| /* |
| * Copyright (c) 2014-2021, The Linux Foundation. All rights reserved. |
| * |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted (subject to the limitations in the |
| * disclaimer below) provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <cutils/properties.h> |
| #include <sync/sync.h> |
| #include <utils/constants.h> |
| #include <utils/debug.h> |
| #include <utils/utils.h> |
| #include <stdarg.h> |
| #include <sys/mman.h> |
| |
| #include <map> |
| #include <string> |
| #include <vector> |
| |
| #include "hwc_display_builtin.h" |
| #include "hwc_color_mode_stc.h" |
| #include "hwc_debugger.h" |
| #include "hwc_session.h" |
| |
| #define __CLASS__ "HWCDisplayBuiltIn" |
| |
| namespace sdm { |
| |
| static void SetRect(LayerRect &src_rect, GLRect *target) { |
| target->left = src_rect.left; |
| target->top = src_rect.top; |
| target->right = src_rect.right; |
| target->bottom = src_rect.bottom; |
| } |
| |
| int HWCDisplayBuiltIn::Create(CoreInterface *core_intf, BufferAllocator *buffer_allocator, |
| HWCCallbacks *callbacks, HWCDisplayEventHandler *event_handler, |
| qService::QService *qservice, hwc2_display_t id, int32_t sdm_id, |
| HWCDisplay **hwc_display) { |
| int status = 0; |
| uint32_t builtin_width = 0; |
| uint32_t builtin_height = 0; |
| |
| HWCDisplay *hwc_display_builtin = |
| new HWCDisplayBuiltIn(core_intf, static_cast<HWCBufferAllocator *>(buffer_allocator), |
| callbacks, event_handler, qservice, id, sdm_id); |
| status = hwc_display_builtin->Init(); |
| if (status) { |
| delete hwc_display_builtin; |
| return status; |
| } |
| |
| hwc_display_builtin->GetMixerResolution(&builtin_width, &builtin_height); |
| int width = 0, height = 0; |
| HWCDebugHandler::Get()->GetProperty(FB_WIDTH_PROP, &width); |
| HWCDebugHandler::Get()->GetProperty(FB_HEIGHT_PROP, &height); |
| if (width > 0 && height > 0) { |
| builtin_width = UINT32(width); |
| builtin_height = UINT32(height); |
| } |
| |
| status = hwc_display_builtin->SetFrameBufferResolution(builtin_width, builtin_height); |
| if (status) { |
| Destroy(hwc_display_builtin); |
| return status; |
| } |
| |
| *hwc_display = hwc_display_builtin; |
| |
| return status; |
| } |
| |
| void HWCDisplayBuiltIn::Destroy(HWCDisplay *hwc_display) { |
| hwc_display->Deinit(); |
| delete hwc_display; |
| } |
| |
| HWCDisplayBuiltIn::HWCDisplayBuiltIn(CoreInterface *core_intf, HWCBufferAllocator *buffer_allocator, |
| HWCCallbacks *callbacks, HWCDisplayEventHandler *event_handler, |
| qService::QService *qservice, hwc2_display_t id, |
| int32_t sdm_id) |
| : HWCDisplay(core_intf, buffer_allocator, callbacks, event_handler, qservice, kBuiltIn, id, |
| sdm_id, DISPLAY_CLASS_BUILTIN), |
| buffer_allocator_(buffer_allocator), |
| cpu_hint_(NULL), layer_stitch_task_(*this) { |
| } |
| |
| int HWCDisplayBuiltIn::Init() { |
| cpu_hint_ = new CPUHint(); |
| if (cpu_hint_->Init(static_cast<HWCDebugHandler *>(HWCDebugHandler::Get())) != kErrorNone) { |
| delete cpu_hint_; |
| cpu_hint_ = NULL; |
| } |
| |
| layer_stack_.flags.use_metadata_refresh_rate = true; |
| int disable_metadata_dynfps = 0; |
| HWCDebugHandler::Get()->GetProperty(DISABLE_METADATA_DYNAMIC_FPS_PROP, &disable_metadata_dynfps); |
| if (disable_metadata_dynfps) { |
| layer_stack_.flags.use_metadata_refresh_rate = false; |
| } |
| |
| int status = HWCDisplay::Init(); |
| if (status) { |
| return status; |
| } |
| color_mode_ = new HWCColorModeStc(display_intf_); |
| color_mode_->Init(); |
| |
| int value = 0; |
| HWCDebugHandler::Get()->GetProperty(ENABLE_OPTIMIZE_REFRESH, &value); |
| enable_optimize_refresh_ = (value == 1); |
| if (enable_optimize_refresh_) { |
| DLOGI("Drop redundant drawcycles %" PRIu64 , id_); |
| } |
| |
| int vsyncs = 0; |
| HWCDebugHandler::Get()->GetProperty(TRANSIENT_FPS_CYCLE_COUNT, &vsyncs); |
| if (vsyncs > 0) { |
| SetVsyncsApplyRateChange(UINT32(vsyncs)); |
| } |
| |
| is_primary_ = display_intf_->IsPrimaryDisplay(); |
| |
| windowed_display_ = Debug::GetWindowRect(is_primary_, &window_rect_.left, &window_rect_.top, |
| &window_rect_.right, &window_rect_.bottom) == 0; |
| DLOGI("Window rect : [%f %f %f %f] is_primary_=%d", window_rect_.left, window_rect_.top, |
| window_rect_.right, window_rect_.bottom, is_primary_); |
| |
| if (is_primary_) { |
| value = 0; |
| HWCDebugHandler::Get()->GetProperty(ENABLE_POMS_DURING_DOZE, &value); |
| enable_poms_during_doze_ = (value == 1); |
| if (enable_poms_during_doze_) { |
| DLOGI("Enable POMS during Doze mode %" PRIu64 , id_); |
| } |
| } |
| |
| HWCDebugHandler::Get()->GetProperty(ENABLE_PERF_HINT_LARGE_COMP_CYCLE, |
| &perf_hint_large_comp_cycle_); |
| |
| value = 0; |
| DebugHandler::Get()->GetProperty(DISABLE_DYNAMIC_FPS, &value); |
| disable_dyn_fps_ = (value == 1); |
| |
| value = 0; |
| DebugHandler::Get()->GetProperty(ENABLE_ROUNDED_CORNER, &value); |
| enable_round_corner_ = (value == 1); |
| |
| uint32_t config_index = 0; |
| GetActiveDisplayConfig(&config_index); |
| DisplayConfigVariableInfo attr = {}; |
| GetDisplayAttributesForConfig(INT(config_index), &attr); |
| active_refresh_rate_ = attr.fps; |
| |
| DLOGI("active_refresh_rate: %d", active_refresh_rate_); |
| |
| int enhance_idle_time = 0; |
| HWCDebugHandler::Get()->GetProperty(ENHANCE_IDLE_TIME, &enhance_idle_time); |
| enhance_idle_time_ = (enhance_idle_time == 1); |
| DLOGI("enhance_idle_time: %d", enhance_idle_time); |
| |
| LoadMixedModePerfHintThreshold(); |
| |
| return status; |
| } |
| |
| void HWCDisplayBuiltIn::Dump(std::ostringstream *os) { |
| HWCDisplay::Dump(os); |
| *os << histogram.Dump(); |
| } |
| |
| void HWCDisplayBuiltIn::ValidateUiScaling() { |
| if (is_primary_ || !is_cmd_mode_) { |
| force_reset_lut_ = false; |
| return; |
| } |
| |
| for (auto &hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| if (hwc_layer->IsScalingPresent() && !layer->input_buffer.flags.video) { |
| force_reset_lut_ = true; |
| return; |
| } |
| } |
| force_reset_lut_ = false; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::PreValidateDisplay(bool *exit_validate) { |
| DTRACE_SCOPED(); |
| |
| // Draw method gets set as part of first commit. |
| SetDrawMethod(); |
| |
| auto status = HWC2::Error::None; |
| bool res_exhausted = false; |
| // If no resources are available for the current display, mark it for GPU by pass and continue to |
| // do invalidate until the resources are available |
| if (display_paused_ || CheckResourceState(&res_exhausted)) { |
| MarkLayersForGPUBypass(); |
| *exit_validate = true; |
| return status; |
| } |
| |
| if (color_tranform_failed_) { |
| // Must fall back to client composition |
| MarkLayersForClientComposition(); |
| } |
| |
| // Fill in the remaining blanks in the layers and add them to the SDM layerstack |
| BuildLayerStack(); |
| |
| // Check for scaling layers during Doze mode |
| ValidateUiScaling(); |
| |
| // Add stitch layer to layer stack. |
| AppendStitchLayer(); |
| |
| // Checks and replaces layer stack for solid fill |
| SolidFillPrepare(); |
| |
| // Apply current Color Mode and Render Intent. |
| if (color_mode_->ApplyCurrentColorModeWithRenderIntent( |
| static_cast<bool>(layer_stack_.flags.hdr_present)) != HWC2::Error::None) { |
| // Fallback to GPU Composition, if Color Mode can't be applied. |
| MarkLayersForClientComposition(); |
| } |
| |
| uint32_t refresh_rate = 0; |
| display_intf_->GetRefreshRate(&refresh_rate); |
| current_refresh_rate_ = refresh_rate; |
| |
| if (layer_set_.empty()) { |
| // Avoid flush for Command mode panel. |
| flush_ = !client_connected_; |
| *exit_validate = true; |
| return status; |
| } |
| |
| display_idle_ = false; |
| has_client_composition_ = false; |
| |
| *exit_validate = false; |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::CommitLayerStack() { |
| skip_commit_ = CanSkipCommit(); |
| return HWCDisplay::CommitLayerStack(); |
| } |
| |
| bool HWCDisplayBuiltIn::CanSkipCommit() { |
| if (layer_stack_invalid_) { |
| return false; |
| } |
| |
| // Reject repeated drawcycle requests if it satisfies all conditions. |
| // 1. None of the layerstack attributes changed. |
| // 2. No new buffer latched. |
| // 3. No refresh request triggered by HWC. |
| // 4. This display is not source of vsync. |
| // 5. No CWB client |
| bool buffers_latched = false; |
| bool needs_validation = false; |
| for (auto &hwc_layer : layer_set_) { |
| buffers_latched |= hwc_layer->BufferLatched(); |
| hwc_layer->ResetBufferFlip(); |
| needs_validation |= hwc_layer->NeedsValidation(); |
| } |
| |
| bool vsync_source = (callbacks_->GetVsyncSource() == id_); |
| |
| bool skip_commit = false; |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| skip_commit = enable_optimize_refresh_ && !pending_commit_ && !buffers_latched && |
| !pending_refresh_ && !vsync_source && (cwb_buffer_map_.size() == 0) |
| && !needs_validation; |
| } // releasing the cwb state lock |
| pending_refresh_ = false; |
| |
| return skip_commit; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::CommitStitchLayers() { |
| if (disable_layer_stitch_) { |
| return HWC2::Error::None; |
| } |
| |
| if (!display_intf_->IsValidated() || skip_commit_) { |
| return HWC2::Error::None; |
| } |
| |
| LayerStitchContext ctx = {}; |
| Layer *stitch_layer = stitch_target_->GetSDMLayer(); |
| LayerBuffer &output_buffer = stitch_layer->input_buffer; |
| for (auto &layer : layer_stack_.layers) { |
| LayerComposition &composition = layer->composition; |
| if (composition != kCompositionStitch) { |
| continue; |
| } |
| |
| StitchParams params = {}; |
| // Stitch target doesn't have an input fence. |
| // Render all layers at specified destination. |
| LayerBuffer &input_buffer = layer->input_buffer; |
| params.src_hnd = reinterpret_cast<const native_handle_t *>(input_buffer.buffer_id); |
| params.dst_hnd = reinterpret_cast<const native_handle_t *>(output_buffer.buffer_id); |
| SetRect(layer->stitch_info.dst_rect, ¶ms.dst_rect); |
| SetRect(layer->stitch_info.slice_rect, ¶ms.scissor_rect); |
| params.src_acquire_fence = input_buffer.acquire_fence; |
| |
| ctx.stitch_params.push_back(params); |
| } |
| |
| if (!ctx.stitch_params.size()) { |
| // No layers marked for stitch. |
| return HWC2::Error::None; |
| } |
| |
| layer_stitch_task_.PerformTask(LayerStitchTaskCode::kCodeStitch, &ctx); |
| // Set release fence. |
| output_buffer.acquire_fence = ctx.release_fence; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetPowerMode(HWC2::PowerMode mode, bool teardown) { |
| auto status = HWCDisplay::SetPowerMode(mode, teardown); |
| if (status != HWC2::Error::None) { |
| return status; |
| } |
| DLOGV_IF(kTagClient, "Setting Power State as \'%s\' for %d-%d", (mode == HWC2::PowerMode::On)? |
| "ON": (mode == HWC2::PowerMode::Off)? "OFF": (mode == HWC2::PowerMode::Doze)? "DOZE": |
| "DOZE_SUSPEND", sdm_id_, type_); |
| if (cpu_hint_) { |
| switch (mode) { |
| case HWC2::PowerMode::Doze: |
| case HWC2::PowerMode::DozeSuspend: |
| // Perf hal doesn't differentiate b/w doze and doze-suspend, so send doze hint for both. |
| cpu_hint_->ReqEvent(kPerfHintDisplayDoze); |
| break; |
| case HWC2::PowerMode::On: |
| cpu_hint_->ReqEvent(kPerfHintDisplayOn); |
| break; |
| case HWC2::PowerMode::Off: |
| cpu_hint_->ReqEvent(kPerfHintDisplayOff); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| is_cmd_mode_ = fixed_info.is_cmdmode; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::Present(shared_ptr<Fence> *out_retire_fence) { |
| auto status = HWC2::Error::None; |
| bool res_exhausted = false; |
| |
| DTRACE_SCOPED(); |
| |
| // Proceed only if any resources are available to be allocated for the current display, |
| // Otherwise keep doing invalidate |
| if (CheckResourceState(&res_exhausted)) { |
| Refresh(); |
| return status; |
| } |
| |
| if (display_paused_ ) { |
| return status; |
| } else { |
| if (status != HWC2::Error::None) { |
| DLOGE("Stitch failed: %d", status); |
| return status; |
| } |
| |
| status = CommitLayerStack(); |
| if (status == HWC2::Error::None) { |
| status = PostCommitLayerStack(out_retire_fence); |
| } |
| } |
| |
| // In case of scaling UI layer for command mode, clear LUTs |
| if (force_reset_lut_) { |
| display_intf_->ClearLUTs(); |
| } |
| return status; |
| } |
| |
| void HWCDisplayBuiltIn::PostCommitStitchLayers() { |
| if (disable_layer_stitch_) { |
| return; |
| } |
| |
| // Close Stitch buffer acquire fence. |
| Layer *stitch_layer = stitch_target_->GetSDMLayer(); |
| LayerBuffer &output_buffer = stitch_layer->input_buffer; |
| for (auto &layer : layer_stack_.layers) { |
| LayerComposition &composition = layer->composition; |
| if (composition != kCompositionStitch) { |
| continue; |
| } |
| LayerBuffer &input_buffer = layer->input_buffer; |
| input_buffer.release_fence = output_buffer.acquire_fence; |
| } |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetColorModes(uint32_t *out_num_modes, ColorMode *out_modes) { |
| if (out_modes == nullptr) { |
| *out_num_modes = color_mode_->GetColorModeCount(); |
| } else { |
| color_mode_->GetColorModes(out_num_modes, out_modes); |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetRenderIntents(ColorMode mode, uint32_t *out_num_intents, |
| RenderIntent *out_intents) { |
| if (out_intents == nullptr) { |
| *out_num_intents = color_mode_->GetRenderIntentCount(mode); |
| } else { |
| color_mode_->GetRenderIntents(mode, out_num_intents, out_intents); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetColorMode(ColorMode mode) { |
| return SetColorModeWithRenderIntent(mode, RenderIntent::COLORIMETRIC); |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetColorModeWithRenderIntent(ColorMode mode, RenderIntent intent) { |
| auto status = color_mode_->CacheColorModeWithRenderIntent(mode, intent); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed for mode = %d intent = %d", mode, intent); |
| return status; |
| } |
| callbacks_->Refresh(id_); |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetColorModeById(int32_t color_mode_id) { |
| auto status = color_mode_->SetColorModeById(color_mode_id); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed for mode = %d", color_mode_id); |
| return status; |
| } |
| |
| callbacks_->Refresh(id_); |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetColorModeFromClientApi(int32_t color_mode_id) { |
| DisplayError error = kErrorNone; |
| std::string mode_string; |
| |
| error = display_intf_->GetColorModeName(color_mode_id, &mode_string); |
| if (error) { |
| DLOGE("Failed to get mode name for mode %d", color_mode_id); |
| return HWC2::Error::BadParameter; |
| } |
| |
| auto status = color_mode_->SetColorModeFromClientApi(mode_string); |
| if (status != HWC2::Error::None) { |
| DLOGE("Failed to set mode = %d", color_mode_id); |
| return status; |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::RestoreColorTransform() { |
| auto status = color_mode_->RestoreColorTransform(); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed to RestoreColorTransform"); |
| return status; |
| } |
| |
| callbacks_->Refresh(id_); |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetColorTransform(const float *matrix, |
| android_color_transform_t hint) { |
| if (!matrix) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| auto status = color_mode_->SetColorTransform(matrix, hint); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed for hint = %d", hint); |
| color_tranform_failed_ = true; |
| return status; |
| } |
| |
| callbacks_->Refresh(id_); |
| color_tranform_failed_ = false; |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDisplayDppsAdROI(uint32_t h_start, uint32_t h_end, |
| uint32_t v_start, uint32_t v_end, |
| uint32_t factor_in, uint32_t factor_out) { |
| DisplayError error = kErrorNone; |
| DisplayDppsAd4RoiCfg dpps_ad4_roi_cfg = {}; |
| uint32_t panel_width = 0, panel_height = 0; |
| constexpr uint16_t kMaxFactorVal = 0xffff; |
| |
| if (h_start >= h_end || v_start >= v_end || factor_in > kMaxFactorVal || |
| factor_out > kMaxFactorVal) { |
| DLOGE("Invalid roi region = [%u, %u, %u, %u, %u, %u]", |
| h_start, h_end, v_start, v_end, factor_in, factor_out); |
| return HWC2::Error::BadParameter; |
| } |
| |
| GetPanelResolution(&panel_width, &panel_height); |
| |
| if (h_start >= panel_width || h_end > panel_width || |
| v_start >= panel_height || v_end > panel_height) { |
| DLOGE("Invalid roi region = [%u, %u, %u, %u], panel resolution = [%u, %u]", |
| h_start, h_end, v_start, v_end, panel_width, panel_height); |
| return HWC2::Error::BadParameter; |
| } |
| |
| dpps_ad4_roi_cfg.h_start = h_start; |
| dpps_ad4_roi_cfg.h_end = h_end; |
| dpps_ad4_roi_cfg.v_start = v_start; |
| dpps_ad4_roi_cfg.v_end = v_end; |
| dpps_ad4_roi_cfg.factor_in = factor_in; |
| dpps_ad4_roi_cfg.factor_out = factor_out; |
| |
| error = display_intf_->SetDisplayDppsAdROI(&dpps_ad4_roi_cfg); |
| if (error) |
| return HWC2::Error::BadConfig; |
| |
| callbacks_->Refresh(id_); |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetFrameTriggerMode(uint32_t mode) { |
| DisplayError error = kErrorNone; |
| FrameTriggerMode trigger_mode = kFrameTriggerDefault; |
| |
| if (mode >= kFrameTriggerMax) { |
| DLOGE("Invalid input mode %d", mode); |
| return HWC2::Error::BadParameter; |
| } |
| |
| trigger_mode = static_cast<FrameTriggerMode>(mode); |
| error = display_intf_->SetFrameTriggerMode(trigger_mode); |
| if (error) |
| return HWC2::Error::BadConfig; |
| |
| callbacks_->Refresh(HWC_DISPLAY_PRIMARY); |
| |
| return HWC2::Error::None; |
| } |
| |
| int HWCDisplayBuiltIn::Perform(uint32_t operation, ...) { |
| va_list args; |
| va_start(args, operation); |
| int val = 0; |
| LayerSolidFill *solid_fill_color; |
| LayerRect *rect = NULL; |
| |
| switch (operation) { |
| case SET_METADATA_DYN_REFRESH_RATE: |
| val = va_arg(args, int32_t); |
| SetMetaDataRefreshRateFlag(val); |
| break; |
| case SET_BINDER_DYN_REFRESH_RATE: |
| val = va_arg(args, int32_t); |
| ForceRefreshRate(UINT32(val)); |
| break; |
| case SET_DISPLAY_MODE: |
| val = va_arg(args, int32_t); |
| SetDisplayMode(UINT32(val)); |
| break; |
| case SET_QDCM_SOLID_FILL_INFO: |
| solid_fill_color = va_arg(args, LayerSolidFill*); |
| SetQDCMSolidFillInfo(true, *solid_fill_color); |
| break; |
| case UNSET_QDCM_SOLID_FILL_INFO: |
| solid_fill_color = va_arg(args, LayerSolidFill*); |
| SetQDCMSolidFillInfo(false, *solid_fill_color); |
| break; |
| case SET_QDCM_SOLID_FILL_RECT: |
| rect = va_arg(args, LayerRect*); |
| solid_fill_rect_ = *rect; |
| break; |
| case UPDATE_TRANSFER_TIME: |
| val = va_arg(args, int32_t); |
| UpdateTransferTime(UINT32(val)); |
| break; |
| default: |
| DLOGW("Invalid operation %d", operation); |
| va_end(args); |
| return -EINVAL; |
| } |
| va_end(args); |
| |
| return 0; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetDisplayMode(uint32_t mode) { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->SetDisplayMode(mode); |
| if (error == kErrorNone) { |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| is_cmd_mode_ = fixed_info.is_cmdmode; |
| } |
| } |
| |
| return error; |
| } |
| |
| void HWCDisplayBuiltIn::SetMetaDataRefreshRateFlag(bool enable) { |
| int disable_metadata_dynfps = 0; |
| |
| HWCDebugHandler::Get()->GetProperty(DISABLE_METADATA_DYNAMIC_FPS_PROP, &disable_metadata_dynfps); |
| if (disable_metadata_dynfps) { |
| return; |
| } |
| layer_stack_.flags.use_metadata_refresh_rate = enable; |
| } |
| |
| void HWCDisplayBuiltIn::SetQDCMSolidFillInfo(bool enable, const LayerSolidFill &color) { |
| solid_fill_enable_ = enable; |
| solid_fill_color_ = color; |
| } |
| |
| int HWCDisplayBuiltIn::GetActiveSecureSession(std::bitset<kSecureMax> *secure_sessions) { |
| if (!secure_sessions) { |
| return -1; |
| } |
| secure_sessions->reset(); |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| if (layer->input_buffer.flags.secure_camera) { |
| secure_sessions->set(kSecureCamera); |
| } |
| if (layer->input_buffer.flags.secure_display) { |
| secure_sessions->set(kSecureDisplay); |
| } |
| } |
| if (secure_event_ == kTUITransitionStart || secure_event_ == kTUITransitionPrepare) { |
| secure_sessions->set(kSecureTUI); |
| } |
| return 0; |
| } |
| |
| int HWCDisplayBuiltIn::HandleSecureSession(const std::bitset<kSecureMax> &secure_sessions, |
| bool *power_on_pending, bool is_active_secure_display) { |
| if (!power_on_pending) { |
| return -EINVAL; |
| } |
| |
| if (!is_active_secure_display) { |
| // Do handling as done on non-primary displays. |
| DLOGI("Default handling for display %" PRIu64 " %d-%d", id_, sdm_id_, type_); |
| return HWCDisplay::HandleSecureSession(secure_sessions, power_on_pending, |
| is_active_secure_display); |
| } |
| |
| if (current_power_mode_ != HWC2::PowerMode::On) { |
| return 0; |
| } |
| |
| if (active_secure_sessions_[kSecureDisplay] != secure_sessions[kSecureDisplay]) { |
| SecureEvent secure_event = |
| secure_sessions.test(kSecureDisplay) ? kSecureDisplayStart : kSecureDisplayEnd; |
| bool needs_refresh = false; |
| DisplayError err = display_intf_->HandleSecureEvent(secure_event, &needs_refresh); |
| if (err != kErrorNone) { |
| DLOGE("Set secure event failed"); |
| return err; |
| } |
| |
| DLOGI("SecureDisplay state changed from %d to %d for display %" PRIu64 " %d-%d", |
| active_secure_sessions_.test(kSecureDisplay), secure_sessions.test(kSecureDisplay), |
| id_, sdm_id_, type_); |
| } |
| active_secure_sessions_ = secure_sessions; |
| *power_on_pending = false; |
| return 0; |
| } |
| |
| void HWCDisplayBuiltIn::ForceRefreshRate(uint32_t refresh_rate) { |
| if ((refresh_rate && (refresh_rate < min_refresh_rate_ || refresh_rate > max_refresh_rate_)) || |
| layer_stack_.force_refresh_rate == refresh_rate) { |
| // Cannot honor force refresh rate, as its beyond the range or new request is same |
| return; |
| } |
| |
| layer_stack_.force_refresh_rate = refresh_rate; |
| |
| callbacks_->Refresh(id_); |
| |
| return; |
| } |
| |
| void HWCDisplayBuiltIn::SetIdleTimeoutMs(uint32_t timeout_ms, uint32_t inactive_ms) { |
| display_intf_->SetIdleTimeoutMs(timeout_ms, inactive_ms); |
| } |
| |
| void HWCDisplayBuiltIn::HandleFrameCapture() { |
| auto ret = kCWBReleaseFenceErrorNone; |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| auto &cwb_resp = cwb_capture_status_map_[kCWBClientColor]; |
| // If CWB request status is not notified, then need to wait for the notification. |
| if (cwb_resp.status == kCWBReleaseFenceNotChecked) { |
| cwb_cv_.wait(lock); |
| } |
| ret = cwb_resp.status; |
| } |
| |
| frame_capture_status_ = (ret == kCWBReleaseFenceWaitTimedOut) ? -ETIME : (ret) ? -1 : 0; |
| frame_capture_buffer_queued_ = false; |
| |
| DLOGV_IF(kTagQDCM, "Frame captured: frame_capture_buffer_queued_ %d",frame_capture_buffer_queued_); |
| } |
| |
| int HWCDisplayBuiltIn::FrameCaptureAsync(const BufferInfo &output_buffer_info, |
| const CwbConfig &cwb_config) { |
| // Note: This function is called in context of a binder thread and a lock is already held |
| if (output_buffer_info.alloc_buffer_info.fd < 0) { |
| DLOGE("Invalid fd %d", output_buffer_info.alloc_buffer_info.fd); |
| return -1; |
| } |
| |
| if (cwb_config.tap_point < CwbTapPoint::kLmTapPoint || |
| cwb_config.tap_point > CwbTapPoint::kDemuraTapPoint) { |
| DLOGE("Invalid CWB tappoint passed by client "); |
| return -1; |
| } |
| |
| const native_handle_t *buffer = static_cast<native_handle_t *>(output_buffer_info.private_data); |
| HWC2::Error err = SetReadbackBuffer(buffer, nullptr, cwb_config, kCWBClientColor); |
| if (err != HWC2::Error::None) { |
| return -1; |
| } |
| frame_capture_buffer_queued_ = true; |
| frame_capture_status_ = -EAGAIN; |
| |
| return 0; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetDetailEnhancerConfig |
| (const DisplayDetailEnhancerData &de_data) { |
| DisplayError error = kErrorNotSupported; |
| |
| if (display_intf_) { |
| error = display_intf_->SetDetailEnhancerData(de_data); |
| } |
| return error; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetHWDetailedEnhancerConfig(void *params) { |
| DisplayError err = kErrorNone; |
| DisplayDetailEnhancerData de_data; |
| |
| PPDETuningCfgData *de_tuning_cfg_data = reinterpret_cast<PPDETuningCfgData*>(params); |
| if (de_tuning_cfg_data->cfg_pending) { |
| if (!de_tuning_cfg_data->cfg_en) { |
| de_data.enable = 0; |
| DLOGV_IF(kTagQDCM, "Disable DE config"); |
| } else { |
| de_data.override_flags = kOverrideDEEnable; |
| de_data.enable = 1; |
| #ifdef DISP_DE_LPF_BLEND |
| DLOGV_IF(kTagQDCM, "Enable DE: flags %u, sharp_factor %d, thr_quiet %d, thr_dieout %d, " |
| "thr_low %d, thr_high %d, clip %d, quality %d, content_type %d, de_blend %d, " |
| "de_lpf_h %d, de_lpf_m %d, de_lpf_l %d", |
| de_tuning_cfg_data->params.flags, de_tuning_cfg_data->params.sharp_factor, |
| de_tuning_cfg_data->params.thr_quiet, de_tuning_cfg_data->params.thr_dieout, |
| de_tuning_cfg_data->params.thr_low, de_tuning_cfg_data->params.thr_high, |
| de_tuning_cfg_data->params.clip, de_tuning_cfg_data->params.quality, |
| de_tuning_cfg_data->params.content_type, de_tuning_cfg_data->params.de_blend, |
| de_tuning_cfg_data->params.de_lpf_h, de_tuning_cfg_data->params.de_lpf_m, |
| de_tuning_cfg_data->params.de_lpf_l); |
| #endif |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagSharpFactor) { |
| de_data.override_flags |= kOverrideDESharpen1; |
| de_data.sharp_factor = de_tuning_cfg_data->params.sharp_factor; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagClip) { |
| de_data.override_flags |= kOverrideDEClip; |
| de_data.clip = de_tuning_cfg_data->params.clip; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagThrQuiet) { |
| de_data.override_flags |= kOverrideDEThrQuiet; |
| de_data.thr_quiet = de_tuning_cfg_data->params.thr_quiet; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagThrDieout) { |
| de_data.override_flags |= kOverrideDEThrDieout; |
| de_data.thr_dieout = de_tuning_cfg_data->params.thr_dieout; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagThrLow) { |
| de_data.override_flags |= kOverrideDEThrLow; |
| de_data.thr_low = de_tuning_cfg_data->params.thr_low; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagThrHigh) { |
| de_data.override_flags |= kOverrideDEThrHigh; |
| de_data.thr_high = de_tuning_cfg_data->params.thr_high; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagContentQualLevel) { |
| switch (de_tuning_cfg_data->params.quality) { |
| case kDeContentQualLow: |
| de_data.quality_level = kContentQualityLow; |
| break; |
| case kDeContentQualMedium: |
| de_data.quality_level = kContentQualityMedium; |
| break; |
| case kDeContentQualHigh: |
| de_data.quality_level = kContentQualityHigh; |
| break; |
| case kDeContentQualUnknown: |
| default: |
| de_data.quality_level = kContentQualityUnknown; |
| break; |
| } |
| } |
| |
| switch (de_tuning_cfg_data->params.content_type) { |
| case kDeContentTypeVideo: |
| de_data.content_type = kContentTypeVideo; |
| break; |
| case kDeContentTypeGraphics: |
| de_data.content_type = kContentTypeGraphics; |
| break; |
| case kDeContentTypeUnknown: |
| default: |
| de_data.content_type = kContentTypeUnknown; |
| break; |
| } |
| |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagDeBlend) { |
| de_data.override_flags |= kOverrideDEBlend; |
| de_data.de_blend = de_tuning_cfg_data->params.de_blend; |
| } |
| #ifdef DISP_DE_LPF_BLEND |
| if (de_tuning_cfg_data->params.flags & kDeTuningFlagDeLpfBlend) { |
| de_data.override_flags |= kOverrideDELpfBlend; |
| de_data.de_lpf_en = true; |
| de_data.de_lpf_h = de_tuning_cfg_data->params.de_lpf_h; |
| de_data.de_lpf_m = de_tuning_cfg_data->params.de_lpf_m; |
| de_data.de_lpf_l = de_tuning_cfg_data->params.de_lpf_l; |
| } |
| #endif |
| } |
| err = SetDetailEnhancerConfig(de_data); |
| if (err) { |
| DLOGW("SetDetailEnhancerConfig failed. err = %d", err); |
| } |
| de_tuning_cfg_data->cfg_pending = false; |
| } |
| return err; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::ControlPartialUpdate(bool enable, uint32_t *pending) { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->ControlPartialUpdate(enable, pending); |
| } |
| |
| return error; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::DisablePartialUpdateOneFrame() { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->DisablePartialUpdateOneFrame(); |
| } |
| |
| return error; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDisplayedContentSamplingEnabledVndService(bool enabled) { |
| std::unique_lock<decltype(sampling_mutex)> lk(sampling_mutex); |
| vndservice_sampling_vote = enabled; |
| if (api_sampling_vote || vndservice_sampling_vote) { |
| histogram.start(); |
| display_intf_->colorSamplingOn(); |
| } else { |
| display_intf_->colorSamplingOff(); |
| histogram.stop(); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDisplayedContentSamplingEnabled(int32_t enabled, |
| uint8_t component_mask, |
| uint64_t max_frames) { |
| if ((enabled != HWC2_DISPLAYED_CONTENT_SAMPLING_ENABLE) && |
| (enabled != HWC2_DISPLAYED_CONTENT_SAMPLING_DISABLE)) |
| return HWC2::Error::BadParameter; |
| |
| std::unique_lock<decltype(sampling_mutex)> lk(sampling_mutex); |
| if (enabled == HWC2_DISPLAYED_CONTENT_SAMPLING_ENABLE) { |
| api_sampling_vote = true; |
| } else { |
| api_sampling_vote = false; |
| } |
| |
| auto start = api_sampling_vote || vndservice_sampling_vote; |
| if (start && max_frames == 0) { |
| histogram.start(); |
| display_intf_->colorSamplingOn(); |
| } else if (start) { |
| histogram.start(max_frames); |
| display_intf_->colorSamplingOn(); |
| } else { |
| display_intf_->colorSamplingOff(); |
| histogram.stop(); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetDisplayedContentSamplingAttributes( |
| int32_t *format, int32_t *dataspace, uint8_t *supported_components) { |
| return histogram.getAttributes(format, dataspace, supported_components); |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetDisplayedContentSample( |
| uint64_t max_frames, uint64_t timestamp, uint64_t *numFrames, |
| int32_t samples_size[NUM_HISTOGRAM_COLOR_COMPONENTS], |
| uint64_t *samples[NUM_HISTOGRAM_COLOR_COMPONENTS]) { |
| histogram.collect(max_frames, timestamp, samples_size, samples, numFrames); |
| return HWC2::Error::None; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetMixerResolution(uint32_t width, uint32_t height) { |
| DisplayError error = display_intf_->SetMixerResolution(width, height); |
| callbacks_->Refresh(id_); |
| return error; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::GetMixerResolution(uint32_t *width, uint32_t *height) { |
| return display_intf_->GetMixerResolution(width, height); |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetQSyncMode(QSyncMode qsync_mode) { |
| // Client needs to ensure that config change and qsync mode change |
| // are not triggered in the same drawcycle. |
| if (pending_config_) { |
| DLOGE("Failed to set qsync mode. Pending active config transition"); |
| return HWC2::Error::Unsupported; |
| } |
| |
| auto err = display_intf_->SetQSyncMode(qsync_mode); |
| if (err != kErrorNone) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::ControlIdlePowerCollapse(bool enable, bool synchronous) { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->ControlIdlePowerCollapse(enable, synchronous); |
| } |
| return error; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetJitterConfig(uint32_t jitter_type, float value, uint32_t time) { |
| DisplayError error = display_intf_->SetJitterConfig(jitter_type, value, time); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set jitter configuration."); |
| return error; |
| } |
| |
| callbacks_->Refresh(id_); |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::SetDynamicDSIClock(uint64_t bitclk) { |
| DisablePartialUpdateOneFrame(); |
| DisplayError error = display_intf_->SetDynamicDSIClock(bitclk); |
| if (error != kErrorNone) { |
| DLOGE(" failed: Clk: %" PRIu64 " Error: %d", bitclk, error); |
| return error; |
| } |
| |
| callbacks_->Refresh(id_); |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::GetDynamicDSIClock(uint64_t *bitclk) { |
| if (display_intf_) { |
| return display_intf_->GetDynamicDSIClock(bitclk); |
| } |
| |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::GetSupportedDSIClock(std::vector<uint64_t> *bitclk_rates) { |
| if (display_intf_) { |
| return display_intf_->GetSupportedDSIClock(bitclk_rates); |
| } |
| |
| return kErrorNotSupported; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::UpdateDisplayId(hwc2_display_t id) { |
| id_ = id; |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetPendingRefresh() { |
| pending_refresh_ = true; |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetPanelBrightness(float brightness) { |
| DisplayError ret = display_intf_->SetPanelBrightness(brightness); |
| if (ret != kErrorNone) { |
| return HWC2::Error::NoResources; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetPanelBrightness(float *brightness) { |
| DisplayError ret = display_intf_->GetPanelBrightness(brightness); |
| if (ret != kErrorNone) { |
| return HWC2::Error::NoResources; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::GetPanelMaxBrightness(uint32_t *max_brightness_level) { |
| DisplayError ret = display_intf_->GetPanelMaxBrightness(max_brightness_level); |
| if (ret != kErrorNone) { |
| return HWC2::Error::NoResources; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetBLScale(uint32_t level) { |
| DisplayError ret = display_intf_->SetBLScale(level); |
| if (ret != kErrorNone) { |
| return HWC2::Error::NoResources; |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::UpdatePowerMode(HWC2::PowerMode mode) { |
| current_power_mode_ = mode; |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetClientTarget(buffer_handle_t target, |
| shared_ptr<Fence> acquire_fence, |
| int32_t dataspace, hwc_region_t damage) { |
| DTRACE_SCOPED(); |
| HWC2::Error error = HWCDisplay::SetClientTarget(target, acquire_fence, dataspace, damage); |
| if (error != HWC2::Error::None) { |
| return error; |
| } |
| |
| // windowed_display and dynamic scaling are not supported. |
| if (windowed_display_) { |
| return HWC2::Error::None; |
| } |
| |
| Layer *sdm_layer = client_target_->GetSDMLayer(); |
| uint32_t fb_width = 0, fb_height = 0; |
| |
| GetFrameBufferResolution(&fb_width, &fb_height); |
| |
| if (fb_width != sdm_layer->input_buffer.unaligned_width || |
| fb_height != sdm_layer->input_buffer.unaligned_height) { |
| if (SetFrameBufferConfig(sdm_layer->input_buffer.unaligned_width, |
| sdm_layer->input_buffer.unaligned_height)) { |
| return HWC2::Error::BadParameter; |
| } |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| DisplayError HWCDisplayBuiltIn::UpdateTransferTime(uint32_t transfer_time) { |
| DisplayError error = display_intf_->UpdateTransferTime(transfer_time); |
| if (error != kErrorNone) { |
| DLOGE(" failed: Transfer time: %" PRIu32 " Error: %d", transfer_time, error); |
| return error; |
| } |
| return kErrorNone; |
| } |
| |
| bool HWCDisplayBuiltIn::IsSmartPanelConfig(uint32_t config_id) { |
| if (config_id < hwc_config_map_.size()) { |
| uint32_t index = hwc_config_map_.at(config_id); |
| return variable_config_map_.at(index).smart_panel; |
| } |
| |
| return false; |
| } |
| |
| bool HWCDisplayBuiltIn::HasSmartPanelConfig(void) { |
| if (!enable_poms_during_doze_) { |
| uint32_t config = 0; |
| GetActiveDisplayConfig(&config); |
| return IsSmartPanelConfig(config); |
| } |
| |
| for (auto &config : variable_config_map_) { |
| if (config.second.smart_panel) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| int HWCDisplayBuiltIn::Deinit() { |
| // Destory color convert instance. This destroys thread and underlying GL resources. |
| if (gl_layer_stitch_) { |
| layer_stitch_task_.PerformTask(LayerStitchTaskCode::kCodeDestroyInstance, nullptr); |
| } |
| |
| histogram.stop(); |
| return HWCDisplay::Deinit(); |
| } |
| |
| void HWCDisplayBuiltIn::OnTask(const LayerStitchTaskCode &task_code, |
| SyncTask<LayerStitchTaskCode>::TaskContext *task_context) { |
| switch (task_code) { |
| case LayerStitchTaskCode::kCodeGetInstance: { |
| gl_layer_stitch_ = GLLayerStitch::GetInstance(false /* Non-secure */); |
| } |
| break; |
| case LayerStitchTaskCode::kCodeStitch: { |
| DTRACE_SCOPED(); |
| LayerStitchContext* ctx = reinterpret_cast<LayerStitchContext*>(task_context); |
| gl_layer_stitch_->Blit(ctx->stitch_params, &(ctx->release_fence)); |
| } |
| break; |
| case LayerStitchTaskCode::kCodeDestroyInstance: { |
| if (gl_layer_stitch_) { |
| GLLayerStitch::Destroy(gl_layer_stitch_); |
| } |
| } |
| break; |
| } |
| } |
| |
| bool HWCDisplayBuiltIn::InitLayerStitch() { |
| if (!is_primary_) { |
| // Disable on all non-primary builtins. |
| DLOGI("Non-primary builtin."); |
| disable_layer_stitch_ = true; |
| return true; |
| } |
| |
| // Disable by default. |
| int value = 1; |
| Debug::Get()->GetProperty(DISABLE_LAYER_STITCH, &value); |
| disable_layer_stitch_ = (value == 1); |
| |
| if (disable_layer_stitch_) { |
| DLOGI("Layer Stitch Disabled !!!"); |
| return true; |
| } |
| |
| // Initialize stitch context. This will be non-secure. |
| layer_stitch_task_.PerformTask(LayerStitchTaskCode::kCodeGetInstance, nullptr); |
| if (gl_layer_stitch_ == nullptr) { |
| DLOGE("Failed to get LayerStitch Instance"); |
| return false; |
| } |
| |
| if (!AllocateStitchBuffer()) { |
| return true; |
| } |
| |
| stitch_target_ = new HWCLayer(id_, static_cast<HWCBufferAllocator *>(buffer_allocator_)); |
| |
| // Populate buffer params and pvt handle. |
| InitStitchTarget(); |
| |
| DLOGI("Created LayerStitch instance: %p", gl_layer_stitch_); |
| |
| return true; |
| } |
| |
| bool HWCDisplayBuiltIn::AllocateStitchBuffer() { |
| // Buffer dimensions: FB width * (1.5 * height) |
| DTRACE_SCOPED(); |
| |
| DisplayError error = display_intf_->GetFrameBufferConfig(&fb_config_); |
| if (error != kErrorNone) { |
| DLOGE("Get frame buffer config failed. Error = %d", error); |
| return false; |
| } |
| |
| BufferConfig &config = buffer_info_.buffer_config; |
| config.width = fb_config_.x_pixels; |
| config.height = fb_config_.y_pixels * kBufferHeightFactor; |
| |
| // By default UBWC is enabled and below property is global enable/disable for all |
| // buffers allocated through gralloc , including framebuffer targets. |
| int ubwc_disabled = 0; |
| HWCDebugHandler::Get()->GetProperty(DISABLE_UBWC_PROP, &ubwc_disabled); |
| config.format = ubwc_disabled ? kFormatRGBA8888 : kFormatRGBA8888Ubwc; |
| |
| config.gfx_client = true; |
| |
| // Populate default params. |
| config.secure = false; |
| config.cache = false; |
| config.secure_camera = false; |
| |
| int err = buffer_allocator_->AllocateBuffer(&buffer_info_); |
| |
| if (err != 0) { |
| DLOGE("Failed to allocate buffer. Error: %d", error); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void HWCDisplayBuiltIn::InitStitchTarget() { |
| LayerBuffer buffer = {}; |
| buffer.planes[0].fd = buffer_info_.alloc_buffer_info.fd; |
| buffer.planes[0].offset = 0; |
| buffer.planes[0].stride = buffer_info_.alloc_buffer_info.stride; |
| buffer.size = buffer_info_.alloc_buffer_info.size; |
| buffer.handle_id = buffer_info_.alloc_buffer_info.id; |
| buffer.width = buffer_info_.alloc_buffer_info.aligned_width; |
| buffer.height = buffer_info_.alloc_buffer_info.aligned_height; |
| buffer.unaligned_width = fb_config_.x_pixels; |
| buffer.unaligned_height = fb_config_.y_pixels * kBufferHeightFactor; |
| buffer.format = buffer_info_.alloc_buffer_info.format; |
| |
| Layer *sdm_stitch_target = stitch_target_->GetSDMLayer(); |
| sdm_stitch_target->composition = kCompositionStitchTarget; |
| sdm_stitch_target->input_buffer = buffer; |
| sdm_stitch_target->input_buffer.buffer_id = reinterpret_cast<uint64_t>(buffer_info_.private_data); |
| } |
| |
| void HWCDisplayBuiltIn::AppendStitchLayer() { |
| if (disable_layer_stitch_) { |
| return; |
| } |
| |
| // Append stitch target buffer to layer stack. |
| Layer *sdm_stitch_target = stitch_target_->GetSDMLayer(); |
| sdm_stitch_target->composition = kCompositionStitchTarget; |
| sdm_stitch_target->dst_rect = {0, 0, FLOAT(fb_config_.x_pixels), FLOAT(fb_config_.y_pixels)}; |
| sdm_stitch_target->layer_id = stitch_target_->GetId(); |
| sdm_stitch_target->geometry_changes = stitch_target_->GetGeometryChanges(); |
| layer_stack_.layers.push_back(sdm_stitch_target); |
| } |
| |
| DisplayError HWCDisplayBuiltIn::HistogramEvent(int fd, uint32_t blob_id) { |
| histogram.notify_histogram_event(fd, blob_id); |
| return kErrorNone; |
| } |
| |
| int HWCDisplayBuiltIn::PostInit() { |
| auto status = InitLayerStitch(); |
| if (!status) { |
| DLOGW("Failed to initialize Layer Stitch context"); |
| // Disable layer stitch. |
| disable_layer_stitch_ = true; |
| } |
| |
| return 0; |
| } |
| |
| bool HWCDisplayBuiltIn::NeedsLargeCompPerfHint() { |
| if (!cpu_hint_) { |
| DLOGV_IF(kTagResources, "CPU hint is not initialized"); |
| return false; |
| } |
| |
| if (active_refresh_rate_ < 120) { |
| return false; |
| } |
| |
| // Send hints when the device is in multi-display or when a skip layer is present. |
| if (layer_stack_.flags.skip_present || is_multi_display_) { |
| DLOGV_IF(kTagResources, "Found skip_layer:%d or is_multidisplay:%d. Set perf hint for large " |
| "comp cycle", layer_stack_.flags.skip_present, is_multi_display_); |
| return true; |
| } |
| |
| int gpu_layer_count = 0; |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| if (layer->composition == kCompositionGPU) { |
| gpu_layer_count++; |
| } |
| } |
| |
| // Return immediately if full MDP comp is in use |
| if (!gpu_layer_count) { |
| return false; |
| } |
| |
| auto it = mixed_mode_threshold_.find(active_refresh_rate_);; |
| if (it != mixed_mode_threshold_.end()) { |
| if (gpu_layer_count < it->second) { |
| DLOGV_IF(kTagResources, "Number of GPU layers :%d does not meet mixed mode perf hints " |
| "threshold:%d for %d fps", gpu_layer_count, it->second, active_refresh_rate_); |
| return false; |
| } |
| } else { |
| DLOGV_IF(kTagResources, "Mixed mode perf hints is not supported for %d fps", |
| active_refresh_rate_); |
| return false; |
| } |
| |
| // Send hints when the number of GPU layers reaches the threshold for the active refresh rate. |
| DLOGV_IF(kTagResources, "Reached max GPU layers for %dfps. Set perf hint for large comp cycle", |
| active_refresh_rate_); |
| return true; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::PostCommitLayerStack(shared_ptr<Fence> *out_retire_fence) { |
| DTRACE_SCOPED(); |
| HandleFrameOutput(); |
| PostCommitStitchLayers(); |
| |
| if (flush_ && layer_stack_.output_buffer == nullptr) { |
| display_intf_->FlushConcurrentWriteback(); |
| } |
| |
| auto status = HWCDisplay::PostCommitLayerStack(out_retire_fence); |
| /* display_intf_->GetConfig(&fixed_info); |
| is_cmd_mode_ = fixed_info.is_cmdmode; |
| |
| // For video mode panel with dynamic fps, update the active mode index. |
| // This is needed to report the correct Vsync period when client queries |
| // using GetDisplayVsyncPeriod API. |
| if (!is_cmd_mode_ && !disable_dyn_fps_) { |
| hwc2_config_t active_config = hwc_config_map_.at(0); |
| GetActiveConfig(&active_config); |
| SetActiveConfigIndex(active_config); |
| }*/ |
| |
| pending_commit_ = false; |
| |
| if (layer_stack_.request_flags.trigger_refresh) { |
| callbacks_->Refresh(id_); |
| } |
| |
| return status; |
| } |
| |
| bool HWCDisplayBuiltIn::IsDisplayIdle() { |
| // Notify only if this display is source of vsync. |
| bool vsync_source = (callbacks_->GetVsyncSource() == id_); |
| return vsync_source && display_idle_; |
| } |
| |
| bool HWCDisplayBuiltIn::HasReadBackBufferSupport() { |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| |
| return fixed_info.readback_supported; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::NotifyDisplayCalibrationMode(bool in_calibration) { |
| auto status = color_mode_->NotifyDisplayCalibrationMode(in_calibration); |
| if (status != HWC2::Error::None) { |
| DLOGE("Failed for notify QDCM mode = %d", in_calibration); |
| return status; |
| } |
| |
| return status; |
| } |
| |
| uint32_t HWCDisplayBuiltIn::GetUpdatingAppLayersCount() { |
| uint32_t updating_count = 0; |
| |
| for (uint i = 0; i < layer_stack_.layers.size(); i++) { |
| auto layer = layer_stack_.layers.at(i); |
| if (layer->composition == kCompositionGPUTarget) { |
| break; |
| } |
| if (layer->flags.updating) { |
| updating_count++; |
| } |
| } |
| |
| return updating_count; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::CommitOrPrepare(bool validate_only, |
| shared_ptr<Fence> *out_retire_fence, |
| uint32_t *out_num_types, |
| uint32_t *out_num_requests, bool *needs_commit) { |
| DTRACE_SCOPED(); |
| |
| auto status = HWCDisplay::CommitOrPrepare(validate_only, out_retire_fence, out_num_types, |
| out_num_requests, needs_commit); |
| |
| if (perf_hint_large_comp_cycle_) { |
| bool needs_hint = NeedsLargeCompPerfHint(); |
| HandleLargeCompositionHint(!needs_hint); |
| } |
| |
| return status; |
| } |
| |
| void HWCDisplayBuiltIn::LoadMixedModePerfHintThreshold() { |
| // For mixed mode composition, if perf hint for large composition cycles is enabled and if the |
| // use case meets the threshold, SF and HWC will be running on the gold CPU cores. |
| |
| // For 120 fps, 8 layers should fall back to GPU |
| mixed_mode_threshold_.insert(std::make_pair<int32_t, int32_t>(120, 8)); |
| |
| // For 144 fps, 6 layers should fall back to GPU |
| mixed_mode_threshold_.insert(std::make_pair<int32_t, int32_t>(144, 6)); |
| |
| // TODO(user): Profile performance on 180 and 240 Hz without maxing out the CPU cores |
| // For 180 fps, 8 layers should fall back to GPU |
| mixed_mode_threshold_.insert(std::make_pair<int32_t, int32_t>(180, 8)); |
| |
| // For 240 fps, 4 layers should fall back to GPU |
| mixed_mode_threshold_.insert(std::make_pair<int32_t, int32_t>(240, 4)); |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetAlternateDisplayConfig(bool set) { |
| hwc2_config_t alt_config = 0; |
| DisplayError error = kErrorNone; |
| |
| // return early if non-DSC mode is already set |
| if (set && alternate_config_ != -1) { |
| return HWC2::Error::None; |
| } |
| |
| if (!set && alternate_config_ == -1) { |
| return HWC2::Error::None; |
| } |
| |
| error = display_intf_->SetAlternateDisplayConfig(&alt_config); |
| if (error != kErrorNone) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| auto status = SetActiveConfig(alt_config); |
| if (set && status == HWC2::Error::None) { |
| alternate_config_ = alt_config; |
| } |
| |
| if (!set) { // set alternate config to -1 on reset call |
| alternate_config_ = -1; |
| } |
| |
| // Trigger refresh. This config gets applied on next commit. |
| callbacks_->Refresh(id_); |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDimmingEnable(int int_enabled) { |
| DLOGV("Display ID: %" PRId64 " enabled: %d", id_, int_enabled); |
| DisplayError error = display_intf_->SetDimmingEnable(int_enabled); |
| |
| if (error != kErrorNone) { |
| DLOGE("Failed. enabled = %d, error = %d", int_enabled, error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDimmingMinBl(int min_bl) { |
| DLOGV("Display ID: %" PRId64 " min_bl: %d", id_, min_bl); |
| DisplayError error = display_intf_->SetDimmingMinBl(min_bl); |
| |
| if (error != kErrorNone) { |
| DLOGE("Failed. min_bl = %d, error = %d", min_bl, error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::RetrieveDemuraTnFiles() { |
| DLOGV("Display ID: %" PRId64, id_); |
| DisplayError error = display_intf_->RetrieveDemuraTnFiles(); |
| |
| if (error != kErrorNone) { |
| DLOGE("Failed. error = %d",error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplayBuiltIn::SetDemuraState(int state) { |
| DLOGV("Display ID: %" PRId64 " state: %d", id_, state); |
| DisplayError error = display_intf_->SetDemuraState(state); |
| |
| if (error != kErrorNone) { |
| DLOGE("Failed. state = %d, error = %d", state, error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| callbacks_->Refresh(id_); |
| |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplayBuiltIn::HandleLargeCompositionHint(bool release) { |
| if (!cpu_hint_) { |
| return; |
| } |
| |
| int tid = gettid(); |
| |
| if (release) { |
| if (hwc_tid_ != tid) { |
| DLOGV_IF(kTagResources, "HWC's tid:%d is updated to :%d", hwc_tid_, tid); |
| int ret = cpu_hint_->ReqHint(kHWC, tid); |
| if (!ret) { |
| hwc_tid_ = tid; |
| } |
| } |
| |
| // For long term large composition hint, release the acquired handle after a consecutive number |
| // of basic frames to avoid resending hints in animation launch use cases and others. |
| num_basic_frames_++; |
| |
| if (num_basic_frames_ >= active_refresh_rate_) { |
| cpu_hint_->ReqHintRelease(); |
| } |
| return; |
| } |
| |
| if (hwc_tid_ != tid) { |
| DLOGV_IF(kTagResources, "HWC's tid:%d is updated to :%d", hwc_tid_, tid); |
| cpu_hint_->ReqHintsOffload(kPerfHintLargeCompCycle, tid); |
| hwc_tid_ = tid; |
| } else { |
| // Sending tid as 0 indicates to Perf HAL that HWC's tid is unchanged for the current frame |
| cpu_hint_->ReqHintsOffload(kPerfHintLargeCompCycle, 0); |
| } |
| |
| num_basic_frames_ = 0; |
| } |
| |
| void HWCDisplayBuiltIn::ReqPerfHintRelease() { |
| if (!cpu_hint_) { |
| return; |
| } |
| cpu_hint_->ReqHintRelease(); |
| } |
| |
| } // namespace sdm |