configs/kalama/kalama.mk - LeafOS-Project/android_hardware_qcom_audio-ar - Gitiles

 AUDIO_HAL_DIR := hardware/qcom-caf/sm8550/audio/primary-hal

 # Audio product definitions
 include $(AUDIO_HAL_DIR)/configs/kalama/audio-modules.mk
 PRODUCT_PACKAGES += $(AUDIO_MODULES)

 #BOARD_USES_GENERIC_AUDIO := true
 #
 #AUDIO_FEATURE_FLAGS
 ifeq ($(TARGET_USES_QMAA_OVERRIDE_AUDIO), false)
 ifeq ($(TARGET_USES_QMAA),true)
 AUDIO_USE_STUB_HAL := true
 endif
 endif

 ifneq ($(AUDIO_USE_STUB_HAL), true)
 BOARD_USES_ALSA_AUDIO := true
 TARGET_USES_AOSP_FOR_AUDIO := false

 ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
 USE_CUSTOM_AUDIO_POLICY := 1
 AUDIO_FEATURE_QSSI_COMPLIANCE := true
 AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
 AUDIO_FEATURE_ENABLED_COMPRESS_INPUT := true
 AUDIO_FEATURE_ENABLED_CONCURRENT_CAPTURE := true
 AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := false
 AUDIO_FEATURE_ENABLED_DYNAMIC_ECNS := true
 AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
 AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
 AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
 AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
 AUDIO_FEATURE_ENABLED_HDMI_SPK := true
 AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
 AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_MPEGH_SW_DECODER := true
 AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
 AUDIO_FEATURE_ENABLED_SSR := true
 AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
 AUDIO_FEATURE_ENABLED_PAL_HIDL := true
 AUDIO_FEATURE_ENABLED_AGM_HIDL := true
 AUDIO_FEATURE_ENABLED_LSM_HIDL := true
 BOARD_USES_SRS_TRUEMEDIA := false
 DTS_CODEC_M_ := false
 MM_AUDIO_ENABLED_SAFX := false
 AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
 AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
 AUDIO_FEATURE_ENABLED_USB_TUNNEL := true
 AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_3D_AUDIO := true
 AUDIO_FEATURE_ENABLED_AHAL_EXT := false
 AUDIO_FEATURE_ENABLED_EXTENDED_COMPRESS_FORMAT := true
 DOLBY_ENABLE := false
 AUDIO_FEATURE_ENABLED_SPATIAL_AUDIO := true
 endif

 AUDIO_FEATURE_ENABLED_DLKM := true
 BOARD_SUPPORTS_SOUND_TRIGGER := true
 BOARD_SUPPORTS_GCS := false
 AUDIO_FEATURE_ENABLED_INSTANCE_ID := true
 AUDIO_USE_DEEP_AS_PRIMARY_OUTPUT := false
 AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
 AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
 AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
 AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
 AUDIO_FEATURE_ENABLED_FLUENCE := true
 AUDIO_FEATURE_ENABLED_HDMI_EDID := true
 AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH := true
 #AUDIO_FEATURE_ENABLED_KEEP_ALIVE := true
 AUDIO_FEATURE_ENABLED_DISPLAY_PORT := true
 AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := false
 AUDIO_FEATURE_ENABLED_HFP := true
 AUDIO_FEATURE_ENABLED_INCALL_MUSIC := true
 AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
 AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
 AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
 AUDIO_FEATURE_ENABLED_ACDB_LICENSE := false
 AUDIO_FEATURE_ENABLED_DEV_ARBI := false
 AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := true
 MM_AUDIO_ENABLED_FTM := true
 TARGET_USES_QCOM_MM_AUDIO := true
 AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
 AUDIO_FEATURE_ENABLED_GEF_SUPPORT := true
 BOARD_SUPPORTS_QAHW := false
 AUDIO_FEATURE_ENABLED_RAS := true
 AUDIO_FEATURE_ENABLED_SND_MONITOR := true
 AUDIO_FEATURE_ENABLED_USB_BURST_MODE := true
 AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
 AUDIO_FEATURE_ENABLED_BATTERY_LISTENER := true
 BUILD_AUDIO_TECHPACK_SOURCE := true
 AUDIO_FEATURE_ENABLED_MCS := true
 ##AUDIO_FEATURE_FLAGS
 BOARD_SUPPORTS_OPENSOURCE_STHAL := true

 ifneq ($(strip $(TARGET_USES_RRO)), true)
 #Audio Specific device overlays
 DEVICE_PACKAGE_OVERLAYS += $(AUDIO_HAL_DIR)/configs/common/overlay
 endif
 PRODUCT_PACKAGES += fai__2.7.5_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
 PRODUCT_PACKAGES += fai__4.8.2_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
 PRODUCT_PACKAGES += fai__2.6.3_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
 PRODUCT_PACKAGES += fai__2.0.0_0.1__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.7_enpu3.pmd
 PRODUCT_PACKAGES += fai__2.6.5_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__4.8.3_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__3.0.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.6.5_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__4.8.4_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.6.3_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.7.5_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
 PRODUCT_PACKAGES += fai__4.8.4_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd

 # Audio configuration xml's related to Kailua
 QCV_FAMILY_SKUS := kalama
 DEVICE_SKU := kalama

 CONFIG_PAL_SRC_DIR := vendor/qcom/opensource/pal/configs/kalama
 CONFIG_HAL_SRC_DIR := $(AUDIO_HAL_DIR)/configs/kalama
 CONFIG_SKU_OUT_DIR := $(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_$(DEVICE_SKU)

 PRODUCT_COPY_FILES += \
     $(CONFIG_HAL_SRC_DIR)/audio_effects.conf:$(CONFIG_SKU_OUT_DIR)/audio_effects.conf \
     $(CONFIG_HAL_SRC_DIR)/audio_effects.xml:$(CONFIG_SKU_OUT_DIR)/audio_effects.xml \
     $(CONFIG_HAL_SRC_DIR)/microphone_characteristics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/microphone_characteristics.xml \
     $(CONFIG_PAL_SRC_DIR)/card-defs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/card-defs.xml \
     $(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_qrd.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_qrd.xml \
     $(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_mtp.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_mtp.xml \
     $(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_cdp.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_cdp.xml \
     $(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_cdp_wsa883x.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_cdp_wsa883x.xml \
     $(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_grd.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_grd.xml \
     $(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_qrd.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_qrd.xml \
     $(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_mtp.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_mtp.xml \
     $(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_cdp.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_cdp.xml \
     $(CONFIG_PAL_SRC_DIR)/usecaseKvManager.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usecaseKvManager.xml \
     $(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_grd.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_grd.xml \
     $(AUDIO_HAL_DIR)/configs/common/media_codecs_vendor_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_vendor_audio.xml \
     frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml \
     frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml

 #XML Audio configuration files
 ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
 PRODUCT_COPY_FILES += \
     $(CONFIG_HAL_SRC_DIR)/audio_policy_configuration.xml:$(CONFIG_SKU_OUT_DIR)/audio_policy_configuration.xml

 #Audio configuration xml's common to Kalama family
 PRODUCT_COPY_FILES += \
 $(foreach DEVICE_SKU, $(QCV_FAMILY_SKUS), \
     $(CONFIG_HAL_SRC_DIR)/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_$(DEVICE_SKU)_qssi/audio_policy_configuration.xml)

 endif
 PRODUCT_COPY_FILES += \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
     $(TOPDIR)frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
     $(TOPDIR)frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
     $(TOPDIR)frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
     $(TOPDIR)frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
     $(TOPDIR)frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/bluetooth_qti_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_audio_policy_configuration.xml \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/bluetooth_qti_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_hearing_aid_audio_policy_configuration.xml

 PRODUCT_COPY_FILES += \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/media_codecs_c2_audio.xml:vendor/etc/media_codecs_c2_audio.xml \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.base-arm.policy:vendor/etc/seccomp_policy/c2audio.vendor.base-arm.policy \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.base-arm64.policy:vendor/etc/seccomp_policy/c2audio.vendor.base-arm64.policy \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.ext-arm.policy:vendor/etc/seccomp_policy/c2audio.vendor.ext-arm.policy \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.ext-arm64.policy:vendor/etc/seccomp_policy/c2audio.vendor.ext-arm64.policy

 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_COPY_FILES += \
     $(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/init.qti.audio.debug.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qti.audio.debug.sh
 endif

 # Reduce client buffer size for fast audio output tracks
 PRODUCT_VENDOR_PROPERTIES += \
     af.fast_track_multiplier=1

 # Reduce AF standby time for playback threads (except offload)
 PRODUCT_VENDOR_PROPERTIES += \
    ro.audio.flinger_standbytime_ms=2000

 # Low latency audio buffer size in frames
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.audio_hal.period_size=192

 # period multiplier for low latency capture tracks
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.audio.ull_record_period_multiplier=2

 ##Ambisonic Capture
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.ambisonic.capture=false \
 persist.vendor.audio.ambisonic.auto.profile=false

 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.apptype.multirec.enabled=false

 ##fluencetype can be "fluence" or "fluencepro" or "none"
 PRODUCT_VENDOR_PROPERTIES += \
 ro.vendor.audio.sdk.fluencetype=none\
 persist.vendor.audio.fluence.voicecall=true\
 persist.vendor.audio.fluence.voicerec=false\
 persist.vendor.audio.fluence.speaker=true\
 persist.vendor.audio.fluence.tmic.enabled=false

 #
 #snapdragon value add features
 #
 PRODUCT_VENDOR_PROPERTIES += \
 ro.qc.sdk.audio.ssr=false

 ##fluencetype can be "fluence" or "fluencepro" or "none"
 PRODUCT_VENDOR_PROPERTIES += \
 ro.qc.sdk.audio.fluencetype=none\
 persist.audio.fluence.voicecall=true\
 persist.audio.fluence.voicerec=false\
 persist.audio.fluence.speaker=true

 ##speaker protection v3 switch and ADSP AFE API version
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.spv3.enable=true\
 persist.vendor.audio.avs.afe_api_version=2

 #disable tunnel encoding
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.tunnel.encode=false

 #Disable RAS Feature by default
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.ras.enabled=false

 #Buffer size in kbytes for compress offload playback
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.buffer.size.kb=32

 #Enable offload audio video playback by default
 PRODUCT_VENDOR_PROPERTIES += \
 audio.offload.video=true

 #Enable audio track offload by default
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.track.enable=true

 #Enable music through deep buffer
 PRODUCT_VENDOR_PROPERTIES += \
 audio.deep_buffer.media=true

 #enable voice path for PCM VoIP by default
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.voice.path.for.pcm.voip=true

 #Enable multi channel aac through offload
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.multiaac.enable=true

 #Enable DS2, Hardbypass feature for Dolby
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.dolby.ds2.enabled=false\
 vendor.audio.dolby.ds2.hardbypass=false

 #Disable Multiple offload sesison
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.multiple.enabled=false

 #Disable Compress passthrough playback
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.passthrough=false

 #Disable surround sound recording
 PRODUCT_VENDOR_PROPERTIES += \
 ro.vendor.audio.sdk.ssr=false

 #enable dsp gapless mode by default
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.offload.gapless.enabled=true

 #enable pbe effects
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.safx.pbe.enabled=false

 #parser input buffer size(256kb) in byte stream mode
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.parser.ip.buffer.size=262144

 #flac sw decoder 24 bit decode capability
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.flac.sw.decoder.24bit=true

 #timeout crash duration set to 20sec before system is ready.
 #timeout duration updates to default timeout of 5sec once the system is ready.
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.hal.boot.timeout.ms=20000

 #split a2dp DSP supported encoder list
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxtws-aptxhd-aac-ldac

 # A2DP offload support
 PRODUCT_VENDOR_PROPERTIES += \
 ro.bluetooth.a2dp_offload.supported=true

 # Disable A2DP offload
 PRODUCT_VENDOR_PROPERTIES += \
 persist.bluetooth.a2dp_offload.disabled=false

 # A2DP offload DSP supported encoder list
 PRODUCT_VENDOR_PROPERTIES += \
 persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac

 #enable software decoders for ALAC and APE
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.use.sw.alac.decoder=true
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.use.sw.ape.decoder=true

 #enable software decoder for MPEG-H
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.use.sw.mpegh.decoder=true

 #disable hw aac encoder by default in AR
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.hw.aac.encoder=false

 #audio becoming noisy intent broadcast delay
 PRODUCT_VENDOR_PROPERTIES += \
 audio.sys.noisy.broadcast.delay=600

 #offload pausetime out duration to 3 secs to inline with other outputs
 PRODUCT_VENDOR_PROPERTIES += \
 audio.sys.offload.pstimeout.secs=3

 #Set AudioFlinger client heap size
 PRODUCT_VENDOR_PROPERTIES += \
 ro.af.client_heap_size_kbyte=7168

 #Set HAL buffer size to samples equal to 3 ms
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio_hal.in_period_size=144

 #Set HAL buffer size to 3 ms
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio_hal.period_multiplier=3

 #ADM Buffering size in ms
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.adm.buffering.ms=2

 #enable headset calibration
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.volume.headset.gain.depcal=true

 #enable dualmic fluence for voice communication
 PRODUCT_VENDOR_PROPERTIES += \
 persist.audio.fluence.voicecomm=true

 #enable c2 based encoders/decoders as default NT decoders/encoders
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.c2.preferred=true

 #Enable dmaBuf heap usage by C2 components
 PRODUCT_VENDOR_PROPERTIES += \
 debug.c2.use_dmabufheaps=1

 #Enable C2 suspend
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.qc2audio.suspend.enabled=true

 #Enable qc2 audio sw flac frame decode
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.qc2audio.per_frame.flac.dec.enabled=true

 # compress capture feature related
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.compress_capture.enabled=true \
 vendor.audio.compress_capture.aac=true
 # compress capture end

 ifneq ($(GENERIC_ODM_IMAGE),true)
 $(warning "Enabling codec2.0 SW only for non-generic odm build variant")
 #Rank OMX SW codecs lower than OMX HW codecs
 PRODUCT_VENDOR_PROPERTIES += debug.stagefright.omx_default_rank=0
 endif
 endif

 USE_XML_AUDIO_POLICY_CONF := 1

 #enable keytone FR
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.hal.output.suspend.supported=true

 #Enable AAudio MMAP/NOIRQ data path
 #2 is AAUDIO_POLICY_AUTO so it will try MMAP then fallback to Legacy path
 PRODUCT_VENDOR_PROPERTIES += aaudio.mmap_policy=2
 #Allow EXCLUSIVE then fall back to SHARED.
 PRODUCT_VENDOR_PROPERTIES += aaudio.mmap_exclusive_policy=2
 PRODUCT_VENDOR_PROPERTIES += aaudio.hw_burst_min_usec=2000


 #enable mirror-link feature
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.enable.mirrorlink=false

 #enable voicecall speaker stereo
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.voicecall.speaker.stereo=true

 #enable AAC frame ctl for A2DP sinks
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.bt.aac_frm_ctl.enabled=true

 #enable VBR frame ctl
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.bt.aac_vbr_frm_ctl.enabled=true

 #enable dedicated proxy for hearing aid
 PRODUCT_VENDOR_PROPERTIES += \
 persist.vendor.audio.ha_proxy.enabled=true

 #add dynamic feature flags here
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.audio.feature.a2dp_offload.enable=true \
 vendor.audio.feature.afe_proxy.enable=true \
 vendor.audio.feature.anc_headset.enable=false \
 vendor.audio.feature.battery_listener.enable=true \
 vendor.audio.feature.compr_cap.enable=false \
 vendor.audio.feature.compress_in.enable=true \
 vendor.audio.feature.compress_meta_data.enable=true \
 vendor.audio.feature.compr_voip.enable=false \
 vendor.audio.feature.concurrent_capture.enable=true \
 vendor.audio.feature.custom_stereo.enable=true \
 vendor.audio.feature.display_port.enable=true \
 vendor.audio.feature.dsm_feedback.enable=false \
 vendor.audio.feature.dynamic_ecns.enable=true \
 vendor.audio.feature.ext_hw_plugin.enable=false \
 vendor.audio.feature.external_dsp.enable=false \
 vendor.audio.feature.external_speaker.enable=false \
 vendor.audio.feature.external_speaker_tfa.enable=false \
 vendor.audio.feature.fluence.enable=true \
 vendor.audio.feature.fm.enable=true \
 vendor.audio.feature.hdmi_edid.enable=true \
 vendor.audio.feature.hdmi_passthrough.enable=true \
 vendor.audio.feature.hfp.enable=true \
 vendor.audio.feature.hifi_audio.enable=false \
 vendor.audio.feature.hwdep_cal.enable=false \
 vendor.audio.feature.incall_music.enable=true \
 vendor.audio.feature.multi_voice_session.enable=true \
 vendor.audio.feature.keep_alive.enable=true \
 vendor.audio.feature.kpi_optimize.enable=true \
 vendor.audio.feature.maxx_audio.enable=false \
 vendor.audio.feature.ras.enable=true \
 vendor.audio.feature.record_play_concurency.enable=false \
 vendor.audio.feature.src_trkn.enable=true \
 vendor.audio.feature.spkr_prot.enable=true \
 vendor.audio.feature.ssrec.enable=true \
 vendor.audio.feature.usb_offload.enable=true \
 vendor.audio.feature.usb_offload_burst_mode.enable=true \
 vendor.audio.feature.usb_offload_sidetone_volume.enable=false \
 vendor.audio.feature.deepbuffer_as_primary.enable=false \
 vendor.audio.feature.vbat.enable=true \
 vendor.audio.feature.wsa.enable=false \
 vendor.audio.feature.audiozoom.enable=false \
 vendor.audio.feature.snd_mon.enable=true \
 vendor.audio.feature.dmabuf.cma.memory.enable=false \
 vendor.audio.hdr.record.enable=false

 # set dynamic sensor operation timeout in ms
 PRODUCT_VENDOR_PROPERTIES += \
 vendor.dynamic_sensor.setup.timeout.ms=2000

 PRODUCT_PACKAGES_ENG += \
     VoicePrintTest \
     VoicePrintDemo

 PRODUCT_PACKAGES_DEBUG += \
     AudioSettings

 ifeq ($(strip $(AUDIO_FEATURE_ENABLED_DEV_ARBI)),true)
 PRODUCT_PACKAGES_DEBUG += \
     libaudiodevarb
 endif

 ifeq ($(call is-vendor-board-platform,QCOM),true)
 ifeq ($(call is-platform-sdk-version-at-least,28),true)
 PRODUCT_PACKAGES_DEBUG += \
     libqti_resampler_headers \
     lib_soundmodel_headers \
     libqti_vraudio_headers
 endif
 ifeq ($(strip $(AUDIO_FEATURE_ENABLED_3D_AUDIO)),true)
 PRODUCT_PACKAGES_DEBUG += \
     libvr_object_engine \
     libvr_amb_engine \
     libhoaeffects_csim
 endif
 endif

 ifeq ($(strip $(BOARD_SUPPORTS_SOUND_TRIGGER)),true)
 PRODUCT_PACKAGES_DEBUG += \
     libadpcmdec
 endif

 AUDIO_FEATURE_ENABLED_GKI := true
 BUILD_AUDIO_TECHPACK_SOURCE := true
	AUDIO_HAL_DIR := hardware/qcom-caf/sm8550/audio/primary-hal

	# Audio product definitions
	include $(AUDIO_HAL_DIR)/configs/kalama/audio-modules.mk
	PRODUCT_PACKAGES += $(AUDIO_MODULES)

	#BOARD_USES_GENERIC_AUDIO := true
	#
	#AUDIO_FEATURE_FLAGS
	ifeq ($(TARGET_USES_QMAA_OVERRIDE_AUDIO), false)
	ifeq ($(TARGET_USES_QMAA),true)
	AUDIO_USE_STUB_HAL := true
	endif
	endif

	ifneq ($(AUDIO_USE_STUB_HAL), true)
	BOARD_USES_ALSA_AUDIO := true
	TARGET_USES_AOSP_FOR_AUDIO := false

	ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
	USE_CUSTOM_AUDIO_POLICY := 1
	AUDIO_FEATURE_QSSI_COMPLIANCE := true
	AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
	AUDIO_FEATURE_ENABLED_COMPRESS_INPUT := true
	AUDIO_FEATURE_ENABLED_CONCURRENT_CAPTURE := true
	AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := false
	AUDIO_FEATURE_ENABLED_DYNAMIC_ECNS := true
	AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
	AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
	AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
	AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
	AUDIO_FEATURE_ENABLED_HDMI_SPK := true
	AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
	AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_MPEGH_SW_DECODER := true
	AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
	AUDIO_FEATURE_ENABLED_SSR := true
	AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
	AUDIO_FEATURE_ENABLED_PAL_HIDL := true
	AUDIO_FEATURE_ENABLED_AGM_HIDL := true
	AUDIO_FEATURE_ENABLED_LSM_HIDL := true
	BOARD_USES_SRS_TRUEMEDIA := false
	DTS_CODEC_M_ := false
	MM_AUDIO_ENABLED_SAFX := false
	AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
	AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
	AUDIO_FEATURE_ENABLED_USB_TUNNEL := true
	AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_3D_AUDIO := true
	AUDIO_FEATURE_ENABLED_AHAL_EXT := false
	AUDIO_FEATURE_ENABLED_EXTENDED_COMPRESS_FORMAT := true
	DOLBY_ENABLE := false
	AUDIO_FEATURE_ENABLED_SPATIAL_AUDIO := true
	endif

	AUDIO_FEATURE_ENABLED_DLKM := true
	BOARD_SUPPORTS_SOUND_TRIGGER := true
	BOARD_SUPPORTS_GCS := false
	AUDIO_FEATURE_ENABLED_INSTANCE_ID := true
	AUDIO_USE_DEEP_AS_PRIMARY_OUTPUT := false
	AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
	AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
	AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
	AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
	AUDIO_FEATURE_ENABLED_FLUENCE := true
	AUDIO_FEATURE_ENABLED_HDMI_EDID := true
	AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH := true
	#AUDIO_FEATURE_ENABLED_KEEP_ALIVE := true
	AUDIO_FEATURE_ENABLED_DISPLAY_PORT := true
	AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := false
	AUDIO_FEATURE_ENABLED_HFP := true
	AUDIO_FEATURE_ENABLED_INCALL_MUSIC := true
	AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
	AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
	AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
	AUDIO_FEATURE_ENABLED_ACDB_LICENSE := false
	AUDIO_FEATURE_ENABLED_DEV_ARBI := false
	AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := true
	MM_AUDIO_ENABLED_FTM := true
	TARGET_USES_QCOM_MM_AUDIO := true
	AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
	AUDIO_FEATURE_ENABLED_GEF_SUPPORT := true
	BOARD_SUPPORTS_QAHW := false
	AUDIO_FEATURE_ENABLED_RAS := true
	AUDIO_FEATURE_ENABLED_SND_MONITOR := true
	AUDIO_FEATURE_ENABLED_USB_BURST_MODE := true
	AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
	AUDIO_FEATURE_ENABLED_BATTERY_LISTENER := true
	BUILD_AUDIO_TECHPACK_SOURCE := true
	AUDIO_FEATURE_ENABLED_MCS := true
	##AUDIO_FEATURE_FLAGS
	BOARD_SUPPORTS_OPENSOURCE_STHAL := true

	ifneq ($(strip $(TARGET_USES_RRO)), true)
	#Audio Specific device overlays
	DEVICE_PACKAGE_OVERLAYS += $(AUDIO_HAL_DIR)/configs/common/overlay
	endif
	PRODUCT_PACKAGES += fai__2.7.5_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
	PRODUCT_PACKAGES += fai__4.8.2_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
	PRODUCT_PACKAGES += fai__2.6.3_0.0__3.0.0_0.0__3.1.1.0_0.0__3.2.0_0.0__eai_2.7_enpu_v3.pmd
	PRODUCT_PACKAGES += fai__2.0.0_0.1__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.7_enpu3.pmd
	PRODUCT_PACKAGES += fai__2.6.5_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__4.8.3_0.0__3.0.0_0.0__3.1.0_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__3.0.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.6.5_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__4.8.4_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.0__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.6.3_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.7.5_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__2.7.8_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd
	PRODUCT_PACKAGES += fai__4.8.4_0.0__3.0.0_0.0__3.1.1_0.0__3.2.0_0.1__eai_2.10_enpuv3.pmd

	# Audio configuration xml's related to Kailua
	QCV_FAMILY_SKUS := kalama
	DEVICE_SKU := kalama

	CONFIG_PAL_SRC_DIR := vendor/qcom/opensource/pal/configs/kalama
	CONFIG_HAL_SRC_DIR := $(AUDIO_HAL_DIR)/configs/kalama
	CONFIG_SKU_OUT_DIR := $(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_$(DEVICE_SKU)

	PRODUCT_COPY_FILES += \
	$(CONFIG_HAL_SRC_DIR)/audio_effects.conf:$(CONFIG_SKU_OUT_DIR)/audio_effects.conf \
	$(CONFIG_HAL_SRC_DIR)/audio_effects.xml:$(CONFIG_SKU_OUT_DIR)/audio_effects.xml \
	$(CONFIG_HAL_SRC_DIR)/microphone_characteristics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/microphone_characteristics.xml \
	$(CONFIG_PAL_SRC_DIR)/card-defs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/card-defs.xml \
	$(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_qrd.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_qrd.xml \
	$(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_mtp.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_mtp.xml \
	$(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_cdp.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_cdp.xml \
	$(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_cdp_wsa883x.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_cdp_wsa883x.xml \
	$(CONFIG_PAL_SRC_DIR)/mixer_paths_kalama_grd.xml:$(CONFIG_SKU_OUT_DIR)/mixer_paths_kalama_grd.xml \
	$(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_qrd.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_qrd.xml \
	$(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_mtp.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_mtp.xml \
	$(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_cdp.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_cdp.xml \
	$(CONFIG_PAL_SRC_DIR)/usecaseKvManager.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usecaseKvManager.xml \
	$(CONFIG_PAL_SRC_DIR)/resourcemanager_kalama_grd.xml:$(CONFIG_SKU_OUT_DIR)/resourcemanager_kalama_grd.xml \
	$(AUDIO_HAL_DIR)/configs/common/media_codecs_vendor_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_vendor_audio.xml \
	frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml \
	frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml

	#XML Audio configuration files
	ifneq ($(TARGET_USES_AOSP_FOR_AUDIO), true)
	PRODUCT_COPY_FILES += \
	$(CONFIG_HAL_SRC_DIR)/audio_policy_configuration.xml:$(CONFIG_SKU_OUT_DIR)/audio_policy_configuration.xml

	#Audio configuration xml's common to Kalama family
	PRODUCT_COPY_FILES += \
	$(foreach DEVICE_SKU, $(QCV_FAMILY_SKUS), \
	$(CONFIG_HAL_SRC_DIR)/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_$(DEVICE_SKU)_qssi/audio_policy_configuration.xml)

	endif
	PRODUCT_COPY_FILES += \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
	$(TOPDIR)frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
	$(TOPDIR)frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
	$(TOPDIR)frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
	$(TOPDIR)frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
	$(TOPDIR)frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/bluetooth_qti_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_audio_policy_configuration.xml \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/bluetooth_qti_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_hearing_aid_audio_policy_configuration.xml

	PRODUCT_COPY_FILES += \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/media_codecs_c2_audio.xml:vendor/etc/media_codecs_c2_audio.xml \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.base-arm.policy:vendor/etc/seccomp_policy/c2audio.vendor.base-arm.policy \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.base-arm64.policy:vendor/etc/seccomp_policy/c2audio.vendor.base-arm64.policy \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.ext-arm.policy:vendor/etc/seccomp_policy/c2audio.vendor.ext-arm.policy \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/codec2/service/1.0/c2audio.vendor.ext-arm64.policy:vendor/etc/seccomp_policy/c2audio.vendor.ext-arm64.policy

	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	$(TOPDIR)$(AUDIO_HAL_DIR)/configs/common/init.qti.audio.debug.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qti.audio.debug.sh
	endif

	# Reduce client buffer size for fast audio output tracks
	PRODUCT_VENDOR_PROPERTIES += \
	af.fast_track_multiplier=1

	# Reduce AF standby time for playback threads (except offload)
	PRODUCT_VENDOR_PROPERTIES += \
	ro.audio.flinger_standbytime_ms=2000

	# Low latency audio buffer size in frames
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio_hal.period_size=192

	# period multiplier for low latency capture tracks
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.ull_record_period_multiplier=2

	##Ambisonic Capture
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.ambisonic.capture=false \
	persist.vendor.audio.ambisonic.auto.profile=false

	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.apptype.multirec.enabled=false

	##fluencetype can be "fluence" or "fluencepro" or "none"
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.audio.sdk.fluencetype=none\
	persist.vendor.audio.fluence.voicecall=true\
	persist.vendor.audio.fluence.voicerec=false\
	persist.vendor.audio.fluence.speaker=true\
	persist.vendor.audio.fluence.tmic.enabled=false

	#
	#snapdragon value add features
	#
	PRODUCT_VENDOR_PROPERTIES += \
	ro.qc.sdk.audio.ssr=false

	##fluencetype can be "fluence" or "fluencepro" or "none"
	PRODUCT_VENDOR_PROPERTIES += \
	ro.qc.sdk.audio.fluencetype=none\
	persist.audio.fluence.voicecall=true\
	persist.audio.fluence.voicerec=false\
	persist.audio.fluence.speaker=true

	##speaker protection v3 switch and ADSP AFE API version
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.spv3.enable=true\
	persist.vendor.audio.avs.afe_api_version=2

	#disable tunnel encoding
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.tunnel.encode=false

	#Disable RAS Feature by default
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.ras.enabled=false

	#Buffer size in kbytes for compress offload playback
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.buffer.size.kb=32

	#Enable offload audio video playback by default
	PRODUCT_VENDOR_PROPERTIES += \
	audio.offload.video=true

	#Enable audio track offload by default
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.track.enable=true

	#Enable music through deep buffer
	PRODUCT_VENDOR_PROPERTIES += \
	audio.deep_buffer.media=true

	#enable voice path for PCM VoIP by default
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.voice.path.for.pcm.voip=true

	#Enable multi channel aac through offload
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.multiaac.enable=true

	#Enable DS2, Hardbypass feature for Dolby
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.dolby.ds2.enabled=false\
	vendor.audio.dolby.ds2.hardbypass=false

	#Disable Multiple offload sesison
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.multiple.enabled=false

	#Disable Compress passthrough playback
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.passthrough=false

	#Disable surround sound recording
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.audio.sdk.ssr=false

	#enable dsp gapless mode by default
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.offload.gapless.enabled=true

	#enable pbe effects
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.safx.pbe.enabled=false

	#parser input buffer size(256kb) in byte stream mode
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.parser.ip.buffer.size=262144

	#flac sw decoder 24 bit decode capability
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.flac.sw.decoder.24bit=true

	#timeout crash duration set to 20sec before system is ready.
	#timeout duration updates to default timeout of 5sec once the system is ready.
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.hal.boot.timeout.ms=20000

	#split a2dp DSP supported encoder list
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxtws-aptxhd-aac-ldac

	# A2DP offload support
	PRODUCT_VENDOR_PROPERTIES += \
	ro.bluetooth.a2dp_offload.supported=true

	# Disable A2DP offload
	PRODUCT_VENDOR_PROPERTIES += \
	persist.bluetooth.a2dp_offload.disabled=false

	# A2DP offload DSP supported encoder list
	PRODUCT_VENDOR_PROPERTIES += \
	persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac

	#enable software decoders for ALAC and APE
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.use.sw.alac.decoder=true
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.use.sw.ape.decoder=true

	#enable software decoder for MPEG-H
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.use.sw.mpegh.decoder=true

	#disable hw aac encoder by default in AR
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.hw.aac.encoder=false

	#audio becoming noisy intent broadcast delay
	PRODUCT_VENDOR_PROPERTIES += \
	audio.sys.noisy.broadcast.delay=600

	#offload pausetime out duration to 3 secs to inline with other outputs
	PRODUCT_VENDOR_PROPERTIES += \
	audio.sys.offload.pstimeout.secs=3

	#Set AudioFlinger client heap size
	PRODUCT_VENDOR_PROPERTIES += \
	ro.af.client_heap_size_kbyte=7168

	#Set HAL buffer size to samples equal to 3 ms
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio_hal.in_period_size=144

	#Set HAL buffer size to 3 ms
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio_hal.period_multiplier=3

	#ADM Buffering size in ms
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.adm.buffering.ms=2

	#enable headset calibration
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.volume.headset.gain.depcal=true

	#enable dualmic fluence for voice communication
	PRODUCT_VENDOR_PROPERTIES += \
	persist.audio.fluence.voicecomm=true

	#enable c2 based encoders/decoders as default NT decoders/encoders
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.c2.preferred=true

	#Enable dmaBuf heap usage by C2 components
	PRODUCT_VENDOR_PROPERTIES += \
	debug.c2.use_dmabufheaps=1

	#Enable C2 suspend
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.qc2audio.suspend.enabled=true

	#Enable qc2 audio sw flac frame decode
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.qc2audio.per_frame.flac.dec.enabled=true

	# compress capture feature related
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.compress_capture.enabled=true \
	vendor.audio.compress_capture.aac=true
	# compress capture end

	ifneq ($(GENERIC_ODM_IMAGE),true)
	$(warning "Enabling codec2.0 SW only for non-generic odm build variant")
	#Rank OMX SW codecs lower than OMX HW codecs
	PRODUCT_VENDOR_PROPERTIES += debug.stagefright.omx_default_rank=0
	endif
	endif

	USE_XML_AUDIO_POLICY_CONF := 1

	#enable keytone FR
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.hal.output.suspend.supported=true

	#Enable AAudio MMAP/NOIRQ data path
	#2 is AAUDIO_POLICY_AUTO so it will try MMAP then fallback to Legacy path
	PRODUCT_VENDOR_PROPERTIES += aaudio.mmap_policy=2
	#Allow EXCLUSIVE then fall back to SHARED.
	PRODUCT_VENDOR_PROPERTIES += aaudio.mmap_exclusive_policy=2
	PRODUCT_VENDOR_PROPERTIES += aaudio.hw_burst_min_usec=2000


	#enable mirror-link feature
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.enable.mirrorlink=false

	#enable voicecall speaker stereo
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.voicecall.speaker.stereo=true

	#enable AAC frame ctl for A2DP sinks
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.bt.aac_frm_ctl.enabled=true

	#enable VBR frame ctl
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.bt.aac_vbr_frm_ctl.enabled=true

	#enable dedicated proxy for hearing aid
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.audio.ha_proxy.enabled=true

	#add dynamic feature flags here
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.feature.a2dp_offload.enable=true \
	vendor.audio.feature.afe_proxy.enable=true \
	vendor.audio.feature.anc_headset.enable=false \
	vendor.audio.feature.battery_listener.enable=true \
	vendor.audio.feature.compr_cap.enable=false \
	vendor.audio.feature.compress_in.enable=true \
	vendor.audio.feature.compress_meta_data.enable=true \
	vendor.audio.feature.compr_voip.enable=false \
	vendor.audio.feature.concurrent_capture.enable=true \
	vendor.audio.feature.custom_stereo.enable=true \
	vendor.audio.feature.display_port.enable=true \
	vendor.audio.feature.dsm_feedback.enable=false \
	vendor.audio.feature.dynamic_ecns.enable=true \
	vendor.audio.feature.ext_hw_plugin.enable=false \
	vendor.audio.feature.external_dsp.enable=false \
	vendor.audio.feature.external_speaker.enable=false \
	vendor.audio.feature.external_speaker_tfa.enable=false \
	vendor.audio.feature.fluence.enable=true \
	vendor.audio.feature.fm.enable=true \
	vendor.audio.feature.hdmi_edid.enable=true \
	vendor.audio.feature.hdmi_passthrough.enable=true \
	vendor.audio.feature.hfp.enable=true \
	vendor.audio.feature.hifi_audio.enable=false \
	vendor.audio.feature.hwdep_cal.enable=false \
	vendor.audio.feature.incall_music.enable=true \
	vendor.audio.feature.multi_voice_session.enable=true \
	vendor.audio.feature.keep_alive.enable=true \
	vendor.audio.feature.kpi_optimize.enable=true \
	vendor.audio.feature.maxx_audio.enable=false \
	vendor.audio.feature.ras.enable=true \
	vendor.audio.feature.record_play_concurency.enable=false \
	vendor.audio.feature.src_trkn.enable=true \
	vendor.audio.feature.spkr_prot.enable=true \
	vendor.audio.feature.ssrec.enable=true \
	vendor.audio.feature.usb_offload.enable=true \
	vendor.audio.feature.usb_offload_burst_mode.enable=true \
	vendor.audio.feature.usb_offload_sidetone_volume.enable=false \
	vendor.audio.feature.deepbuffer_as_primary.enable=false \
	vendor.audio.feature.vbat.enable=true \
	vendor.audio.feature.wsa.enable=false \
	vendor.audio.feature.audiozoom.enable=false \
	vendor.audio.feature.snd_mon.enable=true \
	vendor.audio.feature.dmabuf.cma.memory.enable=false \
	vendor.audio.hdr.record.enable=false

	# set dynamic sensor operation timeout in ms
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.dynamic_sensor.setup.timeout.ms=2000

	PRODUCT_PACKAGES_ENG += \
	VoicePrintTest \
	VoicePrintDemo

	PRODUCT_PACKAGES_DEBUG += \
	AudioSettings

	ifeq ($(strip $(AUDIO_FEATURE_ENABLED_DEV_ARBI)),true)
	PRODUCT_PACKAGES_DEBUG += \
	libaudiodevarb
	endif

	ifeq ($(call is-vendor-board-platform,QCOM),true)
	ifeq ($(call is-platform-sdk-version-at-least,28),true)
	PRODUCT_PACKAGES_DEBUG += \
	libqti_resampler_headers \
	lib_soundmodel_headers \
	libqti_vraudio_headers
	endif
	ifeq ($(strip $(AUDIO_FEATURE_ENABLED_3D_AUDIO)),true)
	PRODUCT_PACKAGES_DEBUG += \
	libvr_object_engine \
	libvr_amb_engine \
	libhoaeffects_csim
	endif
	endif

	ifeq ($(strip $(BOARD_SUPPORTS_SOUND_TRIGGER)),true)
	PRODUCT_PACKAGES_DEBUG += \
	libadpcmdec
	endif

	AUDIO_FEATURE_ENABLED_GKI := true
	BUILD_AUDIO_TECHPACK_SOURCE := true