| /* |
| * Copyright (c) 2014-2021, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Copyright 2015 The Android Open Source Project |
| * |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Changes from Qualcomm Innovation Center are provided under the following license: |
| * |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted (subject to the limitations in the |
| * disclaimer below) provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <cutils/properties.h> |
| #include <errno.h> |
| #include <math.h> |
| #include <sync/sync.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <utils/constants.h> |
| #include <utils/debug.h> |
| #include <utils/utils.h> |
| #include <utils/formats.h> |
| #include <utils/rect.h> |
| #include <vendor/qti/hardware/display/composer/3.0/IQtiComposerClient.h> |
| #include <QtiGralloc.h> |
| |
| #include <algorithm> |
| #include <iomanip> |
| #include <map> |
| #include <sstream> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include "hwc_display.h" |
| #include "hwc_debugger.h" |
| #include "hwc_tonemapper.h" |
| #include "hwc_session.h" |
| |
| #ifdef QTI_BSP |
| #include <hardware/display_defs.h> |
| #endif |
| |
| #define __CLASS__ "HWCDisplay" |
| |
| using aidl::android::hardware::graphics::common::StandardMetadataType; |
| namespace sdm { |
| |
| bool HWCDisplay::mmrm_restricted_ = false; |
| uint32_t HWCDisplay::throttling_refresh_rate_ = 60; |
| |
| bool NeedsToneMap(const LayerStack &layer_stack) { |
| for (Layer *layer : layer_stack.layers) { |
| if (layer->request.flags.tone_map) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool IsTimeAfterOrEqualVsyncTime(int64_t time, int64_t vsync_time) { |
| return ((vsync_time != INT64_MAX) && ((time - vsync_time) >= 0)); |
| } |
| |
| HWCColorMode::HWCColorMode(DisplayInterface *display_intf) : display_intf_(display_intf) {} |
| |
| HWC2::Error HWCColorMode::Init() { |
| PopulateColorModes(); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::DeInit() { |
| color_mode_map_.clear(); |
| return HWC2::Error::None; |
| } |
| |
| uint32_t HWCColorMode::GetColorModeCount() { |
| uint32_t count = UINT32(color_mode_map_.size()); |
| DLOGI("Supported color mode count = %d", count); |
| return std::max(1U, count); |
| } |
| |
| uint32_t HWCColorMode::GetRenderIntentCount(ColorMode mode) { |
| uint32_t count = UINT32(color_mode_map_[mode].size()); |
| DLOGI("mode: %d supported rendering intent count = %d", mode, count); |
| return std::max(1U, count); |
| } |
| |
| HWC2::Error HWCColorMode::GetColorModes(uint32_t *out_num_modes, ColorMode *out_modes) { |
| auto it = color_mode_map_.begin(); |
| *out_num_modes = std::min(*out_num_modes, UINT32(color_mode_map_.size())); |
| for (uint32_t i = 0; i < *out_num_modes; it++, i++) { |
| out_modes[i] = it->first; |
| DLOGI("Color mode = %d is supported", out_modes[i]); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::GetRenderIntents(ColorMode mode, uint32_t *out_num_intents, |
| RenderIntent *out_intents) { |
| if (color_mode_map_.find(mode) == color_mode_map_.end()) { |
| return HWC2::Error::BadParameter; |
| } |
| auto it = color_mode_map_[mode].begin(); |
| *out_num_intents = std::min(*out_num_intents, UINT32(color_mode_map_[mode].size())); |
| for (uint32_t i = 0; i < *out_num_intents; it++, i++) { |
| out_intents[i] = it->first; |
| DLOGI("Color mode = %d is supported with render intent = %d", mode, out_intents[i]); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::ValidateColorModeWithRenderIntent(ColorMode mode, RenderIntent intent) { |
| if (mode < ColorMode::NATIVE || mode > ColorMode::DISPLAY_BT2020) { |
| DLOGE("Invalid mode: %d", mode); |
| return HWC2::Error::BadParameter; |
| } |
| if (color_mode_map_.find(mode) == color_mode_map_.end()) { |
| DLOGE("Could not find mode: %d", mode); |
| return HWC2::Error::Unsupported; |
| } |
| if (color_mode_map_[mode].find(intent) == color_mode_map_[mode].end()) { |
| DLOGE("Could not find render intent %d in mode %d", intent, mode); |
| return HWC2::Error::Unsupported; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorModeWithRenderIntent(ColorMode mode, RenderIntent intent) { |
| DTRACE_SCOPED(); |
| HWC2::Error hwc_error = ValidateColorModeWithRenderIntent(mode, intent); |
| if (hwc_error != HWC2::Error::None) { |
| return hwc_error; |
| } |
| |
| if (current_color_mode_ == mode && current_render_intent_ == intent) { |
| return HWC2::Error::None; |
| } |
| |
| auto mode_string = color_mode_map_[mode][intent][kSdrType]; |
| DisplayError error = display_intf_->SetColorMode(mode_string); |
| if (error != kErrorNone) { |
| DLOGE("failed for mode = %d intent = %d name = %s", mode, intent, mode_string.c_str()); |
| return HWC2::Error::Unsupported; |
| } |
| // The mode does not have the PCC configured, restore the transform |
| RestoreColorTransform(); |
| |
| current_color_mode_ = mode; |
| current_render_intent_ = intent; |
| DLOGV_IF(kTagClient, "Successfully applied mode = %d intent = %d name = %s", mode, intent, |
| mode_string.c_str()); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::CacheColorModeWithRenderIntent(ColorMode mode, RenderIntent intent) { |
| HWC2::Error error = ValidateColorModeWithRenderIntent(mode, intent); |
| if (error != HWC2::Error::None) { |
| return error; |
| } |
| |
| if (current_color_mode_ == mode && current_render_intent_ == intent) { |
| return HWC2::Error::None; |
| } |
| |
| current_color_mode_ = mode; |
| current_render_intent_ = intent; |
| apply_mode_ = true; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::ApplyCurrentColorModeWithRenderIntent(bool hdr_present) { |
| // If panel does not support color modes, do not set color mode. |
| if (color_mode_map_.size() <= 1) { |
| return HWC2::Error::None; |
| } |
| if (!apply_mode_) { |
| if ((hdr_present && curr_dynamic_range_ == kHdrType) || |
| (!hdr_present && curr_dynamic_range_ == kSdrType)) |
| return HWC2::Error::None; |
| } |
| |
| apply_mode_ = false; |
| curr_dynamic_range_ = (hdr_present)? kHdrType : kSdrType; |
| |
| // select mode according to the blend space and dynamic range |
| std::string mode_string = preferred_mode_[current_color_mode_][curr_dynamic_range_]; |
| if (mode_string.empty()) { |
| mode_string = color_mode_map_[current_color_mode_][current_render_intent_][curr_dynamic_range_]; |
| if (mode_string.empty() && hdr_present) { |
| // Use the colorimetric HDR mode, if an HDR mode with the current render intent is not present |
| mode_string = color_mode_map_[current_color_mode_][RenderIntent::COLORIMETRIC][kHdrType]; |
| } |
| if (mode_string.empty() && |
| (current_color_mode_ == ColorMode::DISPLAY_P3 || |
| current_color_mode_ == ColorMode::DISPLAY_BT2020 || |
| current_color_mode_ == ColorMode::NATIVE) && |
| curr_dynamic_range_ == kHdrType) { |
| // fall back to display_p3/display_bt2020/native SDR mode if there is no HDR mode |
| mode_string = color_mode_map_[current_color_mode_][current_render_intent_][kSdrType]; |
| } |
| |
| if (mode_string.empty() && |
| (current_color_mode_ == ColorMode::BT2100_PQ) && (curr_dynamic_range_ == kSdrType)) { |
| // fallback to hdr mode. |
| mode_string = color_mode_map_[current_color_mode_][current_render_intent_][kHdrType]; |
| DLOGI("fall back to hdr mode for ColorMode::BT2100_PQ kSdrType"); |
| } |
| } |
| |
| auto error = SetPreferredColorModeInternal(mode_string, false, NULL, NULL); |
| if (error == HWC2::Error::None) { |
| // The mode does not have the PCC configured, restore the transform |
| RestoreColorTransform(); |
| DLOGV_IF(kTagClient, "Successfully applied mode = %d intent = %d range = %d name = %s", |
| current_color_mode_, current_render_intent_, curr_dynamic_range_, mode_string.c_str()); |
| } else { |
| DLOGE("Failed to apply mode = %d intent = %d range = %d name = %s", |
| current_color_mode_, current_render_intent_, curr_dynamic_range_, mode_string.c_str()); |
| } |
| |
| return error; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorModeById(int32_t color_mode_id) { |
| DLOGI("Applying mode: %d", color_mode_id); |
| DisplayError error = display_intf_->SetColorModeById(color_mode_id); |
| if (error != kErrorNone) { |
| DLOGI_IF(kTagClient, "Failed to apply mode: %d", color_mode_id); |
| return HWC2::Error::BadParameter; |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::SetPreferredColorModeInternal(const std::string &mode_string, |
| bool from_client, ColorMode *color_mode, DynamicRangeType *dynamic_range) { |
| DisplayError error = kErrorNone; |
| ColorMode mode = ColorMode::NATIVE; |
| DynamicRangeType range = kSdrType; |
| |
| if (from_client) { |
| // get blend space and dynamic range of the mode |
| AttrVal attr; |
| std::string color_gamut_string, dynamic_range_string; |
| error = display_intf_->GetColorModeAttr(mode_string, &attr); |
| if (error) { |
| DLOGE("Failed to get mode attributes for mode %s", mode_string.c_str()); |
| return HWC2::Error::BadParameter; |
| } |
| |
| if (!attr.empty()) { |
| for (auto &it : attr) { |
| if (it.first.find(kColorGamutAttribute) != std::string::npos) { |
| color_gamut_string = it.second; |
| } else if (it.first.find(kDynamicRangeAttribute) != std::string::npos) { |
| dynamic_range_string = it.second; |
| } |
| } |
| } |
| |
| if (color_gamut_string.empty() || dynamic_range_string.empty()) { |
| DLOGE("Invalid attributes for mode %s: color_gamut = %s, dynamic_range = %s", |
| mode_string.c_str(), color_gamut_string.c_str(), dynamic_range_string.c_str()); |
| return HWC2::Error::BadParameter; |
| } |
| |
| if (color_gamut_string == kDcip3) { |
| mode = ColorMode::DISPLAY_P3; |
| } else if (color_gamut_string == kSrgb) { |
| mode = ColorMode::SRGB; |
| } |
| if (dynamic_range_string == kHdr) { |
| range = kHdrType; |
| } |
| |
| if (color_mode) { |
| *color_mode = mode; |
| } |
| if (dynamic_range) { |
| *dynamic_range = range; |
| } |
| } |
| |
| // apply the mode from client if it matches |
| // the current blend space and dynamic range, |
| // skip the check for the mode from SF. |
| if ((!from_client) || (current_color_mode_ == mode && curr_dynamic_range_ == range)) { |
| DLOGI("Applying mode: %s", mode_string.c_str()); |
| error = display_intf_->SetColorMode(mode_string); |
| if (error != kErrorNone) { |
| DLOGE("Failed to apply mode: %s", mode_string.c_str()); |
| return HWC2::Error::BadParameter; |
| } |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorModeFromClientApi(std::string mode_string) { |
| ColorMode mode = ColorMode::NATIVE; |
| DynamicRangeType range = kSdrType; |
| |
| auto error = SetPreferredColorModeInternal(mode_string, true, &mode, &range); |
| if (error == HWC2::Error::None) { |
| preferred_mode_[mode][range] = mode_string; |
| DLOGV_IF(kTagClient, "Put mode %s(mode %d, range %d) into preferred_mode", |
| mode_string.c_str(), mode, range); |
| } |
| |
| return error; |
| } |
| |
| HWC2::Error HWCColorMode::RestoreColorTransform() { |
| DisplayError error = display_intf_->SetColorTransform(kColorTransformMatrixCount, color_matrix_); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set Color Transform"); |
| return HWC2::Error::BadParameter; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCColorMode::SetColorTransform(const float *matrix, |
| android_color_transform_t /*hint*/) { |
| DTRACE_SCOPED(); |
| auto status = HWC2::Error::None; |
| double color_matrix[kColorTransformMatrixCount] = {0}; |
| CopyColorTransformMatrix(matrix, color_matrix); |
| |
| DisplayError error = display_intf_->SetColorTransform(kColorTransformMatrixCount, color_matrix); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set Color Transform Matrix"); |
| status = HWC2::Error::Unsupported; |
| } |
| CopyColorTransformMatrix(matrix, color_matrix_); |
| return status; |
| } |
| |
| void HWCColorMode::PopulateColorModes() { |
| uint32_t color_mode_count = 0; |
| // SDM returns modes which have attributes defining mode and rendering intent |
| DisplayError error = display_intf_->GetColorModeCount(&color_mode_count); |
| if (error != kErrorNone || (color_mode_count == 0)) { |
| DLOGW("GetColorModeCount failed, use native color mode"); |
| color_mode_map_[ColorMode::NATIVE][RenderIntent::COLORIMETRIC] |
| [kSdrType] = "hal_native_identity"; |
| return; |
| } |
| |
| DLOGV_IF(kTagClient, "Color Modes supported count = %d", color_mode_count); |
| |
| std::vector<std::string> color_modes(color_mode_count); |
| error = display_intf_->GetColorModes(&color_mode_count, &color_modes); |
| for (uint32_t i = 0; i < color_mode_count; i++) { |
| std::string &mode_string = color_modes.at(i); |
| DLOGV_IF(kTagClient, "Color Mode[%d] = %s", i, mode_string.c_str()); |
| AttrVal attr; |
| error = display_intf_->GetColorModeAttr(mode_string, &attr); |
| std::string color_gamut = kNative, dynamic_range = kSdr, pic_quality = kStandard, transfer; |
| int int_render_intent = -1; |
| if (!attr.empty()) { |
| for (auto &it : attr) { |
| if (it.first.find(kColorGamutAttribute) != std::string::npos) { |
| color_gamut = it.second; |
| } else if (it.first.find(kDynamicRangeAttribute) != std::string::npos) { |
| dynamic_range = it.second; |
| } else if (it.first.find(kPictureQualityAttribute) != std::string::npos) { |
| pic_quality = it.second; |
| } else if (it.first.find(kGammaTransferAttribute) != std::string::npos) { |
| transfer = it.second; |
| } else if (it.first.find(kRenderIntentAttribute) != std::string::npos) { |
| int_render_intent = std::stoi(it.second); |
| } |
| } |
| |
| if (int_render_intent < 0 || int_render_intent > MAX_EXTENDED_RENDER_INTENT) { |
| DLOGW("Invalid render intent %d for mode %s", int_render_intent, mode_string.c_str()); |
| continue; |
| } |
| DLOGV_IF(kTagClient, "color_gamut : %s, dynamic_range : %s, pic_quality : %s, " |
| "render_intent : %d", color_gamut.c_str(), dynamic_range.c_str(), |
| pic_quality.c_str(), int_render_intent); |
| |
| auto render_intent = static_cast<RenderIntent>(int_render_intent); |
| if (color_gamut == kNative) { |
| color_mode_map_[ColorMode::NATIVE][render_intent][kSdrType] = mode_string; |
| } |
| |
| if (color_gamut == kSrgb && dynamic_range == kSdr) { |
| color_mode_map_[ColorMode::SRGB][render_intent][kSdrType] = mode_string; |
| } |
| |
| if (color_gamut == kDcip3 && dynamic_range == kSdr) { |
| color_mode_map_[ColorMode::DISPLAY_P3][render_intent][kSdrType] = mode_string; |
| } |
| if (color_gamut == kDcip3 && dynamic_range == kHdr) { |
| if (display_intf_->IsSupportSsppTonemap()) { |
| color_mode_map_[ColorMode::DISPLAY_P3][render_intent][kHdrType] = mode_string; |
| } else if (pic_quality == kStandard) { |
| color_mode_map_[ColorMode::BT2100_PQ][render_intent] |
| [kHdrType] = mode_string; |
| color_mode_map_[ColorMode::BT2100_HLG][render_intent] |
| [kHdrType] = mode_string; |
| } |
| } else if (color_gamut == kBt2020) { |
| if (transfer == kSt2084) { |
| color_mode_map_[ColorMode::BT2100_PQ][RenderIntent::COLORIMETRIC] |
| [kHdrType] = mode_string; |
| } else if (transfer == kHlg) { |
| color_mode_map_[ColorMode::BT2100_HLG][RenderIntent::COLORIMETRIC] |
| [kHdrType] = mode_string; |
| } else if (transfer == kSrgb) { |
| color_mode_map_[ColorMode::DISPLAY_BT2020][RenderIntent::COLORIMETRIC] |
| [kSdrType] = mode_string; |
| } |
| } |
| } else { |
| // Look at the mode names, if no attributes are found |
| if (mode_string.find("hal_native") != std::string::npos) { |
| color_mode_map_[ColorMode::NATIVE][RenderIntent::COLORIMETRIC] |
| [kSdrType] = mode_string; |
| } |
| } |
| } |
| } |
| |
| void HWCColorMode::Dump(std::ostringstream* os) { |
| *os << "color modes supported: \n"; |
| for (auto it : color_mode_map_) { |
| *os << "mode: " << static_cast<int32_t>(it.first) << " RIs { "; |
| for (auto render_intent_it : color_mode_map_[it.first]) { |
| *os << static_cast<int32_t>(render_intent_it.first) << " dynamic_range [ "; |
| for (auto range_it : color_mode_map_[it.first][render_intent_it.first]) { |
| *os << static_cast<int32_t>(range_it.first) << " "; |
| } |
| *os << "] "; |
| } |
| *os << "} \n"; |
| } |
| *os << "current mode: " << static_cast<uint32_t>(current_color_mode_) << std::endl; |
| *os << "current render_intent: " << static_cast<uint32_t>(current_render_intent_) << std::endl; |
| if (curr_dynamic_range_ == kHdrType) { |
| *os << "current dynamic_range: HDR" << std::endl; |
| } else { |
| *os << "current dynamic_range: SDR" << std::endl; |
| } |
| *os << "current transform: "; |
| for (uint32_t i = 0; i < kColorTransformMatrixCount; i++) { |
| if (i % 4 == 0) { |
| *os << std::endl; |
| } |
| *os << std::fixed << std::setprecision(2) << std::setw(6) << std::setfill(' ') |
| << color_matrix_[i] << " "; |
| } |
| *os << std::endl; |
| } |
| |
| HWCDisplay::HWCDisplay(CoreInterface *core_intf, BufferAllocator *buffer_allocator, |
| HWCCallbacks *callbacks, HWCDisplayEventHandler* event_handler, |
| qService::QService *qservice, DisplayType type, hwc2_display_t id, |
| int32_t sdm_id, DisplayClass display_class) |
| : core_intf_(core_intf), |
| callbacks_(callbacks), |
| event_handler_(event_handler), |
| type_(type), |
| id_(id), |
| sdm_id_(sdm_id), |
| qservice_(qservice), |
| display_class_(display_class) { |
| buffer_allocator_ = static_cast<HWCBufferAllocator *>(buffer_allocator); |
| } |
| |
| int HWCDisplay::Init() { |
| DisplayError error = kErrorNone; |
| |
| HWCDebugHandler::Get()->GetProperty(ENABLE_NULL_DISPLAY_PROP, &null_display_mode_); |
| HWCDebugHandler::Get()->GetProperty(ENABLE_ASYNC_POWERMODE, &async_power_mode_); |
| |
| if (null_display_mode_) { |
| DisplayNull *disp_null = new DisplayNull(); |
| disp_null->Init(); |
| layer_stack_.flags.use_metadata_refresh_rate = false; |
| display_intf_ = disp_null; |
| DLOGI("Enabling null display mode for display type %d", type_); |
| } else { |
| error = core_intf_->CreateDisplay(sdm_id_, this, &display_intf_); |
| if (error != kErrorNone) { |
| if (kErrorDeviceRemoved == error) { |
| DLOGW("Display creation cancelled. Display %d-%d removed.", sdm_id_, type_); |
| return -ENODEV; |
| } else { |
| DLOGE("Display create failed. Error = %d display_id = %d event_handler = %p disp_intf = %p", |
| error, sdm_id_, this, &display_intf_); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| HWCDebugHandler::Get()->GetProperty(DISABLE_HDR, &disable_hdr_handling_); |
| if (disable_hdr_handling_) { |
| DLOGI("HDR Handling disabled"); |
| } |
| |
| HWCDebugHandler::Get()->GetProperty(DISABLE_SDR_HISTOGRAM, &disable_sdr_histogram_); |
| if (disable_sdr_histogram_) { |
| DLOGI("Non-HDR histogram handling disabled"); |
| } |
| |
| int property_swap_interval = 1; |
| HWCDebugHandler::Get()->GetProperty(ZERO_SWAP_INTERVAL, &property_swap_interval); |
| if (property_swap_interval == 0) { |
| swap_interval_zero_ = true; |
| } |
| |
| client_target_ = new HWCLayer(id_, buffer_allocator_); |
| |
| error = display_intf_->GetNumVariableInfoConfigs(&num_configs_); |
| if (error != kErrorNone) { |
| DLOGE("Getting config count failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| UpdateConfigs(); |
| |
| int enable_gpu_tonemapper = 0; |
| HWCDebugHandler::Get()->GetProperty(ENABLE_GPU_TONEMAPPER_PROP, &enable_gpu_tonemapper); |
| // Disable instantiating HWCTonemapper when GPU tonemapping is not used. |
| if (enable_gpu_tonemapper) { |
| tone_mapper_ = new HWCToneMapper(buffer_allocator_); |
| } |
| |
| display_intf_->GetQsyncFps(&qsync_fps_); |
| |
| display_intf_->GetRefreshRateRange(&min_refresh_rate_, &max_refresh_rate_); |
| current_refresh_rate_ = max_refresh_rate_; |
| |
| GetUnderScanConfig(); |
| |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| is_cmd_mode_ = fixed_info.is_cmdmode; |
| |
| game_supported_ = display_intf_->GameEnhanceSupported(); |
| |
| DLOGI("Display created with id: %d, game_supported_: %d", UINT32(id_), game_supported_); |
| |
| return 0; |
| } |
| |
| void HWCDisplay::UpdateConfigs() { |
| // SF doesnt care about dynamic bit clk support. |
| // Exposing all configs will result in getting/setting of redundant configs. |
| |
| // For each config store the corresponding index which client understands. |
| hwc_config_map_.resize(num_configs_); |
| |
| for (uint32_t i = 0; i < num_configs_; i++) { |
| DisplayConfigVariableInfo info = {}; |
| GetDisplayAttributesForConfig(INT(i), &info); |
| bool config_exists = false; |
| for (auto &config : variable_config_map_) { |
| if (config.second == info) { |
| config_exists = true; |
| hwc_config_map_.at(i) = config.first; |
| break; |
| } |
| } |
| |
| if (!config_exists) { |
| variable_config_map_[i] = info; |
| hwc_config_map_.at(i) = i; |
| } |
| } |
| |
| if (num_configs_ != 0) { |
| hwc2_config_t active_config = hwc_config_map_.at(0); |
| GetActiveConfig(&active_config); |
| SetActiveConfigIndex(active_config); |
| } |
| |
| // Update num config count. |
| num_configs_ = UINT32(variable_config_map_.size()); |
| DLOGI("num_configs = %d", num_configs_); |
| } |
| |
| int HWCDisplay::Deinit() { |
| if (null_display_mode_) { |
| delete static_cast<DisplayNull *>(display_intf_); |
| display_intf_ = nullptr; |
| } else { |
| DisplayError error = core_intf_->DestroyDisplay(display_intf_); |
| if (error != kErrorNone) { |
| DLOGE("Display destroy failed. Error = %d", error); |
| return -EINVAL; |
| } |
| } |
| |
| delete client_target_; |
| for (auto hwc_layer : layer_set_) { |
| delete hwc_layer; |
| } |
| |
| if (color_mode_) { |
| color_mode_->DeInit(); |
| delete color_mode_; |
| } |
| |
| if (tone_mapper_) { |
| delete tone_mapper_; |
| tone_mapper_ = nullptr; |
| } |
| |
| return 0; |
| } |
| |
| // LayerStack operations |
| HWC2::Error HWCDisplay::CreateLayer(hwc2_layer_t *out_layer_id) { |
| HWCLayer *layer = *layer_set_.emplace(new HWCLayer(id_, buffer_allocator_)); |
| if (disable_sdr_histogram_) |
| layer->IgnoreSdrHistogramMetadata(true); |
| |
| layer_map_.emplace(std::make_pair(layer->GetId(), layer)); |
| *out_layer_id = layer->GetId(); |
| geometry_changes_ |= GeometryChanges::kAdded; |
| layer_stack_invalid_ = true; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWCLayer *HWCDisplay::GetHWCLayer(hwc2_layer_t layer_id) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGW("[%" PRIu64 "] GetLayer(%" PRIu64 ") failed: no such layer", id_, layer_id); |
| return nullptr; |
| } else { |
| return map_layer->second; |
| } |
| } |
| |
| HWC2::Error HWCDisplay::DestroyLayer(hwc2_layer_t layer_id) { |
| // ToDo: Replace layer destroy with smart pointer. |
| // Work around to block main thread execution until async commit finishes. |
| display_intf_->DestroyLayer(); |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGW("[%" PRIu64 "] destroyLayer(%" PRIu64 ") failed: no such layer", id_, layer_id); |
| return HWC2::Error::BadLayer; |
| } |
| const auto layer = map_layer->second; |
| layer_map_.erase(map_layer); |
| const auto z_range = layer_set_.equal_range(layer); |
| for (auto current = z_range.first; current != z_range.second; ++current) { |
| if (*current == layer) { |
| current = layer_set_.erase(current); |
| delete layer; |
| break; |
| } |
| } |
| |
| geometry_changes_ |= GeometryChanges::kRemoved; |
| layer_stack_invalid_ = true; |
| |
| return HWC2::Error::None; |
| } |
| |
| static bool IsHDRLayerPresent(Layer *layer) { |
| if (layer->input_buffer.color_metadata.colorPrimaries == ColorPrimaries_BT2020 && |
| (layer->input_buffer.color_metadata.transfer == Transfer_SMPTE_ST2084 || |
| layer->input_buffer.color_metadata.transfer == Transfer_HLG)) { |
| return true; |
| } else if (IsExtendedRange(layer->input_buffer)) { |
| // Treat input format FP16 with extended range as HDR layer |
| return true; |
| } |
| return false; |
| } |
| |
| void HWCDisplay::BuildLayerStack() { |
| layer_stack_ = LayerStack(); |
| display_rect_ = LayerRect(); |
| layer_stack_.flags.use_metadata_refresh_rate = false; |
| layer_stack_.flags.animating = animating_; |
| layer_stack_.flags.layer_id_support = true; |
| layer_stack_.solid_fill_enabled = solid_fill_enable_; |
| layer_stack_.tonemapper_active = tone_mapper_ && tone_mapper_->IsActive(); |
| |
| DTRACE_SCOPED(); |
| // Add one layer for fb target |
| for (auto hwc_layer : layer_set_) { |
| // Reset layer data which SDM may change |
| hwc_layer->ResetPerFrameData(); |
| |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| layer->flags = {}; // Reset earlier flags |
| // Mark all layers to skip, when client target handle is NULL |
| if (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::Client || |
| !client_target_->GetSDMLayer()->input_buffer.buffer_id) { |
| layer->flags.skip = true; |
| } else if (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::SolidColor) { |
| layer->flags.solid_fill = true; |
| } |
| |
| if (!hwc_layer->IsDataSpaceSupported()) { |
| layer->flags.skip = true; |
| } |
| |
| if (swap_interval_zero_) { |
| layer->input_buffer.acquire_fence = nullptr; |
| } |
| |
| bool is_secure = false; |
| bool is_video = false; |
| void *hdl = reinterpret_cast<native_handle_t *>(layer->input_buffer.buffer_id); |
| if (hdl) { |
| int buffer_type; |
| gralloc::GetMetaDataValue(hdl, QTI_BUFFER_TYPE, &buffer_type); |
| if (buffer_type == BUFFER_TYPE_VIDEO) { |
| layer_stack_.flags.video_present = true; |
| is_video = true; |
| } |
| // TZ Protected Buffer - L1 |
| // Gralloc Usage Protected Buffer - L3 - which needs to be treated as Secure & avoid fallback |
| int32_t handle_flags; |
| gralloc::GetMetaDataValue(hdl, QTI_PRIVATE_FLAGS, &handle_flags); |
| if (handle_flags & qtigralloc::PRIV_FLAGS_SECURE_BUFFER) { |
| layer_stack_.flags.secure_present = true; |
| is_secure = true; |
| } |
| // UBWC PI format |
| if (handle_flags & qtigralloc::PRIV_FLAGS_UBWC_ALIGNED_PI) { |
| layer->input_buffer.flags.ubwc_pi = true; |
| } |
| } |
| |
| if (layer->input_buffer.flags.secure_display) { |
| layer_stack_.flags.secure_present = true; |
| is_secure = true; |
| } |
| |
| if (IS_RGB_FORMAT(layer->input_buffer.format) && hwc_layer->IsScalingPresent()) { |
| layer_stack_.flags.scaling_rgb_layer_present = true; |
| } |
| |
| if (hwc_layer->IsSingleBuffered() && |
| !(hwc_layer->IsRotationPresent() || hwc_layer->IsScalingPresent())) { |
| layer->flags.single_buffer = true; |
| layer_stack_.flags.single_buffered_layer_present = true; |
| } |
| |
| bool hdr_layer = IsHDRLayerPresent(layer); |
| if (hdr_layer && !disable_hdr_handling_) { |
| // Dont honor HDR when its handling is disabled |
| layer->input_buffer.flags.hdr = true; |
| layer_stack_.flags.hdr_present = true; |
| } |
| |
| if (game_supported_ && (hwc_layer->GetType() == kLayerGame) && !hdr_layer) { |
| layer->flags.is_game = true; |
| layer->input_buffer.flags.game = true; |
| } |
| |
| if (hwc_layer->IsNonIntegralSourceCrop() && !is_secure && !hdr_layer && |
| !layer->flags.single_buffer && !layer->flags.solid_fill && !is_video && |
| !layer->flags.is_game) { |
| layer->flags.skip = true; |
| } |
| |
| if (!layer->flags.skip && |
| (hwc_layer->GetClientRequestedCompositionType() == HWC2::Composition::Cursor)) { |
| // Currently we support only one HWCursor & only at top most z-order |
| if ((*layer_set_.rbegin())->GetId() == hwc_layer->GetId()) { |
| layer->flags.cursor = true; |
| layer_stack_.flags.cursor_present = true; |
| } |
| } |
| |
| if (layer->flags.skip) { |
| layer_stack_.flags.skip_present = true; |
| } |
| |
| // TODO(user): Move to a getter if this is needed at other places |
| hwc_rect_t scaled_display_frame = {INT(layer->dst_rect.left), INT(layer->dst_rect.top), |
| INT(layer->dst_rect.right), INT(layer->dst_rect.bottom)}; |
| if (hwc_layer->GetGeometryChanges() & kDisplayFrame) { |
| ApplyScanAdjustment(&scaled_display_frame); |
| } |
| hwc_layer->SetLayerDisplayFrame(scaled_display_frame); |
| hwc_layer->ResetPerFrameData(); |
| // SDM requires these details even for solid fill |
| if (layer->flags.solid_fill) { |
| LayerBuffer *layer_buffer = &layer->input_buffer; |
| layer_buffer->width = UINT32(layer->dst_rect.right - layer->dst_rect.left); |
| layer_buffer->height = UINT32(layer->dst_rect.bottom - layer->dst_rect.top); |
| layer_buffer->unaligned_width = layer_buffer->width; |
| layer_buffer->unaligned_height = layer_buffer->height; |
| layer->src_rect.left = 0; |
| layer->src_rect.top = 0; |
| layer->src_rect.right = layer_buffer->width; |
| layer->src_rect.bottom = layer_buffer->height; |
| } |
| |
| if (hwc_layer->HasMetaDataRefreshRate()) { |
| layer->flags.has_metadata_refresh_rate = true; |
| } |
| |
| display_rect_ = Union(display_rect_, layer->dst_rect); |
| geometry_changes_ |= hwc_layer->GetGeometryChanges(); |
| |
| layer->flags.updating = true; |
| if (layer_set_.size() <= kMaxLayerCount) { |
| layer->flags.updating = IsLayerUpdating(hwc_layer); |
| } |
| |
| if (hwc_layer->IsColorTransformSet()) { |
| layer->flags.color_transform = true; |
| } |
| |
| layer_stack_.flags.mask_present |= layer->input_buffer.flags.mask_layer; |
| |
| layer->flags.compatible = hwc_layer->IsLayerCompatible(); |
| |
| layer->layer_id = hwc_layer->GetId(); |
| layer->layer_name = hwc_layer->GetName(); |
| layer->geometry_changes = hwc_layer->GetGeometryChanges(); |
| layer_stack_.layers.push_back(layer); |
| } |
| |
| // TODO(user): Set correctly when SDM supports geometry_changes as bitmask |
| |
| layer_stack_.flags.geometry_changed = UINT32((geometry_changes_ || |
| geometry_changes_on_doze_suspend_) > 0); |
| layer_stack_.flags.advance_fb_present = client_target_3_1_set_; |
| // Append client target to the layer stack |
| Layer *sdm_client_target = client_target_->GetSDMLayer(); |
| sdm_client_target->layer_id = client_target_->GetId(); |
| sdm_client_target->geometry_changes = client_target_->GetGeometryChanges(); |
| sdm_client_target->flags.updating = IsLayerUpdating(client_target_); |
| sdm_client_target->layer_name = client_target_->GetName(); |
| |
| // Derive client target dataspace based on the color mode - bug/115482728 |
| int32_t client_target_dataspace = GetDataspaceFromColorMode(GetCurrentColorMode()); |
| SetClientTargetDataSpace(client_target_dataspace); |
| layer_stack_.layers.push_back(sdm_client_target); |
| |
| layer_stack_.elapse_timestamp = elapse_timestamp_; |
| |
| layer_stack_.client_incompatible = |
| dump_frame_count_ && (dump_output_to_file_ || dump_input_layers_); |
| DLOGV_IF(kTagClient, "layer_stack_.client_incompatible : %d", layer_stack_.client_incompatible); |
| ATRACE_INT("HDRPresent ", layer_stack_.flags.hdr_present ? 1 : 0); |
| } |
| |
| void HWCDisplay::BuildSolidFillStack() { |
| layer_stack_ = LayerStack(); |
| display_rect_ = LayerRect(); |
| |
| layer_stack_.layers.push_back(solid_fill_layer_); |
| layer_stack_.flags.geometry_changed = 1U; |
| // Append client target to the layer stack |
| layer_stack_.layers.push_back(client_target_->GetSDMLayer()); |
| |
| layer_stack_.client_incompatible = |
| dump_frame_count_ && (dump_output_to_file_ || dump_input_layers_); |
| DLOGV_IF(kTagClient, "layer_stack_.client_incompatible : %d", layer_stack_.client_incompatible); |
| } |
| |
| HWC2::Error HWCDisplay::SetLayerType(hwc2_layer_t layer_id, IQtiComposerClient::LayerType type) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGW("display [%" PRIu64"]-[%" PRIu64 "] SetLayerType (%" PRIu64 ") failed to find layer", |
| id_, type_, layer_id); |
| return HWC2::Error::BadLayer; |
| } |
| |
| const auto layer = map_layer->second; |
| layer->SetLayerType(type); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetLayerZOrder(hwc2_layer_t layer_id, uint32_t z) { |
| const auto map_layer = layer_map_.find(layer_id); |
| if (map_layer == layer_map_.end()) { |
| DLOGW("[%" PRIu64 "] updateLayerZ failed to find layer", id_); |
| return HWC2::Error::BadLayer; |
| } |
| |
| const auto layer = map_layer->second; |
| const auto z_range = layer_set_.equal_range(layer); |
| bool layer_on_display = false; |
| for (auto current = z_range.first; current != z_range.second; ++current) { |
| if (*current == layer) { |
| if ((*current)->GetZ() == z) { |
| // Don't change anything if the Z hasn't changed |
| return HWC2::Error::None; |
| } |
| current = layer_set_.erase(current); |
| layer_on_display = true; |
| break; |
| } |
| } |
| |
| if (!layer_on_display) { |
| DLOGE("[%" PRIu64 "] updateLayerZ failed to find layer on display", id_); |
| return HWC2::Error::BadLayer; |
| } |
| |
| layer->SetLayerZOrder(z); |
| layer_set_.emplace(layer); |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetVsyncEnabled(HWC2::Vsync enabled) { |
| DLOGV("Display ID: %" PRId64 " enabled: %s", id_, to_string(enabled).c_str()); |
| ATRACE_INT("SetVsyncState ", enabled == HWC2::Vsync::Enable ? 1 : 0); |
| DisplayError error = kErrorNone; |
| |
| if (shutdown_pending_ || |
| (!callbacks_->VsyncCallbackRegistered() && !callbacks_->Vsync_2_4CallbackRegistered())) { |
| return HWC2::Error::None; |
| } |
| |
| bool state; |
| if (enabled == HWC2::Vsync::Enable) |
| state = true; |
| else if (enabled == HWC2::Vsync::Disable) |
| state = false; |
| else |
| return HWC2::Error::BadParameter; |
| |
| error = display_intf_->SetVSyncState(state); |
| |
| if (error != kErrorNone) { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| DLOGE("Failed. enabled = %s, error = %d", to_string(enabled).c_str(), error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplay::PostPowerMode() { |
| if (release_fence_ == nullptr) { |
| return; |
| } |
| |
| for (auto hwc_layer : layer_set_) { |
| hwc_layer->SetReleaseFence(release_fence_); |
| } |
| } |
| |
| HWC2::Error HWCDisplay::SetPowerMode(HWC2::PowerMode mode, bool teardown) { |
| DLOGI("display = %" PRId64 ", mode = %s", id_, to_string(mode).c_str()); |
| DisplayState state = kStateOff; |
| bool flush_on_error = flush_on_error_; |
| |
| if (shutdown_pending_) { |
| return HWC2::Error::None; |
| } |
| |
| switch (mode) { |
| case HWC2::PowerMode::Off: |
| // During power off, all of the buffers are released. |
| // Do not flush until a buffer is successfully submitted again. |
| flush_on_error = false; |
| state = kStateOff; |
| if (tone_mapper_) { |
| tone_mapper_->Terminate(); |
| } |
| break; |
| case HWC2::PowerMode::On: |
| if (mmrm_restricted_ && (display_class_ != DISPLAY_CLASS_BUILTIN) && |
| (current_power_mode_ == HWC2::PowerMode::Off || |
| current_power_mode_ == HWC2::PowerMode::DozeSuspend)) { |
| return HWC2::Error::None; |
| } |
| RestoreColorTransform(); |
| state = kStateOn; |
| break; |
| case HWC2::PowerMode::Doze: |
| if (mmrm_restricted_ && (display_class_ != DISPLAY_CLASS_BUILTIN) && |
| (current_power_mode_ == HWC2::PowerMode::Off || |
| current_power_mode_ == HWC2::PowerMode::DozeSuspend)) { |
| return HWC2::Error::None; |
| } |
| RestoreColorTransform(); |
| state = kStateDoze; |
| break; |
| case HWC2::PowerMode::DozeSuspend: |
| state = kStateDozeSuspend; |
| break; |
| default: |
| return HWC2::Error::BadParameter; |
| } |
| shared_ptr<Fence> release_fence = nullptr; |
| |
| ATRACE_INT("SetPowerMode ", state); |
| DisplayError error = display_intf_->SetDisplayState(state, teardown, &release_fence); |
| |
| if (error == kErrorNone) { |
| flush_on_error_ = flush_on_error; |
| } else { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| DLOGE("Set state failed. Error = %d", error); |
| return HWC2::Error::BadParameter; |
| } |
| |
| // Update release fence. |
| release_fence_ = release_fence; |
| current_power_mode_ = mode; |
| |
| // Close the release fences in synchronous power updates |
| if (!async_power_mode_) { |
| PostPowerMode(); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetClientTargetSupport(uint32_t width, uint32_t height, int32_t format, |
| int32_t dataspace) { |
| ColorMetaData color_metadata = {}; |
| if (dataspace != HAL_DATASPACE_UNKNOWN) { |
| dataspace = TranslateFromLegacyDataspace(dataspace); |
| GetColorPrimary(dataspace, &(color_metadata.colorPrimaries)); |
| GetTransfer(dataspace, &(color_metadata.transfer)); |
| GetRange(dataspace, &(color_metadata.range)); |
| } |
| |
| LayerBufferFormat sdm_format = HWCLayer::GetSDMFormat(format, 0); |
| if (display_intf_->GetClientTargetSupport(width, height, sdm_format, |
| color_metadata) != kErrorNone) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetColorModes(uint32_t *out_num_modes, ColorMode *out_modes) { |
| if (out_modes == nullptr) { |
| *out_num_modes = 1; |
| } else if (out_modes && *out_num_modes > 0) { |
| *out_num_modes = 1; |
| out_modes[0] = ColorMode::NATIVE; |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetRenderIntents(ColorMode mode, uint32_t *out_num_intents, |
| RenderIntent *out_intents) { |
| if (mode != ColorMode::NATIVE) { |
| return HWC2::Error::Unsupported; |
| } |
| if (out_intents == nullptr) { |
| *out_num_intents = 1; |
| } else if (out_intents && *out_num_intents > 0) { |
| *out_num_intents = 1; |
| out_intents[0] = RenderIntent::COLORIMETRIC; |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayConfigs(uint32_t *out_num_configs, hwc2_config_t *out_configs) { |
| if (out_num_configs == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| if (out_configs == nullptr) { |
| *out_num_configs = num_configs_; |
| return HWC2::Error::None; |
| } |
| |
| *out_num_configs = std::min(*out_num_configs, num_configs_); |
| |
| // Expose all unique config ids to cleint. |
| uint32_t i = 0; |
| for (auto &info : variable_config_map_) { |
| if (i == *out_num_configs) { |
| break; |
| } |
| out_configs[i++] = info.first; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayAttribute(hwc2_config_t config, HwcAttribute attribute, |
| int32_t *out_value) { |
| if (variable_config_map_.find(config) == variable_config_map_.end()) { |
| DLOGE("Get variable config failed"); |
| return HWC2::Error::BadConfig; |
| } |
| |
| DisplayConfigVariableInfo variable_config = variable_config_map_.at(config); |
| |
| variable_config.x_pixels -= UINT32(window_rect_.right + window_rect_.left); |
| variable_config.y_pixels -= UINT32(window_rect_.bottom + window_rect_.top); |
| if (variable_config.x_pixels <= 0 || variable_config.y_pixels <= 0) { |
| DLOGE("window rects are not within the supported range"); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| switch (attribute) { |
| case HwcAttribute::VSYNC_PERIOD: |
| *out_value = INT32(variable_config.vsync_period_ns); |
| break; |
| case HwcAttribute::WIDTH: |
| *out_value = INT32(variable_config.x_pixels); |
| break; |
| case HwcAttribute::HEIGHT: |
| *out_value = INT32(variable_config.y_pixels); |
| break; |
| case HwcAttribute::DPI_X: |
| *out_value = INT32(variable_config.x_dpi * 1000.0f); |
| break; |
| case HwcAttribute::DPI_Y: |
| *out_value = INT32(variable_config.y_dpi * 1000.0f); |
| break; |
| case HwcAttribute::CONFIG_GROUP: |
| *out_value = GetDisplayConfigGroup(variable_config); |
| break; |
| default: |
| DLOGW("Spurious attribute type = %s", composer_V2_4::toString(attribute).c_str()); |
| *out_value = -1; |
| return HWC2::Error::BadParameter; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayName(uint32_t *out_size, char *out_name) { |
| // TODO(user): Get panel name and EDID name and populate it here |
| if (out_size == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| std::string name; |
| switch (type_) { |
| case kBuiltIn: |
| name = "Built-in Display"; |
| break; |
| case kPluggable: |
| name = "Pluggable Display"; |
| break; |
| case kVirtual: |
| name = "Virtual Display"; |
| break; |
| default: |
| name = "Unknown"; |
| break; |
| } |
| |
| if (out_name == nullptr) { |
| *out_size = UINT32(name.size()) + 1; |
| } else { |
| *out_size = std::min((UINT32(name.size()) + 1), *out_size); |
| if (*out_size > 0) { |
| strlcpy(out_name, name.c_str(), *out_size); |
| out_name[*out_size - 1] = '\0'; |
| } else { |
| DLOGW("Invalid size requested"); |
| } |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayType(int32_t *out_type) { |
| if (out_type == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| *out_type = HWC2_DISPLAY_TYPE_PHYSICAL; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetPerFrameMetadataKeys(uint32_t *out_num_keys, |
| PerFrameMetadataKey *out_keys) { |
| if (out_num_keys == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| uint32_t num_keys = 0; |
| if (fixed_info.hdr_plus_supported) { |
| num_keys = UINT32(PerFrameMetadataKey::HDR10_PLUS_SEI) + 1; |
| } else { |
| num_keys = UINT32(PerFrameMetadataKey::MAX_FRAME_AVERAGE_LIGHT_LEVEL) + 1; |
| } |
| if (out_keys == nullptr) { |
| *out_num_keys = num_keys; |
| } else { |
| uint32_t max_out_key_elements = std::min(*out_num_keys, num_keys); |
| for (int32_t i = 0; i < max_out_key_elements; i++) { |
| out_keys[i] = static_cast<PerFrameMetadataKey>(i); |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetActiveConfig(hwc2_config_t *out_config) { |
| if (out_config == nullptr) { |
| return HWC2::Error::BadDisplay; |
| } |
| |
| if (pending_config_) { |
| *out_config = pending_config_index_; |
| } else { |
| GetActiveDisplayConfig(out_config); |
| } |
| |
| if (*out_config < hwc_config_map_.size()) { |
| *out_config = hwc_config_map_.at(*out_config); |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetClientTarget(buffer_handle_t target, shared_ptr<Fence> acquire_fence, |
| int32_t dataspace, hwc_region_t damage) { |
| DTRACE_SCOPED(); |
| // TODO(user): SurfaceFlinger gives us a null pointer here when doing full SDE composition |
| // The error is problematic for layer caching as it would overwrite our cached client target. |
| // Reported bug 28569722 to resolve this. |
| // For now, continue to use the last valid buffer reported to us for layer caching. |
| if (target == nullptr) { |
| return HWC2::Error::None; |
| } |
| |
| if (acquire_fence == nullptr) { |
| DLOGV_IF(kTagClient, "Re-using cached buffer"); |
| } |
| |
| Layer *sdm_layer = client_target_->GetSDMLayer(); |
| sdm_layer->frame_rate = std::min(current_refresh_rate_, HWCDisplay::GetThrottlingRefreshRate()); |
| |
| SetClientTargetDataSpace(dataspace); |
| client_target_->SetLayerSurfaceDamage(damage); |
| client_target_->SetLayerBuffer(target, acquire_fence); |
| client_target_handle_ = target; |
| client_acquire_fence_ = acquire_fence; |
| client_dataspace_ = dataspace; |
| client_damage_region_ = damage; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetClientTarget(buffer_handle_t target, shared_ptr<Fence> acquire_fence, |
| int32_t dataspace, hwc_region_t damage) { |
| target = client_target_handle_; |
| acquire_fence = client_acquire_fence_; |
| dataspace = client_dataspace_; |
| damage = client_damage_region_; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetClientTarget_3_1(buffer_handle_t target, shared_ptr<Fence> acquire_fence, |
| int32_t dataspace, hwc_region_t damage) { |
| DTRACE_SCOPED(); |
| auto status = SetClientTarget(target, acquire_fence, dataspace, damage); |
| if (status != HWC2::Error::None) { |
| return status; |
| } |
| |
| client_target_3_1_set_ = true; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetActiveConfig(hwc2_config_t config) { |
| DTRACE_SCOPED(); |
| hwc2_config_t current_config = 0; |
| GetActiveConfig(¤t_config); |
| if (current_config == config) { |
| return HWC2::Error::None; |
| } |
| |
| if (!IsModeSwitchAllowed(config)) { |
| return HWC2::Error::BadConfig; |
| } |
| |
| // DRM driver expects DRM_PREFERRED_MODE to be set as part of first commit. |
| if (!IsFirstCommitDone()) { |
| // Store client's config. |
| // Set this as part of post commit. |
| pending_first_commit_config_ = true; |
| pending_first_commit_config_index_ = config; |
| DLOGI("Defer config change to %d until first commit", UINT32(config)); |
| return HWC2::Error::None; |
| } else if (pending_first_commit_config_) { |
| // Config override request from client. |
| // Honour latest request. |
| pending_first_commit_config_ = false; |
| } |
| |
| DLOGI("Active configuration changed to: %d", config); |
| |
| // Cache refresh rate set by client. |
| DisplayConfigVariableInfo info = {}; |
| GetDisplayAttributesForConfig(INT(config), &info); |
| active_refresh_rate_ = info.fps; |
| |
| // Store config index to be applied upon refresh. |
| pending_config_ = true; |
| pending_config_index_ = config; |
| |
| // Trigger refresh. This config gets applied on next commit. |
| callbacks_->Refresh(id_); |
| |
| return HWC2::Error::None; |
| } |
| |
| DisplayError HWCDisplay::SetMixerResolution(uint32_t width, uint32_t height) { |
| return kErrorNotSupported; |
| } |
| |
| HWC2::Error HWCDisplay::SetFrameDumpConfig(uint32_t count, uint32_t bit_mask_layer_type, |
| int32_t format) { |
| dump_frame_count_ = count; |
| dump_frame_index_ = 0; |
| dump_input_layers_ = ((bit_mask_layer_type & (1 << INPUT_LAYER_DUMP)) != 0); |
| |
| if (tone_mapper_) { |
| tone_mapper_->SetFrameDumpConfig(count); |
| } |
| |
| DLOGI("num_frame_dump %d, input_layer_dump_enable %d", dump_frame_count_, dump_input_layers_); |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetFrameDumpConfig(uint32_t count, uint32_t bit_mask_layer_type, |
| int32_t format, CwbConfig &cwb_config) { |
| bool dump_output_to_file = bit_mask_layer_type & (1 << OUTPUT_LAYER_DUMP); |
| DLOGI("Requested o/p dump enable = %d", dump_output_to_file); |
| |
| if (!count || (dump_output_to_file && (output_buffer_info_.alloc_buffer_info.fd >= 0))) { |
| DLOGW("FrameDump Not enabled Framecount = %d dump_output_to_file = %d o/p fd = %d", count, |
| dump_output_to_file, output_buffer_info_.alloc_buffer_info.fd); |
| return HWC2::Error::None; |
| } |
| |
| SetFrameDumpConfig(count, bit_mask_layer_type, format); |
| |
| if (!dump_output_to_file) { |
| // output(cwb) not requested, return |
| return HWC2::Error::None; |
| } |
| |
| // Allocate and map output buffer |
| const CwbTapPoint &tap_point = cwb_config.tap_point; |
| if (GetCwbBufferResolution(&cwb_config, &output_buffer_info_.buffer_config.width, |
| &output_buffer_info_.buffer_config.height)) { |
| DLOGW("Buffer Resolution setting failed."); |
| return HWC2::Error::BadConfig; |
| } |
| |
| DLOGV_IF(kTagQDCM, "CWB output buffer resolution: width:%d height:%d tap point:%s", |
| output_buffer_info_.buffer_config.width, output_buffer_info_.buffer_config.height, |
| UINT32(tap_point) ? (UINT32(tap_point) == 1) ? "DSPP" : "DEMURA" : "LM"); |
| |
| output_buffer_info_.buffer_config.format = HWCLayer::GetSDMFormat(format, 0); |
| output_buffer_info_.buffer_config.buffer_count = 1; |
| if (buffer_allocator_->AllocateBuffer(&output_buffer_info_) != 0) { |
| DLOGE("Buffer allocation failed"); |
| output_buffer_info_ = {}; |
| return HWC2::Error::NoResources; |
| } |
| |
| void *buffer = mmap(NULL, output_buffer_info_.alloc_buffer_info.size, PROT_READ | PROT_WRITE, |
| MAP_SHARED, output_buffer_info_.alloc_buffer_info.fd, 0); |
| |
| if (buffer == MAP_FAILED) { |
| DLOGE("mmap failed with err %d", errno); |
| buffer_allocator_->FreeBuffer(&output_buffer_info_); |
| output_buffer_info_ = {}; |
| dump_frame_count_ = 0; |
| return HWC2::Error::NoResources; |
| } |
| |
| const native_handle_t *handle = static_cast<native_handle_t *>(output_buffer_info_.private_data); |
| HWC2::Error err = SetReadbackBuffer(handle, nullptr, cwb_config, kCWBClientFrameDump); |
| if (err != HWC2::Error::None) { |
| munmap(output_buffer_base_, output_buffer_info_.alloc_buffer_info.size); |
| buffer_allocator_->FreeBuffer(&output_buffer_info_); |
| output_buffer_info_ = {}; |
| dump_frame_count_ = 0; |
| return err; |
| } |
| dump_output_to_file_ = dump_output_to_file; |
| output_buffer_base_ = buffer; |
| output_buffer_cwb_config_ = cwb_config; |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::PowerMode HWCDisplay::GetCurrentPowerMode() { |
| return current_power_mode_; |
| } |
| |
| DisplayError HWCDisplay::VSync(const DisplayEventVSync &vsync) { |
| if (callbacks_->Vsync_2_4CallbackRegistered()) { |
| VsyncPeriodNanos vsync_period; |
| if (GetDisplayVsyncPeriod(&vsync_period) != HWC2::Error::None) { |
| vsync_period = 0; |
| } |
| ATRACE_INT("VsyncPeriod", INT32(vsync_period)); |
| callbacks_->Vsync_2_4(id_, vsync.timestamp, vsync_period); |
| } else { |
| callbacks_->Vsync(id_, vsync.timestamp); |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::Refresh() { |
| callbacks_->Refresh(id_); |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::CECMessage(char *message) { |
| if (qservice_) { |
| qservice_->onCECMessageReceived(message, 0); |
| } else { |
| DLOGW("Qservice instance not available."); |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::HandleEvent(DisplayEvent event) { |
| switch (event) { |
| case kPanelDeadEvent: |
| case kDisplayPowerResetEvent: { |
| // TODO(user): Following scenario need to be addressed |
| // If panel or HW is in bad state for either ESD or HWR, there is no acquired lock between |
| // this scope and call to DisplayPowerReset. |
| // Prepare or commit could operate on the display since locker_[id_] is free and most likely |
| // result in a failure since ESD/HWR has been requested during this time period. |
| if (event_handler_) { |
| event_handler_->DisplayPowerReset(); |
| } else { |
| DLOGW("Cannot execute DisplayPowerReset (client_id = %" PRId64 "), event_handler_ is null", |
| id_); |
| } |
| } break; |
| case kPostIdleTimeout: |
| display_idle_ = true; |
| break; |
| case kVmReleaseDone: { |
| if (event_handler_) { |
| event_handler_->VmReleaseDone(id_); |
| } else { |
| DLOGW("Cannot execute VmReleaseDone (client_id = %" PRId64 "), event_handler_ is null", |
| id_); |
| } |
| } break; |
| case kIdleTimeout: |
| ReqPerfHintRelease(); |
| break; |
| default: |
| DLOGW("Unknown event: %d", event); |
| break; |
| } |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::HistogramEvent(int /* fd */, uint32_t /* blob_fd */) { |
| return kErrorNone; |
| } |
| |
| HWC2::Error HWCDisplay::PrepareLayerStack(uint32_t *out_num_types, uint32_t *out_num_requests) { |
| layer_changes_.clear(); |
| layer_requests_.clear(); |
| has_client_composition_ = false; |
| display_idle_ = false; |
| |
| DTRACE_SCOPED(); |
| if (shutdown_pending_) { |
| return HWC2::Error::BadDisplay; |
| } |
| |
| if (CanSkipSdmPrepare(out_num_types, out_num_requests)) { |
| return ((*out_num_types > 0) ? HWC2::Error::HasChanges : HWC2::Error::None); |
| } |
| |
| UpdateRefreshRate(); |
| UpdateActiveConfig(); |
| DisplayError error = display_intf_->Prepare(&layer_stack_); |
| auto status = HandlePrepareError(error); |
| if (status != HWC2::Error::None) { |
| return status; |
| } |
| |
| return PostPrepareLayerStack(out_num_types, out_num_requests); |
| } |
| |
| HWC2::Error HWCDisplay::HandlePrepareError(DisplayError error) { |
| if (error == kErrorNone || error == kErrorNeedsCommit) { |
| return HWC2::Error::None; |
| } |
| |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| } else if (error == kErrorPermission) { |
| WaitOnPreviousFence(); |
| MarkLayersForGPUBypass(); |
| geometry_changes_on_doze_suspend_ |= geometry_changes_; |
| } else { |
| DLOGW("Prepare failed. Error = %d", error); |
| // Prepare cycle can fail on a newly connected display if insufficient pipes |
| // are available at this moment. Trigger refresh so that the other displays |
| // can free up pipes and a valid content can be attached to virtual display. |
| callbacks_->Refresh(id_); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::PostPrepareLayerStack(uint32_t *out_num_types, uint32_t *out_num_requests) { |
| DTRACE_SCOPED(); |
| // clear geometry_changes_on_doze_suspend_ on successful prepare. |
| geometry_changes_on_doze_suspend_ = GeometryChanges::kNone; |
| |
| layer_changes_.clear(); |
| layer_requests_.clear(); |
| has_client_composition_ = false; |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| LayerComposition &composition = layer->composition; |
| |
| if (composition == kCompositionSDE || composition == kCompositionStitch) { |
| layer_requests_[hwc_layer->GetId()] = HWC2::LayerRequest::ClearClientTarget; |
| } |
| |
| HWC2::Composition requested_composition = hwc_layer->GetClientRequestedCompositionType(); |
| // Set SDM composition to HWC2 type in HWCLayer |
| hwc_layer->SetComposition(composition); |
| HWC2::Composition device_composition = hwc_layer->GetDeviceSelectedCompositionType(); |
| if (device_composition == HWC2::Composition::Client) { |
| has_client_composition_ = true; |
| } |
| // Update the changes list only if the requested composition is different from SDM comp type |
| if (requested_composition != device_composition) { |
| layer_changes_[hwc_layer->GetId()] = device_composition; |
| } |
| hwc_layer->ResetValidation(); |
| } |
| |
| client_target_->ResetValidation(); |
| *out_num_types = UINT32(layer_changes_.size()); |
| *out_num_requests = UINT32(layer_requests_.size()); |
| layer_stack_invalid_ = false; |
| |
| layer_stack_.client_incompatible = false; |
| |
| validate_done_ = true; |
| |
| return ((*out_num_types > 0) ? HWC2::Error::HasChanges : HWC2::Error::None); |
| } |
| |
| HWC2::Error HWCDisplay::AcceptDisplayChanges() { |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validate_done_) { |
| return HWC2::Error::NotValidated; |
| } |
| |
| for (const auto& change : layer_changes_) { |
| auto hwc_layer = layer_map_[change.first]; |
| auto composition = change.second; |
| if (hwc_layer != nullptr) { |
| hwc_layer->UpdateClientCompositionType(composition); |
| } else { |
| DLOGW("Invalid layer: %" PRIu64, change.first); |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetChangedCompositionTypes(uint32_t *out_num_elements, |
| hwc2_layer_t *out_layers, int32_t *out_types) { |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validate_done_) { |
| DLOGW("Display is not validated"); |
| return HWC2::Error::NotValidated; |
| } |
| |
| *out_num_elements = UINT32(layer_changes_.size()); |
| if (out_layers != nullptr && out_types != nullptr) { |
| int i = 0; |
| for (auto change : layer_changes_) { |
| out_layers[i] = change.first; |
| out_types[i] = INT32(change.second); |
| i++; |
| } |
| } |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetReleaseFences(uint32_t *out_num_elements, hwc2_layer_t *out_layers, |
| std::vector<shared_ptr<Fence>> *out_fences) { |
| if (out_num_elements == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| if (out_layers != nullptr && out_fences != nullptr) { |
| *out_num_elements = std::min(*out_num_elements, UINT32(layer_set_.size())); |
| auto it = layer_set_.begin(); |
| for (uint32_t i = 0; i < *out_num_elements; i++, it++) { |
| auto hwc_layer = *it; |
| out_layers[i] = hwc_layer->GetId(); |
| |
| shared_ptr<Fence> &fence = (*out_fences)[i]; |
| fence = hwc_layer->GetReleaseFence(); |
| } |
| } else { |
| *out_num_elements = UINT32(layer_set_.size()); |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayRequests(int32_t *out_display_requests, |
| uint32_t *out_num_elements, hwc2_layer_t *out_layers, |
| int32_t *out_layer_requests) { |
| if (layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (out_display_requests == nullptr || out_num_elements == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| // No display requests for now |
| // Use for sharing blit buffers and |
| // writing wfd buffer directly to output if there is full GPU composition |
| // and no color conversion needed |
| if (!validate_done_) { |
| DLOGW("Display is not validated"); |
| return HWC2::Error::NotValidated; |
| } |
| |
| *out_display_requests = 0; |
| if (out_layers != nullptr && out_layer_requests != nullptr) { |
| *out_num_elements = std::min(*out_num_elements, UINT32(layer_requests_.size())); |
| auto it = layer_requests_.begin(); |
| for (uint32_t i = 0; i < *out_num_elements; i++, it++) { |
| out_layers[i] = it->first; |
| out_layer_requests[i] = INT32(it->second); |
| } |
| } else { |
| *out_num_elements = UINT32(layer_requests_.size()); |
| } |
| |
| auto client_target_layer = client_target_->GetSDMLayer(); |
| if (client_target_layer->request.flags.flip_buffer) { |
| *out_display_requests = INT32(HWC2::DisplayRequest::FlipClientTarget); |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetHdrCapabilities(uint32_t *out_num_types, int32_t *out_types, |
| float *out_max_luminance, |
| float *out_max_average_luminance, |
| float *out_min_luminance) { |
| int32_t supported_types[static_cast<int32_t>(Hdr::HDR10_PLUS)]; |
| |
| if (out_num_types == nullptr || out_max_luminance == nullptr || |
| out_max_average_luminance == nullptr || out_min_luminance == nullptr) { |
| return HWC2::Error::BadParameter; |
| } |
| |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| |
| if (!fixed_info.hdr_supported) { |
| *out_num_types = 0; |
| DLOGI("HDR is not supported"); |
| return HWC2::Error::None; |
| } |
| |
| uint32_t num_types = 0; |
| if (fixed_info.hdr_plus_supported) { |
| supported_types[num_types] = static_cast<int32_t>(Hdr::HDR10_PLUS); |
| num_types++; |
| } |
| |
| if (fixed_info.dolby_vision_supported) { |
| supported_types[num_types] = static_cast<int32_t>(Hdr::DOLBY_VISION); |
| num_types++; |
| } |
| |
| if (fixed_info.hdr_supported) { |
| supported_types[num_types] = static_cast<int32_t>(Hdr::HDR10); |
| num_types++; |
| } |
| |
| supported_types[num_types] = static_cast<int32_t>(Hdr::HLG); |
| num_types++; |
| |
| if (out_types == nullptr) { |
| *out_num_types = num_types; |
| } else { |
| uint32_t max_out_types = std::min(*out_num_types, num_types); |
| for (int32_t i = 0; i < max_out_types; i++) { |
| out_types[i] = supported_types[i]; |
| } |
| *out_max_luminance = fixed_info.max_luminance; |
| *out_max_average_luminance = fixed_info.average_luminance; |
| *out_min_luminance = fixed_info.min_luminance; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::CommitOrPrepare(bool validate_only, shared_ptr<Fence> *out_retire_fence, |
| uint32_t *out_num_types, uint32_t *out_num_requests, |
| bool *needs_commit) { |
| DTRACE_SCOPED(); |
| |
| if (shutdown_pending_) { |
| return HWC2::Error::BadDisplay; |
| } |
| |
| UpdateRefreshRate(); |
| UpdateActiveConfig(); |
| validate_done_ = false; |
| bool exit_validate = false; |
| PreValidateDisplay(&exit_validate); |
| if (exit_validate) { |
| validate_done_ = true; |
| client_target_3_1_set_ = false; |
| return HWC2::Error::None; |
| } |
| |
| layer_stack_.validate_only = validate_only; |
| |
| DisplayError error = display_intf_->CommitOrPrepare(&layer_stack_); |
| // Mask error if needed. |
| auto status = HandlePrepareError(error); |
| if (status != HWC2::Error::None) { |
| client_target_3_1_set_ = false; |
| return status; |
| } |
| |
| *needs_commit = error == kErrorNeedsCommit; |
| |
| if (!(*needs_commit)) { |
| PostCommitLayerStack(out_retire_fence); |
| } |
| |
| return PostPrepareLayerStack(out_num_types, out_num_requests); |
| } |
| |
| HWC2::Error HWCDisplay::CommitLayerStack(void) { |
| if (flush_) { |
| return HWC2::Error::None; |
| } |
| |
| DTRACE_SCOPED(); |
| |
| if (shutdown_pending_ || layer_set_.empty()) { |
| return HWC2::Error::None; |
| } |
| |
| if (!validate_done_) { |
| DLOGV_IF(kTagClient, "Display %" PRIu64 "is not validated", id_); |
| return HWC2::Error::NotValidated; |
| } |
| |
| if (skip_commit_) { |
| DLOGV_IF(kTagClient, "Skipping Refresh on display %" PRIu64 , id_); |
| return HWC2::Error::None; |
| } |
| |
| DisplayError error = kErrorUndefined; |
| int status = 0; |
| if (tone_mapper_) { |
| if (NeedsToneMap(layer_stack_)) { |
| status = tone_mapper_->HandleToneMap(&layer_stack_); |
| if (status != 0) { |
| DLOGE("Error handling HDR in ToneMapper"); |
| } |
| } else { |
| tone_mapper_->Terminate(); |
| } |
| } |
| |
| error = display_intf_->Commit(&layer_stack_); |
| |
| if (error == kErrorNone) { |
| // A commit is successfully submitted, start flushing on failure now onwards. |
| flush_on_error_ = true; |
| first_cycle_ = false; |
| } else { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| } else if (error == kErrorNotValidated) { |
| return HWC2::Error::NotValidated; |
| } else if (error != kErrorPermission) { |
| DLOGE("Commit failed. Error = %d", error); |
| // To prevent surfaceflinger infinite wait, flush the previous frame during Commit() |
| // so that previous buffer and fences are released, and override the error. |
| flush_ = true; |
| } |
| return HWC2::Error::Unsupported; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::PostCommitLayerStack(shared_ptr<Fence> *out_retire_fence) { |
| DTRACE_SCOPED(); |
| auto status = HWC2::Error::None; |
| |
| // Do no call flush on errors, if a successful buffer is never submitted. |
| if (flush_ && flush_on_error_) { |
| display_intf_->Flush(&layer_stack_); |
| } |
| |
| if (tone_mapper_ && tone_mapper_->IsActive()) { |
| tone_mapper_->PostCommit(&layer_stack_); |
| } |
| |
| DumpInputBuffers(); |
| |
| RetrieveFences(out_retire_fence); |
| client_target_->ResetGeometryChanges(); |
| |
| for (auto hwc_layer : layer_set_) { |
| hwc_layer->ResetGeometryChanges(); |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| LayerBuffer *layer_buffer = &layer->input_buffer; |
| layer->request.flags = {}; |
| layer_buffer->acquire_fence = nullptr; |
| } |
| |
| client_target_->GetSDMLayer()->request.flags = {}; |
| |
| layer_stack_.flags.geometry_changed = false; |
| geometry_changes_ = GeometryChanges::kNone; |
| flush_ = false; |
| skip_commit_ = false; |
| |
| if (display_pause_pending_) { |
| DLOGI("Pause display %d-%d", sdm_id_, type_); |
| display_paused_ = true; |
| display_pause_pending_ = false; |
| } |
| |
| layer_stack_.flags.geometry_changed = false; |
| geometry_changes_ = GeometryChanges::kNone; |
| flush_ = false; |
| skip_commit_ = false; |
| client_target_3_1_set_ = false; |
| |
| if (display_pause_pending_) { |
| DLOGI("Pause display %d-%d", sdm_id_, type_); |
| display_paused_ = true; |
| display_pause_pending_ = false; |
| } |
| if (secure_event_ == kTUITransitionEnd || secure_event_ == kSecureDisplayEnd || |
| secure_event_ == kTUITransitionUnPrepare) { |
| secure_event_ = kSecureEventMax; |
| } |
| |
| // Handle pending config changes. |
| if (pending_first_commit_config_) { |
| DLOGI("Changing active config to %d", UINT32(pending_first_commit_config_)); |
| pending_first_commit_config_ = false; |
| SetActiveConfig(pending_first_commit_config_index_); |
| } |
| |
| return status; |
| } |
| |
| void HWCDisplay::RetrieveFences(shared_ptr<Fence> *out_retire_fence) { |
| // TODO(user): No way to set the client target release fence on SvF |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| LayerBuffer *layer_buffer = &layer->input_buffer; |
| |
| if (!flush_) { |
| // If swapinterval property is set to 0 or for single buffer layers, do not update f/w |
| // release fences and discard fences from driver |
| if (!swap_interval_zero_ && !layer->flags.single_buffer) { |
| // It may so happen that layer gets marked to GPU & app layer gets queued |
| // to MDP for composition. In those scenarios, release fence of buffer should |
| // have mdp and gpu sync points merged. |
| hwc_layer->SetReleaseFence(layer_buffer->release_fence); |
| } |
| } else { |
| // In case of flush or display paused, we don't return an error to f/w, so it will |
| // get a release fence out of the hwc_layer's release fence queue |
| // We should push a -1 to preserve release fence circulation semantics. |
| hwc_layer->SetReleaseFence(nullptr); |
| } |
| |
| layer_buffer->acquire_fence = nullptr; |
| } |
| |
| // if swapinterval property is set to 0 then close and reset the list retire fence |
| if (!swap_interval_zero_) { |
| *out_retire_fence = layer_stack_.retire_fence; |
| } |
| } |
| |
| void HWCDisplay::SetIdleTimeoutMs(uint32_t timeout_ms, uint32_t inactive_ms) { |
| return; |
| } |
| |
| DisplayError HWCDisplay::SetMaxMixerStages(uint32_t max_mixer_stages) { |
| DisplayError error = kErrorNone; |
| |
| if (display_intf_) { |
| error = display_intf_->SetMaxMixerStages(max_mixer_stages); |
| } |
| |
| return error; |
| } |
| |
| void HWCDisplay::DumpInputBuffers() { |
| char dir_path[PATH_MAX]; |
| int status; |
| |
| if (!dump_frame_count_ || flush_ || !dump_input_layers_) { |
| return; |
| } |
| |
| DLOGI("dump_frame_count %d dump_input_layers %d", dump_frame_count_, dump_input_layers_); |
| snprintf(dir_path, sizeof(dir_path), "%s/frame_dump_disp_id_%02u_%s", HWCDebugHandler::DumpDir(), |
| UINT32(id_), GetDisplayString()); |
| |
| status = mkdir(dir_path, 777); |
| if ((status != 0) && errno != EEXIST) { |
| DLOGW("Failed to create %s directory errno = %d, desc = %s", dir_path, errno, strerror(errno)); |
| return; |
| } |
| |
| // Even if directory exists already, need to explicitly change the permission. |
| if (chmod(dir_path, 0777) != 0) { |
| DLOGW("Failed to change permissions on %s directory", dir_path); |
| return; |
| } |
| |
| bool dump_gpu_target = false; // whether to dump GPU Target layer. |
| for (uint32_t i = 0; i < layer_stack_.layers.size(); i++) { |
| auto layer = layer_stack_.layers.at(i); |
| if (!dump_gpu_target) { |
| if (layer->composition == kCompositionGPU) { |
| dump_gpu_target = true; // Dump GPU Target layer only if its not a full MDP composition. |
| } else if (layer->composition == kCompositionGPUTarget) { |
| DLOGI("Skipping dumping target layer. dump_gpu_target : %d", dump_gpu_target); |
| break; // Skip dumping GPU Target layer. |
| } |
| } |
| |
| const native_handle_t *handle = |
| reinterpret_cast<const native_handle_t *>(layer->input_buffer.buffer_id); |
| Fence::Wait(layer->input_buffer.acquire_fence); |
| |
| |
| if (!handle) { |
| DLOGW("Buffer handle is detected as null for layer: %s(%d) out of %lu layers with layer " |
| "flag value: %u", layer->layer_name.c_str(), layer->layer_id, |
| layer_stack_.layers.size(), layer->flags); |
| continue; |
| } |
| |
| DLOGI("Dump layer[%d] of %lu handle %p", i, layer_stack_.layers.size(), handle); |
| |
| void *base_ptr = NULL; |
| int error = buffer_allocator_->MapBuffer(handle, nullptr, &base_ptr); |
| if (error != kErrorNone) { |
| DLOGE("Failed to map buffer, error = %d", error); |
| continue; |
| } |
| |
| char dump_file_name[PATH_MAX]; |
| size_t result = 0; |
| |
| uint32_t width = 0, height = 0, alloc_size = 0; |
| int32_t format = 0; |
| |
| buffer_allocator_->GetWidth((void *)handle, width); |
| buffer_allocator_->GetHeight((void *)handle, height); |
| buffer_allocator_->GetFormat((void *)handle, format); |
| buffer_allocator_->GetAllocationSize((void *)handle, alloc_size); |
| |
| snprintf(dump_file_name, sizeof(dump_file_name), "%s/input_layer%d_%dx%d_format%d_frame%d.raw", |
| dir_path, i, width, height, format, dump_frame_index_); |
| |
| if (base_ptr != nullptr) { |
| FILE *fp = fopen(dump_file_name, "w+"); |
| if (fp) { |
| result = fwrite(base_ptr, alloc_size, 1, fp); |
| fclose(fp); |
| } |
| } |
| |
| int release_fence = -1; |
| error = buffer_allocator_->UnmapBuffer(handle, &release_fence); |
| if (error != 0) { |
| DLOGE("Failed to unmap buffer, error = %d", error); |
| continue; |
| } |
| |
| DLOGI("Frame Dump %s: is %s", dump_file_name, result ? "Successful" : "Failed"); |
| |
| if (layer->composition == kCompositionGPUTarget) { // Skip dumping the layers that follow |
| // follow GPU Target layer in layers list (i.e. stitch layers, noise layer, demura layer). |
| break; |
| } |
| } |
| } |
| |
| void HWCDisplay::DumpOutputBuffer(const BufferInfo &buffer_info, void *base, |
| shared_ptr<Fence> &retire_fence) { |
| char dir_path[PATH_MAX]; |
| int status; |
| |
| snprintf(dir_path, sizeof(dir_path), "%s/frame_dump_disp_id_%02u_%s", HWCDebugHandler::DumpDir(), |
| UINT32(id_), GetDisplayString()); |
| |
| status = mkdir(dir_path, 777); |
| if ((status != 0) && errno != EEXIST) { |
| DLOGW("Failed to create %s directory errno = %d, desc = %s", dir_path, errno, strerror(errno)); |
| return; |
| } |
| |
| // Even if directory exists already, need to explicitly change the permission. |
| if (chmod(dir_path, 0777) != 0) { |
| DLOGW("Failed to change permissions on %s directory", dir_path); |
| return; |
| } |
| |
| if (base) { |
| char dump_file_name[PATH_MAX]; |
| size_t result = 0; |
| |
| if (Fence::Wait(retire_fence) != kErrorNone) { |
| DLOGW("sync_wait error errno = %d, desc = %s", errno, strerror(errno)); |
| return; |
| } |
| |
| snprintf(dump_file_name, sizeof(dump_file_name), "%s/output_layer_%dx%d_%s_frame%d.raw", |
| dir_path, buffer_info.alloc_buffer_info.aligned_width, |
| buffer_info.alloc_buffer_info.aligned_height, |
| GetFormatString(buffer_info.buffer_config.format), dump_frame_index_); |
| |
| FILE *fp = fopen(dump_file_name, "w+"); |
| if (fp) { |
| result = fwrite(base, buffer_info.alloc_buffer_info.size, 1, fp); |
| fclose(fp); |
| } |
| // Need to clear buffer after dumping of current frame to provide empty buffer for next frame. |
| memset(base, 0, buffer_info.alloc_buffer_info.size); |
| DLOGI("Frame Dump of %s is %s", dump_file_name, result ? "Successful" : "Failed"); |
| } |
| } |
| |
| const char *HWCDisplay::GetDisplayString() { |
| switch (type_) { |
| case kBuiltIn: |
| return "builtin"; |
| case kPluggable: |
| return "pluggable"; |
| case kVirtual: |
| return "virtual"; |
| default: |
| return "invalid"; |
| } |
| } |
| |
| int HWCDisplay::SetFrameBufferConfig(uint32_t x_pixels, uint32_t y_pixels) { |
| DTRACE_SCOPED(); |
| if (x_pixels <= 0 || y_pixels <= 0) { |
| DLOGW("Unsupported config: x_pixels=%d, y_pixels=%d", x_pixels, y_pixels); |
| return -EINVAL; |
| } |
| |
| DisplayConfigVariableInfo fb_config; |
| DisplayError error = display_intf_->GetFrameBufferConfig(&fb_config); |
| if (error != kErrorNone) { |
| DLOGV("Get frame buffer config failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| fb_config.x_pixels = x_pixels; |
| fb_config.y_pixels = y_pixels; |
| |
| error = display_intf_->SetFrameBufferConfig(fb_config); |
| if (error != kErrorNone) { |
| DLOGV("Set frame buffer config failed. Error = %d", error); |
| return -EINVAL; |
| } |
| |
| // Reduce the src_rect and dst_rect as per FBT config. |
| // SF sending reduced FBT but here the src_rect is equal to mixer which is |
| // higher than allocated buffer of FBT. |
| if (windowed_display_) { |
| x_pixels -= UINT32(window_rect_.right + window_rect_.left); |
| y_pixels -= UINT32(window_rect_.bottom + window_rect_.top); |
| } |
| |
| if (x_pixels <= 0 || y_pixels <= 0) { |
| DLOGE("window rects are not within the supported range"); |
| return -EINVAL; |
| } |
| |
| // Create rects to represent the new source and destination crops |
| LayerRect crop = LayerRect(0, 0, FLOAT(x_pixels), FLOAT(y_pixels)); |
| hwc_rect_t scaled_display_frame = {0, 0, INT(x_pixels), INT(y_pixels)}; |
| auto client_target_layer = client_target_->GetSDMLayer(); |
| client_target_layer->src_rect = crop; |
| ApplyScanAdjustment(&scaled_display_frame); |
| client_target_->SetLayerDisplayFrame(scaled_display_frame); |
| client_target_->ResetPerFrameData(); |
| |
| DLOGI("New framebuffer resolution (%dx%d)", fb_config.x_pixels, fb_config.y_pixels); |
| |
| return 0; |
| } |
| |
| int HWCDisplay::SetFrameBufferResolution(uint32_t x_pixels, uint32_t y_pixels) { |
| int error = SetFrameBufferConfig(x_pixels, y_pixels); |
| if (error < 0) { |
| DLOGV("SetFrameBufferConfig failed. Error = %d", error); |
| return error; |
| } |
| |
| if (windowed_display_) { |
| x_pixels -= UINT32(window_rect_.right + window_rect_.left); |
| y_pixels -= UINT32(window_rect_.bottom + window_rect_.top); |
| } |
| auto client_target_layer = client_target_->GetSDMLayer(); |
| |
| int aligned_width; |
| int aligned_height; |
| uint32_t usage = GRALLOC_USAGE_HW_FB; |
| int format = static_cast<int>(PixelFormat::RGBA_8888); |
| int ubwc_disabled = 0; |
| int flags = 0; |
| |
| // By default UBWC is enabled and below property is global enable/disable for all |
| // buffers allocated through gralloc , including framebuffer targets. |
| HWCDebugHandler::Get()->GetProperty(DISABLE_UBWC_PROP, &ubwc_disabled); |
| if (!ubwc_disabled) { |
| usage |= GRALLOC_USAGE_PRIVATE_ALLOC_UBWC; |
| flags |= qtigralloc::PRIV_FLAGS_UBWC_ALIGNED; |
| } |
| |
| buffer_allocator_->GetAlignedWidthAndHeight(INT(x_pixels), INT(y_pixels), format, usage, |
| &aligned_width, &aligned_height); |
| |
| // TODO(user): How does the dirty region get set on the client target? File bug on Google |
| client_target_layer->composition = kCompositionGPUTarget; |
| client_target_layer->input_buffer.format = HWCLayer::GetSDMFormat(format, flags); |
| client_target_layer->input_buffer.width = UINT32(aligned_width); |
| client_target_layer->input_buffer.height = UINT32(aligned_height); |
| client_target_layer->input_buffer.unaligned_width = x_pixels; |
| client_target_layer->input_buffer.unaligned_height = y_pixels; |
| client_target_layer->plane_alpha = 255; |
| |
| return 0; |
| } |
| |
| void HWCDisplay::GetFrameBufferResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| DTRACE_SCOPED(); |
| DisplayConfigVariableInfo fb_config; |
| display_intf_->GetFrameBufferConfig(&fb_config); |
| |
| *x_pixels = fb_config.x_pixels; |
| *y_pixels = fb_config.y_pixels; |
| } |
| |
| DisplayError HWCDisplay::GetMixerResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| return display_intf_->GetMixerResolution(x_pixels, y_pixels); |
| } |
| |
| uint32_t HWCDisplay::GetAvailableMixerCount() { |
| return display_intf_->GetAvailableMixerCount(); |
| } |
| |
| void HWCDisplay::GetPanelResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| DisplayConfigVariableInfo display_config; |
| uint32_t active_index = 0; |
| |
| display_intf_->GetActiveConfig(&active_index); |
| display_intf_->GetConfig(active_index, &display_config); |
| |
| *x_pixels = display_config.x_pixels; |
| *y_pixels = display_config.y_pixels; |
| } |
| |
| void HWCDisplay::GetRealPanelResolution(uint32_t *x_pixels, uint32_t *y_pixels) { |
| DisplayConfigVariableInfo display_config; |
| uint32_t active_index = 0; |
| |
| display_intf_->GetActiveConfig(&active_index); |
| display_intf_->GetRealConfig(active_index, &display_config); |
| |
| *x_pixels = display_config.x_pixels; |
| *y_pixels = display_config.y_pixels; |
| } |
| |
| int HWCDisplay::SetDisplayStatus(DisplayStatus display_status) { |
| int status = 0; |
| |
| switch (display_status) { |
| case kDisplayStatusResume: |
| display_paused_ = false; |
| status = INT32(SetPowerMode(HWC2::PowerMode::On, false /* teardown */)); |
| break; |
| case kDisplayStatusOnline: |
| status = INT32(SetPowerMode(HWC2::PowerMode::On, false /* teardown */)); |
| break; |
| case kDisplayStatusPause: |
| display_paused_ = true; |
| status = INT32(SetPowerMode(HWC2::PowerMode::Off, false /* teardown */)); |
| break; |
| case kDisplayStatusOffline: |
| status = INT32(SetPowerMode(HWC2::PowerMode::Off, false /* teardown */)); |
| break; |
| default: |
| DLOGW("Invalid display status %d", display_status); |
| return -EINVAL; |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplay::SetCursorPosition(hwc2_layer_t layer, int x, int y) { |
| if (shutdown_pending_) { |
| return HWC2::Error::None; |
| } |
| |
| if (!layer_stack_.flags.cursor_present) { |
| DLOGW("Cursor layer not present"); |
| return HWC2::Error::BadLayer; |
| } |
| |
| HWCLayer *hwc_layer = GetHWCLayer(layer); |
| if (hwc_layer == nullptr) { |
| return HWC2::Error::BadLayer; |
| } |
| if (hwc_layer->GetDeviceSelectedCompositionType() != HWC2::Composition::Cursor) { |
| return HWC2::Error::None; |
| } |
| if (display_intf_->IsValidated()) { |
| // the device is currently in the middle of the validate/present sequence, |
| // cannot set the Position(as per HWC2 spec) |
| return HWC2::Error::NotValidated; |
| } |
| |
| DisplayState state; |
| if (display_intf_->GetDisplayState(&state) == kErrorNone) { |
| if (state != kStateOn) { |
| return HWC2::Error::None; |
| } |
| } |
| |
| // TODO(user): HWC1.5 was not letting SetCursorPosition before validateDisplay, |
| // but HWC2.0 doesn't let setting cursor position after validate before present. |
| // Need to revisit. |
| |
| auto error = display_intf_->SetCursorPosition(x, y); |
| if (error != kErrorNone) { |
| if (error == kErrorShutDown) { |
| shutdown_pending_ = true; |
| return HWC2::Error::None; |
| } |
| |
| DLOGE("Failed for x = %d y = %d, Error = %d", x, y, error); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| int HWCDisplay::OnMinHdcpEncryptionLevelChange(uint32_t min_enc_level) { |
| DisplayError error = display_intf_->OnMinHdcpEncryptionLevelChange(min_enc_level); |
| if (error != kErrorNone) { |
| DLOGE("Failed. Error = %d", error); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| void HWCDisplay::MarkLayersForGPUBypass() { |
| for (auto hwc_layer : layer_set_) { |
| auto layer = hwc_layer->GetSDMLayer(); |
| layer->composition = kCompositionSDE; |
| } |
| } |
| |
| void HWCDisplay::MarkLayersForClientComposition() { |
| // ClientComposition - GPU comp, to acheive this, set skip flag so that |
| // SDM does not handle this layer and hwc_layer composition will be |
| // set correctly at the end of Prepare. |
| DLOGV_IF(kTagClient, "HWC Layers marked for GPU comp"); |
| for (auto hwc_layer : layer_set_) { |
| Layer *layer = hwc_layer->GetSDMLayer(); |
| layer->flags.skip = true; |
| } |
| layer_stack_.flags.skip_present = true; |
| } |
| |
| void HWCDisplay::ApplyScanAdjustment(hwc_rect_t *display_frame) { |
| } |
| |
| int HWCDisplay::ToggleScreenUpdates(bool enable) { |
| display_paused_ = enable ? false : true; |
| callbacks_->Refresh(id_); |
| return 0; |
| } |
| |
| int HWCDisplay::ColorSVCRequestRoute(const PPDisplayAPIPayload &in_payload, |
| PPDisplayAPIPayload *out_payload, |
| PPPendingParams *pending_action) { |
| int ret = 0; |
| |
| if (display_intf_) |
| ret = display_intf_->ColorSVCRequestRoute(in_payload, out_payload, pending_action); |
| else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| void HWCDisplay::SolidFillPrepare() { |
| if (solid_fill_enable_) { |
| if (solid_fill_layer_ == NULL) { |
| // Create a dummy layer here |
| solid_fill_layer_ = new Layer(); |
| } |
| uint32_t primary_width = 0, primary_height = 0; |
| GetMixerResolution(&primary_width, &primary_height); |
| |
| LayerBuffer *layer_buffer = &solid_fill_layer_->input_buffer; |
| layer_buffer->width = primary_width; |
| layer_buffer->height = primary_height; |
| layer_buffer->unaligned_width = primary_width; |
| layer_buffer->unaligned_height = primary_height; |
| |
| solid_fill_layer_->composition = kCompositionGPU; |
| solid_fill_layer_->src_rect = solid_fill_rect_; |
| solid_fill_layer_->dst_rect = solid_fill_rect_; |
| |
| solid_fill_layer_->blending = kBlendingPremultiplied; |
| solid_fill_layer_->solid_fill_color = 0; |
| solid_fill_layer_->solid_fill_info.bit_depth = solid_fill_color_.bit_depth; |
| solid_fill_layer_->solid_fill_info.red = solid_fill_color_.red; |
| solid_fill_layer_->solid_fill_info.blue = solid_fill_color_.blue; |
| solid_fill_layer_->solid_fill_info.green = solid_fill_color_.green; |
| solid_fill_layer_->solid_fill_info.alpha = solid_fill_color_.alpha; |
| solid_fill_layer_->frame_rate = 60; |
| solid_fill_layer_->visible_regions.push_back(solid_fill_layer_->dst_rect); |
| solid_fill_layer_->flags.updating = 1; |
| solid_fill_layer_->flags.solid_fill = true; |
| } else { |
| // delete the dummy layer |
| delete solid_fill_layer_; |
| solid_fill_layer_ = NULL; |
| } |
| |
| if (solid_fill_enable_ && solid_fill_layer_) { |
| BuildSolidFillStack(); |
| MarkLayersForGPUBypass(); |
| } |
| |
| return; |
| } |
| |
| int HWCDisplay::GetVisibleDisplayRect(hwc_rect_t *visible_rect) { |
| if (!IsValid(display_rect_)) { |
| return -EINVAL; |
| } |
| |
| visible_rect->left = INT(display_rect_.left); |
| visible_rect->top = INT(display_rect_.top); |
| visible_rect->right = INT(display_rect_.right); |
| visible_rect->bottom = INT(display_rect_.bottom); |
| DLOGI("Visible Display Rect(%d %d %d %d)", visible_rect->left, visible_rect->top, |
| visible_rect->right, visible_rect->bottom); |
| |
| return 0; |
| } |
| |
| int HWCDisplay::HandleSecureSession(const std::bitset<kSecureMax> &secure_sessions, |
| bool *power_on_pending, bool is_active_secure_display) { |
| if (!power_on_pending) { |
| return -EINVAL; |
| } |
| |
| if (active_secure_sessions_[kSecureDisplay] != secure_sessions[kSecureDisplay]) { |
| if (secure_sessions[kSecureDisplay]) { |
| pending_power_mode_ = current_power_mode_; |
| HWC2::Error error = SetPowerMode(HWC2::PowerMode::Off, true /* teardown */); |
| if (error != HWC2::Error::None) { |
| DLOGE("SetPowerMode failed. Error = %d", error); |
| } |
| } else { |
| *power_on_pending = (pending_power_mode_ != HWC2::PowerMode::Off) ? true : false; |
| } |
| |
| DLOGI("SecureDisplay state changed from %d to %d for display %" PRId64 " %d-%d", |
| active_secure_sessions_.test(kSecureDisplay), secure_sessions.test(kSecureDisplay), |
| id_, sdm_id_, type_); |
| } |
| |
| if (active_secure_sessions_[kSecureCamera] != secure_sessions[kSecureCamera]) { |
| if (secure_sessions[kSecureCamera]) { |
| pending_power_mode_ = current_power_mode_; |
| HWC2::Error error = SetPowerMode(HWC2::PowerMode::Off, true /* teardown */); |
| if (error != HWC2::Error::None) { |
| DLOGE("SetPowerMode failed. Error = %d", error); |
| } |
| } else { |
| *power_on_pending = (pending_power_mode_ != HWC2::PowerMode::Off) ? true : false; |
| } |
| |
| DLOGI("SecureCamera state changed from %d to %d for display %" PRId64 " %d-%d", |
| active_secure_sessions_.test(kSecureCamera), secure_sessions.test(kSecureCamera), |
| id_, sdm_id_, type_); |
| } |
| active_secure_sessions_ = secure_sessions; |
| return 0; |
| } |
| |
| int HWCDisplay::SetActiveDisplayConfig(uint32_t config) { |
| uint32_t current_config = 0; |
| display_intf_->GetActiveConfig(¤t_config); |
| if (config == current_config) { |
| return 0; |
| } |
| |
| DisplayError error = display_intf_->SetActiveConfig(config); |
| if (error != kErrorNone) { |
| DLOGE("Failed to set %d config! Error: %d", config, error); |
| return -EINVAL; |
| } |
| |
| SetActiveConfigIndex(config); |
| return 0; |
| } |
| |
| int HWCDisplay::SetNoisePlugInOverride(bool override_en, int32_t attn, int32_t noise_zpos) { |
| DisplayError error = display_intf_->SetNoisePlugInOverride(override_en, attn, noise_zpos); |
| if (error != kErrorNone) { |
| DLOGE("Display ID: %" PRId64 " failed to override NoisePlugIn! Error: %d", id_, error); |
| return -EINVAL; |
| } |
| callbacks_->Refresh(id_); |
| return 0; |
| } |
| |
| int HWCDisplay::GetActiveDisplayConfig(uint32_t *config) { |
| return display_intf_->GetActiveConfig(config) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetDisplayConfigCount(uint32_t *count) { |
| return display_intf_->GetNumVariableInfoConfigs(count) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetDisplayAttributesForConfig(int config, |
| DisplayConfigVariableInfo *display_attributes) { |
| return display_intf_->GetConfig(UINT32(config), display_attributes) == kErrorNone ? 0 : -1; |
| } |
| |
| int HWCDisplay::GetSupportedDisplayRefreshRates(std::vector<uint32_t> *supported_refresh_rates) { |
| if (!supported_refresh_rates) { |
| return -1; |
| } |
| |
| hwc2_config_t active_config = 0; |
| GetActiveConfig(&active_config); |
| |
| int32_t config_group, active_config_group; |
| auto error = GetDisplayAttribute(active_config, HwcAttribute::CONFIG_GROUP, &active_config_group); |
| if (error != HWC2::Error::None) { |
| DLOGE("Failed to get config group of active config"); |
| return -1; |
| } |
| |
| supported_refresh_rates->resize(0); |
| for (auto &config : variable_config_map_) { |
| error = GetDisplayAttribute(config.first, HwcAttribute::CONFIG_GROUP, &config_group); |
| if (error != HWC2::Error::None) { |
| DLOGE("Failed to get config group for config index: %u", config.first); |
| return -1; |
| } |
| if (active_config_group == config_group) { |
| DisplayConfigVariableInfo const &config_info = config.second; |
| supported_refresh_rates->push_back(config_info.fps); |
| } |
| } |
| |
| DLOGI("Count of supported refresh rates = %u for active config group = %d", |
| UINT32(supported_refresh_rates->size()), active_config_group); |
| return 0; |
| } |
| |
| bool HWCDisplay::IsLayerUpdating(HWCLayer *hwc_layer) { |
| auto layer = hwc_layer->GetSDMLayer(); |
| // Layer should be considered updating if |
| // a) layer is in single buffer mode, or |
| // b) valid dirty_regions(android specific hint for updating status), or |
| // c) layer stack geometry has changed (TODO(user): Remove when SDM accepts |
| // geometry_changed as bit fields). |
| return (layer->flags.single_buffer || hwc_layer->IsSurfaceUpdated() || |
| hwc_layer->GetGeometryChanges()); |
| } |
| |
| DisplayClass HWCDisplay::GetDisplayClass() { |
| return display_class_; |
| } |
| |
| void HWCDisplay::Dump(std::ostringstream *os) { |
| *os << "\n------------HWC----------------\n"; |
| *os << "HWC2 display_id: " << id_ << std::endl; |
| for (auto layer : layer_set_) { |
| auto sdm_layer = layer->GetSDMLayer(); |
| auto transform = sdm_layer->transform; |
| *os << "layer: " << std::setw(4) << layer->GetId(); |
| *os << " name: " << std::setw(100) << layer->GetName(); |
| *os << " z: " << layer->GetZ(); |
| *os << " composition: " << |
| to_string(layer->GetOrigClientRequestedCompositionType()).c_str(); |
| *os << "/" << |
| to_string(layer->GetDeviceSelectedCompositionType()).c_str(); |
| *os << " alpha: " << std::to_string(sdm_layer->plane_alpha).c_str(); |
| *os << " format: " << std::setw(22) << GetFormatString(sdm_layer->input_buffer.format); |
| *os << " dataspace:" << std::hex << "0x" << std::setw(8) << std::setfill('0') |
| << layer->GetLayerDataspace() << std::dec << std::setfill(' '); |
| *os << " transform: " << transform.rotation << "/" << transform.flip_horizontal << |
| "/"<< transform.flip_vertical; |
| *os << " buffer_id: " << std::hex << "0x" << sdm_layer->input_buffer.buffer_id << std::dec; |
| *os << " secure: " << layer->IsProtected() |
| << std::endl; |
| } |
| |
| if (has_client_composition_) { |
| *os << "\n---------client target---------\n"; |
| auto sdm_layer = client_target_->GetSDMLayer(); |
| *os << "format: " << std::setw(14) << GetFormatString(sdm_layer->input_buffer.format); |
| *os << " dataspace:" << std::hex << "0x" << std::setw(8) << std::setfill('0') |
| << client_target_->GetLayerDataspace() << std::dec << std::setfill(' '); |
| *os << " buffer_id: " << std::hex << "0x" << sdm_layer->input_buffer.buffer_id << std::dec; |
| *os << " secure: " << client_target_->IsProtected() |
| << std::endl; |
| } |
| |
| if (layer_stack_invalid_) { |
| *os << "\n Layers added or removed but not reflected to SDM's layer stack yet\n"; |
| return; |
| } |
| |
| if (color_mode_) { |
| *os << "\n----------Color Modes---------\n"; |
| color_mode_->Dump(os); |
| } |
| |
| if (display_intf_) { |
| *os << "\n------------SDM----------------\n"; |
| *os << display_intf_->Dump(); |
| } |
| |
| *os << "\n"; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayIdentificationData(uint8_t *out_port, uint32_t *out_data_size, |
| uint8_t *out_data) { |
| DisplayError ret = display_intf_->GetDisplayIdentificationData(out_port, out_data_size, out_data); |
| if (ret != kErrorNone) { |
| DLOGE("Failed due to SDM/Driver (err = %d, disp id = %" PRIu64 |
| " %d-%d", ret, id_, sdm_id_, type_); |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::SetDisplayElapseTime(uint64_t time) { |
| elapse_timestamp_ = time; |
| return HWC2::Error::None; |
| } |
| |
| bool HWCDisplay::IsDisplayCommandMode() { |
| return is_cmd_mode_; |
| } |
| |
| HWC2::Error HWCDisplay::SetDisplayedContentSamplingEnabledVndService(bool enabled) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| HWC2::Error HWCDisplay::SetDisplayedContentSamplingEnabled(int32_t enabled, uint8_t component_mask, |
| uint64_t max_frames) { |
| DLOGV("Request to start/stop histogram thread not supported on this display"); |
| return HWC2::Error::Unsupported; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayedContentSamplingAttributes(int32_t *format, int32_t *dataspace, |
| uint8_t *supported_components) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayedContentSample( |
| uint64_t max_frames, uint64_t timestamp, uint64_t *numFrames, |
| int32_t samples_size[NUM_HISTOGRAM_COLOR_COMPONENTS], |
| uint64_t *samples[NUM_HISTOGRAM_COLOR_COMPONENTS]) { |
| return HWC2::Error::Unsupported; |
| } |
| |
| // Skip SDM prepare if all the layers in the current draw cycle are marked as Skip and |
| // previous draw cycle had GPU Composition, as the resources for GPU Target layer have |
| // already been validated and configured to the driver. |
| bool HWCDisplay::CanSkipSdmPrepare(uint32_t *num_types, uint32_t *num_requests) { |
| if (!display_intf_->IsValidated() || layer_set_.empty()) { |
| return false; |
| } |
| |
| if (display_intf_->HasDemura()) { |
| return false; |
| } |
| |
| bool skip_prepare = true; |
| for (auto hwc_layer : layer_set_) { |
| if (!hwc_layer->GetSDMLayer()->flags.skip || |
| (hwc_layer->GetDeviceSelectedCompositionType() != HWC2::Composition::Client)) { |
| skip_prepare = false; |
| layer_changes_.clear(); |
| break; |
| } |
| if (hwc_layer->GetClientRequestedCompositionType() != HWC2::Composition::Client) { |
| layer_changes_[hwc_layer->GetId()] = HWC2::Composition::Client; |
| } |
| } |
| |
| if (skip_prepare) { |
| *num_types = UINT32(layer_changes_.size()); |
| *num_requests = 0; |
| layer_stack_invalid_ = false; |
| has_client_composition_ = true; |
| } |
| |
| return skip_prepare; |
| } |
| |
| void HWCDisplay::UpdateRefreshRate() { |
| for (auto hwc_layer : layer_set_) { |
| if (hwc_layer->HasMetaDataRefreshRate()) { |
| continue; |
| } |
| auto layer = hwc_layer->GetSDMLayer(); |
| layer->frame_rate = std::min(current_refresh_rate_, HWCDisplay::GetThrottlingRefreshRate()); |
| } |
| } |
| |
| int32_t HWCDisplay::SetClientTargetDataSpace(int32_t dataspace) { |
| if (client_target_->GetLayerDataspace() != dataspace) { |
| client_target_->SetLayerDataspace(dataspace); |
| Layer *sdm_layer = client_target_->GetSDMLayer(); |
| // Data space would be validated at GetClientTargetSupport, so just use here. |
| sdm::GetSDMColorSpace(client_target_->GetLayerDataspace(), |
| &sdm_layer->input_buffer.color_metadata); |
| } |
| |
| return 0; |
| } |
| |
| void HWCDisplay::WaitOnPreviousFence() { |
| DisplayConfigFixedInfo display_config; |
| display_intf_->GetConfig(&display_config); |
| if (!display_config.is_cmdmode) { |
| return; |
| } |
| |
| if (Fence::Wait(release_fence_) != kErrorNone) { |
| DLOGW("sync_wait error errno = %d, desc = %s", errno, strerror(errno)); |
| return; |
| } |
| } |
| |
| void HWCDisplay::GetLayerStack(HWCLayerStack *stack) { |
| stack->client_target = client_target_; |
| stack->layer_map = layer_map_; |
| stack->layer_set = layer_set_; |
| } |
| |
| void HWCDisplay::SetLayerStack(HWCLayerStack *stack) { |
| client_target_ = stack->client_target; |
| layer_map_ = stack->layer_map; |
| layer_set_ = stack->layer_set; |
| } |
| |
| bool HWCDisplay::CheckResourceState(bool *res_exhausted) { |
| if (display_intf_) { |
| return display_intf_->CheckResourceState(res_exhausted); |
| } |
| |
| return false; |
| } |
| |
| void HWCDisplay::UpdateActiveConfig() { |
| if (!pending_config_) { |
| return; |
| } |
| |
| DisplayError error = display_intf_->SetActiveConfig(pending_config_index_); |
| if (error != kErrorNone) { |
| DLOGI("Failed to set %d config", INT(pending_config_index_)); |
| } else { |
| SetActiveConfigIndex(pending_config_index_); |
| } |
| |
| // Reset pending config. |
| pending_config_ = false; |
| } |
| |
| int32_t HWCDisplay::GetDisplayConfigGroup(DisplayConfigGroupInfo variable_config) { |
| for (auto &config : variable_config_map_) { |
| DisplayConfigGroupInfo const &group_info = config.second; |
| if (group_info == variable_config) { |
| return INT32(config.first); |
| } |
| } |
| |
| return -1; |
| } |
| |
| bool HWCDisplay::IsModeSwitchAllowed(uint32_t config) { |
| DisplayError error = kErrorNone; |
| uint32_t allowed_mode_switch = 0; |
| |
| error = display_intf_->IsSupportedOnDisplay(kSupportedModeSwitch, &allowed_mode_switch); |
| if (error != kErrorNone) { |
| if (error == kErrorResources) { |
| DLOGW("Not allowed to switch to mode:%d", config); |
| return false; |
| } |
| DLOGW("Unable to retrieve supported modes for the current device configuration."); |
| } |
| |
| if (allowed_mode_switch == 0 || (allowed_mode_switch & (1 << config))) { |
| DLOGV_IF(kTagClient, "Allowed to switch to mode:%d", config); |
| return true; |
| } |
| |
| DLOGW("Not allowed to switch to mode:%d", config); |
| return false; |
| } |
| |
| HWC2::Error HWCDisplay::GetDisplayVsyncPeriod(VsyncPeriodNanos *vsync_period) { |
| if (GetTransientVsyncPeriod(vsync_period)) { |
| return HWC2::Error::None; |
| } |
| |
| return GetVsyncPeriodByActiveConfig(vsync_period); |
| } |
| |
| HWC2::Error HWCDisplay::SetActiveConfigWithConstraints( |
| hwc2_config_t config, const VsyncPeriodChangeConstraints *vsync_period_change_constraints, |
| VsyncPeriodChangeTimeline *out_timeline) { |
| DTRACE_SCOPED(); |
| |
| |
| if (variable_config_map_.find(config) == variable_config_map_.end()) { |
| DLOGE("Invalid config: %d", config); |
| return HWC2::Error::BadConfig; |
| } |
| |
| if (!IsModeSwitchAllowed(config)) { |
| return HWC2::Error::BadConfig; |
| } |
| |
| // DRM driver expects DRM_PREFERRED_MODE to be set as part of first commit |
| if (!IsFirstCommitDone()) { |
| // Store client's config. |
| // Set this as part of post commit. |
| pending_first_commit_config_ = true; |
| pending_first_commit_config_index_ = config; |
| DLOGI("Defer config change to %d until first commit", UINT32(config)); |
| return HWC2::Error::None; |
| } else if (pending_first_commit_config_) { |
| // Config override request from client. |
| // Honour latest request. |
| pending_first_commit_config_ = false; |
| } |
| |
| // Cache refresh rate set by client. |
| DisplayConfigVariableInfo info = {}; |
| GetDisplayAttributesForConfig(INT(config), &info); |
| active_refresh_rate_ = info.fps; |
| |
| if (vsync_period_change_constraints->seamlessRequired && !AllowSeamless(config)) { |
| DLOGE("Seamless switch to the config: %d, is not allowed!", config); |
| return HWC2::Error::SeamlessNotAllowed; |
| } |
| |
| VsyncPeriodNanos vsync_period; |
| if (GetDisplayVsyncPeriod(&vsync_period) != HWC2::Error::None) { |
| return HWC2::Error::BadConfig; |
| } |
| |
| std::tie(out_timeline->refreshTimeNanos, out_timeline->newVsyncAppliedTimeNanos) = |
| RequestActiveConfigChange(config, vsync_period, |
| vsync_period_change_constraints->desiredTimeNanos); |
| |
| out_timeline->refreshRequired = true; |
| if (is_client_up_ && (info.x_pixels != fb_width_ || info.y_pixels != fb_height_)) { |
| out_timeline->refreshRequired = false; |
| fb_width_ = info.x_pixels; |
| fb_height_ = info.y_pixels; |
| } |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplay::ProcessActiveConfigChange() { |
| if (!IsActiveConfigReadyToSubmit(systemTime(SYSTEM_TIME_MONOTONIC))) { |
| return; |
| } |
| |
| DTRACE_SCOPED(); |
| VsyncPeriodNanos vsync_period; |
| if (GetVsyncPeriodByActiveConfig(&vsync_period) == HWC2::Error::None) { |
| SubmitActiveConfigChange(vsync_period); |
| } |
| } |
| |
| HWC2::Error HWCDisplay::GetVsyncPeriodByActiveConfig(VsyncPeriodNanos *vsync_period) { |
| hwc2_config_t active_config; |
| |
| auto error = GetCachedActiveConfig(&active_config); |
| if (error != HWC2::Error::None) { |
| DLOGE("Failed to get active config!"); |
| return error; |
| } |
| |
| int32_t active_vsync_period; |
| error = GetDisplayAttribute(active_config, HwcAttribute::VSYNC_PERIOD, &active_vsync_period); |
| if (error != HWC2::Error::None) { |
| DLOGE("Failed to get VsyncPeriod of config: %d", active_config); |
| return error; |
| } |
| |
| *vsync_period = static_cast<VsyncPeriodNanos>(active_vsync_period); |
| return HWC2::Error::None; |
| } |
| |
| bool HWCDisplay::GetTransientVsyncPeriod(VsyncPeriodNanos *vsync_period) { |
| std::lock_guard<std::mutex> lock(transient_refresh_rate_lock_); |
| auto now = systemTime(SYSTEM_TIME_MONOTONIC); |
| |
| while (!transient_refresh_rate_info_.empty()) { |
| if (IsActiveConfigApplied(now, transient_refresh_rate_info_.front().vsync_applied_time)) { |
| transient_refresh_rate_info_.pop_front(); |
| } else { |
| *vsync_period = transient_refresh_rate_info_.front().transient_vsync_period; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| std::tuple<int64_t, int64_t> HWCDisplay::RequestActiveConfigChange( |
| hwc2_config_t config, VsyncPeriodNanos current_vsync_period, int64_t desired_time) { |
| int64_t refresh_time = 0; |
| int64_t applied_time = 0; |
| std::tie(refresh_time, applied_time) = |
| EstimateVsyncPeriodChangeTimeline(current_vsync_period, desired_time); |
| |
| pending_refresh_rate_config_ = config; |
| pending_refresh_rate_refresh_time_ = refresh_time; |
| pending_refresh_rate_applied_time_ = applied_time; |
| |
| return std::make_tuple(refresh_time, applied_time); |
| } |
| |
| std::tuple<int64_t, int64_t> HWCDisplay::EstimateVsyncPeriodChangeTimeline( |
| VsyncPeriodNanos current_vsync_period, int64_t desired_time) { |
| const auto now = systemTime(SYSTEM_TIME_MONOTONIC); |
| const auto delta = desired_time - now; |
| const auto refresh_rate_activate_period = current_vsync_period * vsyncs_to_apply_rate_change_; |
| nsecs_t refresh_time; |
| |
| if (delta < 0) { |
| refresh_time = now + (delta % current_vsync_period); |
| } else if (delta < refresh_rate_activate_period) { |
| refresh_time = now + (delta % current_vsync_period) - current_vsync_period; |
| } else { |
| refresh_time = desired_time - refresh_rate_activate_period; |
| } |
| |
| const auto applied_time = refresh_time + refresh_rate_activate_period; |
| return std::make_tuple(refresh_time, applied_time); |
| } |
| |
| void HWCDisplay::SubmitActiveConfigChange(VsyncPeriodNanos current_vsync_period) { |
| HWC2::Error error = SubmitDisplayConfig(pending_refresh_rate_config_); |
| if (error != HWC2::Error::None) { |
| return; |
| } |
| |
| std::lock_guard<std::mutex> lock(transient_refresh_rate_lock_); |
| hwc_vsync_period_change_timeline_t timeline = {}; |
| std::tie(timeline.refreshTimeNanos, timeline.newVsyncAppliedTimeNanos) = |
| EstimateVsyncPeriodChangeTimeline(current_vsync_period, pending_refresh_rate_refresh_time_); |
| |
| transient_refresh_rate_info_.push_back({current_vsync_period, timeline.newVsyncAppliedTimeNanos}); |
| if (timeline.newVsyncAppliedTimeNanos != pending_refresh_rate_applied_time_) { |
| timeline.refreshRequired = false; |
| callbacks_->VsyncPeriodTimingChanged(id_, &timeline); |
| } |
| |
| pending_refresh_rate_config_ = UINT_MAX; |
| pending_refresh_rate_refresh_time_ = INT64_MAX; |
| pending_refresh_rate_applied_time_ = INT64_MAX; |
| } |
| |
| bool HWCDisplay::IsActiveConfigReadyToSubmit(int64_t time) { |
| return ((pending_refresh_rate_config_ != UINT_MAX) && |
| IsTimeAfterOrEqualVsyncTime(time, pending_refresh_rate_refresh_time_)); |
| } |
| |
| bool HWCDisplay::IsActiveConfigApplied(int64_t time, int64_t vsync_applied_time) { |
| return IsTimeAfterOrEqualVsyncTime(time, vsync_applied_time); |
| } |
| |
| bool HWCDisplay::IsSameGroup(hwc2_config_t config_id1, hwc2_config_t config_id2) { |
| const auto &variable_config1 = variable_config_map_.find(config_id1); |
| const auto &variable_config2 = variable_config_map_.find(config_id2); |
| |
| if ((variable_config1 == variable_config_map_.end()) || |
| (variable_config2 == variable_config_map_.end())) { |
| DLOGE("Invalid config: %u, %u", config_id1, config_id2); |
| return false; |
| } |
| |
| const DisplayConfigGroupInfo &config_group1 = variable_config1->second; |
| const DisplayConfigGroupInfo &config_group2 = variable_config2->second; |
| |
| return (config_group1 == config_group2); |
| } |
| |
| bool HWCDisplay::AllowSeamless(hwc2_config_t config) { |
| hwc2_config_t active_config; |
| auto error = GetCachedActiveConfig(&active_config); |
| if (error != HWC2::Error::None) { |
| DLOGE("Failed to get active config!"); |
| return false; |
| } |
| |
| return IsSameGroup(active_config, config); |
| } |
| |
| HWC2::Error HWCDisplay::SubmitDisplayConfig(hwc2_config_t config) { |
| DTRACE_SCOPED(); |
| |
| hwc2_config_t current_config = 0; |
| GetActiveConfig(¤t_config); |
| |
| DisplayError error = display_intf_->SetActiveConfig(config); |
| if (error == kErrorDeferred) { |
| DLOGW("Failed to set new config:%d from current config:%d! Error: %d", |
| config, current_config, error); |
| return HWC2::Error::BadConfig; |
| } else if (error != kErrorNone) { |
| DLOGE("Failed to set new config:%d from current config:%d! Error: %d", |
| config, current_config, error); |
| return HWC2::Error::BadConfig; |
| } |
| |
| SetActiveConfigIndex(config); |
| DLOGI("Active configuration changed from config %d to %d", current_config, config); |
| |
| // Cache refresh rate set by client. |
| DisplayConfigVariableInfo info = {}; |
| GetDisplayAttributesForConfig(INT(config), &info); |
| active_refresh_rate_ = info.fps; |
| |
| DisplayConfigVariableInfo current_config_info = {}; |
| GetDisplayAttributesForConfig(INT(current_config), ¤t_config_info); |
| // Set fb config if new resolution differs |
| if (info.x_pixels != current_config_info.x_pixels || |
| info.y_pixels != current_config_info.y_pixels) { |
| if (SetFrameBufferResolution(info.x_pixels, info.y_pixels)) { |
| return HWC2::Error::BadParameter; |
| } |
| } |
| |
| return HWC2::Error::None; |
| } |
| |
| HWC2::Error HWCDisplay::GetCachedActiveConfig(hwc2_config_t *active_config) { |
| int config_index = GetActiveConfigIndex(); |
| if ((config_index < 0) || (config_index >= hwc_config_map_.size())) { |
| return GetActiveConfig(active_config); |
| } |
| |
| *active_config = static_cast<hwc2_config_t>(hwc_config_map_.at(config_index)); |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplay::SetActiveConfigIndex(int index) { |
| std::lock_guard<std::mutex> lock(active_config_lock_); |
| active_config_index_ = index; |
| } |
| |
| int HWCDisplay::GetActiveConfigIndex() { |
| std::lock_guard<std::mutex> lock(active_config_lock_); |
| return active_config_index_; |
| } |
| |
| DisplayError HWCDisplay::ValidateTUITransition (SecureEvent secure_event) { |
| switch (secure_event) { |
| case kTUITransitionPrepare: |
| if (secure_event_ != kSecureEventMax) { |
| DLOGE("Invalid TUI transition from %d to %d", secure_event_, secure_event); |
| return kErrorParameters; |
| } |
| break; |
| case kTUITransitionUnPrepare: |
| if (secure_event_ != kTUITransitionPrepare) { |
| DLOGE("Invalid TUI transition from %d to %d", secure_event_, secure_event); |
| return kErrorParameters; |
| } |
| break; |
| case kTUITransitionStart: |
| if (secure_event_ != kSecureEventMax) { |
| DLOGE("Invalid TUI transition from %d to %d", secure_event_, secure_event); |
| return kErrorParameters; |
| } |
| break; |
| case kTUITransitionEnd: |
| if (secure_event_ != kTUITransitionStart) { |
| DLOGE("Invalid TUI transition from %d to %d", secure_event_, secure_event); |
| return kErrorParameters; |
| } |
| break; |
| default: |
| DLOGE("Invalid secure event %d", secure_event); |
| return kErrorParameters; |
| } |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::HandleSecureEvent(SecureEvent secure_event, bool *needs_refresh) { |
| if (secure_event == secure_event_) { |
| return kErrorNone; |
| } |
| |
| DisplayError err = ValidateTUITransition(secure_event); |
| if (err != kErrorNone) { |
| return err; |
| } |
| |
| err = display_intf_->HandleSecureEvent(secure_event, needs_refresh); |
| if (err != kErrorNone) { |
| DLOGE("Handle secure event failed"); |
| return err; |
| } |
| |
| if (secure_event == kTUITransitionEnd) |
| color_mode_->ReapplyMode(); |
| |
| if (secure_event == kTUITransitionEnd || secure_event == kTUITransitionUnPrepare) { |
| DLOGI("Resume display %d-%d", sdm_id_, type_); |
| display_paused_ = false; |
| if (*needs_refresh == false) { |
| secure_event_ = kSecureEventMax; |
| return kErrorNone; |
| } |
| } else if (secure_event == kTUITransitionPrepare || secure_event == kTUITransitionStart) { |
| if (*needs_refresh) { |
| display_pause_pending_ = true; |
| } else { |
| DLOGI("Pause display %d-%d", sdm_id_, type_); |
| display_paused_ = true; |
| } |
| } |
| |
| secure_event_ = secure_event; |
| |
| return kErrorNone; |
| } |
| |
| DisplayError HWCDisplay::PostHandleSecureEvent(SecureEvent secure_event) { |
| return display_intf_->PostHandleSecureEvent(secure_event); |
| } |
| |
| int HWCDisplay::GetCwbBufferResolution(CwbConfig *cwb_config, uint32_t *x_pixels, |
| uint32_t *y_pixels) { |
| if (!x_pixels || !y_pixels) { |
| return -1; |
| } |
| DisplayError ret = display_intf_->GetCwbBufferResolution(cwb_config, x_pixels, |
| y_pixels); |
| if (ret != kErrorNone) { |
| DLOGE("Failed to get Output buffer resolution."); |
| return -1; |
| } |
| return 0; |
| } |
| |
| DisplayError HWCDisplay::TeardownConcurrentWriteback(bool *needs_refresh) { |
| if (!needs_refresh) { |
| return kErrorParameters; |
| } |
| |
| if (!display_intf_->HandleCwbTeardown()) { |
| bool pending_cwb_request = false; |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| pending_cwb_request = !!cwb_buffer_map_.size(); |
| } |
| |
| if (!pending_cwb_request) { |
| dump_frame_count_ = 0; |
| dump_frame_index_ = 0; |
| dump_output_to_file_ = false; |
| if (output_buffer_base_ != nullptr) { |
| if (munmap(output_buffer_base_, output_buffer_info_.alloc_buffer_info.size) != 0) { |
| DLOGW("unmap failed with err %d", errno); |
| } |
| } |
| |
| if (buffer_allocator_ && buffer_allocator_->FreeBuffer(&output_buffer_info_) != 0) { |
| DLOGW("FreeBuffer failed"); |
| } |
| output_buffer_info_ = {}; |
| output_buffer_base_ = nullptr; |
| frame_capture_buffer_queued_ = false; |
| frame_capture_status_ = 0; |
| *needs_refresh = false; |
| return kErrorNone; |
| } |
| } |
| |
| *needs_refresh = true; |
| return kErrorNone; |
| } |
| |
| void HWCDisplay::MMRMEvent(bool restricted) { |
| mmrm_restricted_ = restricted; |
| callbacks_->Refresh(id_); |
| } |
| |
| void HWCDisplay::SetDrawMethod() { |
| if (draw_method_set_) { |
| return; |
| } |
| |
| // Default behaviour. |
| // Init draw method from fixed config. |
| // Update it if client supports setting next FBT. |
| DisplayConfigFixedInfo fixed_info = {}; |
| display_intf_->GetConfig(&fixed_info); |
| |
| draw_method_ = kDrawDefault; |
| if (fixed_info.supports_unified_draw) { |
| // Composer extn is not present. |
| draw_method_ = kDrawUnified; |
| } |
| |
| DLOGI("Set draw method: %d", draw_method_); |
| display_intf_->SetDrawMethod(draw_method_); |
| |
| draw_method_set_ = true; |
| } |
| |
| HWC2::Error HWCDisplay::TryDrawMethod(IQtiComposerClient::DrawMethod client_drawMethod) { |
| auto status = HWC2::Error::None; |
| DisplayConfigFixedInfo fixed_config; |
| display_intf_->GetConfig(&fixed_config); |
| bool supports_unified_draw = fixed_config.supports_unified_draw; |
| if (!supports_unified_draw) { |
| // Check if driver support is present. |
| // If driver doesn't support return unsupported and set default method. |
| draw_method_ = kDrawDefault; |
| status = HWC2::Error::Unsupported; |
| DLOGI("Enabling default draw method"); |
| } else if (client_drawMethod != IQtiComposerClient::DrawMethod::UNIFIED_DRAW) { |
| // Driver supports unified draw. |
| // If client doesnt support unified draw, limit to kDrawUnified. |
| draw_method_ = kDrawUnified; |
| status = HWC2::Error::Unsupported; |
| DLOGI("Enabling unified draw"); |
| } else { |
| // Driver and client supports unified draw. |
| draw_method_ = kDrawUnifiedWithGPUTarget; |
| status = HWC2::Error::None; |
| DLOGI("Enabling unified draw with GPU target"); |
| } |
| |
| display_intf_->SetDrawMethod(draw_method_); |
| |
| draw_method_set_ = true; |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplay::SetReadbackBuffer(const native_handle_t *buffer, |
| shared_ptr<Fence> acquire_fence, |
| CwbConfig cwb_config, CWBClient client) { |
| if (current_power_mode_ == HWC2::PowerMode::Off || |
| current_power_mode_ == HWC2::PowerMode::DozeSuspend) { |
| DLOGW("CWB requested on either Powered-Off or Doze-Suspended display."); |
| return HWC2::Error::BadDisplay; |
| } |
| |
| if (secure_event_ != kSecureEventMax) { |
| DLOGE("CWB is not supported as TUI transition is in progress"); |
| return HWC2::Error::Unsupported; |
| } |
| |
| void *hdl = const_cast<native_handle_t *>(buffer); |
| |
| if (!buffer) { |
| DLOGE("Bad parameter: handle is null"); |
| return HWC2::Error::BadParameter; |
| } |
| |
| int fd; |
| gralloc::GetMetaDataValue(hdl, (int64_t)qtigralloc::MetadataType_FD.value, &fd); |
| if (fd < 0) { |
| DLOGE("Bad parameter: fd is null"); |
| return HWC2::Error::BadParameter; |
| } |
| |
| LayerBuffer output_buffer = {}; |
| // Configure the output buffer as Readback buffer |
| auto err = gralloc::GetMetaDataValue( |
| hdl, (int64_t)qtigralloc::MetadataType_AlignedWidthInPixels.value, &output_buffer.width); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve aligned width"); |
| } |
| err = gralloc::GetMetaDataValue( |
| hdl, (int64_t)qtigralloc::MetadataType_AlignedHeightInPixels.value, &output_buffer.height); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve aligned height"); |
| } |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)StandardMetadataType::WIDTH, |
| &output_buffer.unaligned_width); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve unaligned width"); |
| } |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)StandardMetadataType::HEIGHT, |
| &output_buffer.unaligned_height); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve unaligned height"); |
| } |
| int format, flag; |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)StandardMetadataType::PIXEL_FORMAT_REQUESTED, |
| &format); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve format"); |
| } |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)QTI_PRIVATE_FLAGS, &flag); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve flag"); |
| } |
| output_buffer.format = HWCLayer::GetSDMFormat(format, flag); |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)QTI_FD, &output_buffer.planes[0].fd); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve file descriptor"); |
| } |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)QTI_ALIGNED_WIDTH_IN_PIXELS, |
| &output_buffer.planes[0].stride); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve stride"); |
| } |
| err = gralloc::GetMetaDataValue(hdl, (int64_t)StandardMetadataType::BUFFER_ID, |
| &output_buffer.handle_id); |
| if (err != gralloc::Error::NONE) { |
| DLOGE("Failed to retrieve buffer id"); |
| } |
| |
| output_buffer.acquire_fence = acquire_fence; |
| |
| if (output_buffer.format == kFormatInvalid) { |
| DLOGW("Format %d is not supported by SDM", format); |
| return HWC2::Error::BadParameter; |
| } else if (!display_intf_->IsWriteBackSupportedFormat(output_buffer.format)) { |
| DLOGW("WB doesn't support color format : %s .", GetFormatString(output_buffer.format)); |
| return HWC2::Error::BadParameter; |
| } |
| |
| CwbConfig config = cwb_config; |
| LayerRect &roi = config.cwb_roi; |
| LayerRect &full_rect = config.cwb_full_rect; |
| CwbTapPoint &tap_point = config.tap_point; |
| |
| DisplayError error = kErrorNone; |
| error = display_intf_->CaptureCwb(output_buffer, config); |
| if (error) { |
| DLOGE("CaptureCwb failed"); |
| if (error == kErrorParameters) { |
| return HWC2::Error::BadParameter; |
| } else { |
| return HWC2::Error::Unsupported; |
| } |
| } |
| |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| cwb_buffer_map_.emplace(output_buffer.handle_id, client); |
| if (cwb_capture_status_map_[client].handle_id == output_buffer.handle_id) { |
| cwb_capture_status_map_.erase(client); |
| } |
| } |
| |
| DLOGV_IF(kTagClient, "CWB config from client: tap_point %d, CWB ROI Rect(%f %f %f %f), " |
| "PU_as_CWB_ROI %d, Cwb full rect : (%f %f %f %f)", tap_point, |
| roi.left, roi.top, roi.right, roi.bottom, config.pu_as_cwb_roi, |
| full_rect.left, full_rect.top, full_rect.right, full_rect.bottom); |
| |
| DLOGV_IF(kTagClient, "Successfully configured the output buffer: cwb_client %d", client); |
| |
| return HWC2::Error::None; |
| } |
| |
| CWBReleaseFenceError HWCDisplay::GetReadbackBufferFenceForClient(CWBClient client, |
| shared_ptr<Fence> *release_fence) { |
| if (client == kCWBClientNone) { |
| DLOGE("Invalid CWB client(%d) as argument detected!", client); |
| return kCWBReleaseFenceUnknownError; |
| } |
| |
| if (!release_fence) { |
| DLOGE("Null storage for shared pointer of release_fence argument detected, for client: %d", |
| client); |
| return kCWBReleaseFenceUnknownError; |
| } |
| |
| auto status = kCWBReleaseFenceErrorNone; |
| uint64_t handle_id = 0; |
| |
| *release_fence = nullptr; |
| // If release fence is available, then try to get it first and keep it out of lock to avoid |
| // deadlock with GetOutputBufferAcquireFence call, and validate it later with handle id. |
| display_intf_->GetOutputBufferAcquireFence(release_fence); |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| auto &cwb_resp = cwb_capture_status_map_[client]; |
| |
| if (cwb_resp.handle_id != 0) { |
| // If this function is called after either PostCommitLayerStack or NotifyCwbDone call, |
| // then release fence can be successfully retrieved from cwb_capture_status_map_. |
| handle_id = cwb_resp.handle_id; |
| if (cwb_resp.status != kCWBReleaseFenceNotChecked) { |
| *release_fence = cwb_resp.release_fence; |
| } |
| status = cwb_resp.status; |
| } else if (layer_stack_.output_buffer != nullptr) { |
| // If this function is called before both PostCommitLayerStack and NotifyCwbDone call, |
| // then handle_id may be retrieved directly from layer_stack_.output_buffer corresponding |
| // to available release fence. |
| const auto map_cwb_buffer = cwb_buffer_map_.find(layer_stack_.output_buffer->handle_id); |
| if (map_cwb_buffer != cwb_buffer_map_.end() && client == map_cwb_buffer->second) { |
| handle_id = layer_stack_.output_buffer->handle_id; |
| status = kCWBReleaseFenceNotChecked; |
| } |
| } else { |
| // If this function is called too early, then just need to check that cwb request is |
| // persisting, which helps to decide the return status. |
| for (auto [id, cl] : cwb_buffer_map_) { |
| if (cl == client) { |
| handle_id = id; |
| break; |
| } |
| } |
| // Avoid to return old release fence, in case of too early call of this function. |
| *release_fence = nullptr; |
| } |
| |
| if (*release_fence != nullptr) { |
| // If release fence is successfully retrieved, then no need to keep buffer-client map |
| // for this fence any more. |
| cwb_buffer_map_.erase(handle_id); |
| cwb_capture_status_map_.erase(client); |
| } |
| } |
| |
| if (handle_id != 0) { |
| if (*release_fence == nullptr) { |
| // If this function is called before commit call or during prepare call, and layer_stack |
| // output_buffer is configured, then need to call this function again after few |
| // milliseconds, such that commit could execute during this period to get updated |
| // release fence. |
| DLOGV_IF(kTagQDCM, "Need to wait for release fence, and retry to get it for client:%d, " |
| "buffer_id: %u", client, handle_id); |
| status = kCWBReleaseFencePending; |
| } |
| } else { |
| DLOGV_IF(kTagQDCM, "There is no anymore readback buffer fence available for client = %d.", |
| client); |
| status = kCWBReleaseFenceNotAvailable; |
| } |
| |
| // Add logs out of sync locked section instead of inline at status update location to avoid |
| // unnecessary increment in latency for execution of another resource dependent threads. |
| if (status == kCWBReleaseFenceNotChecked || status == kCWBReleaseFenceWaitTimedOut) { |
| DLOGV_IF(kTagQDCM, "Fence is available, but either fence wait is timed-out, or " |
| "CWB Manager is not yet notified for client:%d, buffer_id: %u", client, handle_id); |
| } else if (status == kCWBReleaseFenceUnknownError) { |
| DLOGE("CWB Manager notified unknown error for client:%d, buffer_id: %u", client, handle_id); |
| } |
| |
| return status; |
| } |
| |
| HWC2::Error HWCDisplay::GetReadbackBufferFence(shared_ptr<Fence> *release_fence) { |
| auto status = HWC2::Error::None; |
| // Get the release fence for kCWBClientComposer only, because this function is designed for |
| // accessing through composer interface, for which, it is following standard prototype and |
| // return type provided by HWC2+ interface. According to HWC2+ interface, only two supported |
| // return types are provided, where one is HWC2::Error::None and another is |
| // HWC2::Error::Unsupported. |
| auto error = GetReadbackBufferFenceForClient(kCWBClientComposer, release_fence); |
| |
| // if release fence is null pointer, then just return with error. |
| if (!release_fence || *release_fence == nullptr) { |
| status = HWC2::Error::Unsupported; |
| DLOGW("Readback buffer fence is not available! CWBReleaseFenceError: %d", error); |
| } |
| |
| return status; |
| } |
| |
| void HWCDisplay::HandleFrameOutput() { |
| // Block on output buffer fence if client is internal. |
| // External clients will wait on their thread. |
| CWBClient client = kCWBClientNone; |
| uint64_t handle_id = 0; |
| |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| if (layer_stack_.output_buffer != nullptr) { |
| handle_id = layer_stack_.output_buffer->handle_id; |
| const auto map_cwb_buffer = cwb_buffer_map_.find(handle_id); |
| if (map_cwb_buffer != cwb_buffer_map_.end()) { |
| client = map_cwb_buffer->second; |
| auto &cwb_resp = cwb_capture_status_map_[client]; |
| cwb_resp.handle_id = handle_id; |
| cwb_resp.client = client; |
| cwb_resp.status = kCWBReleaseFenceNotChecked; // CWB request status is not yet notified |
| } else { |
| for (auto& [_, ccs] : cwb_capture_status_map_) { |
| if (ccs.handle_id == handle_id) { |
| client = ccs.client; |
| break; |
| } |
| } |
| } |
| } else { |
| for (auto& [_, ccs] : cwb_capture_status_map_) { |
| if (ccs.handle_id != 0) { |
| client = ccs.client; |
| handle_id = ccs.handle_id; |
| break; |
| } |
| } |
| } |
| } |
| |
| if (client == kCWBClientColor) { |
| DLOGV_IF(kTagQDCM, "frame_capture_buffer_queued_ is in use. Handle frame capture."); |
| HandleFrameCapture(); |
| } else if (client == kCWBClientFrameDump) { |
| DLOGV_IF(kTagQDCM, "dump_output_to_file is in use. Handle frame dump."); |
| HandleFrameDump(); |
| } |
| } |
| |
| void HWCDisplay::HandleFrameDump() { |
| if (!dump_frame_count_) { |
| return; |
| } |
| |
| auto ret = kCWBReleaseFenceErrorNone; |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| auto &cwb_resp = cwb_capture_status_map_[kCWBClientFrameDump]; |
| // If CWB request status is not notified, then need to wait for the notification. |
| if (cwb_resp.status == kCWBReleaseFenceNotChecked) { |
| if (cwb_cv_.wait_until( |
| lock, std::chrono::system_clock::now() + std::chrono::milliseconds(kCwbWaitMs)) == |
| std::cv_status::timeout) { |
| DLOGW("CWB notification wait timed out, it would be handled in next cycle."); |
| // Return to handle the notification in next cycle, if release fence is not yet notified. |
| return; |
| } |
| } |
| ret = cwb_resp.status; |
| cwb_capture_status_map_.erase(kCWBClientFrameDump); |
| } |
| |
| if (!ret || ret == kCWBReleaseFenceWaitTimedOut) { |
| // On fence wait timeout, we could dump the frame, because timeout means it waited for |
| // one second for signal, and which might got delayed due to some flushing and resource |
| // releasing operations during certain power glitch event. So, we can assume that buffer |
| // writing operation is over after timeout. |
| DumpOutputBuffer(output_buffer_info_, output_buffer_base_, layer_stack_.retire_fence); |
| if (ret == kCWBReleaseFenceWaitTimedOut) { |
| DLOGW("CWB frame-%d dump may be empty due to fence timeout on any unexpected event!", |
| dump_frame_index_); |
| } |
| } else { |
| // CwbManager notifies -1 (unknown error) on power down or tear down, where -1 means, last |
| // request is not processed by CwbManager and tried to flush the CWB pending requests from |
| // CWB request queue. |
| DLOGW("Probably, power/tear down occured during the cwb request. So, dropped off frame-%d.", |
| dump_frame_index_); |
| } |
| |
| bool stop_frame_dump = false; |
| if (0 == (dump_frame_count_ - 1)) { |
| stop_frame_dump = true; |
| } else { |
| const native_handle_t *hnd = static_cast<native_handle_t *>(output_buffer_info_.private_data); |
| HWC2::Error err = SetReadbackBuffer(hnd, nullptr, output_buffer_cwb_config_, |
| kCWBClientFrameDump); |
| if (err != HWC2::Error::None) { |
| stop_frame_dump = true; |
| DLOGE("Unexpectedly stopped dumping of remaining %d frames for frame indices %d onwards!", |
| dump_frame_count_, dump_frame_index_); |
| } else { |
| dump_frame_count_--; |
| dump_frame_index_++; |
| } |
| } |
| |
| if (stop_frame_dump) { |
| dump_output_to_file_ = false; |
| // Unmap and Free buffer |
| if (munmap(output_buffer_base_, output_buffer_info_.alloc_buffer_info.size) != 0) { |
| DLOGE("unmap failed with err %d", errno); |
| } |
| |
| if (buffer_allocator_->FreeBuffer(&output_buffer_info_) != 0) { |
| DLOGE("FreeBuffer failed"); |
| } |
| |
| output_buffer_info_ = {}; |
| output_buffer_base_ = nullptr; |
| output_buffer_cwb_config_ = {}; |
| dump_frame_count_ = 0; |
| dump_frame_index_ = 0; |
| } |
| } |
| |
| DisplayError HWCDisplay::HandleQsyncState(const QsyncEventData &qsync_data) { |
| event_handler_->PerformQsyncCallback(id_, qsync_data.enabled, |
| qsync_data.refresh_rate, |
| qsync_data.qsync_refresh_rate); |
| return kErrorNone; |
| } |
| |
| HWC2::Error HWCDisplay::GetClientTargetProperty(ClientTargetProperty *out_client_target_property) { |
| |
| Layer *client_layer = client_target_->GetSDMLayer(); |
| if (!client_layer->request.flags.update_format) { |
| return HWC2::Error::None; |
| } |
| int32_t format = 0; |
| uint64_t flags = 0; |
| auto err = buffer_allocator_->SetBufferInfo(client_layer->request.format, &format, &flags); |
| if (err) { |
| DLOGE("Invalid format: %s requested", GetFormatString(client_layer->request.format)); |
| return HWC2::Error::BadParameter; |
| } |
| Dataspace dataspace; |
| DisplayError error = ColorMetadataToDataspace(client_layer->request.color_metadata, &dataspace); |
| if (error != kErrorNone) { |
| DLOGE("Invalid Dataspace requested: Primaries = %d Transfer = %d ds = %d", |
| client_layer->request.color_metadata.colorPrimaries, |
| client_layer->request.color_metadata.transfer, dataspace); |
| return HWC2::Error::BadParameter; |
| } |
| out_client_target_property->dataspace = dataspace; |
| out_client_target_property->pixelFormat = |
| (android::hardware::graphics::common::V1_2::PixelFormat)format; |
| |
| return HWC2::Error::None; |
| } |
| |
| void HWCDisplay::GetConfigInfo(std::map<uint32_t, DisplayConfigVariableInfo> *variable_config_map, |
| int *active_config_index, uint32_t *num_configs) { |
| *variable_config_map = variable_config_map_; |
| *active_config_index = active_config_index_; |
| *num_configs = num_configs_; |
| } |
| |
| void HWCDisplay::NotifyCwbDone(int32_t status, const LayerBuffer& buffer) { |
| CWBClient client = kCWBClientNone; |
| uint64_t handle_id = buffer.handle_id; |
| |
| { |
| std::unique_lock<std::mutex> lock(cwb_mutex_); |
| |
| const auto map_cwb_buffer = cwb_buffer_map_.find(handle_id); |
| if (map_cwb_buffer == cwb_buffer_map_.end()) { |
| DLOGV_IF(kTagClient, "CWB Buffer(id = %u) not found in buffer-client map", handle_id); |
| return; |
| } |
| client = map_cwb_buffer->second; |
| |
| auto &cwb_cap_status = cwb_capture_status_map_[client]; |
| cwb_cap_status.handle_id = handle_id; |
| cwb_cap_status.client = client; |
| cwb_cap_status.release_fence = buffer.release_fence; |
| |
| if (!status) { |
| cwb_cap_status.status = kCWBReleaseFenceSignaled; |
| } else if (status == -ETIME) { |
| cwb_cap_status.status = kCWBReleaseFenceWaitTimedOut; |
| } else { |
| cwb_cap_status.status = kCWBReleaseFenceUnknownError; |
| } |
| cwb_buffer_map_.erase(handle_id); |
| if (client == kCWBClientFrameDump || client == kCWBClientColor) { |
| cwb_cv_.notify_one(); |
| } else if (client == kCWBClientExternal && event_handler_) { |
| // Clear the backup data like release fence and status corresponding to handle id, |
| // when successfully notified to client. |
| if (!event_handler_->NotifyCwbDone(id_, status, handle_id)) { |
| cwb_capture_status_map_.erase(client); |
| } |
| } |
| } |
| |
| DLOGV_IF(kTagClient, "CWB notified for client = %d with buffer = %u, return status = %s(%d)", |
| client, handle_id, (!status) ? "Handled" : (status == -ETIME) ? "Timedout" : "Error", |
| status); |
| } |
| |
| void HWCDisplay::Abort() { |
| display_intf_->Abort(); |
| } |
| |
| void HWCDisplay::MarkClientActive(bool is_client_up) { |
| is_client_up_ = is_client_up ; |
| } |
| } // namespace sdm |