| /* |
| * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "audio_hw_primary" |
| /*#define LOG_NDEBUG 0*/ |
| /*#define VERY_VERY_VERBOSE_LOGGING*/ |
| #ifdef VERY_VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <sys/time.h> |
| #include <stdlib.h> |
| #include <math.h> |
| #include <dlfcn.h> |
| #include <sys/resource.h> |
| #include <sys/prctl.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/str_parms.h> |
| #include <cutils/properties.h> |
| #include <cutils/atomic.h> |
| #include <cutils/sched_policy.h> |
| |
| #include <hardware/audio_effect.h> |
| #include <system/thread_defs.h> |
| #include <audio_effects/effect_aec.h> |
| #include <audio_effects/effect_ns.h> |
| #include "audio_hw.h" |
| #include "platform_api.h" |
| #include <platform.h> |
| #include "audio_extn.h" |
| #include "voice_extn.h" |
| |
| #include "sound/compress_params.h" |
| #define MAX_COMPRESS_OFFLOAD_FRAGMENT_SIZE (256 * 1024) |
| #define MIN_COMPRESS_OFFLOAD_FRAGMENT_SIZE (8 * 1024) |
| #define COMPRESS_OFFLOAD_FRAGMENT_SIZE (32 * 1024) |
| #define COMPRESS_OFFLOAD_NUM_FRAGMENTS 4 |
| /* ToDo: Check and update a proper value in msec */ |
| #define COMPRESS_OFFLOAD_PLAYBACK_LATENCY 96 |
| #define COMPRESS_PLAYBACK_VOLUME_MAX 0x2000 |
| |
| #define USECASE_AUDIO_PLAYBACK_PRIMARY USECASE_AUDIO_PLAYBACK_DEEP_BUFFER |
| |
| struct pcm_config pcm_config_deep_buffer = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = DEEP_BUFFER_OUTPUT_PERIOD_SIZE, |
| .period_count = DEEP_BUFFER_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| struct pcm_config pcm_config_low_latency = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = LOW_LATENCY_OUTPUT_PERIOD_SIZE, |
| .period_count = LOW_LATENCY_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| struct pcm_config pcm_config_hdmi_multi = { |
| .channels = HDMI_MULTI_DEFAULT_CHANNEL_COUNT, /* changed when the stream is opened */ |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, /* changed when the stream is opened */ |
| .period_size = HDMI_MULTI_PERIOD_SIZE, |
| .period_count = HDMI_MULTI_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .avail_min = 0, |
| }; |
| |
| struct pcm_config pcm_config_audio_capture = { |
| .channels = 2, |
| .period_count = AUDIO_CAPTURE_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| }; |
| |
| const char * const use_case_table[AUDIO_USECASE_MAX] = { |
| [USECASE_AUDIO_PLAYBACK_DEEP_BUFFER] = "deep-buffer-playback", |
| [USECASE_AUDIO_PLAYBACK_LOW_LATENCY] = "low-latency-playback", |
| [USECASE_AUDIO_PLAYBACK_MULTI_CH] = "multi-channel-playback", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD] = "compress-offload-playback", |
| [USECASE_AUDIO_RECORD] = "audio-record", |
| [USECASE_AUDIO_RECORD_COMPRESS] = "audio-record-compress", |
| [USECASE_AUDIO_RECORD_LOW_LATENCY] = "low-latency-record", |
| [USECASE_AUDIO_RECORD_FM_VIRTUAL] = "fm-virtual-record", |
| [USECASE_AUDIO_PLAYBACK_FM] = "play-fm", |
| [USECASE_AUDIO_HFP_SCO] = "hfp-sco", |
| [USECASE_AUDIO_HFP_SCO_WB] = "hfp-sco-wb", |
| [USECASE_VOICE_CALL] = "voice-call", |
| |
| [USECASE_VOICE2_CALL] = "voice2-call", |
| [USECASE_VOLTE_CALL] = "volte-call", |
| [USECASE_QCHAT_CALL] = "qchat-call", |
| [USECASE_COMPRESS_VOIP_CALL] = "compress-voip-call", |
| [USECASE_INCALL_REC_UPLINK] = "incall-rec-uplink", |
| [USECASE_INCALL_REC_DOWNLINK] = "incall-rec-downlink", |
| [USECASE_INCALL_REC_UPLINK_AND_DOWNLINK] = "incall-rec-uplink-and-downlink", |
| [USECASE_INCALL_REC_UPLINK_COMPRESS] = "incall-rec-uplink-compress", |
| [USECASE_INCALL_REC_DOWNLINK_COMPRESS] = "incall-rec-downlink-compress", |
| [USECASE_INCALL_REC_UPLINK_AND_DOWNLINK_COMPRESS] = "incall-rec-uplink-and-downlink-compress", |
| |
| [USECASE_INCALL_MUSIC_UPLINK] = "incall_music_uplink", |
| [USECASE_INCALL_MUSIC_UPLINK2] = "incall_music_uplink2", |
| [USECASE_AUDIO_SPKR_CALIB_RX] = "spkr-rx-calib", |
| [USECASE_AUDIO_SPKR_CALIB_TX] = "spkr-vi-record", |
| }; |
| |
| |
| #define STRING_TO_ENUM(string) { #string, string } |
| |
| struct string_to_enum { |
| const char *name; |
| uint32_t value; |
| }; |
| |
| static const struct string_to_enum out_channels_name_to_enum_table[] = { |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_STEREO), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_5POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_7POINT1), |
| }; |
| |
| static struct audio_device *adev = NULL; |
| static pthread_mutex_t adev_init_lock; |
| static unsigned int audio_device_ref_count; |
| |
| static int set_voice_volume_l(struct audio_device *adev, float volume); |
| |
| /* Read offload buffer size from a property. |
| * If value is not power of 2 round it to |
| * power of 2. |
| */ |
| static uint32_t get_offload_buffer_size() |
| { |
| char value[PROPERTY_VALUE_MAX] = {0}; |
| uint32_t fragment_size = COMPRESS_OFFLOAD_FRAGMENT_SIZE; |
| if((property_get("audio.offload.buffer.size.kb", value, "")) && |
| atoi(value)) { |
| fragment_size = atoi(value) * 1024; |
| //ring buffer size needs to be 4k aligned. |
| CHECK(!(fragment_size * COMPRESS_OFFLOAD_NUM_FRAGMENTS % 4096)); |
| } |
| if(fragment_size < MIN_COMPRESS_OFFLOAD_FRAGMENT_SIZE) |
| fragment_size = MIN_COMPRESS_OFFLOAD_FRAGMENT_SIZE; |
| else if(fragment_size > MAX_COMPRESS_OFFLOAD_FRAGMENT_SIZE) |
| fragment_size = MAX_COMPRESS_OFFLOAD_FRAGMENT_SIZE; |
| ALOGVV("%s: fragment_size %d", __func__, fragment_size); |
| return fragment_size; |
| } |
| |
| static int check_and_set_gapless_mode(struct audio_device *adev) { |
| |
| |
| char value[PROPERTY_VALUE_MAX] = {0}; |
| bool gapless_enabled = false; |
| const char *mixer_ctl_name = "Compress Gapless Playback"; |
| struct mixer_ctl *ctl; |
| |
| ALOGV("%s:", __func__); |
| property_get("audio.offload.gapless.enabled", value, NULL); |
| gapless_enabled = atoi(value) || !strncmp("true", value, 4); |
| |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, mixer_ctl_name); |
| return -EINVAL; |
| } |
| |
| if (mixer_ctl_set_value(ctl, 0, gapless_enabled) < 0) { |
| ALOGE("%s: Could not set gapless mode %d", |
| __func__, gapless_enabled); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static bool is_supported_format(audio_format_t format) |
| { |
| if (format == AUDIO_FORMAT_MP3 || |
| format == AUDIO_FORMAT_AAC) |
| return true; |
| |
| return false; |
| } |
| |
| static int get_snd_codec_id(audio_format_t format) |
| { |
| int id = 0; |
| |
| switch (format) { |
| case AUDIO_FORMAT_MP3: |
| id = SND_AUDIOCODEC_MP3; |
| break; |
| case AUDIO_FORMAT_AAC: |
| id = SND_AUDIOCODEC_AAC; |
| break; |
| default: |
| ALOGE("%s: Unsupported audio format :%x", __func__, format); |
| } |
| |
| return id; |
| } |
| |
| int enable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase, |
| bool update_mixer) |
| { |
| snd_device_t snd_device; |
| char mixer_path[MIXER_PATH_MAX_LENGTH]; |
| |
| if (usecase == NULL) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| |
| #ifdef DS1_DOLBY_DAP_ENABLED |
| audio_extn_dolby_set_dmid(adev); |
| audio_extn_dolby_set_endpoint(adev); |
| #endif |
| strcpy(mixer_path, use_case_table[usecase->id]); |
| platform_add_backend_name(mixer_path, snd_device); |
| ALOGV("%s: apply mixer path: %s", __func__, mixer_path); |
| audio_route_apply_path(adev->audio_route, mixer_path); |
| if (update_mixer) |
| audio_route_update_mixer(adev->audio_route); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int disable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase, |
| bool update_mixer) |
| { |
| snd_device_t snd_device; |
| char mixer_path[MIXER_PATH_MAX_LENGTH]; |
| |
| if (usecase == NULL) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| strcpy(mixer_path, use_case_table[usecase->id]); |
| platform_add_backend_name(mixer_path, snd_device); |
| ALOGV("%s: reset mixer path: %s", __func__, mixer_path); |
| audio_route_reset_path(adev->audio_route, mixer_path); |
| if (update_mixer) |
| audio_route_update_mixer(adev->audio_route); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int enable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device, |
| bool update_mixer) |
| { |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| return -EINVAL; |
| } |
| |
| adev->snd_dev_ref_cnt[snd_device]++; |
| |
| if(platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0 ) { |
| ALOGE("%s: Invalid sound device returned", __func__); |
| return -EINVAL; |
| } |
| if (adev->snd_dev_ref_cnt[snd_device] > 1) { |
| ALOGV("%s: snd_device(%d: %s) is already active", |
| __func__, snd_device, device_name); |
| return 0; |
| } |
| |
| /* start usb playback thread */ |
| if(SND_DEVICE_OUT_USB_HEADSET == snd_device || |
| SND_DEVICE_OUT_SPEAKER_AND_USB_HEADSET == snd_device) |
| audio_extn_usb_start_playback(adev); |
| |
| /* start usb capture thread */ |
| if(SND_DEVICE_IN_USB_HEADSET_MIC == snd_device) |
| audio_extn_usb_start_capture(adev); |
| |
| if (snd_device == SND_DEVICE_OUT_SPEAKER && |
| audio_extn_spkr_prot_is_enabled()) { |
| if (audio_extn_spkr_prot_start_processing(snd_device)) { |
| ALOGE("%s: spkr_start_processing failed", __func__); |
| return -EINVAL; |
| } |
| } else { |
| ALOGV("%s: snd_device(%d: %s)", __func__, |
| snd_device, device_name); |
| if (platform_send_audio_calibration(adev->platform, snd_device) < 0) { |
| adev->snd_dev_ref_cnt[snd_device]--; |
| return -EINVAL; |
| } |
| audio_extn_listen_update_status(snd_device, |
| LISTEN_EVENT_SND_DEVICE_BUSY); |
| |
| audio_route_apply_path(adev->audio_route, device_name); |
| } |
| if (update_mixer) |
| audio_route_update_mixer(adev->audio_route); |
| |
| return 0; |
| } |
| |
| int disable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device, |
| bool update_mixer) |
| { |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| return -EINVAL; |
| } |
| if (adev->snd_dev_ref_cnt[snd_device] <= 0) { |
| ALOGE("%s: device ref cnt is already 0", __func__); |
| return -EINVAL; |
| } |
| |
| adev->snd_dev_ref_cnt[snd_device]--; |
| |
| if(platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0) { |
| ALOGE("%s: Invalid sound device returned", __func__); |
| return -EINVAL; |
| } |
| |
| if (adev->snd_dev_ref_cnt[snd_device] == 0) { |
| ALOGV("%s: snd_device(%d: %s)", __func__, |
| snd_device, device_name); |
| /* exit usb play back thread */ |
| if(SND_DEVICE_OUT_USB_HEADSET == snd_device || |
| SND_DEVICE_OUT_SPEAKER_AND_USB_HEADSET == snd_device) |
| audio_extn_usb_stop_playback(); |
| |
| /* exit usb capture thread */ |
| if(SND_DEVICE_IN_USB_HEADSET_MIC == snd_device) |
| audio_extn_usb_stop_capture(adev); |
| |
| if (snd_device == SND_DEVICE_OUT_SPEAKER && |
| audio_extn_spkr_prot_is_enabled()) { |
| audio_extn_spkr_prot_stop_processing(); |
| } else |
| audio_route_reset_path(adev->audio_route, device_name); |
| |
| if (update_mixer) |
| audio_route_update_mixer(adev->audio_route); |
| |
| audio_extn_listen_update_status(snd_device, |
| LISTEN_EVENT_SND_DEVICE_FREE); |
| } |
| |
| return 0; |
| } |
| |
| static void check_usecases_codec_backend(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| |
| /* |
| * This function is to make sure that all the usecases that are active on |
| * the hardware codec backend are always routed to any one device that is |
| * handled by the hardware codec. |
| * For example, if low-latency and deep-buffer usecases are currently active |
| * on speaker and out_set_parameters(headset) is received on low-latency |
| * output, then we have to make sure deep-buffer is also switched to headset, |
| * because of the limitation that both the devices cannot be enabled |
| * at the same time as they share the same backend. |
| */ |
| /* Disable all the usecases on the shared backend other than the |
| specified usecase */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type != PCM_CAPTURE && |
| usecase != uc_info && |
| usecase->out_snd_device != snd_device && |
| usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) { |
| ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->out_snd_device)); |
| disable_audio_route(adev, usecase, false); |
| switch_device[usecase->id] = true; |
| num_uc_to_switch++; |
| } |
| } |
| |
| if (num_uc_to_switch) { |
| /* Make sure all the streams are de-routed before disabling the device */ |
| audio_route_update_mixer(adev->audio_route); |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->out_snd_device, false); |
| } |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| enable_snd_device(adev, snd_device, false); |
| } |
| } |
| |
| /* Make sure new snd device is enabled before re-routing the streams */ |
| audio_route_update_mixer(adev->audio_route); |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* Update the out_snd_device only before enabling the audio route */ |
| if (switch_device[usecase->id] ) { |
| usecase->out_snd_device = snd_device; |
| enable_audio_route(adev, usecase, false); |
| } |
| } |
| } |
| } |
| |
| static void check_and_route_capture_usecases(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| |
| /* |
| * This function is to make sure that all the active capture usecases |
| * are always routed to the same input sound device. |
| * For example, if audio-record and voice-call usecases are currently |
| * active on speaker(rx) and speaker-mic (tx) and out_set_parameters(earpiece) |
| * is received for voice call then we have to make sure that audio-record |
| * usecase is also switched to earpiece i.e. voice-dmic-ef, |
| * because of the limitation that two devices cannot be enabled |
| * at the same time if they share the same backend. |
| */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type != PCM_PLAYBACK && |
| usecase != uc_info && |
| usecase->in_snd_device != snd_device) { |
| ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->in_snd_device)); |
| disable_audio_route(adev, usecase, false); |
| switch_device[usecase->id] = true; |
| num_uc_to_switch++; |
| } |
| } |
| |
| if (num_uc_to_switch) { |
| /* Make sure all the streams are de-routed before disabling the device */ |
| audio_route_update_mixer(adev->audio_route); |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->in_snd_device, false); |
| } |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| enable_snd_device(adev, snd_device, false); |
| } |
| } |
| |
| /* Make sure new snd device is enabled before re-routing the streams */ |
| audio_route_update_mixer(adev->audio_route); |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* Update the in_snd_device only before enabling the audio route */ |
| if (switch_device[usecase->id] ) { |
| usecase->in_snd_device = snd_device; |
| enable_audio_route(adev, usecase, false); |
| } |
| } |
| } |
| } |
| |
| /* must be called with hw device mutex locked */ |
| static int read_hdmi_channel_masks(struct stream_out *out) |
| { |
| int ret = 0; |
| int channels = platform_edid_get_max_channels(out->dev->platform); |
| |
| switch (channels) { |
| /* |
| * Do not handle stereo output in Multi-channel cases |
| * Stereo case is handled in normal playback path |
| */ |
| case 6: |
| ALOGV("%s: HDMI supports 5.1", __func__); |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_5POINT1; |
| break; |
| case 8: |
| ALOGV("%s: HDMI supports 5.1 and 7.1 channels", __func__); |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_5POINT1; |
| out->supported_channel_masks[1] = AUDIO_CHANNEL_OUT_7POINT1; |
| break; |
| default: |
| ALOGE("HDMI does not support multi channel playback"); |
| ret = -ENOSYS; |
| break; |
| } |
| return ret; |
| } |
| |
| static void update_devices_for_all_voice_usecases(struct audio_device *adev) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == VOICE_CALL) { |
| ALOGV("%s: updating device for usecase:%s", __func__, |
| use_case_table[usecase->id]); |
| select_devices(adev, usecase->id); |
| } |
| } |
| } |
| |
| static audio_usecase_t get_voice_usecase_id_from_list(struct audio_device *adev) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == VOICE_CALL) { |
| ALOGV("%s: usecase id %d", __func__, usecase->id); |
| return usecase->id; |
| } |
| } |
| return USECASE_INVALID; |
| } |
| |
| struct audio_usecase *get_usecase_from_list(struct audio_device *adev, |
| audio_usecase_t uc_id) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->id == uc_id) |
| return usecase; |
| } |
| return NULL; |
| } |
| |
| int select_devices(struct audio_device *adev, audio_usecase_t uc_id) |
| { |
| snd_device_t out_snd_device = SND_DEVICE_NONE; |
| snd_device_t in_snd_device = SND_DEVICE_NONE; |
| struct audio_usecase *usecase = NULL; |
| struct audio_usecase *vc_usecase = NULL; |
| struct audio_usecase *voip_usecase = NULL; |
| struct audio_usecase *hfp_usecase = NULL; |
| struct listnode *node; |
| int status = 0; |
| |
| usecase = get_usecase_from_list(adev, uc_id); |
| if (usecase == NULL) { |
| ALOGE("%s: Could not find the usecase(%d)", __func__, uc_id); |
| return -EINVAL; |
| } |
| |
| if ((usecase->type == VOICE_CALL) || |
| (usecase->type == VOIP_CALL) || |
| (usecase->type == PCM_HFP_CALL)) { |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out->devices); |
| in_snd_device = platform_get_input_snd_device(adev->platform, usecase->stream.out->devices); |
| usecase->devices = usecase->stream.out->devices; |
| } else { |
| /* |
| * If the voice call is active, use the sound devices of voice call usecase |
| * so that it would not result any device switch. All the usecases will |
| * be switched to new device when select_devices() is called for voice call |
| * usecase. This is to avoid switching devices for voice call when |
| * check_usecases_codec_backend() is called below. |
| */ |
| if (voice_is_in_call(adev)) { |
| vc_usecase = get_usecase_from_list(adev, |
| get_voice_usecase_id_from_list(adev)); |
| if ((vc_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) || |
| (usecase->devices == AUDIO_DEVICE_IN_VOICE_CALL)) { |
| in_snd_device = vc_usecase->in_snd_device; |
| out_snd_device = vc_usecase->out_snd_device; |
| } |
| } else if (voice_extn_compress_voip_is_active(adev)) { |
| voip_usecase = get_usecase_from_list(adev, USECASE_COMPRESS_VOIP_CALL); |
| if (voip_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) { |
| in_snd_device = voip_usecase->in_snd_device; |
| out_snd_device = voip_usecase->out_snd_device; |
| } |
| } else if (audio_extn_hfp_is_active(adev)) { |
| hfp_usecase = get_usecase_from_list(adev, USECASE_AUDIO_HFP_SCO); |
| if (hfp_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) { |
| in_snd_device = hfp_usecase->in_snd_device; |
| out_snd_device = hfp_usecase->out_snd_device; |
| } |
| } |
| if (usecase->type == PCM_PLAYBACK) { |
| usecase->devices = usecase->stream.out->devices; |
| in_snd_device = SND_DEVICE_NONE; |
| if (out_snd_device == SND_DEVICE_NONE) { |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out->devices); |
| if (usecase->stream.out == adev->primary_output && |
| adev->active_input && |
| adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION) { |
| select_devices(adev, adev->active_input->usecase); |
| } |
| } |
| } else if (usecase->type == PCM_CAPTURE) { |
| usecase->devices = usecase->stream.in->device; |
| out_snd_device = SND_DEVICE_NONE; |
| if (in_snd_device == SND_DEVICE_NONE) { |
| if (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION && |
| adev->primary_output && !adev->primary_output->standby) { |
| in_snd_device = platform_get_input_snd_device(adev->platform, |
| adev->primary_output->devices); |
| } else { |
| in_snd_device = platform_get_input_snd_device(adev->platform, |
| AUDIO_DEVICE_NONE); |
| } |
| } |
| } |
| } |
| |
| if (out_snd_device == usecase->out_snd_device && |
| in_snd_device == usecase->in_snd_device) { |
| return 0; |
| } |
| |
| ALOGD("%s: out_snd_device(%d: %s) in_snd_device(%d: %s)", __func__, |
| out_snd_device, platform_get_snd_device_name(out_snd_device), |
| in_snd_device, platform_get_snd_device_name(in_snd_device)); |
| |
| /* |
| * Limitation: While in call, to do a device switch we need to disable |
| * and enable both RX and TX devices though one of them is same as current |
| * device. |
| */ |
| if (usecase->type == VOICE_CALL || usecase->type == VOIP_CALL) { |
| status = platform_switch_voice_call_device_pre(adev->platform); |
| } |
| |
| /* Disable current sound devices */ |
| if (usecase->out_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase, true); |
| disable_snd_device(adev, usecase->out_snd_device, false); |
| } |
| |
| if (usecase->in_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase, true); |
| disable_snd_device(adev, usecase->in_snd_device, false); |
| } |
| |
| /* Enable new sound devices */ |
| if (out_snd_device != SND_DEVICE_NONE) { |
| if (usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) |
| check_usecases_codec_backend(adev, usecase, out_snd_device); |
| enable_snd_device(adev, out_snd_device, false); |
| } |
| |
| if (in_snd_device != SND_DEVICE_NONE) { |
| check_and_route_capture_usecases(adev, usecase, in_snd_device); |
| enable_snd_device(adev, in_snd_device, false); |
| } |
| |
| if (usecase->type == VOICE_CALL || usecase->type == VOIP_CALL) |
| status = platform_switch_voice_call_device_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| |
| audio_route_update_mixer(adev->audio_route); |
| |
| usecase->in_snd_device = in_snd_device; |
| usecase->out_snd_device = out_snd_device; |
| |
| enable_audio_route(adev, usecase, true); |
| |
| /* Applicable only on the targets that has external modem. |
| * Enable device command should be sent to modem only after |
| * enabling voice call mixer controls |
| */ |
| if (usecase->type == VOICE_CALL) |
| status = platform_switch_voice_call_usecase_route_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| |
| return status; |
| } |
| |
| static int stop_input_stream(struct stream_in *in) |
| { |
| int i, ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| |
| adev->active_input = NULL; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| in->usecase, use_case_table[in->usecase]); |
| uc_info = get_usecase_from_list(adev, in->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, in->usecase); |
| return -EINVAL; |
| } |
| |
| /* Close in-call recording streams */ |
| voice_check_and_stop_incall_rec_usecase(adev, in); |
| |
| /* 1. Disable stream specific mixer controls */ |
| disable_audio_route(adev, uc_info, true); |
| |
| /* 2. Disable the tx device */ |
| disable_snd_device(adev, uc_info->in_snd_device, true); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_input_stream(struct stream_in *in) |
| { |
| /* 1. Enable output device and stream routing controls */ |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| |
| in->usecase = platform_update_usecase_from_source(in->source,in->usecase); |
| ALOGV("%s: enter: usecase(%d)", __func__, in->usecase); |
| |
| /* Check if source matches incall recording usecase criteria */ |
| ret = voice_check_and_set_incall_rec_usecase(adev, in); |
| if (ret) |
| goto error_config; |
| else |
| ALOGV("%s: usecase(%d)", __func__, in->usecase); |
| |
| in->pcm_device_id = platform_get_pcm_device_id(in->usecase, PCM_CAPTURE); |
| if (in->pcm_device_id < 0) { |
| ALOGE("%s: Could not find PCM device id for the usecase(%d)", |
| __func__, in->usecase); |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| adev->active_input = in; |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| uc_info->id = in->usecase; |
| uc_info->type = PCM_CAPTURE; |
| uc_info->stream.in = in; |
| uc_info->devices = in->device; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| select_devices(adev, in->usecase); |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d), channels %d", |
| __func__, adev->snd_card, |
| in->pcm_device_id, in->config.channels); |
| in->pcm = pcm_open(adev->snd_card, |
| in->pcm_device_id, PCM_IN, &in->config); |
| if (in->pcm && !pcm_is_ready(in->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(in->pcm)); |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| ret = -EIO; |
| goto error_open; |
| } |
| ALOGV("%s: exit", __func__); |
| return ret; |
| |
| error_open: |
| stop_input_stream(in); |
| |
| error_config: |
| adev->active_input = NULL; |
| ALOGD("%s: exit: status(%d)", __func__, ret); |
| |
| return ret; |
| } |
| |
| /* must be called with out->lock locked */ |
| static int send_offload_cmd_l(struct stream_out* out, int command) |
| { |
| struct offload_cmd *cmd = (struct offload_cmd *)calloc(1, sizeof(struct offload_cmd)); |
| |
| ALOGVV("%s %d", __func__, command); |
| |
| cmd->cmd = command; |
| list_add_tail(&out->offload_cmd_list, &cmd->node); |
| pthread_cond_signal(&out->offload_cond); |
| return 0; |
| } |
| |
| /* must be called iwth out->lock locked */ |
| static void stop_compressed_output_l(struct stream_out *out) |
| { |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| out->send_new_metadata = 1; |
| if (out->compr != NULL) { |
| compress_stop(out->compr); |
| while (out->offload_thread_blocked) { |
| pthread_cond_wait(&out->cond, &out->lock); |
| } |
| } |
| } |
| |
| static void *offload_thread_loop(void *context) |
| { |
| struct stream_out *out = (struct stream_out *) context; |
| struct listnode *item; |
| int ret = 0; |
| |
| setpriority(PRIO_PROCESS, 0, ANDROID_PRIORITY_AUDIO); |
| set_sched_policy(0, SP_FOREGROUND); |
| prctl(PR_SET_NAME, (unsigned long)"Offload Callback", 0, 0, 0); |
| |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&out->lock); |
| for (;;) { |
| struct offload_cmd *cmd = NULL; |
| stream_callback_event_t event; |
| bool send_callback = false; |
| |
| ALOGVV("%s offload_cmd_list %d out->offload_state %d", |
| __func__, list_empty(&out->offload_cmd_list), |
| out->offload_state); |
| if (list_empty(&out->offload_cmd_list)) { |
| ALOGV("%s SLEEPING", __func__); |
| pthread_cond_wait(&out->offload_cond, &out->lock); |
| ALOGV("%s RUNNING", __func__); |
| continue; |
| } |
| |
| item = list_head(&out->offload_cmd_list); |
| cmd = node_to_item(item, struct offload_cmd, node); |
| list_remove(item); |
| |
| ALOGVV("%s STATE %d CMD %d out->compr %p", |
| __func__, out->offload_state, cmd->cmd, out->compr); |
| |
| if (cmd->cmd == OFFLOAD_CMD_EXIT) { |
| free(cmd); |
| break; |
| } |
| |
| if (out->compr == NULL) { |
| ALOGE("%s: Compress handle is NULL", __func__); |
| pthread_cond_signal(&out->cond); |
| continue; |
| } |
| out->offload_thread_blocked = true; |
| pthread_mutex_unlock(&out->lock); |
| send_callback = false; |
| switch(cmd->cmd) { |
| case OFFLOAD_CMD_WAIT_FOR_BUFFER: |
| compress_wait(out->compr, -1); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_WRITE_READY; |
| break; |
| case OFFLOAD_CMD_PARTIAL_DRAIN: |
| ret = compress_next_track(out->compr); |
| if(ret == 0) |
| compress_partial_drain(out->compr); |
| else if(ret == -ETIMEDOUT) |
| compress_drain(out->compr); |
| else |
| ALOGE("%s: Next track returned error %d",__func__, ret); |
| |
| send_callback = true; |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| break; |
| case OFFLOAD_CMD_DRAIN: |
| compress_drain(out->compr); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| break; |
| default: |
| ALOGE("%s unknown command received: %d", __func__, cmd->cmd); |
| break; |
| } |
| pthread_mutex_lock(&out->lock); |
| out->offload_thread_blocked = false; |
| pthread_cond_signal(&out->cond); |
| if (send_callback) { |
| out->offload_callback(event, NULL, out->offload_cookie); |
| } |
| free(cmd); |
| } |
| |
| pthread_cond_signal(&out->cond); |
| while (!list_empty(&out->offload_cmd_list)) { |
| item = list_head(&out->offload_cmd_list); |
| list_remove(item); |
| free(node_to_item(item, struct offload_cmd, node)); |
| } |
| pthread_mutex_unlock(&out->lock); |
| |
| return NULL; |
| } |
| |
| static int create_offload_callback_thread(struct stream_out *out) |
| { |
| pthread_cond_init(&out->offload_cond, (const pthread_condattr_t *) NULL); |
| list_init(&out->offload_cmd_list); |
| pthread_create(&out->offload_thread, (const pthread_attr_t *) NULL, |
| offload_thread_loop, out); |
| return 0; |
| } |
| |
| static int destroy_offload_callback_thread(struct stream_out *out) |
| { |
| pthread_mutex_lock(&out->lock); |
| stop_compressed_output_l(out); |
| send_offload_cmd_l(out, OFFLOAD_CMD_EXIT); |
| |
| pthread_mutex_unlock(&out->lock); |
| pthread_join(out->offload_thread, (void **) NULL); |
| pthread_cond_destroy(&out->offload_cond); |
| |
| return 0; |
| } |
| |
| static bool allow_hdmi_channel_config(struct audio_device *adev) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool ret = true; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| /* |
| * If voice call is already existing, do not proceed further to avoid |
| * disabling/enabling both RX and TX devices, CSD calls, etc. |
| * Once the voice call done, the HDMI channels can be configured to |
| * max channels of remaining use cases. |
| */ |
| if (usecase->id == USECASE_VOICE_CALL) { |
| ALOGD("%s: voice call is active, no change in HDMI channels", |
| __func__); |
| ret = false; |
| break; |
| } else if (usecase->id == USECASE_AUDIO_PLAYBACK_MULTI_CH) { |
| ALOGD("%s: multi channel playback is active, " |
| "no change in HDMI channels", __func__); |
| ret = false; |
| break; |
| } |
| } |
| } |
| return ret; |
| } |
| |
| static int check_and_set_hdmi_channels(struct audio_device *adev, |
| unsigned int channels) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| |
| /* Check if change in HDMI channel config is allowed */ |
| if (!allow_hdmi_channel_config(adev)) |
| return 0; |
| |
| if (channels == adev->cur_hdmi_channels) { |
| ALOGD("%s: Requested channels are same as current channels(%d)", __func__, channels); |
| return 0; |
| } |
| |
| platform_set_hdmi_channels(adev->platform, channels); |
| adev->cur_hdmi_channels = channels; |
| |
| /* |
| * Deroute all the playback streams routed to HDMI so that |
| * the back end is deactivated. Note that backend will not |
| * be deactivated if any one stream is connected to it. |
| */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK && |
| usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| disable_audio_route(adev, usecase, true); |
| } |
| } |
| |
| /* |
| * Enable all the streams disabled above. Now the HDMI backend |
| * will be activated with new channel configuration |
| */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK && |
| usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| enable_audio_route(adev, usecase, true); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int stop_output_stream(struct stream_out *out) |
| { |
| int i, ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| out->usecase, use_case_table[out->usecase]); |
| uc_info = get_usecase_from_list(adev, out->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, out->usecase); |
| return -EINVAL; |
| } |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (adev->visualizer_stop_output != NULL) |
| adev->visualizer_stop_output(out->handle, out->pcm_device_id); |
| if (adev->offload_effects_stop_output != NULL) |
| adev->offload_effects_stop_output(out->handle, out->pcm_device_id); |
| } |
| |
| /* 1. Get and set stream specific mixer controls */ |
| disable_audio_route(adev, uc_info, true); |
| |
| /* 2. Disable the rx device */ |
| disable_snd_device(adev, uc_info->out_snd_device, true); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| /* Must be called after removing the usecase from list */ |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) |
| check_and_set_hdmi_channels(adev, DEFAULT_HDMI_OUT_CHANNELS); |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_output_stream(struct stream_out *out) |
| { |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s) devices(%#x)", |
| __func__, out->usecase, use_case_table[out->usecase], out->devices); |
| out->pcm_device_id = platform_get_pcm_device_id(out->usecase, PCM_PLAYBACK); |
| if (out->pcm_device_id < 0) { |
| ALOGE("%s: Invalid PCM device id(%d) for the usecase(%d)", |
| __func__, out->pcm_device_id, out->usecase); |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| uc_info->id = out->usecase; |
| uc_info->type = PCM_PLAYBACK; |
| uc_info->stream.out = out; |
| uc_info->devices = out->devices; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| |
| /* This must be called before adding this usecase to the list */ |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) |
| check_and_set_hdmi_channels(adev, out->compr_config.codec->ch_in); |
| else |
| check_and_set_hdmi_channels(adev, out->config.channels); |
| } |
| |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| |
| select_devices(adev, out->usecase); |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d)", |
| __func__, 0, out->pcm_device_id); |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| out->pcm = pcm_open(adev->snd_card, |
| out->pcm_device_id, |
| PCM_OUT | PCM_MONOTONIC, &out->config); |
| if (out->pcm && !pcm_is_ready(out->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(out->pcm)); |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| ret = -EIO; |
| goto error_open; |
| } |
| } else { |
| out->pcm = NULL; |
| out->compr = compress_open(adev->snd_card, |
| out->pcm_device_id, |
| COMPRESS_IN, &out->compr_config); |
| if (out->compr && !is_compress_ready(out->compr)) { |
| ALOGE("%s: %s", __func__, compress_get_error(out->compr)); |
| compress_close(out->compr); |
| out->compr = NULL; |
| ret = -EIO; |
| goto error_open; |
| } |
| if (out->offload_callback) |
| compress_nonblock(out->compr, out->non_blocking); |
| |
| #ifdef DS1_DOLBY_DDP_ENABLED |
| if (audio_extn_is_dolby_format(out->format)) |
| audio_extn_dolby_send_ddp_endp_params(adev); |
| #endif |
| |
| if (adev->visualizer_start_output != NULL) |
| adev->visualizer_start_output(out->handle, out->pcm_device_id); |
| if (adev->offload_effects_start_output != NULL) |
| adev->offload_effects_start_output(out->handle, out->pcm_device_id); |
| } |
| ALOGV("%s: exit", __func__); |
| return 0; |
| error_open: |
| stop_output_stream(out); |
| error_config: |
| return ret; |
| } |
| |
| static int check_input_parameters(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count) |
| { |
| int ret = 0; |
| |
| if ((format != AUDIO_FORMAT_PCM_16_BIT) && |
| !voice_extn_compress_voip_is_format_supported(format) && |
| !audio_extn_compr_cap_format_supported(format)) ret = -EINVAL; |
| |
| switch (channel_count) { |
| case 1: |
| case 2: |
| case 6: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| switch (sample_rate) { |
| case 8000: |
| case 11025: |
| case 12000: |
| case 16000: |
| case 22050: |
| case 24000: |
| case 32000: |
| case 44100: |
| case 48000: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static size_t get_input_buffer_size(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count) |
| { |
| size_t size = 0; |
| |
| if (check_input_parameters(sample_rate, format, channel_count) != 0) |
| return 0; |
| |
| size = (sample_rate * AUDIO_CAPTURE_PERIOD_DURATION_MSEC) / 1000; |
| /* ToDo: should use frame_size computed based on the format and |
| channel_count here. */ |
| size *= sizeof(short) * channel_count; |
| |
| /* make sure the size is multiple of 64 */ |
| size += 0x3f; |
| size &= ~0x3f; |
| |
| return size; |
| } |
| |
| static uint32_t out_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->sample_rate; |
| } |
| |
| static int out_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t out_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) |
| return out->compr_config.fragment_size; |
| else if(out->usecase == USECASE_COMPRESS_VOIP_CALL) |
| return voice_extn_compress_voip_out_get_buffer_size(out); |
| |
| return out->config.period_size * audio_stream_frame_size(stream); |
| } |
| |
| static uint32_t out_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->channel_mask; |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->format; |
| } |
| |
| static int out_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| return -ENOSYS; |
| } |
| |
| static int out_standby(struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| out->usecase, use_case_table[out->usecase]); |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| /* Ignore standby in case of voip call because the voip output |
| * stream is closed in adev_close_output_stream() |
| */ |
| ALOGV("%s: Ignore Standby in VOIP call", __func__); |
| return 0; |
| } |
| |
| pthread_mutex_lock(&out->lock); |
| if (!out->standby) { |
| pthread_mutex_lock(&adev->lock); |
| out->standby = true; |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (out->pcm) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| } else { |
| stop_compressed_output_l(out); |
| out->gapless_mdata.encoder_delay = 0; |
| out->gapless_mdata.encoder_padding = 0; |
| if (out->compr != NULL) { |
| compress_close(out->compr); |
| out->compr = NULL; |
| } |
| } |
| stop_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&out->lock); |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| static int out_dump(const struct audio_stream *stream, int fd) |
| { |
| return 0; |
| } |
| |
| static int parse_compress_metadata(struct stream_out *out, struct str_parms *parms) |
| { |
| int ret = 0; |
| char value[32]; |
| bool is_meta_data_params = false; |
| struct compr_gapless_mdata tmp_mdata; |
| tmp_mdata.encoder_delay = 0; |
| tmp_mdata.encoder_padding = 0; |
| if (!out || !parms) { |
| ALOGE("%s: return invalid ",__func__); |
| return -EINVAL; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_SAMPLE_RATE, value, sizeof(value)); |
| if(ret >= 0) |
| is_meta_data_params = true; |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_NUM_CHANNEL, value, sizeof(value)); |
| if(ret >= 0 ) |
| is_meta_data_params = true; |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_AVG_BIT_RATE, value, sizeof(value)); |
| if(ret >= 0 ) |
| is_meta_data_params = true; |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_DELAY_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| is_meta_data_params = true; |
| tmp_mdata.encoder_delay = atoi(value); //whats a good limit check? |
| } |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_PADDING_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| is_meta_data_params = true; |
| tmp_mdata.encoder_padding = atoi(value); |
| } |
| |
| if(!is_meta_data_params) { |
| ALOGV("%s: Not gapless meta data params", __func__); |
| return 0; |
| } |
| out->gapless_mdata = tmp_mdata; |
| out->send_new_metadata = 1; |
| ALOGV("%s new encoder delay %u and padding %u", __func__, |
| out->gapless_mdata.encoder_delay, out->gapless_mdata.encoder_padding); |
| |
| return 0; |
| } |
| |
| |
| static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| struct str_parms *parms; |
| char value[32]; |
| int ret = 0, val = 0, err; |
| bool select_new_device = false; |
| |
| ALOGD("%s: enter: usecase(%d: %s) kvpairs: %s", |
| __func__, out->usecase, use_case_table[out->usecase], kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| pthread_mutex_lock(&out->lock); |
| pthread_mutex_lock(&adev->lock); |
| |
| /* |
| * When HDMI cable is unplugged the music playback is paused and |
| * the policy manager sends routing=0. But the audioflinger |
| * continues to write data until standby time (3sec). |
| * As the HDMI core is turned off, the write gets blocked. |
| * Avoid this by routing audio to speaker until standby. |
| */ |
| if (out->devices == AUDIO_DEVICE_OUT_AUX_DIGITAL && |
| val == AUDIO_DEVICE_NONE) { |
| val = AUDIO_DEVICE_OUT_SPEAKER; |
| } |
| |
| /* |
| * select_devices() call below switches all the usecases on the same |
| * backend to the new device. Refer to check_usecases_codec_backend() in |
| * the select_devices(). But how do we undo this? |
| * |
| * For example, music playback is active on headset (deep-buffer usecase) |
| * and if we go to ringtones and select a ringtone, low-latency usecase |
| * will be started on headset+speaker. As we can't enable headset+speaker |
| * and headset devices at the same time, select_devices() switches the music |
| * playback to headset+speaker while starting low-lateny usecase for ringtone. |
| * So when the ringtone playback is completed, how do we undo the same? |
| * |
| * We are relying on the out_set_parameters() call on deep-buffer output, |
| * once the ringtone playback is ended. |
| * NOTE: We should not check if the current devices are same as new devices. |
| * Because select_devices() must be called to switch back the music |
| * playback to headset. |
| */ |
| if (val != 0) { |
| out->devices = val; |
| |
| if (!out->standby) |
| select_devices(adev, out->usecase); |
| |
| if ((adev->mode == AUDIO_MODE_IN_CALL) && |
| !voice_is_in_call(adev) && |
| (out == adev->primary_output)) { |
| ret = voice_start_call(adev); |
| } else if ((adev->mode == AUDIO_MODE_IN_CALL) && |
| voice_is_in_call(adev) && |
| (out == adev->primary_output)) { |
| update_devices_for_all_voice_usecases(adev); |
| } |
| } |
| |
| if ((adev->mode == AUDIO_MODE_NORMAL) && |
| voice_is_in_call(adev) && |
| (out == adev->primary_output)) { |
| ret = voice_stop_call(adev); |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| if (out == adev->primary_output) { |
| pthread_mutex_lock(&adev->lock); |
| audio_extn_set_parameters(adev, parms); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| pthread_mutex_lock(&out->lock); |
| parse_compress_metadata(out, parms); |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| str_parms_destroy(parms); |
| ALOGV("%s: exit: code(%d)", __func__, ret); |
| return ret; |
| } |
| |
| static char* out_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| char value[256]; |
| struct str_parms *reply = str_parms_create(); |
| size_t i, j; |
| int ret; |
| bool first = true; |
| ALOGV("%s: enter: keys - %s", __func__, keys); |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| while (out->supported_channel_masks[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_channels_name_to_enum_table); j++) { |
| if (out_channels_name_to_enum_table[j].value == out->supported_channel_masks[i]) { |
| if (!first) { |
| strcat(value, "|"); |
| } |
| strcat(value, out_channels_name_to_enum_table[j].name); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value); |
| str = str_parms_to_str(reply); |
| } else { |
| voice_extn_out_get_parameters(out, query, reply); |
| str = str_parms_to_str(reply); |
| if (!strncmp(str, "", sizeof(""))) { |
| str = strdup(keys); |
| } |
| } |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static uint32_t out_get_latency(const struct audio_stream_out *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) |
| return COMPRESS_OFFLOAD_PLAYBACK_LATENCY; |
| |
| return (out->config.period_count * out->config.period_size * 1000) / |
| (out->config.rate); |
| } |
| |
| static int out_set_volume(struct audio_stream_out *stream, float left, |
| float right) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int volume[2]; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MULTI_CH) { |
| /* only take left channel into account: the API is for stereo anyway */ |
| out->muted = (left == 0.0f); |
| return 0; |
| } else if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| char mixer_ctl_name[128]; |
| struct audio_device *adev = out->dev; |
| struct mixer_ctl *ctl; |
| int pcm_device_id = platform_get_pcm_device_id(out->usecase, |
| PCM_PLAYBACK); |
| |
| snprintf(mixer_ctl_name, sizeof(mixer_ctl_name), |
| "Compress Playback %d Volume", pcm_device_id); |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, mixer_ctl_name); |
| return -EINVAL; |
| } |
| volume[0] = (int)(left * COMPRESS_PLAYBACK_VOLUME_MAX); |
| volume[1] = (int)(right * COMPRESS_PLAYBACK_VOLUME_MAX); |
| mixer_ctl_set_array(ctl, volume, sizeof(volume)/sizeof(volume[0])); |
| return 0; |
| } |
| |
| return -ENOSYS; |
| } |
| |
| static ssize_t out_write(struct audio_stream_out *stream, const void *buffer, |
| size_t bytes) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| ssize_t ret = 0; |
| |
| pthread_mutex_lock(&out->lock); |
| if (out->standby) { |
| out->standby = false; |
| pthread_mutex_lock(&adev->lock); |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) |
| ret = voice_extn_compress_voip_start_output_stream(out); |
| else |
| ret = start_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| /* ToDo: If use case is compress offload should return 0 */ |
| if (ret != 0) { |
| out->standby = true; |
| goto exit; |
| } |
| } |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| ALOGVV("%s: writing buffer (%d bytes) to compress device", __func__, bytes); |
| if (out->send_new_metadata) { |
| ALOGVV("send new gapless metadata"); |
| compress_set_gapless_metadata(out->compr, &out->gapless_mdata); |
| out->send_new_metadata = 0; |
| } |
| |
| ret = compress_write(out->compr, buffer, bytes); |
| ALOGVV("%s: writing buffer (%d bytes) to compress device returned %d", __func__, bytes, ret); |
| if (ret >= 0 && ret < (ssize_t)bytes) { |
| send_offload_cmd_l(out, OFFLOAD_CMD_WAIT_FOR_BUFFER); |
| } |
| if (!out->playback_started) { |
| compress_start(out->compr); |
| out->playback_started = 1; |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| } |
| pthread_mutex_unlock(&out->lock); |
| return ret; |
| } else { |
| if (out->pcm) { |
| if (out->muted) |
| memset((void *)buffer, 0, bytes); |
| ALOGVV("%s: writing buffer (%d bytes) to pcm device", __func__, bytes); |
| ret = pcm_write(out->pcm, (void *)buffer, bytes); |
| if (ret == 0) |
| out->written += bytes / (out->config.channels * sizeof(short)); |
| } |
| } |
| |
| exit: |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| if (out->pcm) |
| ALOGE("%s: error %d - %s", __func__, ret, pcm_get_error(out->pcm)); |
| out_standby(&out->stream.common); |
| usleep(bytes * 1000000 / audio_stream_frame_size(&out->stream.common) / |
| out_get_sample_rate(&out->stream.common)); |
| } |
| return bytes; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out *stream, |
| uint32_t *dsp_frames) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| *dsp_frames = 0; |
| if ((out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) && (dsp_frames != NULL)) { |
| pthread_mutex_lock(&out->lock); |
| if (out->compr != NULL) { |
| compress_get_tstamp(out->compr, (unsigned long *)dsp_frames, |
| &out->sample_rate); |
| ALOGVV("%s rendered frames %d sample_rate %d", |
| __func__, *dsp_frames, out->sample_rate); |
| } |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } else |
| return -EINVAL; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int out_get_next_write_timestamp(const struct audio_stream_out *stream, |
| int64_t *timestamp) |
| { |
| return -EINVAL; |
| } |
| |
| static int out_get_presentation_position(const struct audio_stream_out *stream, |
| uint64_t *frames, struct timespec *timestamp) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int ret = -1; |
| unsigned long dsp_frames; |
| |
| pthread_mutex_lock(&out->lock); |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (out->compr != NULL) { |
| compress_get_tstamp(out->compr, &dsp_frames, |
| &out->sample_rate); |
| ALOGVV("%s rendered frames %ld sample_rate %d", |
| __func__, dsp_frames, out->sample_rate); |
| *frames = dsp_frames; |
| ret = 0; |
| /* this is the best we can do */ |
| clock_gettime(CLOCK_MONOTONIC, timestamp); |
| } |
| } else { |
| if (out->pcm) { |
| size_t avail; |
| if (pcm_get_htimestamp(out->pcm, &avail, timestamp) == 0) { |
| size_t kernel_buffer_size = out->config.period_size * out->config.period_count; |
| int64_t signed_frames = out->written - kernel_buffer_size + avail; |
| // This adjustment accounts for buffering after app processor. |
| // It is based on estimated DSP latency per use case, rather than exact. |
| signed_frames -= |
| (platform_render_latency(out->usecase) * out->sample_rate / 1000000LL); |
| |
| // It would be unusual for this value to be negative, but check just in case ... |
| if (signed_frames >= 0) { |
| *frames = signed_frames; |
| ret = 0; |
| } |
| } |
| } |
| } |
| |
| pthread_mutex_unlock(&out->lock); |
| |
| return ret; |
| } |
| |
| static int out_set_callback(struct audio_stream_out *stream, |
| stream_callback_t callback, void *cookie) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&out->lock); |
| out->offload_callback = callback; |
| out->offload_cookie = cookie; |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } |
| |
| static int out_pause(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| pthread_mutex_lock(&out->lock); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PLAYING) { |
| status = compress_pause(out->compr); |
| out->offload_state = OFFLOAD_STATE_PAUSED; |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_resume(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| status = 0; |
| pthread_mutex_lock(&out->lock); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PAUSED) { |
| status = compress_resume(out->compr); |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_drain(struct audio_stream_out* stream, audio_drain_type_t type ) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| pthread_mutex_lock(&out->lock); |
| if (type == AUDIO_DRAIN_EARLY_NOTIFY) |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_PARTIAL_DRAIN); |
| else |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_DRAIN); |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_flush(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| pthread_mutex_lock(&out->lock); |
| stop_compressed_output_l(out); |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } |
| return -ENOSYS; |
| } |
| |
| /** audio_stream_in implementation **/ |
| static uint32_t in_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->config.rate; |
| } |
| |
| static int in_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t in_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| if(in->usecase == USECASE_COMPRESS_VOIP_CALL) |
| return voice_extn_compress_voip_in_get_buffer_size(in); |
| else if(audio_extn_compr_cap_usecase_supported(in->usecase)) |
| return audio_extn_compr_cap_get_buffer_size(in->config.format); |
| |
| return in->config.period_size * audio_stream_frame_size(stream); |
| } |
| |
| static uint32_t in_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->channel_mask; |
| } |
| |
| static audio_format_t in_get_format(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->format; |
| } |
| |
| static int in_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| return -ENOSYS; |
| } |
| |
| static int in_standby(struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int status = 0; |
| ALOGV("%s: enter", __func__); |
| |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| /* Ignore standby in case of voip call because the voip input |
| * stream is closed in adev_close_input_stream() |
| */ |
| ALOGV("%s: Ignore Standby in VOIP call", __func__); |
| return status; |
| } |
| |
| pthread_mutex_lock(&in->lock); |
| if (!in->standby) { |
| pthread_mutex_lock(&adev->lock); |
| in->standby = true; |
| if (in->pcm) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| status = stop_input_stream(in); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&in->lock); |
| ALOGV("%s: exit: status(%d)", __func__, status); |
| return status; |
| } |
| |
| static int in_dump(const struct audio_stream *stream, int fd) |
| { |
| return 0; |
| } |
| |
| static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int ret = 0, val = 0, err; |
| |
| ALOGV("%s: enter: kvpairs=%s", __func__, kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| |
| pthread_mutex_lock(&in->lock); |
| pthread_mutex_lock(&adev->lock); |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_INPUT_SOURCE, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| /* no audio source uses val == 0 */ |
| if ((in->source != val) && (val != 0)) { |
| in->source = val; |
| } |
| } |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| if ((in->device != val) && (val != 0)) { |
| in->device = val; |
| /* If recording is in progress, change the tx device to new device */ |
| if (!in->standby) |
| ret = select_devices(adev, in->usecase); |
| } |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| str_parms_destroy(parms); |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| static char* in_get_parameters(const struct audio_stream *stream, |
| const char *keys) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| char value[256]; |
| struct str_parms *reply = str_parms_create(); |
| ALOGV("%s: enter: keys - %s", __func__, keys); |
| |
| voice_extn_in_get_parameters(in, query, reply); |
| |
| str = str_parms_to_str(reply); |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static int in_set_gain(struct audio_stream_in *stream, float gain) |
| { |
| return 0; |
| } |
| |
| static ssize_t in_read(struct audio_stream_in *stream, void *buffer, |
| size_t bytes) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int i, ret = -1; |
| |
| pthread_mutex_lock(&in->lock); |
| if (in->standby) { |
| pthread_mutex_lock(&adev->lock); |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) |
| ret = voice_extn_compress_voip_start_input_stream(in); |
| else |
| ret = start_input_stream(in); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) { |
| goto exit; |
| } |
| in->standby = 0; |
| } |
| |
| if (in->pcm) { |
| if (audio_extn_ssr_get_enabled() && popcount(in->channel_mask) == 6) |
| ret = audio_extn_ssr_read(stream, buffer, bytes); |
| else if (audio_extn_compr_cap_usecase_supported(in->usecase)) |
| ret = audio_extn_compr_cap_read(in, buffer, bytes); |
| else |
| ret = pcm_read(in->pcm, buffer, bytes); |
| } |
| |
| /* |
| * Instead of writing zeroes here, we could trust the hardware |
| * to always provide zeroes when muted. |
| */ |
| if (ret == 0 && voice_get_mic_mute(adev) && !voice_is_in_call(adev)) |
| memset(buffer, 0, bytes); |
| |
| exit: |
| pthread_mutex_unlock(&in->lock); |
| |
| if (ret != 0) { |
| in_standby(&in->stream.common); |
| ALOGV("%s: read failed - sleeping for buffer duration", __func__); |
| usleep(bytes * 1000000 / audio_stream_frame_size(&in->stream.common) / |
| in_get_sample_rate(&in->stream.common)); |
| } |
| return bytes; |
| } |
| |
| static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream) |
| { |
| return 0; |
| } |
| |
| static int add_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect, |
| bool enable) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| int status = 0; |
| effect_descriptor_t desc; |
| |
| status = (*effect)->get_descriptor(effect, &desc); |
| if (status != 0) |
| return status; |
| |
| pthread_mutex_lock(&in->lock); |
| pthread_mutex_lock(&in->dev->lock); |
| if ((in->source == AUDIO_SOURCE_VOICE_COMMUNICATION) && |
| in->enable_aec != enable && |
| (memcmp(&desc.type, FX_IID_AEC, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_aec = enable; |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| if (in->enable_ns != enable && |
| (memcmp(&desc.type, FX_IID_NS, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_ns = enable; |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| pthread_mutex_unlock(&in->dev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| return 0; |
| } |
| |
| static int in_add_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, true); |
| } |
| |
| static int in_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, false); |
| } |
| |
| static int adev_open_output_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| audio_output_flags_t flags, |
| struct audio_config *config, |
| struct audio_stream_out **stream_out) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_out *out; |
| int i, ret = 0; |
| |
| ALOGV("%s: enter: sample_rate(%d) channel_mask(%#x) devices(%#x) flags(%#x)", |
| __func__, config->sample_rate, config->channel_mask, devices, flags); |
| *stream_out = NULL; |
| out = (struct stream_out *)calloc(1, sizeof(struct stream_out)); |
| |
| if (!out) { |
| return -ENOMEM; |
| } |
| |
| pthread_mutex_init(&out->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_cond_init(&out->cond, (const pthread_condattr_t *) NULL); |
| |
| if (devices == AUDIO_DEVICE_NONE) |
| devices = AUDIO_DEVICE_OUT_SPEAKER; |
| |
| out->flags = flags; |
| out->devices = devices; |
| out->dev = adev; |
| out->format = config->format; |
| out->sample_rate = config->sample_rate; |
| out->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_STEREO; |
| out->handle = handle; |
| |
| /* Init use case and pcm_config */ |
| if ((out->flags == AUDIO_OUTPUT_FLAG_DIRECT) && |
| (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL || |
| out->devices & AUDIO_DEVICE_OUT_PROXY)) { |
| |
| pthread_mutex_lock(&adev->lock); |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) |
| ret = read_hdmi_channel_masks(out); |
| |
| if (out->devices & AUDIO_DEVICE_OUT_PROXY) |
| ret = audio_extn_read_afe_proxy_channel_masks(out); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) |
| goto error_open; |
| |
| if (config->sample_rate == 0) |
| config->sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| if (config->channel_mask == 0) |
| config->channel_mask = AUDIO_CHANNEL_OUT_5POINT1; |
| |
| out->channel_mask = config->channel_mask; |
| out->sample_rate = config->sample_rate; |
| out->usecase = USECASE_AUDIO_PLAYBACK_MULTI_CH; |
| out->config = pcm_config_hdmi_multi; |
| out->config.rate = config->sample_rate; |
| out->config.channels = popcount(out->channel_mask); |
| out->config.period_size = HDMI_MULTI_PERIOD_BYTES / (out->config.channels * 2); |
| } else if ((out->dev->mode == AUDIO_MODE_IN_COMMUNICATION) && |
| (out->flags == (AUDIO_OUTPUT_FLAG_DIRECT | AUDIO_OUTPUT_FLAG_VOIP_RX)) && |
| (voice_extn_compress_voip_is_config_supported(config))) { |
| ret = voice_extn_compress_voip_open_output_stream(out); |
| if (ret != 0) { |
| ALOGE("%s: Compress voip output cannot be opened, error:%d", |
| __func__, ret); |
| goto error_open; |
| } |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) { |
| if (config->offload_info.version != AUDIO_INFO_INITIALIZER.version || |
| config->offload_info.size != AUDIO_INFO_INITIALIZER.size) { |
| ALOGE("%s: Unsupported Offload information", __func__); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| if (!is_supported_format(config->offload_info.format) && |
| !audio_extn_is_dolby_format(config->offload_info.format)) { |
| ALOGE("%s: Unsupported audio format", __func__); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| out->compr_config.codec = (struct snd_codec *) |
| calloc(1, sizeof(struct snd_codec)); |
| |
| out->usecase = USECASE_AUDIO_PLAYBACK_OFFLOAD; |
| if (config->offload_info.channel_mask) |
| out->channel_mask = config->offload_info.channel_mask; |
| else if (config->channel_mask) |
| out->channel_mask = config->channel_mask; |
| out->format = config->offload_info.format; |
| out->sample_rate = config->offload_info.sample_rate; |
| |
| out->stream.set_callback = out_set_callback; |
| out->stream.pause = out_pause; |
| out->stream.resume = out_resume; |
| out->stream.drain = out_drain; |
| out->stream.flush = out_flush; |
| |
| if (audio_extn_is_dolby_format(config->offload_info.format)) |
| out->compr_config.codec->id = |
| audio_extn_dolby_get_snd_codec_id(adev, out, |
| config->offload_info.format); |
| else |
| out->compr_config.codec->id = |
| get_snd_codec_id(config->offload_info.format); |
| out->compr_config.fragment_size = get_offload_buffer_size(); |
| out->compr_config.fragments = COMPRESS_OFFLOAD_NUM_FRAGMENTS; |
| out->compr_config.codec->sample_rate = |
| compress_get_alsa_rate(config->offload_info.sample_rate); |
| out->compr_config.codec->bit_rate = |
| config->offload_info.bit_rate; |
| out->compr_config.codec->ch_in = |
| popcount(config->channel_mask); |
| out->compr_config.codec->ch_out = out->compr_config.codec->ch_in; |
| |
| if (flags & AUDIO_OUTPUT_FLAG_NON_BLOCKING) |
| out->non_blocking = 1; |
| |
| out->send_new_metadata = 1; |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| |
| create_offload_callback_thread(out); |
| ALOGV("%s: offloaded output offload_info version %04x bit rate %d", |
| __func__, config->offload_info.version, |
| config->offload_info.bit_rate); |
| //Decide if we need to use gapless mode by default |
| check_and_set_gapless_mode(adev); |
| |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_INCALL_MUSIC) { |
| ret = voice_check_and_set_incall_music_usecase(adev, out); |
| if (ret != 0) { |
| ALOGE("%s: Incall music delivery usecase cannot be set error:%d", |
| __func__, ret); |
| goto error_open; |
| } |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_FAST) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_LOW_LATENCY; |
| out->config = pcm_config_low_latency; |
| out->sample_rate = out->config.rate; |
| } else { |
| /* primary path is the default path selected if no other outputs are available/suitable */ |
| out->usecase = USECASE_AUDIO_PLAYBACK_PRIMARY; |
| out->config = pcm_config_deep_buffer; |
| out->sample_rate = out->config.rate; |
| } |
| |
| if ((out->usecase == USECASE_AUDIO_PLAYBACK_PRIMARY) || |
| (flags & AUDIO_OUTPUT_FLAG_PRIMARY)) { |
| /* Ensure the default output is not selected twice */ |
| if(adev->primary_output == NULL) |
| adev->primary_output = out; |
| else { |
| ALOGE("%s: Primary output is already opened", __func__); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| } |
| |
| /* Check if this usecase is already existing */ |
| pthread_mutex_lock(&adev->lock); |
| if (get_usecase_from_list(adev, out->usecase) != NULL) { |
| ALOGE("%s: Usecase (%d) is already present", __func__, out->usecase); |
| pthread_mutex_unlock(&adev->lock); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.common.set_sample_rate = out_set_sample_rate; |
| out->stream.common.get_buffer_size = out_get_buffer_size; |
| out->stream.common.get_channels = out_get_channels; |
| out->stream.common.get_format = out_get_format; |
| out->stream.common.set_format = out_set_format; |
| out->stream.common.standby = out_standby; |
| out->stream.common.dump = out_dump; |
| out->stream.common.set_parameters = out_set_parameters; |
| out->stream.common.get_parameters = out_get_parameters; |
| out->stream.common.add_audio_effect = out_add_audio_effect; |
| out->stream.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream.get_latency = out_get_latency; |
| out->stream.set_volume = out_set_volume; |
| out->stream.write = out_write; |
| out->stream.get_render_position = out_get_render_position; |
| out->stream.get_next_write_timestamp = out_get_next_write_timestamp; |
| out->stream.get_presentation_position = out_get_presentation_position; |
| |
| out->standby = 1; |
| /* out->muted = false; by calloc() */ |
| /* out->written = 0; by calloc() */ |
| |
| config->format = out->stream.common.get_format(&out->stream.common); |
| config->channel_mask = out->stream.common.get_channels(&out->stream.common); |
| config->sample_rate = out->stream.common.get_sample_rate(&out->stream.common); |
| |
| *stream_out = &out->stream; |
| ALOGV("%s: exit", __func__); |
| return 0; |
| |
| error_open: |
| free(out); |
| *stream_out = NULL; |
| ALOGD("%s: exit: ret %d", __func__, ret); |
| return ret; |
| } |
| |
| static void adev_close_output_stream(struct audio_hw_device *dev, |
| struct audio_stream_out *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int ret = 0; |
| |
| ALOGV("%s: enter", __func__); |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| ret = voice_extn_compress_voip_close_output_stream(&stream->common); |
| if(ret != 0) |
| ALOGE("%s: Compress voip output cannot be closed, error:%d", |
| __func__, ret); |
| } |
| else |
| out_standby(&stream->common); |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| destroy_offload_callback_thread(out); |
| |
| if (out->compr_config.codec != NULL) |
| free(out->compr_config.codec); |
| } |
| pthread_cond_destroy(&out->cond); |
| pthread_mutex_destroy(&out->lock); |
| free(stream); |
| ALOGV("%s: exit", __func__); |
| } |
| |
| static int adev_set_parameters(struct audio_hw_device *dev, const char *kvpairs) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int val; |
| int ret = 0, err; |
| |
| ALOGD("%s: enter: %s", __func__, kvpairs); |
| |
| pthread_mutex_lock(&adev->lock); |
| parms = str_parms_create_str(kvpairs); |
| |
| ret = voice_set_parameters(adev, parms); |
| if (ret != 0) |
| goto done; |
| |
| ret = platform_set_parameters(adev->platform, parms); |
| if (ret != 0) |
| goto done; |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_NREC, value, sizeof(value)); |
| if (err >= 0) { |
| /* When set to false, HAL should disable EC and NS |
| * But it is currently not supported. |
| */ |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->bluetooth_nrec = true; |
| else |
| adev->bluetooth_nrec = false; |
| } |
| |
| err = str_parms_get_str(parms, "screen_state", value, sizeof(value)); |
| if (err >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->screen_off = false; |
| else |
| adev->screen_off = true; |
| } |
| |
| err = str_parms_get_int(parms, "rotation", &val); |
| if (err >= 0) { |
| bool reverse_speakers = false; |
| switch(val) { |
| // FIXME: note that the code below assumes that the speakers are in the correct placement |
| // relative to the user when the device is rotated 90deg from its default rotation. This |
| // assumption is device-specific, not platform-specific like this code. |
| case 270: |
| reverse_speakers = true; |
| break; |
| case 0: |
| case 90: |
| case 180: |
| break; |
| default: |
| ALOGE("%s: unexpected rotation of %d", __func__, val); |
| } |
| if (adev->speaker_lr_swap != reverse_speakers) { |
| adev->speaker_lr_swap = reverse_speakers; |
| // only update the selected device if there is active pcm playback |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK) { |
| select_devices(adev, usecase->id); |
| break; |
| } |
| } |
| } |
| } |
| |
| audio_extn_set_parameters(adev, parms); |
| |
| done: |
| str_parms_destroy(parms); |
| pthread_mutex_unlock(&adev->lock); |
| ALOGV("%s: exit with code(%d)", __func__, ret); |
| return ret; |
| } |
| |
| static char* adev_get_parameters(const struct audio_hw_device *dev, |
| const char *keys) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *reply = str_parms_create(); |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| |
| pthread_mutex_lock(&adev->lock); |
| |
| audio_extn_get_parameters(adev, query, reply); |
| voice_get_parameters(adev, query, reply); |
| platform_get_parameters(adev->platform, query, reply); |
| str = str_parms_to_str(reply); |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| |
| pthread_mutex_unlock(&adev->lock); |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static int adev_init_check(const struct audio_hw_device *dev) |
| { |
| return 0; |
| } |
| |
| static int adev_set_voice_volume(struct audio_hw_device *dev, float volume) |
| { |
| int ret; |
| struct audio_device *adev = (struct audio_device *)dev; |
| pthread_mutex_lock(&adev->lock); |
| /* cache volume */ |
| ret = voice_set_volume(adev, volume); |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int adev_set_master_volume(struct audio_hw_device *dev, float volume) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_volume(struct audio_hw_device *dev, |
| float *volume) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_master_mute(struct audio_hw_device *dev, bool muted) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_mute(struct audio_hw_device *dev, bool *muted) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_mode(struct audio_hw_device *dev, audio_mode_t mode) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| pthread_mutex_lock(&adev->lock); |
| if (adev->mode != mode) { |
| ALOGD("%s mode %d\n", __func__, mode); |
| adev->mode = mode; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return 0; |
| } |
| |
| static int adev_set_mic_mute(struct audio_hw_device *dev, bool state) |
| { |
| int ret; |
| |
| pthread_mutex_lock(&adev->lock); |
| ALOGD("%s state %d\n", __func__, state); |
| ret = voice_set_mic_mute((struct audio_device *)dev, state); |
| pthread_mutex_unlock(&adev->lock); |
| |
| return ret; |
| } |
| |
| static int adev_get_mic_mute(const struct audio_hw_device *dev, bool *state) |
| { |
| *state = voice_get_mic_mute((struct audio_device *)dev); |
| return 0; |
| } |
| |
| static size_t adev_get_input_buffer_size(const struct audio_hw_device *dev, |
| const struct audio_config *config) |
| { |
| int channel_count = popcount(config->channel_mask); |
| |
| return get_input_buffer_size(config->sample_rate, config->format, channel_count); |
| } |
| |
| static int adev_open_input_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| struct audio_config *config, |
| struct audio_stream_in **stream_in) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_in *in; |
| int ret = 0, buffer_size, frame_size; |
| int channel_count = popcount(config->channel_mask); |
| |
| ALOGV("%s: enter", __func__); |
| *stream_in = NULL; |
| if (check_input_parameters(config->sample_rate, config->format, channel_count) != 0) |
| return -EINVAL; |
| |
| in = (struct stream_in *)calloc(1, sizeof(struct stream_in)); |
| |
| in->stream.common.get_sample_rate = in_get_sample_rate; |
| in->stream.common.set_sample_rate = in_set_sample_rate; |
| in->stream.common.get_buffer_size = in_get_buffer_size; |
| in->stream.common.get_channels = in_get_channels; |
| in->stream.common.get_format = in_get_format; |
| in->stream.common.set_format = in_set_format; |
| in->stream.common.standby = in_standby; |
| in->stream.common.dump = in_dump; |
| in->stream.common.set_parameters = in_set_parameters; |
| in->stream.common.get_parameters = in_get_parameters; |
| in->stream.common.add_audio_effect = in_add_audio_effect; |
| in->stream.common.remove_audio_effect = in_remove_audio_effect; |
| in->stream.set_gain = in_set_gain; |
| in->stream.read = in_read; |
| in->stream.get_input_frames_lost = in_get_input_frames_lost; |
| |
| in->device = devices; |
| in->source = AUDIO_SOURCE_DEFAULT; |
| in->dev = adev; |
| in->standby = 1; |
| in->channel_mask = config->channel_mask; |
| |
| /* Update config params with the requested sample rate and channels */ |
| in->usecase = USECASE_AUDIO_RECORD; |
| in->config = pcm_config_audio_capture; |
| in->config.rate = config->sample_rate; |
| in->format = config->format; |
| |
| if ((in->dev->mode == AUDIO_MODE_IN_COMMUNICATION) && |
| (voice_extn_compress_voip_is_config_supported(config))) { |
| ret = voice_extn_compress_voip_open_input_stream(in); |
| if (ret != 0) |
| { |
| ALOGE("%s: Compress voip input cannot be opened, error:%d", |
| __func__, ret); |
| goto err_open; |
| } |
| } else if (channel_count == 6) { |
| if(audio_extn_ssr_get_enabled()) { |
| if(audio_extn_ssr_init(adev, in)) { |
| ALOGE("%s: audio_extn_ssr_init failed", __func__); |
| ret = -EINVAL; |
| goto err_open; |
| } |
| } else { |
| ret = -EINVAL; |
| goto err_open; |
| } |
| } else if (audio_extn_compr_cap_enabled() && |
| audio_extn_compr_cap_format_supported(config->format)) { |
| audio_extn_compr_cap_init(adev, in); |
| } else { |
| in->config.channels = channel_count; |
| frame_size = audio_stream_frame_size((struct audio_stream *)in); |
| buffer_size = get_input_buffer_size(config->sample_rate, |
| config->format, |
| channel_count); |
| in->config.period_size = buffer_size / frame_size; |
| } |
| |
| *stream_in = &in->stream; |
| ALOGV("%s: exit", __func__); |
| return ret; |
| |
| err_open: |
| free(in); |
| *stream_in = NULL; |
| return ret; |
| } |
| |
| static void adev_close_input_stream(struct audio_hw_device *dev, |
| struct audio_stream_in *stream) |
| { |
| int ret; |
| struct stream_in *in = (struct stream_in *)stream; |
| ALOGV("%s", __func__); |
| |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| ret = voice_extn_compress_voip_close_input_stream(&stream->common); |
| if (ret != 0) |
| ALOGE("%s: Compress voip input cannot be closed, error:%d", |
| __func__, ret); |
| } else |
| in_standby(&stream->common); |
| |
| if (audio_extn_ssr_get_enabled() && (popcount(in->channel_mask) == 6)) { |
| audio_extn_ssr_deinit(); |
| } |
| free(stream); |
| |
| if(audio_extn_compr_cap_enabled() && |
| audio_extn_compr_cap_format_supported(in->config.format)) |
| audio_extn_compr_cap_deinit(); |
| return; |
| } |
| |
| static int adev_dump(const audio_hw_device_t *device, int fd) |
| { |
| return 0; |
| } |
| |
| static int adev_close(hw_device_t *device) |
| { |
| struct audio_device *adev = (struct audio_device *)device; |
| |
| if (!adev) |
| return 0; |
| |
| pthread_mutex_lock(&adev_init_lock); |
| |
| if ((--audio_device_ref_count) == 0) { |
| audio_extn_listen_deinit(adev); |
| audio_route_free(adev->audio_route); |
| free(adev->snd_dev_ref_cnt); |
| platform_deinit(adev->platform); |
| free(device); |
| adev = NULL; |
| } |
| pthread_mutex_unlock(&adev_init_lock); |
| return 0; |
| } |
| |
| static int adev_open(const hw_module_t *module, const char *name, |
| hw_device_t **device) |
| { |
| int i, ret; |
| |
| ALOGD("%s: enter", __func__); |
| if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0) return -EINVAL; |
| |
| pthread_mutex_lock(&adev_init_lock); |
| if (audio_device_ref_count != 0){ |
| *device = &adev->device.common; |
| audio_device_ref_count++; |
| ALOGD("%s: returning existing instance of adev", __func__); |
| ALOGD("%s: exit", __func__); |
| pthread_mutex_unlock(&adev_init_lock); |
| return 0; |
| } |
| |
| adev = calloc(1, sizeof(struct audio_device)); |
| |
| adev->device.common.tag = HARDWARE_DEVICE_TAG; |
| adev->device.common.version = AUDIO_DEVICE_API_VERSION_2_0; |
| adev->device.common.module = (struct hw_module_t *)module; |
| adev->device.common.close = adev_close; |
| |
| adev->device.init_check = adev_init_check; |
| adev->device.set_voice_volume = adev_set_voice_volume; |
| adev->device.set_master_volume = adev_set_master_volume; |
| adev->device.get_master_volume = adev_get_master_volume; |
| adev->device.set_master_mute = adev_set_master_mute; |
| adev->device.get_master_mute = adev_get_master_mute; |
| adev->device.set_mode = adev_set_mode; |
| adev->device.set_mic_mute = adev_set_mic_mute; |
| adev->device.get_mic_mute = adev_get_mic_mute; |
| adev->device.set_parameters = adev_set_parameters; |
| adev->device.get_parameters = adev_get_parameters; |
| adev->device.get_input_buffer_size = adev_get_input_buffer_size; |
| adev->device.open_output_stream = adev_open_output_stream; |
| adev->device.close_output_stream = adev_close_output_stream; |
| adev->device.open_input_stream = adev_open_input_stream; |
| adev->device.close_input_stream = adev_close_input_stream; |
| adev->device.dump = adev_dump; |
| |
| /* Set the default route before the PCM stream is opened */ |
| adev->mode = AUDIO_MODE_NORMAL; |
| adev->active_input = NULL; |
| adev->primary_output = NULL; |
| adev->out_device = AUDIO_DEVICE_NONE; |
| adev->bluetooth_nrec = true; |
| adev->acdb_settings = TTY_MODE_OFF; |
| /* adev->cur_hdmi_channels = 0; by calloc() */ |
| adev->snd_dev_ref_cnt = calloc(SND_DEVICE_MAX, sizeof(int)); |
| voice_init(adev); |
| list_init(&adev->usecase_list); |
| |
| /* Loads platform specific libraries dynamically */ |
| adev->platform = platform_init(adev); |
| if (!adev->platform) { |
| free(adev->snd_dev_ref_cnt); |
| free(adev); |
| ALOGE("%s: Failed to init platform data, aborting.", __func__); |
| *device = NULL; |
| pthread_mutex_unlock(&adev_init_lock); |
| return -EINVAL; |
| } |
| |
| if (access(VISUALIZER_LIBRARY_PATH, R_OK) == 0) { |
| adev->visualizer_lib = dlopen(VISUALIZER_LIBRARY_PATH, RTLD_NOW); |
| if (adev->visualizer_lib == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| adev->visualizer_start_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_start_output"); |
| adev->visualizer_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_stop_output"); |
| } |
| } |
| audio_extn_listen_init(adev, adev->snd_card); |
| |
| if (access(OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH, R_OK) == 0) { |
| adev->offload_effects_lib = dlopen(OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH, RTLD_NOW); |
| if (adev->offload_effects_lib == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| adev->offload_effects_start_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_start_output"); |
| adev->offload_effects_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_stop_output"); |
| } |
| } |
| |
| *device = &adev->device.common; |
| |
| audio_device_ref_count++; |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| static struct hw_module_methods_t hal_module_methods = { |
| .open = adev_open, |
| }; |
| |
| struct audio_module HAL_MODULE_INFO_SYM = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = AUDIO_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = AUDIO_HARDWARE_MODULE_ID, |
| .name = "QCOM Audio HAL", |
| .author = "The Linux Foundation", |
| .methods = &hal_module_methods, |
| }, |
| }; |