services/surfaceflinger/DisplayHardware/VirtualDisplaySurface.h - LeafOS-Project/android_frameworks_native - Gitiles

 /*
  * Copyright 2013 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #ifndef ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H
 #define ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H

 #include <gui/ConsumerBase.h>
 #include <gui/IGraphicBufferProducer.h>

 #include "DisplaySurface.h"

 // ---------------------------------------------------------------------------
 namespace android {
 // ---------------------------------------------------------------------------

 class HWComposer;

 /* This DisplaySurface implementation supports virtual displays, where GLES
  * and/or HWC compose into a buffer that is then passed to an arbitrary
  * consumer (the sink) running in another process.
  *
  * The simplest case is when the virtual display will never use the h/w
  * composer -- either the h/w composer doesn't support writing to buffers, or
  * there are more virtual displays than it supports simultaneously. In this
  * case, the GLES driver works directly with the output buffer queue, and
  * calls to the VirtualDisplay from SurfaceFlinger and DisplayHardware do
  * nothing.
  *
  * If h/w composer might be used, then each frame will fall into one of three
  * configurations: GLES-only, HWC-only, and MIXED composition. In all of these,
  * we must provide a FB target buffer and output buffer for the HWC set() call.
  *
  * In GLES-only composition, the GLES driver is given a buffer from the sink to
  * render into. When the GLES driver queues the buffer to the
  * VirtualDisplaySurface, the VirtualDisplaySurface holds onto it instead of
  * immediately queueing it to the sink. The buffer is used as both the FB
  * target and output buffer for HWC, though on these frames the HWC doesn't
  * do any work for this display and doesn't write to the output buffer. After
  * composition is complete, the buffer is queued to the sink.
  *
  * In HWC-only composition, the VirtualDisplaySurface dequeues a buffer from
  * the sink and passes it to HWC as both the FB target buffer and output
  * buffer. The HWC doesn't need to read from the FB target buffer, but does
  * write to the output buffer. After composition is complete, the buffer is
  * queued to the sink.
  *
  * On MIXED frames, things become more complicated, since some h/w composer
  * implementations can't read from and write to the same buffer. This class has
  * an internal BufferQueue that it uses as a scratch buffer pool. The GLES
  * driver is given a scratch buffer to render into. When it finishes rendering,
  * the buffer is queued and then immediately acquired by the
  * VirtualDisplaySurface. The scratch buffer is then used as the FB target
  * buffer for HWC, and a separate buffer is dequeued from the sink and used as
  * the HWC output buffer. When HWC composition is complete, the scratch buffer
  * is released and the output buffer is queued to the sink.
  */
 class VirtualDisplaySurface : public DisplaySurface,
                               public BnGraphicBufferProducer,
                               private ConsumerBase {
 public:
     VirtualDisplaySurface(HWComposer& hwc, int32_t dispId,
             const sp<IGraphicBufferProducer>& sink,
             const sp<BufferQueue>& bq,
             const String8& name);

     //
     // DisplaySurface interface
     //
     virtual status_t beginFrame(bool mustRecompose);
     virtual status_t prepareFrame(CompositionType compositionType);
     virtual status_t compositionComplete();
     virtual status_t advanceFrame();
     virtual void onFrameCommitted();
     virtual void dump(String8& result) const;

 private:
     enum Source {SOURCE_SINK = 0, SOURCE_SCRATCH = 1};

     virtual ~VirtualDisplaySurface();

     //
     // IGraphicBufferProducer interface, used by the GLES driver.
     //
     virtual status_t requestBuffer(int pslot, sp<GraphicBuffer>* outBuf);
     virtual status_t setBufferCount(int bufferCount);
     virtual status_t dequeueBuffer(int* pslot, sp<Fence>* fence, bool async,
             uint32_t w, uint32_t h, uint32_t format, uint32_t usage);
     virtual status_t detachBuffer(int slot);
     virtual status_t attachBuffer(int* slot, const sp<GraphicBuffer>& buffer);
     virtual status_t queueBuffer(int pslot,
             const QueueBufferInput& input, QueueBufferOutput* output);
     virtual void cancelBuffer(int pslot, const sp<Fence>& fence);
     virtual int query(int what, int* value);
     virtual status_t connect(const sp<IBinder>& token,
             int api, bool producerControlledByApp, QueueBufferOutput* output);
     virtual status_t disconnect(int api);

     //
     // Utility methods
     //
     static Source fbSourceForCompositionType(CompositionType type);
     status_t dequeueBuffer(Source source, uint32_t format, uint32_t usage,
             int* sslot, sp<Fence>* fence);
     void updateQueueBufferOutput(const QueueBufferOutput& qbo);
     void resetPerFrameState();
     status_t refreshOutputBuffer();

     // Both the sink and scratch buffer pools have their own set of slots
     // ("source slots", or "sslot"). We have to merge these into the single
     // set of slots used by the GLES producer ("producer slots" or "pslot") and
     // internally in the VirtualDisplaySurface. To minimize the number of times
     // a producer slot switches which source it comes from, we map source slot
     // numbers to producer slot numbers differently for each source.
     static int mapSource2ProducerSlot(Source source, int sslot);
     static int mapProducer2SourceSlot(Source source, int pslot);

     //
     // Immutable after construction
     //
     HWComposer& mHwc;
     const int32_t mDisplayId;
     const String8 mDisplayName;
     sp<IGraphicBufferProducer> mSource[2]; // indexed by SOURCE_*
     uint32_t mDefaultOutputFormat;

     //
     // Inter-frame state
     //

     // To avoid buffer reallocations, we track the buffer usage and format
     // we used on the previous frame and use it again on the new frame. If
     // the composition type changes or the GLES driver starts requesting
     // different usage/format, we'll get a new buffer.
     uint32_t mOutputFormat;
     uint32_t mOutputUsage;

     // Since we present a single producer interface to the GLES driver, but
     // are internally muxing between the sink and scratch producers, we have
     // to keep track of which source last returned each producer slot from
     // dequeueBuffer. Each bit in mLastSlotSource corresponds to a producer
     // slot. Both mProducerSlotSource and mProducerBuffers are indexed by a
     // "producer slot"; see the mapSlot*() functions.
     uint32_t mProducerSlotSource;
     sp<GraphicBuffer> mProducerBuffers[BufferQueue::NUM_BUFFER_SLOTS];

     // The QueueBufferOutput with the latest info from the sink, and with the
     // transform hint cleared. Since we defer queueBuffer from the GLES driver
     // to the sink, we have to return the previous version.
     QueueBufferOutput mQueueBufferOutput;

     //
     // Intra-frame state
     //

     // Composition type and GLES buffer source for the current frame.
     // Valid after prepareFrame(), cleared in onFrameCommitted.
     CompositionType mCompositionType;

     // Details of the current sink buffer. These become valid when a buffer is
     // dequeued from the sink, and are used when queueing the buffer.
     uint32_t mSinkBufferWidth, mSinkBufferHeight;

     // mFbFence is the fence HWC should wait for before reading the framebuffer
     // target buffer.
     sp<Fence> mFbFence;

     // mOutputFence is the fence HWC should wait for before writing to the
     // output buffer.
     sp<Fence> mOutputFence;

     // Producer slot numbers for the buffers to use for HWC framebuffer target
     // and output.
     int mFbProducerSlot;
     int mOutputProducerSlot;

     // Debug only -- track the sequence of events in each frame so we can make
     // sure they happen in the order we expect. This class implicitly models
     // a state machine; this enum/variable makes it explicit.
     //
     // +-----------+-------------------+-------------+
     // | State     | Event             || Next State |
     // +-----------+-------------------+-------------+
     // | IDLE      | beginFrame        || BEGUN      |
     // | BEGUN     | prepareFrame      || PREPARED   |
     // | PREPARED  | dequeueBuffer [1] || GLES       |
     // | PREPARED  | advanceFrame [2]  || HWC        |
     // | GLES      | queueBuffer       || GLES_DONE  |
     // | GLES_DONE | advanceFrame      || HWC        |
     // | HWC       | onFrameCommitted  || IDLE       |
     // +-----------+-------------------++------------+
     // [1] COMPOSITION_GLES and COMPOSITION_MIXED frames.
     // [2] COMPOSITION_HWC frames.
     //
     enum DbgState {
         // no buffer dequeued, don't know anything about the next frame
         DBG_STATE_IDLE,
         // output buffer dequeued, framebuffer source not yet known
         DBG_STATE_BEGUN,
         // output buffer dequeued, framebuffer source known but not provided
         // to GLES yet.
         DBG_STATE_PREPARED,
         // GLES driver has a buffer dequeued
         DBG_STATE_GLES,
         // GLES driver has queued the buffer, we haven't sent it to HWC yet
         DBG_STATE_GLES_DONE,
         // HWC has the buffer for this frame
         DBG_STATE_HWC,
     };
     DbgState mDbgState;
     CompositionType mDbgLastCompositionType;

     const char* dbgStateStr() const;
     static const char* dbgSourceStr(Source s);

     bool mMustRecompose;
 };

 // ---------------------------------------------------------------------------
 } // namespace android
 // ---------------------------------------------------------------------------

 #endif // ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H
	/*
	* Copyright 2013 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H
	#define ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H

	#include <gui/ConsumerBase.h>
	#include <gui/IGraphicBufferProducer.h>

	#include "DisplaySurface.h"

	// ---------------------------------------------------------------------------
	namespace android {
	// ---------------------------------------------------------------------------

	class HWComposer;

	/* This DisplaySurface implementation supports virtual displays, where GLES
	* and/or HWC compose into a buffer that is then passed to an arbitrary
	* consumer (the sink) running in another process.
	*
	* The simplest case is when the virtual display will never use the h/w
	* composer -- either the h/w composer doesn't support writing to buffers, or
	* there are more virtual displays than it supports simultaneously. In this
	* case, the GLES driver works directly with the output buffer queue, and
	* calls to the VirtualDisplay from SurfaceFlinger and DisplayHardware do
	* nothing.
	*
	* If h/w composer might be used, then each frame will fall into one of three
	* configurations: GLES-only, HWC-only, and MIXED composition. In all of these,
	* we must provide a FB target buffer and output buffer for the HWC set() call.
	*
	* In GLES-only composition, the GLES driver is given a buffer from the sink to
	* render into. When the GLES driver queues the buffer to the
	* VirtualDisplaySurface, the VirtualDisplaySurface holds onto it instead of
	* immediately queueing it to the sink. The buffer is used as both the FB
	* target and output buffer for HWC, though on these frames the HWC doesn't
	* do any work for this display and doesn't write to the output buffer. After
	* composition is complete, the buffer is queued to the sink.
	*
	* In HWC-only composition, the VirtualDisplaySurface dequeues a buffer from
	* the sink and passes it to HWC as both the FB target buffer and output
	* buffer. The HWC doesn't need to read from the FB target buffer, but does
	* write to the output buffer. After composition is complete, the buffer is
	* queued to the sink.
	*
	* On MIXED frames, things become more complicated, since some h/w composer
	* implementations can't read from and write to the same buffer. This class has
	* an internal BufferQueue that it uses as a scratch buffer pool. The GLES
	* driver is given a scratch buffer to render into. When it finishes rendering,
	* the buffer is queued and then immediately acquired by the
	* VirtualDisplaySurface. The scratch buffer is then used as the FB target
	* buffer for HWC, and a separate buffer is dequeued from the sink and used as
	* the HWC output buffer. When HWC composition is complete, the scratch buffer
	* is released and the output buffer is queued to the sink.
	*/
	class VirtualDisplaySurface : public DisplaySurface,
	public BnGraphicBufferProducer,
	private ConsumerBase {
	public:
	VirtualDisplaySurface(HWComposer& hwc, int32_t dispId,
	const sp<IGraphicBufferProducer>& sink,
	const sp<BufferQueue>& bq,
	const String8& name);

	//
	// DisplaySurface interface
	//
	virtual status_t beginFrame(bool mustRecompose);
	virtual status_t prepareFrame(CompositionType compositionType);
	virtual status_t compositionComplete();
	virtual status_t advanceFrame();
	virtual void onFrameCommitted();
	virtual void dump(String8& result) const;

	private:
	enum Source {SOURCE_SINK = 0, SOURCE_SCRATCH = 1};

	virtual ~VirtualDisplaySurface();

	//
	// IGraphicBufferProducer interface, used by the GLES driver.
	//
	virtual status_t requestBuffer(int pslot, sp<GraphicBuffer>* outBuf);
	virtual status_t setBufferCount(int bufferCount);
	virtual status_t dequeueBuffer(int* pslot, sp<Fence>* fence, bool async,
	uint32_t w, uint32_t h, uint32_t format, uint32_t usage);
	virtual status_t detachBuffer(int slot);
	virtual status_t attachBuffer(int* slot, const sp<GraphicBuffer>& buffer);
	virtual status_t queueBuffer(int pslot,
	const QueueBufferInput& input, QueueBufferOutput* output);
	virtual void cancelBuffer(int pslot, const sp<Fence>& fence);
	virtual int query(int what, int* value);
	virtual status_t connect(const sp<IBinder>& token,
	int api, bool producerControlledByApp, QueueBufferOutput* output);
	virtual status_t disconnect(int api);

	//
	// Utility methods
	//
	static Source fbSourceForCompositionType(CompositionType type);
	status_t dequeueBuffer(Source source, uint32_t format, uint32_t usage,
	int* sslot, sp<Fence>* fence);
	void updateQueueBufferOutput(const QueueBufferOutput& qbo);
	void resetPerFrameState();
	status_t refreshOutputBuffer();

	// Both the sink and scratch buffer pools have their own set of slots
	// ("source slots", or "sslot"). We have to merge these into the single
	// set of slots used by the GLES producer ("producer slots" or "pslot") and
	// internally in the VirtualDisplaySurface. To minimize the number of times
	// a producer slot switches which source it comes from, we map source slot
	// numbers to producer slot numbers differently for each source.
	static int mapSource2ProducerSlot(Source source, int sslot);
	static int mapProducer2SourceSlot(Source source, int pslot);

	//
	// Immutable after construction
	//
	HWComposer& mHwc;
	const int32_t mDisplayId;
	const String8 mDisplayName;
	sp<IGraphicBufferProducer> mSource[2]; // indexed by SOURCE_*
	uint32_t mDefaultOutputFormat;

	//
	// Inter-frame state
	//

	// To avoid buffer reallocations, we track the buffer usage and format
	// we used on the previous frame and use it again on the new frame. If
	// the composition type changes or the GLES driver starts requesting
	// different usage/format, we'll get a new buffer.
	uint32_t mOutputFormat;
	uint32_t mOutputUsage;

	// Since we present a single producer interface to the GLES driver, but
	// are internally muxing between the sink and scratch producers, we have
	// to keep track of which source last returned each producer slot from
	// dequeueBuffer. Each bit in mLastSlotSource corresponds to a producer
	// slot. Both mProducerSlotSource and mProducerBuffers are indexed by a
	// "producer slot"; see the mapSlot*() functions.
	uint32_t mProducerSlotSource;
	sp<GraphicBuffer> mProducerBuffers[BufferQueue::NUM_BUFFER_SLOTS];

	// The QueueBufferOutput with the latest info from the sink, and with the
	// transform hint cleared. Since we defer queueBuffer from the GLES driver
	// to the sink, we have to return the previous version.
	QueueBufferOutput mQueueBufferOutput;

	//
	// Intra-frame state
	//

	// Composition type and GLES buffer source for the current frame.
	// Valid after prepareFrame(), cleared in onFrameCommitted.
	CompositionType mCompositionType;

	// Details of the current sink buffer. These become valid when a buffer is
	// dequeued from the sink, and are used when queueing the buffer.
	uint32_t mSinkBufferWidth, mSinkBufferHeight;

	// mFbFence is the fence HWC should wait for before reading the framebuffer
	// target buffer.
	sp<Fence> mFbFence;

	// mOutputFence is the fence HWC should wait for before writing to the
	// output buffer.
	sp<Fence> mOutputFence;

	// Producer slot numbers for the buffers to use for HWC framebuffer target
	// and output.
	int mFbProducerSlot;
	int mOutputProducerSlot;

	// Debug only -- track the sequence of events in each frame so we can make
	// sure they happen in the order we expect. This class implicitly models
	// a state machine; this enum/variable makes it explicit.
	//
	// +-----------+-------------------+-------------+
	// \| State \| Event \|\| Next State \|
	// +-----------+-------------------+-------------+
	// \| IDLE \| beginFrame \|\| BEGUN \|
	// \| BEGUN \| prepareFrame \|\| PREPARED \|
	// \| PREPARED \| dequeueBuffer [1] \|\| GLES \|
	// \| PREPARED \| advanceFrame [2] \|\| HWC \|
	// \| GLES \| queueBuffer \|\| GLES_DONE \|
	// \| GLES_DONE \| advanceFrame \|\| HWC \|
	// \| HWC \| onFrameCommitted \|\| IDLE \|
	// +-----------+-------------------++------------+
	// [1] COMPOSITION_GLES and COMPOSITION_MIXED frames.
	// [2] COMPOSITION_HWC frames.
	//
	enum DbgState {
	// no buffer dequeued, don't know anything about the next frame
	DBG_STATE_IDLE,
	// output buffer dequeued, framebuffer source not yet known
	DBG_STATE_BEGUN,
	// output buffer dequeued, framebuffer source known but not provided
	// to GLES yet.
	DBG_STATE_PREPARED,
	// GLES driver has a buffer dequeued
	DBG_STATE_GLES,
	// GLES driver has queued the buffer, we haven't sent it to HWC yet
	DBG_STATE_GLES_DONE,
	// HWC has the buffer for this frame
	DBG_STATE_HWC,
	};
	DbgState mDbgState;
	CompositionType mDbgLastCompositionType;

	const char* dbgStateStr() const;
	static const char* dbgSourceStr(Source s);

	bool mMustRecompose;
	};

	// ---------------------------------------------------------------------------
	} // namespace android
	// ---------------------------------------------------------------------------

	#endif // ANDROID_SF_VIRTUAL_DISPLAY_SURFACE_H