| LOCAL_PATH:= $(call my-dir) |
| |
| # PLATFORM_SEPOLICY_VERSION is a number of the form "NN.m" with "NN" mapping to |
| # PLATFORM_SDK_VERSION and "m" as a minor number which allows for SELinux |
| # changes independent of PLATFORM_SDK_VERSION. This value will be set to |
| # 10000.0 to represent tip-of-tree development that is inherently unstable and |
| # thus designed not to work with any shipping vendor policy. This is similar in |
| # spirit to how DEFAULT_APP_TARGET_SDK is set. |
| # The minor version ('m' component) must be updated every time a platform release |
| # is made which breaks compatibility with the previous platform sepolicy version, |
| # not just on every increase in PLATFORM_SDK_VERSION. The minor version should |
| # be reset to 0 on every bump of the PLATFORM_SDK_VERSION. |
| sepolicy_major_vers := 25 |
| sepolicy_minor_vers := 0 |
| |
| ifneq ($(sepolicy_major_vers), $(PLATFORM_SDK_VERSION)) |
| $(error sepolicy_major_version does not match PLATFORM_SDK_VERSION, please update.) |
| endif |
| ifneq (REL,$(PLATFORM_VERSION_CODENAME)) |
| sepolicy_major_vers := 10000 |
| sepolicy_minor_vers := 0 |
| endif |
| PLATFORM_SEPOLICY_VERSION := $(join $(addsuffix .,$(sepolicy_major_vers)), $(sepolicy_minor_vers)) |
| sepolicy_major_vers := |
| sepolicy_minor_vers := |
| |
| include $(CLEAR_VARS) |
| # SELinux policy version. |
| # Must be <= /sys/fs/selinux/policyvers reported by the Android kernel. |
| # Must be within the compatibility range reported by checkpolicy -V. |
| POLICYVERS ?= 30 |
| |
| MLS_SENS=1 |
| MLS_CATS=1024 |
| |
| ifdef BOARD_SEPOLICY_REPLACE |
| $(error BOARD_SEPOLICY_REPLACE is no longer supported; please remove from your BoardConfig.mk or other .mk file.) |
| endif |
| |
| ifdef BOARD_SEPOLICY_IGNORE |
| $(error BOARD_SEPOLICY_IGNORE is no longer supported; please remove from your BoardConfig.mk or other .mk file.) |
| endif |
| |
| ifdef BOARD_SEPOLICY_UNION |
| $(warning BOARD_SEPOLICY_UNION is no longer required - all files found in BOARD_SEPOLICY_DIRS are implicitly unioned; please remove from your BoardConfig.mk or other .mk file.) |
| endif |
| |
| ifdef BOARD_SEPOLICY_M4DEFS |
| LOCAL_ADDITIONAL_M4DEFS := $(addprefix -D, $(BOARD_SEPOLICY_M4DEFS)) |
| endif |
| |
| # sepolicy is now divided into multiple portions: |
| # public - policy exported on which non-platform policy developers may write |
| # additional policy. types and attributes are versioned and included in |
| # delivered non-platform policy, which is to be combined with platform policy. |
| # private - platform-only policy required for platform functionality but which |
| # is not exported to vendor policy developers and as such may not be assumed |
| # to exist. |
| # vendor - vendor-only policy required for vendor functionality. This policy can |
| # reference the public policy but cannot reference the private policy. This |
| # policy is for components which are produced from the core/non-vendor tree and |
| # placed into a vendor partition. |
| # mapping - This contains policy statements which map the attributes |
| # exposed in the public policy of previous versions to the concrete types used |
| # in this policy to ensure that policy targeting attributes from public |
| # policy from an older platform version continues to work. |
| |
| # build process for device: |
| # 1) convert policies to CIL: |
| # - private + public platform policy to CIL |
| # - mapping file to CIL (should already be in CIL form) |
| # - non-platform public policy to CIL |
| # - non-platform public + private policy to CIL |
| # 2) attributize policy |
| # - run script which takes non-platform public and non-platform combined |
| # private + public policy and produces attributized and versioned |
| # non-platform policy |
| # 3) combine policy files |
| # - combine mapping, platform and non-platform policy. |
| # - compile output binary policy file |
| |
| PLAT_PUBLIC_POLICY := $(LOCAL_PATH)/public |
| PLAT_PRIVATE_POLICY := $(LOCAL_PATH)/private |
| PLAT_VENDOR_POLICY := $(LOCAL_PATH)/vendor |
| REQD_MASK_POLICY := $(LOCAL_PATH)/reqd_mask |
| |
| # TODO: move to README when doing the README update and finalizing versioning. |
| # BOARD_SEPOLICY_VERS must take the format "NN.m" and contain the sepolicy |
| # version identifier corresponding to the sepolicy on which the non-platform |
| # policy is to be based. If unspecified, this will build against the current |
| # public platform policy in tree |
| ifndef BOARD_SEPOLICY_VERS |
| $(warning BOARD_SEPOLICY_VERS not specified, assuming current platform version) |
| # The default platform policy version. |
| BOARD_SEPOLICY_VERS := $(PLATFORM_SEPOLICY_VERSION) |
| endif |
| |
| |
| platform_mapping_file := $(BOARD_SEPOLICY_VERS).cil |
| |
| ########################################################### |
| # Compute policy files to be used in policy build. |
| # $(1): files to include |
| # $(2): directories in which to find files |
| ########################################################### |
| |
| define build_policy |
| $(foreach type, $(1), $(foreach file, $(addsuffix /$(type), $(2)), $(sort $(wildcard $(file))))) |
| endef |
| |
| # Builds paths for all policy files found in BOARD_SEPOLICY_DIRS. |
| # $(1): the set of policy name paths to build |
| build_device_policy = $(call build_policy, $(1), $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS)) |
| |
| # Add a file containing only a newline in-between each policy configuration |
| # 'contexts' file. This will allow OEM policy configuration files without a |
| # final newline (0x0A) to be built correctly by the m4(1) macro processor. |
| # $(1): the set of contexts file names. |
| # $(2): the file containing only 0x0A. |
| add_nl = $(foreach entry, $(1), $(subst $(entry), $(entry) $(2), $(entry))) |
| |
| sepolicy_build_files := security_classes \ |
| initial_sids \ |
| access_vectors \ |
| global_macros \ |
| neverallow_macros \ |
| mls_macros \ |
| mls_decl \ |
| mls \ |
| policy_capabilities \ |
| te_macros \ |
| attributes \ |
| ioctl_defines \ |
| ioctl_macros \ |
| *.te \ |
| roles_decl \ |
| roles \ |
| users \ |
| initial_sid_contexts \ |
| fs_use \ |
| genfs_contexts \ |
| port_contexts |
| |
| # CIL files which contain workarounds for current limitation of human-readable |
| # module policy language. These files are appended to the CIL files produced |
| # from module language files. |
| sepolicy_build_cil_workaround_files := technical_debt.cil |
| |
| my_target_arch := $(TARGET_ARCH) |
| ifneq (,$(filter mips mips64,$(TARGET_ARCH))) |
| my_target_arch := mips |
| endif |
| |
| intermediates := $(TARGET_OUT_INTERMEDIATES)/ETC/sepolicy_intermediates |
| |
| with_asan := false |
| ifneq (,$(filter address,$(SANITIZE_TARGET))) |
| with_asan := true |
| endif |
| |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := selinux_policy |
| LOCAL_MODULE_TAGS := optional |
| # Include SELinux policy. We do this here because different modules |
| # need to be included based on the value of PRODUCT_FULL_TREBLE. This |
| # type of conditional inclusion cannot be done in top-level files such |
| # as build/target/product/embedded.mk. |
| # This conditional inclusion closely mimics the conditional logic |
| # inside init/init.cpp for loading SELinux policy from files. |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| |
| # Use split SELinux policy |
| LOCAL_REQUIRED_MODULES += \ |
| $(platform_mapping_file) \ |
| nonplat_sepolicy.cil \ |
| plat_sepolicy.cil \ |
| plat_and_mapping_sepolicy.cil.sha256 \ |
| secilc \ |
| nonplat_file_contexts \ |
| plat_file_contexts \ |
| plat_sepolicy_vers.txt |
| |
| # Include precompiled policy, unless told otherwise |
| ifneq ($(PRODUCT_PRECOMPILED_SEPOLICY),false) |
| LOCAL_REQUIRED_MODULES += precompiled_sepolicy precompiled_sepolicy.plat_and_mapping.sha256 |
| endif |
| |
| else |
| # Use monolithic SELinux policy |
| LOCAL_REQUIRED_MODULES += sepolicy \ |
| file_contexts.bin |
| endif |
| include $(BUILD_PHONY_PACKAGE) |
| |
| ################################## |
| # reqd_policy_mask - a policy.conf file which contains only the bare minimum |
| # policy necessary to use checkpolicy. This bare-minimum policy needs to be |
| # present in all policy.conf files, but should not necessarily be exported as |
| # part of the public policy. The rules generated by reqd_policy_mask will allow |
| # the compilation of public policy and subsequent removal of CIL policy that |
| # should not be exported. |
| |
| reqd_policy_mask.conf := $(intermediates)/reqd_policy_mask.conf |
| $(reqd_policy_mask.conf): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(reqd_policy_mask.conf): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(reqd_policy_mask.conf): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(reqd_policy_mask.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan) |
| $(reqd_policy_mask.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(reqd_policy_mask.conf): $(call build_policy, $(sepolicy_build_files), $(REQD_MASK_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \ |
| -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=$(TARGET_BUILD_VARIANT) \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \ |
| -D target_full_treble=$(PRODUCT_FULL_TREBLE) \ |
| -s $^ > $@ |
| |
| reqd_policy_mask.cil := $(intermediates)/reqd_policy_mask.cil |
| $(reqd_policy_mask.cil): $(reqd_policy_mask.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -C -M -c $(POLICYVERS) -o $@ $< |
| |
| reqd_policy_mask.conf := |
| |
| ################################## |
| # plat_pub_policy - policy that will be exported to be a part of non-platform |
| # policy corresponding to this platform version. This is a limited subset of |
| # policy that would not compile in checkpolicy on its own. To get around this |
| # limitation, add only the required files from private policy, which will |
| # generate CIL policy that will then be filtered out by the reqd_policy_mask. |
| plat_pub_policy.conf := $(intermediates)/plat_pub_policy.conf |
| $(plat_pub_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(plat_pub_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(plat_pub_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(plat_pub_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan) |
| $(plat_pub_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_pub_policy.conf): $(call build_policy, $(sepolicy_build_files), \ |
| $(PLAT_PUBLIC_POLICY) $(REQD_MASK_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \ |
| -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=$(TARGET_BUILD_VARIANT) \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \ |
| -D target_full_treble=$(PRODUCT_FULL_TREBLE) \ |
| -s $^ > $@ |
| |
| plat_pub_policy.cil := $(intermediates)/plat_pub_policy.cil |
| $(plat_pub_policy.cil): PRIVATE_POL_CONF := $(plat_pub_policy.conf) |
| $(plat_pub_policy.cil): PRIVATE_REQD_MASK := $(reqd_policy_mask.cil) |
| $(plat_pub_policy.cil): $(HOST_OUT_EXECUTABLES)/checkpolicy $(plat_pub_policy.conf) $(reqd_policy_mask.cil) |
| @mkdir -p $(dir $@) |
| $(hide) $< -C -M -c $(POLICYVERS) -o $@.tmp $(PRIVATE_POL_CONF) |
| $(hide) grep -Fxv -f $(PRIVATE_REQD_MASK) $@.tmp > $@ |
| |
| plat_pub_policy.conf := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := sectxfile_nl |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| |
| # Create a file containing newline only to add between context config files |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): |
| @mkdir -p $(dir $@) |
| $(hide) echo > $@ |
| |
| built_nl := $(LOCAL_BUILT_MODULE) |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_sepolicy.cil |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # plat_policy.conf - A combination of the private and public platform policy |
| # which will ship with the device. The platform will always reflect the most |
| # recent platform version and is not currently being attributized. |
| plat_policy.conf := $(intermediates)/plat_policy.conf |
| $(plat_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(plat_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(plat_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(plat_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan) |
| $(plat_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_policy.conf): $(call build_policy, $(sepolicy_build_files), \ |
| $(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \ |
| -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=$(TARGET_BUILD_VARIANT) \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \ |
| -D target_full_treble=$(PRODUCT_FULL_TREBLE) \ |
| -s $^ > $@ |
| $(hide) sed '/dontaudit/d' $@ > $@.dontaudit |
| |
| plat_policy_nvr := $(intermediates)/plat_policy_nvr.cil |
| $(plat_policy_nvr): PRIVATE_ADDITIONAL_CIL_FILES := \ |
| $(call build_policy, $(sepolicy_build_cil_workaround_files), $(PLAT_PRIVATE_POLICY)) |
| $(plat_policy_nvr): $(plat_policy.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy \ |
| $(call build_policy, $(sepolicy_build_cil_workaround_files), $(PLAT_PRIVATE_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -M -C -c $(POLICYVERS) -o $@ $< |
| $(hide) cat $(PRIVATE_ADDITIONAL_CIL_FILES) >> $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(plat_policy_nvr) |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(plat_policy_nvr) |
| @mkdir -p $(dir $@) |
| # Strip out neverallow statements. They aren't needed on-device and their presence |
| # significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on |
| # sailfish-eng). |
| grep -v '^(neverallow' $(PRIVATE_CIL_FILES) > $@ |
| # Confirm that the resulting policy compiles |
| $(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) $@ -o /dev/null -f /dev/null |
| |
| built_plat_cil := $(LOCAL_BUILT_MODULE) |
| plat_policy.conf := |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_sepolicy_vers.txt |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_PROPRIETARY_MODULE := true |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE) : PRIVATE_PLAT_SEPOL_VERS := $(BOARD_SEPOLICY_VERS) |
| $(LOCAL_BUILT_MODULE) : |
| mkdir -p $(dir $@) |
| echo $(PRIVATE_PLAT_SEPOL_VERS) > $@ |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := $(platform_mapping_file) |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux/mapping |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # auto-generate the mapping file for current platform policy, since it needs to |
| # track platform policy development |
| current_mapping.cil := $(intermediates)/mapping/$(PLATFORM_SEPOLICY_VERSION).cil |
| $(current_mapping.cil) : PRIVATE_VERS := $(PLATFORM_SEPOLICY_VERSION) |
| $(current_mapping.cil) : $(plat_pub_policy.cil) $(HOST_OUT_EXECUTABLES)/version_policy |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/version_policy -b $< -m -n $(PRIVATE_VERS) -o $@ |
| |
| |
| ifeq ($(BOARD_SEPOLICY_VERS), $(PLATFORM_SEPOLICY_VERSION)) |
| mapping_policy_nvr := $(current_mapping.cil) |
| else |
| mapping_policy_nvr := $(addsuffix /$(BOARD_SEPOLICY_VERS).cil, $(PLAT_PRIVATE_POLICY)/mapping) |
| endif |
| |
| $(LOCAL_BUILT_MODULE): $(mapping_policy_nvr) |
| # Strip out neverallow statements. They aren't needed on-device and their presence |
| # significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on |
| # sailfish-eng). |
| grep -v '^(neverallow' $< > $@ |
| |
| built_mapping_cil := $(LOCAL_BUILT_MODULE) |
| current_mapping.cil := |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_and_mapping_sepolicy.cil.sha256 |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH = $(TARGET_OUT)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): $(built_plat_cil) $(built_mapping_cil) |
| cat $^ | sha256sum | cut -d' ' -f1 > $@ |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := nonplat_sepolicy.cil |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_PROPRIETARY_MODULE := true |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # nonplat_policy.conf - A combination of the non-platform private, vendor and |
| # the exported platform policy associated with the version the non-platform |
| # policy targets. This needs attributization and to be combined with the |
| # platform-provided policy. Like plat_pub_policy.conf, this needs to make use |
| # of the reqd_policy_mask files from private policy in order to use checkpolicy. |
| nonplat_policy.conf := $(intermediates)/nonplat_policy.conf |
| $(nonplat_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(nonplat_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(nonplat_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(nonplat_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan) |
| $(nonplat_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(nonplat_policy.conf): $(call build_policy, $(sepolicy_build_files), \ |
| $(PLAT_PUBLIC_POLICY) $(REQD_MASK_POLICY) $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \ |
| -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=$(TARGET_BUILD_VARIANT) \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \ |
| -D target_full_treble=$(PRODUCT_FULL_TREBLE) \ |
| -s $^ > $@ |
| $(hide) sed '/dontaudit/d' $@ > $@.dontaudit |
| |
| nonplat_policy_raw := $(intermediates)/nonplat_policy_raw.cil |
| $(nonplat_policy_raw): PRIVATE_POL_CONF := $(nonplat_policy.conf) |
| $(nonplat_policy_raw): PRIVATE_REQD_MASK := $(reqd_policy_mask.cil) |
| $(nonplat_policy_raw): $(HOST_OUT_EXECUTABLES)/checkpolicy $(nonplat_policy.conf) \ |
| $(reqd_policy_mask.cil) |
| @mkdir -p $(dir $@) |
| $(hide) $< -C -M -c $(POLICYVERS) -o $@.tmp $(PRIVATE_POL_CONF) |
| $(hide) grep -Fxv -f $(PRIVATE_REQD_MASK) $@.tmp > $@ |
| |
| nonplat_policy_nvr := $(intermediates)/nonplat_policy_nvr.cil |
| $(nonplat_policy_nvr) : PRIVATE_VERS := $(BOARD_SEPOLICY_VERS) |
| $(nonplat_policy_nvr) : PRIVATE_TGT_POL := $(nonplat_policy_raw) |
| $(nonplat_policy_nvr) : $(plat_pub_policy.cil) $(nonplat_policy_raw) \ |
| $(HOST_OUT_EXECUTABLES)/version_policy |
| @mkdir -p $(dir $@) |
| $(HOST_OUT_EXECUTABLES)/version_policy -b $< -t $(PRIVATE_TGT_POL) -n $(PRIVATE_VERS) -o $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_NONPLAT_CIL_FILES := $(nonplat_policy_nvr) |
| $(LOCAL_BUILT_MODULE): PRIVATE_DEP_CIL_FILES := $(built_plat_cil) $(built_mapping_cil) |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(nonplat_policy_nvr) $(built_plat_cil) \ |
| $(built_mapping_cil) |
| @mkdir -p $(dir $@) |
| # Strip out neverallow statements. They aren't needed on-device and their presence |
| # significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on |
| # sailfish-eng). |
| grep -v '^(neverallow' $(PRIVATE_NONPLAT_CIL_FILES) > $@ |
| # Confirm that the resulting policy compiles combined with platform and mapping policies |
| $(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) \ |
| $(PRIVATE_DEP_CIL_FILES) $@ -o /dev/null -f /dev/null |
| |
| built_nonplat_cil := $(LOCAL_BUILT_MODULE) |
| nonplat_policy.conf := |
| nonplat_policy_raw := |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := precompiled_sepolicy |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_PROPRIETARY_MODULE := true |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := \ |
| $(built_plat_cil) $(built_mapping_cil) $(built_nonplat_cil) |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc \ |
| $(built_plat_cil) $(built_mapping_cil) $(built_nonplat_cil) |
| $(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) \ |
| $(PRIVATE_CIL_FILES) -o $@ -f /dev/null |
| |
| built_precompiled_sepolicy := $(LOCAL_BUILT_MODULE) |
| |
| ################################# |
| # SHA-256 digest of the plat_sepolicy.cil and mapping_sepolicy.cil files against |
| # which precompiled_policy was built. |
| ################################# |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := precompiled_sepolicy.plat_and_mapping.sha256 |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_PROPRIETARY_MODULE := true |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(built_plat_cil) $(built_mapping_cil) |
| $(LOCAL_BUILT_MODULE): $(built_precompiled_sepolicy) $(built_plat_cil) $(built_mapping_cil) |
| cat $(PRIVATE_CIL_FILES) | sha256sum | cut -d' ' -f1 > $@ |
| |
| ################################# |
| include $(CLEAR_VARS) |
| # build this target so that we can still perform neverallow checks |
| |
| LOCAL_MODULE := sepolicy |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| all_cil_files := \ |
| $(plat_policy_nvr) \ |
| $(mapping_policy_nvr) \ |
| $(nonplat_policy_nvr) \ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(all_cil_files) |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $(all_cil_files) |
| @mkdir -p $(dir $@) |
| $(hide) $< -M true -G -c $(POLICYVERS) $(PRIVATE_CIL_FILES) -o $@.tmp -f /dev/null |
| $(hide) $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $@.tmp permissive > $@.permissivedomains |
| $(hide) if [ "$(TARGET_BUILD_VARIANT)" = "user" -a -s $@.permissivedomains ]; then \ |
| echo "==========" 1>&2; \ |
| echo "ERROR: permissive domains not allowed in user builds" 1>&2; \ |
| echo "List of invalid domains:" 1>&2; \ |
| cat $@.permissivedomains 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) mv $@.tmp $@ |
| |
| built_sepolicy := $(LOCAL_BUILT_MODULE) |
| all_cil_files := |
| |
| ################################# |
| include $(CLEAR_VARS) |
| |
| # keep concrete sepolicy for neverallow checks |
| |
| LOCAL_MODULE := sepolicy.recovery |
| LOCAL_MODULE_STEM := sepolicy |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| sepolicy.recovery.conf := $(intermediates)/sepolicy.recovery.conf |
| $(sepolicy.recovery.conf): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(sepolicy.recovery.conf): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(sepolicy.recovery.conf): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(sepolicy.recovery.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan) |
| $(sepolicy.recovery.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(sepolicy.recovery.conf): $(call build_policy, $(sepolicy_build_files), \ |
| $(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY) \ |
| $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \ |
| -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=$(TARGET_BUILD_VARIANT) \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \ |
| -D target_recovery=true \ |
| -s $^ > $@ |
| $(hide) sed '/dontaudit/d' $@ > $@.dontaudit |
| |
| $(LOCAL_BUILT_MODULE): $(sepolicy.recovery.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy \ |
| $(HOST_OUT_EXECUTABLES)/sepolicy-analyze |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -M -c $(POLICYVERS) -o $@.tmp $< |
| $(hide) $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $@.tmp permissive > $@.permissivedomains |
| $(hide) if [ "$(TARGET_BUILD_VARIANT)" = "user" -a -s $@.permissivedomains ]; then \ |
| echo "==========" 1>&2; \ |
| echo "ERROR: permissive domains not allowed in user builds" 1>&2; \ |
| echo "List of invalid domains:" 1>&2; \ |
| cat $@.permissivedomains 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) mv $@.tmp $@ |
| |
| sepolicy.recovery.conf := |
| |
| ################################## |
| # SELinux policy embedded into CTS. |
| # CTS checks neverallow rules of this policy against the policy of the device under test. |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := general_sepolicy.conf |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := tests |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_MLS_SENS := $(MLS_SENS) |
| $(LOCAL_BUILT_MODULE): PRIVATE_MLS_CATS := $(MLS_CATS) |
| $(LOCAL_BUILT_MODULE): PRIVATE_TGT_ARCH := $(my_target_arch) |
| $(LOCAL_BUILT_MODULE): $(call build_policy, $(sepolicy_build_files), \ |
| $(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY)) |
| mkdir -p $(dir $@) |
| $(hide) m4 -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \ |
| -D target_build_variant=user \ |
| -D target_with_dexpreopt=$(WITH_DEXPREOPT) \ |
| -D target_arch=$(PRIVATE_TGT_ARCH) \ |
| -D target_with_asan=false \ |
| -D target_full_treble=cts \ |
| -s $^ > $@ |
| $(hide) sed '/dontaudit/d' $@ > $@.dontaudit |
| |
| ################################## |
| # TODO - remove this. Keep around until we get the filesystem creation stuff taken care of. |
| # |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := file_contexts.bin |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # The file_contexts.bin is built in the following way: |
| # 1. Collect all file_contexts files in THIS repository and process them with |
| # m4 into a tmp file called file_contexts.local.tmp. |
| # 2. Collect all device specific file_contexts files and process them with m4 |
| # into a tmp file called file_contexts.device.tmp. |
| # 3. Run checkfc -e (allow no device fc entries ie empty) and fc_sort on |
| # file_contexts.device.tmp and output to file_contexts.device.sorted.tmp. |
| # 4. Concatenate file_contexts.local.tmp and file_contexts.device.tmp into |
| # file_contexts.concat.tmp. |
| # 5. Run checkfc and sefcontext_compile on file_contexts.concat.tmp to produce |
| # file_contexts.bin. |
| # |
| # Note: That a newline file is placed between each file_context file found to |
| # ensure a proper build when an fc file is missing an ending newline. |
| |
| local_fc_files := $(PLAT_PRIVATE_POLICY)/file_contexts |
| ifneq ($(filter address,$(SANITIZE_TARGET)),) |
| local_fc_files := $(local_fc_files) $(PLAT_PRIVATE_POLICY)/file_contexts_asan |
| endif |
| local_fcfiles_with_nl := $(call add_nl, $(local_fc_files), $(built_nl)) |
| |
| file_contexts.local.tmp := $(intermediates)/file_contexts.local.tmp |
| $(file_contexts.local.tmp): $(local_fcfiles_with_nl) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $^ > $@ |
| |
| device_fc_files := $(call build_device_policy, file_contexts) |
| device_fcfiles_with_nl := $(call add_nl, $(device_fc_files), $(built_nl)) |
| |
| file_contexts.device.tmp := $(intermediates)/file_contexts.device.tmp |
| $(file_contexts.device.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(file_contexts.device.tmp): $(device_fcfiles_with_nl) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@ |
| |
| file_contexts.device.sorted.tmp := $(intermediates)/file_contexts.device.sorted.tmp |
| $(file_contexts.device.sorted.tmp): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(file_contexts.device.sorted.tmp): $(file_contexts.device.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/fc_sort $(HOST_OUT_EXECUTABLES)/checkfc |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e $(PRIVATE_SEPOLICY) $< |
| $(hide) $(HOST_OUT_EXECUTABLES)/fc_sort $< $@ |
| |
| file_contexts.concat.tmp := $(intermediates)/file_contexts.concat.tmp |
| $(file_contexts.concat.tmp): $(file_contexts.local.tmp) $(file_contexts.device.sorted.tmp) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $^ > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(file_contexts.concat.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/sefcontext_compile $(HOST_OUT_EXECUTABLES)/checkfc |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc $(PRIVATE_SEPOLICY) $< |
| $(hide) $(HOST_OUT_EXECUTABLES)/sefcontext_compile -o $@ $< |
| |
| built_fc := $(LOCAL_BUILT_MODULE) |
| local_fc_files := |
| local_fcfiles_with_nl := |
| device_fc_files := |
| device_fcfiles_with_nl := |
| file_contexts.concat.tmp := |
| file_contexts.device.sorted.tmp := |
| file_contexts.device.tmp := |
| file_contexts.local.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := file_contexts.bin.recovery |
| LOCAL_MODULE_STEM := file_contexts.bin |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): $(built_fc) |
| $(hide) cp -f $< $@ |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_file_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| local_fc_files := $(PLAT_PRIVATE_POLICY)/file_contexts |
| ifneq ($(filter address,$(SANITIZE_TARGET)),) |
| local_fc_files += $(PLAT_PRIVATE_POLICY)/file_contexts_asan |
| endif |
| local_fcfiles_with_nl := $(call add_nl, $(local_fc_files), $(built_nl)) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_FC_FILES := $(local_fcfiles_with_nl) |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): PRIVATE_FC_SORT := $(HOST_OUT_EXECUTABLES)/fc_sort |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/checkfc $(HOST_OUT_EXECUTABLES)/fc_sort \ |
| $(local_fcfiles_with_nl) $(built_sepolicy) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_FC_FILES) > $@.tmp |
| $(hide) $< $(PRIVATE_SEPOLICY) $@.tmp |
| $(hide) $(PRIVATE_FC_SORT) $@.tmp $@ |
| |
| built_plat_fc := $(LOCAL_BUILT_MODULE) |
| local_fc_files := |
| local_fcfiles_with_nl := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := nonplat_file_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| nonplat_fc_files := $(call build_device_policy, file_contexts) |
| nonplat_fcfiles_with_nl := $(call add_nl, $(nonplat_fc_files), $(built_nl)) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_FC_FILES := $(nonplat_fcfiles_with_nl) |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): PRIVATE_FC_SORT := $(HOST_OUT_EXECUTABLES)/fc_sort |
| $(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/checkfc $(HOST_OUT_EXECUTABLES)/fc_sort \ |
| $(nonplat_fcfiles_with_nl) $(built_sepolicy) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_FC_FILES) > $@.tmp |
| $(hide) $< $(PRIVATE_SEPOLICY) $@.tmp |
| $(hide) $(PRIVATE_FC_SORT) $@.tmp $@ |
| |
| built_nonplat_fc := $(LOCAL_BUILT_MODULE) |
| nonplat_fc_files := |
| nonplat_fcfiles_with_nl := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := plat_seapp_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| plat_sc_files := $(call build_policy, seapp_contexts, $(PLAT_PRIVATE_POLICY)) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): PRIVATE_SC_FILES := $(plat_sc_files) |
| $(LOCAL_BUILT_MODULE): $(built_sepolicy) $(plat_sc_files) $(HOST_OUT_EXECUTABLES)/checkseapp |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkseapp -p $(PRIVATE_SEPOLICY) -o $@ $(PRIVATE_SC_FILES) |
| |
| built_plat_sc := $(LOCAL_BUILT_MODULE) |
| plat_sc_files := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := nonplat_seapp_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| nonplat_sc_files := $(call build_policy, seapp_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| plat_sc_neverallow_files := $(addprefix $(PLAT_PRIVATE_POLICY)/, seapp_contexts) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): PRIVATE_SC_FILES := $(nonplat_sc_files) |
| $(LOCAL_BUILT_MODULE): PRIVATE_SC_NEVERALLOW_FILES := $(plat_sc_neverallow_files) |
| $(LOCAL_BUILT_MODULE): $(built_sepolicy) $(nonplat_sc_files) $(HOST_OUT_EXECUTABLES)/checkseapp $(plat_sc_neverallow_files) |
| @mkdir -p $(dir $@) |
| $(hide) grep -ie '^neverallow' $(PRIVATE_SC_NEVERALLOW_FILES) > $@.tmp |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkseapp -p $(PRIVATE_SEPOLICY) -o $@ $(PRIVATE_SC_FILES) $@.tmp |
| |
| built_nonplat_sc := $(LOCAL_BUILT_MODULE) |
| nonplat_sc_files := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := plat_seapp_neverallows |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := tests |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): $(plat_sc_neverallow_files) |
| @mkdir -p $(dir $@) |
| - $(hide) grep -ie '^neverallow' $< > $@ |
| |
| plat_sc_neverallow_files := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_property_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| plat_pcfiles := $(call build_policy, property_contexts, $(PLAT_PRIVATE_POLICY)) |
| |
| plat_property_contexts.tmp := $(intermediates)/plat_property_contexts.tmp |
| $(plat_property_contexts.tmp): PRIVATE_PC_FILES := $(plat_pcfiles) |
| $(plat_property_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_property_contexts.tmp): $(plat_pcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_PC_FILES) > $@ |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(plat_property_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc |
| @mkdir -p $(dir $@) |
| $(hide) sed -e 's/#.*$$//' -e '/^$$/d' $< | sort -u -o $@ |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -p $(PRIVATE_SEPOLICY) $@ |
| |
| built_plat_pc := $(LOCAL_BUILT_MODULE) |
| plat_pcfiles := |
| plat_property_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := nonplat_property_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| nonplat_pcfiles := $(call build_policy, property_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| |
| nonplat_property_contexts.tmp := $(intermediates)/nonplat_property_contexts.tmp |
| $(nonplat_property_contexts.tmp): PRIVATE_PC_FILES := $(nonplat_pcfiles) |
| $(nonplat_property_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(nonplat_property_contexts.tmp): $(nonplat_pcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_PC_FILES) > $@ |
| |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(nonplat_property_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc |
| @mkdir -p $(dir $@) |
| $(hide) sed -e 's/#.*$$//' -e '/^$$/d' $< | sort -u -o $@ |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -p $(PRIVATE_SEPOLICY) $@ |
| |
| built_nonplat_pc := $(LOCAL_BUILT_MODULE) |
| nonplat_pcfiles := |
| nonplat_property_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_property_contexts.recovery |
| LOCAL_MODULE_STEM := plat_property_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): $(built_plat_pc) |
| $(hide) cp -f $< $@ |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := nonplat_property_contexts.recovery |
| LOCAL_MODULE_STEM := nonplat_property_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT) |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): $(built_nonplat_pc) |
| $(hide) cp -f $< $@ |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_service_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| plat_svcfiles := $(call build_policy, service_contexts, $(PLAT_PRIVATE_POLICY)) |
| |
| plat_service_contexts.tmp := $(intermediates)/plat_service_contexts.tmp |
| $(plat_service_contexts.tmp): PRIVATE_SVC_FILES := $(plat_svcfiles) |
| $(plat_service_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_service_contexts.tmp): $(plat_svcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(plat_service_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP) |
| @mkdir -p $(dir $@) |
| sed -e 's/#.*$$//' -e '/^$$/d' $< > $@ |
| $(HOST_OUT_EXECUTABLES)/checkfc -s $(PRIVATE_SEPOLICY) $@ |
| |
| built_plat_svc := $(LOCAL_BUILT_MODULE) |
| plat_svcfiles := |
| plat_service_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := nonplat_service_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| nonplat_svcfiles := $(call build_policy, service_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| |
| nonplat_service_contexts.tmp := $(intermediates)/nonplat_service_contexts.tmp |
| $(nonplat_service_contexts.tmp): PRIVATE_SVC_FILES := $(nonplat_svcfiles) |
| $(nonplat_service_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(nonplat_service_contexts.tmp): $(nonplat_svcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(nonplat_service_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP) |
| @mkdir -p $(dir $@) |
| sed -e 's/#.*$$//' -e '/^$$/d' $< > $@ |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -s $(PRIVATE_SEPOLICY) $@ |
| |
| built_nonplat_svc := $(LOCAL_BUILT_MODULE) |
| nonplat_svcfiles := |
| nonplat_service_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_hwservice_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| plat_hwsvcfiles := $(call build_policy, hwservice_contexts, $(PLAT_PRIVATE_POLICY)) |
| |
| plat_hwservice_contexts.tmp := $(intermediates)/plat_hwservice_contexts.tmp |
| $(plat_hwservice_contexts.tmp): PRIVATE_SVC_FILES := $(plat_hwsvcfiles) |
| $(plat_hwservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_hwservice_contexts.tmp): $(plat_hwsvcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(plat_hwservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP) |
| @mkdir -p $(dir $@) |
| sed -e 's/#.*$$//' -e '/^$$/d' $< > $@ |
| $(HOST_OUT_EXECUTABLES)/checkfc -e -l $(PRIVATE_SEPOLICY) $@ |
| |
| plat_hwsvcfiles := |
| plat_hwservice_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := nonplat_hwservice_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| nonplat_hwsvcfiles := $(call build_policy, hwservice_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| |
| nonplat_hwservice_contexts.tmp := $(intermediates)/nonplat_hwservice_contexts.tmp |
| $(nonplat_hwservice_contexts.tmp): PRIVATE_SVC_FILES := $(nonplat_hwsvcfiles) |
| $(nonplat_hwservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(nonplat_hwservice_contexts.tmp): $(nonplat_hwsvcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(nonplat_hwservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP) |
| @mkdir -p $(dir $@) |
| sed -e 's/#.*$$//' -e '/^$$/d' $< > $@ |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e -l $(PRIVATE_SEPOLICY) $@ |
| |
| nonplat_hwsvcfiles := |
| nonplat_hwservice_contexts.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := vndservice_contexts |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| else |
| LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT) |
| endif |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| vnd_svcfiles := $(call build_policy, vndservice_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| |
| vndservice_contexts.tmp := $(intermediates)/vndservice_contexts.tmp |
| $(vndservice_contexts.tmp): PRIVATE_SVC_FILES := $(vnd_svcfiles) |
| $(vndservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(vndservice_contexts.tmp): $(vnd_svcfiles) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@ |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy) |
| $(LOCAL_BUILT_MODULE): $(vndservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP) |
| @mkdir -p $(dir $@) |
| sed -e 's/#.*$$//' -e '/^$$/d' $< > $@ |
| $(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e -v $(PRIVATE_SEPOLICY) $@ |
| |
| vnd_svcfiles := |
| vndservice_contexts.tmp := |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := plat_mac_permissions.xml |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # Build keys.conf |
| plat_mac_perms_keys.tmp := $(intermediates)/plat_keys.tmp |
| $(plat_mac_perms_keys.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(plat_mac_perms_keys.tmp): $(call build_policy, keys.conf, $(PLAT_PRIVATE_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@ |
| |
| all_plat_mac_perms_files := $(call build_policy, mac_permissions.xml, $(PLAT_PRIVATE_POLICY)) |
| |
| # Should be synced with keys.conf. |
| all_plat_keys := platform media shared testkey |
| all_plat_keys := $(all_keys:%=$(dir $(DEFAULT_SYSTEM_DEV_CERTIFICATE))/%.x509.pem) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_MAC_PERMS_FILES := $(all_plat_mac_perms_files) |
| $(LOCAL_BUILT_MODULE): $(plat_mac_perms_keys.tmp) $(HOST_OUT_EXECUTABLES)/insertkeys.py \ |
| $(all_plat_mac_perms_files) $(all_plat_keys) |
| @mkdir -p $(dir $@) |
| $(hide) DEFAULT_SYSTEM_DEV_CERTIFICATE="$(dir $(DEFAULT_SYSTEM_DEV_CERTIFICATE))" \ |
| $(HOST_OUT_EXECUTABLES)/insertkeys.py -t $(TARGET_BUILD_VARIANT) -c $(TOP) $< -o $@ $(PRIVATE_MAC_PERMS_FILES) |
| |
| all_mac_perms_files := |
| all_plat_keys := |
| plat_mac_perms_keys.tmp := |
| |
| ################################## |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := nonplat_mac_permissions.xml |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_MODULE_TAGS := optional |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| # Build keys.conf |
| nonplat_mac_perms_keys.tmp := $(intermediates)/nonplat_keys.tmp |
| $(nonplat_mac_perms_keys.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS) |
| $(nonplat_mac_perms_keys.tmp): $(call build_policy, keys.conf, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| @mkdir -p $(dir $@) |
| $(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@ |
| |
| all_nonplat_mac_perms_files := $(call build_policy, mac_permissions.xml, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY)) |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_MAC_PERMS_FILES := $(all_nonplat_mac_perms_files) |
| $(LOCAL_BUILT_MODULE): $(nonplat_mac_perms_keys.tmp) $(HOST_OUT_EXECUTABLES)/insertkeys.py \ |
| $(all_nonplat_mac_perms_files) |
| @mkdir -p $(dir $@) |
| $(hide) $(HOST_OUT_EXECUTABLES)/insertkeys.py -t $(TARGET_BUILD_VARIANT) -c $(TOP) $< -o $@ $(PRIVATE_MAC_PERMS_FILES) |
| |
| nonplat_mac_perms_keys.tmp := |
| all_nonplat_mac_perms_files := |
| |
| ################################## |
| |
| add_nl := |
| build_device_policy := |
| build_policy := |
| built_plat_fc := |
| built_nonplat_fc := |
| built_nl := |
| built_plat_cil := |
| built_mapping_cil := |
| built_plat_pc := |
| built_nonplat_cil := |
| built_nonplat_pc := |
| built_nonplat_sc := |
| built_plat_sc := |
| built_precompiled_sepolicy := |
| built_sepolicy := |
| built_plat_svc := |
| built_nonplat_svc := |
| mapping_policy_nvr := |
| my_target_arch := |
| nonplat_policy_nvr := |
| plat_policy_nvr := |
| plat_pub_policy.cil := |
| reqd_policy_mask.cil := |
| sepolicy_build_files := |
| sepolicy_build_cil_workaround_files := |
| with_asan := |
| |
| include $(call all-makefiles-under,$(LOCAL_PATH)) |