| /* |
| * Copyright (C) 2017 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "AAudioServiceEndpointMMAP" |
| //#define LOG_NDEBUG 0 |
| #include <utils/Log.h> |
| |
| #include <algorithm> |
| #include <assert.h> |
| #include <map> |
| #include <mutex> |
| #include <set> |
| #include <sstream> |
| #include <thread> |
| #include <utils/Singleton.h> |
| #include <vector> |
| |
| #include "AAudioEndpointManager.h" |
| #include "AAudioServiceEndpoint.h" |
| |
| #include "core/AudioStreamBuilder.h" |
| #include "AAudioServiceEndpoint.h" |
| #include "AAudioServiceStreamShared.h" |
| #include "AAudioServiceEndpointPlay.h" |
| #include "AAudioServiceEndpointMMAP.h" |
| |
| #define AAUDIO_BUFFER_CAPACITY_MIN (4 * 512) |
| #define AAUDIO_SAMPLE_RATE_DEFAULT 48000 |
| |
| // This is an estimate of the time difference between the HW and the MMAP time. |
| // TODO Get presentation timestamps from the HAL instead of using these estimates. |
| #define OUTPUT_ESTIMATED_HARDWARE_OFFSET_NANOS (3 * AAUDIO_NANOS_PER_MILLISECOND) |
| #define INPUT_ESTIMATED_HARDWARE_OFFSET_NANOS (-1 * AAUDIO_NANOS_PER_MILLISECOND) |
| |
| #define AAUDIO_MAX_OPEN_ATTEMPTS 10 |
| |
| using namespace android; // TODO just import names needed |
| using namespace aaudio; // TODO just import names needed |
| |
| AAudioServiceEndpointMMAP::AAudioServiceEndpointMMAP(AAudioService &audioService) |
| : mMmapStream(nullptr) |
| , mAAudioService(audioService) {} |
| |
| std::string AAudioServiceEndpointMMAP::dump() const { |
| std::stringstream result; |
| |
| result << " MMAP: framesTransferred = " << mFramesTransferred.get(); |
| result << ", HW nanos = " << mHardwareTimeOffsetNanos; |
| result << ", port handle = " << mPortHandle; |
| result << ", audio data FD = " << mAudioDataWrapper->getDataFileDescriptor(); |
| result << "\n"; |
| |
| result << " HW Offset Micros: " << |
| (getHardwareTimeOffsetNanos() |
| / AAUDIO_NANOS_PER_MICROSECOND) << "\n"; |
| |
| result << AAudioServiceEndpoint::dump(); |
| return result.str(); |
| } |
| |
| namespace { |
| |
| const static std::map<audio_format_t, audio_format_t> NEXT_FORMAT_TO_TRY = { |
| {AUDIO_FORMAT_PCM_FLOAT, AUDIO_FORMAT_PCM_32_BIT}, |
| {AUDIO_FORMAT_PCM_32_BIT, AUDIO_FORMAT_PCM_24_BIT_PACKED}, |
| {AUDIO_FORMAT_PCM_24_BIT_PACKED, AUDIO_FORMAT_PCM_8_24_BIT}, |
| {AUDIO_FORMAT_PCM_8_24_BIT, AUDIO_FORMAT_PCM_16_BIT} |
| }; |
| |
| audio_format_t getNextFormatToTry(audio_format_t curFormat) { |
| const auto it = NEXT_FORMAT_TO_TRY.find(curFormat); |
| return it != NEXT_FORMAT_TO_TRY.end() ? it->second : curFormat; |
| } |
| |
| struct configComp { |
| bool operator() (const audio_config_base_t& lhs, const audio_config_base_t& rhs) const { |
| if (lhs.sample_rate != rhs.sample_rate) { |
| return lhs.sample_rate < rhs.sample_rate; |
| } else if (lhs.channel_mask != rhs.channel_mask) { |
| return lhs.channel_mask < rhs.channel_mask; |
| } else { |
| return lhs.format < rhs.format; |
| } |
| } |
| }; |
| |
| } // namespace |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::open(const aaudio::AAudioStreamRequest &request) { |
| aaudio_result_t result = AAUDIO_OK; |
| mAudioDataWrapper = std::make_unique<SharedMemoryWrapper>(); |
| copyFrom(request.getConstantConfiguration()); |
| mRequestedDeviceId = getDeviceId(); |
| |
| mMmapClient.attributionSource = request.getAttributionSource(); |
| // TODO b/182392769: use attribution source util |
| mMmapClient.attributionSource.uid = VALUE_OR_FATAL( |
| legacy2aidl_uid_t_int32_t(IPCThreadState::self()->getCallingUid())); |
| mMmapClient.attributionSource.pid = VALUE_OR_FATAL( |
| legacy2aidl_pid_t_int32_t(IPCThreadState::self()->getCallingPid())); |
| |
| audio_format_t audioFormat = getFormat(); |
| int32_t sampleRate = getSampleRate(); |
| if (sampleRate == AAUDIO_UNSPECIFIED) { |
| sampleRate = AAUDIO_SAMPLE_RATE_DEFAULT; |
| } |
| |
| const aaudio_direction_t direction = getDirection(); |
| audio_config_base_t config; |
| config.format = audioFormat; |
| config.sample_rate = sampleRate; |
| config.channel_mask = AAudio_getChannelMaskForOpen( |
| getChannelMask(), getSamplesPerFrame(), direction == AAUDIO_DIRECTION_INPUT); |
| |
| std::set<audio_config_base_t, configComp> configsTried; |
| int32_t numberOfAttempts = 0; |
| while (numberOfAttempts < AAUDIO_MAX_OPEN_ATTEMPTS) { |
| if (configsTried.find(config) != configsTried.end()) { |
| // APM returning something that has already tried. |
| ALOGW("Have already tried to open with format=%#x and sr=%d, but failed before", |
| config.format, config.sample_rate); |
| break; |
| } |
| configsTried.insert(config); |
| |
| audio_config_base_t previousConfig = config; |
| result = openWithConfig(&config); |
| if (result != AAUDIO_ERROR_UNAVAILABLE) { |
| // Return if it is successful or there is an error that is not |
| // AAUDIO_ERROR_UNAVAILABLE happens. |
| ALOGI("Opened format=%#x sr=%d, with result=%d", previousConfig.format, |
| previousConfig.sample_rate, result); |
| break; |
| } |
| |
| // Try other formats if the config from APM is the same as our current config. |
| // Some HALs may report its format support incorrectly. |
| if ((previousConfig.format == config.format) && |
| (previousConfig.sample_rate == config.sample_rate)) { |
| config.format = getNextFormatToTry(config.format); |
| } |
| |
| ALOGD("%s() %#x %d failed, perhaps due to format or sample rate. Try again with %#x %d", |
| __func__, previousConfig.format, previousConfig.sample_rate, config.format, |
| config.sample_rate); |
| numberOfAttempts++; |
| } |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::openWithConfig( |
| audio_config_base_t* config) { |
| aaudio_result_t result = AAUDIO_OK; |
| audio_config_base_t currentConfig = *config; |
| audio_port_handle_t deviceId; |
| |
| const audio_attributes_t attributes = getAudioAttributesFrom(this); |
| |
| deviceId = mRequestedDeviceId; |
| |
| const aaudio_direction_t direction = getDirection(); |
| |
| if (direction == AAUDIO_DIRECTION_OUTPUT) { |
| mHardwareTimeOffsetNanos = OUTPUT_ESTIMATED_HARDWARE_OFFSET_NANOS; // frames at DAC later |
| |
| } else if (direction == AAUDIO_DIRECTION_INPUT) { |
| mHardwareTimeOffsetNanos = INPUT_ESTIMATED_HARDWARE_OFFSET_NANOS; // frames at ADC earlier |
| |
| } else { |
| ALOGE("%s() invalid direction = %d", __func__, direction); |
| return AAUDIO_ERROR_ILLEGAL_ARGUMENT; |
| } |
| |
| const MmapStreamInterface::stream_direction_t streamDirection = |
| (direction == AAUDIO_DIRECTION_OUTPUT) |
| ? MmapStreamInterface::DIRECTION_OUTPUT |
| : MmapStreamInterface::DIRECTION_INPUT; |
| |
| const aaudio_session_id_t requestedSessionId = getSessionId(); |
| audio_session_t sessionId = AAudioConvert_aaudioToAndroidSessionId(requestedSessionId); |
| |
| // Open HAL stream. Set mMmapStream |
| ALOGD("%s trying to open MMAP stream with format=%#x, " |
| "sample_rate=%u, channel_mask=%#x, device=%d", |
| __func__, config->format, config->sample_rate, |
| config->channel_mask, deviceId); |
| const status_t status = MmapStreamInterface::openMmapStream(streamDirection, |
| &attributes, |
| config, |
| mMmapClient, |
| &deviceId, |
| &sessionId, |
| this, // callback |
| mMmapStream, |
| &mPortHandle); |
| ALOGD("%s() mMapClient.attributionSource = %s => portHandle = %d\n", |
| __func__, mMmapClient.attributionSource.toString().c_str(), mPortHandle); |
| if (status != OK) { |
| // This can happen if the resource is busy or the config does |
| // not match the hardware. |
| ALOGD("%s() - openMmapStream() returned status=%d, suggested format=%#x, sample_rate=%u, " |
| "channel_mask=%#x", |
| __func__, status, config->format, config->sample_rate, config->channel_mask); |
| // Keep the channel mask of the current config |
| config->channel_mask = currentConfig.channel_mask; |
| return AAUDIO_ERROR_UNAVAILABLE; |
| } |
| |
| if (deviceId == AAUDIO_UNSPECIFIED) { |
| ALOGW("%s() - openMmapStream() failed to set deviceId", __func__); |
| } |
| setDeviceId(deviceId); |
| |
| if (sessionId == AUDIO_SESSION_ALLOCATE) { |
| ALOGW("%s() - openMmapStream() failed to set sessionId", __func__); |
| } |
| |
| const aaudio_session_id_t actualSessionId = |
| (requestedSessionId == AAUDIO_SESSION_ID_NONE) |
| ? AAUDIO_SESSION_ID_NONE |
| : (aaudio_session_id_t) sessionId; |
| setSessionId(actualSessionId); |
| |
| ALOGD("%s(format = 0x%X) deviceId = %d, sessionId = %d", |
| __func__, config->format, getDeviceId(), getSessionId()); |
| |
| // Create MMAP/NOIRQ buffer. |
| result = createMmapBuffer(); |
| if (result != AAUDIO_OK) { |
| goto error; |
| } |
| |
| // Get information about the stream and pass it back to the caller. |
| setChannelMask(AAudioConvert_androidToAAudioChannelMask( |
| config->channel_mask, getDirection() == AAUDIO_DIRECTION_INPUT, |
| AAudio_isChannelIndexMask(config->channel_mask))); |
| |
| setFormat(config->format); |
| setSampleRate(config->sample_rate); |
| setHardwareSampleRate(getSampleRate()); |
| setHardwareFormat(getFormat()); |
| setHardwareSamplesPerFrame(AAudioConvert_channelMaskToCount(getChannelMask())); |
| |
| // If the position is not updated while the timestamp is updated for more than a certain amount, |
| // the timestamp reported from the HAL may not be accurate. Here, a timestamp grace period is |
| // set as 5 burst size. We may want to update this value if there is any report from OEMs saying |
| // that is too short. |
| static constexpr int kTimestampGraceBurstCount = 5; |
| mTimestampGracePeriodMs = ((int64_t) kTimestampGraceBurstCount * mFramesPerBurst |
| * AAUDIO_MILLIS_PER_SECOND) / getSampleRate(); |
| |
| mDataReportOffsetNanos = ((int64_t)mTimestampGracePeriodMs) * AAUDIO_NANOS_PER_MILLISECOND; |
| |
| ALOGD("%s() got rate = %d, channels = %d channelMask = %#x, deviceId = %d, capacity = %d\n", |
| __func__, getSampleRate(), getSamplesPerFrame(), getChannelMask(), |
| deviceId, getBufferCapacity()); |
| |
| ALOGD("%s() got format = 0x%X = %s, frame size = %d, burst size = %d", |
| __func__, getFormat(), audio_format_to_string(getFormat()), |
| calculateBytesPerFrame(), mFramesPerBurst); |
| |
| return result; |
| |
| error: |
| close(); |
| // restore original requests |
| setDeviceId(mRequestedDeviceId); |
| setSessionId(requestedSessionId); |
| return result; |
| } |
| |
| void AAudioServiceEndpointMMAP::close() { |
| if (mMmapStream != nullptr) { |
| // Needs to be explicitly cleared or CTS will fail but it is not clear why. |
| mMmapStream.clear(); |
| AudioClock::sleepForNanos(100 * AAUDIO_NANOS_PER_MILLISECOND); |
| } |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::startStream(sp<AAudioServiceStreamBase> stream, |
| audio_port_handle_t *clientHandle __unused) { |
| // Start the client on behalf of the AAudio service. |
| // Use the port handle that was provided by openMmapStream(). |
| audio_port_handle_t tempHandle = mPortHandle; |
| audio_attributes_t attr = {}; |
| if (stream != nullptr) { |
| attr = getAudioAttributesFrom(stream.get()); |
| } |
| const aaudio_result_t result = startClient( |
| mMmapClient, stream == nullptr ? nullptr : &attr, &tempHandle); |
| // When AudioFlinger is passed a valid port handle then it should not change it. |
| LOG_ALWAYS_FATAL_IF(tempHandle != mPortHandle, |
| "%s() port handle not expected to change from %d to %d", |
| __func__, mPortHandle, tempHandle); |
| ALOGV("%s() mPortHandle = %d", __func__, mPortHandle); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::stopStream(sp<AAudioServiceStreamBase> /*stream*/, |
| audio_port_handle_t /*clientHandle*/) { |
| mFramesTransferred.reset32(); |
| |
| // Round 64-bit counter up to a multiple of the buffer capacity. |
| // This is required because the 64-bit counter is used as an index |
| // into a circular buffer and the actual HW position is reset to zero |
| // when the stream is stopped. |
| mFramesTransferred.roundUp64(getBufferCapacity()); |
| |
| // Use the port handle that was provided by openMmapStream(). |
| ALOGV("%s() mPortHandle = %d", __func__, mPortHandle); |
| return stopClient(mPortHandle); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::startClient(const android::AudioClient& client, |
| const audio_attributes_t *attr, |
| audio_port_handle_t *clientHandle) { |
| return mMmapStream == nullptr |
| ? AAUDIO_ERROR_NULL |
| : AAudioConvert_androidToAAudioResult(mMmapStream->start(client, attr, clientHandle)); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::stopClient(audio_port_handle_t clientHandle) { |
| return mMmapStream == nullptr |
| ? AAUDIO_ERROR_NULL |
| : AAudioConvert_androidToAAudioResult(mMmapStream->stop(clientHandle)); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::standby() { |
| return mMmapStream == nullptr |
| ? AAUDIO_ERROR_NULL |
| : AAudioConvert_androidToAAudioResult(mMmapStream->standby()); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::exitStandby(AudioEndpointParcelable* parcelable) { |
| if (mMmapStream == nullptr) { |
| return AAUDIO_ERROR_NULL; |
| } |
| mAudioDataWrapper->reset(); |
| const aaudio_result_t result = createMmapBuffer(); |
| if (result == AAUDIO_OK) { |
| getDownDataDescription(parcelable); |
| } |
| return result; |
| } |
| |
| // Get free-running DSP or DMA hardware position from the HAL. |
| aaudio_result_t AAudioServiceEndpointMMAP::getFreeRunningPosition(int64_t *positionFrames, |
| int64_t *timeNanos) { |
| struct audio_mmap_position position; |
| if (mMmapStream == nullptr) { |
| return AAUDIO_ERROR_NULL; |
| } |
| const status_t status = mMmapStream->getMmapPosition(&position); |
| ALOGV("%s() status= %d, pos = %d, nanos = %lld\n", |
| __func__, status, position.position_frames, (long long) position.time_nanoseconds); |
| const aaudio_result_t result = AAudioConvert_androidToAAudioResult(status); |
| if (result == AAUDIO_ERROR_UNAVAILABLE) { |
| ALOGW("%s(): getMmapPosition() has no position data available", __func__); |
| } else if (result != AAUDIO_OK) { |
| ALOGE("%s(): getMmapPosition() returned status %d", __func__, status); |
| } else { |
| // Convert 32-bit position to 64-bit position. |
| mFramesTransferred.update32(position.position_frames); |
| *positionFrames = mFramesTransferred.get(); |
| *timeNanos = position.time_nanoseconds; |
| } |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::getTimestamp(int64_t* /*positionFrames*/, |
| int64_t* /*timeNanos*/) { |
| return 0; // TODO |
| } |
| |
| // This is called by onTearDown() in a separate thread to avoid deadlocks. |
| void AAudioServiceEndpointMMAP::handleTearDownAsync(audio_port_handle_t portHandle) { |
| // Are we tearing down the EXCLUSIVE MMAP stream? |
| if (isStreamRegistered(portHandle)) { |
| ALOGD("%s(%d) tearing down this entire MMAP endpoint", __func__, portHandle); |
| disconnectRegisteredStreams(); |
| } else { |
| // Must be a SHARED stream? |
| ALOGD("%s(%d) disconnect a specific stream", __func__, portHandle); |
| const aaudio_result_t result = mAAudioService.disconnectStreamByPortHandle(portHandle); |
| ALOGD("%s(%d) disconnectStreamByPortHandle returned %d", __func__, portHandle, result); |
| } |
| }; |
| |
| // This is called by AudioFlinger when it wants to destroy a stream. |
| void AAudioServiceEndpointMMAP::onTearDown(audio_port_handle_t portHandle) { |
| ALOGD("%s(portHandle = %d) called", __func__, portHandle); |
| const android::sp<AAudioServiceEndpointMMAP> holdEndpoint(this); |
| std::thread asyncTask([holdEndpoint, portHandle]() { |
| holdEndpoint->handleTearDownAsync(portHandle); |
| }); |
| asyncTask.detach(); |
| } |
| |
| void AAudioServiceEndpointMMAP::onVolumeChanged(float volume) { |
| ALOGD("%s() volume = %f", __func__, volume); |
| const std::lock_guard<std::mutex> lock(mLockStreams); |
| for(const auto& stream : mRegisteredStreams) { |
| stream->onVolumeChanged(volume); |
| } |
| }; |
| |
| void AAudioServiceEndpointMMAP::onRoutingChanged(audio_port_handle_t portHandle) { |
| const auto deviceId = static_cast<int32_t>(portHandle); |
| ALOGD("%s() called with dev %d, old = %d", __func__, deviceId, getDeviceId()); |
| if (getDeviceId() != deviceId) { |
| if (getDeviceId() != AUDIO_PORT_HANDLE_NONE) { |
| // When there is a routing changed, mmap stream should be disconnected. Set `mConnected` |
| // as false here so that there won't be a new stream connect to this endpoint. |
| mConnected.store(false); |
| const android::sp<AAudioServiceEndpointMMAP> holdEndpoint(this); |
| std::thread asyncTask([holdEndpoint, deviceId]() { |
| ALOGD("onRoutingChanged() asyncTask launched"); |
| // When routing changed, the stream is disconnected and cannot be used except for |
| // closing. In that case, it should be safe to release all registered streams. |
| // This can help release service side resource in case the client doesn't close |
| // the stream after receiving disconnect event. |
| holdEndpoint->releaseRegisteredStreams(); |
| holdEndpoint->setDeviceId(deviceId); |
| }); |
| asyncTask.detach(); |
| } else { |
| setDeviceId(deviceId); |
| } |
| } |
| }; |
| |
| /** |
| * Get an immutable description of the data queue from the HAL. |
| */ |
| aaudio_result_t AAudioServiceEndpointMMAP::getDownDataDescription( |
| AudioEndpointParcelable* parcelable) |
| { |
| if (mAudioDataWrapper->setupFifoBuffer(calculateBytesPerFrame(), getBufferCapacity()) |
| != AAUDIO_OK) { |
| ALOGE("Failed to setup audio data wrapper, will not be able to " |
| "set data for sound dose computation"); |
| // This will not affect the audio processing capability |
| } |
| // Gather information on the data queue based on HAL info. |
| mAudioDataWrapper->fillParcelable(parcelable, parcelable->mDownDataQueueParcelable, |
| calculateBytesPerFrame(), mFramesPerBurst, |
| getBufferCapacity(), |
| getDirection() == AAUDIO_DIRECTION_OUTPUT |
| ? SharedMemoryWrapper::WRITE |
| : SharedMemoryWrapper::NONE); |
| return AAUDIO_OK; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::getExternalPosition(uint64_t *positionFrames, |
| int64_t *timeNanos) |
| { |
| if (mHalExternalPositionStatus != AAUDIO_OK) { |
| return mHalExternalPositionStatus; |
| } |
| uint64_t tempPositionFrames; |
| int64_t tempTimeNanos; |
| const status_t status = mMmapStream->getExternalPosition(&tempPositionFrames, &tempTimeNanos); |
| if (status != OK) { |
| // getExternalPosition reports error. The HAL may not support the API. Cache the result |
| // so that the call will not go to the HAL next time. |
| mHalExternalPositionStatus = AAudioConvert_androidToAAudioResult(status); |
| return mHalExternalPositionStatus; |
| } |
| |
| // If the HAL keeps reporting the same position or timestamp, the HAL may be having some issues |
| // to report correct external position. In that case, we will not trust the values reported from |
| // the HAL. Ideally, we may want to stop querying external position if the HAL cannot report |
| // correct position within a period. But it may not be a good idea to get system time too often. |
| // In that case, a maximum number of frozen external position is defined so that if the |
| // count of the same timestamp or position is reported by the HAL continuously, the values from |
| // the HAL will no longer be trusted. |
| static constexpr int kMaxFrozenCount = 20; |
| // If the HAL version is less than 7.0, the getPresentationPosition is an optional API. |
| // If the HAL version is 7.0 or later, the getPresentationPosition is a mandatory API. |
| // In that case, even the returned status is NO_ERROR, it doesn't indicate the returned |
| // position is a valid one. Do a simple validation, which is checking if the position is |
| // forward within half a second or not, here so that this function can return error if |
| // the validation fails. Note that we don't only apply this validation logic to HAL API |
| // less than 7.0. The reason is that there is a chance the HAL is not reporting the |
| // timestamp and position correctly. |
| if (mLastPositionFrames > tempPositionFrames) { |
| // If the position is going backwards, there must be something wrong with the HAL. |
| // In that case, we do not trust the values reported by the HAL. |
| ALOGW("%s position is going backwards, last position(%jd) current position(%jd)", |
| __func__, mLastPositionFrames, tempPositionFrames); |
| mHalExternalPositionStatus = AAUDIO_ERROR_INTERNAL; |
| return mHalExternalPositionStatus; |
| } else if (mLastPositionFrames == tempPositionFrames) { |
| if (tempTimeNanos - mTimestampNanosForLastPosition > |
| AAUDIO_NANOS_PER_MILLISECOND * mTimestampGracePeriodMs) { |
| ALOGW("%s, the reported position is not changed within %d msec. " |
| "Set the external position as not supported", __func__, mTimestampGracePeriodMs); |
| mHalExternalPositionStatus = AAUDIO_ERROR_INTERNAL; |
| return mHalExternalPositionStatus; |
| } |
| mFrozenPositionCount++; |
| } else { |
| mFrozenPositionCount = 0; |
| } |
| |
| if (mTimestampNanosForLastPosition > tempTimeNanos) { |
| // If the timestamp is going backwards, there must be something wrong with the HAL. |
| // In that case, we do not trust the values reported by the HAL. |
| ALOGW("%s timestamp is going backwards, last timestamp(%jd), current timestamp(%jd)", |
| __func__, mTimestampNanosForLastPosition, tempTimeNanos); |
| mHalExternalPositionStatus = AAUDIO_ERROR_INTERNAL; |
| return mHalExternalPositionStatus; |
| } else if (mTimestampNanosForLastPosition == tempTimeNanos) { |
| mFrozenTimestampCount++; |
| } else { |
| mFrozenTimestampCount = 0; |
| } |
| |
| if (mFrozenTimestampCount + mFrozenPositionCount > kMaxFrozenCount) { |
| ALOGW("%s too many frozen external position from HAL.", __func__); |
| mHalExternalPositionStatus = AAUDIO_ERROR_INTERNAL; |
| return mHalExternalPositionStatus; |
| } |
| |
| mLastPositionFrames = tempPositionFrames; |
| mTimestampNanosForLastPosition = tempTimeNanos; |
| |
| // Only update the timestamp and position when they looks valid. |
| *positionFrames = tempPositionFrames; |
| *timeNanos = tempTimeNanos; |
| return mHalExternalPositionStatus; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::createMmapBuffer() |
| { |
| memset(&mMmapBufferinfo, 0, sizeof(struct audio_mmap_buffer_info)); |
| int32_t minSizeFrames = getBufferCapacity(); |
| if (minSizeFrames <= 0) { // zero will get rejected |
| minSizeFrames = AAUDIO_BUFFER_CAPACITY_MIN; |
| } |
| const status_t status = mMmapStream->createMmapBuffer(minSizeFrames, &mMmapBufferinfo); |
| const bool isBufferShareable = mMmapBufferinfo.flags & AUDIO_MMAP_APPLICATION_SHAREABLE; |
| if (status != OK) { |
| ALOGE("%s() - createMmapBuffer() failed with status %d %s", |
| __func__, status, strerror(-status)); |
| return AAUDIO_ERROR_UNAVAILABLE; |
| } else { |
| ALOGD("%s() createMmapBuffer() buffer_size = %d fr, burst_size %d fr" |
| ", Sharable FD: %s", |
| __func__, |
| mMmapBufferinfo.buffer_size_frames, |
| mMmapBufferinfo.burst_size_frames, |
| isBufferShareable ? "Yes" : "No"); |
| } |
| |
| setBufferCapacity(mMmapBufferinfo.buffer_size_frames); |
| if (!isBufferShareable) { |
| // Exclusive mode can only be used by the service because the FD cannot be shared. |
| const int32_t audioServiceUid = |
| VALUE_OR_FATAL(legacy2aidl_uid_t_int32_t(getuid())); |
| if ((mMmapClient.attributionSource.uid != audioServiceUid) && |
| getSharingMode() == AAUDIO_SHARING_MODE_EXCLUSIVE) { |
| ALOGW("%s() - exclusive FD cannot be used by client", __func__); |
| return AAUDIO_ERROR_UNAVAILABLE; |
| } |
| } |
| |
| // AAudio creates a copy of this FD and retains ownership of the copy. |
| // Assume that AudioFlinger will close the original shared_memory_fd. |
| |
| mAudioDataWrapper->getDataFileDescriptor().reset(dup(mMmapBufferinfo.shared_memory_fd)); |
| if (mAudioDataWrapper->getDataFileDescriptor().get() == -1) { |
| ALOGE("%s() - could not dup shared_memory_fd", __func__); |
| return AAUDIO_ERROR_INTERNAL; |
| } |
| |
| // Call to HAL to make sure the transport FD was able to be closed by binder. |
| // This is a tricky workaround for a problem in Binder. |
| // TODO:[b/192048842] When that problem is fixed we may be able to remove or change this code. |
| struct audio_mmap_position position; |
| mMmapStream->getMmapPosition(&position); |
| |
| mFramesPerBurst = mMmapBufferinfo.burst_size_frames; |
| |
| return AAUDIO_OK; |
| } |
| |
| int64_t AAudioServiceEndpointMMAP::nextDataReportTime() { |
| return getDirection() == AAUDIO_DIRECTION_OUTPUT |
| ? AudioClock::getNanoseconds() + mDataReportOffsetNanos |
| : std::numeric_limits<int64_t>::max(); |
| } |
| |
| void AAudioServiceEndpointMMAP::reportData() { |
| if (mMmapStream == nullptr) { |
| // This must not happen |
| ALOGE("%s() invalid state, mmap stream is not initialized", __func__); |
| return; |
| } |
| auto fifo = mAudioDataWrapper->getFifoBuffer(); |
| if (fifo == nullptr) { |
| ALOGE("%s() fifo buffer is not initialized, cannot report data", __func__); |
| return; |
| } |
| |
| WrappingBuffer wrappingBuffer; |
| fifo_frames_t framesAvailable = fifo->getFullDataAvailable(&wrappingBuffer); |
| for (size_t i = 0; i < WrappingBuffer::SIZE; ++i) { |
| if (wrappingBuffer.numFrames[i] > 0) { |
| mMmapStream->reportData(wrappingBuffer.data[i], wrappingBuffer.numFrames[i]); |
| } |
| } |
| fifo->advanceReadIndex(framesAvailable); |
| } |