| /* |
| * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Copyright 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <cutils/properties.h> |
| #include <errno.h> |
| #include <gr.h> |
| #include <gralloc_priv.h> |
| #include <math.h> |
| #include <sync/sync.h> |
| #include <utils/constants.h> |
| #include <utils/debug.h> |
| #include <utils/formats.h> |
| #include <utils/rect.h> |
| #include <qd_utils.h> |
| |
| #include <algorithm> |
| #include <map> |
| #include <sstream> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include "hwc_display.h" |
| #include "hwc_debugger.h" |
| #include "blit_engine_c2d.h" |
| |
| #ifdef QTI_BSP |
| #include <hardware/display_defs.h> |
| #endif |
| |
| #define __CLASS__ "HWCDisplay" |
| |
| namespace sdm { |
| |
| static void ApplyDeInterlaceAdjustment(Layer *layer) { |
| // De-interlacing adjustment |
| if (layer->input_buffer.flags.interlace) { |
| float height = (layer->src_rect.bottom - layer->src_rect.top) / 2.0f; |
| layer->src_rect.top = ROUND_UP_ALIGN_DOWN(layer->src_rect.top / 2.0f, 2); |
| layer->src_rect.bottom = layer->src_rect.top + floorf(height); |
| } |
| } |
| |
| HWCColorMode::HWCColorMode(DisplayInterface *display_intf) : display_intf_(display_intf) {} |
| |
| HWC2::Error HWCColorMode::Init() { |
| PopulateColorModes(); |
| return SetColorMode(HAL_COLOR_MODE_NATIVE); |
| } |
| |
| HWC2::Error HWCColorMode::DeInit() { |
| color_mode_transform_map_.clear(); |
| return HWC2::Error::None; |
| } |
| |
| uint32_t HWCColorMode::GetColorModeCount() { |
| uint32_t count = UINT32(color_mode_transform_map_.size()); |
| DLOGI("Supported color mode count = %d", count); |
| |
| return std::max(1U, count); |
| } |
| |
| HWC2::Error HWCColorMode::GetColorModes(uint32_t *out_num_modes, |
| android_color_mode_t *out_modes) { |
| auto it = color_mode_transform_map_.begin(); |
| for (auto i = 0; it != color_mode_transform_map_.end(); it++, i++) { |
| out_modes[i] = it->first; |
| DLOGI("Supports color mode[%d] = %d", i, it->first); |
| } |
| *out_num_modes = UINT32(color_mode_transform_map_.size()); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorMode(android_color_mode_t mode) { |
| // first mode in 2D matrix is the mode (identity) |
| auto status = HandleColorModeTransform(mode, current_color_transform_, color_matrix_); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed for mode = %d", mode); |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorTransform(const float *matrix, android_color_transform_t hint) { |
| if (!matrix) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| double color_matrix[kColorTransformMatrixCount] = {0}; |
| CopyColorTransformMatrix(matrix, color_matrix); |
| |
| auto status = HandleColorModeTransform(current_color_mode_, hint, color_matrix); |
| if (status != HWC2::Error::None) { |
| DLOGE("failed for hint = %d", hint); |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCColorMode::HandleColorModeTransform(android_color_mode_t mode, |
| android_color_transform_t hint, |
| const double *matrix) { |
| android_color_transform_t transform_hint = hint; |
| std::string color_mode_transform; |
| bool use_matrix = false; |
| if (hint != HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX) { |
| // if the mode + transfrom request from HWC matches one mode in SDM, set that |
| color_mode_transform = color_mode_transform_map_[mode][hint]; |
| if (color_mode_transform.empty()) { |
| transform_hint = HAL_COLOR_TRANSFORM_IDENTITY; |
| use_matrix = true; |
| } |
| } else { |
| use_matrix = true; |
| transform_hint = HAL_COLOR_TRANSFORM_IDENTITY; |
| } |
| |
| // if the mode count is 1, then only native mode is supported, so just apply matrix w/o |
| // setting mode |
| if (color_mode_transform_map_.size() > 1U) { |
| color_mode_transform = color_mode_transform_map_[mode][transform_hint]; |
| DisplayError error = display_intf_->SetColorMode(color_mode_transform); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set color_mode = %d transform_hint = %d", mode, hint); |
| // failure to force client composition |
| return HWC2::Error::Unsupported; |
| } |
| } |
| |
| if (use_matrix) { |
| DisplayError error = display_intf_->SetColorTransform(kColorTransformMatrixCount, matrix); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set Color Transform Matrix"); |
| // failure to force client composition |
| return HWC2::Error::Unsupported; |
| } |
| } |
| |
| current_color_mode_ = mode; |
| current_color_transform_ = hint; |
| CopyColorTransformMatrix(matrix, color_matrix_); |
| DLOGI("Setting Color Mode = %d Transform Hint = %d Success", mode, hint); |
| |
| return HWC2::Error::None; |
| } |
| |
| void HWCColorMode::PopulateColorModes() { |
| uint32_t color_mode_count = 0; |
| // SDM returns modes which is string combination of mode + transform. |
| DisplayError error = display_intf_->GetColorModeCount(&color_mode_count); |
| if (error != kErrorNone || (color_mode_count == 0)) { |
| DLOGW("GetColorModeCount failed, use native color mode"); |
| PopulateTransform(HAL_COLOR_MODE_NATIVE, "native_identity"); |
| return; |
| } |
| |
| DLOGV_IF(kTagQDCM, "Color Modes supported count = %d", color_mode_count); |
| |
| std::vector<std::string> color_modes(color_mode_count); |
| error = display_intf_->GetColorModes(&color_mode_count, &color_modes); |
| |
| for (uint32_t i = 0; i < color_mode_count; i++) { |
| std::string &mode_string = color_modes.at(i); |
| DLOGV_IF(kTagQDCM, "Color Mode[%d] = %s", i, mode_string.c_str()); |
| if (mode_string.find("hal_native") != std::string::npos) { |
| PopulateTransform(HAL_COLOR_MODE_NATIVE, mode_string); |
| } else if (mode_string.find("hal_srgb") != std::string::npos) { |
| PopulateTransform(HAL_COLOR_MODE_SRGB, mode_string); |
| } else if (mode_string.find("hal_adobe") != std::string::npos) { |
| PopulateTransform(HAL_COLOR_MODE_ADOBE_RGB, mode_string); |
| } else if (mode_string.find("hal_dci_p3") != std::string::npos) { |
| PopulateTransform(HAL_COLOR_MODE_DCI_P3, mode_string); |
| } |
| } |
| } |
| |
| void HWCColorMode::PopulateTransform(const android_color_mode_t &mode, |
| const std::string &color_transform) { |
| // TODO(user): Check the substring from QDCM |
| if (color_transform.find("identity") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_IDENTITY] = color_transform; |
| } else if (color_transform.find("arbitrary") != std::string::npos) { |
| // no color mode for arbitrary |
| } else if (color_transform.find("inverse") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_VALUE_INVERSE] = color_transform; |
| } else if (color_transform.find("grayscale") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_GRAYSCALE] = color_transform; |
| } else if (color_transform.find("correct_protonopia") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA] = color_transform; |
| } else if (color_transform.find("correct_deuteranopia") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA] = color_transform; |
| } else if (color_transform.find("correct_tritanopia") != std::string::npos) { |
| color_mode_transform_map_[mode][HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA] = color_transform; |
| } |
| } |
| |
| HWCDisplay::HWCDisplay(CoreInterface *core_intf, HWCCallbacks *callbacks, DisplayType type, |
| hwc2_display_t id, bool needs_blit, qService::QService *qservice, |
| DisplayClass display_class) |
| : core_intf_(core_intf), |
| callbacks_(callbacks), |
| type_(type), |
| id_(id), |
| needs_blit_(needs_blit), |
| qservice_(qservice), |
| display_class_(display_class) { |
| } |
| |
| int HWCDisplay::Init() { |
| DisplayError error = core_intf_->CreateDisplay(type_, this, &display_intf_); |
| if (error != kErrorNone) { |
| DLOGE("Display create failed. Error = %d display_type %d event_handler %p disp_intf %p", error, |
| type_, this, &display_intf_); |
| return -EINVAL; |
| } |
| |
| int property_swap_interval = 1; |
| HWCDebugHandler::Get()->GetProperty("debug.egl.swapinterval", &property_swap_interval); |
| if (property_swap_interval == 0) { |
| swap_interval_zero_ = true; |
| } |
| |
| |
| client_target_ = new HWCLayer(id_); |
| int blit_enabled = 0; |
| HWCDebugHandler::Get()->GetProperty("persist.hwc.blit.comp", &blit_enabled); |
| if (needs_blit_ && blit_enabled) { |
| blit_engine_ = new BlitEngineC2d(); |
| if (!blit_engine_) { |
| DLOGI("Create Blit Engine C2D failed"); |
| } else { |
| if (blit_engine_->Init() < 0) { |
| DLOGI("Blit Engine Init failed, Blit Composition will not be used!!"); |
| delete blit_engine_; |
| blit_engine_ = NULL; |
| } |
| } |
| } |
| |
| display_intf_->GetRefreshRateRange(&min_refresh_rate_, &max_refresh_rate_); |
| current_refresh_rate_ = max_refresh_rate_; |
| DLOGI("Display created with id: %d", id_); |
| return 0; |
| } |
| |
| int HWCDisplay::Deinit() { |
| DisplayError error = core_intf_->DestroyDisplay(display_intf_); |
| if (error != kErrorNone) { |
| DLOGE("Display destroy failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| delete client_target_; |
| |
| if (blit_engine_) { |
| blit_engine_->DeInit(); |
| delete blit_engine_; |
| blit_engine_ = NULL; |
| } |
| |
| if (color_mode_) { |
| color_mode_->DeInit(); |
| delete color_mode_; |
| } |
| |
| return 0; |
| } |
| |
| // LayerStack operations |
| HWC2::Error HWCDisplay::CreateLayer(hwc2_layer_t *out_layer_id) { |
| HWCLayer *layer = *layer_set_.emplace(new HWCLayer(id_)); |
| layer_map_.emplace(std::make_pair(layer->GetId(), layer)); |
| *out_layer_id = layer->GetId(); |
| geometry_changes_ |= GeometryChanges::kAdded; |
| return HWC2::Error::None; |
| } |
| |
| HWCLayer *HWCDisplay::GetHWCLayer(hwc2_layer_t layer_id) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGE("[%" PRIu64 "] GetLayer(%" PRIu64 ") failed: no such layer", id_, layer_id); |
| return nullptr; |
| } else { |
| return map_layer->second; |
| } |
| } |
| |
| HWC2::Error HWCDisplay::DestroyLayer(hwc2_layer_t layer_id) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGE("[%" PRIu64 "] destroyLayer(%" PRIu64 ") failed: no such layer", id_, layer_id); |
| return HWC2::Error::BadLayer; |
| } |
| const auto layer = map_layer->second; |
| layer_map_.erase(map_layer); |
| const auto z_range = layer_set_.equal_range(layer); |
| for (auto current = z_range.first; current != z_range.second; ++current) { |
| if (*current == layer) { |
| current = layer_set_.erase(current); |
| delete layer; |
| break; |
| } |
| } |
| |
| geometry_changes_ |= GeometryChanges::kRemoved; |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplay::BuildLayerStack() { |
| layer_stack_ = LayerStack(); |
| display_rect_ = LayerRect(); |
| metadata_refresh_rate_ = 0; |
| |
| // Add one layer for fb target |
| // TODO(user): Add blit target layers |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| layer->flags = {}; // Reset earlier flags |
| if (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::Client) { |
| layer->flags.skip = true; |
| } else if (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::SolidColor) { |
| layer->flags.solid_fill = true; |
| } |
| |
| // set default composition as GPU for SDM |
| layer->composition = kCompositionGPU; |
| |
| if (swap_interval_zero_) { |
| if (layer->input_buffer.acquire_fence_fd >= 0) { |
| close(layer->input_buffer.acquire_fence_fd); |
| layer->input_buffer.acquire_fence_fd = -1; |
| } |
| } |
| |
| const private_handle_t *handle = |
| reinterpret_cast<const private_handle_t *>(layer->input_buffer.buffer_id); |
| if (handle) { |
| if (handle->bufferType == BUFFER_TYPE_VIDEO) { |
| layer_stack_.flags.video_present = true; |
| } |
| // TZ Protected Buffer - L1 |
| if (handle->flags & private_handle_t::PRIV_FLAGS_SECURE_BUFFER) { |
| layer_stack_.flags.secure_present = true; |
| } |
| // Gralloc Usage Protected Buffer - L3 - which needs to be treated as Secure & avoid fallback |
| if (handle->flags & private_handle_t::PRIV_FLAGS_PROTECTED_BUFFER) { |
| layer_stack_.flags.secure_present = true; |
| } |
| } |
| |
| if (layer->flags.skip) { |
| layer_stack_.flags.skip_present = true; |
| } |
| |
| if (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::Cursor) { |
| // Currently we support only one HWCursor & only at top most z-order |
| if ((*layer_set_.rbegin())->GetId() == hwc_layer->GetId()) { |
| layer->flags.cursor = true; |
| layer_stack_.flags.cursor_present = true; |
| } |
| } |
| |
| // TODO(user): Move to a getter if this is needed at other places |
| hwc_rect_t scaled_display_frame = {INT(layer->dst_rect.left), INT(layer->dst_rect.top), |
| INT(layer->dst_rect.right), INT(layer->dst_rect.bottom)}; |
| ApplyScanAdjustment(&scaled_display_frame); |
| hwc_layer->SetLayerDisplayFrame(scaled_display_frame); |
| ApplyDeInterlaceAdjustment(layer); |
| // SDM requires these details even for solid fill |
| if (layer->flags.solid_fill) { |
| LayerBuffer *layer_buffer = &layer->input_buffer; |
| layer_buffer->width = UINT32(layer->dst_rect.right - layer->dst_rect.left); |
| layer_buffer->height = UINT32(layer->dst_rect.bottom - layer->dst_rect.top); |
| layer_buffer->unaligned_width = layer_buffer->width; |
| layer_buffer->unaligned_height = layer_buffer->height; |
| layer_buffer->acquire_fence_fd = -1; |
| layer_buffer->release_fence_fd = -1; |
| layer->src_rect.left = 0; |
| layer->src_rect.top = 0; |
| layer->src_rect.right = layer_buffer->width; |
| layer->src_rect.bottom = layer_buffer->height; |
| } |
| |
| if (layer->frame_rate > metadata_refresh_rate_) { |
| metadata_refresh_rate_ = SanitizeRefreshRate(layer->frame_rate); |
| } else { |
| layer->frame_rate = current_refresh_rate_; |
| } |
| display_rect_ = Union(display_rect_, layer->dst_rect); |
| geometry_changes_ |= hwc_layer->GetGeometryChanges(); |
| |
| layer->flags.updating = true; |
| if (layer_set_.size() <= kMaxLayerCount) { |
| layer->flags.updating = IsLayerUpdating(layer); |
| } |
| |
| layer_stack_.layers.push_back(layer); |
| } |
| // TODO(user): Set correctly when SDM supports geometry_changes as bitmask |
| layer_stack_.flags.geometry_changed = UINT32(geometry_changes_ > 0); |
| // Append client target to the layer stack |
| layer_stack_.layers.push_back(client_target_->GetSDMLayer()); |
| } |
| |
| void HWCDisplay::BuildSolidFillStack() { |
| layer_stack_ = LayerStack(); |
| display_rect_ = LayerRect(); |
| |
| layer_stack_.layers.push_back(solid_fill_layer_); |
| layer_stack_.flags.geometry_changed = 1U; |
| // Append client target to the layer stack |
| layer_stack_.layers.push_back(client_target_->GetSDMLayer()); |
| } |
| |
| HWC2::Error HWCDisplay::SetLayerZOrder(hwc2_layer_t layer_id, uint32_t z) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGE("[%" PRIu64 "] updateLayerZ failed to find layer", id_); |
| return HWC2::Error::BadLayer; |
| } |
| |
| const auto layer = map_layer->second; |
| const auto z_range = layer_set_.equal_range(layer); |
| bool layer_on_display = false; |
| for (auto current = z_range.first; current != z_range.second; ++current) { |
| if (*current == layer) { |
| if ((*current)->GetZ() == z) { |
| // Don't change anything if the Z hasn't changed |
| return HWC2::Error::None; |
| } |
| current = layer_set_.erase(current); |
| layer_on_display = true; |
| break; |
| } |
| } |
| |
| if (!layer_on_display) { |
| DLOGE("[%" PRIu64 "] updateLayerZ failed to find layer on display", id_); |
| return HWC2::Error::BadLayer; |
| } |
| |
| layer->SetLayerZOrder(z); |
| layer_set_.emplace(layer); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetVsyncEnabled(HWC2::Vsync enabled) { |
| DLOGV("Display ID: %d enabled: %s", id_, to_string(enabled).c_str()); |
| DisplayError error = kErrorNone; |
| |
| if (shutdown_pending_) { |
| return HWC2::Error::None; |
| } |
| |
| bool state; |
| if (enabled == HWC2::Vsync::Enable) |
| state = true; |
| else if (enabled == HWC2::Vsync::Disable) |
| state = false; |
| else |
| return HWC2::Error::BadParameter; |
| |
| error = display_intf_->SetVSyncState(state); |
| |
| if (error != kErrorNone) { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| DLOGE("Failed. enabled = %s, error = %d", to_string(enabled).c_str(), error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetPowerMode(HWC2::PowerMode mode) { |
| DLOGV("display = %d, mode = %s", id_, to_string(mode).c_str()); |
| DisplayState state = kStateOff; |
| bool flush_on_error = flush_on_error_; |
| |
| if (shutdown_pending_) { |
| return HWC2::Error::None; |
| } |
| |
| switch (mode) { |
| case HWC2::PowerMode::Off: |
| // During power off, all of the buffers are released. |
| // Do not flush until a buffer is successfully submitted again. |
| flush_on_error = false; |
| state = kStateOff; |
| break; |
| case HWC2::PowerMode::On: |
| state = kStateOn; |
| last_power_mode_ = HWC2::PowerMode::On; |
| break; |
| case HWC2::PowerMode::Doze: |
| state = kStateDoze; |
| last_power_mode_ = HWC2::PowerMode::Doze; |
| break; |
| case HWC2::PowerMode::DozeSuspend: |
| state = kStateDozeSuspend; |
| last_power_mode_ = HWC2::PowerMode::DozeSuspend; |
| break; |
| default: |
| return HWC2::Error::BadParameter; |
| } |
| |
| DisplayError error = display_intf_->SetDisplayState(state); |
| if (error == kErrorNone) { |
| flush_on_error_ = flush_on_error; |
| } else { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| DLOGE("Set state failed. Error = %d", error); |
| return HWC2::Error::BadParameter; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetClientTargetSupport(uint32_t width, uint32_t height, int32_t format, |
| int32_t dataspace) { |
| DisplayConfigVariableInfo variable_config; |
| display_intf_->GetFrameBufferConfig(&variable_config); |
| // TODO(user): Support scaled configurations, other formats and other dataspaces |
| if (format != HAL_PIXEL_FORMAT_RGBA_8888 || dataspace != HAL_DATASPACE_UNKNOWN || |
| width != variable_config.x_pixels || height != variable_config.y_pixels) { |
| return HWC2::Error::Unsupported; |
| } else { |
| return HWC2::Error::None; |
| } |
| } |
| |
| HWC2::Error HWCDisplay::GetColorModes(uint32_t *out_num_modes, android_color_mode_t *out_modes) { |
| if (out_modes) { |
| out_modes[0] = HAL_COLOR_MODE_NATIVE; |
| } |
| *out_num_modes = 1; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayConfigs(uint32_t *out_num_configs, hwc2_config_t *out_configs) { |
| // TODO(user): Actually handle multiple configs |
| if (out_configs == nullptr) { |
| *out_num_configs = 1; |
| } else { |
| *out_num_configs = 1; |
| out_configs[0] = 0; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayAttribute(hwc2_config_t config, HWC2::Attribute attribute, |
| int32_t *out_value) { |
| DisplayConfigVariableInfo variable_config; |
| DisplayError error = display_intf_->GetFrameBufferConfig(&variable_config); |
| if (error != kErrorNone) { |
| DLOGV("Get variable config failed. Error = %d", error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| switch (attribute) { |
| case HWC2::Attribute::VsyncPeriod: |
| *out_value = INT32(variable_config.vsync_period_ns); |
| break; |
| case HWC2::Attribute::Width: |
| *out_value = INT32(variable_config.x_pixels); |
| break; |
| case HWC2::Attribute::Height: |
| *out_value = INT32(variable_config.y_pixels); |
| break; |
| case HWC2::Attribute::DpiX: |
| *out_value = INT32(variable_config.x_dpi * 1000.0f); |
| break; |
| case HWC2::Attribute::DpiY: |
| *out_value = INT32(variable_config.y_dpi * 1000.0f); |
| break; |
| default: |
| DLOGW("Spurious attribute type = %s", to_string(attribute).c_str()); |
| return HWC2::Error::BadConfig; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayName(uint32_t *out_size, char *out_name) { |
| // TODO(user): Get panel name and EDID name and populate it here |
| if (out_name == nullptr) { |
| *out_size = 32; |
| } else { |
| std::string name; |
| switch (id_) { |
| case HWC_DISPLAY_PRIMARY: |
| name = "Primary Display"; |
| break; |
| case HWC_DISPLAY_EXTERNAL: |
| name = "External Display"; |
| break; |
| case HWC_DISPLAY_VIRTUAL: |
| name = "Virtual Display"; |
| break; |
| default: |
| name = "Unknown"; |
| break; |
| } |
| std::strncpy(out_name, name.c_str(), name.size()); |
| *out_size = UINT32(name.size()); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayType(int32_t *out_type) { |
| if (out_type != nullptr) { |
| if (id_ == HWC_DISPLAY_VIRTUAL) { |
| *out_type = HWC2_DISPLAY_TYPE_VIRTUAL; |
| } else { |
| *out_type = HWC2_DISPLAY_TYPE_PHYSICAL; |
| } |
| return HWC2::Error::None; |
| } else { |
| return HWC2::Error::BadParameter; |
| } |
| } |
| |
| // TODO(user): Store configurations and hook them up here |
| HWC2::Error HWCDisplay::GetActiveConfig(hwc2_config_t *out_config) { |
| if (out_config != nullptr) { |
| *out_config = 0; |
| return HWC2::Error::None; |
| } else { |
| return HWC2::Error::BadParameter; |
| } |
| } |
| |
| HWC2::Error HWCDisplay::SetClientTarget(buffer_handle_t target, int32_t acquire_fence, |
| int32_t dataspace, hwc_region_t damage) { |
| // TODO(user): SurfaceFlinger gives us a null pointer here when doing full SDE composition |
| // The error is problematic for layer caching as it would overwrite our cached client target. |
| // Reported bug 28569722 to resolve this. |
| // For now, continue to use the last valid buffer reported to us for layer caching. |
| if (target == nullptr) { |
| return HWC2::Error::None; |
| } |
| |
| if (acquire_fence == 0) { |
| DLOGE("acquire_fence is zero"); |
| return HWC2::Error::BadParameter; |
| } |
| |
| client_target_->SetLayerBuffer(target, acquire_fence); |
| client_target_->SetLayerSurfaceDamage(damage); |
| // Ignoring dataspace for now |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetActiveConfig(hwc2_config_t config) { |
| // We have only one config right now - do nothing |
| return HWC2::Error::None; |
| } |
| |
| DisplayError HWCDisplay::SetMixerResolution(uint32_t width, uint32_t height) { |
| return kErrorNotSupported; |
| } |
| |
| void HWCDisplay::SetFrameDumpConfig(uint32_t count, uint32_t bit_mask_layer_type) { |
| dump_frame_count_ = count; |
| dump_frame_index_ = 0; |
| dump_input_layers_ = ((bit_mask_layer_type & (1 << INPUT_LAYER_DUMP)) != 0); |
| |
| if (blit_engine_) { |
| blit_engine_->SetFrameDumpConfig(count); |
| } |
| |
| DLOGI("num_frame_dump %d, input_layer_dump_enable %d", dump_frame_count_, dump_input_layers_); |
| } |
| |
| HWC2::PowerMode HWCDisplay::GetLastPowerMode() { |
| return last_power_mode_; |
| } |
| |
| DisplayError HWCDisplay::VSync(const DisplayEventVSync &vsync) { |
| callbacks_->Vsync(id_, vsync.timestamp); |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::Refresh() { |
| return kErrorNotSupported; |
| } |
| |
| DisplayError HWCDisplay::CECMessage(char *message) { |
| if (qservice_) { |
| qservice_->onCECMessageReceived(message, 0); |
| } else { |
| DLOGW("Qservice instance not available."); |
| } |
| |
| return kErrorNone; |
| } |
| |
| HWC2::Error HWCDisplay::PrepareLayerStack(uint32_t *out_num_types, uint32_t *out_num_requests) { |
| layer_changes_.clear(); |
| layer_requests_.clear(); |
| if (shutdown_pending_) { |
| return HWC2::Error::BadDisplay; |
| } |
| |
| if (!skip_prepare_) { |
| DisplayError error = display_intf_->Prepare(&layer_stack_); |
| if (error != kErrorNone) { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| } else if (error != kErrorPermission) { |
| DLOGE("Prepare failed. Error = %d", error); |
| // To prevent surfaceflinger infinite wait, flush the previous frame during Commit() |
| // so that previous buffer and fences are released, and override the error. |
| flush_ = true; |
| } |
| return HWC2::Error::BadDisplay; |
| } |
| } else { |
| // Skip is not set |
| MarkLayersForGPUBypass(); |
| skip_prepare_ = false; |
| DLOGI("SecureDisplay %s, Skip Prepare/Commit and Flush", |
| secure_display_active_ ? "Starting" : "Stopping"); |
| flush_ = true; |
| } |
| |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| LayerComposition &composition = layer->composition; |
| |
| if ((composition == kCompositionSDE) || (composition == kCompositionHybrid) || |
| (composition == kCompositionBlit)) { |
| layer_requests_[hwc_layer->GetId()] = HWC2::LayerRequest::ClearClientTarget; |
| } |
| |
| HWC2::Composition requested_composition = hwc_layer->GetClientRequestedCompositionType(); |
| // Set SDM composition to HWC2 type in HWCLayer |
| hwc_layer->SetComposition(composition); |
| HWC2::Composition device_composition = hwc_layer->GetDeviceSelectedCompositionType(); |
| // Update the changes list only if the requested composition is different from SDM comp type |
| // TODO(user): Take Care of other comptypes(BLIT) |
| if (requested_composition != device_composition) { |
| layer_changes_[hwc_layer->GetId()] = device_composition; |
| } |
| } |
| *out_num_types = UINT32(layer_changes_.size()); |
| *out_num_requests = UINT32(layer_requests_.size()); |
| validated_ = true; |
| if (*out_num_types > 0) { |
| return HWC2::Error::HasChanges; |
| } else { |
| return HWC2::Error::None; |
| } |
| } |
| |
| HWC2::Error HWCDisplay::AcceptDisplayChanges() { |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validated_) { |
| return HWC2::Error::NotValidated; |
| } |
| |
| for (const auto& change : layer_changes_) { |
| auto hwc_layer = layer_map_[change.first]; |
| auto composition = change.second; |
| if (hwc_layer != nullptr) { |
| hwc_layer->UpdateClientCompositionType(composition); |
| } else { |
| DLOGW("Invalid layer: %" PRIu64, change.first); |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetChangedCompositionTypes(uint32_t *out_num_elements, |
| hwc2_layer_t *out_layers, int32_t *out_types) { |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validated_) { |
| DLOGW("Display is not validated"); |
| return HWC2::Error::NotValidated; |
| } |
| *out_num_elements = UINT32(layer_changes_.size()); |
| if (out_layers != nullptr && out_types != nullptr) { |
| int i = 0; |
| for (auto change : layer_changes_) { |
| out_layers[i] = change.first; |
| out_types[i] = INT32(change.second); |
| i++; |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetReleaseFences(uint32_t *out_num_elements, hwc2_layer_t *out_layers, |
| int32_t *out_fences) { |
| if (out_layers != nullptr && out_fences != nullptr) { |
| int i = 0; |
| for (auto hwc_layer : layer_set_) { |
| out_layers[i] = hwc_layer->GetId(); |
| out_fences[i] = hwc_layer->PopReleaseFence(); |
| i++; |
| } |
| } |
| *out_num_elements = UINT32(layer_set_.size()); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayRequests(int32_t *out_display_requests, |
| uint32_t *out_num_elements, hwc2_layer_t *out_layers, |
| int32_t *out_layer_requests) { |
| // No display requests for now |
| // Use for sharing blit buffers and |
| // writing wfd buffer directly to output if there is full GPU composition |
| // and no color conversion needed |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validated_) { |
| DLOGW("Display is not validated"); |
| return HWC2::Error::NotValidated; |
| } |
| *out_display_requests = 0; |
| *out_num_elements = UINT32(layer_requests_.size()); |
| if (out_layers != nullptr && out_layer_requests != nullptr) { |
| int i = 0; |
| for (auto &request : layer_requests_) { |
| out_layers[i] = request.first; |
| out_layer_requests[i] = INT32(request.second); |
| i++; |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetHdrCapabilities(uint32_t *out_num_types, int32_t *out_types, |
| float *out_max_luminance, |
| float *out_max_average_luminance, |
| float *out_min_luminance) { |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| |
| if (out_types == nullptr) { |
| *out_num_types = 0; |
| if (fixed_info.hdr_supported) { |
| // 1(now) - because we support only HDR10, change when HLG & DOLBY vision are supported |
| *out_num_types = 1; |
| } |
| } else { |
| // Only HDR10 supported |
| out_types[0] = HAL_HDR_HDR10; |
| static const float kLuminanceFactor = 10000.0; |
| // luminance is expressed in the unit of 0.0001 cd/m2, convert it to 1cd/m2. |
| *out_max_luminance = FLOAT(fixed_info.max_luminance)/kLuminanceFactor; |
| *out_max_average_luminance = FLOAT(fixed_info.average_luminance)/kLuminanceFactor; |
| *out_min_luminance = FLOAT(fixed_info.min_luminance)/kLuminanceFactor; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| |
| HWC2::Error HWCDisplay::CommitLayerStack(void) { |
| if (shutdown_pending_ || layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validated_) { |
| DLOGW("Display is not validated"); |
| return HWC2::Error::NotValidated; |
| } |
| |
| DumpInputBuffers(); |
| |
| if (!flush_) { |
| DisplayError error = kErrorUndefined; |
| error = display_intf_->Commit(&layer_stack_); |
| validated_ = false; |
| |
| if (error == kErrorNone) { |
| // A commit is successfully submitted, start flushing on failure now onwards. |
| flush_on_error_ = true; |
| } else { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::Unsupported; |
| } else if (error != kErrorPermission) { |
| DLOGE("Commit failed. Error = %d", error); |
| // To prevent surfaceflinger infinite wait, flush the previous frame during Commit() |
| // so that previous buffer and fences are released, and override the error. |
| flush_ = true; |
| } |
| } |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::PostCommitLayerStack(int32_t *out_retire_fence) { |
| auto status = HWC2::Error::None; |
| |
| // Do no call flush on errors, if a successful buffer is never submitted. |
| if (flush_ && flush_on_error_) { |
| display_intf_->Flush(); |
| } |
| |
| // TODO(user): No way to set the client target release fence on SF |
| int32_t &client_target_release_fence = |
| client_target_->GetSDMLayer()->input_buffer.release_fence_fd; |
| if (client_target_release_fence >= 0) { |
| close(client_target_release_fence); |
| client_target_release_fence = -1; |
| } |
| |
| for (auto hwc_layer : layer_set_) { |
| hwc_layer->ResetGeometryChanges(); |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| LayerBuffer *layer_buffer = &layer->input_buffer; |
| |
| if (!flush_) { |
| // If swapinterval property is set to 0 or for single buffer layers, do not update f/w |
| // release fences and discard fences from driver |
| if (swap_interval_zero_ || layer->flags.single_buffer) { |
| close(layer_buffer->release_fence_fd); |
| layer_buffer->release_fence_fd = -1; |
| } else if (layer->composition != kCompositionGPU) { |
| hwc_layer->PushReleaseFence(layer_buffer->release_fence_fd); |
| layer_buffer->release_fence_fd = -1; |
| } else { |
| hwc_layer->PushReleaseFence(-1); |
| } |
| } |
| |
| if (layer_buffer->acquire_fence_fd >= 0) { |
| close(layer_buffer->acquire_fence_fd); |
| layer_buffer->acquire_fence_fd = -1; |
| } |
| } |
| |
| *out_retire_fence = -1; |
| if (!flush_) { |
| // if swapinterval property is set to 0 then close and reset the list retire fence |
| if (swap_interval_zero_) { |
| close(layer_stack_.retire_fence_fd); |
| layer_stack_.retire_fence_fd = -1; |
| } |
| *out_retire_fence = layer_stack_.retire_fence_fd; |
| |
| if (dump_frame_count_) { |
| dump_frame_count_--; |
| dump_frame_index_++; |
| } |
| } |
| |
| geometry_changes_ = GeometryChanges::kNone; |
| flush_ = false; |
| |
| return status; |
| } |
| |
| void HWCDisplay::SetIdleTimeoutMs(uint32_t timeout_ms) { |
| return; |
| } |
| |
| DisplayError HWCDisplay::SetMaxMixerStages(uint32_t max_mixer_stages) { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->SetMaxMixerStages(max_mixer_stages); |
| } |
| |
| return error; |
| } |
| |
| LayerBufferFormat HWCDisplay::GetSDMFormat(const int32_t &source, const int flags) { |
| LayerBufferFormat format = kFormatInvalid; |
| if (flags & private_handle_t::PRIV_FLAGS_UBWC_ALIGNED) { |
| switch (source) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| format = kFormatRGBA8888Ubwc; |
| break; |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| format = kFormatRGBX8888Ubwc; |
| break; |
| case HAL_PIXEL_FORMAT_BGR_565: |
| format = kFormatBGR565Ubwc; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS: |
| case HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS_UBWC: |
| case HAL_PIXEL_FORMAT_NV12_ENCODEABLE: |
| format = kFormatYCbCr420SPVenusUbwc; |
| break; |
| case HAL_PIXEL_FORMAT_RGBA_1010102: |
| format = kFormatRGBA1010102Ubwc; |
| break; |
| case HAL_PIXEL_FORMAT_RGBX_1010102: |
| format = kFormatRGBX1010102Ubwc; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_TP10_UBWC: |
| format = kFormatYCbCr420TP10Ubwc; |
| break; |
| default: |
| DLOGE("Unsupported format type for UBWC %d", source); |
| return kFormatInvalid; |
| } |
| return format; |
| } |
| |
| switch (source) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| format = kFormatRGBA8888; |
| break; |
| case HAL_PIXEL_FORMAT_RGBA_5551: |
| format = kFormatRGBA5551; |
| break; |
| case HAL_PIXEL_FORMAT_RGBA_4444: |
| format = kFormatRGBA4444; |
| break; |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| format = kFormatBGRA8888; |
| break; |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| format = kFormatRGBX8888; |
| break; |
| case HAL_PIXEL_FORMAT_BGRX_8888: |
| format = kFormatBGRX8888; |
| break; |
| case HAL_PIXEL_FORMAT_RGB_888: |
| format = kFormatRGB888; |
| break; |
| case HAL_PIXEL_FORMAT_RGB_565: |
| format = kFormatRGB565; |
| break; |
| case HAL_PIXEL_FORMAT_BGR_565: |
| format = kFormatBGR565; |
| break; |
| case HAL_PIXEL_FORMAT_NV12_ENCODEABLE: |
| case HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS: |
| format = kFormatYCbCr420SemiPlanarVenus; |
| break; |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP_VENUS: |
| format = kFormatYCrCb420SemiPlanarVenus; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS_UBWC: |
| format = kFormatYCbCr420SPVenusUbwc; |
| break; |
| case HAL_PIXEL_FORMAT_YV12: |
| format = kFormatYCrCb420PlanarStride16; |
| break; |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP: |
| format = kFormatYCrCb420SemiPlanar; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_SP: |
| format = kFormatYCbCr420SemiPlanar; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_422_SP: |
| format = kFormatYCbCr422H2V1SemiPlanar; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_422_I: |
| format = kFormatYCbCr422H2V1Packed; |
| break; |
| case HAL_PIXEL_FORMAT_RGBA_1010102: |
| format = kFormatRGBA1010102; |
| break; |
| case HAL_PIXEL_FORMAT_ARGB_2101010: |
| format = kFormatARGB2101010; |
| break; |
| case HAL_PIXEL_FORMAT_RGBX_1010102: |
| format = kFormatRGBX1010102; |
| break; |
| case HAL_PIXEL_FORMAT_XRGB_2101010: |
| format = kFormatXRGB2101010; |
| break; |
| case HAL_PIXEL_FORMAT_BGRA_1010102: |
| format = kFormatBGRA1010102; |
| break; |
| case HAL_PIXEL_FORMAT_ABGR_2101010: |
| format = kFormatABGR2101010; |
| break; |
| case HAL_PIXEL_FORMAT_BGRX_1010102: |
| format = kFormatBGRX1010102; |
| break; |
| case HAL_PIXEL_FORMAT_XBGR_2101010: |
| format = kFormatXBGR2101010; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_P010: |
| format = kFormatYCbCr420P010; |
| break; |
| case HAL_PIXEL_FORMAT_YCbCr_420_TP10_UBWC: |
| format = kFormatYCbCr420TP10Ubwc; |
| break; |
| default: |
| DLOGW("Unsupported format type = %d", source); |
| return kFormatInvalid; |
| } |
| |
| return format; |
| } |
| |
| void HWCDisplay::DumpInputBuffers() { |
| char dir_path[PATH_MAX]; |
| |
| if (!dump_frame_count_ || flush_ || !dump_input_layers_) { |
| return; |
| } |
| |
| snprintf(dir_path, sizeof(dir_path), "/data/misc/display/frame_dump_%s", GetDisplayString()); |
| |
| if (mkdir(dir_path, 0777) != 0 && errno != EEXIST) { |
| DLOGW("Failed to create %s directory errno = %d, desc = %s", dir_path, errno, strerror(errno)); |
| return; |
| } |
| |
| // if directory exists already, need to explicitly change the permission. |
| if (errno == EEXIST && chmod(dir_path, 0777) != 0) { |
| DLOGW("Failed to change permissions on %s directory", dir_path); |
| return; |
| } |
| |
| for (uint32_t i = 0; i < layer_stack_.layers.size(); i++) { |
| auto layer = layer_stack_.layers.at(i); |
| const private_handle_t *pvt_handle = |
| reinterpret_cast<const private_handle_t *>(layer->input_buffer.buffer_id); |
| auto acquire_fence_fd = layer->input_buffer.acquire_fence_fd; |
| |
| if (acquire_fence_fd >= 0) { |
| int error = sync_wait(acquire_fence_fd, 1000); |
| if (error < 0) { |
| DLOGW("sync_wait error errno = %d, desc = %s", errno, strerror(errno)); |
| return; |
| } |
| } |
| |
| if (pvt_handle && pvt_handle->base) { |
| char dump_file_name[PATH_MAX]; |
| size_t result = 0; |
| |
| snprintf(dump_file_name, sizeof(dump_file_name), "%s/input_layer%d_%dx%d_%s_frame%d.raw", |
| dir_path, i, pvt_handle->width, pvt_handle->height, |
| qdutils::GetHALPixelFormatString(pvt_handle->format), dump_frame_index_); |
| |
| FILE *fp = fopen(dump_file_name, "w+"); |
| if (fp) { |
| result = fwrite(reinterpret_cast<void *>(pvt_handle->base), pvt_handle->size, 1, fp); |
| fclose(fp); |
| } |
| |
| DLOGI("Frame Dump %s: is %s", dump_file_name, result ? "Successful" : "Failed"); |
| } |
| } |
| } |
| |
| void HWCDisplay::DumpOutputBuffer(const BufferInfo &buffer_info, void *base, int fence) { |
| char dir_path[PATH_MAX]; |
| |
| snprintf(dir_path, sizeof(dir_path), "/data/misc/display/frame_dump_%s", GetDisplayString()); |
| |
| if (mkdir(dir_path, 777) != 0 && errno != EEXIST) { |
| DLOGW("Failed to create %s directory errno = %d, desc = %s", dir_path, errno, strerror(errno)); |
| return; |
| } |
| |
| // if directory exists already, need to explicitly change the permission. |
| if (errno == EEXIST && chmod(dir_path, 0777) != 0) { |
| DLOGW("Failed to change permissions on %s directory", dir_path); |
| return; |
| } |
| |
| if (base) { |
| char dump_file_name[PATH_MAX]; |
| size_t result = 0; |
| |
| if (fence >= 0) { |
| int error = sync_wait(fence, 1000); |
| if (error < 0) { |
| DLOGW("sync_wait error errno = %d, desc = %s", errno, strerror(errno)); |
| return; |
| } |
| } |
| |
| snprintf(dump_file_name, sizeof(dump_file_name), "%s/output_layer_%dx%d_%s_frame%d.raw", |
| dir_path, buffer_info.buffer_config.width, buffer_info.buffer_config.height, |
| GetFormatString(buffer_info.buffer_config.format), dump_frame_index_); |
| |
| FILE *fp = fopen(dump_file_name, "w+"); |
| if (fp) { |
| result = fwrite(base, buffer_info.alloc_buffer_info.size, 1, fp); |
| fclose(fp); |
| } |
| |
| DLOGI("Frame Dump of %s is %s", dump_file_name, result ? "Successful" : "Failed"); |
| } |
| } |
| |
| const char *HWCDisplay::GetDisplayString() { |
| switch (type_) { |
| case kPrimary: |
| return "primary"; |
| case kHDMI: |
| return "hdmi"; |
| case kVirtual: |
| return "virtual"; |
| default: |
| return "invalid"; |
| } |
| } |
| |
| int HWCDisplay::SetFrameBufferResolution(uint32_t x_pixels, uint32_t y_pixels) { |
| if (x_pixels <= 0 || y_pixels <= 0) { |
| DLOGW("Unsupported config: x_pixels=%d, y_pixels=%d", x_pixels, y_pixels); |
| return -EINVAL; |
| } |
| |
| DisplayConfigVariableInfo fb_config; |
| DisplayError error = display_intf_->GetFrameBufferConfig(&fb_config); |
| if (error != kErrorNone) { |
| DLOGV("Get frame buffer config failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| fb_config.x_pixels = x_pixels; |
| fb_config.y_pixels = y_pixels; |
| |
| error = display_intf_->SetFrameBufferConfig(fb_config); |
| if (error != kErrorNone) { |
| DLOGV("Set frame buffer config failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| // Create rects to represent the new source and destination crops |
| LayerRect crop = LayerRect(0, 0, FLOAT(x_pixels), FLOAT(y_pixels)); |
| LayerRect dst = LayerRect(0, 0, FLOAT(fb_config.x_pixels), FLOAT(fb_config.y_pixels)); |
| auto client_target_layer = client_target_->GetSDMLayer(); |
| client_target_layer->src_rect = crop; |
| client_target_layer->dst_rect = dst; |
| |
| int aligned_width; |
| int aligned_height; |
| int usage = GRALLOC_USAGE_HW_FB; |
| int format = HAL_PIXEL_FORMAT_RGBA_8888; |
| int ubwc_enabled = 0; |
| int flags = 0; |
| HWCDebugHandler::Get()->GetProperty("debug.gralloc.enable_fb_ubwc", &ubwc_enabled); |
| if (ubwc_enabled == 1) { |
| usage |= GRALLOC_USAGE_PRIVATE_ALLOC_UBWC; |
| flags |= private_handle_t::PRIV_FLAGS_UBWC_ALIGNED; |
| } |
| AdrenoMemInfo::getInstance().getAlignedWidthAndHeight(INT(x_pixels), INT(y_pixels), format, usage, |
| aligned_width, aligned_height); |
| |
| // TODO(user): How does the dirty region get set on the client target? File bug on Google |
| client_target_layer->composition = kCompositionGPUTarget; |
| client_target_layer->input_buffer.format = GetSDMFormat(format, flags); |
| client_target_layer->input_buffer.width = UINT32(aligned_width); |
| client_target_layer->input_buffer.height = UINT32(aligned_height); |
| client_target_layer->input_buffer.unaligned_width = x_pixels; |
| client_target_layer->input_buffer.unaligned_height = y_pixels; |
| client_target_layer->plane_alpha = 255; |
| |
| DLOGI("New framebuffer resolution (%dx%d)", fb_config.x_pixels, fb_config.y_pixels); |
| |
| return 0; |
| } |
| |
| void HWCDisplay::GetFrameBufferResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| DisplayConfigVariableInfo fb_config; |
| display_intf_->GetFrameBufferConfig(&fb_config); |
| |
| *x_pixels = fb_config.x_pixels; |
| *y_pixels = fb_config.y_pixels; |
| } |
| |
| DisplayError HWCDisplay::GetMixerResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| return display_intf_->GetMixerResolution(x_pixels, y_pixels); |
| } |
| |
| void HWCDisplay::GetPanelResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| DisplayConfigVariableInfo display_config; |
| uint32_t active_index = 0; |
| |
| display_intf_->GetActiveConfig(&active_index); |
| display_intf_->GetConfig(active_index, &display_config); |
| |
| *x_pixels = display_config.x_pixels; |
| *y_pixels = display_config.y_pixels; |
| } |
| |
| int HWCDisplay::SetDisplayStatus(uint32_t display_status) { |
| int status = 0; |
| |
| switch (display_status) { |
| case kDisplayStatusResume: |
| display_paused_ = false; |
| case kDisplayStatusOnline: |
| status = INT32(SetPowerMode(HWC2::PowerMode::On)); |
| break; |
| case kDisplayStatusPause: |
| display_paused_ = true; |
| case kDisplayStatusOffline: |
| status = INT32(SetPowerMode(HWC2::PowerMode::Off)); |
| break; |
| default: |
| DLOGW("Invalid display status %d", display_status); |
| return -EINVAL; |
| } |
| |
| if (display_status == kDisplayStatusResume || display_status == kDisplayStatusPause) { |
| callbacks_->Refresh(HWC_DISPLAY_PRIMARY); |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplay::SetCursorPosition(hwc2_layer_t layer, int x, int y) { |
| if (shutdown_pending_) { |
| return HWC2::Error::None; |
| } |
| |
| // TODO(user): Validate layer |
| // TODO(user): Check if we're in a validate/present cycle |
| |
| auto error = display_intf_->SetCursorPosition(x, y); |
| if (error != kErrorNone) { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| |
| DLOGE("Failed for x = %d y = %d, Error = %d", x, y, error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| int HWCDisplay::OnMinHdcpEncryptionLevelChange(uint32_t min_enc_level) { |
| DisplayError error = display_intf_->OnMinHdcpEncryptionLevelChange(min_enc_level); |
| if (error != kErrorNone) { |
| DLOGE("Failed. Error = %d", error); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| void HWCDisplay::MarkLayersForGPUBypass() { |
| for (auto hwc_layer : layer_set_) { |
| auto layer = hwc_layer->GetSDMLayer(); |
| layer->composition = kCompositionSDE; |
| } |
| } |
| |
| void HWCDisplay::MarkLayersForClientComposition() { |
| // ClientComposition - GPU comp, to acheive this, set skip flag so that |
| // SDM does not handle this layer and hwc_layer composition will be |
| // set correctly at the end of Prepare. |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| layer->flags.skip = true; |
| } |
| } |
| |
| void HWCDisplay::ApplyScanAdjustment(hwc_rect_t *display_frame) { |
| } |
| |
| int HWCDisplay::SetPanelBrightness(int level) { |
| int ret = 0; |
| if (display_intf_) |
| ret = display_intf_->SetPanelBrightness(level); |
| else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| int HWCDisplay::GetPanelBrightness(int *level) { |
| return display_intf_->GetPanelBrightness(level); |
| } |
| |
| int HWCDisplay::ToggleScreenUpdates(bool enable) { |
| display_paused_ = enable ? false : true; |
| callbacks_->Refresh(HWC_DISPLAY_PRIMARY); |
| return 0; |
| } |
| |
| int HWCDisplay::ColorSVCRequestRoute(const PPDisplayAPIPayload &in_payload, |
| PPDisplayAPIPayload *out_payload, |
| PPPendingParams *pending_action) { |
| int ret = 0; |
| |
| if (display_intf_) |
| ret = display_intf_->ColorSVCRequestRoute(in_payload, out_payload, pending_action); |
| else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| void HWCDisplay::SolidFillPrepare() { |
| if (solid_fill_enable_) { |
| if (solid_fill_layer_ == NULL) { |
| // Create a dummy layer here |
| solid_fill_layer_ = new Layer(); |
| } |
| uint32_t primary_width = 0, primary_height = 0; |
| GetMixerResolution(&primary_width, &primary_height); |
| |
| LayerBuffer *layer_buffer = &solid_fill_layer_->input_buffer; |
| layer_buffer->width = primary_width; |
| layer_buffer->height = primary_height; |
| layer_buffer->unaligned_width = primary_width; |
| layer_buffer->unaligned_height = primary_height; |
| layer_buffer->acquire_fence_fd = -1; |
| layer_buffer->release_fence_fd = -1; |
| |
| LayerRect rect; |
| rect.top = 0; rect.left = 0; |
| rect.right = primary_width; |
| rect.bottom = primary_height; |
| |
| solid_fill_layer_->composition = kCompositionGPU; |
| solid_fill_layer_->src_rect = rect; |
| solid_fill_layer_->dst_rect = rect; |
| |
| solid_fill_layer_->blending = kBlendingPremultiplied; |
| solid_fill_layer_->solid_fill_color = solid_fill_color_; |
| solid_fill_layer_->frame_rate = 60; |
| solid_fill_layer_->visible_regions.push_back(solid_fill_layer_->dst_rect); |
| solid_fill_layer_->flags.updating = 1; |
| solid_fill_layer_->flags.solid_fill = true; |
| } else { |
| // delete the dummy layer |
| delete solid_fill_layer_; |
| solid_fill_layer_ = NULL; |
| } |
| |
| if (solid_fill_enable_ && solid_fill_layer_) { |
| BuildSolidFillStack(); |
| MarkLayersForGPUBypass(); |
| } |
| |
| return; |
| } |
| |
| void HWCDisplay::SolidFillCommit() { |
| if (solid_fill_enable_ && solid_fill_layer_) { |
| LayerBuffer *layer_buffer = &solid_fill_layer_->input_buffer; |
| if (layer_buffer->release_fence_fd > 0) { |
| close(layer_buffer->release_fence_fd); |
| layer_buffer->release_fence_fd = -1; |
| } |
| if (layer_stack_.retire_fence_fd > 0) { |
| close(layer_stack_.retire_fence_fd); |
| layer_stack_.retire_fence_fd = -1; |
| } |
| } |
| } |
| |
| int HWCDisplay::GetVisibleDisplayRect(hwc_rect_t *visible_rect) { |
| if (!IsValid(display_rect_)) { |
| return -EINVAL; |
| } |
| |
| visible_rect->left = INT(display_rect_.left); |
| visible_rect->top = INT(display_rect_.top); |
| visible_rect->right = INT(display_rect_.right); |
| visible_rect->bottom = INT(display_rect_.bottom); |
| DLOGI("Dpy = %d Visible Display Rect(%d %d %d %d)", visible_rect->left, visible_rect->top, |
| visible_rect->right, visible_rect->bottom); |
| |
| return 0; |
| } |
| |
| void HWCDisplay::SetSecureDisplay(bool secure_display_active) { |
| secure_display_active_ = secure_display_active; |
| return; |
| } |
| |
| int HWCDisplay::SetActiveDisplayConfig(int config) { |
| return display_intf_->SetActiveConfig(UINT32(config)) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetActiveDisplayConfig(uint32_t *config) { |
| return display_intf_->GetActiveConfig(config) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetDisplayConfigCount(uint32_t *count) { |
| return display_intf_->GetNumVariableInfoConfigs(count) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetDisplayAttributesForConfig(int config, |
| DisplayConfigVariableInfo *display_attributes) { |
| return display_intf_->GetConfig(UINT32(config), display_attributes) == kErrorNone ? 0 : -1; |
| } |
| |
| bool HWCDisplay::SingleLayerUpdating(void) { |
| uint32_t updating_count = 0; |
| |
| for (uint i = 0; i < layer_stack_.layers.size(); i++) { |
| auto layer = layer_stack_.layers.at(i); |
| if (layer->flags.updating) { |
| updating_count++; |
| } |
| } |
| |
| return (updating_count == 1); |
| } |
| |
| bool HWCDisplay::IsLayerUpdating(const Layer *layer) { |
| // Layer should be considered updating if |
| // a) layer is in single buffer mode, or |
| // b) valid dirty_regions(android specific hint for updating status), or |
| // c) layer stack geometry has changed (TODO(user): Remove when SDM accepts |
| // geometry_changed as bit fields). |
| return (layer->flags.single_buffer || IsSurfaceUpdated(layer->dirty_regions) || |
| geometry_changes_); |
| } |
| |
| bool HWCDisplay::IsSurfaceUpdated(const std::vector<LayerRect> &dirty_regions) { |
| // based on dirty_regions determine if its updating |
| // dirty_rect count = 0 - whole layer - updating. |
| // dirty_rect count = 1 or more valid rects - updating. |
| // dirty_rect count = 1 with (0,0,0,0) - not updating. |
| return (dirty_regions.empty() || IsValid(dirty_regions.at(0))); |
| } |
| |
| uint32_t HWCDisplay::SanitizeRefreshRate(uint32_t req_refresh_rate) { |
| uint32_t refresh_rate = req_refresh_rate; |
| |
| if (refresh_rate < min_refresh_rate_) { |
| // Pick the next multiple of request which is within the range |
| refresh_rate = |
| (((min_refresh_rate_ / refresh_rate) + ((min_refresh_rate_ % refresh_rate) ? 1 : 0)) * |
| refresh_rate); |
| } |
| |
| if (refresh_rate > max_refresh_rate_) { |
| refresh_rate = max_refresh_rate_; |
| } |
| |
| return refresh_rate; |
| } |
| |
| DisplayClass HWCDisplay::GetDisplayClass() { |
| return display_class_; |
| } |
| |
| void HWCDisplay::CloseAcquireFds() { |
| for (auto hwc_layer : layer_set_) { |
| auto layer = hwc_layer->GetSDMLayer(); |
| if (layer->input_buffer.acquire_fence_fd >= 0) { |
| close(layer->input_buffer.acquire_fence_fd); |
| layer->input_buffer.acquire_fence_fd = -1; |
| } |
| } |
| int32_t &client_target_acquire_fence = |
| client_target_->GetSDMLayer()->input_buffer.acquire_fence_fd; |
| if (client_target_acquire_fence >= 0) { |
| close(client_target_acquire_fence); |
| client_target_acquire_fence = -1; |
| } |
| } |
| |
| std::string HWCDisplay::Dump() { |
| std::ostringstream os; |
| os << "-------------------------------" << std::endl; |
| os << "HWC2 LayerDump display_id: " << id_ << std::endl; |
| for (auto layer : layer_set_) { |
| auto sdm_layer = layer->GetSDMLayer(); |
| auto transform = sdm_layer->transform; |
| os << "-------------------------------" << std::endl; |
| os << "layer_id: " << layer->GetId() << std::endl; |
| os << "\tz: " << layer->GetZ() << std::endl; |
| os << "\tclient(SF) composition: " << |
| to_string(layer->GetClientRequestedCompositionType()).c_str() << std::endl; |
| os << "\tdevice(SDM) composition: " << |
| to_string(layer->GetDeviceSelectedCompositionType()).c_str() << std::endl; |
| os << "\tplane_alpha: " << std::to_string(sdm_layer->plane_alpha).c_str() << std::endl; |
| os << "\tformat: " << GetFormatString(sdm_layer->input_buffer.format) << std::endl; |
| os << "\ttransform: rot: " << transform.rotation << " flip_h: " << transform.flip_horizontal << |
| " flip_v: "<< transform.flip_vertical << std::endl; |
| os << "\tbuffer_id: " << std::hex << "0x" << sdm_layer->input_buffer.buffer_id << std::dec |
| << std::endl; |
| } |
| return os.str(); |
| } |
| } // namespace sdm |