| /* |
| * Copyright (C) 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "liblp/builder.h" |
| |
| #include <string.h> |
| |
| #include <algorithm> |
| #include <limits> |
| |
| #include <android-base/unique_fd.h> |
| |
| #include "liblp/liblp.h" |
| #include "liblp/property_fetcher.h" |
| #include "reader.h" |
| #include "utility.h" |
| |
| namespace android { |
| namespace fs_mgr { |
| |
| std::ostream& operator<<(std::ostream& os, const Extent& extent) { |
| switch (extent.GetExtentType()) { |
| case ExtentType::kZero: { |
| os << "type: Zero"; |
| break; |
| } |
| case ExtentType::kLinear: { |
| auto linear_extent = static_cast<const LinearExtent*>(&extent); |
| os << "type: Linear, physical sectors: " << linear_extent->physical_sector() |
| << ", end sectors: " << linear_extent->end_sector(); |
| break; |
| } |
| } |
| return os; |
| } |
| |
| bool LinearExtent::AddTo(LpMetadata* out) const { |
| if (device_index_ >= out->block_devices.size()) { |
| LERROR << "Extent references unknown block device."; |
| return false; |
| } |
| out->extents.emplace_back( |
| LpMetadataExtent{num_sectors_, LP_TARGET_TYPE_LINEAR, physical_sector_, device_index_}); |
| return true; |
| } |
| |
| bool LinearExtent::operator==(const android::fs_mgr::Extent& other) const { |
| if (other.GetExtentType() != ExtentType::kLinear) { |
| return false; |
| } |
| |
| auto other_ptr = static_cast<const LinearExtent*>(&other); |
| return num_sectors_ == other_ptr->num_sectors_ && |
| physical_sector_ == other_ptr->physical_sector_ && |
| device_index_ == other_ptr->device_index_; |
| } |
| |
| bool LinearExtent::OverlapsWith(const LinearExtent& other) const { |
| if (device_index_ != other.device_index()) { |
| return false; |
| } |
| return physical_sector() < other.end_sector() && other.physical_sector() < end_sector(); |
| } |
| |
| bool LinearExtent::OverlapsWith(const Interval& interval) const { |
| if (device_index_ != interval.device_index) { |
| return false; |
| } |
| return physical_sector() < interval.end && interval.start < end_sector(); |
| } |
| |
| Interval LinearExtent::AsInterval() const { |
| return Interval(device_index(), physical_sector(), end_sector()); |
| } |
| |
| bool ZeroExtent::AddTo(LpMetadata* out) const { |
| out->extents.emplace_back(LpMetadataExtent{num_sectors_, LP_TARGET_TYPE_ZERO, 0, 0}); |
| return true; |
| } |
| |
| bool ZeroExtent::operator==(const android::fs_mgr::Extent& other) const { |
| return other.GetExtentType() == ExtentType::kZero && num_sectors_ == other.num_sectors(); |
| } |
| |
| Partition::Partition(std::string_view name, std::string_view group_name, uint32_t attributes) |
| : name_(name), group_name_(group_name), attributes_(attributes), size_(0) {} |
| |
| void Partition::AddExtent(std::unique_ptr<Extent>&& extent) { |
| size_ += extent->num_sectors() * LP_SECTOR_SIZE; |
| |
| if (LinearExtent* new_extent = extent->AsLinearExtent()) { |
| if (!extents_.empty() && extents_.back()->AsLinearExtent()) { |
| LinearExtent* prev_extent = extents_.back()->AsLinearExtent(); |
| if (prev_extent->end_sector() == new_extent->physical_sector() && |
| prev_extent->device_index() == new_extent->device_index()) { |
| // If the previous extent can be merged into this new one, do so |
| // to avoid creating unnecessary extents. |
| extent = std::make_unique<LinearExtent>( |
| prev_extent->num_sectors() + new_extent->num_sectors(), |
| prev_extent->device_index(), prev_extent->physical_sector()); |
| extents_.pop_back(); |
| } |
| } |
| } |
| extents_.push_back(std::move(extent)); |
| } |
| |
| void Partition::RemoveExtents() { |
| size_ = 0; |
| extents_.clear(); |
| } |
| |
| void Partition::ShrinkTo(uint64_t aligned_size) { |
| if (aligned_size == 0) { |
| RemoveExtents(); |
| return; |
| } |
| |
| // Remove or shrink extents of any kind until the total partition size is |
| // equal to the requested size. |
| uint64_t sectors_to_remove = (size_ - aligned_size) / LP_SECTOR_SIZE; |
| while (sectors_to_remove) { |
| Extent* extent = extents_.back().get(); |
| if (extent->num_sectors() > sectors_to_remove) { |
| size_ -= sectors_to_remove * LP_SECTOR_SIZE; |
| extent->set_num_sectors(extent->num_sectors() - sectors_to_remove); |
| break; |
| } |
| size_ -= (extent->num_sectors() * LP_SECTOR_SIZE); |
| sectors_to_remove -= extent->num_sectors(); |
| extents_.pop_back(); |
| } |
| DCHECK(size_ == aligned_size); |
| } |
| |
| Partition Partition::GetBeginningExtents(uint64_t aligned_size) const { |
| Partition p(name_, group_name_, attributes_); |
| for (const auto& extent : extents_) { |
| auto le = extent->AsLinearExtent(); |
| if (le) { |
| p.AddExtent(std::make_unique<LinearExtent>(*le)); |
| } else { |
| p.AddExtent(std::make_unique<ZeroExtent>(extent->num_sectors())); |
| } |
| } |
| p.ShrinkTo(aligned_size); |
| return p; |
| } |
| |
| uint64_t Partition::BytesOnDisk() const { |
| uint64_t sectors = 0; |
| for (const auto& extent : extents_) { |
| if (!extent->AsLinearExtent()) { |
| continue; |
| } |
| sectors += extent->num_sectors(); |
| } |
| return sectors * LP_SECTOR_SIZE; |
| } |
| |
| std::unique_ptr<MetadataBuilder> MetadataBuilder::New(const IPartitionOpener& opener, |
| const std::string& super_partition, |
| uint32_t slot_number) { |
| std::unique_ptr<LpMetadata> metadata = ReadMetadata(opener, super_partition, slot_number); |
| if (!metadata) { |
| return nullptr; |
| } |
| return New(*metadata.get(), &opener); |
| } |
| |
| std::unique_ptr<MetadataBuilder> MetadataBuilder::New(const std::string& super_partition, |
| uint32_t slot_number) { |
| return New(PartitionOpener(), super_partition, slot_number); |
| } |
| |
| std::unique_ptr<MetadataBuilder> MetadataBuilder::New( |
| const std::vector<BlockDeviceInfo>& block_devices, const std::string& super_partition, |
| uint32_t metadata_max_size, uint32_t metadata_slot_count) { |
| std::unique_ptr<MetadataBuilder> builder(new MetadataBuilder()); |
| if (!builder->Init(block_devices, super_partition, metadata_max_size, metadata_slot_count)) { |
| return nullptr; |
| } |
| return builder; |
| } |
| |
| std::unique_ptr<MetadataBuilder> MetadataBuilder::New(const LpMetadata& metadata, |
| const IPartitionOpener* opener) { |
| std::unique_ptr<MetadataBuilder> builder(new MetadataBuilder()); |
| if (!builder->Init(metadata)) { |
| return nullptr; |
| } |
| if (opener) { |
| for (size_t i = 0; i < builder->block_devices_.size(); i++) { |
| std::string partition_name = builder->GetBlockDevicePartitionName(i); |
| BlockDeviceInfo device_info; |
| if (opener->GetInfo(partition_name, &device_info)) { |
| builder->UpdateBlockDeviceInfo(i, device_info); |
| } |
| } |
| } |
| return builder; |
| } |
| |
| std::unique_ptr<MetadataBuilder> MetadataBuilder::NewForUpdate(const IPartitionOpener& opener, |
| const std::string& source_partition, |
| uint32_t source_slot_number, |
| uint32_t target_slot_number, |
| bool always_keep_source_slot) { |
| auto metadata = ReadMetadata(opener, source_partition, source_slot_number); |
| if (!metadata) { |
| return nullptr; |
| } |
| |
| // On retrofit DAP devices, modify the metadata so that it is suitable for being written |
| // to the target slot later. We detect retrofit DAP devices by checking the super partition |
| // name and system properties. |
| // See comments for UpdateMetadataForOtherSuper. |
| auto super_device = GetMetadataSuperBlockDevice(*metadata.get()); |
| if (android::fs_mgr::GetBlockDevicePartitionName(*super_device) != "super" && |
| IsRetrofitDynamicPartitionsDevice()) { |
| if (!UpdateMetadataForOtherSuper(metadata.get(), source_slot_number, target_slot_number)) { |
| return nullptr; |
| } |
| } |
| |
| if (IPropertyFetcher::GetInstance()->GetBoolProperty("ro.virtual_ab.enabled", false)) { |
| if (always_keep_source_slot) { |
| // always_keep_source_slot implies the target build does not support snapshots. |
| // Clear unsupported attributes. |
| SetMetadataHeaderV0(metadata.get()); |
| } else { |
| // !always_keep_source_slot implies the target build supports snapshots. Do snapshot |
| // updates. |
| if (!UpdateMetadataForInPlaceSnapshot(metadata.get(), source_slot_number, |
| target_slot_number)) { |
| return nullptr; |
| } |
| } |
| } |
| |
| return New(*metadata.get(), &opener); |
| } |
| |
| // For retrofit DAP devices, there are (conceptually) two super partitions. We'll need to translate |
| // block device and group names to update their slot suffixes. |
| // (On the other hand, On non-retrofit DAP devices there is only one location for metadata: the |
| // super partition. update_engine will remove and resize partitions as needed.) |
| bool MetadataBuilder::UpdateMetadataForOtherSuper(LpMetadata* metadata, uint32_t source_slot_number, |
| uint32_t target_slot_number) { |
| // Clear partitions and extents, since they have no meaning on the target |
| // slot. We also clear groups since they are re-added during OTA. |
| metadata->partitions.clear(); |
| metadata->extents.clear(); |
| metadata->groups.clear(); |
| |
| std::string source_slot_suffix = SlotSuffixForSlotNumber(source_slot_number); |
| std::string target_slot_suffix = SlotSuffixForSlotNumber(target_slot_number); |
| |
| // Translate block devices. |
| auto source_block_devices = std::move(metadata->block_devices); |
| for (const auto& source_block_device : source_block_devices) { |
| std::string partition_name = |
| android::fs_mgr::GetBlockDevicePartitionName(source_block_device); |
| std::string slot_suffix = GetPartitionSlotSuffix(partition_name); |
| if (slot_suffix.empty() || slot_suffix != source_slot_suffix) { |
| // This should never happen. It means that the source metadata |
| // refers to a target or unknown block device. |
| LERROR << "Invalid block device for slot " << source_slot_suffix << ": " |
| << partition_name; |
| return false; |
| } |
| std::string new_name = |
| partition_name.substr(0, partition_name.size() - slot_suffix.size()) + |
| target_slot_suffix; |
| |
| auto new_device = source_block_device; |
| if (!UpdateBlockDevicePartitionName(&new_device, new_name)) { |
| LERROR << "Partition name too long: " << new_name; |
| return false; |
| } |
| metadata->block_devices.emplace_back(new_device); |
| } |
| |
| return true; |
| } |
| |
| MetadataBuilder::MetadataBuilder() : auto_slot_suffixing_(false) { |
| memset(&geometry_, 0, sizeof(geometry_)); |
| geometry_.magic = LP_METADATA_GEOMETRY_MAGIC; |
| geometry_.struct_size = sizeof(geometry_); |
| |
| memset(&header_, 0, sizeof(header_)); |
| header_.magic = LP_METADATA_HEADER_MAGIC; |
| header_.major_version = LP_METADATA_MAJOR_VERSION; |
| header_.minor_version = LP_METADATA_MINOR_VERSION_MIN; |
| header_.header_size = sizeof(LpMetadataHeaderV1_0); |
| header_.partitions.entry_size = sizeof(LpMetadataPartition); |
| header_.extents.entry_size = sizeof(LpMetadataExtent); |
| header_.groups.entry_size = sizeof(LpMetadataPartitionGroup); |
| header_.block_devices.entry_size = sizeof(LpMetadataBlockDevice); |
| } |
| |
| bool MetadataBuilder::Init(const LpMetadata& metadata) { |
| geometry_ = metadata.geometry; |
| block_devices_ = metadata.block_devices; |
| |
| // Bump the version as necessary to copy any newer fields. |
| if (metadata.header.minor_version >= LP_METADATA_VERSION_FOR_EXPANDED_HEADER) { |
| RequireExpandedMetadataHeader(); |
| header_.flags = metadata.header.flags; |
| } |
| |
| for (const auto& group : metadata.groups) { |
| std::string group_name = GetPartitionGroupName(group); |
| if (!AddGroup(group_name, group.maximum_size)) { |
| return false; |
| } |
| } |
| |
| for (const auto& partition : metadata.partitions) { |
| std::string group_name = GetPartitionGroupName(metadata.groups[partition.group_index]); |
| Partition* builder = |
| AddPartition(GetPartitionName(partition), group_name, partition.attributes); |
| if (!builder) { |
| return false; |
| } |
| ImportExtents(builder, metadata, partition); |
| } |
| return true; |
| } |
| |
| void MetadataBuilder::ImportExtents(Partition* dest, const LpMetadata& metadata, |
| const LpMetadataPartition& source) { |
| for (size_t i = 0; i < source.num_extents; i++) { |
| const LpMetadataExtent& extent = metadata.extents[source.first_extent_index + i]; |
| if (extent.target_type == LP_TARGET_TYPE_LINEAR) { |
| auto copy = std::make_unique<LinearExtent>(extent.num_sectors, extent.target_source, |
| extent.target_data); |
| dest->AddExtent(std::move(copy)); |
| } else if (extent.target_type == LP_TARGET_TYPE_ZERO) { |
| auto copy = std::make_unique<ZeroExtent>(extent.num_sectors); |
| dest->AddExtent(std::move(copy)); |
| } |
| } |
| } |
| |
| static bool VerifyDeviceProperties(const BlockDeviceInfo& device_info) { |
| if (device_info.logical_block_size == 0) { |
| LERROR << "Block device " << device_info.partition_name |
| << " logical block size must not be zero."; |
| return false; |
| } |
| if (device_info.logical_block_size % LP_SECTOR_SIZE != 0) { |
| LERROR << "Block device " << device_info.partition_name |
| << " logical block size must be a multiple of 512."; |
| return false; |
| } |
| if (device_info.size % device_info.logical_block_size != 0) { |
| LERROR << "Block device " << device_info.partition_name |
| << " size must be a multiple of its block size."; |
| return false; |
| } |
| if (device_info.alignment_offset % LP_SECTOR_SIZE != 0) { |
| LERROR << "Block device " << device_info.partition_name |
| << " alignment offset is not sector-aligned."; |
| return false; |
| } |
| if (device_info.alignment % LP_SECTOR_SIZE != 0) { |
| LERROR << "Block device " << device_info.partition_name |
| << " partition alignment is not sector-aligned."; |
| return false; |
| } |
| return true; |
| } |
| |
| bool MetadataBuilder::Init(const std::vector<BlockDeviceInfo>& block_devices, |
| const std::string& super_partition, uint32_t metadata_max_size, |
| uint32_t metadata_slot_count) { |
| if (metadata_max_size < sizeof(LpMetadataHeader)) { |
| LERROR << "Invalid metadata maximum size."; |
| return false; |
| } |
| if (metadata_slot_count == 0) { |
| LERROR << "Invalid metadata slot count."; |
| return false; |
| } |
| if (block_devices.empty()) { |
| LERROR << "No block devices were specified."; |
| return false; |
| } |
| |
| // Align the metadata size up to the nearest sector. |
| if (!AlignTo(metadata_max_size, LP_SECTOR_SIZE, &metadata_max_size)) { |
| LERROR << "Max metadata size " << metadata_max_size << " is too large."; |
| return false; |
| } |
| |
| // Validate and build the block device list. |
| uint32_t logical_block_size = 0; |
| for (const auto& device_info : block_devices) { |
| if (!VerifyDeviceProperties(device_info)) { |
| return false; |
| } |
| |
| if (!logical_block_size) { |
| logical_block_size = device_info.logical_block_size; |
| } |
| if (logical_block_size != device_info.logical_block_size) { |
| LERROR << "All partitions must have the same logical block size."; |
| return false; |
| } |
| |
| LpMetadataBlockDevice out = {}; |
| out.alignment = device_info.alignment; |
| out.alignment_offset = device_info.alignment_offset; |
| out.size = device_info.size; |
| if (device_info.partition_name.size() > sizeof(out.partition_name)) { |
| LERROR << "Partition name " << device_info.partition_name << " exceeds maximum length."; |
| return false; |
| } |
| strncpy(out.partition_name, device_info.partition_name.c_str(), sizeof(out.partition_name)); |
| |
| // In the case of the super partition, this field will be adjusted |
| // later. For all partitions, the first 512 bytes are considered |
| // untouched to be compatible code that looks for an MBR. Thus we |
| // start counting free sectors at sector 1, not 0. |
| uint64_t free_area_start = LP_SECTOR_SIZE; |
| bool ok; |
| if (out.alignment) { |
| ok = AlignTo(free_area_start, out.alignment, &free_area_start); |
| } else { |
| ok = AlignTo(free_area_start, logical_block_size, &free_area_start); |
| } |
| if (!ok) { |
| LERROR << "Integer overflow computing free area start"; |
| return false; |
| } |
| out.first_logical_sector = free_area_start / LP_SECTOR_SIZE; |
| |
| // There must be one logical block of space available. |
| uint64_t minimum_size = out.first_logical_sector * LP_SECTOR_SIZE + logical_block_size; |
| if (device_info.size < minimum_size) { |
| LERROR << "Block device " << device_info.partition_name |
| << " is too small to hold any logical partitions."; |
| return false; |
| } |
| |
| // The "root" of the super partition is always listed first. |
| if (device_info.partition_name == super_partition) { |
| block_devices_.emplace(block_devices_.begin(), out); |
| } else { |
| block_devices_.emplace_back(out); |
| } |
| } |
| if (GetBlockDevicePartitionName(0) != super_partition) { |
| LERROR << "No super partition was specified."; |
| return false; |
| } |
| |
| LpMetadataBlockDevice& super = block_devices_[0]; |
| |
| // We reserve a geometry block (4KB) plus space for each copy of the |
| // maximum size of a metadata blob. Then, we double that space since |
| // we store a backup copy of everything. |
| uint64_t total_reserved = GetTotalMetadataSize(metadata_max_size, metadata_slot_count); |
| if (super.size < total_reserved) { |
| LERROR << "Attempting to create metadata on a block device that is too small."; |
| return false; |
| } |
| |
| // Compute the first free sector, factoring in alignment. |
| uint64_t free_area_start = total_reserved; |
| bool ok; |
| if (super.alignment) { |
| ok = AlignTo(free_area_start, super.alignment, &free_area_start); |
| } else { |
| ok = AlignTo(free_area_start, logical_block_size, &free_area_start); |
| } |
| if (!ok) { |
| LERROR << "Integer overflow computing free area start"; |
| return false; |
| } |
| super.first_logical_sector = free_area_start / LP_SECTOR_SIZE; |
| |
| // There must be one logical block of free space remaining (enough for one partition). |
| uint64_t minimum_disk_size = (super.first_logical_sector * LP_SECTOR_SIZE) + logical_block_size; |
| if (super.size < minimum_disk_size) { |
| LERROR << "Device must be at least " << minimum_disk_size << " bytes, only has " |
| << super.size; |
| return false; |
| } |
| |
| geometry_.metadata_max_size = metadata_max_size; |
| geometry_.metadata_slot_count = metadata_slot_count; |
| geometry_.logical_block_size = logical_block_size; |
| |
| if (!AddGroup(std::string(kDefaultGroup), 0)) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool MetadataBuilder::AddGroup(std::string_view group_name, uint64_t maximum_size) { |
| if (FindGroup(group_name)) { |
| LERROR << "Group already exists: " << group_name; |
| return false; |
| } |
| groups_.push_back(std::make_unique<PartitionGroup>(group_name, maximum_size)); |
| return true; |
| } |
| |
| Partition* MetadataBuilder::AddPartition(const std::string& name, uint32_t attributes) { |
| return AddPartition(name, kDefaultGroup, attributes); |
| } |
| |
| Partition* MetadataBuilder::AddPartition(std::string_view name, std::string_view group_name, |
| uint32_t attributes) { |
| if (name.empty()) { |
| LERROR << "Partition must have a non-empty name."; |
| return nullptr; |
| } |
| if (FindPartition(name)) { |
| LERROR << "Attempting to create duplication partition with name: " << name; |
| return nullptr; |
| } |
| if (!FindGroup(group_name)) { |
| LERROR << "Could not find partition group: " << group_name; |
| return nullptr; |
| } |
| partitions_.push_back(std::make_unique<Partition>(name, group_name, attributes)); |
| return partitions_.back().get(); |
| } |
| |
| Partition* MetadataBuilder::FindPartition(std::string_view name) const { |
| for (const auto& partition : partitions_) { |
| if (partition->name() == name) { |
| return partition.get(); |
| } |
| } |
| return nullptr; |
| } |
| |
| PartitionGroup* MetadataBuilder::FindGroup(std::string_view group_name) const { |
| for (const auto& group : groups_) { |
| if (group->name() == group_name) { |
| return group.get(); |
| } |
| } |
| return nullptr; |
| } |
| |
| uint64_t MetadataBuilder::TotalSizeOfGroup(PartitionGroup* group) const { |
| uint64_t total = 0; |
| for (const auto& partition : partitions_) { |
| if (partition->group_name() != group->name()) { |
| continue; |
| } |
| total += partition->BytesOnDisk(); |
| } |
| return total; |
| } |
| |
| void MetadataBuilder::RemovePartition(std::string_view name) { |
| for (auto iter = partitions_.begin(); iter != partitions_.end(); iter++) { |
| if ((*iter)->name() == name) { |
| partitions_.erase(iter); |
| return; |
| } |
| } |
| } |
| |
| void MetadataBuilder::ExtentsToFreeList(const std::vector<Interval>& extents, |
| std::vector<Interval>* free_regions) const { |
| // Convert the extent list into a list of gaps between the extents; i.e., |
| // the list of ranges that are free on the disk. |
| for (size_t i = 1; i < extents.size(); i++) { |
| const Interval& previous = extents[i - 1]; |
| const Interval& current = extents[i]; |
| DCHECK(previous.device_index == current.device_index); |
| |
| uint64_t aligned; |
| if (!AlignSector(block_devices_[current.device_index], previous.end, &aligned)) { |
| LERROR << "Sector " << previous.end << " caused integer overflow."; |
| continue; |
| } |
| if (aligned >= current.start) { |
| // There is no gap between these two extents, try the next one. |
| // Note that we check with >= instead of >, since alignment may |
| // bump the ending sector past the beginning of the next extent. |
| continue; |
| } |
| |
| // The new interval represents the free space starting at the end of |
| // the previous interval, and ending at the start of the next interval. |
| free_regions->emplace_back(current.device_index, aligned, current.start); |
| } |
| } |
| |
| auto MetadataBuilder::GetFreeRegions() const -> std::vector<Interval> { |
| std::vector<Interval> free_regions; |
| |
| // Collect all extents in the partition table, per-device, then sort them |
| // by starting sector. |
| std::vector<std::vector<Interval>> device_extents(block_devices_.size()); |
| for (const auto& partition : partitions_) { |
| for (const auto& extent : partition->extents()) { |
| LinearExtent* linear = extent->AsLinearExtent(); |
| if (!linear) { |
| continue; |
| } |
| CHECK(linear->device_index() < device_extents.size()); |
| auto& extents = device_extents[linear->device_index()]; |
| extents.emplace_back(linear->device_index(), linear->physical_sector(), |
| linear->physical_sector() + extent->num_sectors()); |
| } |
| } |
| |
| // Add 0-length intervals for the first and last sectors. This will cause |
| // ExtentToFreeList() to treat the space in between as available. |
| for (size_t i = 0; i < device_extents.size(); i++) { |
| auto& extents = device_extents[i]; |
| const auto& block_device = block_devices_[i]; |
| |
| uint64_t first_sector = block_device.first_logical_sector; |
| uint64_t last_sector = block_device.size / LP_SECTOR_SIZE; |
| extents.emplace_back(i, first_sector, first_sector); |
| extents.emplace_back(i, last_sector, last_sector); |
| |
| std::sort(extents.begin(), extents.end()); |
| ExtentsToFreeList(extents, &free_regions); |
| } |
| return free_regions; |
| } |
| |
| bool MetadataBuilder::ValidatePartitionSizeChange(Partition* partition, uint64_t old_size, |
| uint64_t new_size, bool force_check) { |
| PartitionGroup* group = FindGroup(partition->group_name()); |
| CHECK(group); |
| |
| if (!force_check && new_size <= old_size) { |
| return true; |
| } |
| |
| // Figure out how much we need to allocate, and whether our group has |
| // enough space remaining. |
| uint64_t space_needed = new_size - old_size; |
| if (group->maximum_size() > 0) { |
| uint64_t group_size = TotalSizeOfGroup(group); |
| if (group_size >= group->maximum_size() || |
| group->maximum_size() - group_size < space_needed) { |
| LERROR << "Partition " << partition->name() << " is part of group " << group->name() |
| << " which does not have enough space free (" << space_needed << " requested, " |
| << group_size << " used out of " << group->maximum_size() << ")"; |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| Interval Interval::Intersect(const Interval& a, const Interval& b) { |
| Interval ret = a; |
| if (a.device_index != b.device_index) { |
| ret.start = ret.end = a.start; // set length to 0 to indicate no intersection. |
| return ret; |
| } |
| ret.start = std::max(a.start, b.start); |
| ret.end = std::max(ret.start, std::min(a.end, b.end)); |
| return ret; |
| } |
| |
| std::vector<Interval> Interval::Intersect(const std::vector<Interval>& a, |
| const std::vector<Interval>& b) { |
| std::vector<Interval> ret; |
| for (const Interval& a_interval : a) { |
| for (const Interval& b_interval : b) { |
| auto intersect = Intersect(a_interval, b_interval); |
| if (intersect.length() > 0) ret.emplace_back(std::move(intersect)); |
| } |
| } |
| return ret; |
| } |
| |
| std::unique_ptr<Extent> Interval::AsExtent() const { |
| return std::make_unique<LinearExtent>(length(), device_index, start); |
| } |
| |
| bool MetadataBuilder::GrowPartition(Partition* partition, uint64_t aligned_size, |
| const std::vector<Interval>& free_region_hint) { |
| uint64_t space_needed = aligned_size - partition->size(); |
| uint64_t sectors_needed = space_needed / LP_SECTOR_SIZE; |
| DCHECK(sectors_needed * LP_SECTOR_SIZE == space_needed); |
| |
| std::vector<Interval> free_regions = GetFreeRegions(); |
| if (!free_region_hint.empty()) |
| free_regions = Interval::Intersect(free_regions, free_region_hint); |
| |
| const uint64_t sectors_per_block = geometry_.logical_block_size / LP_SECTOR_SIZE; |
| CHECK_NE(sectors_per_block, 0); |
| CHECK(sectors_needed % sectors_per_block == 0); |
| |
| if (IsABDevice() && ShouldHalveSuper() && GetPartitionSlotSuffix(partition->name()) == "_b") { |
| // Allocate "a" partitions top-down and "b" partitions bottom-up, to |
| // minimize fragmentation during OTA. |
| free_regions = PrioritizeSecondHalfOfSuper(free_regions); |
| } |
| |
| // Note we store new extents in a temporary vector, and only commit them |
| // if we are guaranteed enough free space. |
| std::vector<std::unique_ptr<LinearExtent>> new_extents; |
| |
| // If the last extent in the partition has a size < alignment, then the |
| // difference is unallocatable due to being misaligned. We peek for that |
| // case here to avoid wasting space. |
| if (auto extent = ExtendFinalExtent(partition, free_regions, sectors_needed)) { |
| sectors_needed -= extent->num_sectors(); |
| new_extents.emplace_back(std::move(extent)); |
| } |
| |
| for (auto& region : free_regions) { |
| // Note: this comes first, since we may enter the loop not needing any |
| // more sectors. |
| if (!sectors_needed) { |
| break; |
| } |
| |
| if (region.length() % sectors_per_block != 0) { |
| // This should never happen, because it would imply that we |
| // once allocated an extent that was not a multiple of the |
| // block size. That extent would be rejected by DM_TABLE_LOAD. |
| LERROR << "Region " << region.start << ".." << region.end |
| << " is not a multiple of the block size, " << sectors_per_block; |
| |
| // If for some reason the final region is mis-sized we still want |
| // to be able to grow partitions. So just to be safe, round the |
| // region down to the nearest block. |
| region.end = region.start + (region.length() / sectors_per_block) * sectors_per_block; |
| if (!region.length()) { |
| continue; |
| } |
| } |
| |
| uint64_t sectors = std::min(sectors_needed, region.length()); |
| CHECK(sectors % sectors_per_block == 0); |
| |
| auto extent = std::make_unique<LinearExtent>(sectors, region.device_index, region.start); |
| new_extents.push_back(std::move(extent)); |
| sectors_needed -= sectors; |
| } |
| if (sectors_needed) { |
| LERROR << "Not enough free space to expand partition: " << partition->name(); |
| return false; |
| } |
| |
| // Everything succeeded, so commit the new extents. |
| for (auto& extent : new_extents) { |
| partition->AddExtent(std::move(extent)); |
| } |
| return true; |
| } |
| |
| std::vector<Interval> MetadataBuilder::PrioritizeSecondHalfOfSuper( |
| const std::vector<Interval>& free_list) { |
| const auto& super = block_devices_[0]; |
| uint64_t first_sector = super.first_logical_sector; |
| uint64_t last_sector = super.size / LP_SECTOR_SIZE; |
| uint64_t midpoint = first_sector + (last_sector - first_sector) / 2; |
| |
| // Choose an aligned sector for the midpoint. This could lead to one half |
| // being slightly larger than the other, but this will not restrict the |
| // size of partitions (it might lead to one extra extent if "B" overflows). |
| if (!AlignSector(super, midpoint, &midpoint)) { |
| LERROR << "Unexpected integer overflow aligning midpoint " << midpoint; |
| return free_list; |
| } |
| |
| std::vector<Interval> first_half; |
| std::vector<Interval> second_half; |
| for (const auto& region : free_list) { |
| // Note: deprioritze if not the main super partition. Even though we |
| // don't call this for retrofit devices, we will allow adding additional |
| // block devices on non-retrofit devices. |
| if (region.device_index != 0 || region.end <= midpoint) { |
| first_half.emplace_back(region); |
| continue; |
| } |
| if (region.start < midpoint && region.end > midpoint) { |
| // Split this into two regions. |
| first_half.emplace_back(region.device_index, region.start, midpoint); |
| second_half.emplace_back(region.device_index, midpoint, region.end); |
| } else { |
| second_half.emplace_back(region); |
| } |
| } |
| second_half.insert(second_half.end(), first_half.begin(), first_half.end()); |
| return second_half; |
| } |
| |
| std::unique_ptr<LinearExtent> MetadataBuilder::ExtendFinalExtent( |
| Partition* partition, const std::vector<Interval>& free_list, |
| uint64_t sectors_needed) const { |
| if (partition->extents().empty()) { |
| return nullptr; |
| } |
| LinearExtent* extent = partition->extents().back()->AsLinearExtent(); |
| if (!extent) { |
| return nullptr; |
| } |
| |
| // If the sector ends where the next aligned chunk begins, then there's |
| // no missing gap to try and allocate. |
| const auto& block_device = block_devices_[extent->device_index()]; |
| uint64_t next_aligned_sector; |
| if (!AlignSector(block_device, extent->end_sector(), &next_aligned_sector)) { |
| LERROR << "Integer overflow aligning sector " << extent->end_sector(); |
| return nullptr; |
| } |
| if (extent->end_sector() == next_aligned_sector) { |
| return nullptr; |
| } |
| |
| uint64_t num_sectors = std::min(next_aligned_sector - extent->end_sector(), sectors_needed); |
| auto new_extent = std::make_unique<LinearExtent>(num_sectors, extent->device_index(), |
| extent->end_sector()); |
| if (IsAnyRegionAllocated(*new_extent.get()) || |
| IsAnyRegionCovered(free_list, *new_extent.get())) { |
| LERROR << "Misaligned region " << new_extent->physical_sector() << ".." |
| << new_extent->end_sector() << " was allocated or marked allocatable."; |
| return nullptr; |
| } |
| return new_extent; |
| } |
| |
| bool MetadataBuilder::IsAnyRegionCovered(const std::vector<Interval>& regions, |
| const LinearExtent& candidate) const { |
| for (const auto& region : regions) { |
| if (candidate.OverlapsWith(region)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool MetadataBuilder::IsAnyRegionAllocated(const LinearExtent& candidate) const { |
| for (const auto& partition : partitions_) { |
| for (const auto& extent : partition->extents()) { |
| LinearExtent* linear = extent->AsLinearExtent(); |
| if (!linear) { |
| continue; |
| } |
| if (linear->OverlapsWith(candidate)) { |
| return true; |
| } |
| } |
| } |
| return false; |
| } |
| |
| void MetadataBuilder::ShrinkPartition(Partition* partition, uint64_t aligned_size) { |
| partition->ShrinkTo(aligned_size); |
| } |
| |
| std::unique_ptr<LpMetadata> MetadataBuilder::Export() { |
| if (!ValidatePartitionGroups()) { |
| return nullptr; |
| } |
| |
| std::unique_ptr<LpMetadata> metadata = std::make_unique<LpMetadata>(); |
| metadata->header = header_; |
| metadata->geometry = geometry_; |
| |
| // Assign this early so the extent table can read it. |
| for (const auto& block_device : block_devices_) { |
| metadata->block_devices.emplace_back(block_device); |
| if (auto_slot_suffixing_) { |
| metadata->block_devices.back().flags |= LP_BLOCK_DEVICE_SLOT_SUFFIXED; |
| } |
| } |
| |
| std::map<std::string, size_t> group_indices; |
| for (const auto& group : groups_) { |
| LpMetadataPartitionGroup out = {}; |
| |
| if (group->name().size() > sizeof(out.name)) { |
| LERROR << "Partition group name is too long: " << group->name(); |
| return nullptr; |
| } |
| if (auto_slot_suffixing_ && group->name() != kDefaultGroup) { |
| out.flags |= LP_GROUP_SLOT_SUFFIXED; |
| } |
| strncpy(out.name, group->name().c_str(), sizeof(out.name)); |
| out.maximum_size = group->maximum_size(); |
| |
| group_indices[group->name()] = metadata->groups.size(); |
| metadata->groups.push_back(out); |
| } |
| |
| // Flatten the partition and extent structures into an LpMetadata, which |
| // makes it very easy to validate, serialize, or pass on to device-mapper. |
| for (const auto& partition : partitions_) { |
| LpMetadataPartition part; |
| memset(&part, 0, sizeof(part)); |
| |
| if (partition->name().size() > sizeof(part.name)) { |
| LERROR << "Partition name is too long: " << partition->name(); |
| return nullptr; |
| } |
| if (partition->attributes() & ~(LP_PARTITION_ATTRIBUTE_MASK)) { |
| LERROR << "Partition " << partition->name() << " has unsupported attribute."; |
| return nullptr; |
| } |
| |
| if (partition->attributes() & LP_PARTITION_ATTRIBUTE_MASK_V1) { |
| static const uint16_t kMinVersion = LP_METADATA_VERSION_FOR_UPDATED_ATTR; |
| metadata->header.minor_version = std::max(metadata->header.minor_version, kMinVersion); |
| } |
| |
| strncpy(part.name, partition->name().c_str(), sizeof(part.name)); |
| part.first_extent_index = static_cast<uint32_t>(metadata->extents.size()); |
| part.num_extents = static_cast<uint32_t>(partition->extents().size()); |
| part.attributes = partition->attributes(); |
| if (auto_slot_suffixing_) { |
| part.attributes |= LP_PARTITION_ATTR_SLOT_SUFFIXED; |
| } |
| |
| auto iter = group_indices.find(partition->group_name()); |
| if (iter == group_indices.end()) { |
| LERROR << "Partition " << partition->name() << " is a member of unknown group " |
| << partition->group_name(); |
| return nullptr; |
| } |
| part.group_index = iter->second; |
| |
| for (const auto& extent : partition->extents()) { |
| if (!extent->AddTo(metadata.get())) { |
| return nullptr; |
| } |
| } |
| metadata->partitions.push_back(part); |
| } |
| |
| metadata->header.partitions.num_entries = static_cast<uint32_t>(metadata->partitions.size()); |
| metadata->header.extents.num_entries = static_cast<uint32_t>(metadata->extents.size()); |
| metadata->header.groups.num_entries = static_cast<uint32_t>(metadata->groups.size()); |
| metadata->header.block_devices.num_entries = |
| static_cast<uint32_t>(metadata->block_devices.size()); |
| return metadata; |
| } |
| |
| void MetadataBuilder::RequireExpandedMetadataHeader() { |
| if (header_.minor_version >= LP_METADATA_VERSION_FOR_EXPANDED_HEADER) { |
| return; |
| } |
| header_.minor_version = LP_METADATA_VERSION_FOR_EXPANDED_HEADER; |
| header_.header_size = sizeof(LpMetadataHeaderV1_2); |
| } |
| |
| uint64_t MetadataBuilder::AllocatableSpace() const { |
| uint64_t total_size = 0; |
| for (const auto& block_device : block_devices_) { |
| total_size += block_device.size - (block_device.first_logical_sector * LP_SECTOR_SIZE); |
| } |
| return total_size; |
| } |
| |
| uint64_t MetadataBuilder::UsedSpace() const { |
| uint64_t size = 0; |
| for (const auto& partition : partitions_) { |
| size += partition->size(); |
| } |
| return size; |
| } |
| |
| bool MetadataBuilder::AlignSector(const LpMetadataBlockDevice& block_device, uint64_t sector, |
| uint64_t* out) const { |
| // Note: when reading alignment info from the Kernel, we don't assume it |
| // is aligned to the sector size, so we round up to the nearest sector. |
| uint64_t lba = sector * LP_SECTOR_SIZE; |
| if (!AlignTo(lba, block_device.alignment, out)) { |
| return false; |
| } |
| if (!AlignTo(*out, LP_SECTOR_SIZE, out)) { |
| return false; |
| } |
| *out /= LP_SECTOR_SIZE; |
| return true; |
| } |
| |
| bool MetadataBuilder::FindBlockDeviceByName(const std::string& partition_name, |
| uint32_t* index) const { |
| for (size_t i = 0; i < block_devices_.size(); i++) { |
| if (GetBlockDevicePartitionName(i) == partition_name) { |
| *index = i; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool MetadataBuilder::HasBlockDevice(const std::string& partition_name) const { |
| uint32_t index; |
| return FindBlockDeviceByName(partition_name, &index); |
| } |
| |
| bool MetadataBuilder::GetBlockDeviceInfo(const std::string& partition_name, |
| BlockDeviceInfo* info) const { |
| uint32_t index; |
| if (!FindBlockDeviceByName(partition_name, &index)) { |
| LERROR << "No device named " << partition_name; |
| return false; |
| } |
| info->size = block_devices_[index].size; |
| info->alignment = block_devices_[index].alignment; |
| info->alignment_offset = block_devices_[index].alignment_offset; |
| info->logical_block_size = geometry_.logical_block_size; |
| info->partition_name = partition_name; |
| return true; |
| } |
| |
| bool MetadataBuilder::UpdateBlockDeviceInfo(const std::string& partition_name, |
| const BlockDeviceInfo& device_info) { |
| uint32_t index; |
| if (!FindBlockDeviceByName(partition_name, &index)) { |
| LERROR << "No device named " << partition_name; |
| return false; |
| } |
| return UpdateBlockDeviceInfo(index, device_info); |
| } |
| |
| bool MetadataBuilder::UpdateBlockDeviceInfo(size_t index, const BlockDeviceInfo& device_info) { |
| CHECK(index < block_devices_.size()); |
| |
| LpMetadataBlockDevice& block_device = block_devices_[index]; |
| if (device_info.size != block_device.size) { |
| LERROR << "Device size does not match (got " << device_info.size << ", expected " |
| << block_device.size << ")"; |
| return false; |
| } |
| if (geometry_.logical_block_size % device_info.logical_block_size) { |
| LERROR << "Device logical block size is misaligned (block size=" |
| << device_info.logical_block_size << ", alignment=" << geometry_.logical_block_size |
| << ")"; |
| return false; |
| } |
| |
| // The kernel does not guarantee these values are present, so we only |
| // replace existing values if the new values are non-zero. |
| if (device_info.alignment) { |
| block_device.alignment = device_info.alignment; |
| } |
| if (device_info.alignment_offset) { |
| block_device.alignment_offset = device_info.alignment_offset; |
| } |
| return true; |
| } |
| |
| bool MetadataBuilder::ResizePartition(Partition* partition, uint64_t requested_size, |
| const std::vector<Interval>& free_region_hint) { |
| // Align the space needed up to the nearest sector. |
| uint64_t aligned_size; |
| if (!AlignTo(requested_size, geometry_.logical_block_size, &aligned_size)) { |
| LERROR << "Cannot resize partition " << partition->name() << " to " << requested_size |
| << " bytes; integer overflow."; |
| return false; |
| } |
| uint64_t old_size = partition->size(); |
| |
| if (!ValidatePartitionSizeChange(partition, old_size, aligned_size, false)) { |
| return false; |
| } |
| |
| if (aligned_size > old_size) { |
| if (!GrowPartition(partition, aligned_size, free_region_hint)) { |
| return false; |
| } |
| } else if (aligned_size < partition->size()) { |
| ShrinkPartition(partition, aligned_size); |
| } |
| |
| if (partition->size() != old_size) { |
| LINFO << "Partition " << partition->name() << " will resize from " << old_size |
| << " bytes to " << aligned_size << " bytes"; |
| } |
| return true; |
| } |
| |
| std::vector<std::string> MetadataBuilder::ListGroups() const { |
| std::vector<std::string> names; |
| for (const auto& group : groups_) { |
| names.emplace_back(group->name()); |
| } |
| return names; |
| } |
| |
| void MetadataBuilder::RemoveGroupAndPartitions(std::string_view group_name) { |
| if (group_name == kDefaultGroup) { |
| // Cannot remove the default group. |
| return; |
| } |
| std::vector<std::string> partition_names; |
| for (const auto& partition : partitions_) { |
| if (partition->group_name() == group_name) { |
| partition_names.emplace_back(partition->name()); |
| } |
| } |
| |
| for (const auto& partition_name : partition_names) { |
| RemovePartition(partition_name); |
| } |
| for (auto iter = groups_.begin(); iter != groups_.end(); iter++) { |
| if ((*iter)->name() == group_name) { |
| groups_.erase(iter); |
| break; |
| } |
| } |
| } |
| |
| static bool CompareBlockDevices(const LpMetadataBlockDevice& first, |
| const LpMetadataBlockDevice& second) { |
| // Note: we don't compare alignment, since it's a performance thing and |
| // won't affect whether old extents continue to work. |
| return first.first_logical_sector == second.first_logical_sector && first.size == second.size && |
| android::fs_mgr::GetBlockDevicePartitionName(first) == |
| android::fs_mgr::GetBlockDevicePartitionName(second); |
| } |
| |
| bool MetadataBuilder::ImportPartitions(const LpMetadata& metadata, |
| const std::set<std::string>& partition_names) { |
| // The block device list must be identical. We do not try to be clever and |
| // allow ordering changes or changes that don't affect partitions. This |
| // process is designed to allow the most common flashing scenarios and more |
| // complex ones should require a wipe. |
| if (metadata.block_devices.size() != block_devices_.size()) { |
| LINFO << "Block device tables does not match."; |
| return false; |
| } |
| for (size_t i = 0; i < metadata.block_devices.size(); i++) { |
| const LpMetadataBlockDevice& old_device = metadata.block_devices[i]; |
| const LpMetadataBlockDevice& new_device = block_devices_[i]; |
| if (!CompareBlockDevices(old_device, new_device)) { |
| LINFO << "Block device tables do not match"; |
| return false; |
| } |
| } |
| |
| // Import named partitions. Note that we do not attempt to merge group |
| // information here. If the device changed its group names, the old |
| // partitions will fail to merge. The same could happen if the group |
| // allocation sizes change. |
| for (const auto& partition : metadata.partitions) { |
| std::string partition_name = GetPartitionName(partition); |
| if (partition_names.find(partition_name) == partition_names.end()) { |
| continue; |
| } |
| if (!ImportPartition(metadata, partition)) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool MetadataBuilder::ImportPartition(const LpMetadata& metadata, |
| const LpMetadataPartition& source) { |
| std::string partition_name = GetPartitionName(source); |
| Partition* partition = FindPartition(partition_name); |
| if (!partition) { |
| std::string group_name = GetPartitionGroupName(metadata.groups[source.group_index]); |
| partition = AddPartition(partition_name, group_name, source.attributes); |
| if (!partition) { |
| return false; |
| } |
| } |
| if (partition->size() > 0) { |
| LINFO << "Importing partition table would overwrite non-empty partition: " |
| << partition_name; |
| return false; |
| } |
| |
| ImportExtents(partition, metadata, source); |
| |
| // Note: we've already increased the partition size by calling |
| // ImportExtents(). In order to figure out the size before that, |
| // we would have to iterate the extents and add up the linear |
| // segments. Instead, we just force ValidatePartitionSizeChange |
| // to check if the current configuration is acceptable. |
| if (!ValidatePartitionSizeChange(partition, partition->size(), partition->size(), true)) { |
| partition->RemoveExtents(); |
| return false; |
| } |
| return true; |
| } |
| |
| void MetadataBuilder::SetAutoSlotSuffixing() { |
| auto_slot_suffixing_ = true; |
| } |
| |
| void MetadataBuilder::SetVirtualABDeviceFlag() { |
| RequireExpandedMetadataHeader(); |
| header_.flags |= LP_HEADER_FLAG_VIRTUAL_AB_DEVICE; |
| } |
| |
| bool MetadataBuilder::IsABDevice() { |
| return !IPropertyFetcher::GetInstance()->GetProperty("ro.boot.slot_suffix", "").empty(); |
| } |
| |
| bool MetadataBuilder::IsRetrofitDynamicPartitionsDevice() { |
| return IPropertyFetcher::GetInstance()->GetBoolProperty("ro.boot.dynamic_partitions_retrofit", |
| false); |
| } |
| |
| bool MetadataBuilder::ShouldHalveSuper() const { |
| return GetBlockDevicePartitionName(0) == LP_METADATA_DEFAULT_PARTITION_NAME && |
| !IPropertyFetcher::GetInstance()->GetBoolProperty("ro.virtual_ab.enabled", false); |
| } |
| |
| bool MetadataBuilder::AddLinearExtent(Partition* partition, const std::string& block_device, |
| uint64_t num_sectors, uint64_t physical_sector) { |
| uint32_t device_index; |
| if (!FindBlockDeviceByName(block_device, &device_index)) { |
| LERROR << "Could not find backing block device for extent: " << block_device; |
| return false; |
| } |
| |
| auto extent = std::make_unique<LinearExtent>(num_sectors, device_index, physical_sector); |
| partition->AddExtent(std::move(extent)); |
| return true; |
| } |
| |
| std::vector<Partition*> MetadataBuilder::ListPartitionsInGroup(std::string_view group_name) { |
| std::vector<Partition*> partitions; |
| for (const auto& partition : partitions_) { |
| if (partition->group_name() == group_name) { |
| partitions.emplace_back(partition.get()); |
| } |
| } |
| return partitions; |
| } |
| |
| bool MetadataBuilder::ChangePartitionGroup(Partition* partition, std::string_view group_name) { |
| if (!FindGroup(group_name)) { |
| LERROR << "Partition cannot change to unknown group: " << group_name; |
| return false; |
| } |
| partition->set_group_name(group_name); |
| return true; |
| } |
| |
| bool MetadataBuilder::ValidatePartitionGroups() const { |
| for (const auto& group : groups_) { |
| if (!group->maximum_size()) { |
| continue; |
| } |
| uint64_t used = TotalSizeOfGroup(group.get()); |
| if (used > group->maximum_size()) { |
| LERROR << "Partition group " << group->name() << " exceeds maximum size (" << used |
| << " bytes used, maximum " << group->maximum_size() << ")"; |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool MetadataBuilder::ChangeGroupSize(const std::string& group_name, uint64_t maximum_size) { |
| if (group_name == kDefaultGroup) { |
| LERROR << "Cannot change the size of the default group"; |
| return false; |
| } |
| PartitionGroup* group = FindGroup(group_name); |
| if (!group) { |
| LERROR << "Cannot change size of unknown partition group: " << group_name; |
| return false; |
| } |
| group->set_maximum_size(maximum_size); |
| return true; |
| } |
| |
| std::string MetadataBuilder::GetBlockDevicePartitionName(uint64_t index) const { |
| return index < block_devices_.size() |
| ? android::fs_mgr::GetBlockDevicePartitionName(block_devices_[index]) |
| : ""; |
| } |
| |
| uint64_t MetadataBuilder::logical_block_size() const { |
| return geometry_.logical_block_size; |
| } |
| |
| bool MetadataBuilder::VerifyExtentsAgainstSourceMetadata( |
| const MetadataBuilder& source_metadata, uint32_t source_slot_number, |
| const MetadataBuilder& target_metadata, uint32_t target_slot_number, |
| const std::vector<std::string>& partitions) { |
| for (const auto& base_name : partitions) { |
| // Find the partition in metadata with the slot suffix. |
| auto target_partition_name = base_name + SlotSuffixForSlotNumber(target_slot_number); |
| const auto target_partition = target_metadata.FindPartition(target_partition_name); |
| if (!target_partition) { |
| LERROR << "Failed to find partition " << target_partition_name << " in metadata slot " |
| << target_slot_number; |
| return false; |
| } |
| |
| auto source_partition_name = base_name + SlotSuffixForSlotNumber(source_slot_number); |
| const auto source_partition = source_metadata.FindPartition(source_partition_name); |
| if (!source_partition) { |
| LERROR << "Failed to find partition " << source_partition << " in metadata slot " |
| << source_slot_number; |
| return false; |
| } |
| |
| // We expect the partitions in the target metadata to have the identical extents as the |
| // one in the source metadata. Because they are copied in NewForUpdate. |
| if (target_partition->extents().size() != source_partition->extents().size()) { |
| LERROR << "Extents count mismatch for partition " << base_name << " target slot has " |
| << target_partition->extents().size() << ", source slot has " |
| << source_partition->extents().size(); |
| return false; |
| } |
| |
| for (size_t i = 0; i < target_partition->extents().size(); i++) { |
| const auto& src_extent = *source_partition->extents()[i]; |
| const auto& tgt_extent = *target_partition->extents()[i]; |
| if (tgt_extent != src_extent) { |
| LERROR << "Extents " << i << " is different for partition " << base_name; |
| LERROR << "tgt extent " << tgt_extent << "; src extent " << src_extent; |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| } // namespace fs_mgr |
| } // namespace android |