| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * icmp.c - convenience functions for translating ICMP and ICMPv6 packets. |
| */ |
| |
| #include <linux/icmp.h> |
| #include <netinet/icmp6.h> |
| #include <netinet/in.h> |
| #include <netinet/ip_icmp.h> |
| |
| #include "icmp.h" |
| #include "logging.h" |
| |
| /* function: icmp_guess_ttl |
| * Guesses the number of hops a received packet has traversed based on its TTL. |
| * ttl - the ttl of the received packet. |
| */ |
| uint8_t icmp_guess_ttl(uint8_t ttl) { |
| if (ttl > 128) { |
| return 255 - ttl; |
| } else if (ttl > 64) { |
| return 128 - ttl; |
| } else if (ttl > 32) { |
| return 64 - ttl; |
| } else { |
| return 32 - ttl; |
| } |
| } |
| |
| /* function: is_icmp_error |
| * Determines whether an ICMP type is an error message. |
| * type: the ICMP type |
| */ |
| int is_icmp_error(uint8_t type) { return type == 3 || type == 11 || type == 12; } |
| |
| /* function: is_icmp6_error |
| * Determines whether an ICMPv6 type is an error message. |
| * type: the ICMPv6 type |
| */ |
| int is_icmp6_error(uint8_t type) { return type < 128; } |
| |
| /* function: icmp_to_icmp6_type |
| * Maps ICMP types to ICMPv6 types. Partial implementation of RFC 6145, section 4.2. |
| * type - the ICMPv6 type |
| */ |
| uint8_t icmp_to_icmp6_type(uint8_t type, uint8_t code) { |
| switch (type) { |
| case ICMP_ECHO: |
| return ICMP6_ECHO_REQUEST; |
| |
| case ICMP_ECHOREPLY: |
| return ICMP6_ECHO_REPLY; |
| |
| case ICMP_TIME_EXCEEDED: |
| return ICMP6_TIME_EXCEEDED; |
| |
| case ICMP_DEST_UNREACH: |
| // These two types need special translation which we don't support yet. |
| if (code != ICMP_UNREACH_PROTOCOL && code != ICMP_UNREACH_NEEDFRAG) { |
| return ICMP6_DST_UNREACH; |
| } |
| } |
| |
| // We don't understand this ICMP type. Return parameter problem so the caller will bail out. |
| logmsg_dbg(ANDROID_LOG_DEBUG, "icmp_to_icmp6_type: unhandled ICMP type %d", type); |
| return ICMP6_PARAM_PROB; |
| } |
| |
| /* function: icmp_to_icmp6_code |
| * Maps ICMP codes to ICMPv6 codes. Partial implementation of RFC 6145, section 4.2. |
| * type - the ICMP type |
| * code - the ICMP code |
| */ |
| uint8_t icmp_to_icmp6_code(uint8_t type, uint8_t code) { |
| switch (type) { |
| case ICMP_ECHO: |
| case ICMP_ECHOREPLY: |
| return 0; |
| |
| case ICMP_TIME_EXCEEDED: |
| return code; |
| |
| case ICMP_DEST_UNREACH: |
| switch (code) { |
| case ICMP_UNREACH_NET: |
| case ICMP_UNREACH_HOST: |
| return ICMP6_DST_UNREACH_NOROUTE; |
| |
| case ICMP_UNREACH_PORT: |
| return ICMP6_DST_UNREACH_NOPORT; |
| |
| case ICMP_UNREACH_NET_PROHIB: |
| case ICMP_UNREACH_HOST_PROHIB: |
| case ICMP_UNREACH_FILTER_PROHIB: |
| case ICMP_UNREACH_PRECEDENCE_CUTOFF: |
| return ICMP6_DST_UNREACH_ADMIN; |
| |
| // Otherwise, we don't understand this ICMP type/code combination. Fall through. |
| } |
| } |
| logmsg_dbg(ANDROID_LOG_DEBUG, "icmp_to_icmp6_code: unhandled ICMP type/code %d/%d", type, code); |
| return 0; |
| } |
| |
| /* function: icmp6_to_icmp_type |
| * Maps ICMPv6 types to ICMP types. Partial implementation of RFC 6145, section 5.2. |
| * type - the ICMP type |
| */ |
| uint8_t icmp6_to_icmp_type(uint8_t type, uint8_t code) { |
| switch (type) { |
| case ICMP6_ECHO_REQUEST: |
| return ICMP_ECHO; |
| |
| case ICMP6_ECHO_REPLY: |
| return ICMP_ECHOREPLY; |
| |
| case ICMP6_DST_UNREACH: |
| return ICMP_DEST_UNREACH; |
| |
| case ICMP6_TIME_EXCEEDED: |
| return ICMP_TIME_EXCEEDED; |
| } |
| |
| // We don't understand this ICMP type. Return parameter problem so the caller will bail out. |
| logmsg_dbg(ANDROID_LOG_DEBUG, "icmp6_to_icmp_type: unhandled ICMP type/code %d/%d", type, code); |
| return ICMP_PARAMETERPROB; |
| } |
| |
| /* function: icmp6_to_icmp_code |
| * Maps ICMPv6 codes to ICMP codes. Partial implementation of RFC 6145, section 5.2. |
| * type - the ICMPv6 type |
| * code - the ICMPv6 code |
| */ |
| uint8_t icmp6_to_icmp_code(uint8_t type, uint8_t code) { |
| switch (type) { |
| case ICMP6_ECHO_REQUEST: |
| case ICMP6_ECHO_REPLY: |
| case ICMP6_TIME_EXCEEDED: |
| return code; |
| |
| case ICMP6_DST_UNREACH: |
| switch (code) { |
| case ICMP6_DST_UNREACH_NOROUTE: |
| return ICMP_UNREACH_HOST; |
| |
| case ICMP6_DST_UNREACH_ADMIN: |
| return ICMP_UNREACH_HOST_PROHIB; |
| |
| case ICMP6_DST_UNREACH_BEYONDSCOPE: |
| return ICMP_UNREACH_HOST; |
| |
| case ICMP6_DST_UNREACH_ADDR: |
| return ICMP_HOST_UNREACH; |
| |
| case ICMP6_DST_UNREACH_NOPORT: |
| return ICMP_UNREACH_PORT; |
| |
| // Otherwise, we don't understand this ICMPv6 type/code combination. Fall through. |
| } |
| } |
| |
| logmsg_dbg(ANDROID_LOG_DEBUG, "icmp6_to_icmp_code: unhandled ICMP type/code %d/%d", type, code); |
| return 0; |
| } |