| /* |
| * Copyright (C) 2020 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.radio@1.6; |
| |
| |
| import @1.0::CdmaSmsMessage; |
| import @1.0::Dial; |
| import @1.0::GsmSmsMessage; |
| import @1.1::CardPowerState; |
| import @1.2::DataRequestReason; |
| import @1.4::EmergencyCallRouting; |
| import @1.4::EmergencyServiceCategory; |
| import @1.4::RadioAccessFamily; |
| import @1.5::IRadio; |
| import @1.5::AccessNetwork; |
| import @1.5::DataProfileInfo; |
| import @1.5::LinkAddress; |
| |
| /** |
| * This interface is used by telephony and telecom to talk to cellular radio. |
| * All the functions have minimum one parameter: |
| * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the |
| * duration of a method call. If clients provide colliding serials (including passing the same |
| * serial to different methods), multiple responses (one for each method call) must still be served. |
| * setResponseFunctions must work with @1.6::IRadioResponse and @1.6::IRadioIndication. |
| */ |
| interface IRadio extends @1.5::IRadio { |
| /** |
| * Toggle radio on and off (for "airplane" mode) |
| * If the radio is turned off/on the radio modem subsystem |
| * is expected return to an initialized state. For instance, |
| * any voice and data calls must be terminated and all associated |
| * lists emptied. |
| * |
| * When setting radio power on to exit from airplane mode to place an emergency call on this |
| * logical modem, powerOn, forEmergencyCall and preferredForEmergencyCall must be true. In |
| * this case, this modem is optimized to scan only emergency call bands, until: |
| * 1) Emergency call is completed; or |
| * 2) Another setRadioPower_1_5 is issued with forEmergencyCall being false or |
| * preferredForEmergencyCall being false; or |
| * 3) Timeout after 30 seconds if dial or emergencyDial is not called. |
| * Once one of these conditions is reached, the modem should move into normal operation. |
| * |
| * @param serial Serial number of request. |
| * @param powerOn To turn on radio -> on = true, to turn off radio -> on = false. |
| * @param forEmergencyCall To indication to radio if this request is due to emergency call. |
| * No effect if powerOn is false. |
| * @param preferredForEmergencyCall indicate whether the following emergency call will be sent |
| * on this modem or not. No effect if forEmergencyCall is false, or powerOn is false. |
| * |
| * Response callback is IRadioConfigResponse. setRadioPowerResponse_1_6. |
| |
| * Note this API is the same as the 1.5 |
| */ |
| oneway setRadioPower_1_6(int32_t serial, bool powerOn, bool forEmergencyCall, |
| bool preferredForEmergencyCall); |
| |
| /** |
| * Returns the data call list. An entry is added when a setupDataCall() is issued and removed |
| * on a deactivateDataCall(). The list is emptied when setRadioPower() off/on issued or when |
| * the vendor HAL or modem crashes. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getDataCallListResponse_1_6() |
| */ |
| oneway getDataCallList_1_6(int32_t serial); |
| |
| /** |
| * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE, |
| * the data connection must be added to data calls and a unsolDataCallListChanged() must be |
| * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be |
| * lost due to many factors, including deactivateDataCall() being issued, the radio powered |
| * off, reception lost or even transient factors like congestion. This data call list is |
| * returned by getDataCallList() and dataCallListChanged(). |
| * |
| * The Radio is expected to: |
| * - Create one data call context. |
| * - Create and configure a dedicated interface for the context. |
| * - The interface must be point to point. |
| * - The interface is configured with one or more addresses and is capable of sending and |
| * receiving packets. The format is IP address with optional "/" prefix length |
| * (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3", |
| * "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If |
| * the prefix length is absent, then the addresses are assumed to be point to point with |
| * IPv4 with prefix length 32 or IPv6 with prefix length 128. |
| * - Must not modify routing configuration related to this interface; routing management is |
| * exclusively within the purview of the Android OS. |
| * - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified |
| * in the response of getDataRegistrationState. |
| * |
| * The differences relative to the 1.5 version of the API are: |
| * - The addition of new parameters pduSessionId, sliceInfo, trafficDescriptor, and |
| * matchAllRuleAllowed. |
| * - If an existing data call should be used for the request, that must be indicated in the |
| * response by setting SetupDataCallResult::cid to the context id of that call. |
| * |
| * @param serial Serial number of request. |
| * @param accessNetwork The access network to setup the data call. If the data connection cannot |
| * be established on the specified access network then it should be responded with an error. |
| * @param dataProfileInfo Data profile info. |
| * @param roamingAllowed Indicates whether or not data roaming is allowed by the user. |
| * @param reason The request reason. Must be DataRequestReason:NORMAL or |
| * DataRequestReason:HANDOVER. |
| * @param addresses If the reason is DataRequestReason:HANDOVER, this indicates the list of link |
| * addresses of the existing data connection. This parameter must be ignored unless reason |
| * is DataRequestReason:HANDOVER. |
| * @param dnses If the reason is DataRequestReason:HANDOVER, this indicates the list of DNS |
| * addresses of the existing data connection. The format is defined in RFC-4291 section 2.2. |
| * For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless reason |
| * is DataRequestReason:HANDOVER. |
| * @param pduSessionId The pdu session id to be used for this data call. A value of 0 means |
| * no pdu session id was attached to this call. |
| * Reference: 3GPP TS 24.007 section 11.2.3.1b |
| * @param sliceInfo SliceInfo to be used for the data connection when a handover occurs from |
| * EPDG to 5G. It is valid only when accessNetwork is AccessNetwork:NGRAN. If the slice |
| * passed from EPDG is rejected, then the data failure cause must be |
| * DataCallFailCause:SLICE_REJECTED. |
| * @param trafficDescriptor TrafficDescriptor for which data connection needs to be |
| * established. It is used for URSP traffic matching as described in TS 24.526 |
| * Section 4.2.2. It includes an optional DNN which, if present, must be used for traffic |
| * matching -- it does not specify the end point to be used for the data call. The end |
| * point is specified by DataProfileInfo.apn; DataProfileInfo.apn must be used as the end |
| * point if one is not specified through URSP rules. |
| * @param matchAllRuleAllowed bool to indicate if using default match-all URSP rule for this |
| * request is allowed. If false, this request must not use the match-all URSP rule and if |
| * a non-match-all rule is not found (or if URSP rules are not available) it should return |
| * failure with cause DataCallFailCause:MATCH_ALL_RULE_NOT_ALLOWED. This is needed as some |
| * requests need to have a hard failure if the intention cannot be met, for example, a |
| * zero-rating slice. |
| * |
| * Response function is IRadioResponse.setupDataCallResponse_1_6() |
| * |
| */ |
| oneway setupDataCall_1_6(int32_t serial, AccessNetwork accessNetwork, |
| DataProfileInfo dataProfileInfo, bool roamingAllowed, |
| DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses, |
| int32_t pduSessionId, OptionalSliceInfo sliceInfo, |
| OptionalTrafficDescriptor trafficDescriptor, bool matchAllRuleAllowed); |
| |
| /** |
| * Send an SMS message |
| * |
| * @param serial Serial number of request. |
| * @param message GsmSmsMessage as defined in types.hal |
| * |
| * Response function is IRadioResponse.sendSmsResponse_1_6() |
| * |
| * Note this API is the same as the 1.0 |
| * |
| * Based on the return error, caller decides to resend if sending sms |
| * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) |
| * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500) |
| */ |
| oneway sendSms_1_6(int32_t serial, GsmSmsMessage message); |
| |
| /** |
| * Send an SMS message. Identical to sendSms_1_6, |
| * except that more messages are expected to be sent soon. If possible, |
| * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command) |
| * |
| * @param serial Serial number of request. |
| * @param message GsmSmsMessage as defined in types.hal |
| * |
| * Response function is IRadioResponse.sendSmsExpectMoreResponse_1_6() |
| * |
| * Note this API is the same as the 1.0 |
| * |
| * Based on the return error, caller decides to resend if sending sms |
| * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) |
| * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500) |
| */ |
| oneway sendSmsExpectMore_1_6(int32_t serial, GsmSmsMessage message); |
| |
| /** |
| * Send a CDMA SMS message |
| * |
| * @param serial Serial number of request. |
| * @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal |
| * |
| * Response callback is IRadioResponse.sendCdmaSmsResponse_1_6() |
| * |
| * Note this API is the same as the 1.0 |
| * |
| */ |
| oneway sendCdmaSms_1_6(int32_t serial, CdmaSmsMessage sms); |
| |
| /** |
| * Send an SMS message. Identical to sendCdmaSms_1_6, |
| * except that more messages are expected to be sent soon. |
| * |
| * @param serial Serial number of request. |
| * @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal |
| * |
| * Response callback is IRadioResponse.sendCdmaSMSExpectMoreResponse_1_6() |
| * |
| * Note this API is the same as the 1.5 |
| * |
| */ |
| oneway sendCdmaSmsExpectMore_1_6(int32_t serial, CdmaSmsMessage sms); |
| |
| /** |
| * Set SIM card power state. |
| * Request is used to power off or power on the card. It should not generate |
| * a CardState.CARDSTATE_ABSENT indication, since the SIM is still physically |
| * inserted. |
| * |
| * @param serial Serial number of request |
| * @param powerUp POWER_DOWN if powering down the SIM card, |
| * POWER_UP if powering up the SIM card, |
| * POWER_UP_PASS_THROUGH if powering up the SIM card in |
| * pass through mode. |
| * |
| * When SIM card is in POWER_UP_PASS_THROUGH, the modem does not send |
| * any command to it (for example SELECT of MF, or TERMINAL |
| * CAPABILITY), and the SIM card is controlled completely by Telephony |
| * sending APDUs directly. The SIM card state must be |
| * RIL_CARDSTATE_PRESENT and the number of card apps will be 0. |
| * No new error code is generated. Emergency calls are supported in |
| * the same way as if the SIM card is absent. |
| * Pass-through mode is valid only for the specific card session where |
| * it is activated, and normal behavior occurs at the next SIM |
| * initialization, unless POWER_UP_PASS_THROUGH is requested again. |
| * |
| * The device is required to power down the SIM card before it can |
| * switch the mode between POWER_UP and POWER_UP_PASS_THROUGH. |
| * At device power up, the SIM interface is powered up automatically. |
| * Each subsequent request to this method is processed only after the |
| * completion of the previous one. |
| * |
| * When the SIM is in POWER_DOWN, the modem should send an empty vector of |
| * AppStatus in CardStatus.applications. If a SIM in the POWER_DOWN state |
| * is removed and a new SIM is inserted, the new SIM should be in POWER_UP |
| * mode by default. If the device is turned off or restarted while the SIM |
| * is in POWER_DOWN, then the SIM should turn on normally in POWER_UP mode |
| * when the device turns back on. |
| * |
| * Response callback is IRadioResponse.setSimCardPowerResponse_1_6(). |
| * Note that this differs from setSimCardPower_1_1 in that the response |
| * callback should only be sent once the device has finished executing |
| * the request (the SIM has finished powering on or off). |
| */ |
| oneway setSimCardPower_1_6(int32_t serial, CardPowerState powerUp); |
| |
| /** |
| * Enable or disable E-UTRA-NR dual connectivity. If disabled then UE will not connect |
| * to secondary carrier. |
| * |
| * @param serial Serial number of request. |
| * @param nrDualConnectivityState expected NR dual connectivity state. |
| * 1. Enable NR dual connectivity {NrDualConnectivityState:ENABLE} |
| * 2. Disable NR dual connectivity {NrDualConnectivityState:DISABLE} |
| * 3. Disable NR dual connectivity and force secondary cell to be released |
| * {NrDualConnectivityState:DISABLE_IMMEDIATE} |
| * |
| * Response callback is IRadioResponse.setNRDualConnectivityStateResponse() |
| */ |
| oneway setNrDualConnectivityState(int32_t serial, |
| NrDualConnectivityState nrDualConnectivityState); |
| |
| /** |
| * Is E-UTRA-NR Dual Connectivity enabled |
| * |
| * @param serial Serial number of request. |
| * Response callback is IRadioResponse.isNRDualConnectivityEnabledResponse() |
| */ |
| oneway isNrDualConnectivityEnabled(int32_t serial); |
| |
| /** |
| * Reserves an unallocated pdu session id from the pool of ids. |
| * |
| * The allocated id is returned in the response. |
| * |
| * When the id is no longer needed, call releasePduSessionId to |
| * return it to the pool. |
| * |
| * Reference: 3GPP TS 24.007 section 11.2.3.1b |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.allocatePduSessionIdResponse() |
| */ |
| oneway allocatePduSessionId(int32_t serial); |
| |
| /** |
| * Releases a pdu session id that was previously allocated using |
| * allocatePduSessionId. |
| * |
| * Reference: 3GPP TS 24.007 section 11.2.3.1b |
| * @param serial Serial number of request. |
| * @param id Pdu session id to release. |
| * |
| * Response function is IRadioResponse.releasePduSessionIdResponse() |
| */ |
| oneway releasePduSessionId(int32_t serial, int32_t id); |
| |
| /** |
| * Indicates that a handover to the IWLAN transport has begun. |
| * |
| * Any resources being transferred to the IWlan transport cannot be released while a |
| * handover is underway. For example, if a pdu session id needs to be |
| * transferred to IWlan, then, the modem should not release the id while |
| * the handover is in progress. |
| * |
| * If a handover was unsuccessful, then the framework calls IRadio::cancelHandover. |
| * The modem retains ownership over any of the resources being transferred to IWlan. |
| * |
| * If a handover was successful, the framework calls IRadio::deactivateDataCall with reason |
| * HANDOVER. The IWlan transport now owns the transferred resources and is responsible for |
| * releasing them. |
| * |
| * @param serial Serial number of request. |
| * @param id callId The identifier of the data call which is provided in SetupDataCallResult |
| * |
| * Response function is IRadioResponse.startHandoverResponse() |
| */ |
| oneway startHandover(int32_t serial, int32_t callId); |
| |
| /** |
| * Indicates that a handover was cancelled after a call to IRadio::startHandover. |
| * |
| * Since the handover was unsuccessful, the modem retains ownership over any of the resources |
| * being transferred and is still responsible for releasing them. |
| * |
| * @param serial Serial number of request. |
| * @param id callId The identifier of the data call which is provided in SetupDataCallResult |
| * |
| * Response function is IRadioResponse.cancelHandoverResponse() |
| */ |
| oneway cancelHandover(int32_t serial, int32_t callId); |
| |
| /** |
| * Requests to set the network type for searching and registering. |
| * |
| * Instruct the radio to *only* accept the types of network provided. |
| * setPreferredNetworkType, setPreferredNetworkTypesBitmap will not be called anymore |
| * except for IRadio v1.5 or older devices. |
| * |
| * In case of an emergency call, the modem is authorized to bypass this |
| * restriction. |
| * |
| * @param serial Serial number of request. |
| * @param networkTypeBitmap a 32-bit bearer bitmap of RadioAccessFamily |
| * |
| * Response callback is IRadioResponse.setAllowedNetworkTypesBitmapResponse() |
| */ |
| oneway setAllowedNetworkTypesBitmap( |
| uint32_t serial, bitfield<RadioAccessFamily> networkTypeBitmap); |
| |
| /** |
| * Requests bitmap representing the currently allowed network types. |
| * |
| * getPreferredNetworkType, getPreferredNetworkTypesBitmap will not be called anymore |
| * except for IRadio v1.5 or older devices. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getAllowedNetworkTypesBitmapResponse() |
| */ |
| oneway getAllowedNetworkTypesBitmap(int32_t serial); |
| |
| /** |
| * Control data throttling at modem. |
| * - DataThrottlingAction:NO_DATA_THROTTLING should clear any existing |
| * data throttling within the requested completion window. |
| * - DataThrottlingAction:THROTTLE_SECONDARY_CARRIER: Remove any existing |
| * throttling on anchor carrier and achieve maximum data throttling on |
| * secondary carrier within the requested completion window. |
| * - DataThrottlingAction:THROTTLE_ANCHOR_CARRIER: disable secondary |
| * carrier and achieve maximum data throttling on anchor carrier by |
| * requested completion window. |
| * - DataThrottlingAction:HOLD: Immediately hold on to current level of |
| * throttling. |
| * |
| * @param serial Serial number of request. |
| * @param dataThrottlingAction DataThrottlingAction as defined in types.hal |
| * @param completionDurationMillis window, in milliseconds, in which the |
| * requested throttling action has to be achieved. This must be 0 when |
| * dataThrottlingAction is DataThrottlingAction:HOLD. |
| * |
| * Response function is IRadioResponse.setDataThrottlingResponse() |
| */ |
| oneway setDataThrottling(int32_t serial, |
| DataThrottlingAction dataThrottlingAction, |
| int64_t completionDurationMillis); |
| |
| /** |
| * Initiate emergency voice call, with zero or more emergency service category(s), zero or |
| * more emergency Uniform Resource Names (URN), and routing information for handling the call. |
| * Android uses this request to make its emergency call instead of using @1.0::IRadio.dial |
| * if the 'address' in the 'dialInfo' field is identified as an emergency number by Android. |
| * |
| * In multi-sim scenario, if the emergency number is from a specific subscription, this radio |
| * request can still be sent out on the other subscription as long as routing is set to |
| * @1.4::EmergencyNumberRouting#EMERGENCY. This radio request will not be sent on an inactive |
| * (PIN/PUK locked) subscription unless both subscriptions are PIN/PUK locked. In this case, |
| * the request will be sent on the primary subscription. |
| * |
| * Some countries or carriers require some emergency numbers that must be handled with normal |
| * call routing if possible or emergency routing. 1) if the 'routing' field is specified as |
| * @1.4::EmergencyNumberRouting#NORMAL, the implementation must try the full radio service to |
| * use normal call routing to handle the call; if service cannot support normal routing, the |
| * implementation must use emergency routing to handle the call. 2) if 'routing' is specified |
| * as @1.4::EmergencyNumberRouting#EMERGENCY, the implementation must use emergency routing to |
| * handle the call. 3) if 'routing' is specified as @1.4::EmergencyNumberRouting#UNKNOWN, |
| * Android does not know how to handle the call. |
| * |
| * If the dialed emergency number does not have a specified emergency service category, the |
| * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED; if the dialed |
| * emergency number does not have specified emergency Uniform Resource Names, the 'urns' field |
| * is set to an empty list. If the underlying technology used to request emergency services |
| * does not support the emergency service category or emergency uniform resource names, the |
| * field 'categories' or 'urns' may be ignored. |
| * |
| * In the scenarios that the 'address' in the 'dialInfo' field has other functions besides the |
| * emergency number function, if the 'hasKnownUserIntentEmergency' field is true, the user's |
| * intent for this dial request is emergency call, and the modem must treat this as an actual |
| * emergency dial; if the 'hasKnownUserIntentEmergency' field is false, Android does not know |
| * user's intent for this call. |
| * |
| * If 'isTesting' is true, this request is for testing purpose, and must not be sent to a real |
| * emergency service; otherwise it's for a real emergency call request. |
| * |
| * Reference: 3gpp 22.101, Section 10 - Emergency Calls; |
| * 3gpp 23.167, Section 6 - Functional description; |
| * 3gpp 24.503, Section 5.1.6.8.1 - General; |
| * RFC 5031 |
| * |
| * @param serial Serial number of request. |
| * @param dialInfo the same @1.0::Dial information used by @1.0::IRadio.dial. |
| * @param categories bitfield<@1.4::EmergencyServiceCategory> the Emergency Service Category(s) |
| * of the call. |
| * @param urns the emergency Uniform Resource Names (URN) |
| * @param routing @1.4::EmergencyCallRouting the emergency call routing information. |
| * @param hasKnownUserIntentEmergency Flag indicating if user's intent for the emergency call |
| * is known. |
| * @param isTesting Flag indicating if this request is for testing purpose. |
| * |
| * Response function is IRadioResponse.emergencyDialResponse() |
| */ |
| oneway emergencyDial_1_6(int32_t serial, Dial dialInfo, |
| bitfield<EmergencyServiceCategory> categories, vec<string> urns, |
| EmergencyCallRouting routing, bool hasKnownUserIntentEmergency, bool isTesting); |
| |
| /** |
| * Get which bands the modem's background scan is acting on. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getSystemSelectionChannelsResponse() |
| */ |
| oneway getSystemSelectionChannels(int32_t serial); |
| |
| /** |
| * Request all of the current cell information known to the radio. The radio |
| * must return list of all current cells, including the neighboring cells. If for a particular |
| * cell information isn't known then the appropriate unknown value will be returned. |
| * This does not cause or change the rate of unsolicited cellInfoList(). |
| * |
| * This is identical to getCellInfoList in V1.0, but it requests updated version of CellInfo. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCellInfoListResponse() |
| */ |
| oneway getCellInfoList_1_6(int32_t serial); |
| |
| /** |
| * Request current voice registration state. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getVoiceRegistrationStateResponse_1_6() |
| */ |
| oneway getVoiceRegistrationState_1_6(int32_t serial); |
| |
| /** |
| * Requests current signal strength and associated information. Must succeed if radio is on. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getSignalStrengthResponse_1_6() |
| */ |
| oneway getSignalStrength_1_6(int32_t serial); |
| |
| /** |
| * Request current data registration state. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getDataRegistrationStateResponse_1_6() |
| */ |
| oneway getDataRegistrationState_1_6(int32_t serial); |
| |
| /** |
| * Requests current call list |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getCurrentCallsResponse_1_6() |
| */ |
| oneway getCurrentCalls_1_6(int32_t serial); |
| |
| /** |
| * Request to get the current slicing configuration including URSP rules and |
| * NSSAIs (configured, allowed and rejected). |
| * URSP stands for UE route selection policy and is defined in 3GPP TS 24.526 |
| * Section 4.2. |
| * An NSSAI is a collection of network slices. Each network slice is identified by |
| * an S-NSSAI and is represented by the struct SliceInfo. NSSAI and S-NSSAI |
| * are defined in 3GPP TS 24.501. |
| * |
| * Response function is IRadioResponse.getSlicingConfigResponse() |
| */ |
| oneway getSlicingConfig(int32_t serial); |
| |
| /** |
| * Provide Carrier specific information to the modem that must be used to |
| * encrypt the IMSI and IMPI. Sent by the framework during boot, carrier |
| * switch and everytime the framework receives a new certificate. |
| * |
| * @param serial Serial number of request. |
| * @param imsiEncryptionInfo ImsiEncryptionInfo as defined in types.hal. |
| * |
| * Response callback is |
| * IRadioResponse.setCarrierInfoForImsiEncryptionResponse() |
| * |
| * Note this API is the same as the 1.1 version except using the 1.6 ImsiEncryptionInfo |
| * as the input param. |
| */ |
| oneway setCarrierInfoForImsiEncryption_1_6(int32_t serial, @1.6::ImsiEncryptionInfo imsiEncryptionInfo); |
| |
| /** |
| * Get the local and global phonebook records from the SIM card. |
| * This should be called again after a simPhonebookChanged notification is received. |
| * |
| * The phonebook records are received via IRadioIndication.simPhonebookRecordsReceived() |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getSimPhonebookRecordsResponse() |
| */ |
| oneway getSimPhonebookRecords(int32_t serial); |
| |
| /** |
| * Get the phone book capacity |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is defined from IRadioResponse.getSimPhonebookCapacityResponse() |
| */ |
| oneway getSimPhonebookCapacity(int32_t serial); |
| |
| /** |
| * Insert, delete or update a phonebook record on the SIM card. |
| * If the index of recordInfo is 0, the phonebook record will be added to global or |
| * local phonebook, and global phonebook has higher priority than local phonebook. |
| * |
| * If the fields in the recordInfo are all empty except for the index, the phonebook |
| * record specified by the index will be deleted. |
| * |
| * The indication simPhonebookChanged will be called after every successful call of |
| * updateSimPhonebookRecords. |
| * |
| * @param serial Serial number of request. |
| * @param recordInfo Details of the record to insert, delete or update. |
| * |
| * Response callback is IRadioResponse.updateSimPhonebookRecordsResponse() |
| */ |
| oneway updateSimPhonebookRecords(int32_t serial, PhonebookRecordInfo recordInfo); |
| }; |