| // Copyright (C) 2018 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| package { |
| // See: http://go/android-license-faq |
| // A large-scale-change added 'default_applicable_licenses' to import |
| // all of the 'license_kinds' from "frameworks_av_license" |
| // to get the below license kinds: |
| // SPDX-license-identifier-Apache-2.0 |
| default_applicable_licenses: ["frameworks_av_license"], |
| } |
| |
| apex_defaults { |
| name: "com.android.media-defaults", |
| bootclasspath_fragments: ["com.android.media-bootclasspath-fragment"], |
| systemserverclasspath_fragments: ["com.android.media-systemserverclasspath-fragment"], |
| multilib: { |
| first: { |
| // Extractor process runs only with the primary ABI. |
| native_shared_libs: [ |
| // Extractor plugins |
| "libaacextractor", |
| "libamrextractor", |
| "libflacextractor", |
| "libmidiextractor", |
| "libmkvextractor", |
| "libmp3extractor", |
| "libmp4extractor", |
| "libmpeg2extractor", |
| "liboggextractor", |
| "libwavextractor", |
| ], |
| // Transcoding service only run with primary ABI. |
| binaries: [ |
| "mediatranscoding", |
| ], |
| }, |
| }, |
| // JNI |
| native_shared_libs: [ |
| "libmediaparser-jni", |
| "libmediaformatshaper", |
| ], |
| compile_multilib: "both", |
| prebuilts: [ |
| "code_coverage.policy", |
| "com.android.media-mediatranscoding.rc", |
| "com.android.media-mediatranscoding.32rc", |
| "crash_dump.policy", |
| "mediaextractor.policy", |
| "media-linker-config", |
| ], |
| key: "com.android.media.key", |
| certificate: ":com.android.media.certificate", |
| |
| // Use a custom AndroidManifest.xml used for API targeting. |
| androidManifest: ":com.android.media-androidManifest", |
| |
| // IMPORTANT: q-launched-dcla-enabled-apex-module enables the build system to make |
| // sure the package compatible to Android 10 in two ways(if flag APEX_BUILD_FOR_PRE_S_DEVICES=1 |
| // is set): |
| // - build the APEX package compatible to Android 10 |
| // so that the package can be installed. |
| // - build artifacts (lib/javalib/bin) against Android 10 SDK |
| // so that the artifacts can run. |
| // If the flag is not set, the package is built to be compatible with Android 12. |
| defaults: ["q-launched-dcla-enabled-apex-module"], |
| // Indicates that pre-installed version of this apex can be compressed. |
| // Whether it actually will be compressed is controlled on per-device basis. |
| compressible: true, |
| } |
| |
| apex { |
| name: "com.android.media", |
| manifest: "manifest.json", |
| defaults: ["com.android.media-defaults"], |
| prebuilts: ["current_sdkinfo"], |
| } |
| |
| linker_config { |
| name: "media-linker-config", |
| src: "linker.config.json", |
| installable: false, |
| } |
| |
| // Encapsulate the contributions made by the com.android.media to the bootclasspath. |
| bootclasspath_fragment { |
| name: "com.android.media-bootclasspath-fragment", |
| contents: ["updatable-media"], |
| apex_available: ["com.android.media"], |
| |
| api: { |
| stub_libs: [ |
| // Stubs for the APIs provided by updatable-media. This has to be |
| // specified explicitly because updatable-media is not a |
| // java_sdk_library. |
| "framework-media", |
| ], |
| }, |
| |
| // The bootclasspath_fragments that provide APIs on which this depends. |
| fragments: [ |
| { |
| apex: "com.android.art", |
| module: "art-bootclasspath-fragment", |
| }, |
| ], |
| |
| // Additional stubs libraries that this fragment's contents use which are |
| // not provided by another bootclasspath_fragment. |
| additional_stubs: [ |
| "android-non-updatable", |
| ], |
| |
| // Additional hidden API flag files to override the defaults. This must only be |
| // modified by the Soong or platform compat team. |
| hidden_api: { |
| max_target_o_low_priority: ["hiddenapi/hiddenapi-max-target-o-low-priority.txt"], |
| |
| // The following packages contain classes from other modules on the |
| // bootclasspath. That means that the hidden API flags for this module |
| // has to explicitly list every single class this module provides in |
| // that package to differentiate them from the classes provided by other |
| // modules. That can include private classes that are not part of the |
| // API. |
| split_packages: [ |
| "android.media", |
| ], |
| |
| // The following packages and all their subpackages currently only |
| // contain classes from this bootclasspath_fragment. Listing a package |
| // here won't prevent other bootclasspath modules from adding classes in |
| // any of those packages but it will prevent them from adding those |
| // classes into an API surface, e.g. public, system, etc.. Doing so will |
| // result in a build failure due to inconsistent flags. |
| package_prefixes: [ |
| "android.media.internal", |
| ], |
| }, |
| } |
| |
| // Encapsulate the contributions made by the com.android.media to the systemserverclasspath. |
| systemserverclasspath_fragment { |
| name: "com.android.media-systemserverclasspath-fragment", |
| contents: ["service-media-s"], |
| apex_available: ["com.android.media"], |
| } |
| |
| filegroup { |
| name: "com.android.media-androidManifest", |
| srcs: ["AndroidManifest-media.xml"], |
| } |
| |
| filegroup { |
| name: "com.android.media.swcodec-androidManifest", |
| srcs: ["AndroidManifest-swcodec.xml"], |
| } |
| |
| apex_defaults { |
| name: "com.android.media.swcodec-defaults", |
| binaries: [ |
| "mediaswcodec", |
| ], |
| native_shared_libs: [ |
| "libcodec2_hidl@1.0", |
| "libcodec2_hidl@1.1", |
| "libcodec2_hidl@1.2", |
| "libstagefright_foundation", |
| ], |
| prebuilts: [ |
| "com.android.media.swcodec-mediaswcodec.rc", |
| "com.android.media.swcodec-mediaswcodec.32rc", |
| "com.android.media.swcodec-ld.config.txt", |
| "mediaswcodec.policy", |
| "code_coverage.policy", |
| "crash_dump.policy", |
| "mediaswcodec.xml", |
| ], |
| key: "com.android.media.swcodec.key", |
| certificate: ":com.android.media.swcodec.certificate", |
| |
| // Use a custom AndroidManifest.xml used for API targeting. |
| androidManifest: ":com.android.media.swcodec-androidManifest", |
| |
| // IMPORTANT: q-launched-dcla-enabled-apex-module enables the build system to make |
| // sure the package compatible to Android 10 in two ways(if flag APEX_BUILD_FOR_PRE_S_DEVICES=1 |
| // is set): |
| // - build the APEX package compatible to Android 10 |
| // so that the package can be installed. |
| // - build artifacts (lib/javalib/bin) against Android 10 SDK |
| // so that the artifacts can run. |
| // If the flag is not set, the package is built to be compatible with Android 12. |
| defaults: ["q-launched-dcla-enabled-apex-module"], |
| // Indicates that pre-installed version of this apex can be compressed. |
| // Whether it actually will be compressed is controlled on per-device basis. |
| compressible: true, |
| } |
| |
| // install as mediatranscoding.* and mediaswcodec.* instead of init.* |
| // so we are ready for day we have more than 1 *rc file within the apex. |
| |
| prebuilt_etc { |
| name: "com.android.media-mediatranscoding.rc", |
| src: "mediatranscoding.rc", |
| filename: "mediatranscoding.rc", |
| installable: false, |
| } |
| |
| prebuilt_etc { |
| name: "com.android.media-mediatranscoding.32rc", |
| src: "mediatranscoding.32rc", |
| filename: "mediatranscoding.32rc", |
| installable: false, |
| } |
| |
| prebuilt_etc { |
| name: "com.android.media.swcodec-mediaswcodec.rc", |
| src: "mediaswcodec.rc", |
| filename: "mediaswcodec.rc", |
| installable: false, |
| } |
| |
| prebuilt_etc { |
| name: "com.android.media.swcodec-mediaswcodec.32rc", |
| src: "mediaswcodec.32rc", |
| filename: "mediaswcodec.32rc", |
| installable: false, |
| } |
| |
| prebuilt_etc { |
| name: "com.android.media.swcodec-ld.config.txt", |
| src: "ld.config.txt", |
| filename: "ld.config.txt", |
| installable: false, |
| } |
| |
| apex { |
| name: "com.android.media.swcodec", |
| manifest: "manifest_codec.json", |
| defaults: ["com.android.media.swcodec-defaults"], |
| } |
| |
| apex_key { |
| name: "com.android.media.key", |
| public_key: "com.android.media.avbpubkey", |
| private_key: "com.android.media.pem", |
| } |
| |
| apex_key { |
| name: "com.android.media.swcodec.key", |
| public_key: "com.android.media.swcodec.avbpubkey", |
| private_key: "com.android.media.swcodec.pem", |
| } |
| |
| android_app_certificate { |
| name: "com.android.media.certificate", |
| certificate: "com.android.media", |
| } |
| |
| android_app_certificate { |
| name: "com.android.media.swcodec.certificate", |
| certificate: "com.android.media.swcodec", |
| } |