| /* |
| * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* Changes from Qualcomm Innovation Center are provided under the following license: |
| * |
| * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| * SPDX-License-Identifier: BSD-3-Clause-Clear |
| */ |
| |
| #define __STDC_FORMAT_MACROS |
| |
| #include <ctype.h> |
| #include <time.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm_lib_loader.h> |
| #include <drm_master.h> |
| #include <drm_res_mgr.h> |
| #include <fcntl.h> |
| #include <inttypes.h> |
| #include <linux/fb.h> |
| #include <math.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| #include <utils/constants.h> |
| #include <utils/debug.h> |
| #include <utils/formats.h> |
| #include <utils/sys.h> |
| #include <display/drm/sde_drm.h> |
| #include <private/color_params.h> |
| #include <utils/rect.h> |
| #include <utils/utils.h> |
| #include <utils/fence.h> |
| #include <private/hw_info_interface.h> |
| #include <dirent.h> |
| |
| #include <sstream> |
| #include <ctime> |
| #include <algorithm> |
| #include <string> |
| #include <unordered_map> |
| #include <utility> |
| #include <vector> |
| #include <limits> |
| |
| #include "hw_device_drm.h" |
| |
| #define __CLASS__ "HWDeviceDRM" |
| |
| #ifndef DRM_FORMAT_MOD_QCOM_COMPRESSED |
| #define DRM_FORMAT_MOD_QCOM_COMPRESSED fourcc_mod_code(QCOM, 1) |
| #endif |
| #ifndef DRM_FORMAT_MOD_QCOM_DX |
| #define DRM_FORMAT_MOD_QCOM_DX fourcc_mod_code(QCOM, 0x2) |
| #endif |
| #ifndef DRM_FORMAT_MOD_QCOM_TIGHT |
| #define DRM_FORMAT_MOD_QCOM_TIGHT fourcc_mod_code(QCOM, 0x4) |
| #endif |
| |
| #define DEST_SCALAR_OVERFETCH_SIZE 5 |
| |
| using std::string; |
| using std::to_string; |
| using std::fstream; |
| using std::unordered_map; |
| using std::stringstream; |
| using std::ifstream; |
| using std::ofstream; |
| using drm_utils::DRMMaster; |
| using drm_utils::DRMResMgr; |
| using drm_utils::DRMLibLoader; |
| using drm_utils::DRMBuffer; |
| using sde_drm::GetDRMManager; |
| using sde_drm::DestroyDRMManager; |
| using sde_drm::DRMDisplayType; |
| using sde_drm::DRMDisplayToken; |
| using sde_drm::DRMConnectorInfo; |
| using sde_drm::DRMPPFeatureInfo; |
| using sde_drm::DRMRect; |
| using sde_drm::DRMRotation; |
| using sde_drm::DRMBlendType; |
| using sde_drm::DRMSrcConfig; |
| using sde_drm::DRMOps; |
| using sde_drm::DRMTopology; |
| using sde_drm::DRMPowerMode; |
| using sde_drm::DRMSecureMode; |
| using sde_drm::DRMSecurityLevel; |
| using sde_drm::DRMCscType; |
| using sde_drm::DRMMultiRectMode; |
| using sde_drm::DRMCrtcInfo; |
| using sde_drm::DRMCWbCaptureMode; |
| |
| namespace sdm { |
| |
| std::atomic<uint32_t> HWDeviceDRM::hw_dest_scaler_blocks_used_(0); |
| HWCwbConfig HWDeviceDRM::cwb_config_ = {}; |
| std::mutex HWDeviceDRM::cwb_state_lock_; |
| bool HWDeviceDRM::reset_planes_luts_ = true; |
| |
| static PPBlock GetPPBlock(const HWToneMapLut &lut_type) { |
| PPBlock pp_block = kPPBlockMax; |
| switch (lut_type) { |
| case kDma1dIgc: |
| case kDma1dGc: |
| pp_block = kDGM; |
| break; |
| case kVig1dIgc: |
| case kVig3dGamut: |
| pp_block = kVIG; |
| break; |
| default: |
| DLOGE("Unknown PP Block"); |
| break; |
| } |
| return pp_block; |
| } |
| |
| static void GetDRMFormat(LayerBufferFormat format, uint32_t *drm_format, |
| uint64_t *drm_format_modifier) { |
| switch (format) { |
| case kFormatARGB8888: |
| *drm_format = DRM_FORMAT_BGRA8888; |
| break; |
| case kFormatRGBA8888: |
| *drm_format = DRM_FORMAT_ABGR8888; |
| break; |
| case kFormatRGBA8888Ubwc: |
| *drm_format = DRM_FORMAT_ABGR8888; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatRGBA5551: |
| *drm_format = DRM_FORMAT_ABGR1555; |
| break; |
| case kFormatRGBA4444: |
| *drm_format = DRM_FORMAT_ABGR4444; |
| break; |
| case kFormatBGRA8888: |
| *drm_format = DRM_FORMAT_ARGB8888; |
| break; |
| case kFormatRGBX8888: |
| *drm_format = DRM_FORMAT_XBGR8888; |
| break; |
| case kFormatRGBX8888Ubwc: |
| *drm_format = DRM_FORMAT_XBGR8888; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatBGRX8888: |
| *drm_format = DRM_FORMAT_XRGB8888; |
| break; |
| case kFormatRGB888: |
| *drm_format = DRM_FORMAT_BGR888; |
| break; |
| case kFormatBGR888: |
| *drm_format = DRM_FORMAT_RGB888; |
| break; |
| case kFormatRGB565: |
| *drm_format = DRM_FORMAT_BGR565; |
| break; |
| case kFormatBGR565: |
| *drm_format = DRM_FORMAT_RGB565; |
| break; |
| case kFormatBGR565Ubwc: |
| *drm_format = DRM_FORMAT_BGR565; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatRGBA1010102: |
| *drm_format = DRM_FORMAT_ABGR2101010; |
| break; |
| case kFormatRGBA1010102Ubwc: |
| *drm_format = DRM_FORMAT_ABGR2101010; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatARGB2101010: |
| *drm_format = DRM_FORMAT_BGRA1010102; |
| break; |
| case kFormatRGBX1010102: |
| *drm_format = DRM_FORMAT_XBGR2101010; |
| break; |
| case kFormatRGBX1010102Ubwc: |
| *drm_format = DRM_FORMAT_XBGR2101010; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatXRGB2101010: |
| *drm_format = DRM_FORMAT_BGRX1010102; |
| break; |
| case kFormatBGRA1010102: |
| *drm_format = DRM_FORMAT_ARGB2101010; |
| break; |
| case kFormatABGR2101010: |
| *drm_format = DRM_FORMAT_RGBA1010102; |
| break; |
| case kFormatBGRX1010102: |
| *drm_format = DRM_FORMAT_XRGB2101010; |
| break; |
| case kFormatXBGR2101010: |
| *drm_format = DRM_FORMAT_RGBX1010102; |
| break; |
| case kFormatYCbCr420SemiPlanar: |
| *drm_format = DRM_FORMAT_NV12; |
| break; |
| case kFormatYCbCr420SemiPlanarVenus: |
| *drm_format = DRM_FORMAT_NV12; |
| break; |
| case kFormatYCbCr420SPVenusUbwc: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| case kFormatYCbCr420SPVenusTile: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_TILE; |
| break; |
| case kFormatYCrCb420SemiPlanar: |
| *drm_format = DRM_FORMAT_NV21; |
| break; |
| case kFormatYCrCb420SemiPlanarVenus: |
| *drm_format = DRM_FORMAT_NV21; |
| break; |
| case kFormatYCbCr420P010: |
| case kFormatYCbCr420P010Venus: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_DX; |
| break; |
| case kFormatYCbCr420P010Ubwc: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED | |
| DRM_FORMAT_MOD_QCOM_DX; |
| break; |
| case kFormatYCbCr420P010Tile: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_TILE | |
| DRM_FORMAT_MOD_QCOM_DX; |
| break; |
| case kFormatYCbCr420TP10Ubwc: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED | |
| DRM_FORMAT_MOD_QCOM_DX | DRM_FORMAT_MOD_QCOM_TIGHT; |
| break; |
| case kFormatYCbCr420TP10Tile: |
| *drm_format = DRM_FORMAT_NV12; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_TILE | |
| DRM_FORMAT_MOD_QCOM_DX | DRM_FORMAT_MOD_QCOM_TIGHT; |
| break; |
| case kFormatYCbCr422H2V1SemiPlanar: |
| *drm_format = DRM_FORMAT_NV16; |
| break; |
| case kFormatYCrCb422H2V1SemiPlanar: |
| *drm_format = DRM_FORMAT_NV61; |
| break; |
| case kFormatYCrCb420PlanarStride16: |
| *drm_format = DRM_FORMAT_YVU420; |
| break; |
| case kFormatRGBA16161616F: |
| *drm_format = DRM_FORMAT_ABGR16161616F; |
| break; |
| case kFormatRGBA16161616FUbwc: |
| *drm_format = DRM_FORMAT_ABGR16161616F; |
| *drm_format_modifier = DRM_FORMAT_MOD_QCOM_COMPRESSED; |
| break; |
| default: |
| DLOGW("Unsupported format %s", GetFormatString(format)); |
| } |
| } |
| |
| FrameBufferObject::FrameBufferObject(uint32_t fb_id, LayerBufferFormat format, |
| uint32_t width, uint32_t height, bool shallow) |
| :fb_id_(fb_id), format_(format), width_(width), height_(height), |
| shallow_(shallow) {} |
| |
| FrameBufferObject::~FrameBufferObject() { |
| // Don't call RemoveFbId in case its a shallow copy from other display |
| if (shallow_) { |
| DLOGI("FBID: %d is a shallow copy", fb_id_); |
| return; |
| } |
| |
| DRMMaster *master; |
| DRMMaster::GetInstance(&master); |
| int ret = master->RemoveFbId(fb_id_); |
| if (ret < 0) { |
| DLOGE("Removing fb_id %d failed with error %d", fb_id_, errno); |
| } |
| } |
| |
| uint32_t FrameBufferObject::GetFbId() { |
| return fb_id_; |
| } |
| |
| bool FrameBufferObject::IsEqual(LayerBufferFormat format, |
| uint32_t width, uint32_t height) { |
| return (format == format_ && width == width_ && height == height_); |
| } |
| |
| HWDeviceDRM::Registry::Registry(BufferAllocator *buffer_allocator) : |
| buffer_allocator_(buffer_allocator) { |
| int value = 0; |
| if (Debug::GetProperty(DISABLE_FBID_CACHE, &value) == kErrorNone) { |
| disable_fbid_cache_ = (value == 1); |
| } |
| } |
| |
| void HWDeviceDRM::Registry::Register(HWLayersInfo *hw_layers_info) { |
| uint32_t hw_layer_count = UINT32(hw_layers_info->hw_layers.size()); |
| |
| for (uint32_t i = 0; i < hw_layer_count; i++) { |
| Layer &layer = hw_layers_info->hw_layers.at(i); |
| LayerBuffer input_buffer = layer.input_buffer; |
| HWRotatorSession *hw_rotator_session = &hw_layers_info->config[i].hw_rotator_session; |
| HWRotateInfo *hw_rotate_info = &hw_rotator_session->hw_rotate_info[0]; |
| fbid_cache_limit_ = input_buffer.flags.video ? VIDEO_FBID_LIMIT : UI_FBID_LIMIT; |
| |
| if (hw_rotator_session->mode == kRotatorOffline && hw_rotate_info->valid) { |
| input_buffer = hw_rotator_session->output_buffer; |
| fbid_cache_limit_ = OFFLINE_ROTATOR_FBID_LIMIT; |
| } |
| |
| if (input_buffer.flags.interlace) { |
| input_buffer.width *= 2; |
| input_buffer.height /= 2; |
| } |
| MapBufferToFbId(&layer, input_buffer); |
| } |
| } |
| |
| int HWDeviceDRM::Registry::CreateFbId(const LayerBuffer &buffer, uint32_t *fb_id) { |
| DRMMaster *master = nullptr; |
| DRMMaster::GetInstance(&master); |
| int ret = -1; |
| |
| if (!master) { |
| DLOGE("Failed to acquire DRM Master instance"); |
| return ret; |
| } |
| |
| DRMBuffer layout{}; |
| AllocatedBufferInfo buf_info{}; |
| buf_info.fd = layout.fd = buffer.planes[0].fd; |
| buf_info.aligned_width = layout.width = buffer.width; |
| buf_info.aligned_height = layout.height = buffer.height; |
| buf_info.format = buffer.format; |
| buf_info.usage = buffer.usage; |
| GetDRMFormat(buf_info.format, &layout.drm_format, &layout.drm_format_modifier); |
| buffer_allocator_->GetBufferLayout(buf_info, layout.stride, layout.offset, &layout.num_planes); |
| ret = master->CreateFbId(layout, fb_id); |
| if (ret < 0) { |
| DLOGE("CreateFbId failed. width %d, height %d, format: %s, usage %d, stride %u, " |
| "unaligned_width %d, unaligned_height %d, error %d", layout.width, layout.height, |
| GetFormatString(buf_info.format), buf_info.usage, layout.stride[0], |
| buffer.unaligned_width, buffer.unaligned_height, errno); |
| } |
| |
| return ret; |
| } |
| |
| void HWDeviceDRM::Registry::MapBufferToFbId(Layer* layer, const LayerBuffer &buffer) { |
| if (buffer.planes[0].fd < 0) { |
| return; |
| } |
| |
| uint64_t handle_id = buffer.handle_id; |
| if (!handle_id || disable_fbid_cache_) { |
| // In legacy path, clear fb_id map in each frame. |
| layer->buffer_map->buffer_map.clear(); |
| } else { |
| if (layer->composition == kCompositionCWBTarget) { |
| layer->buffer_map->buffer_map.clear(); |
| auto it2 = output_buffer_map_.find(handle_id); |
| if (it2 != output_buffer_map_.end()) { |
| FrameBufferObject *fb_obj = static_cast<FrameBufferObject*>(it2->second.get()); |
| if (fb_obj->IsEqual(buffer.format, buffer.width, buffer.height)) { |
| layer->buffer_map->buffer_map[handle_id] = output_buffer_map_[handle_id]; |
| // Found fb_id for given handle_id key |
| return; |
| } |
| } |
| } |
| auto it = layer->buffer_map->buffer_map.find(handle_id); |
| if (it != layer->buffer_map->buffer_map.end()) { |
| FrameBufferObject *fb_obj = static_cast<FrameBufferObject*>(it->second.get()); |
| if (fb_obj->IsEqual(buffer.format, buffer.width, buffer.height)) { |
| // Found fb_id for given handle_id key |
| return; |
| } else { |
| // Erase from fb_id map if format or size have been modified |
| layer->buffer_map->buffer_map.erase(it); |
| } |
| } |
| |
| if (layer->buffer_map->buffer_map.size() >= fbid_cache_limit_) { |
| // Clear fb_id map, if the size reaches cache limit. |
| layer->buffer_map->buffer_map.clear(); |
| } |
| } |
| |
| uint32_t fb_id = 0; |
| if (CreateFbId(buffer, &fb_id) >= 0) { |
| // Create and cache the fb_id in map |
| layer->buffer_map->buffer_map[handle_id] = std::make_shared<FrameBufferObject>(fb_id, |
| buffer.format, buffer.width, buffer.height); |
| } |
| } |
| |
| void HWDeviceDRM::Registry::MapOutputBufferToFbId(std::shared_ptr<LayerBuffer> output_buffer) { |
| if (output_buffer->planes[0].fd < 0) { |
| return; |
| } |
| |
| uint64_t handle_id = output_buffer->handle_id; |
| if (!handle_id || disable_fbid_cache_) { |
| // In legacy path, clear output buffer map in each frame. |
| output_buffer_map_.clear(); |
| } else { |
| auto it = output_buffer_map_.find(handle_id); |
| if (it != output_buffer_map_.end()) { |
| FrameBufferObject *fb_obj = static_cast<FrameBufferObject*>(it->second.get()); |
| if (fb_obj->IsEqual(output_buffer->format, output_buffer->width, output_buffer->height)) { |
| return; |
| } else { |
| output_buffer_map_.erase(it); |
| } |
| } |
| |
| if (output_buffer_map_.size() >= UI_FBID_LIMIT) { |
| // Clear output buffer map, if the size reaches cache limit. |
| output_buffer_map_.clear(); |
| } |
| } |
| |
| uint32_t fb_id = 0; |
| if (CreateFbId(*output_buffer, &fb_id) >= 0) { |
| output_buffer_map_[handle_id] = std::make_shared<FrameBufferObject>(fb_id, |
| output_buffer->format, output_buffer->width, output_buffer->height); |
| } |
| } |
| |
| void HWDeviceDRM::Registry::Clear() { |
| output_buffer_map_.clear(); |
| } |
| |
| uint32_t HWDeviceDRM::Registry::GetFbId(Layer *layer, uint64_t handle_id) { |
| auto it = layer->buffer_map->buffer_map.find(handle_id); |
| if (it != layer->buffer_map->buffer_map.end()) { |
| FrameBufferObject *fb_obj = static_cast<FrameBufferObject*>(it->second.get()); |
| return fb_obj->GetFbId(); |
| } |
| |
| return 0; |
| } |
| |
| uint32_t HWDeviceDRM::Registry::GetOutputFbId(uint64_t handle_id) { |
| auto it = output_buffer_map_.find(handle_id); |
| if (it != output_buffer_map_.end()) { |
| FrameBufferObject *fb_obj = static_cast<FrameBufferObject*>(it->second.get()); |
| return fb_obj->GetFbId(); |
| } |
| |
| return 0; |
| } |
| |
| HWDeviceDRM::HWDeviceDRM(BufferAllocator *buffer_allocator, HWInfoInterface *hw_info_intf) |
| : hw_info_intf_(hw_info_intf), registry_(buffer_allocator) { |
| hw_info_intf_ = hw_info_intf; |
| } |
| |
| DisplayError HWDeviceDRM::Init() { |
| int ret = 0; |
| DRMMaster *drm_master = {}; |
| DRMMaster::GetInstance(&drm_master); |
| drm_master->GetHandle(&dev_fd_); |
| DRMLibLoader *drm_lib_loader = DRMLibLoader::GetInstance(); |
| |
| if (!drm_lib_loader) { |
| DLOGW("Failed to retrieve DRMLibLoader instance"); |
| return kErrorResources; |
| } |
| |
| drm_lib_loader->FuncGetDRMManager()(dev_fd_, &drm_mgr_intf_); |
| |
| if (-1 == display_id_) { |
| if (drm_mgr_intf_->RegisterDisplay(disp_type_, &token_)) { |
| DLOGE("RegisterDisplay (by type) failed for %s", device_name_); |
| return kErrorResources; |
| } |
| } else if (drm_mgr_intf_->RegisterDisplay(display_id_, &token_)) { |
| DLOGE("RegisterDisplay (by id) failed for %s - %d", device_name_, display_id_); |
| return kErrorResources; |
| } |
| |
| if (token_.conn_id > INT32_MAX) { |
| DLOGE("Connector id %u beyond supported range", token_.conn_id); |
| drm_mgr_intf_->UnregisterDisplay(&token_); |
| return kErrorNotSupported; |
| } |
| |
| display_id_ = static_cast<int32_t>(token_.conn_id); |
| |
| ret = drm_mgr_intf_->CreateAtomicReq(token_, &drm_atomic_intf_); |
| if (ret) { |
| DLOGE("Failed creating atomic request for connector id %u. Error: %d.", token_.conn_id, ret); |
| drm_mgr_intf_->UnregisterDisplay(&token_); |
| return kErrorResources; |
| } |
| |
| ret = drm_mgr_intf_->GetConnectorInfo(token_.conn_id, &connector_info_); |
| if (ret) { |
| DLOGE("Failed getting info for connector id %u. Error: %d.", token_.conn_id, ret); |
| drm_mgr_intf_->DestroyAtomicReq(drm_atomic_intf_); |
| drm_atomic_intf_ = {}; |
| drm_mgr_intf_->UnregisterDisplay(&token_); |
| return kErrorHardware; |
| } |
| |
| if (!connector_info_.is_connected || connector_info_.modes.empty()) { |
| DLOGW("Device removal detected on connector id %u. Connector status %s and %zu modes.", |
| token_.conn_id, connector_info_.is_connected ? "connected":"disconnected", |
| connector_info_.modes.size()); |
| drm_mgr_intf_->DestroyAtomicReq(drm_atomic_intf_); |
| drm_atomic_intf_ = {}; |
| drm_mgr_intf_->UnregisterDisplay(&token_); |
| return kErrorDeviceRemoved; |
| } |
| |
| hw_info_intf_->GetHWResourceInfo(&hw_resource_); |
| |
| InitializeConfigs(); |
| GetCWBCapabilities(); |
| PopulateHWPanelInfo(); |
| UpdateMixerAttributes(); |
| |
| // TODO(user): In future, remove has_qseed3 member, add version and pass version to constructor |
| if (hw_resource_.has_qseed3) { |
| hw_scale_ = new HWScaleDRM(HWScaleDRM::Version::V2); |
| } |
| |
| std::unique_ptr<HWColorManagerDrm> hw_color_mgr(new HWColorManagerDrm()); |
| hw_color_mgr_ = std::move(hw_color_mgr); |
| |
| int value = 0; |
| if (Debug::GetProperty(ASPECT_RATIO_THRESHOLD, &value) == kErrorNone) { |
| aspect_ratio_threshold_ = 1 + (FLOAT(value) / 100); |
| DLOGI("aspect_ratio_threshold_: %f", aspect_ratio_threshold_); |
| } |
| |
| value = 0; |
| if (Debug::GetProperty(FORCE_TONEMAPPING, &value) == kErrorNone) { |
| force_tonemapping_ = (value == 1); |
| DLOGI("force_tonemapping_ %d", force_tonemapping_); |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::Deinit() { |
| DisplayError err = kErrorNone; |
| // first_null_cycle_ = false after the first power-mode NullCommit is completed, or the first |
| // frame commit handled the power transition. |
| // Power-on will set the CRTC_SET_MODE anytime power mode is not deferred to first commit. |
| // Without first commit, if display is disconnected, CRTC_SET_MODE is not set to NULL, |
| // this leads to a synchronization issue. |
| // So because of previously successful NullCommit, set CRTC_SET_MODE to NULL here for proper sync. |
| |
| // first_cycle = false after the first frame commit is completed. |
| // A null-commit here is also needed if the first commit has gone through. e.g., If a |
| // display is connected and disconnected, HWDeviceDRM::Deinit() may be called |
| // before any driver commit happened on the device. The driver may have removed any not-in-use |
| // connector (i.e., any connector which did not have a display commit on it and a crtc path |
| // setup), so token_.conn_id may have been removed if there was no commit, resulting in |
| // drmModeAtomicCommit() failure with ENOENT, 'No such file or directory'. |
| if (!first_cycle_ || !first_null_cycle_) { |
| ClearSolidfillStages(); |
| ClearNoiseLayerConfig(); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, token_.conn_id, 0); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, DRMPowerMode::OFF); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_MODE, token_.crtc_id, nullptr); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 0); |
| #ifdef TRUSTED_VM |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::CRTC_SET_VM_REQ_STATE, token_.crtc_id, |
| sde_drm::DRMVMRequestState::RELEASE); |
| #endif |
| int ret = NullCommit(true /* synchronous */, false /* retain_planes */); |
| if (ret) { |
| DLOGE("Commit failed with error: %d", ret); |
| err = kErrorHardware; |
| } |
| } |
| delete hw_scale_; |
| registry_.Clear(); |
| display_attributes_ = {}; |
| drm_mgr_intf_->DestroyAtomicReq(drm_atomic_intf_); |
| drm_atomic_intf_ = {}; |
| drm_mgr_intf_->UnregisterDisplay(&token_); |
| hw_dest_scaler_blocks_used_ -= dest_scaler_blocks_used_; |
| return err; |
| } |
| |
| void HWDeviceDRM::GetCWBCapabilities() { |
| sde_drm::DRMConnectorsInfo conns_info = {}; |
| int ret = drm_mgr_intf_->GetConnectorsInfo(&conns_info); |
| if (ret) { |
| DLOGW("DRM Driver error %d while getting Connectors info.", ret); |
| return; |
| } |
| for (auto &iter : conns_info) { |
| if (iter.second.type == DRM_MODE_CONNECTOR_VIRTUAL) { |
| has_cwb_crop_ = static_cast<bool>(iter.second.modes[current_mode_index_].has_cwb_crop); |
| has_dedicated_cwb_ = |
| static_cast<bool>(iter.second.modes[current_mode_index_].has_dedicated_cwb); |
| has_cwb_dither_ = static_cast<bool>(iter.second.has_cwb_dither); |
| break; |
| } |
| } |
| } |
| |
| DisplayError HWDeviceDRM::GetDisplayId(int32_t *display_id) { |
| *display_id = display_id_; |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::InitializeConfigs() { |
| current_mode_index_ = 0; |
| uint32_t modes_count = connector_info_.modes.size(); |
| uint32_t panel_mode_pref = (connector_info_.panel_mode == sde_drm::DRMPanelMode::COMMAND) |
| ? DRM_MODE_FLAG_CMD_MODE_PANEL |
| : DRM_MODE_FLAG_VID_MODE_PANEL; |
| |
| // Set mode with preferred panel mode if supported, otherwise set based on capability |
| for (uint32_t mode_index = 0; mode_index < modes_count; mode_index++) { |
| uint32_t sub_mode_index = connector_info_.modes[mode_index].curr_submode_index; |
| connector_info_.modes[mode_index].curr_compression_mode = |
| connector_info_.modes[mode_index].sub_modes[sub_mode_index].panel_compression_mode; |
| if (panel_mode_pref & |
| connector_info_.modes[mode_index].sub_modes[sub_mode_index].panel_mode_caps) { |
| connector_info_.modes[mode_index].cur_panel_mode = panel_mode_pref; |
| } else if (panel_mode_pref == DRM_MODE_FLAG_VID_MODE_PANEL) { |
| connector_info_.modes[mode_index].cur_panel_mode = DRM_MODE_FLAG_VID_MODE_PANEL; |
| } else if (panel_mode_pref == DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| connector_info_.modes[mode_index].cur_panel_mode = DRM_MODE_FLAG_CMD_MODE_PANEL; |
| } |
| // Add mode variant if both panel modes are supported |
| if (connector_info_.modes[mode_index].sub_modes[sub_mode_index].panel_mode_caps & |
| DRM_MODE_FLAG_CMD_MODE_PANEL && |
| connector_info_.modes[mode_index].sub_modes[sub_mode_index].panel_mode_caps & |
| DRM_MODE_FLAG_VID_MODE_PANEL) { |
| sde_drm::DRMModeInfo mode_item = connector_info_.modes[mode_index]; |
| mode_item.cur_panel_mode = |
| (connector_info_.modes[mode_index].cur_panel_mode == DRM_MODE_FLAG_CMD_MODE_PANEL) |
| ? DRM_MODE_FLAG_VID_MODE_PANEL |
| : DRM_MODE_FLAG_CMD_MODE_PANEL; |
| connector_info_.modes.push_back(mode_item); |
| } |
| } |
| // Update current mode with preferred mode |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if (connector_info_.modes[mode_index].mode.type & DRM_MODE_TYPE_PREFERRED) { |
| DLOGI("Updating current display %d-%d mode %d to preferred mode %d.", display_id_, |
| disp_type_, current_mode_index_, mode_index); |
| current_mode_index_ = mode_index; |
| break; |
| } |
| } |
| |
| display_attributes_.resize(connector_info_.modes.size()); |
| |
| uint32_t width = connector_info_.modes[current_mode_index_].mode.hdisplay; |
| uint32_t height = connector_info_.modes[current_mode_index_].mode.vdisplay; |
| for (uint32_t i = 0; i < connector_info_.modes.size(); i++) { |
| auto &mode = connector_info_.modes[i].mode; |
| if (mode.hdisplay != width || mode.vdisplay != height) { |
| resolution_switch_enabled_ = true; |
| } |
| PopulateDisplayAttributes(i); |
| } |
| SetDisplaySwitchMode(current_mode_index_); |
| } |
| |
| DisplayError HWDeviceDRM::PopulateDisplayAttributes(uint32_t index) { |
| drmModeModeInfo mode = {}; |
| sde_drm::DRMModeInfo conn_mode = {}; |
| uint32_t mm_width = 0; |
| uint32_t mm_height = 0; |
| DRMTopology topology = DRMTopology::SINGLE_LM; |
| |
| if (default_mode_) { |
| DRMResMgr *res_mgr = nullptr; |
| int ret = DRMResMgr::GetInstance(&res_mgr); |
| if (ret < 0) { |
| DLOGE("Failed to acquire DRMResMgr instance"); |
| return kErrorResources; |
| } |
| |
| res_mgr->GetMode(&mode); |
| res_mgr->GetDisplayDimInMM(&mm_width, &mm_height); |
| } else { |
| uint32_t submode_idx = connector_info_.modes[index].curr_submode_index; |
| conn_mode = connector_info_.modes[index]; |
| mode = conn_mode.mode; |
| mm_width = connector_info_.mmWidth; |
| mm_height = connector_info_.mmHeight; |
| topology = connector_info_.modes[index].sub_modes[submode_idx].topology; |
| if (connector_info_.modes[index].sub_modes[submode_idx].panel_mode_caps & |
| DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| display_attributes_[index].smart_panel = true; |
| } |
| } |
| |
| display_attributes_[index].x_pixels = mode.hdisplay; |
| display_attributes_[index].y_pixels = mode.vdisplay; |
| display_attributes_[index].fps = mode.vrefresh; |
| display_attributes_[index].vsync_period_ns = |
| UINT32(1000000000L / display_attributes_[index].fps); |
| |
| /* |
| Active Front Sync Back |
| Region Porch Porch |
| <-----------------------><----------------><-------------><--------------> |
| <----- [hv]display -----> |
| <------------- [hv]sync_start ------------> |
| <--------------------- [hv]sync_end ---------------------> |
| <-------------------------------- [hv]total -----------------------------> |
| */ |
| |
| display_attributes_[index].v_front_porch = mode.vsync_start - mode.vdisplay; |
| bool adjusted = (connector_info_.dyn_bitclk_support && |
| conn_mode.fp_type == sde_drm::DynamicFrontPorchType::VERTICAL && |
| !conn_mode.dyn_fp_list.empty()); |
| if (adjusted) { |
| display_attributes_[index].v_front_porch = |
| *std::min_element(conn_mode.dyn_fp_list.begin(), conn_mode.dyn_fp_list.end()); |
| } |
| display_attributes_[index].v_pulse_width = mode.vsync_end - mode.vsync_start; |
| display_attributes_[index].v_back_porch = mode.vtotal - mode.vsync_end; |
| display_attributes_[index].v_total = mode.vtotal; |
| display_attributes_[index].h_total = mode.htotal; |
| |
| // TODO(user): This clock should no longer be used as mode's pixel clock for RFI connectors. |
| // Driver can expose list of dynamic pixel clocks, userspace needs to support dynamic change. |
| display_attributes_[index].clock_khz = mode.clock; |
| |
| // If driver doesn't return panel width/height information, default to 320 dpi |
| if (INT(mm_width) <= 0 || INT(mm_height) <= 0) { |
| mm_width = UINT32(((FLOAT(mode.hdisplay) * 25.4f) / 320.0f) + 0.5f); |
| mm_height = UINT32(((FLOAT(mode.vdisplay) * 25.4f) / 320.0f) + 0.5f); |
| DLOGW("Driver doesn't report panel physical width and height - defaulting to 320dpi"); |
| } |
| |
| display_attributes_[index].x_dpi = (FLOAT(mode.hdisplay) * 25.4f) / FLOAT(mm_width); |
| display_attributes_[index].y_dpi = (FLOAT(mode.vdisplay) * 25.4f) / FLOAT(mm_height); |
| SetTopology(topology, &display_attributes_[index].topology); |
| SetTopologySplit(display_attributes_[index].topology, |
| &display_attributes_[index].topology_num_split); |
| display_attributes_[index].is_device_split = (display_attributes_[index].topology_num_split > 1); |
| |
| DLOGI( |
| "Display %d-%d attributes[%d]: WxH: %dx%d, DPI: %fx%f, FPS: %d, LM_SPLIT: %d, V_BACK_PORCH:" |
| " %d, V_FRONT_PORCH: %d [RFI Adjusted : %s], V_PULSE_WIDTH: %d, V_TOTAL: %d, H_TOTAL: %d," |
| " CLK: %dKHZ, TOPOLOGY: %d [SPLIT NUMBER: %d], HW_SPLIT: %d", display_id_, disp_type_, |
| index, display_attributes_[index].x_pixels, display_attributes_[index].y_pixels, |
| display_attributes_[index].x_dpi, display_attributes_[index].y_dpi, |
| display_attributes_[index].fps, display_attributes_[index].is_device_split, |
| display_attributes_[index].v_back_porch, display_attributes_[index].v_front_porch, |
| adjusted ? "True" : "False", display_attributes_[index].v_pulse_width, |
| display_attributes_[index].v_total, display_attributes_[index].h_total, |
| display_attributes_[index].clock_khz, display_attributes_[index].topology, |
| display_attributes_[index].topology_num_split, mixer_attributes_.split_type); |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::PopulateHWPanelInfo() { |
| hw_panel_info_ = {}; |
| |
| snprintf(hw_panel_info_.panel_name, sizeof(hw_panel_info_.panel_name), "%s", |
| connector_info_.panel_name.c_str()); |
| |
| uint32_t index = current_mode_index_; |
| uint32_t sub_mode_index = connector_info_.modes[index].curr_submode_index; |
| hw_panel_info_.split_info.left_split = display_attributes_[index].x_pixels; |
| if (display_attributes_[index].is_device_split) { |
| hw_panel_info_.split_info.left_split = hw_panel_info_.split_info.right_split = |
| display_attributes_[index].x_pixels / 2; |
| } |
| |
| hw_panel_info_.partial_update = connector_info_.modes[index].num_roi; |
| hw_panel_info_.left_roi_count = UINT32(connector_info_.modes[index].num_roi); |
| hw_panel_info_.right_roi_count = UINT32(connector_info_.modes[index].num_roi); |
| hw_panel_info_.left_align = connector_info_.modes[index].xstart; |
| hw_panel_info_.top_align = connector_info_.modes[index].ystart; |
| hw_panel_info_.width_align = connector_info_.modes[index].walign; |
| hw_panel_info_.height_align = connector_info_.modes[index].halign; |
| hw_panel_info_.min_roi_width = connector_info_.modes[index].wmin; |
| hw_panel_info_.min_roi_height = connector_info_.modes[index].hmin; |
| hw_panel_info_.needs_roi_merge = connector_info_.modes[index].roi_merge; |
| hw_panel_info_.transfer_time_us = connector_info_.modes[index].transfer_time_us; |
| hw_panel_info_.transfer_time_us_min = (connector_info_.modes[index].transfer_time_us_min) |
| ? connector_info_.modes[index].transfer_time_us_min |
| : 1; |
| hw_panel_info_.transfer_time_us_max = connector_info_.modes[index].transfer_time_us_max; |
| hw_panel_info_.allowed_mode_switch = connector_info_.modes[index].allowed_mode_switch; |
| hw_panel_info_.panel_mode_caps = |
| connector_info_.modes[index].sub_modes[sub_mode_index].panel_mode_caps; |
| hw_panel_info_.dynamic_fps = connector_info_.dynamic_fps; |
| hw_panel_info_.qsync_support = connector_info_.qsync_support; |
| hw_panel_info_.has_cwb_crop = has_cwb_crop_; |
| drmModeModeInfo current_mode = connector_info_.modes[current_mode_index_].mode; |
| if (hw_panel_info_.dynamic_fps) { |
| uint32_t min_fps = current_mode.vrefresh; |
| uint32_t max_fps = current_mode.vrefresh; |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((current_mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (current_mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay)) { |
| if (min_fps > connector_info_.modes[mode_index].mode.vrefresh) { |
| min_fps = connector_info_.modes[mode_index].mode.vrefresh; |
| } |
| if (max_fps < connector_info_.modes[mode_index].mode.vrefresh) { |
| max_fps = connector_info_.modes[mode_index].mode.vrefresh; |
| } |
| } |
| } |
| hw_panel_info_.min_fps = min_fps; |
| hw_panel_info_.max_fps = max_fps; |
| } else { |
| hw_panel_info_.min_fps = current_mode.vrefresh; |
| hw_panel_info_.max_fps = current_mode.vrefresh; |
| } |
| |
| uint32_t transfer_time_us_min = hw_panel_info_.transfer_time_us; |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((current_mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (current_mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay)) { |
| if (transfer_time_us_min > connector_info_.modes[mode_index].transfer_time_us) { |
| transfer_time_us_min = connector_info_.modes[mode_index].transfer_time_us; |
| } |
| } |
| } |
| |
| if (hw_panel_info_.transfer_time_us_min <= 1) { |
| hw_panel_info_.transfer_time_us_min = transfer_time_us_min; |
| } |
| |
| if (connector_info_.qsync_fps > 0) { |
| // For command mode panel, driver will set connector property qsync_fps |
| hw_panel_info_.qsync_fps = connector_info_.qsync_fps; |
| } else { |
| // if for video mode panel, qsync_fps is not set, take default min_fps value |
| hw_panel_info_.qsync_fps = hw_panel_info_.min_fps; |
| } |
| |
| hw_panel_info_.is_primary_panel = connector_info_.is_primary; |
| hw_panel_info_.is_pluggable = 0; |
| hw_panel_info_.hdr_enabled = connector_info_.panel_hdr_prop.hdr_enabled; |
| // Convert the luminance values to cd/m^2 units. |
| hw_panel_info_.peak_luminance = FLOAT(connector_info_.panel_hdr_prop.peak_brightness) / 10000.0f; |
| hw_panel_info_.blackness_level = FLOAT(connector_info_.panel_hdr_prop.blackness_level) / 10000.0f; |
| hw_panel_info_.average_luminance = FLOAT(connector_info_.panel_hdr_prop.peak_brightness + |
| connector_info_.panel_hdr_prop.blackness_level) / |
| (2 * 10000.0f); |
| hw_panel_info_.primaries.white_point[0] = connector_info_.panel_hdr_prop.display_primaries[0]; |
| hw_panel_info_.primaries.white_point[1] = connector_info_.panel_hdr_prop.display_primaries[1]; |
| hw_panel_info_.primaries.red[0] = connector_info_.panel_hdr_prop.display_primaries[2]; |
| hw_panel_info_.primaries.red[1] = connector_info_.panel_hdr_prop.display_primaries[3]; |
| hw_panel_info_.primaries.green[0] = connector_info_.panel_hdr_prop.display_primaries[4]; |
| hw_panel_info_.primaries.green[1] = connector_info_.panel_hdr_prop.display_primaries[5]; |
| hw_panel_info_.primaries.blue[0] = connector_info_.panel_hdr_prop.display_primaries[6]; |
| hw_panel_info_.primaries.blue[1] = connector_info_.panel_hdr_prop.display_primaries[7]; |
| hw_panel_info_.dyn_bitclk_support = connector_info_.dyn_bitclk_support; |
| |
| // no supprt for 90 rotation only flips or 180 supported |
| hw_panel_info_.panel_orientation.rotation = 0; |
| hw_panel_info_.panel_orientation.flip_horizontal = |
| (connector_info_.panel_orientation == DRMRotation::FLIP_H) || |
| (connector_info_.panel_orientation == DRMRotation::ROT_180); |
| hw_panel_info_.panel_orientation.flip_vertical = |
| (connector_info_.panel_orientation == DRMRotation::FLIP_V) || |
| (connector_info_.panel_orientation == DRMRotation::ROT_180); |
| |
| GetHWDisplayPortAndMode(); |
| GetHWPanelMaxBrightness(); |
| if (connector_info_.modes[current_mode_index_].cur_panel_mode & DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| hw_panel_info_.mode = kModeCommand; |
| } |
| |
| if (connector_info_.modes[current_mode_index_].cur_panel_mode & |
| DRM_MODE_FLAG_VID_MODE_PANEL) { |
| hw_panel_info_.mode = kModeVideo; |
| } |
| |
| DLOGI_IF(kTagDriverConfig, "%s, Panel Interface = %s, Panel Mode = %s, Is Primary = %d", |
| device_name_, interface_str_.c_str(), |
| hw_panel_info_.mode == kModeVideo ? "Video" : "Command", |
| hw_panel_info_.is_primary_panel); |
| DLOGI_IF(kTagDriverConfig, "Partial Update = %d, Dynamic FPS = %d, HDR Panel = %d QSync = %d", |
| hw_panel_info_.partial_update, hw_panel_info_.dynamic_fps, hw_panel_info_.hdr_enabled, |
| hw_panel_info_.qsync_support); |
| DLOGI_IF(kTagDriverConfig, "Align: left = %d, width = %d, top = %d, height = %d", |
| hw_panel_info_.left_align, hw_panel_info_.width_align, hw_panel_info_.top_align, |
| hw_panel_info_.height_align); |
| DLOGI_IF(kTagDriverConfig, "ROI: min_width = %d, min_height = %d, need_merge = %d", |
| hw_panel_info_.min_roi_width, hw_panel_info_.min_roi_height, |
| hw_panel_info_.needs_roi_merge); |
| DLOGI_IF(kTagDriverConfig, "FPS: min = %d, max = %d", hw_panel_info_.min_fps, |
| hw_panel_info_.max_fps); |
| DLOGI_IF(kTagDriverConfig, "Left Split = %d, Right Split = %d", |
| hw_panel_info_.split_info.left_split, hw_panel_info_.split_info.right_split); |
| DLOGI_IF(kTagDriverConfig, "Mode Transfer time = %d us", hw_panel_info_.transfer_time_us); |
| DLOGI_IF(kTagDriverConfig, "Panel Minimum Transfer time = %d us", |
| hw_panel_info_.transfer_time_us_min); |
| DLOGI_IF(kTagDriverConfig, "Panel Maximum Transfer time = %d us", |
| hw_panel_info_.transfer_time_us_max); |
| DLOGI_IF(kTagDriverConfig, "Dynamic Bit Clk Support = %d", hw_panel_info_.dyn_bitclk_support); |
| } |
| |
| DisplayError HWDeviceDRM::GetDisplayIdentificationData(uint8_t *out_port, uint32_t *out_data_size, |
| uint8_t *out_data) { |
| *out_port = token_.hw_port; |
| std::vector<uint8_t> &edid = connector_info_.edid; |
| |
| if (out_data == nullptr) { |
| *out_data_size = (uint32_t)(edid.size()); |
| if (*out_data_size == 0) { |
| DLOGE("EDID blob is empty, no data to return"); |
| return kErrorDriverData; |
| } |
| } else { |
| *out_data_size = std::min(*out_data_size, (uint32_t)(edid.size())); |
| memcpy(out_data, edid.data(), *out_data_size); |
| } |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::GetHWDisplayPortAndMode() { |
| hw_panel_info_.port = kPortDefault; |
| hw_panel_info_.mode = |
| (connector_info_.panel_mode == sde_drm::DRMPanelMode::VIDEO) ? kModeVideo : kModeCommand; |
| |
| if (default_mode_) { |
| return; |
| } |
| |
| switch (connector_info_.type) { |
| case DRM_MODE_CONNECTOR_DSI: |
| hw_panel_info_.port = kPortDSI; |
| interface_str_ = "DSI"; |
| break; |
| case DRM_MODE_CONNECTOR_LVDS: |
| hw_panel_info_.port = kPortLVDS; |
| interface_str_ = "LVDS"; |
| break; |
| case DRM_MODE_CONNECTOR_eDP: |
| hw_panel_info_.port = kPortEDP; |
| interface_str_ = "EDP"; |
| break; |
| case DRM_MODE_CONNECTOR_TV: |
| case DRM_MODE_CONNECTOR_HDMIA: |
| case DRM_MODE_CONNECTOR_HDMIB: |
| hw_panel_info_.port = kPortDTV; |
| interface_str_ = "HDMI"; |
| break; |
| case DRM_MODE_CONNECTOR_VIRTUAL: |
| hw_panel_info_.port = kPortWriteBack; |
| interface_str_ = "Virtual"; |
| break; |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| hw_panel_info_.port = kPortDP; |
| interface_str_ = "DisplayPort"; |
| break; |
| } |
| |
| return; |
| } |
| |
| DisplayError HWDeviceDRM::GetActiveConfig(uint32_t *active_config) { |
| *active_config = current_mode_index_; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetNumDisplayAttributes(uint32_t *count) { |
| *count = UINT32(display_attributes_.size()); |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetDisplayAttributes(uint32_t index, |
| HWDisplayAttributes *display_attributes) { |
| if (index >= display_attributes_.size()) { |
| DLOGW("Index > display_attributes_.size(). Return."); |
| return kErrorParameters; |
| } |
| *display_attributes = display_attributes_[index]; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetHWPanelInfo(HWPanelInfo *panel_info) { |
| *panel_info = hw_panel_info_; |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::SetDisplaySwitchMode(uint32_t index) { |
| if (current_mode_index_ == index && !first_cycle_) { |
| DLOGI("Mode %d already set", index); |
| return; |
| } |
| uint32_t mode_flag = 0; |
| uint32_t curr_mode_flag = 0, switch_mode_flag = 0; |
| sde_drm::DRMModeInfo to_set = connector_info_.modes[index]; |
| sde_drm::DRMModeInfo current_mode = connector_info_.modes[current_mode_index_]; |
| uint64_t target_bit_clk = connector_info_.modes[current_mode_index_].curr_bit_clk_rate; |
| uint32_t target_compression = connector_info_.modes[current_mode_index_].curr_compression_mode; |
| uint32_t switch_index = 0; |
| |
| if (to_set.cur_panel_mode & DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| mode_flag = DRM_MODE_FLAG_CMD_MODE_PANEL; |
| switch_mode_flag = DRM_MODE_FLAG_VID_MODE_PANEL; |
| } else if (to_set.cur_panel_mode & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| mode_flag = DRM_MODE_FLAG_VID_MODE_PANEL; |
| switch_mode_flag = DRM_MODE_FLAG_CMD_MODE_PANEL; |
| } |
| |
| if (current_mode.cur_panel_mode & DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| curr_mode_flag = DRM_MODE_FLAG_CMD_MODE_PANEL; |
| } else if (current_mode.cur_panel_mode & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| curr_mode_flag = DRM_MODE_FLAG_VID_MODE_PANEL; |
| } |
| |
| if (curr_mode_flag != mode_flag) { |
| panel_mode_changed_ = mode_flag; |
| } |
| |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((to_set.mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (to_set.mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay) && |
| (to_set.mode.vrefresh == connector_info_.modes[mode_index].mode.vrefresh) && |
| (mode_flag & connector_info_.modes[mode_index].cur_panel_mode)) { |
| for (uint32_t submode_idx = 0; submode_idx < |
| connector_info_.modes[mode_index].sub_modes.size(); submode_idx++) { |
| sde_drm::DRMSubModeInfo sub_mode = connector_info_.modes[mode_index].sub_modes[submode_idx]; |
| if (sub_mode.panel_compression_mode == target_compression) { |
| connector_info_.modes[mode_index].curr_submode_index = submode_idx; |
| index = mode_index; |
| to_set.curr_bit_clk_rate = GetSupportedBitClkRate(index, target_bit_clk); |
| break; |
| } |
| } |
| break; |
| } |
| } |
| |
| current_mode_index_ = index; |
| |
| switch_mode_valid_ = false; |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((to_set.mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (to_set.mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay) && |
| (to_set.mode.vrefresh == connector_info_.modes[mode_index].mode.vrefresh) && |
| (switch_mode_flag & connector_info_.modes[mode_index].cur_panel_mode)) { |
| for (uint32_t submode_idx = 0; submode_idx < |
| connector_info_.modes[mode_index].sub_modes.size(); submode_idx++) { |
| sde_drm::DRMSubModeInfo sub_mode = connector_info_.modes[mode_index].sub_modes[submode_idx]; |
| if (sub_mode.panel_compression_mode == target_compression) { |
| connector_info_.modes[mode_index].curr_submode_index = submode_idx; |
| switch_index = mode_index; |
| switch_mode_valid_ = true; |
| break; |
| } |
| } |
| break; |
| } |
| } |
| |
| if (switch_mode_valid_) { |
| if (mode_flag & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| video_mode_index_ = current_mode_index_; |
| cmd_mode_index_ = switch_index; |
| } else { |
| video_mode_index_ = switch_index; |
| cmd_mode_index_ = current_mode_index_; |
| } |
| } |
| if (current_mode.mode.hdisplay == to_set.mode.hdisplay && |
| current_mode.mode.vdisplay == to_set.mode.vdisplay) { |
| seamless_mode_switch_ = true; |
| } |
| } |
| |
| DisplayError HWDeviceDRM::SetDisplayAttributes(uint32_t index) { |
| if (index >= display_attributes_.size()) { |
| DLOGE("Invalid mode index %d mode size %d", index, UINT32(display_attributes_.size())); |
| return kErrorParameters; |
| } |
| |
| SetDisplaySwitchMode(index); |
| PopulateHWPanelInfo(); |
| UpdateMixerAttributes(); |
| |
| DLOGI_IF(kTagDriverConfig, |
| "Display %d-%d attributes[%d]: WxH: %dx%d, DPI: %fx%f, FPS: %d, " |
| "LM_SPLIT: %d, V_BACK_PORCH: %d," |
| " V_FRONT_PORCH: %d, V_PULSE_WIDTH: %d, V_TOTAL: %d, H_TOTAL: %d, CLK: %dKHZ, " |
| "TOPOLOGY: %d, PanelMode %s", display_id_, disp_type_, |
| index, display_attributes_[index].x_pixels, display_attributes_[index].y_pixels, |
| display_attributes_[index].x_dpi, display_attributes_[index].y_dpi, |
| display_attributes_[index].fps, display_attributes_[index].is_device_split, |
| display_attributes_[index].v_back_porch, display_attributes_[index].v_front_porch, |
| display_attributes_[index].v_pulse_width, display_attributes_[index].v_total, |
| display_attributes_[index].h_total, display_attributes_[index].clock_khz, |
| display_attributes_[index].topology, |
| (connector_info_.modes[index].cur_panel_mode & DRM_MODE_FLAG_VID_MODE_PANEL) ? |
| "Video" : "Command"); |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetDisplayAttributes(const HWDisplayAttributes &display_attributes) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::GetConfigIndex(char *mode, uint32_t *index) { |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::PowerOn(const HWQosData &qos_data, SyncPoints *sync_points) { |
| SetQOSData(qos_data); |
| |
| if (tui_state_ != kTUIStateNone || pending_cwb_teardown_) { |
| DLOGI("Request deferred TUI state %d pending cwb teardown %d", tui_state_, |
| pending_cwb_teardown_); |
| pending_power_state_ = kPowerStateOn; |
| return kErrorDeferred; |
| } |
| |
| int64_t release_fence_fd = -1; |
| int64_t retire_fence_fd = -1; |
| |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 1); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, DRMPowerMode::ON); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_GET_RELEASE_FENCE, token_.crtc_id, &release_fence_fd); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, token_.conn_id, &retire_fence_fd); |
| |
| // On the first boot up of the display, make the power call synchronous. This is only applicable |
| // to pluggable displays. Check HWPeripheralDRM::PowerOn. For builtin first power call defered |
| // and handled in commit(synchronous for first cycle). |
| int ret = NullCommit(first_cycle_ /* synchronous */, true /* retain_planes */); |
| if (ret) { |
| DLOGE("Failed with error: %d", ret); |
| return kErrorHardware; |
| } |
| |
| sync_points->retire_fence = Fence::Create(INT(retire_fence_fd), "retire_power_on"); |
| sync_points->release_fence = Fence::Create(INT(release_fence_fd), "release_power_on"); |
| DLOGD_IF(kTagDriverConfig, "RELEASE fence: fd: %d", INT(release_fence_fd)); |
| pending_power_state_ = kPowerStateNone; |
| |
| last_power_mode_ = DRMPowerMode::ON; |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::PowerOff(bool teardown, SyncPoints *sync_points) { |
| DTRACE_SCOPED(); |
| if (!drm_atomic_intf_) { |
| DLOGE("DRM Atomic Interface is null!"); |
| return kErrorUndefined; |
| } |
| |
| if (first_cycle_) { |
| return kErrorNone; |
| } |
| |
| if ((tui_state_ != kTUIStateNone && tui_state_ != kTUIStateEnd) || pending_cwb_teardown_) { |
| DLOGI("Request deferred TUI state %d pending cwb teardown %d", tui_state_, |
| pending_cwb_teardown_); |
| pending_power_state_ = kPowerStateOff; |
| return kErrorDeferred; |
| } |
| |
| ResetROI(); |
| ClearSolidfillStages(); |
| int64_t retire_fence_fd = -1; |
| drmModeModeInfo current_mode = connector_info_.modes[current_mode_index_].mode; |
| if (!IsSeamlessTransition()) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_MODE, token_.crtc_id, ¤t_mode); |
| } |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, DRMPowerMode::OFF); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 0); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, token_.conn_id, &retire_fence_fd); |
| |
| if (cwb_config_.cwb_disp_id == display_id_ && cwb_config_.enabled) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, cwb_config_.token.conn_id, 0); |
| DLOGI("Tearing down the CWB topology"); |
| } |
| |
| int ret = NullCommit(false /* synchronous */, false /* retain_planes */); |
| if (ret) { |
| DLOGE("Failed with error: %d, dynamic_fps=%d, seamless_mode_switch_=%d, vrefresh_=%d," |
| "panel_mode_changed_=%d bit_clk_rate_=%d", ret, hw_panel_info_.dynamic_fps, |
| seamless_mode_switch_, vrefresh_, panel_mode_changed_, bit_clk_rate_); |
| return kErrorHardware; |
| } |
| |
| if (cwb_config_.cwb_disp_id == display_id_) { // Incase display power-off in cwb active/teardown |
| // state, then reset cwb_display_id to un-block other displays from performing CWB. |
| if (cwb_config_.enabled) { |
| FlushConcurrentWriteback(); |
| } else { // for CWB Post-teardown (the frame following teardown) frame |
| cwb_config_.cwb_disp_id = -1; |
| } |
| } |
| |
| sync_points->retire_fence = Fence::Create(INT(retire_fence_fd), "retire_power_off"); |
| pending_power_state_ = kPowerStateNone; |
| |
| last_power_mode_ = DRMPowerMode::OFF; |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::Doze(const HWQosData &qos_data, SyncPoints *sync_points) { |
| DTRACE_SCOPED(); |
| |
| if (first_cycle_ || tui_state_ != kTUIStateNone || last_power_mode_ != DRMPowerMode::OFF) { |
| pending_power_state_ = kPowerStateDoze; |
| return kErrorDeferred; |
| } |
| |
| SetQOSData(qos_data); |
| |
| int64_t release_fence_fd = -1; |
| int64_t retire_fence_fd = -1; |
| |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, token_.conn_id, token_.crtc_id); |
| drmModeModeInfo current_mode = connector_info_.modes[current_mode_index_].mode; |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_MODE, token_.crtc_id, ¤t_mode); |
| |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 1); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, DRMPowerMode::DOZE); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_GET_RELEASE_FENCE, token_.crtc_id, &release_fence_fd); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, token_.conn_id, &retire_fence_fd); |
| |
| int ret = NullCommit(false /* synchronous */, true /* retain_planes */); |
| if (ret) { |
| DLOGE("Failed with error: %d", ret); |
| return kErrorHardware; |
| } |
| |
| sync_points->retire_fence = Fence::Create(INT(retire_fence_fd), "retire_doze"); |
| sync_points->release_fence = Fence::Create(release_fence_fd, "release_doze"); |
| DLOGD_IF(kTagDriverConfig, "RELEASE fence: fd: %d", INT(release_fence_fd)); |
| |
| last_power_mode_ = DRMPowerMode::DOZE; |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::DozeSuspend(const HWQosData &qos_data, SyncPoints *sync_points) { |
| DTRACE_SCOPED(); |
| |
| if (tui_state_ != kTUIStateNone && tui_state_ != kTUIStateEnd) { |
| pending_power_state_ = kPowerStateDozeSuspend; |
| return kErrorDeferred; |
| } |
| |
| SetQOSData(qos_data); |
| |
| int64_t release_fence_fd = -1; |
| int64_t retire_fence_fd = -1; |
| |
| if (first_cycle_) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, token_.conn_id, token_.crtc_id); |
| drmModeModeInfo current_mode = connector_info_.modes[current_mode_index_].mode; |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_MODE, token_.crtc_id, ¤t_mode); |
| } |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 1); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, |
| DRMPowerMode::DOZE_SUSPEND); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_GET_RELEASE_FENCE, token_.crtc_id, &release_fence_fd); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, token_.conn_id, &retire_fence_fd); |
| |
| int ret = NullCommit(false /* synchronous */, true /* retain_planes */); |
| if (ret) { |
| DLOGE("Failed with error: %d", ret); |
| return kErrorHardware; |
| } |
| |
| sync_points->retire_fence = Fence::Create(INT(retire_fence_fd), "retire_doze_suspend"); |
| sync_points->release_fence = Fence::Create(release_fence_fd, "release_doze_suspend"); |
| DLOGD_IF(kTagDriverConfig, "RELEASE fence: fd: %d", INT(release_fence_fd)); |
| |
| pending_power_state_ = kPowerStateNone; |
| |
| last_power_mode_ = DRMPowerMode::DOZE_SUSPEND; |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::SetQOSData(const HWQosData &qos_data) { |
| if (!qos_data.valid) { |
| return; |
| } |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_CORE_CLK, token_.crtc_id, qos_data.clock_hz); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_CORE_AB, token_.crtc_id, qos_data.core_ab_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_CORE_IB, token_.crtc_id, qos_data.core_ib_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_LLCC_AB, token_.crtc_id, qos_data.llcc_ab_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_LLCC_IB, token_.crtc_id, qos_data.llcc_ib_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_DRAM_AB, token_.crtc_id, qos_data.dram_ab_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_DRAM_IB, token_.crtc_id, qos_data.dram_ib_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ROT_PREFILL_BW, token_.crtc_id, |
| qos_data.rot_prefill_bw_bps); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ROT_CLK, token_.crtc_id, qos_data.rot_clock_hz); |
| } |
| |
| DisplayError HWDeviceDRM::Standby(SyncPoints *sync_points) { |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::SetupAtomic(Fence::ScopedRef &scoped_ref, HWLayersInfo *hw_layers_info, |
| bool validate, int64_t *release_fence_fd, int64_t *retire_fence_fd) { |
| if (default_mode_) { |
| return; |
| } |
| |
| DTRACE_SCOPED(); |
| uint32_t hw_layer_count = UINT32(hw_layers_info->hw_layers.size()); |
| HWQosData &qos_data = hw_layers_info->qos_data; |
| DRMSecurityLevel crtc_security_level = DRMSecurityLevel::SECURE_NON_SECURE; |
| uint32_t index = current_mode_index_; |
| sde_drm::DRMModeInfo current_mode = connector_info_.modes[index]; |
| |
| solid_fills_.clear(); |
| noise_cfg_ = {}; |
| bool resource_update = hw_layers_info->updates_mask.test(kUpdateResources); |
| bool buffer_update = hw_layers_info->updates_mask.test(kSwapBuffers); |
| bool update_config = resource_update || buffer_update || tui_state_ == kTUIStateEnd || |
| hw_layers_info->flags.geometry_changed; |
| bool update_luts = hw_layers_info->updates_mask.test(kUpdateLuts); |
| |
| if (hw_panel_info_.partial_update && update_config) { |
| if (IsFullFrameUpdate(*hw_layers_info)) { |
| ResetROI(); |
| } else { |
| const int kNumMaxROIs = 4; |
| DRMRect crtc_rects[kNumMaxROIs] = {{0, 0, mixer_attributes_.width, mixer_attributes_.height}}; |
| DRMRect conn_rects[kNumMaxROIs] = {{0, 0, display_attributes_[index].x_pixels, |
| display_attributes_[index].y_pixels}}; |
| |
| for (uint32_t i = 0; i < hw_layers_info->left_frame_roi.size(); i++) { |
| auto &roi = hw_layers_info->left_frame_roi.at(i); |
| // TODO(user): In multi PU, stitch ROIs vertically adjacent and upate plane destination |
| crtc_rects[i].left = UINT32(roi.left); |
| crtc_rects[i].right = UINT32(roi.right); |
| crtc_rects[i].top = UINT32(roi.top); |
| crtc_rects[i].bottom = UINT32(roi.bottom); |
| conn_rects[i].left = UINT32(roi.left); |
| conn_rects[i].right = UINT32(roi.right); |
| conn_rects[i].top = UINT32(roi.top); |
| conn_rects[i].bottom = UINT32(roi.bottom); |
| } |
| |
| uint32_t num_rects = std::max(1u, UINT32(hw_layers_info->left_frame_roi.size())); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ROI, token_.crtc_id, num_rects, crtc_rects); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_ROI, token_.conn_id, num_rects, conn_rects); |
| } |
| } else if (!hw_panel_info_.partial_update && |
| (current_mode.cur_panel_mode & DRM_MODE_FLAG_CMD_MODE_PANEL) && update_config) { |
| if (!IsFullFrameUpdate(*hw_layers_info)) { |
| DLOGW("Expected full frame ROI"); |
| } |
| ResetROI(); |
| } |
| |
| #ifdef TRUSTED_VM |
| if (first_cycle_) { |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::RESET_PANEL_FEATURES, 0 /* argument is not used */); |
| // On TUI start, need to clear the SSPP luts. |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::PLANES_RESET_LUT, token_.crtc_id); |
| } |
| #endif |
| |
| if (reset_planes_luts_) { |
| // Used in 1 cases: |
| // 1. Since driver doesnt clear the SSPP luts during the adb shell stop/start, clear once |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::PLANES_RESET_LUT, token_.crtc_id); |
| } |
| |
| for (uint32_t i = 0; i < hw_layer_count; i++) { |
| Layer &layer = hw_layers_info->hw_layers.at(i); |
| LayerBuffer *input_buffer = &layer.input_buffer; |
| HWPipeInfo *left_pipe = &hw_layers_info->config[i].left_pipe; |
| HWPipeInfo *right_pipe = &hw_layers_info->config[i].right_pipe; |
| HWLayerConfig &layer_config = hw_layers_info->config[i]; |
| HWRotatorSession *hw_rotator_session = &layer_config.hw_rotator_session; |
| |
| if (hw_layers_info->config[i].use_solidfill_stage) { |
| hw_layers_info->config[i].hw_solidfill_stage.solid_fill_info = layer.solid_fill_info; |
| AddSolidfillStage(hw_layers_info->config[i].hw_solidfill_stage, layer.plane_alpha); |
| continue; |
| } |
| |
| if (layer_config.hw_noise_layer_cfg.enable) { |
| SetNoiseLayerConfig(layer_config.hw_noise_layer_cfg); |
| continue; |
| } |
| |
| for (uint32_t count = 0; count < 2; count++) { |
| HWPipeInfo *pipe_info = (count == 0) ? left_pipe : right_pipe; |
| HWRotateInfo *hw_rotate_info = &hw_rotator_session->hw_rotate_info[count]; |
| |
| if (hw_rotator_session->mode == kRotatorOffline && hw_rotate_info->valid) { |
| input_buffer = &hw_rotator_session->output_buffer; |
| } |
| |
| uint32_t fb_id = registry_.GetFbId(&layer, input_buffer->handle_id); |
| |
| if (pipe_info->valid && fb_id) { |
| uint32_t pipe_id = pipe_info->pipe_id; |
| |
| if (update_config) { |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_ALPHA, pipe_id, layer.plane_alpha); |
| |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_ZORDER, pipe_id, pipe_info->z_order); |
| |
| sde_drm::DRMFp16CscType fp16_csc_type = sde_drm::DRMFp16CscType::kFP16CscTypeMax; |
| int fp16_igc_en = 0; |
| int fp16_unmult_en = 0; |
| drm_msm_fp16_gc fp16_gc_config = {.flags = 0, .mode = FP16_GC_MODE_INVALID}; |
| SelectFp16Config(layer.input_buffer, &fp16_igc_en, &fp16_unmult_en, &fp16_csc_type, |
| &fp16_gc_config, layer.blending); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FP16_CSC_CONFIG, pipe_id, fp16_csc_type); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FP16_IGC_CONFIG, pipe_id, fp16_igc_en); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FP16_GC_CONFIG, pipe_id, &fp16_gc_config); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FP16_UNMULT_CONFIG, pipe_id, fp16_unmult_en); |
| |
| // Account for PMA block activation directly at translation time to preserve layer |
| // blending definition and avoid issues when a layer structure is reused. |
| DRMBlendType blending = DRMBlendType::UNDEFINED; |
| LayerBlending layer_blend = layer.blending; |
| if (layer_blend == kBlendingPremultiplied) { |
| // If blending type is premultiplied alpha and FP16 unmult is enabled, |
| // prevent performing alpha unmultiply twice |
| if (fp16_unmult_en) { |
| layer_blend = kBlendingCoverage; |
| pipe_info->inverse_pma_info.inverse_pma = false; |
| pipe_info->inverse_pma_info.op = kReset; |
| DLOGI_IF(kTagDriverConfig, "PMA handled by FP16 UNMULT block - Pipe id: %u", pipe_id); |
| } else if (pipe_info->inverse_pma_info.inverse_pma) { |
| layer_blend = kBlendingCoverage; |
| DLOGI_IF(kTagDriverConfig, "PMA handled by Inverse PMA block - Pipe id: %u", pipe_id); |
| } |
| } |
| SetBlending(layer_blend, &blending); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_BLEND_TYPE, pipe_id, blending); |
| |
| DRMRect src = {}; |
| SetRect(pipe_info->src_roi, &src); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_SRC_RECT, pipe_id, src); |
| |
| DRMRect dst = {}; |
| SetRect(pipe_info->dst_roi, &dst); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_DST_RECT, pipe_id, dst); |
| |
| DRMRect excl = {}; |
| SetRect(pipe_info->excl_rect, &excl); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_EXCL_RECT, pipe_id, excl); |
| |
| uint32_t rot_bit_mask = 0; |
| SetRotation(layer.transform, layer_config, &rot_bit_mask); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_ROTATION, pipe_id, rot_bit_mask); |
| |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_H_DECIMATION, pipe_id, |
| pipe_info->horizontal_decimation); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_V_DECIMATION, pipe_id, |
| pipe_info->vertical_decimation); |
| |
| DRMSecureMode fb_secure_mode; |
| DRMSecurityLevel security_level; |
| SetSecureConfig(layer.input_buffer, &fb_secure_mode, &security_level); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FB_SECURE_MODE, pipe_id, fb_secure_mode); |
| if (security_level > crtc_security_level) { |
| crtc_security_level = security_level; |
| } |
| |
| uint32_t config = 0; |
| SetSrcConfig(layer.input_buffer, hw_rotator_session->mode, &config); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_SRC_CONFIG, pipe_id, config);; |
| |
| if (hw_scale_) { |
| SDEScaler scaler_output = {}; |
| hw_scale_->SetScaler(pipe_info->scale_data, &scaler_output); |
| // TODO(user): Remove qseed3 and add version check, then send appropriate scaler object |
| if (hw_resource_.has_qseed3) { |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_SCALER_CONFIG, pipe_id, |
| reinterpret_cast<uint64_t>(&scaler_output.scaler_v2)); |
| } |
| } |
| |
| DRMCscType csc_type = DRMCscType::kCscTypeMax; |
| SelectCscType(layer.input_buffer, &csc_type); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_CSC_CONFIG, pipe_id, &csc_type); |
| |
| DRMMultiRectMode multirect_mode; |
| SetMultiRectMode(pipe_info->flags, &multirect_mode); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_MULTIRECT_MODE, pipe_id, multirect_mode); |
| |
| SetSsppTonemapFeatures(pipe_info); |
| } else if (update_luts) { |
| if (force_tonemapping_) { |
| sde_drm::DRMFp16CscType fp16_csc_type = sde_drm::DRMFp16CscType::kFP16CscTypeMax; |
| int fp16_igc_en = 0; |
| int fp16_unmult_en = 0; |
| drm_msm_fp16_gc fp16_gc_config = {.flags = 0, .mode = FP16_GC_MODE_INVALID}; |
| SelectFp16Config(layer.input_buffer, &fp16_igc_en, &fp16_unmult_en, &fp16_csc_type, |
| &fp16_gc_config, layer.blending); |
| |
| // Account for PMA block activation directly at translation time to preserve layer |
| // blending definition and avoid issues when a layer structure is reused. |
| DRMBlendType blending = DRMBlendType::UNDEFINED; |
| LayerBlending layer_blend = layer.blending; |
| if (layer_blend == kBlendingPremultiplied) { |
| // If blending type is premultiplied alpha and FP16 unmult is enabled, |
| // prevent performing alpha unmultiply twice |
| if (fp16_unmult_en) { |
| layer_blend = kBlendingCoverage; |
| pipe_info->inverse_pma_info.inverse_pma = false; |
| pipe_info->inverse_pma_info.op = kReset; |
| DLOGI_IF(kTagDriverConfig, |
| "PMA handled by FP16 UNMULT block - Pipe id: %u", pipe_id); |
| } else if (pipe_info->inverse_pma_info.inverse_pma) { |
| layer_blend = kBlendingCoverage; |
| DLOGI_IF(kTagDriverConfig, |
| "PMA handled by Inverse PMA block - Pipe id: %u", pipe_id); |
| } |
| } |
| SetBlending(layer_blend, &blending); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_BLEND_TYPE, pipe_id, blending); |
| } |
| |
| SetSsppTonemapFeatures(pipe_info); |
| } |
| |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_FB_ID, pipe_id, fb_id); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_CRTC, pipe_id, token_.crtc_id); |
| |
| if (!validate && input_buffer->acquire_fence) { |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_INPUT_FENCE, pipe_id, |
| scoped_ref.Get(input_buffer->acquire_fence)); |
| } |
| } |
| } |
| } |
| |
| if (update_config) { |
| SetSolidfillStages(); |
| ApplyNoiseLayerConfig(); |
| SetQOSData(qos_data); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_SECURITY_LEVEL, token_.crtc_id, crtc_security_level); |
| } |
| |
| if (hw_layers_info->hw_avr_info.update) { |
| sde_drm::DRMQsyncMode mode = sde_drm::DRMQsyncMode::NONE; |
| if (hw_layers_info->hw_avr_info.mode == kContinuousMode) { |
| mode = sde_drm::DRMQsyncMode::CONTINUOUS; |
| } else if (hw_layers_info->hw_avr_info.mode == kOneShotMode) { |
| mode = sde_drm::DRMQsyncMode::ONESHOT; |
| } |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_QSYNC_MODE, token_.conn_id, mode); |
| } |
| |
| // dpps commit feature ops doesn't use the obj id, set it as -1 |
| drm_atomic_intf_->Perform(DRMOps::DPPS_COMMIT_FEATURE, -1, ((validate) ? 1 : 0)); |
| if (!validate) { |
| drm_atomic_intf_->Perform(DRMOps::COMMIT_PANEL_FEATURES, 0 /* argument is not used */); |
| } |
| |
| if (reset_output_fence_offset_ && !validate) { |
| // Change back the fence_offset |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_OUTPUT_FENCE_OFFSET, token_.crtc_id, 0); |
| reset_output_fence_offset_ = false; |
| } |
| |
| // Set panel mode |
| if (panel_mode_changed_ & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| if (!validate) { |
| // Switch to video mode, corresponding change the fence_offset |
| DLOGI("set property: switch to video mode"); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_OUTPUT_FENCE_OFFSET, token_.crtc_id, 1); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_PANEL_MODE, token_.conn_id, |
| panel_mode_changed_); |
| } |
| ResetROI(); |
| } |
| |
| if (panel_mode_changed_ & DRM_MODE_FLAG_CMD_MODE_PANEL && !validate) { |
| // Switch to command mode |
| DLOGI("set property: switch to command mode"); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_PANEL_MODE, token_.conn_id, |
| panel_mode_changed_); |
| } |
| |
| if (panel_compression_changed_ && !validate) { |
| DLOGI("set property: change the compression mode"); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_DSC_MODE, token_.conn_id, |
| panel_compression_changed_); |
| } |
| |
| if (!validate && release_fence_fd && retire_fence_fd) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_GET_RELEASE_FENCE, token_.crtc_id, release_fence_fd); |
| // Set retire fence offset. |
| uint32_t offset = hw_layers_info->retire_fence_offset; |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_RETIRE_FENCE_OFFSET, token_.conn_id, offset); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, token_.conn_id, retire_fence_fd); |
| } |
| |
| DLOGI_IF(kTagDriverConfig, "%s::%s System Clock=%d Hz, Core: AB=%f KBps, IB=%f Bps, " \ |
| "LLCC: AB=%f Bps, IB=%f Bps, DRAM AB=%f Bps, IB=%f Bps, "\ |
| "Rot: Bw=%f Bps, Clock=%d Hz", validate ? "Validate" : "Commit", device_name_, |
| qos_data.clock_hz, qos_data.core_ab_bps / 1000.f, qos_data.core_ib_bps / 1000.f, |
| qos_data.llcc_ab_bps / 1000.f, qos_data.llcc_ib_bps / 1000.f, |
| qos_data.dram_ab_bps / 1000.f, qos_data.dram_ib_bps / 1000.f, |
| qos_data.rot_prefill_bw_bps / 1000.f, qos_data.rot_clock_hz); |
| |
| // Set refresh rate |
| if (vrefresh_) { |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((current_mode.mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (current_mode.mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay) && |
| (current_mode.cur_panel_mode == connector_info_.modes[mode_index].cur_panel_mode) && |
| (vrefresh_ == connector_info_.modes[mode_index].mode.vrefresh)) { |
| current_mode = connector_info_.modes[mode_index]; |
| break; |
| } |
| } |
| } |
| |
| if (bit_clk_rate_) { |
| // Set the new bit clk rate |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_DYN_BIT_CLK, token_.conn_id, bit_clk_rate_); |
| } |
| |
| if (transfer_time_updated_) { |
| // Skip updating the driver if driver is the one providing new transfer time |
| if (connector_info_.modes[current_mode_index_].transfer_time_us != transfer_time_updated_) { |
| UpdateTransferTime(transfer_time_updated_); |
| } else { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_TRANSFER_TIME, token_.conn_id, |
| transfer_time_updated_); |
| } |
| } |
| |
| if (first_cycle_) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_TOPOLOGY_CONTROL, token_.conn_id, |
| topology_control_); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 1); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, token_.conn_id, token_.crtc_id); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, DRMPowerMode::ON); |
| #ifdef TRUSTED_VM |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::CRTC_SET_VM_REQ_STATE, token_.crtc_id, |
| sde_drm::DRMVMRequestState::ACQUIRE); |
| #endif |
| last_power_mode_ = DRMPowerMode::ON; |
| } else if (pending_power_state_ != kPowerStateNone && !validate) { |
| DRMPowerMode power_mode; |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ACTIVE, token_.crtc_id, 1); |
| if (GetDRMPowerMode(pending_power_state_, &power_mode) == kErrorNone) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POWER_MODE, token_.conn_id, power_mode); |
| last_power_mode_ = power_mode; |
| } |
| } |
| |
| // Set CRTC mode, only if display config changes |
| if (first_cycle_ || vrefresh_ || update_mode_) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_MODE, token_.crtc_id, ¤t_mode.mode); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_DSC_MODE, token_.conn_id, |
| current_mode.curr_compression_mode); |
| } |
| |
| if (!validate && (hw_layers_info->set_idle_time_ms >= 0)) { |
| DLOGI_IF(kTagDriverConfig, "Setting idle timeout to = %d ms", |
| hw_layers_info->set_idle_time_ms); |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_IDLE_TIMEOUT, token_.crtc_id, |
| hw_layers_info->set_idle_time_ms); |
| } |
| |
| if (hw_panel_info_.mode == kModeCommand) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_AUTOREFRESH, token_.conn_id, autorefresh_); |
| } |
| } |
| |
| void HWDeviceDRM::SetNoiseLayerConfig(const NoiseLayerConfig &noise_config) { |
| noise_cfg_.enable = noise_config.enable; |
| noise_cfg_.flags = noise_config.flags; |
| noise_cfg_.zpos_noise = noise_config.zpos_noise; |
| noise_cfg_.zpos_attn = noise_config.zpos_attn; |
| noise_cfg_.attn_factor = noise_config.attenuation_factor; |
| noise_cfg_.noise_strength = noise_config.noise_strength; |
| noise_cfg_.alpha_noise = noise_config.alpha_noise; |
| noise_cfg_.temporal_en = noise_config.temporal_en; |
| DLOGV_IF(kTagDriverConfig, "Display %d-%d z_noise = %d z_attn = %d attn_f = %d" |
| " noise_str = %d alpha noise = %d temporal_en = %d", display_id_, disp_type_, |
| noise_cfg_.zpos_noise, noise_cfg_.zpos_attn, noise_cfg_.attn_factor, |
| noise_cfg_.noise_strength, noise_cfg_.alpha_noise, noise_cfg_.temporal_en); |
| } |
| |
| void HWDeviceDRM::ApplyNoiseLayerConfig() { |
| if (hw_resource_.has_noise_layer) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_NOISELAYER_CONFIG, token_.crtc_id, |
| reinterpret_cast<uint64_t>(&noise_cfg_)); |
| } |
| } |
| |
| void HWDeviceDRM::ClearNoiseLayerConfig() { |
| noise_cfg_ = {}; |
| ApplyNoiseLayerConfig(); |
| } |
| |
| void HWDeviceDRM::AddSolidfillStage(const HWSolidfillStage &sf, uint32_t plane_alpha) { |
| sde_drm::DRMSolidfillStage solidfill; |
| solidfill.bounding_rect.left = UINT32(sf.roi.left); |
| solidfill.bounding_rect.top = UINT32(sf.roi.top); |
| solidfill.bounding_rect.right = UINT32(sf.roi.right); |
| solidfill.bounding_rect.bottom = UINT32(sf.roi.bottom); |
| solidfill.is_exclusion_rect = sf.is_exclusion_rect; |
| solidfill.plane_alpha = plane_alpha; |
| solidfill.z_order = sf.z_order; |
| if (!sf.solid_fill_info.bit_depth) { |
| solidfill.color_bit_depth = 8; |
| solidfill.alpha = (0xff000000 & sf.color) >> 24; |
| solidfill.red = (0xff0000 & sf.color) >> 16; |
| solidfill.green = (0xff00 & sf.color) >> 8; |
| solidfill.blue = 0xff & sf.color; |
| } else { |
| solidfill.color_bit_depth = sf.solid_fill_info.bit_depth; |
| solidfill.alpha = sf.solid_fill_info.alpha; |
| solidfill.red = sf.solid_fill_info.red; |
| solidfill.green = sf.solid_fill_info.green; |
| solidfill.blue = sf.solid_fill_info.blue; |
| } |
| solid_fills_.push_back(solidfill); |
| DLOGI_IF(kTagDriverConfig, "Add a solidfill stage at z_order:%d argb_color:%x plane_alpha:%x", |
| solidfill.z_order, solidfill.color, solidfill.plane_alpha); |
| } |
| |
| void HWDeviceDRM::SetSolidfillStages() { |
| if (hw_resource_.num_solidfill_stages) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_SOLIDFILL_STAGES, token_.crtc_id, |
| reinterpret_cast<uint64_t> (&solid_fills_)); |
| } |
| } |
| |
| void HWDeviceDRM::ClearSolidfillStages() { |
| solid_fills_.clear(); |
| SetSolidfillStages(); |
| } |
| |
| DisplayError HWDeviceDRM::Validate(HWLayersInfo *hw_layers_info) { |
| DTRACE_SCOPED(); |
| |
| DisplayError err = kErrorNone; |
| registry_.Register(hw_layers_info); |
| |
| Fence::ScopedRef scoped_ref; |
| SetupAtomic(scoped_ref, hw_layers_info, true /* validate */, nullptr, nullptr); |
| |
| int ret = drm_atomic_intf_->Validate(); |
| if (ret) { |
| DLOGE("failed with error %d for %s", ret, device_name_); |
| DumpHWLayers(hw_layers_info); |
| vrefresh_ = 0; |
| panel_mode_changed_ = 0; |
| seamless_mode_switch_ = false; |
| panel_compression_changed_ = 0; |
| transfer_time_updated_ = 0; |
| err = kErrorHardware; |
| } |
| |
| return err; |
| } |
| |
| DisplayError HWDeviceDRM::Commit(HWLayersInfo *hw_layers_info) { |
| DTRACE_SCOPED(); |
| |
| DisplayError err = kErrorNone; |
| registry_.Register(hw_layers_info); |
| |
| if (default_mode_) { |
| err = DefaultCommit(hw_layers_info); |
| } else { |
| err = AtomicCommit(hw_layers_info); |
| } |
| |
| return err; |
| } |
| |
| DisplayError HWDeviceDRM::DefaultCommit(HWLayersInfo *hw_layers_info) { |
| DTRACE_SCOPED(); |
| |
| |
| for (Layer &layer : hw_layers_info->hw_layers) { |
| layer.input_buffer.release_fence = nullptr; |
| } |
| |
| DRMMaster *master = nullptr; |
| int ret = DRMMaster::GetInstance(&master); |
| if (ret < 0) { |
| DLOGE("Failed to acquire DRMMaster instance"); |
| return kErrorResources; |
| } |
| |
| DRMResMgr *res_mgr = nullptr; |
| ret = DRMResMgr::GetInstance(&res_mgr); |
| if (ret < 0) { |
| DLOGE("Failed to acquire DRMResMgr instance"); |
| return kErrorResources; |
| } |
| |
| int dev_fd = -1; |
| master->GetHandle(&dev_fd); |
| |
| uint32_t connector_id = 0; |
| res_mgr->GetConnectorId(&connector_id); |
| |
| uint32_t crtc_id = 0; |
| res_mgr->GetCrtcId(&crtc_id); |
| |
| drmModeModeInfo mode; |
| res_mgr->GetMode(&mode); |
| |
| uint64_t handle_id = hw_layers_info->hw_layers.at(0).input_buffer.handle_id; |
| uint32_t fb_id = registry_.GetFbId(&hw_layers_info->hw_layers.at(0), handle_id); |
| ret = drmModeSetCrtc(dev_fd, crtc_id, fb_id, 0 /* x */, 0 /* y */, &connector_id, |
| 1 /* num_connectors */, &mode); |
| if (ret < 0) { |
| DLOGE("drmModeSetCrtc failed dev fd %d, fb_id %d, crtc id %d, connector id %d, %s", dev_fd, |
| fb_id, crtc_id, connector_id, strerror(errno)); |
| return kErrorHardware; |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::AtomicCommit(HWLayersInfo *hw_layers_info) { |
| DTRACE_SCOPED(); |
| |
| int64_t release_fence_fd = -1; |
| int64_t retire_fence_fd = -1; |
| |
| // scoped fence fds will be automatically closed when function scope ends, |
| // atomic commit will have these fds already set on kernel by then. |
| Fence::ScopedRef scoped_ref; |
| SetupAtomic(scoped_ref, hw_layers_info, false /* validate */, |
| &release_fence_fd, &retire_fence_fd); |
| |
| bool sync_commit = synchronous_commit_ || first_cycle_; |
| |
| if (hw_layers_info->elapse_timestamp > 0) { |
| struct timespec t = {0, 0}; |
| clock_gettime(CLOCK_MONOTONIC, &t); |
| uint64_t current_time = (UINT64(t.tv_sec) * 1000000000LL + t.tv_nsec); |
| if (current_time < hw_layers_info->elapse_timestamp) { |
| usleep(UINT32((hw_layers_info->elapse_timestamp - current_time) / 1000)); |
| } |
| } |
| |
| int ret = drm_atomic_intf_->Commit(sync_commit, false /* retain_planes*/); |
| shared_ptr<Fence> release_fence = Fence::Create(INT(release_fence_fd), "release"); |
| shared_ptr<Fence> retire_fence = Fence::Create(INT(retire_fence_fd), "retire"); |
| if (ret) { |
| DLOGE("%s failed with error %d crtc %d", __FUNCTION__, ret, token_.crtc_id); |
| DumpHWLayers(hw_layers_info); |
| vrefresh_ = 0; |
| panel_mode_changed_ = 0; |
| seamless_mode_switch_ = false; |
| panel_compression_changed_ = 0; |
| transfer_time_updated_ = 0; |
| return kErrorHardware; |
| } |
| |
| DLOGD_IF(kTagDriverConfig, "RELEASE fence: fd: %s", Fence::GetStr(release_fence).c_str()); |
| DLOGD_IF(kTagDriverConfig, "RETIRE fence: fd: %s", Fence::GetStr(retire_fence).c_str()); |
| |
| hw_layers_info->retire_fence = retire_fence; |
| |
| for (uint32_t i = 0; i < hw_layers_info->hw_layers.size(); i++) { |
| Layer &layer = hw_layers_info->hw_layers.at(i); |
| HWRotatorSession *hw_rotator_session = &hw_layers_info->config[i].hw_rotator_session; |
| if (hw_rotator_session->mode == kRotatorOffline) { |
| hw_rotator_session->output_buffer.release_fence = release_fence; |
| } else { |
| layer.input_buffer.release_fence = release_fence; |
| } |
| } |
| |
| hw_layers_info->sync_handle = release_fence; |
| |
| if (vrefresh_) { |
| // Update current mode index if refresh rate is changed |
| drmModeModeInfo current_mode = connector_info_.modes[current_mode_index_].mode; |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((current_mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (current_mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay) && |
| (vrefresh_ == connector_info_.modes[mode_index].mode.vrefresh)) { |
| SetDisplaySwitchMode(mode_index); |
| break; |
| } |
| } |
| vrefresh_ = 0; |
| } |
| |
| |
| if (bit_clk_rate_) { |
| // Update current mode index if bit clk rate is changed. |
| connector_info_.modes[current_mode_index_].curr_bit_clk_rate = bit_clk_rate_; |
| |
| bit_clk_rate_ = 0; |
| } |
| |
| if (transfer_time_updated_) { |
| transfer_time_updated_ = 0; |
| synchronous_commit_ = false; |
| } |
| |
| if (panel_mode_changed_ & DRM_MODE_FLAG_CMD_MODE_PANEL) { |
| panel_mode_changed_ = 0; |
| synchronous_commit_ = false; |
| } else if (panel_mode_changed_ & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| panel_mode_changed_ = 0; |
| synchronous_commit_ = false; |
| reset_output_fence_offset_ = true; |
| } |
| |
| panel_compression_changed_ = 0; |
| reset_planes_luts_ = false; |
| first_cycle_ = false; |
| update_mode_ = false; |
| hw_layers_info->updates_mask = 0; |
| pending_power_state_ = kPowerStateNone; |
| pending_cwb_teardown_ = false; |
| // Inherently a real commit ensures null commit properties have happened, so update the member |
| first_null_cycle_ = false; |
| seamless_mode_switch_ = false; |
| |
| SetTUIState(); |
| |
| #ifdef TRUSTED_VM |
| drm_atomic_intf_->Perform(sde_drm::DRMOps::CRTC_SET_VM_REQ_STATE, token_.crtc_id, |
| sde_drm::DRMVMRequestState::NONE); |
| #endif |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::Flush(HWLayersInfo *hw_layers_info) { |
| ClearSolidfillStages(); |
| ClearNoiseLayerConfig(); |
| ResetROI(); |
| bool sync_commit = (tui_state_ == kTUIStateStart || tui_state_ == kTUIStateEnd || |
| secure_display_active_); |
| |
| // TODO(user): Handle via flush call |
| #ifdef TRUSTED_VM |
| sync_commit = true; |
| #endif |
| |
| // dpps commit feature ops doesn't use the obj id, set it as -1 |
| drm_atomic_intf_->Perform(DRMOps::DPPS_COMMIT_FEATURE, -1); |
| |
| if (cwb_config_.cwb_disp_id == display_id_ && cwb_config_.enabled) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, cwb_config_.token.conn_id, 0); |
| DLOGI("Tearing down the CWB topology"); |
| } |
| |
| int ret = NullCommit(sync_commit /* synchronous */, false /* retain_planes*/); |
| if (ret) { |
| DLOGE("failed with error %d", ret); |
| return kErrorHardware; |
| } |
| |
| if (cwb_config_.cwb_disp_id == display_id_) { |
| if (cwb_config_.enabled) { |
| FlushConcurrentWriteback(); |
| } else { |
| cwb_config_.cwb_disp_id = -1; |
| } |
| } |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::SetBlending(const LayerBlending &source, DRMBlendType *target) { |
| switch (source) { |
| case kBlendingPremultiplied: |
| *target = DRMBlendType::PREMULTIPLIED; |
| break; |
| case kBlendingOpaque: |
| *target = DRMBlendType::OPAQUE; |
| break; |
| case kBlendingCoverage: |
| *target = DRMBlendType::COVERAGE; |
| break; |
| case kBlendingSkip: |
| *target = DRMBlendType::SKIP_BLENDING; |
| break; |
| default: |
| *target = DRMBlendType::UNDEFINED; |
| } |
| } |
| |
| void HWDeviceDRM::SetSrcConfig(const LayerBuffer &input_buffer, const HWRotatorMode &mode, |
| uint32_t *config) { |
| // In offline rotation case, rotator will handle deinterlacing. |
| if (mode == kRotatorInline) { |
| if (input_buffer.flags.interlace) { |
| *config |= (0x01 << UINT32(DRMSrcConfig::DEINTERLACE)); |
| } |
| } |
| } |
| |
| void HWDeviceDRM::SelectCscType(const LayerBuffer &input_buffer, DRMCscType *type) { |
| if (type == NULL) { |
| return; |
| } |
| |
| *type = DRMCscType::kCscTypeMax; |
| if (input_buffer.format < kFormatYCbCr420Planar) { |
| return; |
| } |
| |
| // Override YUV to RGB CSC in DV P5 cases. If extended content metadata is used |
| // for other metadata types we will run into issues. |
| bool extended_md_present = input_buffer.extended_content_metadata != nullptr && |
| input_buffer.extended_content_metadata->size; |
| if (extended_md_present && (input_buffer.color_metadata.transfer == Transfer_SMPTE_170M |
| || input_buffer.color_metadata.transfer == Transfer_sRGB)) { |
| *type = DRMCscType::kCscYuv2RgbDolbyVisionP5; |
| return; |
| } |
| |
| switch (input_buffer.color_metadata.colorPrimaries) { |
| case ColorPrimaries_BT601_6_525: |
| case ColorPrimaries_BT601_6_625: |
| *type = ((input_buffer.color_metadata.range == Range_Full) ? |
| DRMCscType::kCscYuv2Rgb601FR : DRMCscType::kCscYuv2Rgb601L); |
| break; |
| case ColorPrimaries_BT709_5: |
| *type = ((input_buffer.color_metadata.range == Range_Full) ? |
| DRMCscType::kCscYuv2Rgb709FR : DRMCscType::kCscYuv2Rgb709L); |
| break; |
| case ColorPrimaries_BT2020: |
| *type = ((input_buffer.color_metadata.range == Range_Full) ? |
| DRMCscType::kCscYuv2Rgb2020FR : DRMCscType::kCscYuv2Rgb2020L); |
| break; |
| case ColorPrimaries_DCIP3: |
| *type = ((input_buffer.color_metadata.range == Range_Full) ? |
| DRMCscType::kCscYuv2RgbDCIP3FR : DRMCscType::kCscTypeMax); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void HWDeviceDRM::SelectFp16Config(const LayerBuffer &input_buffer, int *igc_en, int *unmult_en, |
| sde_drm::DRMFp16CscType *csc_type, drm_msm_fp16_gc *gc, |
| LayerBlending blend) { |
| if (csc_type == NULL || gc == NULL || igc_en == NULL || unmult_en == NULL) { |
| // FP16 block will be disabled by default for invalid params |
| DLOGE("Invalid params"); |
| return; |
| } |
| |
| *csc_type = sde_drm::DRMFp16CscType::kFP16CscTypeMax; |
| *unmult_en = 0; |
| *igc_en = 0; |
| gc->flags = 0; |
| gc->mode = FP16_GC_MODE_INVALID; |
| |
| if (!Is16BitFormat(input_buffer.format)) { |
| return; |
| } |
| |
| // FP16 block should only be configured for the expected use cases. |
| // All other cases will be disabled by default. |
| if ((input_buffer.color_metadata.colorPrimaries == ColorPrimaries_BT709_5) && |
| (input_buffer.color_metadata.range == Range_Extended)) { |
| *csc_type = sde_drm::DRMFp16CscType::kFP16CscSrgb2Bt2020; |
| gc->mode = FP16_GC_MODE_PQ; |
| if (input_buffer.color_metadata.transfer == Transfer_sRGB) { |
| *igc_en = 1; |
| } else if (input_buffer.color_metadata.transfer == Transfer_Linear) { |
| *igc_en = 0; |
| } |
| |
| if (blend == kBlendingPremultiplied) { |
| *unmult_en = 1; |
| } |
| } |
| } |
| |
| void HWDeviceDRM::SetRect(const LayerRect &source, DRMRect *target) { |
| target->left = UINT32(source.left); |
| target->top = UINT32(source.top); |
| target->right = UINT32(source.right); |
| target->bottom = UINT32(source.bottom); |
| } |
| |
| void HWDeviceDRM::SetRotation(LayerTransform transform, const HWLayerConfig &layer_config, |
| uint32_t* rot_bit_mask) { |
| HWRotatorMode mode = layer_config.hw_rotator_session.mode; |
| // In offline rotation case, rotator will handle flips set via offline rotator interface. |
| if (mode == kRotatorOffline) { |
| *rot_bit_mask = 0; |
| return; |
| } |
| |
| // In no rotation case or inline rotation case, plane will handle flips |
| // In DRM framework rotation is applied in counter-clockwise direction. |
| if (layer_config.use_inline_rot && transform.rotation == 90) { |
| // a) rotate 90 clockwise = rotate 270 counter-clockwise in DRM |
| // rotate 270 is translated as hflip + vflip + rotate90 |
| // b) rotate 270 clockwise = rotate 90 counter-clockwise in DRM |
| // c) hflip + rotate 90 clockwise = vflip + rotate 90 counter-clockwise in DRM |
| // d) vflip + rotate 90 clockwise = hflip + rotate 90 counter-clockwise in DRM |
| *rot_bit_mask = UINT32(DRMRotation::ROT_90); |
| transform.flip_horizontal = !transform.flip_horizontal; |
| transform.flip_vertical = !transform.flip_vertical; |
| } |
| |
| if (transform.flip_horizontal) { |
| *rot_bit_mask |= UINT32(DRMRotation::FLIP_H); |
| } |
| |
| if (transform.flip_vertical) { |
| *rot_bit_mask |= UINT32(DRMRotation::FLIP_V); |
| } |
| } |
| |
| bool HWDeviceDRM::EnableHotPlugDetection(int enable) { |
| return true; |
| } |
| |
| DisplayError HWDeviceDRM::SetCursorPosition(HWLayersInfo *hw_layers_info, int x, int y) { |
| DTRACE_SCOPED(); |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetPPFeaturesVersion(PPFeatureVersion *vers) { |
| struct DRMPPFeatureInfo info = {}; |
| |
| if (!hw_color_mgr_) |
| return kErrorNotSupported; |
| |
| for (uint32_t i = 0; i < kMaxNumPPFeatures; i++) { |
| std::vector<DRMPPFeatureID> drm_id = {}; |
| memset(&info, 0, sizeof(struct DRMPPFeatureInfo)); |
| hw_color_mgr_->ToDrmFeatureId(kDSPP, i, &drm_id); |
| if (drm_id.empty()) |
| continue; |
| |
| info.id = drm_id.at(0); |
| |
| drm_mgr_intf_->GetCrtcPPInfo(token_.crtc_id, &info); |
| vers->version[i] = hw_color_mgr_->GetFeatureVersion(info); |
| } |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetPPFeature(PPFeatureInfo *feature) { |
| int ret = 0; |
| DRMCrtcInfo crtc_info = {}; |
| |
| if (!hw_color_mgr_) { |
| return kErrorNotSupported; |
| } |
| |
| std::vector<DRMPPFeatureID> drm_id = {}; |
| DRMPPFeatureInfo kernel_params = {}; |
| bool crtc_feature = true; |
| |
| hw_color_mgr_->ToDrmFeatureId(kDSPP, feature->feature_id_, &drm_id); |
| if (drm_id.empty()) { |
| return kErrorNone; |
| } else if (drm_id.at(0) == DRMPPFeatureID::kFeatureDither) { |
| drm_mgr_intf_->GetCrtcInfo(token_.crtc_id, &crtc_info); |
| if (crtc_info.has_spr) |
| drm_id.at(0) = DRMPPFeatureID::kFeatureSprDither; |
| } |
| |
| kernel_params.id = drm_id.at(0); |
| drm_mgr_intf_->GetCrtcPPInfo(token_.crtc_id, &kernel_params); |
| if (kernel_params.version == std::numeric_limits<uint32_t>::max()) |
| crtc_feature = false; |
| |
| DLOGV_IF(kTagDriverConfig, "feature_id = %d", feature->feature_id_); |
| for (DRMPPFeatureID id : drm_id) { |
| if (id >= kPPFeaturesMax) { |
| DLOGE("Invalid feature id %d", id); |
| continue; |
| } |
| |
| kernel_params.id = id; |
| ret = hw_color_mgr_->GetDrmFeature(feature, &kernel_params); |
| if (!ret && crtc_feature) |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_POST_PROC, |
| token_.crtc_id, &kernel_params); |
| else if (!ret && !crtc_feature) |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POST_PROC, |
| token_.conn_id, &kernel_params); |
| |
| hw_color_mgr_->FreeDrmFeatureData(&kernel_params); |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetVSyncState(bool enable) { |
| return kErrorNotSupported; |
| } |
| |
| void HWDeviceDRM::SetIdleTimeoutMs(uint32_t timeout_ms) { |
| // TODO(user): This function can be removed after fb is deprecated |
| } |
| |
| DisplayError HWDeviceDRM::SetDisplayMode(const HWDisplayMode hw_display_mode) { |
| if (!switch_mode_valid_) { |
| return kErrorNotSupported; |
| } |
| |
| uint32_t mode_flag = 0; |
| sde_drm::DRMModeInfo current_mode = connector_info_.modes[current_mode_index_]; |
| |
| // Refresh rate change needed if new panel mode differs from current |
| if (hw_display_mode == kModeCommand) { |
| mode_flag = DRM_MODE_FLAG_CMD_MODE_PANEL; |
| if (connector_info_.modes[cmd_mode_index_].mode.vrefresh != current_mode.mode.vrefresh) { |
| vrefresh_ = connector_info_.modes[cmd_mode_index_].mode.vrefresh; |
| } |
| current_mode_index_ = cmd_mode_index_; |
| connector_info_.modes[current_mode_index_].cur_panel_mode = mode_flag; |
| DLOGI_IF(kTagDriverConfig, "switch panel mode to command"); |
| } else if (hw_display_mode == kModeVideo) { |
| mode_flag = DRM_MODE_FLAG_VID_MODE_PANEL; |
| if (connector_info_.modes[video_mode_index_].mode.vrefresh != current_mode.mode.vrefresh) { |
| vrefresh_ = connector_info_.modes[video_mode_index_].mode.vrefresh; |
| } |
| current_mode_index_ = video_mode_index_; |
| connector_info_.modes[current_mode_index_].cur_panel_mode = mode_flag; |
| DLOGI_IF(kTagDriverConfig, "switch panel mode to video"); |
| } |
| PopulateHWPanelInfo(); |
| panel_mode_changed_ = mode_flag; |
| synchronous_commit_ = true; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetRefreshRate(uint32_t refresh_rate) { |
| if (bit_clk_rate_) { |
| // bit rate update pending. |
| // Defer any refresh rate setting. |
| return kErrorNotSupported; |
| } |
| |
| // Check if requested refresh rate is valid |
| sde_drm::DRMModeInfo current_mode = connector_info_.modes[current_mode_index_]; |
| for (uint32_t mode_index = 0; mode_index < connector_info_.modes.size(); mode_index++) { |
| if ((current_mode.mode.vdisplay == connector_info_.modes[mode_index].mode.vdisplay) && |
| (current_mode.mode.hdisplay == connector_info_.modes[mode_index].mode.hdisplay) && |
| (current_mode.cur_panel_mode == connector_info_.modes[mode_index].cur_panel_mode) && |
| (refresh_rate == connector_info_.modes[mode_index].mode.vrefresh)) { |
| for (uint32_t submode_idx = 0; submode_idx < |
| connector_info_.modes[mode_index].sub_modes.size(); submode_idx++) { |
| sde_drm::DRMSubModeInfo sub_mode = connector_info_.modes[mode_index].sub_modes[submode_idx]; |
| if (sub_mode.panel_compression_mode == current_mode.curr_compression_mode) { |
| connector_info_.modes[mode_index].curr_submode_index = submode_idx; |
| vrefresh_ = refresh_rate; |
| DLOGV_IF(kTagDriverConfig, "Set refresh rate to %d", refresh_rate); |
| return kErrorNone; |
| } |
| } |
| } |
| } |
| return kErrorNotSupported; |
| } |
| |
| |
| |
| DisplayError HWDeviceDRM::GetHWScanInfo(HWScanInfo *scan_info) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::GetVideoFormat(uint32_t config_index, uint32_t *video_format) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::GetMaxCEAFormat(uint32_t *max_cea_format) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::OnMinHdcpEncryptionLevelChange(uint32_t min_enc_level) { |
| DisplayError error = kErrorNone; |
| int fd = -1; |
| char data[kMaxStringLength] = {'\0'}; |
| |
| snprintf(data, sizeof(data), "/sys/devices/virtual/hdcp/msm_hdcp/min_level_change"); |
| |
| fd = Sys::open_(data, O_WRONLY); |
| if (fd < 0) { |
| DLOGE("File '%s' could not be opened. errno = %d, desc = %s", data, errno, strerror(errno)); |
| return kErrorHardware; |
| } |
| |
| snprintf(data, sizeof(data), "%d", min_enc_level); |
| |
| ssize_t err = Sys::pwrite_(fd, data, strlen(data), 0); |
| if (err <= 0) { |
| DLOGE("Write failed, Error = %s", strerror(errno)); |
| error = kErrorHardware; |
| } |
| |
| Sys::close_(fd); |
| |
| return error; |
| } |
| |
| DisplayError HWDeviceDRM::SetScaleLutConfig(HWScaleLutInfo *lut_info) { |
| sde_drm::DRMScalerLUTInfo drm_lut_info = {}; |
| drm_lut_info.cir_lut = lut_info->cir_lut; |
| drm_lut_info.dir_lut = lut_info->dir_lut; |
| drm_lut_info.sep_lut = lut_info->sep_lut; |
| drm_lut_info.cir_lut_size = lut_info->cir_lut_size; |
| drm_lut_info.dir_lut_size = lut_info->dir_lut_size; |
| drm_lut_info.sep_lut_size = lut_info->sep_lut_size; |
| drm_mgr_intf_->SetScalerLUT(drm_lut_info); |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::UnsetScaleLutConfig() { |
| drm_mgr_intf_->UnsetScalerLUT(); |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetMixerAttributes(const HWMixerAttributes &mixer_attributes) { |
| if (IsResolutionSwitchEnabled()) { |
| return kErrorNotSupported; |
| } |
| |
| if (!dest_scaler_blocks_used_) { |
| return kErrorNotSupported; |
| } |
| |
| uint32_t index = current_mode_index_; |
| |
| if (mixer_attributes.width > display_attributes_[index].x_pixels || |
| mixer_attributes.height > display_attributes_[index].y_pixels) { |
| DLOGW("Input resolution exceeds display resolution! input: res %dx%d display: res %dx%d", |
| mixer_attributes.width, mixer_attributes.height, display_attributes_[index].x_pixels, |
| display_attributes_[index].y_pixels); |
| return kErrorNotSupported; |
| } |
| |
| uint32_t topology_num_split = display_attributes_[index].topology_num_split; |
| if (mixer_attributes.width % topology_num_split != 0) { |
| DLOGW("Uneven LM split: topology:%d supported_split:%d mixer_width:%d", |
| display_attributes_[index].topology, topology_num_split, mixer_attributes.width); |
| return kErrorNotSupported; |
| } |
| |
| uint32_t max_input_width = hw_resource_.hw_dest_scalar_info.max_input_width; |
| uint32_t split_max_input_width = max_input_width - DEST_SCALAR_OVERFETCH_SIZE; |
| uint32_t lm_split_width = mixer_attributes.width / topology_num_split; |
| if (topology_num_split > 1 && lm_split_width > split_max_input_width) { |
| DLOGW("Input width exceeds width limit in split LM mode. input_width %d width_limit %d", |
| lm_split_width, split_max_input_width); |
| return kErrorNotSupported; |
| } |
| |
| if (mixer_attributes.width > max_input_width * topology_num_split) { |
| DLOGW("Input width exceeds width limit! input_width %d width_limit %d", mixer_attributes.width, |
| max_input_width * topology_num_split); |
| return kErrorNotSupported; |
| } |
| |
| float mixer_aspect_ratio = FLOAT(mixer_attributes.width) / FLOAT(mixer_attributes.height); |
| float display_aspect_ratio = |
| FLOAT(display_attributes_[index].x_pixels) / FLOAT(display_attributes_[index].y_pixels); |
| |
| float display_to_mixer_aspect_ratio = std::max(display_aspect_ratio, mixer_aspect_ratio) / |
| std::min(display_aspect_ratio, mixer_aspect_ratio); |
| if (display_to_mixer_aspect_ratio > aspect_ratio_threshold_) { |
| DLOGW("Aspect ratio mismatch! input: res %dx%d display: res %dx%d", mixer_attributes.width, |
| mixer_attributes.height, display_attributes_[index].x_pixels, |
| display_attributes_[index].y_pixels); |
| return kErrorNotSupported; |
| } |
| |
| float scale_x = FLOAT(display_attributes_[index].x_pixels) / FLOAT(mixer_attributes.width); |
| float scale_y = FLOAT(display_attributes_[index].y_pixels) / FLOAT(mixer_attributes.height); |
| float max_scale_up = hw_resource_.hw_dest_scalar_info.max_scale_up; |
| if (scale_x > max_scale_up || scale_y > max_scale_up) { |
| DLOGW( |
| "Up scaling ratio exceeds for destination scalar upscale limit scale_x %f scale_y %f " |
| "max_scale_up %f", |
| scale_x, scale_y, max_scale_up); |
| return kErrorNotSupported; |
| } |
| |
| float mixer_split_ratio = FLOAT(mixer_attributes_.split_left) / FLOAT(mixer_attributes_.width); |
| |
| mixer_attributes_ = mixer_attributes; |
| mixer_attributes_.split_left = mixer_attributes_.width; |
| mixer_attributes_.split_type = kNoSplit; |
| mixer_attributes_.dest_scaler_blocks_used = dest_scaler_blocks_used_; // No change. |
| if (display_attributes_[index].is_device_split) { |
| mixer_attributes_.split_left = UINT32(FLOAT(mixer_attributes.width) * mixer_split_ratio); |
| mixer_attributes_.split_type = kDualSplit; |
| if (display_attributes_[index].topology == kQuadLMMerge || |
| display_attributes_[index].topology == kQuadLMDSCMerge || |
| display_attributes_[index].topology == kQuadLMMergeDSC || |
| display_attributes_[index].topology == kQuadLMDSC4HSMerge) { |
| mixer_attributes_.split_type = kQuadSplit; |
| } |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetMixerAttributes(HWMixerAttributes *mixer_attributes) { |
| if (!mixer_attributes) { |
| DLOGW("mixer_attributes invalid. Return."); |
| return kErrorParameters; |
| } |
| |
| *mixer_attributes = mixer_attributes_; |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::DumpDebugData() { |
| string out_dir_path = "/data/vendor/display/hw_recovery/"; |
| string devcd_dir_path = "/sys/class/devcoredump/"; |
| string device_str = device_name_; |
| string devcd_path; |
| string driver_name; |
| |
| // Attempt to make hw_recovery dir, it may exist |
| if (mkdir(out_dir_path.c_str(), 0777) != 0 && errno != EEXIST) { |
| DLOGW("Failed to create %s directory errno = %d, desc = %s", out_dir_path.c_str(), errno, |
| strerror(errno)); |
| return kErrorPermission; |
| } |
| // If it does exist, ensure permissions are fine |
| if (errno == EEXIST && chmod(out_dir_path.c_str(), 0777) != 0) { |
| DLOGW("Failed to change permissions on %s directory", out_dir_path.c_str()); |
| return kErrorPermission; |
| } |
| |
| string filename = out_dir_path + device_str + "_HWR_" + to_string(debug_dump_count_); |
| ofstream dst; |
| debug_dump_count_++; |
| fstream src; |
| char buffer[3*1024 + 1]; |
| auto dir = opendir(devcd_dir_path.c_str()); |
| |
| if (dir == nullptr) { |
| DLOGW("Failed to access %s directory", devcd_dir_path.c_str()); |
| return kErrorPermission; |
| } |
| |
| // Find the devcd node corresponding to display driver |
| while (auto i = readdir(dir)) { |
| if (string(i->d_name).find("devcd") != string::npos) { |
| devcd_path = devcd_dir_path + i->d_name + "/failing_device/uevent"; |
| src.open(devcd_path, fstream::in); |
| if (src.fail()) { |
| continue; |
| } else { |
| src >> driver_name; |
| src.close(); |
| if (driver_name == "DRIVER=msm_drm") { |
| closedir(dir); |
| devcd_path = devcd_dir_path + i->d_name + "/data"; |
| src.rdbuf()->pubsetbuf(buffer, sizeof(buffer)); |
| src.open(devcd_path, fstream::in); |
| dst.open(filename); |
| dst << "---- Event Logs ----" << std::endl; |
| dst << src.rdbuf() << std::endl; |
| if (src.fail()) { |
| DLOGW("Unable to read devcoredump node"); |
| return kErrorUndefined; |
| } |
| src.close(); |
| dst.close(); |
| DLOGI("Wrote hw_recovery file %s", filename.c_str()); |
| |
| return kErrorNone; |
| } |
| } |
| } |
| } |
| closedir(dir); |
| DLOGW("Unable to find devcoredump data node"); |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::GetDRMDisplayToken(sde_drm::DRMDisplayToken *token) const { |
| *token = token_; |
| } |
| |
| void HWDeviceDRM::UpdateMixerAttributes() { |
| uint32_t index = current_mode_index_; |
| |
| mixer_attributes_.width = display_attributes_[index].x_pixels; |
| mixer_attributes_.height = display_attributes_[index].y_pixels; |
| mixer_attributes_.split_left = display_attributes_[index].is_device_split |
| ? hw_panel_info_.split_info.left_split |
| : mixer_attributes_.width; |
| mixer_attributes_.split_type = kNoSplit; |
| if (display_attributes_[index].is_device_split) { |
| mixer_attributes_.split_type = kDualSplit; |
| if (display_attributes_[index].topology == kQuadLMMerge || |
| display_attributes_[index].topology == kQuadLMDSCMerge || |
| display_attributes_[index].topology == kQuadLMMergeDSC || |
| display_attributes_[index].topology == kQuadLMDSC4HSMerge) { |
| mixer_attributes_.split_type = kQuadSplit; |
| } |
| } |
| |
| DLOGI("Mixer WxH %dx%d-%d for %s", mixer_attributes_.width, mixer_attributes_.height, |
| mixer_attributes_.split_type, device_name_); |
| update_mode_ = true; |
| } |
| |
| void HWDeviceDRM::SetSecureConfig(const LayerBuffer &input_buffer, DRMSecureMode *fb_secure_mode, |
| DRMSecurityLevel *security_level) { |
| *fb_secure_mode = DRMSecureMode::NON_SECURE; |
| *security_level = DRMSecurityLevel::SECURE_NON_SECURE; |
| |
| if (input_buffer.flags.secure) { |
| if (input_buffer.flags.secure_camera) { |
| // IOMMU configuration for this framebuffer mode is secure domain & requires |
| // only stage II translation, when this buffer is accessed by Display H/W. |
| // Secure and non-secure planes can be attached to this CRTC. |
| *fb_secure_mode = DRMSecureMode::SECURE_DIR_TRANSLATION; |
| } else if (input_buffer.flags.secure_display) { |
| // IOMMU configuration for this framebuffer mode is secure domain & requires |
| // only stage II translation, when this buffer is accessed by Display H/W. |
| // Only secure planes can be attached to this CRTC. |
| *fb_secure_mode = DRMSecureMode::SECURE_DIR_TRANSLATION; |
| *security_level = DRMSecurityLevel::SECURE_ONLY; |
| } else { |
| // IOMMU configuration for this framebuffer mode is secure domain & requires both |
| // stage I and stage II translations, when this buffer is accessed by Display H/W. |
| // Secure and non-secure planes can be attached to this CRTC. |
| *fb_secure_mode = DRMSecureMode::SECURE; |
| } |
| } |
| } |
| |
| void HWDeviceDRM::SetTopology(sde_drm::DRMTopology drm_topology, HWTopology *hw_topology) { |
| switch (drm_topology) { |
| case DRMTopology::SINGLE_LM: *hw_topology = kSingleLM; break; |
| case DRMTopology::SINGLE_LM_DSC: *hw_topology = kSingleLMDSC; break; |
| case DRMTopology::DUAL_LM: *hw_topology = kDualLM; break; |
| case DRMTopology::DUAL_LM_DSC: *hw_topology = kDualLMDSC; break; |
| case DRMTopology::DUAL_LM_MERGE: *hw_topology = kDualLMMerge; break; |
| case DRMTopology::DUAL_LM_MERGE_DSC: *hw_topology = kDualLMMergeDSC; break; |
| case DRMTopology::DUAL_LM_DSCMERGE: *hw_topology = kDualLMDSCMerge; break; |
| case DRMTopology::QUAD_LM_MERGE: *hw_topology = kQuadLMMerge; break; |
| case DRMTopology::QUAD_LM_DSCMERGE: *hw_topology = kQuadLMDSCMerge; break; |
| case DRMTopology::QUAD_LM_MERGE_DSC: *hw_topology = kQuadLMMergeDSC; break; |
| case DRMTopology::QUAD_LM_DSC4HSMERGE: *hw_topology = kQuadLMDSC4HSMerge; break; |
| case DRMTopology::PPSPLIT: *hw_topology = kPPSplit; break; |
| default: *hw_topology = kUnknown; break; |
| } |
| } |
| |
| void HWDeviceDRM::SetMultiRectMode(const uint32_t flags, DRMMultiRectMode *target) { |
| *target = DRMMultiRectMode::NONE; |
| if (flags & kMultiRect) { |
| *target = DRMMultiRectMode::SERIAL; |
| if (flags & kMultiRectParallelMode) { |
| *target = DRMMultiRectMode::PARALLEL; |
| } |
| } |
| } |
| |
| void HWDeviceDRM::SetSsppTonemapFeatures(HWPipeInfo *pipe_info) { |
| if (pipe_info->dgm_csc_info.op != kNoOp) { |
| SDECsc csc = {}; |
| SetDGMCsc(pipe_info->dgm_csc_info, &csc); |
| DLOGV_IF(kTagDriverConfig, "Call Perform DGM CSC Op = %s", |
| (pipe_info->dgm_csc_info.op == kSet) ? "Set" : "Reset"); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_DGM_CSC_CONFIG, pipe_info->pipe_id, |
| reinterpret_cast<uint64_t>(&csc.csc_v1)); |
| } |
| if (pipe_info->inverse_pma_info.op != kNoOp) { |
| DLOGV_IF(kTagDriverConfig, "Call Perform Inverse PMA Op = %s", |
| (pipe_info->inverse_pma_info.op == kSet) ? "Set" : "Reset"); |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_INVERSE_PMA, pipe_info->pipe_id, |
| (pipe_info->inverse_pma_info.inverse_pma) ? 1: 0); |
| } |
| SetSsppLutFeatures(pipe_info); |
| } |
| |
| void HWDeviceDRM::SetDGMCsc(const HWPipeCscInfo &dgm_csc_info, SDECsc *csc) { |
| SetDGMCscV1(dgm_csc_info.csc, &csc->csc_v1); |
| } |
| |
| void HWDeviceDRM::SetDGMCscV1(const HWCsc &dgm_csc, sde_drm_csc_v1 *csc_v1) { |
| uint32_t i = 0; |
| for (i = 0; i < MAX_CSC_MATRIX_COEFF_SIZE; i++) { |
| csc_v1->ctm_coeff[i] = dgm_csc.ctm_coeff[i]; |
| DLOGV_IF(kTagDriverConfig, " DGM csc_v1[%d] = %lld", i, csc_v1->ctm_coeff[i]); |
| } |
| for (i = 0; i < MAX_CSC_BIAS_SIZE; i++) { |
| csc_v1->pre_bias[i] = dgm_csc.pre_bias[i]; |
| csc_v1->post_bias[i] = dgm_csc.post_bias[i]; |
| } |
| for (i = 0; i < MAX_CSC_CLAMP_SIZE; i++) { |
| csc_v1->pre_clamp[i] = dgm_csc.pre_clamp[i]; |
| csc_v1->post_clamp[i] = dgm_csc.post_clamp[i]; |
| } |
| } |
| |
| void HWDeviceDRM::SetSsppLutFeatures(HWPipeInfo *pipe_info) { |
| for (HWPipeTonemapLutInfo &lut_info : pipe_info->lut_info) { |
| if (lut_info.op != kNoOp) { |
| std::shared_ptr<PPFeatureInfo> feature = lut_info.pay_load; |
| if (feature == nullptr) { |
| DLOGE("Null Pointer for Op = %d lut type = %d", lut_info.op, lut_info.type); |
| continue; |
| } |
| DRMPPFeatureInfo kernel_params = {}; |
| std::vector<DRMPPFeatureID> drm_id = {}; |
| PPBlock pp_block = GetPPBlock(lut_info.type); |
| hw_color_mgr_->ToDrmFeatureId(pp_block, feature->feature_id_, &drm_id); |
| for (DRMPPFeatureID id : drm_id) { |
| if (id >= kPPFeaturesMax) { |
| DLOGE("Invalid feature id %d", id); |
| continue; |
| } |
| kernel_params.id = id; |
| bool disable = (lut_info.op == kReset); |
| DLOGV_IF(kTagDriverConfig, "Lut Type = %d PPBlock = %d Op = %s Disable = %d Feature = %p", |
| lut_info.type, pp_block, (lut_info.op ==kSet) ? "Set" : "Reset", disable, |
| feature.get()); |
| int ret = hw_color_mgr_->GetDrmFeature(feature.get(), &kernel_params, disable); |
| if (!ret) { |
| drm_atomic_intf_->Perform(DRMOps::PLANE_SET_POST_PROC, pipe_info->pipe_id, |
| &kernel_params); |
| hw_color_mgr_->FreeDrmFeatureData(&kernel_params); |
| } else { |
| DLOGE("GetDrmFeature failed for Lut type = %d", lut_info.type); |
| } |
| } |
| drm_id.clear(); |
| } |
| } |
| } |
| |
| void HWDeviceDRM::AddDimLayerIfNeeded() { |
| if (secure_display_active_ && hw_resource_.secure_disp_blend_stage >= 0) { |
| HWSolidfillStage sf = {}; |
| sf.z_order = UINT32(hw_resource_.secure_disp_blend_stage); |
| sf.roi = { 0.0, 0.0, FLOAT(mixer_attributes_.width), FLOAT(mixer_attributes_.height) }; |
| solid_fills_.clear(); |
| AddSolidfillStage(sf, 0xFF); |
| SetSolidfillStages(); |
| } |
| |
| if (!secure_display_active_) { |
| DRMSecurityLevel crtc_security_level = DRMSecurityLevel::SECURE_NON_SECURE; |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_SECURITY_LEVEL, token_.crtc_id, crtc_security_level); |
| } |
| } |
| |
| DisplayError HWDeviceDRM::NullCommit(bool synchronous, bool retain_planes) { |
| DTRACE_SCOPED(); |
| AddDimLayerIfNeeded(); |
| drm_atomic_intf_->Perform(DRMOps::NULL_COMMIT_PANEL_FEATURES, 0 /* argument is not used */); |
| int ret = drm_atomic_intf_->Commit(synchronous , retain_planes); |
| if (ret) { |
| DLOGE("failed with error %d, crtc=%u", ret, token_.crtc_id); |
| return kErrorHardware; |
| } |
| DLOGI("Null commit succeeded crtc=%u", token_.crtc_id); |
| |
| if (first_null_cycle_) |
| first_null_cycle_ = false; |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::DumpConnectorModeInfo() { |
| for (uint32_t i = 0; i < (uint32_t)connector_info_.modes.size(); i++) { |
| DLOGI("Display %d-%d Mode[%d] Name:%s vref:%d hdisp:%d hsync_s:%d hsync_e:%d htotal:%d " \ |
| "vdisp:%d vsync_s:%d vsync_e:%d vtotal:%d\n", display_id_, disp_type_, i, |
| connector_info_.modes[i].mode.name, |
| connector_info_.modes[i].mode.vrefresh, connector_info_.modes[i].mode.hdisplay, |
| connector_info_.modes[i].mode.hsync_start, connector_info_.modes[i].mode.hsync_end, |
| connector_info_.modes[i].mode.htotal, connector_info_.modes[i].mode.vdisplay, |
| connector_info_.modes[i].mode.vsync_start, connector_info_.modes[i].mode.vsync_end, |
| connector_info_.modes[i].mode.vtotal); |
| } |
| } |
| |
| void HWDeviceDRM::ResetROI() { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_ROI, token_.crtc_id, 0, nullptr); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_ROI, token_.conn_id, 0, nullptr); |
| } |
| |
| bool HWDeviceDRM::IsFullFrameUpdate(const HWLayersInfo &hw_layer_info) { |
| // Perform Full Frame Update for video mode |
| if (connector_info_.modes[current_mode_index_].cur_panel_mode & DRM_MODE_FLAG_VID_MODE_PANEL) { |
| return true; |
| } |
| |
| LayerRect full_frame = {0, 0, FLOAT(mixer_attributes_.width), FLOAT(mixer_attributes_.height)}; |
| |
| const LayerRect &frame_roi = hw_layer_info.left_frame_roi.at(0); |
| // If multiple ROIs are present, then it's not fullscreen update. |
| if (hw_layer_info.left_frame_roi.size() > 1 || |
| (IsValid(frame_roi) && !IsCongruent(full_frame, frame_roi))) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| DisplayError HWDeviceDRM::SetDynamicDSIClock(uint64_t bit_clk_rate) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::GetDynamicDSIClock(uint64_t *bit_clk_rate) { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWDeviceDRM::UpdateTransferTime(uint32_t transfer_time) { |
| connector_info_.modes[current_mode_index_].transfer_time_us = transfer_time; |
| PopulateHWPanelInfo(); |
| transfer_time_updated_ = transfer_time; |
| synchronous_commit_ = true; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetJitterConfig(uint32_t jitter_type, float value, uint32_t time) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_JITTER_CONFIG, token_.conn_id, jitter_type, value, |
| time); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_TRANSFER_TIME, token_.conn_id, |
| &transfer_time_updated_); |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::DumpHWLayers(HWLayersInfo *hw_layers_info) { |
| DestScaleInfoMap &dest_scale_info_map = hw_layers_info->dest_scale_info_map; |
| uint32_t hw_layer_count = UINT32(hw_layers_info->hw_layers.size()); |
| std::vector<LayerRect> &left_frame_roi = hw_layers_info->left_frame_roi; |
| std::vector<LayerRect> &right_frame_roi = hw_layers_info->right_frame_roi; |
| DLOGI("HWLayers Stack: layer_count: %d, app_layer_count: %d, gpu_target_index: %d", |
| hw_layer_count, hw_layers_info->app_layer_count, hw_layers_info->gpu_target_index); |
| DLOGI("LayerStackFlags = 0x%" PRIu32 ", blend_cs = {primaries = %d, transfer = %d}", |
| UINT32(hw_layers_info->flags.flags), UINT32(hw_layers_info->blend_cs.primaries), |
| UINT32(hw_layers_info->blend_cs.transfer)); |
| for (uint32_t i = 0; i < left_frame_roi.size(); i++) { |
| DLOGI("left_frame_roi: x = %d, y = %d, w = %d, h = %d", INT(left_frame_roi[i].left), |
| INT(left_frame_roi[i].top), INT(left_frame_roi[i].right), INT(left_frame_roi[i].bottom)); |
| } |
| for (uint32_t i = 0; i < right_frame_roi.size(); i++) { |
| DLOGI("right_frame_roi: x = %d, y = %d, w = %d h = %d", INT(right_frame_roi[i].left), |
| INT(right_frame_roi[i].top), INT(right_frame_roi[i].right), |
| INT(right_frame_roi[i].bottom)); |
| } |
| |
| for (uint32_t i = 0; i < dest_scale_info_map.size(); i++) { |
| HWDestScaleInfo *dest_scalar_data = dest_scale_info_map[i]; |
| if (dest_scalar_data->scale_data.enable.scale) { |
| HWScaleData &scale_data = dest_scalar_data->scale_data; |
| DLOGI("Dest scalar index %d Mixer WxH %dx%d", i, |
| dest_scalar_data->mixer_width, dest_scalar_data->mixer_height); |
| DLOGI("Panel ROI [%d, %d, %d, %d]", INT(dest_scalar_data->panel_roi.left), |
| INT(dest_scalar_data->panel_roi.top), INT(dest_scalar_data->panel_roi.right), |
| INT(dest_scalar_data->panel_roi.bottom)); |
| DLOGI("Dest scalar Dst WxH %dx%d", scale_data.dst_width, scale_data.dst_height); |
| } |
| } |
| |
| for (uint32_t i = 0; i < hw_layer_count; i++) { |
| HWLayerConfig &hw_config = hw_layers_info->config[i]; |
| HWRotatorSession &hw_rotator_session = hw_config.hw_rotator_session; |
| HWSessionConfig &hw_session_config = hw_rotator_session.hw_session_config; |
| DLOGI("========================= HW_layer: %d =========================", i); |
| DLOGI("src_width = %d, src_height = %d, src_format = %d, src_LayerBufferFlags = 0x%" PRIx32 , |
| hw_layers_info->hw_layers[i].input_buffer.width, |
| hw_layers_info->hw_layers[i].input_buffer.height, |
| hw_layers_info->hw_layers[i].input_buffer.format, |
| hw_layers_info->hw_layers[i].input_buffer.flags.flags); |
| |
| if (hw_config.use_inline_rot) { |
| DLOGI("rotator = %s, rotation = %d, flip_horizontal = %s, flip_vertical = %s", |
| "inline rotator", INT(hw_session_config.transform.rotation), |
| hw_session_config.transform.flip_horizontal ? "true" : "false", |
| hw_session_config.transform.flip_vertical ? "true" : "false"); |
| } else if (hw_rotator_session.mode == kRotatorOffline) { |
| DLOGI("rotator = %s, rotation = %d, flip_horizontal = %s, flip_vertical = %s", |
| "offline rotator", INT(hw_session_config.transform.rotation), |
| hw_session_config.transform.flip_horizontal ? "true" : "false", |
| hw_session_config.transform.flip_vertical ? "true" : "false"); |
| } |
| if (hw_config.use_solidfill_stage) { |
| HWSolidfillStage &hw_solidfill_stage = hw_config.hw_solidfill_stage; |
| LayerSolidFill &solid_fill_info = hw_solidfill_stage.solid_fill_info; |
| DLOGI("HW Solid fill info: z_order = %d, color = %d", hw_solidfill_stage.z_order, |
| hw_solidfill_stage.color); |
| DLOGI("bit_depth = %d, red = %d, green = %d, blue = %d, alpha = %d", |
| solid_fill_info.bit_depth, solid_fill_info.red, solid_fill_info.green, |
| solid_fill_info.blue, solid_fill_info.alpha); |
| } |
| for (uint32_t count = 0; count < 2; count++) { |
| HWPipeInfo &left_pipe = hw_config.left_pipe; |
| HWPipeInfo &right_pipe = hw_config.right_pipe; |
| HWPipeInfo &pipe_info = (count == 0) ? left_pipe : right_pipe; |
| HWScaleData &scale_data = pipe_info.scale_data; |
| if (!pipe_info.valid) { |
| continue; |
| } |
| std::string pipe = (count == 0) ? "left_pipe" : "right_pipe"; |
| DLOGI("pipe = %s, pipe_id = %d, z_order = %d, flags = 0x%X", |
| pipe.c_str(), pipe_info.pipe_id, pipe_info.z_order, pipe_info.flags); |
| DLOGI("src_rect: x = %d, y = %d, w = %d, h = %d", INT(pipe_info.src_roi.left), |
| INT(pipe_info.src_roi.top), INT(pipe_info.src_roi.right - pipe_info.src_roi.left), |
| INT(pipe_info.src_roi.bottom - pipe_info.src_roi.top)); |
| DLOGI("dst_rect: x = %d, y = %d, w = %d, h = %d", INT(pipe_info.dst_roi.left), |
| INT(pipe_info.dst_roi.top), INT(pipe_info.dst_roi.right - pipe_info.dst_roi.left), |
| INT(pipe_info.dst_roi.bottom - pipe_info.dst_roi.top)); |
| DLOGI("excl_rect: left = %d, top = %d, right = %d, bottom = %d", |
| INT(pipe_info.excl_rect.left), INT(pipe_info.excl_rect.top), |
| INT(pipe_info.excl_rect.right), INT(pipe_info.excl_rect.bottom)); |
| if (scale_data.enable.scale) { |
| DLOGI("HWScaleData enable flags: scale = %s, direction_detection = %s, detail_enhance = %s," |
| " dyn_exp_disable = %s", scale_data.enable.scale ? "true" : "false", |
| scale_data.enable.direction_detection ? "true" : "false", |
| scale_data.enable.detail_enhance ? "true" : "false", |
| scale_data.enable.dyn_exp_disable ? "true" : "false"); |
| DLOGI("lut_flags: lut_swap = 0x%X, lut_dir_wr = 0x%X, lut_y_cir_wr = 0x%X, " |
| "lut_uv_cir_wr = 0x%X, lut_y_sep_wr = 0x%X, lut_uv_sep_wr = 0x%X", |
| scale_data.lut_flag.lut_swap, scale_data.lut_flag.lut_dir_wr, |
| scale_data.lut_flag.lut_y_cir_wr, scale_data.lut_flag.lut_uv_cir_wr, |
| scale_data.lut_flag.lut_y_sep_wr, scale_data.lut_flag.lut_uv_sep_wr); |
| DLOGI("dir_lut_idx = %d, y_rgb_cir_lut_idx = %d, uv_cir_lut_idx = %d, " |
| "y_rgb_sep_lut_idx = %d, uv_sep_lut_idx = %d", scale_data.dir_lut_idx, |
| scale_data.y_rgb_cir_lut_idx, scale_data.uv_cir_lut_idx, |
| scale_data.y_rgb_sep_lut_idx, scale_data.uv_sep_lut_idx); |
| } |
| } |
| } |
| } |
| |
| DisplayError HWDeviceDRM::SetBlendSpace(const PrimariesTransfer &blend_space) { |
| blend_space_ = blend_space; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetDRMPowerMode(const HWPowerState &power_state, |
| DRMPowerMode *drm_power_mode) { |
| if (!drm_power_mode) { |
| return kErrorParameters; |
| } |
| |
| switch (power_state) { |
| case kPowerStateOn: |
| *drm_power_mode = DRMPowerMode::ON; |
| break; |
| case kPowerStateOff: |
| *drm_power_mode = DRMPowerMode::OFF; |
| break; |
| case kPowerStateDoze: |
| *drm_power_mode = DRMPowerMode::DOZE; |
| break; |
| case kPowerStateDozeSuspend: |
| *drm_power_mode = DRMPowerMode::DOZE_SUSPEND; |
| break; |
| default: |
| return kErrorParameters; |
| } |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::SetTUIState() { |
| if (tui_state_ == kTUIStateStart) { |
| tui_state_ = kTUIStateInProgress; |
| } else if (tui_state_ == kTUIStateEnd) { |
| tui_state_ = kTUIStateNone; |
| } else if (tui_state_ == kTUIStateInProgress) { |
| tui_state_ = kTUIStateNone; |
| } |
| } |
| |
| void HWDeviceDRM::SetTopologySplit(HWTopology hw_topology, uint32_t *split_number) { |
| switch (hw_topology) { |
| case kDualLM: |
| case kDualLMDSC: |
| case kDualLMMerge: |
| case kDualLMMergeDSC: |
| case kDualLMDSCMerge: |
| *split_number = 2; |
| break; |
| case kQuadLMMerge: |
| case kQuadLMDSCMerge: |
| case kQuadLMMergeDSC: |
| case kQuadLMDSC4HSMerge: |
| *split_number = 4; |
| break; |
| case kPPSplit: |
| default: |
| *split_number = 1; |
| } |
| } |
| |
| uint64_t HWDeviceDRM::GetSupportedBitClkRate(uint32_t new_mode_index, |
| uint64_t bit_clk_rate_request) { |
| if (current_mode_index_ == new_mode_index) { |
| uint32_t submode_idx = connector_info_.modes[current_mode_index_].curr_submode_index; |
| sde_drm::DRMSubModeInfo curr_sub_mode = |
| connector_info_.modes[current_mode_index_].sub_modes[submode_idx]; |
| if ((std::find(curr_sub_mode.dyn_bitclk_list.begin(), curr_sub_mode.dyn_bitclk_list.end(), |
| bit_clk_rate_request) != curr_sub_mode.dyn_bitclk_list.end())) { |
| return bit_clk_rate_request; |
| } else { |
| DLOGW("Requested rate not supported: %" PRIu64, bit_clk_rate_request); |
| return connector_info_.modes[current_mode_index_].curr_bit_clk_rate; |
| } |
| } |
| |
| uint32_t submode_idx = connector_info_.modes[new_mode_index].curr_submode_index; |
| sde_drm::DRMSubModeInfo curr_sub_mode = |
| connector_info_.modes[new_mode_index].sub_modes[submode_idx]; |
| if ((std::find(curr_sub_mode.dyn_bitclk_list.begin(), curr_sub_mode.dyn_bitclk_list.end(), |
| bit_clk_rate_request) != curr_sub_mode.dyn_bitclk_list.end())) { |
| return bit_clk_rate_request; |
| } else { |
| DLOGW("Requested rate not supported: %" PRIu64, bit_clk_rate_request); |
| return connector_info_.modes[new_mode_index].default_bit_clk_rate; |
| } |
| } |
| |
| bool HWDeviceDRM::SetupConcurrentWriteback(const HWLayersInfo &hw_layer_info, bool validate, |
| int64_t *release_fence_fd) { |
| std::lock_guard<std::mutex> lock(cwb_state_lock_); |
| bool enable = hw_resource_.has_concurrent_writeback && hw_layer_info.output_buffer; |
| if (!(enable || cwb_config_.enabled)) { // the frame is neither cwb setup nor cwb teardown frame |
| cwb_config_.cwb_disp_id = -1; |
| return false; |
| } |
| |
| if (cwb_config_.cwb_disp_id != -1 && cwb_config_.cwb_disp_id != display_id_) { |
| // Either cwb is currently active or tearing down on display cwb_config_.cwb_disp_id |
| DLOGW("On display %d-%d CWB already busy with display : %d", display_id_, disp_type_, |
| cwb_config_.cwb_disp_id); |
| return false; |
| } else { |
| cwb_config_.cwb_disp_id = display_id_; |
| } |
| |
| bool setup_modes = enable && !cwb_config_.enabled; |
| // Modes can be setup in prepare or commit path. |
| if (setup_modes && (SetupConcurrentWritebackModes() == kErrorNone)) { |
| cwb_config_.enabled = true; |
| } |
| |
| if (cwb_config_.enabled) { |
| if (enable) { |
| // Set DRM properties for Concurrent Writeback. |
| ConfigureConcurrentWriteback(hw_layer_info); |
| |
| if (!validate && release_fence_fd) { |
| // Set GET_RETIRE_FENCE property to get Concurrent Writeback fence. |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_GET_RETIRE_FENCE, cwb_config_.token.conn_id, |
| release_fence_fd); |
| return true; |
| } |
| } else { |
| // Tear down the Concurrent Writeback topology. |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, cwb_config_.token.conn_id, 0); |
| DLOGI("Tear down the Concurrent Writeback topology"); |
| } |
| } |
| |
| return false; |
| } |
| |
| DisplayError HWDeviceDRM::SetupConcurrentWritebackModes() { |
| // To setup Concurrent Writeback topology, get the Connector ID of Virtual display |
| if (drm_mgr_intf_->RegisterDisplay(DRMDisplayType::VIRTUAL, &cwb_config_.token)) { |
| DLOGW("RegisterDisplay failed for Concurrent Writeback"); |
| return kErrorResources; |
| } |
| |
| // Set the modes based on Primary display. |
| std::vector<drmModeModeInfo> modes; |
| for (auto &item : connector_info_.modes) { |
| modes.push_back(item.mode); |
| } |
| |
| // Inform the mode list to driver. |
| struct sde_drm_wb_cfg cwb_cfg = {}; |
| cwb_cfg.connector_id = cwb_config_.token.conn_id; |
| cwb_cfg.flags = SDE_DRM_WB_CFG_FLAGS_CONNECTED; |
| cwb_cfg.count_modes = UINT32(modes.size()); |
| cwb_cfg.modes = (uint64_t)modes.data(); |
| |
| int ret = -EINVAL; |
| #ifdef DRM_IOCTL_SDE_WB_CONFIG |
| ret = drmIoctl(dev_fd_, DRM_IOCTL_SDE_WB_CONFIG, &cwb_cfg); |
| #endif |
| if (ret) { |
| drm_mgr_intf_->UnregisterDisplay(&(cwb_config_.token)); |
| DLOGE("Dump CWBConfig: mode_count %d flags %x", cwb_cfg.count_modes, cwb_cfg.flags); |
| DumpConnectorModeInfo(); |
| return kErrorHardware; |
| } |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::ConfigureConcurrentWriteback(const HWLayersInfo &hw_layer_info) { |
| CwbConfig *cwb_config = hw_layer_info.hw_cwb_config; |
| std::shared_ptr<LayerBuffer> output_buffer = hw_layer_info.output_buffer; |
| registry_.MapOutputBufferToFbId(output_buffer); |
| uint32_t &vitual_conn_id = cwb_config_.token.conn_id; |
| |
| // Set the topology for Concurrent Writeback: [CRTC_PRIMARY_DISPLAY - CONNECTOR_VIRTUAL_DISPLAY]. |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_CRTC, vitual_conn_id, token_.crtc_id); |
| |
| // Set CRTC Capture Mode |
| DRMCWbCaptureMode capture_mode = DRMCWbCaptureMode::MIXER_OUT; |
| if (cwb_config->tap_point == CwbTapPoint::kDsppTapPoint) { |
| capture_mode = DRMCWbCaptureMode::DSPP_OUT; |
| } else if (cwb_config->tap_point == CwbTapPoint::kDemuraTapPoint) { |
| capture_mode = DRMCWbCaptureMode::DEMURA_OUT; |
| } |
| |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_CAPTURE_MODE, token_.crtc_id, capture_mode); |
| |
| // Set Connector Output FB |
| uint32_t fb_id = registry_.GetOutputFbId(output_buffer->handle_id); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_OUTPUT_FB_ID, vitual_conn_id, fb_id); |
| |
| // Set Connector Secure Mode |
| bool secure = output_buffer->flags.secure; |
| DRMSecureMode mode = secure ? DRMSecureMode::SECURE : DRMSecureMode::NON_SECURE; |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_FB_SECURE_MODE, vitual_conn_id, mode); |
| |
| // Set Connector Output Rect |
| sde_drm::DRMRect full_frame = {}; |
| full_frame.left = 0; |
| full_frame.top = 0; |
| |
| if (capture_mode == DRMCWbCaptureMode::MIXER_OUT) { |
| full_frame.right = mixer_attributes_.width; |
| full_frame.bottom = mixer_attributes_.height; |
| } else { |
| full_frame.right = display_attributes_[current_mode_index_].x_pixels; |
| full_frame.bottom = display_attributes_[current_mode_index_].y_pixels; |
| } |
| |
| sde_drm::DRMRect cwb_dst = full_frame; |
| LayerRect cwb_roi = cwb_config->cwb_roi; |
| |
| if (has_cwb_crop_) { // If CWB ROI feature is supported, then set WB connector's roi_v1 property |
| // to PU ROI and DST_* properties to CWB ROI. Else, set DST_* properties to full frame ROI. |
| bool is_full_frame_update = IsFullFrameUpdate(hw_layer_info); |
| // Set WB connector's roi_v1 property to PU_ROI. |
| if (is_full_frame_update) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_ROI, vitual_conn_id, 0, nullptr); |
| DLOGV_IF(kTagDriverConfig, "roi_v1 of virtual connector is set NULL (Full Frame update)."); |
| } else { |
| const int kNumMaxROIs = 4; |
| sde_drm::DRMRect conn_rects[kNumMaxROIs] = {full_frame}; |
| for (uint32_t i = 0; i < hw_layer_info.left_frame_roi.size(); i++) { |
| auto &roi = hw_layer_info.left_frame_roi.at(i); |
| conn_rects[i].left = UINT32(roi.left); |
| conn_rects[i].right = UINT32(roi.right); |
| conn_rects[i].top = UINT32(roi.top); |
| conn_rects[i].bottom = UINT32(roi.bottom); |
| } |
| uint32_t num_rects = std::max(1u, UINT32(hw_layer_info.left_frame_roi.size())); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_ROI, vitual_conn_id, num_rects, conn_rects); |
| } |
| |
| // Set WB connector's DST_* property to CWB_ROI. |
| if (!is_full_frame_update || !cwb_config->pu_as_cwb_roi) { |
| // Either incase of partial update or when client requests only its specified ROI to be set |
| // as CWB ROI without including PU ROI in it (by setting pu_as_cwb_roi flag as false), then |
| // set DST_* properties to aligned client specified ROI. This if condition is an optimization |
| // check. Either we can keep this if with both the conditions or we can remove the if at all |
| // with direct setting of the properties. This if condition prevents reseting cwb_dst to full |
| // frame incase of full frame PU ROI with client requesting PU ROI to be included in CWB ROI. |
| cwb_dst.left = UINT32(cwb_roi.left); |
| cwb_dst.right = UINT32(cwb_roi.right); |
| cwb_dst.top = UINT32(cwb_roi.top); |
| cwb_dst.bottom = UINT32(cwb_roi.bottom); |
| } |
| } |
| |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_OUTPUT_RECT, vitual_conn_id, cwb_dst); |
| ConfigureCWBDither(cwb_config->dither_info, vitual_conn_id, capture_mode); |
| |
| DLOGV_IF(kTagDriverConfig, "CWB Mode:%d roi.left:%u roi.top:%u roi.right:%u roi.bottom:%u", |
| capture_mode, cwb_dst.left, cwb_dst.top, cwb_dst.right, cwb_dst.bottom); |
| } |
| |
| DisplayError HWDeviceDRM::TeardownConcurrentWriteback(void) { |
| if (cwb_config_.enabled) { |
| drm_mgr_intf_->UnregisterDisplay(&(cwb_config_.token)); |
| cwb_config_.enabled = false; |
| registry_.Clear(); |
| } |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::PostCommitConcurrentWriteback(std::shared_ptr<LayerBuffer> output_buffer) { |
| if (hw_resource_.has_concurrent_writeback && output_buffer) { |
| return; |
| } |
| |
| std::lock_guard<std::mutex> lock(cwb_state_lock_); |
| if (cwb_config_.cwb_disp_id == display_id_) { |
| TeardownConcurrentWriteback(); |
| } |
| } |
| |
| DisplayError HWDeviceDRM::GetFeatureSupportStatus(const HWFeature feature, uint32_t *status) { |
| DisplayError error = kErrorNone; |
| |
| if (!status) { |
| return kErrorParameters; |
| } |
| |
| switch (feature) { |
| case kAllowedModeSwitch: |
| *status = connector_info_.modes[current_mode_index_].allowed_mode_switch; |
| break; |
| case kHasCwbCrop: |
| *status = UINT32(has_cwb_crop_); |
| break; |
| case kHasDedicatedCwb: |
| *status = UINT32(has_dedicated_cwb_); |
| break; |
| default: |
| DLOGW("Unable to get status of feature : %d", feature); |
| error = kErrorParameters; |
| break; |
| } |
| |
| return error; |
| } |
| |
| void HWDeviceDRM::FlushConcurrentWriteback() { |
| std::lock_guard<std::mutex> lock(cwb_state_lock_); |
| TeardownConcurrentWriteback(); |
| cwb_config_.cwb_disp_id = -1; |
| DLOGI("Flushing out CWB Config. cwb_enabled = %d , cwb_disp_id : %d", cwb_config_.enabled, |
| cwb_config_.cwb_disp_id); |
| } |
| |
| DisplayError HWDeviceDRM::ConfigureCWBDither(void *payload, uint32_t conn_id, |
| sde_drm::DRMCWbCaptureMode mode) { |
| int ret = 0; |
| DRMPPFeatureInfo kernel_params = {}; |
| |
| if (has_cwb_dither_) { |
| kernel_params.id = DRMPPFeatureID::kFeatureCWBDither; |
| } else { |
| kernel_params.id = DRMPPFeatureID::kFeatureDither; |
| DLOGI_IF(kTagDriverConfig, "On display %d-%d pp cwb blocks not supported, to" |
| " config pp-dither hw", display_id_, disp_type_); |
| } |
| |
| if (payload && (mode == sde_drm::DRMCWbCaptureMode::DSPP_OUT || |
| mode == sde_drm::DRMCWbCaptureMode::DEMURA_OUT)) { |
| PPFeatureInfo * feature_wrapper = reinterpret_cast<PPFeatureInfo *>(payload); |
| ret = hw_color_mgr_->GetDrmFeature(feature_wrapper, &kernel_params); |
| if (ret) |
| DLOGE("Failed to get drm feature %d params on display %d-%d, ret %d", kernel_params.id, |
| display_id_, disp_type_, ret); |
| } else { |
| kernel_params.type = sde_drm::kPropBlob; |
| kernel_params.payload = NULL; |
| } |
| |
| DLOGI_IF(kTagDriverConfig, "On display %d-%d CWB dither %s case", display_id_, disp_type_, |
| kernel_params.payload ? "enable" : "disable"); |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POST_PROC, conn_id, &kernel_params); |
| hw_color_mgr_->FreeDrmFeatureData(&kernel_params); |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::GetPanelBlMaxLvl(uint32_t *bl_max) { |
| if (!bl_max) { |
| DLOGE("Display %d-%d Invalid input param", display_id_, disp_type_); |
| return kErrorParameters; |
| } |
| |
| *bl_max = connector_info_.max_panel_backlight; |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::SetPPConfig(void *payload, size_t size) { |
| if (!payload || size != sizeof(DRMPPFeatureInfo)) { |
| DLOGE("Invalid input params on display %d-%d payload %pK, size %zd expect size %zd", |
| display_id_, disp_type_, payload, size, sizeof(DRMPPFeatureInfo)); |
| return kErrorParameters; |
| } |
| |
| struct DRMPPFeatureInfo *info = reinterpret_cast<struct DRMPPFeatureInfo *> (payload); |
| |
| if (info->object_type == DRM_MODE_OBJECT_CONNECTOR && token_.conn_id) { |
| drm_atomic_intf_->Perform(DRMOps::CONNECTOR_SET_POST_PROC, token_.conn_id, payload); |
| } else if (info->object_type == DRM_MODE_OBJECT_CRTC && token_.crtc_id) { |
| drm_atomic_intf_->Perform(DRMOps::CRTC_SET_POST_PROC, token_.crtc_id, payload); |
| } else { |
| DLOGE("Invalid feature input, obj_type: 0x%x , feature_id: %d, event_type: 0x%x", |
| info->object_type, info->id, info->event_type); |
| return kErrorParameters; |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWDeviceDRM::CancelDeferredPowerMode() { |
| DLOGI("Pending state reset %d on CRTC: %u", pending_power_state_, token_.crtc_id); |
| pending_power_state_ = kPowerStateNone; |
| |
| return kErrorNone; |
| } |
| |
| void HWDeviceDRM::HandleCwbTeardown() { |
| DLOGI("Pending CWB teardown on CRTC: %u", token_.crtc_id); |
| pending_cwb_teardown_ = true; |
| } |
| |
| } // namespace sdm |