src/com/android/gallery3d/glrenderer/GLCanvas.java - LeafOS-Project/android_packages_apps_Gallery2 - Gitiles

 /*
  * Copyright (C) 2010 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 package com.android.gallery3d.glrenderer;

 import android.graphics.Bitmap;
 import android.graphics.Rect;
 import android.graphics.RectF;

 import javax.microedition.khronos.opengles.GL11;

 //
 // GLCanvas gives a convenient interface to draw using OpenGL.
 //
 // When a rectangle is specified in this interface, it means the region
 // [x, x+width) * [y, y+height)
 //
 public interface GLCanvas {

     public GLId getGLId();

     // Tells GLCanvas the size of the underlying GL surface. This should be
     // called before first drawing and when the size of GL surface is changed.
     // This is called by GLRoot and should not be called by the clients
     // who only want to draw on the GLCanvas. Both width and height must be
     // nonnegative.
     public abstract void setSize(int width, int height);

     // Clear the drawing buffers. This should only be used by GLRoot.
     public abstract void clearBuffer();

     public abstract void clearBuffer(float[] argb);

     // Sets and gets the current alpha, alpha must be in [0, 1].
     public abstract void setAlpha(float alpha);

     public abstract float getAlpha();

     // (current alpha) = (current alpha) * alpha
     public abstract void multiplyAlpha(float alpha);

     // Change the current transform matrix.
     public abstract void translate(float x, float y, float z);

     public abstract void translate(float x, float y);

     public abstract void scale(float sx, float sy, float sz);

     public abstract void rotate(float angle, float x, float y, float z);

     public abstract void multiplyMatrix(float[] mMatrix, int offset);

     // Pushes the configuration state (matrix, and alpha) onto
     // a private stack.
     public abstract void save();

     // Same as save(), but only save those specified in saveFlags.
     public abstract void save(int saveFlags);

     public static final int SAVE_FLAG_ALL = 0xFFFFFFFF;
     public static final int SAVE_FLAG_ALPHA = 0x01;
     public static final int SAVE_FLAG_MATRIX = 0x02;

     // Pops from the top of the stack as current configuration state (matrix,
     // alpha, and clip). This call balances a previous call to save(), and is
     // used to remove all modifications to the configuration state since the
     // last save call.
     public abstract void restore();

     // Draws a line using the specified paint from (x1, y1) to (x2, y2).
     // (Both end points are included).
     public abstract void drawLine(float x1, float y1, float x2, float y2, GLPaint paint);

     // Draws a rectangle using the specified paint from (x1, y1) to (x2, y2).
     // (Both end points are included).
     public abstract void drawRect(float x1, float y1, float x2, float y2, GLPaint paint);

     // Fills the specified rectangle with the specified color.
     public abstract void fillRect(float x, float y, float width, float height, int color);

     // Draws a texture to the specified rectangle.
     public abstract void drawTexture(
             BasicTexture texture, int x, int y, int width, int height);

     public abstract void drawMesh(BasicTexture tex, int x, int y, int xyBuffer,
             int uvBuffer, int indexBuffer, int indexCount);

     // Draws the source rectangle part of the texture to the target rectangle.
     public abstract void drawTexture(BasicTexture texture, RectF source, RectF target);

     // Draw a texture with a specified texture transform.
     public abstract void drawTexture(BasicTexture texture, float[] mTextureTransform,
                 int x, int y, int w, int h);

     // Draw two textures to the specified rectangle. The actual texture used is
     // from * (1 - ratio) + to * ratio
     // The two textures must have the same size.
     public abstract void drawMixed(BasicTexture from, int toColor,
             float ratio, int x, int y, int w, int h);

     // Draw a region of a texture and a specified color to the specified
     // rectangle. The actual color used is from * (1 - ratio) + to * ratio.
     // The region of the texture is defined by parameter "src". The target
     // rectangle is specified by parameter "target".
     public abstract void drawMixed(BasicTexture from, int toColor,
             float ratio, RectF src, RectF target);

     // Unloads the specified texture from the canvas. The resource allocated
     // to draw the texture will be released. The specified texture will return
     // to the unloaded state. This function should be called only from
     // BasicTexture or its descendant
     public abstract boolean unloadTexture(BasicTexture texture);

     // Delete the specified buffer object, similar to unloadTexture.
     public abstract void deleteBuffer(int bufferId);

     // Delete the textures and buffers in GL side. This function should only be
     // called in the GL thread.
     public abstract void deleteRecycledResources();

     // Dump statistics information and clear the counters. For debug only.
     public abstract void dumpStatisticsAndClear();

     public abstract void beginRenderTarget(RawTexture texture);

     public abstract void endRenderTarget();

     /**
      * Sets texture parameters to use GL_CLAMP_TO_EDGE for both
      * GL_TEXTURE_WRAP_S and GL_TEXTURE_WRAP_T. Sets texture parameters to be
      * GL_LINEAR for GL_TEXTURE_MIN_FILTER and GL_TEXTURE_MAG_FILTER.
      * bindTexture() must be called prior to this.
      *
      * @param texture The texture to set parameters on.
      */
     public abstract void setTextureParameters(BasicTexture texture);

     /**
      * Initializes the texture to a size by calling texImage2D on it.
      *
      * @param texture The texture to initialize the size.
      * @param format The texture format (e.g. GL_RGBA)
      * @param type The texture type (e.g. GL_UNSIGNED_BYTE)
      */
     public abstract void initializeTextureSize(BasicTexture texture, int format, int type);

     /**
      * Initializes the texture to a size by calling texImage2D on it.
      *
      * @param texture The texture to initialize the size.
      * @param bitmap The bitmap to initialize the bitmap with.
      */
     public abstract void initializeTexture(BasicTexture texture, Bitmap bitmap);

     /**
      * Calls glTexSubImage2D to upload a bitmap to the texture.
      *
      * @param texture The target texture to write to.
      * @param xOffset Specifies a texel offset in the x direction within the
      *            texture array.
      * @param yOffset Specifies a texel offset in the y direction within the
      *            texture array.
      * @param format The texture format (e.g. GL_RGBA)
      * @param type The texture type (e.g. GL_UNSIGNED_BYTE)
      */
     public abstract void texSubImage2D(BasicTexture texture, int xOffset, int yOffset,
             Bitmap bitmap,
             int format, int type);

     /**
      * Generates buffers and uploads the buffer data.
      *
      * @param buffer The buffer to upload
      * @return The buffer ID that was generated.
      */
     public abstract int uploadBuffer(java.nio.FloatBuffer buffer);

     /**
      * Generates buffers and uploads the element array buffer data.
      *
      * @param buffer The buffer to upload
      * @return The buffer ID that was generated.
      */
     public abstract int uploadBuffer(java.nio.ByteBuffer buffer);

     /**
      * After LightCycle makes GL calls, this method is called to restore the GL
      * configuration to the one expected by GLCanvas.
      */
     public abstract void recoverFromLightCycle();

     /**
      * Gets the bounds given by x, y, width, and height as well as the internal
      * matrix state. There is no special handling for non-90-degree rotations.
      * It only considers the lower-left and upper-right corners as the bounds.
      *
      * @param bounds The output bounds to write to.
      * @param x The left side of the input rectangle.
      * @param y The bottom of the input rectangle.
      * @param width The width of the input rectangle.
      * @param height The height of the input rectangle.
      */
     public abstract void getBounds(Rect bounds, int x, int y, int width, int height);
 }
	/*
	* Copyright (C) 2010 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	package com.android.gallery3d.glrenderer;

	import android.graphics.Bitmap;
	import android.graphics.Rect;
	import android.graphics.RectF;

	import javax.microedition.khronos.opengles.GL11;

	//
	// GLCanvas gives a convenient interface to draw using OpenGL.
	//
	// When a rectangle is specified in this interface, it means the region
	// [x, x+width) * [y, y+height)
	//
	public interface GLCanvas {

	public GLId getGLId();

	// Tells GLCanvas the size of the underlying GL surface. This should be
	// called before first drawing and when the size of GL surface is changed.
	// This is called by GLRoot and should not be called by the clients
	// who only want to draw on the GLCanvas. Both width and height must be
	// nonnegative.
	public abstract void setSize(int width, int height);

	// Clear the drawing buffers. This should only be used by GLRoot.
	public abstract void clearBuffer();

	public abstract void clearBuffer(float[] argb);

	// Sets and gets the current alpha, alpha must be in [0, 1].
	public abstract void setAlpha(float alpha);

	public abstract float getAlpha();

	// (current alpha) = (current alpha) * alpha
	public abstract void multiplyAlpha(float alpha);

	// Change the current transform matrix.
	public abstract void translate(float x, float y, float z);

	public abstract void translate(float x, float y);

	public abstract void scale(float sx, float sy, float sz);

	public abstract void rotate(float angle, float x, float y, float z);

	public abstract void multiplyMatrix(float[] mMatrix, int offset);

	// Pushes the configuration state (matrix, and alpha) onto
	// a private stack.
	public abstract void save();

	// Same as save(), but only save those specified in saveFlags.
	public abstract void save(int saveFlags);

	public static final int SAVE_FLAG_ALL = 0xFFFFFFFF;
	public static final int SAVE_FLAG_ALPHA = 0x01;
	public static final int SAVE_FLAG_MATRIX = 0x02;

	// Pops from the top of the stack as current configuration state (matrix,
	// alpha, and clip). This call balances a previous call to save(), and is
	// used to remove all modifications to the configuration state since the
	// last save call.
	public abstract void restore();

	// Draws a line using the specified paint from (x1, y1) to (x2, y2).
	// (Both end points are included).
	public abstract void drawLine(float x1, float y1, float x2, float y2, GLPaint paint);

	// Draws a rectangle using the specified paint from (x1, y1) to (x2, y2).
	// (Both end points are included).
	public abstract void drawRect(float x1, float y1, float x2, float y2, GLPaint paint);

	// Fills the specified rectangle with the specified color.
	public abstract void fillRect(float x, float y, float width, float height, int color);

	// Draws a texture to the specified rectangle.
	public abstract void drawTexture(
	BasicTexture texture, int x, int y, int width, int height);

	public abstract void drawMesh(BasicTexture tex, int x, int y, int xyBuffer,
	int uvBuffer, int indexBuffer, int indexCount);

	// Draws the source rectangle part of the texture to the target rectangle.
	public abstract void drawTexture(BasicTexture texture, RectF source, RectF target);

	// Draw a texture with a specified texture transform.
	public abstract void drawTexture(BasicTexture texture, float[] mTextureTransform,
	int x, int y, int w, int h);

	// Draw two textures to the specified rectangle. The actual texture used is
	// from * (1 - ratio) + to * ratio
	// The two textures must have the same size.
	public abstract void drawMixed(BasicTexture from, int toColor,
	float ratio, int x, int y, int w, int h);

	// Draw a region of a texture and a specified color to the specified
	// rectangle. The actual color used is from * (1 - ratio) + to * ratio.
	// The region of the texture is defined by parameter "src". The target
	// rectangle is specified by parameter "target".
	public abstract void drawMixed(BasicTexture from, int toColor,
	float ratio, RectF src, RectF target);

	// Unloads the specified texture from the canvas. The resource allocated
	// to draw the texture will be released. The specified texture will return
	// to the unloaded state. This function should be called only from
	// BasicTexture or its descendant
	public abstract boolean unloadTexture(BasicTexture texture);

	// Delete the specified buffer object, similar to unloadTexture.
	public abstract void deleteBuffer(int bufferId);

	// Delete the textures and buffers in GL side. This function should only be
	// called in the GL thread.
	public abstract void deleteRecycledResources();

	// Dump statistics information and clear the counters. For debug only.
	public abstract void dumpStatisticsAndClear();

	public abstract void beginRenderTarget(RawTexture texture);

	public abstract void endRenderTarget();

	/**
	* Sets texture parameters to use GL_CLAMP_TO_EDGE for both
	* GL_TEXTURE_WRAP_S and GL_TEXTURE_WRAP_T. Sets texture parameters to be
	* GL_LINEAR for GL_TEXTURE_MIN_FILTER and GL_TEXTURE_MAG_FILTER.
	* bindTexture() must be called prior to this.
	*
	* @param texture The texture to set parameters on.
	*/
	public abstract void setTextureParameters(BasicTexture texture);

	/**
	* Initializes the texture to a size by calling texImage2D on it.
	*
	* @param texture The texture to initialize the size.
	* @param format The texture format (e.g. GL_RGBA)
	* @param type The texture type (e.g. GL_UNSIGNED_BYTE)
	*/
	public abstract void initializeTextureSize(BasicTexture texture, int format, int type);

	/**
	* Initializes the texture to a size by calling texImage2D on it.
	*
	* @param texture The texture to initialize the size.
	* @param bitmap The bitmap to initialize the bitmap with.
	*/
	public abstract void initializeTexture(BasicTexture texture, Bitmap bitmap);

	/**
	* Calls glTexSubImage2D to upload a bitmap to the texture.
	*
	* @param texture The target texture to write to.
	* @param xOffset Specifies a texel offset in the x direction within the
	* texture array.
	* @param yOffset Specifies a texel offset in the y direction within the
	* texture array.
	* @param format The texture format (e.g. GL_RGBA)
	* @param type The texture type (e.g. GL_UNSIGNED_BYTE)
	*/
	public abstract void texSubImage2D(BasicTexture texture, int xOffset, int yOffset,
	Bitmap bitmap,
	int format, int type);

	/**
	* Generates buffers and uploads the buffer data.
	*
	* @param buffer The buffer to upload
	* @return The buffer ID that was generated.
	*/
	public abstract int uploadBuffer(java.nio.FloatBuffer buffer);

	/**
	* Generates buffers and uploads the element array buffer data.
	*
	* @param buffer The buffer to upload
	* @return The buffer ID that was generated.
	*/
	public abstract int uploadBuffer(java.nio.ByteBuffer buffer);

	/**
	* After LightCycle makes GL calls, this method is called to restore the GL
	* configuration to the one expected by GLCanvas.
	*/
	public abstract void recoverFromLightCycle();

	/**
	* Gets the bounds given by x, y, width, and height as well as the internal
	* matrix state. There is no special handling for non-90-degree rotations.
	* It only considers the lower-left and upper-right corners as the bounds.
	*
	* @param bounds The output bounds to write to.
	* @param x The left side of the input rectangle.
	* @param y The bottom of the input rectangle.
	* @param width The width of the input rectangle.
	* @param height The height of the input rectangle.
	*/
	public abstract void getBounds(Rect bounds, int x, int y, int width, int height);
	}