libs/hwui/tests/scripts/prep_generic.sh - LeafOS-Project/android_frameworks_base - Gitiles

 #
 # Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 #################################################################
 ###
 ###  DO NOT MODIFY THIS FILE
 ###  This is a copy of androidx's benchmark/lockClocks.sh
 ###  Make changes there instead then copy here!
 ###
 #################################################################

 # This script can be used to lock device clocks to stable levels for comparing
 # different versions of software.  Since the clock levels are not necessarily
 # indicative of real world behavior, this should **never** be used to compare
 # performance between different device models.

 # Fun notes for maintaining this file:
 #      `expr` can deal with ints > INT32_MAX, but if compares cannot. This is why we use MHz.
 #      `expr` can sometimes evaluate right-to-left. This is why we use parens.
 #      Everything below the initial host-check isn't bash - Android uses mksh
 #      mksh allows `\n` in an echo, bash doesn't
 #      can't use `awk`

 CPU_TARGET_FREQ_PERCENT=50
 GPU_TARGET_FREQ_PERCENT=50

 if [ "`command -v getprop`" == "" ]; then
     if [ -n "`command -v adb`" ]; then
         echo ""
         echo "Pushing $0 and running it on device..."
         dest=/data/local/tmp/`basename $0`
         adb push $0 ${dest}
         adb shell ${dest}
         adb shell rm ${dest}
         exit
     else
         echo "Could not find adb. Options are:"
         echo "  1. Ensure adb is on your \$PATH"
         echo "  2. Use './gradlew lockClocks'"
         echo "  3. Manually adb push this script to your device, and run it there"
         exit -1
     fi
 fi

 # require root
 if [ "`id -u`" -ne "0" ]; then
     echo "Not running as root, cannot lock clocks, aborting"
     exit -1
 fi

 DEVICE=`getprop ro.product.device`
 MODEL=`getprop ro.product.model`

 # Find CPU max frequency, and lock big cores to an available frequency
 # that's >= $CPU_TARGET_FREQ_PERCENT% of max. Disable other cores.
 function_lock_cpu() {
     CPU_BASE=/sys/devices/system/cpu
     GOV=cpufreq/scaling_governor

     # Find max CPU freq, and associated list of available freqs
     cpuMaxFreq=0
     cpuAvailFreqCmpr=0
     cpuAvailFreq=0
     enableIndices=''
     disableIndices=''
     cpu=0
     while [ -f ${CPU_BASE}/cpu${cpu}/online ]; do
         # enable core, so we can find its frequencies
         echo 1 > ${CPU_BASE}/cpu${cpu}/online

         maxFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/cpuinfo_max_freq`
         availFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/scaling_available_frequencies`
         availFreqCmpr=${availFreq// /-}

         if [ ${maxFreq} -gt ${cpuMaxFreq} ]; then
             # new highest max freq, look for cpus with same max freq and same avail freq list
             cpuMaxFreq=${maxFreq}
             cpuAvailFreq=${availFreq}
             cpuAvailFreqCmpr=${availFreqCmpr}

             if [ -z ${disableIndices} ]; then
                 disableIndices="$enableIndices"
             else
                 disableIndices="$disableIndices $enableIndices"
             fi
             enableIndices=${cpu}
         elif [ ${maxFreq} == ${cpuMaxFreq} ] && [ ${availFreqCmpr} == ${cpuAvailFreqCmpr} ]; then
             enableIndices="$enableIndices $cpu"
         else
             disableIndices="$disableIndices $cpu"
         fi
         cpu=$(($cpu + 1))
     done

     # Chose a frequency to lock to that's >= $CPU_TARGET_FREQ_PERCENT% of max
     # (below, 100M = 1K for KHz->MHz * 100 for %)
     TARGET_FREQ_MHZ=`expr \( ${cpuMaxFreq} \* ${CPU_TARGET_FREQ_PERCENT} \) \/ 100000`
     chosenFreq=0
     for freq in ${cpuAvailFreq}; do
         freqMhz=`expr ${freq} \/ 1000`
         if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ]; then
             chosenFreq=${freq}
             break
         fi
     done

     # enable 'big' CPUs
     for cpu in ${enableIndices}; do
         freq=${CPU_BASE}/cpu$cpu/cpufreq

         echo 1 > ${CPU_BASE}/cpu${cpu}/online
         echo userspace > ${CPU_BASE}/cpu${cpu}/${GOV}
         echo ${chosenFreq} > ${freq}/scaling_max_freq
         echo ${chosenFreq} > ${freq}/scaling_min_freq
         echo ${chosenFreq} > ${freq}/scaling_setspeed

         # validate setting the freq worked
         obsCur=`cat ${freq}/scaling_cur_freq`
         obsMin=`cat ${freq}/scaling_min_freq`
         obsMax=`cat ${freq}/scaling_max_freq`
         if [ obsCur -ne ${chosenFreq} ] || [ obsMin -ne ${chosenFreq} ] || [ obsMax -ne ${chosenFreq} ]; then
             echo "Failed to set CPU$cpu to $chosenFreq Hz! Aborting..."
             echo "scaling_cur_freq = $obsCur"
             echo "scaling_min_freq = $obsMin"
             echo "scaling_max_freq = $obsMax"
             exit -1
         fi
     done

     # disable other CPUs (Note: important to enable big cores first!)
     for cpu in ${disableIndices}; do
       echo 0 > ${CPU_BASE}/cpu${cpu}/online
     done

     echo "\nLocked CPUs ${enableIndices// /,} to $chosenFreq / $maxFreq KHz"
     echo "Disabled CPUs ${disableIndices// /,}"
 }

 # If we have a Qualcomm GPU, find its max frequency, and lock to
 # an available frequency that's >= GPU_TARGET_FREQ_PERCENT% of max.
 function_lock_gpu_kgsl() {
     if [ ! -d /sys/class/kgsl/kgsl-3d0/ ]; then
         # not kgsl, abort
         echo "\nCurrently don't support locking GPU clocks of $MODEL ($DEVICE)"
         return -1
     fi
     if [ ${DEVICE} == "walleye" ] || [ ${DEVICE} == "taimen" ]; then
         # Workaround crash
         echo "\nUnable to lock GPU clocks of $MODEL ($DEVICE)"
         return -1
     fi

     GPU_BASE=/sys/class/kgsl/kgsl-3d0

     gpuMaxFreq=0
     gpuAvailFreq=`cat $GPU_BASE/devfreq/available_frequencies`
     for freq in ${gpuAvailFreq}; do
         if [ ${freq} -gt ${gpuMaxFreq} ]; then
             gpuMaxFreq=${freq}
         fi
     done

     # (below, 100M = 1M for MHz * 100 for %)
     TARGET_FREQ_MHZ=`expr \( ${gpuMaxFreq} \* ${GPU_TARGET_FREQ_PERCENT} \) \/ 100000000`

     chosenFreq=${gpuMaxFreq}
     index=0
     chosenIndex=0
     for freq in ${gpuAvailFreq}; do
         freqMhz=`expr ${freq} \/ 1000000`
         if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ] && [ ${chosenFreq} -ge ${freq} ]; then
             # note avail freq are generally in reverse order, so we don't break out of this loop
             chosenFreq=${freq}
             chosenIndex=${index}
         fi
         index=$(($index + 1))
     done
     lastIndex=$(($index - 1))

     firstFreq=`echo $gpuAvailFreq | cut -d" " -f1`

     if [ ${gpuMaxFreq} != ${firstFreq} ]; then
         # pwrlevel is index of desired freq among available frequencies, from highest to lowest.
         # If gpuAvailFreq appears to be in-order, reverse the index
         chosenIndex=$(($lastIndex - $chosenIndex))
     fi

     echo 0 > ${GPU_BASE}/bus_split
     echo 1 > ${GPU_BASE}/force_clk_on
     echo 10000 > ${GPU_BASE}/idle_timer

     echo performance > ${GPU_BASE}/devfreq/governor

     # NOTE: we store in min/max twice, because we don't know if we're increasing
     # or decreasing, and it's invalid to try and set min > max, or max < min
     echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq
     echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq
     echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq
     echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq
     echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel
     echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel
     echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel
     echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel

     obsCur=`cat ${GPU_BASE}/devfreq/cur_freq`
     obsMin=`cat ${GPU_BASE}/devfreq/min_freq`
     obsMax=`cat ${GPU_BASE}/devfreq/max_freq`
     if [ obsCur -ne ${chosenFreq} ] || [ obsMin -ne ${chosenFreq} ] || [ obsMax -ne ${chosenFreq} ]; then
         echo "Failed to set GPU to $chosenFreq Hz! Aborting..."
         echo "cur_freq = $obsCur"
         echo "min_freq = $obsMin"
         echo "max_freq = $obsMax"
         echo "index = $chosenIndex"
         exit -1
     fi
     echo "\nLocked GPU to $chosenFreq / $gpuMaxFreq Hz"
 }

 # kill processes that manage thermals / scaling
 stop thermal-engine
 stop perfd
 stop vendor.thermal-engine
 stop vendor.perfd

 function_lock_cpu

 function_lock_gpu_kgsl

 # Memory bus - hardcoded per-device for now
 if [ ${DEVICE} == "marlin" ] || [ ${DEVICE} == "sailfish" ]; then
     echo 13763 > /sys/class/devfreq/soc:qcom,gpubw/max_freq
 else
     echo "\nUnable to lock memory bus of $MODEL ($DEVICE)."
 fi

 echo "\n$DEVICE clocks have been locked - to reset, reboot the device\n"
	#
	# Copyright (C) 2018 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	#################################################################
	###
	### DO NOT MODIFY THIS FILE
	### This is a copy of androidx's benchmark/lockClocks.sh
	### Make changes there instead then copy here!
	###
	#################################################################

	# This script can be used to lock device clocks to stable levels for comparing
	# different versions of software. Since the clock levels are not necessarily
	# indicative of real world behavior, this should never be used to compare
	# performance between different device models.

	# Fun notes for maintaining this file:
	# `expr` can deal with ints > INT32_MAX, but if compares cannot. This is why we use MHz.
	# `expr` can sometimes evaluate right-to-left. This is why we use parens.
	# Everything below the initial host-check isn't bash - Android uses mksh
	# mksh allows `\n` in an echo, bash doesn't
	# can't use `awk`

	CPU_TARGET_FREQ_PERCENT=50
	GPU_TARGET_FREQ_PERCENT=50

	if [ "`command -v getprop`" == "" ]; then
	if [ -n "`command -v adb`" ]; then
	echo ""
	echo "Pushing $0 and running it on device..."
	dest=/data/local/tmp/`basename $0`
	adb push $0 ${dest}
	adb shell ${dest}
	adb shell rm ${dest}
	exit
	else
	echo "Could not find adb. Options are:"
	echo " 1. Ensure adb is on your \$PATH"
	echo " 2. Use './gradlew lockClocks'"
	echo " 3. Manually adb push this script to your device, and run it there"
	exit -1
	fi
	fi

	# require root
	if [ "`id -u`" -ne "0" ]; then
	echo "Not running as root, cannot lock clocks, aborting"
	exit -1
	fi

	DEVICE=`getprop ro.product.device`
	MODEL=`getprop ro.product.model`

	# Find CPU max frequency, and lock big cores to an available frequency
	# that's >= $CPU_TARGET_FREQ_PERCENT% of max. Disable other cores.
	function_lock_cpu() {
	CPU_BASE=/sys/devices/system/cpu
	GOV=cpufreq/scaling_governor

	# Find max CPU freq, and associated list of available freqs
	cpuMaxFreq=0
	cpuAvailFreqCmpr=0
	cpuAvailFreq=0
	enableIndices=''
	disableIndices=''
	cpu=0
	while [ -f ${CPU_BASE}/cpu${cpu}/online ]; do
	# enable core, so we can find its frequencies
	echo 1 > ${CPU_BASE}/cpu${cpu}/online

	maxFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/cpuinfo_max_freq`
	availFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/scaling_available_frequencies`
	availFreqCmpr=${availFreq// /-}

	if [ ${maxFreq} -gt ${cpuMaxFreq} ]; then
	# new highest max freq, look for cpus with same max freq and same avail freq list
	cpuMaxFreq=${maxFreq}
	cpuAvailFreq=${availFreq}
	cpuAvailFreqCmpr=${availFreqCmpr}

	if [ -z ${disableIndices} ]; then
	disableIndices="$enableIndices"
	else
	disableIndices="$disableIndices $enableIndices"
	fi
	enableIndices=${cpu}
	elif [ ${maxFreq} == ${cpuMaxFreq} ] && [ ${availFreqCmpr} == ${cpuAvailFreqCmpr} ]; then
	enableIndices="$enableIndices $cpu"
	else
	disableIndices="$disableIndices $cpu"
	fi
	cpu=$(($cpu + 1))
	done

	# Chose a frequency to lock to that's >= $CPU_TARGET_FREQ_PERCENT% of max
	# (below, 100M = 1K for KHz->MHz * 100 for %)
	TARGET_FREQ_MHZ=`expr \( ${cpuMaxFreq} \* ${CPU_TARGET_FREQ_PERCENT} \) \/ 100000`
	chosenFreq=0
	for freq in ${cpuAvailFreq}; do
	freqMhz=`expr ${freq} \/ 1000`
	if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ]; then
	chosenFreq=${freq}
	break
	fi
	done

	# enable 'big' CPUs
	for cpu in ${enableIndices}; do
	freq=${CPU_BASE}/cpu$cpu/cpufreq

	echo 1 > ${CPU_BASE}/cpu${cpu}/online
	echo userspace > ${CPU_BASE}/cpu${cpu}/${GOV}
	echo ${chosenFreq} > ${freq}/scaling_max_freq
	echo ${chosenFreq} > ${freq}/scaling_min_freq
	echo ${chosenFreq} > ${freq}/scaling_setspeed

	# validate setting the freq worked
	obsCur=`cat ${freq}/scaling_cur_freq`
	obsMin=`cat ${freq}/scaling_min_freq`
	obsMax=`cat ${freq}/scaling_max_freq`
	if [ obsCur -ne ${chosenFreq} ] \|\| [ obsMin -ne ${chosenFreq} ] \|\| [ obsMax -ne ${chosenFreq} ]; then
	echo "Failed to set CPU$cpu to $chosenFreq Hz! Aborting..."
	echo "scaling_cur_freq = $obsCur"
	echo "scaling_min_freq = $obsMin"
	echo "scaling_max_freq = $obsMax"
	exit -1
	fi
	done

	# disable other CPUs (Note: important to enable big cores first!)
	for cpu in ${disableIndices}; do
	echo 0 > ${CPU_BASE}/cpu${cpu}/online
	done

	echo "\nLocked CPUs ${enableIndices// /,} to $chosenFreq / $maxFreq KHz"
	echo "Disabled CPUs ${disableIndices// /,}"
	}

	# If we have a Qualcomm GPU, find its max frequency, and lock to
	# an available frequency that's >= GPU_TARGET_FREQ_PERCENT% of max.
	function_lock_gpu_kgsl() {
	if [ ! -d /sys/class/kgsl/kgsl-3d0/ ]; then
	# not kgsl, abort
	echo "\nCurrently don't support locking GPU clocks of $MODEL ($DEVICE)"
	return -1
	fi
	if [ ${DEVICE} == "walleye" ] \|\| [ ${DEVICE} == "taimen" ]; then
	# Workaround crash
	echo "\nUnable to lock GPU clocks of $MODEL ($DEVICE)"
	return -1
	fi

	GPU_BASE=/sys/class/kgsl/kgsl-3d0

	gpuMaxFreq=0
	gpuAvailFreq=`cat $GPU_BASE/devfreq/available_frequencies`
	for freq in ${gpuAvailFreq}; do
	if [ ${freq} -gt ${gpuMaxFreq} ]; then
	gpuMaxFreq=${freq}
	fi
	done

	# (below, 100M = 1M for MHz * 100 for %)
	TARGET_FREQ_MHZ=`expr \( ${gpuMaxFreq} \* ${GPU_TARGET_FREQ_PERCENT} \) \/ 100000000`

	chosenFreq=${gpuMaxFreq}
	index=0
	chosenIndex=0
	for freq in ${gpuAvailFreq}; do
	freqMhz=`expr ${freq} \/ 1000000`
	if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ] && [ ${chosenFreq} -ge ${freq} ]; then
	# note avail freq are generally in reverse order, so we don't break out of this loop
	chosenFreq=${freq}
	chosenIndex=${index}
	fi
	index=$(($index + 1))
	done
	lastIndex=$(($index - 1))

	firstFreq=`echo $gpuAvailFreq \| cut -d" " -f1`

	if [ ${gpuMaxFreq} != ${firstFreq} ]; then
	# pwrlevel is index of desired freq among available frequencies, from highest to lowest.
	# If gpuAvailFreq appears to be in-order, reverse the index
	chosenIndex=$(($lastIndex - $chosenIndex))
	fi

	echo 0 > ${GPU_BASE}/bus_split
	echo 1 > ${GPU_BASE}/force_clk_on
	echo 10000 > ${GPU_BASE}/idle_timer

	echo performance > ${GPU_BASE}/devfreq/governor

	# NOTE: we store in min/max twice, because we don't know if we're increasing
	# or decreasing, and it's invalid to try and set min > max, or max < min
	echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq
	echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq
	echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq
	echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq
	echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel
	echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel
	echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel
	echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel

	obsCur=`cat ${GPU_BASE}/devfreq/cur_freq`
	obsMin=`cat ${GPU_BASE}/devfreq/min_freq`
	obsMax=`cat ${GPU_BASE}/devfreq/max_freq`
	if [ obsCur -ne ${chosenFreq} ] \|\| [ obsMin -ne ${chosenFreq} ] \|\| [ obsMax -ne ${chosenFreq} ]; then
	echo "Failed to set GPU to $chosenFreq Hz! Aborting..."
	echo "cur_freq = $obsCur"
	echo "min_freq = $obsMin"
	echo "max_freq = $obsMax"
	echo "index = $chosenIndex"
	exit -1
	fi
	echo "\nLocked GPU to $chosenFreq / $gpuMaxFreq Hz"
	}

	# kill processes that manage thermals / scaling
	stop thermal-engine
	stop perfd
	stop vendor.thermal-engine
	stop vendor.perfd

	function_lock_cpu

	function_lock_gpu_kgsl

	# Memory bus - hardcoded per-device for now
	if [ ${DEVICE} == "marlin" ] \|\| [ ${DEVICE} == "sailfish" ]; then
	echo 13763 > /sys/class/devfreq/soc:qcom,gpubw/max_freq
	else
	echo "\nUnable to lock memory bus of $MODEL ($DEVICE)."
	fi

	echo "\n$DEVICE clocks have been locked - to reset, reboot the device\n"