| /* |
| * Copyright 2020 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include <functional> |
| #include <iostream> |
| #include <memory> |
| |
| #include "FuzzFormatTypes.h" |
| #include "fuzzer/FuzzedDataProvider.h" |
| #include "utils/String8.h" |
| |
| static constexpr int MAX_STRING_BYTES = 256; |
| static constexpr uint8_t MAX_OPERATIONS = 50; |
| // Interestingly, 2147483614 (INT32_MAX - 33) seems to be the max value that is handled for format |
| // flags. Unfortunately we need to use a smaller value so we avoid consuming too much memory. |
| |
| void fuzzFormat(FuzzedDataProvider* dataProvider, android::String8* str1, bool shouldAppend); |
| std::vector<std::function<void(FuzzedDataProvider*, android::String8*, android::String8*)>> |
| operations = { |
| // Bytes and size |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->bytes(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->isEmpty(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->length(); |
| }, |
| |
| // Casing |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->toLower(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8* str2) -> void { |
| str1->removeAll(str2->c_str()); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8* str2) -> void { |
| const android::String8& constRef(*str2); |
| str1->compare(constRef); |
| }, |
| |
| // Append and format |
| [](FuzzedDataProvider*, android::String8* str1, android::String8* str2) -> void { |
| str1->append(str2->c_str()); |
| }, |
| [](FuzzedDataProvider* dataProvider, android::String8* str1, android::String8*) |
| -> void { fuzzFormat(dataProvider, str1, dataProvider->ConsumeBool()); }, |
| |
| // Find operation |
| [](FuzzedDataProvider* dataProvider, android::String8* str1, |
| android::String8* str2) -> void { |
| // We need to get a value from our fuzzer here. |
| int start_index = dataProvider->ConsumeIntegralInRange<int>(0, str1->size()); |
| str1->find(str2->c_str(), start_index); |
| }, |
| |
| // Path handling |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->getBasePath(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->getPathExtension(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->getPathLeaf(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->getPathDir(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| str1->convertToResPath(); |
| }, |
| [](FuzzedDataProvider*, android::String8* str1, android::String8*) -> void { |
| std::shared_ptr<android::String8> path_out_str = |
| std::make_shared<android::String8>(); |
| str1->walkPath(path_out_str.get()); |
| path_out_str->clear(); |
| }, |
| [](FuzzedDataProvider* dataProvider, android::String8* str1, |
| android::String8*) -> void { |
| str1->appendPath(dataProvider->ConsumeBytesWithTerminator<char>(5).data()); |
| }, |
| }; |
| |
| void fuzzFormat(FuzzedDataProvider* dataProvider, android::String8* str1, bool shouldAppend) { |
| FormatChar formatType = dataProvider->ConsumeEnum<FormatChar>(); |
| |
| std::string formatString("%"); |
| // Width specifier |
| if (dataProvider->ConsumeBool()) { |
| // Left pad with zeroes |
| if (dataProvider->ConsumeBool()) { |
| formatString.push_back('0'); |
| } |
| // Right justify (or left justify if negative) |
| int32_t justify = dataProvider->ConsumeIntegralInRange<int32_t>(-kMaxFormatFlagValue, |
| kMaxFormatFlagValue); |
| formatString += std::to_string(justify); |
| } |
| |
| // The # specifier only works with o, x, X, a, A, e, E, f, F, g, and G |
| if (canApplyFlag(formatType, '#') && dataProvider->ConsumeBool()) { |
| formatString.push_back('#'); |
| } |
| |
| // Precision specifier |
| if (canApplyFlag(formatType, '.') && dataProvider->ConsumeBool()) { |
| formatString.push_back('.'); |
| formatString += |
| std::to_string(dataProvider->ConsumeIntegralInRange<int>(0, kMaxFormatFlagValue)); |
| } |
| |
| formatString.push_back(kFormatChars.at(static_cast<uint8_t>(formatType))); |
| |
| switch (formatType) { |
| case SIGNED_DECIMAL: { |
| int val = dataProvider->ConsumeIntegral<int>(); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val); |
| } else { |
| str1->format(formatString.c_str(), dataProvider->ConsumeIntegral<int>()); |
| } |
| break; |
| } |
| |
| case UNSIGNED_DECIMAL: |
| case UNSIGNED_OCTAL: |
| case UNSIGNED_HEX_LOWER: |
| case UNSIGNED_HEX_UPPER: { |
| // Unsigned integers for u, o, x, and X |
| uint val = dataProvider->ConsumeIntegral<uint>(); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val); |
| } else { |
| str1->format(formatString.c_str(), val); |
| } |
| break; |
| } |
| |
| case FLOAT_LOWER: |
| case FLOAT_UPPER: |
| case EXPONENT_LOWER: |
| case EXPONENT_UPPER: |
| case SHORT_EXP_LOWER: |
| case SHORT_EXP_UPPER: |
| case HEX_FLOAT_LOWER: |
| case HEX_FLOAT_UPPER: { |
| // Floating points for f, F, e, E, g, G, a, and A |
| float val = dataProvider->ConsumeFloatingPoint<float>(); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val); |
| } else { |
| str1->format(formatString.c_str(), val); |
| } |
| break; |
| } |
| |
| case CHAR: { |
| char val = dataProvider->ConsumeIntegral<char>(); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val); |
| } else { |
| str1->format(formatString.c_str(), val); |
| } |
| break; |
| } |
| |
| case STRING: { |
| std::string val = dataProvider->ConsumeRandomLengthString(MAX_STRING_BYTES); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val.c_str()); |
| } else { |
| str1->format(formatString.c_str(), val.c_str()); |
| } |
| break; |
| } |
| case POINTER: { |
| uintptr_t val = dataProvider->ConsumeIntegral<uintptr_t>(); |
| if (shouldAppend) { |
| str1->appendFormat(formatString.c_str(), val); |
| } else { |
| str1->format(formatString.c_str(), val); |
| } |
| break; |
| } |
| } |
| } |
| |
| void callFunc(uint8_t index, FuzzedDataProvider* dataProvider, android::String8* str1, |
| android::String8* str2) { |
| operations[index](dataProvider, str1, str2); |
| } |
| |
| extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) { |
| FuzzedDataProvider dataProvider(data, size); |
| // Generate vector lengths |
| const size_t kVecOneLen = dataProvider.ConsumeIntegralInRange<size_t>(1, MAX_STRING_BYTES); |
| const size_t kVecTwoLen = dataProvider.ConsumeIntegralInRange<size_t>(1, MAX_STRING_BYTES); |
| // Populate vectors |
| std::vector<char> vec = dataProvider.ConsumeBytesWithTerminator<char>(kVecOneLen); |
| std::vector<char> vec_two = dataProvider.ConsumeBytesWithTerminator<char>(kVecTwoLen); |
| // Create UTF-8 pointers |
| android::String8 str_one_utf8 = android::String8(vec.data()); |
| android::String8 str_two_utf8 = android::String8(vec_two.data()); |
| // Run operations against strings |
| int opsRun = 0; |
| while (dataProvider.remaining_bytes() > 0 && opsRun++ < MAX_OPERATIONS) { |
| uint8_t op = dataProvider.ConsumeIntegralInRange<uint8_t>(0, operations.size() - 1); |
| operations[op](&dataProvider, &str_one_utf8, &str_two_utf8); |
| } |
| // Just to be extra sure these can be freed, we're going to explicitly clear |
| // them |
| str_one_utf8.clear(); |
| str_two_utf8.clear(); |
| return 0; |
| } |