| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.graphics.drawable; |
| |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.compat.annotation.UnsupportedAppUsage; |
| import android.content.pm.ActivityInfo.Config; |
| import android.content.res.ColorStateList; |
| import android.content.res.Resources; |
| import android.content.res.Resources.Theme; |
| import android.content.res.TypedArray; |
| import android.graphics.Bitmap; |
| import android.graphics.BitmapShader; |
| import android.graphics.Canvas; |
| import android.graphics.Color; |
| import android.graphics.Matrix; |
| import android.graphics.Outline; |
| import android.graphics.Paint; |
| import android.graphics.PixelFormat; |
| import android.graphics.PorterDuff; |
| import android.graphics.PorterDuffColorFilter; |
| import android.graphics.Rect; |
| import android.graphics.Shader; |
| import android.util.AttributeSet; |
| |
| import com.android.internal.R; |
| |
| import org.xmlpull.v1.XmlPullParser; |
| import org.xmlpull.v1.XmlPullParserException; |
| |
| import java.io.IOException; |
| import java.util.Arrays; |
| |
| /** |
| * Drawable that shows a ripple effect in response to state changes. The |
| * anchoring position of the ripple for a given state may be specified by |
| * calling {@link #setHotspot(float, float)} with the corresponding state |
| * attribute identifier. |
| * <p> |
| * A touch feedback drawable may contain multiple child layers, including a |
| * special mask layer that is not drawn to the screen. A single layer may be |
| * set as the mask from XML by specifying its {@code android:id} value as |
| * {@link android.R.id#mask}. At run time, a single layer may be set as the |
| * mask using {@code setId(..., android.R.id.mask)} or an existing mask layer |
| * may be replaced using {@code setDrawableByLayerId(android.R.id.mask, ...)}. |
| * <pre> |
| * <code><!-- A red ripple masked against an opaque rectangle. --/> |
| * <ripple android:color="#ffff0000"> |
| * <item android:id="@android:id/mask" |
| * android:drawable="@android:color/white" /> |
| * </ripple></code> |
| * </pre> |
| * <p> |
| * If a mask layer is set, the ripple effect will be masked against that layer |
| * before it is drawn over the composite of the remaining child layers. |
| * <p> |
| * If no mask layer is set, the ripple effect is masked against the composite |
| * of the child layers. |
| * <pre> |
| * <code><!-- A green ripple drawn atop a black rectangle. --/> |
| * <ripple android:color="#ff00ff00"> |
| * <item android:drawable="@android:color/black" /> |
| * </ripple> |
| * |
| * <!-- A blue ripple drawn atop a drawable resource. --/> |
| * <ripple android:color="#ff0000ff"> |
| * <item android:drawable="@drawable/my_drawable" /> |
| * </ripple></code> |
| * </pre> |
| * <p> |
| * If no child layers or mask is specified and the ripple is set as a View |
| * background, the ripple will be drawn atop the first available parent |
| * background within the View's hierarchy. In this case, the drawing region |
| * may extend outside of the Drawable bounds. |
| * <pre> |
| * <code><!-- An unbounded red ripple. --/> |
| * <ripple android:color="#ffff0000" /></code> |
| * </pre> |
| * |
| * @attr ref android.R.styleable#RippleDrawable_color |
| */ |
| public class RippleDrawable extends LayerDrawable { |
| /** |
| * Radius value that specifies the ripple radius should be computed based |
| * on the size of the ripple's container. |
| */ |
| public static final int RADIUS_AUTO = -1; |
| |
| private static final int MASK_UNKNOWN = -1; |
| private static final int MASK_NONE = 0; |
| private static final int MASK_CONTENT = 1; |
| private static final int MASK_EXPLICIT = 2; |
| |
| /** The maximum number of ripples supported. */ |
| private static final int MAX_RIPPLES = 10; |
| |
| private final Rect mTempRect = new Rect(); |
| |
| /** Current ripple effect bounds, used to constrain ripple effects. */ |
| private final Rect mHotspotBounds = new Rect(); |
| |
| /** Current drawing bounds, used to compute dirty region. */ |
| private final Rect mDrawingBounds = new Rect(); |
| |
| /** Current dirty bounds, union of current and previous drawing bounds. */ |
| private final Rect mDirtyBounds = new Rect(); |
| |
| /** Mirrors mLayerState with some extra information. */ |
| @UnsupportedAppUsage |
| private RippleState mState; |
| |
| /** The masking layer, e.g. the layer with id R.id.mask. */ |
| private Drawable mMask; |
| |
| /** The current background. May be actively animating or pending entry. */ |
| private RippleBackground mBackground; |
| |
| private Bitmap mMaskBuffer; |
| private BitmapShader mMaskShader; |
| private Canvas mMaskCanvas; |
| private Matrix mMaskMatrix; |
| private PorterDuffColorFilter mMaskColorFilter; |
| private boolean mHasValidMask; |
| |
| /** The current ripple. May be actively animating or pending entry. */ |
| private RippleForeground mRipple; |
| |
| /** Whether we expect to draw a ripple when visible. */ |
| private boolean mRippleActive; |
| |
| // Hotspot coordinates that are awaiting activation. |
| private float mPendingX; |
| private float mPendingY; |
| private boolean mHasPending; |
| |
| /** |
| * Lazily-created array of actively animating ripples. Inactive ripples are |
| * pruned during draw(). The locations of these will not change. |
| */ |
| private RippleForeground[] mExitingRipples; |
| private int mExitingRipplesCount = 0; |
| |
| /** Paint used to control appearance of ripples. */ |
| private Paint mRipplePaint; |
| |
| /** Target density of the display into which ripples are drawn. */ |
| @UnsupportedAppUsage |
| private int mDensity; |
| |
| /** Whether bounds are being overridden. */ |
| private boolean mOverrideBounds; |
| |
| /** |
| * If set, force all ripple animations to not run on RenderThread, even if it would be |
| * available. |
| */ |
| private boolean mForceSoftware; |
| |
| /** |
| * Constructor used for drawable inflation. |
| */ |
| RippleDrawable() { |
| this(new RippleState(null, null, null), null); |
| } |
| |
| /** |
| * Creates a new ripple drawable with the specified ripple color and |
| * optional content and mask drawables. |
| * |
| * @param color The ripple color |
| * @param content The content drawable, may be {@code null} |
| * @param mask The mask drawable, may be {@code null} |
| */ |
| public RippleDrawable(@NonNull ColorStateList color, @Nullable Drawable content, |
| @Nullable Drawable mask) { |
| this(new RippleState(null, null, null), null); |
| |
| if (color == null) { |
| throw new IllegalArgumentException("RippleDrawable requires a non-null color"); |
| } |
| |
| if (content != null) { |
| addLayer(content, null, 0, 0, 0, 0, 0); |
| } |
| |
| if (mask != null) { |
| addLayer(mask, null, android.R.id.mask, 0, 0, 0, 0); |
| } |
| |
| setColor(color); |
| ensurePadding(); |
| refreshPadding(); |
| updateLocalState(); |
| } |
| |
| @Override |
| public void jumpToCurrentState() { |
| super.jumpToCurrentState(); |
| |
| if (mRipple != null) { |
| mRipple.end(); |
| } |
| |
| if (mBackground != null) { |
| mBackground.jumpToFinal(); |
| } |
| |
| cancelExitingRipples(); |
| } |
| |
| private void cancelExitingRipples() { |
| final int count = mExitingRipplesCount; |
| final RippleForeground[] ripples = mExitingRipples; |
| for (int i = 0; i < count; i++) { |
| ripples[i].end(); |
| } |
| |
| if (ripples != null) { |
| Arrays.fill(ripples, 0, count, null); |
| } |
| mExitingRipplesCount = 0; |
| |
| // Always draw an additional "clean" frame after canceling animations. |
| invalidateSelf(false); |
| } |
| |
| @Override |
| public int getOpacity() { |
| // Worst-case scenario. |
| return PixelFormat.TRANSLUCENT; |
| } |
| |
| @Override |
| protected boolean onStateChange(int[] stateSet) { |
| final boolean changed = super.onStateChange(stateSet); |
| |
| boolean enabled = false; |
| boolean pressed = false; |
| boolean focused = false; |
| boolean hovered = false; |
| |
| for (int state : stateSet) { |
| if (state == R.attr.state_enabled) { |
| enabled = true; |
| } else if (state == R.attr.state_focused) { |
| focused = true; |
| } else if (state == R.attr.state_pressed) { |
| pressed = true; |
| } else if (state == R.attr.state_hovered) { |
| hovered = true; |
| } |
| } |
| |
| setRippleActive(enabled && pressed); |
| setBackgroundActive(hovered, focused, pressed); |
| |
| return changed; |
| } |
| |
| private void setRippleActive(boolean active) { |
| if (mRippleActive != active) { |
| mRippleActive = active; |
| if (active) { |
| tryRippleEnter(); |
| } else { |
| tryRippleExit(); |
| } |
| } |
| } |
| |
| private void setBackgroundActive(boolean hovered, boolean focused, boolean pressed) { |
| if (mBackground == null && (hovered || focused)) { |
| mBackground = new RippleBackground(this, mHotspotBounds, isBounded()); |
| mBackground.setup(mState.mMaxRadius, mDensity); |
| } |
| if (mBackground != null) { |
| mBackground.setState(focused, hovered, pressed); |
| } |
| } |
| |
| @Override |
| protected void onBoundsChange(Rect bounds) { |
| super.onBoundsChange(bounds); |
| |
| if (!mOverrideBounds) { |
| mHotspotBounds.set(bounds); |
| onHotspotBoundsChanged(); |
| } |
| |
| final int count = mExitingRipplesCount; |
| final RippleForeground[] ripples = mExitingRipples; |
| for (int i = 0; i < count; i++) { |
| ripples[i].onBoundsChange(); |
| } |
| |
| if (mBackground != null) { |
| mBackground.onBoundsChange(); |
| } |
| |
| if (mRipple != null) { |
| mRipple.onBoundsChange(); |
| } |
| |
| invalidateSelf(); |
| } |
| |
| @Override |
| public boolean setVisible(boolean visible, boolean restart) { |
| final boolean changed = super.setVisible(visible, restart); |
| |
| if (!visible) { |
| clearHotspots(); |
| } else if (changed) { |
| // If we just became visible, ensure the background and ripple |
| // visibilities are consistent with their internal states. |
| if (mRippleActive) { |
| tryRippleEnter(); |
| } |
| |
| // Skip animations, just show the correct final states. |
| jumpToCurrentState(); |
| } |
| |
| return changed; |
| } |
| |
| /** |
| * @hide |
| */ |
| @Override |
| public boolean isProjected() { |
| // If the layer is bounded, then we don't need to project. |
| if (isBounded()) { |
| return false; |
| } |
| |
| // Otherwise, if the maximum radius is contained entirely within the |
| // bounds then we don't need to project. This is sort of a hack to |
| // prevent check box ripples from being projected across the edges of |
| // scroll views. It does not impact rendering performance, and it can |
| // be removed once we have better handling of projection in scrollable |
| // views. |
| final int radius = mState.mMaxRadius; |
| final Rect drawableBounds = getBounds(); |
| final Rect hotspotBounds = mHotspotBounds; |
| if (radius != RADIUS_AUTO |
| && radius <= hotspotBounds.width() / 2 |
| && radius <= hotspotBounds.height() / 2 |
| && (drawableBounds.equals(hotspotBounds) |
| || drawableBounds.contains(hotspotBounds))) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| private boolean isBounded() { |
| return getNumberOfLayers() > 0; |
| } |
| |
| @Override |
| public boolean isStateful() { |
| return true; |
| } |
| |
| /** @hide */ |
| @Override |
| public boolean hasFocusStateSpecified() { |
| return true; |
| } |
| |
| /** |
| * Sets the ripple color. |
| * |
| * @param color Ripple color as a color state list. |
| * |
| * @attr ref android.R.styleable#RippleDrawable_color |
| */ |
| public void setColor(ColorStateList color) { |
| mState.mColor = color; |
| invalidateSelf(false); |
| } |
| |
| /** |
| * Sets the radius in pixels of the fully expanded ripple. |
| * |
| * @param radius ripple radius in pixels, or {@link #RADIUS_AUTO} to |
| * compute the radius based on the container size |
| * @attr ref android.R.styleable#RippleDrawable_radius |
| */ |
| public void setRadius(int radius) { |
| mState.mMaxRadius = radius; |
| invalidateSelf(false); |
| } |
| |
| /** |
| * @return the radius in pixels of the fully expanded ripple if an explicit |
| * radius has been set, or {@link #RADIUS_AUTO} if the radius is |
| * computed based on the container size |
| * @attr ref android.R.styleable#RippleDrawable_radius |
| */ |
| public int getRadius() { |
| return mState.mMaxRadius; |
| } |
| |
| @Override |
| public void inflate(@NonNull Resources r, @NonNull XmlPullParser parser, |
| @NonNull AttributeSet attrs, @Nullable Theme theme) |
| throws XmlPullParserException, IOException { |
| final TypedArray a = obtainAttributes(r, theme, attrs, R.styleable.RippleDrawable); |
| |
| // Force padding default to STACK before inflating. |
| setPaddingMode(PADDING_MODE_STACK); |
| |
| // Inflation will advance the XmlPullParser and AttributeSet. |
| super.inflate(r, parser, attrs, theme); |
| |
| updateStateFromTypedArray(a); |
| verifyRequiredAttributes(a); |
| a.recycle(); |
| |
| updateLocalState(); |
| } |
| |
| @Override |
| public boolean setDrawableByLayerId(int id, Drawable drawable) { |
| if (super.setDrawableByLayerId(id, drawable)) { |
| if (id == R.id.mask) { |
| mMask = drawable; |
| mHasValidMask = false; |
| } |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * Specifies how layer padding should affect the bounds of subsequent |
| * layers. The default and recommended value for RippleDrawable is |
| * {@link #PADDING_MODE_STACK}. |
| * |
| * @param mode padding mode, one of: |
| * <ul> |
| * <li>{@link #PADDING_MODE_NEST} to nest each layer inside the |
| * padding of the previous layer |
| * <li>{@link #PADDING_MODE_STACK} to stack each layer directly |
| * atop the previous layer |
| * </ul> |
| * @see #getPaddingMode() |
| */ |
| @Override |
| public void setPaddingMode(int mode) { |
| super.setPaddingMode(mode); |
| } |
| |
| /** |
| * Initializes the constant state from the values in the typed array. |
| */ |
| private void updateStateFromTypedArray(@NonNull TypedArray a) throws XmlPullParserException { |
| final RippleState state = mState; |
| |
| // Account for any configuration changes. |
| state.mChangingConfigurations |= a.getChangingConfigurations(); |
| |
| // Extract the theme attributes, if any. |
| state.mTouchThemeAttrs = a.extractThemeAttrs(); |
| |
| final ColorStateList color = a.getColorStateList(R.styleable.RippleDrawable_color); |
| if (color != null) { |
| mState.mColor = color; |
| } |
| |
| mState.mMaxRadius = a.getDimensionPixelSize( |
| R.styleable.RippleDrawable_radius, mState.mMaxRadius); |
| } |
| |
| private void verifyRequiredAttributes(@NonNull TypedArray a) throws XmlPullParserException { |
| if (mState.mColor == null && (mState.mTouchThemeAttrs == null |
| || mState.mTouchThemeAttrs[R.styleable.RippleDrawable_color] == 0)) { |
| throw new XmlPullParserException(a.getPositionDescription() + |
| ": <ripple> requires a valid color attribute"); |
| } |
| } |
| |
| @Override |
| public void applyTheme(@NonNull Theme t) { |
| super.applyTheme(t); |
| |
| final RippleState state = mState; |
| if (state == null) { |
| return; |
| } |
| |
| if (state.mTouchThemeAttrs != null) { |
| final TypedArray a = t.resolveAttributes(state.mTouchThemeAttrs, |
| R.styleable.RippleDrawable); |
| try { |
| updateStateFromTypedArray(a); |
| verifyRequiredAttributes(a); |
| } catch (XmlPullParserException e) { |
| rethrowAsRuntimeException(e); |
| } finally { |
| a.recycle(); |
| } |
| } |
| |
| if (state.mColor != null && state.mColor.canApplyTheme()) { |
| state.mColor = state.mColor.obtainForTheme(t); |
| } |
| |
| updateLocalState(); |
| } |
| |
| @Override |
| public boolean canApplyTheme() { |
| return (mState != null && mState.canApplyTheme()) || super.canApplyTheme(); |
| } |
| |
| @Override |
| public void setHotspot(float x, float y) { |
| if (mRipple == null || mBackground == null) { |
| mPendingX = x; |
| mPendingY = y; |
| mHasPending = true; |
| } |
| |
| if (mRipple != null) { |
| mRipple.move(x, y); |
| } |
| } |
| |
| /** |
| * Attempts to start an enter animation for the active hotspot. Fails if |
| * there are too many animating ripples. |
| */ |
| private void tryRippleEnter() { |
| if (mExitingRipplesCount >= MAX_RIPPLES) { |
| // This should never happen unless the user is tapping like a maniac |
| // or there is a bug that's preventing ripples from being removed. |
| return; |
| } |
| |
| if (mRipple == null) { |
| final float x; |
| final float y; |
| if (mHasPending) { |
| mHasPending = false; |
| x = mPendingX; |
| y = mPendingY; |
| } else { |
| x = mHotspotBounds.exactCenterX(); |
| y = mHotspotBounds.exactCenterY(); |
| } |
| |
| mRipple = new RippleForeground(this, mHotspotBounds, x, y, mForceSoftware); |
| } |
| |
| mRipple.setup(mState.mMaxRadius, mDensity); |
| mRipple.enter(); |
| } |
| |
| /** |
| * Attempts to start an exit animation for the active hotspot. Fails if |
| * there is no active hotspot. |
| */ |
| private void tryRippleExit() { |
| if (mRipple != null) { |
| if (mExitingRipples == null) { |
| mExitingRipples = new RippleForeground[MAX_RIPPLES]; |
| } |
| mExitingRipples[mExitingRipplesCount++] = mRipple; |
| mRipple.exit(); |
| mRipple = null; |
| } |
| } |
| |
| /** |
| * Cancels and removes the active ripple, all exiting ripples, and the |
| * background. Nothing will be drawn after this method is called. |
| */ |
| private void clearHotspots() { |
| if (mRipple != null) { |
| mRipple.end(); |
| mRipple = null; |
| mRippleActive = false; |
| } |
| |
| if (mBackground != null) { |
| mBackground.setState(false, false, false); |
| } |
| |
| cancelExitingRipples(); |
| } |
| |
| @Override |
| public void setHotspotBounds(int left, int top, int right, int bottom) { |
| mOverrideBounds = true; |
| mHotspotBounds.set(left, top, right, bottom); |
| |
| onHotspotBoundsChanged(); |
| } |
| |
| @Override |
| public void getHotspotBounds(Rect outRect) { |
| outRect.set(mHotspotBounds); |
| } |
| |
| /** |
| * Notifies all the animating ripples that the hotspot bounds have changed. |
| */ |
| private void onHotspotBoundsChanged() { |
| final int count = mExitingRipplesCount; |
| final RippleForeground[] ripples = mExitingRipples; |
| for (int i = 0; i < count; i++) { |
| ripples[i].onHotspotBoundsChanged(); |
| } |
| |
| if (mRipple != null) { |
| mRipple.onHotspotBoundsChanged(); |
| } |
| |
| if (mBackground != null) { |
| mBackground.onHotspotBoundsChanged(); |
| } |
| } |
| |
| /** |
| * Populates <code>outline</code> with the first available layer outline, |
| * excluding the mask layer. |
| * |
| * @param outline Outline in which to place the first available layer outline |
| */ |
| @Override |
| public void getOutline(@NonNull Outline outline) { |
| final LayerState state = mLayerState; |
| final ChildDrawable[] children = state.mChildren; |
| final int N = state.mNumChildren; |
| for (int i = 0; i < N; i++) { |
| if (children[i].mId != R.id.mask) { |
| children[i].mDrawable.getOutline(outline); |
| if (!outline.isEmpty()) return; |
| } |
| } |
| } |
| |
| /** |
| * Optimized for drawing ripples with a mask layer and optional content. |
| */ |
| @Override |
| public void draw(@NonNull Canvas canvas) { |
| pruneRipples(); |
| |
| // Clip to the dirty bounds, which will be the drawable bounds if we |
| // have a mask or content and the ripple bounds if we're projecting. |
| final Rect bounds = getDirtyBounds(); |
| final int saveCount = canvas.save(Canvas.CLIP_SAVE_FLAG); |
| if (isBounded()) { |
| canvas.clipRect(bounds); |
| } |
| |
| drawContent(canvas); |
| drawBackgroundAndRipples(canvas); |
| |
| canvas.restoreToCount(saveCount); |
| } |
| |
| @Override |
| public void invalidateSelf() { |
| invalidateSelf(true); |
| } |
| |
| void invalidateSelf(boolean invalidateMask) { |
| super.invalidateSelf(); |
| |
| if (invalidateMask) { |
| // Force the mask to update on the next draw(). |
| mHasValidMask = false; |
| } |
| |
| } |
| |
| private void pruneRipples() { |
| int remaining = 0; |
| |
| // Move remaining entries into pruned spaces. |
| final RippleForeground[] ripples = mExitingRipples; |
| final int count = mExitingRipplesCount; |
| for (int i = 0; i < count; i++) { |
| if (!ripples[i].hasFinishedExit()) { |
| ripples[remaining++] = ripples[i]; |
| } |
| } |
| |
| // Null out the remaining entries. |
| for (int i = remaining; i < count; i++) { |
| ripples[i] = null; |
| } |
| |
| mExitingRipplesCount = remaining; |
| } |
| |
| /** |
| * @return whether we need to use a mask |
| */ |
| private void updateMaskShaderIfNeeded() { |
| if (mHasValidMask) { |
| return; |
| } |
| |
| final int maskType = getMaskType(); |
| if (maskType == MASK_UNKNOWN) { |
| return; |
| } |
| |
| mHasValidMask = true; |
| |
| final Rect bounds = getBounds(); |
| if (maskType == MASK_NONE || bounds.isEmpty()) { |
| if (mMaskBuffer != null) { |
| mMaskBuffer.recycle(); |
| mMaskBuffer = null; |
| mMaskShader = null; |
| mMaskCanvas = null; |
| } |
| mMaskMatrix = null; |
| mMaskColorFilter = null; |
| return; |
| } |
| |
| // Ensure we have a correctly-sized buffer. |
| if (mMaskBuffer == null |
| || mMaskBuffer.getWidth() != bounds.width() |
| || mMaskBuffer.getHeight() != bounds.height()) { |
| if (mMaskBuffer != null) { |
| mMaskBuffer.recycle(); |
| } |
| |
| mMaskBuffer = Bitmap.createBitmap( |
| bounds.width(), bounds.height(), Bitmap.Config.ALPHA_8); |
| mMaskShader = new BitmapShader(mMaskBuffer, |
| Shader.TileMode.CLAMP, Shader.TileMode.CLAMP); |
| mMaskCanvas = new Canvas(mMaskBuffer); |
| } else { |
| mMaskBuffer.eraseColor(Color.TRANSPARENT); |
| } |
| |
| if (mMaskMatrix == null) { |
| mMaskMatrix = new Matrix(); |
| } else { |
| mMaskMatrix.reset(); |
| } |
| |
| if (mMaskColorFilter == null) { |
| mMaskColorFilter = new PorterDuffColorFilter(0, PorterDuff.Mode.SRC_IN); |
| } |
| |
| // Draw the appropriate mask anchored to (0,0). |
| final int left = bounds.left; |
| final int top = bounds.top; |
| mMaskCanvas.translate(-left, -top); |
| if (maskType == MASK_EXPLICIT) { |
| drawMask(mMaskCanvas); |
| } else if (maskType == MASK_CONTENT) { |
| drawContent(mMaskCanvas); |
| } |
| mMaskCanvas.translate(left, top); |
| } |
| |
| private int getMaskType() { |
| if (mRipple == null && mExitingRipplesCount <= 0 |
| && (mBackground == null || !mBackground.isVisible())) { |
| // We might need a mask later. |
| return MASK_UNKNOWN; |
| } |
| |
| if (mMask != null) { |
| if (mMask.getOpacity() == PixelFormat.OPAQUE) { |
| // Clipping handles opaque explicit masks. |
| return MASK_NONE; |
| } else { |
| return MASK_EXPLICIT; |
| } |
| } |
| |
| // Check for non-opaque, non-mask content. |
| final ChildDrawable[] array = mLayerState.mChildren; |
| final int count = mLayerState.mNumChildren; |
| for (int i = 0; i < count; i++) { |
| if (array[i].mDrawable.getOpacity() != PixelFormat.OPAQUE) { |
| return MASK_CONTENT; |
| } |
| } |
| |
| // Clipping handles opaque content. |
| return MASK_NONE; |
| } |
| |
| private void drawContent(Canvas canvas) { |
| // Draw everything except the mask. |
| final ChildDrawable[] array = mLayerState.mChildren; |
| final int count = mLayerState.mNumChildren; |
| for (int i = 0; i < count; i++) { |
| if (array[i].mId != R.id.mask) { |
| array[i].mDrawable.draw(canvas); |
| } |
| } |
| } |
| |
| private void drawBackgroundAndRipples(Canvas canvas) { |
| final RippleForeground active = mRipple; |
| final RippleBackground background = mBackground; |
| final int count = mExitingRipplesCount; |
| if (active == null && count <= 0 && (background == null || !background.isVisible())) { |
| // Move along, nothing to draw here. |
| return; |
| } |
| |
| final float x = mHotspotBounds.exactCenterX(); |
| final float y = mHotspotBounds.exactCenterY(); |
| canvas.translate(x, y); |
| |
| final Paint p = getRipplePaint(); |
| |
| if (background != null && background.isVisible()) { |
| background.draw(canvas, p); |
| } |
| |
| if (count > 0) { |
| final RippleForeground[] ripples = mExitingRipples; |
| for (int i = 0; i < count; i++) { |
| ripples[i].draw(canvas, p); |
| } |
| } |
| |
| if (active != null) { |
| active.draw(canvas, p); |
| } |
| |
| canvas.translate(-x, -y); |
| } |
| |
| private void drawMask(Canvas canvas) { |
| mMask.draw(canvas); |
| } |
| |
| @UnsupportedAppUsage |
| Paint getRipplePaint() { |
| if (mRipplePaint == null) { |
| mRipplePaint = new Paint(); |
| mRipplePaint.setAntiAlias(true); |
| mRipplePaint.setStyle(Paint.Style.FILL); |
| } |
| |
| final float x = mHotspotBounds.exactCenterX(); |
| final float y = mHotspotBounds.exactCenterY(); |
| |
| updateMaskShaderIfNeeded(); |
| |
| // Position the shader to account for canvas translation. |
| if (mMaskShader != null) { |
| final Rect bounds = getBounds(); |
| mMaskMatrix.setTranslate(bounds.left - x, bounds.top - y); |
| mMaskShader.setLocalMatrix(mMaskMatrix); |
| } |
| |
| // Grab the color for the current state and cut the alpha channel in |
| // half so that the ripple and background together yield full alpha. |
| int color = mState.mColor.getColorForState(getState(), Color.BLACK); |
| if (Color.alpha(color) > 128) { |
| color = (color & 0x00FFFFFF) | 0x80000000; |
| } |
| final Paint p = mRipplePaint; |
| |
| if (mMaskColorFilter != null) { |
| // The ripple timing depends on the paint's alpha value, so we need |
| // to push just the alpha channel into the paint and let the filter |
| // handle the full-alpha color. |
| int maskColor = color | 0xFF000000; |
| if (mMaskColorFilter.getColor() != maskColor) { |
| mMaskColorFilter = new PorterDuffColorFilter(maskColor, mMaskColorFilter.getMode()); |
| } |
| p.setColor(color & 0xFF000000); |
| p.setColorFilter(mMaskColorFilter); |
| p.setShader(mMaskShader); |
| } else { |
| p.setColor(color); |
| p.setColorFilter(null); |
| p.setShader(null); |
| } |
| |
| return p; |
| } |
| |
| @Override |
| public Rect getDirtyBounds() { |
| if (!isBounded()) { |
| final Rect drawingBounds = mDrawingBounds; |
| final Rect dirtyBounds = mDirtyBounds; |
| dirtyBounds.set(drawingBounds); |
| drawingBounds.setEmpty(); |
| |
| final int cX = (int) mHotspotBounds.exactCenterX(); |
| final int cY = (int) mHotspotBounds.exactCenterY(); |
| final Rect rippleBounds = mTempRect; |
| |
| final RippleForeground[] activeRipples = mExitingRipples; |
| final int N = mExitingRipplesCount; |
| for (int i = 0; i < N; i++) { |
| activeRipples[i].getBounds(rippleBounds); |
| rippleBounds.offset(cX, cY); |
| drawingBounds.union(rippleBounds); |
| } |
| |
| final RippleBackground background = mBackground; |
| if (background != null) { |
| background.getBounds(rippleBounds); |
| rippleBounds.offset(cX, cY); |
| drawingBounds.union(rippleBounds); |
| } |
| |
| dirtyBounds.union(drawingBounds); |
| dirtyBounds.union(super.getDirtyBounds()); |
| return dirtyBounds; |
| } else { |
| return getBounds(); |
| } |
| } |
| |
| /** |
| * Sets whether to disable RenderThread animations for this ripple. |
| * |
| * @param forceSoftware true if RenderThread animations should be disabled, false otherwise |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public void setForceSoftware(boolean forceSoftware) { |
| mForceSoftware = forceSoftware; |
| } |
| |
| @Override |
| public ConstantState getConstantState() { |
| return mState; |
| } |
| |
| @Override |
| public Drawable mutate() { |
| super.mutate(); |
| |
| // LayerDrawable creates a new state using createConstantState, so |
| // this should always be a safe cast. |
| mState = (RippleState) mLayerState; |
| |
| // The locally cached drawable may have changed. |
| mMask = findDrawableByLayerId(R.id.mask); |
| |
| return this; |
| } |
| |
| @Override |
| RippleState createConstantState(LayerState state, Resources res) { |
| return new RippleState(state, this, res); |
| } |
| |
| static class RippleState extends LayerState { |
| int[] mTouchThemeAttrs; |
| @UnsupportedAppUsage |
| ColorStateList mColor = ColorStateList.valueOf(Color.MAGENTA); |
| int mMaxRadius = RADIUS_AUTO; |
| |
| public RippleState(LayerState orig, RippleDrawable owner, Resources res) { |
| super(orig, owner, res); |
| |
| if (orig != null && orig instanceof RippleState) { |
| final RippleState origs = (RippleState) orig; |
| mTouchThemeAttrs = origs.mTouchThemeAttrs; |
| mColor = origs.mColor; |
| mMaxRadius = origs.mMaxRadius; |
| |
| if (origs.mDensity != mDensity) { |
| applyDensityScaling(orig.mDensity, mDensity); |
| } |
| } |
| } |
| |
| @Override |
| protected void onDensityChanged(int sourceDensity, int targetDensity) { |
| super.onDensityChanged(sourceDensity, targetDensity); |
| |
| applyDensityScaling(sourceDensity, targetDensity); |
| } |
| |
| private void applyDensityScaling(int sourceDensity, int targetDensity) { |
| if (mMaxRadius != RADIUS_AUTO) { |
| mMaxRadius = Drawable.scaleFromDensity( |
| mMaxRadius, sourceDensity, targetDensity, true); |
| } |
| } |
| |
| @Override |
| public boolean canApplyTheme() { |
| return mTouchThemeAttrs != null |
| || (mColor != null && mColor.canApplyTheme()) |
| || super.canApplyTheme(); |
| } |
| |
| @Override |
| public Drawable newDrawable() { |
| return new RippleDrawable(this, null); |
| } |
| |
| @Override |
| public Drawable newDrawable(Resources res) { |
| return new RippleDrawable(this, res); |
| } |
| |
| @Override |
| public @Config int getChangingConfigurations() { |
| return super.getChangingConfigurations() |
| | (mColor != null ? mColor.getChangingConfigurations() : 0); |
| } |
| } |
| |
| private RippleDrawable(RippleState state, Resources res) { |
| mState = new RippleState(state, this, res); |
| mLayerState = mState; |
| mDensity = Drawable.resolveDensity(res, mState.mDensity); |
| |
| if (mState.mNumChildren > 0) { |
| ensurePadding(); |
| refreshPadding(); |
| } |
| |
| updateLocalState(); |
| } |
| |
| private void updateLocalState() { |
| // Initialize from constant state. |
| mMask = findDrawableByLayerId(R.id.mask); |
| } |
| } |