| /* |
| * Copyright (c) 2013 - 2016, 2018 - 2020, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _DISPLAY_CONFIG_H |
| #define _DISPLAY_CONFIG_H |
| |
| #include <vector> |
| |
| #include <gralloc_priv.h> |
| #include <qdMetaData.h> |
| #include <hardware/hwcomposer.h> |
| |
| // This header is for clients to use to set/get global display configuration. |
| // Only primary and external displays are supported here. |
| |
| namespace qdutils { |
| |
| |
| /* TODO: Have all the common enums that need be exposed to clients and which |
| * are also needed in hwc defined here. Remove such definitions we have in |
| * hwc_utils.h |
| */ |
| |
| // Use this enum to specify the dpy parameters where needed |
| enum { |
| // DO NOT CHANGE THE LEGACY DEFINES |
| DISPLAY_PRIMARY = 0, // = HWC_DISPLAY_PRIMARY |
| DISPLAY_EXTERNAL = 1, // = HWC_DISPLAY_EXTERNAL |
| DISPLAY_VIRTUAL = 2, // = HWC_DISPLAY_VIRTUAL |
| |
| // Additional displays only for vendor client (e.g. pp) reference |
| DISPLAY_BUILTIN_2 = 3, |
| DISPLAY_EXTERNAL_2 = 4, |
| }; |
| |
| // External Display states - used in setSecondaryDisplayStatus() |
| // To be consistent with the same defined in hwc_utils.h |
| enum { |
| EXTERNAL_OFFLINE = 0, |
| EXTERNAL_ONLINE, |
| EXTERNAL_PAUSE, |
| EXTERNAL_RESUME, |
| }; |
| |
| enum { |
| DISABLE_METADATA_DYN_REFRESH_RATE = 0, |
| ENABLE_METADATA_DYN_REFRESH_RATE, |
| SET_BINDER_DYN_REFRESH_RATE, |
| }; |
| |
| enum { |
| DEFAULT_MODE = 0, |
| VIDEO_MODE, |
| COMMAND_MODE, |
| }; |
| |
| enum { |
| DISPLAY_PORT_DEFAULT = 0, |
| DISPLAY_PORT_DSI, |
| DISPLAY_PORT_DTV, |
| DISPLAY_PORT_WRITEBACK, |
| DISPLAY_PORT_LVDS, |
| DISPLAY_PORT_EDP, |
| DISPLAY_PORT_DP, |
| }; |
| |
| // Display Attributes that are available to clients of this library |
| // Not to be confused with a similar struct in hwc_utils (in the hwc namespace) |
| typedef struct DisplayAttributes { |
| uint32_t vsync_period = 0; //nanoseconds |
| uint32_t xres = 0; |
| uint32_t yres = 0; |
| float xdpi = 0.0f; |
| float ydpi = 0.0f; |
| int panel_type = DISPLAY_PORT_DEFAULT; |
| bool is_yuv = false; |
| } DisplayAttributes_t; |
| |
| //============================================================================= |
| // The functions below run in the client process and wherever necessary |
| // do a binder call to HWC to get/set data. |
| |
| // Check if external display is connected. Useful to check before making |
| // calls for external displays |
| // Returns 1 if connected, 0 if disconnected, negative values on errors |
| int isExternalConnected(void); |
| |
| // Get display vsync period which is in nanoseconds |
| // i.e vsync_period = 1000000000l / fps |
| // Returns 0 on success, negative values on errors |
| int getDisplayAttributes(int dpy, DisplayAttributes_t& dpyattr); |
| |
| // get the active visible region for the display |
| // Returns 0 on success, negative values on errors |
| int getDisplayVisibleRegion(int dpy, hwc_rect_t &rect); |
| |
| // set the view frame information in hwc context from surfaceflinger |
| int setViewFrame(int dpy, int l, int t, int r, int b); |
| |
| // Set the secondary display status(pause/resume/offline etc.,) |
| int setSecondaryDisplayStatus(int dpy, uint32_t status); |
| |
| // Enable/Disable/Set refresh rate dynamically |
| int configureDynRefreshRate(uint32_t op, uint32_t refreshRate); |
| |
| // Returns the number of configs supported for the display on success. |
| // Returns -1 on error. |
| // Only primary display supported for now, value of dpy ignored. |
| int getConfigCount(int dpy); |
| |
| // Returns the index of config that is current set for the display on success. |
| // Returns -1 on error. |
| // Only primary display supported for now, value of dpy ignored. |
| int getActiveConfig(int dpy); |
| |
| // Sets the config for the display on success and returns 0. |
| // Returns -1 on error. |
| // Only primary display supported for now, value of dpy ignored |
| int setActiveConfig(int configIndex, int dpy); |
| |
| // Returns the attributes for the specified config for the display on success. |
| // Returns xres and yres as 0 on error. |
| // Only primary display supported for now, value of dpy ignored |
| DisplayAttributes getDisplayAttributes(int configIndex, int dpy); |
| |
| // Set the primary display mode to command or video mode |
| int setDisplayMode(int mode); |
| |
| // Sets the panel brightness of the primary display |
| int setPanelBrightness(int level); |
| |
| // Retrieves the current panel brightness value |
| int getPanelBrightness(); |
| |
| // Sets the specified bit clk value. |
| int setDsiClk(int dpy, uint64_t bitClk); |
| |
| // Retrieves the current bit clk value. |
| uint64_t getDsiClk(int dpy); |
| |
| // Get supported bit clk values. |
| int getSupportedBitClk(int dpy, std::vector<uint64_t>& bit_rates); |
| |
| // Sets the specified min and max luminance values. |
| int setPanelLuminanceAttributes(int dpy, float min_lum, float max_lum); |
| |
| }; //namespace |
| |
| |
| extern "C" int waitForComposerInit(); |
| #endif |