| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * Copyright (C) 2012-2014, The Linux Foundation All rights reserved. |
| * |
| * Not a Contribution, Apache license notifications and license are retained |
| * for attribution purposes only. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #define ATRACE_TAG (ATRACE_TAG_GRAPHICS | ATRACE_TAG_HAL) |
| #define HWC_UTILS_DEBUG 0 |
| #include <math.h> |
| #include <sys/ioctl.h> |
| #include <linux/fb.h> |
| #include <binder/IServiceManager.h> |
| #include <EGL/egl.h> |
| #include <cutils/properties.h> |
| #include <utils/Trace.h> |
| #include <gralloc_priv.h> |
| #include <overlay.h> |
| #include <overlayRotator.h> |
| #include <overlayWriteback.h> |
| #include "hwc_utils.h" |
| #include "hwc_mdpcomp.h" |
| #include "hwc_fbupdate.h" |
| #include "hwc_ad.h" |
| #include "mdp_version.h" |
| #include "hwc_copybit.h" |
| #include "hwc_dump_layers.h" |
| #include "hdmi.h" |
| #include "hwc_qclient.h" |
| #include "QService.h" |
| #include "comptype.h" |
| #include "hwc_virtual.h" |
| #include "qd_utils.h" |
| #include <sys/sysinfo.h> |
| #include <dlfcn.h> |
| |
| using namespace qClient; |
| using namespace qService; |
| using namespace android; |
| using namespace overlay; |
| using namespace overlay::utils; |
| namespace ovutils = overlay::utils; |
| |
| #ifdef QCOM_BSP |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| EGLAPI EGLBoolean eglGpuPerfHintQCOM(EGLDisplay dpy, EGLContext ctx, |
| EGLint *attrib_list); |
| #define EGL_GPU_HINT_1 0x32D0 |
| #define EGL_GPU_HINT_2 0x32D1 |
| |
| #define EGL_GPU_LEVEL_0 0x0 |
| #define EGL_GPU_LEVEL_1 0x1 |
| #define EGL_GPU_LEVEL_2 0x2 |
| #define EGL_GPU_LEVEL_3 0x3 |
| #define EGL_GPU_LEVEL_4 0x4 |
| #define EGL_GPU_LEVEL_5 0x5 |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif |
| |
| #define PROP_DEFAULT_APPBUFFER "sf.default.app_buffer_count" |
| #define MAX_RAM_SIZE 512*1024*1024 |
| #define qHD_WIDTH 540 |
| |
| |
| namespace qhwc { |
| |
| // Std refresh rates for digital videos- 24p, 30p, 48p and 60p |
| uint32_t stdRefreshRates[] = { 30, 24, 48, 60 }; |
| |
| bool isValidResolution(hwc_context_t *ctx, uint32_t xres, uint32_t yres) |
| { |
| return !((xres > qdutils::MDPVersion::getInstance().getMaxPipeWidth() && |
| !isDisplaySplit(ctx, HWC_DISPLAY_PRIMARY)) || |
| (xres < MIN_DISPLAY_XRES || yres < MIN_DISPLAY_YRES)); |
| } |
| |
| void changeResolution(hwc_context_t *ctx, int xres_orig, int yres_orig, |
| int width, int height) { |
| //Store original display resolution. |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres_new = xres_orig; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres_new = yres_orig; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].customFBSize = false; |
| char property[PROPERTY_VALUE_MAX] = {'\0'}; |
| char *yptr = NULL; |
| if (property_get("debug.hwc.fbsize", property, NULL) > 0) { |
| yptr = strcasestr(property,"x"); |
| if(yptr) { |
| int xres_new = atoi(property); |
| int yres_new = atoi(yptr + 1); |
| if (isValidResolution(ctx,xres_new,yres_new) && |
| xres_new != xres_orig && yres_new != yres_orig) { |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres_new = xres_new; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres_new = yres_new; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].customFBSize = true; |
| |
| //Caluculate DPI according to changed resolution. |
| float xdpi = ((float)xres_new * 25.4f) / (float)width; |
| float ydpi = ((float)yres_new * 25.4f) / (float)height; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xdpi = xdpi; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].ydpi = ydpi; |
| } |
| } |
| } |
| } |
| |
| // Initialize hdmi display attributes based on |
| // hdmi display class state |
| void updateDisplayInfo(hwc_context_t* ctx, int dpy) { |
| ctx->dpyAttr[dpy].fd = ctx->mHDMIDisplay->getFd(); |
| ctx->dpyAttr[dpy].xres = ctx->mHDMIDisplay->getWidth(); |
| ctx->dpyAttr[dpy].yres = ctx->mHDMIDisplay->getHeight(); |
| ctx->dpyAttr[dpy].mMDPScalingMode = ctx->mHDMIDisplay->getMDPScalingMode(); |
| ctx->dpyAttr[dpy].vsync_period = ctx->mHDMIDisplay->getVsyncPeriod(); |
| //FIXME: for now assume HDMI as secure |
| //Will need to read the HDCP status from the driver |
| //and update this accordingly |
| ctx->dpyAttr[dpy].secure = true; |
| ctx->mViewFrame[dpy].left = 0; |
| ctx->mViewFrame[dpy].top = 0; |
| ctx->mViewFrame[dpy].right = ctx->dpyAttr[dpy].xres; |
| ctx->mViewFrame[dpy].bottom = ctx->dpyAttr[dpy].yres; |
| } |
| |
| // Reset hdmi display attributes and list stats structures |
| void resetDisplayInfo(hwc_context_t* ctx, int dpy) { |
| memset(&(ctx->dpyAttr[dpy]), 0, sizeof(ctx->dpyAttr[dpy])); |
| memset(&(ctx->listStats[dpy]), 0, sizeof(ctx->listStats[dpy])); |
| // We reset the fd to -1 here but External display class is responsible |
| // for it when the display is disconnected. This is handled as part of |
| // EXTERNAL_OFFLINE event. |
| ctx->dpyAttr[dpy].fd = -1; |
| } |
| |
| // Initialize composition resources |
| void initCompositionResources(hwc_context_t* ctx, int dpy) { |
| ctx->mFBUpdate[dpy] = IFBUpdate::getObject(ctx, dpy); |
| ctx->mMDPComp[dpy] = MDPComp::getObject(ctx, dpy); |
| } |
| |
| void destroyCompositionResources(hwc_context_t* ctx, int dpy) { |
| if(ctx->mFBUpdate[dpy]) { |
| delete ctx->mFBUpdate[dpy]; |
| ctx->mFBUpdate[dpy] = NULL; |
| } |
| if(ctx->mMDPComp[dpy]) { |
| delete ctx->mMDPComp[dpy]; |
| ctx->mMDPComp[dpy] = NULL; |
| } |
| } |
| |
| static int openFramebufferDevice(hwc_context_t *ctx) |
| { |
| struct fb_fix_screeninfo finfo; |
| struct fb_var_screeninfo info; |
| |
| int fb_fd = openFb(HWC_DISPLAY_PRIMARY); |
| if(fb_fd < 0) { |
| ALOGE("%s: Error Opening FB : %s", __FUNCTION__, strerror(errno)); |
| return -errno; |
| } |
| |
| if (ioctl(fb_fd, FBIOGET_VSCREENINFO, &info) == -1) { |
| ALOGE("%s:Error in ioctl FBIOGET_VSCREENINFO: %s", __FUNCTION__, |
| strerror(errno)); |
| close(fb_fd); |
| return -errno; |
| } |
| |
| if (int(info.width) <= 0 || int(info.height) <= 0) { |
| // the driver doesn't return that information |
| // default to 160 dpi |
| info.width = (int)(((float)info.xres * 25.4f)/160.0f + 0.5f); |
| info.height = (int)(((float)info.yres * 25.4f)/160.0f + 0.5f); |
| } |
| |
| float xdpi = ((float)info.xres * 25.4f) / (float)info.width; |
| float ydpi = ((float)info.yres * 25.4f) / (float)info.height; |
| |
| #ifdef MSMFB_METADATA_GET |
| struct msmfb_metadata metadata; |
| memset(&metadata, 0 , sizeof(metadata)); |
| metadata.op = metadata_op_frame_rate; |
| |
| if (ioctl(fb_fd, MSMFB_METADATA_GET, &metadata) == -1) { |
| ALOGE("%s:Error retrieving panel frame rate: %s", __FUNCTION__, |
| strerror(errno)); |
| close(fb_fd); |
| return -errno; |
| } |
| |
| float fps = (float)metadata.data.panel_frame_rate; |
| #else |
| //XXX: Remove reserved field usage on all baselines |
| //The reserved[3] field is used to store FPS by the driver. |
| float fps = info.reserved[3] & 0xFF; |
| #endif |
| |
| if (ioctl(fb_fd, FBIOGET_FSCREENINFO, &finfo) == -1) { |
| ALOGE("%s:Error in ioctl FBIOGET_FSCREENINFO: %s", __FUNCTION__, |
| strerror(errno)); |
| close(fb_fd); |
| return -errno; |
| } |
| |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = fb_fd; |
| //xres, yres may not be 32 aligned |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].stride = finfo.line_length /(info.xres/8); |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres = info.xres; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres = info.yres; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xdpi = xdpi; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].ydpi = ydpi; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].refreshRate = (uint32_t)fps; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].dynRefreshRate = (uint32_t)fps; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].secure = true; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].vsync_period = |
| (uint32_t)(1000000000l / fps); |
| |
| //To change resolution of primary display |
| changeResolution(ctx, info.xres, info.yres, info.width, info.height); |
| |
| //Unblank primary on first boot |
| if(ioctl(fb_fd, FBIOBLANK,FB_BLANK_UNBLANK) < 0) { |
| ALOGE("%s: Failed to unblank display", __FUNCTION__); |
| return -errno; |
| } |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].isActive = true; |
| |
| return 0; |
| } |
| |
| static void changeDefaultAppBufferCount() { |
| struct sysinfo info; |
| unsigned long int ramSize = 0; |
| if (!sysinfo(&info)) { |
| ramSize = info.totalram ; |
| } |
| int fb_fd = -1; |
| struct fb_var_screeninfo sInfo ={0}; |
| fb_fd = open("/dev/graphics/fb0", O_RDONLY); |
| if (fb_fd >=0) { |
| ioctl(fb_fd, FBIOGET_VSCREENINFO, &sInfo); |
| close(fb_fd); |
| } |
| if ((ramSize && ramSize < MAX_RAM_SIZE) && |
| (sInfo.xres && sInfo.xres <= qHD_WIDTH )) { |
| property_set(PROP_DEFAULT_APPBUFFER, "2"); |
| } |
| } |
| |
| void initContext(hwc_context_t *ctx) |
| { |
| overlay::Overlay::initOverlay(); |
| ctx->mHDMIDisplay = new HDMIDisplay(); |
| uint32_t priW = 0, priH = 0; |
| // 1. HDMI as Primary |
| // -If HDMI cable is connected, read display configs from edid data |
| // -If HDMI cable is not connected then use default data in vscreeninfo |
| // 2. HDMI as External |
| // -Initialize HDMI class for use with external display |
| // -Use vscreeninfo to populate display configs |
| if(ctx->mHDMIDisplay->isHDMIPrimaryDisplay()) { |
| int connected = ctx->mHDMIDisplay->getConnectedState(); |
| if(connected == 1) { |
| ctx->mHDMIDisplay->configure(); |
| updateDisplayInfo(ctx, HWC_DISPLAY_PRIMARY); |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].connected = true; |
| } else { |
| openFramebufferDevice(ctx); |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].connected = false; |
| } |
| } else { |
| openFramebufferDevice(ctx); |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].connected = true; |
| // Send the primary resolution to the hdmi display class |
| // to be used for MDP scaling functionality |
| priW = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; |
| priH = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; |
| ctx->mHDMIDisplay->setPrimaryAttributes(priW, priH); |
| } |
| |
| char value[PROPERTY_VALUE_MAX]; |
| ctx->mMDP.version = qdutils::MDPVersion::getInstance().getMDPVersion(); |
| ctx->mMDP.hasOverlay = qdutils::MDPVersion::getInstance().hasOverlay(); |
| ctx->mMDP.panel = qdutils::MDPVersion::getInstance().getPanelType(); |
| ctx->mOverlay = overlay::Overlay::getInstance(); |
| ctx->mRotMgr = RotMgr::getInstance(); |
| ctx->mBWCEnabled = qdutils::MDPVersion::getInstance().supportsBWC(); |
| |
| //default_app_buffer for ferrum |
| if (ctx->mMDP.version == qdutils::MDP_V3_0_5) { |
| changeDefaultAppBufferCount(); |
| } |
| // Initialize composition objects for the primary display |
| initCompositionResources(ctx, HWC_DISPLAY_PRIMARY); |
| |
| // Check if the target supports copybit compostion (dyn/mdp) to |
| // decide if we need to open the copybit module. |
| int compositionType = |
| qdutils::QCCompositionType::getInstance().getCompositionType(); |
| |
| // Only MDP copybit is used |
| if ((compositionType & (qdutils::COMPOSITION_TYPE_DYN | |
| qdutils::COMPOSITION_TYPE_MDP)) && |
| ((qdutils::MDPVersion::getInstance().getMDPVersion() == |
| qdutils::MDP_V3_0_4) || |
| (qdutils::MDPVersion::getInstance().getMDPVersion() == |
| qdutils::MDP_V3_0_5))) { |
| ctx->mCopyBit[HWC_DISPLAY_PRIMARY] = new CopyBit(ctx, |
| HWC_DISPLAY_PRIMARY); |
| } |
| |
| ctx->mHWCVirtual = new HWCVirtualVDS(); |
| ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].isActive = false; |
| ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].connected = false; |
| ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isActive = false; |
| ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].connected = false; |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].mMDPScalingMode= false; |
| ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].mMDPScalingMode = false; |
| ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].mMDPScalingMode = false; |
| |
| //Initialize the primary display viewFrame info |
| ctx->mViewFrame[HWC_DISPLAY_PRIMARY].left = 0; |
| ctx->mViewFrame[HWC_DISPLAY_PRIMARY].top = 0; |
| ctx->mViewFrame[HWC_DISPLAY_PRIMARY].right = |
| (int)ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; |
| ctx->mViewFrame[HWC_DISPLAY_PRIMARY].bottom = |
| (int)ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; |
| |
| for (uint32_t i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { |
| ctx->mHwcDebug[i] = new HwcDebug(i); |
| ctx->mLayerRotMap[i] = new LayerRotMap(); |
| ctx->mAnimationState[i] = ANIMATION_STOPPED; |
| ctx->dpyAttr[i].mActionSafePresent = false; |
| ctx->dpyAttr[i].mAsWidthRatio = 0; |
| ctx->dpyAttr[i].mAsHeightRatio = 0; |
| } |
| |
| for (uint32_t i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { |
| ctx->mPrevHwLayerCount[i] = 0; |
| } |
| |
| MDPComp::init(ctx); |
| ctx->mAD = new AssertiveDisplay(ctx); |
| |
| ctx->vstate.enable = false; |
| ctx->vstate.fakevsync = false; |
| ctx->mExtOrientation = 0; |
| ctx->numActiveDisplays = 1; |
| |
| //Right now hwc starts the service but anybody could do it, or it could be |
| //independent process as well. |
| QService::init(); |
| sp<IQClient> client = new QClient(ctx); |
| android::sp<qService::IQService> qservice_sp = interface_cast<IQService>( |
| defaultServiceManager()->getService( |
| String16("display.qservice"))); |
| if (qservice_sp.get()) { |
| qservice_sp->connect(client); |
| } else { |
| ALOGE("%s: Failed to acquire service pointer", __FUNCTION__); |
| return ; |
| } |
| |
| // Initialize device orientation to its default orientation |
| ctx->deviceOrientation = 0; |
| ctx->mBufferMirrorMode = false; |
| |
| property_get("sys.hwc.windowbox_aspect_ratio_tolerance", value, "0"); |
| ctx->mAspectRatioToleranceLevel = (((float)atoi(value)) / 100.0f); |
| |
| ctx->enableABC = false; |
| property_get("debug.sf.hwc.canUseABC", value, "0"); |
| ctx->enableABC = atoi(value) ? true : false; |
| |
| // Initializing boot anim completed check to false |
| ctx->mBootAnimCompleted = false; |
| |
| // Initialize gpu perfomance hint related parameters |
| property_get("sys.hwc.gpu_perf_mode", value, "0"); |
| #ifdef QCOM_BSP |
| ctx->mGPUHintInfo.mGpuPerfModeEnable = atoi(value)? true : false; |
| |
| ctx->mGPUHintInfo.mEGLDisplay = NULL; |
| ctx->mGPUHintInfo.mEGLContext = NULL; |
| ctx->mGPUHintInfo.mCompositionState = COMPOSITION_STATE_MDP; |
| ctx->mGPUHintInfo.mCurrGPUPerfMode = EGL_GPU_LEVEL_0; |
| #endif |
| // Read the system property to determine if windowboxing feature is enabled. |
| ctx->mWindowboxFeature = false; |
| if(property_get("sys.hwc.windowbox_feature", value, "false") |
| && !strcmp(value, "true")) { |
| ctx->mWindowboxFeature = true; |
| } |
| |
| ctx->mUseMetaDataRefreshRate = true; |
| if(property_get("persist.metadata_dynfps.disable", value, "false") |
| && !strcmp(value, "true")) { |
| ctx->mUseMetaDataRefreshRate = false; |
| } |
| |
| memset(&(ctx->mPtorInfo), 0, sizeof(ctx->mPtorInfo)); |
| ctx->mHPDEnabled = false; |
| ALOGI("Initializing Qualcomm Hardware Composer"); |
| ALOGI("MDP version: %d", ctx->mMDP.version); |
| } |
| |
| void closeContext(hwc_context_t *ctx) |
| { |
| if(ctx->mOverlay) { |
| delete ctx->mOverlay; |
| ctx->mOverlay = NULL; |
| } |
| |
| if(ctx->mRotMgr) { |
| delete ctx->mRotMgr; |
| ctx->mRotMgr = NULL; |
| } |
| |
| for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { |
| if(ctx->mCopyBit[i]) { |
| delete ctx->mCopyBit[i]; |
| ctx->mCopyBit[i] = NULL; |
| } |
| } |
| |
| if(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd) { |
| close(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd); |
| ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = -1; |
| } |
| |
| if(ctx->mHDMIDisplay) { |
| delete ctx->mHDMIDisplay; |
| ctx->mHDMIDisplay = NULL; |
| } |
| |
| for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { |
| destroyCompositionResources(ctx, i); |
| |
| if(ctx->mHwcDebug[i]) { |
| delete ctx->mHwcDebug[i]; |
| ctx->mHwcDebug[i] = NULL; |
| } |
| if(ctx->mLayerRotMap[i]) { |
| delete ctx->mLayerRotMap[i]; |
| ctx->mLayerRotMap[i] = NULL; |
| } |
| } |
| if(ctx->mHWCVirtual) { |
| delete ctx->mHWCVirtual; |
| ctx->mHWCVirtual = NULL; |
| } |
| if(ctx->mAD) { |
| delete ctx->mAD; |
| ctx->mAD = NULL; |
| } |
| |
| |
| } |
| |
| //Helper to roundoff the refreshrates |
| uint32_t roundOff(uint32_t refreshRate) { |
| int count = (int) (sizeof(stdRefreshRates)/sizeof(stdRefreshRates[0])); |
| uint32_t rate = refreshRate; |
| for(int i=0; i< count; i++) { |
| if(abs(stdRefreshRates[i] - refreshRate) < 2) { |
| // Most likely used for video, the fps can fluctuate |
| // Ex: b/w 29 and 30 for 30 fps clip |
| rate = stdRefreshRates[i]; |
| break; |
| } |
| } |
| return rate; |
| } |
| |
| //Helper func to set the dyn fps |
| void setRefreshRate(hwc_context_t* ctx, int dpy, uint32_t refreshRate) { |
| //Update only if different |
| if(!ctx || refreshRate == ctx->dpyAttr[dpy].dynRefreshRate) |
| return; |
| const int fbNum = Overlay::getFbForDpy(dpy); |
| char sysfsPath[qdutils::MAX_SYSFS_FILE_PATH]; |
| snprintf (sysfsPath, sizeof(sysfsPath), |
| "/sys/devices/virtual/graphics/fb%d/dynamic_fps", fbNum); |
| |
| int fd = open(sysfsPath, O_WRONLY); |
| if(fd >= 0) { |
| char str[64]; |
| snprintf(str, sizeof(str), "%d", refreshRate); |
| ssize_t ret = write(fd, str, strlen(str)); |
| if(ret < 0) { |
| ALOGE("%s: Failed to write %d with error %s", |
| __FUNCTION__, refreshRate, strerror(errno)); |
| } else { |
| ctx->dpyAttr[dpy].dynRefreshRate = refreshRate; |
| ALOGD_IF(HWC_UTILS_DEBUG, "%s: Wrote %d to dynamic_fps", |
| __FUNCTION__, refreshRate); |
| } |
| close(fd); |
| } else { |
| ALOGE("%s: Failed to open %s with error %s", __FUNCTION__, sysfsPath, |
| strerror(errno)); |
| } |
| } |
| |
| void dumpsys_log(android::String8& buf, const char* fmt, ...) |
| { |
| va_list varargs; |
| va_start(varargs, fmt); |
| buf.appendFormatV(fmt, varargs); |
| va_end(varargs); |
| } |
| |
| int getExtOrientation(hwc_context_t* ctx) { |
| int extOrient = ctx->mExtOrientation; |
| if(ctx->mBufferMirrorMode) |
| extOrient = getMirrorModeOrientation(ctx); |
| return extOrient; |
| } |
| |
| /* Calculates the destination position based on the action safe rectangle */ |
| void getActionSafePosition(hwc_context_t *ctx, int dpy, hwc_rect_t& rect) { |
| // Position |
| int x = rect.left, y = rect.top; |
| int w = rect.right - rect.left; |
| int h = rect.bottom - rect.top; |
| |
| if(!ctx->dpyAttr[dpy].mActionSafePresent) |
| return; |
| // Read action safe properties |
| int asWidthRatio = ctx->dpyAttr[dpy].mAsWidthRatio; |
| int asHeightRatio = ctx->dpyAttr[dpy].mAsHeightRatio; |
| |
| float wRatio = 1.0; |
| float hRatio = 1.0; |
| float xRatio = 1.0; |
| float yRatio = 1.0; |
| |
| uint32_t fbWidth = ctx->dpyAttr[dpy].xres; |
| uint32_t fbHeight = ctx->dpyAttr[dpy].yres; |
| if(ctx->dpyAttr[dpy].mMDPScalingMode) { |
| // if MDP scaling mode is enabled for external, need to query |
| // the actual width and height, as that is the physical w & h |
| ctx->mHDMIDisplay->getAttributes(fbWidth, fbHeight); |
| } |
| |
| |
| // Since external is rotated 90, need to swap width/height |
| int extOrient = getExtOrientation(ctx); |
| |
| if(extOrient & HWC_TRANSFORM_ROT_90) |
| swap(fbWidth, fbHeight); |
| |
| float asX = 0; |
| float asY = 0; |
| float asW = (float)fbWidth; |
| float asH = (float)fbHeight; |
| |
| // based on the action safe ratio, get the Action safe rectangle |
| asW = ((float)fbWidth * (1.0f - (float)asWidthRatio / 100.0f)); |
| asH = ((float)fbHeight * (1.0f - (float)asHeightRatio / 100.0f)); |
| asX = ((float)fbWidth - asW) / 2; |
| asY = ((float)fbHeight - asH) / 2; |
| |
| // calculate the position ratio |
| xRatio = (float)x/(float)fbWidth; |
| yRatio = (float)y/(float)fbHeight; |
| wRatio = (float)w/(float)fbWidth; |
| hRatio = (float)h/(float)fbHeight; |
| |
| //Calculate the position... |
| x = int((xRatio * asW) + asX); |
| y = int((yRatio * asH) + asY); |
| w = int(wRatio * asW); |
| h = int(hRatio * asH); |
| |
| // Convert it back to hwc_rect_t |
| rect.left = x; |
| rect.top = y; |
| rect.right = w + rect.left; |
| rect.bottom = h + rect.top; |
| |
| return; |
| } |
| |
| // This function gets the destination position for Seconday display |
| // based on the position and aspect ratio with orientation |
| void getAspectRatioPosition(hwc_context_t* ctx, int dpy, int extOrientation, |
| hwc_rect_t& inRect, hwc_rect_t& outRect) { |
| // Physical display resolution |
| float fbWidth = (float)ctx->dpyAttr[dpy].xres; |
| float fbHeight = (float)ctx->dpyAttr[dpy].yres; |
| //display position(x,y,w,h) in correct aspectratio after rotation |
| int xPos = 0; |
| int yPos = 0; |
| float width = fbWidth; |
| float height = fbHeight; |
| // Width/Height used for calculation, after rotation |
| float actualWidth = fbWidth; |
| float actualHeight = fbHeight; |
| |
| float wRatio = 1.0; |
| float hRatio = 1.0; |
| float xRatio = 1.0; |
| float yRatio = 1.0; |
| hwc_rect_t rect = {0, 0, (int)fbWidth, (int)fbHeight}; |
| |
| Dim inPos(inRect.left, inRect.top, inRect.right - inRect.left, |
| inRect.bottom - inRect.top); |
| Dim outPos(outRect.left, outRect.top, outRect.right - outRect.left, |
| outRect.bottom - outRect.top); |
| |
| Whf whf((uint32_t)fbWidth, (uint32_t)fbHeight, 0); |
| eTransform extorient = static_cast<eTransform>(extOrientation); |
| // To calculate the destination co-ordinates in the new orientation |
| preRotateSource(extorient, whf, inPos); |
| |
| if(extOrientation & HAL_TRANSFORM_ROT_90) { |
| // Swap width/height for input position |
| swapWidthHeight(actualWidth, actualHeight); |
| qdutils::getAspectRatioPosition((int)fbWidth, (int)fbHeight, |
| (int)actualWidth, (int)actualHeight, rect); |
| xPos = rect.left; |
| yPos = rect.top; |
| width = float(rect.right - rect.left); |
| height = float(rect.bottom - rect.top); |
| } |
| xRatio = (float)((float)inPos.x/actualWidth); |
| yRatio = (float)((float)inPos.y/actualHeight); |
| wRatio = (float)((float)inPos.w/actualWidth); |
| hRatio = (float)((float)inPos.h/actualHeight); |
| |
| //Calculate the pos9ition... |
| outPos.x = uint32_t((xRatio * width) + (float)xPos); |
| outPos.y = uint32_t((yRatio * height) + (float)yPos); |
| outPos.w = uint32_t(wRatio * width); |
| outPos.h = uint32_t(hRatio * height); |
| ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio Position: x = %d," |
| "y = %d w = %d h = %d", __FUNCTION__, outPos.x, outPos.y, |
| outPos.w, outPos.h); |
| |
| // For sidesync, the dest fb will be in portrait orientation, and the crop |
| // will be updated to avoid the black side bands, and it will be upscaled |
| // to fit the dest RB, so recalculate |
| // the position based on the new width and height |
| if ((extOrientation & HWC_TRANSFORM_ROT_90) && |
| isOrientationPortrait(ctx)) { |
| hwc_rect_t r = {0, 0, 0, 0}; |
| //Calculate the position |
| xRatio = (float)(outPos.x - xPos)/width; |
| // GetaspectRatio -- tricky to get the correct aspect ratio |
| // But we need to do this. |
| qdutils::getAspectRatioPosition((int)width, (int)height, |
| (int)width,(int)height, r); |
| xPos = r.left; |
| yPos = r.top; |
| float tempHeight = float(r.bottom - r.top); |
| yRatio = (float)yPos/height; |
| wRatio = (float)outPos.w/width; |
| hRatio = tempHeight/height; |
| |
| //Map the coordinates back to Framebuffer domain |
| outPos.x = uint32_t(xRatio * fbWidth); |
| outPos.y = uint32_t(yRatio * fbHeight); |
| outPos.w = uint32_t(wRatio * fbWidth); |
| outPos.h = uint32_t(hRatio * fbHeight); |
| |
| ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio for device in" |
| "portrait: x = %d,y = %d w = %d h = %d", __FUNCTION__, |
| outPos.x, outPos.y, |
| outPos.w, outPos.h); |
| } |
| if(ctx->dpyAttr[dpy].mMDPScalingMode) { |
| uint32_t extW = 0, extH = 0; |
| if(dpy == HWC_DISPLAY_EXTERNAL) { |
| ctx->mHDMIDisplay->getAttributes(extW, extH); |
| } else if(dpy == HWC_DISPLAY_VIRTUAL) { |
| extW = ctx->mHWCVirtual->getScalingWidth(); |
| extH = ctx->mHWCVirtual->getScalingHeight(); |
| } |
| ALOGD_IF(HWC_UTILS_DEBUG, "%s: Scaling mode extW=%d extH=%d", |
| __FUNCTION__, extW, extH); |
| |
| fbWidth = (float)ctx->dpyAttr[dpy].xres; |
| fbHeight = (float)ctx->dpyAttr[dpy].yres; |
| //Calculate the position... |
| xRatio = (float)outPos.x/fbWidth; |
| yRatio = (float)outPos.y/fbHeight; |
| wRatio = (float)outPos.w/fbWidth; |
| hRatio = (float)outPos.h/fbHeight; |
| |
| outPos.x = uint32_t(xRatio * (float)extW); |
| outPos.y = uint32_t(yRatio * (float)extH); |
| outPos.w = uint32_t(wRatio * (float)extW); |
| outPos.h = uint32_t(hRatio * (float)extH); |
| } |
| // Convert Dim to hwc_rect_t |
| outRect.left = outPos.x; |
| outRect.top = outPos.y; |
| outRect.right = outPos.x + outPos.w; |
| outRect.bottom = outPos.y + outPos.h; |
| |
| return; |
| } |
| |
| bool isPrimaryPortrait(hwc_context_t *ctx) { |
| int fbWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; |
| int fbHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; |
| if(fbWidth < fbHeight) { |
| return true; |
| } |
| return false; |
| } |
| |
| bool isOrientationPortrait(hwc_context_t *ctx) { |
| if(isPrimaryPortrait(ctx)) { |
| return !(ctx->deviceOrientation & 0x1); |
| } |
| return (ctx->deviceOrientation & 0x1); |
| } |
| |
| void calcExtDisplayPosition(hwc_context_t *ctx, |
| private_handle_t *hnd, |
| int dpy, |
| hwc_rect_t& sourceCrop, |
| hwc_rect_t& displayFrame, |
| int& transform, |
| ovutils::eTransform& orient) { |
| // Swap width and height when there is a 90deg transform |
| int extOrient = getExtOrientation(ctx); |
| if(dpy && ctx->mOverlay->isUIScalingOnExternalSupported()) { |
| if(!isYuvBuffer(hnd)) { |
| if(extOrient & HWC_TRANSFORM_ROT_90) { |
| int dstWidth = ctx->dpyAttr[dpy].xres; |
| int dstHeight = ctx->dpyAttr[dpy].yres;; |
| int srcWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; |
| int srcHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; |
| if(!isPrimaryPortrait(ctx)) { |
| swap(srcWidth, srcHeight); |
| } // Get Aspect Ratio for external |
| qdutils::getAspectRatioPosition(dstWidth, dstHeight, srcWidth, |
| srcHeight, displayFrame); |
| // Crop - this is needed, because for sidesync, the dest fb will |
| // be in portrait orientation, so update the crop to not show the |
| // black side bands. |
| if (isOrientationPortrait(ctx)) { |
| sourceCrop = displayFrame; |
| displayFrame.left = 0; |
| displayFrame.top = 0; |
| displayFrame.right = dstWidth; |
| displayFrame.bottom = dstHeight; |
| } |
| } |
| if(ctx->dpyAttr[dpy].mMDPScalingMode) { |
| uint32_t extW = 0, extH = 0; |
| // if MDP scaling mode is enabled, map the co-ordinates to new |
| // domain(downscaled) |
| float fbWidth = (float)ctx->dpyAttr[dpy].xres; |
| float fbHeight = (float)ctx->dpyAttr[dpy].yres; |
| // query MDP configured attributes |
| if(dpy == HWC_DISPLAY_EXTERNAL) { |
| ctx->mHDMIDisplay->getAttributes(extW, extH); |
| } else if(dpy == HWC_DISPLAY_VIRTUAL) { |
| extW = ctx->mHWCVirtual->getScalingWidth(); |
| extH = ctx->mHWCVirtual->getScalingHeight(); |
| } |
| ALOGD_IF(HWC_UTILS_DEBUG, "%s: Scaling mode extW=%d extH=%d", |
| __FUNCTION__, extW, extH); |
| |
| //Calculate the ratio... |
| float wRatio = ((float)extW)/fbWidth; |
| float hRatio = ((float)extH)/fbHeight; |
| |
| //convert Dim to hwc_rect_t |
| displayFrame.left = int(wRatio*(float)displayFrame.left); |
| displayFrame.top = int(hRatio*(float)displayFrame.top); |
| displayFrame.right = int(wRatio*(float)displayFrame.right); |
| displayFrame.bottom = int(hRatio*(float)displayFrame.bottom); |
| ALOGD_IF(DEBUG_MDPDOWNSCALE, "Calculated external display frame" |
| " for MDPDownscale feature [%d %d %d %d]", |
| displayFrame.left, displayFrame.top, |
| displayFrame.right, displayFrame.bottom); |
| } |
| }else { |
| if(extOrient || ctx->dpyAttr[dpy].mMDPScalingMode) { |
| getAspectRatioPosition(ctx, dpy, extOrient, |
| displayFrame, displayFrame); |
| } |
| } |
| // If there is a external orientation set, use that |
| if(extOrient) { |
| transform = extOrient; |
| orient = static_cast<ovutils::eTransform >(extOrient); |
| } |
| // Calculate the actionsafe dimensions for External(dpy = 1 or 2) |
| getActionSafePosition(ctx, dpy, displayFrame); |
| } |
| } |
| |
| /* Returns the orientation which needs to be set on External for |
| * SideSync/Buffer Mirrormode |
| */ |
| int getMirrorModeOrientation(hwc_context_t *ctx) { |
| int extOrientation = 0; |
| int deviceOrientation = ctx->deviceOrientation; |
| if(!isPrimaryPortrait(ctx)) |
| deviceOrientation = (deviceOrientation + 1) % 4; |
| if (deviceOrientation == 0) |
| extOrientation = HWC_TRANSFORM_ROT_270; |
| else if (deviceOrientation == 1)//90 |
| extOrientation = 0; |
| else if (deviceOrientation == 2)//180 |
| extOrientation = HWC_TRANSFORM_ROT_90; |
| else if (deviceOrientation == 3)//270 |
| extOrientation = HWC_TRANSFORM_FLIP_V | HWC_TRANSFORM_FLIP_H; |
| |
| return extOrientation; |
| } |
| |
| /* Get External State names */ |
| const char* getExternalDisplayState(uint32_t external_state) { |
| static const char* externalStates[EXTERNAL_MAXSTATES] = {0}; |
| externalStates[EXTERNAL_OFFLINE] = STR(EXTERNAL_OFFLINE); |
| externalStates[EXTERNAL_ONLINE] = STR(EXTERNAL_ONLINE); |
| externalStates[EXTERNAL_PAUSE] = STR(EXTERNAL_PAUSE); |
| externalStates[EXTERNAL_RESUME] = STR(EXTERNAL_RESUME); |
| |
| if(external_state >= EXTERNAL_MAXSTATES) { |
| return "EXTERNAL_INVALID"; |
| } |
| |
| return externalStates[external_state]; |
| } |
| |
| bool isDownscaleRequired(hwc_layer_1_t const* layer) { |
| hwc_rect_t displayFrame = layer->displayFrame; |
| hwc_rect_t sourceCrop = integerizeSourceCrop(layer->sourceCropf); |
| int dst_w, dst_h, src_w, src_h; |
| dst_w = displayFrame.right - displayFrame.left; |
| dst_h = displayFrame.bottom - displayFrame.top; |
| src_w = sourceCrop.right - sourceCrop.left; |
| src_h = sourceCrop.bottom - sourceCrop.top; |
| |
| if(((src_w > dst_w) || (src_h > dst_h))) |
| return true; |
| |
| return false; |
| } |
| bool needsScaling(hwc_layer_1_t const* layer) { |
| int dst_w, dst_h, src_w, src_h; |
| hwc_rect_t displayFrame = layer->displayFrame; |
| hwc_rect_t sourceCrop = integerizeSourceCrop(layer->sourceCropf); |
| |
| dst_w = displayFrame.right - displayFrame.left; |
| dst_h = displayFrame.bottom - displayFrame.top; |
| src_w = sourceCrop.right - sourceCrop.left; |
| src_h = sourceCrop.bottom - sourceCrop.top; |
| |
| if(layer->transform & HWC_TRANSFORM_ROT_90) |
| swap(src_w, src_h); |
| |
| if(((src_w != dst_w) || (src_h != dst_h))) |
| return true; |
| |
| return false; |
| } |
| |
| // Checks if layer needs scaling with split |
| bool needsScalingWithSplit(hwc_context_t* ctx, hwc_layer_1_t const* layer, |
| const int& dpy) { |
| |
| int src_width_l, src_height_l; |
| int src_width_r, src_height_r; |
| int dst_width_l, dst_height_l; |
| int dst_width_r, dst_height_r; |
| int hw_w = ctx->dpyAttr[dpy].xres; |
| int hw_h = ctx->dpyAttr[dpy].yres; |
| hwc_rect_t cropL, dstL, cropR, dstR; |
| const int lSplit = getLeftSplit(ctx, dpy); |
| hwc_rect_t sourceCrop = integerizeSourceCrop(layer->sourceCropf); |
| hwc_rect_t displayFrame = layer->displayFrame; |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| |
| cropL = sourceCrop; |
| dstL = displayFrame; |
| hwc_rect_t scissorL = { 0, 0, lSplit, hw_h }; |
| scissorL = getIntersection(ctx->mViewFrame[dpy], scissorL); |
| qhwc::calculate_crop_rects(cropL, dstL, scissorL, 0); |
| |
| cropR = sourceCrop; |
| dstR = displayFrame; |
| hwc_rect_t scissorR = { lSplit, 0, hw_w, hw_h }; |
| scissorR = getIntersection(ctx->mViewFrame[dpy], scissorR); |
| qhwc::calculate_crop_rects(cropR, dstR, scissorR, 0); |
| |
| // Sanitize Crop to stitch |
| sanitizeSourceCrop(cropL, cropR, hnd); |
| |
| // Calculate the left dst |
| dst_width_l = dstL.right - dstL.left; |
| dst_height_l = dstL.bottom - dstL.top; |
| src_width_l = cropL.right - cropL.left; |
| src_height_l = cropL.bottom - cropL.top; |
| |
| // check if there is any scaling on the left |
| if(((src_width_l != dst_width_l) || (src_height_l != dst_height_l))) |
| return true; |
| |
| // Calculate the right dst |
| dst_width_r = dstR.right - dstR.left; |
| dst_height_r = dstR.bottom - dstR.top; |
| src_width_r = cropR.right - cropR.left; |
| src_height_r = cropR.bottom - cropR.top; |
| |
| // check if there is any scaling on the right |
| if(((src_width_r != dst_width_r) || (src_height_r != dst_height_r))) |
| return true; |
| |
| return false; |
| } |
| |
| bool isAlphaScaled(hwc_layer_1_t const* layer) { |
| if(needsScaling(layer) && isAlphaPresent(layer)) { |
| return true; |
| } |
| return false; |
| } |
| |
| bool isAlphaPresent(hwc_layer_1_t const* layer) { |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| if(hnd) { |
| int format = hnd->format; |
| switch(format) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| // In any more formats with Alpha go here.. |
| return true; |
| default : return false; |
| } |
| } |
| return false; |
| } |
| |
| static void trimLayer(hwc_context_t *ctx, const int& dpy, const int& transform, |
| hwc_rect_t& crop, hwc_rect_t& dst) { |
| int hw_w = ctx->dpyAttr[dpy].xres; |
| int hw_h = ctx->dpyAttr[dpy].yres; |
| if(dst.left < 0 || dst.top < 0 || |
| dst.right > hw_w || dst.bottom > hw_h) { |
| hwc_rect_t scissor = {0, 0, hw_w, hw_h }; |
| scissor = getIntersection(ctx->mViewFrame[dpy], scissor); |
| qhwc::calculate_crop_rects(crop, dst, scissor, transform); |
| } |
| } |
| |
| static void trimList(hwc_context_t *ctx, hwc_display_contents_1_t *list, |
| const int& dpy) { |
| for(uint32_t i = 0; i < list->numHwLayers - 1; i++) { |
| hwc_layer_1_t *layer = &list->hwLayers[i]; |
| hwc_rect_t crop = integerizeSourceCrop(layer->sourceCropf); |
| int transform = (list->hwLayers[i].flags & HWC_COLOR_FILL) ? 0 : |
| list->hwLayers[i].transform; |
| trimLayer(ctx, dpy, |
| transform, |
| (hwc_rect_t&)crop, |
| (hwc_rect_t&)list->hwLayers[i].displayFrame); |
| layer->sourceCropf.left = (float)crop.left; |
| layer->sourceCropf.right = (float)crop.right; |
| layer->sourceCropf.top = (float)crop.top; |
| layer->sourceCropf.bottom = (float)crop.bottom; |
| } |
| } |
| |
| void setListStats(hwc_context_t *ctx, |
| hwc_display_contents_1_t *list, int dpy) { |
| const int prevYuvCount = ctx->listStats[dpy].yuvCount; |
| memset(&ctx->listStats[dpy], 0, sizeof(ListStats)); |
| ctx->listStats[dpy].numAppLayers = (int)list->numHwLayers - 1; |
| ctx->listStats[dpy].fbLayerIndex = (int)list->numHwLayers - 1; |
| ctx->listStats[dpy].skipCount = 0; |
| ctx->listStats[dpy].preMultipliedAlpha = false; |
| ctx->listStats[dpy].isSecurePresent = false; |
| ctx->listStats[dpy].yuvCount = 0; |
| char property[PROPERTY_VALUE_MAX]; |
| ctx->listStats[dpy].isDisplayAnimating = false; |
| ctx->listStats[dpy].secureUI = false; |
| ctx->listStats[dpy].yuv4k2kCount = 0; |
| ctx->dpyAttr[dpy].mActionSafePresent = isActionSafePresent(ctx, dpy); |
| ctx->listStats[dpy].renderBufIndexforABC = -1; |
| ctx->listStats[dpy].secureRGBCount = 0; |
| ctx->listStats[dpy].refreshRateRequest = ctx->dpyAttr[dpy].refreshRate; |
| uint32_t refreshRate = 0; |
| qdutils::MDPVersion& mdpHw = qdutils::MDPVersion::getInstance(); |
| |
| ctx->listStats[dpy].mAIVVideoMode = false; |
| resetROI(ctx, dpy); |
| |
| trimList(ctx, list, dpy); |
| optimizeLayerRects(list); |
| for (size_t i = 0; i < (size_t)ctx->listStats[dpy].numAppLayers; i++) { |
| hwc_layer_1_t const* layer = &list->hwLayers[i]; |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| |
| #ifdef QCOM_BSP |
| // Window boxing feature is applicable obly for external display, So |
| // enable mAIVVideoMode only for external display |
| if(ctx->mWindowboxFeature && dpy && isAIVVideoLayer(layer)) { |
| ctx->listStats[dpy].mAIVVideoMode = true; |
| } |
| if (layer->flags & HWC_SCREENSHOT_ANIMATOR_LAYER) { |
| ctx->listStats[dpy].isDisplayAnimating = true; |
| } |
| if(isSecureDisplayBuffer(hnd)) { |
| ctx->listStats[dpy].secureUI = true; |
| } |
| #endif |
| // continue if number of app layers exceeds MAX_NUM_APP_LAYERS |
| if(ctx->listStats[dpy].numAppLayers > MAX_NUM_APP_LAYERS) |
| continue; |
| |
| //reset yuv indices |
| ctx->listStats[dpy].yuvIndices[i] = -1; |
| ctx->listStats[dpy].yuv4k2kIndices[i] = -1; |
| |
| if (isSecureBuffer(hnd)) { |
| ctx->listStats[dpy].isSecurePresent = true; |
| if(not isYuvBuffer(hnd)) { |
| // cache secureRGB layer parameters like we cache for YUV layers |
| int& secureRGBCount = ctx->listStats[dpy].secureRGBCount; |
| ctx->listStats[dpy].secureRGBIndices[secureRGBCount] = (int)i; |
| secureRGBCount++; |
| } |
| } |
| |
| if (isSkipLayer(&list->hwLayers[i])) { |
| ctx->listStats[dpy].skipCount++; |
| } |
| |
| if (UNLIKELY(isYuvBuffer(hnd))) { |
| int& yuvCount = ctx->listStats[dpy].yuvCount; |
| ctx->listStats[dpy].yuvIndices[yuvCount] = (int)i; |
| yuvCount++; |
| |
| if(UNLIKELY(isYUVSplitNeeded(hnd))){ |
| int& yuv4k2kCount = ctx->listStats[dpy].yuv4k2kCount; |
| ctx->listStats[dpy].yuv4k2kIndices[yuv4k2kCount] = (int)i; |
| yuv4k2kCount++; |
| } |
| } |
| if(layer->blending == HWC_BLENDING_PREMULT) |
| ctx->listStats[dpy].preMultipliedAlpha = true; |
| |
| #ifdef DYNAMIC_FPS |
| if (!dpy && mdpHw.isDynFpsSupported() && ctx->mUseMetaDataRefreshRate){ |
| //dyn fps: get refreshrate from metadata |
| //Support multiple refresh rates if they are same |
| //else set to default |
| MetaData_t *mdata = hnd ? (MetaData_t *)hnd->base_metadata : NULL; |
| if (mdata && (mdata->operation & UPDATE_REFRESH_RATE)) { |
| // Valid refreshRate in metadata and within the range |
| uint32_t rate = roundOff(mdata->refreshrate); |
| if((rate >= mdpHw.getMinFpsSupported() && |
| rate <= mdpHw.getMaxFpsSupported())) { |
| if (!refreshRate) { |
| refreshRate = rate; |
| } else if(refreshRate != rate) { |
| // multiple refreshrate requests, set to default |
| refreshRate = ctx->dpyAttr[dpy].refreshRate; |
| } |
| } |
| } |
| } |
| #endif |
| } |
| if(ctx->listStats[dpy].yuvCount > 0) { |
| if (property_get("hw.cabl.yuv", property, NULL) > 0) { |
| if (atoi(property) != 1) { |
| property_set("hw.cabl.yuv", "1"); |
| } |
| } |
| } else { |
| if (property_get("hw.cabl.yuv", property, NULL) > 0) { |
| if (atoi(property) != 0) { |
| property_set("hw.cabl.yuv", "0"); |
| } |
| } |
| } |
| |
| //The marking of video begin/end is useful on some targets where we need |
| //to have a padding round to be able to shift pipes across mixers. |
| if(prevYuvCount != ctx->listStats[dpy].yuvCount) { |
| ctx->mVideoTransFlag = true; |
| } |
| |
| if(dpy == HWC_DISPLAY_PRIMARY) { |
| ctx->mAD->markDoable(ctx, list); |
| //Store the requested fresh rate |
| ctx->listStats[dpy].refreshRateRequest = refreshRate ? |
| refreshRate : ctx->dpyAttr[dpy].refreshRate; |
| } |
| } |
| |
| |
| static void calc_cut(double& leftCutRatio, double& topCutRatio, |
| double& rightCutRatio, double& bottomCutRatio, int orient) { |
| if(orient & HAL_TRANSFORM_FLIP_H) { |
| swap(leftCutRatio, rightCutRatio); |
| } |
| if(orient & HAL_TRANSFORM_FLIP_V) { |
| swap(topCutRatio, bottomCutRatio); |
| } |
| if(orient & HAL_TRANSFORM_ROT_90) { |
| //Anti clock swapping |
| double tmpCutRatio = leftCutRatio; |
| leftCutRatio = topCutRatio; |
| topCutRatio = rightCutRatio; |
| rightCutRatio = bottomCutRatio; |
| bottomCutRatio = tmpCutRatio; |
| } |
| } |
| |
| bool isSecuring(hwc_context_t* ctx, hwc_layer_1_t const* layer) { |
| if((ctx->mMDP.version < qdutils::MDSS_V5) && |
| (ctx->mMDP.version > qdutils::MDP_V3_0) && |
| ctx->mSecuring) { |
| return true; |
| } |
| if (isSecureModePolicy(ctx->mMDP.version)) { |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| if(ctx->mSecureMode) { |
| if (! isSecureBuffer(hnd)) { |
| ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning ON ...", |
| __FUNCTION__); |
| return true; |
| } |
| } else { |
| if (isSecureBuffer(hnd)) { |
| ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning OFF ...", |
| __FUNCTION__); |
| return true; |
| } |
| } |
| } |
| return false; |
| } |
| |
| bool isSecureModePolicy(int mdpVersion) { |
| if (mdpVersion < qdutils::MDSS_V5) |
| return true; |
| else |
| return false; |
| } |
| |
| bool isRotatorSupportedFormat(private_handle_t *hnd) { |
| // Following rotator src formats are supported by mdp driver |
| // TODO: Add more formats in future, if mdp driver adds support |
| if(hnd != NULL) { |
| switch(hnd->format) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_RGBA_5551: |
| case HAL_PIXEL_FORMAT_RGBA_4444: |
| case HAL_PIXEL_FORMAT_RGB_565: |
| case HAL_PIXEL_FORMAT_RGB_888: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| return true; |
| default: |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| bool isRotationDoable(hwc_context_t *ctx, private_handle_t *hnd) { |
| // Rotate layers, if it is not secure display buffer and not |
| // for the MDP versions below MDP5 |
| if((!isSecureDisplayBuffer(hnd) && isRotatorSupportedFormat(hnd) && |
| !ctx->mMDP.version < qdutils::MDSS_V5) |
| || isYuvBuffer(hnd)) { |
| return true; |
| } |
| return false; |
| } |
| |
| // returns true if Action safe dimensions are set and target supports Actionsafe |
| bool isActionSafePresent(hwc_context_t *ctx, int dpy) { |
| // if external supports underscan, do nothing |
| // it will be taken care in the driver |
| // Disable Action safe for 8974 due to HW limitation for downscaling |
| // layers with overlapped region |
| // Disable Actionsafe for non HDMI displays. |
| if(!(dpy == HWC_DISPLAY_EXTERNAL) || |
| qdutils::MDPVersion::getInstance().is8x74v2() || |
| ctx->mHDMIDisplay->isCEUnderscanSupported()) { |
| return false; |
| } |
| |
| char value[PROPERTY_VALUE_MAX]; |
| // Read action safe properties |
| property_get("persist.sys.actionsafe.width", value, "0"); |
| ctx->dpyAttr[dpy].mAsWidthRatio = atoi(value); |
| property_get("persist.sys.actionsafe.height", value, "0"); |
| ctx->dpyAttr[dpy].mAsHeightRatio = atoi(value); |
| |
| if(!ctx->dpyAttr[dpy].mAsWidthRatio && !ctx->dpyAttr[dpy].mAsHeightRatio) { |
| //No action safe ratio set, return |
| return false; |
| } |
| return true; |
| } |
| |
| int getBlending(int blending) { |
| switch(blending) { |
| case HWC_BLENDING_NONE: |
| return overlay::utils::OVERLAY_BLENDING_OPAQUE; |
| case HWC_BLENDING_PREMULT: |
| return overlay::utils::OVERLAY_BLENDING_PREMULT; |
| case HWC_BLENDING_COVERAGE : |
| default: |
| return overlay::utils::OVERLAY_BLENDING_COVERAGE; |
| } |
| } |
| |
| //Crops source buffer against destination and FB boundaries |
| void calculate_crop_rects(hwc_rect_t& crop, hwc_rect_t& dst, |
| const hwc_rect_t& scissor, int orient) { |
| |
| int& crop_l = crop.left; |
| int& crop_t = crop.top; |
| int& crop_r = crop.right; |
| int& crop_b = crop.bottom; |
| int crop_w = crop.right - crop.left; |
| int crop_h = crop.bottom - crop.top; |
| |
| int& dst_l = dst.left; |
| int& dst_t = dst.top; |
| int& dst_r = dst.right; |
| int& dst_b = dst.bottom; |
| int dst_w = abs(dst.right - dst.left); |
| int dst_h = abs(dst.bottom - dst.top); |
| |
| const int& sci_l = scissor.left; |
| const int& sci_t = scissor.top; |
| const int& sci_r = scissor.right; |
| const int& sci_b = scissor.bottom; |
| |
| double leftCutRatio = 0.0, rightCutRatio = 0.0, topCutRatio = 0.0, |
| bottomCutRatio = 0.0; |
| |
| if(dst_l < sci_l) { |
| leftCutRatio = (double)(sci_l - dst_l) / (double)dst_w; |
| dst_l = sci_l; |
| } |
| |
| if(dst_r > sci_r) { |
| rightCutRatio = (double)(dst_r - sci_r) / (double)dst_w; |
| dst_r = sci_r; |
| } |
| |
| if(dst_t < sci_t) { |
| topCutRatio = (double)(sci_t - dst_t) / (double)dst_h; |
| dst_t = sci_t; |
| } |
| |
| if(dst_b > sci_b) { |
| bottomCutRatio = (double)(dst_b - sci_b) / (double)dst_h; |
| dst_b = sci_b; |
| } |
| |
| calc_cut(leftCutRatio, topCutRatio, rightCutRatio, bottomCutRatio, orient); |
| crop_l += (int)round((double)crop_w * leftCutRatio); |
| crop_t += (int)round((double)crop_h * topCutRatio); |
| crop_r -= (int)round((double)crop_w * rightCutRatio); |
| crop_b -= (int)round((double)crop_h * bottomCutRatio); |
| } |
| |
| bool areLayersIntersecting(const hwc_layer_1_t* layer1, |
| const hwc_layer_1_t* layer2) { |
| hwc_rect_t irect = getIntersection(layer1->displayFrame, |
| layer2->displayFrame); |
| return isValidRect(irect); |
| } |
| |
| bool isSameRect(const hwc_rect& rect1, const hwc_rect& rect2) |
| { |
| return ((rect1.left == rect2.left) && (rect1.top == rect2.top) && |
| (rect1.right == rect2.right) && (rect1.bottom == rect2.bottom)); |
| } |
| |
| bool isValidRect(const hwc_rect& rect) |
| { |
| return ((rect.bottom > rect.top) && (rect.right > rect.left)) ; |
| } |
| |
| bool operator ==(const hwc_rect_t& lhs, const hwc_rect_t& rhs) { |
| if(lhs.left == rhs.left && lhs.top == rhs.top && |
| lhs.right == rhs.right && lhs.bottom == rhs.bottom ) |
| return true ; |
| return false; |
| } |
| |
| hwc_rect_t moveRect(const hwc_rect_t& rect, const int& x_off, const int& y_off) |
| { |
| hwc_rect_t res; |
| |
| if(!isValidRect(rect)) |
| return (hwc_rect_t){0, 0, 0, 0}; |
| |
| res.left = rect.left + x_off; |
| res.top = rect.top + y_off; |
| res.right = rect.right + x_off; |
| res.bottom = rect.bottom + y_off; |
| |
| return res; |
| } |
| |
| /* computes the intersection of two rects */ |
| hwc_rect_t getIntersection(const hwc_rect_t& rect1, const hwc_rect_t& rect2) |
| { |
| hwc_rect_t res; |
| |
| if(!isValidRect(rect1) || !isValidRect(rect2)){ |
| return (hwc_rect_t){0, 0, 0, 0}; |
| } |
| |
| |
| res.left = max(rect1.left, rect2.left); |
| res.top = max(rect1.top, rect2.top); |
| res.right = min(rect1.right, rect2.right); |
| res.bottom = min(rect1.bottom, rect2.bottom); |
| |
| if(!isValidRect(res)) |
| return (hwc_rect_t){0, 0, 0, 0}; |
| |
| return res; |
| } |
| |
| /* computes the union of two rects */ |
| hwc_rect_t getUnion(const hwc_rect &rect1, const hwc_rect &rect2) |
| { |
| hwc_rect_t res; |
| |
| if(!isValidRect(rect1)){ |
| return rect2; |
| } |
| |
| if(!isValidRect(rect2)){ |
| return rect1; |
| } |
| |
| res.left = min(rect1.left, rect2.left); |
| res.top = min(rect1.top, rect2.top); |
| res.right = max(rect1.right, rect2.right); |
| res.bottom = max(rect1.bottom, rect2.bottom); |
| |
| return res; |
| } |
| |
| /* Not a geometrical rect deduction. Deducts rect2 from rect1 only if it results |
| * a single rect */ |
| hwc_rect_t deductRect(const hwc_rect_t& rect1, const hwc_rect_t& rect2) { |
| |
| hwc_rect_t res = rect1; |
| |
| if((rect1.left == rect2.left) && (rect1.right == rect2.right)) { |
| if((rect1.top == rect2.top) && (rect2.bottom <= rect1.bottom)) |
| res.top = rect2.bottom; |
| else if((rect1.bottom == rect2.bottom)&& (rect2.top >= rect1.top)) |
| res.bottom = rect2.top; |
| } |
| else if((rect1.top == rect2.top) && (rect1.bottom == rect2.bottom)) { |
| if((rect1.left == rect2.left) && (rect2.right <= rect1.right)) |
| res.left = rect2.right; |
| else if((rect1.right == rect2.right)&& (rect2.left >= rect1.left)) |
| res.right = rect2.left; |
| } |
| return res; |
| } |
| |
| void optimizeLayerRects(const hwc_display_contents_1_t *list) { |
| int i= (int)list->numHwLayers-2; |
| while(i > 0) { |
| //see if there is no blending required. |
| //If it is opaque see if we can substract this region from below |
| //layers. |
| if(list->hwLayers[i].blending == HWC_BLENDING_NONE && |
| list->hwLayers[i].planeAlpha == 0xFF) { |
| int j= i-1; |
| hwc_rect_t& topframe = |
| (hwc_rect_t&)list->hwLayers[i].displayFrame; |
| while(j >= 0) { |
| if(!needsScaling(&list->hwLayers[j])) { |
| hwc_layer_1_t* layer = (hwc_layer_1_t*)&list->hwLayers[j]; |
| hwc_rect_t& bottomframe = layer->displayFrame; |
| hwc_rect_t bottomCrop = |
| integerizeSourceCrop(layer->sourceCropf); |
| int transform = (layer->flags & HWC_COLOR_FILL) ? 0 : |
| layer->transform; |
| |
| hwc_rect_t irect = getIntersection(bottomframe, topframe); |
| if(isValidRect(irect)) { |
| hwc_rect_t dest_rect; |
| //if intersection is valid rect, deduct it |
| dest_rect = deductRect(bottomframe, irect); |
| qhwc::calculate_crop_rects(bottomCrop, bottomframe, |
| dest_rect, transform); |
| //Update layer sourceCropf |
| layer->sourceCropf.left =(float)bottomCrop.left; |
| layer->sourceCropf.top = (float)bottomCrop.top; |
| layer->sourceCropf.right = (float)bottomCrop.right; |
| layer->sourceCropf.bottom = (float)bottomCrop.bottom; |
| #ifdef QCOM_BSP |
| //Update layer dirtyRect |
| layer->dirtyRect = getIntersection(bottomCrop, |
| layer->dirtyRect); |
| #endif |
| } |
| } |
| j--; |
| } |
| } |
| i--; |
| } |
| } |
| |
| void getNonWormholeRegion(hwc_display_contents_1_t* list, |
| hwc_rect_t& nwr) |
| { |
| size_t last = list->numHwLayers - 1; |
| hwc_rect_t fbDisplayFrame = list->hwLayers[last].displayFrame; |
| //Initiliaze nwr to first frame |
| nwr.left = list->hwLayers[0].displayFrame.left; |
| nwr.top = list->hwLayers[0].displayFrame.top; |
| nwr.right = list->hwLayers[0].displayFrame.right; |
| nwr.bottom = list->hwLayers[0].displayFrame.bottom; |
| |
| for (size_t i = 1; i < last; i++) { |
| hwc_rect_t displayFrame = list->hwLayers[i].displayFrame; |
| nwr = getUnion(nwr, displayFrame); |
| } |
| |
| //Intersect with the framebuffer |
| nwr = getIntersection(nwr, fbDisplayFrame); |
| } |
| |
| void closeAcquireFds(hwc_display_contents_1_t* list) { |
| if(LIKELY(list)) { |
| for(uint32_t i = 0; i < list->numHwLayers; i++) { |
| //Close the acquireFenceFds |
| //HWC_FRAMEBUFFER are -1 already by SF, rest we close. |
| if(list->hwLayers[i].acquireFenceFd >= 0) { |
| close(list->hwLayers[i].acquireFenceFd); |
| list->hwLayers[i].acquireFenceFd = -1; |
| } |
| } |
| //Writeback |
| if(list->outbufAcquireFenceFd >= 0) { |
| close(list->outbufAcquireFenceFd); |
| list->outbufAcquireFenceFd = -1; |
| } |
| } |
| } |
| |
| int hwc_sync(hwc_context_t *ctx, hwc_display_contents_1_t* list, int dpy, |
| int fd) { |
| ATRACE_CALL(); |
| int ret = 0; |
| int acquireFd[MAX_NUM_APP_LAYERS]; |
| int count = 0; |
| int releaseFd = -1; |
| int retireFd = -1; |
| int fbFd = -1; |
| bool swapzero = false; |
| |
| struct mdp_buf_sync data; |
| memset(&data, 0, sizeof(data)); |
| data.acq_fen_fd = acquireFd; |
| data.rel_fen_fd = &releaseFd; |
| data.retire_fen_fd = &retireFd; |
| data.flags = MDP_BUF_SYNC_FLAG_RETIRE_FENCE; |
| |
| char property[PROPERTY_VALUE_MAX]; |
| if(property_get("debug.egl.swapinterval", property, "1") > 0) { |
| if(atoi(property) == 0) |
| swapzero = true; |
| } |
| |
| bool isExtAnimating = false; |
| if(dpy) |
| isExtAnimating = ctx->listStats[dpy].isDisplayAnimating; |
| |
| //Send acquireFenceFds to rotator |
| for(uint32_t i = 0; i < ctx->mLayerRotMap[dpy]->getCount(); i++) { |
| int rotFd = ctx->mRotMgr->getRotDevFd(); |
| int rotReleaseFd = -1; |
| overlay::Rotator* currRot = ctx->mLayerRotMap[dpy]->getRot(i); |
| hwc_layer_1_t* currLayer = ctx->mLayerRotMap[dpy]->getLayer(i); |
| if((currRot == NULL) || (currLayer == NULL)) { |
| continue; |
| } |
| struct mdp_buf_sync rotData; |
| memset(&rotData, 0, sizeof(rotData)); |
| rotData.acq_fen_fd = |
| &currLayer->acquireFenceFd; |
| rotData.rel_fen_fd = &rotReleaseFd; //driver to populate this |
| rotData.session_id = currRot->getSessId(); |
| if(currLayer->acquireFenceFd >= 0) { |
| rotData.acq_fen_fd_cnt = 1; //1 ioctl call per rot session |
| } |
| int ret = 0; |
| if(LIKELY(!swapzero) and (not ctx->mLayerRotMap[dpy]->isRotCached(i))) |
| ret = ioctl(rotFd, MSMFB_BUFFER_SYNC, &rotData); |
| |
| if(ret < 0) { |
| ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed for rot sync, err=%s", |
| __FUNCTION__, strerror(errno)); |
| close(rotReleaseFd); |
| } else { |
| close(currLayer->acquireFenceFd); |
| //For MDP to wait on. |
| currLayer->acquireFenceFd = |
| dup(rotReleaseFd); |
| //A buffer is free to be used by producer as soon as its copied to |
| //rotator |
| currLayer->releaseFenceFd = |
| rotReleaseFd; |
| } |
| } |
| |
| //Accumulate acquireFenceFds for MDP Overlays |
| if(list->outbufAcquireFenceFd >= 0) { |
| //Writeback output buffer |
| if(LIKELY(!swapzero) ) |
| acquireFd[count++] = list->outbufAcquireFenceFd; |
| } |
| |
| for(uint32_t i = 0; i < list->numHwLayers; i++) { |
| if(((isAbcInUse(ctx)== true ) || |
| (list->hwLayers[i].compositionType == HWC_OVERLAY)) && |
| list->hwLayers[i].acquireFenceFd >= 0) { |
| if(LIKELY(!swapzero) ) { |
| // if ABC is enabled for more than one layer. |
| // renderBufIndexforABC will work as FB.Hence |
| // set the acquireFD from fd - which is coming from copybit |
| if(fd >= 0 && (isAbcInUse(ctx) == true)) { |
| if(ctx->listStats[dpy].renderBufIndexforABC ==(int32_t)i) |
| acquireFd[count++] = fd; |
| else |
| continue; |
| } else |
| acquireFd[count++] = list->hwLayers[i].acquireFenceFd; |
| } |
| } |
| if(list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { |
| if(LIKELY(!swapzero) ) { |
| if(fd >= 0) { |
| //set the acquireFD from fd - which is coming from c2d |
| acquireFd[count++] = fd; |
| // Buffer sync IOCTL should be async when using c2d fence is |
| // used |
| data.flags &= ~MDP_BUF_SYNC_FLAG_WAIT; |
| } else if(list->hwLayers[i].acquireFenceFd >= 0) |
| acquireFd[count++] = list->hwLayers[i].acquireFenceFd; |
| } |
| } |
| } |
| |
| if ((fd >= 0) && !dpy && ctx->mPtorInfo.isActive()) { |
| // Acquire c2d fence of Overlap render buffer |
| if(LIKELY(!swapzero) ) |
| acquireFd[count++] = fd; |
| } |
| |
| data.acq_fen_fd_cnt = count; |
| fbFd = ctx->dpyAttr[dpy].fd; |
| |
| //Waits for acquire fences, returns a release fence |
| if(LIKELY(!swapzero)) { |
| ret = ioctl(fbFd, MSMFB_BUFFER_SYNC, &data); |
| } |
| |
| if(ret < 0) { |
| ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed, err=%s", |
| __FUNCTION__, strerror(errno)); |
| ALOGE("%s: acq_fen_fd_cnt=%d flags=%d fd=%d dpy=%d numHwLayers=%zu", |
| __FUNCTION__, data.acq_fen_fd_cnt, data.flags, fbFd, |
| dpy, list->numHwLayers); |
| close(releaseFd); |
| releaseFd = -1; |
| close(retireFd); |
| retireFd = -1; |
| } |
| |
| for(uint32_t i = 0; i < list->numHwLayers; i++) { |
| if(list->hwLayers[i].compositionType == HWC_OVERLAY || |
| #ifdef QCOM_BSP |
| list->hwLayers[i].compositionType == HWC_BLIT || |
| #endif |
| list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { |
| //Populate releaseFenceFds. |
| if(UNLIKELY(swapzero)) { |
| list->hwLayers[i].releaseFenceFd = -1; |
| } else if(isExtAnimating) { |
| // Release all the app layer fds immediately, |
| // if animation is in progress. |
| list->hwLayers[i].releaseFenceFd = -1; |
| } else if(list->hwLayers[i].releaseFenceFd < 0 ) { |
| #ifdef QCOM_BSP |
| //If rotator has not already populated this field |
| // & if it's a not VPU layer |
| |
| // if ABC is enabled for more than one layer |
| if(fd >= 0 && (isAbcInUse(ctx) == true) && |
| ctx->listStats[dpy].renderBufIndexforABC !=(int32_t)i){ |
| list->hwLayers[i].releaseFenceFd = dup(fd); |
| } else if((list->hwLayers[i].compositionType == HWC_BLIT)&& |
| (isAbcInUse(ctx) == false)){ |
| //For Blit, the app layers should be released when the Blit |
| //is complete. This fd was passed from copybit->draw |
| list->hwLayers[i].releaseFenceFd = dup(fd); |
| } else |
| #endif |
| { |
| list->hwLayers[i].releaseFenceFd = dup(releaseFd); |
| } |
| } |
| } |
| } |
| |
| if(fd >= 0) { |
| close(fd); |
| fd = -1; |
| } |
| |
| if (ctx->mCopyBit[dpy]) { |
| if (!dpy && ctx->mPtorInfo.isActive()) |
| ctx->mCopyBit[dpy]->setReleaseFdSync(releaseFd); |
| else |
| ctx->mCopyBit[dpy]->setReleaseFd(releaseFd); |
| } |
| |
| //Signals when MDP finishes reading rotator buffers. |
| ctx->mLayerRotMap[dpy]->setReleaseFd(releaseFd); |
| close(releaseFd); |
| releaseFd = -1; |
| |
| if(UNLIKELY(swapzero)) { |
| list->retireFenceFd = -1; |
| } else { |
| list->retireFenceFd = retireFd; |
| } |
| return ret; |
| } |
| |
| void setMdpFlags(hwc_context_t *ctx, hwc_layer_1_t *layer, |
| ovutils::eMdpFlags &mdpFlags, |
| int rotDownscale, int transform) { |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| MetaData_t *metadata = hnd ? (MetaData_t *)hnd->base_metadata : NULL; |
| |
| if(layer->blending == HWC_BLENDING_PREMULT) { |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_BLEND_FG_PREMULT); |
| } |
| |
| if(metadata && (metadata->operation & PP_PARAM_INTERLACED) && |
| metadata->interlaced) { |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_DEINTERLACE); |
| } |
| |
| // Mark MDP flags with SECURE_OVERLAY_SESSION for driver |
| if(isSecureBuffer(hnd)) { |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_SECURE_OVERLAY_SESSION); |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_SMP_FORCE_ALLOC); |
| } |
| |
| if(isProtectedBuffer(hnd)) { |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_SMP_FORCE_ALLOC); |
| } |
| |
| if(isSecureDisplayBuffer(hnd)) { |
| // Mark MDP flags with SECURE_DISPLAY_OVERLAY_SESSION for driver |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_SECURE_DISPLAY_OVERLAY_SESSION); |
| } |
| |
| //Pre-rotation will be used using rotator. |
| if(has90Transform(layer) && isRotationDoable(ctx, hnd)) { |
| ovutils::setMdpFlags(mdpFlags, |
| ovutils::OV_MDP_SOURCE_ROTATED_90); |
| } |
| //No 90 component and no rot-downscale then flips done by MDP |
| //If we use rot then it might as well do flips |
| if(!(transform & HWC_TRANSFORM_ROT_90) && !rotDownscale) { |
| if(transform & HWC_TRANSFORM_FLIP_H) { |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_H); |
| } |
| |
| if(transform & HWC_TRANSFORM_FLIP_V) { |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_V); |
| } |
| } |
| |
| if(metadata && |
| ((metadata->operation & PP_PARAM_HSIC) |
| || (metadata->operation & PP_PARAM_IGC) |
| || (metadata->operation & PP_PARAM_SHARP2))) { |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_PP_EN); |
| } |
| } |
| |
| int configRotator(Rotator *rot, Whf& whf, |
| hwc_rect_t& crop, const eMdpFlags& mdpFlags, |
| const eTransform& orient, const int& downscale) { |
| |
| // Fix alignments for TILED format |
| if(whf.format == MDP_Y_CRCB_H2V2_TILE || |
| whf.format == MDP_Y_CBCR_H2V2_TILE) { |
| whf.w = utils::alignup(whf.w, 64); |
| whf.h = utils::alignup(whf.h, 32); |
| } |
| rot->setSource(whf); |
| |
| if (qdutils::MDPVersion::getInstance().getMDPVersion() >= |
| qdutils::MDSS_V5) { |
| Dim rotCrop(crop.left, crop.top, crop.right - crop.left, |
| crop.bottom - crop.top); |
| rot->setCrop(rotCrop); |
| } |
| |
| rot->setFlags(mdpFlags); |
| rot->setTransform(orient); |
| rot->setDownscale(downscale); |
| if(!rot->commit()) return -1; |
| return 0; |
| } |
| |
| int configMdp(Overlay *ov, const PipeArgs& parg, |
| const eTransform& orient, const hwc_rect_t& crop, |
| const hwc_rect_t& pos, const MetaData_t *metadata, |
| const eDest& dest) { |
| ov->setSource(parg, dest); |
| ov->setTransform(orient, dest); |
| |
| int crop_w = crop.right - crop.left; |
| int crop_h = crop.bottom - crop.top; |
| Dim dcrop(crop.left, crop.top, crop_w, crop_h); |
| ov->setCrop(dcrop, dest); |
| |
| int posW = pos.right - pos.left; |
| int posH = pos.bottom - pos.top; |
| Dim position(pos.left, pos.top, posW, posH); |
| ov->setPosition(position, dest); |
| |
| if (metadata) |
| ov->setVisualParams(*metadata, dest); |
| |
| if (!ov->commit(dest)) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| int configColorLayer(hwc_context_t *ctx, hwc_layer_1_t *layer, |
| const int& dpy, eMdpFlags& mdpFlags, eZorder& z, |
| const eDest& dest) { |
| |
| hwc_rect_t dst = layer->displayFrame; |
| trimLayer(ctx, dpy, 0, dst, dst); |
| |
| int w = ctx->dpyAttr[dpy].xres; |
| int h = ctx->dpyAttr[dpy].yres; |
| int dst_w = dst.right - dst.left; |
| int dst_h = dst.bottom - dst.top; |
| uint32_t color = layer->transform; |
| Whf whf(w, h, getMdpFormat(HAL_PIXEL_FORMAT_RGBA_8888)); |
| |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_SOLID_FILL); |
| if (layer->blending == HWC_BLENDING_PREMULT) |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_BLEND_FG_PREMULT); |
| |
| PipeArgs parg(mdpFlags, whf, z, static_cast<eRotFlags>(0), |
| layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| |
| // Configure MDP pipe for Color layer |
| Dim pos(dst.left, dst.top, dst_w, dst_h); |
| ctx->mOverlay->setSource(parg, dest); |
| ctx->mOverlay->setColor(color, dest); |
| ctx->mOverlay->setTransform(0, dest); |
| ctx->mOverlay->setCrop(pos, dest); |
| ctx->mOverlay->setPosition(pos, dest); |
| |
| if (!ctx->mOverlay->commit(dest)) { |
| ALOGE("%s: Configure color layer failed!", __FUNCTION__); |
| return -1; |
| } |
| return 0; |
| } |
| |
| void updateSource(eTransform& orient, Whf& whf, |
| hwc_rect_t& crop, Rotator *rot) { |
| Dim transformedCrop(crop.left, crop.top, |
| crop.right - crop.left, |
| crop.bottom - crop.top); |
| if (qdutils::MDPVersion::getInstance().getMDPVersion() >= |
| qdutils::MDSS_V5) { |
| //B-family rotator internally could modify destination dimensions if |
| //downscaling is supported |
| whf = rot->getDstWhf(); |
| transformedCrop = rot->getDstDimensions(); |
| } else { |
| //A-family rotator rotates entire buffer irrespective of crop, forcing |
| //us to recompute the crop based on transform |
| orient = static_cast<eTransform>(ovutils::getMdpOrient(orient)); |
| preRotateSource(orient, whf, transformedCrop); |
| } |
| |
| crop.left = transformedCrop.x; |
| crop.top = transformedCrop.y; |
| crop.right = transformedCrop.x + transformedCrop.w; |
| crop.bottom = transformedCrop.y + transformedCrop.h; |
| } |
| |
| int getRotDownscale(hwc_context_t *ctx, const hwc_layer_1_t *layer) { |
| if(not qdutils::MDPVersion::getInstance().isRotDownscaleEnabled()) { |
| return 0; |
| } |
| |
| int downscale = 0; |
| hwc_rect_t crop = integerizeSourceCrop(layer->sourceCropf); |
| hwc_rect_t dst = layer->displayFrame; |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| |
| if(not hnd) { |
| return 0; |
| } |
| |
| MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; |
| bool isInterlaced = metadata && (metadata->operation & PP_PARAM_INTERLACED) |
| && metadata->interlaced; |
| int transform = layer->transform; |
| uint32_t format = ovutils::getMdpFormat(hnd->format, hnd->flags); |
| |
| if(isYuvBuffer(hnd)) { |
| if(ctx->mMDP.version >= qdutils::MDP_V4_2 && |
| ctx->mMDP.version < qdutils::MDSS_V5) { |
| downscale = Rotator::getDownscaleFactor(crop.right - crop.left, |
| crop.bottom - crop.top, dst.right - dst.left, |
| dst.bottom - dst.top, format, isInterlaced); |
| } else { |
| Dim adjCrop(crop.left, crop.top, crop.right - crop.left, |
| crop.bottom - crop.top); |
| Dim pos(dst.left, dst.top, dst.right - dst.left, |
| dst.bottom - dst.top); |
| if(transform & HAL_TRANSFORM_ROT_90) { |
| swap(adjCrop.w, adjCrop.h); |
| } |
| downscale = Rotator::getDownscaleFactor(adjCrop.w, adjCrop.h, pos.w, |
| pos.h, format, isInterlaced); |
| } |
| } |
| return downscale; |
| } |
| |
| bool isZoomModeEnabled(hwc_rect_t crop) { |
| // This does not work for zooming in top left corner of the image |
| return(crop.top > 0 || crop.left > 0); |
| } |
| |
| void updateCropAIVVideoMode(hwc_context_t *ctx, hwc_rect_t& crop, int dpy) { |
| ALOGD_IF(HWC_UTILS_DEBUG, "dpy %d Source crop [%d %d %d %d]", dpy, |
| crop.left, crop.top, crop.right, crop.bottom); |
| if(isZoomModeEnabled(crop)) { |
| Dim srcCrop(crop.left, crop.top, |
| crop.right - crop.left, |
| crop.bottom - crop.top); |
| int extW = ctx->dpyAttr[dpy].xres; |
| int extH = ctx->dpyAttr[dpy].yres; |
| //Crop the original video in order to fit external display aspect ratio |
| if(srcCrop.w * extH < extW * srcCrop.h) { |
| int offset = (srcCrop.h - ((srcCrop.w * extH) / extW)) / 2; |
| crop.top += offset; |
| crop.bottom -= offset; |
| } else { |
| int offset = (srcCrop.w - ((extW * srcCrop.h) / extH)) / 2; |
| crop.left += offset; |
| crop.right -= offset; |
| } |
| ALOGD_IF(HWC_UTILS_DEBUG, "External Resolution [%d %d] dpy %d Modified" |
| " source crop [%d %d %d %d]", extW, extH, dpy, |
| crop.left, crop.top, crop.right, crop.bottom); |
| } |
| } |
| |
| void updateDestAIVVideoMode(hwc_context_t *ctx, hwc_rect_t crop, |
| hwc_rect_t& dst, int dpy) { |
| ALOGD_IF(HWC_UTILS_DEBUG, "dpy %d Destination position [%d %d %d %d]", dpy, |
| dst.left, dst.top, dst.right, dst.bottom); |
| Dim srcCrop(crop.left, crop.top, |
| crop.right - crop.left, |
| crop.bottom - crop.top); |
| int extW = ctx->dpyAttr[dpy].xres; |
| int extH = ctx->dpyAttr[dpy].yres; |
| // Set the destination coordinates of external display to full screen, |
| // when zoom in mode is enabled or the ratio between video aspect ratio |
| // and external display aspect ratio is below the minimum tolerance level |
| // and above maximum tolerance level |
| float videoAspectRatio = ((float)srcCrop.w / (float)srcCrop.h); |
| float extDisplayAspectRatio = ((float)extW / (float)extH); |
| float videoToExternalRatio = videoAspectRatio / extDisplayAspectRatio; |
| if((fabs(1.0f - videoToExternalRatio) <= ctx->mAspectRatioToleranceLevel) || |
| (isZoomModeEnabled(crop))) { |
| dst.left = 0; |
| dst.top = 0; |
| dst.right = extW; |
| dst.bottom = extH; |
| } |
| ALOGD_IF(HWC_UTILS_DEBUG, "External Resolution [%d %d] dpy %d Modified" |
| " Destination position [%d %d %d %d] Source crop [%d %d %d %d]", |
| extW, extH, dpy, dst.left, dst.top, dst.right, dst.bottom, |
| crop.left, crop.top, crop.right, crop.bottom); |
| } |
| |
| void updateCoordinates(hwc_context_t *ctx, hwc_rect_t& crop, |
| hwc_rect_t& dst, int dpy) { |
| updateCropAIVVideoMode(ctx, crop, dpy); |
| updateDestAIVVideoMode(ctx, crop, dst, dpy); |
| } |
| |
| int configureNonSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, |
| const int& dpy, eMdpFlags& mdpFlags, eZorder& z, |
| const eDest& dest, Rotator **rot) { |
| |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| |
| if(!hnd) { |
| if (layer->flags & HWC_COLOR_FILL) { |
| // Configure Color layer |
| return configColorLayer(ctx, layer, dpy, mdpFlags, z, dest); |
| } |
| ALOGE("%s: layer handle is NULL", __FUNCTION__); |
| return -1; |
| } |
| |
| MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; |
| |
| hwc_rect_t crop = integerizeSourceCrop(layer->sourceCropf); |
| hwc_rect_t dst = layer->displayFrame; |
| int transform = layer->transform; |
| eTransform orient = static_cast<eTransform>(transform); |
| int rotFlags = ovutils::ROT_FLAGS_NONE; |
| uint32_t format = ovutils::getMdpFormat(hnd->format, hnd->flags); |
| Whf whf(getWidth(hnd), getHeight(hnd), format, (uint32_t)hnd->size); |
| |
| // Handle R/B swap |
| if (layer->flags & HWC_FORMAT_RB_SWAP) { |
| if (hnd->format == HAL_PIXEL_FORMAT_RGBA_8888) |
| whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRA_8888); |
| else if (hnd->format == HAL_PIXEL_FORMAT_RGBX_8888) |
| whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRX_8888); |
| } |
| // update source crop and destination position of AIV video layer. |
| if(ctx->listStats[dpy].mAIVVideoMode && isYuvBuffer(hnd)) { |
| updateCoordinates(ctx, crop, dst, dpy); |
| } |
| calcExtDisplayPosition(ctx, hnd, dpy, crop, dst, transform, orient); |
| int downscale = getRotDownscale(ctx, layer); |
| setMdpFlags(ctx, layer, mdpFlags, downscale, transform); |
| |
| //if 90 component or downscale, use rot |
| if((has90Transform(layer) or downscale) and isRotationDoable(ctx, hnd)) { |
| *rot = ctx->mRotMgr->getNext(); |
| if(*rot == NULL) return -1; |
| ctx->mLayerRotMap[dpy]->add(layer, *rot); |
| BwcPM::setBwc(ctx, dpy, hnd, crop, dst, transform, downscale, |
| mdpFlags); |
| //Configure rotator for pre-rotation |
| if(configRotator(*rot, whf, crop, mdpFlags, orient, downscale) < 0) { |
| ALOGE("%s: configRotator failed!", __FUNCTION__); |
| return -1; |
| } |
| updateSource(orient, whf, crop, *rot); |
| rotFlags |= ROT_PREROTATED; |
| } |
| |
| //For the mdp, since either we are pre-rotating or MDP does flips |
| orient = OVERLAY_TRANSFORM_0; |
| transform = 0; |
| PipeArgs parg(mdpFlags, whf, z, |
| static_cast<eRotFlags>(rotFlags), layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| |
| if(configMdp(ctx->mOverlay, parg, orient, crop, dst, metadata, dest) < 0) { |
| ALOGE("%s: commit failed for low res panel", __FUNCTION__); |
| return -1; |
| } |
| return 0; |
| } |
| |
| //Helper to 1) Ensure crops dont have gaps 2) Ensure L and W are even |
| void sanitizeSourceCrop(hwc_rect_t& cropL, hwc_rect_t& cropR, |
| private_handle_t *hnd) { |
| if(cropL.right - cropL.left) { |
| if(isYuvBuffer(hnd)) { |
| //Always safe to even down left |
| ovutils::even_floor(cropL.left); |
| //If right is even, automatically width is even, since left is |
| //already even |
| ovutils::even_floor(cropL.right); |
| } |
| //Make sure there are no gaps between left and right splits if the layer |
| //is spread across BOTH halves |
| if(cropR.right - cropR.left) { |
| cropR.left = cropL.right; |
| } |
| } |
| |
| if(cropR.right - cropR.left) { |
| if(isYuvBuffer(hnd)) { |
| //Always safe to even down left |
| ovutils::even_floor(cropR.left); |
| //If right is even, automatically width is even, since left is |
| //already even |
| ovutils::even_floor(cropR.right); |
| } |
| } |
| } |
| |
| int configureSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, |
| const int& dpy, eMdpFlags& mdpFlagsL, eZorder& z, |
| const eDest& lDest, const eDest& rDest, |
| Rotator **rot) { |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| if(!hnd) { |
| ALOGE("%s: layer handle is NULL", __FUNCTION__); |
| return -1; |
| } |
| |
| MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; |
| |
| int hw_w = ctx->dpyAttr[dpy].xres; |
| int hw_h = ctx->dpyAttr[dpy].yres; |
| hwc_rect_t crop = integerizeSourceCrop(layer->sourceCropf); |
| hwc_rect_t dst = layer->displayFrame; |
| int transform = layer->transform; |
| eTransform orient = static_cast<eTransform>(transform); |
| int rotFlags = ROT_FLAGS_NONE; |
| uint32_t format = ovutils::getMdpFormat(hnd->format, hnd->flags); |
| Whf whf(getWidth(hnd), getHeight(hnd), format, (uint32_t)hnd->size); |
| |
| // Handle R/B swap |
| if (layer->flags & HWC_FORMAT_RB_SWAP) { |
| if (hnd->format == HAL_PIXEL_FORMAT_RGBA_8888) |
| whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRA_8888); |
| else if (hnd->format == HAL_PIXEL_FORMAT_RGBX_8888) |
| whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRX_8888); |
| } |
| |
| // update source crop and destination position of AIV video layer. |
| if(ctx->listStats[dpy].mAIVVideoMode && isYuvBuffer(hnd)) { |
| updateCoordinates(ctx, crop, dst, dpy); |
| } |
| |
| /* Calculate the external display position based on MDP downscale, |
| ActionSafe, and extorientation features. */ |
| calcExtDisplayPosition(ctx, hnd, dpy, crop, dst, transform, orient); |
| int downscale = getRotDownscale(ctx, layer); |
| setMdpFlags(ctx, layer, mdpFlagsL, downscale, transform); |
| |
| if(lDest != OV_INVALID && rDest != OV_INVALID) { |
| //Enable overfetch |
| setMdpFlags(mdpFlagsL, OV_MDSS_MDP_DUAL_PIPE); |
| } |
| |
| //Will do something only if feature enabled and conditions suitable |
| //hollow call otherwise |
| if(ctx->mAD->prepare(ctx, crop, whf, hnd)) { |
| overlay::Writeback *wb = overlay::Writeback::getInstance(); |
| whf.format = wb->getOutputFormat(); |
| } |
| |
| if((has90Transform(layer) or downscale) and isRotationDoable(ctx, hnd)) { |
| (*rot) = ctx->mRotMgr->getNext(); |
| if((*rot) == NULL) return -1; |
| ctx->mLayerRotMap[dpy]->add(layer, *rot); |
| //Configure rotator for pre-rotation |
| if(configRotator(*rot, whf, crop, mdpFlagsL, orient, downscale) < 0) { |
| ALOGE("%s: configRotator failed!", __FUNCTION__); |
| return -1; |
| } |
| updateSource(orient, whf, crop, *rot); |
| rotFlags |= ROT_PREROTATED; |
| } |
| |
| eMdpFlags mdpFlagsR = mdpFlagsL; |
| setMdpFlags(mdpFlagsR, OV_MDSS_MDP_RIGHT_MIXER); |
| |
| hwc_rect_t tmp_cropL = {0}, tmp_dstL = {0}; |
| hwc_rect_t tmp_cropR = {0}, tmp_dstR = {0}; |
| |
| const int lSplit = getLeftSplit(ctx, dpy); |
| |
| // Calculate Left rects |
| if(dst.left < lSplit) { |
| tmp_cropL = crop; |
| tmp_dstL = dst; |
| hwc_rect_t scissor = {0, 0, lSplit, hw_h }; |
| scissor = getIntersection(ctx->mViewFrame[dpy], scissor); |
| qhwc::calculate_crop_rects(tmp_cropL, tmp_dstL, scissor, 0); |
| } |
| |
| // Calculate Right rects |
| if(dst.right > lSplit) { |
| tmp_cropR = crop; |
| tmp_dstR = dst; |
| hwc_rect_t scissor = {lSplit, 0, hw_w, hw_h }; |
| scissor = getIntersection(ctx->mViewFrame[dpy], scissor); |
| qhwc::calculate_crop_rects(tmp_cropR, tmp_dstR, scissor, 0); |
| } |
| |
| sanitizeSourceCrop(tmp_cropL, tmp_cropR, hnd); |
| |
| //When buffer is H-flipped, contents of mixer config also needs to swapped |
| //Not needed if the layer is confined to one half of the screen. |
| //If rotator has been used then it has also done the flips, so ignore them. |
| if((orient & OVERLAY_TRANSFORM_FLIP_H) && (dst.left < lSplit) && |
| (dst.right > lSplit) && (*rot) == NULL) { |
| hwc_rect_t new_cropR; |
| new_cropR.left = tmp_cropL.left; |
| new_cropR.right = new_cropR.left + (tmp_cropR.right - tmp_cropR.left); |
| |
| hwc_rect_t new_cropL; |
| new_cropL.left = new_cropR.right; |
| new_cropL.right = tmp_cropR.right; |
| |
| tmp_cropL.left = new_cropL.left; |
| tmp_cropL.right = new_cropL.right; |
| |
| tmp_cropR.left = new_cropR.left; |
| tmp_cropR.right = new_cropR.right; |
| |
| } |
| |
| //For the mdp, since either we are pre-rotating or MDP does flips |
| orient = OVERLAY_TRANSFORM_0; |
| transform = 0; |
| |
| //configure left mixer |
| if(lDest != OV_INVALID) { |
| PipeArgs pargL(mdpFlagsL, whf, z, |
| static_cast<eRotFlags>(rotFlags), layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| |
| if(configMdp(ctx->mOverlay, pargL, orient, |
| tmp_cropL, tmp_dstL, metadata, lDest) < 0) { |
| ALOGE("%s: commit failed for left mixer config", __FUNCTION__); |
| return -1; |
| } |
| } |
| |
| //configure right mixer |
| if(rDest != OV_INVALID) { |
| PipeArgs pargR(mdpFlagsR, whf, z, |
| static_cast<eRotFlags>(rotFlags), |
| layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| tmp_dstR.right = tmp_dstR.right - lSplit; |
| tmp_dstR.left = tmp_dstR.left - lSplit; |
| if(configMdp(ctx->mOverlay, pargR, orient, |
| tmp_cropR, tmp_dstR, metadata, rDest) < 0) { |
| ALOGE("%s: commit failed for right mixer config", __FUNCTION__); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int configureSourceSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, |
| const int& dpy, eMdpFlags& mdpFlagsL, eZorder& z, |
| const eDest& lDest, const eDest& rDest, |
| Rotator **rot) { |
| private_handle_t *hnd = (private_handle_t *)layer->handle; |
| if(!hnd) { |
| ALOGE("%s: layer handle is NULL", __FUNCTION__); |
| return -1; |
| } |
| |
| MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; |
| |
| hwc_rect_t crop = integerizeSourceCrop(layer->sourceCropf);; |
| hwc_rect_t dst = layer->displayFrame; |
| int transform = layer->transform; |
| eTransform orient = static_cast<eTransform>(transform); |
| const int downscale = 0; |
| int rotFlags = ROT_FLAGS_NONE; |
| //Splitting only YUV layer on primary panel needs different zorders |
| //for both layers as both the layers are configured to single mixer |
| eZorder lz = z; |
| eZorder rz = (eZorder)(z + 1); |
| |
| Whf whf(getWidth(hnd), getHeight(hnd), |
| getMdpFormat(hnd->format), (uint32_t)hnd->size); |
| |
| // update source crop and destination position of AIV video layer. |
| if(ctx->listStats[dpy].mAIVVideoMode && isYuvBuffer(hnd)) { |
| updateCoordinates(ctx, crop, dst, dpy); |
| } |
| |
| /* Calculate the external display position based on MDP downscale, |
| ActionSafe, and extorientation features. */ |
| calcExtDisplayPosition(ctx, hnd, dpy, crop, dst, transform, orient); |
| |
| setMdpFlags(ctx, layer, mdpFlagsL, 0, transform); |
| trimLayer(ctx, dpy, transform, crop, dst); |
| |
| if(has90Transform(layer) && isRotationDoable(ctx, hnd)) { |
| (*rot) = ctx->mRotMgr->getNext(); |
| if((*rot) == NULL) return -1; |
| ctx->mLayerRotMap[dpy]->add(layer, *rot); |
| //Configure rotator for pre-rotation |
| if(configRotator(*rot, whf, crop, mdpFlagsL, orient, downscale) < 0) { |
| ALOGE("%s: configRotator failed!", __FUNCTION__); |
| return -1; |
| } |
| updateSource(orient, whf, crop, *rot); |
| rotFlags |= ROT_PREROTATED; |
| } |
| |
| eMdpFlags mdpFlagsR = mdpFlagsL; |
| int lSplit = dst.left + (dst.right - dst.left)/2; |
| |
| hwc_rect_t tmp_cropL = {0}, tmp_dstL = {0}; |
| hwc_rect_t tmp_cropR = {0}, tmp_dstR = {0}; |
| |
| if(lDest != OV_INVALID) { |
| tmp_cropL = crop; |
| tmp_dstL = dst; |
| hwc_rect_t scissor = {dst.left, dst.top, lSplit, dst.bottom }; |
| qhwc::calculate_crop_rects(tmp_cropL, tmp_dstL, scissor, 0); |
| } |
| if(rDest != OV_INVALID) { |
| tmp_cropR = crop; |
| tmp_dstR = dst; |
| hwc_rect_t scissor = {lSplit, dst.top, dst.right, dst.bottom }; |
| qhwc::calculate_crop_rects(tmp_cropR, tmp_dstR, scissor, 0); |
| } |
| |
| sanitizeSourceCrop(tmp_cropL, tmp_cropR, hnd); |
| |
| //When buffer is H-flipped, contents of mixer config also needs to swapped |
| //Not needed if the layer is confined to one half of the screen. |
| //If rotator has been used then it has also done the flips, so ignore them. |
| if((orient & OVERLAY_TRANSFORM_FLIP_H) && lDest != OV_INVALID |
| && rDest != OV_INVALID && (*rot) == NULL) { |
| hwc_rect_t new_cropR; |
| new_cropR.left = tmp_cropL.left; |
| new_cropR.right = new_cropR.left + (tmp_cropR.right - tmp_cropR.left); |
| |
| hwc_rect_t new_cropL; |
| new_cropL.left = new_cropR.right; |
| new_cropL.right = tmp_cropR.right; |
| |
| tmp_cropL.left = new_cropL.left; |
| tmp_cropL.right = new_cropL.right; |
| |
| tmp_cropR.left = new_cropR.left; |
| tmp_cropR.right = new_cropR.right; |
| |
| } |
| |
| //For the mdp, since either we are pre-rotating or MDP does flips |
| orient = OVERLAY_TRANSFORM_0; |
| transform = 0; |
| |
| //configure left half |
| if(lDest != OV_INVALID) { |
| PipeArgs pargL(mdpFlagsL, whf, lz, |
| static_cast<eRotFlags>(rotFlags), layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| |
| if(configMdp(ctx->mOverlay, pargL, orient, |
| tmp_cropL, tmp_dstL, metadata, lDest) < 0) { |
| ALOGE("%s: commit failed for left half config", __FUNCTION__); |
| return -1; |
| } |
| } |
| |
| //configure right half |
| if(rDest != OV_INVALID) { |
| PipeArgs pargR(mdpFlagsR, whf, rz, |
| static_cast<eRotFlags>(rotFlags), |
| layer->planeAlpha, |
| (ovutils::eBlending) getBlending(layer->blending)); |
| if(configMdp(ctx->mOverlay, pargR, orient, |
| tmp_cropR, tmp_dstR, metadata, rDest) < 0) { |
| ALOGE("%s: commit failed for right half config", __FUNCTION__); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| bool canUseRotator(hwc_context_t *ctx, int dpy) { |
| if(ctx->mOverlay->isDMAMultiplexingSupported() && |
| isSecondaryConnected(ctx) && |
| !ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isPause) { |
| /* mdss driver on certain targets support multiplexing of DMA pipe |
| * in LINE and BLOCK modes for writeback panels. |
| */ |
| if(dpy == HWC_DISPLAY_PRIMARY) |
| return false; |
| } |
| if((ctx->mMDP.version == qdutils::MDP_V3_0_4) |
| ||(ctx->mMDP.version == qdutils::MDP_V3_0_5)) |
| return false; |
| return true; |
| } |
| |
| int getLeftSplit(hwc_context_t *ctx, const int& dpy) { |
| //Default even split for all displays with high res |
| int lSplit = ctx->dpyAttr[dpy].xres / 2; |
| if(dpy == HWC_DISPLAY_PRIMARY && |
| qdutils::MDPVersion::getInstance().getLeftSplit()) { |
| //Override if split published by driver for primary |
| lSplit = qdutils::MDPVersion::getInstance().getLeftSplit(); |
| } |
| return lSplit; |
| } |
| |
| bool isDisplaySplit(hwc_context_t* ctx, int dpy) { |
| qdutils::MDPVersion& mdpHw = qdutils::MDPVersion::getInstance(); |
| if(ctx->dpyAttr[dpy].xres > mdpHw.getMaxMixerWidth()) { |
| return true; |
| } |
| if(dpy == HWC_DISPLAY_PRIMARY && mdpHw.getRightSplit()) { |
| return true; |
| } |
| return false; |
| } |
| |
| //clear prev layer prop flags and realloc for current frame |
| void reset_layer_prop(hwc_context_t* ctx, int dpy, int numAppLayers) { |
| if(ctx->layerProp[dpy]) { |
| delete[] ctx->layerProp[dpy]; |
| ctx->layerProp[dpy] = NULL; |
| } |
| ctx->layerProp[dpy] = new LayerProp[numAppLayers]; |
| } |
| |
| bool isAbcInUse(hwc_context_t *ctx){ |
| return (ctx->enableABC && ctx->listStats[0].renderBufIndexforABC == 0); |
| } |
| |
| void dumpBuffer(private_handle_t *ohnd, char *bufferName) { |
| if (ohnd != NULL && ohnd->base) { |
| char dumpFilename[PATH_MAX]; |
| bool bResult = false; |
| int width = getWidth(ohnd); |
| int height = getHeight(ohnd); |
| int format = ohnd->format; |
| //dummy aligned w & h. |
| int alW = 0, alH = 0; |
| int size = getBufferSizeAndDimensions(width, height, format, alW, alH); |
| snprintf(dumpFilename, sizeof(dumpFilename), "/data/%s.%s.%dx%d.raw", |
| bufferName, |
| overlay::utils::getFormatString(utils::getMdpFormat(format)), |
| width, height); |
| FILE* fp = fopen(dumpFilename, "w+"); |
| if (NULL != fp) { |
| bResult = (bool) fwrite((void*)ohnd->base, size, 1, fp); |
| fclose(fp); |
| } |
| ALOGD("Buffer[%s] Dump to %s: %s", |
| bufferName, dumpFilename, bResult ? "Success" : "Fail"); |
| } |
| } |
| |
| bool isGLESComp(hwc_context_t *ctx, |
| hwc_display_contents_1_t* list) { |
| int numAppLayers = ctx->listStats[HWC_DISPLAY_PRIMARY].numAppLayers; |
| for(int index = 0; index < numAppLayers; index++) { |
| hwc_layer_1_t* layer = &(list->hwLayers[index]); |
| if(layer->compositionType == HWC_FRAMEBUFFER) |
| return true; |
| } |
| return false; |
| } |
| |
| void setGPUHint(hwc_context_t* ctx, hwc_display_contents_1_t* list) { |
| struct gpu_hint_info *gpuHint = &ctx->mGPUHintInfo; |
| if(!gpuHint->mGpuPerfModeEnable || !ctx || !list) |
| return; |
| |
| #ifdef QCOM_BSP |
| /* Set the GPU hint flag to high for MIXED/GPU composition only for |
| first frame after MDP -> GPU/MIXED mode transition. Set the GPU |
| hint to default if the previous composition is GPU or current GPU |
| composition is due to idle fallback */ |
| if(!gpuHint->mEGLDisplay || !gpuHint->mEGLContext) { |
| gpuHint->mEGLDisplay = eglGetCurrentDisplay(); |
| if(!gpuHint->mEGLDisplay) { |
| ALOGW("%s Warning: EGL current display is NULL", __FUNCTION__); |
| return; |
| } |
| gpuHint->mEGLContext = eglGetCurrentContext(); |
| if(!gpuHint->mEGLContext) { |
| ALOGW("%s Warning: EGL current context is NULL", __FUNCTION__); |
| return; |
| } |
| } |
| if(isGLESComp(ctx, list)) { |
| if(gpuHint->mCompositionState != COMPOSITION_STATE_GPU |
| && !MDPComp::isIdleFallback()) { |
| EGLint attr_list[] = {EGL_GPU_HINT_1, |
| EGL_GPU_LEVEL_3, |
| EGL_NONE }; |
| if((gpuHint->mCurrGPUPerfMode != EGL_GPU_LEVEL_3) && |
| !eglGpuPerfHintQCOM(gpuHint->mEGLDisplay, |
| gpuHint->mEGLContext, attr_list)) { |
| ALOGW("eglGpuPerfHintQCOM failed for Built in display"); |
| } else { |
| gpuHint->mCurrGPUPerfMode = EGL_GPU_LEVEL_3; |
| gpuHint->mCompositionState = COMPOSITION_STATE_GPU; |
| } |
| } else { |
| EGLint attr_list[] = {EGL_GPU_HINT_1, |
| EGL_GPU_LEVEL_0, |
| EGL_NONE }; |
| if((gpuHint->mCurrGPUPerfMode != EGL_GPU_LEVEL_0) && |
| !eglGpuPerfHintQCOM(gpuHint->mEGLDisplay, |
| gpuHint->mEGLContext, attr_list)) { |
| ALOGW("eglGpuPerfHintQCOM failed for Built in display"); |
| } else { |
| gpuHint->mCurrGPUPerfMode = EGL_GPU_LEVEL_0; |
| } |
| if(MDPComp::isIdleFallback()) { |
| gpuHint->mCompositionState = COMPOSITION_STATE_IDLE_FALLBACK; |
| } |
| } |
| } else { |
| /* set the GPU hint flag to default for MDP composition */ |
| EGLint attr_list[] = {EGL_GPU_HINT_1, |
| EGL_GPU_LEVEL_0, |
| EGL_NONE }; |
| if((gpuHint->mCurrGPUPerfMode != EGL_GPU_LEVEL_0) && |
| !eglGpuPerfHintQCOM(gpuHint->mEGLDisplay, |
| gpuHint->mEGLContext, attr_list)) { |
| ALOGW("eglGpuPerfHintQCOM failed for Built in display"); |
| } else { |
| gpuHint->mCurrGPUPerfMode = EGL_GPU_LEVEL_0; |
| } |
| gpuHint->mCompositionState = COMPOSITION_STATE_MDP; |
| } |
| #endif |
| } |
| |
| bool isPeripheral(const hwc_rect_t& rect1, const hwc_rect_t& rect2) { |
| // To be peripheral, 3 boundaries should match. |
| uint8_t eqBounds = 0; |
| if (rect1.left == rect2.left) |
| eqBounds++; |
| if (rect1.top == rect2.top) |
| eqBounds++; |
| if (rect1.right == rect2.right) |
| eqBounds++; |
| if (rect1.bottom == rect2.bottom) |
| eqBounds++; |
| return (eqBounds == 3); |
| } |
| |
| void processBootAnimCompleted(hwc_context_t *ctx) { |
| char value[PROPERTY_VALUE_MAX]; |
| int boot_finished = 0, ret = -1; |
| int (*applyMode)(int) = NULL; |
| void *modeHandle = NULL; |
| |
| // Reading property set on boot finish in SF |
| property_get("service.bootanim.exit", value, "0"); |
| boot_finished = atoi(value); |
| if (!boot_finished) |
| return; |
| |
| modeHandle = dlopen("libmm-qdcm.so", RTLD_NOW); |
| if (modeHandle) { |
| *(void **)&applyMode = dlsym(modeHandle, "applyDefaults"); |
| if (applyMode) { |
| ret = applyMode(HWC_DISPLAY_PRIMARY); |
| if (ret) |
| ALOGD("%s: Not able to apply default mode", __FUNCTION__); |
| } else { |
| ALOGE("%s: No symbol applyDefaults found", __FUNCTION__); |
| } |
| dlclose(modeHandle); |
| } else { |
| ALOGE("%s: Not able to load libmm-qdcm.so", __FUNCTION__); |
| } |
| |
| ctx->mBootAnimCompleted = true; |
| } |
| |
| void BwcPM::setBwc(const hwc_context_t *ctx, const int& dpy, |
| const private_handle_t *hnd, |
| const hwc_rect_t& crop, const hwc_rect_t& dst, |
| const int& transform,const int& downscale, |
| ovutils::eMdpFlags& mdpFlags) { |
| //Target doesnt support Bwc |
| qdutils::MDPVersion& mdpHw = qdutils::MDPVersion::getInstance(); |
| if(not mdpHw.supportsBWC()) { |
| return; |
| } |
| //Disabled at runtime |
| if(not ctx->mBWCEnabled) return; |
| //BWC not supported with rot-downscale |
| if(downscale) return; |
| //Not enabled for secondary displays |
| if(dpy) return; |
| //Not enabled for non-video buffers |
| if(not isYuvBuffer(hnd)) return; |
| |
| int src_w = crop.right - crop.left; |
| int src_h = crop.bottom - crop.top; |
| int dst_w = dst.right - dst.left; |
| int dst_h = dst.bottom - dst.top; |
| if(transform & HAL_TRANSFORM_ROT_90) { |
| swap(src_w, src_h); |
| } |
| //src width > MAX mixer supported dim |
| if(src_w > (int) qdutils::MDPVersion::getInstance().getMaxPipeWidth()) { |
| return; |
| } |
| //Decimation necessary, cannot use BWC. H/W requirement. |
| if(qdutils::MDPVersion::getInstance().supportsDecimation()) { |
| uint8_t horzDeci = 0; |
| uint8_t vertDeci = 0; |
| ovutils::getDecimationFactor(src_w, src_h, dst_w, dst_h, horzDeci, |
| vertDeci); |
| if(horzDeci || vertDeci) return; |
| } |
| |
| ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDSS_MDP_BWC_EN); |
| } |
| |
| void LayerRotMap::add(hwc_layer_1_t* layer, Rotator *rot) { |
| if(mCount >= RotMgr::MAX_ROT_SESS) return; |
| mLayer[mCount] = layer; |
| mRot[mCount] = rot; |
| mCount++; |
| } |
| |
| void LayerRotMap::reset() { |
| for (int i = 0; i < RotMgr::MAX_ROT_SESS; i++) { |
| mLayer[i] = 0; |
| mRot[i] = 0; |
| } |
| mCount = 0; |
| } |
| |
| void LayerRotMap::clear() { |
| RotMgr::getInstance()->markUnusedTop(mCount); |
| reset(); |
| } |
| |
| bool LayerRotMap::isRotCached(uint32_t index) const { |
| overlay::Rotator* rot = getRot(index); |
| hwc_layer_1_t* layer = getLayer(index); |
| |
| if(rot and layer and layer->handle) { |
| private_handle_t *hnd = (private_handle_t *)(layer->handle); |
| return (rot->isRotCached(hnd->fd,(uint32_t)(hnd->offset))); |
| } |
| return false; |
| } |
| |
| void LayerRotMap::setReleaseFd(const int& fence) { |
| for(uint32_t i = 0; i < mCount; i++) { |
| if(mRot[i] and mLayer[i] and mLayer[i]->handle) { |
| /* Ensure that none of the above (Rotator-instance, |
| * layer and layer-handle) are NULL*/ |
| if(isRotCached(i)) |
| mRot[i]->setPrevBufReleaseFd(dup(fence)); |
| else |
| mRot[i]->setCurrBufReleaseFd(dup(fence)); |
| } |
| } |
| } |
| |
| hwc_rect expandROIFromMidPoint(hwc_rect roi, hwc_rect fullFrame) { |
| int lRoiWidth = 0, rRoiWidth = 0; |
| int half_frame_width = fullFrame.right/2; |
| |
| hwc_rect lFrame = fullFrame; |
| hwc_rect rFrame = fullFrame; |
| lFrame.right = (lFrame.right - lFrame.left)/2; |
| rFrame.left = lFrame.right; |
| |
| hwc_rect lRoi = getIntersection(roi, lFrame); |
| hwc_rect rRoi = getIntersection(roi, rFrame); |
| |
| lRoiWidth = lRoi.right - lRoi.left; |
| rRoiWidth = rRoi.right - rRoi.left; |
| |
| if(lRoiWidth && rRoiWidth) { |
| if(lRoiWidth < rRoiWidth) |
| roi.left = half_frame_width - rRoiWidth; |
| else |
| roi.right = half_frame_width + lRoiWidth; |
| } |
| return roi; |
| } |
| |
| void resetROI(hwc_context_t *ctx, const int dpy) { |
| const int fbXRes = (int)ctx->dpyAttr[dpy].xres; |
| const int fbYRes = (int)ctx->dpyAttr[dpy].yres; |
| if(isDisplaySplit(ctx, dpy)) { |
| const int lSplit = getLeftSplit(ctx, dpy); |
| ctx->listStats[dpy].lRoi = (struct hwc_rect){0, 0, lSplit, fbYRes}; |
| ctx->listStats[dpy].rRoi = (struct hwc_rect){lSplit, 0, fbXRes, fbYRes}; |
| } else { |
| ctx->listStats[dpy].lRoi = (struct hwc_rect){0, 0,fbXRes, fbYRes}; |
| ctx->listStats[dpy].rRoi = (struct hwc_rect){0, 0, 0, 0}; |
| } |
| } |
| |
| hwc_rect_t getSanitizeROI(struct hwc_rect roi, hwc_rect boundary) |
| { |
| if(!isValidRect(roi)) |
| return roi; |
| |
| struct hwc_rect t_roi = roi; |
| |
| const int LEFT_ALIGN = qdutils::MDPVersion::getInstance().getLeftAlign(); |
| const int WIDTH_ALIGN = qdutils::MDPVersion::getInstance().getWidthAlign(); |
| const int TOP_ALIGN = qdutils::MDPVersion::getInstance().getTopAlign(); |
| const int HEIGHT_ALIGN = qdutils::MDPVersion::getInstance().getHeightAlign(); |
| const int MIN_WIDTH = qdutils::MDPVersion::getInstance().getMinROIWidth(); |
| const int MIN_HEIGHT = qdutils::MDPVersion::getInstance().getMinROIHeight(); |
| |
| /* Align to minimum width recommended by the panel */ |
| if((t_roi.right - t_roi.left) < MIN_WIDTH) { |
| if((t_roi.left + MIN_WIDTH) > boundary.right) |
| t_roi.left = t_roi.right - MIN_WIDTH; |
| else |
| t_roi.right = t_roi.left + MIN_WIDTH; |
| } |
| |
| /* Align to minimum height recommended by the panel */ |
| if((t_roi.bottom - t_roi.top) < MIN_HEIGHT) { |
| if((t_roi.top + MIN_HEIGHT) > boundary.bottom) |
| t_roi.top = t_roi.bottom - MIN_HEIGHT; |
| else |
| t_roi.bottom = t_roi.top + MIN_HEIGHT; |
| } |
| |
| /* Align left and width to meet panel restrictions */ |
| if(LEFT_ALIGN) |
| t_roi.left = t_roi.left - (t_roi.left % LEFT_ALIGN); |
| |
| if(WIDTH_ALIGN) { |
| int width = t_roi.right - t_roi.left; |
| width = WIDTH_ALIGN * ((width + (WIDTH_ALIGN - 1)) / WIDTH_ALIGN); |
| t_roi.right = t_roi.left + width; |
| |
| if(t_roi.right > boundary.right) { |
| t_roi.right = boundary.right; |
| t_roi.left = t_roi.right - width; |
| |
| if(LEFT_ALIGN) |
| t_roi.left = t_roi.left - (t_roi.left % LEFT_ALIGN); |
| } |
| } |
| |
| |
| /* Align top and height to meet panel restrictions */ |
| if(TOP_ALIGN) |
| t_roi.top = t_roi.top - (t_roi.top % TOP_ALIGN); |
| |
| if(HEIGHT_ALIGN) { |
| int height = t_roi.bottom - t_roi.top; |
| height = HEIGHT_ALIGN * ((height + (HEIGHT_ALIGN - 1)) / HEIGHT_ALIGN); |
| t_roi.bottom = t_roi.top + height; |
| |
| if(t_roi.bottom > boundary.bottom) { |
| t_roi.bottom = boundary.bottom; |
| t_roi.top = t_roi.bottom - height; |
| |
| if(TOP_ALIGN) |
| t_roi.top = t_roi.top - (t_roi.top % TOP_ALIGN); |
| } |
| } |
| |
| |
| return t_roi; |
| } |
| |
| void handle_pause(hwc_context_t* ctx, int dpy) { |
| if(ctx->dpyAttr[dpy].connected) { |
| ctx->mDrawLock.lock(); |
| ctx->dpyAttr[dpy].isActive = true; |
| ctx->dpyAttr[dpy].isPause = true; |
| ctx->mDrawLock.unlock(); |
| ctx->proc->invalidate(ctx->proc); |
| |
| usleep(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].vsync_period |
| * 2 / 1000); |
| |
| // At this point all the pipes used by External have been |
| // marked as UNSET. |
| ctx->mDrawLock.lock(); |
| // Perform commit to unstage the pipes. |
| if (!Overlay::displayCommit(ctx->dpyAttr[dpy].fd)) { |
| ALOGE("%s: display commit fail! for %d dpy", |
| __FUNCTION__, dpy); |
| } |
| ctx->mDrawLock.unlock(); |
| ctx->proc->invalidate(ctx->proc); |
| } |
| return; |
| } |
| |
| void handle_resume(hwc_context_t* ctx, int dpy) { |
| if(ctx->dpyAttr[dpy].connected) { |
| ctx->mDrawLock.lock(); |
| ctx->dpyAttr[dpy].isConfiguring = true; |
| ctx->dpyAttr[dpy].isActive = true; |
| ctx->mDrawLock.unlock(); |
| ctx->proc->invalidate(ctx->proc); |
| |
| usleep(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].vsync_period |
| * 2 / 1000); |
| |
| //At this point external has all the pipes it would need. |
| ctx->mDrawLock.lock(); |
| ctx->dpyAttr[dpy].isPause = false; |
| ctx->mDrawLock.unlock(); |
| ctx->proc->invalidate(ctx->proc); |
| } |
| return; |
| } |
| |
| void clearPipeResources(hwc_context_t* ctx, int dpy) { |
| if(ctx->mOverlay) { |
| ctx->mOverlay->configBegin(); |
| ctx->mOverlay->configDone(); |
| } |
| if(ctx->mRotMgr) { |
| ctx->mRotMgr->clear(); |
| } |
| // Call a display commit to ensure that pipes and associated |
| // fd's are cleaned up. |
| if(!Overlay::displayCommit(ctx->dpyAttr[dpy].fd)) { |
| ALOGE("%s: display commit failed for %d", __FUNCTION__, dpy); |
| } |
| } |
| |
| // Handles online events when HDMI is the primary display. In particular, |
| // online events for hdmi connected before AND after boot up and HWC init. |
| void handle_online(hwc_context_t* ctx, int dpy) { |
| // Close the current fd if it was opened earlier on when HWC |
| // was initialized. |
| if (ctx->dpyAttr[dpy].fd >= 0) { |
| close(ctx->dpyAttr[dpy].fd); |
| ctx->dpyAttr[dpy].fd = -1; |
| } |
| // TODO: If HDMI is connected after the display has booted up, |
| // and the best configuration is different from the default |
| // then we need to deal with this appropriately. |
| ctx->mHDMIDisplay->configure(); |
| updateDisplayInfo(ctx, dpy); |
| initCompositionResources(ctx, dpy); |
| ctx->dpyAttr[dpy].connected = true; |
| } |
| |
| // Handles offline events for HDMI. This can be used for offline events |
| // initiated by the HDMI driver and the CEC framework. |
| void handle_offline(hwc_context_t* ctx, int dpy) { |
| destroyCompositionResources(ctx, dpy); |
| // Clear all pipe resources and call a display commit to ensure |
| // that all the fd's are closed. This will ensure that the HDMI |
| // core turns off and that we receive an event the next time the |
| // cable is connected. |
| if (ctx->mHDMIDisplay->isHDMIPrimaryDisplay()) { |
| clearPipeResources(ctx, dpy); |
| } |
| ctx->mHDMIDisplay->teardown(); |
| resetDisplayInfo(ctx, dpy); |
| ctx->dpyAttr[dpy].connected = false; |
| ctx->dpyAttr[dpy].isActive = false; |
| } |
| |
| };//namespace qhwc |