blob: 8a54bf4b82363d60459ef1af7b980fac1c42f093 [file] [log] [blame]
/*
* Copyright 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.wifi.supplicant@1.0;
/**
* Callback Interface exposed by the supplicant service
* for each P2P mode interface (ISupplicantP2pIface).
*
* Clients need to host an instance of this HIDL interface object and
* pass a reference of the object to the supplicant via the
* corresponding |ISupplicantP2pIface.registerCallback| method.
*/
interface ISupplicantP2pIfaceCallback {
/**
* WPS Device Password ID
*/
enum WpsDevPasswordId : uint16_t {
DEFAULT = 0x0000,
USER_SPECIFIED = 0x0001,
MACHINE_SPECIFIED = 0x0002,
REKEY = 0x0003,
PUSHBUTTON = 0x0004,
REGISTRAR_SPECIFIED = 0x0005,
NFC_CONNECTION_HANDOVER = 0x0007,
P2PS_DEFAULT = 0x0008
};
/**
* Status codes for P2P operations.
*/
enum P2pStatusCode : uint32_t {
SUCCESS = 0,
FAIL_INFO_CURRENTLY_UNAVAILABLE = 1,
FAIL_INCOMPATIBLE_PARAMS = 2,
FAIL_LIMIT_REACHED = 3,
FAIL_INVALID_PARAMS = 4,
FAIL_UNABLE_TO_ACCOMMODATE = 5,
FAIL_PREV_PROTOCOL_ERROR = 6,
FAIL_NO_COMMON_CHANNELS = 7,
FAIL_UNKNOWN_GROUP = 8,
FAIL_BOTH_GO_INTENT_15 = 9,
FAIL_INCOMPATIBLE_PROV_METHOD = 10,
FAIL_REJECTED_BY_USER = 11,
SUCCESS_DEFERRED = 12,
};
/**
* Status codes for P2P discovery.
*/
enum P2pProvDiscStatusCode : uint8_t {
SUCCESS = 0,
TIMEOUT = 1,
REJECTED = 2,
TIMEOUT_JOIN = 3,
INFO_UNAVAILABLE = 4
};
/**
* Used to indicate that a new network has been added.
*
* @param id Network ID allocated to the corresponding network.
*/
oneway onNetworkAdded(SupplicantNetworkId id);
/**
* Used to indicate that a network has been removed.
*
* @param id Network ID allocated to the corresponding network.
*/
oneway onNetworkRemoved(SupplicantNetworkId id);
/**
* Used to indicate that a P2P device has been found.
*
* @param srcAddress MAC address of the device found. This must either
* be the P2P device address or the P2P interface address.
* @param p2pDeviceAddress P2P device address.
* @param primaryDeviceType Type of device. Refer to section B.1 of Wifi P2P
* Technical specification v1.2.
* @param deviceName Name of the device.
* @param configMethods Mask of WPS configuration methods supported by the
* device.
* @param deviceCapabilities Refer to section 4.1.4 of Wifi P2P Technical
* specification v1.2.
* @param groupCapabilites Refer to section 4.1.4 of Wifi P2P Technical
* specification v1.2.
* @param wfdDeviceInfo WFD device info as described in section 5.1.2 of WFD
* technical specification v1.0.0.
*/
oneway onDeviceFound(
MacAddress srcAddress, MacAddress p2pDeviceAddress,
uint8_t[8] primaryDeviceType, string deviceName,
bitfield<WpsConfigMethods> configMethods, uint8_t deviceCapabilities,
bitfield<P2pGroupCapabilityMask> groupCapabilities, uint8_t[6] wfdDeviceInfo);
/**
* Used to indicate that a P2P device has been lost.
*
* @param p2pDeviceAddress P2P device address.
*/
oneway onDeviceLost(MacAddress p2pDeviceAddress);
/**
* Used to indicate the termination of P2P find operation.
*/
oneway onFindStopped();
/**
* Used to indicate the reception of a P2P Group Owner negotiation request.
*
* @param srcAddress MAC address of the device that initiated the GO
* negotiation request.
* @param passwordId Type of password.
*/
oneway onGoNegotiationRequest(
MacAddress srcAddress, WpsDevPasswordId passwordId);
/**
* Used to indicate the completion of a P2P Group Owner negotiation request.
*
* @param status Status of the GO negotiation.
*/
oneway onGoNegotiationCompleted(P2pStatusCode status);
/**
* Used to indicate a successful formation of a P2P group.
*/
oneway onGroupFormationSuccess();
/**
* Used to indicate a failure to form a P2P group.
*
* @param failureReason Failure reason string for debug purposes.
*/
oneway onGroupFormationFailure(string failureReason);
/**
* Used to indicate the start of a P2P group.
*
* @param groupIfName Interface name of the group. (For ex: p2p-p2p0-1)
* @param isGo Whether this device is owner of the group.
* @param ssid SSID of the group.
* @param frequency Frequency on which this group is created.
* @param psk PSK used to secure the group.
* @param passphrase PSK passphrase used to secure the group.
* @param goDeviceAddress MAC Address of the owner of this group.
* @param isPersistent Whether this group is persisted or not.
*/
oneway onGroupStarted(
string groupIfname, bool isGo, Ssid ssid, uint32_t frequency,
uint8_t[32] psk, string passphrase, MacAddress goDeviceAddress,
bool isPersistent);
/**
* Used to indicate the removal of a P2P group.
*
* @param groupIfName Interface name of the group. (For ex: p2p-p2p0-1)
* @param isGo Whether this device is owner of the group.
*/
oneway onGroupRemoved(string groupIfname, bool isGo);
/**
* Used to indicate the reception of a P2P invitation.
*
* @param srcAddress MAC address of the device that sent the invitation.
* @param goDeviceAddress MAC Address of the owner of this group.
* @param Bssid Bssid of the group.
* @param persistentNetworkId Persistent network Id of the group.
* @param operatingFrequency Frequency on which the invitation was received.
*/
oneway onInvitationReceived(
MacAddress srcAddress, MacAddress goDeviceAddress, Bssid bssid,
SupplicantNetworkId persistentNetworkId, uint32_t operatingFrequency);
/**
* Used to indicate the result of the P2P invitation request.
*
* @param Bssid Bssid of the group.
* @param status Status of the invitation.
*/
oneway onInvitationResult(Bssid bssid, P2pStatusCode status);
/**
* Used to indicate the completion of a P2P provision discovery request.
*
* @param p2pDeviceAddress P2P device address.
* @param isRequest Whether we received or sent the provision discovery.
* @param status Status of the provision discovery.
* @param configMethods Mask of WPS configuration methods supported.
* @param generatedPin 8 digit pin generated.
*/
oneway onProvisionDiscoveryCompleted(
MacAddress p2pDeviceAddress, bool isRequest, P2pProvDiscStatusCode status,
bitfield<WpsConfigMethods> configMethods, string generatedPin);
/**
* Used to indicate the reception of a P2P service discovery response.
*
* @param srcAddress MAC address of the device that sent the service discovery.
* @param updateIndicator Service update indicator. Refer to section 3.1.3 of
* Wifi P2P Technical specification v1.2.
* @parm tlvs Refer to section 3.1.3.1 of Wifi P2P Technical specification v1.2.
*/
oneway onServiceDiscoveryResponse(
MacAddress srcAddress, uint16_t updateIndicator, vec<uint8_t> tlvs);
/**
* Used to indicate when a STA device is connected to this device.
*
* @param srcAddress MAC address of the device that was authorized.
* @param p2pDeviceAddress P2P device address.
*/
oneway onStaAuthorized(MacAddress srcAddress, MacAddress p2pDeviceAddress);
/**
* Used to indicate when a STA device is disconnected from this device.
*
* @param srcAddress MAC address of the device that was deauthorized.
* @param p2pDeviceAddress P2P device address.
*/
oneway onStaDeauthorized(MacAddress srcAddress, MacAddress p2pDeviceAddress);
};