system/stack/include/rfcdefs.h - LeafOS-Project/android_packages_modules_Bluetooth - Gitiles

 /******************************************************************************
  *
  *  Copyright 1999-2012 Broadcom Corporation
  *
  *  Licensed under the Apache License, Version 2.0 (the "License");
  *  you may not use this file except in compliance with the License.
  *  You may obtain a copy of the License at:
  *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software
  *  distributed under the License is distributed on an "AS IS" BASIS,
  *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *  See the License for the specific language governing permissions and
  *  limitations under the License.
  *
  ******************************************************************************/

 /****************************************************************************
  *
  *  This file contains definitions for the RFCOMM protocol
  *
  ****************************************************************************/

 #ifndef RFCDEFS_H
 #define RFCDEFS_H
 /*
  *  Server Channel Numbers (SCN) range between 1 and 30, inclusive
  */
 #define RFCOMM_MAX_SCN 30

 /*
  *  If nothing is negotiated MTU should be 127
 */
 #define RFCOMM_DEFAULT_MTU 127

 /*
  * Define used by RFCOMM TS frame types
 */
 #define RFCOMM_SABME 0x2F  // Start Asynchronous Balanced Mode (startup command)
 #define RFCOMM_UA 0x63  // Unnumbered Acknowledgement (response when connected)
 #define RFCOMM_DM \
   0x0F  // Disconnected Mode (response to a command when disconnected)
 #define RFCOMM_DISC 0x43  // Disconnect (disconnect command)
 #define RFCOMM_UIH 0xEF   // Unnumbered Information with Header check

 /*
  * Defenitions for the TS control frames
 */
 #define RFCOMM_CTRL_FRAME_LEN 3
 #define RFCOMM_MIN_OFFSET 5 /* ctrl 2 , len 1 or 2 bytes, credit 1 byte */
 #define RFCOMM_DATA_OVERHEAD (RFCOMM_MIN_OFFSET + 1) /* add 1 for checksum */

 #define RFCOMM_EA 1
 #define RFCOMM_EA_MASK 0x01
 #define RFCOMM_CR_MASK 0x02
 #define RFCOMM_SHIFT_CR 1
 #define RFCOMM_SHIFT_DLCI 2
 #define RFCOMM_SHIFT_DLCI2 6
 #define RFCOMM_PF 0x10
 #define RFCOMM_PF_MASK 0x10
 #define RFCOMM_PF_OFFSET 4
 #define RFCOMM_SHIFT_LENGTH1 1
 #define RFCOMM_SHIFT_LENGTH2 7
 #define RFCOMM_SHIFT_MX_CTRL_TYPE 2

 #define RFCOMM_INITIATOR_CMD 1
 #define RFCOMM_INITIATOR_RSP 0
 #define RFCOMM_RESPONDER_CMD 0
 #define RFCOMM_RESPONDER_RSP 1

 #define RFCOMM_PARSE_CTRL_FIELD(ea, cr, dlci, p_data)       \
   {                                                         \
     (ea) = *(p_data)&RFCOMM_EA;                             \
     (cr) = (*(p_data)&RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;   \
     (dlci) = *(p_data)++ >> RFCOMM_SHIFT_DLCI;              \
     if (!(ea)) (dlci) += *(p_data)++ << RFCOMM_SHIFT_DLCI2; \
   }

 #define RFCOMM_FORMAT_CTRL_FIELD(p_data, ea, cr, dlci) \
   (*(p_data)++ = (ea) | (cr) | ((dlci) << RFCOMM_SHIFT_DLCI))

 #define RFCOMM_PARSE_TYPE_FIELD(type, pf, p_data)              \
   {                                                            \
     (type) = *(p_data) & ~RFCOMM_PF_MASK;                      \
     (pf) = (*(p_data)++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET; \
   }

 #define RFCOMM_FORMAT_TYPE_FIELD(p_data, type, pf)             \
   *(p_data)++ = ((type) | ((pf) << RFCOMM_PF_OFFSET)) {        \
     (type) = *(p_data) & ~RFCOMM_PF_MASK;                      \
     (pf) = (*(p_data)++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET; \
   }

 #define RFCOMM_FRAME_IS_CMD(initiator, cr) \
   (((initiator) && !(cr)) || (!(initiator) && (cr)))

 #define RFCOMM_FRAME_IS_RSP(initiator, cr) \
   (((initiator) && (cr)) || (!(initiator) && !(cr)))

 #define RFCOMM_CR(initiator, is_command) \
   ((((initiator) && (is_command)) || (!(initiator) && !(is_command))) << 1)

 #define RFCOMM_I_CR(is_command) ((is_command) ? 0x02 : 0x00)

 #define RFCOMM_MAX_DLCI 61

 #define RFCOMM_VALID_DLCI(dlci) \
   (((dlci) == 0) || (((dlci) >= 2) && ((dlci) <= RFCOMM_MAX_DLCI)))

 /* Port Negotiation (PN) */
 #define RFCOMM_PN_DLCI_MASK 0x3F

 #define RFCOMM_PN_FRAM_TYPE_UIH 0x00
 #define RFCOMM_PN_FRAME_TYPE_MASK 0x0F

 #define RFCOMM_PN_CONV_LAYER_MASK 0xF0
 #define RFCOMM_PN_CONV_LAYER_TYPE_1 0
 #define RFCOMM_PN_CONV_LAYER_CBFC_I 0xF0
 #define RFCOMM_PN_CONV_LAYER_CBFC_R 0xE0

 #define RFCOMM_PN_PRIORITY_MASK 0x3F
 #define RFCOMM_PN_PRIORITY_0 0

 #define RFCOMM_PN_K_MASK 0x07

 #define RFCOMM_T1_DSEC 0 /* None negotiable in RFCOMM */
 #define RFCOMM_N2 0      /* Number of retransmissions */
 #define RFCOMM_K 0       /* Window size */
 #define RFCOMM_K_MAX 7   /* Max value of K for credit based flow control */

 #define RFCOMM_MSC_FC 0x02  /* Flow control*/
 #define RFCOMM_MSC_RTC 0x04 /* Ready to communicate*/
 #define RFCOMM_MSC_RTR 0x08 /* Ready to receive*/
 #define RFCOMM_MSC_IC 0x40  /* Incomming call indicator*/
 #define RFCOMM_MSC_DV 0x80  /* Data Valid*/

 #define RFCOMM_MSC_SHIFT_BREAK 4
 #define RFCOMM_MSC_BREAK_MASK 0xF0
 #define RFCOMM_MSC_BREAK_PRESENT_MASK 0x02

 #define RFCOMM_BAUD_RATE_2400 0x00
 #define RFCOMM_BAUD_RATE_4800 0x01
 #define RFCOMM_BAUD_RATE_7200 0x02
 #define RFCOMM_BAUD_RATE_9600 0x03
 #define RFCOMM_BAUD_RATE_19200 0x04
 #define RFCOMM_BAUD_RATE_38400 0x05
 #define RFCOMM_BAUD_RATE_57600 0x06
 #define RFCOMM_BAUD_RATE_115200 0x07
 #define RFCOMM_BAUD_RATE_230400 0x08

 #define RFCOMM_5_BITS 0x00
 #define RFCOMM_6_BITS 0x01
 #define RFCOMM_7_BITS 0x02
 #define RFCOMM_8_BITS 0x03

 #define RFCOMM_RPN_BITS_MASK 0x03
 #define RFCOMM_RPN_BITS_SHIFT 0

 #define RFCOMM_ONESTOPBIT 0x00
 #define RFCOMM_ONE5STOPBITS 0x01

 #define RFCOMM_RPN_STOP_BITS_MASK 0x01
 #define RFCOMM_RPN_STOP_BITS_SHIFT 2

 #define RFCOMM_PARITY_NO 0x00
 #define RFCOMM_PARITY_YES 0x01
 #define RFCOMM_RPN_PARITY_MASK 0x01
 #define RFCOMM_RPN_PARITY_SHIFT 3

 #define RFCOMM_ODD_PARITY 0x00
 #define RFCOMM_EVEN_PARITY 0x01
 #define RFCOMM_MARK_PARITY 0x02
 #define RFCOMM_SPACE_PARITY 0x03

 #define RFCOMM_RPN_PARITY_TYPE_MASK 0x03
 #define RFCOMM_RPN_PARITY_TYPE_SHIFT 4

 #define RFCOMM_FC_OFF 0x00
 #define RFCOMM_FC_XONXOFF_ON_INPUT 0x01
 #define RFCOMM_FC_XONXOFF_ON_OUTPUT 0x02
 #define RFCOMM_FC_RTR_ON_INPUT 0x04
 #define RFCOMM_FC_RTR_ON_OUTPUT 0x08
 #define RFCOMM_FC_RTC_ON_INPUT 0x10
 #define RFCOMM_FC_RTC_ON_OUTPUT 0x20
 #define RFCOMM_FC_MASK 0x3F

 #define RFCOMM_RPN_PM_BIT_RATE 0x0001
 #define RFCOMM_RPN_PM_DATA_BITS 0x0002
 #define RFCOMM_RPN_PM_STOP_BITS 0x0004
 #define RFCOMM_RPN_PM_PARITY 0x0008
 #define RFCOMM_RPN_PM_PARITY_TYPE 0x0010
 #define RFCOMM_RPN_PM_XON_CHAR 0x0020
 #define RFCOMM_RPN_PM_XOFF_CHAR 0x0040
 #define RFCOMM_RPN_PM_XONXOFF_ON_INPUT 0x0100
 #define RFCOMM_RPN_PM_XONXOFF_ON_OUTPUT 0x0200
 #define RFCOMM_RPN_PM_RTR_ON_INPUT 0x0400
 #define RFCOMM_RPN_PM_RTR_ON_OUTPUT 0x0800
 #define RFCOMM_RPN_PM_RTC_ON_INPUT 0x1000
 #define RFCOMM_RPN_PM_RTC_ON_OUTPUT 0x2000
 #define RFCOMM_RPN_PM_MASK 0x3F7F

 #define RFCOMM_RLS_ERROR 0x01
 #define RFCOMM_RLS_OVERRUN 0x02
 #define RFCOMM_RLS_PARITY 0x04
 #define RFCOMM_RLS_FRAMING 0x08

 /* Multiplexor channel uses DLCI 0 */
 #define RFCOMM_MX_DLCI 0

 /*
  * Define RFCOMM Multiplexer message types
 */
 #define RFCOMM_MX_PN 0x80
 #define RFCOMM_MX_PN_LEN 8

 #define RFCOMM_MX_CLD 0xC0
 #define RFCOMM_MX_CLD_LEN 0

 #define RFCOMM_MX_TEST 0x20

 #define RFCOMM_MX_FCON 0xA0
 #define RFCOMM_MX_FCON_LEN 0

 #define RFCOMM_MX_FCOFF 0x60
 #define RFCOMM_MX_FCOFF_LEN 0

 #define RFCOMM_MX_MSC 0xE0
 #define RFCOMM_MX_MSC_LEN_NO_BREAK 2
 #define RFCOMM_MX_MSC_LEN_WITH_BREAK 3

 #define RFCOMM_MX_NSC 0x10
 #define RFCOMM_MX_NSC_LEN 1

 #define RFCOMM_MX_RPN 0x90
 #define RFCOMM_MX_RPN_REQ_LEN 1
 #define RFCOMM_MX_RPN_LEN 8

 #define RFCOMM_MX_RLS 0x50
 #define RFCOMM_MX_RLS_LEN 2
 #endif
	/******************************************************************************
	*
	* Copyright 1999-2012 Broadcom Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at:
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*
	******************************************************************************/

	/****************************************************************************
	*
	* This file contains definitions for the RFCOMM protocol
	*
	****************************************************************************/

	#ifndef RFCDEFS_H
	#define RFCDEFS_H
	/*
	* Server Channel Numbers (SCN) range between 1 and 30, inclusive
	*/
	#define RFCOMM_MAX_SCN 30

	/*
	* If nothing is negotiated MTU should be 127
	*/
	#define RFCOMM_DEFAULT_MTU 127

	/*
	* Define used by RFCOMM TS frame types
	*/
	#define RFCOMM_SABME 0x2F // Start Asynchronous Balanced Mode (startup command)
	#define RFCOMM_UA 0x63 // Unnumbered Acknowledgement (response when connected)
	#define RFCOMM_DM \
	0x0F // Disconnected Mode (response to a command when disconnected)
	#define RFCOMM_DISC 0x43 // Disconnect (disconnect command)
	#define RFCOMM_UIH 0xEF // Unnumbered Information with Header check

	/*
	* Defenitions for the TS control frames
	*/
	#define RFCOMM_CTRL_FRAME_LEN 3
	#define RFCOMM_MIN_OFFSET 5 /* ctrl 2 , len 1 or 2 bytes, credit 1 byte */
	#define RFCOMM_DATA_OVERHEAD (RFCOMM_MIN_OFFSET + 1) /* add 1 for checksum */

	#define RFCOMM_EA 1
	#define RFCOMM_EA_MASK 0x01
	#define RFCOMM_CR_MASK 0x02
	#define RFCOMM_SHIFT_CR 1
	#define RFCOMM_SHIFT_DLCI 2
	#define RFCOMM_SHIFT_DLCI2 6
	#define RFCOMM_PF 0x10
	#define RFCOMM_PF_MASK 0x10
	#define RFCOMM_PF_OFFSET 4
	#define RFCOMM_SHIFT_LENGTH1 1
	#define RFCOMM_SHIFT_LENGTH2 7
	#define RFCOMM_SHIFT_MX_CTRL_TYPE 2

	#define RFCOMM_INITIATOR_CMD 1
	#define RFCOMM_INITIATOR_RSP 0
	#define RFCOMM_RESPONDER_CMD 0
	#define RFCOMM_RESPONDER_RSP 1

	#define RFCOMM_PARSE_CTRL_FIELD(ea, cr, dlci, p_data) \
	{ \
	(ea) = *(p_data)&RFCOMM_EA; \
	(cr) = (*(p_data)&RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR; \
	(dlci) = *(p_data)++ >> RFCOMM_SHIFT_DLCI; \
	if (!(ea)) (dlci) += *(p_data)++ << RFCOMM_SHIFT_DLCI2; \
	}

	#define RFCOMM_FORMAT_CTRL_FIELD(p_data, ea, cr, dlci) \
	(*(p_data)++ = (ea) \| (cr) \| ((dlci) << RFCOMM_SHIFT_DLCI))

	#define RFCOMM_PARSE_TYPE_FIELD(type, pf, p_data) \
	{ \
	(type) = *(p_data) & ~RFCOMM_PF_MASK; \
	(pf) = (*(p_data)++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET; \
	}

	#define RFCOMM_FORMAT_TYPE_FIELD(p_data, type, pf) \
	*(p_data)++ = ((type) \| ((pf) << RFCOMM_PF_OFFSET)) { \
	(type) = *(p_data) & ~RFCOMM_PF_MASK; \
	(pf) = (*(p_data)++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET; \
	}

	#define RFCOMM_FRAME_IS_CMD(initiator, cr) \
	(((initiator) && !(cr)) \|\| (!(initiator) && (cr)))

	#define RFCOMM_FRAME_IS_RSP(initiator, cr) \
	(((initiator) && (cr)) \|\| (!(initiator) && !(cr)))

	#define RFCOMM_CR(initiator, is_command) \
	((((initiator) && (is_command)) \|\| (!(initiator) && !(is_command))) << 1)

	#define RFCOMM_I_CR(is_command) ((is_command) ? 0x02 : 0x00)

	#define RFCOMM_MAX_DLCI 61

	#define RFCOMM_VALID_DLCI(dlci) \
	(((dlci) == 0) \|\| (((dlci) >= 2) && ((dlci) <= RFCOMM_MAX_DLCI)))

	/* Port Negotiation (PN) */
	#define RFCOMM_PN_DLCI_MASK 0x3F

	#define RFCOMM_PN_FRAM_TYPE_UIH 0x00
	#define RFCOMM_PN_FRAME_TYPE_MASK 0x0F

	#define RFCOMM_PN_CONV_LAYER_MASK 0xF0
	#define RFCOMM_PN_CONV_LAYER_TYPE_1 0
	#define RFCOMM_PN_CONV_LAYER_CBFC_I 0xF0
	#define RFCOMM_PN_CONV_LAYER_CBFC_R 0xE0

	#define RFCOMM_PN_PRIORITY_MASK 0x3F
	#define RFCOMM_PN_PRIORITY_0 0

	#define RFCOMM_PN_K_MASK 0x07

	#define RFCOMM_T1_DSEC 0 /* None negotiable in RFCOMM */
	#define RFCOMM_N2 0 /* Number of retransmissions */
	#define RFCOMM_K 0 /* Window size */
	#define RFCOMM_K_MAX 7 /* Max value of K for credit based flow control */

	#define RFCOMM_MSC_FC 0x02 /* Flow control*/
	#define RFCOMM_MSC_RTC 0x04 /* Ready to communicate*/
	#define RFCOMM_MSC_RTR 0x08 /* Ready to receive*/
	#define RFCOMM_MSC_IC 0x40 /* Incomming call indicator*/
	#define RFCOMM_MSC_DV 0x80 /* Data Valid*/

	#define RFCOMM_MSC_SHIFT_BREAK 4
	#define RFCOMM_MSC_BREAK_MASK 0xF0
	#define RFCOMM_MSC_BREAK_PRESENT_MASK 0x02

	#define RFCOMM_BAUD_RATE_2400 0x00
	#define RFCOMM_BAUD_RATE_4800 0x01
	#define RFCOMM_BAUD_RATE_7200 0x02
	#define RFCOMM_BAUD_RATE_9600 0x03
	#define RFCOMM_BAUD_RATE_19200 0x04
	#define RFCOMM_BAUD_RATE_38400 0x05
	#define RFCOMM_BAUD_RATE_57600 0x06
	#define RFCOMM_BAUD_RATE_115200 0x07
	#define RFCOMM_BAUD_RATE_230400 0x08

	#define RFCOMM_5_BITS 0x00
	#define RFCOMM_6_BITS 0x01
	#define RFCOMM_7_BITS 0x02
	#define RFCOMM_8_BITS 0x03

	#define RFCOMM_RPN_BITS_MASK 0x03
	#define RFCOMM_RPN_BITS_SHIFT 0

	#define RFCOMM_ONESTOPBIT 0x00
	#define RFCOMM_ONE5STOPBITS 0x01

	#define RFCOMM_RPN_STOP_BITS_MASK 0x01
	#define RFCOMM_RPN_STOP_BITS_SHIFT 2

	#define RFCOMM_PARITY_NO 0x00
	#define RFCOMM_PARITY_YES 0x01
	#define RFCOMM_RPN_PARITY_MASK 0x01
	#define RFCOMM_RPN_PARITY_SHIFT 3

	#define RFCOMM_ODD_PARITY 0x00
	#define RFCOMM_EVEN_PARITY 0x01
	#define RFCOMM_MARK_PARITY 0x02
	#define RFCOMM_SPACE_PARITY 0x03

	#define RFCOMM_RPN_PARITY_TYPE_MASK 0x03
	#define RFCOMM_RPN_PARITY_TYPE_SHIFT 4

	#define RFCOMM_FC_OFF 0x00
	#define RFCOMM_FC_XONXOFF_ON_INPUT 0x01
	#define RFCOMM_FC_XONXOFF_ON_OUTPUT 0x02
	#define RFCOMM_FC_RTR_ON_INPUT 0x04
	#define RFCOMM_FC_RTR_ON_OUTPUT 0x08
	#define RFCOMM_FC_RTC_ON_INPUT 0x10
	#define RFCOMM_FC_RTC_ON_OUTPUT 0x20
	#define RFCOMM_FC_MASK 0x3F

	#define RFCOMM_RPN_PM_BIT_RATE 0x0001
	#define RFCOMM_RPN_PM_DATA_BITS 0x0002
	#define RFCOMM_RPN_PM_STOP_BITS 0x0004
	#define RFCOMM_RPN_PM_PARITY 0x0008
	#define RFCOMM_RPN_PM_PARITY_TYPE 0x0010
	#define RFCOMM_RPN_PM_XON_CHAR 0x0020
	#define RFCOMM_RPN_PM_XOFF_CHAR 0x0040
	#define RFCOMM_RPN_PM_XONXOFF_ON_INPUT 0x0100
	#define RFCOMM_RPN_PM_XONXOFF_ON_OUTPUT 0x0200
	#define RFCOMM_RPN_PM_RTR_ON_INPUT 0x0400
	#define RFCOMM_RPN_PM_RTR_ON_OUTPUT 0x0800
	#define RFCOMM_RPN_PM_RTC_ON_INPUT 0x1000
	#define RFCOMM_RPN_PM_RTC_ON_OUTPUT 0x2000
	#define RFCOMM_RPN_PM_MASK 0x3F7F

	#define RFCOMM_RLS_ERROR 0x01
	#define RFCOMM_RLS_OVERRUN 0x02
	#define RFCOMM_RLS_PARITY 0x04
	#define RFCOMM_RLS_FRAMING 0x08

	/* Multiplexor channel uses DLCI 0 */
	#define RFCOMM_MX_DLCI 0

	/*
	* Define RFCOMM Multiplexer message types
	*/
	#define RFCOMM_MX_PN 0x80
	#define RFCOMM_MX_PN_LEN 8

	#define RFCOMM_MX_CLD 0xC0
	#define RFCOMM_MX_CLD_LEN 0

	#define RFCOMM_MX_TEST 0x20

	#define RFCOMM_MX_FCON 0xA0
	#define RFCOMM_MX_FCON_LEN 0

	#define RFCOMM_MX_FCOFF 0x60
	#define RFCOMM_MX_FCOFF_LEN 0

	#define RFCOMM_MX_MSC 0xE0
	#define RFCOMM_MX_MSC_LEN_NO_BREAK 2
	#define RFCOMM_MX_MSC_LEN_WITH_BREAK 3

	#define RFCOMM_MX_NSC 0x10
	#define RFCOMM_MX_NSC_LEN 1

	#define RFCOMM_MX_RPN 0x90
	#define RFCOMM_MX_RPN_REQ_LEN 1
	#define RFCOMM_MX_RPN_LEN 8

	#define RFCOMM_MX_RLS 0x50
	#define RFCOMM_MX_RLS_LEN 2
	#endif