| /* |
| * Copyright (C) 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "bluetooth_hidl_hal_test" |
| #include <android-base/logging.h> |
| |
| #include <android/hardware/bluetooth/1.0/types.h> |
| #include <android/hardware/bluetooth/1.1/IBluetoothHci.h> |
| #include <android/hardware/bluetooth/1.1/IBluetoothHciCallbacks.h> |
| #include <hardware/bluetooth.h> |
| #include <utils/Log.h> |
| |
| #include <VtsHalHidlTargetCallbackBase.h> |
| #include <gtest/gtest.h> |
| #include <hidl/GtestPrinter.h> |
| #include <hidl/ServiceManagement.h> |
| |
| #include <chrono> |
| #include <queue> |
| #include <thread> |
| |
| using ::android::sp; |
| using ::android::hardware::hidl_death_recipient; |
| using ::android::hardware::hidl_vec; |
| using ::android::hardware::Return; |
| using ::android::hardware::Void; |
| using ::android::hardware::bluetooth::V1_0::Status; |
| using ::android::hardware::bluetooth::V1_1::IBluetoothHci; |
| using ::android::hardware::bluetooth::V1_1::IBluetoothHciCallbacks; |
| |
| #define HCI_MINIMUM_HCI_VERSION 5 // Bluetooth Core Specification 3.0 + HS |
| #define HCI_MINIMUM_LMP_VERSION 5 // Bluetooth Core Specification 3.0 + HS |
| #define NUM_HCI_COMMANDS_BANDWIDTH 1000 |
| #define NUM_SCO_PACKETS_BANDWIDTH 1000 |
| #define NUM_ACL_PACKETS_BANDWIDTH 1000 |
| #define WAIT_FOR_INIT_TIMEOUT std::chrono::milliseconds(2000) |
| #define WAIT_FOR_HCI_EVENT_TIMEOUT std::chrono::milliseconds(2000) |
| #define WAIT_FOR_SCO_DATA_TIMEOUT std::chrono::milliseconds(1000) |
| #define WAIT_FOR_ACL_DATA_TIMEOUT std::chrono::milliseconds(1000) |
| #define INTERFACE_CLOSE_DELAY_MS std::chrono::milliseconds(200) |
| |
| #define COMMAND_HCI_SHOULD_BE_UNKNOWN \ |
| { 0xff, 0x3B, 0x08, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 } |
| #define COMMAND_HCI_READ_LOCAL_VERSION_INFORMATION \ |
| { 0x01, 0x10, 0x00 } |
| #define COMMAND_HCI_READ_BUFFER_SIZE \ |
| { 0x05, 0x10, 0x00 } |
| #define COMMAND_HCI_WRITE_LOOPBACK_MODE_LOCAL \ |
| { 0x02, 0x18, 0x01, 0x01 } |
| #define COMMAND_HCI_RESET \ |
| { 0x03, 0x0c, 0x00 } |
| #define COMMAND_HCI_WRITE_LOCAL_NAME \ |
| { 0x13, 0x0c, 0xf8 } |
| #define HCI_STATUS_SUCCESS 0x00 |
| #define HCI_STATUS_UNKNOWN_HCI_COMMAND 0x01 |
| |
| #define EVENT_CONNECTION_COMPLETE 0x03 |
| #define EVENT_COMMAND_COMPLETE 0x0e |
| #define EVENT_COMMAND_STATUS 0x0f |
| #define EVENT_NUMBER_OF_COMPLETED_PACKETS 0x13 |
| #define EVENT_LOOPBACK_COMMAND 0x19 |
| |
| #define EVENT_CODE_BYTE 0 |
| #define EVENT_LENGTH_BYTE 1 |
| #define EVENT_FIRST_PAYLOAD_BYTE 2 |
| #define EVENT_COMMAND_STATUS_STATUS_BYTE 2 |
| #define EVENT_COMMAND_STATUS_ALLOWED_PACKETS_BYTE 3 |
| #define EVENT_COMMAND_STATUS_OPCODE_LSBYTE 4 // Bytes 4 and 5 |
| #define EVENT_COMMAND_COMPLETE_ALLOWED_PACKETS_BYTE 2 |
| #define EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE 3 // Bytes 3 and 4 |
| #define EVENT_COMMAND_COMPLETE_STATUS_BYTE 5 |
| #define EVENT_COMMAND_COMPLETE_FIRST_PARAM_BYTE 6 |
| #define EVENT_LOCAL_HCI_VERSION_BYTE EVENT_COMMAND_COMPLETE_FIRST_PARAM_BYTE |
| #define EVENT_LOCAL_LMP_VERSION_BYTE EVENT_LOCAL_HCI_VERSION_BYTE + 3 |
| |
| #define EVENT_CONNECTION_COMPLETE_PARAM_LENGTH 11 |
| #define EVENT_CONNECTION_COMPLETE_TYPE 11 |
| #define EVENT_CONNECTION_COMPLETE_TYPE_SCO 0 |
| #define EVENT_CONNECTION_COMPLETE_TYPE_ACL 1 |
| #define EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE 3 |
| #define EVENT_COMMAND_STATUS_LENGTH 4 |
| |
| #define EVENT_NUMBER_OF_COMPLETED_PACKETS_NUM_HANDLES 2 |
| |
| #define ACL_BROADCAST_FLAG_OFFSET 6 |
| #define ACL_BROADCAST_FLAG_POINT_TO_POINT 0x0 |
| #define ACL_BROADCAST_POINT_TO_POINT \ |
| (ACL_BROADCAST_FLAG_POINT_TO_POINT << ACL_BROADCAST_FLAG_OFFSET) |
| |
| #define ACL_PACKET_BOUNDARY_FLAG_OFFSET 4 |
| #define ACL_PACKET_BOUNDARY_FLAG_FIRST_AUTO_FLUSHABLE 0x2 |
| #define ACL_PACKET_BOUNDARY_FIRST_AUTO_FLUSHABLE \ |
| (ACL_PACKET_BOUNDARY_FLAG_FIRST_AUTO_FLUSHABLE \ |
| << ACL_PACKET_BOUNDARY_FLAG_OFFSET) |
| |
| // To be removed in VTS release builds |
| #define ACL_HANDLE_QCA_DEBUG_MESSAGE 0xedc |
| |
| constexpr char kCallbackNameAclEventReceived[] = "aclDataReceived"; |
| constexpr char kCallbackNameHciEventReceived[] = "hciEventReceived"; |
| constexpr char kCallbackNameInitializationComplete[] = "initializationComplete"; |
| constexpr char kCallbackNameScoEventReceived[] = "scoDataReceived"; |
| constexpr char kCallbackNameIsoEventReceived[] = "isoDataReceived"; |
| |
| class ThroughputLogger { |
| public: |
| ThroughputLogger(std::string task) |
| : task_(task), start_time_(std::chrono::steady_clock::now()) {} |
| |
| ~ThroughputLogger() { |
| if (total_bytes_ == 0) return; |
| std::chrono::duration<double> duration = |
| std::chrono::steady_clock::now() - start_time_; |
| double s = duration.count(); |
| if (s == 0) return; |
| double rate_kb = (static_cast<double>(total_bytes_) / s) / 1024; |
| ALOGD("%s %.1f KB/s (%zu bytes in %.3fs)", task_.c_str(), rate_kb, |
| total_bytes_, s); |
| } |
| |
| void setTotalBytes(size_t total_bytes) { total_bytes_ = total_bytes; } |
| |
| private: |
| size_t total_bytes_; |
| std::string task_; |
| std::chrono::steady_clock::time_point start_time_; |
| }; |
| |
| // The main test class for Bluetooth HIDL HAL. |
| class BluetoothHidlTest : public ::testing::TestWithParam<std::string> { |
| public: |
| virtual void SetUp() override { |
| // currently test passthrough mode only |
| bluetooth = IBluetoothHci::getService(GetParam()); |
| ASSERT_NE(bluetooth, nullptr); |
| ALOGI("%s: getService() for bluetooth is %s", __func__, |
| bluetooth->isRemote() ? "remote" : "local"); |
| |
| bluetooth_hci_death_recipient = new BluetoothHciDeathRecipient(); |
| ASSERT_NE(bluetooth_hci_death_recipient, nullptr); |
| ASSERT_TRUE( |
| bluetooth->linkToDeath(bluetooth_hci_death_recipient, 0).isOk()); |
| |
| bluetooth_cb = new BluetoothHciCallbacks(*this); |
| ASSERT_NE(bluetooth_cb, nullptr); |
| |
| max_acl_data_packet_length = 0; |
| max_sco_data_packet_length = 0; |
| max_acl_data_packets = 0; |
| max_sco_data_packets = 0; |
| |
| initialized = false; |
| event_cb_count = 0; |
| acl_cb_count = 0; |
| sco_cb_count = 0; |
| |
| ASSERT_FALSE(initialized); |
| // Should not be checked in production code |
| ASSERT_TRUE(bluetooth->initialize(bluetooth_cb).isOk()); |
| |
| bluetooth_cb->SetWaitTimeout(kCallbackNameInitializationComplete, |
| WAIT_FOR_INIT_TIMEOUT); |
| bluetooth_cb->SetWaitTimeout(kCallbackNameHciEventReceived, |
| WAIT_FOR_HCI_EVENT_TIMEOUT); |
| bluetooth_cb->SetWaitTimeout(kCallbackNameAclEventReceived, |
| WAIT_FOR_ACL_DATA_TIMEOUT); |
| bluetooth_cb->SetWaitTimeout(kCallbackNameScoEventReceived, |
| WAIT_FOR_SCO_DATA_TIMEOUT); |
| |
| EXPECT_TRUE( |
| bluetooth_cb->WaitForCallback(kCallbackNameInitializationComplete) |
| .no_timeout); |
| |
| ASSERT_TRUE(initialized); |
| } |
| |
| virtual void TearDown() override { |
| ALOGI("TearDown"); |
| // Should not be checked in production code |
| ASSERT_TRUE(bluetooth->close().isOk()); |
| std::this_thread::sleep_for(INTERFACE_CLOSE_DELAY_MS); |
| handle_no_ops(); |
| EXPECT_EQ(static_cast<size_t>(0), event_queue.size()); |
| EXPECT_EQ(static_cast<size_t>(0), sco_queue.size()); |
| EXPECT_EQ(static_cast<size_t>(0), acl_queue.size()); |
| EXPECT_EQ(static_cast<size_t>(0), iso_queue.size()); |
| } |
| |
| void setBufferSizes(); |
| |
| // Functions called from within tests in loopback mode |
| void sendAndCheckHCI(int num_packets); |
| void sendAndCheckSCO(int num_packets, size_t size, uint16_t handle); |
| void sendAndCheckACL(int num_packets, size_t size, uint16_t handle); |
| |
| // Helper functions to try to get a handle on verbosity |
| void enterLoopbackMode(std::vector<uint16_t>* sco_handles, |
| std::vector<uint16_t>* acl_handles); |
| void handle_no_ops(); |
| void wait_for_event(bool timeout_is_error); |
| void wait_for_command_complete_event(hidl_vec<uint8_t> cmd); |
| int wait_for_completed_packets_event(uint16_t handle); |
| |
| class BluetoothHciDeathRecipient : public hidl_death_recipient { |
| public: |
| void serviceDied( |
| uint64_t /*cookie*/, |
| const android::wp<::android::hidl::base::V1_0::IBase>& /*who*/) |
| override { |
| FAIL(); |
| } |
| }; |
| |
| // A simple test implementation of BluetoothHciCallbacks. |
| class BluetoothHciCallbacks |
| : public ::testing::VtsHalHidlTargetCallbackBase<BluetoothHidlTest>, |
| public IBluetoothHciCallbacks { |
| BluetoothHidlTest& parent_; |
| |
| public: |
| BluetoothHciCallbacks(BluetoothHidlTest& parent) : parent_(parent){}; |
| |
| virtual ~BluetoothHciCallbacks() = default; |
| |
| Return<void> initializationComplete(Status status) override { |
| parent_.initialized = (status == Status::SUCCESS); |
| NotifyFromCallback(kCallbackNameInitializationComplete); |
| ALOGV("%s (status = %d)", __func__, static_cast<int>(status)); |
| return Void(); |
| }; |
| |
| Return<void> hciEventReceived( |
| const ::android::hardware::hidl_vec<uint8_t>& event) override { |
| parent_.event_cb_count++; |
| parent_.event_queue.push(event); |
| NotifyFromCallback(kCallbackNameHciEventReceived); |
| ALOGV("Event received (length = %d)", static_cast<int>(event.size())); |
| return Void(); |
| }; |
| |
| Return<void> aclDataReceived( |
| const ::android::hardware::hidl_vec<uint8_t>& data) override { |
| parent_.acl_cb_count++; |
| parent_.acl_queue.push(data); |
| NotifyFromCallback(kCallbackNameAclEventReceived); |
| return Void(); |
| }; |
| |
| Return<void> scoDataReceived( |
| const ::android::hardware::hidl_vec<uint8_t>& data) override { |
| parent_.sco_cb_count++; |
| parent_.sco_queue.push(data); |
| NotifyFromCallback(kCallbackNameScoEventReceived); |
| return Void(); |
| }; |
| |
| Return<void> isoDataReceived( |
| const ::android::hardware::hidl_vec<uint8_t>& data) override { |
| parent_.iso_cb_count++; |
| parent_.iso_queue.push(data); |
| NotifyFromCallback(kCallbackNameIsoEventReceived); |
| return Void(); |
| }; |
| }; |
| |
| sp<IBluetoothHci> bluetooth; |
| sp<BluetoothHciCallbacks> bluetooth_cb; |
| sp<BluetoothHciDeathRecipient> bluetooth_hci_death_recipient; |
| std::queue<hidl_vec<uint8_t>> event_queue; |
| std::queue<hidl_vec<uint8_t>> acl_queue; |
| std::queue<hidl_vec<uint8_t>> sco_queue; |
| std::queue<hidl_vec<uint8_t>> iso_queue; |
| |
| bool initialized; |
| |
| int event_cb_count; |
| int sco_cb_count; |
| int acl_cb_count; |
| int iso_cb_count; |
| |
| int max_acl_data_packet_length; |
| int max_sco_data_packet_length; |
| int max_acl_data_packets; |
| int max_sco_data_packets; |
| }; |
| |
| // Discard NO-OPs from the event queue. |
| void BluetoothHidlTest::handle_no_ops() { |
| while (event_queue.size() > 0) { |
| hidl_vec<uint8_t> event = event_queue.front(); |
| EXPECT_GE(event.size(), |
| static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE)); |
| bool event_is_no_op = |
| (event[EVENT_CODE_BYTE] == EVENT_COMMAND_COMPLETE) && |
| (event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE] == 0x00) && |
| (event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1] == 0x00); |
| event_is_no_op |= (event[EVENT_CODE_BYTE] == EVENT_COMMAND_STATUS) && |
| (event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE] == 0x00) && |
| (event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE + 1] == 0x00); |
| if (event_is_no_op) { |
| event_queue.pop(); |
| } else { |
| break; |
| } |
| } |
| // To be removed in VTS release builds |
| while (acl_queue.size() > 0) { |
| hidl_vec<uint8_t> acl_packet = acl_queue.front(); |
| uint16_t connection_handle = acl_packet[1] & 0xF; |
| connection_handle <<= 8; |
| connection_handle |= acl_packet[0]; |
| bool packet_is_no_op = connection_handle == ACL_HANDLE_QCA_DEBUG_MESSAGE; |
| if (packet_is_no_op) { |
| acl_queue.pop(); |
| } else { |
| break; |
| } |
| } |
| } |
| |
| // Receive an event, discarding NO-OPs. |
| void BluetoothHidlTest::wait_for_event(bool timeout_is_error = true) { |
| hidl_vec<uint8_t> event; |
| do { |
| bool no_timeout = |
| bluetooth_cb->WaitForCallback(kCallbackNameHciEventReceived).no_timeout; |
| EXPECT_TRUE(no_timeout || !timeout_is_error); |
| if (no_timeout && timeout_is_error) { |
| EXPECT_LT(static_cast<size_t>(0), event_queue.size()); |
| } |
| if (event_queue.size() == 0) { |
| // WaitForCallback timed out. |
| return; |
| } |
| handle_no_ops(); |
| } while (event_queue.size() == 0); |
| } |
| |
| // Wait until a COMMAND_COMPLETE is received. |
| void BluetoothHidlTest::wait_for_command_complete_event(hidl_vec<uint8_t> cmd) { |
| wait_for_event(); |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| |
| EXPECT_GT(event.size(), |
| static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE)); |
| EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]); |
| } |
| |
| // Send the command to read the controller's buffer sizes. |
| void BluetoothHidlTest::setBufferSizes() { |
| hidl_vec<uint8_t> cmd = COMMAND_HCI_READ_BUFFER_SIZE; |
| bluetooth->sendHciCommand(cmd); |
| |
| wait_for_event(); |
| if (event_queue.size() == 0) return; |
| |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| |
| EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]); |
| |
| max_acl_data_packet_length = |
| event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 1] + |
| (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 2] << 8); |
| max_sco_data_packet_length = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 3]; |
| max_acl_data_packets = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 4] + |
| (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 5] << 8); |
| max_sco_data_packets = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 6] + |
| (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 7] << 8); |
| |
| ALOGD("%s: ACL max %d num %d SCO max %d num %d", __func__, |
| static_cast<int>(max_acl_data_packet_length), |
| static_cast<int>(max_acl_data_packets), |
| static_cast<int>(max_sco_data_packet_length), |
| static_cast<int>(max_sco_data_packets)); |
| } |
| |
| // Send an HCI command (in Loopback mode) and check the response. |
| void BluetoothHidlTest::sendAndCheckHCI(int num_packets) { |
| ThroughputLogger logger = {__func__}; |
| int command_size = 0; |
| for (int n = 0; n < num_packets; n++) { |
| // Send an HCI packet |
| std::vector<uint8_t> write_name = COMMAND_HCI_WRITE_LOCAL_NAME; |
| // With a name |
| char new_name[] = "John Jacob Jingleheimer Schmidt ___________________0"; |
| size_t new_name_length = strlen(new_name); |
| for (size_t i = 0; i < new_name_length; i++) |
| write_name.push_back(static_cast<uint8_t>(new_name[i])); |
| // And the packet number |
| size_t i = new_name_length - 1; |
| for (int digits = n; digits > 0; digits = digits / 10, i--) |
| write_name[i] = static_cast<uint8_t>('0' + digits % 10); |
| // And padding |
| for (size_t i = 0; i < 248 - new_name_length; i++) |
| write_name.push_back(static_cast<uint8_t>(0)); |
| |
| hidl_vec<uint8_t> cmd = write_name; |
| bluetooth->sendHciCommand(cmd); |
| |
| // Check the loopback of the HCI packet |
| wait_for_event(); |
| if (event_queue.size() == 0) return; |
| |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| size_t compare_length = |
| (cmd.size() > static_cast<size_t>(0xff) ? static_cast<size_t>(0xff) |
| : cmd.size()); |
| EXPECT_GT(event.size(), compare_length + EVENT_FIRST_PAYLOAD_BYTE - 1); |
| |
| EXPECT_EQ(EVENT_LOOPBACK_COMMAND, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(compare_length, event[EVENT_LENGTH_BYTE]); |
| |
| // Don't compare past the end of the event. |
| if (compare_length + EVENT_FIRST_PAYLOAD_BYTE > event.size()) { |
| compare_length = event.size() - EVENT_FIRST_PAYLOAD_BYTE; |
| ALOGE("Only comparing %d bytes", static_cast<int>(compare_length)); |
| } |
| |
| if (n == num_packets - 1) { |
| command_size = cmd.size(); |
| } |
| |
| for (size_t i = 0; i < compare_length; i++) |
| EXPECT_EQ(cmd[i], event[EVENT_FIRST_PAYLOAD_BYTE + i]); |
| } |
| logger.setTotalBytes(command_size * num_packets * 2); |
| } |
| |
| // Send a SCO data packet (in Loopback mode) and check the response. |
| void BluetoothHidlTest::sendAndCheckSCO(int num_packets, size_t size, |
| uint16_t handle) { |
| ThroughputLogger logger = {__func__}; |
| for (int n = 0; n < num_packets; n++) { |
| // Send a SCO packet |
| hidl_vec<uint8_t> sco_packet; |
| std::vector<uint8_t> sco_vector; |
| sco_vector.push_back(static_cast<uint8_t>(handle & 0xff)); |
| sco_vector.push_back(static_cast<uint8_t>((handle & 0x0f00) >> 8)); |
| sco_vector.push_back(static_cast<uint8_t>(size & 0xff)); |
| sco_vector.push_back(static_cast<uint8_t>((size & 0xff00) >> 8)); |
| for (size_t i = 0; i < size; i++) { |
| sco_vector.push_back(static_cast<uint8_t>(i + n)); |
| } |
| sco_packet = sco_vector; |
| bluetooth->sendScoData(sco_vector); |
| |
| // Check the loopback of the SCO packet |
| EXPECT_TRUE(bluetooth_cb->WaitForCallback(kCallbackNameScoEventReceived) |
| .no_timeout); |
| hidl_vec<uint8_t> sco_loopback = sco_queue.front(); |
| sco_queue.pop(); |
| |
| EXPECT_EQ(sco_packet.size(), sco_loopback.size()); |
| size_t successful_bytes = 0; |
| |
| for (size_t i = 0; i < sco_packet.size(); i++) { |
| if (sco_packet[i] == sco_loopback[i]) { |
| successful_bytes = i; |
| } else { |
| ALOGE("Miscompare at %d (expected %x, got %x)", static_cast<int>(i), |
| sco_packet[i], sco_loopback[i]); |
| ALOGE("At %d (expected %x, got %x)", static_cast<int>(i + 1), |
| sco_packet[i + 1], sco_loopback[i + 1]); |
| break; |
| } |
| } |
| EXPECT_EQ(sco_packet.size(), successful_bytes + 1); |
| } |
| logger.setTotalBytes(num_packets * size * 2); |
| } |
| |
| // Send an ACL data packet (in Loopback mode) and check the response. |
| void BluetoothHidlTest::sendAndCheckACL(int num_packets, size_t size, |
| uint16_t handle) { |
| ThroughputLogger logger = {__func__}; |
| for (int n = 0; n < num_packets; n++) { |
| // Send an ACL packet |
| hidl_vec<uint8_t> acl_packet; |
| std::vector<uint8_t> acl_vector; |
| acl_vector.push_back(static_cast<uint8_t>(handle & 0xff)); |
| acl_vector.push_back(static_cast<uint8_t>((handle & 0x0f00) >> 8) | |
| ACL_BROADCAST_POINT_TO_POINT | |
| ACL_PACKET_BOUNDARY_FIRST_AUTO_FLUSHABLE); |
| acl_vector.push_back(static_cast<uint8_t>(size & 0xff)); |
| acl_vector.push_back(static_cast<uint8_t>((size & 0xff00) >> 8)); |
| for (size_t i = 0; i < size; i++) { |
| acl_vector.push_back(static_cast<uint8_t>(i + n)); |
| } |
| acl_packet = acl_vector; |
| bluetooth->sendAclData(acl_vector); |
| |
| // Check the loopback of the ACL packet |
| EXPECT_TRUE(bluetooth_cb->WaitForCallback(kCallbackNameAclEventReceived) |
| .no_timeout); |
| hidl_vec<uint8_t> acl_loopback = acl_queue.front(); |
| acl_queue.pop(); |
| |
| EXPECT_EQ(acl_packet.size(), acl_loopback.size()); |
| size_t successful_bytes = 0; |
| |
| for (size_t i = 0; i < acl_packet.size(); i++) { |
| if (acl_packet[i] == acl_loopback[i]) { |
| successful_bytes = i; |
| } else { |
| ALOGE("Miscompare at %d (expected %x, got %x)", static_cast<int>(i), |
| acl_packet[i], acl_loopback[i]); |
| ALOGE("At %d (expected %x, got %x)", static_cast<int>(i + 1), |
| acl_packet[i + 1], acl_loopback[i + 1]); |
| break; |
| } |
| } |
| EXPECT_EQ(acl_packet.size(), successful_bytes + 1); |
| } |
| logger.setTotalBytes(num_packets * size * 2); |
| } |
| |
| // Return the number of completed packets reported by the controller. |
| int BluetoothHidlTest::wait_for_completed_packets_event(uint16_t handle) { |
| int packets_processed = 0; |
| wait_for_event(false); |
| if (event_queue.size() == 0) { |
| ALOGW("%s: WaitForCallback timed out.", __func__); |
| return packets_processed; |
| } |
| while (event_queue.size() > 0) { |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| |
| EXPECT_EQ(EVENT_NUMBER_OF_COMPLETED_PACKETS, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(1, event[EVENT_NUMBER_OF_COMPLETED_PACKETS_NUM_HANDLES]); |
| |
| uint16_t event_handle = event[3] + (event[4] << 8); |
| EXPECT_EQ(handle, event_handle); |
| |
| packets_processed += event[5] + (event[6] << 8); |
| } |
| return packets_processed; |
| } |
| |
| // Send local loopback command and initialize SCO and ACL handles. |
| void BluetoothHidlTest::enterLoopbackMode(std::vector<uint16_t>* sco_handles, |
| std::vector<uint16_t>* acl_handles) { |
| hidl_vec<uint8_t> cmd = COMMAND_HCI_WRITE_LOOPBACK_MODE_LOCAL; |
| bluetooth->sendHciCommand(cmd); |
| |
| // Receive connection complete events with data channels |
| int connection_event_count = 0; |
| bool command_complete_received = false; |
| while (true) { |
| wait_for_event(false); |
| if (event_queue.size() == 0) { |
| // Fail if there was no event received or no connections completed. |
| EXPECT_TRUE(command_complete_received); |
| EXPECT_LT(0, connection_event_count); |
| return; |
| } |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| EXPECT_GT(event.size(), |
| static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE)); |
| if (event[EVENT_CODE_BYTE] == EVENT_CONNECTION_COMPLETE) { |
| EXPECT_GT(event.size(), |
| static_cast<size_t>(EVENT_CONNECTION_COMPLETE_TYPE)); |
| EXPECT_EQ(event[EVENT_LENGTH_BYTE], |
| EVENT_CONNECTION_COMPLETE_PARAM_LENGTH); |
| uint8_t connection_type = event[EVENT_CONNECTION_COMPLETE_TYPE]; |
| |
| EXPECT_TRUE(connection_type == EVENT_CONNECTION_COMPLETE_TYPE_SCO || |
| connection_type == EVENT_CONNECTION_COMPLETE_TYPE_ACL); |
| |
| // Save handles |
| uint16_t handle = event[EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE] | |
| event[EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE + 1] << 8; |
| if (connection_type == EVENT_CONNECTION_COMPLETE_TYPE_SCO) |
| sco_handles->push_back(handle); |
| else |
| acl_handles->push_back(handle); |
| |
| ALOGD("Connect complete type = %d handle = %d", |
| event[EVENT_CONNECTION_COMPLETE_TYPE], handle); |
| connection_event_count++; |
| } else { |
| EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]); |
| command_complete_received = true; |
| } |
| } |
| } |
| |
| // Empty test: Initialize()/Close() are called in SetUp()/TearDown(). |
| TEST_P(BluetoothHidlTest, InitializeAndClose) {} |
| |
| // Send an HCI Reset with sendHciCommand and wait for a command complete event. |
| TEST_P(BluetoothHidlTest, HciReset) { |
| hidl_vec<uint8_t> cmd = COMMAND_HCI_RESET; |
| bluetooth->sendHciCommand(cmd); |
| |
| wait_for_command_complete_event(cmd); |
| } |
| |
| // Read and check the HCI version of the controller. |
| TEST_P(BluetoothHidlTest, HciVersionTest) { |
| hidl_vec<uint8_t> cmd = COMMAND_HCI_READ_LOCAL_VERSION_INFORMATION; |
| bluetooth->sendHciCommand(cmd); |
| |
| wait_for_event(); |
| if (event_queue.size() == 0) return; |
| |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| EXPECT_GT(event.size(), static_cast<size_t>(EVENT_LOCAL_LMP_VERSION_BYTE)); |
| |
| EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]); |
| |
| EXPECT_LE(HCI_MINIMUM_HCI_VERSION, event[EVENT_LOCAL_HCI_VERSION_BYTE]); |
| EXPECT_LE(HCI_MINIMUM_LMP_VERSION, event[EVENT_LOCAL_LMP_VERSION_BYTE]); |
| } |
| |
| // Send an unknown HCI command and wait for the error message. |
| TEST_P(BluetoothHidlTest, HciUnknownCommand) { |
| hidl_vec<uint8_t> cmd = COMMAND_HCI_SHOULD_BE_UNKNOWN; |
| bluetooth->sendHciCommand(cmd); |
| |
| wait_for_event(); |
| if (event_queue.size() == 0) return; |
| |
| hidl_vec<uint8_t> event = event_queue.front(); |
| event_queue.pop(); |
| |
| EXPECT_GT(event.size(), |
| static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE)); |
| if (event[EVENT_CODE_BYTE] == EVENT_COMMAND_COMPLETE) { |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_UNKNOWN_HCI_COMMAND, |
| event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]); |
| } else { |
| EXPECT_EQ(EVENT_COMMAND_STATUS, event[EVENT_CODE_BYTE]); |
| EXPECT_EQ(cmd[0], event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE]); |
| EXPECT_EQ(cmd[1], event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE + 1]); |
| EXPECT_EQ(HCI_STATUS_UNKNOWN_HCI_COMMAND, |
| event[EVENT_COMMAND_STATUS_STATUS_BYTE]); |
| } |
| } |
| |
| // Enter loopback mode, but don't send any packets. |
| TEST_P(BluetoothHidlTest, WriteLoopbackMode) { |
| std::vector<uint16_t> sco_connection_handles; |
| std::vector<uint16_t> acl_connection_handles; |
| enterLoopbackMode(&sco_connection_handles, &acl_connection_handles); |
| } |
| |
| // Enter loopback mode and send single packets. |
| TEST_P(BluetoothHidlTest, LoopbackModeSinglePackets) { |
| setBufferSizes(); |
| |
| std::vector<uint16_t> sco_connection_handles; |
| std::vector<uint16_t> acl_connection_handles; |
| enterLoopbackMode(&sco_connection_handles, &acl_connection_handles); |
| |
| sendAndCheckHCI(1); |
| |
| // This should work, but breaks on some current platforms. Figure out how to |
| // grandfather older devices but test new ones. |
| if (0 && sco_connection_handles.size() > 0) { |
| EXPECT_LT(0, max_sco_data_packet_length); |
| sendAndCheckSCO(1, max_sco_data_packet_length, sco_connection_handles[0]); |
| int sco_packets_sent = 1; |
| int completed_packets = |
| wait_for_completed_packets_event(sco_connection_handles[0]); |
| if (sco_packets_sent != completed_packets) { |
| ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, |
| sco_packets_sent, completed_packets); |
| } |
| } |
| |
| if (acl_connection_handles.size() > 0) { |
| EXPECT_LT(0, max_acl_data_packet_length); |
| sendAndCheckACL(1, max_acl_data_packet_length, acl_connection_handles[0]); |
| int acl_packets_sent = 1; |
| int completed_packets = |
| wait_for_completed_packets_event(acl_connection_handles[0]); |
| if (acl_packets_sent != completed_packets) { |
| ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, |
| acl_packets_sent, completed_packets); |
| } |
| } |
| } |
| |
| // Enter loopback mode and send packets for bandwidth measurements. |
| TEST_P(BluetoothHidlTest, LoopbackModeBandwidth) { |
| setBufferSizes(); |
| |
| std::vector<uint16_t> sco_connection_handles; |
| std::vector<uint16_t> acl_connection_handles; |
| enterLoopbackMode(&sco_connection_handles, &acl_connection_handles); |
| |
| sendAndCheckHCI(NUM_HCI_COMMANDS_BANDWIDTH); |
| |
| // This should work, but breaks on some current platforms. Figure out how to |
| // grandfather older devices but test new ones. |
| if (0 && sco_connection_handles.size() > 0) { |
| EXPECT_LT(0, max_sco_data_packet_length); |
| sendAndCheckSCO(NUM_SCO_PACKETS_BANDWIDTH, max_sco_data_packet_length, |
| sco_connection_handles[0]); |
| int sco_packets_sent = NUM_SCO_PACKETS_BANDWIDTH; |
| int completed_packets = |
| wait_for_completed_packets_event(sco_connection_handles[0]); |
| if (sco_packets_sent != completed_packets) { |
| ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, |
| sco_packets_sent, completed_packets); |
| } |
| } |
| |
| if (acl_connection_handles.size() > 0) { |
| EXPECT_LT(0, max_acl_data_packet_length); |
| sendAndCheckACL(NUM_ACL_PACKETS_BANDWIDTH, max_acl_data_packet_length, |
| acl_connection_handles[0]); |
| int acl_packets_sent = NUM_ACL_PACKETS_BANDWIDTH; |
| int completed_packets = |
| wait_for_completed_packets_event(acl_connection_handles[0]); |
| if (acl_packets_sent != completed_packets) { |
| ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, |
| acl_packets_sent, completed_packets); |
| } |
| } |
| } |
| |
| GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(BluetoothHidlTest); |
| INSTANTIATE_TEST_SUITE_P( |
| PerInstance, BluetoothHidlTest, |
| testing::ValuesIn( |
| android::hardware::getAllHalInstanceNames(IBluetoothHci::descriptor)), |
| android::hardware::PrintInstanceNameToString); |