| /* |
| * Copyright 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.wifi.supplicant@1.3; |
| |
| import @1.0::ISupplicantStaNetwork; |
| import @1.0::SupplicantStatus; |
| import @1.2::ISupplicantStaNetwork; |
| |
| /** |
| * Interface exposed by the supplicant for each station mode network |
| * configuration it controls. |
| */ |
| interface ISupplicantStaNetwork extends @1.2::ISupplicantStaNetwork { |
| /** |
| * Possible mask of values for Proto param. |
| */ |
| enum ProtoMask : @1.0::ISupplicantStaNetwork.ProtoMask { |
| WAPI = 1 << 2, |
| }; |
| |
| /** |
| * Possible mask of values for KeyMgmt param. |
| */ |
| enum KeyMgmtMask : @1.2::ISupplicantStaNetwork.KeyMgmtMask { |
| /* |
| * WAPI Psk |
| */ |
| WAPI_PSK = 1 << 12, |
| /** |
| * WAPI Cert |
| */ |
| WAPI_CERT = 1 << 13, |
| /** |
| * FILS shared key authentication with sha-256 |
| */ |
| FILS_SHA256 = 1 << 18, |
| /** |
| * FILS shared key authentication with sha-384 |
| */ |
| FILS_SHA384 = 1 << 19, |
| }; |
| |
| /** |
| * Possible mask of values for PairwiseCipher param. |
| */ |
| enum PairwiseCipherMask : @1.2::ISupplicantStaNetwork.PairwiseCipherMask { |
| /** |
| * SMS4 Pairwise Cipher |
| */ |
| SMS4 = 1 << 7, |
| }; |
| |
| /** |
| * Possible mask of values for GroupCipher param. |
| */ |
| enum GroupCipherMask : @1.2::ISupplicantStaNetwork.GroupCipherMask { |
| /** |
| * SMS4 Group Cipher |
| */ |
| SMS4 = 1 << 7, |
| }; |
| |
| /** |
| * Possible mask of values for AuthAlg param. |
| */ |
| enum AuthAlgMask : @1.0::ISupplicantStaNetwork.AuthAlgMask { |
| SAE = 1 << 4, |
| }; |
| |
| /** |
| * Set OCSP (Online Certificate Status Protocol) type for this network. |
| * |
| * @param ocspType value to set. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| */ |
| setOcsp(OcspType ocspType) generates (SupplicantStatus status); |
| |
| /** |
| * Get OCSP (Online Certificate Status Protocol) type for this network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| * @return ocspType ocsp type. |
| */ |
| getOcsp() generates (SupplicantStatus status, OcspType ocspType); |
| |
| /** |
| * Set key management mask for the network. |
| * |
| * @param keyMgmtMask value to set. |
| * Combination of |KeyMgmtMask| values. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| */ |
| setKeyMgmt_1_3(bitfield<KeyMgmtMask> keyMgmtMask) generates (SupplicantStatus status); |
| |
| /** |
| * Get the key mgmt mask set for the network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| * @return keyMgmtMask Combination of |KeyMgmtMask| values. |
| */ |
| getKeyMgmt_1_3() generates (SupplicantStatus status, bitfield<KeyMgmtMask> keyMgmtMask); |
| |
| /** |
| * Set proto mask for the network. |
| * |
| * @param protoMask value to set. |
| * Combination of |ProtoMask| values. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| */ |
| setProto_1_3(bitfield<ProtoMask> protoMask) generates (SupplicantStatus status); |
| |
| /** |
| * Get the proto mask set for the network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| * @return protoMask Combination of |ProtoMask| values. |
| */ |
| getProto_1_3() generates (SupplicantStatus status, bitfield<ProtoMask> protoMask); |
| |
| /** |
| * Set group cipher mask for the network. |
| * |
| * @param groupCipherMask value to set. |
| * Combination of |ProtoMask| values. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| */ |
| setGroupCipher_1_3(bitfield<GroupCipherMask> groupCipherMask) |
| generates (SupplicantStatus status); |
| |
| /** |
| * Get the pairwise cipher mask set for the network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| * @return pairwiseCipherMask Combination of |PairwiseCipherMask| values. |
| */ |
| getPairwiseCipher_1_3() |
| generates (SupplicantStatus status, bitfield<PairwiseCipherMask> pairwiseCipherMask); |
| |
| /** |
| * Set pairwise cipher mask for the network. |
| * |
| * @param pairwiseCipherMask value to set. |
| * Combination of |ProtoMask| values. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| */ |
| setPairwiseCipher_1_3(bitfield<PairwiseCipherMask> pairwiseCipherMask) |
| generates (SupplicantStatus status); |
| |
| /** |
| * Get the group cipher mask set for the network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| * @return groupCipherMask Combination of |GroupCipherMask| values. |
| */ |
| getGroupCipher_1_3() |
| generates (SupplicantStatus status, bitfield<GroupCipherMask> groupCipherMask); |
| |
| /** |
| * Set WAPI certificate suite name for this network. |
| * |
| * @param suite value to set. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| */ |
| setWapiCertSuite(string suite) generates (SupplicantStatus status); |
| |
| /** |
| * Get WAPI certificate suite name set for this network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN| |
| * @return suite The name of a suite. |
| */ |
| getWapiCertSuite() generates (SupplicantStatus status, string suite); |
| |
| /** |
| * Add a pairwise master key (PMK) into supplicant PMK cache. |
| * |
| * @param serializedEntry is serialized PMK cache entry, the content is |
| * opaque for the framework and depends on the native implementation. |
| * @return status Status of the operation |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| */ |
| setPmkCache(vec<uint8_t> serializedEntry) generates (SupplicantStatus status); |
| |
| /** |
| * Set auth alg mask for the network. |
| * |
| * @param authAlgMask value to set. |
| * Combination of |ProtoMask| values. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| */ |
| setAuthAlg_1_3(bitfield<AuthAlgMask> authAlgMask) generates (SupplicantStatus status); |
| |
| /** |
| * Get the auth alg mask set for the network. |
| * |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| * @return authAlgMask Combination of |AuthAlgMask| values. |
| */ |
| getAuthAlg_1_3() generates (SupplicantStatus status, bitfield<AuthAlgMask> authAlgMask); |
| |
| /** |
| * Enable Extensible Authentication (EAP) - Re-authentication Protocol (ERP) for this network. |
| * |
| * @param enable true to set, false otherwise. |
| * @return status Status of the operation. |
| * Possible status codes: |
| * |SupplicantStatusCode.SUCCESS|, |
| * |SupplicantStatusCode.FAILURE_UNKNOWN|, |
| * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| |
| */ |
| setEapErp(bool enable) generates (SupplicantStatus status); |
| }; |