| /* |
| * Copyright (c) 2020,2021 The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * SPDX-License-Identifier: BSD-3-Clause-Clear |
| */ |
| |
| #include <unordered_map> |
| #include <android-base/logging.h> |
| #include <android/hardware/thermal/2.0/IThermal.h> |
| |
| #include "thermalData.h" |
| #include "thermalConfig.h" |
| |
| namespace android { |
| namespace hardware { |
| namespace thermal { |
| namespace V2_0 { |
| namespace implementation { |
| constexpr std::string_view socIDPath("/sys/devices/soc0/soc_id"); |
| |
| std::vector<std::string> cpu_sensors_bengal = |
| { |
| "cpuss-2-usr", |
| "cpuss-2-usr", |
| "cpuss-2-usr", |
| "cpuss-2-usr", |
| "cpu-1-0-usr", |
| "cpu-1-1-usr", |
| "cpu-1-2-usr", |
| "cpu-1-3-usr", |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_bengal = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_bengal, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpu-usr" }, |
| "GPU", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm-usr" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "pmi632-vbat-lvl0" }, |
| "vbat", |
| 3000, |
| 2800, |
| 3000, |
| false, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pmi632-ibat-lvl0" }, |
| "ibat", |
| 4000, |
| 4200, |
| 4000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "soc" }, |
| "soc", |
| 10, |
| 2, |
| 10, |
| false, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_khaje = |
| { |
| "cpuss-2", |
| "cpuss-2", |
| "cpuss-2", |
| "cpuss-2", |
| "cpu-1-0", |
| "cpu-1-1", |
| "cpu-1-2", |
| "cpu-1-3", |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_khaje = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_khaje, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpu" }, |
| "GPU", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "vbat" }, |
| "vbat", |
| 3000, |
| 2800, |
| 3000, |
| false, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm7250b-ibat-lvl0" }, |
| "ibat", |
| 5500, |
| 6000, |
| 5500, |
| true, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "socd" }, |
| "socd", |
| 90, |
| 99, |
| 90, |
| true, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_trinket = |
| { |
| "cpuss-0-usr", |
| "cpuss-0-usr", |
| "cpuss-0-usr", |
| "cpuss-0-usr", |
| "cpu-1-0-usr", |
| "cpu-1-1-usr", |
| "cpu-1-2-usr", |
| "cpu-1-3-usr", |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_trinket = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_trinket, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpu-usr" }, |
| "GPU", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm-adc" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "pmi632-vbat-lvl0" }, |
| "vbat", |
| 3000, |
| 2800, |
| 3000, |
| false, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pmi632-ibat-lvl0" }, |
| "ibat", |
| 4000, |
| 4200, |
| 4000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "soc" }, |
| "soc", |
| 10, |
| 2, |
| 10, |
| false, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_lito = |
| { |
| "cpu-0-0-usr", |
| "cpu-0-1-usr", |
| "cpu-0-2-usr", |
| "cpu-0-3-usr", |
| "cpu-0-4-usr", |
| "cpu-0-5-usr", |
| "cpu-1-0-usr", |
| "cpu-1-2-usr", |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_lito = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_lito, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "GPU", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm-usr" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm7250b-ibat-lvl0" }, |
| "ibat", |
| 4500, |
| 5000, |
| 4500, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "pm7250b-vbat-lvl0" }, |
| "vbat", |
| 3200, |
| 3000, |
| 3200, |
| false, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "soc" }, |
| "soc", |
| 10, |
| 2, |
| 10, |
| false, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_sdmmagpie = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_lito, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "GPU", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm-adc" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "pm6150-vbat-lvl0" }, |
| "vbat", |
| 3000, |
| 2800, |
| 3000, |
| false, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm6150-ibat-lvl0" }, |
| "ibat", |
| 5500, |
| 6000, |
| 5500, |
| true, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "soc" }, |
| "soc", |
| 10, |
| 2, |
| 10, |
| false, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_holi = |
| { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_lito, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "gpu0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1-usr" }, |
| "gpu1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "quiet-therm-usr" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm7250b-ibat-lvl0" }, |
| "ibat", |
| 5500, |
| 6000, |
| 5500, |
| true, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_kona = |
| { |
| "cpu-0-0", |
| "cpu-0-1", |
| "cpu-0-2", |
| "cpu-0-3", |
| "cpu-1-0", |
| "cpu-1-1", |
| "cpu-1-2", |
| "cpu-1-3", |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_msmnile = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_kona, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "gpu0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1-usr" }, |
| "gpu1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8150b-ibat-lvl0" }, |
| "ibat", |
| 4500, |
| 5000, |
| 4500, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "pm8150b-vbat-lvl0" }, |
| "vbat", |
| 3200, |
| 3000, |
| 3200, |
| false, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "soc" }, |
| "soc", |
| 10, |
| 2, |
| 10, |
| false, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> kona_common = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_kona, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0" }, |
| "GPU0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1" }, |
| "GPU1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "skin-msm-therm" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| } |
| }; |
| |
| std::vector<struct target_therm_cfg> kona_specific = { |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8150b-ibat-lvl0" }, |
| "ibat", |
| 4500, |
| 5000, |
| 4500, |
| true, |
| }, |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "vbat" }, |
| "vbat", |
| 3200, |
| 3000, |
| 3200, |
| false, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "socd" }, |
| "socd", |
| 90, |
| 99, |
| 90, |
| false, |
| }, |
| { |
| TemperatureType::NPU, |
| { "npu" }, |
| "npu", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_lahaina = |
| { |
| "cpu-0-0-usr", |
| "cpu-0-1-usr", |
| "cpu-0-2-usr", |
| "cpu-0-3-usr", |
| "cpu-1-0-usr", |
| "cpu-1-2-usr", |
| "cpu-1-4-usr", |
| "cpu-1-6-usr", |
| }; |
| |
| std::vector<struct target_therm_cfg> lahaina_common = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_lahaina, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "GPU0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1-usr" }, |
| "GPU1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8350b-ibat-lvl0" }, |
| "ibat", |
| 6000, |
| 7500, |
| 6000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-0-usr" }, |
| "nsp0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-1-usr" }, |
| "nsp1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-2-usr" }, |
| "nsp2", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> lahaina_specific = { |
| { |
| TemperatureType::SKIN, |
| { "xo-therm-usr" }, |
| "skin", |
| 55000, |
| 95000, |
| 55000, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> shima_specific = { |
| { |
| TemperatureType::SKIN, |
| { "quiet-therm-usr" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> sensor_cfg_yupik = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_lahaina, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0-usr" }, |
| "GPU0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1-usr" }, |
| "GPU1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-0-usr" }, |
| "nsp0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-1-usr" }, |
| "nsp1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "quiet-therm-usr" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_waipio = |
| { |
| "cpu-0-0", |
| "cpu-0-1", |
| "cpu-0-2", |
| "cpu-0-3", |
| "cpu-1-0", |
| "cpu-1-2", |
| "cpu-1-4", |
| "cpu-1-6", |
| }; |
| |
| std::vector<struct target_therm_cfg> waipio_common = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_waipio, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0" }, |
| "GPU0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1" }, |
| "GPU1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-0" }, |
| "nsp0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-1" }, |
| "nsp1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-2" }, |
| "nsp2", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> waipio_specific = { |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8350b-ibat-lvl0" }, |
| "ibat", |
| 6000, |
| 7500, |
| 6000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "xo-therm" }, |
| "skin", |
| 55000, |
| 95000, |
| 55000, |
| true, |
| }, |
| }; |
| |
| std::vector<std::string> cpu_sensors_kalama = |
| { |
| "cpu-0-0", |
| "cpu-0-1", |
| "cpu-0-2", |
| "cpu-1-0", |
| "cpu-1-2", |
| "cpu-1-4", |
| "cpu-1-6", |
| "cpu-1-8", |
| }; |
| |
| std::vector<struct target_therm_cfg> kalama_common = { |
| { |
| TemperatureType::CPU, |
| cpu_sensors_kalama, |
| "", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-0" }, |
| "GPU0", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-1" }, |
| "GPU1", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-2" }, |
| "GPU2", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-3" }, |
| "GPU3", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-4" }, |
| "GPU4", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-5" }, |
| "GPU5", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-6" }, |
| "GPU6", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::GPU, |
| { "gpuss-7" }, |
| "GPU7", |
| 95000, |
| 115000, |
| 95000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-0" }, |
| "nsp0", |
| 100000, |
| 115000, |
| 100000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-1" }, |
| "nsp1", |
| 100000, |
| 115000, |
| 100000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-2" }, |
| "nsp2", |
| 100000, |
| 115000, |
| 100000, |
| true, |
| }, |
| { |
| TemperatureType::NPU, |
| { "nspss-3" }, |
| "nsp3", |
| 100000, |
| 115000, |
| 100000, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> kalama_specific = { |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8550b-ibat-lvl0" }, |
| "ibat", |
| 9000, |
| 10000, |
| 9000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "skin-msm-therm" }, |
| "skin", |
| 46500, |
| 95000, |
| 46500, |
| true, |
| }, |
| }; |
| |
| std::vector<struct target_therm_cfg> diwali_specific = { |
| { |
| TemperatureType::BCL_CURRENT, |
| { "pm8350b-ibat-lvl0" }, |
| "ibat", |
| 6000, |
| 7500, |
| 6000, |
| true, |
| }, |
| { |
| TemperatureType::SKIN, |
| { "quiet-therm" }, |
| "skin", |
| 40000, |
| 95000, |
| 40000, |
| true, |
| }, |
| }; |
| |
| struct target_therm_cfg bat_conf = { |
| TemperatureType::BATTERY, |
| { "battery" }, |
| "battery", |
| 80000, |
| 90000, |
| 80000, |
| true, |
| }; |
| |
| std::vector<struct target_therm_cfg> bcl_conf = { |
| { |
| TemperatureType::BCL_VOLTAGE, |
| { "vbat" }, |
| "vbat", |
| 3200, |
| 3000, |
| 3200, |
| false, |
| }, |
| { |
| TemperatureType::BCL_PERCENTAGE, |
| { "socd" }, |
| "socd", |
| 90, |
| 99, |
| 90, |
| true, |
| }, |
| }; |
| |
| const std::unordered_map<int, std::vector<struct target_therm_cfg>> |
| msm_soc_map = { |
| {417, sensor_cfg_bengal}, // bengal |
| {420, sensor_cfg_bengal}, |
| {444, sensor_cfg_bengal}, |
| {445, sensor_cfg_bengal}, |
| {469, sensor_cfg_bengal}, |
| {470, sensor_cfg_bengal}, |
| {518, sensor_cfg_khaje}, //khaje |
| {561, sensor_cfg_khaje}, //khajeP |
| {562, sensor_cfg_khaje}, //khajeQ |
| {584, sensor_cfg_khaje}, //khajeXR |
| {585, sensor_cfg_khaje}, //khajeG |
| {586, sensor_cfg_khaje}, //khajeIOT |
| {394, sensor_cfg_trinket}, |
| {467, sensor_cfg_trinket}, |
| {468, sensor_cfg_trinket}, |
| {400, sensor_cfg_lito}, // lito |
| {440, sensor_cfg_lito}, |
| {407, sensor_cfg_lito}, // atoll |
| {365, sensor_cfg_sdmmagpie}, |
| {366, sensor_cfg_sdmmagpie}, |
| {434, sensor_cfg_lito}, // lagoon |
| {435, sensor_cfg_lito}, |
| {459, sensor_cfg_lito}, |
| {476, sensor_cfg_lito}, // orchid |
| {339, sensor_cfg_msmnile}, |
| {361, sensor_cfg_msmnile}, |
| {362, sensor_cfg_msmnile}, |
| {367, sensor_cfg_msmnile}, |
| {356, kona_common}, // kona |
| {415, lahaina_common}, // lahaina |
| {439, lahaina_common}, // lahainap |
| {456, lahaina_common}, // lahaina-atp |
| {501, lahaina_common}, |
| {502, lahaina_common}, |
| {450, lahaina_common}, // shima |
| {454, sensor_cfg_holi}, // holi |
| {475, sensor_cfg_yupik}, // yupik |
| {515, sensor_cfg_yupik}, // YUPIK-LTE |
| {457, waipio_common}, //Waipio |
| {482, waipio_common}, //Waipio |
| {552, waipio_common}, //Waipio-LTE |
| {506, waipio_common}, //diwali |
| {530, waipio_common}, // cape |
| {531, waipio_common}, // cape |
| {540, waipio_common}, // cape |
| {519, kalama_common}, //Kalama |
| {536, kalama_common}, //Kalamap |
| {600, kalama_common}, //Kalama_sg |
| {601, kalama_common}, //Kalamap_sg |
| {603, kalama_common}, //Kalama_qcs |
| {604, kalama_common}, //Kalama_qcm |
| }; |
| |
| const std::unordered_map<int, std::vector<struct target_therm_cfg>> |
| msm_soc_specific = { |
| {356, kona_specific}, // kona |
| {415, lahaina_specific}, // lahaina |
| {439, lahaina_specific}, // lahainap |
| {456, lahaina_specific}, // lahaina-atp |
| {501, lahaina_specific}, |
| {502, lahaina_specific}, |
| {450, shima_specific}, // shima |
| {457, waipio_specific}, //Waipio |
| {482, waipio_specific}, //Waipio |
| {552, waipio_specific}, //Waipio-LTE |
| {506, diwali_specific}, //diwali |
| {530, waipio_specific}, // cape |
| {531, waipio_specific}, // cape |
| {540, waipio_specific}, // cape |
| {519, kalama_specific}, //Kalama |
| {536, kalama_specific}, //Kalamap |
| {600, kalama_specific}, //Kalama_sg |
| {601, kalama_specific}, //Kalamap_sg |
| {603, kalama_specific}, //Kalama_qcs |
| {604, kalama_specific}, //Kalama_qcm |
| }; |
| |
| std::vector<struct target_therm_cfg> add_target_config( |
| int socID, |
| std::vector<struct target_therm_cfg> conf) |
| { |
| std::vector<struct target_therm_cfg> targetConf; |
| |
| if (msm_soc_specific.find(socID) == msm_soc_specific.end()) |
| return conf; |
| targetConf = (msm_soc_specific.find(socID))->second; |
| |
| conf.insert(conf.end(), targetConf.begin(), |
| targetConf.end()); |
| return conf; |
| } |
| |
| ThermalConfig::ThermalConfig():cmnInst() |
| { |
| std::unordered_map<int, std::vector<struct target_therm_cfg>>::const_iterator it; |
| std::vector<struct target_therm_cfg>::iterator it_vec; |
| bool bcl_defined = false; |
| std::string soc_val; |
| int ct = 0; |
| bool read_ok = false; |
| |
| do { |
| if (cmnInst.readFromFile(socIDPath, soc_val) <= 0) { |
| LOG(ERROR) <<"soc ID fetch error"; |
| return; |
| } |
| try { |
| soc_id = std::stoi(soc_val, nullptr, 0); |
| read_ok = true; |
| } |
| catch (std::exception &err) { |
| LOG(ERROR) <<"soc id stoi err:" << err.what() |
| << " buf:" << soc_val; |
| } |
| ct++; |
| } while (!read_ok && ct < RETRY_CT); |
| if (soc_id <= 0) { |
| LOG(ERROR) << "Invalid soc ID: " << soc_id; |
| return; |
| } |
| it = msm_soc_map.find(soc_id); |
| if (it == msm_soc_map.end()) { |
| LOG(ERROR) << "No config for soc ID: " << soc_id; |
| return; |
| } |
| thermalConfig = add_target_config(soc_id, it->second); |
| for (it_vec = thermalConfig.begin(); |
| it_vec != thermalConfig.end(); it_vec++) { |
| if (it_vec->type == TemperatureType::BCL_PERCENTAGE) |
| bcl_defined = true; |
| } |
| |
| thermalConfig.push_back(bat_conf); |
| if (!bcl_defined) |
| thermalConfig.insert(thermalConfig.end(), |
| bcl_conf.begin(), bcl_conf.end()); |
| LOG(DEBUG) << "Total sensors:" << thermalConfig.size(); |
| } |
| } // namespace implementation |
| } // namespace V2_0 |
| } // namespace thermal |
| } // namespace hardware |
| } // namespace android |
| |