include/gui/ConsumerBase.h - LeafOS-Project/android_frameworks_native - Gitiles

 /*
  * Copyright (C) 2010 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #ifndef ANDROID_GUI_CONSUMERBASE_H
 #define ANDROID_GUI_CONSUMERBASE_H

 #include <gui/BufferQueue.h>

 #include <ui/GraphicBuffer.h>

 #include <utils/String8.h>
 #include <utils/Vector.h>
 #include <utils/threads.h>
 #include <gui/IConsumerListener.h>

 namespace android {
 // ----------------------------------------------------------------------------

 class String8;

 // ConsumerBase is a base class for BufferQueue consumer end-points. It
 // handles common tasks like management of the connection to the BufferQueue
 // and the buffer pool.
 class ConsumerBase : public virtual RefBase,
         protected ConsumerListener {
 public:
     struct FrameAvailableListener : public virtual RefBase {
         // onFrameAvailable() is called each time an additional frame becomes
         // available for consumption. This means that frames that are queued
         // while in asynchronous mode only trigger the callback if no previous
         // frames are pending. Frames queued while in synchronous mode always
         // trigger the callback.
         //
         // This is called without any lock held and can be called concurrently
         // by multiple threads.
         virtual void onFrameAvailable() = 0;
     };

     virtual ~ConsumerBase();

     // abandon frees all the buffers and puts the ConsumerBase into the
     // 'abandoned' state.  Once put in this state the ConsumerBase can never
     // leave it.  When in the 'abandoned' state, all methods of the
     // IGraphicBufferProducer interface will fail with the NO_INIT error.
     //
     // Note that while calling this method causes all the buffers to be freed
     // from the perspective of the the ConsumerBase, if there are additional
     // references on the buffers (e.g. if a buffer is referenced by a client
     // or by OpenGL ES as a texture) then those buffer will remain allocated.
     void abandon();

     // set the name of the ConsumerBase that will be used to identify it in
     // log messages.
     void setName(const String8& name);

     // dump writes the current state to a string. Child classes should add
     // their state to the dump by overriding the dumpLocked method, which is
     // called by these methods after locking the mutex.
     void dump(String8& result) const;
     void dump(String8& result, const char* prefix) const;

     // setFrameAvailableListener sets the listener object that will be notified
     // when a new frame becomes available.
     void setFrameAvailableListener(const wp<FrameAvailableListener>& listener);

 private:
     ConsumerBase(const ConsumerBase&);
     void operator=(const ConsumerBase&);

 protected:
     // ConsumerBase constructs a new ConsumerBase object to consume image
     // buffers from the given IGraphicBufferConsumer.
     // The controlledByApp flag indicates that this consumer is under the application's
     // control.
     ConsumerBase(const sp<IGraphicBufferConsumer>& consumer, bool controlledByApp = false);

     // onLastStrongRef gets called by RefBase just before the dtor of the most
     // derived class.  It is used to clean up the buffers so that ConsumerBase
     // can coordinate the clean-up by calling into virtual methods implemented
     // by the derived classes.  This would not be possible from the
     // ConsuemrBase dtor because by the time that gets called the derived
     // classes have already been destructed.
     //
     // This methods should not need to be overridden by derived classes, but
     // if they are overridden the ConsumerBase implementation must be called
     // from the derived class.
     virtual void onLastStrongRef(const void* id);

     // Implementation of the IConsumerListener interface.  These
     // calls are used to notify the ConsumerBase of asynchronous events in the
     // BufferQueue.  These methods should not need to be overridden by derived
     // classes, but if they are overridden the ConsumerBase implementation
     // must be called from the derived class.
     virtual void onFrameAvailable();
     virtual void onBuffersReleased();

     // freeBufferLocked frees up the given buffer slot.  If the slot has been
     // initialized this will release the reference to the GraphicBuffer in that
     // slot.  Otherwise it has no effect.
     //
     // Derived classes should override this method to clean up any state they
     // keep per slot.  If it is overridden, the derived class's implementation
     // must call ConsumerBase::freeBufferLocked.
     //
     // This method must be called with mMutex locked.
     virtual void freeBufferLocked(int slotIndex);

     // abandonLocked puts the BufferQueue into the abandoned state, causing
     // all future operations on it to fail. This method rather than the public
     // abandon method should be overridden by child classes to add abandon-
     // time behavior.
     //
     // Derived classes should override this method to clean up any object
     // state they keep (as opposed to per-slot state).  If it is overridden,
     // the derived class's implementation must call ConsumerBase::abandonLocked.
     //
     // This method must be called with mMutex locked.
     virtual void abandonLocked();

     // dumpLocked dumps the current state of the ConsumerBase object to the
     // result string.  Each line is prefixed with the string pointed to by the
     // prefix argument.  The buffer argument points to a buffer that may be
     // used for intermediate formatting data, and the size of that buffer is
     // indicated by the size argument.
     //
     // Derived classes should override this method to dump their internal
     // state.  If this method is overridden the derived class's implementation
     // should call ConsumerBase::dumpLocked.
     //
     // This method must be called with mMutex locked.
     virtual void dumpLocked(String8& result, const char* prefix) const;

     // acquireBufferLocked fetches the next buffer from the BufferQueue and
     // updates the buffer slot for the buffer returned.
     //
     // Derived classes should override this method to perform any
     // initialization that must take place the first time a buffer is assigned
     // to a slot.  If it is overridden the derived class's implementation must
     // call ConsumerBase::acquireBufferLocked.
     virtual status_t acquireBufferLocked(IGraphicBufferConsumer::BufferItem *item,
         nsecs_t presentWhen);

     // releaseBufferLocked relinquishes control over a buffer, returning that
     // control to the BufferQueue.
     //
     // Derived classes should override this method to perform any cleanup that
     // must take place when a buffer is released back to the BufferQueue.  If
     // it is overridden the derived class's implementation must call
     // ConsumerBase::releaseBufferLocked.e
     virtual status_t releaseBufferLocked(int slot,
             const sp<GraphicBuffer> graphicBuffer,
             EGLDisplay display, EGLSyncKHR eglFence);

     // returns true iff the slot still has the graphicBuffer in it.
     bool stillTracking(int slot, const sp<GraphicBuffer> graphicBuffer);

     // addReleaseFence* adds the sync points associated with a fence to the set
     // of sync points that must be reached before the buffer in the given slot
     // may be used after the slot has been released.  This should be called by
     // derived classes each time some asynchronous work is kicked off that
     // references the buffer.
     status_t addReleaseFence(int slot,
             const sp<GraphicBuffer> graphicBuffer, const sp<Fence>& fence);
     status_t addReleaseFenceLocked(int slot,
             const sp<GraphicBuffer> graphicBuffer, const sp<Fence>& fence);

     // Slot contains the information and object references that
     // ConsumerBase maintains about a BufferQueue buffer slot.
     struct Slot {
         // mGraphicBuffer is the Gralloc buffer store in the slot or NULL if
         // no Gralloc buffer is in the slot.
         sp<GraphicBuffer> mGraphicBuffer;

         // mFence is a fence which will signal when the buffer associated with
         // this buffer slot is no longer being used by the consumer and can be
         // overwritten. The buffer can be dequeued before the fence signals;
         // the producer is responsible for delaying writes until it signals.
         sp<Fence> mFence;

         // the frame number of the last acquired frame for this slot
         uint64_t mFrameNumber;
     };

     // mSlots stores the buffers that have been allocated by the BufferQueue
     // for each buffer slot.  It is initialized to null pointers, and gets
     // filled in with the result of BufferQueue::acquire when the
     // client dequeues a buffer from a
     // slot that has not yet been used. The buffer allocated to a slot will also
     // be replaced if the requested buffer usage or geometry differs from that
     // of the buffer allocated to a slot.
     Slot mSlots[BufferQueue::NUM_BUFFER_SLOTS];

     // mAbandoned indicates that the BufferQueue will no longer be used to
     // consume images buffers pushed to it using the IGraphicBufferProducer
     // interface. It is initialized to false, and set to true in the abandon
     // method.  A BufferQueue that has been abandoned will return the NO_INIT
     // error from all IConsumerBase methods capable of returning an error.
     bool mAbandoned;

     // mName is a string used to identify the ConsumerBase in log messages.
     // It can be set by the setName method.
     String8 mName;

     // mFrameAvailableListener is the listener object that will be called when a
     // new frame becomes available. If it is not NULL it will be called from
     // queueBuffer.
     wp<FrameAvailableListener> mFrameAvailableListener;

     // The ConsumerBase has-a BufferQueue and is responsible for creating this object
     // if none is supplied
     sp<IGraphicBufferConsumer> mConsumer;

     // mMutex is the mutex used to prevent concurrent access to the member
     // variables of ConsumerBase objects. It must be locked whenever the
     // member variables are accessed or when any of the *Locked methods are
     // called.
     //
     // This mutex is intended to be locked by derived classes.
     mutable Mutex mMutex;
 };

 // ----------------------------------------------------------------------------
 }; // namespace android

 #endif // ANDROID_GUI_CONSUMERBASE_H
	/*
	* Copyright (C) 2010 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef ANDROID_GUI_CONSUMERBASE_H
	#define ANDROID_GUI_CONSUMERBASE_H

	#include <gui/BufferQueue.h>

	#include <ui/GraphicBuffer.h>

	#include <utils/String8.h>
	#include <utils/Vector.h>
	#include <utils/threads.h>
	#include <gui/IConsumerListener.h>

	namespace android {
	// ----------------------------------------------------------------------------

	class String8;

	// ConsumerBase is a base class for BufferQueue consumer end-points. It
	// handles common tasks like management of the connection to the BufferQueue
	// and the buffer pool.
	class ConsumerBase : public virtual RefBase,
	protected ConsumerListener {
	public:
	struct FrameAvailableListener : public virtual RefBase {
	// onFrameAvailable() is called each time an additional frame becomes
	// available for consumption. This means that frames that are queued
	// while in asynchronous mode only trigger the callback if no previous
	// frames are pending. Frames queued while in synchronous mode always
	// trigger the callback.
	//
	// This is called without any lock held and can be called concurrently
	// by multiple threads.
	virtual void onFrameAvailable() = 0;
	};

	virtual ~ConsumerBase();

	// abandon frees all the buffers and puts the ConsumerBase into the
	// 'abandoned' state. Once put in this state the ConsumerBase can never
	// leave it. When in the 'abandoned' state, all methods of the
	// IGraphicBufferProducer interface will fail with the NO_INIT error.
	//
	// Note that while calling this method causes all the buffers to be freed
	// from the perspective of the the ConsumerBase, if there are additional
	// references on the buffers (e.g. if a buffer is referenced by a client
	// or by OpenGL ES as a texture) then those buffer will remain allocated.
	void abandon();

	// set the name of the ConsumerBase that will be used to identify it in
	// log messages.
	void setName(const String8& name);

	// dump writes the current state to a string. Child classes should add
	// their state to the dump by overriding the dumpLocked method, which is
	// called by these methods after locking the mutex.
	void dump(String8& result) const;
	void dump(String8& result, const char* prefix) const;

	// setFrameAvailableListener sets the listener object that will be notified
	// when a new frame becomes available.
	void setFrameAvailableListener(const wp<FrameAvailableListener>& listener);

	private:
	ConsumerBase(const ConsumerBase&);
	void operator=(const ConsumerBase&);

	protected:
	// ConsumerBase constructs a new ConsumerBase object to consume image
	// buffers from the given IGraphicBufferConsumer.
	// The controlledByApp flag indicates that this consumer is under the application's
	// control.
	ConsumerBase(const sp<IGraphicBufferConsumer>& consumer, bool controlledByApp = false);

	// onLastStrongRef gets called by RefBase just before the dtor of the most
	// derived class. It is used to clean up the buffers so that ConsumerBase
	// can coordinate the clean-up by calling into virtual methods implemented
	// by the derived classes. This would not be possible from the
	// ConsuemrBase dtor because by the time that gets called the derived
	// classes have already been destructed.
	//
	// This methods should not need to be overridden by derived classes, but
	// if they are overridden the ConsumerBase implementation must be called
	// from the derived class.
	virtual void onLastStrongRef(const void* id);

	// Implementation of the IConsumerListener interface. These
	// calls are used to notify the ConsumerBase of asynchronous events in the
	// BufferQueue. These methods should not need to be overridden by derived
	// classes, but if they are overridden the ConsumerBase implementation
	// must be called from the derived class.
	virtual void onFrameAvailable();
	virtual void onBuffersReleased();

	// freeBufferLocked frees up the given buffer slot. If the slot has been
	// initialized this will release the reference to the GraphicBuffer in that
	// slot. Otherwise it has no effect.
	//
	// Derived classes should override this method to clean up any state they
	// keep per slot. If it is overridden, the derived class's implementation
	// must call ConsumerBase::freeBufferLocked.
	//
	// This method must be called with mMutex locked.
	virtual void freeBufferLocked(int slotIndex);

	// abandonLocked puts the BufferQueue into the abandoned state, causing
	// all future operations on it to fail. This method rather than the public
	// abandon method should be overridden by child classes to add abandon-
	// time behavior.
	//
	// Derived classes should override this method to clean up any object
	// state they keep (as opposed to per-slot state). If it is overridden,
	// the derived class's implementation must call ConsumerBase::abandonLocked.
	//
	// This method must be called with mMutex locked.
	virtual void abandonLocked();

	// dumpLocked dumps the current state of the ConsumerBase object to the
	// result string. Each line is prefixed with the string pointed to by the
	// prefix argument. The buffer argument points to a buffer that may be
	// used for intermediate formatting data, and the size of that buffer is
	// indicated by the size argument.
	//
	// Derived classes should override this method to dump their internal
	// state. If this method is overridden the derived class's implementation
	// should call ConsumerBase::dumpLocked.
	//
	// This method must be called with mMutex locked.
	virtual void dumpLocked(String8& result, const char* prefix) const;

	// acquireBufferLocked fetches the next buffer from the BufferQueue and
	// updates the buffer slot for the buffer returned.
	//
	// Derived classes should override this method to perform any
	// initialization that must take place the first time a buffer is assigned
	// to a slot. If it is overridden the derived class's implementation must
	// call ConsumerBase::acquireBufferLocked.
	virtual status_t acquireBufferLocked(IGraphicBufferConsumer::BufferItem *item,
	nsecs_t presentWhen);

	// releaseBufferLocked relinquishes control over a buffer, returning that
	// control to the BufferQueue.
	//
	// Derived classes should override this method to perform any cleanup that
	// must take place when a buffer is released back to the BufferQueue. If
	// it is overridden the derived class's implementation must call
	// ConsumerBase::releaseBufferLocked.e
	virtual status_t releaseBufferLocked(int slot,
	const sp<GraphicBuffer> graphicBuffer,
	EGLDisplay display, EGLSyncKHR eglFence);

	// returns true iff the slot still has the graphicBuffer in it.
	bool stillTracking(int slot, const sp<GraphicBuffer> graphicBuffer);

	// addReleaseFence* adds the sync points associated with a fence to the set
	// of sync points that must be reached before the buffer in the given slot
	// may be used after the slot has been released. This should be called by
	// derived classes each time some asynchronous work is kicked off that
	// references the buffer.
	status_t addReleaseFence(int slot,
	const sp<GraphicBuffer> graphicBuffer, const sp<Fence>& fence);
	status_t addReleaseFenceLocked(int slot,
	const sp<GraphicBuffer> graphicBuffer, const sp<Fence>& fence);

	// Slot contains the information and object references that
	// ConsumerBase maintains about a BufferQueue buffer slot.
	struct Slot {
	// mGraphicBuffer is the Gralloc buffer store in the slot or NULL if
	// no Gralloc buffer is in the slot.
	sp<GraphicBuffer> mGraphicBuffer;

	// mFence is a fence which will signal when the buffer associated with
	// this buffer slot is no longer being used by the consumer and can be
	// overwritten. The buffer can be dequeued before the fence signals;
	// the producer is responsible for delaying writes until it signals.
	sp<Fence> mFence;

	// the frame number of the last acquired frame for this slot
	uint64_t mFrameNumber;
	};

	// mSlots stores the buffers that have been allocated by the BufferQueue
	// for each buffer slot. It is initialized to null pointers, and gets
	// filled in with the result of BufferQueue::acquire when the
	// client dequeues a buffer from a
	// slot that has not yet been used. The buffer allocated to a slot will also
	// be replaced if the requested buffer usage or geometry differs from that
	// of the buffer allocated to a slot.
	Slot mSlots[BufferQueue::NUM_BUFFER_SLOTS];

	// mAbandoned indicates that the BufferQueue will no longer be used to
	// consume images buffers pushed to it using the IGraphicBufferProducer
	// interface. It is initialized to false, and set to true in the abandon
	// method. A BufferQueue that has been abandoned will return the NO_INIT
	// error from all IConsumerBase methods capable of returning an error.
	bool mAbandoned;

	// mName is a string used to identify the ConsumerBase in log messages.
	// It can be set by the setName method.
	String8 mName;

	// mFrameAvailableListener is the listener object that will be called when a
	// new frame becomes available. If it is not NULL it will be called from
	// queueBuffer.
	wp<FrameAvailableListener> mFrameAvailableListener;

	// The ConsumerBase has-a BufferQueue and is responsible for creating this object
	// if none is supplied
	sp<IGraphicBufferConsumer> mConsumer;

	// mMutex is the mutex used to prevent concurrent access to the member
	// variables of ConsumerBase objects. It must be locked whenever the
	// member variables are accessed or when any of the *Locked methods are
	// called.
	//
	// This mutex is intended to be locked by derived classes.
	mutable Mutex mMutex;
	};

	// ----------------------------------------------------------------------------
	}; // namespace android

	#endif // ANDROID_GUI_CONSUMERBASE_H