tools/messagegen/fillsms - LeafOS-Project/android_packages_apps_Messaging - Gitiles

 #!/bin/bash
 #  Copyright (C) 2015 The Android Open Source Project
 #
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 ###################################################################
 ## Script that generates SMS and MMS messages and fills the Android
 ## telephony provider mmssms.db. This is used for testing SMS/MMS.
 ###################################################################

 AREA_CODE=605

 TABLE_CANONICAL_ADDRESSES_START_ID=100
 TABLE_THREADS_START_ID=100
 TABLE_SMS_START_ID=1000

 START_TIMESTAMP_IN_SECONDS=1357683093 # 1/8/2013 2:11:33 PM
 TIMESTAMP_INC_IN_SECONDS=120

 PART_DIR="/data/data/com.android.providers.telephony/app_parts"

 USAGE='fillsms [-f] [-x] <device_phone_number> <# of threads> <# of sms per thread> <# of mms per thread> <image list file> <sql file>
     -f -- Only generates the SQL file, do not push to the device
     -x -- Only execute a SQL file
     -g -- For GB devices
 Examples:
     # Generate 2 threads each with 10 SMSes and 10 MMSes on device with phone
     # number +16508619525. MMS messages use images listed in ./images, which list
     # *.jpg and *.gif files in local directory. The SQL commands are in sql.txt
     fillsms +16508619525 2 10 10 images sql.txt

     # Same as above but only creating the SQL command file without pushing to
     # device
     fillsms -f +16508619525 2 10 10 images sql.txt

     # Just push the sql.txt to device without generating new SQLs
     fillsms -x +16508619525 2 10 10 images sql.txt
 '

 SMIL='<smil> <head> <layout> <root-layout height="%dpx" width="%dpx"> <region fit="meet" height="%dpx" id="Image" left="0" top="0" width="%dpx"/></root-layout> </layout> </head> <body> <par dur="5000ms"> <img region="Image" src="%s"/> </par> </body> </smil>'

 MAX_WORDS_PER_MESSAGE=15

 DICT=american-english

 # don't actually run the sql on device
 opt_sql_only=0
 opt_exec_only=0
 opt_for_gb=0

 while test $# -gt 0
 do
   case $1 in
     -f)
       opt_sql_only=1
       shift
       ;;
     -x)
       opt_exec_only=1
       shift
       ;;
     -g)
       opt_for_gb=1
       shift
       ;;
     *)
       break;
   esac
 done


 if [ $opt_sql_only -eq "1" -a $opt_exec_only -eq "1" ]; then
   echo "-f and -x can not coexist"
   echo "$USAGE"
   exit 1
 fi

 if [ $# -lt 6 ]; then
   echo "$USAGE"
   exit 1
 fi
 device_phone=$1
 shift
 num_of_threads=$1
 shift
 sms_per_thread=$1
 shift
 mms_per_thread=$1
 shift
 image_list_file=$1
 shift
 sql_file=$1
 shift
 echo $image_list_file

 dict_lines=`wc -l < $DICT`
 image_files=`wc -l < $image_list_file`
 echo $image_files

 if [ $mms_per_thread -gt "0" ]; then
   if [ ! -f $image_list_file ]; then
     echo "No image files for creating MMS messages"
     exit 1
   fi
 fi

 echoerr ()
 {
   echo "$@" 1>&2;
 }

 random_value ()
 {
   echo $(( $RANDOM % $1 + 1 ))
 }

 dict_word ()
 {
   local v=$(random_value $dict_lines)
   sed $v"q;d" $DICT
 }

 gen_message ()
 {
   local words=$(random_value $MAX_WORDS_PER_MESSAGE)
   local message=
   for k in `seq 1 $words`;
   do
     local word=$(dict_word)
     message="$message $word"
   done
   echo $message | sed -e "s/'//g"
 }

 random_image ()
 {
   local v=$(random_value $image_files)
   sed $v"q;d" $image_list_file
 }

 add_sql ()
 {
   echo $1 >> $sql_file
 }

 adb_sql ()
 {
   echo $1
   adb shell sqlite3 data/data/com.android.providers.telephony/databases/mmssms.db "$1"
 }

 adb_sql_with_quotes ()
 {
   echo $1
   adb shell "sqlite3 data/data/com.android.providers.telephony/databases/mmssms.db \"$1\""
 }
 ######################################################################################
 ######################################################################################

 if [ $opt_exec_only -eq "0" ]; then
   # clean up sql file
   rm -f $sql_file

   add_sql "PRAGMA trusted_schema=1;"
   # add sql to clean up database
   add_sql "delete from pdu where _id>=$TABLE_SMS_START_ID;"
   add_sql "delete from part where _id>=$TABLE_SMS_START_ID;"
   add_sql "delete from addr where _id>=$TABLE_SMS_START_ID;"
   add_sql "delete from sms where _id>=$TABLE_SMS_START_ID;"
   add_sql "delete from threads where _id>=$TABLE_THREADS_START_ID;"
   add_sql "delete from canonical_addresses where _id>=$TABLE_CANONICAL_ADDRESSES_START_ID;"

   for i in `seq 1 $num_of_threads`;
   do
     echo
     echo "Creating thread $i ......"
     echo

     # Get random phone number
     value=$(random_value 1000)
     middle=$(printf '%03d' $value)
     value=$(random_value 10000)
     last=$(printf '%04d' $value)
     phone="+1$AREA_CODE$middle$last"
     echo $phone
     echo

     timestamp=$(( $START_TIMESTAMP_IN_SECONDS + 5 * $TIMESTAMP_INC_IN_SECONDS * $i ))

     # Generate threads
     addr_id=$(( $TABLE_CANONICAL_ADDRESSES_START_ID + $i ))
     add_sql "insert into canonical_addresses (_id,address) values ($addr_id,'$phone');"

     thread_id=$(( $TABLE_THREADS_START_ID + $i ))
     add_sql "insert into threads (_id,date,message_count,recipient_ids,snippet,snippet_cs,read,type,error,has_attachment) values ($thread_id, $timestamp, $sms_per_thread, $addr_id, 'snippet', 0, 1, 0, 0, 0);"

     # Generate SMS
     if [ $sms_per_thread -gt "0" ]; then
       add_sql "PRAGMA trusted_schema=1;"
       half_timestamp_inc=$(( 500 + ((($sms_per_thread + $mms_per_thread) * $TIMESTAMP_INC_IN_SECONDS) * 500 / $sms_per_thread) ))
       for j in `seq 1 $sms_per_thread`;
       do
         message=$(gen_message)
         date=$(( ( 1000 * $timestamp ) - $half_timestamp_inc * ( 2 * ($sms_per_thread - $j) + ( $i % 2 ) ) ))
         message_id=$(( $TABLE_SMS_START_ID + $sms_per_thread * $i * 2 + (2 * $j) ))
         message_type=$(( $j % 2 + 1 ))
         add_sql "insert into sms (_id,thread_id,address,person,date,status,type,body,read,seen) values ($message_id, $thread_id, '$phone', '$phone', $date, -1, $message_type, '$message', 1, 1);"
       done
     fi

     # Generate MMS
     if [ $mms_per_thread -gt "0" ]; then
       half_timestamp_inc=$(( 1 + ((($sms_per_thread + $mms_per_thread) * $TIMESTAMP_INC_IN_SECONDS) / ( 2 * $mms_per_thread) ) ))
       for j in `seq 1 $mms_per_thread`;
       do
         image_line=$(random_image)
         image=`echo $image_line | awk '{ print $1 }'`
         width=`echo $image_line | awk '{ print $2 }'`
         height=`echo $image_line | awk '{ print $3 }'`
         size=`echo $image_line | awk '{ print $4 }'`
         date=$(( $timestamp - $half_timestamp_inc * ( 2 * ($mms_per_thread - $j) + ( ($i+1) % 2 ) ) ))
         message_id=$(( $TABLE_SMS_START_ID + $sms_per_thread * $i * 2 + (2 * $j + 1) ))
         message_type=$(( $j % 2 + 1 ))
         if [ $message_type -eq '1' ]; then
           m_type=132
         else
           m_type=128
         fi
         if [ $opt_for_gb -eq "0" ]; then
           add_sql "insert into pdu (_id,thread_id,date,date_sent,msg_box,read,m_id,sub,sub_cs,ct_t,m_cls,m_type,v,m_size,pri,rr,tr_id,d_rpt,locked,seen,text_only) values ($message_id, $thread_id, $date, 0, $message_type, 1, 'hmma3p5s1a3m526@w.tmomail.net', 'no subject', 106, 'application/vnd.wap.multipart.related', 'personal', $m_type, 18, $size, 129, 129 , '$message_id', 129, 0, 1, 0);"
         else
           add_sql "insert into pdu (_id,thread_id,date,msg_box,read,m_id,sub,sub_cs,ct_t,m_cls,m_type,v,m_size,pri,rr,tr_id,d_rpt,locked,seen) values ($message_id, $thread_id, $date, $message_type, 1, 'hmma3p5s1a3m526@w.tmomail.net', 'no subject', 106, 'application/vnd.wap.multipart.related', 'personal', $m_type, 18, $size, 129, 129 , '$message_id', 129, 0, 1);"
         fi
         id_1=$(( $message_id ))
         id_2=$(( $message_id + 1 ))
         smil=$(printf "$SMIL" $height $width $height $width $image)
         add_sql "insert into part (_id,mid,seq,ct,cid,cl,text) values ($id_1, $message_id, -1, 'application/smil', '<smil>', 'smil.xml', '$smil');"
         image_no_suffix=${image%.*}
         add_sql "insert into part (_id,mid,seq,ct,cid,cl,_data) values ($id_2, $message_id, 0, 'image/jpeg', '$image_no_suffix', '$image', '$PART_DIR/$image');"
         if [ $message_type -eq '1' ]; then
           add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_1, $message_id, '$phone', 137, 106);"
           add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_2, $message_id, '$device_phone', 151, 106);"
         else
           add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_1, $message_id, 'insert-address-token', 137, 106);"
           add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_2, $message_id, '$phone', 151, 106);"
         fi
       done
     fi
   done
 fi

 # Push to device
 if [ $opt_sql_only -eq "0" ]; then
   # make sure we have access
   adb root

   # Push all local jpgs or gifs to device, being lazy here.
   if [ $mms_per_thread -gt "0" ]; then
     for file in `ls *.jpg *.gif`;
     do
       echo "adb push $file $PART_DIR/$file"
       adb push $file $PART_DIR/$file
     done
   fi

   echo "adb push $sql_file /data/fillsms"
   adb push $sql_file /data/fillsms
   echo
   adb_sql ".read /data/fillsms"
   echo
   add_sql "PRAGMA trusted_schema=1;"
   echo
   adb_sql_with_quotes "select count(*) from canonical_addresses where _id>=$TABLE_CANONICAL_ADDRESSES_START_ID;"
   echo
   adb_sql_with_quotes "select count(*) from threads where _id>=$TABLE_THREADS_START_ID;"
   echo
   if [ $sms_per_thread -gt "0" ]; then
     adb_sql_with_quotes "select count(*) from sms where _id>=$TABLE_SMS_START_ID;"
     echo
   fi
   if [ $mms_per_thread -gt "0" ]; then
     adb_sql_with_quotes "select count(*) from pdu where _id>=$TABLE_SMS_START_ID;"
     echo
     adb_sql_with_quotes "select count(*) from part where _id>=$TABLE_SMS_START_ID;"
     echo
     adb_sql_with_quotes "select count(*) from addr where _id>=$TABLE_SMS_START_ID;"
     echo
   fi
 fi
	#!/bin/bash
	# Copyright (C) 2015 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	###################################################################
	## Script that generates SMS and MMS messages and fills the Android
	## telephony provider mmssms.db. This is used for testing SMS/MMS.
	###################################################################

	AREA_CODE=605

	TABLE_CANONICAL_ADDRESSES_START_ID=100
	TABLE_THREADS_START_ID=100
	TABLE_SMS_START_ID=1000

	START_TIMESTAMP_IN_SECONDS=1357683093 # 1/8/2013 2:11:33 PM
	TIMESTAMP_INC_IN_SECONDS=120

	PART_DIR="/data/data/com.android.providers.telephony/app_parts"

	USAGE='fillsms [-f] [-x] <device_phone_number> <# of threads> <# of sms per thread> <# of mms per thread> <image list file> <sql file>
	-f -- Only generates the SQL file, do not push to the device
	-x -- Only execute a SQL file
	-g -- For GB devices
	Examples:
	# Generate 2 threads each with 10 SMSes and 10 MMSes on device with phone
	# number +16508619525. MMS messages use images listed in ./images, which list
	# .jpg and .gif files in local directory. The SQL commands are in sql.txt
	fillsms +16508619525 2 10 10 images sql.txt

	# Same as above but only creating the SQL command file without pushing to
	# device
	fillsms -f +16508619525 2 10 10 images sql.txt

	# Just push the sql.txt to device without generating new SQLs
	fillsms -x +16508619525 2 10 10 images sql.txt
	'

	SMIL='<smil> <head> <layout> <root-layout height="%dpx" width="%dpx"> <region fit="meet" height="%dpx" id="Image" left="0" top="0" width="%dpx"/></root-layout> </layout> </head> <body> <par dur="5000ms"> <img region="Image" src="%s"/> </par> </body> </smil>'

	MAX_WORDS_PER_MESSAGE=15

	DICT=american-english

	# don't actually run the sql on device
	opt_sql_only=0
	opt_exec_only=0
	opt_for_gb=0

	while test $# -gt 0
	do
	case $1 in
	-f)
	opt_sql_only=1
	shift
	;;
	-x)
	opt_exec_only=1
	shift
	;;
	-g)
	opt_for_gb=1
	shift
	;;
	*)
	break;
	esac
	done


	if [ $opt_sql_only -eq "1" -a $opt_exec_only -eq "1" ]; then
	echo "-f and -x can not coexist"
	echo "$USAGE"
	exit 1
	fi

	if [ $# -lt 6 ]; then
	echo "$USAGE"
	exit 1
	fi
	device_phone=$1
	shift
	num_of_threads=$1
	shift
	sms_per_thread=$1
	shift
	mms_per_thread=$1
	shift
	image_list_file=$1
	shift
	sql_file=$1
	shift
	echo $image_list_file

	dict_lines=`wc -l < $DICT`
	image_files=`wc -l < $image_list_file`
	echo $image_files

	if [ $mms_per_thread -gt "0" ]; then
	if [ ! -f $image_list_file ]; then
	echo "No image files for creating MMS messages"
	exit 1
	fi
	fi

	echoerr ()
	{
	echo "$@" 1>&2;
	}

	random_value ()
	{
	echo $(( $RANDOM % $1 + 1 ))
	}

	dict_word ()
	{
	local v=$(random_value $dict_lines)
	sed $v"q;d" $DICT
	}

	gen_message ()
	{
	local words=$(random_value $MAX_WORDS_PER_MESSAGE)
	local message=
	for k in `seq 1 $words`;
	do
	local word=$(dict_word)
	message="$message $word"
	done
	echo $message \| sed -e "s/'//g"
	}

	random_image ()
	{
	local v=$(random_value $image_files)
	sed $v"q;d" $image_list_file
	}

	add_sql ()
	{
	echo $1 >> $sql_file
	}

	adb_sql ()
	{
	echo $1
	adb shell sqlite3 data/data/com.android.providers.telephony/databases/mmssms.db "$1"
	}

	adb_sql_with_quotes ()
	{
	echo $1
	adb shell "sqlite3 data/data/com.android.providers.telephony/databases/mmssms.db \"$1\""
	}
	######################################################################################
	######################################################################################

	if [ $opt_exec_only -eq "0" ]; then
	# clean up sql file
	rm -f $sql_file

	add_sql "PRAGMA trusted_schema=1;"
	# add sql to clean up database
	add_sql "delete from pdu where _id>=$TABLE_SMS_START_ID;"
	add_sql "delete from part where _id>=$TABLE_SMS_START_ID;"
	add_sql "delete from addr where _id>=$TABLE_SMS_START_ID;"
	add_sql "delete from sms where _id>=$TABLE_SMS_START_ID;"
	add_sql "delete from threads where _id>=$TABLE_THREADS_START_ID;"
	add_sql "delete from canonical_addresses where _id>=$TABLE_CANONICAL_ADDRESSES_START_ID;"

	for i in `seq 1 $num_of_threads`;
	do
	echo
	echo "Creating thread $i ......"
	echo

	# Get random phone number
	value=$(random_value 1000)
	middle=$(printf '%03d' $value)
	value=$(random_value 10000)
	last=$(printf '%04d' $value)
	phone="+1$AREA_CODE$middle$last"
	echo $phone
	echo

	timestamp=$(( $START_TIMESTAMP_IN_SECONDS + 5 * $TIMESTAMP_INC_IN_SECONDS * $i ))

	# Generate threads
	addr_id=$(( $TABLE_CANONICAL_ADDRESSES_START_ID + $i ))
	add_sql "insert into canonical_addresses (_id,address) values ($addr_id,'$phone');"

	thread_id=$(( $TABLE_THREADS_START_ID + $i ))
	add_sql "insert into threads (_id,date,message_count,recipient_ids,snippet,snippet_cs,read,type,error,has_attachment) values ($thread_id, $timestamp, $sms_per_thread, $addr_id, 'snippet', 0, 1, 0, 0, 0);"

	# Generate SMS
	if [ $sms_per_thread -gt "0" ]; then
	add_sql "PRAGMA trusted_schema=1;"
	half_timestamp_inc=$(( 500 + ((($sms_per_thread + $mms_per_thread) * $TIMESTAMP_INC_IN_SECONDS) * 500 / $sms_per_thread) ))
	for j in `seq 1 $sms_per_thread`;
	do
	message=$(gen_message)
	date=$(( ( 1000 * $timestamp ) - $half_timestamp_inc * ( 2 * ($sms_per_thread - $j) + ( $i % 2 ) ) ))
	message_id=$(( $TABLE_SMS_START_ID + $sms_per_thread * $i * 2 + (2 * $j) ))
	message_type=$(( $j % 2 + 1 ))
	add_sql "insert into sms (_id,thread_id,address,person,date,status,type,body,read,seen) values ($message_id, $thread_id, '$phone', '$phone', $date, -1, $message_type, '$message', 1, 1);"
	done
	fi

	# Generate MMS
	if [ $mms_per_thread -gt "0" ]; then
	half_timestamp_inc=$(( 1 + ((($sms_per_thread + $mms_per_thread) * $TIMESTAMP_INC_IN_SECONDS) / ( 2 * $mms_per_thread) ) ))
	for j in `seq 1 $mms_per_thread`;
	do
	image_line=$(random_image)
	image=`echo $image_line \| awk '{ print $1 }'`
	width=`echo $image_line \| awk '{ print $2 }'`
	height=`echo $image_line \| awk '{ print $3 }'`
	size=`echo $image_line \| awk '{ print $4 }'`
	date=$(( $timestamp - $half_timestamp_inc * ( 2 * ($mms_per_thread - $j) + ( ($i+1) % 2 ) ) ))
	message_id=$(( $TABLE_SMS_START_ID + $sms_per_thread * $i * 2 + (2 * $j + 1) ))
	message_type=$(( $j % 2 + 1 ))
	if [ $message_type -eq '1' ]; then
	m_type=132
	else
	m_type=128
	fi
	if [ $opt_for_gb -eq "0" ]; then
	add_sql "insert into pdu (_id,thread_id,date,date_sent,msg_box,read,m_id,sub,sub_cs,ct_t,m_cls,m_type,v,m_size,pri,rr,tr_id,d_rpt,locked,seen,text_only) values ($message_id, $thread_id, $date, 0, $message_type, 1, 'hmma3p5s1a3m526@w.tmomail.net', 'no subject', 106, 'application/vnd.wap.multipart.related', 'personal', $m_type, 18, $size, 129, 129 , '$message_id', 129, 0, 1, 0);"
	else
	add_sql "insert into pdu (_id,thread_id,date,msg_box,read,m_id,sub,sub_cs,ct_t,m_cls,m_type,v,m_size,pri,rr,tr_id,d_rpt,locked,seen) values ($message_id, $thread_id, $date, $message_type, 1, 'hmma3p5s1a3m526@w.tmomail.net', 'no subject', 106, 'application/vnd.wap.multipart.related', 'personal', $m_type, 18, $size, 129, 129 , '$message_id', 129, 0, 1);"
	fi
	id_1=$(( $message_id ))
	id_2=$(( $message_id + 1 ))
	smil=$(printf "$SMIL" $height $width $height $width $image)
	add_sql "insert into part (_id,mid,seq,ct,cid,cl,text) values ($id_1, $message_id, -1, 'application/smil', '<smil>', 'smil.xml', '$smil');"
	image_no_suffix=${image%.*}
	add_sql "insert into part (_id,mid,seq,ct,cid,cl,_data) values ($id_2, $message_id, 0, 'image/jpeg', '$image_no_suffix', '$image', '$PART_DIR/$image');"
	if [ $message_type -eq '1' ]; then
	add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_1, $message_id, '$phone', 137, 106);"
	add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_2, $message_id, '$device_phone', 151, 106);"
	else
	add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_1, $message_id, 'insert-address-token', 137, 106);"
	add_sql "insert into addr (_id,msg_id,address,type,charset) values ($id_2, $message_id, '$phone', 151, 106);"
	fi
	done
	fi
	done
	fi

	# Push to device
	if [ $opt_sql_only -eq "0" ]; then
	# make sure we have access
	adb root

	# Push all local jpgs or gifs to device, being lazy here.
	if [ $mms_per_thread -gt "0" ]; then
	for file in `ls .jpg .gif`;
	do
	echo "adb push $file $PART_DIR/$file"
	adb push $file $PART_DIR/$file
	done
	fi

	echo "adb push $sql_file /data/fillsms"
	adb push $sql_file /data/fillsms
	echo
	adb_sql ".read /data/fillsms"
	echo
	add_sql "PRAGMA trusted_schema=1;"
	echo
	adb_sql_with_quotes "select count(*) from canonical_addresses where _id>=$TABLE_CANONICAL_ADDRESSES_START_ID;"
	echo
	adb_sql_with_quotes "select count(*) from threads where _id>=$TABLE_THREADS_START_ID;"
	echo
	if [ $sms_per_thread -gt "0" ]; then
	adb_sql_with_quotes "select count(*) from sms where _id>=$TABLE_SMS_START_ID;"
	echo
	fi
	if [ $mms_per_thread -gt "0" ]; then
	adb_sql_with_quotes "select count(*) from pdu where _id>=$TABLE_SMS_START_ID;"
	echo
	adb_sql_with_quotes "select count(*) from part where _id>=$TABLE_SMS_START_ID;"
	echo
	adb_sql_with_quotes "select count(*) from addr where _id>=$TABLE_SMS_START_ID;"
	echo
	fi
	fi