| /* |
| * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dlfcn.h> |
| #include "overlay.h" |
| #include "pipes/overlayGenPipe.h" |
| #include "mdp_version.h" |
| #include "qdMetaData.h" |
| #include "qd_utils.h" |
| |
| namespace overlay { |
| using namespace utils; |
| using namespace qdutils; |
| |
| Overlay::Overlay() { |
| int numPipes = qdutils::MDPVersion::getInstance().getTotalPipes(); |
| PipeBook::NUM_PIPES = (numPipes <= utils::OV_MAX)? numPipes : utils::OV_MAX; |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| mPipeBook[i].init(); |
| } |
| |
| initScalar(); |
| setDMAMultiplexingSupported(); |
| #ifdef USES_POST_PROCESSING |
| initPostProc(); |
| #endif |
| } |
| |
| Overlay::~Overlay() { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| mPipeBook[i].destroy(); |
| } |
| destroyScalar(); |
| #ifdef USES_POST_PROCESSING |
| destroyPostProc(); |
| #endif |
| } |
| |
| void Overlay::configBegin() { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| //Mark as available for this round. |
| PipeBook::resetUse(i); |
| PipeBook::resetAllocation(i); |
| } |
| } |
| |
| void Overlay::configDone() { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if((PipeBook::isNotUsed(i) && !sessionInProgress((eDest)i)) || |
| isSessionEnded((eDest)i)) { |
| //Forces UNSET on pipes, flushes rotator memory and session, closes |
| //fds |
| mPipeBook[i].destroy(); |
| } |
| } |
| PipeBook::save(); |
| } |
| |
| int Overlay::getPipeId(utils::eDest dest) { |
| return mPipeBook[(int)dest].mPipe->getPipeId(); |
| } |
| |
| eDest Overlay::getDest(int pipeid) { |
| eDest dest = OV_INVALID; |
| // finding the dest corresponding to the given pipe |
| for(int i=0; i < PipeBook::NUM_PIPES; ++i) { |
| if(mPipeBook[i].valid() && mPipeBook[i].mPipe->getPipeId() == pipeid) { |
| return (eDest)i; |
| } |
| } |
| return dest; |
| } |
| |
| eDest Overlay::reservePipe(int pipeid) { |
| eDest dest = getDest(pipeid); |
| PipeBook::setAllocation((int)dest); |
| return dest; |
| } |
| |
| eDest Overlay::nextPipe(eMdpPipeType type, const PipeSpecs& pipeSpecs) { |
| eDest dest = OV_INVALID; |
| int dpy = pipeSpecs.dpy; |
| int mixer = pipeSpecs.mixer; |
| int formatType = pipeSpecs.formatClass; |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if( (type == OV_MDP_PIPE_ANY || //Pipe type match |
| type == PipeBook::getPipeType((eDest)i)) && |
| (mPipeBook[i].mDisplay == DPY_UNUSED || //Free or same display |
| mPipeBook[i].mDisplay == dpy) && |
| (mPipeBook[i].mMixer == MIXER_UNUSED || //Free or same mixer |
| mPipeBook[i].mMixer == mixer) && |
| (mPipeBook[i].mFormatType == FORMAT_NONE || //Free or same format |
| mPipeBook[i].mFormatType == formatType) && |
| PipeBook::isNotAllocated(i) && //Free pipe |
| ( (sDMAMultiplexingSupported && dpy) || |
| !(sDMAMode == DMA_BLOCK_MODE && //DMA pipe in Line mode |
| PipeBook::getPipeType((eDest)i) == OV_MDP_PIPE_DMA)) ){ |
| //DMA-Multiplexing is only supported for WB on 8x26 |
| dest = (eDest)i; |
| PipeBook::setAllocation(i); |
| break; |
| } |
| } |
| |
| if(dest != OV_INVALID) { |
| int index = (int)dest; |
| mPipeBook[index].mDisplay = dpy; |
| mPipeBook[index].mMixer = mixer; |
| mPipeBook[index].mFormatType = formatType; |
| if(not mPipeBook[index].valid()) { |
| mPipeBook[index].mPipe = new GenericPipe(dpy); |
| mPipeBook[index].mSession = PipeBook::NONE; |
| } |
| } |
| |
| return dest; |
| } |
| |
| utils::eDest Overlay::getPipe(const PipeSpecs& pipeSpecs) { |
| if(MDPVersion::getInstance().is8x26()) { |
| return getPipe_8x26(pipeSpecs); |
| } else if(MDPVersion::getInstance().is8x16()) { |
| return getPipe_8x16(pipeSpecs); |
| } else if(MDPVersion::getInstance().is8x39()) { |
| return getPipe_8x39(pipeSpecs); |
| } else if(MDPVersion::getInstance().is8994()) { |
| return getPipe_8994(pipeSpecs); |
| } else if(MDPVersion::getInstance().is8992()) { |
| return getPipe_8992(pipeSpecs); |
| } |
| |
| eDest dest = OV_INVALID; |
| |
| //The default behavior is to assume RGB and VG pipes have scalars |
| if(pipeSpecs.formatClass == FORMAT_YUV) { |
| return nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } else if(pipeSpecs.fb == false) { //RGB App layers |
| if(not pipeSpecs.needsScaling) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| } |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| } else { //FB layer |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| //Some features can cause FB to have scaling as well. |
| //If we ever come to this block with FB needing scaling, |
| //the screen will be black for a frame, since the FB won't get a pipe |
| //but atleast this will prevent a hang |
| if(dest == OV_INVALID and (not pipeSpecs.needsScaling)) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| } |
| return dest; |
| } |
| |
| utils::eDest Overlay::getPipe_8x26(const PipeSpecs& pipeSpecs) { |
| //Use this to hide all the 8x26 requirements that cannot be humanly |
| //described in a generic way |
| eDest dest = OV_INVALID; |
| if(pipeSpecs.formatClass == FORMAT_YUV) { //video |
| return nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } else if(pipeSpecs.fb == false) { //RGB app layers |
| if((not pipeSpecs.needsScaling) and |
| (not (pipeSpecs.numActiveDisplays > 1 && |
| pipeSpecs.dpy == DPY_PRIMARY))) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| } |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| } else { //FB layer |
| //For 8x26 Secondary we use DMA always for FB for inline rotation |
| if(pipeSpecs.dpy == DPY_PRIMARY) { |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| } |
| if(dest == OV_INVALID and (not pipeSpecs.needsScaling) and |
| (not (pipeSpecs.numActiveDisplays > 1 && |
| pipeSpecs.dpy == DPY_PRIMARY))) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| } |
| return dest; |
| } |
| |
| utils::eDest Overlay::getPipe_8x16(const PipeSpecs& pipeSpecs) { |
| //Having such functions help keeping the interface generic but code specific |
| //and rife with assumptions |
| eDest dest = OV_INVALID; |
| if(pipeSpecs.formatClass == FORMAT_YUV or pipeSpecs.needsScaling) { |
| return nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } else { |
| //Since this is a specific func, we can assume stuff like RGB pipe not |
| //having scalar blocks |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| } |
| return dest; |
| } |
| |
| utils::eDest Overlay::getPipe_8x39(const PipeSpecs& pipeSpecs) { |
| //8x16 & 8x36 has same number of pipes, pipe-types & scaling capabilities. |
| //Rely on 8x16 until we see a need to change. |
| return getPipe_8x16(pipeSpecs); |
| } |
| |
| utils::eDest Overlay::getPipe_8994(const PipeSpecs& pipeSpecs) { |
| //If DMA pipes need to be used in block mode for downscale, there could be |
| //cases where consecutive rounds need separate modes, which cannot be |
| //supported since we at least need 1 round in between where the DMA is |
| //unused |
| eDest dest = OV_INVALID; |
| |
| // Reset format type to FORMAT_NONE to select the pipe irrespective of the |
| // format specifed by the client. This is required for the device where |
| // SMP starvation is unlikely, we need not keep track of formats |
| // programmed in the pipes to avoid potential pipe crunching. |
| resetPipeBookFormat(pipeSpecs.dpy); |
| |
| if(pipeSpecs.formatClass == FORMAT_YUV) { |
| return nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } else { |
| dest = nextPipe(OV_MDP_PIPE_RGB, pipeSpecs); |
| if(dest == OV_INVALID) { |
| dest = nextPipe(OV_MDP_PIPE_VG, pipeSpecs); |
| } |
| if(dest == OV_INVALID and not pipeSpecs.needsScaling) { |
| dest = nextPipe(OV_MDP_PIPE_DMA, pipeSpecs); |
| } |
| } |
| |
| return dest; |
| } |
| |
| utils::eDest Overlay::getPipe_8992(const PipeSpecs& pipeSpecs) { |
| return getPipe_8994(pipeSpecs); |
| } |
| |
| void Overlay::endAllSessions() { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if(mPipeBook[i].valid() && mPipeBook[i].mSession==PipeBook::START) |
| mPipeBook[i].mSession = PipeBook::END; |
| } |
| } |
| |
| bool Overlay::isPipeTypeAttached(eMdpPipeType type) { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if(type == PipeBook::getPipeType((eDest)i) && |
| mPipeBook[i].mDisplay != DPY_UNUSED) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool Overlay::needsPrioritySwap(utils::eDest pipe1Index, |
| utils::eDest pipe2Index) { |
| validate((int)pipe1Index); |
| validate((int)pipe2Index); |
| |
| uint8_t pipe1Prio = mPipeBook[(int)pipe1Index].mPipe->getPriority(); |
| uint8_t pipe2Prio = mPipeBook[(int)pipe2Index].mPipe->getPriority(); |
| |
| int pipe1Id = mPipeBook[(int)pipe1Index].mPipe->getPipeId(); |
| int pipe2Id = mPipeBook[(int)pipe2Index].mPipe->getPipeId(); |
| |
| utils::eMdpPipeType leftType = PipeBook::getPipeType(pipe1Index); |
| utils::eMdpPipeType rightType = PipeBook::getPipeType(pipe2Index); |
| |
| if(pipe1Id >=0 && pipe2Id >=0) { |
| // LEFT priority should be higher then RIGHT |
| return (pipe1Prio > pipe2Prio); |
| } else if(pipe1Id < 0 && pipe2Id < 0) { |
| // If we are here, Source Split is enabled and both pipes are |
| // new requests. In this case left type should be of higher prio |
| // than right type |
| if(leftType == rightType) { |
| //Safe. Onus on driver to assign correct pipes within same type |
| return false; |
| } else { |
| //This check takes advantage of having only 3 types and avoids 3 |
| //different failure combination checks. |
| // Swap IF: |
| // ---------------- |
| // | Left | Right | |
| // ================ |
| // | DMA | ViG | |
| // ---------------- |
| // | DMA | RGB | |
| // ---------------- |
| // | RGB | ViG | |
| // ---------------- |
| return (leftType == OV_MDP_PIPE_DMA or rightType == OV_MDP_PIPE_VG); |
| } |
| } else if(pipe1Id < 0) { |
| //LEFT needs new allocation. |
| if(leftType == rightType) { |
| // If RIGHT has highest priority(lowest id), swap it. |
| return (pipe2Id == PipeBook::pipeMinID[leftType]); |
| } else { |
| return (leftType == OV_MDP_PIPE_DMA or rightType == OV_MDP_PIPE_VG); |
| } |
| } else { /* if (pipe2Id < 0) */ |
| // RIGHT needs new allocation. |
| if(leftType == rightType) { |
| // If LEFT has lowest priority(highest id), swap it. |
| return (pipe1Id == PipeBook::pipeMaxID[leftType]); |
| } else { |
| return (leftType == OV_MDP_PIPE_DMA or rightType == OV_MDP_PIPE_VG); |
| } |
| } |
| } |
| |
| bool Overlay::commit(utils::eDest dest) { |
| bool ret = false; |
| validate((int)dest); |
| |
| if(mPipeBook[dest].mPipe->commit()) { |
| ret = true; |
| PipeBook::setUse((int)dest); |
| } else { |
| clear(mPipeBook[dest].mDisplay); |
| } |
| return ret; |
| } |
| |
| bool Overlay::queueBuffer(int fd, uint32_t offset, |
| utils::eDest dest) { |
| bool ret = false; |
| validate((int)dest); |
| //Queue only if commit() has succeeded (and the bit set) |
| if(PipeBook::isUsed((int)dest)) { |
| ret = mPipeBook[dest].mPipe->queueBuffer(fd, offset); |
| } |
| return ret; |
| } |
| |
| void Overlay::setCrop(const utils::Dim& d, |
| utils::eDest dest) { |
| validate((int)dest); |
| mPipeBook[dest].mPipe->setCrop(d); |
| } |
| |
| void Overlay::setColor(const uint32_t color, |
| utils::eDest dest) { |
| validate((int)dest); |
| mPipeBook[dest].mPipe->setColor(color); |
| } |
| |
| void Overlay::setPosition(const utils::Dim& d, |
| utils::eDest dest) { |
| validate((int)dest); |
| mPipeBook[dest].mPipe->setPosition(d); |
| } |
| |
| void Overlay::setTransform(const int orient, |
| utils::eDest dest) { |
| validate((int)dest); |
| |
| utils::eTransform transform = |
| static_cast<utils::eTransform>(orient); |
| mPipeBook[dest].mPipe->setTransform(transform); |
| |
| } |
| |
| void Overlay::setSource(const utils::PipeArgs args, |
| utils::eDest dest) { |
| validate((int)dest); |
| |
| setPipeType(dest, PipeBook::getPipeType(dest)); |
| mPipeBook[dest].mPipe->setSource(args); |
| } |
| |
| void Overlay::setVisualParams(const MetaData_t& metadata, utils::eDest dest) { |
| validate((int)dest); |
| mPipeBook[dest].mPipe->setVisualParams(metadata); |
| } |
| |
| void Overlay::setPipeType(utils::eDest pipeIndex, |
| const utils::eMdpPipeType pType) { |
| mPipeBook[pipeIndex].mPipe->setPipeType(pType); |
| } |
| |
| Overlay* Overlay::getInstance() { |
| if(sInstance == NULL) { |
| sInstance = new Overlay(); |
| } |
| return sInstance; |
| } |
| |
| // Clears any VG pipes allocated to the fb devices |
| // Generates a LUT for pipe types. |
| int Overlay::initOverlay() { |
| int mdpVersion = qdutils::MDPVersion::getInstance().getMDPVersion(); |
| int numPipesXType[OV_MDP_PIPE_ANY] = {0}; |
| numPipesXType[OV_MDP_PIPE_RGB] = |
| qdutils::MDPVersion::getInstance().getRGBPipes(); |
| numPipesXType[OV_MDP_PIPE_VG] = |
| qdutils::MDPVersion::getInstance().getVGPipes(); |
| numPipesXType[OV_MDP_PIPE_DMA] = |
| qdutils::MDPVersion::getInstance().getDMAPipes(); |
| |
| int index = 0; |
| for(int X = 0; X < (int)OV_MDP_PIPE_ANY; X++) { //iterate over types |
| for(int j = 0; j < numPipesXType[X]; j++) { //iterate over num |
| PipeBook::pipeTypeLUT[index] = (utils::eMdpPipeType)X; |
| index++; |
| } |
| } |
| |
| PipeBook::pipeMinID[OV_MDP_PIPE_RGB] = 8; |
| PipeBook::pipeMaxID[OV_MDP_PIPE_RGB] = (numPipesXType[OV_MDP_PIPE_RGB] == 3)? 32 : 512; |
| PipeBook::pipeMinID[OV_MDP_PIPE_VG] = 1; |
| PipeBook::pipeMaxID[OV_MDP_PIPE_VG] = (numPipesXType[OV_MDP_PIPE_VG] == 3)? 4 : 256; |
| PipeBook::pipeMinID[OV_MDP_PIPE_DMA] = 64; |
| PipeBook::pipeMaxID[OV_MDP_PIPE_DMA] = 128; |
| |
| FILE *displayDeviceFP = NULL; |
| char fbType[MAX_FRAME_BUFFER_NAME_SIZE]; |
| char msmFbTypePath[MAX_FRAME_BUFFER_NAME_SIZE]; |
| const char *strDtvPanel = "dtv panel"; |
| const char *strWbPanel = "writeback panel"; |
| |
| for(int num = 1; num < MAX_FB_DEVICES; num++) { |
| snprintf (msmFbTypePath, sizeof(msmFbTypePath), |
| "/sys/class/graphics/fb%d/msm_fb_type", num); |
| displayDeviceFP = fopen(msmFbTypePath, "r"); |
| |
| if(displayDeviceFP){ |
| fread(fbType, sizeof(char), MAX_FRAME_BUFFER_NAME_SIZE, |
| displayDeviceFP); |
| |
| if(strncmp(fbType, strDtvPanel, strlen(strDtvPanel)) == 0) { |
| sDpyFbMap[DPY_EXTERNAL] = num; |
| } else if(strncmp(fbType, strWbPanel, strlen(strWbPanel)) == 0) { |
| sDpyFbMap[DPY_WRITEBACK] = num; |
| } |
| |
| fclose(displayDeviceFP); |
| } |
| } |
| |
| return 0; |
| } |
| |
| bool Overlay::displayCommit(const int& fd) { |
| utils::Dim lRoi, rRoi; |
| return displayCommit(fd, lRoi, rRoi); |
| } |
| |
| bool Overlay::displayCommit(const int& fd, const utils::Dim& lRoi, |
| const utils::Dim& rRoi) { |
| //Commit |
| struct mdp_display_commit info; |
| memset(&info, 0, sizeof(struct mdp_display_commit)); |
| info.flags = MDP_DISPLAY_COMMIT_OVERLAY; |
| info.l_roi.x = lRoi.x; |
| info.l_roi.y = lRoi.y; |
| info.l_roi.w = lRoi.w; |
| info.l_roi.h = lRoi.h; |
| info.r_roi.x = rRoi.x; |
| info.r_roi.y = rRoi.y; |
| info.r_roi.w = rRoi.w; |
| info.r_roi.h = rRoi.h; |
| |
| if(!mdp_wrapper::displayCommit(fd, info)) { |
| ALOGE("%s: commit failed", __func__); |
| return false; |
| } |
| return true; |
| } |
| |
| void Overlay::getDump(char *buf, size_t len) { |
| int totalPipes = 0; |
| const char *str = "\nOverlay State\n\n"; |
| strlcat(buf, str, len); |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if(mPipeBook[i].valid()) { |
| mPipeBook[i].mPipe->getDump(buf, len); |
| char str[64] = {'\0'}; |
| snprintf(str, 64, "Display=%d\n\n", mPipeBook[i].mDisplay); |
| strlcat(buf, str, len); |
| totalPipes++; |
| } |
| } |
| char str_pipes[64] = {'\0'}; |
| snprintf(str_pipes, 64, "Pipes=%d\n\n", totalPipes); |
| strlcat(buf, str_pipes, len); |
| } |
| |
| void Overlay::clear(int dpy) { |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if (mPipeBook[i].mDisplay == dpy) { |
| // Mark as available for this round |
| PipeBook::resetUse(i); |
| PipeBook::resetAllocation(i); |
| if(getPipeId((utils::eDest)i) == -1) { |
| mPipeBook[i].destroy(); |
| } |
| } |
| } |
| } |
| |
| bool Overlay::validateAndSet(const int& dpy, const int& fbFd) { |
| GenericPipe* pipeArray[PipeBook::NUM_PIPES]; |
| memset(pipeArray, 0, sizeof(GenericPipe*)*(PipeBook::NUM_PIPES)); |
| |
| int num = 0; |
| for(int i = 0; i < PipeBook::NUM_PIPES; i++) { |
| if(PipeBook::isUsed(i) && mPipeBook[i].valid() && |
| mPipeBook[i].mDisplay == dpy) { |
| pipeArray[num++] = mPipeBook[i].mPipe; |
| } |
| } |
| |
| //Protect against misbehaving clients |
| return num ? GenericPipe::validateAndSet(pipeArray, num, fbFd) : true; |
| } |
| |
| void Overlay::initScalar() { |
| if(sLibScaleHandle == NULL) { |
| sLibScaleHandle = dlopen("libscale.so", RTLD_NOW); |
| if(sLibScaleHandle) { |
| *(void **) &sFnProgramScale = |
| dlsym(sLibScaleHandle, "programScale"); |
| } |
| } |
| } |
| |
| void Overlay::destroyScalar() { |
| if(sLibScaleHandle) { |
| dlclose(sLibScaleHandle); |
| sLibScaleHandle = NULL; |
| } |
| } |
| |
| void Overlay::initPostProc() { |
| sLibAblHandle = dlopen("libmm-abl.so", RTLD_NOW); |
| if (sLibAblHandle) { |
| *(void **)&sFnppParams = dlsym(sLibAblHandle, |
| "display_pp_compute_params"); |
| } else { |
| ALOGE("%s: Not able to load libmm-abl.so", __FUNCTION__); |
| } |
| } |
| |
| void Overlay::destroyPostProc() { |
| if (sLibAblHandle) { |
| dlclose(sLibAblHandle); |
| sLibAblHandle = NULL; |
| } |
| } |
| |
| void Overlay::PipeBook::init() { |
| mPipe = NULL; |
| mDisplay = DPY_UNUSED; |
| mMixer = MIXER_UNUSED; |
| mFormatType = FORMAT_NONE; |
| } |
| |
| void Overlay::PipeBook::destroy() { |
| if(mPipe) { |
| delete mPipe; |
| mPipe = NULL; |
| } |
| mDisplay = DPY_UNUSED; |
| mMixer = MIXER_UNUSED; |
| mFormatType = FORMAT_NONE; |
| mSession = NONE; |
| } |
| |
| Overlay* Overlay::sInstance = 0; |
| int Overlay::sDpyFbMap[DPY_MAX] = {0, -1, -1}; |
| int Overlay::sDMAMode = DMA_LINE_MODE; |
| bool Overlay::sDMAMultiplexingSupported = false; |
| bool Overlay::sDebugPipeLifecycle = false; |
| int Overlay::PipeBook::NUM_PIPES = 0; |
| int Overlay::PipeBook::sPipeUsageBitmap = 0; |
| int Overlay::PipeBook::sLastUsageBitmap = 0; |
| int Overlay::PipeBook::sAllocatedBitmap = 0; |
| utils::eMdpPipeType Overlay::PipeBook::pipeTypeLUT[utils::OV_MAX] = |
| {utils::OV_MDP_PIPE_ANY}; |
| int Overlay::PipeBook::pipeMinID[utils::OV_MDP_PIPE_ANY] = {0}; |
| int Overlay::PipeBook::pipeMaxID[utils::OV_MDP_PIPE_ANY] = {0}; |
| void *Overlay::sLibScaleHandle = NULL; |
| int (*Overlay::sFnProgramScale)(struct mdp_overlay_list *) = NULL; |
| /* Dynamically link ABL library */ |
| void *Overlay::sLibAblHandle = NULL; |
| int (*Overlay::sFnppParams)(const struct compute_params *, |
| struct mdp_overlay_pp_params *) = NULL; |
| |
| }; // namespace overlay |