| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "modules.usbaudio.audio_hal" |
| /* #define LOG_NDEBUG 0 */ |
| |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <math.h> |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/time.h> |
| #include <unistd.h> |
| |
| #include <log/log.h> |
| #include <cutils/list.h> |
| #include <cutils/str_parms.h> |
| #include <cutils/properties.h> |
| |
| #include <hardware/audio.h> |
| #include <hardware/audio_alsaops.h> |
| #include <hardware/hardware.h> |
| |
| #include <system/audio.h> |
| |
| #include <tinyalsa/asoundlib.h> |
| |
| #include <audio_utils/channels.h> |
| |
| #include "alsa_device_profile.h" |
| #include "alsa_device_proxy.h" |
| #include "alsa_logging.h" |
| |
| /* Lock play & record samples rates at or above this threshold */ |
| #define RATELOCK_THRESHOLD 96000 |
| |
| #define max(a, b) ((a) > (b) ? (a) : (b)) |
| #define min(a, b) ((a) < (b) ? (a) : (b)) |
| |
| struct audio_device { |
| struct audio_hw_device hw_device; |
| |
| pthread_mutex_t lock; /* see note below on mutex acquisition order */ |
| |
| /* output */ |
| struct listnode output_stream_list; |
| |
| /* input */ |
| struct listnode input_stream_list; |
| |
| /* lock input & output sample rates */ |
| /*FIXME - How do we address multiple output streams? */ |
| uint32_t device_sample_rate; // this should be a rate that is common to both input & output |
| |
| bool mic_muted; |
| |
| int32_t inputs_open; /* number of input streams currently open. */ |
| |
| audio_patch_handle_t next_patch_handle; // Increase 1 when create audio patch |
| }; |
| |
| struct stream_lock { |
| pthread_mutex_t lock; /* see note below on mutex acquisition order */ |
| pthread_mutex_t pre_lock; /* acquire before lock to avoid DOS by playback thread */ |
| }; |
| |
| struct alsa_device_info { |
| alsa_device_profile profile; /* The profile of the ALSA device */ |
| alsa_device_proxy proxy; /* The state */ |
| struct listnode list_node; |
| }; |
| |
| struct stream_out { |
| struct audio_stream_out stream; |
| |
| struct stream_lock lock; |
| |
| bool standby; |
| |
| struct audio_device *adev; /* hardware information - only using this for the lock */ |
| |
| struct listnode alsa_devices; /* The ALSA devices connected to the stream. */ |
| |
| unsigned hal_channel_count; /* channel count exposed to AudioFlinger. |
| * This may differ from the device channel count when |
| * the device is not compatible with AudioFlinger |
| * capabilities, e.g. exposes too many channels or |
| * too few channels. */ |
| audio_channel_mask_t hal_channel_mask; /* USB devices deal in channel counts, not masks |
| * so the proxy doesn't have a channel_mask, but |
| * audio HALs need to talk about channel masks |
| * so expose the one calculated by |
| * adev_open_output_stream */ |
| |
| struct listnode list_node; |
| |
| void * conversion_buffer; /* any conversions are put into here |
| * they could come from here too if |
| * there was a previous conversion */ |
| size_t conversion_buffer_size; /* in bytes */ |
| |
| struct pcm_config config; |
| |
| audio_io_handle_t handle; // Unique constant for a stream |
| |
| audio_patch_handle_t patch_handle; // Patch handle for this stream |
| |
| bool is_bit_perfect; // True if the stream is open with bit-perfect output flag |
| |
| // Mixer information used for volume handling |
| struct mixer* mixer; |
| struct mixer_ctl* volume_ctl; |
| int volume_ctl_num_values; |
| int max_volume_level; |
| int min_volume_level; |
| }; |
| |
| struct stream_in { |
| struct audio_stream_in stream; |
| |
| struct stream_lock lock; |
| |
| bool standby; |
| |
| struct audio_device *adev; /* hardware information - only using this for the lock */ |
| |
| struct listnode alsa_devices; /* The ALSA devices connected to the stream. */ |
| |
| unsigned hal_channel_count; /* channel count exposed to AudioFlinger. |
| * This may differ from the device channel count when |
| * the device is not compatible with AudioFlinger |
| * capabilities, e.g. exposes too many channels or |
| * too few channels. */ |
| audio_channel_mask_t hal_channel_mask; /* USB devices deal in channel counts, not masks |
| * so the proxy doesn't have a channel_mask, but |
| * audio HALs need to talk about channel masks |
| * so expose the one calculated by |
| * adev_open_input_stream */ |
| |
| struct listnode list_node; |
| |
| /* We may need to read more data from the device in order to data reduce to 16bit, 4chan */ |
| void * conversion_buffer; /* any conversions are put into here |
| * they could come from here too if |
| * there was a previous conversion */ |
| size_t conversion_buffer_size; /* in bytes */ |
| |
| struct pcm_config config; |
| |
| audio_io_handle_t handle; // Unique identifier for a stream |
| |
| audio_patch_handle_t patch_handle; // Patch handle for this stream |
| }; |
| |
| // Map channel count to output channel mask |
| static const audio_channel_mask_t OUT_CHANNEL_MASKS_MAP[FCC_24 + 1] = { |
| [0] = AUDIO_CHANNEL_NONE, // == 0 (so this line is optional and could be omitted) |
| // != AUDIO_CHANNEL_INVALID == 0xC0000000u |
| |
| [1] = AUDIO_CHANNEL_OUT_MONO, |
| [2] = AUDIO_CHANNEL_OUT_STEREO, |
| [3] = AUDIO_CHANNEL_OUT_2POINT1, |
| [4] = AUDIO_CHANNEL_OUT_QUAD, |
| [5] = AUDIO_CHANNEL_OUT_PENTA, |
| [6] = AUDIO_CHANNEL_OUT_5POINT1, |
| [7] = AUDIO_CHANNEL_OUT_6POINT1, |
| [8] = AUDIO_CHANNEL_OUT_7POINT1, |
| |
| [9 ... 11] = AUDIO_CHANNEL_NONE, // == 0 (so this line is optional and could be omitted). |
| |
| [12] = AUDIO_CHANNEL_OUT_7POINT1POINT4, |
| |
| [13 ... 23] = AUDIO_CHANNEL_NONE, // == 0 (so this line is optional and could be omitted). |
| |
| [24] = AUDIO_CHANNEL_OUT_22POINT2, |
| }; |
| static const int OUT_CHANNEL_MASKS_SIZE = AUDIO_ARRAY_SIZE(OUT_CHANNEL_MASKS_MAP); |
| |
| // Map channel count to input channel mask |
| static const audio_channel_mask_t IN_CHANNEL_MASKS_MAP[] = { |
| AUDIO_CHANNEL_NONE, /* 0 */ |
| AUDIO_CHANNEL_IN_MONO, /* 1 */ |
| AUDIO_CHANNEL_IN_STEREO, /* 2 */ |
| /* channel counts greater than this are not considered */ |
| }; |
| static const int IN_CHANNEL_MASKS_SIZE = AUDIO_ARRAY_SIZE(IN_CHANNEL_MASKS_MAP); |
| |
| // Map channel count to index mask |
| static const audio_channel_mask_t CHANNEL_INDEX_MASKS_MAP[FCC_24 + 1] = { |
| [0] = AUDIO_CHANNEL_NONE, // == 0 (so this line is optional and could be omitted). |
| |
| [1] = AUDIO_CHANNEL_INDEX_MASK_1, |
| [2] = AUDIO_CHANNEL_INDEX_MASK_2, |
| [3] = AUDIO_CHANNEL_INDEX_MASK_3, |
| [4] = AUDIO_CHANNEL_INDEX_MASK_4, |
| [5] = AUDIO_CHANNEL_INDEX_MASK_5, |
| [6] = AUDIO_CHANNEL_INDEX_MASK_6, |
| [7] = AUDIO_CHANNEL_INDEX_MASK_7, |
| [8] = AUDIO_CHANNEL_INDEX_MASK_8, |
| |
| [9] = AUDIO_CHANNEL_INDEX_MASK_9, |
| [10] = AUDIO_CHANNEL_INDEX_MASK_10, |
| [11] = AUDIO_CHANNEL_INDEX_MASK_11, |
| [12] = AUDIO_CHANNEL_INDEX_MASK_12, |
| [13] = AUDIO_CHANNEL_INDEX_MASK_13, |
| [14] = AUDIO_CHANNEL_INDEX_MASK_14, |
| [15] = AUDIO_CHANNEL_INDEX_MASK_15, |
| [16] = AUDIO_CHANNEL_INDEX_MASK_16, |
| |
| [17] = AUDIO_CHANNEL_INDEX_MASK_17, |
| [18] = AUDIO_CHANNEL_INDEX_MASK_18, |
| [19] = AUDIO_CHANNEL_INDEX_MASK_19, |
| [20] = AUDIO_CHANNEL_INDEX_MASK_20, |
| [21] = AUDIO_CHANNEL_INDEX_MASK_21, |
| [22] = AUDIO_CHANNEL_INDEX_MASK_22, |
| [23] = AUDIO_CHANNEL_INDEX_MASK_23, |
| [24] = AUDIO_CHANNEL_INDEX_MASK_24, |
| }; |
| static const int CHANNEL_INDEX_MASKS_SIZE = AUDIO_ARRAY_SIZE(CHANNEL_INDEX_MASKS_MAP); |
| |
| static const char* ALL_VOLUME_CONTROL_NAMES[] = { |
| "PCM Playback Volume", |
| "Headset Playback Volume", |
| "Headphone Playback Volume", |
| "Master Playback Volume", |
| }; |
| static const int VOLUME_CONTROL_NAMES_NUM = AUDIO_ARRAY_SIZE(ALL_VOLUME_CONTROL_NAMES); |
| |
| /* |
| * Locking Helpers |
| */ |
| /* |
| * NOTE: when multiple mutexes have to be acquired, always take the |
| * stream_in or stream_out mutex first, followed by the audio_device mutex. |
| * stream pre_lock is always acquired before stream lock to prevent starvation of control thread by |
| * higher priority playback or capture thread. |
| */ |
| |
| static void stream_lock_init(struct stream_lock *lock) { |
| pthread_mutex_init(&lock->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_mutex_init(&lock->pre_lock, (const pthread_mutexattr_t *) NULL); |
| } |
| |
| static void stream_lock(struct stream_lock *lock) { |
| if (lock == NULL) { |
| return; |
| } |
| pthread_mutex_lock(&lock->pre_lock); |
| pthread_mutex_lock(&lock->lock); |
| pthread_mutex_unlock(&lock->pre_lock); |
| } |
| |
| static void stream_unlock(struct stream_lock *lock) { |
| pthread_mutex_unlock(&lock->lock); |
| } |
| |
| static void device_lock(struct audio_device *adev) { |
| pthread_mutex_lock(&adev->lock); |
| } |
| |
| static int device_try_lock(struct audio_device *adev) { |
| return pthread_mutex_trylock(&adev->lock); |
| } |
| |
| static void device_unlock(struct audio_device *adev) { |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| /* |
| * streams list management |
| */ |
| static void adev_add_stream_to_list( |
| struct audio_device* adev, struct listnode* list, struct listnode* stream_node) { |
| device_lock(adev); |
| |
| list_add_tail(list, stream_node); |
| |
| device_unlock(adev); |
| } |
| |
| static struct stream_out* adev_get_stream_out_by_io_handle_l( |
| struct audio_device* adev, audio_io_handle_t handle) { |
| struct listnode *node; |
| list_for_each (node, &adev->output_stream_list) { |
| struct stream_out *out = node_to_item(node, struct stream_out, list_node); |
| if (out->handle == handle) { |
| return out; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct stream_in* adev_get_stream_in_by_io_handle_l( |
| struct audio_device* adev, audio_io_handle_t handle) { |
| struct listnode *node; |
| list_for_each (node, &adev->input_stream_list) { |
| struct stream_in *in = node_to_item(node, struct stream_in, list_node); |
| if (in->handle == handle) { |
| return in; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct stream_out* adev_get_stream_out_by_patch_handle_l( |
| struct audio_device* adev, audio_patch_handle_t patch_handle) { |
| struct listnode *node; |
| list_for_each (node, &adev->output_stream_list) { |
| struct stream_out *out = node_to_item(node, struct stream_out, list_node); |
| if (out->patch_handle == patch_handle) { |
| return out; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct stream_in* adev_get_stream_in_by_patch_handle_l( |
| struct audio_device* adev, audio_patch_handle_t patch_handle) { |
| struct listnode *node; |
| list_for_each (node, &adev->input_stream_list) { |
| struct stream_in *in = node_to_item(node, struct stream_in, list_node); |
| if (in->patch_handle == patch_handle) { |
| return in; |
| } |
| } |
| return NULL; |
| } |
| |
| /* |
| * Extract the card and device numbers from the supplied key/value pairs. |
| * kvpairs A null-terminated string containing the key/value pairs or card and device. |
| * i.e. "card=1;device=42" |
| * card A pointer to a variable to receive the parsed-out card number. |
| * device A pointer to a variable to receive the parsed-out device number. |
| * NOTE: The variables pointed to by card and device return -1 (undefined) if the |
| * associated key/value pair is not found in the provided string. |
| * Return true if the kvpairs string contain a card/device spec, false otherwise. |
| */ |
| static bool parse_card_device_params(const char *kvpairs, int *card, int *device) |
| { |
| struct str_parms * parms = str_parms_create_str(kvpairs); |
| char value[32]; |
| int param_val; |
| |
| // initialize to "undefined" state. |
| *card = -1; |
| *device = -1; |
| |
| param_val = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (param_val >= 0) { |
| *card = atoi(value); |
| } |
| |
| param_val = str_parms_get_str(parms, "device", value, sizeof(value)); |
| if (param_val >= 0) { |
| *device = atoi(value); |
| } |
| |
| str_parms_destroy(parms); |
| |
| return *card >= 0 && *device >= 0; |
| } |
| |
| static char *device_get_parameters(const alsa_device_profile *profile, const char * keys) |
| { |
| if (profile->card < 0 || profile->device < 0) { |
| return strdup(""); |
| } |
| |
| struct str_parms *query = str_parms_create_str(keys); |
| struct str_parms *result = str_parms_create(); |
| |
| /* These keys are from hardware/libhardware/include/audio.h */ |
| /* supported sample rates */ |
| if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES)) { |
| char* rates_list = profile_get_sample_rate_strs(profile); |
| str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES, |
| rates_list); |
| free(rates_list); |
| } |
| |
| /* supported channel counts */ |
| if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS)) { |
| char* channels_list = profile_get_channel_count_strs(profile); |
| str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, |
| channels_list); |
| free(channels_list); |
| } |
| |
| /* supported sample formats */ |
| if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_FORMATS)) { |
| char * format_params = profile_get_format_strs(profile); |
| str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_FORMATS, |
| format_params); |
| free(format_params); |
| } |
| str_parms_destroy(query); |
| |
| char* result_str = str_parms_to_str(result); |
| str_parms_destroy(result); |
| |
| ALOGV("device_get_parameters = %s", result_str); |
| |
| return result_str; |
| } |
| |
| static audio_format_t audio_format_from(enum pcm_format format) |
| { |
| switch (format) { |
| case PCM_FORMAT_S16_LE: |
| return AUDIO_FORMAT_PCM_16_BIT; |
| case PCM_FORMAT_S32_LE: |
| return AUDIO_FORMAT_PCM_32_BIT; |
| case PCM_FORMAT_S8: |
| return AUDIO_FORMAT_PCM_8_BIT; |
| case PCM_FORMAT_S24_LE: |
| return AUDIO_FORMAT_PCM_8_24_BIT; |
| case PCM_FORMAT_S24_3LE: |
| return AUDIO_FORMAT_PCM_24_BIT_PACKED; |
| default: |
| return AUDIO_FORMAT_INVALID; |
| } |
| } |
| |
| static unsigned int populate_channel_mask_from_profile(const alsa_device_profile* profile, |
| bool is_output, |
| audio_channel_mask_t channel_masks[]) |
| { |
| unsigned int num_channel_masks = 0; |
| const audio_channel_mask_t* channel_masks_map = |
| is_output ? OUT_CHANNEL_MASKS_MAP : IN_CHANNEL_MASKS_MAP; |
| int channel_masks_size = is_output ? OUT_CHANNEL_MASKS_SIZE : IN_CHANNEL_MASKS_SIZE; |
| if (channel_masks_size > FCC_LIMIT + 1) { |
| channel_masks_size = FCC_LIMIT + 1; |
| } |
| unsigned int channel_count = 0; |
| for (size_t i = 0; i < min(channel_masks_size, AUDIO_PORT_MAX_CHANNEL_MASKS) && |
| (channel_count = profile->channel_counts[i]) != 0 && |
| num_channel_masks < AUDIO_PORT_MAX_CHANNEL_MASKS; ++i) { |
| if (channel_count < channel_masks_size && |
| channel_masks_map[channel_count] != AUDIO_CHANNEL_NONE) { |
| channel_masks[num_channel_masks++] = channel_masks_map[channel_count]; |
| if (num_channel_masks >= AUDIO_PORT_MAX_CHANNEL_MASKS) { |
| break; |
| } |
| } |
| if (channel_count < CHANNEL_INDEX_MASKS_SIZE && |
| CHANNEL_INDEX_MASKS_MAP[channel_count] != AUDIO_CHANNEL_NONE) { |
| channel_masks[num_channel_masks++] = CHANNEL_INDEX_MASKS_MAP[channel_count]; |
| } |
| } |
| return num_channel_masks; |
| } |
| |
| static unsigned int populate_sample_rates_from_profile(const alsa_device_profile* profile, |
| unsigned int sample_rates[]) |
| { |
| unsigned int num_sample_rates = 0; |
| for (;num_sample_rates < min(MAX_PROFILE_SAMPLE_RATES, AUDIO_PORT_MAX_SAMPLING_RATES) && |
| profile->sample_rates[num_sample_rates] != 0; num_sample_rates++) { |
| sample_rates[num_sample_rates] = profile->sample_rates[num_sample_rates]; |
| } |
| return num_sample_rates; |
| } |
| |
| static bool are_all_devices_found(unsigned int num_devices_to_find, |
| const int cards_to_find[], |
| const int devices_to_find[], |
| unsigned int num_devices, |
| const int cards[], |
| const int devices[]) { |
| for (unsigned int i = 0; i < num_devices_to_find; ++i) { |
| unsigned int j = 0; |
| for (; j < num_devices; ++j) { |
| if (cards_to_find[i] == cards[j] && devices_to_find[i] == devices[j]) { |
| break; |
| } |
| } |
| if (j >= num_devices) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static bool are_devices_the_same(unsigned int left_num_devices, |
| const int left_cards[], |
| const int left_devices[], |
| unsigned int right_num_devices, |
| const int right_cards[], |
| const int right_devices[]) { |
| if (left_num_devices != right_num_devices) { |
| return false; |
| } |
| return are_all_devices_found(left_num_devices, left_cards, left_devices, |
| right_num_devices, right_cards, right_devices) && |
| are_all_devices_found(right_num_devices, right_cards, right_devices, |
| left_num_devices, left_cards, left_devices); |
| } |
| |
| static void out_stream_find_mixer_volume_control(struct stream_out* out, int card) { |
| out->mixer = mixer_open(card); |
| if (out->mixer == NULL) { |
| ALOGI("%s, no mixer found for card=%d", __func__, card); |
| return; |
| } |
| unsigned int num_ctls = mixer_get_num_ctls(out->mixer); |
| for (int i = 0; i < VOLUME_CONTROL_NAMES_NUM; ++i) { |
| for (unsigned int j = 0; j < num_ctls; ++j) { |
| struct mixer_ctl *ctl = mixer_get_ctl(out->mixer, j); |
| enum mixer_ctl_type ctl_type = mixer_ctl_get_type(ctl); |
| if (strcasestr(mixer_ctl_get_name(ctl), ALL_VOLUME_CONTROL_NAMES[i]) == NULL || |
| ctl_type != MIXER_CTL_TYPE_INT) { |
| continue; |
| } |
| ALOGD("%s, mixer volume control(%s) found", __func__, ALL_VOLUME_CONTROL_NAMES[i]); |
| out->volume_ctl_num_values = mixer_ctl_get_num_values(ctl); |
| if (out->volume_ctl_num_values <= 0) { |
| ALOGE("%s the num(%d) of volume ctl values is wrong", |
| __func__, out->volume_ctl_num_values); |
| out->volume_ctl_num_values = 0; |
| continue; |
| } |
| out->max_volume_level = mixer_ctl_get_range_max(ctl); |
| out->min_volume_level = mixer_ctl_get_range_min(ctl); |
| if (out->max_volume_level < out->min_volume_level) { |
| ALOGE("%s the max volume level(%d) is less than min volume level(%d)", |
| __func__, out->max_volume_level, out->min_volume_level); |
| out->max_volume_level = 0; |
| out->min_volume_level = 0; |
| continue; |
| } |
| out->volume_ctl = ctl; |
| return; |
| } |
| } |
| ALOGI("%s, no volume control found", __func__); |
| } |
| |
| /* |
| * HAl Functions |
| */ |
| /** |
| * NOTE: when multiple mutexes have to be acquired, always respect the |
| * following order: hw device > out stream |
| */ |
| |
| static struct alsa_device_info* stream_get_first_alsa_device(const struct listnode *alsa_devices) { |
| if (list_empty(alsa_devices)) { |
| return NULL; |
| } |
| return node_to_item(list_head(alsa_devices), struct alsa_device_info, list_node); |
| } |
| |
| /** |
| * Must be called with holding the stream's lock. |
| */ |
| static void stream_standby_l(struct listnode *alsa_devices, bool *standby) |
| { |
| if (!*standby) { |
| struct listnode *node; |
| list_for_each (node, alsa_devices) { |
| struct alsa_device_info *device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| proxy_close(&device_info->proxy); |
| } |
| *standby = true; |
| } |
| } |
| |
| static void stream_clear_devices(struct listnode *alsa_devices) |
| { |
| struct listnode *node, *temp; |
| struct alsa_device_info *device_info = NULL; |
| list_for_each_safe (node, temp, alsa_devices) { |
| device_info = node_to_item(node, struct alsa_device_info, list_node); |
| if (device_info != NULL) { |
| list_remove(&device_info->list_node); |
| free(device_info); |
| } |
| } |
| } |
| |
| static int stream_set_new_devices(struct pcm_config *config, |
| struct listnode *alsa_devices, |
| unsigned int num_devices, |
| const int cards[], |
| const int devices[], |
| int direction, |
| bool is_bit_perfect) |
| { |
| int status = 0; |
| stream_clear_devices(alsa_devices); |
| |
| for (unsigned int i = 0; i < num_devices; ++i) { |
| struct alsa_device_info *device_info = |
| (struct alsa_device_info *) calloc(1, sizeof(struct alsa_device_info)); |
| profile_init(&device_info->profile, direction); |
| device_info->profile.card = cards[i]; |
| device_info->profile.device = devices[i]; |
| status = profile_read_device_info(&device_info->profile) ? 0 : -EINVAL; |
| if (status != 0) { |
| ALOGE("%s failed to read device info card=%d;device=%d", |
| __func__, cards[i], devices[i]); |
| goto exit; |
| } |
| status = proxy_prepare(&device_info->proxy, &device_info->profile, config, is_bit_perfect); |
| if (status != 0) { |
| ALOGE("%s failed to prepare device card=%d;device=%d", |
| __func__, cards[i], devices[i]); |
| goto exit; |
| } |
| list_add_tail(alsa_devices, &device_info->list_node); |
| } |
| |
| exit: |
| if (status != 0) { |
| stream_clear_devices(alsa_devices); |
| } |
| return status; |
| } |
| |
| static void stream_dump_alsa_devices(const struct listnode *alsa_devices, int fd) { |
| struct listnode *node; |
| size_t i = 0; |
| list_for_each(node, alsa_devices) { |
| struct alsa_device_info *device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| const char* direction = device_info->profile.direction == PCM_OUT ? "Output" : "Input"; |
| dprintf(fd, "%s Profile %zu:\n", direction, i); |
| profile_dump(&device_info->profile, fd); |
| |
| dprintf(fd, "%s Proxy %zu:\n", direction, i); |
| proxy_dump(&device_info->proxy, fd); |
| } |
| } |
| |
| /* |
| * OUT functions |
| */ |
| static uint32_t out_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct alsa_device_info *device_info = stream_get_first_alsa_device( |
| &((struct stream_out*)stream)->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return 0; |
| } |
| uint32_t rate = proxy_get_sample_rate(&device_info->proxy); |
| ALOGV("out_get_sample_rate() = %d", rate); |
| return rate; |
| } |
| |
| static int out_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| return 0; |
| } |
| |
| static size_t out_get_buffer_size(const struct audio_stream *stream) |
| { |
| const struct stream_out* out = (const struct stream_out*)stream; |
| const struct alsa_device_info* device_info = stream_get_first_alsa_device(&out->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return 0; |
| } |
| return proxy_get_period_size(&device_info->proxy) * audio_stream_out_frame_size(&(out->stream)); |
| } |
| |
| static uint32_t out_get_channels(const struct audio_stream *stream) |
| { |
| const struct stream_out *out = (const struct stream_out*)stream; |
| return out->hal_channel_mask; |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream *stream) |
| { |
| /* Note: The HAL doesn't do any FORMAT conversion at this time. It |
| * Relies on the framework to provide data in the specified format. |
| * This could change in the future. |
| */ |
| struct alsa_device_info *device_info = stream_get_first_alsa_device( |
| &((struct stream_out*)stream)->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return AUDIO_FORMAT_DEFAULT; |
| } |
| audio_format_t format = audio_format_from_pcm_format(proxy_get_format(&device_info->proxy)); |
| return format; |
| } |
| |
| static int out_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| return 0; |
| } |
| |
| static int out_standby(struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| stream_lock(&out->lock); |
| device_lock(out->adev); |
| stream_standby_l(&out->alsa_devices, &out->standby); |
| device_unlock(out->adev); |
| stream_unlock(&out->lock); |
| return 0; |
| } |
| |
| static int out_dump(const struct audio_stream *stream, int fd) { |
| const struct stream_out* out_stream = (const struct stream_out*) stream; |
| |
| if (out_stream != NULL) { |
| stream_dump_alsa_devices(&out_stream->alsa_devices, fd); |
| } |
| |
| return 0; |
| } |
| |
| static int out_set_parameters(struct audio_stream *stream __unused, const char *kvpairs) |
| { |
| ALOGV("out_set_parameters() keys:%s", kvpairs); |
| |
| // The set parameters here only matters when the routing devices are changed. |
| // When the device version is not less than 3.0, the framework will use create |
| // audio patch API instead of set parameters to chanage audio routing. |
| return 0; |
| } |
| |
| static char * out_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| stream_lock(&out->lock); |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&out->alsa_devices); |
| char *params_str = NULL; |
| if (device_info != NULL) { |
| params_str = device_get_parameters(&device_info->profile, keys); |
| } |
| stream_unlock(&out->lock); |
| return params_str; |
| } |
| |
| static uint32_t out_get_latency(const struct audio_stream_out *stream) |
| { |
| struct alsa_device_info *device_info = stream_get_first_alsa_device( |
| &((struct stream_out*)stream)->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return 0; |
| } |
| return proxy_get_latency(&device_info->proxy); |
| } |
| |
| static int out_set_volume(struct audio_stream_out *stream, float left, float right) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int result = -ENOSYS; |
| stream_lock(&out->lock); |
| if (out->volume_ctl != NULL) { |
| int left_volume = |
| out->min_volume_level + ceil((out->max_volume_level - out->min_volume_level) * left); |
| int right_volume = |
| out->min_volume_level + ceil((out->max_volume_level - out->min_volume_level) * right); |
| int volumes[out->volume_ctl_num_values]; |
| if (out->volume_ctl_num_values == 1) { |
| volumes[0] = left_volume; |
| } else { |
| volumes[0] = left_volume; |
| volumes[1] = right_volume; |
| for (int i = 2; i < out->volume_ctl_num_values; ++i) { |
| volumes[i] = left_volume; |
| } |
| } |
| result = mixer_ctl_set_array(out->volume_ctl, volumes, out->volume_ctl_num_values); |
| if (result != 0) { |
| ALOGE("%s error=%d left=%f right=%f", __func__, result, left, right); |
| } |
| } |
| stream_unlock(&out->lock); |
| return result; |
| } |
| |
| /* must be called with hw device and output stream mutexes locked */ |
| static int start_output_stream(struct stream_out *out) |
| { |
| int status = 0; |
| struct listnode *node; |
| list_for_each(node, &out->alsa_devices) { |
| struct alsa_device_info *device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| ALOGV("start_output_stream(card:%d device:%d)", |
| device_info->profile.card, device_info->profile.device); |
| status = proxy_open(&device_info->proxy); |
| if (status != 0) { |
| ALOGE("%s failed to open device(card: %d device: %d)", |
| __func__, device_info->profile.card, device_info->profile.device); |
| goto exit; |
| } |
| } |
| |
| exit: |
| if (status != 0) { |
| list_for_each(node, &out->alsa_devices) { |
| struct alsa_device_info *device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| proxy_close(&device_info->proxy); |
| } |
| |
| } |
| return status; |
| } |
| |
| static ssize_t out_write(struct audio_stream_out *stream, const void* buffer, size_t bytes) |
| { |
| int ret; |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| stream_lock(&out->lock); |
| if (out->standby) { |
| ret = start_output_stream(out); |
| if (ret != 0) { |
| goto err; |
| } |
| out->standby = false; |
| } |
| |
| struct listnode* node; |
| list_for_each(node, &out->alsa_devices) { |
| struct alsa_device_info* device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| alsa_device_proxy* proxy = &device_info->proxy; |
| const void * write_buff = buffer; |
| int num_write_buff_bytes = bytes; |
| const int num_device_channels = proxy_get_channel_count(proxy); /* what we told alsa */ |
| const int num_req_channels = out->hal_channel_count; /* what we told AudioFlinger */ |
| if (num_device_channels != num_req_channels) { |
| /* allocate buffer */ |
| const size_t required_conversion_buffer_size = |
| bytes * num_device_channels / num_req_channels; |
| if (required_conversion_buffer_size > out->conversion_buffer_size) { |
| out->conversion_buffer_size = required_conversion_buffer_size; |
| out->conversion_buffer = realloc(out->conversion_buffer, |
| out->conversion_buffer_size); |
| } |
| /* convert data */ |
| const audio_format_t audio_format = out_get_format(&(out->stream.common)); |
| const unsigned sample_size_in_bytes = audio_bytes_per_sample(audio_format); |
| num_write_buff_bytes = |
| adjust_channels(write_buff, num_req_channels, |
| out->conversion_buffer, num_device_channels, |
| sample_size_in_bytes, num_write_buff_bytes); |
| write_buff = out->conversion_buffer; |
| } |
| |
| if (write_buff != NULL && num_write_buff_bytes != 0) { |
| proxy_write(proxy, write_buff, num_write_buff_bytes); |
| } |
| } |
| |
| stream_unlock(&out->lock); |
| |
| return bytes; |
| |
| err: |
| stream_unlock(&out->lock); |
| if (ret != 0) { |
| usleep(bytes * 1000000 / audio_stream_out_frame_size(stream) / |
| out_get_sample_rate(&stream->common)); |
| } |
| |
| return bytes; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out *stream, uint32_t *dsp_frames) |
| { |
| return -EINVAL; |
| } |
| |
| static int out_get_presentation_position(const struct audio_stream_out *stream, |
| uint64_t *frames, struct timespec *timestamp) |
| { |
| struct stream_out *out = (struct stream_out *)stream; // discard const qualifier |
| stream_lock(&out->lock); |
| |
| const struct alsa_device_info* device_info = stream_get_first_alsa_device(&out->alsa_devices); |
| const int ret = device_info == NULL ? -ENODEV : |
| proxy_get_presentation_position(&device_info->proxy, frames, timestamp); |
| stream_unlock(&out->lock); |
| return ret; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int out_get_next_write_timestamp(const struct audio_stream_out *stream, int64_t *timestamp) |
| { |
| return -EINVAL; |
| } |
| |
| static int adev_open_output_stream(struct audio_hw_device *hw_dev, |
| audio_io_handle_t handle, |
| audio_devices_t devicesSpec __unused, |
| audio_output_flags_t flags, |
| struct audio_config *config, |
| struct audio_stream_out **stream_out, |
| const char *address /*__unused*/) |
| { |
| ALOGV("adev_open_output_stream() handle:0x%X, devicesSpec:0x%X, flags:0x%X, addr:%s", |
| handle, devicesSpec, flags, address); |
| |
| const bool is_bit_perfect = ((flags & AUDIO_OUTPUT_FLAG_BIT_PERFECT) != AUDIO_OUTPUT_FLAG_NONE); |
| if (is_bit_perfect && (config->format == AUDIO_FORMAT_DEFAULT || |
| config->sample_rate == 0 || |
| config->channel_mask == AUDIO_CHANNEL_NONE)) { |
| ALOGE("%s request bit perfect playback, config(format=%#x, sample_rate=%u, " |
| "channel_mask=%#x) must be specified", __func__, config->format, |
| config->sample_rate, config->channel_mask); |
| return -EINVAL; |
| } |
| |
| struct stream_out *out; |
| |
| out = (struct stream_out *)calloc(1, sizeof(struct stream_out)); |
| if (out == NULL) { |
| return -ENOMEM; |
| } |
| |
| /* setup function pointers */ |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.common.set_sample_rate = out_set_sample_rate; |
| out->stream.common.get_buffer_size = out_get_buffer_size; |
| out->stream.common.get_channels = out_get_channels; |
| out->stream.common.get_format = out_get_format; |
| out->stream.common.set_format = out_set_format; |
| out->stream.common.standby = out_standby; |
| out->stream.common.dump = out_dump; |
| out->stream.common.set_parameters = out_set_parameters; |
| out->stream.common.get_parameters = out_get_parameters; |
| out->stream.common.add_audio_effect = out_add_audio_effect; |
| out->stream.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream.get_latency = out_get_latency; |
| out->stream.set_volume = out_set_volume; |
| out->stream.write = out_write; |
| out->stream.get_render_position = out_get_render_position; |
| out->stream.get_presentation_position = out_get_presentation_position; |
| out->stream.get_next_write_timestamp = out_get_next_write_timestamp; |
| |
| out->handle = handle; |
| |
| stream_lock_init(&out->lock); |
| |
| out->adev = (struct audio_device *)hw_dev; |
| |
| list_init(&out->alsa_devices); |
| struct alsa_device_info *device_info = |
| (struct alsa_device_info *)calloc(1, sizeof(struct alsa_device_info)); |
| profile_init(&device_info->profile, PCM_OUT); |
| |
| // build this to hand to the alsa_device_proxy |
| struct pcm_config proxy_config = {}; |
| |
| /* Pull out the card/device pair */ |
| parse_card_device_params(address, &device_info->profile.card, &device_info->profile.device); |
| |
| profile_read_device_info(&device_info->profile); |
| |
| int ret = 0; |
| |
| /* Rate */ |
| if (config->sample_rate == 0) { |
| proxy_config.rate = profile_get_default_sample_rate(&device_info->profile); |
| } else if (profile_is_sample_rate_valid(&device_info->profile, config->sample_rate)) { |
| proxy_config.rate = config->sample_rate; |
| } else { |
| ret = -EINVAL; |
| if (is_bit_perfect) { |
| ALOGE("%s requesting bit-perfect but the sample rate(%u) is not valid", |
| __func__, config->sample_rate); |
| return ret; |
| } |
| proxy_config.rate = config->sample_rate = |
| profile_get_default_sample_rate(&device_info->profile); |
| } |
| |
| /* TODO: This is a problem if the input does not support this rate */ |
| device_lock(out->adev); |
| out->adev->device_sample_rate = config->sample_rate; |
| device_unlock(out->adev); |
| |
| /* Format */ |
| if (config->format == AUDIO_FORMAT_DEFAULT) { |
| proxy_config.format = profile_get_default_format(&device_info->profile); |
| config->format = audio_format_from_pcm_format(proxy_config.format); |
| } else { |
| enum pcm_format fmt = pcm_format_from_audio_format(config->format); |
| if (profile_is_format_valid(&device_info->profile, fmt)) { |
| proxy_config.format = fmt; |
| } else { |
| ret = -EINVAL; |
| if (is_bit_perfect) { |
| ALOGE("%s request bit-perfect but the format(%#x) is not valid", |
| __func__, config->format); |
| return ret; |
| } |
| proxy_config.format = profile_get_default_format(&device_info->profile); |
| config->format = audio_format_from_pcm_format(proxy_config.format); |
| } |
| } |
| |
| /* Channels */ |
| bool calc_mask = false; |
| if (config->channel_mask == AUDIO_CHANNEL_NONE) { |
| /* query case */ |
| out->hal_channel_count = profile_get_default_channel_count(&device_info->profile); |
| calc_mask = true; |
| } else { |
| /* explicit case */ |
| out->hal_channel_count = audio_channel_count_from_out_mask(config->channel_mask); |
| } |
| |
| /* The Framework is currently limited to no more than this number of channels */ |
| if (out->hal_channel_count > FCC_LIMIT) { |
| out->hal_channel_count = FCC_LIMIT; |
| calc_mask = true; |
| } |
| |
| if (calc_mask) { |
| /* need to calculate the mask from channel count either because this is the query case |
| * or the specified mask isn't valid for this device, or is more than the FW can handle */ |
| config->channel_mask = out->hal_channel_count <= FCC_2 |
| /* position mask for mono and stereo*/ |
| ? audio_channel_out_mask_from_count(out->hal_channel_count) |
| /* otherwise indexed */ |
| : audio_channel_mask_for_index_assignment_from_count(out->hal_channel_count); |
| } |
| |
| out->hal_channel_mask = config->channel_mask; |
| |
| // Validate the "logical" channel count against support in the "actual" profile. |
| // if they differ, choose the "actual" number of channels *closest* to the "logical". |
| // and store THAT in proxy_config.channels |
| proxy_config.channels = |
| profile_get_closest_channel_count(&device_info->profile, out->hal_channel_count); |
| if (is_bit_perfect && proxy_config.channels != out->hal_channel_count) { |
| ALOGE("%s request bit-perfect, but channel mask(%#x) cannot find exact match", |
| __func__, config->channel_mask); |
| return -EINVAL; |
| } |
| |
| ret = proxy_prepare(&device_info->proxy, &device_info->profile, &proxy_config, is_bit_perfect); |
| if (is_bit_perfect && ret != 0) { |
| ALOGE("%s failed to prepare proxy for bit-perfect playback, err=%d", __func__, ret); |
| return ret; |
| } |
| out->config = proxy_config; |
| |
| list_add_tail(&out->alsa_devices, &device_info->list_node); |
| |
| if ((flags & AUDIO_OUTPUT_FLAG_BIT_PERFECT) != AUDIO_OUTPUT_FLAG_NONE) { |
| out_stream_find_mixer_volume_control(out, device_info->profile.card); |
| } |
| |
| /* TODO The retry mechanism isn't implemented in AudioPolicyManager/AudioFlinger |
| * So clear any errors that may have occurred above. |
| */ |
| ret = 0; |
| |
| out->conversion_buffer = NULL; |
| out->conversion_buffer_size = 0; |
| |
| out->standby = true; |
| |
| /* Save the stream for adev_dump() */ |
| adev_add_stream_to_list(out->adev, &out->adev->output_stream_list, &out->list_node); |
| |
| *stream_out = &out->stream; |
| |
| return ret; |
| } |
| |
| static void adev_close_output_stream(struct audio_hw_device *hw_dev, |
| struct audio_stream_out *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| stream_lock(&out->lock); |
| /* Close the pcm device */ |
| stream_standby_l(&out->alsa_devices, &out->standby); |
| stream_clear_devices(&out->alsa_devices); |
| |
| free(out->conversion_buffer); |
| |
| out->conversion_buffer = NULL; |
| out->conversion_buffer_size = 0; |
| |
| if (out->volume_ctl != NULL) { |
| for (int i = 0; i < out->volume_ctl_num_values; ++i) { |
| mixer_ctl_set_value(out->volume_ctl, i, out->max_volume_level); |
| } |
| out->volume_ctl = NULL; |
| } |
| if (out->mixer != NULL) { |
| mixer_close(out->mixer); |
| out->mixer = NULL; |
| } |
| |
| device_lock(out->adev); |
| list_remove(&out->list_node); |
| out->adev->device_sample_rate = 0; |
| device_unlock(out->adev); |
| stream_unlock(&out->lock); |
| |
| free(stream); |
| } |
| |
| static size_t adev_get_input_buffer_size(const struct audio_hw_device *hw_dev, |
| const struct audio_config *config) |
| { |
| /* TODO This needs to be calculated based on format/channels/rate */ |
| return 320; |
| } |
| |
| /* |
| * IN functions |
| */ |
| static uint32_t in_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct alsa_device_info *device_info = stream_get_first_alsa_device( |
| &((const struct stream_in *)stream)->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return 0; |
| } |
| uint32_t rate = proxy_get_sample_rate(&device_info->proxy); |
| ALOGV("in_get_sample_rate() = %d", rate); |
| return rate; |
| } |
| |
| static int in_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| ALOGV("in_set_sample_rate(%d) - NOPE", rate); |
| return -ENOSYS; |
| } |
| |
| static size_t in_get_buffer_size(const struct audio_stream *stream) |
| { |
| const struct stream_in * in = ((const struct stream_in*)stream); |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return 0; |
| } |
| return proxy_get_period_size(&device_info->proxy) * audio_stream_in_frame_size(&(in->stream)); |
| } |
| |
| static uint32_t in_get_channels(const struct audio_stream *stream) |
| { |
| const struct stream_in *in = (const struct stream_in*)stream; |
| return in->hal_channel_mask; |
| } |
| |
| static audio_format_t in_get_format(const struct audio_stream *stream) |
| { |
| struct alsa_device_info *device_info = stream_get_first_alsa_device( |
| &((const struct stream_in *)stream)->alsa_devices); |
| if (device_info == NULL) { |
| ALOGW("%s device info is null", __func__); |
| return AUDIO_FORMAT_DEFAULT; |
| } |
| alsa_device_proxy *proxy = &device_info->proxy; |
| audio_format_t format = audio_format_from_pcm_format(proxy_get_format(proxy)); |
| return format; |
| } |
| |
| static int in_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| ALOGV("in_set_format(%d) - NOPE", format); |
| |
| return -ENOSYS; |
| } |
| |
| static int in_standby(struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| stream_lock(&in->lock); |
| device_lock(in->adev); |
| stream_standby_l(&in->alsa_devices, &in->standby); |
| device_unlock(in->adev); |
| stream_unlock(&in->lock); |
| return 0; |
| } |
| |
| static int in_dump(const struct audio_stream *stream, int fd) |
| { |
| const struct stream_in* in_stream = (const struct stream_in*)stream; |
| if (in_stream != NULL) { |
| stream_dump_alsa_devices(&in_stream->alsa_devices, fd); |
| } |
| |
| return 0; |
| } |
| |
| static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| ALOGV("in_set_parameters() keys:%s", kvpairs); |
| |
| // The set parameters here only matters when the routing devices are changed. |
| // When the device version higher than 3.0, the framework will use create_audio_patch |
| // API instead of set_parameters to change audio routing. |
| return 0; |
| } |
| |
| static char * in_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| stream_lock(&in->lock); |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| char *params_str = NULL; |
| if (device_info != NULL) { |
| params_str = device_get_parameters(&device_info->profile, keys); |
| } |
| stream_unlock(&in->lock); |
| |
| return params_str; |
| } |
| |
| static int in_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int in_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int in_set_gain(struct audio_stream_in *stream, float gain) |
| { |
| return 0; |
| } |
| |
| /* must be called with hw device and output stream mutexes locked */ |
| static int start_input_stream(struct stream_in *in) |
| { |
| // Only care about the first device as only one input device is allowed. |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| if (device_info == NULL) { |
| return -ENODEV; |
| } |
| |
| ALOGV("start_input_stream(card:%d device:%d)", |
| device_info->profile.card, device_info->profile.device); |
| return proxy_open(&device_info->proxy); |
| } |
| |
| /* TODO mutex stuff here (see out_write) */ |
| static ssize_t in_read(struct audio_stream_in *stream, void* buffer, size_t bytes) |
| { |
| size_t num_read_buff_bytes = 0; |
| void * read_buff = buffer; |
| void * out_buff = buffer; |
| int ret = 0; |
| |
| struct stream_in * in = (struct stream_in *)stream; |
| |
| stream_lock(&in->lock); |
| if (in->standby) { |
| ret = start_input_stream(in); |
| if (ret != 0) { |
| goto err; |
| } |
| in->standby = false; |
| } |
| |
| // Only care about the first device as only one input device is allowed. |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| if (device_info == NULL) { |
| return 0; |
| } |
| |
| /* |
| * OK, we need to figure out how much data to read to be able to output the requested |
| * number of bytes in the HAL format (16-bit, stereo). |
| */ |
| num_read_buff_bytes = bytes; |
| int num_device_channels = proxy_get_channel_count(&device_info->proxy); /* what we told Alsa */ |
| int num_req_channels = in->hal_channel_count; /* what we told AudioFlinger */ |
| |
| if (num_device_channels != num_req_channels) { |
| num_read_buff_bytes = (num_device_channels * num_read_buff_bytes) / num_req_channels; |
| } |
| |
| /* Setup/Realloc the conversion buffer (if necessary). */ |
| if (num_read_buff_bytes != bytes) { |
| if (num_read_buff_bytes > in->conversion_buffer_size) { |
| /*TODO Remove this when AudioPolicyManger/AudioFlinger support arbitrary formats |
| (and do these conversions themselves) */ |
| in->conversion_buffer_size = num_read_buff_bytes; |
| in->conversion_buffer = realloc(in->conversion_buffer, in->conversion_buffer_size); |
| } |
| read_buff = in->conversion_buffer; |
| } |
| |
| ret = proxy_read(&device_info->proxy, read_buff, num_read_buff_bytes); |
| if (ret == 0) { |
| if (num_device_channels != num_req_channels) { |
| // ALOGV("chans dev:%d req:%d", num_device_channels, num_req_channels); |
| |
| out_buff = buffer; |
| /* Num Channels conversion */ |
| if (num_device_channels != num_req_channels) { |
| audio_format_t audio_format = in_get_format(&(in->stream.common)); |
| unsigned sample_size_in_bytes = audio_bytes_per_sample(audio_format); |
| |
| num_read_buff_bytes = |
| adjust_channels(read_buff, num_device_channels, |
| out_buff, num_req_channels, |
| sample_size_in_bytes, num_read_buff_bytes); |
| } |
| } |
| |
| /* no need to acquire in->adev->lock to read mic_muted here as we don't change its state */ |
| if (num_read_buff_bytes > 0 && in->adev->mic_muted) |
| memset(buffer, 0, num_read_buff_bytes); |
| } else { |
| num_read_buff_bytes = 0; // reset the value after USB headset is unplugged |
| } |
| |
| err: |
| stream_unlock(&in->lock); |
| return num_read_buff_bytes; |
| } |
| |
| static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream) |
| { |
| return 0; |
| } |
| |
| static int in_get_capture_position(const struct audio_stream_in *stream, |
| int64_t *frames, int64_t *time) |
| { |
| struct stream_in *in = (struct stream_in *)stream; // discard const qualifier |
| stream_lock(&in->lock); |
| |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| |
| const int ret = device_info == NULL ? -ENODEV |
| : proxy_get_capture_position(&device_info->proxy, frames, time); |
| |
| stream_unlock(&in->lock); |
| return ret; |
| } |
| |
| static int in_get_active_microphones(const struct audio_stream_in *stream, |
| struct audio_microphone_characteristic_t *mic_array, |
| size_t *mic_count) { |
| (void)stream; |
| (void)mic_array; |
| (void)mic_count; |
| |
| return -ENOSYS; |
| } |
| |
| static int in_set_microphone_direction(const struct audio_stream_in *stream, |
| audio_microphone_direction_t dir) { |
| (void)stream; |
| (void)dir; |
| ALOGV("---- in_set_microphone_direction()"); |
| return -ENOSYS; |
| } |
| |
| static int in_set_microphone_field_dimension(const struct audio_stream_in *stream, float zoom) { |
| (void)zoom; |
| ALOGV("---- in_set_microphone_field_dimension()"); |
| return -ENOSYS; |
| } |
| |
| static int adev_open_input_stream(struct audio_hw_device *hw_dev, |
| audio_io_handle_t handle, |
| audio_devices_t devicesSpec __unused, |
| struct audio_config *config, |
| struct audio_stream_in **stream_in, |
| audio_input_flags_t flags __unused, |
| const char *address, |
| audio_source_t source __unused) |
| { |
| ALOGV("adev_open_input_stream() rate:%" PRIu32 ", chanMask:0x%" PRIX32 ", fmt:%" PRIu8, |
| config->sample_rate, config->channel_mask, config->format); |
| |
| /* Pull out the card/device pair */ |
| int32_t card, device; |
| if (!parse_card_device_params(address, &card, &device)) { |
| ALOGW("%s fail - invalid address %s", __func__, address); |
| *stream_in = NULL; |
| return -EINVAL; |
| } |
| |
| struct stream_in * const in = (struct stream_in *)calloc(1, sizeof(struct stream_in)); |
| if (in == NULL) { |
| *stream_in = NULL; |
| return -ENOMEM; |
| } |
| |
| /* setup function pointers */ |
| in->stream.common.get_sample_rate = in_get_sample_rate; |
| in->stream.common.set_sample_rate = in_set_sample_rate; |
| in->stream.common.get_buffer_size = in_get_buffer_size; |
| in->stream.common.get_channels = in_get_channels; |
| in->stream.common.get_format = in_get_format; |
| in->stream.common.set_format = in_set_format; |
| in->stream.common.standby = in_standby; |
| in->stream.common.dump = in_dump; |
| in->stream.common.set_parameters = in_set_parameters; |
| in->stream.common.get_parameters = in_get_parameters; |
| in->stream.common.add_audio_effect = in_add_audio_effect; |
| in->stream.common.remove_audio_effect = in_remove_audio_effect; |
| |
| in->stream.set_gain = in_set_gain; |
| in->stream.read = in_read; |
| in->stream.get_input_frames_lost = in_get_input_frames_lost; |
| in->stream.get_capture_position = in_get_capture_position; |
| |
| in->stream.get_active_microphones = in_get_active_microphones; |
| in->stream.set_microphone_direction = in_set_microphone_direction; |
| in->stream.set_microphone_field_dimension = in_set_microphone_field_dimension; |
| |
| in->handle = handle; |
| |
| stream_lock_init(&in->lock); |
| |
| in->adev = (struct audio_device *)hw_dev; |
| |
| list_init(&in->alsa_devices); |
| struct alsa_device_info *device_info = |
| (struct alsa_device_info *)calloc(1, sizeof(struct alsa_device_info)); |
| profile_init(&device_info->profile, PCM_IN); |
| |
| memset(&in->config, 0, sizeof(in->config)); |
| |
| int ret = 0; |
| device_lock(in->adev); |
| int num_open_inputs = in->adev->inputs_open; |
| device_unlock(in->adev); |
| |
| /* Check if an input stream is already open */ |
| if (num_open_inputs > 0) { |
| if (!profile_is_cached_for(&device_info->profile, card, device)) { |
| ALOGW("%s fail - address card:%d device:%d doesn't match existing profile", |
| __func__, card, device); |
| ret = -EINVAL; |
| } |
| } else { |
| /* Read input profile only if necessary */ |
| device_info->profile.card = card; |
| device_info->profile.device = device; |
| if (!profile_read_device_info(&device_info->profile)) { |
| ALOGW("%s fail - cannot read profile", __func__); |
| ret = -EINVAL; |
| } |
| } |
| if (ret != 0) { |
| free(in); |
| *stream_in = NULL; |
| return ret; |
| } |
| |
| /* Rate */ |
| int request_config_rate = config->sample_rate; |
| if (config->sample_rate == 0) { |
| config->sample_rate = profile_get_default_sample_rate(&device_info->profile); |
| } |
| |
| if (in->adev->device_sample_rate != 0 && /* we are playing, so lock the rate if possible */ |
| in->adev->device_sample_rate >= RATELOCK_THRESHOLD) {/* but only for high sample rates */ |
| if (config->sample_rate != in->adev->device_sample_rate) { |
| unsigned highest_rate = profile_get_highest_sample_rate(&device_info->profile); |
| if (highest_rate == 0) { |
| ret = -EINVAL; /* error with device */ |
| } else { |
| in->config.rate = config->sample_rate = |
| min(highest_rate, in->adev->device_sample_rate); |
| if (request_config_rate != 0 && in->config.rate != config->sample_rate) { |
| /* Changing the requested rate */ |
| ret = -EINVAL; |
| } else { |
| /* Everything AOK! */ |
| ret = 0; |
| } |
| } |
| } |
| } else if (profile_is_sample_rate_valid(&device_info->profile, config->sample_rate)) { |
| in->config.rate = config->sample_rate; |
| } else { |
| in->config.rate = config->sample_rate = |
| profile_get_default_sample_rate(&device_info->profile); |
| ret = -EINVAL; |
| } |
| |
| /* Format */ |
| if (config->format == AUDIO_FORMAT_DEFAULT) { |
| in->config.format = profile_get_default_format(&device_info->profile); |
| config->format = audio_format_from_pcm_format(in->config.format); |
| } else { |
| enum pcm_format fmt = pcm_format_from_audio_format(config->format); |
| if (profile_is_format_valid(&device_info->profile, fmt)) { |
| in->config.format = fmt; |
| } else { |
| in->config.format = profile_get_default_format(&device_info->profile); |
| config->format = audio_format_from_pcm_format(in->config.format); |
| ret = -EINVAL; |
| } |
| } |
| |
| /* Channels */ |
| bool calc_mask = false; |
| if (config->channel_mask == AUDIO_CHANNEL_NONE) { |
| /* query case */ |
| in->hal_channel_count = profile_get_default_channel_count(&device_info->profile); |
| calc_mask = true; |
| } else { |
| /* explicit case */ |
| in->hal_channel_count = audio_channel_count_from_in_mask(config->channel_mask); |
| } |
| |
| /* The Framework is currently limited to no more than this number of channels */ |
| if (in->hal_channel_count > FCC_LIMIT) { |
| in->hal_channel_count = FCC_LIMIT; |
| calc_mask = true; |
| } |
| |
| if (calc_mask) { |
| /* need to calculate the mask from channel count either because this is the query case |
| * or the specified mask isn't valid for this device, or is more than the FW can handle */ |
| in->hal_channel_mask = in->hal_channel_count <= FCC_2 |
| /* position mask for mono & stereo */ |
| ? audio_channel_in_mask_from_count(in->hal_channel_count) |
| /* otherwise indexed */ |
| : audio_channel_mask_for_index_assignment_from_count(in->hal_channel_count); |
| |
| // if we change the mask... |
| if (in->hal_channel_mask != config->channel_mask && |
| config->channel_mask != AUDIO_CHANNEL_NONE) { |
| config->channel_mask = in->hal_channel_mask; |
| ret = -EINVAL; |
| } |
| } else { |
| in->hal_channel_mask = config->channel_mask; |
| } |
| |
| if (ret == 0) { |
| // Validate the "logical" channel count against support in the "actual" profile. |
| // if they differ, choose the "actual" number of channels *closest* to the "logical". |
| // and store THAT in proxy_config.channels |
| in->config.channels = |
| profile_get_closest_channel_count(&device_info->profile, in->hal_channel_count); |
| ret = proxy_prepare(&device_info->proxy, &device_info->profile, &in->config, |
| false /*require_exact_match*/); |
| if (ret == 0) { |
| in->standby = true; |
| |
| in->conversion_buffer = NULL; |
| in->conversion_buffer_size = 0; |
| |
| *stream_in = &in->stream; |
| |
| /* Save this for adev_dump() */ |
| adev_add_stream_to_list(in->adev, &in->adev->input_stream_list, &in->list_node); |
| } else { |
| ALOGW("proxy_prepare error %d", ret); |
| unsigned channel_count = proxy_get_channel_count(&device_info->proxy); |
| config->channel_mask = channel_count <= FCC_2 |
| ? audio_channel_in_mask_from_count(channel_count) |
| : audio_channel_mask_for_index_assignment_from_count(channel_count); |
| config->format = audio_format_from_pcm_format(proxy_get_format(&device_info->proxy)); |
| config->sample_rate = proxy_get_sample_rate(&device_info->proxy); |
| } |
| } |
| |
| if (ret != 0) { |
| // Deallocate this stream on error, because AudioFlinger won't call |
| // adev_close_input_stream() in this case. |
| *stream_in = NULL; |
| free(in); |
| return ret; |
| } |
| |
| list_add_tail(&in->alsa_devices, &device_info->list_node); |
| |
| device_lock(in->adev); |
| ++in->adev->inputs_open; |
| device_unlock(in->adev); |
| |
| return ret; |
| } |
| |
| static void adev_close_input_stream(struct audio_hw_device *hw_dev, |
| struct audio_stream_in *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| stream_lock(&in->lock); |
| device_lock(in->adev); |
| list_remove(&in->list_node); |
| --in->adev->inputs_open; |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(&in->alsa_devices); |
| if (device_info != NULL) { |
| ALOGV("adev_close_input_stream(c:%d d:%d)", |
| device_info->profile.card, device_info->profile.device); |
| } |
| LOG_ALWAYS_FATAL_IF(in->adev->inputs_open < 0, |
| "invalid inputs_open: %d", in->adev->inputs_open); |
| |
| stream_standby_l(&in->alsa_devices, &in->standby); |
| |
| device_unlock(in->adev); |
| |
| stream_clear_devices(&in->alsa_devices); |
| stream_unlock(&in->lock); |
| |
| free(in->conversion_buffer); |
| |
| free(stream); |
| } |
| |
| /* |
| * ADEV Functions |
| */ |
| static int adev_set_parameters(struct audio_hw_device *hw_dev, const char *kvpairs) |
| { |
| return 0; |
| } |
| |
| static char * adev_get_parameters(const struct audio_hw_device *hw_dev, const char *keys) |
| { |
| return strdup(""); |
| } |
| |
| static int adev_init_check(const struct audio_hw_device *hw_dev) |
| { |
| return 0; |
| } |
| |
| static int adev_set_voice_volume(struct audio_hw_device *hw_dev, float volume) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_master_volume(struct audio_hw_device *hw_dev, float volume) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_mode(struct audio_hw_device *hw_dev, audio_mode_t mode) |
| { |
| return 0; |
| } |
| |
| static int adev_set_mic_mute(struct audio_hw_device *hw_dev, bool state) |
| { |
| struct audio_device * adev = (struct audio_device *)hw_dev; |
| device_lock(adev); |
| adev->mic_muted = state; |
| device_unlock(adev); |
| return -ENOSYS; |
| } |
| |
| static int adev_get_mic_mute(const struct audio_hw_device *hw_dev, bool *state) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_create_audio_patch(struct audio_hw_device *dev, |
| unsigned int num_sources, |
| const struct audio_port_config *sources, |
| unsigned int num_sinks, |
| const struct audio_port_config *sinks, |
| audio_patch_handle_t *handle) { |
| if (num_sources != 1 || num_sinks == 0 || num_sinks > AUDIO_PATCH_PORTS_MAX) { |
| // Only accept mix->device and device->mix cases. In that case, the number of sources |
| // must be 1. The number of sinks must be in the range of (0, AUDIO_PATCH_PORTS_MAX]. |
| return -EINVAL; |
| } |
| |
| if (sources[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| // If source is a device, the number of sinks should be 1. |
| if (num_sinks != 1 || sinks[0].type != AUDIO_PORT_TYPE_MIX) { |
| return -EINVAL; |
| } |
| } else if (sources[0].type == AUDIO_PORT_TYPE_MIX) { |
| // If source is a mix, all sinks should be device. |
| for (unsigned int i = 0; i < num_sinks; i++) { |
| if (sinks[i].type != AUDIO_PORT_TYPE_DEVICE) { |
| ALOGE("%s() invalid sink type %#x for mix source", __func__, sinks[i].type); |
| return -EINVAL; |
| } |
| } |
| } else { |
| // All other cases are invalid. |
| return -EINVAL; |
| } |
| |
| struct audio_device* adev = (struct audio_device*) dev; |
| bool generatedPatchHandle = false; |
| device_lock(adev); |
| if (*handle == AUDIO_PATCH_HANDLE_NONE) { |
| *handle = ++adev->next_patch_handle; |
| generatedPatchHandle = true; |
| } |
| |
| int cards[AUDIO_PATCH_PORTS_MAX]; |
| int devices[AUDIO_PATCH_PORTS_MAX]; |
| const struct audio_port_config *port_configs = |
| sources[0].type == AUDIO_PORT_TYPE_DEVICE ? sources : sinks; |
| int num_configs = 0; |
| audio_io_handle_t io_handle = 0; |
| bool wasStandby = true; |
| int direction = PCM_OUT; |
| audio_patch_handle_t *patch_handle = NULL; |
| struct listnode *alsa_devices = NULL; |
| struct stream_lock *lock = NULL; |
| struct pcm_config *config = NULL; |
| struct stream_in *in = NULL; |
| struct stream_out *out = NULL; |
| bool is_bit_perfect = false; |
| |
| unsigned int num_saved_devices = 0; |
| int saved_cards[AUDIO_PATCH_PORTS_MAX]; |
| int saved_devices[AUDIO_PATCH_PORTS_MAX]; |
| |
| struct listnode *node; |
| |
| // Only handle patches for mix->devices and device->mix case. |
| if (sources[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| in = adev_get_stream_in_by_io_handle_l(adev, sinks[0].ext.mix.handle); |
| if (in == NULL) { |
| ALOGE("%s()can not find stream with handle(%d)", __func__, sinks[0].ext.mix.handle); |
| device_unlock(adev); |
| return -EINVAL; |
| } |
| |
| direction = PCM_IN; |
| wasStandby = in->standby; |
| io_handle = in->handle; |
| num_configs = num_sources; |
| patch_handle = &in->patch_handle; |
| alsa_devices = &in->alsa_devices; |
| lock = &in->lock; |
| config = &in->config; |
| } else { |
| out = adev_get_stream_out_by_io_handle_l(adev, sources[0].ext.mix.handle); |
| if (out == NULL) { |
| ALOGE("%s()can not find stream with handle(%d)", __func__, sources[0].ext.mix.handle); |
| device_unlock(adev); |
| return -EINVAL; |
| } |
| |
| direction = PCM_OUT; |
| wasStandby = out->standby; |
| io_handle = out->handle; |
| num_configs = num_sinks; |
| patch_handle = &out->patch_handle; |
| alsa_devices = &out->alsa_devices; |
| lock = &out->lock; |
| config = &out->config; |
| is_bit_perfect = out->is_bit_perfect; |
| } |
| |
| // Check if the patch handle match the recorded one if a valid patch handle is passed. |
| if (!generatedPatchHandle && *patch_handle != *handle) { |
| ALOGE("%s() the patch handle(%d) does not match recorded one(%d) for stream " |
| "with handle(%d) when creating audio patch", |
| __func__, *handle, *patch_handle, io_handle); |
| device_unlock(adev); |
| return -EINVAL; |
| } |
| device_unlock(adev); |
| |
| for (unsigned int i = 0; i < num_configs; ++i) { |
| if (!parse_card_device_params(port_configs[i].ext.device.address, &cards[i], &devices[i])) { |
| ALOGE("%s, failed to parse card and device %s", |
| __func__, port_configs[i].ext.device.address); |
| return -EINVAL; |
| } |
| } |
| |
| stream_lock(lock); |
| list_for_each (node, alsa_devices) { |
| struct alsa_device_info *device_info = |
| node_to_item(node, struct alsa_device_info, list_node); |
| saved_cards[num_saved_devices] = device_info->profile.card; |
| saved_devices[num_saved_devices++] = device_info->profile.device; |
| } |
| |
| if (are_devices_the_same( |
| num_configs, cards, devices, num_saved_devices, saved_cards, saved_devices)) { |
| // The new devices are the same as original ones. No need to update. |
| stream_unlock(lock); |
| return 0; |
| } |
| |
| device_lock(adev); |
| stream_standby_l(alsa_devices, out == NULL ? &in->standby : &out->standby); |
| device_unlock(adev); |
| |
| // Timestamps: |
| // Audio timestamps assume continuous PCM frame counts which are maintained |
| // with the device proxy.transferred variable. Technically it would be better |
| // associated with in or out stream, not the device; here we save and restore |
| // using the first alsa device as a simplification. |
| uint64_t saved_transferred_frames = 0; |
| struct alsa_device_info *device_info = stream_get_first_alsa_device(alsa_devices); |
| if (device_info != NULL) saved_transferred_frames = device_info->proxy.transferred; |
| |
| int ret = stream_set_new_devices( |
| config, alsa_devices, num_configs, cards, devices, direction, is_bit_perfect); |
| |
| if (ret != 0) { |
| *handle = generatedPatchHandle ? AUDIO_PATCH_HANDLE_NONE : *handle; |
| stream_set_new_devices( |
| config, alsa_devices, num_saved_devices, saved_cards, saved_devices, direction, |
| is_bit_perfect); |
| } else { |
| *patch_handle = *handle; |
| } |
| |
| // Timestamps: Restore transferred frames. |
| if (saved_transferred_frames != 0) { |
| device_info = stream_get_first_alsa_device(alsa_devices); |
| if (device_info != NULL) device_info->proxy.transferred = saved_transferred_frames; |
| } |
| |
| if (!wasStandby) { |
| device_lock(adev); |
| if (in != NULL) { |
| start_input_stream(in); |
| } |
| if (out != NULL) { |
| start_output_stream(out); |
| } |
| device_unlock(adev); |
| } |
| stream_unlock(lock); |
| return ret; |
| } |
| |
| static int adev_release_audio_patch(struct audio_hw_device *dev, |
| audio_patch_handle_t patch_handle) |
| { |
| struct audio_device* adev = (struct audio_device*) dev; |
| |
| device_lock(adev); |
| struct stream_out *out = adev_get_stream_out_by_patch_handle_l(adev, patch_handle); |
| device_unlock(adev); |
| if (out != NULL) { |
| stream_lock(&out->lock); |
| device_lock(adev); |
| stream_standby_l(&out->alsa_devices, &out->standby); |
| device_unlock(adev); |
| out->patch_handle = AUDIO_PATCH_HANDLE_NONE; |
| stream_unlock(&out->lock); |
| return 0; |
| } |
| |
| device_lock(adev); |
| struct stream_in *in = adev_get_stream_in_by_patch_handle_l(adev, patch_handle); |
| device_unlock(adev); |
| if (in != NULL) { |
| stream_lock(&in->lock); |
| device_lock(adev); |
| stream_standby_l(&in->alsa_devices, &in->standby); |
| device_unlock(adev); |
| in->patch_handle = AUDIO_PATCH_HANDLE_NONE; |
| stream_unlock(&in->lock); |
| return 0; |
| } |
| |
| ALOGE("%s cannot find stream with patch handle as %d", __func__, patch_handle); |
| return -EINVAL; |
| } |
| |
| static int adev_get_audio_port(struct audio_hw_device *dev, struct audio_port *port) |
| { |
| if (port->type != AUDIO_PORT_TYPE_DEVICE) { |
| return -EINVAL; |
| } |
| |
| alsa_device_profile profile; |
| const bool is_output = audio_is_output_device(port->ext.device.type); |
| profile_init(&profile, is_output ? PCM_OUT : PCM_IN); |
| if (!parse_card_device_params(port->ext.device.address, &profile.card, &profile.device)) { |
| return -EINVAL; |
| } |
| |
| if (!profile_read_device_info(&profile)) { |
| return -ENOENT; |
| } |
| |
| port->num_formats = 0;; |
| for (size_t i = 0; i < min(MAX_PROFILE_FORMATS, AUDIO_PORT_MAX_FORMATS) && |
| profile.formats[i] != 0; ++i) { |
| audio_format_t format = audio_format_from(profile.formats[i]); |
| if (format != AUDIO_FORMAT_INVALID) { |
| port->formats[port->num_formats++] = format; |
| } |
| } |
| |
| port->num_sample_rates = populate_sample_rates_from_profile(&profile, port->sample_rates); |
| port->num_channel_masks = populate_channel_mask_from_profile( |
| &profile, is_output, port->channel_masks); |
| |
| return 0; |
| } |
| |
| static int adev_get_audio_port_v7(struct audio_hw_device *dev, struct audio_port_v7 *port) |
| { |
| if (port->type != AUDIO_PORT_TYPE_DEVICE) { |
| return -EINVAL; |
| } |
| |
| alsa_device_profile profile; |
| const bool is_output = audio_is_output_device(port->ext.device.type); |
| profile_init(&profile, is_output ? PCM_OUT : PCM_IN); |
| if (!parse_card_device_params(port->ext.device.address, &profile.card, &profile.device)) { |
| return -EINVAL; |
| } |
| |
| if (!profile_read_device_info(&profile)) { |
| return -ENOENT; |
| } |
| |
| audio_channel_mask_t channel_masks[AUDIO_PORT_MAX_CHANNEL_MASKS]; |
| unsigned int num_channel_masks = populate_channel_mask_from_profile( |
| &profile, is_output, channel_masks); |
| unsigned int sample_rates[AUDIO_PORT_MAX_SAMPLING_RATES]; |
| const unsigned int num_sample_rates = |
| populate_sample_rates_from_profile(&profile, sample_rates); |
| port->num_audio_profiles = 0;; |
| for (size_t i = 0; i < min(MAX_PROFILE_FORMATS, AUDIO_PORT_MAX_AUDIO_PROFILES) && |
| profile.formats[i] != 0; ++i) { |
| audio_format_t format = audio_format_from(profile.formats[i]); |
| if (format == AUDIO_FORMAT_INVALID) { |
| continue; |
| } |
| const unsigned int j = port->num_audio_profiles++; |
| port->audio_profiles[j].format = format; |
| port->audio_profiles[j].num_sample_rates = num_sample_rates; |
| memcpy(port->audio_profiles[j].sample_rates, |
| sample_rates, |
| num_sample_rates * sizeof(unsigned int)); |
| port->audio_profiles[j].num_channel_masks = num_channel_masks; |
| memcpy(port->audio_profiles[j].channel_masks, |
| channel_masks, |
| num_channel_masks* sizeof(audio_channel_mask_t)); |
| } |
| |
| return 0; |
| } |
| |
| static int adev_dump(const struct audio_hw_device *device, int fd) |
| { |
| dprintf(fd, "\nUSB audio module:\n"); |
| |
| struct audio_device* adev = (struct audio_device*)device; |
| const int kNumRetries = 3; |
| const int kSleepTimeMS = 500; |
| |
| // use device_try_lock() in case we dumpsys during a deadlock |
| int retry = kNumRetries; |
| while (retry > 0 && device_try_lock(adev) != 0) { |
| sleep(kSleepTimeMS); |
| retry--; |
| } |
| |
| if (retry > 0) { |
| if (list_empty(&adev->output_stream_list)) { |
| dprintf(fd, " No output streams.\n"); |
| } else { |
| struct listnode* node; |
| list_for_each(node, &adev->output_stream_list) { |
| struct audio_stream* stream = |
| (struct audio_stream *)node_to_item(node, struct stream_out, list_node); |
| out_dump(stream, fd); |
| } |
| } |
| |
| if (list_empty(&adev->input_stream_list)) { |
| dprintf(fd, "\n No input streams.\n"); |
| } else { |
| struct listnode* node; |
| list_for_each(node, &adev->input_stream_list) { |
| struct audio_stream* stream = |
| (struct audio_stream *)node_to_item(node, struct stream_in, list_node); |
| in_dump(stream, fd); |
| } |
| } |
| |
| device_unlock(adev); |
| } else { |
| // Couldn't lock |
| dprintf(fd, " Could not obtain device lock.\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int adev_close(hw_device_t *device) |
| { |
| free(device); |
| |
| return 0; |
| } |
| |
| static int adev_open(const hw_module_t* module, const char* name, hw_device_t** device) |
| { |
| if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0) |
| return -EINVAL; |
| |
| struct audio_device *adev = calloc(1, sizeof(struct audio_device)); |
| if (!adev) |
| return -ENOMEM; |
| |
| pthread_mutex_init(&adev->lock, (const pthread_mutexattr_t *) NULL); |
| |
| list_init(&adev->output_stream_list); |
| list_init(&adev->input_stream_list); |
| |
| adev->hw_device.common.tag = HARDWARE_DEVICE_TAG; |
| adev->hw_device.common.version = AUDIO_DEVICE_API_VERSION_3_2; |
| adev->hw_device.common.module = (struct hw_module_t *)module; |
| adev->hw_device.common.close = adev_close; |
| |
| adev->hw_device.init_check = adev_init_check; |
| adev->hw_device.set_voice_volume = adev_set_voice_volume; |
| adev->hw_device.set_master_volume = adev_set_master_volume; |
| adev->hw_device.set_mode = adev_set_mode; |
| adev->hw_device.set_mic_mute = adev_set_mic_mute; |
| adev->hw_device.get_mic_mute = adev_get_mic_mute; |
| adev->hw_device.set_parameters = adev_set_parameters; |
| adev->hw_device.get_parameters = adev_get_parameters; |
| adev->hw_device.get_input_buffer_size = adev_get_input_buffer_size; |
| adev->hw_device.open_output_stream = adev_open_output_stream; |
| adev->hw_device.close_output_stream = adev_close_output_stream; |
| adev->hw_device.open_input_stream = adev_open_input_stream; |
| adev->hw_device.close_input_stream = adev_close_input_stream; |
| adev->hw_device.create_audio_patch = adev_create_audio_patch; |
| adev->hw_device.release_audio_patch = adev_release_audio_patch; |
| adev->hw_device.get_audio_port = adev_get_audio_port; |
| adev->hw_device.get_audio_port_v7 = adev_get_audio_port_v7; |
| adev->hw_device.dump = adev_dump; |
| |
| *device = &adev->hw_device.common; |
| |
| return 0; |
| } |
| |
| static struct hw_module_methods_t hal_module_methods = { |
| .open = adev_open, |
| }; |
| |
| struct audio_module HAL_MODULE_INFO_SYM = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = AUDIO_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = AUDIO_HARDWARE_MODULE_ID, |
| .name = "USB audio HW HAL", |
| .author = "The Android Open Source Project", |
| .methods = &hal_module_methods, |
| }, |
| }; |