| /*-------------------------------------------------------------------------- |
| Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| * Neither the name of The Linux Foundation nor |
| the names of its contributors may be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
| ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| --------------------------------------------------------------------------*/ |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| #include <dirent.h> |
| #include <ctype.h> |
| #include <grp.h> |
| #include <utime.h> |
| #include <sys/stat.h> |
| #include <sys/sendfile.h> |
| #include <unistd.h> |
| #define LOG_TAG "wcnss_service" |
| #include <cutils/log.h> |
| #include <cutils/properties.h> |
| #ifdef WCNSS_QMI |
| #include "wcnss_qmi_client.h" |
| #ifdef MDM_DETECT |
| #include "mdm_detect.h" |
| #endif |
| #endif |
| #ifdef WCNSS_QMI_OSS |
| #include <dlfcn.h> |
| #endif |
| |
| #define SUCCESS 0 |
| #define FAILED -1 |
| #define BYTE_0 0 |
| #define BYTE_1 8 |
| #define BYTE_2 16 |
| #define BYTE_3 24 |
| #define UNUSED(x) (void)(x) |
| |
| #define MAX_FILE_LENGTH (1024) |
| #define WCNSS_MAX_CMD_LEN (128) |
| |
| /* control messages to wcnss driver */ |
| #define WCNSS_USR_CTRL_MSG_START 0x00000000 |
| #define WCNSS_USR_SERIAL_NUM (WCNSS_USR_CTRL_MSG_START + 1) |
| #define WCNSS_USR_HAS_CAL_DATA (WCNSS_USR_CTRL_MSG_START + 2) |
| #define WCNSS_USR_WLAN_MAC_ADDR (WCNSS_USR_CTRL_MSG_START + 3) |
| |
| |
| #define WCNSS_CAL_CHUNK (3*1024) |
| #define WCNSS_CAL_FILE "/data/vendor/wifi/WCNSS_qcom_wlan_cal.bin" |
| #define WCNSS_FACT_FILE "/data/vendor/wifi/WCN_FACTORY" |
| #define WCNSS_DEVICE "/dev/wcnss_wlan" |
| #define WCNSS_CTRL "/dev/wcnss_ctrl" |
| #define WLAN_INI_FILE_DEST "/data/vendor/wifi/WCNSS_qcom_cfg.ini" |
| #define WLAN_INI_FILE_SOURCE "/vendor/etc/wifi/WCNSS_qcom_cfg.ini" |
| #define WCNSS_HAS_CAL_DATA\ |
| "/sys/module/wcnsscore/parameters/has_calibrated_data" |
| |
| #define ASCII_A 65 |
| #define ASCII_a 97 |
| #define ASCII_0 48 |
| #define HEXA_A 10 |
| #define HEX_BASE 16 |
| |
| #if defined (WCNSS_QMI) || defined(WCNSS_QMI_OSS) |
| #define WLAN_ADDR_SIZE 6 |
| unsigned char wlan_nv_mac_addr[WLAN_ADDR_SIZE]; |
| #ifdef WCNSS_QMI_MAC_ADDR_REV |
| #define MAC_ADDR_ARRAY(a) (a)[5], (a)[4], (a)[3], (a)[2], (a)[1], (a)[0] |
| #else |
| #define MAC_ADDR_ARRAY(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] |
| #endif |
| #define MAC_ADDRESS_STR "%02x:%02x:%02x:%02x:%02x:%02x" |
| |
| /* As we Want to write in 00:0a:f5:11:22:33 format in sysfs file |
| so taking mac length as 12 char + 5 for ":" + NULL |
| */ |
| #define WLAN_MAC_ADDR_STRING 18 |
| #endif |
| |
| #define MAX_SOC_INFO_NAME_LEN (15) |
| #define MAX_DATA_NVBIN_PATH_LEN (64) |
| #define QRD_DYNAMIC_NV_PROP "persist.sys.dynamic.nv" |
| #define QRD_HW_PLATFORM "QRD" |
| #define QRD_PLATFORM_SUBTYPE_ID 0 |
| #define PERSIST_NVFILE "/persist/WCNSS_qcom_wlan_nv.bin" |
| #define DATA_NVFILE_DIR "/data/misc/wifi/nvbin/" |
| #define SYSFS_SOCID_PATH1 "/sys/devices/soc0/soc_id" |
| #define SYSFS_SOCID_PATH2 "/sys/devices/system/soc/soc0/id" |
| #define SYSFS_HW_PLATFORM_PATH1 "/sys/devices/soc0/hw_platform" |
| #define SYSFS_HW_PLATFORM_PATH2 "/sys/devices/system/soc/soc0/hw_platform" |
| #define SYSFS_PLATFORM_SUBTYPE_PATH1 "/sys/devices/soc0/platform_subtype_id" |
| #define SYSFS_PLATFORM_SUBTYPE_PATH2 "/sys/devices/system/soc/soc0/platform_subtype_id" |
| #define SYSFS_PLATFORM_VERSION_PATH1 "/sys/devices/soc0/platform_version" |
| #define SYSFS_PLATFORM_VERSION_PATH2 "/sys/devices/system/soc/soc0/platform_version" |
| #define SOCINFO_HWVER_MAJOR(ver) (((ver) & 0x00ff0000) >> 16) |
| #define SOCINFO_HWVER_MINOR(ver) ((ver) & 0x000000ff) |
| #define GET_SOC_INFO(buf, soc_node_path1, soc_node_path2, info_got) \ |
| { if (get_soc_info(buf, soc_node_path1, soc_node_path2) < 0) \ |
| { \ |
| ALOGE("get_soc_info failed!\n"); \ |
| return FAILED; \ |
| } \ |
| info_got = atoi(buf); \ |
| } |
| |
| int wcnss_write_cal_data(int fd_dev) |
| { |
| int rcount = 0; |
| int size = 0; |
| int rc = 0; |
| int wcount = 0; |
| int fd_file; |
| struct stat st; |
| |
| char buf[WCNSS_CAL_CHUNK]; |
| |
| ALOGI("wcnss_write_cal_data trying to write cal"); |
| |
| rc = stat(WCNSS_CAL_FILE, &st); |
| if (rc < 0) { |
| ALOGE("Failed to stat cal file : %s", |
| strerror(errno)); |
| goto exit; |
| } |
| |
| size = st.st_size; |
| |
| fd_file = open(WCNSS_CAL_FILE, O_RDONLY); |
| if (fd_file < 0) { |
| ALOGE("cal file doesn't exist: %s", |
| strerror(errno)); |
| rc = fd_file; |
| goto exit; |
| } |
| |
| /* write the file size first, so that platform driver knows |
| * when it recieves the full data */ |
| wcount = write(fd_dev, (void *)&size, 4); |
| if (wcount != 4) { |
| ALOGE("Failed to write to wcnss device : %s", |
| strerror(errno)); |
| rc = wcount; |
| goto exit_close; |
| } |
| |
| do { |
| rcount = read(fd_file, (void *)buf, sizeof(buf)); |
| if (rcount < 0) { |
| ALOGE("Failed to read from cal file ; %s", |
| strerror(errno)); |
| rc = rcount; |
| goto exit_remove; |
| } |
| |
| if (!rcount) |
| break; |
| |
| wcount = write(fd_dev, buf, rcount); |
| if (wcount < 0) { |
| ALOGE("Failed to write to wcnss device : %s", |
| strerror(errno)); |
| rc = wcount; |
| goto exit_close; |
| } |
| |
| } while (rcount); |
| close(fd_file); |
| |
| return SUCCESS; |
| |
| exit_remove: |
| close(fd_file); |
| remove("WCNSS_CAL_FILE"); |
| return rc; |
| |
| exit_close: |
| close(fd_file); |
| |
| exit: |
| return rc; |
| } |
| |
| |
| int wcnss_read_and_store_cal_data(int fd_dev) |
| { |
| int rcount = 0; |
| int wcount = 0; |
| int fd_file = -1; |
| int rc = 0; |
| |
| char buf[WCNSS_CAL_CHUNK]; |
| |
| ALOGI("wcnss_read_and_store_cal_data trying to read cal"); |
| |
| do { |
| /* wait on this read until data comes from fw */ |
| rcount = read(fd_dev, (void *)buf, sizeof(buf)); |
| if (rcount < 0) { |
| ALOGE("Failed to read from wcnss device : %s", |
| strerror(errno)); |
| rc = rcount; |
| goto exit; |
| } |
| |
| /* truncate the file only if there is fw data, this read |
| * may never return if the fw decides that no more cal is |
| * required; and the data we have now is good enough. |
| */ |
| if (fd_file < 0) { |
| fd_file = open(WCNSS_CAL_FILE, O_WRONLY |
| | O_CREAT | O_TRUNC, 0664); |
| if (fd_file < 0) { |
| ALOGE("Failed to open cal file : %s", |
| strerror(errno)); |
| rc = fd_file; |
| goto exit; |
| } |
| } |
| |
| if (!rcount) |
| break; |
| |
| wcount = write(fd_file, buf, rcount); |
| if (wcount < 0) { |
| ALOGE("Failed to write to cal file : %s", |
| strerror(errno)); |
| rc = wcount; |
| goto exit_remove; |
| } |
| |
| } while (rcount); |
| |
| close(fd_file); |
| |
| return SUCCESS; |
| |
| exit_remove: |
| close(fd_file); |
| remove(WCNSS_CAL_FILE); |
| |
| exit: |
| return rc; |
| } |
| |
| |
| void find_full_path(char *cur_dir, char *file_to_find, char *full_path) |
| { |
| DIR *dir; |
| struct stat st; |
| struct dirent *dr; |
| char cwd[1024]; |
| int rc; |
| |
| chdir(cur_dir); |
| |
| dir = opendir("."); |
| |
| if (dir != NULL) { |
| while ((dr = readdir(dir))) { |
| |
| rc = lstat(dr->d_name, &st); |
| if (rc < 0) { |
| ALOGE("lstat failed %s", strerror(errno)); |
| return; |
| } |
| if (S_ISDIR(st.st_mode)) { |
| if ((strcmp(dr->d_name, ".")) && |
| (strcmp(dr->d_name, ".."))) { |
| find_full_path(dr->d_name, |
| file_to_find, full_path); |
| } |
| } else if (!strcmp(file_to_find, dr->d_name)) { |
| getcwd(cwd, sizeof(cwd)); |
| snprintf(full_path, MAX_FILE_LENGTH, "%s/%s", |
| cwd, file_to_find); |
| } |
| } |
| closedir(dir); |
| } |
| |
| chdir(".."); |
| } |
| |
| void setup_wlan_config_file() |
| { |
| int rfd; |
| int wfd; |
| struct stat st_dest, st_src; |
| int rc_dest; |
| int rc; |
| struct group *grp; |
| struct utimbuf new_time; |
| |
| rc = stat(WLAN_INI_FILE_SOURCE, &st_src); |
| if (rc != 0) { |
| ALOGE("source file do not exist %s", WLAN_INI_FILE_SOURCE); |
| return; |
| } |
| |
| rc_dest = stat(WLAN_INI_FILE_DEST, &st_dest); |
| if (rc_dest == 0 && st_dest.st_size && |
| (st_dest.st_mtime > st_src.st_mtime)) { |
| ALOGE("wlan ini file exists %s and is newer than %s", |
| WLAN_INI_FILE_DEST, WLAN_INI_FILE_SOURCE); |
| goto out_nocopy; |
| } |
| |
| rfd = open(WLAN_INI_FILE_SOURCE, O_RDONLY); |
| if (rfd < 0) { |
| ALOGE("Failed to open ini source file: %s", strerror(errno)); |
| return; |
| } |
| |
| wfd = open(WLAN_INI_FILE_DEST, O_WRONLY | O_CREAT | O_TRUNC, 0660); |
| if (wfd < 0) { |
| ALOGE("Failed to open ini dest file: %s", strerror(errno)); |
| close(rfd); |
| return; |
| } |
| |
| rc = sendfile(wfd, rfd, 0, st_src.st_size); |
| if (rc != st_src.st_size) { |
| ALOGE("Failed to copy ini file: %s", strerror(errno)); |
| goto out; |
| } |
| |
| new_time.actime = st_src.st_atime; |
| new_time.modtime = st_src.st_mtime; |
| |
| rc = utime(WLAN_INI_FILE_DEST, &new_time); |
| if (rc != 0) |
| ALOGE("could not preserve the timestamp %s", strerror(errno)); |
| |
| grp = getgrnam("wifi"); |
| if (grp != NULL) { |
| rc = chown(WLAN_INI_FILE_DEST, -1, grp->gr_gid); |
| if (rc != 0) |
| ALOGE("Failed change group of ini file %s", strerror(errno)); |
| } else { |
| ALOGE("Failed to get group wifi %s", strerror(errno)); |
| } |
| |
| property_set("vendor.wlan.driver.config", WLAN_INI_FILE_DEST); |
| |
| out: |
| close(rfd); |
| close(wfd); |
| return; |
| |
| out_nocopy: |
| property_set("vendor.wlan.driver.config", WLAN_INI_FILE_DEST); |
| return; |
| } |
| unsigned int convert_string_to_hex(char* string) |
| { |
| int idx; |
| unsigned long int hex_num = 0; |
| for(idx = 0; string[idx] != '\0'; idx++){ |
| if(isalpha(string[idx])) { |
| if(string[idx] >='a' && string[idx] <='f') { |
| hex_num = hex_num * HEX_BASE + ((int)string[idx] |
| - ASCII_a + HEXA_A); |
| } else if ( string[idx] >='A' && string[idx] <='F') { |
| hex_num = hex_num * HEX_BASE + ((int)string[idx] |
| - ASCII_A + HEXA_A); |
| } else |
| hex_num = hex_num * HEX_BASE + (int)string[idx]; |
| } else { |
| hex_num = hex_num * HEX_BASE + (string[idx]- ASCII_0); |
| } |
| } |
| hex_num = hex_num & 0xFFFFFFFF; |
| return hex_num; |
| } |
| |
| |
| #if defined(WCNSS_QMI) || defined(WCNSS_QMI_OSS) |
| void setup_wcnss_parameters(int *cal, int nv_mac_addr) |
| #else |
| void setup_wcnss_parameters(int *cal) |
| #endif |
| { |
| char msg[WCNSS_MAX_CMD_LEN]; |
| int fd, rc, pos = 0; |
| struct stat st; |
| |
| fd = open(WCNSS_CTRL, O_WRONLY); |
| if (fd < 0) { |
| ALOGE("Failed to open %s : %s", WCNSS_CTRL, strerror(errno)); |
| return; |
| } |
| |
| #if defined(WCNSS_QMI) || defined (WCNSS_QMI_OSS) |
| if (SUCCESS == nv_mac_addr) |
| { |
| pos = 0; |
| msg[pos++] = WCNSS_USR_WLAN_MAC_ADDR >> BYTE_1; |
| msg[pos++] = WCNSS_USR_WLAN_MAC_ADDR >> BYTE_0; |
| #ifdef WCNSS_QMI_MAC_ADDR_REV |
| msg[pos++] = wlan_nv_mac_addr[5]; |
| msg[pos++] = wlan_nv_mac_addr[4]; |
| msg[pos++] = wlan_nv_mac_addr[3]; |
| msg[pos++] = wlan_nv_mac_addr[2]; |
| msg[pos++] = wlan_nv_mac_addr[1]; |
| msg[pos++] = wlan_nv_mac_addr[0]; |
| #else |
| msg[pos++] = wlan_nv_mac_addr[0]; |
| msg[pos++] = wlan_nv_mac_addr[1]; |
| msg[pos++] = wlan_nv_mac_addr[2]; |
| msg[pos++] = wlan_nv_mac_addr[3]; |
| msg[pos++] = wlan_nv_mac_addr[4]; |
| msg[pos++] = wlan_nv_mac_addr[5]; |
| #endif |
| |
| ALOGI("WLAN MAC Addr:" MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wlan_nv_mac_addr)); |
| |
| if (write(fd, msg, pos) < 0) { |
| ALOGE("Failed to write to %s : %s", WCNSS_CTRL, |
| strerror(errno)); |
| goto fail; |
| } |
| } |
| #endif |
| |
| pos = 0; |
| msg[pos++] = WCNSS_USR_HAS_CAL_DATA >> BYTE_1; |
| msg[pos++] = WCNSS_USR_HAS_CAL_DATA >> BYTE_0; |
| |
| rc = stat(WCNSS_FACT_FILE, &st); |
| if (rc == 0) { |
| ALOGE("Factory file found, deleting cal file"); |
| unlink(WCNSS_CAL_FILE); |
| goto fail_resp; |
| } |
| |
| rc = stat(WCNSS_CAL_FILE, &st); |
| if (rc != 0) { |
| ALOGE("CAL file not found"); |
| goto fail_resp; |
| } |
| |
| /* has cal data */ |
| msg[pos++] = 1; |
| |
| if (write(fd, msg, pos) < 0) { |
| ALOGE("Failed to write to %s : %s", WCNSS_CTRL, |
| strerror(errno)); |
| goto fail; |
| } |
| |
| ALOGI("Correctly triggered cal file"); |
| *cal = SUCCESS; |
| close(fd); |
| return; |
| |
| fail_resp: |
| msg[pos++] = 0; |
| if (write(fd, msg, pos) < 0) |
| ALOGE("Failed to write to %s : %s", WCNSS_CTRL, |
| strerror(errno)); |
| |
| fail: |
| *cal = FAILED; |
| close(fd); |
| return; |
| } |
| |
| #ifdef MDM_DETECT |
| int check_modem_compatability(struct dev_info *mdm_detect_info) |
| { |
| char args[MODEM_BASEBAND_PROPERTY_SIZE] = {0}; |
| int ret = 0; |
| /* Get the hardware property */ |
| ret = property_get(MODEM_BASEBAND_PROPERTY, args, ""); |
| if (ret > MODEM_BASEBAND_PROPERTY_SIZE) { |
| ALOGE("property [%s] has size [%d] that exceeds max [%d]", |
| MODEM_BASEBAND_PROPERTY, ret, MODEM_BASEBAND_PROPERTY_SIZE); |
| return 0; |
| } |
| /* This will check for the type of hardware, and if the |
| hardware type needs external modem, it will check if the |
| modem type is external*/ |
| if(!strncmp(MODEM_BASEBAND_VALUE_APQ, args, 3)) { |
| |
| for (ret = 0; ret < mdm_detect_info->num_modems; ret++) { |
| if (mdm_detect_info->mdm_list[ret].type == MDM_TYPE_EXTERNAL) { |
| ALOGE("Hardware supports external modem"); |
| return 1; |
| } |
| } |
| ALOGE("Hardware does not support external modem"); |
| return 0; |
| } |
| return 1; |
| } |
| #endif |
| |
| static int read_line_from_file(const char *path, char *buf, size_t count) |
| { |
| char * fgets_ret; |
| FILE * fd; |
| int rv; |
| |
| fd = fopen(path, "r"); |
| if (fd == NULL) |
| return -1; |
| |
| fgets_ret = fgets(buf, (int)count, fd); |
| if (NULL != fgets_ret) { |
| rv = (int)strlen(buf); |
| } else { |
| rv = ferror(fd); |
| } |
| |
| fclose(fd); |
| |
| return rv; |
| } |
| |
| static int get_soc_info(char *buf, char *soc_node_path1, |
| char *soc_node_path2) |
| { |
| int ret = 0; |
| |
| ret = read_line_from_file(soc_node_path1, buf, |
| MAX_SOC_INFO_NAME_LEN); |
| if (ret < 0) { |
| ret = read_line_from_file(soc_node_path2, buf, |
| MAX_SOC_INFO_NAME_LEN); |
| if (ret < 0) { |
| ALOGE("getting socinfo(%s, %d) failed.\n", |
| soc_node_path1, ret); |
| return ret; |
| } |
| } |
| if (ret && buf[ret - 1] == '\n') |
| buf[ret - 1] = '\0'; |
| |
| return ret; |
| } |
| |
| static int get_data_nvfile_path(char *data_nvfile_path, |
| struct stat *pdata_nvfile_stat) |
| { |
| char target_board_platform[PROP_VALUE_MAX] = {'\0'}; |
| char buf[MAX_SOC_INFO_NAME_LEN] = {'\0'}; |
| int soc_id, platform_subtype_id, platform_version; |
| int major_hwver, minor_hwver; |
| int rc; |
| |
| rc = property_get("ro.board.platform", target_board_platform, ""); |
| if (!rc) |
| { |
| ALOGE("get ro.board.platform fail, rc=%d(%s)\n", |
| rc, strerror(errno)); |
| return FAILED; |
| } |
| |
| GET_SOC_INFO(buf, SYSFS_SOCID_PATH1, SYSFS_SOCID_PATH2, soc_id); |
| GET_SOC_INFO(buf, SYSFS_PLATFORM_SUBTYPE_PATH1, |
| SYSFS_PLATFORM_SUBTYPE_PATH2, platform_subtype_id); |
| GET_SOC_INFO(buf, SYSFS_PLATFORM_VERSION_PATH1, |
| SYSFS_PLATFORM_VERSION_PATH2, platform_version); |
| |
| major_hwver = SOCINFO_HWVER_MAJOR(platform_version); |
| minor_hwver = SOCINFO_HWVER_MINOR(platform_version); |
| |
| snprintf(data_nvfile_path, MAX_DATA_NVBIN_PATH_LEN, |
| "%s%s_%d_0x%02x_0x%02x_0x%02x_nv.bin", DATA_NVFILE_DIR, |
| target_board_platform, soc_id, platform_subtype_id&0xff, |
| major_hwver&0xff, minor_hwver&0xff); |
| ALOGI("data_nvfile_path %s\n", |
| data_nvfile_path); |
| |
| if (stat(data_nvfile_path, pdata_nvfile_stat) != 0) |
| { |
| ALOGE("source file do not exist %s\n", |
| data_nvfile_path); |
| return FAILED; |
| } |
| |
| return SUCCESS; |
| } |
| |
| static int nvbin_sendfile(const char *dst, const char *src, |
| struct stat *src_stat) |
| { |
| struct utimbuf new_time; |
| int fp_src, fp_dst; |
| int rc; |
| if ((fp_src = open(src, O_RDONLY)) < 0) |
| { |
| ALOGE("open %s failed(%s).\n", |
| src, strerror(errno)); |
| return FAILED; |
| } |
| |
| if ((fp_dst = open(dst, O_WRONLY |O_TRUNC)) < 0) |
| { |
| close(fp_src); |
| ALOGE("open %s failed(%s).\n", |
| dst, strerror(errno)); |
| return FAILED; |
| } |
| |
| if (sendfile(fp_dst, fp_src, 0, src_stat->st_size) == -1) |
| { |
| ALOGE("dynamic nv sendfile failed: (%s).\n", |
| strerror(errno)); |
| rc = FAILED; |
| goto exit; |
| } |
| |
| new_time.actime = src_stat->st_atime; |
| new_time.modtime = src_stat->st_mtime; |
| if (utime(dst, &new_time) != 0) |
| { |
| ALOGE("could not preserve the timestamp %s", |
| strerror(errno)); |
| rc = FAILED; |
| goto exit; |
| } |
| |
| rc = SUCCESS; |
| exit: |
| close(fp_dst); |
| close(fp_src); |
| return rc; |
| } |
| void dynamic_nv_replace() |
| { |
| char data_nvfile_path[MAX_DATA_NVBIN_PATH_LEN] = {'\0'}; |
| char property_nv_replaced_status [PROPERTY_VALUE_MAX] = { '\0' }; |
| char buf[MAX_SOC_INFO_NAME_LEN] = {'\0'}; |
| struct stat data_nvfile_stat; |
| int rc; |
| |
| if (property_get(QRD_DYNAMIC_NV_PROP, property_nv_replaced_status, NULL) |
| && strcmp(property_nv_replaced_status, "done") == 0) { |
| ALOGI("dynamic nv have been replaced. leave\n"); |
| return; |
| } |
| |
| rc = get_soc_info(buf, SYSFS_HW_PLATFORM_PATH1, SYSFS_HW_PLATFORM_PATH2); |
| if (rc < 0) |
| { |
| ALOGE("get_soc_info(HW_PLATFORM) fail!\n"); |
| return; |
| } else { |
| if( 0 != strncmp(buf, QRD_HW_PLATFORM, MAX_SOC_INFO_NAME_LEN)) |
| { |
| ALOGI("dynamic nv only for QRD platform, current platform:%s.\n", |
| buf); |
| return; |
| } |
| } |
| |
| rc = get_data_nvfile_path(data_nvfile_path, &data_nvfile_stat); |
| if (rc != SUCCESS) |
| { |
| ALOGE("Get source file path fail !\n"); |
| return; |
| } |
| |
| if (property_set(QRD_DYNAMIC_NV_PROP, "replacing") < 0) |
| { |
| ALOGE("set %s to replacing failed (%s).\n", |
| QRD_DYNAMIC_NV_PROP, strerror(errno)); |
| return; |
| } |
| |
| rc = nvbin_sendfile(PERSIST_NVFILE, data_nvfile_path, &data_nvfile_stat); |
| if ( rc != SUCCESS) |
| { |
| ALOGE("nvbin_sendfile failed.\n"); |
| return; |
| } |
| |
| if (property_set(QRD_DYNAMIC_NV_PROP, "done") < 0) |
| { |
| ALOGE("set %s to done failed(%s).\n", |
| QRD_DYNAMIC_NV_PROP, strerror(errno)); |
| return; |
| } |
| |
| ALOGI("dynamic nv replace sucessfully!\n"); |
| |
| } |
| |
| #ifdef WCNSS_QMI_OSS |
| static void *wcnss_qmi_handle = NULL; |
| static int (*wcnss_init_qmi)(void) = NULL; |
| static int (*wcnss_qmi_get_wlan_address)(unsigned char *) = NULL; |
| static void (*wcnss_qmi_deinit)(void) = NULL; |
| |
| static int setup_wcnss_qmi(void) |
| { |
| const char *error = NULL; |
| |
| /* initialize the DMS client and request the wlan mac address */ |
| wcnss_qmi_handle = dlopen("libwcnss_qmi.so", RTLD_NOW); |
| if (!wcnss_qmi_handle) { |
| ALOGE("Failed to open libwcnss_qmi.so: %s", dlerror()); |
| goto dlopen_err; |
| } |
| |
| dlerror(); |
| |
| wcnss_init_qmi = dlsym(wcnss_qmi_handle, "wcnss_init_qmi"); |
| if ((error = dlerror()) != NULL) { |
| ALOGE("Failed to resolve function: %s: %s", |
| "wcnss_init_qmi", error); |
| goto dlsym_err; |
| } |
| |
| dlerror(); |
| |
| wcnss_qmi_get_wlan_address = dlsym(wcnss_qmi_handle, |
| "wcnss_qmi_get_wlan_address"); |
| if ((error = dlerror()) != NULL) { |
| ALOGE("Failed to resolve function: %s: %s", |
| "wcnss_qmi_get_wlan_address", error); |
| goto dlsym_err; |
| } |
| |
| dlerror(); |
| |
| wcnss_qmi_deinit = dlsym(wcnss_qmi_handle, "wcnss_qmi_deinit"); |
| if ((error = dlerror()) != NULL) { |
| ALOGE("Failed to resolve function: %s: %s", |
| "wcnss_qmi_deinit", error); |
| goto dlsym_err; |
| } |
| |
| return SUCCESS; |
| |
| dlsym_err: |
| dlclose(wcnss_qmi_handle); |
| dlopen_err: |
| return FAILED; |
| } |
| #endif |
| |
| int main(int argc, char *argv[]) |
| { |
| UNUSED(argc), UNUSED(argv); |
| int rc; |
| int fd_dev, ret_cal; |
| #if defined(WCNSS_QMI) || defined(WCNSS_QMI_OSS) |
| int nv_mac_addr = FAILED; |
| #ifdef MDM_DETECT |
| struct dev_info mdm_detect_info; |
| int nom = 0; |
| #endif |
| #endif |
| |
| setup_wlan_config_file(); |
| |
| #ifdef WCNSS_QMI_OSS |
| /* dlopen WCNSS QMI lib */ |
| |
| rc = setup_wcnss_qmi(); |
| if (rc == SUCCESS) { |
| if (SUCCESS == (*wcnss_init_qmi)()) { |
| rc = (*wcnss_qmi_get_wlan_address)(wlan_nv_mac_addr); |
| if (rc == SUCCESS) { |
| nv_mac_addr = SUCCESS; |
| ALOGE("WLAN MAC Addr:" MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wlan_nv_mac_addr)); |
| } else |
| ALOGE("Failed to Get MAC addr from modem"); |
| |
| (*wcnss_qmi_deinit)(); |
| } |
| else |
| ALOGE("Failed to Initialize wcnss QMI Interface"); |
| } else { |
| ALOGE("Failed to Initialize wcnss QMI interface library"); |
| } |
| #endif |
| #ifdef WCNSS_QMI |
| #ifdef MDM_DETECT |
| /* Call ESOC API to get the number of modems. |
| If the number of modems is not zero, only then proceed |
| with the eap_proxy intialization.*/ |
| |
| nom = get_system_info(&mdm_detect_info); |
| |
| if (nom > 0) |
| ALOGE("Failed to get system info, ret %d", nom); |
| |
| if (mdm_detect_info.num_modems == 0) { |
| ALOGE("wcnss_service: No Modem support for this target" |
| " number of modems is %d", mdm_detect_info.num_modems); |
| goto nomodem; |
| } |
| |
| ALOGE("wcnss_service: num_modems = %d", mdm_detect_info.num_modems); |
| |
| if(!check_modem_compatability(&mdm_detect_info)) { |
| ALOGE("wcnss_service: Target does not have external modem"); |
| goto nomodem; |
| } |
| #endif |
| |
| /* initialize the DMS client and request the wlan mac address */ |
| |
| if (SUCCESS == wcnss_init_qmi()) { |
| |
| rc = wcnss_qmi_get_wlan_address(wlan_nv_mac_addr); |
| |
| if (rc == SUCCESS) { |
| nv_mac_addr = SUCCESS; |
| ALOGE("WLAN MAC Addr:" MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wlan_nv_mac_addr)); |
| } else |
| ALOGE("Failed to Get MAC addr from modem"); |
| |
| wcnss_qmi_deinit(); |
| } |
| else |
| ALOGE("Failed to Initialize wcnss QMI Interface"); |
| |
| nomodem: |
| #endif |
| |
| dynamic_nv_replace(); |
| |
| #if defined(WCNSS_QMI) || defined(WCNSS_QMI_OSS) |
| setup_wcnss_parameters(&ret_cal, nv_mac_addr); |
| #else |
| setup_wcnss_parameters(&ret_cal); |
| #endif |
| |
| fd_dev = open(WCNSS_DEVICE, O_RDWR); |
| if (fd_dev < 0) { |
| ALOGE("Failed to open wcnss device : %s", |
| strerror(errno)); |
| return fd_dev; |
| } |
| |
| if (ret_cal != FAILED) { |
| rc = wcnss_write_cal_data(fd_dev); |
| if (rc != SUCCESS) |
| ALOGE("No cal data is written to WCNSS %d", rc); |
| else |
| ALOGE("Cal data is successfully written to WCNSS"); |
| } |
| |
| rc = wcnss_read_and_store_cal_data(fd_dev); |
| if (rc != SUCCESS) |
| ALOGE("Failed to read and save cal data %d", rc); |
| else |
| ALOGI("Calibration data was successfull written to %s", |
| WCNSS_CAL_FILE); |
| |
| close(fd_dev); |
| |
| #ifdef WCNSS_QMI_OSS |
| dlclose(wcnss_qmi_handle); |
| #endif |
| |
| return rc; |
| } |