| /* |
| * Copyright (C) 2013-2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_SERVERS_CAMERA3DEVICE_H |
| #define ANDROID_SERVERS_CAMERA3DEVICE_H |
| |
| #include <utility> |
| #include <unordered_map> |
| #include <set> |
| #include <tuple> |
| |
| #include <utils/Condition.h> |
| #include <utils/Errors.h> |
| #include <utils/List.h> |
| #include <utils/Mutex.h> |
| #include <utils/Thread.h> |
| #include <utils/KeyedVector.h> |
| #include <utils/Timers.h> |
| |
| #include <camera/CaptureResult.h> |
| |
| #include "CameraServiceWatchdog.h" |
| #include <aidl/android/hardware/camera/device/CameraBlob.h> |
| |
| #include "common/CameraDeviceBase.h" |
| #include "device3/BufferUtils.h" |
| #include "device3/StatusTracker.h" |
| #include "device3/Camera3BufferManager.h" |
| #include "device3/DistortionMapper.h" |
| #include "device3/ZoomRatioMapper.h" |
| #include "device3/RotateAndCropMapper.h" |
| #include "device3/UHRCropAndMeteringRegionMapper.h" |
| #include "device3/InFlightRequest.h" |
| #include "device3/Camera3OutputInterface.h" |
| #include "device3/Camera3OfflineSession.h" |
| #include "device3/Camera3StreamInterface.h" |
| #include "utils/TagMonitor.h" |
| #include "utils/IPCTransport.h" |
| #include "utils/LatencyHistogram.h" |
| #include "utils/CameraServiceProxyWrapper.h" |
| #include <camera_metadata_hidden.h> |
| |
| using android::camera3::camera_capture_request_t; |
| using android::camera3::camera_request_template; |
| using android::camera3::camera_stream_buffer_t; |
| using android::camera3::camera_stream_configuration_t; |
| using android::camera3::camera_stream_configuration_mode_t; |
| using android::camera3::CAMERA_TEMPLATE_COUNT; |
| using android::camera3::OutputStreamInfo; |
| |
| namespace android { |
| |
| namespace camera3 { |
| |
| class Camera3Stream; |
| class Camera3ZslStream; |
| class Camera3StreamInterface; |
| |
| } // namespace camera3 |
| |
| /** |
| * CameraDevice for HAL devices with version CAMERA_DEVICE_API_VERSION_3_0 or higher. |
| */ |
| class Camera3Device : |
| public CameraDeviceBase, |
| public camera3::SetErrorInterface, |
| public camera3::InflightRequestUpdateInterface, |
| public camera3::RequestBufferInterface, |
| public camera3::FlushBufferInterface { |
| friend class HidlCamera3Device; |
| friend class AidlCamera3Device; |
| public: |
| |
| explicit Camera3Device(std::shared_ptr<CameraServiceProxyWrapper>& cameraServiceProxyWrapper, |
| const std::string& id, bool overrideForPerfClass, bool overrideToPortrait, |
| bool legacyClient = false); |
| |
| virtual ~Camera3Device(); |
| // Delete and optionally close native handles and clear the input vector afterward |
| static void cleanupNativeHandles( |
| std::vector<native_handle_t*> *handles, bool closeFd = false); |
| |
| virtual IPCTransport getTransportType() const override { |
| return mInterface->getTransportType(); |
| } |
| |
| /** |
| * CameraDeviceBase interface |
| */ |
| |
| const std::string& getId() const override; |
| |
| metadata_vendor_id_t getVendorTagId() const override { return mVendorTagId; } |
| |
| // Watchdog thread |
| sp<CameraServiceWatchdog> mCameraServiceWatchdog; |
| |
| // Transitions to idle state on success. |
| virtual status_t initialize(sp<CameraProviderManager> /*manager*/, |
| const std::string& /*monitorTags*/) = 0; |
| |
| status_t disconnect() override; |
| status_t dump(int fd, const Vector<String16> &args) override; |
| status_t startWatchingTags(const std::string &tags) override; |
| status_t stopWatchingTags() override; |
| status_t dumpWatchedEventsToVector(std::vector<std::string> &out) override; |
| const CameraMetadata& info() const override; |
| const CameraMetadata& infoPhysical(const std::string& physicalId) const override; |
| bool isCompositeJpegRDisabled() const override { return mIsCompositeJpegRDisabled; }; |
| |
| // Capture and setStreamingRequest will configure streams if currently in |
| // idle state |
| status_t capture(CameraMetadata &request, int64_t *lastFrameNumber = NULL) override; |
| status_t captureList(const List<const PhysicalCameraSettingsList> &requestsList, |
| const std::list<const SurfaceMap> &surfaceMaps, |
| int64_t *lastFrameNumber = NULL) override; |
| status_t setStreamingRequest(const CameraMetadata &request, |
| int64_t *lastFrameNumber = NULL) override; |
| status_t setStreamingRequestList(const List<const PhysicalCameraSettingsList> &requestsList, |
| const std::list<const SurfaceMap> &surfaceMaps, |
| int64_t *lastFrameNumber = NULL) override; |
| status_t clearStreamingRequest(int64_t *lastFrameNumber = NULL) override; |
| |
| status_t waitUntilRequestReceived(int32_t requestId, nsecs_t timeout) override; |
| |
| // Actual stream creation/deletion is delayed until first request is submitted |
| // If adding streams while actively capturing, will pause device before adding |
| // stream, reconfiguring device, and unpausing. If the client create a stream |
| // with nullptr consumer surface, the client must then call setConsumers() |
| // and finish the stream configuration before starting output streaming. |
| status_t createStream(sp<Surface> consumer, |
| uint32_t width, uint32_t height, int format, |
| android_dataspace dataSpace, camera_stream_rotation_t rotation, int *id, |
| const std::string& physicalCameraId, |
| const std::unordered_set<int32_t> &sensorPixelModesUsed, |
| std::vector<int> *surfaceIds = nullptr, |
| int streamSetId = camera3::CAMERA3_STREAM_SET_ID_INVALID, |
| bool isShared = false, bool isMultiResolution = false, |
| uint64_t consumerUsage = 0, |
| int64_t dynamicRangeProfile = |
| ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_STANDARD, |
| int64_t streamUseCase = ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT, |
| int timestampBase = OutputConfiguration::TIMESTAMP_BASE_DEFAULT, |
| int mirrorMode = OutputConfiguration::MIRROR_MODE_AUTO, |
| int32_t colorSpace = ANDROID_REQUEST_AVAILABLE_COLOR_SPACE_PROFILES_MAP_UNSPECIFIED, |
| bool useReadoutTimestamp = false) |
| override; |
| |
| status_t createStream(const std::vector<sp<Surface>>& consumers, |
| bool hasDeferredConsumer, uint32_t width, uint32_t height, int format, |
| android_dataspace dataSpace, camera_stream_rotation_t rotation, int *id, |
| const std::string& physicalCameraId, |
| const std::unordered_set<int32_t> &sensorPixelModesUsed, |
| std::vector<int> *surfaceIds = nullptr, |
| int streamSetId = camera3::CAMERA3_STREAM_SET_ID_INVALID, |
| bool isShared = false, bool isMultiResolution = false, |
| uint64_t consumerUsage = 0, |
| int64_t dynamicRangeProfile = |
| ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_STANDARD, |
| int64_t streamUseCase = ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT, |
| int timestampBase = OutputConfiguration::TIMESTAMP_BASE_DEFAULT, |
| int mirrorMode = OutputConfiguration::MIRROR_MODE_AUTO, |
| int32_t colorSpace = ANDROID_REQUEST_AVAILABLE_COLOR_SPACE_PROFILES_MAP_UNSPECIFIED, |
| bool useReadoutTimestamp = false) |
| override; |
| |
| status_t createInputStream( |
| uint32_t width, uint32_t height, int format, bool isMultiResolution, |
| int *id) override; |
| |
| status_t getStreamInfo(int id, StreamInfo *streamInfo) override; |
| status_t setStreamTransform(int id, int transform) override; |
| |
| status_t deleteStream(int id) override; |
| |
| status_t configureStreams(const CameraMetadata& sessionParams, |
| int operatingMode = |
| camera_stream_configuration_mode_t::CAMERA_STREAM_CONFIGURATION_NORMAL_MODE) override; |
| status_t getInputBufferProducer( |
| sp<IGraphicBufferProducer> *producer) override; |
| |
| void getOfflineStreamIds(std::vector<int> *offlineStreamIds) override; |
| |
| status_t createDefaultRequest(camera_request_template_t templateId, |
| CameraMetadata *request) override; |
| |
| // Transitions to the idle state on success |
| status_t waitUntilDrained() override; |
| |
| status_t setNotifyCallback(wp<NotificationListener> listener) override; |
| bool willNotify3A() override; |
| status_t waitForNextFrame(nsecs_t timeout) override; |
| status_t getNextResult(CaptureResult *frame) override; |
| |
| status_t triggerAutofocus(uint32_t id) override; |
| status_t triggerCancelAutofocus(uint32_t id) override; |
| status_t triggerPrecaptureMetering(uint32_t id) override; |
| |
| status_t flush(int64_t *lastFrameNumber = NULL) override; |
| |
| status_t prepare(int streamId) override; |
| |
| status_t tearDown(int streamId) override; |
| |
| status_t addBufferListenerForStream(int streamId, |
| wp<camera3::Camera3StreamBufferListener> listener) override; |
| |
| status_t prepare(int maxCount, int streamId) override; |
| |
| ssize_t getJpegBufferSize(const CameraMetadata &info, uint32_t width, |
| uint32_t height) const override; |
| ssize_t getPointCloudBufferSize(const CameraMetadata &info) const; |
| ssize_t getRawOpaqueBufferSize(const CameraMetadata &info, int32_t width, int32_t height, |
| bool maxResolution) const; |
| |
| // Methods called by subclasses |
| void notifyStatus(bool idle); // updates from StatusTracker |
| |
| /** |
| * Set the deferred consumer surfaces to the output stream and finish the deferred |
| * consumer configuration. |
| */ |
| status_t setConsumerSurfaces( |
| int streamId, const std::vector<sp<Surface>>& consumers, |
| std::vector<int> *surfaceIds /*out*/) override; |
| |
| /** |
| * Update a given stream. |
| */ |
| status_t updateStream(int streamId, const std::vector<sp<Surface>> &newSurfaces, |
| const std::vector<OutputStreamInfo> &outputInfo, |
| const std::vector<size_t> &removedSurfaceIds, |
| KeyedVector<sp<Surface>, size_t> *outputMap/*out*/); |
| |
| /** |
| * Drop buffers for stream of streamId if dropping is true. If dropping is false, do not |
| * drop buffers for stream of streamId. |
| */ |
| status_t dropStreamBuffers(bool dropping, int streamId) override; |
| |
| nsecs_t getExpectedInFlightDuration() override; |
| |
| virtual status_t switchToOffline(const std::vector<int32_t>& , |
| /*out*/ sp<CameraOfflineSessionBase>* ) override { |
| return INVALID_OPERATION; |
| }; |
| |
| // RequestBufferInterface |
| bool startRequestBuffer() override; |
| void endRequestBuffer() override; |
| nsecs_t getWaitDuration() override; |
| |
| // FlushBufferInterface |
| void getInflightBufferKeys(std::vector<std::pair<int32_t, int32_t>>* out) override; |
| void getInflightRequestBufferKeys(std::vector<uint64_t>* out) override; |
| std::vector<sp<camera3::Camera3StreamInterface>> getAllStreams() override; |
| |
| /** |
| * Set the current behavior for the ROTATE_AND_CROP control when in AUTO. |
| * |
| * The value must be one of the ROTATE_AND_CROP_* values besides AUTO, |
| * and defaults to NONE. |
| */ |
| status_t setRotateAndCropAutoBehavior( |
| camera_metadata_enum_android_scaler_rotate_and_crop_t rotateAndCropValue, bool fromHal); |
| |
| /** |
| * Set the current behavior for the AUTOFRAMING control when in AUTO. |
| * |
| * The value must be one of the AUTOFRAMING_* values besides AUTO. |
| */ |
| status_t setAutoframingAutoBehavior( |
| camera_metadata_enum_android_control_autoframing_t autoframingValue); |
| |
| /** |
| * Whether camera muting (producing black-only output) is supported. |
| * |
| * Calling setCameraMute(true) when this returns false will return an |
| * INVALID_OPERATION error. |
| */ |
| bool supportsCameraMute(); |
| |
| /** |
| * Mute the camera. |
| * |
| * When muted, black image data is output on all output streams. |
| */ |
| status_t setCameraMute(bool enabled); |
| |
| /** |
| * Enables/disables camera service watchdog |
| */ |
| status_t setCameraServiceWatchdog(bool enabled); |
| |
| // Set stream use case overrides |
| void setStreamUseCaseOverrides( |
| const std::vector<int64_t>& useCaseOverrides); |
| |
| // Clear stream use case overrides |
| void clearStreamUseCaseOverrides(); |
| |
| /** |
| * Whether the camera device supports zoom override. |
| */ |
| bool supportsZoomOverride(); |
| |
| // Set/reset zoom override |
| status_t setZoomOverride(int32_t zoomOverride); |
| |
| // Get the status trackeer for the camera device |
| wp<camera3::StatusTracker> getStatusTracker() { return mStatusTracker; } |
| |
| // Whether the device is in error state |
| bool hasDeviceError(); |
| |
| /** |
| * The injection camera session to replace the internal camera |
| * session. |
| */ |
| status_t injectCamera(const std::string& injectedCamId, |
| sp<CameraProviderManager> manager); |
| |
| /** |
| * Stop the injection camera and restore to internal camera session. |
| */ |
| status_t stopInjection(); |
| |
| /** |
| * Inject session params into the current client. |
| */ |
| status_t injectSessionParams(const CameraMetadata& sessionParams); |
| |
| protected: |
| status_t disconnectImpl(); |
| static status_t removeFwkOnlyRegionKeys(CameraMetadata *request); |
| |
| float getMaxPreviewFps(sp<camera3::Camera3OutputStreamInterface> stream); |
| |
| static const size_t kDumpLockAttempts = 10; |
| static const size_t kDumpSleepDuration = 100000; // 0.10 sec |
| static const nsecs_t kActiveTimeout = 500000000; // 500 ms |
| static const nsecs_t kMinWarnInflightDuration = 5000000000; // 5 s |
| static const size_t kInFlightWarnLimit = 30; |
| static const size_t kInFlightWarnLimitHighSpeed = 256; // batch size 32 * pipe depth 8 |
| static const nsecs_t kMinInflightDuration = 5000000000; // 5 s |
| static const nsecs_t kBaseGetBufferWait = 3000000000; // 3 sec. |
| // SCHED_FIFO priority for request submission thread in HFR mode |
| static const int kRequestThreadPriority = 1; |
| |
| struct RequestTrigger; |
| // minimal jpeg buffer size: 256KB + blob header |
| static const ssize_t kMinJpegBufferSize = |
| 256 * 1024 + sizeof(aidl::android::hardware::camera::device::CameraBlob); |
| // Constant to use for stream ID when one doesn't exist |
| static const int NO_STREAM = -1; |
| |
| std::shared_ptr<CameraServiceProxyWrapper> mCameraServiceProxyWrapper; |
| |
| // A lock to enforce serialization on the input/configure side |
| // of the public interface. |
| // Only locked by public methods inherited from CameraDeviceBase. |
| // Not locked by methods guarded by mOutputLock, since they may act |
| // concurrently to the input/configure side of the interface. |
| // Must be locked before mLock if both will be locked by a method |
| Mutex mInterfaceLock; |
| |
| // The main lock on internal state |
| Mutex mLock; |
| |
| // Camera device ID |
| const std::string mId; |
| |
| // Legacy camera client flag |
| bool mLegacyClient; |
| |
| // Current stream configuration mode; |
| int mOperatingMode; |
| // Current session wide parameters |
| hardware::camera2::impl::CameraMetadataNative mSessionParams; |
| // Constant to use for no set operating mode |
| static const int NO_MODE = -1; |
| |
| // Flag indicating is the current active stream configuration is constrained high speed. |
| bool mIsConstrainedHighSpeedConfiguration; |
| |
| /**** Scope for mLock ****/ |
| |
| class HalInterface : public camera3::Camera3StreamBufferFreedListener, |
| public camera3::BufferRecordsInterface { |
| public: |
| HalInterface(bool useHalBufManager, bool supportOfflineProcessing) : |
| mUseHalBufManager(useHalBufManager), |
| mIsReconfigurationQuerySupported(true), |
| mSupportOfflineProcessing(supportOfflineProcessing) |
| {}; |
| HalInterface(const HalInterface &other); |
| HalInterface(); |
| |
| virtual IPCTransport getTransportType() const = 0; |
| |
| // Returns true if constructed with a valid device or session, and not yet cleared |
| virtual bool valid() = 0; |
| |
| // Reset this HalInterface object (does not call close()) |
| virtual void clear() = 0; |
| |
| // Calls into the HAL interface |
| |
| // Caller takes ownership of requestTemplate |
| virtual status_t constructDefaultRequestSettings(camera_request_template templateId, |
| /*out*/ camera_metadata_t **requestTemplate) = 0; |
| |
| virtual status_t configureStreams(const camera_metadata_t * sessionParams, |
| /*inout*/ camera_stream_configuration_t * config, |
| const std::vector<uint32_t>& bufferSizes, int64_t logId) = 0; |
| |
| // The injection camera configures the streams to hal. |
| virtual status_t configureInjectedStreams( |
| const camera_metadata_t* sessionParams, |
| /*inout*/ camera_stream_configuration_t* config, |
| const std::vector<uint32_t>& bufferSizes, |
| const CameraMetadata& cameraCharacteristics) = 0; |
| |
| // When the call succeeds, the ownership of acquire fences in requests is transferred to |
| // HalInterface. More specifically, the current implementation will send the fence to |
| // HAL process and close the FD in cameraserver process. When the call fails, the ownership |
| // of the acquire fence still belongs to the caller. |
| virtual status_t processBatchCaptureRequests( |
| std::vector<camera_capture_request_t*>& requests, |
| /*out*/uint32_t* numRequestProcessed) = 0; |
| |
| virtual status_t flush() = 0; |
| |
| virtual status_t dump(int fd) = 0; |
| |
| virtual status_t close() = 0; |
| |
| virtual void signalPipelineDrain(const std::vector<int>& streamIds) = 0; |
| |
| virtual bool isReconfigurationRequired(CameraMetadata& oldSessionParams, |
| CameraMetadata& newSessionParams) = 0; |
| |
| virtual status_t repeatingRequestEnd(uint32_t frameNumber, |
| const std::vector<int32_t> &streamIds) = 0; |
| |
| ///////////////////////////////////////////////////////////////////// |
| // Implements BufferRecordsInterface |
| |
| std::pair<bool, uint64_t> getBufferId( |
| const buffer_handle_t& buf, int streamId) override; |
| |
| uint64_t removeOneBufferCache(int streamId, const native_handle_t* handle) override; |
| |
| status_t popInflightBuffer(int32_t frameNumber, int32_t streamId, |
| /*out*/ buffer_handle_t **buffer) override; |
| |
| status_t pushInflightRequestBuffer( |
| uint64_t bufferId, buffer_handle_t* buf, int32_t streamId) override; |
| |
| status_t popInflightRequestBuffer(uint64_t bufferId, |
| /*out*/ buffer_handle_t** buffer, |
| /*optional out*/ int32_t* streamId = nullptr) override; |
| |
| ///////////////////////////////////////////////////////////////////// |
| |
| // Get a vector of (frameNumber, streamId) pair of currently inflight |
| // buffers |
| void getInflightBufferKeys(std::vector<std::pair<int32_t, int32_t>>* out); |
| |
| // Get a vector of bufferId of currently inflight buffers |
| void getInflightRequestBufferKeys(std::vector<uint64_t>* out); |
| |
| void onStreamReConfigured(int streamId); |
| |
| protected: |
| |
| // Return true if the input caches match what we have; otherwise false |
| bool verifyBufferIds(int32_t streamId, std::vector<uint64_t>& inBufIds); |
| |
| template <typename OfflineSessionInfoT> |
| status_t verifyBufferCaches( |
| const OfflineSessionInfoT *offlineSessionInfo, camera3::BufferRecords *bufferRecords) { |
| // Validate buffer caches |
| std::vector<int32_t> streams; |
| streams.reserve(offlineSessionInfo->offlineStreams.size()); |
| for (auto offlineStream : offlineSessionInfo->offlineStreams) { |
| int32_t id = offlineStream.id; |
| streams.push_back(id); |
| // Verify buffer caches |
| std::vector<uint64_t> bufIds(offlineStream.circulatingBufferIds.begin(), |
| offlineStream.circulatingBufferIds.end()); |
| { |
| // Due to timing it is possible that we may not have any remaining pending |
| // capture requests that can update the caches on Hal side. This can result in |
| // buffer cache mismatch between the service and the Hal and must be accounted |
| // for. |
| std::lock_guard<std::mutex> l(mFreedBuffersLock); |
| for (const auto& it : mFreedBuffers) { |
| if (it.first == id) { |
| ALOGV("%s: stream ID %d buffer id %" PRIu64 " cache removal still " |
| "pending", __FUNCTION__, id, it.second); |
| const auto& cachedEntry = std::find(bufIds.begin(), bufIds.end(), |
| it.second); |
| if (cachedEntry != bufIds.end()) { |
| bufIds.erase(cachedEntry); |
| } else { |
| ALOGE("%s: stream ID %d buffer id %" PRIu64 " cache removal still " |
| "pending however buffer is no longer in the offline stream " |
| "info!", __FUNCTION__, id, it.second); |
| } |
| } |
| } |
| } |
| if (!verifyBufferIds(id, bufIds)) { |
| ALOGE("%s: stream ID %d buffer cache records mismatch!", __FUNCTION__, id); |
| return UNKNOWN_ERROR; |
| } |
| } |
| |
| // Move buffer records |
| bufferRecords->takeBufferCaches(mBufferRecords, streams); |
| bufferRecords->takeInflightBufferMap(mBufferRecords); |
| bufferRecords->takeRequestedBufferMap(mBufferRecords); |
| return OK; |
| } |
| |
| virtual void onBufferFreed(int streamId, const native_handle_t* handle) override; |
| |
| std::mutex mFreedBuffersLock; |
| std::vector<std::pair<int, uint64_t>> mFreedBuffers; |
| |
| // Keep track of buffer cache and inflight buffer records |
| camera3::BufferRecords mBufferRecords; |
| |
| uint32_t mNextStreamConfigCounter = 1; |
| |
| bool mUseHalBufManager = false; |
| bool mIsReconfigurationQuerySupported; |
| |
| const bool mSupportOfflineProcessing; |
| }; // class HalInterface |
| |
| sp<HalInterface> mInterface; |
| |
| CameraMetadata mDeviceInfo; |
| bool mSupportNativeZoomRatio; |
| bool mIsCompositeJpegRDisabled; |
| std::unordered_map<std::string, CameraMetadata> mPhysicalDeviceInfoMap; |
| |
| CameraMetadata mRequestTemplateCache[CAMERA_TEMPLATE_COUNT]; |
| |
| struct Size { |
| uint32_t width; |
| uint32_t height; |
| explicit Size(uint32_t w = 0, uint32_t h = 0) : width(w), height(h){} |
| }; |
| |
| enum Status { |
| STATUS_ERROR, |
| STATUS_UNINITIALIZED, |
| STATUS_UNCONFIGURED, |
| STATUS_CONFIGURED, |
| STATUS_ACTIVE |
| } mStatus; |
| |
| struct StatusInfo { |
| Status status; |
| bool isInternal; // status triggered by internal reconfigureCamera. |
| }; |
| |
| bool mStatusIsInternal; |
| |
| // Only clear mRecentStatusUpdates, mStatusWaiters from waitUntilStateThenRelock |
| Vector<StatusInfo> mRecentStatusUpdates; |
| int mStatusWaiters; |
| |
| Condition mStatusChanged; |
| |
| // Tracking cause of fatal errors when in STATUS_ERROR |
| std::string mErrorCause; |
| |
| camera3::StreamSet mOutputStreams; |
| sp<camera3::Camera3Stream> mInputStream; |
| bool mIsInputStreamMultiResolution; |
| SessionStatsBuilder mSessionStatsBuilder; |
| // Map from stream group ID to physical cameras backing the stream group |
| std::map<int32_t, std::set<std::string>> mGroupIdPhysicalCameraMap; |
| |
| int mNextStreamId; |
| bool mNeedConfig; |
| |
| int mFakeStreamId; |
| |
| // Whether to send state updates upstream |
| // Pause when doing transparent reconfiguration |
| bool mPauseStateNotify; |
| |
| // Need to hold on to stream references until configure completes. |
| Vector<sp<camera3::Camera3StreamInterface> > mDeletedStreams; |
| |
| // Whether the HAL will send partial result |
| bool mUsePartialResult; |
| |
| // Number of partial results that will be delivered by the HAL. |
| uint32_t mNumPartialResults; |
| |
| /**** End scope for mLock ****/ |
| |
| bool mDeviceTimeBaseIsRealtime; |
| // The offset converting from clock domain of other subsystem |
| // (video/hardware composer) to that of camera. Assumption is that this |
| // offset won't change during the life cycle of the camera device. In other |
| // words, camera device shouldn't be open during CPU suspend. |
| nsecs_t mTimestampOffset; |
| |
| class CaptureRequest : public LightRefBase<CaptureRequest> { |
| public: |
| PhysicalCameraSettingsList mSettingsList; |
| sp<camera3::Camera3Stream> mInputStream; |
| camera_stream_buffer_t mInputBuffer; |
| camera3::Size mInputBufferSize; |
| Vector<sp<camera3::Camera3OutputStreamInterface> > |
| mOutputStreams; |
| SurfaceMap mOutputSurfaces; |
| CaptureResultExtras mResultExtras; |
| // The number of requests that should be submitted to HAL at a time. |
| // For example, if batch size is 8, this request and the following 7 |
| // requests will be submitted to HAL at a time. The batch size for |
| // the following 7 requests will be ignored by the request thread. |
| int mBatchSize; |
| // Whether this request is from a repeating or repeating burst. |
| bool mRepeating; |
| // Whether this request has ROTATE_AND_CROP_AUTO set, so needs both |
| // overriding of ROTATE_AND_CROP value and adjustment of coordinates |
| // in several other controls in both the request and the result |
| bool mRotateAndCropAuto; |
| // Indicates that the ROTATE_AND_CROP value within 'mSettingsList' was modified |
| // irrespective of the original value. |
| bool mRotateAndCropChanged = false; |
| // Whether this request has AUTOFRAMING_AUTO set, so need to override the AUTOFRAMING value |
| // in the capture request. |
| bool mAutoframingAuto; |
| // Indicates that the auto framing value within 'mSettingsList' was modified |
| bool mAutoframingChanged = false; |
| |
| // Whether this capture request has its zoom ratio set to 1.0x before |
| // the framework overrides it for camera HAL consumption. |
| bool mZoomRatioIs1x; |
| // The systemTime timestamp when the request is created. |
| nsecs_t mRequestTimeNs; |
| |
| // Whether this capture request's distortion correction update has |
| // been done. |
| bool mDistortionCorrectionUpdated = false; |
| // Whether this capture request's rotation and crop update has been |
| // done. |
| bool mRotationAndCropUpdated = false; |
| // Whether this capture request's autoframing has been done. |
| bool mAutoframingUpdated = false; |
| // Whether this capture request's zoom ratio update has been done. |
| bool mZoomRatioUpdated = false; |
| // Whether this max resolution capture request's crop / metering region update has been |
| // done. |
| bool mUHRCropAndMeteringRegionsUpdated = false; |
| }; |
| typedef List<sp<CaptureRequest> > RequestList; |
| |
| status_t checkStatusOkToCaptureLocked(); |
| |
| status_t convertMetadataListToRequestListLocked( |
| const List<const PhysicalCameraSettingsList> &metadataList, |
| const std::list<const SurfaceMap> &surfaceMaps, |
| bool repeating, nsecs_t requestTimeNs, |
| /*out*/ |
| RequestList *requestList); |
| |
| void convertToRequestList(List<const PhysicalCameraSettingsList>& requestsList, |
| std::list<const SurfaceMap>& surfaceMaps, |
| const CameraMetadata& request); |
| |
| status_t submitRequestsHelper(const List<const PhysicalCameraSettingsList> &requestsList, |
| const std::list<const SurfaceMap> &surfaceMaps, |
| bool repeating, |
| int64_t *lastFrameNumber = NULL); |
| |
| // lock to ensure only one processCaptureResult is called at a time. |
| Mutex mProcessCaptureResultLock; |
| |
| /** |
| * Common initialization code shared by both HAL paths |
| * |
| * Must be called with mLock and mInterfaceLock held. |
| */ |
| status_t initializeCommonLocked(); |
| |
| /** |
| * Update capture request list so that each batch size honors the batch_size_max report from |
| * the HAL. Set the batch size to output stream for buffer operations. |
| * |
| * Must be called with mLock held. |
| */ |
| virtual void applyMaxBatchSizeLocked( |
| RequestList* requestList, const sp<camera3::Camera3OutputStreamInterface>& stream) = 0; |
| |
| /** |
| * Get the last request submitted to the hal by the request thread. |
| * |
| * Must be called with mLock held. |
| */ |
| virtual CameraMetadata getLatestRequestLocked(); |
| |
| virtual status_t injectionCameraInitialize(const std::string &injectCamId, |
| sp<CameraProviderManager> manager) = 0; |
| |
| /** |
| * Update the current device status and wake all waiting threads. |
| * |
| * Must be called with mLock held. |
| */ |
| void internalUpdateStatusLocked(Status status); |
| |
| /** |
| * Pause processing and flush everything, but don't tell the clients. |
| * This is for reconfiguring outputs transparently when according to the |
| * CameraDeviceBase interface we shouldn't need to. |
| * Must be called with mLock and mInterfaceLock both held. |
| */ |
| status_t internalPauseAndWaitLocked(nsecs_t maxExpectedDuration, |
| bool requestThreadInvocation); |
| |
| /** |
| * Resume work after internalPauseAndWaitLocked() |
| * Must be called with mLock and mInterfaceLock both held. |
| */ |
| status_t internalResumeLocked(); |
| |
| /** |
| * Wait until status tracker tells us we've transitioned to the target state |
| * set, which is either ACTIVE when active==true or IDLE (which is any |
| * non-ACTIVE state) when active==false. |
| * |
| * Needs to be called with mLock and mInterfaceLock held. This means there |
| * can ever only be one waiter at most. |
| * |
| * During the wait mLock is released. |
| * |
| */ |
| status_t waitUntilStateThenRelock(bool active, nsecs_t timeout, |
| bool requestThreadInvocation); |
| |
| /** |
| * Implementation of waitUntilDrained. On success, will transition to IDLE state. |
| * |
| * Need to be called with mLock and mInterfaceLock held. |
| */ |
| status_t waitUntilDrainedLocked(nsecs_t maxExpectedDuration); |
| |
| /** |
| * Do common work for setting up a streaming or single capture request. |
| * On success, will transition to ACTIVE if in IDLE. |
| */ |
| sp<CaptureRequest> setUpRequestLocked(const PhysicalCameraSettingsList &request, |
| const SurfaceMap &surfaceMap); |
| |
| /** |
| * Build a CaptureRequest request from the CameraDeviceBase request |
| * settings. |
| */ |
| sp<CaptureRequest> createCaptureRequest(const PhysicalCameraSettingsList &request, |
| const SurfaceMap &surfaceMap); |
| |
| /** |
| * Internally re-configure camera device using new session parameters. |
| * This will get triggered by the request thread. |
| */ |
| bool reconfigureCamera(const CameraMetadata& sessionParams, int clientStatusId); |
| |
| /** |
| * Return true in case of any output or input abandoned streams, |
| * otherwise return false. |
| */ |
| bool checkAbandonedStreamsLocked(); |
| |
| /** |
| * Filter stream session parameters and configure camera HAL. |
| */ |
| status_t filterParamsAndConfigureLocked(const CameraMetadata& sessionParams, |
| int operatingMode); |
| |
| /** |
| * Take the currently-defined set of streams and configure the HAL to use |
| * them. This is a long-running operation (may be several hundered ms). |
| */ |
| status_t configureStreamsLocked(int operatingMode, |
| const CameraMetadata& sessionParams, bool notifyRequestThread = true); |
| |
| /** |
| * Cancel stream configuration that did not finish successfully. |
| */ |
| void cancelStreamsConfigurationLocked(); |
| |
| /** |
| * Add a fake stream to the current stream set as a workaround for |
| * not allowing 0 streams in the camera HAL spec. |
| */ |
| status_t addFakeStreamLocked(); |
| |
| /** |
| * Remove a fake stream if the current config includes real streams. |
| */ |
| status_t tryRemoveFakeStreamLocked(); |
| |
| /** |
| * Set device into an error state due to some fatal failure, and set an |
| * error message to indicate why. Only the first call's message will be |
| * used. The message is also sent to the log. |
| */ |
| void setErrorState(const char *fmt, ...) override; |
| void setErrorStateLocked(const char *fmt, ...) override; |
| void setErrorStateV(const char *fmt, va_list args); |
| void setErrorStateLockedV(const char *fmt, va_list args); |
| |
| ///////////////////////////////////////////////////////////////////// |
| // Implements InflightRequestUpdateInterface |
| |
| void onInflightEntryRemovedLocked(nsecs_t duration) override; |
| void checkInflightMapLengthLocked() override; |
| void onInflightMapFlushedLocked() override; |
| |
| ///////////////////////////////////////////////////////////////////// |
| |
| /** |
| * Debugging trylock/spin method |
| * Try to acquire a lock a few times with sleeps between before giving up. |
| */ |
| bool tryLockSpinRightRound(Mutex& lock); |
| |
| /** |
| * Helper function to get the offset between MONOTONIC and BOOTTIME |
| * timestamp. |
| */ |
| static nsecs_t getMonoToBoottimeOffset(); |
| |
| // Override rotate_and_crop control if needed |
| static bool overrideAutoRotateAndCrop(const sp<CaptureRequest> &request /*out*/, |
| bool overrideToPortrait, |
| camera_metadata_enum_android_scaler_rotate_and_crop_t rotateAndCropOverride); |
| |
| // Override auto framing control if needed |
| static bool overrideAutoframing(const sp<CaptureRequest> &request /*out*/, |
| camera_metadata_enum_android_control_autoframing_t autoframingOverride); |
| |
| struct RequestTrigger { |
| // Metadata tag number, e.g. android.control.aePrecaptureTrigger |
| uint32_t metadataTag; |
| // Metadata value, e.g. 'START' or the trigger ID |
| int32_t entryValue; |
| |
| // The last part of the fully qualified path, e.g. afTrigger |
| const char *getTagName() const { |
| return get_camera_metadata_tag_name(metadataTag) ?: "NULL"; |
| } |
| |
| // e.g. TYPE_BYTE, TYPE_INT32, etc. |
| int getTagType() const { |
| return get_camera_metadata_tag_type(metadataTag); |
| } |
| }; |
| |
| /** |
| * Thread for managing capture request submission to HAL device. |
| */ |
| class RequestThread : public Thread { |
| |
| public: |
| |
| RequestThread(wp<Camera3Device> parent, |
| sp<camera3::StatusTracker> statusTracker, |
| sp<HalInterface> interface, |
| const Vector<int32_t>& sessionParamKeys, |
| bool useHalBufManager, |
| bool supportCameraMute, |
| bool overrideToPortrait, |
| bool supportSettingsOverride); |
| ~RequestThread(); |
| |
| void setNotificationListener(wp<NotificationListener> listener); |
| |
| /** |
| * Call after stream (re)-configuration is completed. |
| */ |
| void configurationComplete(bool isConstrainedHighSpeed, |
| const CameraMetadata& sessionParams, |
| const std::map<int32_t, std::set<std::string>>& groupIdPhysicalCameraMap); |
| |
| /** |
| * Set or clear the list of repeating requests. Does not block |
| * on either. Use waitUntilPaused to wait until request queue |
| * has emptied out. |
| */ |
| status_t setRepeatingRequests(const RequestList& requests, |
| /*out*/ |
| int64_t *lastFrameNumber = NULL); |
| status_t clearRepeatingRequests(/*out*/ |
| int64_t *lastFrameNumber = NULL); |
| |
| status_t queueRequestList(List<sp<CaptureRequest> > &requests, |
| /*out*/ |
| int64_t *lastFrameNumber = NULL); |
| |
| /** |
| * Remove all queued and repeating requests, and pending triggers |
| */ |
| status_t clear(/*out*/int64_t *lastFrameNumber = NULL); |
| |
| /** |
| * Flush all pending requests in HAL. |
| */ |
| status_t flush(); |
| |
| /** |
| * Queue a trigger to be dispatched with the next outgoing |
| * process_capture_request. The settings for that request only |
| * will be temporarily rewritten to add the trigger tag/value. |
| * Subsequent requests will not be rewritten (for this tag). |
| */ |
| status_t queueTrigger(RequestTrigger trigger[], size_t count); |
| |
| /** |
| * Pause/unpause the capture thread. Doesn't block, so use |
| * waitUntilPaused to wait until the thread is paused. |
| */ |
| void setPaused(bool paused); |
| |
| /** |
| * Set Hal buffer manager behavior |
| * @param enabled Whether HAL buffer manager is enabled for the current session. |
| * |
| */ |
| void setHalBufferManager(bool enabled); |
| |
| /** |
| * Wait until thread processes the capture request with settings' |
| * android.request.id == requestId. |
| * |
| * Returns TIMED_OUT in case the thread does not process the request |
| * within the timeout. |
| */ |
| status_t waitUntilRequestProcessed(int32_t requestId, nsecs_t timeout); |
| |
| /** |
| * Shut down the thread. Shutdown is asynchronous, so thread may |
| * still be running once this method returns. |
| */ |
| virtual void requestExit(); |
| |
| /** |
| * Get the latest request that was sent to the HAL |
| * with process_capture_request. |
| */ |
| CameraMetadata getLatestRequest() const; |
| |
| /** |
| * Returns true if the stream is a target of any queued or repeating |
| * capture request |
| */ |
| bool isStreamPending(sp<camera3::Camera3StreamInterface>& stream); |
| |
| /** |
| * Returns true if the surface is a target of any queued or repeating |
| * capture request |
| */ |
| bool isOutputSurfacePending(int streamId, size_t surfaceId); |
| |
| // dump processCaptureRequest latency |
| void dumpCaptureRequestLatency(int fd, const char* name) { |
| mRequestLatency.dump(fd, name); |
| } |
| |
| void signalPipelineDrain(const std::vector<int>& streamIds); |
| void resetPipelineDrain(); |
| |
| void clearPreviousRequest(); |
| |
| status_t setRotateAndCropAutoBehavior( |
| camera_metadata_enum_android_scaler_rotate_and_crop_t rotateAndCropValue); |
| |
| status_t setAutoframingAutoBehaviour( |
| camera_metadata_enum_android_control_autoframing_t autoframingValue); |
| |
| status_t setComposerSurface(bool composerSurfacePresent); |
| |
| status_t setCameraMute(int32_t muteMode); |
| |
| status_t setZoomOverride(int32_t zoomOverride); |
| |
| status_t setHalInterface(sp<HalInterface> newHalInterface); |
| |
| status_t setInjectedSessionParams(const CameraMetadata& sessionParams); |
| |
| void injectSessionParams( |
| const sp<CaptureRequest> &request, |
| const CameraMetadata& injectedSessionParams); |
| |
| protected: |
| |
| virtual bool threadLoop(); |
| |
| static const std::string& getId(const wp<Camera3Device> &device); |
| |
| status_t queueTriggerLocked(RequestTrigger trigger); |
| // Mix-in queued triggers into this request |
| int32_t insertTriggers(const sp<CaptureRequest> &request); |
| // Purge the queued triggers from this request, |
| // restoring the old field values for those tags. |
| status_t removeTriggers(const sp<CaptureRequest> &request); |
| |
| // HAL workaround: Make sure a trigger ID always exists if |
| // a trigger does |
| status_t addFakeTriggerIds(const sp<CaptureRequest> &request); |
| |
| // Override rotate_and_crop control if needed; returns true if the current value was changed |
| bool overrideAutoRotateAndCrop(const sp<CaptureRequest> &request /*out*/); |
| |
| // Override autoframing control if needed; returns true if the current value was changed |
| bool overrideAutoframing(const sp<CaptureRequest> &request); |
| |
| // Override test_pattern control if needed for camera mute; returns true |
| // if the current value was changed |
| bool overrideTestPattern(const sp<CaptureRequest> &request); |
| |
| // Override settings override if needed for lower zoom latency; return |
| // true if the current value was changed |
| bool overrideSettingsOverride(const sp<CaptureRequest> &request); |
| |
| static const nsecs_t kRequestTimeout = 50e6; // 50 ms |
| |
| // TODO: does this need to be adjusted for long exposure requests? |
| static const nsecs_t kRequestSubmitTimeout = 200e6; // 200 ms |
| |
| // Used to prepare a batch of requests. |
| struct NextRequest { |
| sp<CaptureRequest> captureRequest; |
| camera_capture_request_t halRequest; |
| Vector<camera_stream_buffer_t> outputBuffers; |
| bool submitted; |
| }; |
| |
| // Wait for the next batch of requests and put them in mNextRequests. mNextRequests will |
| // be empty if it times out. |
| void waitForNextRequestBatch(); |
| |
| // Waits for a request, or returns NULL if times out. Must be called with mRequestLock hold. |
| sp<CaptureRequest> waitForNextRequestLocked(); |
| |
| // Prepare HAL requests and output buffers in mNextRequests. Return TIMED_OUT if getting any |
| // output buffer timed out. If an error is returned, the caller should clean up the pending |
| // request batch. |
| status_t prepareHalRequests(); |
| |
| // Return buffers, etc, for requests in mNextRequests that couldn't be fully constructed and |
| // send request errors if sendRequestError is true. The buffers will be returned in the |
| // ERROR state to mark them as not having valid data. mNextRequests will be cleared. |
| void cleanUpFailedRequests(bool sendRequestError); |
| |
| // Stop the repeating request if any of its output streams is abandoned. |
| void checkAndStopRepeatingRequest(); |
| |
| // Release physical camera settings and camera id resources. |
| void cleanupPhysicalSettings(sp<CaptureRequest> request, |
| /*out*/camera_capture_request_t *halRequest); |
| |
| // Pause handling |
| bool waitIfPaused(); |
| void unpauseForNewRequests(); |
| |
| // Relay error to parent device object setErrorState |
| void setErrorState(const char *fmt, ...); |
| |
| // If the input request is in mRepeatingRequests. Must be called with mRequestLock hold |
| bool isRepeatingRequestLocked(const sp<CaptureRequest>&); |
| |
| // Clear repeating requests. Must be called with mRequestLock held. |
| status_t clearRepeatingRequestsLocked(/*out*/ int64_t *lastFrameNumber = NULL); |
| |
| // send request in mNextRequests to HAL in a batch. Return true = sucssess |
| bool sendRequestsBatch(); |
| |
| // Calculate the expected (minimum, maximum, isFixedFps) duration info for a request |
| struct ExpectedDurationInfo { |
| nsecs_t minDuration; |
| nsecs_t maxDuration; |
| bool isFixedFps; |
| }; |
| ExpectedDurationInfo calculateExpectedDurationRange( |
| const camera_metadata_t *request); |
| |
| // Check and update latest session parameters based on the current request settings. |
| bool updateSessionParameters(const CameraMetadata& settings); |
| |
| // Check whether FPS range session parameter re-configuration is needed in constrained |
| // high speed recording camera sessions. |
| bool skipHFRTargetFPSUpdate(int32_t tag, const camera_metadata_ro_entry_t& newEntry, |
| const camera_metadata_entry_t& currentEntry); |
| |
| // Update next request sent to HAL |
| void updateNextRequest(NextRequest& nextRequest); |
| |
| wp<Camera3Device> mParent; |
| wp<camera3::StatusTracker> mStatusTracker; |
| sp<HalInterface> mInterface; |
| |
| wp<NotificationListener> mListener; |
| |
| const std::string mId; // The camera ID |
| int mStatusId; // The RequestThread's component ID for |
| // status tracking |
| |
| Mutex mRequestLock; |
| Condition mRequestSignal; |
| bool mRequestClearing; |
| |
| Condition mRequestSubmittedSignal; |
| RequestList mRequestQueue; |
| RequestList mRepeatingRequests; |
| bool mFirstRepeating; |
| // The next batch of requests being prepped for submission to the HAL, no longer |
| // on the request queue. Read-only even with mRequestLock held, outside |
| // of threadLoop |
| Vector<NextRequest> mNextRequests; |
| |
| // To protect flush() and sending a request batch to HAL. |
| Mutex mFlushLock; |
| |
| bool mReconfigured; |
| |
| // Used by waitIfPaused, waitForNextRequest, waitUntilPaused, and signalPipelineDrain |
| Mutex mPauseLock; |
| bool mDoPause; |
| Condition mDoPauseSignal; |
| bool mPaused; |
| bool mNotifyPipelineDrain; |
| std::vector<int> mStreamIdsToBeDrained; |
| |
| sp<CaptureRequest> mPrevRequest; |
| int32_t mPrevTriggers; |
| std::set<std::string> mPrevCameraIdsWithZoom; |
| |
| uint32_t mFrameNumber; |
| |
| mutable Mutex mLatestRequestMutex; |
| Condition mLatestRequestSignal; |
| // android.request.id for latest process_capture_request |
| int32_t mLatestRequestId; |
| int32_t mLatestFailedRequestId; |
| CameraMetadata mLatestRequest; |
| std::unordered_map<std::string, CameraMetadata> mLatestPhysicalRequest; |
| |
| typedef KeyedVector<uint32_t/*tag*/, RequestTrigger> TriggerMap; |
| Mutex mTriggerMutex; |
| TriggerMap mTriggerMap; |
| TriggerMap mTriggerRemovedMap; |
| TriggerMap mTriggerReplacedMap; |
| uint32_t mCurrentAfTriggerId; |
| uint32_t mCurrentPreCaptureTriggerId; |
| camera_metadata_enum_android_scaler_rotate_and_crop_t mRotateAndCropOverride; |
| camera_metadata_enum_android_control_autoframing_t mAutoframingOverride; |
| bool mComposerOutput; |
| int32_t mCameraMute; // 0 = no mute, otherwise the TEST_PATTERN_MODE to use |
| int32_t mSettingsOverride; // -1 = use original, otherwise |
| // the settings override to use. |
| |
| int64_t mRepeatingLastFrameNumber; |
| |
| // Flag indicating if we should prepare video stream for video requests. |
| bool mPrepareVideoStream; |
| |
| bool mConstrainedMode; |
| |
| static const int32_t kRequestLatencyBinSize = 40; // in ms |
| CameraLatencyHistogram mRequestLatency; |
| |
| Vector<int32_t> mSessionParamKeys; |
| CameraMetadata mLatestSessionParams; |
| CameraMetadata mInjectedSessionParams; |
| bool mForceNewRequestAfterReconfigure; |
| |
| std::map<int32_t, std::set<std::string>> mGroupIdPhysicalCameraMap; |
| |
| bool mUseHalBufManager = false; |
| const bool mSupportCameraMute; |
| const bool mOverrideToPortrait; |
| const bool mSupportSettingsOverride; |
| int32_t mVndkVersion = -1; |
| }; |
| |
| virtual sp<RequestThread> createNewRequestThread(wp<Camera3Device> /*parent*/, |
| sp<camera3::StatusTracker> /*statusTracker*/, |
| sp<HalInterface> /*interface*/, |
| const Vector<int32_t>& /*sessionParamKeys*/, |
| bool /*useHalBufManager*/, |
| bool /*supportCameraMute*/, |
| bool /*overrideToPortrait*/, |
| bool /*supportSettingsOverride*/) = 0; |
| |
| sp<RequestThread> mRequestThread; |
| |
| /** |
| * In-flight queue for tracking completion of capture requests. |
| */ |
| std::mutex mInFlightLock; |
| camera3::InFlightRequestMap mInFlightMap; |
| nsecs_t mExpectedInflightDuration = 0; |
| int64_t mLastCompletedRegularFrameNumber = -1; |
| int64_t mLastCompletedReprocessFrameNumber = -1; |
| int64_t mLastCompletedZslFrameNumber = -1; |
| // End of mInFlightLock protection scope |
| |
| int mInFlightStatusId; // const after initialize |
| |
| status_t registerInFlight(uint32_t frameNumber, |
| int32_t numBuffers, CaptureResultExtras resultExtras, bool hasInput, |
| bool callback, nsecs_t minExpectedDuration, nsecs_t maxExpectedDuration, |
| bool isFixedFps, const std::set<std::set<std::string>>& physicalCameraIds, |
| bool isStillCapture, bool isZslCapture, bool rotateAndCropAuto, bool autoframingAuto, |
| const std::set<std::string>& cameraIdsWithZoom, const SurfaceMap& outputSurfaces, |
| nsecs_t requestTimeNs); |
| |
| /** |
| * Tracking for idle detection |
| */ |
| sp<camera3::StatusTracker> mStatusTracker; |
| |
| /** |
| * Graphic buffer manager for output streams. Each device has a buffer manager, which is used |
| * by the output streams to get and return buffers if these streams are registered to this |
| * buffer manager. |
| */ |
| sp<camera3::Camera3BufferManager> mBufferManager; |
| |
| /** |
| * Thread for preparing streams |
| */ |
| class PreparerThread : private Thread, public virtual RefBase { |
| public: |
| PreparerThread(); |
| ~PreparerThread(); |
| |
| void setNotificationListener(wp<NotificationListener> listener); |
| |
| /** |
| * Queue up a stream to be prepared. Streams are processed by a background thread in FIFO |
| * order. Pre-allocate up to maxCount buffers for the stream, or the maximum number needed |
| * for the pipeline if maxCount is ALLOCATE_PIPELINE_MAX. |
| */ |
| status_t prepare(int maxCount, sp<camera3::Camera3StreamInterface>& stream); |
| |
| /** |
| * Cancel all current and pending stream preparation |
| */ |
| status_t clear(); |
| |
| /** |
| * Pause all preparation activities |
| */ |
| void pause(); |
| |
| /** |
| * Resume preparation activities |
| */ |
| status_t resume(); |
| |
| private: |
| Mutex mLock; |
| Condition mThreadActiveSignal; |
| |
| virtual bool threadLoop(); |
| |
| // Guarded by mLock |
| |
| wp<NotificationListener> mListener; |
| std::list<std::tuple<int, sp<camera3::Camera3StreamInterface>>> mPendingStreams; |
| bool mActive; |
| bool mCancelNow; |
| |
| // Only accessed by threadLoop and the destructor |
| |
| sp<camera3::Camera3StreamInterface> mCurrentStream; |
| int mCurrentMaxCount; |
| bool mCurrentPrepareComplete; |
| }; |
| sp<PreparerThread> mPreparerThread; |
| |
| /** |
| * Output result queue and current HAL device 3A state |
| */ |
| |
| // Lock for output side of device |
| std::mutex mOutputLock; |
| |
| /**** Scope for mOutputLock ****/ |
| // the minimal frame number of the next non-reprocess result |
| uint32_t mNextResultFrameNumber; |
| // the minimal frame number of the next reprocess result |
| uint32_t mNextReprocessResultFrameNumber; |
| // the minimal frame number of the next ZSL still capture result |
| uint32_t mNextZslStillResultFrameNumber; |
| // the minimal frame number of the next non-reprocess shutter |
| uint32_t mNextShutterFrameNumber; |
| // the minimal frame number of the next reprocess shutter |
| uint32_t mNextReprocessShutterFrameNumber; |
| // the minimal frame number of the next ZSL still capture shutter |
| uint32_t mNextZslStillShutterFrameNumber; |
| std::list<CaptureResult> mResultQueue; |
| std::condition_variable mResultSignal; |
| wp<NotificationListener> mListener; |
| |
| /**** End scope for mOutputLock ****/ |
| |
| /**** Scope for mInFlightLock ****/ |
| |
| // Remove the in-flight map entry of the given index from mInFlightMap. |
| // It must only be called with mInFlightLock held. |
| void removeInFlightMapEntryLocked(int idx); |
| |
| // Remove all in-flight requests and return all buffers. |
| // This is used after HAL interface is closed to cleanup any request/buffers |
| // not returned by HAL. |
| void flushInflightRequests(); |
| |
| /**** End scope for mInFlightLock ****/ |
| |
| /** |
| * Distortion correction support |
| */ |
| // Map from camera IDs to its corresponding distortion mapper. Only contains |
| // 1 ID if the device isn't a logical multi-camera. Otherwise contains both |
| // logical camera and its physical subcameras. |
| std::unordered_map<std::string, camera3::DistortionMapper> mDistortionMappers; |
| |
| /** |
| * Zoom ratio mapper support |
| */ |
| std::unordered_map<std::string, camera3::ZoomRatioMapper> mZoomRatioMappers; |
| |
| /** |
| * UHR request crop / metering region mapper support |
| */ |
| std::unordered_map<std::string, camera3::UHRCropAndMeteringRegionMapper> |
| mUHRCropAndMeteringRegionMappers; |
| |
| /** |
| * RotateAndCrop mapper support |
| */ |
| std::unordered_map<std::string, camera3::RotateAndCropMapper> mRotateAndCropMappers; |
| |
| // Debug tracker for metadata tag value changes |
| // - Enabled with the -m <taglist> option to dumpsys, such as |
| // dumpsys -m android.control.aeState,android.control.aeMode |
| // - Disabled with -m off |
| // - dumpsys -m 3a is a shortcut for ae/af/awbMode, State, and Triggers |
| TagMonitor mTagMonitor; |
| |
| void monitorMetadata(TagMonitor::eventSource source, int64_t frameNumber, |
| nsecs_t timestamp, const CameraMetadata& metadata, |
| const std::unordered_map<std::string, CameraMetadata>& physicalMetadata, |
| const camera_stream_buffer_t *outputBuffers, uint32_t numOutputBuffers, |
| int32_t inputStreamId); |
| |
| metadata_vendor_id_t mVendorTagId; |
| |
| // Cached last requested template id |
| int mLastTemplateId; |
| |
| // Synchronizes access to status tracker between inflight updates and disconnect. |
| // b/79972865 |
| Mutex mTrackerLock; |
| |
| // Whether HAL request buffers through requestStreamBuffers API |
| bool mUseHalBufManager = false; |
| bool mSessionHalBufManager = false; |
| // Lock to ensure requestStreamBuffers() callbacks are serialized |
| std::mutex mRequestBufferInterfaceLock; |
| |
| // The state machine to control when requestStreamBuffers should allow |
| // HAL to request buffers. |
| enum RequestBufferState { |
| /** |
| * This is the initial state. |
| * requestStreamBuffers call will return FAILED_CONFIGURING in this state. |
| * Will switch to RB_STATUS_READY after a successful configureStreams or |
| * processCaptureRequest call. |
| */ |
| RB_STATUS_STOPPED, |
| |
| /** |
| * requestStreamBuffers call will proceed in this state. |
| * When device is asked to stay idle via waitUntilStateThenRelock() call: |
| * - Switch to RB_STATUS_STOPPED if there is no inflight requests and |
| * request thread is paused. |
| * - Switch to RB_STATUS_PENDING_STOP otherwise |
| */ |
| RB_STATUS_READY, |
| |
| /** |
| * requestStreamBuffers call will proceed in this state. |
| * Switch to RB_STATUS_STOPPED when all inflight requests are fulfilled |
| * and request thread is paused |
| */ |
| RB_STATUS_PENDING_STOP, |
| }; |
| |
| class RequestBufferStateMachine { |
| public: |
| status_t initialize(sp<camera3::StatusTracker> statusTracker); |
| |
| status_t deInit(); |
| |
| // Return if the state machine currently allows for requestBuffers |
| // If the state allows for it, mRequestBufferOngoing will be set to true |
| // and caller must call endRequestBuffer() later to unset the flag |
| bool startRequestBuffer(); |
| void endRequestBuffer(); |
| |
| // Events triggered by application API call |
| void onStreamsConfigured(); |
| void onWaitUntilIdle(); |
| |
| // Events usually triggered by hwBinder processCaptureResult callback thread |
| // But can also be triggered on request thread for failed request, or on |
| // hwbinder notify callback thread for shutter/error callbacks |
| void onInflightMapEmpty(); |
| |
| // Events triggered by RequestThread |
| void onSubmittingRequest(); |
| void onRequestThreadPaused(); |
| |
| // Events triggered by successful switchToOffline call |
| // Return true is there is no ongoing requestBuffer call. |
| bool onSwitchToOfflineSuccess(); |
| |
| private: |
| void notifyTrackerLocked(bool active); |
| |
| // Switch to STOPPED state and return true if all conditions allows for it. |
| // Otherwise do nothing and return false. |
| bool checkSwitchToStopLocked(); |
| |
| std::mutex mLock; |
| RequestBufferState mStatus = RB_STATUS_STOPPED; |
| |
| bool mRequestThreadPaused = true; |
| bool mInflightMapEmpty = true; |
| bool mRequestBufferOngoing = false; |
| bool mSwitchedToOffline = false; |
| |
| wp<camera3::StatusTracker> mStatusTracker; |
| int mRequestBufferStatusId; |
| } mRequestBufferSM; |
| |
| // Fix up result metadata for monochrome camera. |
| bool mNeedFixupMonochromeTags; |
| |
| // Whether HAL supports offline processing capability. |
| bool mSupportOfflineProcessing = false; |
| |
| // Whether the HAL supports camera muting via test pattern |
| bool mSupportCameraMute = false; |
| // Whether the HAL supports SOLID_COLOR or BLACK if mSupportCameraMute is true |
| bool mSupportTestPatternSolidColor = false; |
| // Whether the HAL supports zoom settings override |
| bool mSupportZoomOverride = false; |
| |
| // Whether the camera framework overrides the device characteristics for |
| // performance class. |
| bool mOverrideForPerfClass; |
| |
| // Whether the camera framework overrides the device characteristics for |
| // app compatibility reasons. |
| bool mOverrideToPortrait; |
| camera_metadata_enum_android_scaler_rotate_and_crop_t mRotateAndCropOverride; |
| bool mComposerOutput; |
| |
| // Auto framing override value |
| camera_metadata_enum_android_control_autoframing mAutoframingOverride; |
| |
| // Settings override value |
| int32_t mSettingsOverride; // -1 = use original, otherwise |
| // the settings override to use. |
| |
| // Current active physical id of the logical multi-camera, if any |
| std::string mActivePhysicalId; |
| |
| // The current minimum expected frame duration based on AE_TARGET_FPS_RANGE |
| nsecs_t mMinExpectedDuration = 0; |
| // Whether the camera device runs at fixed frame rate based on AE_MODE and |
| // AE_TARGET_FPS_RANGE |
| bool mIsFixedFps = false; |
| |
| // Injection camera related methods. |
| class Camera3DeviceInjectionMethods : public virtual RefBase { |
| public: |
| Camera3DeviceInjectionMethods(wp<Camera3Device> parent); |
| |
| ~Camera3DeviceInjectionMethods(); |
| |
| // Injection camera will replace the internal camera and configure streams |
| // when device is IDLE and request thread is paused. |
| status_t injectCamera( |
| camera3::camera_stream_configuration& injectionConfig, |
| const std::vector<uint32_t>& injectionBufferSizes); |
| |
| // Stop the injection camera and switch back to backup hal interface. |
| status_t stopInjection(); |
| |
| bool isInjecting(); |
| |
| bool isStreamConfigCompleteButNotInjected(); |
| |
| const std::string& getInjectedCamId() const; |
| |
| void getInjectionConfig(/*out*/ camera3::camera_stream_configuration* injectionConfig, |
| /*out*/ std::vector<uint32_t>* injectionBufferSizes); |
| |
| // When the streaming configuration is completed and the camera device is active, but the |
| // injection camera has not yet been injected, the streaming configuration of the internal |
| // camera will be stored first. |
| void storeInjectionConfig( |
| const camera3::camera_stream_configuration& injectionConfig, |
| const std::vector<uint32_t>& injectionBufferSizes); |
| |
| protected: |
| // Configure the streams of injection camera, it need wait until the |
| // output streams are created and configured to the original camera before |
| // proceeding. |
| status_t injectionConfigureStreams( |
| camera3::camera_stream_configuration& injectionConfig, |
| const std::vector<uint32_t>& injectionBufferSizes); |
| |
| // Disconnect the injection camera and delete the hal interface. |
| void injectionDisconnectImpl(); |
| |
| // Use injection camera hal interface to replace and backup original |
| // camera hal interface. |
| virtual status_t replaceHalInterface(sp<HalInterface> /*newHalInterface*/, |
| bool /*keepBackup*/) = 0; |
| |
| wp<Camera3Device> mParent; |
| |
| // Backup of the original camera hal interface. |
| sp<HalInterface> mBackupHalInterface; |
| |
| // Generated injection camera hal interface. |
| sp<HalInterface> mInjectedCamHalInterface; |
| |
| // The flag indicates that the stream configuration is complete, the camera device is |
| // active, but the injection camera has not yet been injected. |
| bool mIsStreamConfigCompleteButNotInjected = false; |
| |
| // Copy the configuration of the internal camera. |
| camera3::camera_stream_configuration mInjectionConfig; |
| |
| // Copy the streams of the internal camera. |
| Vector<camera3::camera_stream_t*> mInjectionStreams; |
| |
| // Copy the bufferSizes of the output streams of the internal camera. |
| std::vector<uint32_t> mInjectionBufferSizes; |
| |
| // Synchronizes access to injection camera between initialize and |
| // disconnect. |
| Mutex mInjectionLock; |
| |
| // The injection camera ID. |
| std::string mInjectedCamId; |
| }; |
| |
| virtual sp<Camera3DeviceInjectionMethods> |
| createCamera3DeviceInjectionMethods(wp<Camera3Device>) = 0; |
| |
| sp<Camera3DeviceInjectionMethods> mInjectionMethods; |
| |
| void overrideStreamUseCaseLocked(); |
| |
| }; // class Camera3Device |
| |
| }; // namespace android |
| |
| #endif |