
| PAL_VERBOSE(LOG_TAG, "Enter device id %d", device->id); |
| |
| //TBD: decide on supported devices from XML and not in code |
| switch (device->id) { |
| case PAL_DEVICE_NONE: |
| PAL_DBG(LOG_TAG,"device none"); |
| return nullptr; |
| case PAL_DEVICE_OUT_HANDSET: |
| PAL_VERBOSE(LOG_TAG, "handset device"); |
| return Handset::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_SPEAKER: |
| PAL_VERBOSE(LOG_TAG, "speaker device"); |
| return Speaker::getInstance(device, Rm); |
| case PAL_DEVICE_IN_VI_FEEDBACK: |
| PAL_VERBOSE(LOG_TAG, "speaker feedback device"); |
| return SpeakerFeedback::getInstance(device, Rm); |
| case PAL_DEVICE_IN_CPS_FEEDBACK: |
| PAL_VERBOSE(LOG_TAG, "speaker feedback device CPS"); |
| return SpeakerFeedback::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_WIRED_HEADSET: |
| case PAL_DEVICE_OUT_WIRED_HEADPHONE: |
| PAL_VERBOSE(LOG_TAG, "headphone device"); |
| return Headphone::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_USB_DEVICE: |
| case PAL_DEVICE_OUT_USB_HEADSET: |
| case PAL_DEVICE_IN_USB_DEVICE: |
| case PAL_DEVICE_IN_USB_HEADSET: |
| PAL_VERBOSE(LOG_TAG, "USB device"); |
| return USB::getInstance(device, Rm); |
| case PAL_DEVICE_IN_HANDSET_MIC: |
| PAL_VERBOSE(LOG_TAG, "HandsetMic device"); |
| return HandsetMic::getInstance(device, Rm); |
| case PAL_DEVICE_IN_SPEAKER_MIC: |
| PAL_VERBOSE(LOG_TAG, "speakerMic device"); |
| return SpeakerMic::getInstance(device, Rm); |
| case PAL_DEVICE_IN_WIRED_HEADSET: |
| PAL_VERBOSE(LOG_TAG, "HeadsetMic device"); |
| return HeadsetMic::getInstance(device, Rm); |
| case PAL_DEVICE_IN_HANDSET_VA_MIC: |
| PAL_VERBOSE(LOG_TAG, "HandsetVaMic device"); |
| return HandsetVaMic::getInstance(device, Rm); |
| case PAL_DEVICE_IN_BLUETOOTH_SCO_HEADSET: |
| case PAL_DEVICE_OUT_BLUETOOTH_SCO: |
| PAL_VERBOSE(LOG_TAG, "BTSCO device"); |
| return BtSco::getInstance(device, Rm); |
| case PAL_DEVICE_IN_BLUETOOTH_A2DP: |
| case PAL_DEVICE_OUT_BLUETOOTH_A2DP: |
| case PAL_DEVICE_IN_BLUETOOTH_BLE: |
| case PAL_DEVICE_OUT_BLUETOOTH_BLE: |
| case PAL_DEVICE_OUT_BLUETOOTH_BLE_BROADCAST: |
| PAL_VERBOSE(LOG_TAG, "BTA2DP device"); |
| return BtA2dp::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_AUX_DIGITAL: |
| case PAL_DEVICE_OUT_AUX_DIGITAL_1: |
| case PAL_DEVICE_OUT_HDMI: |
| PAL_VERBOSE(LOG_TAG, "Display Port device"); |
| return DisplayPort::getInstance(device, Rm); |
| case PAL_DEVICE_IN_HEADSET_VA_MIC: |
| PAL_VERBOSE(LOG_TAG, "HeadsetVaMic device"); |
| return HeadsetVaMic::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_PROXY: |
| PAL_VERBOSE(LOG_TAG, "RTProxyOut device"); |
| return RTProxyOut::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_HEARING_AID: |
| PAL_VERBOSE(LOG_TAG, "RTProxy Hearing Aid device"); |
| return RTProxyOut::getInstance(device, Rm); |
| case PAL_DEVICE_OUT_HAPTICS_DEVICE: |
| PAL_VERBOSE(LOG_TAG, "Haptics Device"); |
| return HapticsDev::getInstance(device, Rm); |
| case PAL_DEVICE_IN_PROXY: |
| PAL_VERBOSE(LOG_TAG, "RTProxy device"); |
| return RTProxy::getInstance(device, Rm); |
| case PAL_DEVICE_IN_TELEPHONY_RX: |
| PAL_VERBOSE(LOG_TAG, "RTProxy Telephony Rx device"); |
| return RTProxy::getInstance(device, Rm); |
| case PAL_DEVICE_IN_FM_TUNER: |
| PAL_VERBOSE(LOG_TAG, "FM device"); |
| return FMDevice::getInstance(device, Rm); |
| case PAL_DEVICE_IN_ULTRASOUND_MIC: |
| case PAL_DEVICE_OUT_ULTRASOUND: |
| case PAL_DEVICE_OUT_ULTRASOUND_DEDICATED: |
| PAL_VERBOSE(LOG_TAG, "Ultrasound device"); |
| return UltrasoundDevice::getInstance(device, Rm); |
| case PAL_DEVICE_IN_EXT_EC_REF: |
| PAL_VERBOSE(LOG_TAG, "ExtEC device"); |
| return ExtEC::getInstance(device, Rm); |
| case PAL_DEVICE_IN_ECHO_REF: |
| PAL_VERBOSE(LOG_TAG, "Echo ref device"); |
| return ECRefDevice::getInstance(device, Rm); |
| default: |
| PAL_ERR(LOG_TAG,"Unsupported device id %d",device->id); |
| return nullptr; |
| } |
| } |
| |
| std::shared_ptr<Device> Device::getObject(pal_device_id_t dev_id) |
| { |
| |
| switch(dev_id) { |
| case PAL_DEVICE_NONE: |
| PAL_DBG(LOG_TAG,"device none"); |
| return nullptr; |
| case PAL_DEVICE_OUT_HANDSET: |
| PAL_VERBOSE(LOG_TAG, "handset device"); |
| return Handset::getObject(); |
| case PAL_DEVICE_OUT_SPEAKER: |
| PAL_VERBOSE(LOG_TAG, "speaker device"); |
| return Speaker::getObject(); |
| case PAL_DEVICE_IN_VI_FEEDBACK: |
| PAL_VERBOSE(LOG_TAG, "speaker feedback device"); |
| return SpeakerFeedback::getObject(); |
| case PAL_DEVICE_OUT_WIRED_HEADSET: |
| case PAL_DEVICE_OUT_WIRED_HEADPHONE: |
| PAL_VERBOSE(LOG_TAG, "headphone device"); |
| return Headphone::getObject(dev_id); |
| case PAL_DEVICE_OUT_USB_DEVICE: |
| case PAL_DEVICE_OUT_USB_HEADSET: |
| case PAL_DEVICE_IN_USB_DEVICE: |
| case PAL_DEVICE_IN_USB_HEADSET: |
| PAL_VERBOSE(LOG_TAG, "USB device"); |
| return USB::getObject(dev_id); |
| case PAL_DEVICE_OUT_AUX_DIGITAL: |
| case PAL_DEVICE_OUT_AUX_DIGITAL_1: |
| case PAL_DEVICE_OUT_HDMI: |
| PAL_VERBOSE(LOG_TAG, "Display Port device"); |
| return DisplayPort::getObject(dev_id); |
| case PAL_DEVICE_IN_HANDSET_MIC: |
| PAL_VERBOSE(LOG_TAG, "handset mic device"); |
| return HandsetMic::getObject(); |
| case PAL_DEVICE_IN_SPEAKER_MIC: |
| PAL_VERBOSE(LOG_TAG, "speaker mic device"); |
| return SpeakerMic::getObject(); |
| case PAL_DEVICE_IN_WIRED_HEADSET: |
| PAL_VERBOSE(LOG_TAG, "headset mic device"); |
| return HeadsetMic::getObject(); |
| case PAL_DEVICE_OUT_BLUETOOTH_A2DP: |
| case PAL_DEVICE_IN_BLUETOOTH_A2DP: |
| case PAL_DEVICE_OUT_BLUETOOTH_BLE: |
| case PAL_DEVICE_IN_BLUETOOTH_BLE: |
| case PAL_DEVICE_OUT_BLUETOOTH_BLE_BROADCAST: |
| PAL_VERBOSE(LOG_TAG, "BT A2DP device %d", dev_id); |
| return BtA2dp::getObject(dev_id); |
| case PAL_DEVICE_OUT_BLUETOOTH_SCO: |
| case PAL_DEVICE_IN_BLUETOOTH_SCO_HEADSET: |
| PAL_VERBOSE(LOG_TAG, "BT SCO device %d", dev_id); |
| return BtSco::getObject(dev_id); |
| case PAL_DEVICE_OUT_PROXY: |
| case PAL_DEVICE_OUT_HEARING_AID: |
| PAL_VERBOSE(LOG_TAG, "RTProxyOut device %d", dev_id); |
| return RTProxyOut::getObject(); |
| case PAL_DEVICE_IN_PROXY: |
| case PAL_DEVICE_IN_TELEPHONY_RX: |
| PAL_VERBOSE(LOG_TAG, "RTProxy device %d", dev_id); |
| return RTProxy::getObject(); |
| case PAL_DEVICE_IN_FM_TUNER: |
| PAL_VERBOSE(LOG_TAG, "FMDevice %d", dev_id); |
| return FMDevice::getObject(); |
| case PAL_DEVICE_IN_ULTRASOUND_MIC: |
| case PAL_DEVICE_OUT_ULTRASOUND: |
| case PAL_DEVICE_OUT_ULTRASOUND_DEDICATED: |
| PAL_VERBOSE(LOG_TAG, "Ultrasound device %d", dev_id); |
| return UltrasoundDevice::getObject(dev_id); |
| case PAL_DEVICE_IN_EXT_EC_REF: |
| PAL_VERBOSE(LOG_TAG, "ExtEC device %d", dev_id); |
| return ExtEC::getObject(); |
| case PAL_DEVICE_IN_HANDSET_VA_MIC: |
| PAL_VERBOSE(LOG_TAG, "Handset VA Mic device %d", dev_id); |
| return HandsetVaMic::getObject(); |
| case PAL_DEVICE_IN_HEADSET_VA_MIC: |
| PAL_VERBOSE(LOG_TAG, "Headset VA Mic device %d", dev_id); |
| return HeadsetVaMic::getObject(); |
| case PAL_DEVICE_IN_ECHO_REF: |
| PAL_VERBOSE(LOG_TAG, "Echo ref device %d", dev_id); |
| return ECRefDevice::getObject(); |
| case PAL_DEVICE_OUT_HAPTICS_DEVICE: |
| PAL_VERBOSE(LOG_TAG, "Haptics device %d", dev_id); |
| return HapticsDev::getObject(); |
| default: |
| PAL_ERR(LOG_TAG,"Unsupported device id %d",dev_id); |
| return nullptr; |
| } |
| } |
| |
| Device::Device(struct pal_device *device, std::shared_ptr<ResourceManager> Rm) |
| { |
| rm = Rm; |
| |
| memset(&deviceAttr, 0, sizeof(struct pal_device)); |
| ar_mem_cpy(&deviceAttr, sizeof(struct pal_device), device, |
| sizeof(struct pal_device)); |
| |
| mPALDeviceName.clear(); |
| customPayload = NULL; |
| customPayloadSize = 0; |
| strlcpy(mSndDeviceName, "", DEVICE_NAME_MAX_SIZE); |
| mCurrentPriority = MIN_USECASE_PRIORITY; |
| PAL_DBG(LOG_TAG,"device instance for id %d created", device->id); |
| |
| } |
| |
| Device::Device() |
| { |
| strlcpy(mSndDeviceName, "", DEVICE_NAME_MAX_SIZE); |
| mCurrentPriority = MIN_USECASE_PRIORITY; |
| mPALDeviceName.clear(); |
| } |
| |
| Device::~Device() |
| { |
| if (customPayload) |
| free(customPayload); |
| |
| customPayload = NULL; |
| customPayloadSize = 0; |
| mCurrentPriority = MIN_USECASE_PRIORITY; |
| PAL_DBG(LOG_TAG,"device instance for id %d destroyed", deviceAttr.id); |
| } |
| |
| int Device::getDeviceAttributes(struct pal_device *dattr, Stream* streamHandle) |
| { |
| struct pal_device *strDevAttr; |
| |
| if (!dattr) { |
| PAL_ERR(LOG_TAG, "Invalid device attributes"); |
| return -EINVAL; |
| } |
| |
| ar_mem_cpy(dattr, sizeof(struct pal_device), |
| &deviceAttr, sizeof(struct pal_device)); |
| |
| /* overwrite custom key if stream is specified */ |
| mDeviceMutex.lock(); |
| if (streamHandle != NULL) { |
| if (mStreamDevAttr.empty()) { |
| PAL_ERR(LOG_TAG,"empty device attr for device %d", getSndDeviceId()); |
| mDeviceMutex.unlock(); |
| return 0; |
| } |
| for (auto it = mStreamDevAttr.begin(); it != mStreamDevAttr.end(); ++it) { |
| Stream* curStream = (*it).second.first; |
| if (curStream == streamHandle) { |
| PAL_DBG(LOG_TAG,"found entry for stream: %pK", streamHandle); |
| strDevAttr = (*it).second.second; |
| strlcpy(dattr->custom_config.custom_key, strDevAttr->custom_config.custom_key, |
| PAL_MAX_CUSTOM_KEY_SIZE); |
| break; |
| } |
| } |
| } |
| mDeviceMutex.unlock(); |
| |
| return 0; |
| } |
| |
| int Device::getCodecConfig(struct pal_media_config *config __unused) |
| { |
| return 0; |
| } |
| |
| |
| int Device::getDefaultConfig(pal_param_device_capability_t capability __unused) |
| { |
| return 0; |
| } |
| |
| int Device::setDeviceAttributes(struct pal_device dattr) |
| { |
| int status = 0; |
| |
| mDeviceMutex.lock(); |
| PAL_INFO(LOG_TAG,"DeviceAttributes for Device Id %d updated", dattr.id); |
| ar_mem_cpy(&deviceAttr, sizeof(struct pal_device), &dattr, |
| sizeof(struct pal_device)); |
| |
| mDeviceMutex.unlock(); |
| return status; |
| } |
| |
| int Device::updateCustomPayload(void *payload, size_t size) |
| { |
| if (!customPayloadSize) { |
| customPayload = calloc(1, size); |
| } else { |
| customPayload = realloc(customPayload, customPayloadSize + size); |
| } |
| |
| if (!customPayload) { |
| PAL_ERR(LOG_TAG, "failed to allocate memory for custom payload"); |
| return -ENOMEM; |
| } |
| |
| memcpy((uint8_t *)customPayload + customPayloadSize, payload, size); |
| customPayloadSize += size; |
| PAL_INFO(LOG_TAG, "customPayloadSize = %zu", customPayloadSize); |
| return 0; |
| } |
| |
| void* Device::getCustomPayload() |
| { |
| return customPayload; |
| } |
| |
| size_t Device::getCustomPayloadSize() |
| { |
| return customPayloadSize; |
| } |
| |
| int Device::getSndDeviceId() |
| { |
| PAL_VERBOSE(LOG_TAG,"Device Id %d acquired", deviceAttr.id); |
| return deviceAttr.id; |
| } |
| |
| void Device::getCurrentSndDevName(char *name){ |
| strlcpy(name, mSndDeviceName, DEVICE_NAME_MAX_SIZE); |
| } |
| |
| std::string Device::getPALDeviceName() |
| { |
| PAL_VERBOSE(LOG_TAG, "Device name %s acquired", mPALDeviceName.c_str()); |
| return mPALDeviceName; |
| } |
| |
| int Device::init(pal_param_device_connection_t device_conn __unused) |
| { |
| return 0; |
| } |
| |
| int Device::deinit(pal_param_device_connection_t device_conn __unused) |
| { |
| return 0; |
| } |
| |
| int Device::open() |
| { |
| int status = 0; |
| |
| mDeviceMutex.lock(); |
| mPALDeviceName = rm->getPALDeviceName(this->deviceAttr.id); |
| PAL_INFO(LOG_TAG, "Enter. deviceCount %d for device id %d (%s)", deviceCount, |
| this->deviceAttr.id, mPALDeviceName.c_str()); |
| |
| devObj = Device::getInstance(&deviceAttr, rm); |
| |
| if (deviceCount == 0) { |
| std::string backEndName; |
| rm->getBackendName(this->deviceAttr.id, backEndName); |
| if (strlen(backEndName.c_str())) { |
| SessionAlsaUtils::setDeviceMediaConfig(rm, backEndName, &(this->deviceAttr)); |
| } |
| |
| status = rm->getAudioRoute(&audioRoute); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Failed to get the audio_route address status %d", status); |
| goto exit; |
| } |
| status = rm->getSndDeviceName(deviceAttr.id , mSndDeviceName); //getsndName |
| |
| if (!UpdatedSndName.empty()) { |
| PAL_DBG(LOG_TAG,"Update sndName %s, currently %s", |
| UpdatedSndName.c_str(), mSndDeviceName); |
| strlcpy(mSndDeviceName, UpdatedSndName.c_str(), DEVICE_NAME_MAX_SIZE); |
| } |
| |
| PAL_DBG(LOG_TAG, "audio_route %pK SND device name %s", audioRoute, mSndDeviceName); |
| if (0 != status) { |
| PAL_ERR(LOG_TAG, "Failed to obtain the device name from ResourceManager status %d", status); |
| goto exit; |
| } |
| enableDevice(audioRoute, mSndDeviceName); |
| } |
| ++deviceCount; |
| |
| exit: |
| PAL_INFO(LOG_TAG, "Exit. deviceCount %d for device id %d (%s), exit status: %d", deviceCount, |
| this->deviceAttr.id, mPALDeviceName.c_str(), status); |
| mDeviceMutex.unlock(); |
| return status; |
| } |
| |
| int Device::close() |
| { |
| int status = 0; |
| mDeviceMutex.lock(); |
| PAL_INFO(LOG_TAG, "Enter. deviceCount %d for device id %d (%s)", deviceCount, |
| this->deviceAttr.id, mPALDeviceName.c_str()); |
| if (deviceCount > 0) { |
| --deviceCount; |
| |
| if (deviceCount == 0) { |
| PAL_DBG(LOG_TAG, "Disabling device %d with snd dev %s", deviceAttr.id, mSndDeviceName); |
| disableDevice(audioRoute, mSndDeviceName); |
| mCurrentPriority = MIN_USECASE_PRIORITY; |
| deviceStartStopCount = 0; |
| if(rm->num_proxy_channels != 0) |
| rm->num_proxy_channels = 0; |
| } |
| } |
| PAL_INFO(LOG_TAG, "Exit. deviceCount %d for device id %d (%s), exit status %d", deviceCount, |
| this->deviceAttr.id, mPALDeviceName.c_str(), status); |
| mDeviceMutex.unlock(); |
| return status; |
| } |
| |
| int Device::prepare() |
| { |
| return 0; |
| } |
| |
| int Device::start() |
| { |
| int status = 0; |
| |
| mDeviceMutex.lock(); |
| status = start_l(); |
| mDeviceMutex.unlock(); |
| |
| return status; |
| } |
| |
| // must be called with mDeviceMutex held |
| int Device::start_l() |
| { |
| int status = 0; |
| std::string backEndName; |
| |
| PAL_DBG(LOG_TAG, "Enter. deviceCount %d deviceStartStopCount %d" |
| " for device id %d (%s)", deviceCount, deviceStartStopCount, |
| this->deviceAttr.id, mPALDeviceName.c_str()); |
| if (0 == deviceStartStopCount) { |
| rm->getBackendName(this->deviceAttr.id, backEndName); |
| if (!strlen(backEndName.c_str())) { |
| PAL_ERR(LOG_TAG, "Error: Backend name not defined for %d in xml file\n", this->deviceAttr.id); |
| status = -EINVAL; |
| goto exit; |
| } |
| if (rm->isPluginPlaybackDevice(this->deviceAttr.id)) { |
| /* avoid setting invalid device attribute and the failure of starting device |
| * when plugin device disconnects. Audio Policy Manager will go on finishing device switch. |
| */ |
| if (this->deviceAttr.config.sample_rate == 0) { |
| PAL_DBG(LOG_TAG, "overwrite samplerate to default value"); |
| this->deviceAttr.config.sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| } |
| if (this->deviceAttr.config.bit_width == 0) { |
| PAL_DBG(LOG_TAG, "overwrite bit width to default value"); |
| this->deviceAttr.config.bit_width = 16; |
| } |
| if (this->deviceAttr.config.ch_info.channels == 0) { |
| PAL_DBG(LOG_TAG, "overwrite channel to default value"); |
| this->deviceAttr.config.ch_info.channels = DEFAULT_OUTPUT_CHANNEL; |
| this->deviceAttr.config.ch_info.ch_map[0] = PAL_CHMAP_CHANNEL_FL; |
| this->deviceAttr.config.ch_info.ch_map[1] = PAL_CHMAP_CHANNEL_FR; |
| } |
| if (this->deviceAttr.config.aud_fmt_id == 0) { |
| PAL_DBG(LOG_TAG, "overwrite aud_fmt_id to default value"); |
| this->deviceAttr.config.aud_fmt_id = PAL_AUDIO_FMT_PCM_S16_LE; |
| } |
| } |
| SessionAlsaUtils::setDeviceMediaConfig(rm, backEndName, &(this->deviceAttr)); |
| |
| if (customPayloadSize) { |
| status = SessionAlsaUtils::setDeviceCustomPayload(rm, backEndName, |
| customPayload, customPayloadSize); |
| if (status) |
| PAL_ERR(LOG_TAG, "Error: Dev setParam failed for %d\n", |
| this->deviceAttr.id); |
| } |
| } |
| deviceStartStopCount++; |
| exit : |
| PAL_DBG(LOG_TAG, "Exit, status %d", status); |
| return status; |
| } |
| |
| int Device::stop() |
| { |
| int status = 0; |
| |
| mDeviceMutex.lock(); |
| status = stop_l(); |
| mDeviceMutex.unlock(); |
| |
| return status; |
| } |
| |
| // must be called with mDeviceMutex held |
| int Device::stop_l() |
| { |
| PAL_DBG(LOG_TAG, "Enter. deviceCount %d deviceStartStopCount %d" |
| " for device id %d (%s)", deviceCount, deviceStartStopCount, |
| this->deviceAttr.id, mPALDeviceName.c_str()); |
| |
| if (deviceStartStopCount > 0) { |
| --deviceStartStopCount; |
| } |
| |
| return 0; |
| } |
| |
| int32_t Device::setDeviceParameter(uint32_t param_id __unused, void *param __unused) |
| { |
| return 0; |
| } |
| |
| int32_t Device::getDeviceParameter(uint32_t param_id __unused, void **param __unused) |
| { |
| return 0; |
| } |
| |
| int32_t Device::setParameter(uint32_t param_id __unused, void *param __unused) |
| { |
| return 0; |
| } |
| |
| int32_t Device::getParameter(uint32_t param_id __unused, void **param __unused) |
| { |
| return 0; |
| } |
| |
| int32_t Device::configureDeviceClockSrc(char const *mixerStrClockSrc, const uint32_t clockSrc) |
| { |
| struct mixer *hwMixerHandle = NULL; |
| struct mixer_ctl *clockSrcCtrl = NULL; |
| int32_t ret = 0; |
| |
| if (!mixerStrClockSrc) { |
| PAL_ERR(LOG_TAG, "Invalid argument - mixerStrClockSrc"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = rm->getHwAudioMixer(&hwMixerHandle); |
| if (ret) { |
| PAL_ERR(LOG_TAG, "getHwAudioMixer() failed %d", ret); |
| goto exit; |
| } |
| |
| /* Hw mixer control registration is optional in case |
| * clock source selection is not required |
| */ |
| clockSrcCtrl = mixer_get_ctl_by_name(hwMixerHandle, mixerStrClockSrc); |
| if (!clockSrcCtrl) { |
| PAL_DBG(LOG_TAG, "%s hw mixer control not identified", mixerStrClockSrc); |
| goto exit; |
| } |
| |
| PAL_DBG(LOG_TAG, "HwMixer set %s = %d", mixerStrClockSrc, clockSrc); |
| ret = mixer_ctl_set_value(clockSrcCtrl, 0, clockSrc); |
| if (ret) |
| PAL_ERR(LOG_TAG, "HwMixer set %s = %d failed", mixerStrClockSrc, clockSrc); |
| |
| exit: |
| return ret; |
| } |
| |
| /* insert inDevAttr if incoming device has higher priority */ |
| bool Device::compareStreamDevAttr(const struct pal_device *inDevAttr, |
| const struct pal_device_info *inDevInfo, |
| struct pal_device *curDevAttr, |
| const struct pal_device_info *curDevInfo) |
| { |
| bool insert = false; |
| |
| if (!inDevAttr || !inDevInfo || !curDevAttr || !curDevInfo) { |
| PAL_ERR(LOG_TAG, "invalid pointer cannot update attr"); |
| goto exit; |
| } |
| |
| /* check snd device name */ |
| if (inDevInfo->sndDevName_overwrite && !curDevInfo->sndDevName_overwrite) { |
| PAL_DBG(LOG_TAG, "snd overwrite found"); |
| insert = true; |
| goto exit; |
| } |
| |
| |
| /* check channels */ |
| if (inDevInfo->channels_overwrite && !curDevInfo->channels_overwrite) { |
| PAL_DBG(LOG_TAG, "ch overwrite found"); |
| insert = true; |
| goto exit; |
| } else if ((inDevInfo->channels_overwrite && curDevInfo->channels_overwrite) || |
| (!inDevInfo->channels_overwrite && !curDevInfo->channels_overwrite)) { |
| if (inDevAttr->config.ch_info.channels > curDevAttr->config.ch_info.channels) { |
| PAL_DBG(LOG_TAG, "incoming dev has higher ch count, in ch: %d, cur ch: %d", |
| inDevAttr->config.ch_info.channels, curDevAttr->config.ch_info.channels); |
| insert = true; |
| goto exit; |
| } |
| } |
| |
| /* check sample rate */ |
| if (inDevInfo->samplerate_overwrite && !curDevInfo->samplerate_overwrite) { |
| PAL_DBG(LOG_TAG, "sample rate overwrite found"); |
| insert = true; |
| goto exit; |
| } else if ((inDevInfo->samplerate_overwrite && curDevInfo->samplerate_overwrite) && |
| (inDevAttr->config.sample_rate > curDevAttr->config.sample_rate)) { |
| PAL_DBG(LOG_TAG, "both have sr overwrite set, incoming dev has higher sr: %d, cur sr: %d", |
| inDevAttr->config.sample_rate, curDevAttr->config.sample_rate); |
| insert = true; |
| goto exit; |
| } else if (!inDevInfo->samplerate_overwrite && !curDevInfo->samplerate_overwrite) { |
| if ((inDevAttr->config.sample_rate % SAMPLINGRATE_44K == 0) && |
| (curDevAttr->config.sample_rate % SAMPLINGRATE_44K != 0)) { |
| PAL_DBG(LOG_TAG, "incoming sample rate is 44.1K"); |
| insert = true; |
| goto exit; |
| } else if (inDevAttr->config.sample_rate > curDevAttr->config.sample_rate) { |
| if (curDevAttr->config.sample_rate % SAMPLINGRATE_44K == 0 && |
| inDevAttr->config.sample_rate % SAMPLINGRATE_48K == 0) { |
| PAL_DBG(LOG_TAG, "current stream is running at 44.1KHz"); |
| insert = false; |
| } else { |
| PAL_DBG(LOG_TAG, "incoming dev has higher sr: %d, cur sr: %d", |
| inDevAttr->config.sample_rate, curDevAttr->config.sample_rate); |
| insert = true; |
| goto exit; |
| } |
| } |
| } |
| |
| /* check streams bit width */ |
| if (inDevInfo->bit_width_overwrite && !curDevInfo->bit_width_overwrite) { |
| if (isPalPCMFormat(inDevAttr->config.aud_fmt_id)) { |
| PAL_DBG(LOG_TAG, "bit width overwrite found"); |
| insert = true; |
| goto exit; |
| } |
| } else if ((inDevInfo->bit_width_overwrite && curDevInfo->bit_width_overwrite) || |
| (!inDevInfo->bit_width_overwrite && !curDevInfo->bit_width_overwrite)) { |
| if (isPalPCMFormat(inDevAttr->config.aud_fmt_id) && |
| (inDevAttr->config.bit_width > curDevAttr->config.bit_width)) { |
| PAL_DBG(LOG_TAG, "incoming dev has higher bw: %d, cur bw: %d", |
| inDevAttr->config.bit_width, curDevAttr->config.bit_width); |
| insert = true; |
| goto exit; |
| } |
| } |
| |
| exit: |
| return insert; |
| } |
| |
| int Device::insertStreamDeviceAttr(struct pal_device *inDevAttr, |
| Stream* streamHandle) |
| { |
| pal_device_info inDevInfo, curDevInfo; |
| struct pal_device *curDevAttr, *newDevAttr; |
| std::string key = ""; |
| pal_stream_attributes strAttr; |
| |
| if (!streamHandle) { |
| PAL_ERR(LOG_TAG, "invalid stream handle"); |
| return -EINVAL; |
| } |
| if (!inDevAttr) { |
| PAL_ERR(LOG_TAG, "invalid dev cannot get device attr"); |
| return -EINVAL; |
| } |
| |
| streamHandle->getStreamAttributes(&strAttr); |
| |
| newDevAttr = (struct pal_device *) calloc(1, sizeof(struct pal_device)); |
| if (!newDevAttr) { |
| PAL_ERR(LOG_TAG, "failed to allocate memory for pal device"); |
| return -ENOMEM; |
| } |
| |
| key = inDevAttr->custom_config.custom_key; |
| |
| /* get the incoming stream dev info */ |
| rm->getDeviceInfo(inDevAttr->id, strAttr.type, key, &inDevInfo); |
| |
| ar_mem_cpy(newDevAttr, sizeof(struct pal_device), inDevAttr, |
| sizeof(struct pal_device)); |
| |
| mDeviceMutex.lock(); |
| if (mStreamDevAttr.empty()) { |
| mStreamDevAttr.insert(std::make_pair(inDevInfo.priority, std::make_pair(streamHandle, newDevAttr))); |
| PAL_DBG(LOG_TAG, "insert the first device attribute"); |
| goto exit; |
| } |
| |
| /* |
| * this map is sorted with stream priority, and the top one will always |
| * be with highest stream priority. |
| * <priority(it.first):<stream_attr(it.second.first):pal_device(it.second.second)>> |
| * If stream priority is the same, new attributes will be inserted to the map with: |
| * 1. device attr with snd name overwrite flag set |
| * 2. device attr with channel overwrite set, or a higher channel count |
| * 3. device attr with sample rate overwrite set, or a higher sampling rate |
| * 4. device attr with bit depth overwrite set, or a higher bit depth |
| */ |
| for (auto it = mStreamDevAttr.begin(); ; it++) { |
| /* get the current stream dev info to be compared with incoming device */ |
| struct pal_stream_attributes curStrAttr; |
| if (it != mStreamDevAttr.end()) { |
| (*it).second.first->getStreamAttributes(&curStrAttr); |
| curDevAttr = (*it).second.second; |
| rm->getDeviceInfo(curDevAttr->id, curStrAttr.type, |
| curDevAttr->custom_config.custom_key, &curDevInfo); |
| } |
| |
| if (it == mStreamDevAttr.end()) { |
| /* if reaches to the end, then the new dev attr will be inserted to the end */ |
| PAL_DBG(LOG_TAG, "incoming stream: %d has lowest priority, insert to the end", strAttr.type); |
| mStreamDevAttr.insert(std::make_pair(inDevInfo.priority, std::make_pair(streamHandle, newDevAttr))); |
| break; |
| } else if (inDevInfo.priority < (*it).first) { |
| /* insert if incoming stream has higher priority than current */ |
| mStreamDevAttr.insert(it, std::make_pair(inDevInfo.priority, std::make_pair(streamHandle, newDevAttr))); |
| break; |
| } else if (inDevInfo.priority == (*it).first) { |
| /* if stream priority is the same, check attributes priority */ |
| if (compareStreamDevAttr(inDevAttr, &inDevInfo, curDevAttr, &curDevInfo)) { |
| PAL_DBG(LOG_TAG, "incoming stream: %d has higher priority than cur stream %d", |
| strAttr.type, curStrAttr.type); |
| mStreamDevAttr.insert(it, std::make_pair(inDevInfo.priority, std::make_pair(streamHandle, newDevAttr))); |
| break; |
| } |
| } |
| } |
| |
| exit: |
| PAL_DBG(LOG_TAG, "dev: %d attr inserted are: priority: 0x%x, stream type: %d, ch: %d," |
| " sr: %d, bit_width: %d, fmt: %d, sndDev: %s, custom_key: %s", |
| getSndDeviceId(), inDevInfo.priority, strAttr.type, |
| newDevAttr->config.ch_info.channels, |
| newDevAttr->config.sample_rate, |
| newDevAttr->config.bit_width, |
| newDevAttr->config.aud_fmt_id, |
| newDevAttr->sndDevName, |
| newDevAttr->custom_config.custom_key); |
| |
| #if DUMP_DEV_ATTR |
| PAL_DBG(LOG_TAG, "======dump StreamDevAttr Inserted dev: %d ======", getSndDeviceId()); |
| int i = 0; |
| for (auto it = mStreamDevAttr.begin(); it != mStreamDevAttr.end(); it++) { |
| pal_stream_attributes dumpstrAttr; |
| uint32_t dumpPriority = (*it).first; |
| (*it).second.first->getStreamAttributes(&dumpstrAttr); |
| struct pal_device *dumpDevAttr = (*it).second.second; |
| PAL_DBG(LOG_TAG, "entry: %d", i); |
| PAL_DBG(LOG_TAG, "str pri: 0x%x, str type: %d, ch %d, sr %d, bit_width %d," |
| " fmt %d, sndDev: %s, custom_key: %s", |
| dumpPriority, dumpstrAttr.type, |
| dumpDevAttr->config.ch_info.channels, |
| dumpDevAttr->config.sample_rate, |
| dumpDevAttr->config.bit_width, |
| dumpDevAttr->config.aud_fmt_id, |
| dumpDevAttr->sndDevName, |
| dumpDevAttr->custom_config.custom_key); |
| i++; |
| } |
| #endif |
| |
| mDeviceMutex.unlock(); |
| return 0; |
| } |
| |
| void Device::removeStreamDeviceAttr(Stream* streamHandle) |
| { |
| mDeviceMutex.lock(); |
| if (mStreamDevAttr.empty()) { |
| PAL_ERR(LOG_TAG, "empty device attr for device %d", getSndDeviceId()); |
| mDeviceMutex.unlock(); |
| return; |
| } |
| |
| for (auto it = mStreamDevAttr.begin(); it != mStreamDevAttr.end(); it++) { |
| Stream* curStream = (*it).second.first; |
| if (curStream == streamHandle) { |
| uint32_t priority = (*it).first; |
| pal_stream_attributes strAttr; |
| (*it).second.first->getStreamAttributes(&strAttr); |
| pal_device *devAttr = (*it).second.second; |
| PAL_DBG(LOG_TAG, "found entry for stream:%d", strAttr.type); |
| PAL_DBG(LOG_TAG, "dev: %d attr removed are: priority: 0x%x, stream type: %d, ch: %d," |
| " sr: %d, bit_width: %d, fmt: %d, sndDev: %s, custom_key: %s", |
| getSndDeviceId(), priority, strAttr.type, |
| devAttr->config.ch_info.channels, |
| devAttr->config.sample_rate, |
| devAttr->config.bit_width, |
| devAttr->config.aud_fmt_id, |
| devAttr->sndDevName, |
| devAttr->custom_config.custom_key); |
| free((*it).second.second); |
| mStreamDevAttr.erase(it); |
| break; |
| } |
| } |
| |
| #if DUMP_DEV_ATTR |
| PAL_DBG(LOG_TAG, "=====dump StreamDevAttr after removing dev: %d ======", getSndDeviceId()); |
| int i = 0; |
| for (auto it = mStreamDevAttr.begin(); it != mStreamDevAttr.end(); it++) { |
| pal_stream_attributes dumpstrAttr; |
| uint32_t dumpPriority = (*it).first; |
| (*it).second.first->getStreamAttributes(&dumpstrAttr); |
| struct pal_device *dumpDevAttr = (*it).second.second; |
| PAL_DBG(LOG_TAG, "entry: %d", i); |
| PAL_DBG(LOG_TAG, "str pri: 0x%x, str type: %d, ch %d, sr %d, bit_width %d," |
| " fmt %d, sndDev: %s, custom_key: %s", |
| dumpPriority, dumpstrAttr.type, |
| dumpDevAttr->config.ch_info.channels, |
| dumpDevAttr->config.sample_rate, |
| dumpDevAttr->config.bit_width, |
| dumpDevAttr->config.aud_fmt_id, |
| dumpDevAttr->sndDevName, |
| dumpDevAttr->custom_config.custom_key); |
| i++; |
| } |
| #endif |
| mDeviceMutex.unlock(); |
| } |
| |
| int Device::getTopPriorityDeviceAttr(struct pal_device *deviceAttr, uint32_t *streamPrio) |
| { |
| mDeviceMutex.lock(); |
| if (mStreamDevAttr.empty()) { |
| PAL_ERR(LOG_TAG, "empty device attr for device %d", getSndDeviceId()); |
| mDeviceMutex.unlock(); |
| return -EINVAL; |
| } |
| |
| auto it = mStreamDevAttr.begin(); |
| *streamPrio = (*it).first; |
| ar_mem_cpy(deviceAttr, sizeof(struct pal_device), |
| (*it).second.second, sizeof(struct pal_device)); |
| /* update snd dev name */ |
| std::string sndDevName(deviceAttr->sndDevName); |
| rm->updateSndName(deviceAttr->id, sndDevName); |
| /* update sample rate if it's valid */ |
| if (mSampleRate) |
| deviceAttr->config.sample_rate = mSampleRate; |
| if (mBitWidth) { |
| deviceAttr->config.bit_width = mBitWidth; |
| deviceAttr->config.aud_fmt_id = rm->getAudioFmt(mBitWidth); |
| } |
| #if DUMP_DEV_ATTR |
| pal_stream_attributes dumpstrAttr; |
| (*it).second.first->getStreamAttributes(&dumpstrAttr); |
| PAL_DBG(LOG_TAG, "======dump StreamDevAttr Retrieved dev: %d ======", getSndDeviceId()); |
| PAL_DBG(LOG_TAG, "str pri: 0x%x, str type: %d, ch %d, sr %d, bit_width %d," |
| " fmt %d, sndDev: %s, custom_key: %s", |
| (*it).first, dumpstrAttr.type, |
| deviceAttr->config.ch_info.channels, |
| deviceAttr->config.sample_rate, |
| deviceAttr->config.bit_width, |
| deviceAttr->config.aud_fmt_id, |
| deviceAttr->sndDevName, |
| deviceAttr->custom_config.custom_key); |
| #endif |
| |
| mDeviceMutex.unlock(); |
| return 0; |
| } |