include/android/bitmap.h - LeafOS-Project/android_frameworks_native - Gitiles

 /*
  * Copyright (C) 2009 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 /**
  * @addtogroup Bitmap
  * @{
  */

 /**
  * @file bitmap.h
  */

 #ifndef ANDROID_BITMAP_H
 #define ANDROID_BITMAP_H

 #include <stdbool.h>
 #include <stdint.h>
 #include <stddef.h>
 #include <jni.h>

 #if !defined(__INTRODUCED_IN)
 #define __INTRODUCED_IN(__api_level) /* nothing */
 #endif

 #ifdef __cplusplus
 extern "C" {
 #endif

 /** AndroidBitmap functions result code. */
 enum {
     /** Operation was successful. */
     ANDROID_BITMAP_RESULT_SUCCESS           = 0,
     /** Bad parameter. */
     ANDROID_BITMAP_RESULT_BAD_PARAMETER     = -1,
     /** JNI exception occured. */
     ANDROID_BITMAP_RESULT_JNI_EXCEPTION     = -2,
     /** Allocation failed. */
     ANDROID_BITMAP_RESULT_ALLOCATION_FAILED = -3,
 };

 /** Backward compatibility: this macro used to be misspelled. */
 #define ANDROID_BITMAP_RESUT_SUCCESS ANDROID_BITMAP_RESULT_SUCCESS

 /** Bitmap pixel format. */
 enum AndroidBitmapFormat {
     /** No format. */
     ANDROID_BITMAP_FORMAT_NONE      = 0,
     /** Red: 8 bits, Green: 8 bits, Blue: 8 bits, Alpha: 8 bits. **/
     ANDROID_BITMAP_FORMAT_RGBA_8888 = 1,
     /** Red: 5 bits, Green: 6 bits, Blue: 5 bits. **/
     ANDROID_BITMAP_FORMAT_RGB_565   = 4,
     /** Deprecated in API level 13. Because of the poor quality of this configuration, it is advised to use ARGB_8888 instead. **/
     ANDROID_BITMAP_FORMAT_RGBA_4444 = 7,
     /** Alpha: 8 bits. */
     ANDROID_BITMAP_FORMAT_A_8       = 8,
     /** Each component is stored as a half float. **/
     ANDROID_BITMAP_FORMAT_RGBA_F16  = 9,
     /** Red: 10 bits, Green: 10 bits, Blue: 10 bits, Alpha: 2 bits. **/
     ANDROID_BITMAP_FORMAT_RGBA_1010102 = 10,
 };

 /** Bitmap alpha format */
 enum {
     /** Pixel components are premultiplied by alpha. */
     ANDROID_BITMAP_FLAGS_ALPHA_PREMUL   = 0,
     /** Pixels are opaque. */
     ANDROID_BITMAP_FLAGS_ALPHA_OPAQUE   = 1,
     /** Pixel components are independent of alpha. */
     ANDROID_BITMAP_FLAGS_ALPHA_UNPREMUL = 2,
     /** Bit mask for AndroidBitmapFormat.flags to isolate the alpha. */
     ANDROID_BITMAP_FLAGS_ALPHA_MASK     = 0x3,
     /** Shift for AndroidBitmapFormat.flags to isolate the alpha. */
     ANDROID_BITMAP_FLAGS_ALPHA_SHIFT    = 0,
 };

 enum {
     /** If this bit is set in AndroidBitmapInfo.flags, the Bitmap uses the
       * HARDWARE Config, and its {@link AHardwareBuffer} can be retrieved via
       * {@link AndroidBitmap_getHardwareBuffer}.
       */
     ANDROID_BITMAP_FLAGS_IS_HARDWARE = 1 << 31,
 };

 /** Bitmap info, see AndroidBitmap_getInfo(). */
 typedef struct {
     /** The bitmap width in pixels. */
     uint32_t    width;
     /** The bitmap height in pixels. */
     uint32_t    height;
     /** The number of byte per row. */
     uint32_t    stride;
     /** The bitmap pixel format. See {@link AndroidBitmapFormat} */
     int32_t     format;
     /** Bitfield containing information about the bitmap.
      *
      * <p>Two bits are used to encode alpha. Use {@link ANDROID_BITMAP_FLAGS_ALPHA_MASK}
      * and {@link ANDROID_BITMAP_FLAGS_ALPHA_SHIFT} to retrieve them.</p>
      *
      * <p>One bit is used to encode whether the Bitmap uses the HARDWARE Config. Use
      * {@link ANDROID_BITMAP_FLAGS_IS_HARDWARE} to know.</p>
      *
      * <p>These flags were introduced in API level 30.</p>
      */
     uint32_t    flags;
 } AndroidBitmapInfo;

 /**
  * Given a java bitmap object, fill out the {@link AndroidBitmapInfo} struct for it.
  * If the call fails, the info parameter will be ignored.
  */
 int AndroidBitmap_getInfo(JNIEnv* env, jobject jbitmap,
                           AndroidBitmapInfo* info);

 /**
  * Given a java bitmap object, return its {@link ADataSpace}.
  *
  * Note that {@link ADataSpace} only exposes a few values. This may return
  * {@link ADATASPACE_UNKNOWN}, even for Named ColorSpaces, if they have no
  * corresponding ADataSpace.
  *
  * Available since API level 30.
  */
 int32_t AndroidBitmap_getDataSpace(JNIEnv* env, jobject jbitmap)  __INTRODUCED_IN(30);

 /**
  * Given a java bitmap object, attempt to lock the pixel address.
  * Locking will ensure that the memory for the pixels will not move
  * until the unlockPixels call, and ensure that, if the pixels had been
  * previously purged, they will have been restored.
  *
  * If this call succeeds, it must be balanced by a call to
  * AndroidBitmap_unlockPixels, after which time the address of the pixels should
  * no longer be used.
  *
  * If this succeeds, *addrPtr will be set to the pixel address. If the call
  * fails, addrPtr will be ignored.
  */
 int AndroidBitmap_lockPixels(JNIEnv* env, jobject jbitmap, void** addrPtr);

 /**
  * Call this to balance a successful call to AndroidBitmap_lockPixels.
  */
 int AndroidBitmap_unlockPixels(JNIEnv* env, jobject jbitmap);

 // Note: these values match android.graphics.Bitmap#compressFormat.

 /**
  *  Specifies the formats that can be compressed to with
  *  {@link AndroidBitmap_compress}.
  */
 enum AndroidBitmapCompressFormat {
     /**
      * Compress to the JPEG format. quality of 0 means
      * compress for the smallest size. 100 means compress for max
      * visual quality.
      */
     ANDROID_BITMAP_COMPRESS_FORMAT_JPEG = 0,
     /**
      * Compress to the PNG format. PNG is lossless, so quality is
      * ignored.
      */
     ANDROID_BITMAP_COMPRESS_FORMAT_PNG = 1,
     /**
      * Compress to the WEBP lossy format. quality of 0 means
      * compress for the smallest size. 100 means compress for max
      * visual quality.
      */
     ANDROID_BITMAP_COMPRESS_FORMAT_WEBP_LOSSY = 3,
     /**
      * Compress to the WEBP lossless format. quality refers to how
      * much effort to put into compression. A value of 0 means to
      * compress quickly, resulting in a relatively large file size.
      * 100 means to spend more time compressing, resulting in a
      * smaller file.
      */
     ANDROID_BITMAP_COMPRESS_FORMAT_WEBP_LOSSLESS = 4,
 };

 /**
  *  User-defined function for writing the output of compression.
  *
  *  Available since API level 30.
  *
  *  @param userContext Pointer to user-defined data passed to
  *         {@link AndroidBitmap_compress}.
  *  @param data Compressed data of `size` bytes to write.
  *  @param size Length in bytes of data to write.
  *  @return Whether the operation succeeded.
  */
 typedef bool (*AndroidBitmap_CompressWriteFunc)(void* userContext,
                                                 const void* data,
                                                 size_t size) __INTRODUCED_IN(30);

 /**
  *  Compress `pixels` as described by `info`.
  *
  *  Available since API level 30.
  *
  *  @param info Description of the pixels to compress.
  *  @param dataspace {@link ADataSpace} describing the color space of the
  *                   pixels.
  *  @param pixels Pointer to pixels to compress.
  *  @param format {@link AndroidBitmapCompressFormat} to compress to.
  *  @param quality Hint to the compressor, 0-100. The value is interpreted
  *                 differently depending on the
  *                 {@link AndroidBitmapCompressFormat}.
  *  @param userContext User-defined data which will be passed to the supplied
  *                     {@link AndroidBitmap_CompressWriteFunc} each time it is
  *                     called. May be null.
  *  @param fn Function that writes the compressed data. Will be called each time
  *            the compressor has compressed more data that is ready to be
  *            written. May be called more than once for each call to this method.
  *            May not be null.
  *  @return AndroidBitmap functions result code.
  */
 int AndroidBitmap_compress(const AndroidBitmapInfo* info,
                            int32_t dataspace,
                            const void* pixels,
                            int32_t format, int32_t quality,
                            void* userContext,
                            AndroidBitmap_CompressWriteFunc fn) __INTRODUCED_IN(30);

 struct AHardwareBuffer;
 typedef struct AHardwareBuffer AHardwareBuffer;

 /**
  *  Retrieve the native object associated with a HARDWARE Bitmap.
  *
  *  Client must not modify it while a Bitmap is wrapping it.
  *
  *  Available since API level 30.
  *
  *  @param env Handle to the JNI environment pointer.
  *  @param bitmap Handle to an android.graphics.Bitmap.
  *  @param outBuffer On success, is set to a pointer to the
  *         {@link AHardwareBuffer} associated with bitmap. This acquires
  *         a reference on the buffer, and the client must call
  *         {@link AHardwareBuffer_release} when finished with it.
  *  @return AndroidBitmap functions result code.
  *          {@link ANDROID_BITMAP_RESULT_BAD_PARAMETER} if bitmap is not a
  *          HARDWARE Bitmap.
  */
 int AndroidBitmap_getHardwareBuffer(JNIEnv* env, jobject bitmap,
         AHardwareBuffer** outBuffer) __INTRODUCED_IN(30);

 #ifdef __cplusplus
 }
 #endif

 #endif

 /** @} */
	/*
	* Copyright (C) 2009 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/**
	* @addtogroup Bitmap
	* @{
	*/

	/**
	* @file bitmap.h
	*/

	#ifndef ANDROID_BITMAP_H
	#define ANDROID_BITMAP_H

	#include <stdbool.h>
	#include <stdint.h>
	#include <stddef.h>
	#include <jni.h>

	#if !defined(__INTRODUCED_IN)
	#define __INTRODUCED_IN(__api_level) /* nothing */
	#endif

	#ifdef __cplusplus
	extern "C" {
	#endif

	/** AndroidBitmap functions result code. */
	enum {
	/** Operation was successful. */
	ANDROID_BITMAP_RESULT_SUCCESS = 0,
	/** Bad parameter. */
	ANDROID_BITMAP_RESULT_BAD_PARAMETER = -1,
	/** JNI exception occured. */
	ANDROID_BITMAP_RESULT_JNI_EXCEPTION = -2,
	/** Allocation failed. */
	ANDROID_BITMAP_RESULT_ALLOCATION_FAILED = -3,
	};

	/** Backward compatibility: this macro used to be misspelled. */
	#define ANDROID_BITMAP_RESUT_SUCCESS ANDROID_BITMAP_RESULT_SUCCESS

	/** Bitmap pixel format. */
	enum AndroidBitmapFormat {
	/** No format. */
	ANDROID_BITMAP_FORMAT_NONE = 0,
	/ Red: 8 bits, Green: 8 bits, Blue: 8 bits, Alpha: 8 bits. /
	ANDROID_BITMAP_FORMAT_RGBA_8888 = 1,
	/ Red: 5 bits, Green: 6 bits, Blue: 5 bits. /
	ANDROID_BITMAP_FORMAT_RGB_565 = 4,
	/ Deprecated in API level 13. Because of the poor quality of this configuration, it is advised to use ARGB_8888 instead. /
	ANDROID_BITMAP_FORMAT_RGBA_4444 = 7,
	/** Alpha: 8 bits. */
	ANDROID_BITMAP_FORMAT_A_8 = 8,
	/ Each component is stored as a half float. /
	ANDROID_BITMAP_FORMAT_RGBA_F16 = 9,
	/ Red: 10 bits, Green: 10 bits, Blue: 10 bits, Alpha: 2 bits. /
	ANDROID_BITMAP_FORMAT_RGBA_1010102 = 10,
	};

	/** Bitmap alpha format */
	enum {
	/** Pixel components are premultiplied by alpha. */
	ANDROID_BITMAP_FLAGS_ALPHA_PREMUL = 0,
	/** Pixels are opaque. */
	ANDROID_BITMAP_FLAGS_ALPHA_OPAQUE = 1,
	/** Pixel components are independent of alpha. */
	ANDROID_BITMAP_FLAGS_ALPHA_UNPREMUL = 2,
	/** Bit mask for AndroidBitmapFormat.flags to isolate the alpha. */
	ANDROID_BITMAP_FLAGS_ALPHA_MASK = 0x3,
	/** Shift for AndroidBitmapFormat.flags to isolate the alpha. */
	ANDROID_BITMAP_FLAGS_ALPHA_SHIFT = 0,
	};

	enum {
	/** If this bit is set in AndroidBitmapInfo.flags, the Bitmap uses the
	* HARDWARE Config, and its {@link AHardwareBuffer} can be retrieved via
	* {@link AndroidBitmap_getHardwareBuffer}.
	*/
	ANDROID_BITMAP_FLAGS_IS_HARDWARE = 1 << 31,
	};

	/** Bitmap info, see AndroidBitmap_getInfo(). */
	typedef struct {
	/** The bitmap width in pixels. */
	uint32_t width;
	/** The bitmap height in pixels. */
	uint32_t height;
	/** The number of byte per row. */
	uint32_t stride;
	/** The bitmap pixel format. See {@link AndroidBitmapFormat} */
	int32_t format;
	/** Bitfield containing information about the bitmap.
	*
	* <p>Two bits are used to encode alpha. Use {@link ANDROID_BITMAP_FLAGS_ALPHA_MASK}
	* and {@link ANDROID_BITMAP_FLAGS_ALPHA_SHIFT} to retrieve them.</p>
	*
	* <p>One bit is used to encode whether the Bitmap uses the HARDWARE Config. Use
	* {@link ANDROID_BITMAP_FLAGS_IS_HARDWARE} to know.</p>
	*
	* <p>These flags were introduced in API level 30.</p>
	*/
	uint32_t flags;
	} AndroidBitmapInfo;

	/**
	* Given a java bitmap object, fill out the {@link AndroidBitmapInfo} struct for it.
	* If the call fails, the info parameter will be ignored.
	*/
	int AndroidBitmap_getInfo(JNIEnv* env, jobject jbitmap,
	AndroidBitmapInfo* info);

	/**
	* Given a java bitmap object, return its {@link ADataSpace}.
	*
	* Note that {@link ADataSpace} only exposes a few values. This may return
	* {@link ADATASPACE_UNKNOWN}, even for Named ColorSpaces, if they have no
	* corresponding ADataSpace.
	*
	* Available since API level 30.
	*/
	int32_t AndroidBitmap_getDataSpace(JNIEnv* env, jobject jbitmap) __INTRODUCED_IN(30);

	/**
	* Given a java bitmap object, attempt to lock the pixel address.
	* Locking will ensure that the memory for the pixels will not move
	* until the unlockPixels call, and ensure that, if the pixels had been
	* previously purged, they will have been restored.
	*
	* If this call succeeds, it must be balanced by a call to
	* AndroidBitmap_unlockPixels, after which time the address of the pixels should
	* no longer be used.
	*
	* If this succeeds, *addrPtr will be set to the pixel address. If the call
	* fails, addrPtr will be ignored.
	*/
	int AndroidBitmap_lockPixels(JNIEnv* env, jobject jbitmap, void** addrPtr);

	/**
	* Call this to balance a successful call to AndroidBitmap_lockPixels.
	*/
	int AndroidBitmap_unlockPixels(JNIEnv* env, jobject jbitmap);

	// Note: these values match android.graphics.Bitmap#compressFormat.

	/**
	* Specifies the formats that can be compressed to with
	* {@link AndroidBitmap_compress}.
	*/
	enum AndroidBitmapCompressFormat {
	/**
	* Compress to the JPEG format. quality of 0 means
	* compress for the smallest size. 100 means compress for max
	* visual quality.
	*/
	ANDROID_BITMAP_COMPRESS_FORMAT_JPEG = 0,
	/**
	* Compress to the PNG format. PNG is lossless, so quality is
	* ignored.
	*/
	ANDROID_BITMAP_COMPRESS_FORMAT_PNG = 1,
	/**
	* Compress to the WEBP lossy format. quality of 0 means
	* compress for the smallest size. 100 means compress for max
	* visual quality.
	*/
	ANDROID_BITMAP_COMPRESS_FORMAT_WEBP_LOSSY = 3,
	/**
	* Compress to the WEBP lossless format. quality refers to how
	* much effort to put into compression. A value of 0 means to
	* compress quickly, resulting in a relatively large file size.
	* 100 means to spend more time compressing, resulting in a
	* smaller file.
	*/
	ANDROID_BITMAP_COMPRESS_FORMAT_WEBP_LOSSLESS = 4,
	};

	/**
	* User-defined function for writing the output of compression.
	*
	* Available since API level 30.
	*
	* @param userContext Pointer to user-defined data passed to
	* {@link AndroidBitmap_compress}.
	* @param data Compressed data of `size` bytes to write.
	* @param size Length in bytes of data to write.
	* @return Whether the operation succeeded.
	*/
	typedef bool (AndroidBitmap_CompressWriteFunc)(void userContext,
	const void* data,
	size_t size) __INTRODUCED_IN(30);

	/**
	* Compress `pixels` as described by `info`.
	*
	* Available since API level 30.
	*
	* @param info Description of the pixels to compress.
	* @param dataspace {@link ADataSpace} describing the color space of the
	* pixels.
	* @param pixels Pointer to pixels to compress.
	* @param format {@link AndroidBitmapCompressFormat} to compress to.
	* @param quality Hint to the compressor, 0-100. The value is interpreted
	* differently depending on the
	* {@link AndroidBitmapCompressFormat}.
	* @param userContext User-defined data which will be passed to the supplied
	* {@link AndroidBitmap_CompressWriteFunc} each time it is
	* called. May be null.
	* @param fn Function that writes the compressed data. Will be called each time
	* the compressor has compressed more data that is ready to be
	* written. May be called more than once for each call to this method.
	* May not be null.
	* @return AndroidBitmap functions result code.
	*/
	int AndroidBitmap_compress(const AndroidBitmapInfo* info,
	int32_t dataspace,
	const void* pixels,
	int32_t format, int32_t quality,
	void* userContext,
	AndroidBitmap_CompressWriteFunc fn) __INTRODUCED_IN(30);

	struct AHardwareBuffer;
	typedef struct AHardwareBuffer AHardwareBuffer;

	/**
	* Retrieve the native object associated with a HARDWARE Bitmap.
	*
	* Client must not modify it while a Bitmap is wrapping it.
	*
	* Available since API level 30.
	*
	* @param env Handle to the JNI environment pointer.
	* @param bitmap Handle to an android.graphics.Bitmap.
	* @param outBuffer On success, is set to a pointer to the
	* {@link AHardwareBuffer} associated with bitmap. This acquires
	* a reference on the buffer, and the client must call
	* {@link AHardwareBuffer_release} when finished with it.
	* @return AndroidBitmap functions result code.
	* {@link ANDROID_BITMAP_RESULT_BAD_PARAMETER} if bitmap is not a
	* HARDWARE Bitmap.
	*/
	int AndroidBitmap_getHardwareBuffer(JNIEnv* env, jobject bitmap,
	AHardwareBuffer** outBuffer) __INTRODUCED_IN(30);

	#ifdef __cplusplus
	}
	#endif

	#endif

	/** @} */