| /* |
| * Copyright 2011, The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // #define LOG_NDEBUG 0 |
| #define LOG_TAG "AndroidMediaUtils" |
| |
| #include <aidl/android/hardware/graphics/common/PlaneLayoutComponentType.h> |
| #include <ui/GraphicBufferMapper.h> |
| #include <ui/GraphicTypes.h> |
| #include <utils/Log.h> |
| |
| #include "android_media_Utils.h" |
| |
| #define ALIGN(x, mask) ( ((x) + (mask) - 1) & ~((mask) - 1) ) |
| |
| // Must be in sync with the value in HeicCompositeStream.cpp |
| #define CAMERA3_HEIC_BLOB_ID 0x00FE |
| |
| namespace android { |
| |
| // -----------Utility functions used by ImageReader/Writer JNI----------------- |
| |
| enum { |
| IMAGE_MAX_NUM_PLANES = 3, |
| }; |
| |
| bool usingRGBAToJpegOverride(int32_t imageFormat, |
| int32_t containerFormat) { |
| return containerFormat == HAL_PIXEL_FORMAT_BLOB && imageFormat == HAL_PIXEL_FORMAT_RGBA_8888; |
| } |
| |
| int32_t applyFormatOverrides(int32_t imageFormat, int32_t containerFormat) { |
| // Using HAL_PIXEL_FORMAT_RGBA_8888 gralloc buffers containing JPEGs to get around SW |
| // write limitations for some platforms (b/17379185). |
| if (usingRGBAToJpegOverride(imageFormat, containerFormat)) { |
| return HAL_PIXEL_FORMAT_BLOB; |
| } |
| return containerFormat; |
| } |
| |
| bool isFormatOpaque(int format) { |
| // This is the only opaque format exposed in the ImageFormat public API. |
| // Note that we do support CPU access for HAL_PIXEL_FORMAT_RAW_OPAQUE |
| // (ImageFormat#RAW_PRIVATE) so it doesn't count as opaque here. |
| return format == HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED; |
| } |
| |
| bool isPossiblyYUV(PixelFormat format) { |
| switch (static_cast<int>(format)) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_RGB_888: |
| case HAL_PIXEL_FORMAT_RGB_565: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| case HAL_PIXEL_FORMAT_Y8: |
| case HAL_PIXEL_FORMAT_Y16: |
| case HAL_PIXEL_FORMAT_RAW16: |
| case HAL_PIXEL_FORMAT_RAW12: |
| case HAL_PIXEL_FORMAT_RAW10: |
| case HAL_PIXEL_FORMAT_RAW_OPAQUE: |
| case HAL_PIXEL_FORMAT_BLOB: |
| case HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED: |
| case HAL_PIXEL_FORMAT_YCBCR_P010: |
| return false; |
| |
| case HAL_PIXEL_FORMAT_YV12: |
| case HAL_PIXEL_FORMAT_YCbCr_420_888: |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP: |
| default: |
| return true; |
| } |
| } |
| |
| bool isPossibly10BitYUV(PixelFormat format) { |
| switch (static_cast<int>(format)) { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_RGB_888: |
| case HAL_PIXEL_FORMAT_RGB_565: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| case HAL_PIXEL_FORMAT_Y8: |
| case HAL_PIXEL_FORMAT_Y16: |
| case HAL_PIXEL_FORMAT_RAW16: |
| case HAL_PIXEL_FORMAT_RAW12: |
| case HAL_PIXEL_FORMAT_RAW10: |
| case HAL_PIXEL_FORMAT_RAW_OPAQUE: |
| case HAL_PIXEL_FORMAT_BLOB: |
| case HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED: |
| case HAL_PIXEL_FORMAT_YV12: |
| case HAL_PIXEL_FORMAT_YCbCr_420_888: |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP: |
| return false; |
| |
| case HAL_PIXEL_FORMAT_YCBCR_P010: |
| default: |
| return true; |
| } |
| } |
| |
| uint32_t Image_getBlobSize(LockedImage* buffer, bool usingRGBAOverride) { |
| ALOGV("%s", __FUNCTION__); |
| LOG_ALWAYS_FATAL_IF(buffer == NULL, "Input buffer is NULL!!!"); |
| uint32_t size = 0; |
| uint32_t width = buffer->width; |
| uint8_t* blobBuffer = buffer->data; |
| |
| if (usingRGBAOverride) { |
| width = (buffer->width + buffer->stride * (buffer->height - 1)) * 4; |
| } |
| |
| // First check for BLOB transport header at the end of the buffer |
| uint8_t* header = blobBuffer + (width - sizeof(struct camera3_jpeg_blob_v2)); |
| |
| // read camera3_jpeg_blob_v2 from the end of the passed buffer. |
| // requires memcpy because 'header' might not be properly aligned. |
| struct camera3_jpeg_blob_v2 blob; |
| memcpy(&blob, header, sizeof(struct camera3_jpeg_blob_v2)); |
| |
| if (blob.jpeg_blob_id == CAMERA3_JPEG_BLOB_ID || |
| blob.jpeg_blob_id == CAMERA3_HEIC_BLOB_ID) { |
| size = blob.jpeg_size; |
| ALOGV("%s: Jpeg/Heic size = %d", __FUNCTION__, size); |
| } |
| |
| // failed to find size, default to whole buffer |
| if (size == 0) { |
| /* |
| * This is a problem because not including the JPEG/BLOB header |
| * means that in certain rare situations a regular JPEG/HEIC blob |
| * will be mis-identified as having a header, in which case |
| * we will get a garbage size value. |
| */ |
| ALOGW("%s: No JPEG/HEIC header detected, defaulting to size=width=%d", |
| __FUNCTION__, width); |
| size = width; |
| } |
| |
| return size; |
| } |
| |
| status_t getLockedImageInfo(LockedImage* buffer, int idx, |
| int32_t containerFormat, uint8_t **base, uint32_t *size, int *pixelStride, int *rowStride) { |
| ALOGV("%s", __FUNCTION__); |
| LOG_ALWAYS_FATAL_IF(buffer == NULL, "Input buffer is NULL!!!"); |
| LOG_ALWAYS_FATAL_IF(base == NULL, "base is NULL!!!"); |
| LOG_ALWAYS_FATAL_IF(size == NULL, "size is NULL!!!"); |
| LOG_ALWAYS_FATAL_IF(pixelStride == NULL, "pixelStride is NULL!!!"); |
| LOG_ALWAYS_FATAL_IF(rowStride == NULL, "rowStride is NULL!!!"); |
| LOG_ALWAYS_FATAL_IF((idx >= IMAGE_MAX_NUM_PLANES) || (idx < 0), "idx (%d) is illegal", idx); |
| |
| ALOGV("%s: buffer: %p", __FUNCTION__, buffer); |
| |
| uint32_t dataSize, ySize, cSize, cStride; |
| uint32_t pStride = 0, rStride = 0; |
| uint8_t *cb, *cr; |
| uint8_t *pData = NULL; |
| int bytesPerPixel = 0; |
| |
| dataSize = ySize = cSize = cStride = 0; |
| int32_t fmt = buffer->flexFormat; |
| |
| bool usingRGBAOverride = usingRGBAToJpegOverride(fmt, containerFormat); |
| fmt = applyFormatOverrides(fmt, containerFormat); |
| switch (fmt) { |
| case HAL_PIXEL_FORMAT_YCbCr_420_888: |
| // Width and height should be multiple of 2. Wrong dataSize would be returned otherwise. |
| if (buffer->width % 2 != 0) { |
| ALOGE("YCbCr_420_888: width (%d) should be a multiple of 2", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height % 2 != 0) { |
| ALOGE("YCbCr_420_888: height (%d) should be a multiple of 2", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->width <= 0) { |
| ALOGE("YCbCr_420_888: width (%d) should be a > 0", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height <= 0) { |
| ALOGE("YCbCr_420_888: height (%d) should be a > 0", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| pData = |
| (idx == 0) ? |
| buffer->data : |
| (idx == 1) ? |
| buffer->dataCb : |
| buffer->dataCr; |
| // only map until last pixel |
| if (idx == 0) { |
| pStride = 1; |
| rStride = buffer->stride; |
| dataSize = buffer->stride * (buffer->height - 1) + buffer->width; |
| } else { |
| pStride = buffer->chromaStep; |
| rStride = buffer->chromaStride; |
| dataSize = buffer->chromaStride * (buffer->height / 2 - 1) + |
| buffer->chromaStep * (buffer->width / 2 - 1) + 1; |
| } |
| break; |
| // NV21 |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP: |
| // Width and height should be multiple of 2. Wrong dataSize would be returned otherwise. |
| if (buffer->width % 2 != 0) { |
| ALOGE("YCrCb_420_SP: width (%d) should be a multiple of 2", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height % 2 != 0) { |
| ALOGE("YCrCb_420_SP: height (%d) should be a multiple of 2", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->width <= 0) { |
| ALOGE("YCrCb_420_SP: width (%d) should be a > 0", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height <= 0) { |
| ALOGE("YCrCb_420_SP: height (%d) should be a > 0", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| cr = buffer->data + (buffer->stride * buffer->height); |
| cb = cr + 1; |
| // only map until last pixel |
| ySize = buffer->width * (buffer->height - 1) + buffer->width; |
| cSize = buffer->width * (buffer->height / 2 - 1) + buffer->width - 1; |
| |
| pData = |
| (idx == 0) ? |
| buffer->data : |
| (idx == 1) ? |
| cb: |
| cr; |
| |
| dataSize = (idx == 0) ? ySize : cSize; |
| pStride = (idx == 0) ? 1 : 2; |
| rStride = buffer->width; |
| break; |
| case HAL_PIXEL_FORMAT_YV12: |
| // Width and height should be multiple of 2. Wrong dataSize would be returned otherwise. |
| if (buffer->width % 2 != 0) { |
| ALOGE("YV12: width (%d) should be a multiple of 2", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height % 2 != 0) { |
| ALOGE("YV12: height (%d) should be a multiple of 2", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->width <= 0) { |
| ALOGE("YV12: width (%d) should be a > 0", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height <= 0) { |
| ALOGE("YV12: height (%d) should be a > 0", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| // Y and C stride need to be 16 pixel aligned. |
| LOG_ALWAYS_FATAL_IF(buffer->stride % 16, |
| "Stride is not 16 pixel aligned %d", buffer->stride); |
| |
| ySize = buffer->stride * buffer->height; |
| cStride = ALIGN(buffer->stride / 2, 16); |
| cr = buffer->data + ySize; |
| cSize = cStride * buffer->height / 2; |
| cb = cr + cSize; |
| |
| pData = |
| (idx == 0) ? |
| buffer->data : |
| (idx == 1) ? |
| cb : |
| cr; |
| dataSize = (idx == 0) ? ySize : cSize; |
| pStride = 1; |
| rStride = (idx == 0) ? buffer->stride : ALIGN(buffer->stride / 2, 16); |
| break; |
| case HAL_PIXEL_FORMAT_YCBCR_P010: |
| if (buffer->height % 2 != 0) { |
| ALOGE("YCBCR_P010: height (%d) should be a multiple of 2", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->width <= 0) { |
| ALOGE("YCBCR_P010: width (%d) should be a > 0", buffer->width); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->height <= 0) { |
| ALOGE("YCBCR_P010: height (%d) should be a > 0", buffer->height); |
| return BAD_VALUE; |
| } |
| |
| if (buffer->dataCb && buffer->dataCr) { |
| pData = |
| (idx == 0) ? |
| buffer->data : |
| (idx == 1) ? |
| buffer->dataCb : |
| buffer->dataCr; |
| // only map until last pixel |
| if (idx == 0) { |
| pStride = 2; |
| rStride = buffer->stride; |
| dataSize = buffer->stride * (buffer->height - 1) + buffer->width * 2; |
| } else { |
| pStride = buffer->chromaStep; |
| rStride = buffer->chromaStride; |
| dataSize = buffer->chromaStride * (buffer->height / 2 - 1) + |
| buffer->chromaStep * (buffer->width / 2); |
| } |
| break; |
| } |
| |
| ySize = (buffer->stride * 2) * buffer->height; |
| cSize = ySize / 2; |
| pStride = (idx == 0) ? 2 : 4; |
| cb = buffer->data + ySize; |
| cr = cb + 2; |
| |
| pData = (idx == 0) ? buffer->data : (idx == 1) ? cb : cr; |
| dataSize = (idx == 0) ? ySize : cSize; |
| rStride = buffer->stride * 2; |
| break; |
| case HAL_PIXEL_FORMAT_Y8: |
| // Single plane, 8bpp. |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height; |
| pStride = 1; |
| rStride = buffer->stride; |
| break; |
| case HAL_PIXEL_FORMAT_Y16: |
| bytesPerPixel = 2; |
| // Single plane, 16bpp, strides are specified in pixels, not in bytes |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height * bytesPerPixel; |
| pStride = bytesPerPixel; |
| rStride = buffer->stride * 2; |
| break; |
| case HAL_PIXEL_FORMAT_BLOB: |
| // Used for JPEG data, height must be 1, width == size, single plane. |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| // When RGBA override is being used, buffer height will be equal to width |
| if (usingRGBAOverride) { |
| LOG_ALWAYS_FATAL_IF(buffer->height != buffer->width, |
| "RGBA override BLOB format buffer should have height == width"); |
| } else { |
| LOG_ALWAYS_FATAL_IF(buffer->height != 1, |
| "BLOB format buffer should have height value 1"); |
| } |
| |
| |
| pData = buffer->data; |
| dataSize = Image_getBlobSize(buffer, usingRGBAOverride); |
| pStride = 0; |
| rStride = 0; |
| break; |
| case HAL_PIXEL_FORMAT_RAW16: |
| // Single plane 16bpp bayer data. |
| bytesPerPixel = 2; |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height * bytesPerPixel; |
| pStride = bytesPerPixel; |
| rStride = buffer->stride * 2; |
| break; |
| case HAL_PIXEL_FORMAT_RAW_OPAQUE: |
| // Used for RAW_OPAQUE data, height must be 1, width == size, single plane. |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| LOG_ALWAYS_FATAL_IF(buffer->height != 1, |
| "RAW_PRIVATE should has height value one but got %d", buffer->height); |
| pData = buffer->data; |
| dataSize = buffer->width; |
| pStride = 0; // RAW OPAQUE doesn't have pixel stride |
| rStride = 0; // RAW OPAQUE doesn't have row stride |
| break; |
| case HAL_PIXEL_FORMAT_RAW10: |
| // Single plane 10bpp bayer data. |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| LOG_ALWAYS_FATAL_IF(buffer->width % 4, |
| "Width is not multiple of 4 %d", buffer->width); |
| LOG_ALWAYS_FATAL_IF(buffer->height % 2, |
| "Height is not even %d", buffer->height); |
| LOG_ALWAYS_FATAL_IF(buffer->stride < (buffer->width * 10 / 8), |
| "stride (%d) should be at least %d", |
| buffer->stride, buffer->width * 10 / 8); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height; |
| pStride = 0; |
| rStride = buffer->stride; |
| break; |
| case HAL_PIXEL_FORMAT_RAW12: |
| // Single plane 10bpp bayer data. |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| LOG_ALWAYS_FATAL_IF(buffer->width % 4, |
| "Width is not multiple of 4 %d", buffer->width); |
| LOG_ALWAYS_FATAL_IF(buffer->height % 2, |
| "Height is not even %d", buffer->height); |
| LOG_ALWAYS_FATAL_IF(buffer->stride < (buffer->width * 12 / 8), |
| "stride (%d) should be at least %d", |
| buffer->stride, buffer->width * 12 / 8); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height; |
| pStride = 0; |
| rStride = buffer->stride; |
| break; |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| // Single plane, 32bpp. |
| bytesPerPixel = 4; |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height * bytesPerPixel; |
| pStride = bytesPerPixel; |
| rStride = buffer->stride * 4; |
| break; |
| case HAL_PIXEL_FORMAT_RGB_565: |
| // Single plane, 16bpp. |
| bytesPerPixel = 2; |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height * bytesPerPixel; |
| pStride = bytesPerPixel; |
| rStride = buffer->stride * 2; |
| break; |
| case HAL_PIXEL_FORMAT_RGB_888: |
| // Single plane, 24bpp. |
| bytesPerPixel = 3; |
| LOG_ALWAYS_FATAL_IF(idx != 0, "Wrong index: %d", idx); |
| pData = buffer->data; |
| dataSize = buffer->stride * buffer->height * bytesPerPixel; |
| pStride = bytesPerPixel; |
| rStride = buffer->stride * 3; |
| break; |
| default: |
| ALOGV("%s: unrecognized format 0x%x", __FUNCTION__, fmt); |
| return BAD_VALUE; |
| } |
| |
| *base = pData; |
| *size = dataSize; |
| *pixelStride = pStride; |
| *rowStride = rStride; |
| |
| return OK; |
| } |
| |
| static status_t extractP010Gralloc4PlaneLayout( |
| sp<GraphicBuffer> buffer, void *pData, int format, LockedImage *outputImage) { |
| using aidl::android::hardware::graphics::common::PlaneLayoutComponent; |
| using aidl::android::hardware::graphics::common::PlaneLayoutComponentType; |
| |
| GraphicBufferMapper& mapper = GraphicBufferMapper::get(); |
| std::vector<ui::PlaneLayout> planeLayouts; |
| status_t res = mapper.getPlaneLayouts(buffer->handle, &planeLayouts); |
| if (res != OK) { |
| return res; |
| } |
| constexpr int64_t Y_PLANE_COMPONENTS = int64_t(PlaneLayoutComponentType::Y); |
| constexpr int64_t CBCR_PLANE_COMPONENTS = |
| int64_t(PlaneLayoutComponentType::CB) | int64_t(PlaneLayoutComponentType::CR); |
| uint8_t *dataY = nullptr; |
| uint8_t *dataCb = nullptr; |
| uint8_t *dataCr = nullptr; |
| uint32_t strideY = 0; |
| uint32_t strideCbCr = 0; |
| for (const ui::PlaneLayout &layout : planeLayouts) { |
| ALOGV("gralloc4 plane: %s", layout.toString().c_str()); |
| int64_t components = 0; |
| for (const PlaneLayoutComponent &component : layout.components) { |
| if (component.sizeInBits != 10) { |
| return BAD_VALUE; |
| } |
| components |= component.type.value; |
| } |
| if (components == Y_PLANE_COMPONENTS) { |
| if (layout.sampleIncrementInBits != 16) { |
| return BAD_VALUE; |
| } |
| if (layout.components[0].offsetInBits != 6) { |
| return BAD_VALUE; |
| } |
| dataY = (uint8_t *)pData + layout.offsetInBytes; |
| strideY = layout.strideInBytes; |
| } else if (components == CBCR_PLANE_COMPONENTS) { |
| if (layout.sampleIncrementInBits != 32) { |
| return BAD_VALUE; |
| } |
| for (const PlaneLayoutComponent &component : layout.components) { |
| if (component.type.value == int64_t(PlaneLayoutComponentType::CB) |
| && component.offsetInBits != 6) { |
| return BAD_VALUE; |
| } |
| if (component.type.value == int64_t(PlaneLayoutComponentType::CR) |
| && component.offsetInBits != 22) { |
| return BAD_VALUE; |
| } |
| } |
| dataCb = (uint8_t *)pData + layout.offsetInBytes; |
| dataCr = (uint8_t *)pData + layout.offsetInBytes + 2; |
| strideCbCr = layout.strideInBytes; |
| } else { |
| return BAD_VALUE; |
| } |
| } |
| |
| outputImage->data = dataY; |
| outputImage->width = buffer->getWidth(); |
| outputImage->height = buffer->getHeight(); |
| outputImage->format = format; |
| outputImage->flexFormat = HAL_PIXEL_FORMAT_YCBCR_P010; |
| outputImage->stride = strideY; |
| |
| outputImage->dataCb = dataCb; |
| outputImage->dataCr = dataCr; |
| outputImage->chromaStride = strideCbCr; |
| outputImage->chromaStep = 4; |
| return OK; |
| } |
| |
| status_t lockImageFromBuffer(sp<GraphicBuffer> buffer, uint32_t inUsage, |
| const Rect& rect, int fenceFd, LockedImage* outputImage) { |
| ALOGV("%s: Try to lock the GraphicBuffer", __FUNCTION__); |
| |
| if (buffer == nullptr || outputImage == nullptr) { |
| ALOGE("Input BufferItem or output LockedImage is NULL!"); |
| return BAD_VALUE; |
| } |
| if (isFormatOpaque(buffer->getPixelFormat())) { |
| ALOGE("Opaque format buffer is not lockable!"); |
| return BAD_VALUE; |
| } |
| |
| void* pData = NULL; |
| android_ycbcr ycbcr = android_ycbcr(); |
| status_t res; |
| int format = buffer->getPixelFormat(); |
| int flexFormat = format; |
| |
| if (isPossiblyYUV(format)) { |
| res = buffer->lockAsyncYCbCr(inUsage, rect, &ycbcr, fenceFd); |
| |
| if (res != OK) { |
| ALOGW("lockAsyncYCbCr failed with error %d (format = 0x%x)", res, format); |
| } |
| |
| pData = ycbcr.y; |
| flexFormat = HAL_PIXEL_FORMAT_YCbCr_420_888; |
| } |
| |
| // lockAsyncYCbCr for YUV is unsuccessful. |
| if (pData == NULL) { |
| res = buffer->lockAsync(inUsage, rect, &pData, fenceFd); |
| if (res != OK) { |
| ALOGE("Lock buffer failed!"); |
| return res; |
| } |
| if (isPossibly10BitYUV(format) |
| && OK == extractP010Gralloc4PlaneLayout(buffer, pData, format, outputImage)) { |
| ALOGV("%s: Successfully locked the P010 image", __FUNCTION__); |
| return OK; |
| } |
| } |
| |
| outputImage->data = reinterpret_cast<uint8_t*>(pData); |
| outputImage->width = buffer->getWidth(); |
| outputImage->height = buffer->getHeight(); |
| outputImage->format = format; |
| outputImage->flexFormat = flexFormat; |
| outputImage->stride = |
| (ycbcr.y != NULL) ? static_cast<uint32_t>(ycbcr.ystride) : buffer->getStride(); |
| |
| outputImage->dataCb = reinterpret_cast<uint8_t*>(ycbcr.cb); |
| outputImage->dataCr = reinterpret_cast<uint8_t*>(ycbcr.cr); |
| outputImage->chromaStride = static_cast<uint32_t>(ycbcr.cstride); |
| outputImage->chromaStep = static_cast<uint32_t>(ycbcr.chroma_step); |
| ALOGV("%s: Successfully locked the image from the GraphicBuffer", __FUNCTION__); |
| // Crop, transform, scalingMode, timestamp, and frameNumber should be set by caller, |
| // and cann't be set them here. |
| return OK; |
| } |
| |
| status_t lockImageFromBuffer(BufferItem* bufferItem, uint32_t inUsage, |
| int fenceFd, LockedImage* outputImage) { |
| ALOGV("%s: Try to lock the BufferItem", __FUNCTION__); |
| if (bufferItem == nullptr || outputImage == nullptr) { |
| ALOGE("Input BufferItem or output LockedImage is NULL!"); |
| return BAD_VALUE; |
| } |
| |
| status_t res = lockImageFromBuffer(bufferItem->mGraphicBuffer, inUsage, bufferItem->mCrop, |
| fenceFd, outputImage); |
| if (res != OK) { |
| ALOGE("%s: lock graphic buffer failed", __FUNCTION__); |
| return res; |
| } |
| |
| outputImage->crop = bufferItem->mCrop; |
| outputImage->transform = bufferItem->mTransform; |
| outputImage->scalingMode = bufferItem->mScalingMode; |
| outputImage->timestamp = bufferItem->mTimestamp; |
| outputImage->dataSpace = bufferItem->mDataSpace; |
| outputImage->frameNumber = bufferItem->mFrameNumber; |
| ALOGV("%s: Successfully locked the image from the BufferItem", __FUNCTION__); |
| return OK; |
| } |
| |
| int getBufferWidth(BufferItem* buffer) { |
| if (buffer == NULL) return -1; |
| |
| if (!buffer->mCrop.isEmpty()) { |
| return buffer->mCrop.getWidth(); |
| } |
| |
| ALOGV("%s: buffer->mGraphicBuffer: %p", __FUNCTION__, buffer->mGraphicBuffer.get()); |
| return buffer->mGraphicBuffer->getWidth(); |
| } |
| |
| int getBufferHeight(BufferItem* buffer) { |
| if (buffer == NULL) return -1; |
| |
| if (!buffer->mCrop.isEmpty()) { |
| return buffer->mCrop.getHeight(); |
| } |
| |
| ALOGV("%s: buffer->mGraphicBuffer: %p", __FUNCTION__, buffer->mGraphicBuffer.get()); |
| return buffer->mGraphicBuffer->getHeight(); |
| } |
| |
| } // namespace android |
| |