| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "usb.h" |
| |
| #include <dirent.h> |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/functionfs.h> |
| |
| #include <algorithm> |
| #include <atomic> |
| #include <chrono> |
| #include <condition_variable> |
| #include <mutex> |
| #include <thread> |
| |
| #include <android-base/logging.h> |
| #include <android-base/properties.h> |
| |
| using namespace std::chrono_literals; |
| |
| #define D(...) |
| #define MAX_PACKET_SIZE_FS 64 |
| #define MAX_PACKET_SIZE_HS 512 |
| #define MAX_PACKET_SIZE_SS 1024 |
| |
| #define USB_FFS_BULK_SIZE 16384 |
| |
| // Number of buffers needed to fit MAX_PAYLOAD, with an extra for ZLPs. |
| #define USB_FFS_NUM_BUFS ((4 * MAX_PAYLOAD / USB_FFS_BULK_SIZE) + 1) |
| |
| static void aio_block_init(aio_block* aiob, unsigned num_bufs) { |
| aiob->iocb.resize(num_bufs); |
| aiob->iocbs.resize(num_bufs); |
| aiob->events.resize(num_bufs); |
| aiob->num_submitted = 0; |
| for (unsigned i = 0; i < num_bufs; i++) { |
| aiob->iocbs[i] = &aiob->iocb[i]; |
| } |
| memset(&aiob->ctx, 0, sizeof(aiob->ctx)); |
| if (io_setup(num_bufs, &aiob->ctx)) { |
| D("[ aio: got error on io_setup (%d) ]", errno); |
| } |
| } |
| |
| static int getMaxPacketSize(int ffs_fd) { |
| usb_endpoint_descriptor desc; |
| if (ioctl(ffs_fd, FUNCTIONFS_ENDPOINT_DESC, reinterpret_cast<unsigned long>(&desc))) { |
| D("[ could not get endpoint descriptor! (%d) ]", errno); |
| return MAX_PACKET_SIZE_HS; |
| } else { |
| return desc.wMaxPacketSize; |
| } |
| } |
| |
| static int usb_ffs_write(usb_handle* h, const void* data, int len) { |
| D("about to write (fd=%d, len=%d)", h->bulk_in.get(), len); |
| |
| const char* buf = static_cast<const char*>(data); |
| int orig_len = len; |
| while (len > 0) { |
| int write_len = std::min(USB_FFS_BULK_SIZE, len); |
| int n = write(h->bulk_in.get(), buf, write_len); |
| if (n < 0) { |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_in.get(), n, strerror(errno)); |
| return -1; |
| } |
| buf += n; |
| len -= n; |
| } |
| |
| D("[ done fd=%d ]", h->bulk_in.get()); |
| return orig_len; |
| } |
| |
| static int usb_ffs_read(usb_handle* h, void* data, int len, bool allow_partial) { |
| D("about to read (fd=%d, len=%d)", h->bulk_out.get(), len); |
| |
| char* buf = static_cast<char*>(data); |
| int orig_len = len; |
| unsigned count = 0; |
| while (len > 0) { |
| int read_len = std::min(USB_FFS_BULK_SIZE, len); |
| int n = read(h->bulk_out.get(), buf, read_len); |
| if (n < 0) { |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_out.get(), n, strerror(errno)); |
| return -1; |
| } |
| buf += n; |
| len -= n; |
| count += n; |
| |
| // For fastbootd command such as "getvar all", len parameter is always set 64. |
| // But what we read is actually less than 64. |
| // For example, length 10 for "getvar all" command. |
| // If we get less data than expected, this means there should be no more data. |
| if (allow_partial && n < read_len) { |
| orig_len = count; |
| break; |
| } |
| } |
| |
| D("[ done fd=%d ]", h->bulk_out.get()); |
| return orig_len; |
| } |
| |
| static int usb_ffs_do_aio(usb_handle* h, const void* data, int len, bool read) { |
| aio_block* aiob = read ? &h->read_aiob : &h->write_aiob; |
| bool zero_packet = false; |
| |
| int num_bufs = len / h->io_size + (len % h->io_size == 0 ? 0 : 1); |
| const char* cur_data = reinterpret_cast<const char*>(data); |
| int packet_size = getMaxPacketSize(aiob->fd); |
| |
| if (posix_madvise(const_cast<void*>(data), len, POSIX_MADV_SEQUENTIAL | POSIX_MADV_WILLNEED) < |
| 0) { |
| D("[ Failed to madvise: %d ]", errno); |
| } |
| |
| for (int i = 0; i < num_bufs; i++) { |
| int buf_len = std::min(len, static_cast<int>(h->io_size)); |
| io_prep(&aiob->iocb[i], aiob->fd, cur_data, buf_len, 0, read); |
| |
| len -= buf_len; |
| cur_data += buf_len; |
| |
| if (len == 0 && buf_len % packet_size == 0 && read) { |
| // adb does not expect the device to send a zero packet after data transfer, |
| // but the host *does* send a zero packet for the device to read. |
| zero_packet = h->reads_zero_packets; |
| } |
| } |
| if (zero_packet) { |
| io_prep(&aiob->iocb[num_bufs], aiob->fd, reinterpret_cast<const void*>(cur_data), |
| packet_size, 0, read); |
| num_bufs += 1; |
| } |
| |
| while (true) { |
| if (TEMP_FAILURE_RETRY(io_submit(aiob->ctx, num_bufs, aiob->iocbs.data())) < num_bufs) { |
| PLOG(ERROR) << "aio: got error submitting " << (read ? "read" : "write"); |
| return -1; |
| } |
| if (TEMP_FAILURE_RETRY(io_getevents(aiob->ctx, num_bufs, num_bufs, aiob->events.data(), |
| nullptr)) < num_bufs) { |
| PLOG(ERROR) << "aio: got error waiting " << (read ? "read" : "write"); |
| return -1; |
| } |
| if (num_bufs == 1 && aiob->events[0].res == -EINTR) { |
| continue; |
| } |
| int ret = 0; |
| for (int i = 0; i < num_bufs; i++) { |
| if (aiob->events[i].res < 0) { |
| errno = -aiob->events[i].res; |
| PLOG(ERROR) << "aio: got error event on " << (read ? "read" : "write") |
| << " total bufs " << num_bufs; |
| return -1; |
| } |
| ret += aiob->events[i].res; |
| } |
| return ret; |
| } |
| } |
| |
| static int usb_ffs_aio_read(usb_handle* h, void* data, int len, bool /* allow_partial */) { |
| return usb_ffs_do_aio(h, data, len, true); |
| } |
| |
| static int usb_ffs_aio_write(usb_handle* h, const void* data, int len) { |
| return usb_ffs_do_aio(h, data, len, false); |
| } |
| |
| static void usb_ffs_close(usb_handle* h) { |
| LOG(INFO) << "closing functionfs transport"; |
| |
| h->bulk_out.reset(); |
| h->bulk_in.reset(); |
| |
| // Notify usb_adb_open_thread to open a new connection. |
| h->lock.lock(); |
| h->open_new_connection = true; |
| h->lock.unlock(); |
| h->notify.notify_one(); |
| } |
| |
| usb_handle* create_usb_handle(unsigned num_bufs, unsigned io_size) { |
| usb_handle* h = new usb_handle(); |
| |
| if (android::base::GetBoolProperty("sys.usb.ffs.aio_compat", false)) { |
| // Devices on older kernels (< 3.18) will not have aio support for ffs |
| // unless backported. Fall back on the non-aio functions instead. |
| h->write = usb_ffs_write; |
| h->read = usb_ffs_read; |
| } else { |
| h->write = usb_ffs_aio_write; |
| h->read = usb_ffs_aio_read; |
| aio_block_init(&h->read_aiob, num_bufs); |
| aio_block_init(&h->write_aiob, num_bufs); |
| } |
| h->io_size = io_size; |
| h->close = usb_ffs_close; |
| return h; |
| } |