| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <dirent.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <limits.h> |
| #include <poll.h> |
| #include <signal.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string> |
| #include <string.h> |
| #include <sys/capability.h> |
| #include <sys/inotify.h> |
| #include <sys/stat.h> |
| #include <sys/time.h> |
| #include <sys/wait.h> |
| #include <sys/klog.h> |
| #include <time.h> |
| #include <unistd.h> |
| #include <vector> |
| #include <sys/prctl.h> |
| |
| #define LOG_TAG "dumpstate" |
| |
| #include <android-base/file.h> |
| #include <cutils/debugger.h> |
| #include <cutils/log.h> |
| #include <cutils/properties.h> |
| #include <cutils/sockets.h> |
| #include <private/android_filesystem_config.h> |
| |
| #include <selinux/android.h> |
| |
| #include "dumpstate.h" |
| |
| static const int64_t NANOS_PER_SEC = 1000000000; |
| |
| /* list of native processes to include in the native dumps */ |
| // This matches the /proc/pid/exe link instead of /proc/pid/cmdline. |
| static const char* native_processes_to_dump[] = { |
| "/system/bin/audioserver", |
| "/system/bin/cameraserver", |
| "/system/bin/drmserver", |
| "/system/bin/mediacodec", // media.codec |
| "/system/bin/mediadrmserver", |
| "/system/bin/mediaextractor", // media.extractor |
| "/system/bin/mediaserver", |
| "/system/bin/sdcard", |
| "/system/bin/surfaceflinger", |
| "/system/bin/vehicle_network_service", |
| NULL, |
| }; |
| |
| DurationReporter::DurationReporter(const char *title) : DurationReporter(title, stdout) {} |
| |
| DurationReporter::DurationReporter(const char *title, FILE *out) { |
| title_ = title; |
| if (title) { |
| started_ = DurationReporter::nanotime(); |
| } |
| out_ = out; |
| } |
| |
| DurationReporter::~DurationReporter() { |
| if (title_) { |
| uint64_t elapsed = DurationReporter::nanotime() - started_; |
| // Use "Yoda grammar" to make it easier to grep|sort sections. |
| if (out_) { |
| fprintf(out_, "------ %.3fs was the duration of '%s' ------\n", |
| (float) elapsed / NANOS_PER_SEC, title_); |
| } else { |
| MYLOGD("Duration of '%s': %.3fs\n", title_, (float) elapsed / NANOS_PER_SEC); |
| } |
| } |
| } |
| |
| uint64_t DurationReporter::DurationReporter::nanotime() { |
| struct timespec ts; |
| clock_gettime(CLOCK_MONOTONIC, &ts); |
| return (uint64_t) ts.tv_sec * NANOS_PER_SEC + ts.tv_nsec; |
| } |
| |
| void for_each_userid(void (*func)(int), const char *header) { |
| ON_DRY_RUN_RETURN(); |
| DIR *d; |
| struct dirent *de; |
| |
| if (header) printf("\n------ %s ------\n", header); |
| func(0); |
| |
| if (!(d = opendir("/data/system/users"))) { |
| printf("Failed to open /data/system/users (%s)\n", strerror(errno)); |
| return; |
| } |
| |
| while ((de = readdir(d))) { |
| int userid; |
| if (de->d_type != DT_DIR || !(userid = atoi(de->d_name))) { |
| continue; |
| } |
| func(userid); |
| } |
| |
| closedir(d); |
| } |
| |
| static void __for_each_pid(void (*helper)(int, const char *, void *), const char *header, void *arg) { |
| DIR *d; |
| struct dirent *de; |
| |
| if (!(d = opendir("/proc"))) { |
| printf("Failed to open /proc (%s)\n", strerror(errno)); |
| return; |
| } |
| |
| if (header) printf("\n------ %s ------\n", header); |
| while ((de = readdir(d))) { |
| int pid; |
| int fd; |
| char cmdpath[255]; |
| char cmdline[255]; |
| |
| if (!(pid = atoi(de->d_name))) { |
| continue; |
| } |
| |
| memset(cmdline, 0, sizeof(cmdline)); |
| |
| snprintf(cmdpath, sizeof(cmdpath), "/proc/%d/cmdline", pid); |
| if ((fd = TEMP_FAILURE_RETRY(open(cmdpath, O_RDONLY | O_CLOEXEC))) >= 0) { |
| TEMP_FAILURE_RETRY(read(fd, cmdline, sizeof(cmdline) - 2)); |
| close(fd); |
| if (cmdline[0]) { |
| helper(pid, cmdline, arg); |
| continue; |
| } |
| } |
| |
| // if no cmdline, a kernel thread has comm |
| snprintf(cmdpath, sizeof(cmdpath), "/proc/%d/comm", pid); |
| if ((fd = TEMP_FAILURE_RETRY(open(cmdpath, O_RDONLY | O_CLOEXEC))) >= 0) { |
| TEMP_FAILURE_RETRY(read(fd, cmdline + 1, sizeof(cmdline) - 4)); |
| close(fd); |
| if (cmdline[1]) { |
| cmdline[0] = '['; |
| size_t len = strcspn(cmdline, "\f\b\r\n"); |
| cmdline[len] = ']'; |
| cmdline[len+1] = '\0'; |
| } |
| } |
| if (!cmdline[0]) { |
| strcpy(cmdline, "N/A"); |
| } |
| helper(pid, cmdline, arg); |
| } |
| |
| closedir(d); |
| } |
| |
| static void for_each_pid_helper(int pid, const char *cmdline, void *arg) { |
| for_each_pid_func *func = (for_each_pid_func*) arg; |
| func(pid, cmdline); |
| } |
| |
| void for_each_pid(for_each_pid_func func, const char *header) { |
| ON_DRY_RUN_RETURN(); |
| __for_each_pid(for_each_pid_helper, header, (void *) func); |
| } |
| |
| static void for_each_tid_helper(int pid, const char *cmdline, void *arg) { |
| DIR *d; |
| struct dirent *de; |
| char taskpath[255]; |
| for_each_tid_func *func = (for_each_tid_func *) arg; |
| |
| snprintf(taskpath, sizeof(taskpath), "/proc/%d/task", pid); |
| |
| if (!(d = opendir(taskpath))) { |
| printf("Failed to open %s (%s)\n", taskpath, strerror(errno)); |
| return; |
| } |
| |
| func(pid, pid, cmdline); |
| |
| while ((de = readdir(d))) { |
| int tid; |
| int fd; |
| char commpath[255]; |
| char comm[255]; |
| |
| if (!(tid = atoi(de->d_name))) { |
| continue; |
| } |
| |
| if (tid == pid) |
| continue; |
| |
| snprintf(commpath, sizeof(commpath), "/proc/%d/comm", tid); |
| memset(comm, 0, sizeof(comm)); |
| if ((fd = TEMP_FAILURE_RETRY(open(commpath, O_RDONLY | O_CLOEXEC))) < 0) { |
| strcpy(comm, "N/A"); |
| } else { |
| char *c; |
| TEMP_FAILURE_RETRY(read(fd, comm, sizeof(comm) - 2)); |
| close(fd); |
| |
| c = strrchr(comm, '\n'); |
| if (c) { |
| *c = '\0'; |
| } |
| } |
| func(pid, tid, comm); |
| } |
| |
| closedir(d); |
| } |
| |
| void for_each_tid(for_each_tid_func func, const char *header) { |
| ON_DRY_RUN_RETURN(); |
| __for_each_pid(for_each_tid_helper, header, (void *) func); |
| } |
| |
| void show_wchan(int pid, int tid, const char *name) { |
| ON_DRY_RUN_RETURN(); |
| char path[255]; |
| char buffer[255]; |
| int fd, ret, save_errno; |
| char name_buffer[255]; |
| |
| memset(buffer, 0, sizeof(buffer)); |
| |
| snprintf(path, sizeof(path), "/proc/%d/wchan", tid); |
| if ((fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC))) < 0) { |
| printf("Failed to open '%s' (%s)\n", path, strerror(errno)); |
| return; |
| } |
| |
| ret = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); |
| save_errno = errno; |
| close(fd); |
| |
| if (ret < 0) { |
| printf("Failed to read '%s' (%s)\n", path, strerror(save_errno)); |
| return; |
| } |
| |
| snprintf(name_buffer, sizeof(name_buffer), "%*s%s", |
| pid == tid ? 0 : 3, "", name); |
| |
| printf("%-7d %-32s %s\n", tid, name_buffer, buffer); |
| |
| return; |
| } |
| |
| // print time in centiseconds |
| static void snprcent(char *buffer, size_t len, size_t spc, |
| unsigned long long time) { |
| static long hz; // cache discovered hz |
| |
| if (hz <= 0) { |
| hz = sysconf(_SC_CLK_TCK); |
| if (hz <= 0) { |
| hz = 1000; |
| } |
| } |
| |
| // convert to centiseconds |
| time = (time * 100 + (hz / 2)) / hz; |
| |
| char str[16]; |
| |
| snprintf(str, sizeof(str), " %llu.%02u", |
| time / 100, (unsigned)(time % 100)); |
| size_t offset = strlen(buffer); |
| snprintf(buffer + offset, (len > offset) ? len - offset : 0, |
| "%*s", (spc > offset) ? (int)(spc - offset) : 0, str); |
| } |
| |
| // print permille as a percent |
| static void snprdec(char *buffer, size_t len, size_t spc, unsigned permille) { |
| char str[16]; |
| |
| snprintf(str, sizeof(str), " %u.%u%%", permille / 10, permille % 10); |
| size_t offset = strlen(buffer); |
| snprintf(buffer + offset, (len > offset) ? len - offset : 0, |
| "%*s", (spc > offset) ? (int)(spc - offset) : 0, str); |
| } |
| |
| void show_showtime(int pid, const char *name) { |
| ON_DRY_RUN_RETURN(); |
| char path[255]; |
| char buffer[1023]; |
| int fd, ret, save_errno; |
| |
| memset(buffer, 0, sizeof(buffer)); |
| |
| snprintf(path, sizeof(path), "/proc/%d/stat", pid); |
| if ((fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC))) < 0) { |
| printf("Failed to open '%s' (%s)\n", path, strerror(errno)); |
| return; |
| } |
| |
| ret = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); |
| save_errno = errno; |
| close(fd); |
| |
| if (ret < 0) { |
| printf("Failed to read '%s' (%s)\n", path, strerror(save_errno)); |
| return; |
| } |
| |
| // field 14 is utime |
| // field 15 is stime |
| // field 42 is iotime |
| unsigned long long utime = 0, stime = 0, iotime = 0; |
| if (sscanf(buffer, |
| "%*u %*s %*s %*d %*d %*d %*d %*d %*d %*d %*d " |
| "%*d %*d %llu %llu %*d %*d %*d %*d %*d %*d " |
| "%*d %*d %*d %*d %*d %*d %*d %*d %*d %*d " |
| "%*d %*d %*d %*d %*d %*d %*d %*d %*d %llu ", |
| &utime, &stime, &iotime) != 3) { |
| return; |
| } |
| |
| unsigned long long total = utime + stime; |
| if (!total) { |
| return; |
| } |
| |
| unsigned permille = (iotime * 1000 + (total / 2)) / total; |
| if (permille > 1000) { |
| permille = 1000; |
| } |
| |
| // try to beautify and stabilize columns at <80 characters |
| snprintf(buffer, sizeof(buffer), "%-6d%s", pid, name); |
| if ((name[0] != '[') || utime) { |
| snprcent(buffer, sizeof(buffer), 57, utime); |
| } |
| snprcent(buffer, sizeof(buffer), 65, stime); |
| if ((name[0] != '[') || iotime) { |
| snprcent(buffer, sizeof(buffer), 73, iotime); |
| } |
| if (iotime) { |
| snprdec(buffer, sizeof(buffer), 79, permille); |
| } |
| puts(buffer); // adds a trailing newline |
| |
| return; |
| } |
| |
| void do_dmesg() { |
| const char *title = "KERNEL LOG (dmesg)"; |
| DurationReporter duration_reporter(title); |
| printf("------ %s ------\n", title); |
| |
| ON_DRY_RUN_RETURN(); |
| /* Get size of kernel buffer */ |
| int size = klogctl(KLOG_SIZE_BUFFER, NULL, 0); |
| if (size <= 0) { |
| printf("Unexpected klogctl return value: %d\n\n", size); |
| return; |
| } |
| char *buf = (char *) malloc(size + 1); |
| if (buf == NULL) { |
| printf("memory allocation failed\n\n"); |
| return; |
| } |
| int retval = klogctl(KLOG_READ_ALL, buf, size); |
| if (retval < 0) { |
| printf("klogctl failure\n\n"); |
| free(buf); |
| return; |
| } |
| buf[retval] = '\0'; |
| printf("%s\n\n", buf); |
| free(buf); |
| return; |
| } |
| |
| void do_showmap(int pid, const char *name) { |
| char title[255]; |
| char arg[255]; |
| |
| snprintf(title, sizeof(title), "SHOW MAP %d (%s)", pid, name); |
| snprintf(arg, sizeof(arg), "%d", pid); |
| run_command(title, 10, SU_PATH, "root", "showmap", "-q", arg, NULL); |
| } |
| |
| static int _dump_file_from_fd(const char *title, const char *path, int fd) { |
| if (title) { |
| printf("------ %s (%s", title, path); |
| |
| struct stat st; |
| // Only show the modification time of non-device files. |
| size_t path_len = strlen(path); |
| if ((path_len < 6 || memcmp(path, "/proc/", 6)) && |
| (path_len < 5 || memcmp(path, "/sys/", 5)) && |
| (path_len < 3 || memcmp(path, "/d/", 3)) && |
| !fstat(fd, &st)) { |
| char stamp[80]; |
| time_t mtime = st.st_mtime; |
| strftime(stamp, sizeof(stamp), "%Y-%m-%d %H:%M:%S", localtime(&mtime)); |
| printf(": %s", stamp); |
| } |
| printf(") ------\n"); |
| } |
| ON_DRY_RUN({ update_progress(WEIGHT_FILE); close(fd); return 0; }); |
| |
| bool newline = false; |
| fd_set read_set; |
| struct timeval tm; |
| while (1) { |
| FD_ZERO(&read_set); |
| FD_SET(fd, &read_set); |
| /* Timeout if no data is read for 30 seconds. */ |
| tm.tv_sec = 30; |
| tm.tv_usec = 0; |
| uint64_t elapsed = DurationReporter::nanotime(); |
| int ret = TEMP_FAILURE_RETRY(select(fd + 1, &read_set, NULL, NULL, &tm)); |
| if (ret == -1) { |
| printf("*** %s: select failed: %s\n", path, strerror(errno)); |
| newline = true; |
| break; |
| } else if (ret == 0) { |
| elapsed = DurationReporter::nanotime() - elapsed; |
| printf("*** %s: Timed out after %.3fs\n", path, |
| (float) elapsed / NANOS_PER_SEC); |
| newline = true; |
| break; |
| } else { |
| char buffer[65536]; |
| ssize_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); |
| if (bytes_read > 0) { |
| fwrite(buffer, bytes_read, 1, stdout); |
| newline = (buffer[bytes_read-1] == '\n'); |
| } else { |
| if (bytes_read == -1) { |
| printf("*** %s: Failed to read from fd: %s", path, strerror(errno)); |
| newline = true; |
| } |
| break; |
| } |
| } |
| } |
| update_progress(WEIGHT_FILE); |
| close(fd); |
| |
| if (!newline) printf("\n"); |
| if (title) printf("\n"); |
| return 0; |
| } |
| |
| /* prints the contents of a file */ |
| int dump_file(const char *title, const char *path) { |
| DurationReporter duration_reporter(title); |
| int fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); |
| if (fd < 0) { |
| int err = errno; |
| printf("*** %s: %s\n", path, strerror(err)); |
| if (title) printf("\n"); |
| return -1; |
| } |
| return _dump_file_from_fd(title, path, fd); |
| } |
| |
| int read_file_as_long(const char *path, long int *output) { |
| int fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); |
| if (fd < 0) { |
| int err = errno; |
| MYLOGE("Error opening file descriptor for %s: %s\n", path, strerror(err)); |
| return -1; |
| } |
| char buffer[50]; |
| ssize_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); |
| if (bytes_read == -1) { |
| MYLOGE("Error reading file %s: %s\n", path, strerror(errno)); |
| return -2; |
| } |
| if (bytes_read == 0) { |
| MYLOGE("File %s is empty\n", path); |
| return -3; |
| } |
| *output = atoi(buffer); |
| return 0; |
| } |
| |
| /* calls skip to gate calling dump_from_fd recursively |
| * in the specified directory. dump_from_fd defaults to |
| * dump_file_from_fd above when set to NULL. skip defaults |
| * to false when set to NULL. dump_from_fd will always be |
| * called with title NULL. |
| */ |
| int dump_files(const char *title, const char *dir, |
| bool (*skip)(const char *path), |
| int (*dump_from_fd)(const char *title, const char *path, int fd)) { |
| DurationReporter duration_reporter(title); |
| DIR *dirp; |
| struct dirent *d; |
| char *newpath = NULL; |
| const char *slash = "/"; |
| int fd, retval = 0; |
| |
| if (title) { |
| printf("------ %s (%s) ------\n", title, dir); |
| } |
| ON_DRY_RUN_RETURN(0); |
| |
| if (dir[strlen(dir) - 1] == '/') { |
| ++slash; |
| } |
| dirp = opendir(dir); |
| if (dirp == NULL) { |
| retval = -errno; |
| MYLOGE("%s: %s\n", dir, strerror(errno)); |
| return retval; |
| } |
| |
| if (!dump_from_fd) { |
| dump_from_fd = dump_file_from_fd; |
| } |
| for (; ((d = readdir(dirp))); free(newpath), newpath = NULL) { |
| if ((d->d_name[0] == '.') |
| && (((d->d_name[1] == '.') && (d->d_name[2] == '\0')) |
| || (d->d_name[1] == '\0'))) { |
| continue; |
| } |
| asprintf(&newpath, "%s%s%s%s", dir, slash, d->d_name, |
| (d->d_type == DT_DIR) ? "/" : ""); |
| if (!newpath) { |
| retval = -errno; |
| continue; |
| } |
| if (skip && (*skip)(newpath)) { |
| continue; |
| } |
| if (d->d_type == DT_DIR) { |
| int ret = dump_files(NULL, newpath, skip, dump_from_fd); |
| if (ret < 0) { |
| retval = ret; |
| } |
| continue; |
| } |
| fd = TEMP_FAILURE_RETRY(open(newpath, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); |
| if (fd < 0) { |
| retval = fd; |
| printf("*** %s: %s\n", newpath, strerror(errno)); |
| continue; |
| } |
| (*dump_from_fd)(NULL, newpath, fd); |
| } |
| closedir(dirp); |
| if (title) { |
| printf("\n"); |
| } |
| return retval; |
| } |
| |
| /* fd must have been opened with the flag O_NONBLOCK. With this flag set, |
| * it's possible to avoid issues where opening the file itself can get |
| * stuck. |
| */ |
| int dump_file_from_fd(const char *title, const char *path, int fd) { |
| ON_DRY_RUN_RETURN(0); |
| int flags = fcntl(fd, F_GETFL); |
| if (flags == -1) { |
| printf("*** %s: failed to get flags on fd %d: %s\n", path, fd, strerror(errno)); |
| close(fd); |
| return -1; |
| } else if (!(flags & O_NONBLOCK)) { |
| printf("*** %s: fd must have O_NONBLOCK set.\n", path); |
| close(fd); |
| return -1; |
| } |
| return _dump_file_from_fd(title, path, fd); |
| } |
| |
| bool waitpid_with_timeout(pid_t pid, int timeout_seconds, int* status) { |
| sigset_t child_mask, old_mask; |
| sigemptyset(&child_mask); |
| sigaddset(&child_mask, SIGCHLD); |
| |
| if (sigprocmask(SIG_BLOCK, &child_mask, &old_mask) == -1) { |
| printf("*** sigprocmask failed: %s\n", strerror(errno)); |
| return false; |
| } |
| |
| struct timespec ts; |
| ts.tv_sec = timeout_seconds; |
| ts.tv_nsec = 0; |
| int ret = TEMP_FAILURE_RETRY(sigtimedwait(&child_mask, NULL, &ts)); |
| int saved_errno = errno; |
| // Set the signals back the way they were. |
| if (sigprocmask(SIG_SETMASK, &old_mask, NULL) == -1) { |
| printf("*** sigprocmask failed: %s\n", strerror(errno)); |
| if (ret == 0) { |
| return false; |
| } |
| } |
| if (ret == -1) { |
| errno = saved_errno; |
| if (errno == EAGAIN) { |
| errno = ETIMEDOUT; |
| } else { |
| printf("*** sigtimedwait failed: %s\n", strerror(errno)); |
| } |
| return false; |
| } |
| |
| pid_t child_pid = waitpid(pid, status, WNOHANG); |
| if (child_pid != pid) { |
| if (child_pid != -1) { |
| printf("*** Waiting for pid %d, got pid %d instead\n", pid, child_pid); |
| } else { |
| printf("*** waitpid failed: %s\n", strerror(errno)); |
| } |
| return false; |
| } |
| return true; |
| } |
| |
| // TODO: refactor all those commands that convert args |
| void format_args(const char* command, const char *args[], std::string *string); |
| |
| int run_command(const char *title, int timeout_seconds, const char *command, ...) { |
| DurationReporter duration_reporter(title); |
| fflush(stdout); |
| |
| const char *args[1024] = {command}; |
| size_t arg; |
| va_list ap; |
| va_start(ap, command); |
| if (title) printf("------ %s (%s", title, command); |
| bool null_terminated = false; |
| for (arg = 1; arg < sizeof(args) / sizeof(args[0]); ++arg) { |
| args[arg] = va_arg(ap, const char *); |
| if (args[arg] == nullptr) { |
| null_terminated = true; |
| break; |
| } |
| // TODO: null_terminated check is not really working; line below would crash dumpstate if |
| // nullptr is missing |
| if (title) printf(" %s", args[arg]); |
| } |
| if (title) printf(") ------\n"); |
| fflush(stdout); |
| if (!null_terminated) { |
| // Fail now, otherwise execvp() call on run_command_always() might hang. |
| std::string cmd; |
| format_args(command, args, &cmd); |
| MYLOGE("skipping command %s because its args were not NULL-terminated", cmd.c_str()); |
| return -1; |
| } |
| |
| ON_DRY_RUN({ update_progress(timeout_seconds); va_end(ap); return 0; }); |
| |
| int status = run_command_always(title, DONT_DROP_ROOT, NORMAL_STDOUT, timeout_seconds, args); |
| va_end(ap); |
| return status; |
| } |
| |
| int run_command_as_shell(const char *title, int timeout_seconds, const char *command, ...) { |
| DurationReporter duration_reporter(title); |
| fflush(stdout); |
| |
| const char *args[1024] = {command}; |
| size_t arg; |
| va_list ap; |
| va_start(ap, command); |
| if (title) printf("------ %s (%s", title, command); |
| bool null_terminated = false; |
| for (arg = 1; arg < sizeof(args) / sizeof(args[0]); ++arg) { |
| args[arg] = va_arg(ap, const char *); |
| if (args[arg] == nullptr) { |
| null_terminated = true; |
| break; |
| } |
| // TODO: null_terminated check is not really working; line below would crash dumpstate if |
| // nullptr is missing |
| if (title) printf(" %s", args[arg]); |
| } |
| if (title) printf(") ------\n"); |
| fflush(stdout); |
| if (!null_terminated) { |
| // Fail now, otherwise execvp() call on run_command_always() might hang. |
| std::string cmd; |
| format_args(command, args, &cmd); |
| MYLOGE("skipping command %s because its args were not NULL-terminated", cmd.c_str()); |
| return -1; |
| } |
| |
| ON_DRY_RUN({ update_progress(timeout_seconds); va_end(ap); return 0; }); |
| |
| int status = run_command_always(title, DROP_ROOT, NORMAL_STDOUT, timeout_seconds, args); |
| va_end(ap); |
| return status; |
| } |
| |
| /* forks a command and waits for it to finish */ |
| int run_command_always(const char *title, RootMode root_mode, StdoutMode stdout_mode, |
| int timeout_seconds, const char *args[]) { |
| bool silent = (stdout_mode == REDIRECT_TO_STDERR); |
| // TODO: need to check if args is null-terminated, otherwise execvp will crash dumpstate |
| |
| /* TODO: for now we're simplifying the progress calculation by using the timeout as the weight. |
| * It's a good approximation for most cases, except when calling dumpsys, where its weight |
| * should be much higher proportionally to its timeout. */ |
| int weight = timeout_seconds; |
| |
| const char *command = args[0]; |
| uint64_t start = DurationReporter::nanotime(); |
| pid_t pid = fork(); |
| |
| /* handle error case */ |
| if (pid < 0) { |
| if (!silent) printf("*** fork: %s\n", strerror(errno)); |
| MYLOGE("*** fork: %s\n", strerror(errno)); |
| return pid; |
| } |
| |
| /* handle child case */ |
| if (pid == 0) { |
| if (root_mode == DROP_ROOT && !drop_root_user()) { |
| if (!silent) printf("*** fail todrop root before running %s: %s\n", command, |
| strerror(errno)); |
| MYLOGE("*** could not drop root before running %s: %s\n", command, strerror(errno)); |
| return -1; |
| } |
| |
| if (silent) { |
| // Redirect stderr to stdout |
| dup2(STDERR_FILENO, STDOUT_FILENO); |
| } |
| |
| /* make sure the child dies when dumpstate dies */ |
| prctl(PR_SET_PDEATHSIG, SIGKILL); |
| |
| /* just ignore SIGPIPE, will go down with parent's */ |
| struct sigaction sigact; |
| memset(&sigact, 0, sizeof(sigact)); |
| sigact.sa_handler = SIG_IGN; |
| sigaction(SIGPIPE, &sigact, NULL); |
| |
| execvp(command, (char**) args); |
| // execvp's result will be handled after waitpid_with_timeout() below, but if it failed, |
| // it's safer to exit dumpstate. |
| MYLOGD("execvp on command '%s' failed (error: %s)", command, strerror(errno)); |
| fflush(stdout); |
| // Must call _exit (instead of exit), otherwise it will corrupt the zip file. |
| _exit(EXIT_FAILURE); |
| } |
| |
| /* handle parent case */ |
| int status; |
| bool ret = waitpid_with_timeout(pid, timeout_seconds, &status); |
| uint64_t elapsed = DurationReporter::nanotime() - start; |
| std::string cmd; // used to log command and its args |
| if (!ret) { |
| if (errno == ETIMEDOUT) { |
| format_args(command, args, &cmd); |
| if (!silent) printf("*** command '%s' timed out after %.3fs (killing pid %d)\n", |
| cmd.c_str(), (float) elapsed / NANOS_PER_SEC, pid); |
| MYLOGE("command '%s' timed out after %.3fs (killing pid %d)\n", cmd.c_str(), |
| (float) elapsed / NANOS_PER_SEC, pid); |
| } else { |
| format_args(command, args, &cmd); |
| if (!silent) printf("*** command '%s': Error after %.4fs (killing pid %d)\n", |
| cmd.c_str(), (float) elapsed / NANOS_PER_SEC, pid); |
| MYLOGE("command '%s': Error after %.4fs (killing pid %d)\n", cmd.c_str(), |
| (float) elapsed / NANOS_PER_SEC, pid); |
| } |
| kill(pid, SIGTERM); |
| if (!waitpid_with_timeout(pid, 5, NULL)) { |
| kill(pid, SIGKILL); |
| if (!waitpid_with_timeout(pid, 5, NULL)) { |
| if (!silent) printf("could not kill command '%s' (pid %d) even with SIGKILL.\n", |
| command, pid); |
| MYLOGE("could not kill command '%s' (pid %d) even with SIGKILL.\n", command, pid); |
| } |
| } |
| return -1; |
| } else if (status) { |
| format_args(command, args, &cmd); |
| if (!silent) printf("*** command '%s' failed: %s\n", cmd.c_str(), strerror(errno)); |
| MYLOGE("command '%s' failed: %s\n", cmd.c_str(), strerror(errno)); |
| return -2; |
| } |
| |
| if (WIFSIGNALED(status)) { |
| if (!silent) printf("*** %s: Killed by signal %d\n", command, WTERMSIG(status)); |
| MYLOGE("*** %s: Killed by signal %d\n", command, WTERMSIG(status)); |
| } else if (WIFEXITED(status) && WEXITSTATUS(status) > 0) { |
| if (!silent) printf("*** %s: Exit code %d\n", command, WEXITSTATUS(status)); |
| MYLOGE("*** %s: Exit code %d\n", command, WEXITSTATUS(status)); |
| } |
| |
| if (weight > 0) { |
| update_progress(weight); |
| } |
| return status; |
| } |
| |
| bool drop_root_user() { |
| if (getgid() == AID_SHELL && getuid() == AID_SHELL) { |
| MYLOGD("drop_root_user(): already running as Shell"); |
| return true; |
| } |
| /* ensure we will keep capabilities when we drop root */ |
| if (prctl(PR_SET_KEEPCAPS, 1) < 0) { |
| MYLOGE("prctl(PR_SET_KEEPCAPS) failed: %s\n", strerror(errno)); |
| return false; |
| } |
| |
| gid_t groups[] = { AID_LOG, AID_SDCARD_R, AID_SDCARD_RW, |
| AID_MOUNT, AID_INET, AID_NET_BW_STATS, AID_READPROC, AID_WAKELOCK, |
| AID_BLUETOOTH }; |
| if (setgroups(sizeof(groups)/sizeof(groups[0]), groups) != 0) { |
| MYLOGE("Unable to setgroups, aborting: %s\n", strerror(errno)); |
| return false; |
| } |
| if (setgid(AID_SHELL) != 0) { |
| MYLOGE("Unable to setgid, aborting: %s\n", strerror(errno)); |
| return false; |
| } |
| if (setuid(AID_SHELL) != 0) { |
| MYLOGE("Unable to setuid, aborting: %s\n", strerror(errno)); |
| return false; |
| } |
| |
| struct __user_cap_header_struct capheader; |
| struct __user_cap_data_struct capdata[2]; |
| memset(&capheader, 0, sizeof(capheader)); |
| memset(&capdata, 0, sizeof(capdata)); |
| capheader.version = _LINUX_CAPABILITY_VERSION_3; |
| capheader.pid = 0; |
| |
| capdata[CAP_TO_INDEX(CAP_SYSLOG)].permitted = |
| (CAP_TO_MASK(CAP_SYSLOG) | CAP_TO_MASK(CAP_BLOCK_SUSPEND)); |
| capdata[CAP_TO_INDEX(CAP_SYSLOG)].effective = |
| (CAP_TO_MASK(CAP_SYSLOG) | CAP_TO_MASK(CAP_BLOCK_SUSPEND)); |
| capdata[0].inheritable = 0; |
| capdata[1].inheritable = 0; |
| |
| if (capset(&capheader, &capdata[0]) < 0) { |
| MYLOGE("capset failed: %s\n", strerror(errno)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void send_broadcast(const std::string& action, const std::vector<std::string>& args) { |
| if (args.size() > 1000) { |
| MYLOGE("send_broadcast: too many arguments (%d)\n", (int) args.size()); |
| return; |
| } |
| const char *am_args[1024] = { "/system/bin/am", "broadcast", "--user", "0", "-a", |
| action.c_str() }; |
| size_t am_index = 5; // Starts at the index of last initial value above. |
| for (const std::string& arg : args) { |
| am_args[++am_index] = arg.c_str(); |
| } |
| // Always terminate with NULL. |
| am_args[am_index + 1] = NULL; |
| std::string args_string; |
| format_args(am_index + 1, am_args, &args_string); |
| MYLOGD("send_broadcast command: %s\n", args_string.c_str()); |
| run_command_always(NULL, DROP_ROOT, REDIRECT_TO_STDERR, 20, am_args); |
| } |
| |
| size_t num_props = 0; |
| static char* props[2000]; |
| |
| static void print_prop(const char *key, const char *name, void *user) { |
| (void) user; |
| if (num_props < sizeof(props) / sizeof(props[0])) { |
| char buf[PROPERTY_KEY_MAX + PROPERTY_VALUE_MAX + 10]; |
| snprintf(buf, sizeof(buf), "[%s]: [%s]\n", key, name); |
| props[num_props++] = strdup(buf); |
| } |
| } |
| |
| static int compare_prop(const void *a, const void *b) { |
| return strcmp(*(char * const *) a, *(char * const *) b); |
| } |
| |
| /* prints all the system properties */ |
| void print_properties() { |
| const char* title = "SYSTEM PROPERTIES"; |
| DurationReporter duration_reporter(title); |
| printf("------ %s ------\n", title); |
| ON_DRY_RUN_RETURN(); |
| size_t i; |
| num_props = 0; |
| property_list(print_prop, NULL); |
| qsort(&props, num_props, sizeof(props[0]), compare_prop); |
| |
| for (i = 0; i < num_props; ++i) { |
| fputs(props[i], stdout); |
| free(props[i]); |
| } |
| printf("\n"); |
| } |
| |
| int open_socket(const char *service) { |
| int s = android_get_control_socket(service); |
| if (s < 0) { |
| MYLOGE("android_get_control_socket(%s): %s\n", service, strerror(errno)); |
| exit(1); |
| } |
| fcntl(s, F_SETFD, FD_CLOEXEC); |
| if (listen(s, 4) < 0) { |
| MYLOGE("listen(control socket): %s\n", strerror(errno)); |
| exit(1); |
| } |
| |
| struct sockaddr addr; |
| socklen_t alen = sizeof(addr); |
| int fd = accept(s, &addr, &alen); |
| if (fd < 0) { |
| MYLOGE("accept(control socket): %s\n", strerror(errno)); |
| exit(1); |
| } |
| |
| return fd; |
| } |
| |
| /* redirect output to a service control socket */ |
| void redirect_to_socket(FILE *redirect, const char *service) { |
| int fd = open_socket(service); |
| fflush(redirect); |
| dup2(fd, fileno(redirect)); |
| close(fd); |
| } |
| |
| // TODO: should call is_valid_output_file and/or be merged into it. |
| void create_parent_dirs(const char *path) { |
| char *chp = const_cast<char *> (path); |
| |
| /* skip initial slash */ |
| if (chp[0] == '/') |
| chp++; |
| |
| /* create leading directories, if necessary */ |
| struct stat dir_stat; |
| while (chp && chp[0]) { |
| chp = strchr(chp, '/'); |
| if (chp) { |
| *chp = 0; |
| if (stat(path, &dir_stat) == -1 || !S_ISDIR(dir_stat.st_mode)) { |
| MYLOGI("Creating directory %s\n", path); |
| if (mkdir(path, 0770)) { /* drwxrwx--- */ |
| MYLOGE("Unable to create directory %s: %s\n", path, strerror(errno)); |
| } else if (chown(path, AID_SHELL, AID_SHELL)) { |
| MYLOGE("Unable to change ownership of dir %s: %s\n", path, strerror(errno)); |
| } |
| } |
| *chp++ = '/'; |
| } |
| } |
| } |
| |
| /* redirect output to a file */ |
| void redirect_to_file(FILE *redirect, char *path) { |
| create_parent_dirs(path); |
| |
| int fd = TEMP_FAILURE_RETRY(open(path, O_WRONLY | O_CREAT | O_TRUNC | O_CLOEXEC | O_NOFOLLOW, |
| S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)); |
| if (fd < 0) { |
| MYLOGE("%s: %s\n", path, strerror(errno)); |
| exit(1); |
| } |
| |
| TEMP_FAILURE_RETRY(dup2(fd, fileno(redirect))); |
| close(fd); |
| } |
| |
| static bool should_dump_native_traces(const char* path) { |
| for (const char** p = native_processes_to_dump; *p; p++) { |
| if (!strcmp(*p, path)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* dump Dalvik and native stack traces, return the trace file location (NULL if none) */ |
| const char *dump_traces() { |
| DurationReporter duration_reporter("DUMP TRACES", NULL); |
| ON_DRY_RUN_RETURN(NULL); |
| const char* result = NULL; |
| |
| char traces_path[PROPERTY_VALUE_MAX] = ""; |
| property_get("dalvik.vm.stack-trace-file", traces_path, ""); |
| if (!traces_path[0]) return NULL; |
| |
| /* move the old traces.txt (if any) out of the way temporarily */ |
| char anr_traces_path[PATH_MAX]; |
| strlcpy(anr_traces_path, traces_path, sizeof(anr_traces_path)); |
| strlcat(anr_traces_path, ".anr", sizeof(anr_traces_path)); |
| if (rename(traces_path, anr_traces_path) && errno != ENOENT) { |
| MYLOGE("rename(%s, %s): %s\n", traces_path, anr_traces_path, strerror(errno)); |
| return NULL; // Can't rename old traces.txt -- no permission? -- leave it alone instead |
| } |
| |
| /* create a new, empty traces.txt file to receive stack dumps */ |
| int fd = TEMP_FAILURE_RETRY(open(traces_path, O_CREAT | O_WRONLY | O_TRUNC | O_NOFOLLOW | O_CLOEXEC, |
| 0666)); /* -rw-rw-rw- */ |
| if (fd < 0) { |
| MYLOGE("%s: %s\n", traces_path, strerror(errno)); |
| return NULL; |
| } |
| int chmod_ret = fchmod(fd, 0666); |
| if (chmod_ret < 0) { |
| MYLOGE("fchmod on %s failed: %s\n", traces_path, strerror(errno)); |
| close(fd); |
| return NULL; |
| } |
| |
| /* Variables below must be initialized before 'goto' statements */ |
| int dalvik_found = 0; |
| int ifd, wfd = -1; |
| |
| /* walk /proc and kill -QUIT all Dalvik processes */ |
| DIR *proc = opendir("/proc"); |
| if (proc == NULL) { |
| MYLOGE("/proc: %s\n", strerror(errno)); |
| goto error_close_fd; |
| } |
| |
| /* use inotify to find when processes are done dumping */ |
| ifd = inotify_init(); |
| if (ifd < 0) { |
| MYLOGE("inotify_init: %s\n", strerror(errno)); |
| goto error_close_fd; |
| } |
| |
| wfd = inotify_add_watch(ifd, traces_path, IN_CLOSE_WRITE); |
| if (wfd < 0) { |
| MYLOGE("inotify_add_watch(%s): %s\n", traces_path, strerror(errno)); |
| goto error_close_ifd; |
| } |
| |
| struct dirent *d; |
| while ((d = readdir(proc))) { |
| int pid = atoi(d->d_name); |
| if (pid <= 0) continue; |
| |
| char path[PATH_MAX]; |
| char data[PATH_MAX]; |
| snprintf(path, sizeof(path), "/proc/%d/exe", pid); |
| ssize_t len = readlink(path, data, sizeof(data) - 1); |
| if (len <= 0) { |
| continue; |
| } |
| data[len] = '\0'; |
| |
| if (!strncmp(data, "/system/bin/app_process", strlen("/system/bin/app_process"))) { |
| /* skip zygote -- it won't dump its stack anyway */ |
| snprintf(path, sizeof(path), "/proc/%d/cmdline", pid); |
| int cfd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC)); |
| len = read(cfd, data, sizeof(data) - 1); |
| close(cfd); |
| if (len <= 0) { |
| continue; |
| } |
| data[len] = '\0'; |
| if (!strncmp(data, "zygote", strlen("zygote"))) { |
| continue; |
| } |
| |
| ++dalvik_found; |
| uint64_t start = DurationReporter::nanotime(); |
| if (kill(pid, SIGQUIT)) { |
| MYLOGE("kill(%d, SIGQUIT): %s\n", pid, strerror(errno)); |
| continue; |
| } |
| |
| /* wait for the writable-close notification from inotify */ |
| struct pollfd pfd = { ifd, POLLIN, 0 }; |
| int ret = poll(&pfd, 1, 5000); /* 5 sec timeout */ |
| if (ret < 0) { |
| MYLOGE("poll: %s\n", strerror(errno)); |
| } else if (ret == 0) { |
| MYLOGE("warning: timed out dumping pid %d\n", pid); |
| } else { |
| struct inotify_event ie; |
| read(ifd, &ie, sizeof(ie)); |
| } |
| |
| if (lseek(fd, 0, SEEK_END) < 0) { |
| MYLOGE("lseek: %s\n", strerror(errno)); |
| } else { |
| dprintf(fd, "[dump dalvik stack %d: %.3fs elapsed]\n", |
| pid, (float)(DurationReporter::nanotime() - start) / NANOS_PER_SEC); |
| } |
| } else if (should_dump_native_traces(data)) { |
| /* dump native process if appropriate */ |
| if (lseek(fd, 0, SEEK_END) < 0) { |
| MYLOGE("lseek: %s\n", strerror(errno)); |
| } else { |
| static uint16_t timeout_failures = 0; |
| uint64_t start = DurationReporter::nanotime(); |
| |
| /* If 3 backtrace dumps fail in a row, consider debuggerd dead. */ |
| if (timeout_failures == 3) { |
| dprintf(fd, "too many stack dump failures, skipping...\n"); |
| } else if (dump_backtrace_to_file_timeout(pid, fd, 20) == -1) { |
| dprintf(fd, "dumping failed, likely due to a timeout\n"); |
| timeout_failures++; |
| } else { |
| timeout_failures = 0; |
| } |
| dprintf(fd, "[dump native stack %d: %.3fs elapsed]\n", |
| pid, (float)(DurationReporter::nanotime() - start) / NANOS_PER_SEC); |
| } |
| } |
| } |
| |
| if (dalvik_found == 0) { |
| MYLOGE("Warning: no Dalvik processes found to dump stacks\n"); |
| } |
| |
| static char dump_traces_path[PATH_MAX]; |
| strlcpy(dump_traces_path, traces_path, sizeof(dump_traces_path)); |
| strlcat(dump_traces_path, ".bugreport", sizeof(dump_traces_path)); |
| if (rename(traces_path, dump_traces_path)) { |
| MYLOGE("rename(%s, %s): %s\n", traces_path, dump_traces_path, strerror(errno)); |
| goto error_close_ifd; |
| } |
| result = dump_traces_path; |
| |
| /* replace the saved [ANR] traces.txt file */ |
| rename(anr_traces_path, traces_path); |
| |
| error_close_ifd: |
| close(ifd); |
| error_close_fd: |
| close(fd); |
| return result; |
| } |
| |
| void dump_route_tables() { |
| DurationReporter duration_reporter("DUMP ROUTE TABLES"); |
| ON_DRY_RUN_RETURN(); |
| const char* const RT_TABLES_PATH = "/data/misc/net/rt_tables"; |
| dump_file("RT_TABLES", RT_TABLES_PATH); |
| FILE* fp = fopen(RT_TABLES_PATH, "re"); |
| if (!fp) { |
| printf("*** %s: %s\n", RT_TABLES_PATH, strerror(errno)); |
| return; |
| } |
| char table[16]; |
| // Each line has an integer (the table number), a space, and a string (the table name). We only |
| // need the table number. It's a 32-bit unsigned number, so max 10 chars. Skip the table name. |
| // Add a fixed max limit so this doesn't go awry. |
| for (int i = 0; i < 64 && fscanf(fp, " %10s %*s", table) == 1; ++i) { |
| run_command("ROUTE TABLE IPv4", 10, "ip", "-4", "route", "show", "table", table, NULL); |
| run_command("ROUTE TABLE IPv6", 10, "ip", "-6", "route", "show", "table", table, NULL); |
| } |
| fclose(fp); |
| } |
| |
| /* overall progress */ |
| int progress = 0; |
| int do_update_progress = 0; // Set by dumpstate.cpp |
| int weight_total = WEIGHT_TOTAL; |
| |
| // TODO: make this function thread safe if sections are generated in parallel. |
| void update_progress(int delta) { |
| if (!do_update_progress) return; |
| |
| progress += delta; |
| |
| char key[PROPERTY_KEY_MAX]; |
| char value[PROPERTY_VALUE_MAX]; |
| |
| // adjusts max on the fly |
| if (progress > weight_total) { |
| int new_total = weight_total * 1.2; |
| MYLOGD("Adjusting total weight from %d to %d\n", weight_total, new_total); |
| weight_total = new_total; |
| snprintf(key, sizeof(key), "dumpstate.%d.max", getpid()); |
| snprintf(value, sizeof(value), "%d", weight_total); |
| int status = property_set(key, value); |
| if (status) { |
| MYLOGE("Could not update max weight by setting system property %s to %s: %d\n", |
| key, value, status); |
| } |
| } |
| |
| snprintf(key, sizeof(key), "dumpstate.%d.progress", getpid()); |
| snprintf(value, sizeof(value), "%d", progress); |
| |
| if (progress % 100 == 0) { |
| // We don't want to spam logcat, so only log multiples of 100. |
| MYLOGD("Setting progress (%s): %s/%d\n", key, value, weight_total); |
| } else { |
| // stderr is ignored on normal invocations, but useful when calling /system/bin/dumpstate |
| // directly for debuggging. |
| fprintf(stderr, "Setting progress (%s): %s/%d\n", key, value, weight_total); |
| } |
| |
| if (control_socket_fd >= 0) { |
| dprintf(control_socket_fd, "PROGRESS:%d/%d\n", progress, weight_total); |
| fsync(control_socket_fd); |
| } |
| |
| int status = property_set(key, value); |
| if (status) { |
| MYLOGE("Could not update progress by setting system property %s to %s: %d\n", |
| key, value, status); |
| } |
| } |
| |
| void take_screenshot(const std::string& path) { |
| const char *args[] = { "/system/bin/screencap", "-p", path.c_str(), NULL }; |
| run_command_always(NULL, DONT_DROP_ROOT, REDIRECT_TO_STDERR, 10, args); |
| } |
| |
| void vibrate(FILE* vibrator, int ms) { |
| fprintf(vibrator, "%d\n", ms); |
| fflush(vibrator); |
| } |
| |
| bool is_dir(const char* pathname) { |
| struct stat info; |
| if (stat(pathname, &info) == -1) { |
| return false; |
| } |
| return S_ISDIR(info.st_mode); |
| } |
| |
| time_t get_mtime(int fd, time_t default_mtime) { |
| struct stat info; |
| if (fstat(fd, &info) == -1) { |
| return default_mtime; |
| } |
| return info.st_mtime; |
| } |
| |
| void dump_emmc_ecsd(const char *ext_csd_path) { |
| // List of interesting offsets |
| struct hex { |
| char str[2]; |
| }; |
| static const size_t EXT_CSD_REV = 192 * sizeof(hex); |
| static const size_t EXT_PRE_EOL_INFO = 267 * sizeof(hex); |
| static const size_t EXT_DEVICE_LIFE_TIME_EST_TYP_A = 268 * sizeof(hex); |
| static const size_t EXT_DEVICE_LIFE_TIME_EST_TYP_B = 269 * sizeof(hex); |
| |
| std::string buffer; |
| if (!android::base::ReadFileToString(ext_csd_path, &buffer)) { |
| return; |
| } |
| |
| printf("------ %s Extended CSD ------\n", ext_csd_path); |
| |
| if (buffer.length() < (EXT_CSD_REV + sizeof(hex))) { |
| printf("*** %s: truncated content %zu\n\n", ext_csd_path, buffer.length()); |
| return; |
| } |
| |
| int ext_csd_rev = 0; |
| std::string sub = buffer.substr(EXT_CSD_REV, sizeof(hex)); |
| if (sscanf(sub.c_str(), "%2x", &ext_csd_rev) != 1) { |
| printf("*** %s: EXT_CSD_REV parse error \"%s\"\n\n", |
| ext_csd_path, sub.c_str()); |
| return; |
| } |
| |
| static const char *ver_str[] = { |
| "4.0", "4.1", "4.2", "4.3", "Obsolete", "4.41", "4.5", "5.0" |
| }; |
| printf("rev 1.%d (MMC %s)\n", |
| ext_csd_rev, |
| (ext_csd_rev < (int)(sizeof(ver_str) / sizeof(ver_str[0]))) ? |
| ver_str[ext_csd_rev] : |
| "Unknown"); |
| if (ext_csd_rev < 7) { |
| printf("\n"); |
| return; |
| } |
| |
| if (buffer.length() < (EXT_PRE_EOL_INFO + sizeof(hex))) { |
| printf("*** %s: truncated content %zu\n\n", ext_csd_path, buffer.length()); |
| return; |
| } |
| |
| int ext_pre_eol_info = 0; |
| sub = buffer.substr(EXT_PRE_EOL_INFO, sizeof(hex)); |
| if (sscanf(sub.c_str(), "%2x", &ext_pre_eol_info) != 1) { |
| printf("*** %s: PRE_EOL_INFO parse error \"%s\"\n\n", |
| ext_csd_path, sub.c_str()); |
| return; |
| } |
| |
| static const char *eol_str[] = { |
| "Undefined", |
| "Normal", |
| "Warning (consumed 80% of reserve)", |
| "Urgent (consumed 90% of reserve)" |
| }; |
| printf("PRE_EOL_INFO %d (MMC %s)\n", |
| ext_pre_eol_info, |
| eol_str[(ext_pre_eol_info < (int) |
| (sizeof(eol_str) / sizeof(eol_str[0]))) ? |
| ext_pre_eol_info : 0]); |
| |
| for (size_t lifetime = EXT_DEVICE_LIFE_TIME_EST_TYP_A; |
| lifetime <= EXT_DEVICE_LIFE_TIME_EST_TYP_B; |
| lifetime += sizeof(hex)) { |
| int ext_device_life_time_est; |
| static const char *est_str[] = { |
| "Undefined", |
| "0-10% of device lifetime used", |
| "10-20% of device lifetime used", |
| "20-30% of device lifetime used", |
| "30-40% of device lifetime used", |
| "40-50% of device lifetime used", |
| "50-60% of device lifetime used", |
| "60-70% of device lifetime used", |
| "70-80% of device lifetime used", |
| "80-90% of device lifetime used", |
| "90-100% of device lifetime used", |
| "Exceeded the maximum estimated device lifetime", |
| }; |
| |
| if (buffer.length() < (lifetime + sizeof(hex))) { |
| printf("*** %s: truncated content %zu\n", ext_csd_path, buffer.length()); |
| break; |
| } |
| |
| ext_device_life_time_est = 0; |
| sub = buffer.substr(lifetime, sizeof(hex)); |
| if (sscanf(sub.c_str(), "%2x", &ext_device_life_time_est) != 1) { |
| printf("*** %s: DEVICE_LIFE_TIME_EST_TYP_%c parse error \"%s\"\n", |
| ext_csd_path, |
| (unsigned)((lifetime - EXT_DEVICE_LIFE_TIME_EST_TYP_A) / |
| sizeof(hex)) + 'A', |
| sub.c_str()); |
| continue; |
| } |
| printf("DEVICE_LIFE_TIME_EST_TYP_%c %d (MMC %s)\n", |
| (unsigned)((lifetime - EXT_DEVICE_LIFE_TIME_EST_TYP_A) / |
| sizeof(hex)) + 'A', |
| ext_device_life_time_est, |
| est_str[(ext_device_life_time_est < (int) |
| (sizeof(est_str) / sizeof(est_str[0]))) ? |
| ext_device_life_time_est : 0]); |
| } |
| |
| printf("\n"); |
| } |
| |
| // TODO: refactor all those commands that convert args |
| void format_args(int argc, const char *argv[], std::string *args) { |
| LOG_ALWAYS_FATAL_IF(args == nullptr); |
| for (int i = 0; i < argc; i++) { |
| args->append(argv[i]); |
| if (i < argc -1) { |
| args->append(" "); |
| } |
| } |
| } |
| void format_args(const char* command, const char *args[], std::string *string) { |
| LOG_ALWAYS_FATAL_IF(args == nullptr || command == nullptr); |
| string->append(command); |
| if (args[0] == nullptr) return; |
| string->append(" "); |
| |
| for (int arg = 1; arg <= 1000; ++arg) { |
| if (args[arg] == nullptr) return; |
| string->append(args[arg]); |
| if (args[arg+1] != nullptr) { |
| string->append(" "); |
| } |
| } |
| // TODO: not really working: if NULL is missing, it will crash dumpstate. |
| MYLOGE("internal error: missing NULL entry on %s", string->c_str()); |
| } |