| /* |
| * Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __DRM_INTERFACE_H__ |
| #define __DRM_INTERFACE_H__ |
| |
| #include <map> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include "xf86drm.h" |
| #include "xf86drmMode.h" |
| |
| namespace sde_drm { |
| /* |
| * Drm Atomic Operation Codes |
| */ |
| enum struct DRMOps { |
| /* |
| * Op: Sets plane source crop |
| * Arg: uint32_t - Plane ID |
| * DRMRect - Source Rectangle |
| */ |
| PLANE_SET_SRC_RECT, |
| /* |
| * Op: Sets plane destination rect |
| * Arg: uint32_t - Plane ID |
| * DRMRect - Dst Rectangle |
| */ |
| PLANE_SET_DST_RECT, |
| /* |
| * Op: Sets plane zorder |
| * Arg: uint32_t - Plane ID |
| * uint32_t - zorder |
| */ |
| PLANE_SET_ZORDER, |
| /* |
| * Op: Sets plane rotation flags |
| * Arg: uint32_t - Plane ID |
| * uint32_t - bit mask of rotation flags (See drm_mode.h for enums) |
| */ |
| PLANE_SET_ROTATION, |
| /* |
| * Op: Sets plane alpha |
| * Arg: uint32_t - Plane ID |
| * uint32_t - alpha value |
| */ |
| PLANE_SET_ALPHA, |
| /* |
| * Op: Sets the blend type |
| * Arg: uint32_t - Plane ID |
| * uint32_t - blend type (see DRMBlendType) |
| */ |
| PLANE_SET_BLEND_TYPE, |
| /* |
| * Op: Sets horizontal decimation |
| * Arg: uint32_t - Plane ID |
| * uint32_t - decimation factor |
| */ |
| PLANE_SET_H_DECIMATION, |
| /* |
| * Op: Sets vertical decimation |
| * Arg: uint32_t - Plane ID |
| * uint32_t - decimation factor |
| */ |
| PLANE_SET_V_DECIMATION, |
| /* |
| * Op: Sets source config flags |
| * Arg: uint32_t - Plane ID |
| * uint32_t - flags to enable or disable a specific op. E.g. deinterlacing |
| */ |
| PLANE_SET_SRC_CONFIG, |
| /* |
| * Op: Sets frame buffer ID for plane. Set together with CRTC. |
| * Arg: uint32_t - Plane ID |
| * uint32_t - Framebuffer ID |
| */ |
| PLANE_SET_FB_ID, |
| /* |
| * Op: Sets the crtc for this plane. Set together with FB_ID. |
| * Arg: uint32_t - Plane ID |
| * uint32_t - CRTC ID |
| */ |
| PLANE_SET_CRTC, |
| /* |
| * Op: Sets acquire fence for this plane's buffer. Set together with FB_ID, CRTC. |
| * Arg: uint32_t - Plane ID |
| * uint32_t - Input fence |
| */ |
| PLANE_SET_INPUT_FENCE, |
| /* |
| * Op: Sets scaler config on this plane. |
| * Arg: uint32_t - Plane ID |
| * uint64_t - Address of the scaler config object (version based) |
| */ |
| PLANE_SET_SCALER_CONFIG, |
| /* |
| * Op: Activate or deactivate a CRTC |
| * Arg: uint32_t - CRTC ID |
| * uint32_t - 1 to enable, 0 to disable |
| */ |
| CRTC_SET_ACTIVE, |
| /* |
| * Op: Sets display mode |
| * Arg: uint32_t - CRTC ID |
| * drmModeModeInfo* - Pointer to display mode |
| */ |
| CRTC_SET_MODE, |
| /* |
| * Op: Sets an offset indicating when a release fence should be signalled. |
| * Arg: uint32_t - offset |
| * 0: non-speculative, default |
| * 1: speculative |
| */ |
| CRTC_SET_OUTPUT_FENCE_OFFSET, |
| /* |
| * Op: Returns release fence for this frame. Should be called after Commit() on |
| * DRMAtomicReqInterface. |
| * Arg: uint32_t - CRTC ID |
| * int * - Pointer to an integer that will hold the returned fence |
| */ |
| CRTC_GET_RELEASE_FENCE, |
| /* |
| * Op: Sets PP feature |
| * Arg: uint32_t - CRTC ID |
| * DRMPPFeatureInfo * - PP feature data pointer |
| */ |
| CRTC_SET_POST_PROC, |
| /* |
| * Op: Returns retire fence for this commit. Should be called after Commit() on |
| * DRMAtomicReqInterface. |
| * Arg: uint32_t - Connector ID |
| * int * - Pointer to an integer that will hold the returned fence |
| */ |
| CONNECTOR_GET_RETIRE_FENCE, |
| /* |
| * Op: Sets writeback connector destination rect |
| * Arg: uint32_t - Connector ID |
| * DRMRect - Dst Rectangle |
| */ |
| CONNECTOR_SET_OUTPUT_RECT, |
| /* |
| * Op: Sets frame buffer ID for writeback connector. |
| * Arg: uint32_t - Connector ID |
| * uint32_t - Framebuffer ID |
| */ |
| CONNECTOR_SET_OUTPUT_FB_ID, |
| }; |
| |
| enum struct DRMRotation { |
| FLIP_H = 0x1, |
| FLIP_V = 0x2, |
| ROT_90 = 0x4, |
| }; |
| |
| enum struct DRMBlendType { |
| UNDEFINED = 0, |
| OPAQUE = 1, |
| PREMULTIPLIED = 2, |
| COVERAGE = 3, |
| }; |
| |
| enum struct DRMSrcConfig { |
| DEINTERLACE = 0, |
| }; |
| |
| /* Display type to identify a suitable connector */ |
| enum struct DRMDisplayType { |
| PERIPHERAL, |
| TV, |
| VIRTUAL, |
| }; |
| |
| struct DRMRect { |
| uint32_t left; // Left-most pixel coordinate. |
| uint32_t top; // Top-most pixel coordinate. |
| uint32_t right; // Right-most pixel coordinate. |
| uint32_t bottom; // Bottom-most pixel coordinate. |
| }; |
| |
| //------------------------------------------------------------------------ |
| // DRM Info Query Types |
| //------------------------------------------------------------------------ |
| |
| enum struct QSEEDVersion { |
| V1, |
| V2, |
| V3, |
| }; |
| |
| enum struct SmartDMARevision { |
| V1, |
| V2, |
| }; |
| |
| /* Per CRTC Resource Info*/ |
| struct DRMCrtcInfo { |
| bool has_src_split; |
| uint32_t max_blend_stages; |
| QSEEDVersion qseed_version; |
| SmartDMARevision smart_dma_rev; |
| }; |
| |
| enum struct DRMPlaneType { |
| // Has CSC and scaling capability |
| VIG = 0, |
| // Has scaling capability but no CSC |
| RGB, |
| // No scaling support |
| DMA, |
| // Supports a small dimension and doesn't use a CRTC stage |
| CURSOR, |
| MAX, |
| }; |
| |
| struct DRMPlaneTypeInfo { |
| DRMPlaneType type; |
| uint32_t master_plane_id; |
| // FourCC format enum and modifier |
| std::vector<std::pair<uint32_t, uint64_t>> formats_supported; |
| uint32_t max_linewidth; |
| uint32_t max_upscale; |
| uint32_t max_downscale; |
| uint32_t max_horizontal_deci; |
| uint32_t max_vertical_deci; |
| }; |
| |
| // All DRM Planes as map<Plane_id , plane_type_info> listed from highest to lowest priority |
| typedef std::vector<std::pair<uint32_t, DRMPlaneTypeInfo>> DRMPlanesInfo; |
| |
| enum struct DRMTopology { |
| UNKNOWN, // To be compat with driver defs in sde_kms.h |
| SINGLE_LM, |
| DUAL_LM, |
| PPSPLIT, |
| DUAL_LM_MERGE, |
| }; |
| |
| enum struct DRMPanelMode { |
| VIDEO, |
| COMMAND, |
| }; |
| |
| /* Per Connector Info*/ |
| struct DRMConnectorInfo { |
| uint32_t mmWidth; |
| uint32_t mmHeight; |
| uint32_t type; |
| uint32_t num_modes; |
| drmModeModeInfo *modes; |
| DRMTopology topology; |
| std::string panel_name; |
| DRMPanelMode panel_mode; |
| bool is_primary; |
| // Valid only if DRMPanelMode is VIDEO |
| bool dynamic_fps; |
| // FourCC format enum and modifier |
| std::vector<std::pair<uint32_t, uint64_t>> formats_supported; |
| // Valid only if type is DRM_MODE_CONNECTOR_VIRTUAL |
| uint32_t max_linewidth; |
| }; |
| |
| /* Identifier token for a display */ |
| struct DRMDisplayToken { |
| uint32_t conn_id; |
| uint32_t crtc_id; |
| }; |
| |
| enum DRMPPFeatureID { |
| kFeaturePcc, |
| kFeatureIgc, |
| kFeaturePgc, |
| kFeatureMixerGc, |
| kFeaturePaV2, |
| kFeatureDither, |
| kFeatureGamut, |
| kFeaturePADither, |
| kPPFeaturesMax, |
| }; |
| |
| enum DRMPPPropType { |
| kPropEnum, |
| kPropRange, |
| kPropBlob, |
| kPropTypeMax, |
| }; |
| |
| struct DRMPPFeatureInfo { |
| DRMPPFeatureID id; |
| DRMPPPropType type; |
| uint32_t version; |
| uint32_t payload_size; |
| void *payload; |
| }; |
| |
| struct DRMScalerLUTInfo { |
| uint32_t dir_lut_size = 0; |
| uint32_t cir_lut_size = 0; |
| uint32_t sep_lut_size = 0; |
| uint64_t dir_lut = 0; |
| uint64_t cir_lut = 0; |
| uint64_t sep_lut = 0; |
| }; |
| |
| /* DRM Atomic Request Property Set. |
| * |
| * Helper class to create and populate atomic properties of DRM components |
| * when rendered in DRM atomic mode */ |
| class DRMAtomicReqInterface { |
| public: |
| virtual ~DRMAtomicReqInterface() {} |
| /* Perform request operation. |
| * |
| * [input]: opcode: operation code from DRMOps list. |
| * var_arg: arguments for DRMOps's can differ in number and |
| * data type. Refer above DRMOps to details. |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int Perform(DRMOps opcode, ...) = 0; |
| |
| /* |
| * Commit the params set via Perform(). Also resets the properties after commit. Needs to be |
| * called every frame. |
| * [input]: synchronous: Determines if the call should block until a h/w flip |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int Commit(bool synchronous) = 0; |
| /* |
| * Validate the params set via Perform(). |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int Validate() = 0; |
| }; |
| |
| class DRMManagerInterface; |
| |
| /* Populates a singleton instance of DRMManager */ |
| typedef int (*GetDRMManager)(int fd, DRMManagerInterface **intf); |
| |
| /* Destroy DRMManager instance */ |
| typedef int (*DestroyDRMManager)(); |
| |
| /* |
| * DRM Manager Interface - Any class which plans to implement helper function for vendor |
| * specific DRM driver implementation must implement the below interface routines to work |
| * with SDM. |
| */ |
| |
| class DRMManagerInterface { |
| public: |
| virtual ~DRMManagerInterface() {} |
| |
| /* |
| * Since SDM completely manages the planes. GetPlanesInfo will provide all |
| * the plane information. |
| * [output]: DRMPlanesInfo: Resource Info for planes. |
| */ |
| virtual void GetPlanesInfo(DRMPlanesInfo *info) = 0; |
| |
| /* |
| * Will provide all the information of a selected crtc. |
| * [input]: Use crtc id 0 to obtain system wide info |
| * [output]: DRMCrtcInfo: Resource Info for the given CRTC id. |
| */ |
| virtual void GetCrtcInfo(uint32_t crtc_id, DRMCrtcInfo *info) = 0; |
| |
| /* |
| * Will provide all the information of a selected connector. |
| * [output]: DRMConnectorInfo: Resource Info for the given connector id |
| */ |
| virtual void GetConnectorInfo(uint32_t conn_id, DRMConnectorInfo *info) = 0; |
| |
| /* |
| * Will query post propcessing feature info of a CRTC. |
| * [output]: DRMPPFeatureInfo: CRTC post processing feature info |
| */ |
| virtual void GetCrtcPPInfo(uint32_t crtc_id, DRMPPFeatureInfo &info) = 0; |
| /* |
| * Register a logical display to receive a token. |
| * Each display pipeline in DRM is identified by its CRTC and Connector(s). |
| * On display connect(bootup or hotplug), clients should invoke this interface to |
| * establish the pipeline for the display and should get a DisplayToken |
| * populated with crtc and connnector(s) id's. Here onwards, Client should |
| * use this token to represent the display for any Perform operations if |
| * needed. |
| * |
| * [input]: disp_type - Peripheral / TV / Virtual |
| * [output]: DRMDisplayToken - CRTC and Connector id's for the display |
| * [return]: 0 on success, a negative error value otherwise |
| */ |
| virtual int RegisterDisplay(DRMDisplayType disp_type, DRMDisplayToken *tok) = 0; |
| |
| /* Client should invoke this interface on display disconnect. |
| * [input]: DRMDisplayToken - identifier for the display. |
| */ |
| virtual void UnregisterDisplay(const DRMDisplayToken &token) = 0; |
| |
| /* |
| * Creates and returns an instance of DRMAtomicReqInterface corresponding to a display token |
| * returned as part of RegisterDisplay API. Needs to be called per display. |
| * [input]: DRMDisplayToken that identifies a display pipeline |
| * [output]: Pointer to an instance of DRMAtomicReqInterface. |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int CreateAtomicReq(const DRMDisplayToken &token, DRMAtomicReqInterface **intf) = 0; |
| |
| /* |
| * Destroys the instance of DRMAtomicReqInterface |
| * [input]: Pointer to a DRMAtomicReqInterface |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int DestroyAtomicReq(DRMAtomicReqInterface *intf) = 0; |
| /* |
| * Sets the global scaler LUT |
| * [input]: LUT Info |
| * [return]: Error code if the API fails, 0 on success. |
| */ |
| virtual int SetScalerLUT(const DRMScalerLUTInfo &lut_info) = 0; |
| }; |
| |
| } // namespace sde_drm |
| #endif // __DRM_INTERFACE_H__ |