| /* |
| * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #define LOG_TAG "AGM: graph" |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <dirent.h> |
| #include <dlfcn.h> |
| #include <unistd.h> |
| #include "gsl_intf.h" |
| #include <agm/graph.h> |
| #include <agm/graph_module.h> |
| #include <agm/metadata.h> |
| #include <agm/utils.h> |
| |
| #ifdef DYNAMIC_LOG_ENABLED |
| #include <log_xml_parser.h> |
| #define LOG_MASK AGM_MOD_FILE_GRAPH |
| #include <log_utils.h> |
| #endif |
| |
| #define DEVICE_RX 0 |
| #define DEVICE_TX 1 |
| #define FILE_PATH_EXTN_MAX_SIZE 80 |
| #define ACDB_PATH_MAX_LENGTH 50 |
| |
| #define TAGGED_MOD_SIZE_BYTES 1024 |
| |
| |
| /* TODO: remove this later after including in spf header files */ |
| #define PARAM_ID_SOFT_PAUSE_START 0x800102e |
| #define PARAM_ID_SOFT_PAUSE_RESUME 0x800102f |
| |
| #define CONVX(x) #x |
| #define CONV_TO_STRING(x) CONVX(x) |
| |
| #define ADD_MODULE(x, y) \ |
| ({ \ |
| module_info_t *add_mod = NULL;\ |
| add_mod = calloc(1, sizeof(module_info_t));\ |
| if (add_mod != NULL) {\ |
| *add_mod = x;\ |
| if (y != NULL) add_mod->dev_obj = y; \ |
| list_add_tail(&graph_obj->tagged_mod_list, &add_mod->list);\ |
| } \ |
| add_mod;\ |
| }) |
| |
| typedef struct module_info_link_list { |
| module_info_t *data; |
| struct listnode tagged_list; |
| }module_info_link_list_t; |
| |
| static char acdb_path[ACDB_PATH_MAX_LENGTH]; |
| |
| static int get_acdb_files_from_directory(const char* acdb_files_path, |
| struct gsl_acdb_data_files *data_files) |
| { |
| int result = 0; |
| int ret = 0; |
| int i = 0; |
| DIR *dir_fp = NULL; |
| struct dirent *dentry; |
| |
| dir_fp = opendir(acdb_files_path); |
| if (dir_fp == NULL) { |
| AGM_LOGE("cannot open acdb path %s\n", acdb_files_path); |
| ret = EINVAL; |
| goto done; |
| } |
| |
| /* search directory for .acdb files */ |
| while ((dentry = readdir(dir_fp)) != NULL) { |
| if ((strstr(dentry->d_name, ".acdb") != NULL) || |
| (strstr(dentry->d_name, ".qwsp") != NULL)) { |
| if (data_files->num_files >= GSL_MAX_NUM_OF_ACDB_FILES) { |
| AGM_LOGE("Reached max num of files, %d!\n", i); |
| break; |
| } |
| result = snprintf( |
| data_files->acdbFiles[i].fileName, |
| sizeof(data_files->acdbFiles[i].fileName), |
| "%s/%s", acdb_files_path, dentry->d_name); |
| if ((result < 0) || |
| (result >= (int)sizeof(data_files->acdbFiles[i].fileName))) { |
| AGM_LOGE("snprintf failed: %s/%s, err %d\n", |
| acdb_files_path, |
| data_files->acdbFiles[i].fileName, |
| result); |
| ret = -EINVAL; |
| break; |
| } |
| data_files->acdbFiles[i].fileNameLen = |
| (uint32_t)strlen(data_files->acdbFiles[i].fileName); |
| AGM_LOGI("Load file: %s\n", data_files->acdbFiles[i].fileName); |
| i++; |
| } |
| } |
| |
| if (i == 0) |
| AGM_LOGE("No .acdb files found in %s!\n", acdb_files_path); |
| |
| data_files->num_files = i; |
| |
| closedir(dir_fp); |
| done: |
| return ret; |
| } |
| |
| #define PULL_PUSH_SHMEM_ENDPOINT SHMEM_ENDPOINT /** Temp: till pull mode keys are defined */ |
| int configure_buffer_params(struct graph_obj *gph_obj, |
| struct session_obj *sess_obj) |
| { |
| struct gsl_cmd_configure_read_write_params buf_config = {0}; |
| int ret = 0; |
| size_t size = 0; |
| enum gsl_cmd_id cmd_id; |
| enum agm_data_mode mode = sess_obj->stream_config.data_mode; |
| struct agm_buffer_config buffer_config = {0}; |
| |
| if (gph_obj == NULL){ |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| if (gph_obj->is_config_buf_params_done) { |
| AGM_LOGD("configure buf params already done"); |
| return 0; |
| } |
| |
| AGM_LOGD("Enter"); |
| /* |
| *In case of non-tunnel mode we configure |
| *read and write buffer params together |
| */ |
| if ((sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) && |
| (sess_obj->stream_config.dir == (RX | TX))) { |
| |
| /*configure read params*/ |
| AGM_LOGD("read params: mode %d sess buf_sz %zu num_bufs %d metadata %d \n", |
| mode, sess_obj->in_buffer_config.size, |
| sess_obj->in_buffer_config.count, |
| sess_obj->in_buffer_config.max_metadata_size); |
| |
| buf_config.start_threshold = sess_obj->stream_config.start_threshold; |
| buf_config.stop_threshold = sess_obj->stream_config.stop_threshold; |
| buf_config.buff_size = (uint32_t)sess_obj->in_buffer_config.size; |
| buf_config.num_buffs = sess_obj->in_buffer_config.count; |
| buf_config.max_metadata_size = sess_obj->in_buffer_config.max_metadata_size; |
| if (mode == AGM_DATA_BLOCKING) |
| buf_config.attributes = GSL_DATA_MODE_BLOCKING; |
| else if (mode == AGM_DATA_EXTERN_MEM) |
| buf_config.attributes = GSL_DATA_MODE_EXTERN_MEM; |
| else if (mode == AGM_DATA_NON_BLOCKING) |
| buf_config.attributes = GSL_DATA_MODE_NON_BLOCKING; |
| else { |
| AGM_LOGE("Unsupported buffer mode : %d, Default to Blocking\n", mode); |
| buf_config.attributes = GSL_DATA_MODE_BLOCKING; |
| } |
| buf_config.shmem_ep_tag = RD_SHMEM_ENDPOINT; |
| |
| size = sizeof(struct gsl_cmd_configure_read_write_params); |
| |
| cmd_id = GSL_CMD_CONFIGURE_READ_PARAMS; |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, cmd_id, &buf_config, size); |
| if (ret != 0) |
| goto done; |
| |
| /*configure write params, note that only few parameters change for read and write params |
| * e.g, attributes, start_threshold, stop_threshold are same for both. |
| */ |
| AGM_LOGD("write params: mode %d sess buf_sz %zu num_bufs %d metadata %d \n", |
| mode, sess_obj->out_buffer_config.size, |
| sess_obj->out_buffer_config.count, |
| sess_obj->out_buffer_config.max_metadata_size); |
| |
| buf_config.buff_size = (uint32_t)sess_obj->out_buffer_config.size; |
| buf_config.num_buffs = sess_obj->out_buffer_config.count; |
| buf_config.max_metadata_size = sess_obj->out_buffer_config.max_metadata_size; |
| buf_config.shmem_ep_tag = WR_SHMEM_ENDPOINT; |
| cmd_id = GSL_CMD_CONFIGURE_WRITE_PARAMS; |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, cmd_id, &buf_config, size); |
| |
| } else { |
| if (sess_obj->stream_config.dir == TX) |
| buffer_config = sess_obj->in_buffer_config; |
| else |
| buffer_config = sess_obj->out_buffer_config; |
| |
| AGM_LOGD("%s sess buf_sz %zu num_bufs %d\n", sess_obj->stream_config.dir == RX? |
| "Playback":"Capture", buffer_config.size, |
| buffer_config.count); |
| |
| if (mode == AGM_DATA_PUSH_PULL) { |
| buf_config.buff_size = buffer_config.count * |
| buffer_config.size; |
| buf_config.num_buffs = 1; |
| } else { |
| buf_config.buff_size = (uint32_t)buffer_config.size; |
| buf_config.num_buffs = buffer_config.count; |
| } |
| buf_config.start_threshold = sess_obj->stream_config.start_threshold; |
| buf_config.stop_threshold = sess_obj->stream_config.stop_threshold; |
| |
| if (mode == AGM_DATA_PUSH_PULL) |
| buf_config.shmem_ep_tag = PULL_PUSH_SHMEM_ENDPOINT; |
| else |
| buf_config.shmem_ep_tag = SHMEM_ENDPOINT; |
| /** |
| *TODO:expose a flag to chose between different data passing modes |
| *BLOCKING/NON-BLOCKING/SHARED_MEM. |
| */ |
| if (mode == AGM_DATA_BLOCKING) |
| buf_config.attributes = GSL_DATA_MODE_BLOCKING; |
| else if (mode == AGM_DATA_EXTERN_MEM) |
| buf_config.attributes = GSL_DATA_MODE_EXTERN_MEM; |
| else if (mode == AGM_DATA_NON_BLOCKING) |
| buf_config.attributes = GSL_DATA_MODE_NON_BLOCKING; |
| else if (mode == AGM_DATA_PUSH_PULL) |
| buf_config.attributes = GSL_DATA_MODE_PUSH_PULL; |
| else { |
| AGM_LOGE("Unsupported buffer mode : %d, Default to Blocking\n", mode); |
| buf_config.attributes = GSL_DATA_MODE_BLOCKING; |
| } |
| |
| size = sizeof(struct gsl_cmd_configure_read_write_params); |
| |
| if (sess_obj->stream_config.dir == RX) |
| cmd_id = GSL_CMD_CONFIGURE_WRITE_PARAMS; |
| else |
| cmd_id = GSL_CMD_CONFIGURE_READ_PARAMS; |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, cmd_id, &buf_config, size); |
| } |
| done: |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("Buffer configuration failed error %d\n", ret); |
| } else |
| gph_obj->is_config_buf_params_done = true; |
| |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_init() |
| { |
| uint32_t ret = 0; |
| struct gsl_acdb_data_files acdb_files; |
| struct gsl_acdb_file delta_file; |
| struct gsl_init_data init_data; |
| const char *delta_file_path; |
| char file_path_extn[FILE_PATH_EXTN_MAX_SIZE] = {0}; |
| bool snd_card_found = false; |
| |
| #ifndef ACDB_PATH |
| # error "Define -DACDB_PATH="PATH" in the makefile to compile" |
| #endif |
| /*Populate acdbfiles from the shared file path*/ |
| acdb_files.num_files = 0; |
| |
| snd_card_found = get_file_path_extn(file_path_extn); |
| if (snd_card_found) { |
| snprintf(acdb_path, ACDB_PATH_MAX_LENGTH, "%s%s", ACDB_PATH, file_path_extn); |
| } else { |
| ret = -ENOENT; |
| goto err; |
| } |
| AGM_LOGI("acdb file path: %s\n", acdb_path); |
| |
| ret = get_acdb_files_from_directory(acdb_path, &acdb_files); |
| if (ret) |
| goto err; |
| |
| #ifdef ACDB_DELTA_FILE_PATH |
| delta_file_path = CONV_TO_STRING(ACDB_DELTA_FILE_PATH); |
| if ((strlen(delta_file_path) + 1) > sizeof(delta_file.fileName)) { |
| AGM_LOGE("path is big than what gsl handles"); |
| ret = -EINVAL; |
| goto err; |
| } |
| delta_file.fileNameLen = strlen(delta_file_path) + 1; |
| ret = strlcpy(delta_file.fileName, delta_file_path, delta_file.fileNameLen); |
| #else |
| # error "Define -DACDB_DELTA_FILE_PATH="PATH" in the makefile to compile" |
| #endif |
| |
| init_data.acdb_files = &acdb_files; |
| init_data.acdb_delta_file = &delta_file; |
| init_data.acdb_addr = 0x0; |
| init_data.max_num_ready_checks = 1; |
| init_data.ready_check_interval_ms = 100; |
| ret = gsl_init(&init_data); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("gsl_init failed error %d \n", ret); |
| } |
| |
| err: |
| return ret; |
| } |
| |
| int graph_deinit() |
| { |
| |
| gsl_deinit(); |
| return 0; |
| } |
| |
| void gsl_callback_func(struct gsl_event_cb_params *event_params, |
| void *client_data) |
| { |
| struct graph_obj *graph_obj = (struct graph_obj *) client_data; |
| struct agm_event_cb_params *ev; |
| struct gsl_event_read_write_done_payload *rw_done_payload; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("Invalid graph object"); |
| goto done; |
| } |
| if (event_params == NULL) { |
| AGM_LOGE("event params NULL"); |
| goto done; |
| } |
| |
| ev = calloc(1, sizeof(struct agm_event_cb_params) + event_params->event_payload_size); |
| if (!ev) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| goto done; |
| } |
| |
| ev->source_module_id = event_params->source_module_id; |
| ev->event_id = event_params->event_id; |
| ev->event_payload_size = event_params->event_payload_size; |
| memcpy(ev->event_payload, event_params->event_payload, event_params->event_payload_size); |
| |
| if (graph_obj->sess_obj && |
| graph_obj->sess_obj->stream_config.data_mode == AGM_DATA_EXTERN_MEM) { |
| if ((ev->event_payload_size > 0) && ((ev->event_id == AGM_EVENT_READ_DONE) || |
| (ev->event_id == AGM_EVENT_WRITE_DONE))) { |
| rw_done_payload = (struct gsl_event_read_write_done_payload *)ev->event_payload; |
| rw_done_payload->md_status = ar_err_get_lnx_err_code(rw_done_payload->md_status); |
| rw_done_payload->status = ar_err_get_lnx_err_code(rw_done_payload->status); |
| } |
| } |
| |
| if (graph_obj->cb) |
| graph_obj->cb(ev, |
| graph_obj->client_data); |
| free(ev); |
| done: |
| return; |
| } |
| |
| int graph_get_tags_with_module_info(struct agm_key_vector_gsl *gkv, |
| void *payload, size_t *size) |
| { |
| int ret; |
| ret = gsl_get_tags_with_module_info((struct gsl_key_vector *) gkv, |
| payload, size); |
| return ar_err_get_lnx_err_code(ret); |
| } |
| |
| static int get_tags_with_module_info(struct agm_key_vector_gsl *gkv, |
| void **payload, size_t *size) |
| { |
| int ret = 0; |
| void *new_payload = NULL; |
| |
| // start with TAGGED_MOD_SIZE_BYTES |
| *size = TAGGED_MOD_SIZE_BYTES; |
| *payload = calloc(1, *size); |
| if (NULL == *payload) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| ret = gsl_get_tags_with_module_info((struct gsl_key_vector *)gkv, *payload, |
| size); |
| ret = ar_err_get_lnx_err_code(ret); |
| if (ret != 0) { |
| if (ret == -ENODATA) { |
| // default TAGGED_MOD_SIZE_BYTES was not sufficient, alloc new size |
| new_payload = realloc(*payload, *size); |
| if (!new_payload) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| ret = -ENOMEM; |
| free(*payload); |
| goto error; |
| } |
| |
| *payload = new_payload; |
| ret = gsl_get_tags_with_module_info((struct gsl_key_vector *)gkv, |
| *payload, size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("Failed to get tags info with error no %d\n",ret); |
| free(*payload); |
| goto error; |
| } |
| goto done; |
| } else { |
| AGM_LOGE("Failed to get tags info with error no %d\n",ret); |
| free(*payload); |
| goto error; |
| } |
| } |
| |
| goto done; |
| |
| error: |
| *payload = NULL; |
| *size = 0; |
| |
| done: |
| return ret; |
| } |
| |
| static int add_to_list(uint32_t module_list_count, module_info_t *info, struct listnode *node) |
| { |
| uint32_t count = 0; |
| int ret = 0; |
| module_info_link_list_t *mod_list = NULL; |
| |
| for (count = 0; count < module_list_count; count++) { |
| mod_list = calloc(1, sizeof(module_info_link_list_t)); |
| if (!mod_list) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| mod_list->data = info + count; |
| list_add_tail(node, &mod_list->tagged_list); |
| } |
| done: |
| return ret; |
| } |
| |
| int graph_open(struct agm_meta_data_gsl *meta_data_kv, |
| struct session_obj *sess_obj, struct device_obj *dev_obj, |
| struct graph_obj **gph_obj) |
| { |
| struct graph_obj *graph_obj = NULL; |
| int ret = 0; |
| struct listnode *temp_node, *node = NULL, *node_list = NULL; |
| |
| struct gsl_tag_module_info *tag_module_info = NULL; |
| size_t tag_module_info_size; |
| struct gsl_tag_module_info_entry *gsl_tag_entry = NULL; |
| struct agm_key_vector_gsl *gkv; |
| int i = 0; |
| size_t module_list_count = 0; |
| module_info_t *mod, *temp_mod = NULL; |
| module_info_link_list_t *mod_list = NULL; |
| size_t arraysize = 0; |
| module_info_t *stream_module_list = NULL; |
| module_info_t *hw_ep_module = NULL; |
| |
| list_declare(node_sess); |
| list_init(&node_sess); |
| list_declare(node_hw); |
| list_init(&node_hw); |
| |
| |
| AGM_LOGD("entry"); |
| if (meta_data_kv == NULL || gph_obj == NULL) { |
| AGM_LOGE("Invalid input\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| graph_obj = calloc (1, sizeof(struct graph_obj)); |
| if (graph_obj == NULL) { |
| AGM_LOGE("failed to allocate graph object\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| metadata_print(meta_data_kv); |
| |
| list_init(&graph_obj->tagged_mod_list); |
| pthread_mutex_init(&graph_obj->lock, (const pthread_mutexattr_t *)NULL); |
| if (sess_obj->stream_config.sess_mode == AGM_SESSION_NO_CONFIG) |
| goto no_config; |
| |
| /** |
| *TODO:In the current config parameters we dont have a |
| *way to know if a hostless session (loopback) |
| *is session loopback or device loopback |
| *We assume now that if it is a hostless |
| *session then it is device loopback always. |
| *And hence we configure pcm decoder/encoder/convertor |
| *only in case of a no hostless session. |
| */ |
| |
| /*Get all the tags info of the graph and store it tag_module_info structure*/ |
| ret = get_tags_with_module_info(&meta_data_kv->gkv, |
| (void**) &tag_module_info, &tag_module_info_size); |
| if (ret != 0 || !tag_module_info) |
| goto free_graph_obj; |
| |
| gsl_tag_entry = (struct gsl_tag_module_info_entry *)(tag_module_info->tag_module_entry); |
| |
| /* Add all default stream_module to node_sess list */ |
| get_stream_module_list_array(&stream_module_list, &arraysize); |
| module_list_count = arraysize /sizeof(struct module_info); |
| ret = add_to_list(module_list_count, stream_module_list, &node_sess); |
| if (ret != 0) |
| goto free_graph_obj; |
| |
| /* Add all default hw_ep_module to node_hw list */ |
| get_hw_ep_module_list_array(&hw_ep_module, &arraysize); |
| module_list_count = arraysize /sizeof(struct module_info); |
| ret = add_to_list(module_list_count, hw_ep_module, &node_hw); |
| if (ret != 0) |
| goto free_graph_obj; |
| |
| for (i = 0; i < tag_module_info->num_tags; i++) { |
| if (sess_obj != NULL) { |
| /** |
| * Compare each stream_module present in node_sess list with |
| * gsl_tag_entry and if match found we are adding it to the graph |
| * module_list using ADD_MODULE . And remove this module from |
| * node_sess list . So that in next iterationit will not compare the |
| * same module with gsl_tag_entry again. |
| */ |
| list_for_each(node_list, &node_sess) { |
| mod_list = node_to_item(node_list, module_info_link_list_t, tagged_list); |
| if (gsl_tag_entry->tag_id == mod_list->data->tag) { |
| if (gsl_tag_entry->num_modules > 1) { |
| AGM_LOGE("modules num is invalid"); |
| goto free_graph_obj; |
| } |
| mod = mod_list->data; |
| mod->miid = gsl_tag_entry->module_entry[0].module_iid; |
| mod->mid = gsl_tag_entry->module_entry[0].module_id; |
| AGM_LOGD("miid %x mid %x tag %x", mod->miid, mod->mid, mod->tag); |
| ADD_MODULE(*mod, NULL); |
| /*Remove the module from the node_sess list*/ |
| list_remove(node_list); |
| goto tag_list; |
| } |
| } |
| } |
| |
| if (dev_obj != NULL) { |
| /** |
| * Compare each hw_ep_module present in node_hw list with |
| * gsl_tag_entry and if match found we are adding it to the graph |
| * module_list using ADD_MODULE . And remove this module from |
| * node_hw list.So that in next iteration it will not compare the |
| * same module with gsl_tag_entry again. |
| */ |
| list_for_each(node_list, &node_hw) { |
| mod_list = node_to_item(node_list, module_info_link_list_t, tagged_list); |
| if (gsl_tag_entry->tag_id == mod_list->data->tag) { |
| if (gsl_tag_entry->num_modules > 1) { |
| AGM_LOGE("modules num is invalid"); |
| goto free_graph_obj; |
| } |
| mod = mod_list->data; |
| mod->miid = gsl_tag_entry->module_entry[0].module_iid; |
| mod->mid = gsl_tag_entry->module_entry[0].module_id; |
| /*store GKV which describes/contains this module*/ |
| gkv = calloc(1, sizeof(struct agm_key_vector_gsl)); |
| if (!gkv) { |
| AGM_LOGE("No memory to create merged metadata\n"); |
| ret = -ENOMEM; |
| goto free_graph_obj; |
| } |
| gkv->num_kvs = meta_data_kv->gkv.num_kvs; |
| gkv->kv = calloc(gkv->num_kvs, sizeof(struct agm_key_value)); |
| if (!gkv->kv) { |
| AGM_LOGE("No memory to create merged metadata gkv\n"); |
| free(gkv); |
| ret = -ENOMEM; |
| goto free_graph_obj; |
| } |
| memcpy(gkv->kv, meta_data_kv->gkv.kv, |
| gkv->num_kvs * sizeof(struct agm_key_value)); |
| mod->gkv = gkv; |
| AGM_LOGD("miid %x mid %x tag %x", mod->miid, mod->mid, mod->tag); |
| ADD_MODULE(*mod, dev_obj); |
| /*Remove the module from node_hw list*/ |
| list_remove(node_list); |
| goto tag_list; |
| } |
| } |
| } |
| tag_list: |
| gsl_tag_entry = (struct gsl_tag_module_info_entry *) ((char *)gsl_tag_entry + sizeof(struct gsl_tag_module_info_entry) + |
| (sizeof(struct gsl_module_id_info_entry) * |
| gsl_tag_entry->num_modules)); |
| } |
| no_config: |
| graph_obj->sess_obj = sess_obj; |
| |
| ret = gsl_open((struct gsl_key_vector *)&meta_data_kv->gkv, |
| (struct gsl_key_vector *)&meta_data_kv->ckv, |
| &graph_obj->graph_handle); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("Failed to open the graph with error %d\n", ret); |
| goto free_graph_obj; |
| } |
| |
| ret = gsl_register_event_cb(graph_obj->graph_handle, |
| gsl_callback_func, graph_obj); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("failed to register callback\n"); |
| goto close_graph; |
| } |
| graph_obj->state = OPENED; |
| *gph_obj = graph_obj; |
| AGM_LOGD("graph_handle %p\n", graph_obj->graph_handle); |
| |
| goto done; |
| |
| close_graph: |
| gsl_close(graph_obj->graph_handle); |
| free_graph_obj: |
| /*free the list of modules associated with this graph_object*/ |
| list_for_each_safe(node, temp_node, &graph_obj->tagged_mod_list) { |
| list_remove(node); |
| temp_mod = node_to_item(node, module_info_t, list); |
| if (temp_mod->gkv) { |
| free(temp_mod->gkv->kv); |
| free(temp_mod->gkv); |
| } |
| free(temp_mod); |
| } |
| pthread_mutex_destroy(&graph_obj->lock); |
| free(graph_obj); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| if (tag_module_info) |
| free(tag_module_info); |
| return ret; |
| } |
| |
| int graph_close(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct listnode *temp_node,*node = NULL; |
| module_info_t *temp_mod = NULL; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry handle %p", graph_obj->graph_handle); |
| |
| ret = gsl_close(graph_obj->graph_handle); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("gsl close failed error %d\n", ret); |
| } |
| /*free the list of modules associated with this graph_object*/ |
| list_for_each_safe(node, temp_node, &graph_obj->tagged_mod_list) { |
| list_remove(node); |
| temp_mod = node_to_item(node, module_info_t, list); |
| if (temp_mod->gkv) { |
| free(temp_mod->gkv->kv); |
| free(temp_mod->gkv); |
| } |
| free(temp_mod); |
| } |
| pthread_mutex_unlock(&graph_obj->lock); |
| pthread_mutex_destroy(&graph_obj->lock); |
| free(graph_obj); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_prepare(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct listnode *node = NULL; |
| module_info_t *mod = NULL; |
| struct session_obj *sess_obj = NULL; |
| struct agm_session_config stream_config; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| sess_obj = graph_obj->sess_obj; |
| |
| if (sess_obj == NULL) { |
| AGM_LOGE("invalid sess object\n"); |
| return -EINVAL; |
| } |
| stream_config = sess_obj->stream_config; |
| |
| AGM_LOGD("entry graph_handle %p", graph_obj->graph_handle); |
| pthread_mutex_lock(&graph_obj->lock); |
| if (graph_obj->state == PREPARED) { |
| AGM_LOGD("Graph already prepared"); |
| goto done; |
| } |
| /** |
| *Iterate over mod list to configure each module |
| *present in the graph. Also validate if the module list |
| *matches the configuration passed by the client. |
| */ |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| if (mod->is_configured) { |
| if ((mod->tag == DEVICE_HW_ENDPOINT_RX) || (mod->tag == DEVICE_HW_ENDPOINT_TX)) |
| goto force_configure; |
| else |
| continue; |
| } |
| if ((mod->tag == STREAM_INPUT_MEDIA_FORMAT) && |
| (stream_config.sess_mode == AGM_SESSION_NO_HOST)) { |
| AGM_LOGE("Shared mem mod present for a hostless session error out\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (((mod->tag == STREAM_PCM_DECODER) && |
| (stream_config.dir == TX)) || |
| ((mod->tag == STREAM_PCM_ENCODER) && |
| (stream_config.dir == RX))) { |
| AGM_LOGE("Session cfg (dir = %d) does not match session module %x\n", |
| stream_config.dir, mod->module); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| force_configure: |
| if (mod->configure) { |
| if ((mod->dev_obj != NULL) && |
| ((mod->tag == DEVICE_HW_ENDPOINT_RX)|| (mod->tag == DEVICE_HW_ENDPOINT_TX)) && |
| (device_get_start_refcnt(mod->dev_obj) > 0)) { |
| AGM_LOGE("device obj:%s in started state, start ref_cnt:%d miid %x mid %x tag %x\n", |
| mod->dev_obj->name, device_get_start_refcnt(mod->dev_obj), mod->miid, mod->mid, mod->tag); |
| mod->is_configured = true; |
| continue; |
| } else { |
| ret = mod->configure(mod, graph_obj); |
| if (ret != 0) { |
| AGM_LOGE("Module configuration for miid %x, mid %x, tag %x, failed:%d\n", |
| mod->miid, mod->mid, mod->tag, ret); |
| goto done; |
| } |
| mod->is_configured = true; |
| } |
| |
| } |
| } |
| |
| /*Configure buffers only if it is not a hostless session*/ |
| if ((sess_obj != NULL) && |
| (stream_config.sess_mode != AGM_SESSION_NO_HOST) && |
| sess_obj->stream_config.sess_mode != AGM_SESSION_NO_CONFIG) { |
| ret = configure_buffer_params(graph_obj, sess_obj); |
| if (ret != 0) { |
| AGM_LOGE("buffer configuration failed \n"); |
| goto done; |
| } |
| } |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_PREPARE, NULL, 0); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_prepare failed %d\n", ret); |
| goto done; |
| } |
| graph_obj->state = PREPARED; |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_start(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p", graph_obj->graph_handle); |
| |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_START, NULL, 0); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_start failed %d\n", ret); |
| goto done; |
| } |
| graph_obj->state = STARTED; |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_stop(struct graph_obj *graph_obj, |
| struct agm_meta_data_gsl *meta_data) |
| { |
| int ret = 0; |
| struct gsl_cmd_properties gsl_cmd_prop = {0}; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p\n", graph_obj->graph_handle); |
| if (graph_obj->state & (STOPPED)) { |
| AGM_LOGE("graph object is already in STOP state\n"); |
| goto done; |
| } |
| if (!(graph_obj->state & (STARTED))) { |
| AGM_LOGE("graph object is not in correct state, current state %d\n", |
| graph_obj->state); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (meta_data) { |
| memcpy (&(gsl_cmd_prop.gkv), &(meta_data->gkv), |
| sizeof(struct gsl_key_vector)); |
| gsl_cmd_prop.property_id = meta_data->sg_props.prop_id; |
| gsl_cmd_prop.num_property_values = meta_data->sg_props.num_values; |
| gsl_cmd_prop.property_values = meta_data->sg_props.values; |
| |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_STOP, |
| &gsl_cmd_prop, sizeof(struct gsl_cmd_properties)); |
| /* Continue to close graph even stop fails */ |
| if (ret !=0) |
| AGM_LOGE("graph stop with prop failed %d\n", ret); |
| |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_CLOSE_WITH_PROPS, |
| &gsl_cmd_prop, sizeof(struct gsl_cmd_properties)); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph close with prop failed %d\n", ret); |
| } |
| } else { |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_STOP, NULL, 0); |
| graph_obj->state = STOPPED; |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph stop failed %d\n", ret); |
| } |
| } |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_pause_resume(struct graph_obj *graph_obj, bool pause) |
| { |
| int ret = 0; |
| struct listnode *node = NULL; |
| module_info_t *mod; |
| struct apm_module_param_data_t *header; |
| size_t payload_size = 0; |
| uint8_t *payload = NULL; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| /* Pause module info is retrived and added to list in graph_open */ |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| if (mod->tag == TAG_PAUSE) { |
| AGM_LOGD("Soft Pause module IID 0x%x, Pause: %d\n", mod->miid, pause); |
| |
| payload_size = sizeof(struct apm_module_param_data_t); |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("No memory to allocate for payload\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| header->module_instance_id = mod->miid; |
| if (pause) |
| header->param_id = PARAM_ID_SOFT_PAUSE_START; |
| else |
| header->param_id = PARAM_ID_SOFT_PAUSE_RESUME; |
| |
| header->error_code = 0x0; |
| header->param_size = 0x0; |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| ret = gsl_set_custom_config(graph_obj->graph_handle, |
| payload, payload_size); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_set_custom_config failed %d\n", ret); |
| } |
| pthread_mutex_unlock(&graph_obj->lock); |
| free(payload); |
| break; |
| } |
| } |
| |
| done: |
| return ret; |
| } |
| |
| |
| int graph_pause(struct graph_obj *graph_obj) |
| { |
| return graph_pause_resume(graph_obj, true); |
| } |
| |
| int graph_flush(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p\n", graph_obj->graph_handle); |
| |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_FLUSH, NULL, 0); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_flush failed %d\n", ret); |
| goto done; |
| } |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| |
| int graph_resume(struct graph_obj *graph_obj) |
| { |
| return graph_pause_resume(graph_obj, false); |
| } |
| |
| int graph_suspend(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| |
| AGM_LOGD("Enter"); |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p\n", graph_obj->graph_handle); |
| |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_SUSPEND, NULL, 0); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_suspend failed %d\n", ret); |
| goto done; |
| } |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit ret: %d", ret); |
| return ret; |
| } |
| |
| int graph_set_config(struct graph_obj *graph_obj, void *payload, |
| size_t payload_size) |
| { |
| int ret = 0; |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p", graph_obj->graph_handle); |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_set_config failed %d\n", ret); |
| } |
| |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, graph handle %p, ret %d", graph_obj->graph_handle, ret); |
| return ret; |
| } |
| |
| int graph_get_config(struct graph_obj *graph_obj, void *payload, |
| size_t payload_size) |
| { |
| int ret = 0; |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGV("entry graph_handle %p", graph_obj->graph_handle); |
| ret = gsl_get_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_get_config failed %d", ret); |
| } |
| pthread_mutex_unlock(&graph_obj->lock); |
| |
| return ret; |
| } |
| |
| int graph_set_config_with_tag(struct graph_obj *graph_obj, |
| struct agm_key_vector_gsl *gkv, |
| struct agm_tag_config_gsl *tag_config) |
| { |
| int ret = 0; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| ret = gsl_set_config(graph_obj->graph_handle, (struct gsl_key_vector *)gkv, |
| tag_config->tag_id, |
| (struct gsl_key_vector *)&tag_config->tkv); |
| if (ret) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_set_config failed %d\n", ret); |
| } |
| |
| pthread_mutex_unlock(&graph_obj->lock); |
| |
| return ret; |
| } |
| |
| int graph_set_cal(struct graph_obj *graph_obj, |
| struct agm_meta_data_gsl *metadata) |
| { |
| int ret = 0; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| ret = gsl_set_cal(graph_obj->graph_handle, |
| (struct gsl_key_vector *)&metadata->gkv, |
| (struct gsl_key_vector *)&metadata->ckv); |
| if (ret) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_set_cal failed %d\n", ret); |
| } |
| |
| pthread_mutex_unlock(&graph_obj->lock); |
| |
| return ret; |
| } |
| |
| int graph_write(struct graph_obj *graph_obj, struct agm_buff *buffer, size_t *size) |
| { |
| int ret = 0; |
| struct gsl_buff gsl_buff = {0}; |
| uint32_t size_written = 0; |
| uint32_t write_mod_tag = SHMEM_ENDPOINT; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| *In case of non-tunnel mode session we have two shared memory endpoints |
| *One for read from the graph and other for writing into the graph |
| */ |
| if ((graph_obj->sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) && |
| (graph_obj->sess_obj->stream_config.dir == (RX | TX))) |
| write_mod_tag = WR_SHMEM_ENDPOINT; |
| |
| gsl_buff.timestamp = buffer->timestamp; |
| gsl_buff.flags = buffer->flags; |
| gsl_buff.size = buffer->size; |
| gsl_buff.addr = buffer->addr; |
| gsl_buff.metadata_size = buffer->metadata_size; |
| gsl_buff.metadata = buffer->metadata; |
| gsl_buff.alloc_info.alloc_handle = buffer->alloc_info.alloc_handle; |
| gsl_buff.alloc_info.alloc_size = buffer->alloc_info.alloc_size; |
| gsl_buff.alloc_info.offset = buffer->alloc_info.offset; |
| |
| ret = gsl_write(graph_obj->graph_handle, |
| write_mod_tag, &gsl_buff, &size_written); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("gsl_write for size %zu failed with error %d\n", *size, ret); |
| goto done; |
| } |
| *size = (size_t)size_written; |
| done: |
| return ret; |
| } |
| |
| int graph_read(struct graph_obj *graph_obj, struct agm_buff *buffer, size_t *size) |
| { |
| int ret = 0; |
| struct gsl_buff gsl_buff = {0}; |
| int size_read = 0; |
| uint32_t read_mod_tag = SHMEM_ENDPOINT; |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| /* |
| *In case of non-tunnel mode session we have two shared memory endpoints |
| *in a single graph, one to read from the graph and other for writing into |
| *the graph |
| */ |
| if ((graph_obj->sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) && |
| (graph_obj->sess_obj->stream_config.dir == (RX | TX))) |
| read_mod_tag = RD_SHMEM_ENDPOINT; |
| |
| gsl_buff.timestamp = buffer->timestamp; |
| gsl_buff.flags = buffer->flags; |
| gsl_buff.size = buffer->size; |
| gsl_buff.addr = buffer->addr; |
| gsl_buff.metadata_size = buffer->metadata_size; |
| gsl_buff.metadata = buffer->metadata; |
| gsl_buff.alloc_info.alloc_handle = buffer->alloc_info.alloc_handle; |
| gsl_buff.alloc_info.alloc_size = buffer->alloc_info.alloc_size; |
| gsl_buff.alloc_info.offset = buffer->alloc_info.offset; |
| |
| ret = gsl_read(graph_obj->graph_handle, |
| read_mod_tag, &gsl_buff, (uint32_t *)&size_read); |
| if ((ret != 0) || |
| ((size_read == 0) && |
| (graph_obj->sess_obj->stream_config.sess_mode != AGM_SESSION_NON_TUNNEL))) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("size_requested %zu size_read %d error %d\n", |
| *size, size_read, ret); |
| } |
| *size = size_read; |
| graph_obj->buf_info.timestamp = gsl_buff.timestamp; |
| |
| return ret; |
| } |
| |
| int graph_add(struct graph_obj *graph_obj, |
| struct agm_meta_data_gsl *meta_data_kv, |
| struct device_obj *dev_obj) |
| { |
| int ret = 0; |
| |
| struct gsl_cmd_graph_select add_graph; |
| module_info_t *mod = NULL; |
| struct agm_key_vector_gsl *gkv; |
| struct listnode *node = NULL; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p\n", graph_obj->graph_handle); |
| |
| if (graph_obj->state < OPENED) { |
| AGM_LOGE("Cannot add a graph in %d state\n", graph_obj->state); |
| ret = -EINVAL; |
| goto done; |
| } |
| /** |
| *This api is used to add a new device leg ( is device object is |
| *present in the argument or to add an already exisiting graph. |
| *Hence we need not add any new session (stream) related modules |
| */ |
| |
| /*Add the new GKV to the current graph*/ |
| add_graph.graph_key_vector.num_kvps = meta_data_kv->gkv.num_kvs; |
| add_graph.graph_key_vector.kvp = (struct gsl_key_value_pair *) |
| meta_data_kv->gkv.kv; |
| add_graph.cal_key_vect.num_kvps = meta_data_kv->ckv.num_kvs; |
| add_graph.cal_key_vect.kvp = (struct gsl_key_value_pair *) |
| meta_data_kv->ckv.kv; |
| metadata_print(meta_data_kv); |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_ADD_GRAPH, &add_graph, |
| sizeof(struct gsl_cmd_graph_select)); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph add failed with error %d\n", ret); |
| goto done; |
| } |
| if (dev_obj != NULL) { |
| module_info_t *temp_mod = NULL; |
| size_t module_info_size; |
| struct gsl_module_id_info *module_info; |
| bool mod_present = false; |
| size_t arraysize; |
| module_info_t *hw_ep_module = NULL; |
| |
| get_hw_ep_module_list_array(&hw_ep_module, &arraysize); |
| if (dev_obj->hw_ep_info.dir == AUDIO_OUTPUT) |
| mod = &hw_ep_module[0]; |
| else |
| mod = &hw_ep_module[1]; |
| |
| ret = gsl_get_tagged_module_info((struct gsl_key_vector *) |
| &meta_data_kv->gkv, |
| mod->tag, |
| &module_info, (uint32_t*) &module_info_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("cannot get tagged module info for module %x\n", |
| mod->tag); |
| goto done; |
| } |
| mod->miid = module_info->module_entry[0].module_iid; |
| mod->mid = module_info->module_entry[0].module_id; |
| /** |
| *Check if this is the same device object as was passed for graph open |
| *or a new one.We do this by comparing the module_iid of the module |
| *present in the graph object with the one returned from the above api. |
| *if it is a new module we add it to the list and configure it. |
| */ |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| temp_mod = node_to_item(node, module_info_t, list); |
| if (temp_mod->miid == mod->miid) { |
| mod_present = true; |
| /** |
| * Module might have configured previously as we don't reset in |
| * graph_remove() API. Reset is_configured flag here. |
| * Ex: back to back device switch scenario. |
| */ |
| temp_mod->is_configured = false; |
| break; |
| } |
| } |
| if (!mod_present) { |
| /** |
| *This is a new device object, add this module to the list and |
| */ |
| /*Make a local copy of gkv and use when we query gsl |
| for tagged data*/ |
| gkv = calloc(1, sizeof(struct agm_key_vector_gsl)); |
| if (!gkv) { |
| AGM_LOGE("No memory to allocate for gkv\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| gkv->num_kvs = meta_data_kv->gkv.num_kvs; |
| gkv->kv = calloc(gkv->num_kvs, sizeof(struct agm_key_value)); |
| if (!gkv->kv) { |
| AGM_LOGE("No memory to allocate for kv\n"); |
| free(gkv); |
| ret = -ENOMEM; |
| goto done; |
| } |
| memcpy(gkv->kv, meta_data_kv->gkv.kv, |
| gkv->num_kvs * sizeof(struct agm_key_value)); |
| mod->gkv = gkv; |
| gkv = NULL; |
| AGM_LOGD("Adding the new module tag %x mid %x miid %x\n", |
| mod->tag, mod->mid, mod->miid); |
| ADD_MODULE(*mod, dev_obj); |
| } |
| } |
| /* Configure the newly added modules only if graph is in start state, |
| * in all other states, graph_prepare will take care of configuring |
| * modules. |
| */ |
| if (graph_obj->state & (STARTED|PREPARED)) { |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| /* Need to configure SPR module again for the new device */ |
| if (mod->is_configured && !(mod->tag == TAG_STREAM_SPR)) |
| continue; |
| |
| if ((mod->dev_obj != NULL) && |
| ((mod->tag == DEVICE_HW_ENDPOINT_RX) || |
| (mod->tag == DEVICE_HW_ENDPOINT_TX)) && |
| (device_get_start_refcnt(mod->dev_obj) > 0)) { |
| AGM_LOGE("device obj:%s in started state, start ref_cnt:%d\n", |
| mod->dev_obj->name, device_get_start_refcnt(mod->dev_obj)); |
| mod->is_configured = true; |
| continue; |
| } |
| |
| if (mod->configure) { |
| ret = mod->configure(mod, graph_obj); |
| if (ret != 0) |
| goto done; |
| mod->is_configured = true; |
| } |
| } |
| } |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_change(struct graph_obj *graph_obj, |
| struct agm_meta_data_gsl *meta_data_kv, |
| struct device_obj *dev_obj) |
| { |
| int ret = 0; |
| |
| struct gsl_cmd_graph_select change_graph; |
| module_info_t *mod = NULL; |
| struct agm_key_vector_gsl *gkv; |
| struct listnode *node, *temp_node = NULL; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p", graph_obj->graph_handle); |
| |
| if (dev_obj != NULL) { |
| mod = NULL; |
| module_info_t *add_module, *temp_mod = NULL; |
| size_t module_info_size; |
| struct gsl_module_id_info *module_info; |
| bool mod_present = false; |
| size_t arraysize; |
| module_info_t *hw_ep_module = NULL; |
| get_hw_ep_module_list_array(&hw_ep_module, &arraysize); |
| if (dev_obj->hw_ep_info.dir == AUDIO_OUTPUT) |
| mod = &hw_ep_module[0]; |
| else |
| mod = &hw_ep_module[1]; |
| |
| ret = gsl_get_tagged_module_info((struct gsl_key_vector *) |
| &meta_data_kv->gkv, |
| mod->tag, |
| &module_info, (uint32_t*) &module_info_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("cannot get tagged module info for module %x\n", |
| mod->tag); |
| goto done; |
| } |
| /** |
| *Check if this is the same device object as was passed for graph open |
| *or a new one.We do this by comparing the module_iid of the module |
| *present in the graph object with the one returned from the above api. |
| *If this is a new module, we delete the older device tagged module |
| *as it is not part of the graph anymore (would have been removed as a |
| *part of graph_remove). |
| */ |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| temp_mod = node_to_item(node, module_info_t, list); |
| if (temp_mod->miid == module_info->module_entry[0].module_iid) { |
| AGM_LOGV("info for module %x, config flag = %d\n", temp_mod->tag, temp_mod->is_configured); |
| mod_present = true; |
| temp_mod->is_configured = false; |
| break; |
| } |
| } |
| if (!mod_present) { |
| /*This is a new device object, add this module to the list and |
| *delete the current hw_ep(Device module) from the list. |
| */ |
| list_for_each_safe(node, temp_node, &graph_obj->tagged_mod_list) { |
| temp_mod = node_to_item(node, module_info_t, list); |
| if ((temp_mod->tag == DEVICE_HW_ENDPOINT_TX) || |
| (temp_mod->tag == DEVICE_HW_ENDPOINT_RX)) { |
| list_remove(node); |
| if (temp_mod->gkv) { |
| free(temp_mod->gkv->kv); |
| free(temp_mod->gkv); |
| } |
| free(temp_mod); |
| temp_mod = NULL; |
| } |
| } |
| add_module = ADD_MODULE(*mod, dev_obj); |
| if (!add_module) { |
| AGM_LOGE("No memory to allocate for add_module\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| add_module->miid = module_info->module_entry[0].module_iid; |
| add_module->mid = module_info->module_entry[0].module_id; |
| /*Make a local copy of gkv and use when we query gsl |
| for tagged data*/ |
| gkv = calloc(1, sizeof(struct agm_key_vector_gsl)); |
| if (!gkv) { |
| AGM_LOGE("No memory to allocate for gkv\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| gkv->num_kvs = meta_data_kv->gkv.num_kvs; |
| gkv->kv = calloc(gkv->num_kvs, sizeof(struct agm_key_value)); |
| if (!gkv->kv) { |
| AGM_LOGE("No memory to allocate for kv\n"); |
| free(gkv); |
| ret = -ENOMEM; |
| goto done; |
| } |
| memcpy(gkv->kv, meta_data_kv->gkv.kv, |
| gkv->num_kvs * sizeof(struct agm_key_value)); |
| add_module->gkv = gkv; |
| gkv = NULL; |
| } |
| } |
| /*Send the new GKV for CHANGE_GRAPH*/ |
| change_graph.graph_key_vector.num_kvps = meta_data_kv->gkv.num_kvs; |
| change_graph.graph_key_vector.kvp = (struct gsl_key_value_pair *) |
| meta_data_kv->gkv.kv; |
| change_graph.cal_key_vect.num_kvps = meta_data_kv->ckv.num_kvs; |
| change_graph.cal_key_vect.kvp = (struct gsl_key_value_pair *) |
| meta_data_kv->ckv.kv; |
| metadata_print(meta_data_kv); |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_CHANGE_GRAPH, &change_graph, |
| sizeof(struct gsl_cmd_graph_select)); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph add failed with error %d\n", ret); |
| goto done; |
| } |
| /*configure modules again*/ |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| if (mod->configure && !mod->is_configured && |
| (mod->dev_obj != NULL && device_get_start_refcnt(mod->dev_obj) == 0)) { |
| ret = mod->configure(mod, graph_obj); |
| if (ret != 0) |
| goto done; |
| mod->is_configured = true; |
| } |
| } |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_remove(struct graph_obj *graph_obj, |
| struct agm_meta_data_gsl *meta_data_kv) |
| { |
| int ret = 0; |
| struct gsl_cmd_remove_graph rm_graph; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| pthread_mutex_lock(&graph_obj->lock); |
| AGM_LOGD("entry graph_handle %p\n", graph_obj->graph_handle); |
| |
| /** |
| *graph_remove would only pass the graph which needs to be removed. |
| *to GSL. Once graph remove is done, sesison obj will have to issue |
| *graph_change/graph_add if reconfiguration of modules is needed, otherwise |
| *graph_start will suffice.graph remove wont reconfigure the modules. |
| */ |
| rm_graph.graph_key_vector.num_kvps = meta_data_kv->gkv.num_kvs; |
| rm_graph.graph_key_vector.kvp = (struct gsl_key_value_pair *) |
| meta_data_kv->gkv.kv; |
| metadata_print(meta_data_kv); |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_REMOVE_GRAPH, &rm_graph, |
| sizeof(struct gsl_cmd_remove_graph)); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph add failed with error %d\n", ret); |
| } |
| |
| pthread_mutex_unlock(&graph_obj->lock); |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int graph_register_cb(struct graph_obj *gph_obj, event_cb cb, |
| void *client_data) |
| { |
| |
| if (gph_obj == NULL){ |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| |
| if (cb == NULL) { |
| AGM_LOGE("No callback to register\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&gph_obj->lock); |
| gph_obj->cb = cb; |
| gph_obj->client_data = client_data; |
| pthread_mutex_unlock(&gph_obj->lock); |
| |
| return 0; |
| } |
| |
| int graph_register_for_events(struct graph_obj *gph_obj, |
| struct agm_event_reg_cfg *evt_reg_cfg) |
| { |
| int ret = 0; |
| struct gsl_cmd_register_custom_event *reg_ev_payload = NULL; |
| size_t payload_size = 0; |
| |
| if (gph_obj == NULL){ |
| AGM_LOGE("invalid graph object\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (evt_reg_cfg == NULL) { |
| AGM_LOGE("No event register payload passed\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| pthread_mutex_lock(&gph_obj->lock); |
| |
| if (gph_obj->graph_handle == NULL) { |
| pthread_mutex_unlock(&gph_obj->lock); |
| AGM_LOGE("invalid graph handle\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| payload_size = sizeof(struct gsl_cmd_register_custom_event) + |
| evt_reg_cfg->event_config_payload_size; |
| |
| reg_ev_payload = calloc(1, payload_size); |
| if (reg_ev_payload == NULL) { |
| pthread_mutex_unlock(&gph_obj->lock); |
| AGM_LOGE("calloc failed for reg_ev_payload\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| reg_ev_payload->event_id = evt_reg_cfg->event_id; |
| reg_ev_payload->module_instance_id = evt_reg_cfg->module_instance_id; |
| reg_ev_payload->event_config_payload_size = |
| evt_reg_cfg->event_config_payload_size; |
| reg_ev_payload->is_register = evt_reg_cfg->is_register; |
| |
| memcpy((uint8_t *)reg_ev_payload + sizeof(struct gsl_cmd_register_custom_event), |
| evt_reg_cfg->event_config_payload, |
| evt_reg_cfg->event_config_payload_size); |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, GSL_CMD_REGISTER_CUSTOM_EVENT, |
| reg_ev_payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("event registration failed with error %d\n", ret); |
| } |
| pthread_mutex_unlock(&gph_obj->lock); |
| |
| gph_obj->buf_info.timestamp = 0; |
| done: |
| return ret; |
| } |
| |
| size_t graph_get_hw_processed_buff_cnt(struct graph_obj *graph_obj, |
| enum direction dir __unused) |
| { |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object or null callback\n"); |
| return 0; |
| } |
| /*TODO: Uncomment that call once platform moves to latest GSL release*/ |
| return 2 /*gsl_get_processed_buff_cnt(graph_obj->graph_handle, dir)*/; |
| |
| } |
| |
| int graph_eos(struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| AGM_LOGE("enter"); |
| ret = gsl_ioctl(graph_obj->graph_handle, GSL_CMD_EOS, NULL, 0); |
| AGM_LOGE("exit, ret %d", ret); |
| return ar_err_get_lnx_err_code(ret); |
| } |
| |
| int graph_get_session_time(struct graph_obj *graph_obj, uint64_t *tstamp) |
| { |
| int ret = 0; |
| uint8_t *payload = NULL; |
| struct apm_module_param_data_t *header; |
| struct param_id_spr_session_time_t *sess_time; |
| size_t payload_size = 0; |
| uint64_t timestamp; |
| |
| if (graph_obj == NULL || tstamp == NULL) { |
| AGM_LOGE("Invalid Input Params\n"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| if (!(graph_obj->state & (STARTED))) { |
| AGM_LOGV("graph object is not in correct state, current state %d\n", |
| graph_obj->state); |
| ret = 0; |
| goto done; |
| } |
| if (graph_obj->spr_miid == 0) { |
| AGM_LOGE("Invalid SPR module IID to query timestamp\n"); |
| goto done; |
| } |
| AGM_LOGV("SPR module IID: %x\n", graph_obj->spr_miid); |
| |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_spr_session_time_t); |
| /*ensure that the payloadsize is byte multiple */ |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) |
| goto done; |
| |
| header = (struct apm_module_param_data_t*)payload; |
| sess_time = (struct param_id_spr_session_time_t *) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| header->module_instance_id = graph_obj->spr_miid; |
| header->param_id = PARAM_ID_SPR_SESSION_TIME; |
| header->error_code = 0x0; |
| header->param_size = (uint32_t)sizeof(struct param_id_spr_session_time_t); |
| |
| ret = gsl_get_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("gsl_get_custom_config command failed with error %d\n", ret); |
| goto get_fail; |
| } |
| AGM_LOGV("session_time: msw[%u], lsw[%u], at: msw[%u], \ |
| lsw[%u] ts: msw[%u], lsw[%u]\n", |
| sess_time->session_time.value_msw, |
| sess_time->session_time.value_lsw, |
| sess_time->absolute_time.value_msw, |
| sess_time->absolute_time.value_lsw, |
| sess_time->timestamp.value_msw, |
| sess_time->timestamp.value_lsw); |
| |
| timestamp = (uint64_t)sess_time->session_time.value_msw; |
| timestamp = timestamp << 32 | sess_time->session_time.value_lsw; |
| *tstamp = timestamp; |
| |
| get_fail: |
| free(payload); |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| return ret; |
| } |
| |
| int graph_get_buffer_timestamp(struct graph_obj *graph_obj, uint64_t *tstamp) |
| { |
| int ret = 0; |
| |
| if (graph_obj == NULL || tstamp == NULL) { |
| AGM_LOGE("Invalid Input Params"); |
| return -EINVAL; |
| } |
| |
| pthread_mutex_lock(&graph_obj->lock); |
| if (!(graph_obj->state & (STARTED))) { |
| AGM_LOGE("graph object is not in correct state, current state %d", |
| graph_obj->state); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| *tstamp = graph_obj->buf_info.timestamp; |
| |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| return ret; |
| } |
| |
| /* TODO expose this header file from osal */ |
| struct ar_shmem_handle { |
| /*ion fd created on ion memory allocation*/ |
| int32_t ion_mem_fd; |
| }; |
| |
| static int graph_fill_buf_info(struct graph_obj *gph_obj, |
| struct agm_buf_info *buf_info, enum gsl_cmd_id cmd_id, enum buf_flag flag) |
| { |
| struct gsl_cmd_get_shmem_buf_info *shmem_buf_info = NULL; |
| struct ar_shmem_handle *shmem_handle; |
| int ret = -1; |
| |
| if (gph_obj == NULL){ |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| shmem_buf_info = calloc(1, sizeof(struct gsl_cmd_get_shmem_buf_info)); |
| if (!shmem_buf_info) { |
| AGM_LOGE("shmem_buf_info allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| shmem_buf_info->num_buffs = 1; |
| shmem_buf_info->buffs = calloc(shmem_buf_info->num_buffs, sizeof(struct gsl_shmem_buf)); |
| if (!shmem_buf_info->buffs) { |
| AGM_LOGE("buf allocation failed\n"); |
| ret = -ENOMEM; |
| goto free_shbuf_info; |
| } |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, cmd_id, shmem_buf_info, |
| sizeof(struct gsl_cmd_get_shmem_buf_info) + sizeof(struct gsl_shmem_buf)); |
| if (ret != 0) { |
| AGM_LOGE("Buffer info get failed error %d", ret); |
| goto free_buffs; |
| } |
| |
| AGM_LOGD("metadata %llx\n", (unsigned long long) shmem_buf_info->buffs[0].metadata); |
| AGM_LOGD("shmem_buf_info size %d - addr %p\n", shmem_buf_info->size, shmem_buf_info->buffs[0].addr); |
| |
| shmem_handle = (struct ar_shmem_handle *)shmem_buf_info->buffs[0].metadata; |
| if (shmem_handle) { |
| if (flag == DATA_BUF) { |
| buf_info->data_buf_fd = shmem_handle->ion_mem_fd; |
| buf_info->data_buf_size = shmem_buf_info->size; |
| } |
| else { |
| buf_info->pos_buf_fd = shmem_handle->ion_mem_fd; |
| buf_info->pos_buf_size = shmem_buf_info->size; |
| } |
| } |
| |
| free_buffs: |
| free(shmem_buf_info->buffs); |
| free_shbuf_info: |
| free(shmem_buf_info); |
| return ret; |
| } |
| |
| int graph_get_buf_info(struct graph_obj *graph_obj, struct agm_buf_info *buf_info, uint32_t flag) |
| { |
| struct session_obj *sess_obj = NULL; |
| enum gsl_cmd_id cmd_id; |
| int ret = -EINVAL; |
| struct agm_buffer_config buffer_config = {0}; |
| |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object"); |
| return -EINVAL; |
| } |
| |
| sess_obj = graph_obj->sess_obj; |
| if (sess_obj == NULL) { |
| AGM_LOGE("invalid sess object"); |
| return -EINVAL; |
| } |
| if (sess_obj->stream_config.dir == TX) |
| buffer_config = sess_obj->in_buffer_config; |
| else |
| buffer_config = sess_obj->out_buffer_config; |
| |
| if ((buffer_config.count == 0) || |
| (buffer_config.size == 0)) { |
| AGM_LOGE("invalid buffer count or size"); |
| return -EINVAL; |
| } |
| |
| configure_buffer_params(graph_obj, sess_obj); |
| if (flag & DATA_BUF) { |
| if (sess_obj->stream_config.dir == RX) |
| cmd_id = GSL_CMD_GET_WRITE_BUFF_INFO; |
| else |
| cmd_id = GSL_CMD_GET_READ_BUFF_INFO; |
| |
| ret = graph_fill_buf_info(graph_obj, buf_info, cmd_id, DATA_BUF); |
| } |
| |
| if (flag & POS_BUF) { |
| if (sess_obj->stream_config.dir == RX) |
| cmd_id = GSL_CMD_GET_WRITE_POS_BUFF_INFO; |
| else |
| cmd_id = GSL_CMD_GET_READ_POS_BUFF_INFO; |
| |
| ret = graph_fill_buf_info(graph_obj, buf_info, cmd_id, POS_BUF); |
| } |
| return ret; |
| } |
| |
| int graph_set_gapless_metadata(struct graph_obj *graph_obj, |
| enum agm_gapless_silence_type type, |
| uint32_t silence) |
| { |
| int ret = 0; |
| struct listnode *node = NULL; |
| struct module_info *mod; |
| struct apm_module_param_data_t *header; |
| struct param_id_remove_initial_silence_t *pid_is; |
| struct param_id_remove_trailing_silence_t *pid_ts; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| uint32_t decoder_miid = 0; |
| |
| if (graph_obj == NULL){ |
| AGM_LOGE("invalid graph object\n"); |
| return -EINVAL; |
| } |
| pthread_mutex_lock(&graph_obj->lock); |
| |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| if (mod->tag == TAG_STREAM_PLACEHOLDER_DECODER) { |
| AGM_LOGD("Decoder module IID %x", mod->miid); |
| decoder_miid = mod->miid; |
| break; |
| } |
| } |
| if (decoder_miid == 0) { |
| AGM_LOGE("Decoder MIID not found"); |
| ret = -EINVAL; |
| goto done; |
| } |
| /* Send initial/trailing silence information */ |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_remove_initial_silence_t); |
| if (payload_size % 8 != 0) |
| payload_size = payload_size + (8 - payload_size % 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("No memory to allocate for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| header = (struct apm_module_param_data_t*)payload; |
| pid_is = (struct param_id_remove_initial_silence_t *)(payload |
| + sizeof(struct apm_module_param_data_t)); |
| header->error_code = 0x0; |
| header->param_size = payload_size; |
| header->module_instance_id = decoder_miid; |
| if (type == INITIAL_SILENCE) { |
| header->param_id = PARAM_ID_REMOVE_INITIAL_SILENCE; |
| } else if (type == TRAILING_SILENCE) { |
| header->param_id = PARAM_ID_REMOVE_TRAILING_SILENCE; |
| } else { |
| AGM_LOGE("Invalid gapless silence type %d", type); |
| goto error; |
| } |
| pid_is->samples_per_ch_to_remove = silence; |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret !=0) |
| AGM_LOGE("failed to set %d type silence with ret = %d", type, ret); |
| |
| error: |
| free(payload); |
| done: |
| pthread_mutex_unlock(&graph_obj->lock); |
| return ret; |
| } |
| |
| int graph_set_tag_data_to_acdb( |
| struct agm_key_vector_gsl *graph_key_vect, uint32_t tag_id, |
| struct agm_key_vector_gsl *tag_key_vect, uint8_t *payload, |
| uint32_t payload_size) |
| { |
| return gsl_set_tag_data_to_acdb((struct gsl_key_vector *)graph_key_vect, |
| tag_id, (struct gsl_key_vector *)tag_key_vect, |
| payload, payload_size); |
| } |
| |
| int graph_set_cal_data_to_acdb( |
| struct agm_key_vector_gsl *graph_key_vect, |
| struct agm_key_vector_gsl *cal_key_vect, uint8_t *payload, |
| uint32_t payload_size) |
| { |
| return gsl_set_cal_data_to_acdb((struct gsl_key_vector *)graph_key_vect, |
| (struct gsl_key_vector *)cal_key_vect, |
| payload, payload_size); |
| } |
| |
| int graph_get_tagged_data( |
| const struct agm_key_vector_gsl *graph_key_vect, uint32_t tag, |
| struct agm_key_vector_gsl *tag_key_vect, uint8_t *payload, |
| size_t *payload_size) |
| { |
| return gsl_get_tagged_data((struct gsl_key_vector *)graph_key_vect, |
| tag, (struct gsl_key_vector *)tag_key_vect, |
| payload, payload_size); |
| } |
| |
| int graph_enable_acdb_persistence(uint8_t enable_flag) |
| { |
| return gsl_enable_acdb_persistence(enable_flag); |
| } |