| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.radio@1.0; |
| |
| import IRadioResponse; |
| import IRadioIndication; |
| |
| /** |
| * This interface is used by telephony & telecom to talk to cellular radio. |
| * All the functions have minimum one parameter: |
| * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the |
| * duration of a method call. If clients provide colliding serials (including passing the same |
| * serial to different methods), multiple responses (one for each method call) must still be served. |
| */ |
| interface IRadio { |
| /** |
| * Set response functions for radio requests & radio indications. |
| * |
| * @param radioResponse Object containing response functions |
| * @param radioIndication Object containing radio indications |
| */ |
| setResponseFunctions(IRadioResponse radioResponse, |
| IRadioIndication radioIndication); |
| |
| /** |
| * Requests status of the ICC card |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getIccCardStatusResponse() |
| * |
| */ |
| oneway getIccCardStatus(int32_t serial); |
| |
| /** |
| * Supplies ICC PIN. Only called if CardStatus has AppState.PIN state |
| * |
| * @param serial Serial number of request. |
| * @param pin PIN value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.supplyIccPinForAppResponse() |
| * |
| */ |
| oneway supplyIccPinForApp(int32_t serial, string pin, string aid); |
| |
| /** |
| * Supplies ICC PUK and new PIN. |
| * |
| * @param serial Serial number of request. |
| * @param puk PUK value |
| * @param pin New PIN value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.supplyIccPukForAppResponse() |
| * |
| */ |
| oneway supplyIccPukForApp(int32_t serial, string puk, string pin, string aid); |
| |
| /** |
| * Supplies ICC PIN2. Only called following operation where SIM_PIN2 was |
| * returned as a a failure from a previous operation. |
| * |
| * @param serial Serial number of request. |
| * @param pin2 PIN2 value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.supplyIccPin2ForAppResponse() |
| * |
| */ |
| oneway supplyIccPin2ForApp(int32_t serial, string pin2, string aid); |
| |
| /** |
| * Supplies ICC PUK2 and new PIN2. |
| * |
| * @param serial Serial number of request. |
| * @param puk2 PUK2 value |
| * @param pin2 New PIN2 value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.supplyIccPuk2ForAppResponse() |
| * |
| */ |
| oneway supplyIccPuk2ForApp(int32_t serial, string puk2, string pin2, |
| string aid); |
| |
| /** |
| * Supplies old ICC PIN and new PIN. |
| * |
| * @param serial Serial number of request. |
| * @param oldPin Old pin value |
| * @param newPin New pin value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.changeIccPinForAppResponse() |
| * |
| */ |
| oneway changeIccPinForApp(int32_t serial, string oldPin, string newPin, |
| string aid); |
| |
| /** |
| * Supplies old ICC PIN2 and new PIN2. |
| * |
| * @param serial Serial number of request. |
| * @param oldPin2 Old pin2 value |
| * @param newPin2 New pin2 value |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.changeIccPin2ForAppResponse() |
| * |
| */ |
| oneway changeIccPin2ForApp(int32_t serial, string oldPin2, string newPin2, |
| string aid); |
| |
| /** |
| * Requests that network personalization be deactivated |
| * |
| * @param serial Serial number of request. |
| * @param netPin Network depersonlization code |
| * |
| * Response function is IRadioResponse.supplyNetworkDepersonalizationResponse() |
| * |
| */ |
| oneway supplyNetworkDepersonalization(int32_t serial, string netPin); |
| |
| /** |
| * Requests current call list |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getCurrentCallsResponse() |
| * |
| */ |
| oneway getCurrentCalls(int32_t serial); |
| |
| /** |
| * Initiate voice call. |
| * This method is never used for supplementary service codes |
| * |
| * @param serial Serial number of request. |
| * @param dialInfo Dial struct |
| * |
| * Response function is IRadioResponse.dialResponse() |
| * |
| */ |
| oneway dial(int32_t serial, Dial dialInfo); |
| |
| /** |
| * Get the SIM IMSI |
| * Only valid when radio state is "RADIO_STATE_ON" |
| * |
| * @param serial Serial number of request. |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * |
| * Response function is IRadioResponse.getImsiForAppResponse() |
| * |
| */ |
| oneway getImsiForApp(int32_t serial, string aid); |
| |
| /** |
| * Hang up a specific line (like AT+CHLD=1x) |
| * After this HANGUP request returns, Radio must show the connection is NOT |
| * active anymore in next requestGetCurrentCalls query. |
| * |
| * @param serial Serial number of request. |
| * @param gsmIndex Connection index (value of 'x' in CHLD above) |
| * |
| * Response function is IRadioResponse.hangupResponse() |
| * |
| */ |
| oneway hangup(int32_t serial, int32_t gsmIndex); |
| |
| /** |
| * Hang up waiting or held (like AT+CHLD=0) |
| * After this HANGUP request returns, Radio must show the connection is NOT |
| * active anymore in next getCurrentCalls() query. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.hangupWaitingOrBackgroundResponse() |
| * |
| */ |
| oneway hangupWaitingOrBackground(int32_t serial); |
| |
| /** |
| * Hang up waiting or held (like AT+CHLD=1) |
| * After this HANGUP request returns, Radio must show the connection is NOT |
| * active anymore in next getCurrentCalls query. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.hangupForegroundResumeBackgroundResponse() |
| * |
| */ |
| oneway hangupForegroundResumeBackground(int32_t serial); |
| |
| /** |
| * Switch waiting or holding call and active call (like AT+CHLD=2) |
| * State transitions must be as follows: |
| * |
| * Call transitions must happen as shown below. |
| * |
| * BEFORE AFTER |
| * Call 1 Call 2 Call 1 Call 2 |
| * ACTIVE HOLDING HOLDING ACTIVE |
| * ACTIVE WAITING HOLDING ACTIVE |
| * HOLDING WAITING HOLDING ACTIVE |
| * ACTIVE IDLE HOLDING IDLE |
| * IDLE IDLE IDLE IDLE |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.switchWaitingOrHoldingAndActiveResponse() |
| * |
| */ |
| oneway switchWaitingOrHoldingAndActive(int32_t serial); |
| |
| /** |
| * Conference holding and active (like AT+CHLD=3) |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.conferenceResponse() |
| * |
| */ |
| oneway conference(int32_t serial); |
| |
| /** |
| * Send UDUB (user determined user busy) to ringing or |
| * waiting call answer) |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.rejectCallResponse() |
| * |
| */ |
| oneway rejectCall(int32_t serial); |
| |
| /** |
| * Requests the failure cause code for the most recently terminated call. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getLastCallFailCauseResponse() |
| * |
| */ |
| oneway getLastCallFailCause(int32_t serial); |
| |
| /** |
| * Requests current signal strength and associated information. |
| * Must succeed if radio is on. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getSignalStrengthResponse() |
| */ |
| oneway getSignalStrength(int32_t serial); |
| |
| /** |
| * Request current voice registration state |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getVoiceRegistrationStateResponse() |
| */ |
| oneway getVoiceRegistrationState(int32_t serial); |
| |
| /** |
| * Request current data registration state |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getDataRegistrationStateResponse() |
| */ |
| oneway getDataRegistrationState(int32_t serial); |
| |
| /** |
| * Request current operator ONS or EONS |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getOperatorResponse() |
| */ |
| oneway getOperator(int32_t serial); |
| |
| /** |
| * Toggle radio on and off (for "airplane" mode) |
| * If the radio is turned off/on the radio modem subsystem |
| * is expected return to an initialized state. For instance, |
| * any voice and data calls must be terminated and all associated |
| * lists emptied. |
| * |
| * @param serial Serial number of request. |
| * @param on To turn on radio -> on = true, to turn off radio -> on = false. |
| * |
| * Response function is IRadioResponse.setRadioPowerResponse() |
| */ |
| oneway setRadioPower(int32_t serial, bool on); |
| |
| /** |
| * Send a DTMF tone |
| * |
| * If the implementation is currently playing a tone requested via |
| * startDtmf(), that tone must be cancelled and the new tone |
| * must be played instead |
| * |
| * @param serial Serial number of request. |
| * @param s string with single char having one of 12 values: 0-9, *, # |
| * |
| * Response function is IRadioResponse.sendDtmfResponse() |
| */ |
| oneway sendDtmf(int32_t serial, string s); |
| |
| /** |
| * Send an SMS message |
| * |
| * @param serial Serial number of request. |
| * @param message GsmSmsMessage as defined in types.hal |
| * |
| * Response function is IRadioResponse.sendSmsResponse() |
| * |
| * Based on the return error, caller decides to resend if sending sms |
| * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) |
| * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500) |
| */ |
| oneway sendSms(int32_t serial, GsmSmsMessage message); |
| |
| /** |
| * Send an SMS message. Identical to sendSms, |
| * except that more messages are expected to be sent soon. If possible, |
| * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command) |
| * |
| * @param serial Serial number of request. |
| * @param message GsmSmsMessage as defined in types.hal |
| * |
| * Response function is IRadioResponse.sendSMSExpectMoreResponse() |
| * |
| * Based on the return error, caller decides to resend if sending sms |
| * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) |
| * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500) |
| */ |
| oneway sendSMSExpectMore(int32_t serial, GsmSmsMessage message); |
| |
| /** |
| * Setup a packet data connection. If DataCallResponse.status |
| * return DataCallFailCause:NONE it is added to the list of data calls and a |
| * unsolDataCallListChanged() is sent. The call remains in the |
| * list until deactivateDataCall() is issued or the |
| * radio is powered off/on. This list is returned by getDataCallList() |
| * and dataCallListChanged(). |
| * |
| * The Radio is expected to: |
| * - Create one data call context. |
| * - Create and configure a dedicated interface for the context |
| * - The interface must be point to point. |
| * - The interface is configured with one or more addresses and |
| * is capable of sending and receiving packets. The prefix length |
| * of the addresses must be /32 for IPv4 and /128 for IPv6. |
| * - Must NOT change the linux routing table. |
| * - Support up to getDataRegistrationState response[5] |
| * number of simultaneous data call contexts. |
| * |
| * @param serial Serial number of request. |
| * @param radioTechnology Radio technology to use. |
| * @param dataProfileInfo data profile info. |
| * @param modemCognitive Indicating this profile was sent to the modem through setDataProfile |
| * earlier. |
| * @param roamingAllowed Indicating data roaming is allowed or not by the user. |
| * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old |
| * RIL API must be filled accordingly based on the roaming condition. |
| * Note this is for backward compatibility with the old radio modem. The modem |
| * must not use this param for any other reason. |
| * |
| * Response function is IRadioResponse.setupDataCallResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher, use @1.2::IRadio.setupDataCall_1_2() instead. |
| */ |
| oneway setupDataCall(int32_t serial, RadioTechnology radioTechnology, |
| DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed, |
| bool isRoaming); |
| |
| /** |
| * Request ICC I/O operation. |
| * This is similar to the TS 27.007 "restricted SIM" operation |
| * where it assumes all of the EF selection must be done by the |
| * callee |
| * |
| * Arguments and responses that are unused for certain |
| * values of "command" must be ignored or set to empty string |
| * |
| * @param serial Serial number of request. |
| * @param iccIo IccIo |
| * |
| * Please note that IccIo has a "PIN2" field which may be empty string, |
| * or may specify a PIN2 for operations that require a PIN2 (eg |
| * updating FDN records) |
| * |
| * Response function is IRadioResponse.iccIOForAppResponse() |
| */ |
| oneway iccIOForApp(int32_t serial, IccIo iccIo); |
| |
| /** |
| * Send a USSD message. |
| * |
| * If a USSD session already exists, the message must be sent in the |
| * context of that session. Otherwise, a new session must be created. |
| * |
| * The network reply must be reported via unsolOnUssd |
| * |
| * Only one USSD session must exist at a time, and the session is assumed |
| * to exist until: |
| * a) The android system invokes cancelUssd() |
| * b) The implementation sends a unsolOnUssd() with a type code |
| * of "0" (USSD-Notify/no further action) or "2" (session terminated) |
| * |
| * @param serial Serial number of request. |
| * @param ussd string containing the USSD request in UTF-8 format |
| * |
| * Response function is IRadioResponse.sendUssdResponse() |
| * |
| * See also requestCancelUssd, unsolOnUssd |
| */ |
| oneway sendUssd(int32_t serial, string ussd); |
| |
| /** |
| * Cancel the current USSD session if one exists. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.cancelPendingUssdResponse() |
| */ |
| oneway cancelPendingUssd(int32_t serial); |
| |
| /** |
| * Gets current CLIR status |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getClirResponse() |
| */ |
| oneway getClir(int32_t serial); |
| |
| /** |
| * Set current CLIR status |
| * |
| * @param serial Serial number of request. |
| * @param status "n" parameter from TS 27.007 7.7 |
| * |
| * Response function is IRadioResponse.setClirResponse() |
| */ |
| oneway setClir(int32_t serial, int32_t status); |
| |
| /** |
| * Request call forward status. |
| * |
| * @param serial Serial number of request. |
| * @param callInfo CallForwardInfo |
| * |
| * Response function is IRadioResponse.getCallForwardStatusResponse() |
| */ |
| oneway getCallForwardStatus(int32_t serial, |
| CallForwardInfo callInfo); |
| |
| /** |
| * Configure call forward rule |
| * |
| * @param serial Serial number of request. |
| * @param callInfo CallForwardInfo |
| * |
| * Response function is IRadioResponse.setCallForwardResponse() |
| */ |
| oneway setCallForward(int32_t serial, CallForwardInfo callInfo); |
| |
| /** |
| * Query current call waiting state |
| * |
| * @param serial Serial number of request. |
| * @param serviceClass Service class is the TS 27.007 service class to query |
| * |
| * Response function is IRadioResponse.getCallWaitingResponse() |
| */ |
| oneway getCallWaiting(int32_t serial, int32_t serviceClass); |
| |
| /** |
| * Configure current call waiting state |
| * |
| * @param serial Serial number of request. |
| * @param enable is false for "disabled" and true for "enabled" |
| * @param serviceClass is the TS 27.007 service class bit vector of services to modify |
| * |
| * Response function is IRadioResponse.setCallWaitingResponse() |
| */ |
| oneway setCallWaiting(int32_t serial, bool enable, |
| int32_t serviceClass); |
| |
| /** |
| * Acknowledge successful or failed receipt of SMS previously indicated |
| * via unsolResponseNewSms |
| * |
| * @param serial Serial number of request. |
| * @param success is true on successful receipt |
| * (basically, AT+CNMA=1 from TS 27.005 is 0 on failed receipt |
| * (basically, AT+CNMA=2 from TS 27.005) |
| * @param cause: if success is false, this contains the failure cause as defined |
| * in TS 23.040, 9.2.3.22. |
| * |
| * Response function is IRadioResponse.acknowledgeLastIncomingGsmSmsResponse() |
| */ |
| oneway acknowledgeLastIncomingGsmSms(int32_t serial, bool success, |
| SmsAcknowledgeFailCause cause); |
| |
| /** |
| * Answer incoming call |
| * Must not be called for WAITING calls. |
| * switchWaitingOrHoldingAndActive() must be used in this case |
| * instead |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.acceptCallResponse() |
| */ |
| oneway acceptCall(int32_t serial); |
| |
| /** |
| * Deactivate packet data connection and remove from the |
| * data call list if RadioError:NONE is returned. Any other return |
| * values must also try to remove the call from the list. An |
| * unsolDataCallListChanged must be |
| * issued because of an deactivateDataCall. |
| * |
| * @param serial Serial number of request. |
| * @param cid Indicates CID |
| * @param reasonRadioShutDown Indicates Disconnect Reason |
| * false => No specific reason specified |
| * true => Radio shutdown requested |
| * |
| * Response function is IRadioResponse.deactivateDataCallResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher, use @1.2::IRadio.deactivateDataCall_1_2() instead. |
| */ |
| oneway deactivateDataCall(int32_t serial, int32_t cid, |
| bool reasonRadioShutDown); |
| |
| /** |
| * Query the status of a facility lock state |
| * |
| * @param serial Serial number of request. |
| * @param facility is the facility string code from TS 27.007 7.4 |
| * (eg "AO" for BAOC, "SC" for SIM lock) |
| * @param password is the password, or "" if not required |
| * @param serviceClass is the TS 27.007 service class bit vector of services to query |
| * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * This is only applicable in the case of Fixed Dialing Numbers (FDN) requests. |
| * |
| * Response function is IRadioResponse.getFacilityLockForAppResponse() |
| */ |
| oneway getFacilityLockForApp(int32_t serial, string facility, |
| string password, int32_t serviceClass, string appId); |
| |
| /** |
| * Enable/disable one facility lock |
| * |
| * @param serial Serial number of request. |
| * @param facility is the facility string code from TS 27.007 7.4 (eg "AO" for BAOC) |
| * @param lockState false for "unlock" and true for "lock" |
| * @param password is the password |
| * @param serviceClass is string representation of decimal TS 27.007 |
| * service class bit vector. Eg, the string |
| * "1" means "set this facility for voice services" |
| * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value. |
| * This is only applicable in the case of Fixed Dialing Numbers (FDN) requests. |
| * |
| * Response function is IRadioResponse.setFacilityLockForAppResponse() |
| */ |
| oneway setFacilityLockForApp(int32_t serial, string facility, bool lockState, |
| string password, int32_t serviceClass, string appId); |
| |
| /** |
| * Change call barring facility password |
| * |
| * @param serial Serial number of request. |
| * @param facility facility string code from TS 27.007 7.4 (eg "AO" for BAOC) |
| * @param oldPassword old password |
| * @param newPassword new password |
| * |
| * Response function is IRadioResponse.setBarringPasswordResponse() |
| */ |
| oneway setBarringPassword(int32_t serial, string facility, |
| string oldPassword, string newPassword); |
| |
| /** |
| * Query current network selection mode |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getNetworkSelectionModeResponse() |
| */ |
| oneway getNetworkSelectionMode(int32_t serial); |
| |
| /** |
| * Specify that the network must be selected automatically. |
| * This request must not respond until the new operator is selected and registered. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.setNetworkSelectionModeAutomaticResponse() |
| */ |
| oneway setNetworkSelectionModeAutomatic(int32_t serial); |
| |
| /** |
| * Manually select a specified network. |
| * This request must not respond until the new operator is selected and registered. |
| * |
| * @param serial Serial number of request. |
| * @param operatorNumeric string specifying MCCMNC of network to select (eg "310170") |
| * |
| * Response function is IRadioResponse.setNetworkSelectionModeManualResponse() |
| */ |
| oneway setNetworkSelectionModeManual(int32_t serial, string operatorNumeric); |
| |
| /** |
| * Scans for available networks |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getAvailableNetworksResponse() |
| */ |
| oneway getAvailableNetworks(int32_t serial); |
| |
| /** |
| * Start playing a DTMF tone. Continue playing DTMF tone until |
| * stopDtmf is received. |
| * If a startDtmf() is received while a tone is currently playing, |
| * it must cancel the previous tone and play the new one. |
| * |
| * @param serial Serial number of request. |
| * @param s string having a single character with one of 12 values: 0-9,*,# |
| * |
| * Response function is IRadioResponse.startDtmfResponse() |
| */ |
| oneway startDtmf(int32_t serial, string s); |
| |
| /** |
| * Stop playing a currently playing DTMF tone. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.stopDtmfResponse() |
| */ |
| oneway stopDtmf(int32_t serial); |
| |
| /** |
| * Return string value indicating baseband version, eg response from AT+CGMR |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getBasebandVersionResponse() |
| */ |
| oneway getBasebandVersion(int32_t serial); |
| |
| /** |
| * Separate a party from a multiparty call placing the multiparty call |
| * (less the specified party) on hold and leaving the specified party |
| * as the only other member of the current (active) call |
| * |
| * Like AT+CHLD=2x |
| * |
| * See TS 22.084 1.3.8.2 (iii) |
| * TS 22.030 6.5.5 "Entering "2X followed by send" |
| * TS 27.007 "AT+CHLD=2x" |
| * |
| * @param serial Serial number of request. |
| * @param gsmIndex contains Connection index (value of 'x' in CHLD above) |
| * |
| * Response function is IRadioResponse.separateConnectionResponse() |
| */ |
| oneway separateConnection(int32_t serial, int32_t gsmIndex); |
| |
| /** |
| * Turn on or off uplink (microphone) mute. |
| * Must only be sent while voice call is active. |
| * Must always be reset to "disable mute" when a new voice call is initiated |
| * |
| * @param serial Serial number of request. |
| * @param enable true for "enable mute" and false for "disable mute" |
| * |
| * Response function is IRadioResponse.setMuteResponse() |
| */ |
| oneway setMute(int32_t serial, bool enable); |
| |
| /** |
| * Queries the current state of the uplink mute setting |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getMuteResponse() |
| */ |
| oneway getMute(int32_t serial); |
| |
| /** |
| * Queries the status of the CLIP supplementary service |
| * (for MMI code "*#30#") |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getClipResponse() |
| */ |
| oneway getClip(int32_t serial); |
| |
| /** |
| * Returns the data call list. An entry is added when a |
| * setupDataCall() is issued and removed on a |
| * deactivateDataCall(). The list is emptied when |
| * setRadioPower() off/on is issued. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getDataCallListResponse() |
| */ |
| oneway getDataCallList(int32_t serial); |
| |
| /** |
| * Enables/disables supplementary service related notifications from the network. |
| * Notifications are reported via unsolSuppSvcNotification(). |
| * |
| * @param serial Serial number of request. |
| * @param enable true = notifications enabled, false = notifications disabled. |
| * |
| * Response function is IRadioResponse.setSuppServiceNotificationsResponse() |
| */ |
| oneway setSuppServiceNotifications(int32_t serial, bool enable); |
| |
| /** |
| * Stores a SMS message to SIM memory. |
| * |
| * @param serial Serial number of request. |
| * @param smsWriteArgs SmsWriteArgs defined in types.hal |
| * |
| * Response function is IRadioResponse.writeSmsToSimResponse() |
| */ |
| oneway writeSmsToSim(int32_t serial, SmsWriteArgs smsWriteArgs); |
| |
| /** |
| * Deletes a SMS message from SIM memory. |
| * |
| * @param serial Serial number of request. |
| * @param index Record index of the message to delete. |
| * |
| * Response function is IRadioResponse.deleteSmsOnSimResponse() |
| */ |
| oneway deleteSmsOnSim(int32_t serial, int32_t index); |
| |
| /** |
| * Assign a specified band for RF configuration. |
| * |
| * @param serial Serial number of request. |
| * @param mode RadioBandMode defined in types.hal |
| * |
| * Response function is IRadioResponse.setBandModeResponse() |
| */ |
| oneway setBandMode(int32_t serial, RadioBandMode mode); |
| |
| /** |
| * Get the list of band modes supported by RF. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response function is IRadioResponse.getAvailableBandModesResponse() |
| */ |
| oneway getAvailableBandModes(int32_t serial); |
| |
| /** |
| * Requests to send a SAT/USAT envelope command to SIM. |
| * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111 |
| * |
| * @param serial Serial number of request. |
| * @param command SAT/USAT command in hexadecimal format string starting with command tag |
| * |
| * Response function is IRadioResponse.sendEnvelopeResponse() |
| */ |
| oneway sendEnvelope(int32_t serial, string command); |
| |
| /** |
| * Requests to send a terminal response to SIM for a received proactive command |
| * |
| * @param serial Serial number of request. |
| * @param commandResponse SAT/USAT response in hexadecimal format string starting with |
| * first byte of response data |
| * |
| * Response function is IRadioResponse.sendTerminalResponseResponseToSim() |
| */ |
| oneway sendTerminalResponseToSim(int32_t serial, string commandResponse); |
| |
| /** |
| * When STK application gets stkCallSetup(), the call actually has |
| * been initialized by mobile device already. (We could see the call has been in the 'call |
| * list') So, STK application needs to accept/reject the call according to user |
| * operations. |
| * |
| * @param serial Serial number of request. |
| * @param accept true = accept the call setup, false = reject the call setup |
| * |
| * Response callback is IRadioResponse.handleStkCallSetupRequestFromSimResponse() |
| */ |
| oneway handleStkCallSetupRequestFromSim(int32_t serial, |
| bool accept); |
| |
| /** |
| * Connects the two calls and disconnects the subscriber from both calls. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.explicitCallTransferResponse() |
| */ |
| oneway explicitCallTransfer(int32_t serial); |
| |
| /** |
| * Requests to set the preferred network type for searching and registering |
| * (CS/PS domain, RAT, and operation mode) |
| * |
| * @param serial Serial number of request. |
| * @param nwType PreferredNetworkType defined in types.hal |
| * |
| * Response callback is IRadioResponse.setPreferredNetworkTypeResponse() |
| */ |
| oneway setPreferredNetworkType(int32_t serial, |
| PreferredNetworkType nwType); |
| |
| /** |
| * Query the preferred network type (CS/PS domain, RAT, and operation mode) |
| * for searching and registering |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getPreferredNetworkTypeResponse() |
| */ |
| oneway getPreferredNetworkType(int32_t serial); |
| |
| /** |
| * Request neighboring cell id in GSM network |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getNeighboringCidsResponse() |
| */ |
| oneway getNeighboringCids(int32_t serial); |
| |
| /** |
| * Enables/disables network state change notifications due to changes in |
| * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA). |
| * Basically +CREG=2 vs. +CREG=1 (TS 27.007). |
| * Note: The Radio implementation must default to "updates enabled" |
| * when the screen is on and "updates disabled" when the screen is off. |
| * |
| * @param serial Serial number of request. |
| * @param enable true = updates enabled (+CREG=2), false = updates disabled (+CREG=1) |
| * |
| * Response callback is IRadioResponse.setLocationUpdatesResponse() |
| */ |
| oneway setLocationUpdates(int32_t serial, bool enable); |
| |
| /** |
| * Request to set the location where the CDMA subscription shall |
| * be retrieved |
| * |
| * @param serial Serial number of request. |
| * @param cdmaSub CdmaSubscriptionSource |
| * |
| * Response callback is IRadioResponse.setCdmaSubscriptionSourceResponse() |
| */ |
| oneway setCdmaSubscriptionSource(int32_t serial, |
| CdmaSubscriptionSource cdmaSub); |
| |
| /** |
| * Request to set the roaming preferences in CDMA |
| * |
| * @param serial Serial number of request. |
| * @param type CdmaRoamingType defined in types.hal |
| * |
| * Response callback is IRadioResponse.setCdmaRoamingPreferenceResponse() |
| */ |
| oneway setCdmaRoamingPreference(int32_t serial, |
| CdmaRoamingType type); |
| |
| /** |
| * Request the actual setting of the roaming preferences in CDMA in the modem |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCdmaRoamingPreferenceResponse() |
| */ |
| oneway getCdmaRoamingPreference(int32_t serial); |
| |
| /** |
| * Request to set the TTY mode |
| * |
| * @param serial Serial number of request. |
| * @param mode TtyMode |
| * |
| * Response callback is IRadioResponse.setTTYModeResponse() |
| */ |
| oneway setTTYMode(int32_t serial, TtyMode mode); |
| |
| /** |
| * Request the setting of TTY mode |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getTTYModeResponse() |
| */ |
| oneway getTTYMode(int32_t serial); |
| |
| /** |
| * Request to set the preferred voice privacy mode used in voice scrambling. |
| * |
| * @param serial Serial number of request. |
| * @param enable false for Standard Privacy Mode (Public Long Code Mask) |
| * true for Enhanced Privacy Mode (Private Long Code Mask) |
| * |
| * Response callback is IRadioResponse.setPreferredVoicePrivacyResponse() |
| */ |
| oneway setPreferredVoicePrivacy(int32_t serial, bool enable); |
| |
| /** |
| * Request the setting of preferred voice privacy mode. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getPreferredVoicePrivacyResponse() |
| */ |
| oneway getPreferredVoicePrivacy(int32_t serial); |
| |
| /** |
| * Send FLASH command |
| * |
| * @param serial Serial number of request. |
| * @param featureCode String associated with Flash command |
| * |
| * Response callback is IRadioResponse.sendCDMAFeatureCodeResponse() |
| */ |
| oneway sendCDMAFeatureCode(int32_t serial, string featureCode); |
| |
| /** |
| * Send DTMF string |
| * |
| * @param serial Serial number of request. |
| * @param dtmf DTMF string |
| * @param on DTMF ON length in milliseconds, or 0 to use default |
| * @param off is the DTMF OFF length in milliseconds, or 0 to use default |
| * |
| * Response callback is IRadioResponse.sendBurstDtmfResponse() |
| */ |
| oneway sendBurstDtmf(int32_t serial, string dtmf, int32_t on, int32_t off); |
| |
| /** |
| * Send a CDMA SMS message |
| * |
| * @param serial Serial number of request. |
| * @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal |
| * |
| * Response callback is IRadioResponse.sendCdmaSmsResponse() |
| */ |
| oneway sendCdmaSms(int32_t serial, CdmaSmsMessage sms); |
| |
| /** |
| * Acknowledge the success or failure in the receipt of SMS |
| * previously indicated via responseCdmaNewSms() |
| * |
| * @param serial Serial number of request. |
| * @param smsAck Cdma Sms ack to be sent described by CdmaSmsAck in types.hal |
| * |
| * Response callback is IRadioResponse.acknowledgeLastIncomingCdmaSmsResponse() |
| */ |
| oneway acknowledgeLastIncomingCdmaSms(int32_t serial, CdmaSmsAck smsAck); |
| |
| /** |
| * Request the setting of GSM/WCDMA Cell Broadcast SMS config. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getGsmBroadcastConfigResponse() |
| */ |
| oneway getGsmBroadcastConfig(int32_t serial); |
| |
| /** |
| * Set GSM/WCDMA Cell Broadcast SMS config |
| * |
| * @param serial Serial number of request. |
| * @param configInfo Setting of GSM/WCDMA Cell broadcast config |
| * |
| * Response callback is IRadioResponse.setGsmBroadcastConfigResponse() |
| */ |
| oneway setGsmBroadcastConfig(int32_t serial, vec<GsmBroadcastSmsConfigInfo> configInfo); |
| |
| /** |
| * Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS |
| * |
| * @param serial Serial number of request. |
| * @param activate indicates to activate or turn off the reception of GSM/WCDMA |
| * Cell Broadcast SMS. true = activate, false = turn off |
| * |
| * Response callback is IRadioResponse.setGsmBroadcastActivationResponse() |
| */ |
| oneway setGsmBroadcastActivation(int32_t serial, bool activate); |
| |
| /** |
| * Request the setting of CDMA Broadcast SMS config |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCdmaBroadcastConfigResponse() |
| */ |
| oneway getCdmaBroadcastConfig(int32_t serial); |
| |
| /** |
| * Set CDMA Broadcast SMS config |
| * |
| * @param serial Serial number of request. |
| * @param configInfo CDMA Broadcast SMS config to be set. |
| * |
| * Response callback is IRadioResponse.setCdmaBroadcastConfigResponse() |
| */ |
| oneway setCdmaBroadcastConfig(int32_t serial, vec<CdmaBroadcastSmsConfigInfo> configInfo); |
| |
| /** |
| * Enable or disable the reception of CDMA Cell Broadcast SMS |
| * |
| * @param serial Serial number of request. |
| * @param activate indicates to activate or turn off the reception of CDMA |
| * Cell Broadcast SMS. true = activate, false = turn off |
| * |
| * Response callback is IRadioResponse.setCdmaBroadcastActivationResponse() |
| */ |
| oneway setCdmaBroadcastActivation(int32_t serial, bool activate); |
| |
| /** |
| * Request the device MDN / H_SID / H_NID. |
| * The request is only allowed when CDMA subscription is available. When CDMA |
| * subscription is changed, application layer must re-issue the request to |
| * update the subscription information. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCDMASubscriptionResponse() |
| */ |
| oneway getCDMASubscription(int32_t serial); |
| |
| /** |
| * Stores a CDMA SMS message to RUIM memory. |
| * |
| * @param serial Serial number of request. |
| * @param cdmaSms CDMA message as defined by CdmaSmsWriteArgs in types.hal |
| * |
| * Response callback is IRadioResponse.writeSmsToRuimResponse() |
| */ |
| oneway writeSmsToRuim(int32_t serial, CdmaSmsWriteArgs cdmaSms); |
| |
| /** |
| * Deletes a CDMA SMS message from RUIM memory. |
| * |
| * @param serial Serial number of request. |
| * @param index record index of the message to delete |
| * |
| * Response callback is IRadioResponse.deleteSmsOnRuimResponse() |
| */ |
| oneway deleteSmsOnRuim(int32_t serial, int32_t index); |
| |
| /** |
| * Request the device ESN / MEID / IMEI / IMEISV. |
| * The request is always allowed and contains GSM and CDMA device identity. |
| * When CDMA subscription is changed the ESN/MEID changes. The application |
| * layer must re-issue the request to update the device identity in this case. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getDeviceIdentityResponse() |
| */ |
| oneway getDeviceIdentity(int32_t serial); |
| |
| /** |
| * Request the radio's system selection module to exit emergency |
| * callback mode. Radio must not respond with SUCCESS until the modem has |
| * completely exited from Emergency Callback Mode. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.exitEmergencyCallbackModeResponse() |
| */ |
| oneway exitEmergencyCallbackMode(int32_t serial); |
| |
| /** |
| * Get the default Short Message Service Center address on the device. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getSmscAddressResponse() |
| */ |
| oneway getSmscAddress(int32_t serial); |
| |
| /** |
| * Set the default Short Message Service Center address on the device. |
| * |
| * @param serial Serial number of request. |
| * @param smsc Short Message Service Center address to set |
| * |
| * Response callback is IRadioResponse.setSmscAddressResponse() |
| */ |
| oneway setSmscAddress(int32_t serial, string smsc); |
| |
| /** |
| * Indicates whether there is storage available for new SMS messages. |
| * |
| * @param serial Serial number of request. |
| * @param available true if memory is available for storing new messages, |
| * false if memory capacity is exceeded |
| * |
| * Response callback is IRadioResponse.reportSmsMemoryStatusResponse() |
| */ |
| oneway reportSmsMemoryStatus(int32_t serial, bool available); |
| |
| /** |
| * Indicates that the StkService is running and is |
| * ready to receive unsolicited stkXXXXX commands. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.reportStkServiceIsRunningResponse() |
| */ |
| oneway reportStkServiceIsRunning(int32_t serial); |
| |
| /** |
| * Request to query the location where the CDMA subscription shall be retrieved. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCdmaSubscriptionSourceResponse() |
| */ |
| oneway getCdmaSubscriptionSource(int32_t serial); |
| |
| /** |
| * Request the ISIM application on the UICC to perform AKA |
| * challenge/response algorithm for IMS authentication |
| * |
| * @param serial Serial number of request. |
| * @param challenge challenge string in Base64 format |
| * |
| * Response callback is IRadioResponse.requestIsimAuthenticationResponse() |
| */ |
| oneway requestIsimAuthentication(int32_t serial, string challenge); |
| |
| /** |
| * Acknowledge successful or failed receipt of SMS previously indicated |
| * via unsol responseNewSms(), including acknowledgement TPDU to send |
| * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU. |
| * |
| * @param serial Serial number of request. |
| * @param success true on successful receipt (send RP-ACK) |
| * false on failed receipt (send RP-ERROR) |
| * @param ackPdu acknowledgement TPDU in hexadecimal format |
| * |
| * Response callback is IRadioResponse.acknowledgeIncomingGsmSmsWithPduResponse() |
| */ |
| oneway acknowledgeIncomingGsmSmsWithPdu(int32_t serial, bool success, string ackPdu); |
| |
| /** |
| * Requests to send a SAT/USAT envelope command to SIM. |
| * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111. |
| * |
| * This request has one difference from sendEnvelope(): |
| * the SW1 and SW2 status bytes from the UICC response are returned along with |
| * the response data, using the same structure as iccIOForApp(). |
| * |
| * The implementation must perform normal processing of a '91XX' |
| * response in SW1/SW2 to retrieve the pending proactive command and send it |
| * as an unsolicited response, as sendEnvelope() does. |
| * |
| * @param serial Serial number of request. |
| * @param contents SAT/USAT command in hexadecimal format starting with command tag |
| * |
| * Response callback is IRadioResponse.sendEnvelopeWithStatusResponse() |
| */ |
| oneway sendEnvelopeWithStatus(int32_t serial, string contents); |
| |
| /** |
| * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only |
| * when radio state is not RADIO_STATE_UNAVAILABLE |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getVoiceRadioTechnologyResponse() |
| */ |
| oneway getVoiceRadioTechnology(int32_t serial); |
| |
| /** |
| * Request all of the current cell information known to the radio. The radio |
| * must return list of all current cells, including the neighboring cells. If for a particular |
| * cell information isn't known then the appropriate unknown value will be returned. |
| * This does not cause or change the rate of unsolicited cellInfoList(). |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getCellInfoListResponse() |
| */ |
| oneway getCellInfoList(int32_t serial); |
| |
| /** |
| * Sets the minimum time between when unsolicited cellInfoList() must be invoked. |
| * A value of 0, means invoke cellInfoList() when any of the reported |
| * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue |
| * a unsolicited cellInfoList(). |
| * |
| * @param serial Serial number of request. |
| * @param rate minimum time in milliseconds to indicate time between unsolicited cellInfoList() |
| * |
| * Response callback is IRadioResponse.setCellInfoListRateResponse() |
| */ |
| oneway setCellInfoListRate(int32_t serial, int32_t rate); |
| |
| /** |
| * Set an apn to initial attach network |
| * |
| * @param serial Serial number of request. |
| * @param dataProfileInfo data profile containing APN settings |
| * @param modemCognitive indicating the data profile was sent to the modem through |
| * setDataProfile earlier. |
| * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old |
| * RIL_InitialAttachApn must be filled accordingly based on the roaming |
| * condition. Note this is for backward compatibility with the old radio modem. |
| * The modem must not use this param for any other reason. |
| * |
| * Response callback is IRadioResponse.setInitialAttachApnResponse() |
| */ |
| oneway setInitialAttachApn(int32_t serial, DataProfileInfo dataProfileInfo, |
| bool modemCognitive, bool isRoaming); |
| |
| /** |
| * Request current IMS registration state |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getImsRegistrationStateResponse() |
| */ |
| oneway getImsRegistrationState(int32_t serial); |
| |
| /** |
| * Send a SMS message over IMS. |
| * Based on the return error, caller decides to resend if sending sms |
| * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry. |
| * In case of retry, data is encoded based on Voice Technology available. |
| * |
| * @param serial Serial number of request. |
| * @param message ImsSmsMessage as defined in types.hal to be sent |
| * |
| * Response callback is IRadioResponse.sendImsSmsResponse() |
| */ |
| oneway sendImsSms(int32_t serial, ImsSmsMessage message); |
| |
| /** |
| * Request APDU exchange on the basic channel. This command reflects TS 27.007 |
| * "generic SIM access" operation (+CSIM). The modem must ensure proper function |
| * of GSM/CDMA, and filter commands appropriately. It must filter |
| * channel management and SELECT by DF name commands. |
| * "sessionid" field must be ignored. |
| * |
| * @param serial Serial number of request. |
| * @param message SimApdu as defined in types.hal to be sent |
| * |
| * Response callback is IRadioResponse.iccTransmitApduBasicChannelResponse() |
| */ |
| oneway iccTransmitApduBasicChannel(int32_t serial, SimApdu message); |
| |
| /** |
| * Open a new logical channel and select the given application. This command |
| * reflects TS 27.007 "open logical channel" operation (+CCHO). |
| * |
| * @param serial Serial number of request. |
| * @param aid AID value, See ETSI 102.221 and 101.220. |
| * @param p2 P2 value, described in ISO 7816-4. Ignore if equal to P2Constant:NO_P2 |
| * |
| * Response callback is IRadioResponse.iccOpenLogicalChannelResponse() |
| */ |
| oneway iccOpenLogicalChannel(int32_t serial, string aid, int32_t p2); |
| |
| /** |
| * Close a previously opened logical channel. This command reflects TS 27.007 |
| * "close logical channel" operation (+CCHC). |
| * |
| * @param serial Serial number of request. |
| * @param channelId session id of the logical channel (+CCHC). |
| * |
| * Response callback is IRadioResponse.iccCloseLogicalChannelResponse() |
| */ |
| oneway iccCloseLogicalChannel(int32_t serial, int32_t channelId); |
| |
| /** |
| * Exchange APDUs with a UICC over a previously opened logical channel. This |
| * command reflects TS 27.007 "generic logical channel access" operation |
| * (+CGLA). The modem must filter channel management and SELECT by DF name |
| * commands. |
| * |
| * @param serial Serial number of request. |
| * @param message SimApdu as defined in types.hal to be sent |
| * |
| * Response callback is IRadioResponse.iccTransmitApduLogicalChannelResponse() |
| */ |
| oneway iccTransmitApduLogicalChannel(int32_t serial, SimApdu message); |
| |
| /** |
| * Read one of the radio NV items. |
| * This is used for device configuration by some CDMA operators. |
| * |
| * @param serial Serial number of request. |
| * @param itemId NvItem is radio NV item as defined in types.hal |
| * |
| * Response callback is IRadioResponse.nvReadItemResponse() |
| */ |
| oneway nvReadItem(int32_t serial, NvItem itemId); |
| |
| /** |
| * Write one of the radio NV items. |
| * This is used for device configuration by some CDMA operators. |
| * |
| * @param serial Serial number of request. |
| * @param item NvWriteItem as defined in types.hal |
| * |
| * Response callback is IRadioResponse.nvWriteItemResponse() |
| */ |
| oneway nvWriteItem(int32_t serial, NvWriteItem item); |
| |
| /** |
| * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. |
| * This is used for device configuration by some CDMA operators. |
| * |
| * @param serial Serial number of request. |
| * @param prl PRL as a byte array |
| * |
| * Response callback is IRadioResponse.nvWriteCdmaPrlResponse() |
| */ |
| oneway nvWriteCdmaPrl(int32_t serial, vec<uint8_t> prl); |
| |
| /** |
| * Reset the radio NV configuration to the factory state. |
| * This is used for device configuration by some CDMA operators. |
| * |
| * @param serial Serial number of request. |
| * @param resetType ResetNvType as defined in types.hal |
| * |
| * Response callback is IRadioResponse.nvResetConfigResponse() |
| */ |
| oneway nvResetConfig(int32_t serial, ResetNvType resetType); |
| |
| /** |
| * Selection/de-selection of a subscription from a SIM card |
| * |
| * @param serial Serial number of request. |
| * @param uiccSub SelectUiccSub as defined in types.hal |
| * |
| * Response callback is IRadioResponse.setUiccSubscriptionResponse() |
| */ |
| oneway setUiccSubscription(int32_t serial, SelectUiccSub uiccSub); |
| |
| /** |
| * Tells the modem whether data calls are allowed or not |
| * |
| * @param serial Serial number of request. |
| * @param allow true to allow data calls, false to disallow data calls |
| * |
| * Response callback is IRadioResponse.setDataAllowedResponse() |
| */ |
| oneway setDataAllowed(int32_t serial, bool allow); |
| |
| /** |
| * Request all of the current hardware (modem and sim) associated with Radio. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getHardwareConfigResponse() |
| */ |
| oneway getHardwareConfig(int32_t serial); |
| |
| /** |
| * Returns the response of SIM Authentication through Radio challenge request. |
| * |
| * @param serial Serial number of request. |
| * @param authContext P2 value of authentication command, see P2 parameter in |
| * 3GPP TS 31.102 7.1.2 |
| * @param authData the challenge string in Base64 format, see 3GPP TS 31.102 7.1.2 |
| * @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value |
| * |
| * Response callback is IRadioResponse.requestIccSimAuthenticationResponse() |
| */ |
| oneway requestIccSimAuthentication(int32_t serial, int32_t authContext, string authData, |
| string aid); |
| |
| /** |
| * Set data profile in modem. |
| * Modem must erase existed profiles from framework, and apply new profiles |
| * |
| * @param serial Serial number of request. |
| * @param profiles Array of DataProfiles to set. |
| * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old |
| * RIL API RIL_DataProfileInfo must be filled accordingly based on the |
| * roaming condition. Note this is for backward compatibility with the old |
| * radio modem. The modem must not use this param for any other reason. |
| * |
| * Response callback is IRadioResponse.setDataProfileResponse() |
| */ |
| oneway setDataProfile(int32_t serial, vec<DataProfileInfo> profiles, bool isRoaming); |
| |
| /** |
| * Device is shutting down. All further commands are ignored |
| * and RADIO_NOT_AVAILABLE must be returned. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.requestShutdownResponse() |
| */ |
| oneway requestShutdown(int32_t serial); |
| |
| /** |
| * Used to get phone radio capability. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getRadioCapabilityResponse() |
| */ |
| oneway getRadioCapability(int32_t serial); |
| |
| /** |
| * Used to set the phones radio capability. Be VERY careful |
| * using this request as it may cause some vendor modems to reset. Because |
| * of the possible modem reset any radio commands after this one may not be |
| * processed. |
| * |
| * @param serial Serial number of request. |
| * @param rc RadioCapability structure to be set |
| * |
| * Response callback is IRadioResponse.setRadioCapabilityResponse() |
| */ |
| oneway setRadioCapability(int32_t serial, RadioCapability rc); |
| |
| /** |
| * Start Link Capacity Estimate (LCE) service if supported by the radio. |
| * |
| * @param serial Serial number of request. |
| * @param reportInterval desired reporting interval (ms). |
| * @param pullMode LCE service mode. true: PULL; false: PUSH. |
| * |
| * Response callback is IRadioResponse.startLceServiceResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher which use the always-on LCE that relies on indications. |
| */ |
| oneway startLceService(int32_t serial, int32_t reportInterval, bool pullMode); |
| |
| /** |
| * Stop Link Capacity Estimate (LCE) service, the STOP operation must be |
| * idempotent for the radio modem. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.stopLceServiceResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher which use the always-on LCE that relies on indications. |
| */ |
| oneway stopLceService(int32_t serial); |
| |
| /** |
| * Pull LCE service for capacity information. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.pullLceDataResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher which use the always-on LCE that relies on indications. |
| */ |
| oneway pullLceData(int32_t serial); |
| |
| /** |
| * Get modem activity information for power consumption estimation. |
| * Request clear-on-read statistics information that is used for |
| * estimating the per-millisecond power consumption of the cellular |
| * modem. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getModemActivityInfoResponse() |
| */ |
| oneway getModemActivityInfo(int32_t serial); |
| |
| /** |
| * Set carrier restrictions. Expected modem behavior: |
| * If never receives this command |
| * - Must allow all carriers |
| * Receives this command with allAllowed true |
| * - Must allow all carriers. If a previously allowed SIM is present, modem must not reload |
| * the SIM. If a previously disallowed SIM is present, reload the SIM and notify Android. |
| * Receives this command with a list of carriers & allAllowed = false |
| * - Only allow specified carriers, persist across power cycles and FDR. If a present SIM |
| * is in the allowed list, modem must not reload the SIM. If a present SIM is *not* in |
| * the allowed list, modem must detach from the registered network and only keep emergency |
| * service, and notify Android SIM refresh reset with new SIM state being |
| * CardState:RESTRICTED. Emergency service must be enabled. |
| * |
| * @param serial Serial number of request. |
| * @param allAllowed true only when all carriers are allowed. Ignore "carriers" struct. |
| * If false, consider "carriers" struct |
| * @param carriers CarrierRestrictions consisting allowed and excluded carriers as defined |
| * in types.hal |
| * |
| * Response callback is IRadioResponse.setAllowedCarriersResponse() |
| */ |
| oneway setAllowedCarriers(int32_t serial, bool allAllowed, CarrierRestrictions carriers); |
| |
| /** |
| * Get carrier restrictions. |
| * |
| * @param serial Serial number of request. |
| * |
| * Response callback is IRadioResponse.getAllowedCarriersResponse() |
| */ |
| oneway getAllowedCarriers(int32_t serial); |
| |
| /** |
| * Send the updated device state. |
| * This is providing the device state information for the modem to perform power saving |
| * strategies. |
| * |
| * @param serial Serial number of request. |
| * @param deviceStateType The updated device state type. |
| * @param state The updated state. See the definition of state at DeviceStateType. |
| * |
| * Response callback is IRadioResponse.sendDeviceStateResponse() |
| */ |
| oneway sendDeviceState(int32_t serial, DeviceStateType deviceStateType, bool state); |
| |
| /** |
| * Set the indication filter. |
| * This is used to prevent unnecessary application processor wake up for power saving purposes |
| * by suppressing the indications in certain scenarios. |
| * |
| * @param serial Serial number of request. |
| * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the |
| * indications are enabled. See IndicationFilter for the definition of each bit. |
| * |
| * Response callback is IRadioResponse.setIndicationFilterResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.2 or higher, use @1.2::IRadio.setIndicationFilter_1_2() instead. |
| */ |
| oneway setIndicationFilter(int32_t serial, bitfield<IndicationFilter> indicationFilter); |
| |
| /** |
| * Set SIM card power state. |
| * Request is equivalent to inserting or removing the card. |
| * |
| * The radio modem must generate IRadioIndication.simStatusChanged() as if the SIM had been |
| * inserted or removed. |
| * |
| * @param serial Serial number of request |
| * @param powerUp True if powering up the sim card |
| * |
| * Response callback is IRadioResponse.setSimCardPowerResponse() which may return |
| * RadioError:REQUEST_NOT_SUPPORTED if @1.1::IRadio or higher is supported. |
| * |
| * DEPRECATED in @1.1 or higher, use @1.1::IRadio.setSimCardPower_1_1() instead. |
| */ |
| oneway setSimCardPower(int32_t serial, bool powerUp); |
| |
| /** |
| * When response type received from a radio indication or radio response is |
| * RadioIndicationType:UNSOLICITED_ACK_EXP or RadioResponseType:SOLICITED_ACK_EXP respectively, |
| * acknowledge the receipt of those messages by sending responseAcknowledgement(). |
| * |
| */ |
| oneway responseAcknowledgement(); |
| }; |