| /* |
| * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted (subject to the limitations in the |
| * disclaimer below) provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define LOG_TAG "AGM: graph_module" |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include "gsl_intf.h" |
| #include <agm/graph.h> |
| #include <agm/graph_module.h> |
| #include <agm/metadata.h> |
| #include <agm/utils.h> |
| |
| #ifdef DYNAMIC_LOG_ENABLED |
| #include <log_xml_parser.h> |
| #define LOG_MASK AGM_MOD_FILE_GRAPH_MODULE |
| #include <log_utils.h> |
| #endif |
| |
| #define MONO 1 |
| #define GET_BITS_PER_SAMPLE(format, bit_width) \ |
| (format == AGM_FORMAT_PCM_S24_LE? 32 : bit_width) |
| |
| /*qfactor should be set to 23 only for 24_3LE and 24_LE formats*/ |
| #define GET_Q_FACTOR(format, bit_width) (bit_width - 1) |
| |
| static void get_default_channel_map(uint8_t *channel_map, int channels) |
| { |
| switch (channels) { |
| case CHANNEL_1: |
| channel_map[0] = PCM_CHANNEL_C; |
| break; |
| case CHANNEL_2: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| break; |
| case CHANNEL_3: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_C; |
| break; |
| case CHANNEL_4: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_LB; |
| channel_map[3] = PCM_CHANNEL_RB; |
| break; |
| case CHANNEL_5: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_C; |
| channel_map[3] = PCM_CHANNEL_LB; |
| channel_map[4] = PCM_CHANNEL_RB; |
| break; |
| case CHANNEL_6: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_C; |
| channel_map[3] = PCM_CHANNEL_LFE; |
| channel_map[4] = PCM_CHANNEL_LB; |
| channel_map[5] = PCM_CHANNEL_RB; |
| break; |
| case CHANNEL_7: |
| /* |
| * Configured for 5.1 channel mapping + 1 channel for debug |
| * Can be customized based on DSP. |
| */ |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_C; |
| channel_map[3] = PCM_CHANNEL_LFE; |
| channel_map[4] = PCM_CHANNEL_LB; |
| channel_map[5] = PCM_CHANNEL_RB; |
| channel_map[6] = PCM_CHANNEL_CS; |
| break; |
| case CHANNEL_8: |
| channel_map[0] = PCM_CHANNEL_L; |
| channel_map[1] = PCM_CHANNEL_R; |
| channel_map[2] = PCM_CHANNEL_C; |
| channel_map[3] = PCM_CHANNEL_LFE; |
| channel_map[4] = PCM_CHANNEL_LB; |
| channel_map[5] = PCM_CHANNEL_RB; |
| channel_map[6] = PCM_CHANNEL_LS; |
| channel_map[7] = PCM_CHANNEL_RS; |
| } |
| } |
| |
| static bool is_format_pcm(enum agm_media_format fmt_id) |
| { |
| if (fmt_id >= AGM_FORMAT_PCM_S8 && fmt_id <= AGM_FORMAT_PCM_S32_LE) |
| return true; |
| |
| return false; |
| } |
| |
| static bool is_format_bypassed(enum agm_media_format fmt_id) |
| { |
| if (fmt_id == AGM_FORMAT_VORBIS) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| int get_pcm_bit_width(enum agm_media_format fmt_id) |
| { |
| int bit_width = 16; |
| |
| switch (fmt_id) { |
| case AGM_FORMAT_PCM_S24_3LE: |
| /* |
| *This api returns the number of audio data bit width specific to the format |
| *e.g. In S24_LE, even if the number of bytes is 4, the audio data is only in 3 bytes |
| *Hence we return 24 as the bit_width, whereas the bitspersample for this format would |
| *return 32 |
| */ |
| case AGM_FORMAT_PCM_S24_LE: |
| bit_width = 24; |
| break; |
| case AGM_FORMAT_PCM_S32_LE: |
| bit_width = 32; |
| break; |
| case AGM_FORMAT_PCM_S16_LE: |
| default: |
| break; |
| } |
| |
| return bit_width; |
| } |
| |
| static int get_media_bit_width(struct session_obj *sess_obj, |
| struct agm_media_config *media_config) |
| { |
| int bit_width = 16; |
| |
| if (is_format_pcm(media_config->format)) |
| return get_pcm_bit_width(media_config->format); |
| |
| switch (media_config->format) { |
| case AGM_FORMAT_FLAC: |
| bit_width = sess_obj->stream_config.codec.flac_dec.sample_size; |
| break; |
| case AGM_FORMAT_ALAC: |
| bit_width = sess_obj->stream_config.codec.alac_dec.bit_depth; |
| break; |
| case AGM_FORMAT_APE: |
| bit_width = sess_obj->stream_config.codec.ape_dec.bit_width; |
| break; |
| case AGM_FORMAT_WMASTD: |
| bit_width = sess_obj->stream_config.codec.wma_dec.bits_per_sample; |
| break; |
| case AGM_FORMAT_WMAPRO: |
| bit_width = sess_obj->stream_config.codec.wmapro_dec.bits_per_sample; |
| break; |
| case AGM_FORMAT_MP3: |
| case AGM_FORMAT_AAC: |
| default: |
| break; |
| } |
| |
| return bit_width; |
| } |
| |
| static int configure_codec_dma_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| hw_ep_info_t hw_ep_info = dev_obj->hw_ep_info; |
| struct apm_module_param_data_t *header; |
| struct param_id_codec_dma_intf_cfg_t* codec_config; |
| size_t payload_sz; |
| uint8_t *payload = NULL; |
| uint32_t *chmap = NULL; |
| struct agm_media_config media_config = (dev_obj->group_data) ? |
| dev_obj->group_data->media_config.config :dev_obj->media_config; |
| |
| AGM_LOGV("entry mod tag %x miid %x mid %x\n", mod->tag, mod->miid, mod->mid); |
| |
| payload_sz = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_codec_dma_intf_cfg_t); |
| |
| ALIGN_PAYLOAD(payload_sz, 8); |
| payload = (uint8_t*)calloc(1, (size_t)payload_sz); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| codec_config = (struct param_id_codec_dma_intf_cfg_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| ret = device_get_channel_map(dev_obj, &chmap); |
| if (ret || chmap == NULL) { |
| AGM_LOGE("get channel map failed"); |
| goto done; |
| } |
| |
| if (chmap[0] < media_config.channels) { |
| AGM_LOGE("Mismatch in num channels, expected %d, received %d", |
| media_config.channels, chmap[0]); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_CODEC_DMA_INTF_CFG; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_codec_dma_intf_cfg_t); |
| |
| codec_config->lpaif_type = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.lpaif_type; |
| codec_config->intf_indx = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.intf_idx; |
| /* chmap[0] contains num_ch and chmap[1] contains channelmap */ |
| codec_config->active_channels_mask = chmap[1]; |
| |
| AGM_LOGD("cdc_dma intf cfg lpaif %d indx %d ch_msk %x", |
| codec_config->lpaif_type, codec_config->intf_indx, |
| codec_config->active_channels_mask); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_sz); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| done: |
| if (chmap) |
| free(chmap); |
| |
| if (payload) |
| free(payload); |
| |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| static int configure_i2s_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| hw_ep_info_t hw_ep_info = dev_obj->hw_ep_info; |
| struct gsl_key_vector tag_key_vect; |
| struct apm_module_param_data_t *header; |
| struct param_id_i2s_intf_cfg_t* i2s_config; |
| size_t payload_sz, ret_payload_sz = 0; |
| uint8_t *payload = NULL; |
| struct agm_media_config media_config = (dev_obj->group_data) ? |
| dev_obj->group_data->media_config.config :dev_obj->media_config; |
| |
| AGM_LOGV("entry mod tag %x miid %x mid %x", mod->tag, mod->miid, mod->mid); |
| |
| payload_sz = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_i2s_intf_cfg_t); |
| |
| ALIGN_PAYLOAD(payload_sz, 8); |
| ret_payload_sz = payload_sz; |
| payload = (uint8_t*)calloc(1, (size_t)payload_sz); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| i2s_config = (struct param_id_i2s_intf_cfg_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| /* |
| * For Codec dma we need to configure the following tags |
| * 1.Channels - Channels are reused to derive the active channel mask |
| */ |
| tag_key_vect.num_kvps = 1; |
| tag_key_vect.kvp = calloc(tag_key_vect.num_kvps, |
| sizeof(struct gsl_key_value_pair)); |
| |
| if (!tag_key_vect.kvp) { |
| AGM_LOGE("Not enough memory for KVP"); |
| ret = -ENOMEM; |
| goto free_payload; |
| } |
| |
| tag_key_vect.kvp[0].key = CHANNELS; |
| tag_key_vect.kvp[0].value = media_config.channels; |
| |
| ret = gsl_get_tagged_data((struct gsl_key_vector *)mod->gkv, |
| mod->tag, &tag_key_vect, (uint8_t *)payload, |
| &ret_payload_sz); |
| |
| if (ret != 0) { |
| if (ret == AR_ENEEDMORE) |
| AGM_LOGE("payload buffer sz %zu smaller than expected size %zu", |
| payload_sz, ret_payload_sz); |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGD("get_tagged_data for module %d failed with error %d", |
| mod->tag, ret); |
| goto free_kvp; |
| } |
| |
| AGM_LOGV("hdr mid %x pid %x er_cd %x param_sz %d", |
| header->module_instance_id, header->param_id, header->error_code, |
| header->param_size); |
| |
| i2s_config->lpaif_type = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.lpaif_type; |
| i2s_config->intf_idx = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.intf_idx; |
| |
| AGM_LOGV("i2s intf cfg lpaif %d indx %d sd_ln_idx %x ws_src %d", |
| i2s_config->lpaif_type, i2s_config->intf_idx, |
| i2s_config->sd_line_idx, i2s_config->ws_src); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_sz); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free_kvp: |
| free(tag_key_vect.kvp); |
| free_payload: |
| free(payload); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int configure_tdm_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| hw_ep_info_t hw_ep_info = dev_obj->hw_ep_info; |
| struct gsl_key_vector tag_key_vect; |
| struct apm_module_param_data_t *header; |
| struct param_id_tdm_intf_cfg_t* tdm_config; |
| size_t payload_sz, ret_payload_sz = 0; |
| uint8_t *payload = NULL; |
| struct agm_media_config media_config = (dev_obj->group_data) ? |
| dev_obj->group_data->media_config.config :dev_obj->media_config; |
| |
| AGM_LOGV("entry mod tag %x miid %x mid %x", mod->tag, mod->miid, mod->mid); |
| |
| payload_sz = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_tdm_intf_cfg_t); |
| |
| ALIGN_PAYLOAD(payload_sz, 8); |
| ret_payload_sz = payload_sz; |
| payload = (uint8_t*)calloc(1, (size_t)payload_sz); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| tdm_config = (struct param_id_tdm_intf_cfg_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| /* |
| * For Codec dma we need to configure the following tags |
| * 1.Channels - Channels are reused to derive the active channel mask |
| */ |
| tag_key_vect.num_kvps = 1; |
| tag_key_vect.kvp = calloc(tag_key_vect.num_kvps, |
| sizeof(struct gsl_key_value_pair)); |
| |
| if (!tag_key_vect.kvp) { |
| AGM_LOGE("Not enough memory for KVP"); |
| ret = -ENOMEM; |
| goto free_payload; |
| } |
| |
| tag_key_vect.kvp[0].key = CHANNELS; |
| tag_key_vect.kvp[0].value = media_config.channels; |
| |
| ret = gsl_get_tagged_data((struct gsl_key_vector *)mod->gkv, |
| mod->tag, &tag_key_vect, (uint8_t *)payload, |
| &ret_payload_sz); |
| |
| if (ret != 0) { |
| if (ret == AR_ENEEDMORE) |
| AGM_LOGE("payload buffer sz %zu smaller than expected size %zu", |
| payload_sz, ret_payload_sz); |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGD("get_tagged_data for module %d failed with error %d", |
| mod->tag, ret); |
| goto free_kvp; |
| } |
| |
| tdm_config->lpaif_type = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.lpaif_type; |
| tdm_config->intf_idx = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.intf_idx; |
| |
| /* Update slot_mask from AGM only in case of group TDM */ |
| if (dev_obj->group_data) |
| tdm_config->slot_mask = dev_obj->group_data->media_config.slot_mask; |
| |
| AGM_LOGV("tdm intf cfg lpaif %d idx %d sync_src %d ctrl_dt_ot_enb %d", |
| tdm_config->lpaif_type, tdm_config->intf_idx, tdm_config->sync_src, |
| tdm_config->ctrl_data_out_enable); |
| AGM_LOGV("slt_msk %x nslts_per_frm %x slt_wdth %d sync_mode %d", |
| tdm_config->slot_mask, tdm_config->nslots_per_frame, |
| tdm_config->slot_width, tdm_config->sync_mode); |
| AGM_LOGV("inv_sync_pulse %d sync_data_delay %d", |
| tdm_config->ctrl_invert_sync_pulse, tdm_config->ctrl_sync_data_delay); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_sz); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free_kvp: |
| free(tag_key_vect.kvp); |
| free_payload: |
| free(payload); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int configure_aux_pcm_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| hw_ep_info_t hw_ep_info = dev_obj->hw_ep_info; |
| struct gsl_key_vector tag_key_vect; |
| struct apm_module_param_data_t *header; |
| |
| struct param_id_hw_pcm_intf_cfg_t* aux_pcm_cfg; |
| size_t payload_sz ,ret_payload_sz = 0; |
| uint8_t *payload = NULL; |
| |
| AGM_LOGV("entry mod tag %x miid %x mid %x", mod->tag, mod->miid, mod->mid); |
| |
| payload_sz = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_hw_pcm_intf_cfg_t); |
| |
| ALIGN_PAYLOAD(payload_sz, 8); |
| ret_payload_sz = payload_sz; |
| payload = (uint8_t*)calloc(1, (size_t)payload_sz); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| aux_pcm_cfg = (struct param_id_hw_pcm_intf_cfg_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| /* |
| * For Codec dma we need to configure the following tags |
| * 1.Channels - Channels are reused to derive the active channel mask |
| */ |
| tag_key_vect.num_kvps = 1; |
| tag_key_vect.kvp = calloc(tag_key_vect.num_kvps, |
| sizeof(struct gsl_key_value_pair)); |
| |
| if (!tag_key_vect.kvp) { |
| AGM_LOGE("Not enough memory for KVP"); |
| ret = -ENOMEM; |
| goto free_payload; |
| } |
| |
| tag_key_vect.kvp[0].key = CHANNELS; |
| tag_key_vect.kvp[0].value = dev_obj->media_config.channels; |
| |
| ret = gsl_get_tagged_data((struct gsl_key_vector *)mod->gkv, |
| mod->tag, &tag_key_vect, (uint8_t *)payload, |
| &ret_payload_sz); |
| |
| if (ret != 0) { |
| if (ret == AR_ENEEDMORE) |
| AGM_LOGE("payload buffer sz %zu smaller than expected size %zu", |
| payload_sz, ret_payload_sz); |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGD("get_tagged_data for module %d failed with error %d", |
| mod->tag, ret); |
| goto free_kvp; |
| } |
| |
| aux_pcm_cfg->lpaif_type = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.lpaif_type; |
| aux_pcm_cfg->intf_idx = hw_ep_info.ep_config.cdc_dma_i2s_tdm_config.intf_idx; |
| |
| AGM_LOGV("aux intf cfg lpaif %d idx %d sync_src %d ctrl_dt_ot_enb %d", |
| aux_pcm_cfg->lpaif_type, aux_pcm_cfg->intf_idx, aux_pcm_cfg->sync_src, |
| aux_pcm_cfg->ctrl_data_out_enable); |
| AGM_LOGV("slt_msk %x frm_setting %x aux_mode %d", |
| aux_pcm_cfg->slot_mask, aux_pcm_cfg->frame_setting, |
| aux_pcm_cfg->aux_mode); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_sz); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free_kvp: |
| free(tag_key_vect.kvp); |
| free_payload: |
| free(payload); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| static int configure_slimbus_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| hw_ep_info_t hw_ep_info = dev_obj->hw_ep_info; |
| struct apm_module_param_data_t *header; |
| struct param_id_slimbus_cfg_t* slimbus_cfg; |
| size_t payload_sz; |
| uint8_t *payload = NULL; |
| int i = 0; |
| uint32_t *chmap = NULL; |
| |
| AGM_LOGD("entry mod tag %x miid %x mid %x", mod->tag, mod->miid, mod->mid); |
| |
| if (dev_obj->media_config.channels > SB_MAX_CHAN_CNT) { |
| AGM_LOGE("device channels %d exceed max supported ch %d for Slimbus", |
| dev_obj->media_config.channels, SB_MAX_CHAN_CNT); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| payload_sz = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_slimbus_cfg_t); |
| |
| ALIGN_PAYLOAD(payload_sz, 8); |
| payload = (uint8_t*)calloc(1, (size_t)payload_sz); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| slimbus_cfg = (struct param_id_slimbus_cfg_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| ret = device_get_channel_map(dev_obj, &chmap); |
| if (ret || chmap == NULL) { |
| AGM_LOGE("get channel map failed"); |
| goto done; |
| } |
| |
| if (chmap[0] < dev_obj->media_config.channels) { |
| AGM_LOGE("Mismatch in num channels, expected %d, received %d", |
| dev_obj->media_config.channels, chmap[0]); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_SLIMBUS_CONFIG; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_slimbus_cfg_t); |
| slimbus_cfg->slimbus_dev_id = hw_ep_info.ep_config.slim_config.dev_id; |
| |
| AGM_LOGD("slimbus intf cfg dev id %d ch %d", slimbus_cfg->slimbus_dev_id, |
| dev_obj->media_config.channels); |
| for (i = 0; i < dev_obj->media_config.channels; i++) { |
| slimbus_cfg->shared_channel_mapping[i] = chmap[i + 1]; |
| AGM_LOGV("shared_chnl_mapping[%d] = 0x%x\n", i, slimbus_cfg->shared_channel_mapping[i]); |
| } |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_sz); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| done: |
| if (payload) |
| free(payload); |
| |
| if (chmap) |
| free(chmap); |
| |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int configure_hw_ep_media_config(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| struct apm_module_param_data_t* header; |
| struct param_id_hw_ep_mf_t* hw_ep_media_conf; |
| struct agm_media_config media_config = (dev_obj->group_data) ? |
| dev_obj->group_data->media_config.config :dev_obj->media_config; |
| |
| AGM_LOGD("entry mod tag %x miid %x mid %x",mod->tag, mod->miid, mod->mid); |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_hw_ep_mf_t); |
| |
| /*ensure that the payloadszie is byte multiple atleast*/ |
| ALIGN_PAYLOAD(payload_size, 8); |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("No memory to allocate for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| hw_ep_media_conf = (struct param_id_hw_ep_mf_t*) |
| (payload + sizeof(struct apm_module_param_data_t)); |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_HW_EP_MF_CFG; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_hw_ep_mf_t); |
| |
| hw_ep_media_conf->sample_rate = media_config.rate; |
| hw_ep_media_conf->bit_width = get_pcm_bit_width(media_config.format); |
| |
| hw_ep_media_conf->num_channels = media_config.channels; |
| hw_ep_media_conf->data_format = media_config.data_format; |
| |
| AGM_LOGD("rate %d bw %d ch %d, data_fmt %d", media_config.rate, |
| hw_ep_media_conf->bit_width, media_config.channels, |
| media_config.data_format); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free(payload); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int configure_hw_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct device_obj *dev_obj = mod->dev_obj; |
| |
| if(dev_obj->hw_ep_info.intf == PCM_RT_PROXY || dev_obj->hw_ep_info.intf == PCM_DUMMY) { |
| AGM_LOGD("no ep media config for %d\n", dev_obj->hw_ep_info.intf); |
| } |
| else { |
| ret = configure_hw_ep_media_config(mod, graph_obj); |
| if (ret) { |
| AGM_LOGE("hw_ep_media_config failed %d", ret); |
| return ret; |
| } |
| } |
| switch (dev_obj->hw_ep_info.intf) { |
| case CODEC_DMA: |
| ret = configure_codec_dma_ep(mod, graph_obj); |
| break; |
| case MI2S: |
| ret = configure_i2s_ep(mod, graph_obj); |
| break; |
| case AUXPCM: |
| ret = configure_aux_pcm_ep(mod, graph_obj); |
| break; |
| case TDM: |
| ret = configure_tdm_ep(mod, graph_obj); |
| break; |
| case SLIMBUS: |
| ret = configure_slimbus_ep(mod, graph_obj); |
| break; |
| case DISPLAY_PORT: |
| case USB_AUDIO: |
| AGM_LOGD("no ep configuration for %d\n", dev_obj->hw_ep_info.intf); |
| break; |
| case PCM_RT_PROXY: |
| AGM_LOGD("no ep configuration for %d\n", dev_obj->hw_ep_info.intf); |
| break; |
| case AUDIOSS_DMA: |
| AGM_LOGD("no ep configuration for %d\n", dev_obj->hw_ep_info.intf); |
| break; |
| case PCM_DUMMY: |
| AGM_LOGD("no ep configuration for %d\n", dev_obj->hw_ep_info.intf); |
| break; |
| default: |
| AGM_LOGE("hw intf %d not enabled yet", dev_obj->hw_ep_info.intf); |
| break; |
| } |
| return ret; |
| } |
| |
| /** |
| *PCM DECODER/ENCODER and PCM CONVERTER are configured with the |
| *same PCM_FORMAT_CFG hence reuse the implementation |
| */ |
| int configure_output_media_format(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| struct media_format_t *media_fmt_hdr; |
| struct payload_pcm_output_format_cfg_t *pcm_output_fmt_payload; |
| struct apm_module_param_data_t *header; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| uint8_t *channel_map; |
| int ret = 0; |
| int num_channels = MONO; |
| struct agm_media_config media_config = {0}; |
| |
| /*We use in_media_config for Record usecases or |
| *if it is NON_TUNNEL_MODE decode usecase otherwise |
| *out_media_config is used to configure PCM_Convertor |
| */ |
| if ((sess_obj->stream_config.dir == TX) || |
| ((sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) && |
| (is_format_pcm(sess_obj->in_media_config.format)))) { |
| media_config = sess_obj->in_media_config; |
| } |
| else |
| media_config = sess_obj->out_media_config; |
| |
| AGM_LOGD("entry mod tag %x miid %x mid %x",mod->tag, mod->miid, mod->mid); |
| num_channels = media_config.channels; |
| |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t) + |
| sizeof(struct payload_pcm_output_format_cfg_t) + |
| sizeof(uint8_t)*num_channels; |
| |
| /*ensure that the payloadszie is byte multiple atleast*/ |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| |
| header = (struct apm_module_param_data_t*)payload; |
| |
| media_fmt_hdr = (struct media_format_t*)(payload + |
| sizeof(struct apm_module_param_data_t)); |
| pcm_output_fmt_payload = (struct payload_pcm_output_format_cfg_t*)(payload + |
| sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t)); |
| |
| channel_map = (uint8_t*)(payload + sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t) + |
| sizeof(struct payload_pcm_output_format_cfg_t)); |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_PCM_OUTPUT_FORMAT_CFG; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct media_format_t) + |
| sizeof(struct payload_pcm_output_format_cfg_t) + |
| sizeof(uint8_t)*num_channels; |
| |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_FIXED_POINT; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_PCM; |
| media_fmt_hdr->payload_size = |
| (uint32_t)(sizeof(payload_pcm_output_format_cfg_t) + |
| sizeof(uint8_t) * num_channels); |
| |
| pcm_output_fmt_payload->endianness = PCM_LITTLE_ENDIAN; |
| |
| pcm_output_fmt_payload->bit_width = get_media_bit_width(sess_obj, &media_config); |
| |
| /** |
| *alignment field is referred to only in case where bit width is |
| *24 and bits per sample is 32, tiny alsa only supports 24 bit |
| *in 32 word size in LSB aligned mode(AGM_FORMAT_PCM_S24_LE). |
| *Hence we hardcode this to PCM_LSB_ALIGNED; |
| */ |
| pcm_output_fmt_payload->alignment = PCM_LSB_ALIGNED; |
| pcm_output_fmt_payload->num_channels = num_channels; |
| |
| if (((sess_obj->stream_config.dir == TX) || |
| ((sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) && mod->module == MODULE_PCM_CONVERTER)) && |
| is_format_pcm(media_config.format)) { |
| /*for PCM capture usecase, we want native data to be captured hence |
| *configure pcm convertor accordingly |
| *Also in case of Non Tunnel Mode decode, we configure PCM_CONVERTOR with |
| *media config same as what is configured by client on the read path. |
| *We have added the module check above to ensure that the decoder |
| *PCM_OUTPUT_FORMAT_CFG is configured in the else part. |
| */ |
| pcm_output_fmt_payload->bits_per_sample = |
| GET_BITS_PER_SAMPLE(media_config.format, |
| pcm_output_fmt_payload->bit_width); |
| |
| pcm_output_fmt_payload->q_factor = |
| GET_Q_FACTOR(media_config.format, |
| pcm_output_fmt_payload->bit_width); |
| if (sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) |
| /* |
| * Setting num channels to native mode for PCM convetter |
| * so that channels always match upstream decoder module |
| * channel configuration |
| */ |
| pcm_output_fmt_payload->num_channels = PARAM_VAL_NATIVE; |
| } else { |
| switch (pcm_output_fmt_payload->bit_width) { |
| case 16: |
| case 32: |
| pcm_output_fmt_payload->bits_per_sample = |
| pcm_output_fmt_payload->bit_width; |
| pcm_output_fmt_payload->q_factor = |
| pcm_output_fmt_payload->bit_width - 1; |
| break; |
| case 24: |
| /* |
| *modules after pcm convertor only work on 16 or 32bit samples hence |
| *even for 24 bit input data configure pcm convertor output with |
| *32 bits per sample also to accomodate post processing, SPF |
| *tean recommends to set the q_factor as 27 even for 24_LE/24_3LE formats |
| *This is to be done only for pcm_convertor on the playback path |
| */ |
| pcm_output_fmt_payload->bits_per_sample = 32; |
| pcm_output_fmt_payload->q_factor = 27; |
| break; |
| default: |
| AGM_LOGE("wrong bitwidth %d", pcm_output_fmt_payload->bit_width); |
| ret = -EINVAL; |
| goto done; |
| } |
| } |
| |
| if (sess_obj->stream_config.dir == RX) |
| pcm_output_fmt_payload->interleaved = PCM_DEINTERLEAVED_UNPACKED; |
| else |
| pcm_output_fmt_payload->interleaved = PCM_INTERLEAVED; |
| |
| /** |
| *#TODO:As of now channel_map is not part of media_config |
| *ADD channel map part as part of the session/device media config |
| *structure and use that channel map if set by client otherwise |
| * use the default channel map |
| */ |
| get_default_channel_map(channel_map, num_channels); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| done: |
| if (payload) { |
| free(payload); |
| } |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| static int configure_pcm_encoder_frame_size(struct module_info *mod, |
| struct graph_obj *graph_obj, |
| uint32_t frame_size_samples) |
| { |
| struct apm_module_param_data_t *header; |
| struct param_id_pcm_encoder_frame_size_t *frame_size_payload; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| int ret = 0; |
| |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_pcm_encoder_frame_size_t); |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| return -ENOMEM; |
| } |
| header = (struct apm_module_param_data_t*)payload; |
| frame_size_payload = (struct param_id_pcm_encoder_frame_size_t*)(payload + |
| sizeof(struct apm_module_param_data_t)); |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_PCM_ENCODER_FRAME_SIZE; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_pcm_encoder_frame_size_t); |
| |
| frame_size_payload->frame_size_type = 1; /* frame_size_in_samples */ |
| frame_size_payload->frame_size_in_samples = frame_size_samples; |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("pcm encoder frame size config for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free(payload); |
| return ret; |
| } |
| |
| int configure_pcm_encoder_params(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| uint32_t samples_per_msec = 0, frame_size = 0; |
| uint32_t channels = MONO, bits = 16; |
| |
| /* configure output media format */ |
| ret = configure_output_media_format(mod, graph_obj); |
| if (ret) |
| return ret; |
| |
| /* configure pcm encoder frame size */ |
| if (sess_obj->stream_config.sess_mode != AGM_SESSION_NON_TUNNEL) { |
| samples_per_msec = sess_obj->in_media_config.rate/1000; |
| channels = sess_obj->in_media_config.channels; |
| bits = get_pcm_bit_width(sess_obj->in_media_config.format); |
| bits = GET_BITS_PER_SAMPLE(sess_obj->in_media_config.format, bits); |
| channels = (channels == 0) ? MONO : channels; |
| frame_size = (sess_obj->in_buffer_config.size * 8) / |
| (channels * bits); |
| |
| if (samples_per_msec && |
| (((frame_size * 1000) % sess_obj->in_media_config.rate) != 0)) { |
| AGM_LOGD("pcm encoder: frame_size %d\n", frame_size); |
| ret = configure_pcm_encoder_frame_size(mod, graph_obj, frame_size); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int get_media_fmt_id_and_size(enum agm_media_format fmt_id, |
| size_t *payload_size, size_t *real_fmt_id) |
| { |
| int ret = 0; |
| size_t format_size = 0; |
| |
| if (is_format_pcm(fmt_id)) { |
| format_size = sizeof(struct payload_media_fmt_pcm_t);; |
| *real_fmt_id = MEDIA_FMT_PCM; |
| goto pl_size; |
| } |
| |
| switch (fmt_id) { |
| case AGM_FORMAT_MP3: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_MP3; |
| break; |
| case AGM_FORMAT_AAC: |
| format_size = sizeof(struct payload_media_fmt_aac_t); |
| *real_fmt_id = MEDIA_FMT_AAC; |
| break; |
| case AGM_FORMAT_FLAC: |
| format_size = sizeof(struct payload_media_fmt_flac_t); |
| *real_fmt_id = MEDIA_FMT_FLAC; |
| break; |
| case AGM_FORMAT_ALAC: |
| format_size = sizeof(struct payload_media_fmt_alac_t); |
| *real_fmt_id = MEDIA_FMT_ALAC; |
| break; |
| case AGM_FORMAT_APE: |
| format_size = sizeof(struct payload_media_fmt_ape_t); |
| *real_fmt_id = MEDIA_FMT_APE; |
| break; |
| case AGM_FORMAT_WMASTD: |
| format_size = sizeof(struct payload_media_fmt_wmastd_t); |
| *real_fmt_id = MEDIA_FMT_WMASTD; |
| break; |
| case AGM_FORMAT_WMAPRO: |
| format_size = sizeof(struct payload_media_fmt_wmapro_t); |
| *real_fmt_id = MEDIA_FMT_WMAPRO; |
| break; |
| case AGM_FORMAT_VORBIS: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_VORBIS; |
| break; |
| case AGM_FORMAT_AMR_NB: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_AMRNB; |
| break; |
| case AGM_FORMAT_AMR_WB: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_AMRWB; |
| break; |
| case AGM_FORMAT_AMR_WB_PLUS: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_AMRWBPLUS; |
| break; |
| case AGM_FORMAT_EVRC: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_EVRC; |
| break; |
| case AGM_FORMAT_G711: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_G711; |
| break; |
| case AGM_FORMAT_QCELP: |
| format_size = 0; |
| *real_fmt_id = MEDIA_FMT_QCELP; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pl_size: |
| *payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t) + format_size; |
| |
| return ret; |
| } |
| |
| |
| int set_compressed_media_format(enum agm_media_format fmt_id, |
| struct media_format_t *media_fmt_hdr, |
| struct session_obj *sess_obj) |
| { |
| int ret = 0; |
| size_t fmt_size = 0; |
| |
| switch (fmt_id) { |
| case AGM_FORMAT_MP3: |
| { |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_MP3; |
| media_fmt_hdr->payload_size = 0; |
| break; |
| } |
| case AGM_FORMAT_AAC: |
| { |
| struct payload_media_fmt_aac_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_aac_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_AAC; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = |
| (struct payload_media_fmt_aac_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.aac_dec, |
| fmt_size); |
| AGM_LOGD("AAC payload: fmt:%d, Obj_type:%d, ch:%d, SR:%d", |
| fmt_pl->aac_fmt_flag, fmt_pl->audio_obj_type, |
| fmt_pl->num_channels, fmt_pl->sample_rate); |
| break; |
| } |
| case AGM_FORMAT_FLAC: |
| { |
| struct payload_media_fmt_flac_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_flac_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_FLAC; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = (struct payload_media_fmt_flac_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.flac_dec, |
| fmt_size); |
| AGM_LOGD("FLAC payload: ch:%d, sample_size:%d, SR:%d", |
| fmt_pl->num_channels, fmt_pl->sample_size, fmt_pl->sample_rate); |
| break; |
| } |
| case AGM_FORMAT_ALAC: |
| { |
| struct payload_media_fmt_alac_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_alac_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_ALAC; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = (struct payload_media_fmt_alac_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.alac_dec, |
| fmt_size); |
| AGM_LOGD("ALAC payload: bit_depth:%d, ch:%d, SR:%d", |
| fmt_pl->bit_depth, fmt_pl->num_channels, |
| fmt_pl->sample_rate); |
| break; |
| } |
| case AGM_FORMAT_APE: |
| { |
| struct payload_media_fmt_ape_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_ape_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_APE; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = (struct payload_media_fmt_ape_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.ape_dec, |
| fmt_size); |
| AGM_LOGD("APE payload: bit_width:%d, ch:%d, SR:%d", |
| fmt_pl->bit_width, fmt_pl->num_channels, |
| fmt_pl->sample_rate); |
| break; |
| } |
| case AGM_FORMAT_WMASTD: |
| { |
| struct payload_media_fmt_wmastd_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_wmastd_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_WMASTD; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = (struct payload_media_fmt_wmastd_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.wma_dec, |
| fmt_size); |
| AGM_LOGD("WMA payload: fmt:%d, ch:%d, SR:%d, bit_width:%d", |
| fmt_pl->fmt_tag, fmt_pl->num_channels, |
| fmt_pl->sample_rate, fmt_pl->bits_per_sample); |
| break; |
| } |
| case AGM_FORMAT_WMAPRO: |
| { |
| struct payload_media_fmt_wmapro_t *fmt_pl; |
| fmt_size = sizeof(struct payload_media_fmt_wmapro_t); |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_RAW_COMPRESSED ; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_WMAPRO; |
| media_fmt_hdr->payload_size = fmt_size; |
| |
| fmt_pl = (struct payload_media_fmt_wmapro_t*)(((uint8_t*)media_fmt_hdr) + |
| sizeof(struct media_format_t)); |
| memcpy(fmt_pl, &sess_obj->stream_config.codec.wmapro_dec, |
| fmt_size); |
| AGM_LOGD("WMAPro payload: fmt:%d, ch:%d, SR:%d, bit_width:%d", |
| fmt_pl->fmt_tag, fmt_pl->num_channels, |
| fmt_pl->sample_rate, fmt_pl->bits_per_sample); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| *Configure placeholder decoder |
| */ |
| int configure_placeholder_dec(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct gsl_key_vector tkv; |
| struct session_obj *sess_obj = NULL; |
| size_t payload_size = 0, real_fmt_id = 0; |
| |
| AGM_LOGE("enter"); |
| memset(&tkv, 0, sizeof(struct gsl_key_vector)); |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object"); |
| goto done; |
| } |
| sess_obj = graph_obj->sess_obj; |
| /* 1. Configure placeholder decoder with Real ID */ |
| ret = get_media_fmt_id_and_size(sess_obj->out_media_config.format, |
| &payload_size, &real_fmt_id); |
| if (ret) { |
| AGM_LOGD("module is not configured for format: %d\n", |
| sess_obj->out_media_config.format); |
| /* If ret is non-zero then placeholder module would be |
| * configured by client so return from here. |
| */ |
| ret = 0; |
| goto done; |
| } |
| |
| tkv.num_kvps = 1; |
| tkv.kvp = calloc(tkv.num_kvps, sizeof(struct gsl_key_value_pair)); |
| if (!tkv.kvp) { |
| AGM_LOGE("Not enough memory for tkv.kvp\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| tkv.kvp->key = MEDIA_FMT_ID; |
| tkv.kvp->value = real_fmt_id; |
| |
| AGM_LOGD("Placeholder mod TKV key:%0x value: %0x", tkv.kvp->key, |
| tkv.kvp->value); |
| ret = gsl_set_config(graph_obj->graph_handle, (struct gsl_key_vector *)mod->gkv, |
| TAG_STREAM_PLACEHOLDER_DECODER, &tkv); |
| |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("set_config command failed with error: %d", ret); |
| goto done; |
| } |
| |
| /* 2. Set output media format cfg for placeholder decoder */ |
| ret = configure_output_media_format(mod, graph_obj); |
| if (ret != 0) |
| AGM_LOGE("output_media_format cfg failed: %d", ret); |
| |
| done: |
| if (tkv.kvp) |
| free(tkv.kvp); |
| AGM_LOGE("exit, ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| *Configure placeholder encoder |
| */ |
| int configure_placeholder_enc(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct gsl_key_vector tkv; |
| struct session_obj *sess_obj = NULL; |
| |
| size_t payload_size = 0, real_fmt_id = 0; |
| |
| AGM_LOGE("enter"); |
| if (graph_obj == NULL) { |
| AGM_LOGE("invalid graph object"); |
| return -EINVAL; |
| } |
| sess_obj = graph_obj->sess_obj; |
| |
| /* 1. Configure placeholder encoder with Real ID */ |
| ret = get_media_fmt_id_and_size(sess_obj->in_media_config.format, |
| &payload_size, &real_fmt_id); |
| if (ret) { |
| AGM_LOGD("module is not configured for format: %d\n", |
| sess_obj->in_media_config.format); |
| /* If ret is non-zero then placeholder module would be |
| * configured by client so return from here. |
| */ |
| return 0; |
| } |
| |
| tkv.num_kvps = 1; |
| tkv.kvp = calloc(tkv.num_kvps, sizeof(struct gsl_key_value_pair)); |
| if (!tkv.kvp) { |
| AGM_LOGE("Not enough memory for tkv.kvp\n"); |
| return -ENOMEM; |
| } |
| tkv.kvp->key = MEDIA_FMT_ID; |
| tkv.kvp->value = real_fmt_id; |
| |
| AGM_LOGD("Placeholder mod TKV key:%0x value: %0x", tkv.kvp->key, |
| tkv.kvp->value); |
| ret = gsl_set_config(graph_obj->graph_handle, (struct gsl_key_vector *)mod->gkv, |
| TAG_STREAM_PLACEHOLDER_ENCODER, &tkv); |
| |
| if (tkv.kvp) |
| free(tkv.kvp); |
| |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("set_config command failed with error: %d", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| |
| int configure_compress_shared_mem_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| struct media_format_t *media_fmt_hdr; |
| struct apm_module_param_data_t *header; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0, real_fmt_id = 0; |
| size_t actual_param_sz = 0; |
| |
| if (is_format_bypassed(sess_obj->out_media_config.format) || |
| sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) { |
| AGM_LOGI("bypass shared mem ep config for format %x or sess_mode %d", |
| sess_obj->out_media_config.format, sess_obj->stream_config.sess_mode); |
| return 0; |
| } |
| |
| ret = get_media_fmt_id_and_size(sess_obj->out_media_config.format, |
| &payload_size, &real_fmt_id); |
| if (ret) { |
| AGM_LOGD("module is not configured for format: %d\n", |
| sess_obj->out_media_config.format); |
| /* If ret is non-zero then shared memory module would be |
| * configured by client so return from here. |
| */ |
| return 0; |
| } |
| /* |
| *We get the actual size of the PID being sent before the payload_size |
| *is updated for 8 byte alignment. |
| */ |
| actual_param_sz = payload_size - sizeof(struct apm_module_param_data_t); |
| |
| /*ensure that the payloadsize is byte multiple atleast*/ |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| return -ENOMEM; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| |
| media_fmt_hdr = (struct media_format_t*)(payload + |
| sizeof(struct apm_module_param_data_t)); |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_MEDIA_FORMAT; |
| header->error_code = 0x0; |
| header->param_size = actual_param_sz; |
| |
| ret = set_compressed_media_format(sess_obj->out_media_config.format, |
| media_fmt_hdr, sess_obj); |
| if (ret) { |
| AGM_LOGD("Shared mem EP is not configured for format: %d\n", |
| sess_obj->out_media_config.format); |
| /* If ret is non-zero then shared memory module would be |
| * configured by client so return from here. |
| */ |
| goto free_payload; |
| } |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| |
| free_payload: |
| free(payload); |
| return ret; |
| } |
| |
| static int configure_compress_shared_mem_ep_datapath(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| struct media_format_t *media_fmt_hdr; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0, real_fmt_id = 0; |
| struct agm_buff buffer = {0}; |
| size_t consumed_size = 0; |
| |
| if (is_format_bypassed(sess_obj->out_media_config.format) || |
| sess_obj->stream_config.sess_mode == AGM_SESSION_NON_TUNNEL) { |
| AGM_LOGI("bypass shared mem ep config for format %x or sess_mode %d", |
| sess_obj->out_media_config.format, sess_obj->stream_config.sess_mode); |
| return 0; |
| } |
| |
| ret = get_media_fmt_id_and_size(sess_obj->out_media_config.format, |
| &payload_size, &real_fmt_id); |
| if (ret) { |
| AGM_LOGD("module is not configured for format: %d\n", |
| sess_obj->out_media_config.format); |
| /* If ret is non-zero then shared memory module would be |
| * configured by client so return from here. |
| */ |
| return 0; |
| } |
| |
| payload_size = payload_size - sizeof(struct apm_module_param_data_t); |
| media_fmt_hdr = (struct media_format_t *) calloc(1, (size_t)payload_size); |
| if (!media_fmt_hdr) { |
| AGM_LOGE("Not enough memory for payload\n"); |
| return -ENOMEM; |
| } |
| |
| |
| buffer.timestamp = 0x0; |
| buffer.flags = AGM_BUFF_FLAG_MEDIA_FORMAT; |
| buffer.size = payload_size; |
| buffer.addr = (uint8_t *)media_fmt_hdr; |
| |
| ret = set_compressed_media_format(sess_obj->out_media_config.format, |
| media_fmt_hdr, sess_obj); |
| if (ret) { |
| AGM_LOGD("Shared mem EP is not configured for format: %d\n", |
| sess_obj->out_media_config.format); |
| /* If ret is non-zero then shared memory module would be |
| * configured by client so return from here. |
| */ |
| goto free_payload; |
| } |
| |
| ret = graph_write(graph_obj, &buffer, &consumed_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| |
| free_payload: |
| free(media_fmt_hdr); |
| return ret; |
| } |
| |
| int configure_pcm_shared_mem_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| struct media_format_t *media_fmt_hdr; |
| struct apm_module_param_data_t *header; |
| struct payload_media_fmt_pcm_t *media_fmt_payload; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| int num_channels = MONO; |
| uint8_t *channel_map; |
| |
| AGM_LOGD("entry mod tag %x miid %x mid %x",mod->tag, mod->miid, mod->mid); |
| num_channels = sess_obj->out_media_config.channels; |
| |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t) + |
| sizeof(struct payload_media_fmt_pcm_t) + |
| sizeof(uint8_t)*num_channels; |
| |
| /*ensure that the payloadszie is byte multiple atleast*/ |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1,(size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| |
| media_fmt_hdr = (struct media_format_t*)(payload + |
| sizeof(struct apm_module_param_data_t)); |
| media_fmt_payload = (struct payload_media_fmt_pcm_t*)(payload + |
| sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t)); |
| |
| channel_map = (uint8_t*)(payload + sizeof(struct apm_module_param_data_t) + |
| sizeof(struct media_format_t) + |
| sizeof(struct payload_media_fmt_pcm_t)); |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_MEDIA_FORMAT; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct media_format_t) + |
| sizeof(struct payload_media_fmt_pcm_t) + |
| sizeof(uint8_t)*num_channels; |
| |
| media_fmt_hdr->data_format = AGM_DATA_FORMAT_FIXED_POINT; |
| media_fmt_hdr->fmt_id = MEDIA_FMT_ID_PCM; |
| media_fmt_hdr->payload_size = (uint32_t)(sizeof(payload_media_fmt_pcm_t) + |
| sizeof(uint8_t) * num_channels); |
| |
| media_fmt_payload->endianness = PCM_LITTLE_ENDIAN; |
| media_fmt_payload->bit_width = get_pcm_bit_width(sess_obj->out_media_config.format); |
| media_fmt_payload->sample_rate = sess_obj->out_media_config.rate; |
| /** |
| *alignment field is referred to only in case where bit width is |
| *24 and bits per sample is 32, tiny alsa only supports 24 bit |
| *in 32 word size in LSB aligned mode(AGM_FORMAT_PCM_S24_LE). |
| *Hence we hardcode this to PCM_LSB_ALIGNED; |
| */ |
| media_fmt_payload->alignment = PCM_LSB_ALIGNED; |
| media_fmt_payload->num_channels = num_channels; |
| media_fmt_payload->bits_per_sample = |
| GET_BITS_PER_SAMPLE(sess_obj->out_media_config.format, |
| media_fmt_payload->bit_width); |
| media_fmt_payload->q_factor = GET_Q_FACTOR(sess_obj->out_media_config.format, |
| media_fmt_payload->bit_width); |
| /** |
| *#TODO:As of now channel_map is not part of media_config |
| *ADD channel map part as part of the session/device media config |
| *structure and use that channel map if set by client otherwise |
| * use the default channel map |
| */ |
| get_default_channel_map(channel_map, num_channels); |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| done: |
| if (payload) { |
| free(payload); |
| } |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| int configure_wr_shared_mem_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| |
| /* |
| *This is for the write shared mem endpoint, |
| *hence we use out media config. |
| */ |
| if (is_format_pcm(sess_obj->out_media_config.format)) |
| ret = configure_pcm_shared_mem_ep(mod, graph_obj); |
| else { |
| if (graph_obj->state != STARTED) |
| ret = configure_compress_shared_mem_ep(mod, graph_obj); |
| else |
| ret = configure_compress_shared_mem_ep_datapath(mod, graph_obj); |
| } |
| |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| int configure_rd_shared_mem_ep(struct module_info *mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| struct session_obj *sess_obj = graph_obj->sess_obj; |
| struct apm_module_param_data_t *header; |
| struct param_id_rd_sh_mem_cfg_t *rd_sh_mem_cfg; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| |
| /* |
| *Note: read shared mem ep is configured only in case of non-tunnel |
| *decode sessions where the client has configured the session with |
| *AGM_SESSION_FLAG_INBAND_SRCM flag |
| *In case of non-tunnel encode sessions, we set the num_frames_per_buff cfg |
| *as a part of calibration itself. |
| */ |
| if (!(sess_obj->stream_config.sess_flags & AGM_SESSION_FLAG_INBAND_SRCM)) |
| goto done; |
| |
| AGM_LOGD("entry mod tag %x miid %x mid %x sess_flags %x",mod->tag, mod->miid, mod->mid, |
| sess_obj->stream_config.sess_flags); |
| |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_rd_sh_mem_cfg_t); |
| |
| /*ensure that the payloadszie is byte multiple atleast*/ |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1,(size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("Not enough memory for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| header = (struct apm_module_param_data_t*)payload; |
| |
| rd_sh_mem_cfg = (struct param_id_rd_sh_mem_cfg_t *)(payload |
| + sizeof(struct apm_module_param_data_t)); |
| |
| header->module_instance_id = mod->miid; |
| header->param_id = PARAM_ID_RD_SH_MEM_CFG; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_rd_sh_mem_cfg_t); |
| |
| /* |
| *In NT mode session in_media config represents config for data being captured |
| *Hence for NT Mode decode it would mean PCM data. |
| */ |
| if (is_format_pcm(sess_obj->in_media_config.format)) |
| rd_sh_mem_cfg->num_frames_per_buffer = 0x0; /*As many frames as possible*/ |
| else |
| /*TODO:This is encode usecase hence ideally client wont enable SRCM event |
| *Even if the client wants it enabled, then we configure 1 frame every for |
| *every read call; |
| */ |
| rd_sh_mem_cfg->num_frames_per_buffer = 0x1; |
| |
| rd_sh_mem_cfg->metadata_control_flags = 0x2; /*ENABLE_MEDIA_FORMAT_MD*/ |
| |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("custom_config command for module %d failed with error %d", |
| mod->tag, ret); |
| } |
| free(payload); |
| done: |
| AGM_LOGD("exit, ret %d", ret); |
| return ret; |
| } |
| |
| |
| int configure_spr(struct module_info *spr_mod, |
| struct graph_obj *graph_obj) |
| { |
| int ret = 0; |
| |
| struct listnode *node = NULL; |
| struct module_info *mod; |
| struct apm_module_param_data_t *header; |
| struct param_id_spr_delay_path_end_t *spr_hwep_delay; |
| uint8_t *payload = NULL; |
| size_t payload_size = 0; |
| |
| AGM_LOGD("SPR module IID %x", spr_mod->miid); |
| graph_obj->spr_miid = spr_mod->miid; |
| payload_size = sizeof(struct apm_module_param_data_t) + |
| sizeof(struct param_id_spr_delay_path_end_t); |
| ALIGN_PAYLOAD(payload_size, 8); |
| |
| payload = calloc(1, (size_t)payload_size); |
| if (!payload) { |
| AGM_LOGE("No memory to allocate for payload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| header = (struct apm_module_param_data_t*)payload; |
| spr_hwep_delay = (struct param_id_spr_delay_path_end_t *)(payload |
| + sizeof(struct apm_module_param_data_t)); |
| header->module_instance_id = spr_mod->miid; |
| header->param_id = PARAM_ID_SPR_DELAY_PATH_END; |
| header->error_code = 0x0; |
| header->param_size = sizeof(struct param_id_spr_delay_path_end_t); |
| |
| list_for_each(node, &graph_obj->tagged_mod_list) { |
| mod = node_to_item(node, module_info_t, list); |
| if (mod->tag == DEVICE_HW_ENDPOINT_RX) { |
| AGM_LOGD("HW EP module IID %x", mod->miid); |
| spr_hwep_delay->module_instance_id = mod->miid; |
| ret = gsl_set_custom_config(graph_obj->graph_handle, payload, payload_size); |
| if (ret !=0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("graph_set_custom_config failed %d", ret); |
| } |
| } |
| } |
| done: |
| if (payload) |
| free(payload); |
| return ret; |
| } |
| |
| int configure_gapless(struct module_info *gapless_mod, |
| struct graph_obj *gph_obj) |
| { |
| int ret = 0; |
| struct gsl_cmd_register_custom_event *reg_ev_payload = NULL; |
| size_t payload_size = 0; |
| |
| AGM_LOGD("GAPLESS module \n"); |
| |
| if (gph_obj->graph_handle == NULL) { |
| pthread_mutex_unlock(&gph_obj->lock); |
| AGM_LOGE("invalid graph handle\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| payload_size = sizeof(struct gsl_cmd_register_custom_event); |
| |
| reg_ev_payload = calloc(1, payload_size); |
| if (reg_ev_payload == NULL) { |
| pthread_mutex_unlock(&gph_obj->lock); |
| AGM_LOGE("calloc failed for reg_ev_payload\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| AGM_LOGD("GAPLESS module IID = %d\n", gapless_mod->miid); |
| |
| reg_ev_payload->event_id = EVENT_ID_EARLY_EOS; |
| // Write shared memory end point module IID |
| reg_ev_payload->module_instance_id = gapless_mod->miid; |
| // No payload for early eos registration |
| reg_ev_payload->event_config_payload_size = 0; |
| reg_ev_payload->is_register = 1; |
| |
| ret = gsl_ioctl(gph_obj->graph_handle, GSL_CMD_REGISTER_CUSTOM_EVENT, |
| reg_ev_payload, payload_size); |
| if (ret != 0) { |
| ret = ar_err_get_lnx_err_code(ret); |
| AGM_LOGE("Early EOS event registration failed with error %d\n", ret); |
| } |
| |
| done: |
| if (reg_ev_payload) |
| free(reg_ev_payload); |
| return ret; |
| } |
| |
| |
| module_info_t stream_module_list[] = { |
| { |
| .module = MODULE_PCM_ENCODER, |
| .tag = STREAM_PCM_ENCODER, |
| .configure = configure_pcm_encoder_params, |
| }, |
| { |
| .module = MODULE_PCM_DECODER, |
| .tag = STREAM_PCM_DECODER, |
| .configure = configure_output_media_format, |
| }, |
| { |
| .module = MODULE_PLACEHOLDER_ENCODER, |
| .tag = TAG_STREAM_PLACEHOLDER_ENCODER, |
| .configure = configure_placeholder_enc, |
| }, |
| { |
| .module = MODULE_PLACEHOLDER_DECODER, |
| .tag = TAG_STREAM_PLACEHOLDER_DECODER, |
| .configure = configure_placeholder_dec, |
| }, |
| { |
| .module = MODULE_PCM_CONVERTER, |
| .tag = STREAM_PCM_CONVERTER, |
| .configure = configure_output_media_format, |
| }, |
| { |
| .module = MODULE_WR_SHARED_MEM, |
| .tag = STREAM_INPUT_MEDIA_FORMAT, |
| .configure = configure_wr_shared_mem_ep, |
| }, |
| { |
| .module = MODULE_STREAM_PAUSE, |
| .tag = TAG_PAUSE, |
| .configure = NULL, |
| }, |
| { |
| .module = MODULE_STREAM_SPR, |
| .tag = TAG_STREAM_SPR, |
| .configure = configure_spr, |
| }, |
| { |
| .module = MODULE_STREAM_GAPLESS, |
| .tag = MODULE_GAPLESS, |
| .configure = configure_gapless, |
| }, |
| { |
| .module = MODULE_RD_SHARED_MEM, |
| .tag = RD_SHMEM_ENDPOINT, |
| .configure = configure_rd_shared_mem_ep, |
| }, |
| }; |
| |
| module_info_t hw_ep_module[] = { |
| { |
| .module = MODULE_HW_EP_RX, |
| .tag = DEVICE_HW_ENDPOINT_RX, |
| .configure = configure_hw_ep, |
| }, |
| { |
| .module = MODULE_HW_EP_TX, |
| .tag = DEVICE_HW_ENDPOINT_TX, |
| .configure = configure_hw_ep, |
| } |
| }; |
| |
| void get_stream_module_list_array(module_info_t **info, size_t *size) |
| { |
| *size = sizeof(stream_module_list); |
| *info = stream_module_list; |
| } |
| |
| void get_hw_ep_module_list_array(module_info_t **info, size_t *size) |
| { |
| *size = sizeof(hw_ep_module); |
| *info = hw_ep_module; |
| } |