| /* |
| * Copyright (c) 2013-2017, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file was modified by DTS, Inc. The portions of the |
| * code modified by DTS, Inc are copyrighted and |
| * licensed separately, as follows: |
| * |
| * (C) 2014 DTS, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "audio_hw_primary" |
| #define ATRACE_TAG (ATRACE_TAG_AUDIO|ATRACE_TAG_HAL) |
| /*#define LOG_NDEBUG 0*/ |
| /*#define VERY_VERY_VERBOSE_LOGGING*/ |
| #ifdef VERY_VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <sys/time.h> |
| #include <stdlib.h> |
| #include <math.h> |
| #include <dlfcn.h> |
| #include <sys/resource.h> |
| #include <sys/prctl.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/trace.h> |
| #include <cutils/str_parms.h> |
| #include <cutils/properties.h> |
| #include <cutils/atomic.h> |
| #include <cutils/sched_policy.h> |
| |
| #include <hardware/audio_effect.h> |
| #include <system/thread_defs.h> |
| #include <audio_effects/effect_aec.h> |
| #include <audio_effects/effect_ns.h> |
| #include <audio_utils/format.h> |
| #include "audio_hw.h" |
| #include "platform_api.h" |
| #include <platform.h> |
| #include "audio_extn.h" |
| #include "voice_extn.h" |
| |
| #include "sound/compress_params.h" |
| #include "sound/asound.h" |
| |
| #define COMPRESS_OFFLOAD_NUM_FRAGMENTS 4 |
| /*DIRECT PCM has same buffer sizes as DEEP Buffer*/ |
| #define DIRECT_PCM_NUM_FRAGMENTS 2 |
| #define COMPRESS_PLAYBACK_VOLUME_MAX 0x2000 |
| #define DSD_VOLUME_MIN_DB (-110) |
| |
| #define PROXY_OPEN_RETRY_COUNT 100 |
| #define PROXY_OPEN_WAIT_TIME 20 |
| |
| #ifdef USE_LL_AS_PRIMARY_OUTPUT |
| #define USECASE_AUDIO_PLAYBACK_PRIMARY USECASE_AUDIO_PLAYBACK_LOW_LATENCY |
| #define PCM_CONFIG_AUDIO_PLAYBACK_PRIMARY pcm_config_low_latency |
| #else |
| #define USECASE_AUDIO_PLAYBACK_PRIMARY USECASE_AUDIO_PLAYBACK_DEEP_BUFFER |
| #define PCM_CONFIG_AUDIO_PLAYBACK_PRIMARY pcm_config_deep_buffer |
| #endif |
| |
| #define ULL_PERIOD_SIZE (DEFAULT_OUTPUT_SAMPLING_RATE/1000) |
| |
| static unsigned int configured_low_latency_capture_period_size = |
| LOW_LATENCY_CAPTURE_PERIOD_SIZE; |
| |
| struct pcm_config pcm_config_deep_buffer = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = DEEP_BUFFER_OUTPUT_PERIOD_SIZE, |
| .period_count = DEEP_BUFFER_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| struct pcm_config pcm_config_low_latency = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = LOW_LATENCY_OUTPUT_PERIOD_SIZE, |
| .period_count = LOW_LATENCY_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| static int af_period_multiplier = 4; |
| struct pcm_config pcm_config_rt = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = ULL_PERIOD_SIZE, //1 ms |
| .period_count = 512, //=> buffer size is 512ms |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = ULL_PERIOD_SIZE*8, //8ms |
| .stop_threshold = INT_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = ULL_PERIOD_SIZE, //1 ms |
| }; |
| |
| struct pcm_config pcm_config_hdmi_multi = { |
| .channels = HDMI_MULTI_DEFAULT_CHANNEL_COUNT, /* changed when the stream is opened */ |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, /* changed when the stream is opened */ |
| .period_size = HDMI_MULTI_PERIOD_SIZE, |
| .period_count = HDMI_MULTI_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .avail_min = 0, |
| }; |
| |
| struct pcm_config pcm_config_audio_capture = { |
| .channels = 2, |
| .period_count = AUDIO_CAPTURE_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| }; |
| |
| struct pcm_config pcm_config_audio_capture_rt = { |
| .channels = 2, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = ULL_PERIOD_SIZE, |
| .period_count = 512, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = ULL_PERIOD_SIZE, //1 ms |
| }; |
| |
| #define AFE_PROXY_CHANNEL_COUNT 2 |
| #define AFE_PROXY_SAMPLING_RATE 48000 |
| |
| #define AFE_PROXY_PLAYBACK_PERIOD_SIZE 768 |
| #define AFE_PROXY_PLAYBACK_PERIOD_COUNT 4 |
| |
| struct pcm_config pcm_config_afe_proxy_playback = { |
| .channels = AFE_PROXY_CHANNEL_COUNT, |
| .rate = AFE_PROXY_SAMPLING_RATE, |
| .period_size = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| .period_count = AFE_PROXY_PLAYBACK_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| .stop_threshold = INT_MAX, |
| .avail_min = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| }; |
| |
| #define AFE_PROXY_RECORD_PERIOD_SIZE 768 |
| #define AFE_PROXY_RECORD_PERIOD_COUNT 4 |
| |
| struct pcm_config pcm_config_afe_proxy_record = { |
| .channels = AFE_PROXY_CHANNEL_COUNT, |
| .rate = AFE_PROXY_SAMPLING_RATE, |
| .period_size = AFE_PROXY_RECORD_PERIOD_SIZE, |
| .period_count = AFE_PROXY_RECORD_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = AFE_PROXY_RECORD_PERIOD_SIZE, |
| .stop_threshold = INT_MAX, |
| .avail_min = AFE_PROXY_RECORD_PERIOD_SIZE, |
| }; |
| |
| #define AUDIO_MAX_PCM_FORMATS 7 |
| |
| const uint32_t format_to_bitwidth_table[AUDIO_MAX_PCM_FORMATS] = { |
| [AUDIO_FORMAT_DEFAULT] = 0, |
| [AUDIO_FORMAT_PCM_16_BIT] = sizeof(uint16_t), |
| [AUDIO_FORMAT_PCM_8_BIT] = sizeof(uint8_t), |
| [AUDIO_FORMAT_PCM_32_BIT] = sizeof(uint32_t), |
| [AUDIO_FORMAT_PCM_8_24_BIT] = sizeof(uint32_t), |
| [AUDIO_FORMAT_PCM_FLOAT] = sizeof(float), |
| [AUDIO_FORMAT_PCM_24_BIT_PACKED] = sizeof(uint8_t) * 3, |
| }; |
| |
| const char * const use_case_table[AUDIO_USECASE_MAX] = { |
| [USECASE_AUDIO_PLAYBACK_DEEP_BUFFER] = "deep-buffer-playback", |
| [USECASE_AUDIO_PLAYBACK_LOW_LATENCY] = "low-latency-playback", |
| [USECASE_AUDIO_PLAYBACK_ULL] = "audio-ull-playback", |
| [USECASE_AUDIO_PLAYBACK_MULTI_CH] = "multi-channel-playback", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD] = "compress-offload-playback", |
| //Enabled for Direct_PCM |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD2] = "compress-offload-playback2", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD3] = "compress-offload-playback3", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD4] = "compress-offload-playback4", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD5] = "compress-offload-playback5", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD6] = "compress-offload-playback6", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD7] = "compress-offload-playback7", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD8] = "compress-offload-playback8", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD9] = "compress-offload-playback9", |
| |
| [USECASE_AUDIO_RECORD] = "audio-record", |
| [USECASE_AUDIO_RECORD_COMPRESS] = "audio-record-compress", |
| [USECASE_AUDIO_RECORD_COMPRESS2] = "audio-record-compress2", |
| [USECASE_AUDIO_RECORD_COMPRESS3] = "audio-record-compress3", |
| [USECASE_AUDIO_RECORD_COMPRESS4] = "audio-record-compress4", |
| [USECASE_AUDIO_RECORD_LOW_LATENCY] = "low-latency-record", |
| [USECASE_AUDIO_RECORD_FM_VIRTUAL] = "fm-virtual-record", |
| [USECASE_AUDIO_PLAYBACK_FM] = "play-fm", |
| [USECASE_AUDIO_HFP_SCO] = "hfp-sco", |
| [USECASE_AUDIO_HFP_SCO_WB] = "hfp-sco-wb", |
| [USECASE_VOICE_CALL] = "voice-call", |
| |
| [USECASE_VOICE2_CALL] = "voice2-call", |
| [USECASE_VOLTE_CALL] = "volte-call", |
| [USECASE_QCHAT_CALL] = "qchat-call", |
| [USECASE_VOWLAN_CALL] = "vowlan-call", |
| [USECASE_VOICEMMODE1_CALL] = "voicemmode1-call", |
| [USECASE_VOICEMMODE2_CALL] = "voicemmode2-call", |
| [USECASE_COMPRESS_VOIP_CALL] = "compress-voip-call", |
| [USECASE_INCALL_REC_UPLINK] = "incall-rec-uplink", |
| [USECASE_INCALL_REC_DOWNLINK] = "incall-rec-downlink", |
| [USECASE_INCALL_REC_UPLINK_AND_DOWNLINK] = "incall-rec-uplink-and-downlink", |
| [USECASE_INCALL_REC_UPLINK_COMPRESS] = "incall-rec-uplink-compress", |
| [USECASE_INCALL_REC_DOWNLINK_COMPRESS] = "incall-rec-downlink-compress", |
| [USECASE_INCALL_REC_UPLINK_AND_DOWNLINK_COMPRESS] = "incall-rec-uplink-and-downlink-compress", |
| |
| [USECASE_INCALL_MUSIC_UPLINK] = "incall_music_uplink", |
| [USECASE_INCALL_MUSIC_UPLINK2] = "incall_music_uplink2", |
| [USECASE_AUDIO_SPKR_CALIB_RX] = "spkr-rx-calib", |
| [USECASE_AUDIO_SPKR_CALIB_TX] = "spkr-vi-record", |
| |
| [USECASE_AUDIO_PLAYBACK_AFE_PROXY] = "afe-proxy-playback", |
| [USECASE_AUDIO_RECORD_AFE_PROXY] = "afe-proxy-record", |
| [USECASE_AUDIO_PLAYBACK_EXT_DISP_SILENCE] = "silence-playback", |
| }; |
| |
| static const audio_usecase_t offload_usecases[] = { |
| USECASE_AUDIO_PLAYBACK_OFFLOAD, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD2, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD3, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD4, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD5, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD6, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD7, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD8, |
| USECASE_AUDIO_PLAYBACK_OFFLOAD9, |
| }; |
| |
| #define STRING_TO_ENUM(string) { #string, string } |
| |
| struct string_to_enum { |
| const char *name; |
| uint32_t value; |
| }; |
| |
| static const struct string_to_enum out_channels_name_to_enum_table[] = { |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_STEREO), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_2POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_QUAD), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_SURROUND), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_PENTA), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_5POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_6POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_7POINT1), |
| }; |
| |
| static const struct string_to_enum out_formats_name_to_enum_table[] = { |
| STRING_TO_ENUM(AUDIO_FORMAT_AC3), |
| STRING_TO_ENUM(AUDIO_FORMAT_E_AC3), |
| STRING_TO_ENUM(AUDIO_FORMAT_E_AC3_JOC), |
| STRING_TO_ENUM(AUDIO_FORMAT_DTS), |
| STRING_TO_ENUM(AUDIO_FORMAT_DTS_HD), |
| }; |
| |
| //list of all supported sample rates by HDMI specification. |
| static const int out_hdmi_sample_rates[] = { |
| 32000, 44100, 48000, 88200, 96000, 176400, 192000, |
| }; |
| |
| static const struct string_to_enum out_hdmi_sample_rates_name_to_enum_table[] = { |
| STRING_TO_ENUM(32000), |
| STRING_TO_ENUM(44100), |
| STRING_TO_ENUM(48000), |
| STRING_TO_ENUM(88200), |
| STRING_TO_ENUM(96000), |
| STRING_TO_ENUM(176400), |
| STRING_TO_ENUM(192000), |
| }; |
| |
| static struct audio_device *adev = NULL; |
| static pthread_mutex_t adev_init_lock; |
| static unsigned int audio_device_ref_count; |
| //cache last MBDRC cal step level |
| static int last_known_cal_step = -1 ; |
| |
| static bool may_use_noirq_mode(struct audio_device *adev, audio_usecase_t uc_id, |
| int flags __unused) |
| { |
| int dir = 0; |
| switch (uc_id) { |
| case USECASE_AUDIO_RECORD_LOW_LATENCY: |
| dir = 1; |
| case USECASE_AUDIO_PLAYBACK_ULL: |
| break; |
| default: |
| return false; |
| } |
| |
| int dev_id = platform_get_pcm_device_id(uc_id, dir == 0 ? |
| PCM_PLAYBACK : PCM_CAPTURE); |
| if (adev->adm_is_noirq_avail) |
| return adev->adm_is_noirq_avail(adev->adm_data, |
| adev->snd_card, dev_id, dir); |
| return false; |
| } |
| |
| static void register_out_stream(struct stream_out *out) |
| { |
| struct audio_device *adev = out->dev; |
| if (is_offload_usecase(out->usecase) || |
| !adev->adm_register_output_stream) |
| return; |
| |
| // register stream first for backward compatibility |
| adev->adm_register_output_stream(adev->adm_data, |
| out->handle, |
| out->flags); |
| |
| if (!adev->adm_set_config) |
| return; |
| |
| if (out->realtime) |
| adev->adm_set_config(adev->adm_data, |
| out->handle, |
| out->pcm, &out->config); |
| } |
| |
| static void register_in_stream(struct stream_in *in) |
| { |
| struct audio_device *adev = in->dev; |
| if (!adev->adm_register_input_stream) |
| return; |
| |
| adev->adm_register_input_stream(adev->adm_data, |
| in->capture_handle, |
| in->flags); |
| |
| if (!adev->adm_set_config) |
| return; |
| |
| if (in->realtime) |
| adev->adm_set_config(adev->adm_data, |
| in->capture_handle, |
| in->pcm, |
| &in->config); |
| } |
| |
| static void request_out_focus(struct stream_out *out, long ns) |
| { |
| struct audio_device *adev = out->dev; |
| |
| if (adev->adm_request_focus_v2) |
| adev->adm_request_focus_v2(adev->adm_data, out->handle, ns); |
| else if (adev->adm_request_focus) |
| adev->adm_request_focus(adev->adm_data, out->handle); |
| } |
| |
| static void request_in_focus(struct stream_in *in, long ns) |
| { |
| struct audio_device *adev = in->dev; |
| |
| if (adev->adm_request_focus_v2) |
| adev->adm_request_focus_v2(adev->adm_data, in->capture_handle, ns); |
| else if (adev->adm_request_focus) |
| adev->adm_request_focus(adev->adm_data, in->capture_handle); |
| } |
| |
| static void release_out_focus(struct stream_out *out) |
| { |
| struct audio_device *adev = out->dev; |
| |
| if (adev->adm_abandon_focus) |
| adev->adm_abandon_focus(adev->adm_data, out->handle); |
| } |
| |
| static void release_in_focus(struct stream_in *in) |
| { |
| struct audio_device *adev = in->dev; |
| if (adev->adm_abandon_focus) |
| adev->adm_abandon_focus(adev->adm_data, in->capture_handle); |
| } |
| |
| __attribute__ ((visibility ("default"))) |
| bool audio_hw_send_gain_dep_calibration(int level) { |
| bool ret_val = false; |
| ALOGV("%s: called ...", __func__); |
| |
| pthread_mutex_lock(&adev_init_lock); |
| |
| if (adev != NULL && adev->platform != NULL) { |
| pthread_mutex_lock(&adev->lock); |
| ret_val = platform_send_gain_dep_cal(adev->platform, level); |
| |
| // if cal set fails, cache level info |
| // if cal set succeds, reset known last cal set |
| if (!ret_val) |
| last_known_cal_step = level; |
| else if (last_known_cal_step != -1) |
| last_known_cal_step = -1; |
| |
| pthread_mutex_unlock(&adev->lock); |
| } else { |
| ALOGE("%s: %s is NULL", __func__, adev == NULL ? "adev" : "adev->platform"); |
| } |
| |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| return ret_val; |
| } |
| |
| static int check_and_set_gapless_mode(struct audio_device *adev, bool enable_gapless) |
| { |
| bool gapless_enabled = false; |
| const char *mixer_ctl_name = "Compress Gapless Playback"; |
| struct mixer_ctl *ctl; |
| |
| ALOGV("%s:", __func__); |
| gapless_enabled = property_get_bool("audio.offload.gapless.enabled", false); |
| |
| /*Disable gapless if its AV playback*/ |
| gapless_enabled = gapless_enabled && enable_gapless; |
| |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, mixer_ctl_name); |
| return -EINVAL; |
| } |
| |
| if (mixer_ctl_set_value(ctl, 0, gapless_enabled) < 0) { |
| ALOGE("%s: Could not set gapless mode %d", |
| __func__, gapless_enabled); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| __attribute__ ((visibility ("default"))) |
| int audio_hw_get_gain_level_mapping(struct amp_db_and_gain_table *mapping_tbl, |
| int table_size) { |
| int ret_val = 0; |
| ALOGV("%s: enter ... ", __func__); |
| |
| pthread_mutex_lock(&adev_init_lock); |
| if (adev == NULL) { |
| ALOGW("%s: adev is NULL .... ", __func__); |
| goto done; |
| } |
| |
| pthread_mutex_lock(&adev->lock); |
| ret_val = platform_get_gain_level_mapping(mapping_tbl, table_size); |
| pthread_mutex_unlock(&adev->lock); |
| done: |
| pthread_mutex_unlock(&adev_init_lock); |
| ALOGV("%s: exit ... ", __func__); |
| return ret_val; |
| } |
| |
| static bool is_supported_format(audio_format_t format) |
| { |
| if (format == AUDIO_FORMAT_MP3 || |
| format == AUDIO_FORMAT_MP2 || |
| format == AUDIO_FORMAT_AAC_LC || |
| format == AUDIO_FORMAT_AAC_HE_V1 || |
| format == AUDIO_FORMAT_AAC_HE_V2 || |
| format == AUDIO_FORMAT_AAC_ADTS_LC || |
| format == AUDIO_FORMAT_AAC_ADTS_HE_V1 || |
| format == AUDIO_FORMAT_AAC_ADTS_HE_V2 || |
| format == AUDIO_FORMAT_AAC_LATM_LC || |
| format == AUDIO_FORMAT_AAC_LATM_HE_V1 || |
| format == AUDIO_FORMAT_AAC_LATM_HE_V2 || |
| format == AUDIO_FORMAT_PCM_24_BIT_PACKED || |
| format == AUDIO_FORMAT_PCM_8_24_BIT || |
| format == AUDIO_FORMAT_PCM_FLOAT || |
| format == AUDIO_FORMAT_PCM_32_BIT || |
| format == AUDIO_FORMAT_PCM_16_BIT || |
| format == AUDIO_FORMAT_AC3 || |
| format == AUDIO_FORMAT_E_AC3 || |
| format == AUDIO_FORMAT_DTS || |
| format == AUDIO_FORMAT_DTS_HD || |
| format == AUDIO_FORMAT_FLAC || |
| format == AUDIO_FORMAT_ALAC || |
| format == AUDIO_FORMAT_APE || |
| format == AUDIO_FORMAT_DSD || |
| format == AUDIO_FORMAT_VORBIS || |
| format == AUDIO_FORMAT_WMA || |
| format == AUDIO_FORMAT_WMA_PRO || |
| format == AUDIO_FORMAT_APTX) |
| return true; |
| |
| return false; |
| } |
| |
| static inline bool is_mmap_usecase(audio_usecase_t uc_id) |
| { |
| return (uc_id == USECASE_AUDIO_RECORD_AFE_PROXY) || |
| (uc_id == USECASE_AUDIO_PLAYBACK_AFE_PROXY); |
| } |
| |
| int get_snd_card_state(struct audio_device *adev) |
| { |
| int snd_scard_state; |
| |
| if (!adev) |
| return SND_CARD_STATE_OFFLINE; |
| |
| pthread_mutex_lock(&adev->snd_card_status.lock); |
| snd_scard_state = adev->snd_card_status.state; |
| pthread_mutex_unlock(&adev->snd_card_status.lock); |
| |
| return snd_scard_state; |
| } |
| |
| static int set_snd_card_state(struct audio_device *adev, int snd_scard_state) |
| { |
| if (!adev) |
| return -ENOSYS; |
| |
| pthread_mutex_lock(&adev->snd_card_status.lock); |
| if (adev->snd_card_status.state != snd_scard_state) { |
| adev->snd_card_status.state = snd_scard_state; |
| platform_snd_card_update(adev->platform, snd_scard_state); |
| } |
| pthread_mutex_unlock(&adev->snd_card_status.lock); |
| |
| return 0; |
| } |
| |
| static int enable_audio_route_for_voice_usecases(struct audio_device *adev, |
| struct audio_usecase *uc_info) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| |
| if (uc_info == NULL) |
| return -EINVAL; |
| |
| /* Re-route all voice usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if ((usecase->type == VOICE_CALL) && (usecase != uc_info)) |
| enable_audio_route(adev, usecase); |
| } |
| return 0; |
| } |
| |
| static void enable_asrc_mode(struct audio_device *adev) |
| { |
| ALOGV("%s", __func__); |
| audio_route_apply_and_update_path(adev->audio_route, |
| "asrc-mode"); |
| adev->asrc_mode_enabled = true; |
| } |
| |
| static void disable_asrc_mode(struct audio_device *adev) |
| { |
| ALOGV("%s", __func__); |
| audio_route_reset_and_update_path(adev->audio_route, |
| "asrc-mode"); |
| adev->asrc_mode_enabled = false; |
| } |
| |
| /* |
| * - Enable ASRC mode for incoming mix path use case(Headphone backend)if Headphone |
| * 44.1 or Native DSD backends are enabled for any of current use case. |
| * e.g. 48-> + (Naitve DSD or Headphone 44.1) |
| * - Disable current mix path use case(Headphone backend) and re-enable it with |
| * ASRC mode for incoming Headphone 44.1 or Native DSD use case. |
| * e.g. Naitve DSD or Headphone 44.1 -> + 48 |
| */ |
| static void check_and_set_asrc_mode(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| ALOGV("%s snd device %d", __func__, snd_device); |
| int i, num_new_devices = 0; |
| snd_device_t split_new_snd_devices[SND_DEVICE_OUT_END]; |
| /* |
| *Split snd device for new combo use case |
| *e.g. Headphopne 44.1-> + Ringtone (Headphone + Speaker) |
| */ |
| if (platform_split_snd_device(adev->platform, |
| snd_device, |
| &num_new_devices, |
| split_new_snd_devices) == 0) { |
| for (i = 0; i < num_new_devices; i++) |
| check_and_set_asrc_mode(adev, uc_info, split_new_snd_devices[i]); |
| } else { |
| int new_backend_idx = platform_get_backend_index(snd_device); |
| if (((new_backend_idx == HEADPHONE_BACKEND) || |
| (new_backend_idx == HEADPHONE_44_1_BACKEND) || |
| (new_backend_idx == DSD_NATIVE_BACKEND)) && |
| !adev->asrc_mode_enabled) { |
| struct listnode *node = NULL; |
| struct audio_usecase *uc = NULL; |
| struct stream_out *curr_out = NULL; |
| int usecase_backend_idx = DEFAULT_CODEC_BACKEND; |
| int i, num_devices, ret = 0; |
| snd_device_t split_snd_devices[SND_DEVICE_OUT_END]; |
| |
| list_for_each(node, &adev->usecase_list) { |
| uc = node_to_item(node, struct audio_usecase, list); |
| curr_out = (struct stream_out*) uc->stream.out; |
| if (curr_out && PCM_PLAYBACK == uc->type && uc != uc_info) { |
| /* |
| *Split snd device for existing combo use case |
| *e.g. Ringtone (Headphone + Speaker) + Headphopne 44.1 |
| */ |
| ret = platform_split_snd_device(adev->platform, |
| uc->out_snd_device, |
| &num_devices, |
| split_snd_devices); |
| if (ret < 0 || num_devices == 0) { |
| ALOGV("%s: Unable to split uc->out_snd_device: %d",__func__, uc->out_snd_device); |
| split_snd_devices[0] = uc->out_snd_device; |
| num_devices = 1; |
| } |
| for (i = 0; i < num_devices; i++) { |
| usecase_backend_idx = platform_get_backend_index(split_snd_devices[i]); |
| ALOGD("%s:snd_dev %d usecase_backend_idx %d",__func__, split_snd_devices[i],usecase_backend_idx); |
| if((new_backend_idx == HEADPHONE_BACKEND) && |
| ((usecase_backend_idx == HEADPHONE_44_1_BACKEND) || |
| (usecase_backend_idx == DSD_NATIVE_BACKEND))) { |
| ALOGD("%s:DSD or native stream detected enabling asrcmode in hardware", |
| __func__); |
| enable_asrc_mode(adev); |
| break; |
| } else if(((new_backend_idx == HEADPHONE_44_1_BACKEND) || |
| (new_backend_idx == DSD_NATIVE_BACKEND)) && |
| (usecase_backend_idx == HEADPHONE_BACKEND)) { |
| ALOGD("%s:48K stream detected, disabling and enabling it with asrcmode in hardware", |
| __func__); |
| disable_audio_route(adev, uc); |
| disable_snd_device(adev, uc->out_snd_device); |
| // Apply true-high-quality-mode if DSD or > 44.1KHz or >=24-bit |
| if (new_backend_idx == DSD_NATIVE_BACKEND) |
| audio_route_apply_and_update_path(adev->audio_route, |
| "hph-true-highquality-mode"); |
| else if ((new_backend_idx == HEADPHONE_44_1_BACKEND) && |
| (curr_out->bit_width >= 24)) |
| audio_route_apply_and_update_path(adev->audio_route, |
| "hph-highquality-mode"); |
| enable_asrc_mode(adev); |
| enable_snd_device(adev, uc->out_snd_device); |
| enable_audio_route(adev, uc); |
| break; |
| } |
| } |
| // reset split devices count |
| num_devices = 0; |
| } |
| if (adev->asrc_mode_enabled) |
| break; |
| } |
| } |
| } |
| } |
| |
| int pcm_ioctl(struct pcm *pcm, int request, ...) |
| { |
| va_list ap; |
| void * arg; |
| int pcm_fd = *(int*)pcm; |
| |
| va_start(ap, request); |
| arg = va_arg(ap, void *); |
| va_end(ap); |
| |
| return ioctl(pcm_fd, request, arg); |
| } |
| |
| int enable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase) |
| { |
| snd_device_t snd_device; |
| char mixer_path[MIXER_PATH_MAX_LENGTH]; |
| struct stream_out *out = NULL; |
| |
| if (usecase == NULL) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| |
| #ifdef DS1_DOLBY_DAP_ENABLED |
| audio_extn_dolby_set_dmid(adev); |
| audio_extn_dolby_set_endpoint(adev); |
| #endif |
| audio_extn_dolby_ds2_set_endpoint(adev); |
| audio_extn_sound_trigger_update_stream_status(usecase, ST_EVENT_STREAM_BUSY); |
| audio_extn_listen_update_stream_status(usecase, LISTEN_EVENT_STREAM_BUSY); |
| audio_extn_utils_send_app_type_cfg(adev, usecase); |
| audio_extn_utils_send_audio_calibration(adev, usecase); |
| if ((usecase->type == PCM_PLAYBACK) && is_offload_usecase(usecase->id)) { |
| out = usecase->stream.out; |
| if (out && out->compr) |
| audio_extn_utils_compress_set_clk_rec_mode(usecase); |
| } |
| |
| strlcpy(mixer_path, use_case_table[usecase->id], MIXER_PATH_MAX_LENGTH); |
| platform_add_backend_name(mixer_path, snd_device, usecase); |
| ALOGD("%s: apply mixer and update path: %s", __func__, mixer_path); |
| audio_route_apply_and_update_path(adev->audio_route, mixer_path); |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int disable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase) |
| { |
| snd_device_t snd_device; |
| char mixer_path[MIXER_PATH_MAX_LENGTH]; |
| |
| if (usecase == NULL || usecase->id == USECASE_INVALID) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| strlcpy(mixer_path, use_case_table[usecase->id], MIXER_PATH_MAX_LENGTH); |
| platform_add_backend_name(mixer_path, snd_device, usecase); |
| ALOGD("%s: reset and update mixer path: %s", __func__, mixer_path); |
| audio_route_reset_and_update_path(adev->audio_route, mixer_path); |
| audio_extn_sound_trigger_update_stream_status(usecase, ST_EVENT_STREAM_FREE); |
| audio_extn_listen_update_stream_status(usecase, LISTEN_EVENT_STREAM_FREE); |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int enable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device) |
| { |
| int i, num_devices = 0; |
| snd_device_t new_snd_devices[SND_DEVICE_OUT_END]; |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| return -EINVAL; |
| } |
| |
| adev->snd_dev_ref_cnt[snd_device]++; |
| |
| if(platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0 ) { |
| ALOGE("%s: Invalid sound device returned", __func__); |
| return -EINVAL; |
| } |
| if (adev->snd_dev_ref_cnt[snd_device] > 1) { |
| ALOGV("%s: snd_device(%d: %s) is already active", |
| __func__, snd_device, device_name); |
| return 0; |
| } |
| |
| |
| if (audio_extn_spkr_prot_is_enabled()) |
| audio_extn_spkr_prot_calib_cancel(adev); |
| |
| if (platform_can_enable_spkr_prot_on_device(snd_device) && |
| audio_extn_spkr_prot_is_enabled()) { |
| if (platform_get_spkr_prot_acdb_id(snd_device) < 0) { |
| adev->snd_dev_ref_cnt[snd_device]--; |
| return -EINVAL; |
| } |
| audio_extn_dev_arbi_acquire(snd_device); |
| if (audio_extn_spkr_prot_start_processing(snd_device)) { |
| ALOGE("%s: spkr_start_processing failed", __func__); |
| audio_extn_dev_arbi_release(snd_device); |
| return -EINVAL; |
| } |
| } else if (platform_split_snd_device(adev->platform, |
| snd_device, |
| &num_devices, |
| new_snd_devices) == 0) { |
| for (i = 0; i < num_devices; i++) { |
| enable_snd_device(adev, new_snd_devices[i]); |
| } |
| } else { |
| ALOGD("%s: snd_device(%d: %s)", __func__, snd_device, device_name); |
| |
| |
| if ((SND_DEVICE_OUT_BT_A2DP == snd_device) && |
| (audio_extn_a2dp_start_playback() < 0)) { |
| ALOGE(" fail to configure A2dp control path "); |
| return -EINVAL; |
| } |
| |
| /* due to the possibility of calibration overwrite between listen |
| and audio, notify listen hal before audio calibration is sent */ |
| audio_extn_sound_trigger_update_device_status(snd_device, |
| ST_EVENT_SND_DEVICE_BUSY); |
| audio_extn_listen_update_device_status(snd_device, |
| LISTEN_EVENT_SND_DEVICE_BUSY); |
| if (platform_get_snd_device_acdb_id(snd_device) < 0) { |
| adev->snd_dev_ref_cnt[snd_device]--; |
| audio_extn_sound_trigger_update_device_status(snd_device, |
| ST_EVENT_SND_DEVICE_FREE); |
| audio_extn_listen_update_device_status(snd_device, |
| LISTEN_EVENT_SND_DEVICE_FREE); |
| return -EINVAL; |
| } |
| audio_extn_dev_arbi_acquire(snd_device); |
| audio_route_apply_and_update_path(adev->audio_route, device_name); |
| |
| if (SND_DEVICE_OUT_HEADPHONES == snd_device && |
| !adev->native_playback_enabled && |
| audio_is_true_native_stream_active(adev)) { |
| ALOGD("%s: %d: napb: enabling native mode in hardware", |
| __func__, __LINE__); |
| audio_route_apply_and_update_path(adev->audio_route, |
| "true-native-mode"); |
| adev->native_playback_enabled = true; |
| } |
| } |
| return 0; |
| } |
| |
| int disable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device) |
| { |
| int i, num_devices = 0; |
| snd_device_t new_snd_devices[SND_DEVICE_OUT_END]; |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| return -EINVAL; |
| } |
| if (adev->snd_dev_ref_cnt[snd_device] <= 0) { |
| ALOGE("%s: device ref cnt is already 0", __func__); |
| return -EINVAL; |
| } |
| |
| adev->snd_dev_ref_cnt[snd_device]--; |
| |
| if(platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0) { |
| ALOGE("%s: Invalid sound device returned", __func__); |
| return -EINVAL; |
| } |
| |
| if (adev->snd_dev_ref_cnt[snd_device] == 0) { |
| ALOGD("%s: snd_device(%d: %s)", __func__, snd_device, device_name); |
| |
| if (platform_can_enable_spkr_prot_on_device(snd_device) && |
| audio_extn_spkr_prot_is_enabled()) { |
| audio_extn_spkr_prot_stop_processing(snd_device); |
| } else if (platform_split_snd_device(adev->platform, |
| snd_device, |
| &num_devices, |
| new_snd_devices) == 0) { |
| for (i = 0; i < num_devices; i++) { |
| disable_snd_device(adev, new_snd_devices[i]); |
| } |
| } else { |
| audio_route_reset_and_update_path(adev->audio_route, device_name); |
| } |
| |
| if (SND_DEVICE_OUT_BT_A2DP == snd_device) |
| audio_extn_a2dp_stop_playback(); |
| |
| if (snd_device == SND_DEVICE_OUT_HDMI || snd_device == SND_DEVICE_OUT_DISPLAY_PORT) |
| adev->is_channel_status_set = false; |
| else if (SND_DEVICE_OUT_HEADPHONES == snd_device && |
| adev->native_playback_enabled) { |
| ALOGD("%s: %d: napb: disabling native mode in hardware", |
| __func__, __LINE__); |
| audio_route_reset_and_update_path(adev->audio_route, |
| "true-native-mode"); |
| adev->native_playback_enabled = false; |
| } else if (SND_DEVICE_OUT_HEADPHONES == snd_device && |
| adev->asrc_mode_enabled) { |
| ALOGD("%s: %d: disabling asrc mode in hardware", __func__, __LINE__); |
| disable_asrc_mode(adev); |
| audio_route_apply_and_update_path(adev->audio_route, "hph-lowpower-mode"); |
| } |
| |
| audio_extn_dev_arbi_release(snd_device); |
| audio_extn_sound_trigger_update_device_status(snd_device, |
| ST_EVENT_SND_DEVICE_FREE); |
| audio_extn_listen_update_device_status(snd_device, |
| LISTEN_EVENT_SND_DEVICE_FREE); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| legend: |
| uc - existing usecase |
| new_uc - new usecase |
| d1, d11, d2 - SND_DEVICE enums |
| a1, a2 - corresponding ANDROID device enums |
| B1, B2 - backend strings |
| |
| case 1 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d1 (a1), d2 (a2) B1, B2 |
| |
| resolution: disable and enable uc->dev on d1 |
| |
| case 2 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d11 (a1) B1 |
| |
| resolution: need to switch uc since d1 and d11 are related |
| (e.g. speaker and voice-speaker) |
| use ANDROID_DEVICE_OUT enums to match devices since SND_DEVICE enums may vary |
| |
| case 3 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d2 (a2) B2 |
| |
| resolution: no need to switch uc |
| |
| case 4 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d2 (a2) B1 |
| |
| resolution: disable enable uc-dev on d2 since backends match |
| we cannot enable two streams on two different devices if they |
| share the same backend. e.g. if offload is on speaker device using |
| QUAD_MI2S backend and a low-latency stream is started on voice-handset |
| using the same backend, offload must also be switched to voice-handset. |
| |
| case 5 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d1 (a1), d2 (a2) B1 |
| |
| resolution: disable enable uc-dev on d2 since backends match |
| we cannot enable two streams on two different devices if they |
| share the same backend. |
| |
| case 6 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d2 (a1) B2 |
| |
| resolution: no need to switch |
| |
| case 7 |
| uc->dev d1 (a1), d2 (a2) B1, B2 |
| new_uc->dev d1 (a1) B1 |
| |
| resolution: no need to switch |
| |
| */ |
| static snd_device_t derive_playback_snd_device(void * platform, |
| struct audio_usecase *uc, |
| struct audio_usecase *new_uc, |
| snd_device_t new_snd_device) |
| { |
| audio_devices_t a1 = uc->stream.out->devices; |
| audio_devices_t a2 = new_uc->stream.out->devices; |
| |
| snd_device_t d1 = uc->out_snd_device; |
| snd_device_t d2 = new_snd_device; |
| |
| // Treat as a special case when a1 and a2 are not disjoint |
| if ((a1 != a2) && (a1 & a2)) { |
| snd_device_t d3[2]; |
| int num_devices = 0; |
| int ret = platform_split_snd_device(platform, |
| popcount(a1) > 1 ? d1 : d2, |
| &num_devices, |
| d3); |
| if (ret < 0) { |
| if (ret != -ENOSYS) { |
| ALOGW("%s failed to split snd_device %d", |
| __func__, |
| popcount(a1) > 1 ? d1 : d2); |
| } |
| goto end; |
| } |
| |
| // NB: case 7 is hypothetical and isn't a practical usecase yet. |
| // But if it does happen, we need to give priority to d2 if |
| // the combo devices active on the existing usecase share a backend. |
| // This is because we cannot have a usecase active on a combo device |
| // and a new usecase requests one device in this combo pair. |
| if (platform_check_backends_match(d3[0], d3[1])) { |
| return d2; // case 5 |
| } else { |
| return d1; // case 1 |
| } |
| } else { |
| if (platform_check_backends_match(d1, d2)) { |
| return d2; // case 2, 4 |
| } else { |
| return d1; // case 6, 3 |
| } |
| } |
| |
| end: |
| return d2; // return whatever was calculated before. |
| } |
| |
| static void check_usecases_codec_backend(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| snd_device_t uc_derive_snd_device; |
| snd_device_t derive_snd_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| int status = 0; |
| bool force_restart_session = false; |
| /* |
| * This function is to make sure that all the usecases that are active on |
| * the hardware codec backend are always routed to any one device that is |
| * handled by the hardware codec. |
| * For example, if low-latency and deep-buffer usecases are currently active |
| * on speaker and out_set_parameters(headset) is received on low-latency |
| * output, then we have to make sure deep-buffer is also switched to headset, |
| * because of the limitation that both the devices cannot be enabled |
| * at the same time as they share the same backend. |
| */ |
| /* |
| * This call is to check if we need to force routing for a particular stream |
| * If there is a backend configuration change for the device when a |
| * new stream starts, then ADM needs to be closed and re-opened with the new |
| * configuraion. This call check if we need to re-route all the streams |
| * associated with the backend. Touch tone + 24 bit + native playback. |
| */ |
| bool force_routing = platform_check_and_set_codec_backend_cfg(adev, uc_info, |
| snd_device); |
| /* For a2dp device reconfigure all active sessions |
| * with new AFE encoder format based on a2dp state |
| */ |
| if ((SND_DEVICE_OUT_BT_A2DP == snd_device || |
| SND_DEVICE_OUT_SPEAKER_AND_BT_A2DP == snd_device) && |
| audio_extn_a2dp_is_force_device_switch()) { |
| force_routing = true; |
| force_restart_session = true; |
| } |
| ALOGD("%s:becf: force routing %d", __func__, force_routing); |
| |
| /* Disable all the usecases on the shared backend other than the |
| * specified usecase. |
| */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| |
| ALOGD("%s:becf: (%d) check_usecases curr device: %s, usecase device:%s " |
| "backends match %d",__func__, i, |
| platform_get_snd_device_name(snd_device), |
| platform_get_snd_device_name(usecase->out_snd_device), |
| platform_check_backends_match(snd_device, usecase->out_snd_device)); |
| if ((usecase->type != PCM_CAPTURE) && (usecase != uc_info)) { |
| uc_derive_snd_device = derive_playback_snd_device(adev->platform, |
| usecase, uc_info, snd_device); |
| if (((uc_derive_snd_device != usecase->out_snd_device) || force_routing) && |
| ((usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) || |
| (usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) || |
| (usecase->devices & AUDIO_DEVICE_OUT_USB_DEVICE) || |
| (usecase->devices & AUDIO_DEVICE_OUT_ALL_A2DP) || |
| (usecase->devices & AUDIO_DEVICE_OUT_ALL_SCO)) && |
| ((force_restart_session) || |
| (platform_check_backends_match(snd_device, usecase->out_snd_device)))) { |
| ALOGD("%s:becf: check_usecases (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->out_snd_device)); |
| disable_audio_route(adev, usecase); |
| switch_device[usecase->id] = true; |
| /* Enable existing usecase on derived playback device */ |
| derive_snd_device[usecase->id] = uc_derive_snd_device; |
| num_uc_to_switch++; |
| } |
| } |
| } |
| |
| ALOGD("%s:becf: check_usecases num.of Usecases to switch %d", __func__, |
| num_uc_to_switch); |
| |
| if (num_uc_to_switch) { |
| /* All streams have been de-routed. Disable the device */ |
| |
| /* Make sure the previous devices to be disabled first and then enable the |
| selected devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->out_snd_device); |
| } |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| enable_snd_device(adev, derive_snd_device[usecase->id]); |
| } |
| } |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* Update the out_snd_device only before enabling the audio route */ |
| if (switch_device[usecase->id]) { |
| usecase->out_snd_device = derive_snd_device[usecase->id]; |
| if (usecase->type != VOICE_CALL) { |
| ALOGD("%s:becf: enabling usecase (%s) on (%s)", __func__, |
| use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->out_snd_device)); |
| /* Update voc calibration before enabling VoIP route */ |
| if (usecase->type == VOIP_CALL) |
| status = platform_switch_voice_call_device_post(adev->platform, |
| usecase->out_snd_device, |
| platform_get_input_snd_device(adev->platform, uc_info->devices)); |
| enable_audio_route(adev, usecase); |
| } |
| } |
| } |
| } |
| } |
| |
| static void check_usecases_capture_codec_backend(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| int backend_check_cond = AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND; |
| int status = 0; |
| |
| bool force_routing = platform_check_and_set_capture_codec_backend_cfg(adev, uc_info, |
| snd_device); |
| ALOGD("%s:becf: force routing %d", __func__, force_routing); |
| |
| /* |
| * Make sure out devices is checked against out codec backend device and |
| * also in devices against in codec backend. Checking out device against in |
| * codec backend or vice versa causes issues. |
| */ |
| if (uc_info->type == PCM_CAPTURE) |
| backend_check_cond = AUDIO_DEVICE_IN_ALL_CODEC_BACKEND; |
| /* |
| * This function is to make sure that all the active capture usecases |
| * are always routed to the same input sound device. |
| * For example, if audio-record and voice-call usecases are currently |
| * active on speaker(rx) and speaker-mic (tx) and out_set_parameters(earpiece) |
| * is received for voice call then we have to make sure that audio-record |
| * usecase is also switched to earpiece i.e. voice-dmic-ef, |
| * because of the limitation that two devices cannot be enabled |
| * at the same time if they share the same backend. |
| */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* |
| * TODO: Enhance below condition to handle BT sco/USB multi recording |
| */ |
| if (usecase->type != PCM_PLAYBACK && |
| usecase != uc_info && |
| (usecase->in_snd_device != snd_device || force_routing) && |
| ((uc_info->devices & backend_check_cond) && |
| (((usecase->devices & ~AUDIO_DEVICE_BIT_IN) & AUDIO_DEVICE_IN_ALL_CODEC_BACKEND) || |
| (usecase->type == VOIP_CALL))) && |
| (usecase->id != USECASE_AUDIO_SPKR_CALIB_TX)) { |
| ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->in_snd_device)); |
| disable_audio_route(adev, usecase); |
| switch_device[usecase->id] = true; |
| num_uc_to_switch++; |
| } |
| } |
| |
| if (num_uc_to_switch) { |
| /* All streams have been de-routed. Disable the device */ |
| |
| /* Make sure the previous devices to be disabled first and then enable the |
| selected devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->in_snd_device); |
| } |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| enable_snd_device(adev, snd_device); |
| } |
| } |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* Update the in_snd_device only before enabling the audio route */ |
| if (switch_device[usecase->id] ) { |
| usecase->in_snd_device = snd_device; |
| if (usecase->type != VOICE_CALL) { |
| /* Update voc calibration before enabling VoIP route */ |
| if (usecase->type == VOIP_CALL) |
| status = platform_switch_voice_call_device_post(adev->platform, |
| usecase->out_snd_device, |
| usecase->in_snd_device); |
| enable_audio_route(adev, usecase); |
| } |
| } |
| } |
| } |
| } |
| |
| static void reset_hdmi_sink_caps(struct stream_out *out) { |
| int i = 0; |
| |
| for (i = 0; i<= MAX_SUPPORTED_CHANNEL_MASKS; i++) { |
| out->supported_channel_masks[i] = 0; |
| } |
| for (i = 0; i<= MAX_SUPPORTED_FORMATS; i++) { |
| out->supported_formats[i] = 0; |
| } |
| for (i = 0; i<= MAX_SUPPORTED_SAMPLE_RATES; i++) { |
| out->supported_sample_rates[i] = 0; |
| } |
| } |
| |
| /* must be called with hw device mutex locked */ |
| static int read_hdmi_sink_caps(struct stream_out *out) |
| { |
| int ret = 0, i = 0, j = 0; |
| int channels = platform_edid_get_max_channels(out->dev->platform); |
| |
| reset_hdmi_sink_caps(out); |
| |
| /* Cache ext disp type */ |
| if (platform_get_ext_disp_type(adev->platform) <= 0) { |
| ALOGE("%s: Failed to query disp type, ret:%d", __func__, ret); |
| return -EINVAL; |
| } |
| |
| switch (channels) { |
| case 8: |
| ALOGV("%s: HDMI supports 7.1 channels", __func__); |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_7POINT1; |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_6POINT1; |
| case 6: |
| ALOGV("%s: HDMI supports 5.1 channels", __func__); |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_5POINT1; |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_PENTA; |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_QUAD; |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_SURROUND; |
| out->supported_channel_masks[i++] = AUDIO_CHANNEL_OUT_2POINT1; |
| break; |
| default: |
| ALOGE("invalid/nonstandard channal count[%d]",channels); |
| ret = -ENOSYS; |
| break; |
| } |
| |
| // check channel format caps |
| i = 0; |
| if (platform_is_edid_supported_format(out->dev->platform, AUDIO_FORMAT_AC3)) { |
| ALOGV(":%s HDMI supports AC3/EAC3 formats", __func__); |
| out->supported_formats[i++] = AUDIO_FORMAT_AC3; |
| //Adding EAC3/EAC3_JOC formats if AC3 is supported by the sink. |
| //EAC3/EAC3_JOC will be converted to AC3 for decoding if needed |
| out->supported_formats[i++] = AUDIO_FORMAT_E_AC3; |
| out->supported_formats[i++] = AUDIO_FORMAT_E_AC3_JOC; |
| } |
| |
| if (platform_is_edid_supported_format(out->dev->platform, AUDIO_FORMAT_DTS)) { |
| ALOGV(":%s HDMI supports DTS format", __func__); |
| out->supported_formats[i++] = AUDIO_FORMAT_DTS; |
| } |
| |
| if (platform_is_edid_supported_format(out->dev->platform, AUDIO_FORMAT_DTS_HD)) { |
| ALOGV(":%s HDMI supports DTS HD format", __func__); |
| out->supported_formats[i++] = AUDIO_FORMAT_DTS_HD; |
| } |
| |
| |
| // check sample rate caps |
| i = 0; |
| for (j = 0; j < MAX_SUPPORTED_SAMPLE_RATES; j++) { |
| if (platform_is_edid_supported_sample_rate(out->dev->platform, out_hdmi_sample_rates[j])) { |
| ALOGV(":%s HDMI supports sample rate:%d", __func__, out_hdmi_sample_rates[j]); |
| out->supported_sample_rates[i++] = out_hdmi_sample_rates[j]; |
| } |
| } |
| |
| return ret; |
| } |
| |
| audio_usecase_t get_usecase_id_from_usecase_type(const struct audio_device *adev, |
| usecase_type_t type) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == type) { |
| ALOGV("%s: usecase id %d", __func__, usecase->id); |
| return usecase->id; |
| } |
| } |
| return USECASE_INVALID; |
| } |
| |
| struct audio_usecase *get_usecase_from_list(const struct audio_device *adev, |
| audio_usecase_t uc_id) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->id == uc_id) |
| return usecase; |
| } |
| return NULL; |
| } |
| |
| struct stream_in *get_next_active_input(const struct audio_device *adev) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each_reverse(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_CAPTURE) |
| return usecase->stream.in; |
| } |
| return NULL; |
| } |
| |
| /* |
| * is a true native playback active |
| */ |
| bool audio_is_true_native_stream_active(struct audio_device *adev) |
| { |
| bool active = false; |
| int i = 0; |
| struct listnode *node; |
| |
| if (NATIVE_AUDIO_MODE_TRUE_44_1 != platform_get_native_support()) { |
| ALOGV("%s:napb: not in true mode or non hdphones device", |
| __func__); |
| active = false; |
| goto exit; |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| struct audio_usecase *uc; |
| uc = node_to_item(node, struct audio_usecase, list); |
| struct stream_out *curr_out = |
| (struct stream_out*) uc->stream.out; |
| |
| if (curr_out && PCM_PLAYBACK == uc->type) { |
| ALOGD("%s:napb: (%d) (%s)id (%d) sr %d bw " |
| "(%d) device %s", __func__, i++, use_case_table[uc->id], |
| uc->id, curr_out->sample_rate, |
| curr_out->bit_width, |
| platform_get_snd_device_name(uc->out_snd_device)); |
| |
| if (is_offload_usecase(uc->id) && |
| (curr_out->sample_rate == OUTPUT_SAMPLING_RATE_44100)) { |
| active = true; |
| ALOGD("%s:napb:native stream detected", __func__); |
| } |
| } |
| } |
| exit: |
| return active; |
| } |
| |
| /* |
| * if native DSD playback active |
| */ |
| bool audio_is_dsd_native_stream_active(struct audio_device *adev) |
| { |
| bool active = false; |
| struct listnode *node = NULL; |
| struct audio_usecase *uc = NULL; |
| struct stream_out *curr_out = NULL; |
| |
| list_for_each(node, &adev->usecase_list) { |
| uc = node_to_item(node, struct audio_usecase, list); |
| curr_out = (struct stream_out*) uc->stream.out; |
| |
| if (curr_out && PCM_PLAYBACK == uc->type && |
| (DSD_NATIVE_BACKEND == platform_get_backend_index(uc->out_snd_device))) { |
| active = true; |
| ALOGV("%s:DSD playback is active", __func__); |
| break; |
| } |
| } |
| return active; |
| } |
| |
| static bool force_device_switch(struct audio_usecase *usecase) |
| { |
| bool ret = false; |
| bool is_it_true_mode = false; |
| |
| if (is_offload_usecase(usecase->id) && |
| (usecase->stream.out) && |
| (usecase->stream.out->sample_rate == OUTPUT_SAMPLING_RATE_44100) && |
| (usecase->stream.out->devices == AUDIO_DEVICE_OUT_WIRED_HEADSET || |
| usecase->stream.out->devices == AUDIO_DEVICE_OUT_WIRED_HEADPHONE)) { |
| is_it_true_mode = (NATIVE_AUDIO_MODE_TRUE_44_1 == platform_get_native_support()? true : false); |
| if ((is_it_true_mode && !adev->native_playback_enabled) || |
| (!is_it_true_mode && adev->native_playback_enabled)){ |
| ret = true; |
| ALOGD("napb: time to toggle native mode"); |
| } |
| } |
| |
| // Force all a2dp output devices to reconfigure for proper AFE encode format |
| //Also handle a case where in earlier a2dp start failed as A2DP stream was |
| //in suspended state, hence try to trigger a retry when we again get a routing request. |
| if((usecase->stream.out) && |
| (usecase->stream.out->devices & AUDIO_DEVICE_OUT_ALL_A2DP) && |
| audio_extn_a2dp_is_force_device_switch()) { |
| ALOGD("Force a2dp device switch to update new encoder config"); |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| int select_devices(struct audio_device *adev, audio_usecase_t uc_id) |
| { |
| snd_device_t out_snd_device = SND_DEVICE_NONE; |
| snd_device_t in_snd_device = SND_DEVICE_NONE; |
| struct audio_usecase *usecase = NULL; |
| struct audio_usecase *vc_usecase = NULL; |
| struct audio_usecase *voip_usecase = NULL; |
| struct audio_usecase *hfp_usecase = NULL; |
| audio_usecase_t hfp_ucid; |
| int status = 0; |
| |
| ALOGD("%s for use case (%s)", __func__, use_case_table[uc_id]); |
| |
| usecase = get_usecase_from_list(adev, uc_id); |
| if (usecase == NULL) { |
| ALOGE("%s: Could not find the usecase(%d)", __func__, uc_id); |
| return -EINVAL; |
| } |
| |
| if ((usecase->type == VOICE_CALL) || |
| (usecase->type == VOIP_CALL) || |
| (usecase->type == PCM_HFP_CALL)) { |
| if(usecase->stream.out == NULL) { |
| ALOGE("%s: stream.out is NULL", __func__); |
| return -EINVAL; |
| } |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out); |
| in_snd_device = platform_get_input_snd_device(adev->platform, usecase->stream.out->devices); |
| usecase->devices = usecase->stream.out->devices; |
| } else { |
| /* |
| * If the voice call is active, use the sound devices of voice call usecase |
| * so that it would not result any device switch. All the usecases will |
| * be switched to new device when select_devices() is called for voice call |
| * usecase. This is to avoid switching devices for voice call when |
| * check_usecases_codec_backend() is called below. |
| * choose voice call device only if the use case device is |
| * also using the codec backend |
| */ |
| if (voice_is_in_call(adev) && adev->mode != AUDIO_MODE_NORMAL) { |
| vc_usecase = get_usecase_from_list(adev, |
| get_usecase_id_from_usecase_type(adev, VOICE_CALL)); |
| if ((vc_usecase) && (((vc_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && |
| (usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND)) || |
| ((vc_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && |
| (usecase->devices & AUDIO_DEVICE_IN_ALL_CODEC_BACKEND)) || |
| (usecase->devices == AUDIO_DEVICE_IN_VOICE_CALL))) { |
| in_snd_device = vc_usecase->in_snd_device; |
| out_snd_device = vc_usecase->out_snd_device; |
| } |
| } else if (voice_extn_compress_voip_is_active(adev)) { |
| bool out_snd_device_backend_match = true; |
| voip_usecase = get_usecase_from_list(adev, USECASE_COMPRESS_VOIP_CALL); |
| if (usecase->stream.out != NULL) { |
| out_snd_device_backend_match = platform_check_backends_match( |
| voip_usecase->out_snd_device, |
| platform_get_output_snd_device( |
| adev->platform, |
| usecase->stream.out)); |
| } |
| if ((voip_usecase) && ((voip_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && |
| ((usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) || |
| ((usecase->devices & ~AUDIO_DEVICE_BIT_IN) & AUDIO_DEVICE_IN_ALL_CODEC_BACKEND)) && |
| out_snd_device_backend_match && |
| (voip_usecase->stream.out != adev->primary_output))) { |
| in_snd_device = voip_usecase->in_snd_device; |
| out_snd_device = voip_usecase->out_snd_device; |
| } |
| } else if (audio_extn_hfp_is_active(adev)) { |
| hfp_ucid = audio_extn_hfp_get_usecase(); |
| hfp_usecase = get_usecase_from_list(adev, hfp_ucid); |
| if ((hfp_usecase) && (hfp_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND)) { |
| in_snd_device = hfp_usecase->in_snd_device; |
| out_snd_device = hfp_usecase->out_snd_device; |
| } |
| } |
| if (usecase->type == PCM_PLAYBACK) { |
| if (usecase->stream.out == NULL) { |
| ALOGE("%s: stream.out is NULL", __func__); |
| return -EINVAL; |
| } |
| usecase->devices = usecase->stream.out->devices; |
| in_snd_device = SND_DEVICE_NONE; |
| if (out_snd_device == SND_DEVICE_NONE) { |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out); |
| if (usecase->stream.out == adev->primary_output && |
| adev->active_input && |
| out_snd_device != usecase->out_snd_device) { |
| select_devices(adev, adev->active_input->usecase); |
| } |
| } |
| } else if (usecase->type == PCM_CAPTURE) { |
| if (usecase->stream.in == NULL) { |
| ALOGE("%s: stream.in is NULL", __func__); |
| return -EINVAL; |
| } |
| usecase->devices = usecase->stream.in->device; |
| out_snd_device = SND_DEVICE_NONE; |
| if (in_snd_device == SND_DEVICE_NONE) { |
| audio_devices_t out_device = AUDIO_DEVICE_NONE; |
| if (adev->active_input && |
| (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION || |
| (adev->mode == AUDIO_MODE_IN_COMMUNICATION && |
| adev->active_input->source == AUDIO_SOURCE_MIC)) && |
| adev->primary_output && !adev->primary_output->standby) { |
| out_device = adev->primary_output->devices; |
| platform_set_echo_reference(adev, false, AUDIO_DEVICE_NONE); |
| } else if (usecase->id == USECASE_AUDIO_RECORD_AFE_PROXY) { |
| out_device = AUDIO_DEVICE_OUT_TELEPHONY_TX; |
| } |
| in_snd_device = platform_get_input_snd_device(adev->platform, out_device); |
| } |
| } |
| } |
| |
| if (out_snd_device == usecase->out_snd_device && |
| in_snd_device == usecase->in_snd_device) { |
| |
| if (!force_device_switch(usecase)) |
| return 0; |
| } |
| |
| ALOGD("%s: out_snd_device(%d: %s) in_snd_device(%d: %s)", __func__, |
| out_snd_device, platform_get_snd_device_name(out_snd_device), |
| in_snd_device, platform_get_snd_device_name(in_snd_device)); |
| |
| /* |
| * Limitation: While in call, to do a device switch we need to disable |
| * and enable both RX and TX devices though one of them is same as current |
| * device. |
| */ |
| if ((usecase->type == VOICE_CALL) && |
| (usecase->in_snd_device != SND_DEVICE_NONE) && |
| (usecase->out_snd_device != SND_DEVICE_NONE)) { |
| status = platform_switch_voice_call_device_pre(adev->platform); |
| } |
| |
| if (((usecase->type == VOICE_CALL) || |
| (usecase->type == VOIP_CALL)) && |
| (usecase->out_snd_device != SND_DEVICE_NONE)) { |
| /* Disable sidetone only if voice/voip call already exists */ |
| if (voice_is_call_state_active(adev) || |
| voice_extn_compress_voip_is_started(adev)) |
| voice_set_sidetone(adev, usecase->out_snd_device, false); |
| |
| /* Disable aanc only if voice call exists */ |
| if (voice_is_call_state_active(adev)) |
| voice_check_and_update_aanc_path(adev, usecase->out_snd_device, false); |
| } |
| |
| /* Disable current sound devices */ |
| if (usecase->out_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase); |
| disable_snd_device(adev, usecase->out_snd_device); |
| } |
| |
| if (usecase->in_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase); |
| disable_snd_device(adev, usecase->in_snd_device); |
| } |
| |
| /* Applicable only on the targets that has external modem. |
| * New device information should be sent to modem before enabling |
| * the devices to reduce in-call device switch time. |
| */ |
| if ((usecase->type == VOICE_CALL) && |
| (usecase->in_snd_device != SND_DEVICE_NONE) && |
| (usecase->out_snd_device != SND_DEVICE_NONE)) { |
| status = platform_switch_voice_call_enable_device_config(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| } |
| |
| /* Enable new sound devices */ |
| if (out_snd_device != SND_DEVICE_NONE) { |
| check_usecases_codec_backend(adev, usecase, out_snd_device); |
| if (platform_check_codec_asrc_support(adev->platform)) |
| check_and_set_asrc_mode(adev, usecase, out_snd_device); |
| enable_snd_device(adev, out_snd_device); |
| } |
| |
| if (in_snd_device != SND_DEVICE_NONE) { |
| check_usecases_capture_codec_backend(adev, usecase, in_snd_device); |
| enable_snd_device(adev, in_snd_device); |
| } |
| |
| if (usecase->type == VOICE_CALL || usecase->type == VOIP_CALL) { |
| status = platform_switch_voice_call_device_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| enable_audio_route_for_voice_usecases(adev, usecase); |
| } |
| |
| usecase->in_snd_device = in_snd_device; |
| usecase->out_snd_device = out_snd_device; |
| |
| audio_extn_utils_update_stream_app_type_cfg_for_usecase(adev, |
| usecase); |
| if (usecase->type == PCM_PLAYBACK) { |
| if ((24 == usecase->stream.out->bit_width) && |
| (usecase->stream.out->devices & AUDIO_DEVICE_OUT_SPEAKER)) { |
| usecase->stream.out->app_type_cfg.sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| } else if ((out_snd_device == SND_DEVICE_OUT_HDMI || |
| out_snd_device == SND_DEVICE_OUT_USB_HEADSET || |
| out_snd_device == SND_DEVICE_OUT_DISPLAY_PORT) && |
| (usecase->stream.out->sample_rate >= OUTPUT_SAMPLING_RATE_44100)) { |
| /* |
| * To best utlize DSP, check if the stream sample rate is supported/multiple of |
| * configured device sample rate, if not update the COPP rate to be equal to the |
| * device sample rate, else open COPP at stream sample rate |
| */ |
| platform_check_and_update_copp_sample_rate(adev->platform, out_snd_device, |
| usecase->stream.out->sample_rate, |
| &usecase->stream.out->app_type_cfg.sample_rate); |
| } else if (((out_snd_device != SND_DEVICE_OUT_HEADPHONES_44_1 && |
| !audio_is_true_native_stream_active(adev)) && |
| usecase->stream.out->sample_rate == OUTPUT_SAMPLING_RATE_44100) || |
| (usecase->stream.out->sample_rate < OUTPUT_SAMPLING_RATE_44100)) { |
| usecase->stream.out->app_type_cfg.sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| } |
| |
| /* Notify device change info to effect clients registered */ |
| pthread_mutex_unlock(&adev->lock); |
| audio_extn_gef_notify_device_config( |
| usecase->stream.out->devices, |
| usecase->stream.out->channel_mask, |
| usecase->stream.out->app_type_cfg.sample_rate, |
| platform_get_snd_device_acdb_id(usecase->out_snd_device)); |
| pthread_mutex_lock(&adev->lock); |
| } |
| enable_audio_route(adev, usecase); |
| |
| if (usecase->type == VOICE_CALL || usecase->type == VOIP_CALL) { |
| /* Enable aanc only if voice call exists */ |
| if (voice_is_call_state_active(adev)) |
| voice_check_and_update_aanc_path(adev, out_snd_device, true); |
| |
| /* Enable sidetone only if other voice/voip call already exists */ |
| if (voice_is_call_state_active(adev) || |
| voice_extn_compress_voip_is_started(adev)) |
| voice_set_sidetone(adev, out_snd_device, true); |
| } |
| |
| /* Applicable only on the targets that has external modem. |
| * Enable device command should be sent to modem only after |
| * enabling voice call mixer controls |
| */ |
| if (usecase->type == VOICE_CALL) |
| status = platform_switch_voice_call_usecase_route_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| ALOGD("%s: done",__func__); |
| |
| return status; |
| } |
| |
| static int stop_input_stream(struct stream_in *in) |
| { |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| in->usecase, use_case_table[in->usecase]); |
| uc_info = get_usecase_from_list(adev, in->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, in->usecase); |
| return -EINVAL; |
| } |
| |
| /* Close in-call recording streams */ |
| voice_check_and_stop_incall_rec_usecase(adev, in); |
| |
| /* 1. Disable stream specific mixer controls */ |
| disable_audio_route(adev, uc_info); |
| |
| /* 2. Disable the tx device */ |
| disable_snd_device(adev, uc_info->in_snd_device); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| adev->active_input = get_next_active_input(adev); |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_input_stream(struct stream_in *in) |
| { |
| /* 1. Enable output device and stream routing controls */ |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| int snd_card_status = get_snd_card_state(adev); |
| |
| int usecase = platform_update_usecase_from_source(in->source,in->usecase); |
| if (get_usecase_from_list(adev, usecase) == NULL) |
| in->usecase = usecase; |
| ALOGD("%s: enter: stream(%p)usecase(%d: %s)", |
| __func__, &in->stream, in->usecase, use_case_table[in->usecase]); |
| |
| |
| if (SND_CARD_STATE_OFFLINE == snd_card_status) { |
| ALOGE("%s: sound card is not active/SSR returning error", __func__); |
| ret = -EIO; |
| goto error_config; |
| } |
| |
| /* Check if source matches incall recording usecase criteria */ |
| ret = voice_check_and_set_incall_rec_usecase(adev, in); |
| if (ret) |
| goto error_config; |
| else |
| ALOGV("%s: usecase(%d)", __func__, in->usecase); |
| |
| if (get_usecase_from_list(adev, in->usecase) != NULL) { |
| ALOGE("%s: use case assigned already in use, stream(%p)usecase(%d: %s)", |
| __func__, &in->stream, in->usecase, use_case_table[in->usecase]); |
| return -EINVAL; |
| } |
| |
| in->pcm_device_id = platform_get_pcm_device_id(in->usecase, PCM_CAPTURE); |
| if (in->pcm_device_id < 0) { |
| ALOGE("%s: Could not find PCM device id for the usecase(%d)", |
| __func__, in->usecase); |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| adev->active_input = in; |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| |
| if (!uc_info) { |
| ret = -ENOMEM; |
| goto error_config; |
| } |
| |
| uc_info->id = in->usecase; |
| uc_info->type = PCM_CAPTURE; |
| uc_info->stream.in = in; |
| uc_info->devices = in->device; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| audio_extn_perf_lock_acquire(&adev->perf_lock_handle, 0, |
| adev->perf_lock_opts, |
| adev->perf_lock_opts_size); |
| select_devices(adev, in->usecase); |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d), channels %d format %d", |
| __func__, adev->snd_card, in->pcm_device_id, in->config.channels, in->config.format); |
| |
| if (audio_extn_cin_attached_usecase(in->usecase)) { |
| ret = audio_extn_cin_start_input_stream(in); |
| if (ret) |
| goto error_open; |
| else |
| goto done_open; |
| } |
| |
| unsigned int flags = PCM_IN; |
| unsigned int pcm_open_retry_count = 0; |
| |
| if (in->usecase == USECASE_AUDIO_RECORD_AFE_PROXY) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| pcm_open_retry_count = PROXY_OPEN_RETRY_COUNT; |
| } else if (in->realtime) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| } |
| |
| while (1) { |
| in->pcm = pcm_open(adev->snd_card, in->pcm_device_id, |
| flags, &in->config); |
| if (in->pcm == NULL || !pcm_is_ready(in->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(in->pcm)); |
| if (in->pcm != NULL) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| if (pcm_open_retry_count-- == 0) { |
| ret = -EIO; |
| goto error_open; |
| } |
| usleep(PROXY_OPEN_WAIT_TIME * 1000); |
| continue; |
| } |
| break; |
| } |
| |
| ALOGV("%s: pcm_prepare", __func__); |
| ret = pcm_prepare(in->pcm); |
| if (ret < 0) { |
| ALOGE("%s: pcm_prepare returned %d", __func__, ret); |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| goto error_open; |
| } |
| |
| register_in_stream(in); |
| if (in->realtime) { |
| ret = pcm_start(in->pcm); |
| if (ret < 0) |
| goto error_open; |
| } |
| |
| done_open: |
| audio_extn_perf_lock_release(&adev->perf_lock_handle); |
| ALOGD("%s: exit", __func__); |
| |
| return ret; |
| |
| error_open: |
| audio_extn_perf_lock_release(&adev->perf_lock_handle); |
| stop_input_stream(in); |
| error_config: |
| adev->active_input = get_next_active_input(adev); |
| /* |
| * sleep 50ms to allow sufficient time for kernel |
| * drivers to recover incases like SSR. |
| */ |
| usleep(50000); |
| ALOGD("%s: exit: status(%d)", __func__, ret); |
| |
| return ret; |
| } |
| |
| void lock_input_stream(struct stream_in *in) |
| { |
| pthread_mutex_lock(&in->pre_lock); |
| pthread_mutex_lock(&in->lock); |
| pthread_mutex_unlock(&in->pre_lock); |
| } |
| |
| void lock_output_stream(struct stream_out *out) |
| { |
| pthread_mutex_lock(&out->pre_lock); |
| pthread_mutex_lock(&out->lock); |
| pthread_mutex_unlock(&out->pre_lock); |
| } |
| |
| /* must be called with out->lock locked */ |
| static int send_offload_cmd_l(struct stream_out* out, int command) |
| { |
| struct offload_cmd *cmd = (struct offload_cmd *)calloc(1, sizeof(struct offload_cmd)); |
| |
| if (!cmd) { |
| ALOGE("failed to allocate mem for command 0x%x", command); |
| return -ENOMEM; |
| } |
| |
| ALOGVV("%s %d", __func__, command); |
| |
| cmd->cmd = command; |
| list_add_tail(&out->offload_cmd_list, &cmd->node); |
| pthread_cond_signal(&out->offload_cond); |
| return 0; |
| } |
| |
| /* must be called iwth out->lock locked */ |
| static void stop_compressed_output_l(struct stream_out *out) |
| { |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| out->send_new_metadata = 1; |
| if (out->compr != NULL) { |
| compress_stop(out->compr); |
| while (out->offload_thread_blocked) { |
| pthread_cond_wait(&out->cond, &out->lock); |
| } |
| } |
| } |
| |
| bool is_offload_usecase(audio_usecase_t uc_id) |
| { |
| unsigned int i; |
| for (i = 0; i < sizeof(offload_usecases)/sizeof(offload_usecases[0]); i++) { |
| if (uc_id == offload_usecases[i]) |
| return true; |
| } |
| return false; |
| } |
| |
| static audio_usecase_t get_offload_usecase(struct audio_device *adev, bool is_compress) |
| { |
| audio_usecase_t ret_uc = USECASE_INVALID; |
| unsigned int offload_uc_index; |
| unsigned int num_usecase = sizeof(offload_usecases)/sizeof(offload_usecases[0]); |
| if (!adev->multi_offload_enable) { |
| if (!is_compress) |
| ret_uc = USECASE_AUDIO_PLAYBACK_OFFLOAD2; |
| else |
| ret_uc = USECASE_AUDIO_PLAYBACK_OFFLOAD; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (get_usecase_from_list(adev, ret_uc) != NULL) |
| ret_uc = USECASE_INVALID; |
| pthread_mutex_unlock(&adev->lock); |
| |
| return ret_uc; |
| } |
| |
| ALOGV("%s: num_usecase: %d", __func__, num_usecase); |
| for (offload_uc_index = 0; offload_uc_index < num_usecase; offload_uc_index++) { |
| if (!(adev->offload_usecases_state & (0x1 << offload_uc_index))) { |
| adev->offload_usecases_state |= 0x1 << offload_uc_index; |
| ret_uc = offload_usecases[offload_uc_index]; |
| break; |
| } |
| } |
| |
| ALOGV("%s: offload usecase is %d", __func__, ret_uc); |
| return ret_uc; |
| } |
| |
| static void free_offload_usecase(struct audio_device *adev, |
| audio_usecase_t uc_id) |
| { |
| unsigned int offload_uc_index; |
| unsigned int num_usecase = sizeof(offload_usecases)/sizeof(offload_usecases[0]); |
| |
| if (!adev->multi_offload_enable) |
| return; |
| |
| for (offload_uc_index = 0; offload_uc_index < num_usecase; offload_uc_index++) { |
| if (offload_usecases[offload_uc_index] == uc_id) { |
| adev->offload_usecases_state &= ~(0x1 << offload_uc_index); |
| break; |
| } |
| } |
| ALOGV("%s: free offload usecase %d", __func__, uc_id); |
| } |
| |
| static void *offload_thread_loop(void *context) |
| { |
| struct stream_out *out = (struct stream_out *) context; |
| struct listnode *item; |
| int ret = 0; |
| |
| setpriority(PRIO_PROCESS, 0, ANDROID_PRIORITY_AUDIO); |
| set_sched_policy(0, SP_FOREGROUND); |
| prctl(PR_SET_NAME, (unsigned long)"Offload Callback", 0, 0, 0); |
| |
| ALOGV("%s", __func__); |
| lock_output_stream(out); |
| for (;;) { |
| struct offload_cmd *cmd = NULL; |
| stream_callback_event_t event; |
| bool send_callback = false; |
| |
| ALOGVV("%s offload_cmd_list %d out->offload_state %d", |
| __func__, list_empty(&out->offload_cmd_list), |
| out->offload_state); |
| if (list_empty(&out->offload_cmd_list)) { |
| ALOGV("%s SLEEPING", __func__); |
| pthread_cond_wait(&out->offload_cond, &out->lock); |
| ALOGV("%s RUNNING", __func__); |
| continue; |
| } |
| |
| item = list_head(&out->offload_cmd_list); |
| cmd = node_to_item(item, struct offload_cmd, node); |
| list_remove(item); |
| |
| ALOGVV("%s STATE %d CMD %d out->compr %p", |
| __func__, out->offload_state, cmd->cmd, out->compr); |
| |
| if (cmd->cmd == OFFLOAD_CMD_EXIT) { |
| free(cmd); |
| break; |
| } |
| |
| if (out->compr == NULL) { |
| ALOGE("%s: Compress handle is NULL", __func__); |
| free(cmd); |
| pthread_cond_signal(&out->cond); |
| continue; |
| } |
| out->offload_thread_blocked = true; |
| pthread_mutex_unlock(&out->lock); |
| send_callback = false; |
| switch(cmd->cmd) { |
| case OFFLOAD_CMD_WAIT_FOR_BUFFER: |
| ALOGD("copl(%p):calling compress_wait", out); |
| compress_wait(out->compr, -1); |
| ALOGD("copl(%p):out of compress_wait", out); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_WRITE_READY; |
| break; |
| case OFFLOAD_CMD_PARTIAL_DRAIN: |
| ret = compress_next_track(out->compr); |
| if(ret == 0) { |
| ALOGD("copl(%p):calling compress_partial_drain", out); |
| ret = compress_partial_drain(out->compr); |
| ALOGD("copl(%p):out of compress_partial_drain", out); |
| if (ret < 0) |
| ret = -errno; |
| } |
| else if (ret == -ETIMEDOUT) |
| compress_drain(out->compr); |
| else |
| ALOGE("%s: Next track returned error %d",__func__, ret); |
| if (ret != -ENETRESET) { |
| send_callback = true; |
| pthread_mutex_lock(&out->lock); |
| out->send_new_metadata = 1; |
| out->send_next_track_params = true; |
| pthread_mutex_unlock(&out->lock); |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| ALOGV("copl(%p):send drain callback, ret %d", out, ret); |
| } else |
| ALOGE("%s: Block drain ready event during SSR", __func__); |
| break; |
| case OFFLOAD_CMD_DRAIN: |
| ALOGD("copl(%p):calling compress_drain", out); |
| compress_drain(out->compr); |
| ALOGD("copl(%p):calling compress_drain", out); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| break; |
| default: |
| ALOGE("%s unknown command received: %d", __func__, cmd->cmd); |
| break; |
| } |
| lock_output_stream(out); |
| out->offload_thread_blocked = false; |
| pthread_cond_signal(&out->cond); |
| if (send_callback && out->offload_callback) { |
| ALOGVV("%s: sending offload_callback event %d", __func__, event); |
| out->offload_callback(event, NULL, out->offload_cookie); |
| } |
| free(cmd); |
| } |
| |
| pthread_cond_signal(&out->cond); |
| while (!list_empty(&out->offload_cmd_list)) { |
| item = list_head(&out->offload_cmd_list); |
| list_remove(item); |
| free(node_to_item(item, struct offload_cmd, node)); |
| } |
| pthread_mutex_unlock(&out->lock); |
| |
| return NULL; |
| } |
| |
| static int create_offload_callback_thread(struct stream_out *out) |
| { |
| pthread_cond_init(&out->offload_cond, (const pthread_condattr_t *) NULL); |
| list_init(&out->offload_cmd_list); |
| pthread_create(&out->offload_thread, (const pthread_attr_t *) NULL, |
| offload_thread_loop, out); |
| return 0; |
| } |
| |
| static int destroy_offload_callback_thread(struct stream_out *out) |
| { |
| lock_output_stream(out); |
| stop_compressed_output_l(out); |
| send_offload_cmd_l(out, OFFLOAD_CMD_EXIT); |
| |
| pthread_mutex_unlock(&out->lock); |
| pthread_join(out->offload_thread, (void **) NULL); |
| pthread_cond_destroy(&out->offload_cond); |
| |
| return 0; |
| } |
| |
| static int stop_output_stream(struct stream_out *out) |
| { |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| out->usecase, use_case_table[out->usecase]); |
| uc_info = get_usecase_from_list(adev, out->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, out->usecase); |
| return -EINVAL; |
| } |
| |
| if (is_offload_usecase(out->usecase) && |
| !(audio_extn_passthru_is_passthrough_stream(out))) { |
| if (adev->visualizer_stop_output != NULL) |
| adev->visualizer_stop_output(out->handle, out->pcm_device_id); |
| |
| audio_extn_dts_remove_state_notifier_node(out->usecase); |
| |
| if (adev->offload_effects_stop_output != NULL) |
| adev->offload_effects_stop_output(out->handle, out->pcm_device_id); |
| } |
| |
| /* 1. Get and set stream specific mixer controls */ |
| disable_audio_route(adev, uc_info); |
| |
| /* 2. Disable the rx device */ |
| disable_snd_device(adev, uc_info->out_snd_device); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| if (is_offload_usecase(out->usecase) && |
| (audio_extn_passthru_is_passthrough_stream(out))) { |
| ALOGV("Disable passthrough , reset mixer to pcm"); |
| /* NO_PASSTHROUGH */ |
| out->compr_config.codec->compr_passthr = 0; |
| audio_extn_passthru_on_stop(out); |
| audio_extn_dolby_set_dap_bypass(adev, DAP_STATE_ON); |
| } |
| |
| /* Must be called after removing the usecase from list */ |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) |
| audio_extn_keep_alive_start(); |
| |
| /*reset delay_param to 0*/ |
| out->delay_param.start_delay = 0; |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_output_stream(struct stream_out *out) |
| { |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| int snd_card_status = get_snd_card_state(adev); |
| char mixer_ctl_name[128]; |
| struct mixer_ctl *ctl = NULL; |
| char* perf_mode[] = {"ULL", "ULL_PP", "LL"}; |
| |
| if ((out->usecase < 0) || (out->usecase >= AUDIO_USECASE_MAX)) { |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| ALOGD("%s: enter: stream(%p)usecase(%d: %s) devices(%#x)", |
| __func__, &out->stream, out->usecase, use_case_table[out->usecase], |
| out->devices); |
| |
| if (SND_CARD_STATE_OFFLINE == snd_card_status) { |
| ALOGE("%s: sound card is not active/SSR returning error", __func__); |
| ret = -EIO; |
| goto error_config; |
| } |
| |
| if (out->devices & AUDIO_DEVICE_OUT_ALL_A2DP) { |
| if (!audio_extn_a2dp_is_ready()) { |
| if (out->devices & AUDIO_DEVICE_OUT_SPEAKER) { |
| //combo usecase just by pass a2dp |
| ALOGW("%s: A2DP profile is not ready, route it to speaker", __func__); |
| out->devices = AUDIO_DEVICE_OUT_SPEAKER; |
| } else { |
| ALOGE("%s: A2DP profile is not ready, return error", __func__); |
| ret = -EAGAIN; |
| goto error_config; |
| } |
| } |
| } |
| out->pcm_device_id = platform_get_pcm_device_id(out->usecase, PCM_PLAYBACK); |
| if (out->pcm_device_id < 0) { |
| ALOGE("%s: Invalid PCM device id(%d) for the usecase(%d)", |
| __func__, out->pcm_device_id, out->usecase); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| |
| if (!uc_info) { |
| ret = -ENOMEM; |
| goto error_config; |
| } |
| |
| uc_info->id = out->usecase; |
| uc_info->type = PCM_PLAYBACK; |
| uc_info->stream.out = out; |
| uc_info->devices = out->devices; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| |
| audio_extn_perf_lock_acquire(&adev->perf_lock_handle, 0, |
| adev->perf_lock_opts, |
| adev->perf_lock_opts_size); |
| |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| audio_extn_keep_alive_stop(); |
| if (audio_extn_passthru_is_enabled() && |
| audio_extn_passthru_is_passthrough_stream(out)) { |
| audio_extn_passthru_on_start(out); |
| audio_extn_passthru_update_stream_configuration(adev, out); |
| } |
| } |
| |
| select_devices(adev, out->usecase); |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d) format(%#x)", |
| __func__, adev->snd_card, out->pcm_device_id, out->config.format); |
| if (!is_offload_usecase(out->usecase)) { |
| unsigned int flags = PCM_OUT; |
| unsigned int pcm_open_retry_count = 0; |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_AFE_PROXY) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| pcm_open_retry_count = PROXY_OPEN_RETRY_COUNT; |
| } else if (out->realtime) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| } else |
| flags |= PCM_MONOTONIC; |
| |
| if ((adev->vr_audio_mode_enabled) && |
| (out->flags & AUDIO_OUTPUT_FLAG_RAW)) { |
| snprintf(mixer_ctl_name, sizeof(mixer_ctl_name), |
| "PCM_Dev %d Topology", out->pcm_device_id); |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| ALOGI("%s: Could not get ctl for mixer cmd might be ULL - %s", |
| __func__, mixer_ctl_name); |
| } else { |
| //if success use ULLPP |
| ALOGI("%s: mixer ctrl %s succeeded setting up ULL for %d", |
| __func__, mixer_ctl_name, out->pcm_device_id); |
| //There is a still a possibility that some sessions |
| // that request for FAST|RAW when 3D audio is active |
| //can go through ULLPP. Ideally we expects apps to |
| //listen to audio focus and stop concurrent playback |
| //Also, we will look for mode flag (voice_in_communication) |
| //before enabling the realtime flag. |
| mixer_ctl_set_enum_by_string(ctl, perf_mode[1]); |
| } |
| } |
| |
| while (1) { |
| out->pcm = pcm_open(adev->snd_card, out->pcm_device_id, |
| flags, &out->config); |
| if (out->pcm == NULL || !pcm_is_ready(out->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(out->pcm)); |
| if (out->pcm != NULL) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| if (pcm_open_retry_count-- == 0) { |
| ret = -EIO; |
| goto error_open; |
| } |
| usleep(PROXY_OPEN_WAIT_TIME * 1000); |
| continue; |
| } |
| break; |
| } |
| |
| platform_set_stream_channel_map(adev->platform, out->channel_mask, |
| out->pcm_device_id); |
| |
| ALOGV("%s: pcm_prepare", __func__); |
| if (pcm_is_ready(out->pcm)) { |
| ret = pcm_prepare(out->pcm); |
| if (ret < 0) { |
| ALOGE("%s: pcm_prepare returned %d", __func__, ret); |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| goto error_open; |
| } |
| } |
| platform_set_stream_channel_map(adev->platform, out->channel_mask, |
| out->pcm_device_id); |
| } else { |
| platform_set_stream_channel_map(adev->platform, out->channel_mask, |
| out->pcm_device_id); |
| out->pcm = NULL; |
| out->compr = compress_open(adev->snd_card, |
| out->pcm_device_id, |
| COMPRESS_IN, &out->compr_config); |
| if (out->compr && !is_compress_ready(out->compr)) { |
| ALOGE("%s: %s", __func__, compress_get_error(out->compr)); |
| compress_close(out->compr); |
| out->compr = NULL; |
| ret = -EIO; |
| goto error_open; |
| } |
| /* compress_open sends params of the track, so reset the flag here */ |
| out->is_compr_metadata_avail = false; |
| |
| if (out->offload_callback) |
| compress_nonblock(out->compr, out->non_blocking); |
| |
| /* Since small bufs uses blocking writes, a write will be blocked |
| for the default max poll time (20s) in the event of an SSR. |
| Reduce the poll time to observe and deal with SSR faster. |
| */ |
| if (!out->non_blocking) { |
| compress_set_max_poll_wait(out->compr, 1000); |
| } |
| |
| audio_extn_utils_compress_set_render_mode(out); |
| audio_extn_utils_compress_set_clk_rec_mode(uc_info); |
| /* set render window if it was set before compress_open() */ |
| if (out->render_window.render_ws != 0 && out->render_window.render_we != 0) |
| audio_extn_utils_compress_set_render_window(out, |
| &out->render_window); |
| audio_extn_utils_compress_set_start_delay(out, &out->delay_param); |
| |
| audio_extn_dts_create_state_notifier_node(out->usecase); |
| audio_extn_dts_notify_playback_state(out->usecase, 0, out->sample_rate, |
| popcount(out->channel_mask), |
| out->playback_started); |
| |
| #ifdef DS1_DOLBY_DDP_ENABLED |
| if (audio_extn_is_dolby_format(out->format)) |
| audio_extn_dolby_send_ddp_endp_params(adev); |
| #endif |
| if (!(audio_extn_passthru_is_passthrough_stream(out)) && |
| (out->sample_rate != 176400 && out->sample_rate <= 192000)) { |
| if (adev->visualizer_start_output != NULL) |
| adev->visualizer_start_output(out->handle, out->pcm_device_id); |
| if (adev->offload_effects_start_output != NULL) |
| adev->offload_effects_start_output(out->handle, out->pcm_device_id, adev->mixer); |
| audio_extn_check_and_set_dts_hpx_state(adev); |
| } |
| } |
| |
| if (ret == 0) { |
| register_out_stream(out); |
| if (out->realtime) { |
| ret = pcm_start(out->pcm); |
| if (ret < 0) |
| goto error_open; |
| } |
| } |
| |
| audio_extn_perf_lock_release(&adev->perf_lock_handle); |
| ALOGD("%s: exit", __func__); |
| |
| return ret; |
| error_open: |
| audio_extn_perf_lock_release(&adev->perf_lock_handle); |
| stop_output_stream(out); |
| error_config: |
| /* |
| * sleep 50ms to allow sufficient time for kernel |
| * drivers to recover incases like SSR. |
| */ |
| usleep(50000); |
| return ret; |
| } |
| |
| static int check_input_parameters(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count) |
| { |
| int ret = 0; |
| |
| if (((format != AUDIO_FORMAT_PCM_16_BIT) && (format != AUDIO_FORMAT_PCM_8_24_BIT) && |
| (format != AUDIO_FORMAT_PCM_24_BIT_PACKED) && (format != AUDIO_FORMAT_PCM_32_BIT) && |
| (format != AUDIO_FORMAT_PCM_FLOAT)) && |
| !voice_extn_compress_voip_is_format_supported(format) && |
| !audio_extn_compr_cap_format_supported(format)) ret = -EINVAL; |
| |
| switch (channel_count) { |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 6: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| switch (sample_rate) { |
| case 8000: |
| case 11025: |
| case 12000: |
| case 16000: |
| case 22050: |
| case 24000: |
| case 32000: |
| case 44100: |
| case 48000: |
| case 96000: |
| case 192000: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static size_t get_input_buffer_size(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count, |
| bool is_low_latency) |
| { |
| size_t size = 0; |
| |
| if (check_input_parameters(sample_rate, format, channel_count) != 0) |
| return 0; |
| |
| size = (sample_rate * AUDIO_CAPTURE_PERIOD_DURATION_MSEC) / 1000; |
| if (is_low_latency) |
| size = configured_low_latency_capture_period_size; |
| |
| size *= audio_bytes_per_sample(format) * channel_count; |
| |
| /* make sure the size is multiple of 32 bytes |
| * At 48 kHz mono 16-bit PCM: |
| * 5.000 ms = 240 frames = 15*16*1*2 = 480, a whole multiple of 32 (15) |
| * 3.333 ms = 160 frames = 10*16*1*2 = 320, a whole multiple of 32 (10) |
| */ |
| size += 0x1f; |
| size &= ~0x1f; |
| |
| return size; |
| } |
| |
| static size_t get_output_period_size(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count, |
| int duration /*in millisecs*/) |
| { |
| size_t size = 0; |
| uint32_t bytes_per_sample = audio_bytes_per_sample(format); |
| |
| if ((duration == 0) || (sample_rate == 0) || |
| (bytes_per_sample == 0) || (channel_count == 0)) { |
| ALOGW("Invalid config duration %d sr %d bps %d ch %d", duration, sample_rate, |
| bytes_per_sample, channel_count); |
| return -EINVAL; |
| } |
| |
| size = (sample_rate * |
| duration * |
| bytes_per_sample * |
| channel_count) / 1000; |
| /* |
| * To have same PCM samples for all channels, the buffer size requires to |
| * be multiple of (number of channels * bytes per sample) |
| * For writes to succeed, the buffer must be written at address which is multiple of 32 |
| */ |
| size = ALIGN(size, (bytes_per_sample * channel_count * 32)); |
| |
| return (size/(channel_count * bytes_per_sample)); |
| } |
| |
| static uint64_t get_actual_pcm_frames_rendered(struct stream_out *out) |
| { |
| uint64_t actual_frames_rendered = 0; |
| size_t kernel_buffer_size = out->compr_config.fragment_size * out->compr_config.fragments; |
| |
| /* This adjustment accounts for buffering after app processor. |
| * It is based on estimated DSP latency per use case, rather than exact. |
| */ |
| int64_t platform_latency = platform_render_latency(out->usecase) * |
| out->sample_rate / 1000000LL; |
| |
| /* not querying actual state of buffering in kernel as it would involve an ioctl call |
| * which then needs protection, this causes delay in TS query for pcm_offload usecase |
| * hence only estimate. |
| */ |
| int64_t signed_frames = out->written - kernel_buffer_size; |
| |
| signed_frames = signed_frames / (audio_bytes_per_sample(out->format) * popcount(out->channel_mask)) - platform_latency; |
| |
| if (signed_frames > 0) |
| actual_frames_rendered = signed_frames; |
| |
| ALOGVV("%s signed frames %lld out_written %lld kernel_buffer_size %d" |
| "bytes/sample %zu channel count %d", __func__,(long long int)signed_frames, |
| (long long int)out->written, (int)kernel_buffer_size, |
| audio_bytes_per_sample(out->compr_config.codec->format), |
| popcount(out->channel_mask)); |
| |
| return actual_frames_rendered; |
| } |
| |
| static uint32_t out_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->sample_rate; |
| } |
| |
| static int out_set_sample_rate(struct audio_stream *stream __unused, |
| uint32_t rate __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t out_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) |
| return out->compr_config.fragment_size; |
| else if(out->usecase == USECASE_COMPRESS_VOIP_CALL) |
| return voice_extn_compress_voip_out_get_buffer_size(out); |
| else if (is_offload_usecase(out->usecase) && |
| out->flags == AUDIO_OUTPUT_FLAG_DIRECT) |
| return out->hal_fragment_size; |
| |
| return out->config.period_size * out->af_period_multiplier * |
| audio_stream_out_frame_size((const struct audio_stream_out *)stream); |
| } |
| |
| static uint32_t out_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->channel_mask; |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->format; |
| } |
| |
| static int out_set_format(struct audio_stream *stream __unused, |
| audio_format_t format __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int out_standby(struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| ALOGD("%s: enter: stream (%p) usecase(%d: %s)", __func__, |
| stream, out->usecase, use_case_table[out->usecase]); |
| |
| lock_output_stream(out); |
| if (!out->standby) { |
| if (adev->adm_deregister_stream) |
| adev->adm_deregister_stream(adev->adm_data, out->handle); |
| |
| if (is_offload_usecase(out->usecase)) |
| stop_compressed_output_l(out); |
| |
| pthread_mutex_lock(&adev->lock); |
| out->standby = true; |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| voice_extn_compress_voip_close_output_stream(stream); |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&out->lock); |
| ALOGD("VOIP output entered standby"); |
| return 0; |
| } else if (!is_offload_usecase(out->usecase)) { |
| if (out->pcm) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| } else { |
| ALOGD("copl(%p):standby", out); |
| out->send_next_track_params = false; |
| out->is_compr_metadata_avail = false; |
| out->gapless_mdata.encoder_delay = 0; |
| out->gapless_mdata.encoder_padding = 0; |
| if (out->compr != NULL) { |
| compress_close(out->compr); |
| out->compr = NULL; |
| } |
| } |
| stop_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&out->lock); |
| ALOGD("%s: exit", __func__); |
| return 0; |
| } |
| |
| static int out_dump(const struct audio_stream *stream __unused, |
| int fd __unused) |
| { |
| return 0; |
| } |
| |
| static int parse_compress_metadata(struct stream_out *out, struct str_parms *parms) |
| { |
| int ret = 0; |
| char value[32]; |
| |
| if (!out || !parms) { |
| ALOGE("%s: return invalid ",__func__); |
| return -EINVAL; |
| } |
| |
| ret = audio_extn_parse_compress_metadata(out, parms); |
| |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_DELAY_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| out->gapless_mdata.encoder_delay = atoi(value); //whats a good limit check? |
| } |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_PADDING_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| out->gapless_mdata.encoder_padding = atoi(value); |
| } |
| |
| ALOGV("%s new encoder delay %u and padding %u", __func__, |
| out->gapless_mdata.encoder_delay, out->gapless_mdata.encoder_padding); |
| |
| return 0; |
| } |
| |
| static bool output_drives_call(struct audio_device *adev, struct stream_out *out) |
| { |
| return out == adev->primary_output || out == adev->voice_tx_output; |
| } |
| |
| static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| struct str_parms *parms; |
| char value[32]; |
| int ret = 0, val = 0, err; |
| |
| ALOGD("%s: enter: usecase(%d: %s) kvpairs: %s", |
| __func__, out->usecase, use_case_table[out->usecase], kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| if (!parms) |
| goto error; |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| lock_output_stream(out); |
| pthread_mutex_lock(&adev->lock); |
| |
| /* |
| * When HDMI cable is unplugged the music playback is paused and |
| * the policy manager sends routing=0. But the audioflinger continues |
| * to write data until standby time (3sec). As the HDMI core is |
| * turned off, the write gets blocked. |
| * Avoid this by routing audio to speaker until standby. |
| */ |
| if ((out->devices == AUDIO_DEVICE_OUT_AUX_DIGITAL) && |
| (val == AUDIO_DEVICE_NONE) && |
| !audio_extn_passthru_is_passthrough_stream(out) && |
| (platform_get_edid_info(adev->platform) != 0) /* HDMI disconnected */) { |
| val = AUDIO_DEVICE_OUT_SPEAKER; |
| } |
| /* |
| * When A2DP is disconnected the |
| * music playback is paused and the policy manager sends routing=0 |
| * But the audioflingercontinues to write data until standby time |
| * (3sec). As BT is turned off, the write gets blocked. |
| * Avoid this by routing audio to speaker until standby. |
| */ |
| if ((out->devices & AUDIO_DEVICE_OUT_ALL_A2DP) && |
| (val == AUDIO_DEVICE_NONE)) { |
| val = AUDIO_DEVICE_OUT_SPEAKER; |
| } |
| /* To avoid a2dp to sco overlapping / BT device improper state |
| * check with BT lib about a2dp streaming support before routing |
| */ |
| if (val & AUDIO_DEVICE_OUT_ALL_A2DP) { |
| if (!audio_extn_a2dp_is_ready()) { |
| if (val & AUDIO_DEVICE_OUT_SPEAKER) { |
| //combo usecase just by pass a2dp |
| ALOGW("%s: A2DP profile is not ready,routing to speaker only", __func__); |
| val = AUDIO_DEVICE_OUT_SPEAKER; |
| } else { |
| ALOGE("%s: A2DP profile is not ready,ignoring routing request", __func__); |
| /* update device to a2dp and don't route as BT returned error |
| * However it is still possible a2dp routing called because |
| * of current active device disconnection (like wired headset) |
| */ |
| out->devices = val; |
| pthread_mutex_unlock(&out->lock); |
| pthread_mutex_unlock(&adev->lock); |
| goto error; |
| } |
| } |
| } |
| /* |
| * select_devices() call below switches all the usecases on the same |
| * backend to the new device. Refer to check_usecases_codec_backend() in |
| * the select_devices(). But how do we undo this? |
| * |
| * For example, music playback is active on headset (deep-buffer usecase) |
| * and if we go to ringtones and select a ringtone, low-latency usecase |
| * will be started on headset+speaker. As we can't enable headset+speaker |
| * and headset devices at the same time, select_devices() switches the music |
| * playback to headset+speaker while starting low-lateny usecase for ringtone. |
| * So when the ringtone playback is completed, how do we undo the same? |
| * |
| * We are relying on the out_set_parameters() call on deep-buffer output, |
| * once the ringtone playback is ended. |
| * NOTE: We should not check if the current devices are same as new devices. |
| * Because select_devices() must be called to switch back the music |
| * playback to headset. |
| */ |
| if (val != 0) { |
| audio_devices_t new_dev = val; |
| bool same_dev = out->devices == new_dev; |
| out->devices = new_dev; |
| |
| if (output_drives_call(adev, out)) { |
| if(!voice_is_in_call(adev)) { |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| adev->current_call_output = out; |
| ret = voice_start_call(adev); |
| } |
| } else { |
| adev->current_call_output = out; |
| voice_update_devices_for_all_voice_usecases(adev); |
| } |
| } |
| |
| if (!out->standby) { |
| if (!same_dev) { |
| ALOGV("update routing change"); |
| audio_extn_perf_lock_acquire(&adev->perf_lock_handle, 0, |
| adev->perf_lock_opts, |
| adev->perf_lock_opts_size); |
| if (adev->adm_on_routing_change) |
| adev->adm_on_routing_change(adev->adm_data, |
| out->handle); |
| } |
| select_devices(adev, out->usecase); |
| if (!same_dev) |
| audio_extn_perf_lock_release(&adev->perf_lock_handle); |
| } |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| if (out == adev->primary_output) { |
| pthread_mutex_lock(&adev->lock); |
| audio_extn_set_parameters(adev, parms); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| if (is_offload_usecase(out->usecase)) { |
| lock_output_stream(out); |
| parse_compress_metadata(out, parms); |
| |
| audio_extn_dts_create_state_notifier_node(out->usecase); |
| audio_extn_dts_notify_playback_state(out->usecase, 0, out->sample_rate, |
| popcount(out->channel_mask), |
| out->playback_started); |
| |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_PROFILE, value, sizeof(value)); |
| if (err >= 0) { |
| strlcpy(out->profile, value, sizeof(out->profile)); |
| ALOGV("updating stream profile with value '%s'", out->profile); |
| lock_output_stream(out); |
| audio_extn_utils_update_stream_output_app_type_cfg(adev->platform, |
| &adev->streams_output_cfg_list, |
| out->devices, out->flags, out->format, |
| out->sample_rate, out->bit_width, |
| out->channel_mask, out->profile, |
| &out->app_type_cfg); |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| str_parms_destroy(parms); |
| error: |
| ALOGV("%s: exit: code(%d)", __func__, ret); |
| return ret; |
| } |
| |
| static char* out_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str = (char*) NULL; |
| char value[256]; |
| struct str_parms *reply = str_parms_create(); |
| size_t i, j; |
| int ret; |
| bool first = true; |
| |
| if (!query || !reply) { |
| if (reply) { |
| str_parms_destroy(reply); |
| } |
| if (query) { |
| str_parms_destroy(query); |
| } |
| ALOGE("out_get_parameters: failed to allocate mem for query or reply"); |
| return NULL; |
| } |
| |
| ALOGV("%s: enter: keys - %s", __func__, keys); |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| while (out->supported_channel_masks[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_channels_name_to_enum_table); j++) { |
| if (out_channels_name_to_enum_table[j].value == out->supported_channel_masks[i]) { |
| if (!first) { |
| strlcat(value, "|", sizeof(value)); |
| } |
| strlcat(value, out_channels_name_to_enum_table[j].name, sizeof(value)); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value); |
| str = str_parms_to_str(reply); |
| } else { |
| voice_extn_out_get_parameters(out, query, reply); |
| str = str_parms_to_str(reply); |
| if (str && !strncmp(str, "", sizeof(""))) { |
| free(str); |
| str = strdup(keys); |
| } |
| } |
| |
| |
| ret = str_parms_get_str(query, "is_direct_pcm_track", value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| if (out->flags & AUDIO_OUTPUT_FLAG_DIRECT && |
| !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) { |
| ALOGV("in direct_pcm"); |
| strlcat(value, "true", sizeof(value )); |
| } else { |
| ALOGV("not in direct_pcm"); |
| strlcat(value, "false", sizeof(value)); |
| } |
| str_parms_add_str(reply, "is_direct_pcm_track", value); |
| if (str) |
| free(str); |
| str = str_parms_to_str(reply); |
| } |
| |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_FORMATS, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| first = true; |
| while (out->supported_formats[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_formats_name_to_enum_table); j++) { |
| if (out_formats_name_to_enum_table[j].value == out->supported_formats[i]) { |
| if (!first) { |
| strlcat(value, "|", sizeof(value)); |
| } |
| strlcat(value, out_formats_name_to_enum_table[j].name, sizeof(value)); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_FORMATS, value); |
| if (str) |
| free(str); |
| str = str_parms_to_str(reply); |
| } |
| |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| first = true; |
| while (out->supported_sample_rates[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_hdmi_sample_rates_name_to_enum_table); j++) { |
| if (out_hdmi_sample_rates_name_to_enum_table[j].value == out->supported_sample_rates[i]) { |
| if (!first) { |
| strlcat(value, "|", sizeof(value)); |
| } |
| strlcat(value, out_hdmi_sample_rates_name_to_enum_table[j].name, sizeof(value)); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES, value); |
| if (str) |
| free(str); |
| str = str_parms_to_str(reply); |
| } |
| |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static uint32_t out_get_latency(const struct audio_stream_out *stream) |
| { |
| uint32_t period_ms; |
| struct stream_out *out = (struct stream_out *)stream; |
| uint32_t latency = 0; |
| |
| if (is_offload_usecase(out->usecase)) { |
| lock_output_stream(out); |
| latency = audio_extn_utils_compress_get_dsp_latency(out); |
| pthread_mutex_unlock(&out->lock); |
| } else if (out->realtime) { |
| // since the buffer won't be filled up faster than realtime, |
| // return a smaller number |
| if (out->config.rate) |
| period_ms = (out->af_period_multiplier * out->config.period_size * |
| 1000) / (out->config.rate); |
| else |
| period_ms = 0; |
| latency = period_ms + platform_render_latency(out->usecase)/1000; |
| } else { |
| latency = (out->config.period_count * out->config.period_size * 1000) / |
| (out->config.rate); |
| } |
| |
| if ((AUDIO_DEVICE_OUT_BLUETOOTH_A2DP == out->devices) && |
| !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) |
| latency += audio_extn_a2dp_get_encoder_latency(); |
| |
| ALOGV("%s: Latency %d", __func__, latency); |
| return latency; |
| } |
| |
| static float AmpToDb(float amplification) |
| { |
| float db = DSD_VOLUME_MIN_DB; |
| if (amplification > 0) { |
| db = 20 * log10(amplification); |
| if(db < DSD_VOLUME_MIN_DB) |
| return DSD_VOLUME_MIN_DB; |
| } |
| return db; |
| } |
| |
| static int out_set_volume(struct audio_stream_out *stream, float left, |
| float right) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int volume[2]; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MULTI_CH) { |
| /* only take left channel into account: the API is for stereo anyway */ |
| out->muted = (left == 0.0f); |
| return 0; |
| } else if (is_offload_usecase(out->usecase)) { |
| if (audio_extn_passthru_is_passthrough_stream(out)) { |
| /* |
| * Set mute or umute on HDMI passthrough stream. |
| * Only take left channel into account. |
| * Mute is 0 and unmute 1 |
| */ |
| audio_extn_passthru_set_volume(out, (left == 0.0f)); |
| } else if (out->format == AUDIO_FORMAT_DSD){ |
| char mixer_ctl_name[128] = "DSD Volume"; |
| struct audio_device *adev = out->dev; |
| struct mixer_ctl *ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, mixer_ctl_name); |
| return -EINVAL; |
| } |
| volume[0] = (int)(AmpToDb(left)); |
| volume[1] = (int)(AmpToDb(right)); |
| mixer_ctl_set_array(ctl, volume, sizeof(volume)/sizeof(volume[0])); |
| return 0; |
| } else { |
| char mixer_ctl_name[128]; |
| struct audio_device *adev = out->dev; |
| struct mixer_ctl *ctl; |
| int pcm_device_id = platform_get_pcm_device_id(out->usecase, |
| PCM_PLAYBACK); |
| |
| snprintf(mixer_ctl_name, sizeof(mixer_ctl_name), |
| "Compress Playback %d Volume", pcm_device_id); |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, mixer_ctl_name); |
| return -EINVAL; |
| } |
| volume[0] = (int)(left * COMPRESS_PLAYBACK_VOLUME_MAX); |
| volume[1] = (int)(right * COMPRESS_PLAYBACK_VOLUME_MAX); |
| mixer_ctl_set_array(ctl, volume, sizeof(volume)/sizeof(volume[0])); |
| return 0; |
| } |
| } |
| |
| return -ENOSYS; |
| } |
| |
| static ssize_t out_write(struct audio_stream_out *stream, const void *buffer, |
| size_t bytes) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int snd_scard_state = get_snd_card_state(adev); |
| ssize_t ret = 0; |
| |
| lock_output_stream(out); |
| |
| if (SND_CARD_STATE_OFFLINE == snd_scard_state) { |
| |
| if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) { |
| /*during SSR for compress usecase we should return error to flinger*/ |
| ALOGD(" copl %s: sound card is not active/SSR state", __func__); |
| pthread_mutex_unlock(&out->lock); |
| return -ENETRESET; |
| } else { |
| /* increase written size during SSR to avoid mismatch |
| * with the written frames count in AF |
| */ |
| // bytes per frame |
| size_t bpf = audio_bytes_per_sample(out->format) * |
| audio_channel_count_from_out_mask(out->channel_mask); |
| if (bpf != 0) |
| out->written += bytes / bpf; |
| ALOGD(" %s: sound card is not active/SSR state", __func__); |
| ret= -EIO; |
| goto exit; |
| } |
| } |
| |
| if (audio_extn_passthru_should_drop_data(out)) { |
| ALOGV(" %s : Drop data as compress passthrough session is going on", __func__); |
| if (audio_bytes_per_sample(out->format) != 0) |
| out->written += bytes / (out->config.channels * audio_bytes_per_sample(out->format)); |
| ret = -EIO; |
| goto exit; |
| } |
| |
| if (out->standby) { |
| out->standby = false; |
| pthread_mutex_lock(&adev->lock); |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) |
| ret = voice_extn_compress_voip_start_output_stream(out); |
| else |
| ret = start_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| /* ToDo: If use case is compress offload should return 0 */ |
| if (ret != 0) { |
| out->standby = true; |
| goto exit; |
| } |
| |
| if (last_known_cal_step != -1) { |
| ALOGD("%s: retry previous failed cal level set", __func__); |
| audio_hw_send_gain_dep_calibration(last_known_cal_step); |
| } |
| } |
| |
| if (adev->is_channel_status_set == false && (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL)){ |
| audio_utils_set_hdmi_channel_status(out, (void *)buffer, bytes); |
| adev->is_channel_status_set = true; |
| } |
| |
| if (is_offload_usecase(out->usecase)) { |
| ALOGVV("copl(%p): writing buffer (%zu bytes) to compress device", out, bytes); |
| if (out->send_new_metadata) { |
| ALOGD("copl(%p):send new gapless metadata", out); |
| compress_set_gapless_metadata(out->compr, &out->gapless_mdata); |
| out->send_new_metadata = 0; |
| if (out->send_next_track_params && out->is_compr_metadata_avail) { |
| ALOGD("copl(%p):send next track params in gapless", out); |
| compress_set_next_track_param(out->compr, &(out->compr_config.codec->options)); |
| out->send_next_track_params = false; |
| out->is_compr_metadata_avail = false; |
| } |
| } |
| if (!(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) && |
| (out->convert_buffer) != NULL) { |
| |
| if ((bytes > out->hal_fragment_size)) { |
| ALOGW("Error written bytes %zu > %d (fragment_size)", |
| bytes, out->hal_fragment_size); |
| pthread_mutex_unlock(&out->lock); |
| return -EINVAL; |
| } else { |
| audio_format_t dst_format = out->hal_op_format; |
| audio_format_t src_format = out->hal_ip_format; |
| |
| uint32_t frames = bytes / format_to_bitwidth_table[src_format]; |
| uint32_t bytes_to_write = frames * format_to_bitwidth_table[dst_format]; |
| |
| memcpy_by_audio_format(out->convert_buffer, |
| dst_format, |
| buffer, |
| src_format, |
| frames); |
| |
| ret = compress_write(out->compr, out->convert_buffer, |
| bytes_to_write); |
| |
| /*Convert written bytes in audio flinger format*/ |
| if (ret > 0) |
| ret = ((ret * format_to_bitwidth_table[out->format]) / |
| format_to_bitwidth_table[dst_format]); |
| } |
| } else |
| ret = compress_write(out->compr, buffer, bytes); |
| |
| if (ret < 0) |
| ret = -errno; |
| ALOGVV("%s: writing buffer (%zu bytes) to compress device returned %zd", __func__, bytes, ret); |
| /*msg to cb thread only if non blocking write is enabled*/ |
| if (ret >= 0 && ret < (ssize_t)bytes && out->non_blocking) { |
| ALOGD("No space available in compress driver, post msg to cb thread"); |
| send_offload_cmd_l(out, OFFLOAD_CMD_WAIT_FOR_BUFFER); |
| } else if (-ENETRESET == ret) { |
| ALOGE("copl %s: received sound card offline state on compress write", __func__); |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| pthread_mutex_unlock(&out->lock); |
| out_standby(&out->stream.common); |
| return ret; |
| } |
| if ( ret == (ssize_t)bytes && !out->non_blocking) |
| out->written += bytes; |
| |
| /* Call compr start only when non-zero bytes of data is there to be rendered */ |
| if (!out->playback_started && ret > 0) { |
| int status = compress_start(out->compr); |
| if (status < 0) { |
| ret = status; |
| ALOGE("%s: compr start failed with err %d", __func__, errno); |
| goto exit; |
| } |
| audio_extn_dts_eagle_fade(adev, true, out); |
| out->playback_started = 1; |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| |
| audio_extn_dts_notify_playback_state(out->usecase, 0, out->sample_rate, |
| popcount(out->channel_mask), |
| out->playback_started); |
| } |
| pthread_mutex_unlock(&out->lock); |
| return ret; |
| } else { |
| if (out->pcm) { |
| if (out->muted) |
| memset((void *)buffer, 0, bytes); |
| |
| ALOGVV("%s: writing buffer (%zu bytes) to pcm device", __func__, bytes); |
| |
| long ns = 0; |
| |
| if (out->config.rate) |
| ns = pcm_bytes_to_frames(out->pcm, bytes)*1000000000LL/ |
| out->config.rate; |
| |
| bool use_mmap = is_mmap_usecase(out->usecase) || out->realtime; |
| |
| request_out_focus(out, ns); |
| |
| if (use_mmap) |
| ret = pcm_mmap_write(out->pcm, (void *)buffer, bytes); |
| else if (out->hal_op_format != out->hal_ip_format && |
| out->convert_buffer != NULL) { |
| |
| memcpy_by_audio_format(out->convert_buffer, |
| out->hal_op_format, |
| buffer, |
| out->hal_ip_format, |
| out->config.period_size * out->config.channels); |
| |
| ret = pcm_write(out->pcm, out->convert_buffer, |
| (out->config.period_size * |
| out->config.channels * |
| format_to_bitwidth_table[out->hal_op_format])); |
| } else { |
| ret = pcm_write(out->pcm, (void *)buffer, bytes); |
| } |
| |
| release_out_focus(out); |
| |
| if (ret < 0) |
| ret = -errno; |
| else if (ret == 0 && (audio_bytes_per_sample(out->format) != 0)) |
| out->written += bytes / (out->config.channels * audio_bytes_per_sample(out->format)); |
| else |
| ret = -EINVAL; |
| } |
| } |
| |
| exit: |
| /* ToDo: There may be a corner case when SSR happens back to back during |
| start/stop. Need to post different error to handle that. */ |
| if (-ENETRESET == ret) { |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| } |
| |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| if (out->pcm) |
| ALOGE("%s: error %d, %s", __func__, (int)ret, pcm_get_error(out->pcm)); |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| pthread_mutex_lock(&adev->lock); |
| voice_extn_compress_voip_close_output_stream(&out->stream.common); |
| pthread_mutex_unlock(&adev->lock); |
| out->standby = true; |
| } |
| out_standby(&out->stream.common); |
| if (!(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) |
| usleep((uint64_t)bytes * 1000000 / audio_stream_out_frame_size(stream) / |
| out_get_sample_rate(&out->stream.common)); |
| } |
| return bytes; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out *stream, |
| uint32_t *dsp_frames) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| if (dsp_frames == NULL) |
| return -EINVAL; |
| |
| *dsp_frames = 0; |
| if (is_offload_usecase(out->usecase)) { |
| ssize_t ret = 0; |
| |
| /* Below piece of code is not guarded against any lock beacuse audioFliner serializes |
| * this operation and adev_close_output_stream(where out gets reset). |
| */ |
| if (!out->non_blocking && !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) { |
| *dsp_frames = get_actual_pcm_frames_rendered(out); |
| ALOGVV("dsp_frames %d sampleRate %d",(int)*dsp_frames,out->sample_rate); |
| return 0; |
| } |
| |
| lock_output_stream(out); |
| if (out->compr != NULL && out->non_blocking) { |
| ret = compress_get_tstamp(out->compr, (unsigned long *)dsp_frames, |
| &out->sample_rate); |
| if (ret < 0) |
| ret = -errno; |
| ALOGVV("%s rendered frames %d sample_rate %d", |
| __func__, *dsp_frames, out->sample_rate); |
| } |
| pthread_mutex_unlock(&out->lock); |
| if (-ENETRESET == ret) { |
| ALOGE(" ERROR: sound card not active Unable to get time stamp from compress driver"); |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| return -EINVAL; |
| } else if(ret < 0) { |
| ALOGE(" ERROR: Unable to get time stamp from compress driver"); |
| return -EINVAL; |
| } else if (get_snd_card_state(adev) == SND_CARD_STATE_OFFLINE){ |
| /* |
| * Handle corner case where compress session is closed during SSR |
| * and timestamp is queried |
| */ |
| ALOGE(" ERROR: sound card not active, return error"); |
| return -EINVAL; |
| } else { |
| return 0; |
| } |
| } else if (audio_is_linear_pcm(out->format)) { |
| *dsp_frames = out->written; |
| return 0; |
| } else |
| return -EINVAL; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream *stream __unused, |
| effect_handle_t effect __unused) |
| { |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream *stream __unused, |
| effect_handle_t effect __unused) |
| { |
| return 0; |
| } |
| |
| static int out_get_next_write_timestamp(const struct audio_stream_out *stream __unused, |
| int64_t *timestamp __unused) |
| { |
| return -EINVAL; |
| } |
| |
| static int out_get_presentation_position(const struct audio_stream_out *stream, |
| uint64_t *frames, struct timespec *timestamp) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int ret = -1; |
| unsigned long dsp_frames; |
| |
| /* below piece of code is not guarded against any lock because audioFliner serializes |
| * this operation and adev_close_output_stream( where out gets reset). |
| */ |
| if (is_offload_usecase(out->usecase) && !out->non_blocking && |
| !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) { |
| *frames = get_actual_pcm_frames_rendered(out); |
| /* this is the best we can do */ |
| clock_gettime(CLOCK_MONOTONIC, timestamp); |
| ALOGVV("frames %lld playedat %lld",(long long int)*frames, |
| timestamp->tv_sec * 1000000LL + timestamp->tv_nsec / 1000); |
| return 0; |
| } |
| |
| lock_output_stream(out); |
| |
| if (is_offload_usecase(out->usecase) && out->compr != NULL && out->non_blocking) { |
| ret = compress_get_tstamp(out->compr, &dsp_frames, |
| &out->sample_rate); |
| ALOGVV("%s rendered frames %ld sample_rate %d", |
| __func__, dsp_frames, out->sample_rate); |
| *frames = dsp_frames; |
| if (ret < 0) |
| ret = -errno; |
| if (-ENETRESET == ret) { |
| ALOGE(" ERROR: sound card not active Unable to get time stamp from compress driver"); |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| ret = -EINVAL; |
| } else |
| ret = 0; |
| /* this is the best we can do */ |
| clock_gettime(CLOCK_MONOTONIC, timestamp); |
| } else { |
| if (out->pcm) { |
| unsigned int avail; |
| if (pcm_get_htimestamp(out->pcm, &avail, timestamp) == 0) { |
| size_t kernel_buffer_size = out->config.period_size * out->config.period_count; |
| int64_t signed_frames = out->written - kernel_buffer_size + avail; |
| // This adjustment accounts for buffering after app processor. |
| // It is based on estimated DSP latency per use case, rather than exact. |
| signed_frames -= |
| (platform_render_latency(out->usecase) * out->sample_rate / 1000000LL); |
| |
| // It would be unusual for this value to be negative, but check just in case ... |
| if (signed_frames >= 0) { |
| *frames = signed_frames; |
| ret = 0; |
| } |
| } |
| } else if (adev->snd_card_status.state == SND_CARD_STATE_OFFLINE) { |
| *frames = out->written; |
| clock_gettime(CLOCK_MONOTONIC, timestamp); |
| ret = 0; |
| } |
| } |
| pthread_mutex_unlock(&out->lock); |
| return ret; |
| } |
| |
| static int out_set_callback(struct audio_stream_out *stream, |
| stream_callback_t callback, void *cookie) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| ALOGV("%s", __func__); |
| lock_output_stream(out); |
| out->offload_callback = callback; |
| out->offload_cookie = cookie; |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } |
| |
| static int out_pause(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (is_offload_usecase(out->usecase)) { |
| ALOGD("copl(%p):pause compress driver", out); |
| lock_output_stream(out); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PLAYING) { |
| struct audio_device *adev = out->dev; |
| int snd_scard_state = get_snd_card_state(adev); |
| |
| if (SND_CARD_STATE_ONLINE == snd_scard_state) |
| status = compress_pause(out->compr); |
| |
| out->offload_state = OFFLOAD_STATE_PAUSED; |
| |
| if (audio_extn_passthru_is_active()) { |
| ALOGV("offload use case, pause passthru"); |
| audio_extn_passthru_on_pause(out); |
| } |
| |
| audio_extn_dts_eagle_fade(adev, false, out); |
| audio_extn_dts_notify_playback_state(out->usecase, 0, |
| out->sample_rate, popcount(out->channel_mask), |
| 0); |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_resume(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (is_offload_usecase(out->usecase)) { |
| ALOGD("copl(%p):resume compress driver", out); |
| status = 0; |
| lock_output_stream(out); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PAUSED) { |
| struct audio_device *adev = out->dev; |
| int snd_scard_state = get_snd_card_state(adev); |
| |
| if (SND_CARD_STATE_ONLINE == snd_scard_state) { |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| pthread_mutex_lock(&out->dev->lock); |
| ALOGV("offload resume, check and set hdmi backend again"); |
| pthread_mutex_unlock(&out->dev->lock); |
| } |
| status = compress_resume(out->compr); |
| } |
| if (!status) { |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| } |
| audio_extn_dts_eagle_fade(adev, true, out); |
| audio_extn_dts_notify_playback_state(out->usecase, 0, out->sample_rate, |
| popcount(out->channel_mask), 1); |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_drain(struct audio_stream_out* stream, audio_drain_type_t type ) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (is_offload_usecase(out->usecase)) { |
| lock_output_stream(out); |
| if (type == AUDIO_DRAIN_EARLY_NOTIFY) |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_PARTIAL_DRAIN); |
| else |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_DRAIN); |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_flush(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| ALOGV("%s", __func__); |
| if (is_offload_usecase(out->usecase)) { |
| ALOGD("copl(%p):calling compress flush", out); |
| lock_output_stream(out); |
| if (out->offload_state == OFFLOAD_STATE_PAUSED) { |
| stop_compressed_output_l(out); |
| out->written = 0; |
| } else { |
| ALOGW("%s called in invalid state %d", __func__, out->offload_state); |
| } |
| pthread_mutex_unlock(&out->lock); |
| ALOGD("copl(%p):out of compress flush", out); |
| return 0; |
| } |
| return -ENOSYS; |
| } |
| |
| /** audio_stream_in implementation **/ |
| static uint32_t in_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->config.rate; |
| } |
| |
| static int in_set_sample_rate(struct audio_stream *stream __unused, |
| uint32_t rate __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t in_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| if(in->usecase == USECASE_COMPRESS_VOIP_CALL) |
| return voice_extn_compress_voip_in_get_buffer_size(in); |
| else if(audio_extn_compr_cap_usecase_supported(in->usecase)) |
| return audio_extn_compr_cap_get_buffer_size(in->config.format); |
| else if(audio_extn_cin_attached_usecase(in->usecase)) |
| return audio_extn_cin_get_buffer_size(in); |
| |
| return in->config.period_size * in->af_period_multiplier * |
| audio_stream_in_frame_size((const struct audio_stream_in *)stream); |
| } |
| |
| static uint32_t in_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->channel_mask; |
| } |
| |
| static audio_format_t in_get_format(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->format; |
| } |
| |
| static int in_set_format(struct audio_stream *stream __unused, |
| audio_format_t format __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int in_standby(struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int status = 0; |
| ALOGD("%s: enter: stream (%p) usecase(%d: %s)", __func__, |
| stream, in->usecase, use_case_table[in->usecase]); |
| |
| lock_input_stream(in); |
| if (!in->standby && in->is_st_session) { |
| ALOGD("%s: sound trigger pcm stop lab", __func__); |
| audio_extn_sound_trigger_stop_lab(in); |
| in->standby = 1; |
| } |
| |
| if (!in->standby) { |
| if (adev->adm_deregister_stream) |
| adev->adm_deregister_stream(adev->adm_data, in->capture_handle); |
| |
| pthread_mutex_lock(&adev->lock); |
| in->standby = true; |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| voice_extn_compress_voip_close_input_stream(stream); |
| ALOGD("VOIP input entered standby"); |
| } else { |
| if (audio_extn_cin_attached_usecase(in->usecase)) |
| audio_extn_cin_stop_input_stream(in); |
| if (in->pcm) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| status = stop_input_stream(in); |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&in->lock); |
| ALOGV("%s: exit: status(%d)", __func__, status); |
| return status; |
| } |
| |
| static int in_dump(const struct audio_stream *stream __unused, |
| int fd __unused) |
| { |
| return 0; |
| } |
| |
| static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| struct str_parms *parms; |
| char value[32]; |
| int ret = 0, val = 0, err; |
| |
| ALOGD("%s: enter: kvpairs=%s", __func__, kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| |
| if (!parms) |
| goto error; |
| lock_input_stream(in); |
| pthread_mutex_lock(&adev->lock); |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_INPUT_SOURCE, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| /* no audio source uses val == 0 */ |
| if ((in->source != val) && (val != 0)) { |
| in->source = val; |
| if ((in->source == AUDIO_SOURCE_VOICE_COMMUNICATION) && |
| (in->dev->mode == AUDIO_MODE_IN_COMMUNICATION) && |
| (voice_extn_compress_voip_is_format_supported(in->format)) && |
| (in->config.rate == 8000 || in->config.rate == 16000 || |
| in->config.rate == 32000 || in->config.rate == 48000 ) && |
| (audio_channel_count_from_in_mask(in->channel_mask) == 1)) { |
| err = voice_extn_compress_voip_open_input_stream(in); |
| if (err != 0) { |
| ALOGE("%s: Compress voip input cannot be opened, error:%d", |
| __func__, err); |
| } |
| } |
| } |
| } |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (err >= 0) { |
| val = atoi(value); |
| if (((int)in->device != val) && (val != 0)) { |
| in->device = val; |
| /* If recording is in progress, change the tx device to new device */ |
| if (!in->standby && !in->is_st_session) { |
| ALOGV("update input routing change"); |
| if (adev->adm_on_routing_change) |
| adev->adm_on_routing_change(adev->adm_data, |
| in->capture_handle); |
| ret = select_devices(adev, in->usecase); |
| } |
| } |
| } |
| |
| err = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_PROFILE, value, sizeof(value)); |
| if (err >= 0) { |
| strlcpy(in->profile, value, sizeof(in->profile)); |
| ALOGV("updating stream profile with value '%s'", in->profile); |
| audio_extn_utils_update_stream_input_app_type_cfg(adev->platform, |
| &adev->streams_input_cfg_list, |
| in->device, in->flags, in->format, |
| in->sample_rate, in->bit_width, |
| in->profile, &in->app_type_cfg); |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| str_parms_destroy(parms); |
| error: |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| static char* in_get_parameters(const struct audio_stream *stream, |
| const char *keys) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| struct str_parms *reply = str_parms_create(); |
| |
| if (!query || !reply) { |
| if (reply) { |
| str_parms_destroy(reply); |
| } |
| if (query) { |
| str_parms_destroy(query); |
| } |
| ALOGE("in_get_parameters: failed to create query or reply"); |
| return NULL; |
| } |
| |
| ALOGV("%s: enter: keys - %s", __func__, keys); |
| |
| voice_extn_in_get_parameters(in, query, reply); |
| |
| str = str_parms_to_str(reply); |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static int in_set_gain(struct audio_stream_in *stream __unused, |
| float gain __unused) |
| { |
| return 0; |
| } |
| |
| static ssize_t in_read(struct audio_stream_in *stream, void *buffer, |
| size_t bytes) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int ret = -1; |
| int snd_scard_state = get_snd_card_state(adev); |
| size_t bytes_read = 0; |
| |
| lock_input_stream(in); |
| |
| if (in->is_st_session) { |
| ALOGVV(" %s: reading on st session bytes=%zu", __func__, bytes); |
| /* Read from sound trigger HAL */ |
| audio_extn_sound_trigger_read(in, buffer, bytes); |
| pthread_mutex_unlock(&in->lock); |
| return bytes; |
| } |
| |
| if (SND_CARD_STATE_OFFLINE == snd_scard_state) { |
| ALOGD(" %s: sound card is not active/SSR state", __func__); |
| ret= -EIO;; |
| goto exit; |
| } |
| |
| if (in->standby) { |
| pthread_mutex_lock(&adev->lock); |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) |
| ret = voice_extn_compress_voip_start_input_stream(in); |
| else |
| ret = start_input_stream(in); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) { |
| goto exit; |
| } |
| in->standby = 0; |
| } |
| |
| // what's the duration requested by the client? |
| long ns = 0; |
| |
| if (in->pcm && in->config.rate) |
| ns = pcm_bytes_to_frames(in->pcm, bytes)*1000000000LL/ |
| in->config.rate; |
| |
| request_in_focus(in, ns); |
| bool use_mmap = is_mmap_usecase(in->usecase) || in->realtime; |
| |
| if (audio_extn_cin_attached_usecase(in->usecase)) { |
| ret = audio_extn_cin_read(in, buffer, bytes, &bytes_read); |
| } else if (in->pcm) { |
| if (audio_extn_ssr_get_stream() == in) { |
| ret = audio_extn_ssr_read(stream, buffer, bytes); |
| } else if (audio_extn_compr_cap_usecase_supported(in->usecase)) { |
| ret = audio_extn_compr_cap_read(in, buffer, bytes); |
| } else if (use_mmap) { |
| ret = pcm_mmap_read(in->pcm, buffer, bytes); |
| } else { |
| ret = pcm_read(in->pcm, buffer, bytes); |
| /* data from DSP comes in 24_8 format, convert it to 8_24 */ |
| if (!ret && bytes > 0 && (in->format == AUDIO_FORMAT_PCM_8_24_BIT)) { |
| if (audio_extn_utils_convert_format_24_8_to_8_24(buffer, bytes) |
| != bytes) { |
| ret = -EINVAL; |
| goto exit; |
| } |
| } else if (ret < 0) { |
| ret = -errno; |
| } |
| } |
| /* bytes read is always set to bytes for non compress usecases */ |
| bytes_read = bytes; |
| } |
| |
| release_in_focus(in); |
| |
| /* |
| * Instead of writing zeroes here, we could trust the hardware |
| * to always provide zeroes when muted. |
| */ |
| if (ret == 0 && voice_get_mic_mute(adev) && !voice_is_in_call_rec_stream(in) && |
| in->usecase != USECASE_AUDIO_RECORD_AFE_PROXY) |
| memset(buffer, 0, bytes); |
| |
| exit: |
| /* ToDo: There may be a corner case when SSR happens back to back during |
| start/stop. Need to post different error to handle that. */ |
| if (-ENETRESET == ret) |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| |
| pthread_mutex_unlock(&in->lock); |
| |
| if (ret != 0) { |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| pthread_mutex_lock(&adev->lock); |
| voice_extn_compress_voip_close_input_stream(&in->stream.common); |
| pthread_mutex_unlock(&adev->lock); |
| in->standby = true; |
| } |
| if (!audio_extn_cin_attached_usecase(in->usecase)) { |
| bytes_read = bytes; |
| memset(buffer, 0, bytes); |
| } |
| in_standby(&in->stream.common); |
| ALOGV("%s: read failed status %d- sleeping for buffer duration", __func__, ret); |
| usleep((uint64_t)bytes * 1000000 / audio_stream_in_frame_size(stream) / |
| in_get_sample_rate(&in->stream.common)); |
| } |
| return bytes_read; |
| } |
| |
| static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream __unused) |
| { |
| return 0; |
| } |
| |
| static int add_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect, |
| bool enable) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| int status = 0; |
| effect_descriptor_t desc; |
| |
| status = (*effect)->get_descriptor(effect, &desc); |
| if (status != 0) |
| return status; |
| |
| lock_input_stream(in); |
| pthread_mutex_lock(&in->dev->lock); |
| if ((in->source == AUDIO_SOURCE_VOICE_COMMUNICATION) && |
| in->enable_aec != enable && |
| (memcmp(&desc.type, FX_IID_AEC, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_aec = enable; |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| if (in->enable_ns != enable && |
| (memcmp(&desc.type, FX_IID_NS, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_ns = enable; |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| pthread_mutex_unlock(&in->dev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| return 0; |
| } |
| |
| static int in_add_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, true); |
| } |
| |
| static int in_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, false); |
| } |
| |
| int adev_open_output_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| audio_output_flags_t flags, |
| struct audio_config *config, |
| struct audio_stream_out **stream_out, |
| const char *address __unused) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_out *out; |
| int ret = 0; |
| audio_format_t format; |
| |
| *stream_out = NULL; |
| |
| if ((flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) && |
| (SND_CARD_STATE_OFFLINE == get_snd_card_state(adev))) { |
| ALOGE("sound card is not active rejecting compress output open request"); |
| return -EINVAL; |
| } |
| |
| out = (struct stream_out *)calloc(1, sizeof(struct stream_out)); |
| |
| ALOGD("%s: enter: format(%#x) sample_rate(%d) channel_mask(%#x) devices(%#x) flags(%#x)\ |
| stream_handle(%p)", __func__, config->format, config->sample_rate, config->channel_mask, |
| devices, flags, &out->stream); |
| |
| |
| if (!out) { |
| return -ENOMEM; |
| } |
| |
| pthread_mutex_init(&out->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_mutex_init(&out->pre_lock, (const pthread_mutexattr_t *) NULL); |
| pthread_cond_init(&out->cond, (const pthread_condattr_t *) NULL); |
| |
| if (devices == AUDIO_DEVICE_NONE) |
| devices = AUDIO_DEVICE_OUT_SPEAKER; |
| |
| out->flags = flags; |
| out->devices = devices; |
| out->dev = adev; |
| format = out->format = config->format; |
| out->sample_rate = config->sample_rate; |
| out->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_STEREO; |
| out->handle = handle; |
| out->bit_width = CODEC_BACKEND_DEFAULT_BIT_WIDTH; |
| out->non_blocking = 0; |
| out->convert_buffer = NULL; |
| |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL && |
| (flags & AUDIO_OUTPUT_FLAG_DIRECT)) { |
| pthread_mutex_lock(&adev->lock); |
| ALOGV("AUDIO_DEVICE_OUT_AUX_DIGITAL and DIRECT|OFFLOAD, check hdmi caps"); |
| ret = read_hdmi_sink_caps(out); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) { |
| if (ret == -ENOSYS) { |
| /* ignore and go with default */ |
| ret = 0; |
| } else { |
| ALOGE("error reading hdmi sink caps"); |
| goto error_open; |
| } |
| } |
| } |
| |
| /* Init use case and pcm_config */ |
| if ((out->dev->mode == AUDIO_MODE_IN_COMMUNICATION || voice_extn_compress_voip_is_active(out->dev)) && |
| (out->flags == (AUDIO_OUTPUT_FLAG_DIRECT | AUDIO_OUTPUT_FLAG_VOIP_RX)) && |
| (voice_extn_compress_voip_is_config_supported(config))) { |
| ret = voice_extn_compress_voip_open_output_stream(out); |
| if (ret != 0) { |
| ALOGE("%s: Compress voip output cannot be opened, error:%d", |
| __func__, ret); |
| goto error_open; |
| } |
| } else if ((out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) || |
| (out->flags == AUDIO_OUTPUT_FLAG_DIRECT)) { |
| |
| if (config->offload_info.version != AUDIO_INFO_INITIALIZER.version || |
| config->offload_info.size != AUDIO_INFO_INITIALIZER.size) { |
| ALOGE("%s: Unsupported Offload information", __func__); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| if(config->offload_info.format == 0) |
| config->offload_info.format = out->supported_formats[0]; |
| if (config->offload_info.sample_rate == 0) |
| config->offload_info.sample_rate = out->supported_sample_rates[0]; |
| } |
| |
| if (!is_supported_format(config->offload_info.format) && |
| !audio_extn_passthru_is_supported_format(config->offload_info.format)) { |
| ALOGE("%s: Unsupported audio format %x " , __func__, config->offload_info.format); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| out->compr_config.codec = (struct snd_codec *) |
| calloc(1, sizeof(struct snd_codec)); |
| |
| if (!out->compr_config.codec) { |
| ret = -ENOMEM; |
| goto error_open; |
| } |
| |
| out->stream.pause = out_pause; |
| out->stream.resume = out_resume; |
| out->stream.flush = out_flush; |
| if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) { |
| out->stream.set_callback = out_set_callback; |
| out->stream.drain = out_drain; |
| out->usecase = get_offload_usecase(adev, true /* is_compress */); |
| ALOGV("Compress Offload usecase .. usecase selected %d", out->usecase); |
| } else { |
| out->usecase = get_offload_usecase(adev, false /* is_compress */); |
| ALOGV("non-offload DIRECT_usecase ... usecase selected %d ", out->usecase); |
| } |
| |
| if (out->usecase == USECASE_INVALID) { |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL && |
| config->format == 0 && config->sample_rate == 0 && |
| config->channel_mask == 0) { |
| ALOGI("%s dummy open to query sink capability",__func__); |
| out->usecase = USECASE_AUDIO_PLAYBACK_OFFLOAD; |
| } else { |
| ALOGE("%s, Max allowed OFFLOAD usecase reached ... ", __func__); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| } |
| |
| if (config->offload_info.channel_mask) |
| out->channel_mask = config->offload_info.channel_mask; |
| else if (config->channel_mask) { |
| out->channel_mask = config->channel_mask; |
| config->offload_info.channel_mask = config->channel_mask; |
| } else { |
| ALOGE("out->channel_mask not set for OFFLOAD/DIRECT usecase"); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| format = out->format = config->offload_info.format; |
| out->sample_rate = config->offload_info.sample_rate; |
| |
| out->bit_width = CODEC_BACKEND_DEFAULT_BIT_WIDTH; |
| |
| out->compr_config.codec->id = get_snd_codec_id(config->offload_info.format); |
| if (audio_extn_is_dolby_format(config->offload_info.format)) { |
| audio_extn_dolby_send_ddp_endp_params(adev); |
| audio_extn_dolby_set_dmid(adev); |
| } |
| |
| out->compr_config.codec->sample_rate = |
| config->offload_info.sample_rate; |
| out->compr_config.codec->bit_rate = |
| config->offload_info.bit_rate; |
| out->compr_config.codec->ch_in = |
| audio_channel_count_from_out_mask(out->channel_mask); |
| out->compr_config.codec->ch_out = out->compr_config.codec->ch_in; |
| /* Update bit width only for non passthrough usecases. |
| * For passthrough usecases, the output will always be opened @16 bit |
| */ |
| if (!audio_extn_passthru_is_passthrough_stream(out)) |
| out->bit_width = AUDIO_OUTPUT_BIT_WIDTH; |
| /*TODO: Do we need to change it for passthrough */ |
| out->compr_config.codec->format = SND_AUDIOSTREAMFORMAT_RAW; |
| |
| if ((config->offload_info.format & AUDIO_FORMAT_MAIN_MASK) == AUDIO_FORMAT_AAC) |
| out->compr_config.codec->format = SND_AUDIOSTREAMFORMAT_RAW; |
| else if ((config->offload_info.format & AUDIO_FORMAT_MAIN_MASK) == AUDIO_FORMAT_AAC_ADTS) |
| out->compr_config.codec->format = SND_AUDIOSTREAMFORMAT_MP4ADTS; |
| else if ((config->offload_info.format & AUDIO_FORMAT_MAIN_MASK) == AUDIO_FORMAT_AAC_LATM) |
| out->compr_config.codec->format = SND_AUDIOSTREAMFORMAT_MP4LATM; |
| |
| if ((config->offload_info.format & AUDIO_FORMAT_MAIN_MASK) == |
| AUDIO_FORMAT_PCM) { |
| |
| /*Based on platform support, configure appropriate alsa format for corresponding |
| *hal input format. |
| */ |
| out->compr_config.codec->format = hal_format_to_alsa( |
| config->offload_info.format); |
| |
| out->hal_op_format = alsa_format_to_hal( |
| out->compr_config.codec->format); |
| out->hal_ip_format = out->format; |
| |
| /*for direct non-compress playback populate bit_width based on selected alsa format as |
| *hal input format and alsa format might differ based on platform support. |
| */ |
| out->bit_width = audio_bytes_per_sample( |
| out->hal_op_format) << 3; |
| |
| out->compr_config.fragments = DIRECT_PCM_NUM_FRAGMENTS; |
| |
| /* Check if alsa session is configured with the same format as HAL input format, |
| * if not then derive correct fragment size needed to accomodate the |
| * conversion of HAL input format to alsa format. |
| */ |
| audio_extn_utils_update_direct_pcm_fragment_size(out); |
| |
| /*if hal input and output fragment size is different this indicates HAL input format is |
| *not same as the alsa format |
| */ |
| if (out->hal_fragment_size != out->compr_config.fragment_size) { |
| /*Allocate a buffer to convert input data to the alsa configured format. |
| *size of convert buffer is equal to the size required to hold one fragment size |
| *worth of pcm data, this is because flinger does not write more than fragment_size |
| */ |
| out->convert_buffer = calloc(1,out->compr_config.fragment_size); |
| if (out->convert_buffer == NULL){ |
| ALOGE("Allocation failed for convert buffer for size %d", out->compr_config.fragment_size); |
| ret = -ENOMEM; |
| goto error_open; |
| } |
| } |
| } else if (audio_extn_passthru_is_passthrough_stream(out)) { |
| out->compr_config.fragment_size = |
| audio_extn_passthru_get_buffer_size(&config->offload_info); |
| out->compr_config.fragments = COMPRESS_OFFLOAD_NUM_FRAGMENTS; |
| } else { |
| out->compr_config.fragment_size = |
| platform_get_compress_offload_buffer_size(&config->offload_info); |
| out->compr_config.fragments = COMPRESS_OFFLOAD_NUM_FRAGMENTS; |
| } |
| |
| if (config->offload_info.format == AUDIO_FORMAT_FLAC) |
| out->compr_config.codec->options.flac_dec.sample_size = AUDIO_OUTPUT_BIT_WIDTH; |
| |
| if (config->offload_info.format == AUDIO_FORMAT_APTX) { |
| audio_extn_send_aptx_dec_bt_addr_to_dsp(out); |
| } |
| |
| if (flags & AUDIO_OUTPUT_FLAG_NON_BLOCKING) |
| out->non_blocking = 1; |
| |
| if ((flags & AUDIO_OUTPUT_FLAG_TIMESTAMP) && |
| (flags & AUDIO_OUTPUT_FLAG_HW_AV_SYNC)) { |
| out->render_mode = RENDER_MODE_AUDIO_STC_MASTER; |
| } else if(flags & AUDIO_OUTPUT_FLAG_TIMESTAMP) { |
| out->render_mode = RENDER_MODE_AUDIO_MASTER; |
| } else { |
| out->render_mode = RENDER_MODE_AUDIO_NO_TIMESTAMP; |
| } |
| |
| memset(&out->render_window, 0, |
| sizeof(struct audio_out_render_window_param)); |
| |
| out->send_new_metadata = 1; |
| out->send_next_track_params = false; |
| out->is_compr_metadata_avail = false; |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| |
| audio_extn_dts_create_state_notifier_node(out->usecase); |
| |
| ALOGV("%s: offloaded output offload_info version %04x bit rate %d", |
| __func__, config->offload_info.version, |
| config->offload_info.bit_rate); |
| |
| /* Check if DSD audio format is supported in codec |
| * and there is no active native DSD use case |
| */ |
| |
| if ((config->format == AUDIO_FORMAT_DSD) && |
| (!platform_check_codec_dsd_support(adev->platform) || |
| audio_is_dsd_native_stream_active(adev))) { |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| /* Disable gapless if any of the following is true |
| * passthrough playback |
| * AV playback |
| * non compressed Direct playback |
| */ |
| if (audio_extn_passthru_is_passthrough_stream(out) || |
| (config->format == AUDIO_FORMAT_DSD) || |
| config->offload_info.has_video || |
| !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD)) { |
| check_and_set_gapless_mode(adev, false); |
| } else |
| check_and_set_gapless_mode(adev, true); |
| |
| if (audio_extn_passthru_is_passthrough_stream(out)) { |
| out->flags |= AUDIO_OUTPUT_FLAG_COMPRESS_PASSTHROUGH; |
| } |
| if (config->format == AUDIO_FORMAT_DSD) { |
| out->flags |= AUDIO_OUTPUT_FLAG_COMPRESS_PASSTHROUGH; |
| out->compr_config.codec->compr_passthr = PASSTHROUGH_DSD; |
| } |
| |
| create_offload_callback_thread(out); |
| |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_INCALL_MUSIC) { |
| ret = voice_extn_check_and_set_incall_music_usecase(adev, out); |
| if (ret != 0) { |
| ALOGE("%s: Incall music delivery usecase cannot be set error:%d", |
| __func__, ret); |
| goto error_open; |
| } |
| } else if (out->devices == AUDIO_DEVICE_OUT_TELEPHONY_TX) { |
| if (config->sample_rate == 0) |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| if (config->sample_rate != 48000 && config->sample_rate != 16000 && |
| config->sample_rate != 8000) { |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| ret = -EINVAL; |
| goto error_open; |
| } |
| out->sample_rate = config->sample_rate; |
| out->config.rate = config->sample_rate; |
| if (config->format == AUDIO_FORMAT_DEFAULT) |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| if (config->format != AUDIO_FORMAT_PCM_16_BIT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| ret = -EINVAL; |
| goto error_open; |
| } |
| out->format = config->format; |
| out->usecase = USECASE_AUDIO_PLAYBACK_AFE_PROXY; |
| out->config = pcm_config_afe_proxy_playback; |
| adev->voice_tx_output = out; |
| } else { |
| unsigned int channels = 0; |
| /*Update config params to default if not set by the caller*/ |
| if (config->sample_rate == 0) |
| config->sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| if (config->channel_mask == AUDIO_CHANNEL_NONE) |
| config->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| if (config->format == AUDIO_FORMAT_DEFAULT) |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| |
| channels = audio_channel_count_from_out_mask(out->channel_mask); |
| |
| if (out->flags & AUDIO_OUTPUT_FLAG_RAW) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_ULL; |
| out->realtime = may_use_noirq_mode(adev, USECASE_AUDIO_PLAYBACK_ULL, |
| out->flags); |
| out->config = out->realtime ? pcm_config_rt : pcm_config_low_latency; |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_FAST) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_LOW_LATENCY; |
| out->config = pcm_config_low_latency; |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_DEEP_BUFFER) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_DEEP_BUFFER; |
| out->config = pcm_config_deep_buffer; |
| out->config.period_size = get_output_period_size(config->sample_rate, out->format, |
| channels, DEEP_BUFFER_OUTPUT_PERIOD_DURATION); |
| if (out->config.period_size <= 0) { |
| ALOGE("Invalid configuration period size is not valid"); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| } else { |
| /* primary path is the default path selected if no other outputs are available/suitable */ |
| out->usecase = USECASE_AUDIO_PLAYBACK_PRIMARY; |
| out->config = PCM_CONFIG_AUDIO_PLAYBACK_PRIMARY; |
| } |
| out->hal_ip_format = format = out->format; |
| out->config.format = hal_format_to_pcm(out->hal_ip_format); |
| out->hal_op_format = pcm_format_to_hal(out->config.format); |
| out->bit_width = format_to_bitwidth_table[out->hal_op_format] << 3; |
| out->config.rate = config->sample_rate; |
| out->sample_rate = out->config.rate; |
| out->config.channels = channels; |
| if (out->hal_ip_format != out->hal_op_format) { |
| uint32_t buffer_size = out->config.period_size * |
| format_to_bitwidth_table[out->hal_op_format] * |
| out->config.channels; |
| out->convert_buffer = calloc(1, buffer_size); |
| if (out->convert_buffer == NULL){ |
| ALOGE("Allocation failed for convert buffer for size %d", |
| out->compr_config.fragment_size); |
| ret = -ENOMEM; |
| goto error_open; |
| } |
| ALOGD("Convert buffer allocated of size %d", buffer_size); |
| } |
| } |
| |
| ALOGV("%s devices:%d, format:%x, out->sample_rate:%d,out->bit_width:%d out->format:%d out->flags:%x, flags: %x usecase %d", |
| __func__, devices, format, out->sample_rate, out->bit_width, out->format, out->flags, flags, out->usecase); |
| |
| /* TODO remove this hardcoding and check why width is zero*/ |
| if (out->bit_width == 0) |
| out->bit_width = 16; |
| audio_extn_utils_update_stream_output_app_type_cfg(adev->platform, |
| &adev->streams_output_cfg_list, |
| devices, out->flags, format, out->sample_rate, |
| out->bit_width, out->channel_mask, out->profile, |
| &out->app_type_cfg); |
| if ((out->usecase == USECASE_AUDIO_PLAYBACK_PRIMARY) || |
| (flags & AUDIO_OUTPUT_FLAG_PRIMARY)) { |
| /* Ensure the default output is not selected twice */ |
| if(adev->primary_output == NULL) |
| adev->primary_output = out; |
| else { |
| ALOGE("%s: Primary output is already opened", __func__); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| } |
| |
| /* Check if this usecase is already existing */ |
| pthread_mutex_lock(&adev->lock); |
| if ((get_usecase_from_list(adev, out->usecase) != NULL) && |
| (out->usecase != USECASE_COMPRESS_VOIP_CALL)) { |
| ALOGE("%s: Usecase (%d) is already present", __func__, out->usecase); |
| pthread_mutex_unlock(&adev->lock); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.common.set_sample_rate = out_set_sample_rate; |
| out->stream.common.get_buffer_size = out_get_buffer_size; |
| out->stream.common.get_channels = out_get_channels; |
| out->stream.common.get_format = out_get_format; |
| out->stream.common.set_format = out_set_format; |
| out->stream.common.standby = out_standby; |
| out->stream.common.dump = out_dump; |
| out->stream.common.set_parameters = out_set_parameters; |
| out->stream.common.get_parameters = out_get_parameters; |
| out->stream.common.add_audio_effect = out_add_audio_effect; |
| out->stream.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream.get_latency = out_get_latency; |
| out->stream.set_volume = out_set_volume; |
| out->stream.write = out_write; |
| out->stream.get_render_position = out_get_render_position; |
| out->stream.get_next_write_timestamp = out_get_next_write_timestamp; |
| out->stream.get_presentation_position = out_get_presentation_position; |
| |
| out->af_period_multiplier = out->realtime ? af_period_multiplier : 1; |
| out->standby = 1; |
| /* out->muted = false; by calloc() */ |
| /* out->written = 0; by calloc() */ |
| |
| config->format = out->stream.common.get_format(&out->stream.common); |
| config->channel_mask = out->stream.common.get_channels(&out->stream.common); |
| config->sample_rate = out->stream.common.get_sample_rate(&out->stream.common); |
| |
| *stream_out = &out->stream; |
| ALOGD("%s: Stream (%p) picks up usecase (%s)", __func__, &out->stream, |
| use_case_table[out->usecase]); |
| |
| if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) |
| audio_extn_dts_notify_playback_state(out->usecase, 0, out->sample_rate, |
| popcount(out->channel_mask), out->playback_started); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| |
| error_open: |
| if (out->convert_buffer) |
| free(out->convert_buffer); |
| free(out); |
| *stream_out = NULL; |
| ALOGD("%s: exit: ret %d", __func__, ret); |
| return ret; |
| } |
| |
| void adev_close_output_stream(struct audio_hw_device *dev __unused, |
| struct audio_stream_out *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int ret = 0; |
| |
| ALOGD("%s: enter:stream_handle(%p)",__func__, out); |
| |
| if (out->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| pthread_mutex_lock(&adev->lock); |
| ret = voice_extn_compress_voip_close_output_stream(&stream->common); |
| pthread_mutex_unlock(&adev->lock); |
| if(ret != 0) |
| ALOGE("%s: Compress voip output cannot be closed, error:%d", |
| __func__, ret); |
| } else |
| out_standby(&stream->common); |
| |
| if (is_offload_usecase(out->usecase)) { |
| audio_extn_dts_remove_state_notifier_node(out->usecase); |
| destroy_offload_callback_thread(out); |
| free_offload_usecase(adev, out->usecase); |
| if (out->compr_config.codec != NULL) |
| free(out->compr_config.codec); |
| } |
| |
| if (out->convert_buffer != NULL) { |
| free(out->convert_buffer); |
| out->convert_buffer = NULL; |
| } |
| |
| if (adev->voice_tx_output == out) |
| adev->voice_tx_output = NULL; |
| |
| if (adev->primary_output == out) |
| adev->primary_output = NULL; |
| |
| pthread_cond_destroy(&out->cond); |
| pthread_mutex_destroy(&out->lock); |
| free(stream); |
| ALOGV("%s: exit", __func__); |
| } |
| |
| static void close_compress_sessions(struct audio_device *adev) |
| { |
| struct stream_out *out; |
| struct listnode *node, *tempnode; |
| struct audio_usecase *usecase; |
| pthread_mutex_lock(&adev->lock); |
| |
| list_for_each_safe(node, tempnode, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (is_offload_usecase(usecase->id)) { |
| if (usecase->stream.out) { |
| ALOGI(" %s closing compress session %d on OFFLINE state", __func__, usecase->id); |
| out = usecase->stream.out; |
| pthread_mutex_unlock(&adev->lock); |
| out_standby(&out->stream.common); |
| pthread_mutex_lock(&adev->lock); |
| tempnode = list_head(&adev->usecase_list); |
| } |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| static int adev_set_parameters(struct audio_hw_device *dev, const char *kvpairs) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *parms; |
| char value[32]; |
| int val; |
| int ret; |
| int status = 0; |
| |
| ALOGD("%s: enter: %s", __func__, kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| |
| if (!parms) |
| goto error; |
| ret = str_parms_get_str(parms, "SND_CARD_STATUS", value, sizeof(value)); |
| if (ret >= 0) { |
| char *snd_card_status = value+2; |
| if (strstr(snd_card_status, "OFFLINE")) { |
| ALOGD("Received sound card OFFLINE status"); |
| set_snd_card_state(adev,SND_CARD_STATE_OFFLINE); |
| //close compress sessions on OFFLINE status |
| close_compress_sessions(adev); |
| } else if (strstr(snd_card_status, "ONLINE")) { |
| ALOGD("Received sound card ONLINE status"); |
| set_snd_card_state(adev,SND_CARD_STATE_ONLINE); |
| //send dts hpx license if enabled |
| audio_extn_dts_eagle_send_lic(); |
| } |
| } |
| |
| pthread_mutex_lock(&adev->lock); |
| status = voice_set_parameters(adev, parms); |
| if (status != 0) |
| goto done; |
| |
| status = platform_set_parameters(adev->platform, parms); |
| if (status != 0) |
| goto done; |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_NREC, value, sizeof(value)); |
| if (ret >= 0) { |
| /* When set to false, HAL should disable EC and NS */ |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->bluetooth_nrec = true; |
| else |
| adev->bluetooth_nrec = false; |
| } |
| |
| ret = str_parms_get_str(parms, "screen_state", value, sizeof(value)); |
| if (ret >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->screen_off = false; |
| else |
| adev->screen_off = true; |
| } |
| |
| ret = str_parms_get_int(parms, "rotation", &val); |
| if (ret >= 0) { |
| bool reverse_speakers = false; |
| switch(val) { |
| // FIXME: note that the code below assumes that the speakers are in the correct placement |
| // relative to the user when the device is rotated 90deg from its default rotation. This |
| // assumption is device-specific, not platform-specific like this code. |
| case 270: |
| reverse_speakers = true; |
| break; |
| case 0: |
| case 90: |
| case 180: |
| break; |
| default: |
| ALOGE("%s: unexpected rotation of %d", __func__, val); |
| status = -EINVAL; |
| } |
| if (status == 0) { |
| if (adev->speaker_lr_swap != reverse_speakers) { |
| adev->speaker_lr_swap = reverse_speakers; |
| // only update the selected device if there is active pcm playback |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK) { |
| select_devices(adev, usecase->id); |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_SCO_WB, value, sizeof(value)); |
| if (ret >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->bt_wb_speech_enabled = true; |
| else |
| adev->bt_wb_speech_enabled = false; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_CONNECT, value, sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value); |
| if (val & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| ALOGV("cache new ext disp type and edid"); |
| ret = platform_get_ext_disp_type(adev->platform); |
| if (ret < 0) { |
| ALOGE("%s: Failed to query disp type, ret:%d", __func__, ret); |
| status = ret; |
| goto done; |
| } |
| platform_cache_edid(adev->platform); |
| } else if ((val & AUDIO_DEVICE_OUT_USB_DEVICE) || |
| !(val ^ AUDIO_DEVICE_IN_USB_DEVICE)) { |
| /* |
| * Do not allow AFE proxy port usage by WFD source when USB headset is connected. |
| * Per AudioPolicyManager, USB device is higher priority than WFD. |
| * For Voice call over USB headset, voice call audio is routed to AFE proxy ports. |
| * If WFD use case occupies AFE proxy, it may result unintended behavior while |
| * starting voice call on USB |
| */ |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| audio_extn_usb_add_device(AUDIO_DEVICE_OUT_USB_DEVICE, atoi(value)); |
| audio_extn_usb_add_device(AUDIO_DEVICE_IN_USB_DEVICE, atoi(value)); |
| } |
| ALOGV("detected USB connect .. disable proxy"); |
| adev->allow_afe_proxy_usage = false; |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_DISCONNECT, value, sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value); |
| /* |
| * The HDMI / Displayport disconnect handling has been moved to |
| * audio extension to ensure that its parameters are not |
| * invalidated prior to updating sysfs of the disconnect event |
| * Invalidate will be handled by audio_extn_ext_disp_set_parameters() |
| */ |
| if ((val & AUDIO_DEVICE_OUT_USB_DEVICE) || |
| !(val ^ AUDIO_DEVICE_IN_USB_DEVICE)) { |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| audio_extn_usb_remove_device(AUDIO_DEVICE_OUT_USB_DEVICE, atoi(value)); |
| audio_extn_usb_remove_device(AUDIO_DEVICE_IN_USB_DEVICE, atoi(value)); |
| } |
| ALOGV("detected USB disconnect .. enable proxy"); |
| adev->allow_afe_proxy_usage = true; |
| } |
| } |
| |
| ret = str_parms_get_str(parms,"reconfigA2dp", value, sizeof(value)); |
| if (ret >= 0) { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if ((usecase->type == PCM_PLAYBACK) && |
| (usecase->devices & AUDIO_DEVICE_OUT_ALL_A2DP)){ |
| ALOGD("reconfigure a2dp... forcing device switch"); |
| lock_output_stream(usecase->stream.out); |
| audio_extn_a2dp_set_handoff_mode(true); |
| //force device switch to re configure encoder |
| select_devices(adev, usecase->id); |
| audio_extn_a2dp_set_handoff_mode(false); |
| pthread_mutex_unlock(&usecase->stream.out->lock); |
| break; |
| } |
| } |
| } |
| |
| //handle vr audio setparam |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_VR_AUDIO_MODE, |
| value, sizeof(value)); |
| if (ret >= 0) { |
| ALOGI("Setting vr mode to be %s", value); |
| if (!strncmp(value, "true", 4)) { |
| adev->vr_audio_mode_enabled = true; |
| ALOGI("Setting vr mode to true"); |
| } else if (!strncmp(value, "false", 5)) { |
| adev->vr_audio_mode_enabled = false; |
| ALOGI("Setting vr mode to false"); |
| } else { |
| ALOGI("wrong vr mode set"); |
| } |
| } |
| |
| audio_extn_set_parameters(adev, parms); |
| done: |
| str_parms_destroy(parms); |
| pthread_mutex_unlock(&adev->lock); |
| error: |
| ALOGV("%s: exit with code(%d)", __func__, status); |
| return status; |
| } |
| |
| static char* adev_get_parameters(const struct audio_hw_device *dev, |
| const char *keys) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *reply = str_parms_create(); |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| char value[256] = {0}; |
| int ret = 0; |
| |
| if (!query || !reply) { |
| if (reply) { |
| str_parms_destroy(reply); |
| } |
| if (query) { |
| str_parms_destroy(query); |
| } |
| ALOGE("adev_get_parameters: failed to create query or reply"); |
| return NULL; |
| } |
| |
| ret = str_parms_get_str(query, "SND_CARD_STATUS", value, |
| sizeof(value)); |
| if (ret >=0) { |
| int val = 1; |
| pthread_mutex_lock(&adev->snd_card_status.lock); |
| if (SND_CARD_STATE_OFFLINE == adev->snd_card_status.state) |
| val = 0; |
| pthread_mutex_unlock(&adev->snd_card_status.lock); |
| str_parms_add_int(reply, "SND_CARD_STATUS", val); |
| goto exit; |
| } |
| //handle vr audio getparam |
| |
| ret = str_parms_get_str(query, |
| AUDIO_PARAMETER_KEY_VR_AUDIO_MODE, |
| value, sizeof(value)); |
| |
| if (ret >= 0) { |
| bool vr_audio_enabled = false; |
| pthread_mutex_lock(&adev->lock); |
| vr_audio_enabled = adev->vr_audio_mode_enabled; |
| pthread_mutex_unlock(&adev->lock); |
| |
| ALOGI("getting vr mode to %d", vr_audio_enabled); |
| |
| if (vr_audio_enabled) { |
| str_parms_add_str(reply, AUDIO_PARAMETER_KEY_VR_AUDIO_MODE, |
| "true"); |
| goto exit; |
| } else { |
| str_parms_add_str(reply, AUDIO_PARAMETER_KEY_VR_AUDIO_MODE, |
| "false"); |
| goto exit; |
| } |
| } |
| |
| pthread_mutex_lock(&adev->lock); |
| audio_extn_get_parameters(adev, query, reply); |
| voice_get_parameters(adev, query, reply); |
| platform_get_parameters(adev->platform, query, reply); |
| pthread_mutex_unlock(&adev->lock); |
| |
| exit: |
| str = str_parms_to_str(reply); |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static int adev_init_check(const struct audio_hw_device *dev __unused) |
| { |
| return 0; |
| } |
| |
| static int adev_set_voice_volume(struct audio_hw_device *dev, float volume) |
| { |
| int ret; |
| struct audio_device *adev = (struct audio_device *)dev; |
| pthread_mutex_lock(&adev->lock); |
| /* cache volume */ |
| ret = voice_set_volume(adev, volume); |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int adev_set_master_volume(struct audio_hw_device *dev __unused, |
| float volume __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_volume(struct audio_hw_device *dev __unused, |
| float *volume __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_master_mute(struct audio_hw_device *dev __unused, |
| bool muted __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_mute(struct audio_hw_device *dev __unused, |
| bool *muted __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_mode(struct audio_hw_device *dev, audio_mode_t mode) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (adev->mode != mode) { |
| ALOGD("%s: mode %d\n", __func__, mode); |
| adev->mode = mode; |
| if ((mode == AUDIO_MODE_NORMAL) && voice_is_in_call(adev)) { |
| voice_stop_call(adev); |
| platform_set_gsm_mode(adev->platform, false); |
| adev->current_call_output = NULL; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return 0; |
| } |
| |
| static int adev_set_mic_mute(struct audio_hw_device *dev, bool state) |
| { |
| int ret; |
| |
| pthread_mutex_lock(&adev->lock); |
| ALOGD("%s state %d\n", __func__, state); |
| ret = voice_set_mic_mute((struct audio_device *)dev, state); |
| pthread_mutex_unlock(&adev->lock); |
| |
| return ret; |
| } |
| |
| static int adev_get_mic_mute(const struct audio_hw_device *dev, bool *state) |
| { |
| *state = voice_get_mic_mute((struct audio_device *)dev); |
| return 0; |
| } |
| |
| static size_t adev_get_input_buffer_size(const struct audio_hw_device *dev __unused, |
| const struct audio_config *config) |
| { |
| int channel_count = audio_channel_count_from_in_mask(config->channel_mask); |
| |
| return get_input_buffer_size(config->sample_rate, config->format, channel_count, |
| false /* is_low_latency: since we don't know, be conservative */); |
| } |
| |
| static int adev_open_input_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| struct audio_config *config, |
| struct audio_stream_in **stream_in, |
| audio_input_flags_t flags, |
| const char *address __unused, |
| audio_source_t source) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_in *in; |
| int ret = 0, buffer_size, frame_size; |
| int channel_count = audio_channel_count_from_in_mask(config->channel_mask); |
| bool is_low_latency = false; |
| bool channel_mask_updated = false; |
| |
| *stream_in = NULL; |
| if (check_input_parameters(config->sample_rate, config->format, channel_count) != 0) { |
| ALOGE("%s: invalid input parameters", __func__); |
| return -EINVAL; |
| } |
| |
| in = (struct stream_in *)calloc(1, sizeof(struct stream_in)); |
| |
| if (!in) { |
| ALOGE("failed to allocate input stream"); |
| return -ENOMEM; |
| } |
| |
| ALOGD("%s: enter: sample_rate(%d) channel_mask(%#x) devices(%#x)\ |
| stream_handle(%p) io_handle(%d) source(%d) format %x",__func__, config->sample_rate, |
| config->channel_mask, devices, &in->stream, handle, source, config->format); |
| pthread_mutex_init(&in->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_mutex_init(&in->pre_lock, (const pthread_mutexattr_t *) NULL); |
| |
| in->stream.common.get_sample_rate = in_get_sample_rate; |
| in->stream.common.set_sample_rate = in_set_sample_rate; |
| in->stream.common.get_buffer_size = in_get_buffer_size; |
| in->stream.common.get_channels = in_get_channels; |
| in->stream.common.get_format = in_get_format; |
| in->stream.common.set_format = in_set_format; |
| in->stream.common.standby = in_standby; |
| in->stream.common.dump = in_dump; |
| in->stream.common.set_parameters = in_set_parameters; |
| in->stream.common.get_parameters = in_get_parameters; |
| in->stream.common.add_audio_effect = in_add_audio_effect; |
| in->stream.common.remove_audio_effect = in_remove_audio_effect; |
| in->stream.set_gain = in_set_gain; |
| in->stream.read = in_read; |
| in->stream.get_input_frames_lost = in_get_input_frames_lost; |
| |
| in->device = devices; |
| in->source = source; |
| in->dev = adev; |
| in->standby = 1; |
| in->channel_mask = config->channel_mask; |
| in->capture_handle = handle; |
| in->flags = flags; |
| |
| in->usecase = USECASE_AUDIO_RECORD; |
| if (config->sample_rate == LOW_LATENCY_CAPTURE_SAMPLE_RATE && |
| (flags & AUDIO_INPUT_FLAG_FAST) != 0) { |
| is_low_latency = true; |
| #if LOW_LATENCY_CAPTURE_USE_CASE |
| in->usecase = USECASE_AUDIO_RECORD_LOW_LATENCY; |
| #endif |
| in->realtime = may_use_noirq_mode(adev, in->usecase, in->flags); |
| } |
| |
| in->format = config->format; |
| if (in->realtime) { |
| in->config = pcm_config_audio_capture_rt; |
| in->sample_rate = in->config.rate; |
| in->af_period_multiplier = af_period_multiplier; |
| } else { |
| in->config = pcm_config_audio_capture; |
| in->config.rate = config->sample_rate; |
| in->sample_rate = config->sample_rate; |
| in->af_period_multiplier = 1; |
| } |
| in->bit_width = 16; |
| |
| /* restrict 24 bit capture for unprocessed source only |
| * for other sources if 24 bit requested reject 24 and set 16 bit capture only |
| */ |
| if (config->format == AUDIO_FORMAT_DEFAULT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| } else if ((config->format == AUDIO_FORMAT_PCM_FLOAT) || |
| (config->format == AUDIO_FORMAT_PCM_32_BIT) || |
| (config->format == AUDIO_FORMAT_PCM_24_BIT_PACKED) || |
| (config->format == AUDIO_FORMAT_PCM_8_24_BIT)) { |
| bool ret_error = false; |
| in->bit_width = 24; |
| /* 24 bit is restricted to UNPROCESSED source only,also format supported |
| from HAL is 24_packed and 8_24 |
| *> In case of UNPROCESSED source, for 24 bit, if format requested is other than |
| 24_packed return error indicating supported format is 24_packed |
| *> In case of any other source requesting 24 bit or float return error |
| indicating format supported is 16 bit only. |
| |
| on error flinger will retry with supported format passed |
| */ |
| if ((source != AUDIO_SOURCE_UNPROCESSED) && |
| (source != AUDIO_SOURCE_CAMCORDER)) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| if (config->sample_rate > 48000) |
| config->sample_rate = 48000; |
| ret_error = true; |
| } else if (config->format == AUDIO_FORMAT_PCM_24_BIT_PACKED) { |
| in->config.format = PCM_FORMAT_S24_3LE; |
| } else if (config->format == AUDIO_FORMAT_PCM_8_24_BIT) { |
| in->config.format = PCM_FORMAT_S24_LE; |
| } else { |
| config->format = AUDIO_FORMAT_PCM_24_BIT_PACKED; |
| ret_error = true; |
| } |
| |
| if (ret_error) { |
| ret = -EINVAL; |
| goto err_open; |
| } |
| } |
| |
| /* Update config params with the requested sample rate and channels */ |
| if ((in->device == AUDIO_DEVICE_IN_TELEPHONY_RX) && |
| (adev->mode != AUDIO_MODE_IN_CALL)) { |
| ret = -EINVAL; |
| goto err_open; |
| } |
| |
| if ((in->device == AUDIO_DEVICE_IN_TELEPHONY_RX) || |
| (in->device == AUDIO_DEVICE_IN_PROXY)) { |
| if (config->sample_rate == 0) |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| if (config->sample_rate != 48000 && config->sample_rate != 16000 && |
| config->sample_rate != 8000) { |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| ret = -EINVAL; |
| goto err_open; |
| } |
| if (config->format == AUDIO_FORMAT_DEFAULT) |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| if (config->format != AUDIO_FORMAT_PCM_16_BIT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| ret = -EINVAL; |
| goto err_open; |
| } |
| |
| in->usecase = USECASE_AUDIO_RECORD_AFE_PROXY; |
| in->config = pcm_config_afe_proxy_record; |
| in->config.channels = channel_count; |
| in->config.rate = config->sample_rate; |
| in->sample_rate = config->sample_rate; |
| } else if (!audio_extn_check_and_set_multichannel_usecase(adev, |
| in, config, &channel_mask_updated)) { |
| if (channel_mask_updated == true) { |
| ALOGD("%s: return error to retry with updated channel mask (%#x)", |
| __func__, config->channel_mask); |
| ret = -EINVAL; |
| goto err_open; |
| } |
| ALOGD("%s: created surround sound session succesfully",__func__); |
| } else if (audio_extn_compr_cap_enabled() && |
| audio_extn_compr_cap_format_supported(config->format) && |
| (in->dev->mode != AUDIO_MODE_IN_COMMUNICATION)) { |
| audio_extn_compr_cap_init(in); |
| } else if (audio_extn_cin_applicable_stream(in)) { |
| ret = audio_extn_cin_configure_input_stream(in); |
| if (ret) |
| goto err_open; |
| } else { |
| in->config.channels = channel_count; |
| if (!in->realtime) { |
| in->format = config->format; |
| frame_size = audio_stream_in_frame_size(&in->stream); |
| buffer_size = get_input_buffer_size(config->sample_rate, |
| config->format, |
| channel_count, |
| is_low_latency); |
| in->config.period_size = buffer_size / frame_size; |
| } |
| |
| if ((in->source == AUDIO_SOURCE_VOICE_COMMUNICATION) && |
| (in->dev->mode == AUDIO_MODE_IN_COMMUNICATION || voice_extn_compress_voip_is_active(in->dev)) && |
| (voice_extn_compress_voip_is_format_supported(in->format)) && |
| (in->config.rate == 8000 || in->config.rate == 16000 || |
| in->config.rate == 32000 || in->config.rate == 48000) && |
| (audio_channel_count_from_in_mask(in->channel_mask) == 1)) { |
| voice_extn_compress_voip_open_input_stream(in); |
| } |
| } |
| |
| audio_extn_utils_update_stream_input_app_type_cfg(adev->platform, |
| &adev->streams_input_cfg_list, |
| devices, flags, in->format, in->sample_rate, |
| in->bit_width, in->profile, &in->app_type_cfg); |
| |
| /* This stream could be for sound trigger lab, |
| get sound trigger pcm if present */ |
| audio_extn_sound_trigger_check_and_get_session(in); |
| |
| *stream_in = &in->stream; |
| ALOGV("%s: exit", __func__); |
| return ret; |
| |
| err_open: |
| free(in); |
| *stream_in = NULL; |
| return ret; |
| } |
| |
| static void adev_close_input_stream(struct audio_hw_device *dev, |
| struct audio_stream_in *stream) |
| { |
| int ret; |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = (struct audio_device *)dev; |
| |
| ALOGD("%s: enter:stream_handle(%p)",__func__, in); |
| |
| /* Disable echo reference while closing input stream */ |
| platform_set_echo_reference(adev, false, AUDIO_DEVICE_NONE); |
| |
| if (in->usecase == USECASE_COMPRESS_VOIP_CALL) { |
| pthread_mutex_lock(&adev->lock); |
| ret = voice_extn_compress_voip_close_input_stream(&stream->common); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) |
| ALOGE("%s: Compress voip input cannot be closed, error:%d", |
| __func__, ret); |
| } else |
| in_standby(&stream->common); |
| |
| if (audio_extn_ssr_get_stream() == in) { |
| audio_extn_ssr_deinit(); |
| } |
| |
| if (audio_extn_compr_cap_enabled() && |
| audio_extn_compr_cap_format_supported(in->config.format)) |
| audio_extn_compr_cap_deinit(); |
| |
| if (audio_extn_cin_attached_usecase(in->usecase)) |
| audio_extn_cin_close_input_stream(in); |
| |
| if (in->is_st_session) { |
| ALOGV("%s: sound trigger pcm stop lab", __func__); |
| audio_extn_sound_trigger_stop_lab(in); |
| } |
| free(stream); |
| return; |
| } |
| |
| static int adev_dump(const audio_hw_device_t *device __unused, |
| int fd __unused) |
| { |
| return 0; |
| } |
| |
| static int adev_close(hw_device_t *device) |
| { |
| struct audio_device *adev = (struct audio_device *)device; |
| |
| if (!adev) |
| return 0; |
| |
| pthread_mutex_lock(&adev_init_lock); |
| |
| if ((--audio_device_ref_count) == 0) { |
| audio_extn_sound_trigger_deinit(adev); |
| audio_extn_listen_deinit(adev); |
| audio_extn_utils_release_streams_cfg_lists( |
| &adev->streams_output_cfg_list, |
| &adev->streams_input_cfg_list); |
| if (audio_extn_qaf_is_enabled()) |
| audio_extn_qaf_deinit(); |
| audio_route_free(adev->audio_route); |
| audio_extn_gef_deinit(); |
| free(adev->snd_dev_ref_cnt); |
| platform_deinit(adev->platform); |
| if (adev->adm_deinit) |
| adev->adm_deinit(adev->adm_data); |
| qahwi_deinit(device); |
| free(device); |
| adev = NULL; |
| } |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| return 0; |
| } |
| |
| /* This returns 1 if the input parameter looks at all plausible as a low latency period size, |
| * or 0 otherwise. A return value of 1 doesn't mean the value is guaranteed to work, |
| * just that it _might_ work. |
| */ |
| static int period_size_is_plausible_for_low_latency(int period_size) |
| { |
| switch (period_size) { |
| case 160: |
| case 192: |
| case 240: |
| case 320: |
| case 480: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int adev_open(const hw_module_t *module, const char *name, |
| hw_device_t **device) |
| { |
| int ret; |
| |
| ALOGD("%s: enter", __func__); |
| if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0) return -EINVAL; |
| |
| pthread_mutex_lock(&adev_init_lock); |
| if (audio_device_ref_count != 0){ |
| *device = &adev->device.common; |
| audio_device_ref_count++; |
| ALOGD("%s: returning existing instance of adev", __func__); |
| ALOGD("%s: exit", __func__); |
| pthread_mutex_unlock(&adev_init_lock); |
| return 0; |
| } |
| |
| adev = calloc(1, sizeof(struct audio_device)); |
| |
| if (!adev) { |
| pthread_mutex_unlock(&adev_init_lock); |
| return -ENOMEM; |
| } |
| |
| pthread_mutex_init(&adev->lock, (const pthread_mutexattr_t *) NULL); |
| |
| adev->device.common.tag = HARDWARE_DEVICE_TAG; |
| adev->device.common.version = AUDIO_DEVICE_API_VERSION_2_0; |
| adev->device.common.module = (struct hw_module_t *)module; |
| adev->device.common.close = adev_close; |
| |
| adev->device.init_check = adev_init_check; |
| adev->device.set_voice_volume = adev_set_voice_volume; |
| adev->device.set_master_volume = adev_set_master_volume; |
| adev->device.get_master_volume = adev_get_master_volume; |
| adev->device.set_master_mute = adev_set_master_mute; |
| adev->device.get_master_mute = adev_get_master_mute; |
| adev->device.set_mode = adev_set_mode; |
| adev->device.set_mic_mute = adev_set_mic_mute; |
| adev->device.get_mic_mute = adev_get_mic_mute; |
| adev->device.set_parameters = adev_set_parameters; |
| adev->device.get_parameters = adev_get_parameters; |
| adev->device.get_input_buffer_size = adev_get_input_buffer_size; |
| adev->device.open_output_stream = adev_open_output_stream; |
| adev->device.close_output_stream = adev_close_output_stream; |
| adev->device.open_input_stream = adev_open_input_stream; |
| adev->device.close_input_stream = adev_close_input_stream; |
| adev->device.dump = adev_dump; |
| |
| /* Set the default route before the PCM stream is opened */ |
| adev->mode = AUDIO_MODE_NORMAL; |
| adev->active_input = NULL; |
| adev->primary_output = NULL; |
| adev->out_device = AUDIO_DEVICE_NONE; |
| adev->bluetooth_nrec = true; |
| adev->acdb_settings = TTY_MODE_OFF; |
| adev->allow_afe_proxy_usage = true; |
| /* adev->cur_hdmi_channels = 0; by calloc() */ |
| adev->snd_dev_ref_cnt = calloc(SND_DEVICE_MAX, sizeof(int)); |
| voice_init(adev); |
| list_init(&adev->usecase_list); |
| adev->cur_wfd_channels = 2; |
| adev->offload_usecases_state = 0; |
| adev->is_channel_status_set = false; |
| adev->perf_lock_opts[0] = 0x101; |
| adev->perf_lock_opts[1] = 0x20E; |
| adev->perf_lock_opts_size = 2; |
| |
| pthread_mutex_init(&adev->snd_card_status.lock, (const pthread_mutexattr_t *) NULL); |
| adev->snd_card_status.state = SND_CARD_STATE_OFFLINE; |
| /* Loads platform specific libraries dynamically */ |
| adev->platform = platform_init(adev); |
| if (!adev->platform) { |
| free(adev->snd_dev_ref_cnt); |
| free(adev); |
| ALOGE("%s: Failed to init platform data, aborting.", __func__); |
| *device = NULL; |
| pthread_mutex_unlock(&adev_init_lock); |
| pthread_mutex_destroy(&adev->lock); |
| pthread_mutex_destroy(&adev->snd_card_status.lock); |
| return -EINVAL; |
| } |
| |
| if (audio_extn_qaf_is_enabled()) { |
| ret = audio_extn_qaf_init(adev); |
| if (ret < 0) { |
| free(adev); |
| ALOGE("%s: Failed to init platform data, aborting.", __func__); |
| *device = NULL; |
| pthread_mutex_unlock(&adev_init_lock); |
| pthread_mutex_destroy(&adev->lock); |
| return ret; |
| } |
| |
| adev->device.open_output_stream = audio_extn_qaf_open_output_stream; |
| adev->device.close_output_stream = audio_extn_qaf_close_output_stream; |
| } |
| |
| adev->snd_card_status.state = SND_CARD_STATE_ONLINE; |
| |
| if (access(VISUALIZER_LIBRARY_PATH, R_OK) == 0) { |
| adev->visualizer_lib = dlopen(VISUALIZER_LIBRARY_PATH, RTLD_NOW); |
| if (adev->visualizer_lib == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| adev->visualizer_start_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_start_output"); |
| adev->visualizer_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_stop_output"); |
| } |
| } |
| audio_extn_init(adev); |
| audio_extn_listen_init(adev, adev->snd_card); |
| audio_extn_sound_trigger_init(adev); |
| audio_extn_gef_init(adev); |
| |
| if (access(OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH, R_OK) == 0) { |
| adev->offload_effects_lib = dlopen(OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH, RTLD_NOW); |
| if (adev->offload_effects_lib == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| adev->offload_effects_start_output = |
| (int (*)(audio_io_handle_t, int, struct mixer *))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_start_output"); |
| adev->offload_effects_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_stop_output"); |
| adev->offload_effects_set_hpx_state = |
| (int (*)(bool))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_set_hpx_state"); |
| adev->offload_effects_get_parameters = |
| (void (*)(struct str_parms *, struct str_parms *)) |
| dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_get_parameters"); |
| adev->offload_effects_set_parameters = |
| (void (*)(struct str_parms *))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_set_parameters"); |
| } |
| } |
| |
| if (access(ADM_LIBRARY_PATH, R_OK) == 0) { |
| adev->adm_lib = dlopen(ADM_LIBRARY_PATH, RTLD_NOW); |
| if (adev->adm_lib == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, ADM_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, ADM_LIBRARY_PATH); |
| adev->adm_init = (adm_init_t) |
| dlsym(adev->adm_lib, "adm_init"); |
| adev->adm_deinit = (adm_deinit_t) |
| dlsym(adev->adm_lib, "adm_deinit"); |
| adev->adm_register_input_stream = (adm_register_input_stream_t) |
| dlsym(adev->adm_lib, "adm_register_input_stream"); |
| adev->adm_register_output_stream = (adm_register_output_stream_t) |
| dlsym(adev->adm_lib, "adm_register_output_stream"); |
| adev->adm_deregister_stream = (adm_deregister_stream_t) |
| dlsym(adev->adm_lib, "adm_deregister_stream"); |
| adev->adm_request_focus = (adm_request_focus_t) |
| dlsym(adev->adm_lib, "adm_request_focus"); |
| adev->adm_abandon_focus = (adm_abandon_focus_t) |
| dlsym(adev->adm_lib, "adm_abandon_focus"); |
| adev->adm_set_config = (adm_set_config_t) |
| dlsym(adev->adm_lib, "adm_set_config"); |
| adev->adm_request_focus_v2 = (adm_request_focus_v2_t) |
| dlsym(adev->adm_lib, "adm_request_focus_v2"); |
| adev->adm_is_noirq_avail = (adm_is_noirq_avail_t) |
| dlsym(adev->adm_lib, "adm_is_noirq_avail"); |
| adev->adm_on_routing_change = (adm_on_routing_change_t) |
| dlsym(adev->adm_lib, "adm_on_routing_change"); |
| } |
| } |
| |
| adev->bt_wb_speech_enabled = false; |
| //initialize this to false for now, |
| //this will be set to true through set param |
| adev->vr_audio_mode_enabled = false; |
| |
| audio_extn_ds2_enable(adev); |
| *device = &adev->device.common; |
| |
| audio_extn_utils_update_streams_cfg_lists(adev->platform, adev->mixer, |
| &adev->streams_output_cfg_list, |
| &adev->streams_input_cfg_list); |
| |
| audio_device_ref_count++; |
| |
| char value[PROPERTY_VALUE_MAX]; |
| int trial; |
| if (property_get("audio_hal.period_size", value, NULL) > 0) { |
| trial = atoi(value); |
| if (period_size_is_plausible_for_low_latency(trial)) { |
| pcm_config_low_latency.period_size = trial; |
| pcm_config_low_latency.start_threshold = trial / 4; |
| pcm_config_low_latency.avail_min = trial / 4; |
| configured_low_latency_capture_period_size = trial; |
| } |
| } |
| if (property_get("audio_hal.in_period_size", value, NULL) > 0) { |
| trial = atoi(value); |
| if (period_size_is_plausible_for_low_latency(trial)) { |
| configured_low_latency_capture_period_size = trial; |
| } |
| } |
| |
| if (property_get("audio_hal.period_multiplier", value, NULL) > 0) { |
| af_period_multiplier = atoi(value); |
| if (af_period_multiplier < 0) |
| af_period_multiplier = 2; |
| else if (af_period_multiplier > 4) |
| af_period_multiplier = 4; |
| |
| ALOGV("new period_multiplier = %d", af_period_multiplier); |
| } |
| |
| adev->multi_offload_enable = property_get_bool("audio.offload.multiple.enabled", false); |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| if (adev->adm_init) |
| adev->adm_data = adev->adm_init(); |
| |
| qahwi_init(*device); |
| audio_extn_perf_lock_init(); |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| static struct hw_module_methods_t hal_module_methods = { |
| .open = adev_open, |
| }; |
| |
| struct audio_module HAL_MODULE_INFO_SYM = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = AUDIO_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = AUDIO_HARDWARE_MODULE_ID, |
| .name = "QCOM Audio HAL", |
| .author = "The Linux Foundation", |
| .methods = &hal_module_methods, |
| }, |
| }; |