| /* |
| ** |
| ** Copyright 2007, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| //#define LOG_NDEBUG 0 |
| #define LOG_TAG "AudioTrack" |
| |
| #include <inttypes.h> |
| #include <math.h> |
| #include <sys/resource.h> |
| #include <thread> |
| |
| #include <android/media/IAudioPolicyService.h> |
| #include <android-base/macros.h> |
| #include <android-base/stringprintf.h> |
| #include <audio_utils/clock.h> |
| #include <audio_utils/primitives.h> |
| #include <binder/IPCThreadState.h> |
| #include <binder/IServiceManager.h> |
| #include <media/AudioTrack.h> |
| #include <utils/Log.h> |
| #include <private/media/AudioTrackShared.h> |
| #include <processgroup/sched_policy.h> |
| #include <media/IAudioFlinger.h> |
| #include <media/AudioParameter.h> |
| #include <media/AudioResamplerPublic.h> |
| #include <media/AudioSystem.h> |
| #include <media/MediaMetricsItem.h> |
| #include <media/TypeConverter.h> |
| |
| #define WAIT_PERIOD_MS 10 |
| #define WAIT_STREAM_END_TIMEOUT_SEC 120 |
| |
| static const int kMaxLoopCountNotifications = 32; |
| static constexpr char kAudioServiceName[] = "audio"; |
| |
| using ::android::aidl_utils::statusTFromBinderStatus; |
| using ::android::base::StringPrintf; |
| |
| namespace android { |
| // --------------------------------------------------------------------------- |
| |
| using media::VolumeShaper; |
| using android::content::AttributionSourceState; |
| |
| // TODO: Move to a separate .h |
| |
| template <typename T> |
| static inline const T &min(const T &x, const T &y) { |
| return x < y ? x : y; |
| } |
| |
| template <typename T> |
| static inline const T &max(const T &x, const T &y) { |
| return x > y ? x : y; |
| } |
| |
| static inline nsecs_t framesToNanoseconds(ssize_t frames, uint32_t sampleRate, float speed) |
| { |
| return ((double)frames * 1000000000) / ((double)sampleRate * speed); |
| } |
| |
| static int64_t convertTimespecToUs(const struct timespec &tv) |
| { |
| return tv.tv_sec * 1000000LL + tv.tv_nsec / 1000; |
| } |
| |
| // TODO move to audio_utils. |
| static inline struct timespec convertNsToTimespec(int64_t ns) { |
| struct timespec tv; |
| tv.tv_sec = static_cast<time_t>(ns / NANOS_PER_SECOND); |
| tv.tv_nsec = static_cast<int64_t>(ns % NANOS_PER_SECOND); |
| return tv; |
| } |
| |
| // current monotonic time in microseconds. |
| static int64_t getNowUs() |
| { |
| struct timespec tv; |
| (void) clock_gettime(CLOCK_MONOTONIC, &tv); |
| return convertTimespecToUs(tv); |
| } |
| |
| // FIXME: we don't use the pitch setting in the time stretcher (not working); |
| // instead we emulate it using our sample rate converter. |
| static const bool kFixPitch = true; // enable pitch fix |
| static inline uint32_t adjustSampleRate(uint32_t sampleRate, float pitch) |
| { |
| return kFixPitch ? (sampleRate * pitch + 0.5) : sampleRate; |
| } |
| |
| static inline float adjustSpeed(float speed, float pitch) |
| { |
| return kFixPitch ? speed / max(pitch, AUDIO_TIMESTRETCH_PITCH_MIN_DELTA) : speed; |
| } |
| |
| static inline float adjustPitch(float pitch) |
| { |
| return kFixPitch ? AUDIO_TIMESTRETCH_PITCH_NORMAL : pitch; |
| } |
| |
| // static |
| status_t AudioTrack::getMinFrameCount( |
| size_t* frameCount, |
| audio_stream_type_t streamType, |
| uint32_t sampleRate) |
| { |
| if (frameCount == NULL) { |
| return BAD_VALUE; |
| } |
| |
| // FIXME handle in server, like createTrack_l(), possible missing info: |
| // audio_io_handle_t output |
| // audio_format_t format |
| // audio_channel_mask_t channelMask |
| // audio_output_flags_t flags (FAST) |
| uint32_t afSampleRate; |
| status_t status; |
| status = AudioSystem::getOutputSamplingRate(&afSampleRate, streamType); |
| if (status != NO_ERROR) { |
| ALOGE("%s(): Unable to query output sample rate for stream type %d; status %d", |
| __func__, streamType, status); |
| return status; |
| } |
| size_t afFrameCount; |
| status = AudioSystem::getOutputFrameCount(&afFrameCount, streamType); |
| if (status != NO_ERROR) { |
| ALOGE("%s(): Unable to query output frame count for stream type %d; status %d", |
| __func__, streamType, status); |
| return status; |
| } |
| uint32_t afLatency; |
| status = AudioSystem::getOutputLatency(&afLatency, streamType); |
| if (status != NO_ERROR) { |
| ALOGE("%s(): Unable to query output latency for stream type %d; status %d", |
| __func__, streamType, status); |
| return status; |
| } |
| |
| // When called from createTrack, speed is 1.0f (normal speed). |
| // This is rechecked again on setting playback rate (TODO: on setting sample rate, too). |
| *frameCount = AudioSystem::calculateMinFrameCount(afLatency, afFrameCount, afSampleRate, |
| sampleRate, 1.0f /*, 0 notificationsPerBufferReq*/); |
| |
| // The formula above should always produce a non-zero value under normal circumstances: |
| // AudioTrack.SAMPLE_RATE_HZ_MIN <= sampleRate <= AudioTrack.SAMPLE_RATE_HZ_MAX. |
| // Return error in the unlikely event that it does not, as that's part of the API contract. |
| if (*frameCount == 0) { |
| ALOGE("%s(): failed for streamType %d, sampleRate %u", |
| __func__, streamType, sampleRate); |
| return BAD_VALUE; |
| } |
| ALOGV("%s(): getMinFrameCount=%zu: afFrameCount=%zu, afSampleRate=%u, afLatency=%u", |
| __func__, *frameCount, afFrameCount, afSampleRate, afLatency); |
| return NO_ERROR; |
| } |
| |
| // static |
| bool AudioTrack::isDirectOutputSupported(const audio_config_base_t& config, |
| const audio_attributes_t& attributes) { |
| ALOGV("%s()", __FUNCTION__); |
| const sp<media::IAudioPolicyService>& aps = AudioSystem::get_audio_policy_service(); |
| if (aps == 0) return false; |
| |
| auto result = [&]() -> ConversionResult<bool> { |
| media::audio::common::AudioConfigBase configAidl = VALUE_OR_RETURN( |
| legacy2aidl_audio_config_base_t_AudioConfigBase(config, false /*isInput*/)); |
| media::audio::common::AudioAttributes attributesAidl = VALUE_OR_RETURN( |
| legacy2aidl_audio_attributes_t_AudioAttributes(attributes)); |
| bool retAidl; |
| RETURN_IF_ERROR(aidl_utils::statusTFromBinderStatus( |
| aps->isDirectOutputSupported(configAidl, attributesAidl, &retAidl))); |
| return retAidl; |
| }(); |
| return result.value_or(false); |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| void AudioTrack::MediaMetrics::gather(const AudioTrack *track) |
| { |
| // only if we're in a good state... |
| // XXX: shall we gather alternative info if failing? |
| const status_t lstatus = track->initCheck(); |
| if (lstatus != NO_ERROR) { |
| ALOGD("%s(): no metrics gathered, track status=%d", __func__, (int) lstatus); |
| return; |
| } |
| |
| #define MM_PREFIX "android.media.audiotrack." // avoid cut-n-paste errors. |
| |
| // Do not change this without changing the MediaMetricsService side. |
| // Java API 28 entries, do not change. |
| mMetricsItem->setCString(MM_PREFIX "streamtype", toString(track->streamType()).c_str()); |
| mMetricsItem->setCString(MM_PREFIX "type", |
| toString(track->mAttributes.content_type).c_str()); |
| mMetricsItem->setCString(MM_PREFIX "usage", toString(track->mAttributes.usage).c_str()); |
| |
| // Non-API entries, these can change due to a Java string mistake. |
| mMetricsItem->setInt32(MM_PREFIX "sampleRate", (int32_t)track->mSampleRate); |
| mMetricsItem->setInt64(MM_PREFIX "channelMask", (int64_t)track->mChannelMask); |
| // Non-API entries, these can change. |
| mMetricsItem->setInt32(MM_PREFIX "portId", (int32_t)track->mPortId); |
| mMetricsItem->setCString(MM_PREFIX "encoding", toString(track->mFormat).c_str()); |
| mMetricsItem->setInt32(MM_PREFIX "frameCount", (int32_t)track->mFrameCount); |
| mMetricsItem->setCString(MM_PREFIX "attributes", toString(track->mAttributes).c_str()); |
| mMetricsItem->setCString(MM_PREFIX "logSessionId", track->mLogSessionId.c_str()); |
| mMetricsItem->setInt32(MM_PREFIX "underrunFrames", (int32_t)track->getUnderrunFrames()); |
| } |
| |
| // hand the user a snapshot of the metrics. |
| status_t AudioTrack::getMetrics(mediametrics::Item * &item) |
| { |
| mMediaMetrics.gather(this); |
| mediametrics::Item *tmp = mMediaMetrics.dup(); |
| if (tmp == nullptr) { |
| return BAD_VALUE; |
| } |
| item = tmp; |
| return NO_ERROR; |
| } |
| |
| AudioTrack::AudioTrack() : AudioTrack(AttributionSourceState()) |
| { |
| } |
| |
| AudioTrack::AudioTrack(const AttributionSourceState& attributionSource) |
| : mStatus(NO_INIT), |
| mState(STATE_STOPPED), |
| mPreviousPriority(ANDROID_PRIORITY_NORMAL), |
| mPreviousSchedulingGroup(SP_DEFAULT), |
| mPausedPosition(0), |
| mSelectedDeviceId(AUDIO_PORT_HANDLE_NONE), |
| mRoutedDeviceId(AUDIO_PORT_HANDLE_NONE), |
| mClientAttributionSource(attributionSource), |
| mAudioTrackCallback(new AudioTrackCallback()) |
| { |
| mAttributes.content_type = AUDIO_CONTENT_TYPE_UNKNOWN; |
| mAttributes.usage = AUDIO_USAGE_UNKNOWN; |
| mAttributes.flags = AUDIO_FLAG_NONE; |
| strcpy(mAttributes.tags, ""); |
| } |
| |
| AudioTrack::AudioTrack( |
| audio_stream_type_t streamType, |
| uint32_t sampleRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| size_t frameCount, |
| audio_output_flags_t flags, |
| const wp<IAudioTrackCallback> & callback, |
| int32_t notificationFrames, |
| audio_session_t sessionId, |
| transfer_type transferType, |
| const audio_offload_info_t *offloadInfo, |
| const AttributionSourceState& attributionSource, |
| const audio_attributes_t* pAttributes, |
| bool doNotReconnect, |
| float maxRequiredSpeed, |
| audio_port_handle_t selectedDeviceId) |
| : mStatus(NO_INIT), |
| mState(STATE_STOPPED), |
| mPreviousPriority(ANDROID_PRIORITY_NORMAL), |
| mPreviousSchedulingGroup(SP_DEFAULT), |
| mPausedPosition(0), |
| mAudioTrackCallback(new AudioTrackCallback()) |
| { |
| mAttributes = AUDIO_ATTRIBUTES_INITIALIZER; |
| |
| // make_unique does not aggregate init until c++20 |
| mSetParams = std::unique_ptr<SetParams>{ |
| new SetParams{streamType, sampleRate, format, channelMask, frameCount, flags, callback, |
| notificationFrames, 0 /*sharedBuffer*/, false /*threadCanCallJava*/, |
| sessionId, transferType, offloadInfo, attributionSource, pAttributes, |
| doNotReconnect, maxRequiredSpeed, selectedDeviceId}}; |
| } |
| |
| namespace { |
| class LegacyCallbackWrapper : public AudioTrack::IAudioTrackCallback { |
| const AudioTrack::legacy_callback_t mCallback; |
| void * const mData; |
| public: |
| LegacyCallbackWrapper(AudioTrack::legacy_callback_t callback, void* user) |
| : mCallback(callback), mData(user) {} |
| size_t onMoreData(const AudioTrack::Buffer & buffer) override { |
| AudioTrack::Buffer copy = buffer; |
| mCallback(AudioTrack::EVENT_MORE_DATA, mData, static_cast<void*>(©)); |
| return copy.size(); |
| } |
| void onUnderrun() override { |
| mCallback(AudioTrack::EVENT_UNDERRUN, mData, nullptr); |
| } |
| void onLoopEnd(int32_t loopsRemaining) override { |
| mCallback(AudioTrack::EVENT_LOOP_END, mData, &loopsRemaining); |
| } |
| void onMarker(uint32_t markerPosition) override { |
| mCallback(AudioTrack::EVENT_MARKER, mData, &markerPosition); |
| } |
| void onNewPos(uint32_t newPos) override { |
| mCallback(AudioTrack::EVENT_NEW_POS, mData, &newPos); |
| } |
| void onBufferEnd() override { |
| mCallback(AudioTrack::EVENT_BUFFER_END, mData, nullptr); |
| } |
| void onNewIAudioTrack() override { |
| mCallback(AudioTrack::EVENT_NEW_IAUDIOTRACK, mData, nullptr); |
| } |
| void onStreamEnd() override { |
| mCallback(AudioTrack::EVENT_STREAM_END, mData, nullptr); |
| } |
| size_t onCanWriteMoreData(const AudioTrack::Buffer & buffer) override { |
| AudioTrack::Buffer copy = buffer; |
| mCallback(AudioTrack::EVENT_CAN_WRITE_MORE_DATA, mData, static_cast<void*>(©)); |
| return copy.size(); |
| } |
| }; |
| } |
| AudioTrack::AudioTrack( |
| audio_stream_type_t streamType, |
| uint32_t sampleRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| const sp<IMemory>& sharedBuffer, |
| audio_output_flags_t flags, |
| const wp<IAudioTrackCallback>& callback, |
| int32_t notificationFrames, |
| audio_session_t sessionId, |
| transfer_type transferType, |
| const audio_offload_info_t *offloadInfo, |
| const AttributionSourceState& attributionSource, |
| const audio_attributes_t* pAttributes, |
| bool doNotReconnect, |
| float maxRequiredSpeed) |
| : mStatus(NO_INIT), |
| mState(STATE_STOPPED), |
| mPreviousPriority(ANDROID_PRIORITY_NORMAL), |
| mPreviousSchedulingGroup(SP_DEFAULT), |
| mPausedPosition(0), |
| mSelectedDeviceId(AUDIO_PORT_HANDLE_NONE), |
| mAudioTrackCallback(new AudioTrackCallback()) |
| { |
| mAttributes = AUDIO_ATTRIBUTES_INITIALIZER; |
| |
| mSetParams = std::unique_ptr<SetParams>{ |
| new SetParams{streamType, sampleRate, format, channelMask, 0 /*frameCount*/, flags, |
| callback, notificationFrames, sharedBuffer, false /*threadCanCallJava*/, |
| sessionId, transferType, offloadInfo, attributionSource, pAttributes, |
| doNotReconnect, maxRequiredSpeed, AUDIO_PORT_HANDLE_NONE}}; |
| } |
| |
| void AudioTrack::onFirstRef() { |
| if (mSetParams) { |
| set(*mSetParams); |
| mSetParams.reset(); |
| } |
| } |
| |
| AudioTrack::~AudioTrack() |
| { |
| // pull together the numbers, before we clean up our structures |
| mMediaMetrics.gather(this); |
| |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_DTOR) |
| .set(AMEDIAMETRICS_PROP_CALLERNAME, |
| mCallerName.empty() |
| ? AMEDIAMETRICS_PROP_CALLERNAME_VALUE_UNKNOWN |
| : mCallerName.c_str()) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)mStatus) |
| .record(); |
| |
| stopAndJoinCallbacks(); // checks mStatus |
| |
| if (mStatus == NO_ERROR) { |
| IInterface::asBinder(mAudioTrack)->unlinkToDeath(mDeathNotifier, this); |
| mAudioTrack.clear(); |
| mCblkMemory.clear(); |
| mSharedBuffer.clear(); |
| IPCThreadState::self()->flushCommands(); |
| pid_t clientPid = VALUE_OR_FATAL(aidl2legacy_int32_t_pid_t(mClientAttributionSource.pid)); |
| ALOGV("%s(%d), releasing session id %d from %d on behalf of %d", |
| __func__, mPortId, |
| mSessionId, IPCThreadState::self()->getCallingPid(), clientPid); |
| AudioSystem::releaseAudioSessionId(mSessionId, clientPid); |
| } |
| } |
| |
| void AudioTrack::stopAndJoinCallbacks() { |
| // Prevent nullptr crash if it did not open properly. |
| if (mStatus != NO_ERROR) return; |
| |
| // Make sure that callback function exits in the case where |
| // it is looping on buffer full condition in obtainBuffer(). |
| // Otherwise the callback thread will never exit. |
| stop(); |
| if (mAudioTrackThread != 0) { // not thread safe |
| mAudioTrackThread->requestExit(); // see comment in AudioTrack.h |
| mProxy->interrupt(); |
| mAudioTrackThread->requestExitAndWait(); |
| mAudioTrackThread.clear(); |
| } |
| |
| AutoMutex lock(mLock); |
| if (mDeviceCallback != 0 && mOutput != AUDIO_IO_HANDLE_NONE) { |
| // This may not stop all of these device callbacks! |
| // TODO: Add some sort of protection. |
| AudioSystem::removeAudioDeviceCallback(this, mOutput, mPortId); |
| mDeviceCallback.clear(); |
| } |
| } |
| status_t AudioTrack::set( |
| audio_stream_type_t streamType, |
| uint32_t sampleRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| size_t frameCount, |
| audio_output_flags_t flags, |
| const wp<IAudioTrackCallback>& callback, |
| int32_t notificationFrames, |
| const sp<IMemory>& sharedBuffer, |
| bool threadCanCallJava, |
| audio_session_t sessionId, |
| transfer_type transferType, |
| const audio_offload_info_t *offloadInfo, |
| const AttributionSourceState& attributionSource, |
| const audio_attributes_t* pAttributes, |
| bool doNotReconnect, |
| float maxRequiredSpeed, |
| audio_port_handle_t selectedDeviceId) |
| { |
| LOG_ALWAYS_FATAL_IF(mInitialized, "%s: should not be called twice", __func__); |
| mInitialized = true; |
| status_t status; |
| uint32_t channelCount; |
| pid_t callingPid; |
| pid_t myPid; |
| uid_t uid = VALUE_OR_FATAL(aidl2legacy_int32_t_uid_t(attributionSource.uid)); |
| pid_t pid = VALUE_OR_FATAL(aidl2legacy_int32_t_pid_t(attributionSource.pid)); |
| std::string errorMessage; |
| // Note mPortId is not valid until the track is created, so omit mPortId in ALOG for set. |
| ALOGV("%s(): streamType %d, sampleRate %u, format %#x, channelMask %#x, frameCount %zu, " |
| "flags %#x, notificationFrames %d, sessionId %d, transferType %d, uid %d, pid %d", |
| __func__, |
| streamType, sampleRate, format, channelMask, frameCount, flags, notificationFrames, |
| sessionId, transferType, attributionSource.uid, attributionSource.pid); |
| |
| mThreadCanCallJava = threadCanCallJava; |
| |
| // These variables are pulled in an error report, so we initialize them early. |
| mSelectedDeviceId = selectedDeviceId; |
| mSessionId = sessionId; |
| mChannelMask = channelMask; |
| mReqFrameCount = mFrameCount = frameCount; |
| mSampleRate = sampleRate; |
| mOriginalSampleRate = sampleRate; |
| mAttributes = pAttributes != nullptr ? *pAttributes : AUDIO_ATTRIBUTES_INITIALIZER; |
| mPlaybackRate = AUDIO_PLAYBACK_RATE_DEFAULT; |
| |
| // update format and flags before storing them in mFormat, mOrigFlags and mFlags |
| if (pAttributes != NULL) { |
| // stream type shouldn't be looked at, this track has audio attributes |
| ALOGV("%s(): Building AudioTrack with attributes:" |
| " usage=%d content=%d flags=0x%x tags=[%s]", |
| __func__, |
| mAttributes.usage, mAttributes.content_type, mAttributes.flags, mAttributes.tags); |
| audio_flags_to_audio_output_flags(mAttributes.flags, &flags); |
| } |
| |
| // these below should probably come from the audioFlinger too... |
| if (format == AUDIO_FORMAT_DEFAULT) { |
| format = AUDIO_FORMAT_PCM_16_BIT; |
| } else if (format == AUDIO_FORMAT_IEC61937) { // HDMI pass-through? |
| flags = static_cast<audio_output_flags_t>(flags | AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO); |
| } |
| |
| // force direct flag if format is not linear PCM |
| // or offload was requested |
| if ((flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) |
| || !audio_is_linear_pcm(format)) { |
| ALOGV( (flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) |
| ? "%s(): Offload request, forcing to Direct Output" |
| : "%s(): Not linear PCM, forcing to Direct Output", |
| __func__); |
| flags = (audio_output_flags_t) |
| // FIXME why can't we allow direct AND fast? |
| ((flags | AUDIO_OUTPUT_FLAG_DIRECT) & ~AUDIO_OUTPUT_FLAG_FAST); |
| } |
| |
| // force direct flag if HW A/V sync requested |
| if ((flags & AUDIO_OUTPUT_FLAG_HW_AV_SYNC) != 0) { |
| flags = (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_DIRECT); |
| } |
| |
| mFormat = format; |
| mOrigFlags = mFlags = flags; |
| |
| switch (transferType) { |
| case TRANSFER_DEFAULT: |
| if (sharedBuffer != 0) { |
| transferType = TRANSFER_SHARED; |
| } else if (callback == nullptr|| threadCanCallJava) { |
| transferType = TRANSFER_SYNC; |
| } else { |
| transferType = TRANSFER_CALLBACK; |
| } |
| break; |
| case TRANSFER_CALLBACK: |
| case TRANSFER_SYNC_NOTIF_CALLBACK: |
| if (callback == nullptr || sharedBuffer != 0) { |
| errorMessage = StringPrintf( |
| "%s: Transfer type %s but callback == nullptr || sharedBuffer != 0", |
| convertTransferToText(transferType), __func__); |
| status = BAD_VALUE; |
| goto error; |
| } |
| break; |
| case TRANSFER_OBTAIN: |
| case TRANSFER_SYNC: |
| if (sharedBuffer != 0) { |
| errorMessage = StringPrintf( |
| "%s: Transfer type TRANSFER_OBTAIN but sharedBuffer != 0", __func__); |
| status = BAD_VALUE; |
| goto error; |
| } |
| break; |
| case TRANSFER_SHARED: |
| if (sharedBuffer == 0) { |
| errorMessage = StringPrintf( |
| "%s: Transfer type TRANSFER_SHARED but sharedBuffer == 0", __func__); |
| status = BAD_VALUE; |
| goto error; |
| } |
| break; |
| default: |
| errorMessage = StringPrintf("%s: Invalid transfer type %d", __func__, transferType); |
| status = BAD_VALUE; |
| goto error; |
| } |
| mSharedBuffer = sharedBuffer; |
| mTransfer = transferType; |
| mDoNotReconnect = doNotReconnect; |
| |
| ALOGV_IF(sharedBuffer != 0, "%s(): sharedBuffer: %p, size: %zu", |
| __func__, sharedBuffer->unsecurePointer(), sharedBuffer->size()); |
| |
| // invariant that mAudioTrack != 0 is true only after set() returns successfully |
| if (mAudioTrack != 0) { |
| errorMessage = StringPrintf("%s: Track already in use", __func__); |
| status = INVALID_OPERATION; |
| goto error; |
| } |
| |
| // handle default values first. |
| if (streamType == AUDIO_STREAM_DEFAULT) { |
| streamType = AUDIO_STREAM_MUSIC; |
| } |
| if (pAttributes == NULL) { |
| if (uint32_t(streamType) >= AUDIO_STREAM_PUBLIC_CNT) { |
| errorMessage = StringPrintf("%s: Invalid stream type %d", __func__, streamType); |
| status = BAD_VALUE; |
| goto error; |
| } |
| mOriginalStreamType = streamType; |
| } else { |
| mOriginalStreamType = AUDIO_STREAM_DEFAULT; |
| } |
| |
| // validate parameters |
| if (!audio_is_valid_format(format)) { |
| errorMessage = StringPrintf("%s: Invalid format %#x", __func__, format); |
| status = BAD_VALUE; |
| goto error; |
| } |
| |
| if (!audio_is_output_channel(channelMask)) { |
| errorMessage = StringPrintf("%s: Invalid channel mask %#x", __func__, channelMask); |
| status = BAD_VALUE; |
| goto error; |
| } |
| channelCount = audio_channel_count_from_out_mask(channelMask); |
| mChannelCount = channelCount; |
| |
| if (!(mFlags & AUDIO_OUTPUT_FLAG_DIRECT)) { |
| // createTrack will return an error if PCM format is not supported by server, |
| // so no need to check for specific PCM formats here |
| ALOGW_IF(!audio_has_proportional_frames(format), "%s(): no direct flag for format 0x%x", |
| __func__, format); |
| } |
| mFrameSize = audio_bytes_per_frame(channelCount, format); |
| |
| // sampling rate must be specified for direct outputs |
| if (sampleRate == 0 && (mFlags & AUDIO_OUTPUT_FLAG_DIRECT) != 0) { |
| errorMessage = StringPrintf( |
| "%s: sample rate must be specified for direct outputs", __func__); |
| status = BAD_VALUE; |
| goto error; |
| } |
| // 1.0 <= mMaxRequiredSpeed <= AUDIO_TIMESTRETCH_SPEED_MAX |
| mMaxRequiredSpeed = min(max(maxRequiredSpeed, 1.0f), AUDIO_TIMESTRETCH_SPEED_MAX); |
| |
| // Make copy of input parameter offloadInfo so that in the future: |
| // (a) createTrack_l doesn't need it as an input parameter |
| // (b) we can support re-creation of offloaded tracks |
| if (offloadInfo != NULL) { |
| mOffloadInfoCopy = *offloadInfo; |
| } else { |
| memset(&mOffloadInfoCopy, 0, sizeof(audio_offload_info_t)); |
| mOffloadInfoCopy = AUDIO_INFO_INITIALIZER; |
| mOffloadInfoCopy.format = format; |
| mOffloadInfoCopy.sample_rate = sampleRate; |
| mOffloadInfoCopy.channel_mask = channelMask; |
| mOffloadInfoCopy.stream_type = streamType; |
| } |
| |
| mVolume[AUDIO_INTERLEAVE_LEFT] = 1.0f; |
| mVolume[AUDIO_INTERLEAVE_RIGHT] = 1.0f; |
| mSendLevel = 0.0f; |
| // mFrameCount is initialized in createTrack_l |
| if (notificationFrames >= 0) { |
| mNotificationFramesReq = notificationFrames; |
| mNotificationsPerBufferReq = 0; |
| } else { |
| if (!(mFlags & AUDIO_OUTPUT_FLAG_FAST)) { |
| errorMessage = StringPrintf( |
| "%s: notificationFrames=%d not permitted for non-fast track", |
| __func__, notificationFrames); |
| status = BAD_VALUE; |
| goto error; |
| } |
| if (frameCount > 0) { |
| ALOGE("%s(): notificationFrames=%d not permitted with non-zero frameCount=%zu", |
| __func__, notificationFrames, frameCount); |
| status = BAD_VALUE; |
| goto error; |
| } |
| mNotificationFramesReq = 0; |
| const uint32_t minNotificationsPerBuffer = 1; |
| const uint32_t maxNotificationsPerBuffer = 8; |
| mNotificationsPerBufferReq = min(maxNotificationsPerBuffer, |
| max((uint32_t) -notificationFrames, minNotificationsPerBuffer)); |
| ALOGW_IF(mNotificationsPerBufferReq != (uint32_t) -notificationFrames, |
| "%s(): notificationFrames=%d clamped to the range -%u to -%u", |
| __func__, |
| notificationFrames, minNotificationsPerBuffer, maxNotificationsPerBuffer); |
| } |
| mNotificationFramesAct = 0; |
| // TODO b/182392553: refactor or remove |
| mClientAttributionSource = AttributionSourceState(attributionSource); |
| callingPid = IPCThreadState::self()->getCallingPid(); |
| myPid = getpid(); |
| if (uid == -1 || (callingPid != myPid)) { |
| mClientAttributionSource.uid = VALUE_OR_FATAL(legacy2aidl_uid_t_int32_t( |
| IPCThreadState::self()->getCallingUid())); |
| } |
| if (pid == (pid_t)-1 || (callingPid != myPid)) { |
| mClientAttributionSource.pid = VALUE_OR_FATAL(legacy2aidl_uid_t_int32_t(callingPid)); |
| } |
| mAuxEffectId = 0; |
| mCallback = callback; |
| |
| if (callback != nullptr) { |
| mAudioTrackThread = sp<AudioTrackThread>::make(*this); |
| mAudioTrackThread->run("AudioTrack", ANDROID_PRIORITY_AUDIO, 0 /*stack*/); |
| // thread begins in paused state, and will not reference us until start() |
| } |
| |
| // create the IAudioTrack |
| { |
| AutoMutex lock(mLock); |
| status = createTrack_l(); |
| } |
| if (status != NO_ERROR) { |
| if (mAudioTrackThread != 0) { |
| mAudioTrackThread->requestExit(); // see comment in AudioTrack.h |
| mAudioTrackThread->requestExitAndWait(); |
| mAudioTrackThread.clear(); |
| } |
| // We do not goto error to prevent double-logging errors. |
| goto exit; |
| } |
| |
| mLoopCount = 0; |
| mLoopStart = 0; |
| mLoopEnd = 0; |
| mLoopCountNotified = 0; |
| mMarkerPosition = 0; |
| mMarkerReached = false; |
| mNewPosition = 0; |
| mUpdatePeriod = 0; |
| mPosition = 0; |
| mReleased = 0; |
| mStartNs = 0; |
| mStartFromZeroUs = 0; |
| AudioSystem::acquireAudioSessionId(mSessionId, pid, uid); |
| mSequence = 1; |
| mObservedSequence = mSequence; |
| mInUnderrun = false; |
| mPreviousTimestampValid = false; |
| mTimestampStartupGlitchReported = false; |
| mTimestampRetrogradePositionReported = false; |
| mTimestampRetrogradeTimeReported = false; |
| mTimestampStallReported = false; |
| mTimestampStaleTimeReported = false; |
| mPreviousLocation = ExtendedTimestamp::LOCATION_INVALID; |
| mStartTs.mPosition = 0; |
| mUnderrunCountOffset = 0; |
| mFramesWritten = 0; |
| mFramesWrittenServerOffset = 0; |
| mFramesWrittenAtRestore = -1; // -1 is a unique initializer. |
| mVolumeHandler = new media::VolumeHandler(); |
| |
| error: |
| if (status != NO_ERROR) { |
| ALOGE_IF(!errorMessage.empty(), "%s", errorMessage.c_str()); |
| reportError(status, AMEDIAMETRICS_PROP_EVENT_VALUE_CREATE, errorMessage.c_str()); |
| } |
| // fall through |
| exit: |
| mStatus = status; |
| return status; |
| } |
| |
| |
| status_t AudioTrack::set( |
| audio_stream_type_t streamType, |
| uint32_t sampleRate, |
| audio_format_t format, |
| uint32_t channelMask, |
| size_t frameCount, |
| audio_output_flags_t flags, |
| legacy_callback_t callback, |
| void* user, |
| int32_t notificationFrames, |
| const sp<IMemory>& sharedBuffer, |
| bool threadCanCallJava, |
| audio_session_t sessionId, |
| transfer_type transferType, |
| const audio_offload_info_t *offloadInfo, |
| uid_t uid, |
| pid_t pid, |
| const audio_attributes_t* pAttributes, |
| bool doNotReconnect, |
| float maxRequiredSpeed, |
| audio_port_handle_t selectedDeviceId) |
| { |
| AttributionSourceState attributionSource; |
| attributionSource.uid = VALUE_OR_FATAL(legacy2aidl_uid_t_int32_t(uid)); |
| attributionSource.pid = VALUE_OR_FATAL(legacy2aidl_pid_t_int32_t(pid)); |
| attributionSource.token = sp<BBinder>::make(); |
| if (callback) { |
| mLegacyCallbackWrapper = sp<LegacyCallbackWrapper>::make(callback, user); |
| } else if (user) { |
| LOG_ALWAYS_FATAL("Callback data provided without callback pointer!"); |
| } |
| return set(streamType, sampleRate, format, static_cast<audio_channel_mask_t>(channelMask), |
| frameCount, flags, mLegacyCallbackWrapper, notificationFrames, sharedBuffer, |
| threadCanCallJava, sessionId, transferType, offloadInfo, attributionSource, |
| pAttributes, doNotReconnect, maxRequiredSpeed, selectedDeviceId); |
| } |
| |
| // ------------------------------------------------------------------------- |
| |
| status_t AudioTrack::start() |
| { |
| AutoMutex lock(mLock); |
| |
| if (mState == STATE_ACTIVE) { |
| return INVALID_OPERATION; |
| } |
| |
| ALOGV("%s(%d): prior state:%s", __func__, mPortId, stateToString(mState)); |
| |
| // Defer logging here due to OpenSL ES repeated start calls. |
| // TODO(b/154868033) after fix, restore this logging back to the beginning of start(). |
| const int64_t beginNs = systemTime(); |
| status_t status = NO_ERROR; // logged: make sure to set this before returning. |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_CALLERNAME, |
| mCallerName.empty() |
| ? AMEDIAMETRICS_PROP_CALLERNAME_VALUE_UNKNOWN |
| : mCallerName.c_str()) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_START) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(systemTime() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)status) |
| .record(); }); |
| |
| |
| mInUnderrun = true; |
| |
| State previousState = mState; |
| if (previousState == STATE_PAUSED_STOPPING) { |
| mState = STATE_STOPPING; |
| } else { |
| mState = STATE_ACTIVE; |
| } |
| (void) updateAndGetPosition_l(); |
| |
| // save start timestamp |
| if (isAfTrackOffloadedOrDirect_l()) { |
| if (getTimestamp_l(mStartTs) != OK) { |
| mStartTs.mPosition = 0; |
| } |
| } else { |
| if (getTimestamp_l(&mStartEts) != OK) { |
| mStartEts.clear(); |
| } |
| } |
| mStartNs = systemTime(); // save this for timestamp adjustment after starting. |
| if (previousState == STATE_STOPPED || previousState == STATE_FLUSHED) { |
| // reset current position as seen by client to 0 |
| mPosition = 0; |
| mPreviousTimestampValid = false; |
| mTimestampStartupGlitchReported = false; |
| mTimestampRetrogradePositionReported = false; |
| mTimestampRetrogradeTimeReported = false; |
| mTimestampStallReported = false; |
| mTimestampStaleTimeReported = false; |
| mPreviousLocation = ExtendedTimestamp::LOCATION_INVALID; |
| |
| if (!isAfTrackOffloadedOrDirect_l() |
| && mStartEts.mTimeNs[ExtendedTimestamp::LOCATION_SERVER] > 0) { |
| // Server side has consumed something, but is it finished consuming? |
| // It is possible since flush and stop are asynchronous that the server |
| // is still active at this point. |
| ALOGV("%s(%d): server read:%lld cumulative flushed:%lld client written:%lld", |
| __func__, mPortId, |
| (long long)(mFramesWrittenServerOffset |
| + mStartEts.mPosition[ExtendedTimestamp::LOCATION_SERVER]), |
| (long long)mStartEts.mFlushed, |
| (long long)mFramesWritten); |
| // mStartEts is already adjusted by mFramesWrittenServerOffset, so we delta adjust. |
| mFramesWrittenServerOffset -= mStartEts.mPosition[ExtendedTimestamp::LOCATION_SERVER]; |
| } |
| mFramesWritten = 0; |
| mProxy->clearTimestamp(); // need new server push for valid timestamp |
| mMarkerReached = false; |
| |
| // For offloaded tracks, we don't know if the hardware counters are really zero here, |
| // since the flush is asynchronous and stop may not fully drain. |
| // We save the time when the track is started to later verify whether |
| // the counters are realistic (i.e. start from zero after this time). |
| mStartFromZeroUs = mStartNs / 1000; |
| |
| // force refresh of remaining frames by processAudioBuffer() as last |
| // write before stop could be partial. |
| mRefreshRemaining = true; |
| |
| // for static track, clear the old flags when starting from stopped state |
| if (mSharedBuffer != 0) { |
| android_atomic_and( |
| ~(CBLK_LOOP_CYCLE | CBLK_LOOP_FINAL | CBLK_BUFFER_END), |
| &mCblk->mFlags); |
| } |
| } |
| mNewPosition = mPosition + mUpdatePeriod; |
| int32_t flags = android_atomic_and(~(CBLK_STREAM_END_DONE | CBLK_DISABLED), &mCblk->mFlags); |
| |
| if (!(flags & CBLK_INVALID)) { |
| mAudioTrack->start(&status); |
| if (status == DEAD_OBJECT) { |
| flags |= CBLK_INVALID; |
| } |
| } |
| if (flags & CBLK_INVALID) { |
| status = restoreTrack_l("start"); |
| } |
| |
| // resume or pause the callback thread as needed. |
| sp<AudioTrackThread> t = mAudioTrackThread; |
| if (status == NO_ERROR) { |
| if (t != 0) { |
| if (previousState == STATE_STOPPING) { |
| mProxy->interrupt(); |
| } else { |
| t->resume(); |
| } |
| } else { |
| mPreviousPriority = getpriority(PRIO_PROCESS, 0); |
| get_sched_policy(0, &mPreviousSchedulingGroup); |
| androidSetThreadPriority(0, ANDROID_PRIORITY_AUDIO); |
| } |
| |
| // Start our local VolumeHandler for restoration purposes. |
| mVolumeHandler->setStarted(); |
| } else { |
| ALOGE("%s(%d): status %d", __func__, mPortId, status); |
| mState = previousState; |
| if (t != 0) { |
| if (previousState != STATE_STOPPING) { |
| t->pause(); |
| } |
| } else { |
| setpriority(PRIO_PROCESS, 0, mPreviousPriority); |
| set_sched_policy(0, mPreviousSchedulingGroup); |
| } |
| } |
| |
| return status; |
| } |
| |
| void AudioTrack::stop() |
| { |
| const int64_t beginNs = systemTime(); |
| |
| AutoMutex lock(mLock); |
| mediametrics::Defer defer([&]() { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_STOP) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(systemTime() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .set(AMEDIAMETRICS_PROP_BUFFERSIZEFRAMES, (int32_t)mProxy->getBufferSizeInFrames()) |
| .set(AMEDIAMETRICS_PROP_UNDERRUN, (int32_t) getUnderrunCount_l()) |
| .record(); |
| }); |
| |
| ALOGV("%s(%d): prior state:%s", __func__, mPortId, stateToString(mState)); |
| |
| if (mState != STATE_ACTIVE && mState != STATE_PAUSED) { |
| return; |
| } |
| |
| if (isOffloaded_l()) { |
| mState = STATE_STOPPING; |
| } else { |
| mState = STATE_STOPPED; |
| ALOGD_IF(mSharedBuffer == nullptr, |
| "%s(%d): called with %u frames delivered", __func__, mPortId, mReleased.value()); |
| mReleased = 0; |
| } |
| |
| mProxy->stop(); // notify server not to read beyond current client position until start(). |
| mProxy->interrupt(); |
| mAudioTrack->stop(); |
| |
| // Note: legacy handling - stop does not clear playback marker |
| // and periodic update counter, but flush does for streaming tracks. |
| |
| if (mSharedBuffer != 0) { |
| // clear buffer position and loop count. |
| mStaticProxy->setBufferPositionAndLoop(0 /* position */, |
| 0 /* loopStart */, 0 /* loopEnd */, 0 /* loopCount */); |
| } |
| |
| sp<AudioTrackThread> t = mAudioTrackThread; |
| if (t != 0) { |
| if (!isOffloaded_l()) { |
| t->pause(); |
| } else if (mTransfer == TRANSFER_SYNC_NOTIF_CALLBACK) { |
| // causes wake up of the playback thread, that will callback the client for |
| // EVENT_STREAM_END in processAudioBuffer() |
| t->wake(); |
| } |
| } else { |
| setpriority(PRIO_PROCESS, 0, mPreviousPriority); |
| set_sched_policy(0, mPreviousSchedulingGroup); |
| } |
| } |
| |
| bool AudioTrack::stopped() const |
| { |
| AutoMutex lock(mLock); |
| return mState != STATE_ACTIVE; |
| } |
| |
| void AudioTrack::flush() |
| { |
| const int64_t beginNs = systemTime(); |
| AutoMutex lock(mLock); |
| mediametrics::Defer defer([&]() { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_FLUSH) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(systemTime() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .record(); }); |
| |
| ALOGV("%s(%d): prior state:%s", __func__, mPortId, stateToString(mState)); |
| |
| if (mSharedBuffer != 0) { |
| return; |
| } |
| if (mState == STATE_ACTIVE) { |
| return; |
| } |
| flush_l(); |
| } |
| |
| void AudioTrack::flush_l() |
| { |
| ALOG_ASSERT(mState != STATE_ACTIVE); |
| |
| // clear playback marker and periodic update counter |
| mMarkerPosition = 0; |
| mMarkerReached = false; |
| mUpdatePeriod = 0; |
| mRefreshRemaining = true; |
| |
| mState = STATE_FLUSHED; |
| mReleased = 0; |
| if (isOffloaded_l()) { |
| mProxy->interrupt(); |
| } |
| mProxy->flush(); |
| mAudioTrack->flush(); |
| } |
| |
| bool AudioTrack::pauseAndWait(const std::chrono::milliseconds& timeout) |
| { |
| using namespace std::chrono_literals; |
| |
| // We use atomic access here for state variables - these are used as hints |
| // to ensure we have ramped down audio. |
| const int priorState = mProxy->getState(); |
| const uint32_t priorPosition = mProxy->getPosition().unsignedValue(); |
| |
| pause(); |
| |
| // Only if we were previously active, do we wait to ramp down the audio. |
| if (priorState != CBLK_STATE_ACTIVE) return true; |
| |
| AutoMutex lock(mLock); |
| // offload and direct tracks do not wait because pause volume ramp is handled by hardware. |
| if (isOffloadedOrDirect_l()) return true; |
| |
| // Wait for the track state to be anything besides pausing. |
| // This ensures that the volume has ramped down. |
| constexpr auto SLEEP_INTERVAL_MS = 10ms; |
| constexpr auto POSITION_TIMEOUT_MS = 40ms; // don't wait longer than this for position change. |
| auto begin = std::chrono::steady_clock::now(); |
| while (true) { |
| // Wait for state and position to change. |
| // After pause() the server state should be PAUSING, but that may immediately |
| // convert to PAUSED by prepareTracks before data is read into the mixer. |
| // Hence we check that the state is not PAUSING and that the server position |
| // has advanced to be a more reliable estimate that the volume ramp has completed. |
| const int state = mProxy->getState(); |
| const uint32_t position = mProxy->getPosition().unsignedValue(); |
| |
| mLock.unlock(); // only local variables accessed until lock. |
| auto elapsed = std::chrono::duration_cast<std::chrono::milliseconds>( |
| std::chrono::steady_clock::now() - begin); |
| if (state != CBLK_STATE_PAUSING && |
| (elapsed >= POSITION_TIMEOUT_MS || position != priorPosition)) { |
| ALOGV("%s: success state:%d, position:%u after %lld ms" |
| " (prior state:%d prior position:%u)", |
| __func__, state, position, elapsed.count(), priorState, priorPosition); |
| return true; |
| } |
| std::chrono::milliseconds remaining = timeout - elapsed; |
| if (remaining.count() <= 0) { |
| ALOGW("%s: timeout expired state:%d still pausing:%d after %lld ms", |
| __func__, state, CBLK_STATE_PAUSING, elapsed.count()); |
| return false; |
| } |
| // It is conceivable that the track is restored while sleeping; |
| // as this logic is advisory, we allow that. |
| std::this_thread::sleep_for(std::min(remaining, SLEEP_INTERVAL_MS)); |
| mLock.lock(); |
| } |
| } |
| |
| void AudioTrack::pause() |
| { |
| const int64_t beginNs = systemTime(); |
| AutoMutex lock(mLock); |
| mediametrics::Defer defer([&]() { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_PAUSE) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(systemTime() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .record(); }); |
| |
| ALOGV("%s(%d): prior state:%s", __func__, mPortId, stateToString(mState)); |
| |
| if (mState == STATE_ACTIVE) { |
| mState = STATE_PAUSED; |
| } else if (mState == STATE_STOPPING) { |
| mState = STATE_PAUSED_STOPPING; |
| } else { |
| return; |
| } |
| mProxy->interrupt(); |
| mAudioTrack->pause(); |
| |
| if (isOffloaded_l()) { |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| // An offload output can be re-used between two audio tracks having |
| // the same configuration. A timestamp query for a paused track |
| // while the other is running would return an incorrect time. |
| // To fix this, cache the playback position on a pause() and return |
| // this time when requested until the track is resumed. |
| |
| // OffloadThread sends HAL pause in its threadLoop. Time saved |
| // here can be slightly off. |
| |
| // TODO: check return code for getRenderPosition. |
| |
| uint32_t halFrames; |
| AudioSystem::getRenderPosition(mOutput, &halFrames, &mPausedPosition); |
| ALOGV("%s(%d): for offload, cache current position %u", |
| __func__, mPortId, mPausedPosition); |
| } |
| } |
| } |
| |
| status_t AudioTrack::setVolume(float left, float right) |
| { |
| // This duplicates a test by AudioTrack JNI, but that is not the only caller |
| if (isnanf(left) || left < GAIN_FLOAT_ZERO || left > GAIN_FLOAT_UNITY || |
| isnanf(right) || right < GAIN_FLOAT_ZERO || right > GAIN_FLOAT_UNITY) { |
| return BAD_VALUE; |
| } |
| |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETVOLUME) |
| .set(AMEDIAMETRICS_PROP_VOLUME_LEFT, (double)left) |
| .set(AMEDIAMETRICS_PROP_VOLUME_RIGHT, (double)right) |
| .record(); |
| |
| AutoMutex lock(mLock); |
| mVolume[AUDIO_INTERLEAVE_LEFT] = left; |
| mVolume[AUDIO_INTERLEAVE_RIGHT] = right; |
| |
| mProxy->setVolumeLR(gain_minifloat_pack(gain_from_float(left), gain_from_float(right))); |
| |
| if (isOffloaded_l()) { |
| mAudioTrack->signal(); |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::setVolume(float volume) |
| { |
| return setVolume(volume, volume); |
| } |
| |
| status_t AudioTrack::setAuxEffectSendLevel(float level) |
| { |
| // This duplicates a test by AudioTrack JNI, but that is not the only caller |
| if (isnanf(level) || level < GAIN_FLOAT_ZERO || level > GAIN_FLOAT_UNITY) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| mSendLevel = level; |
| mProxy->setSendLevel(level); |
| |
| return NO_ERROR; |
| } |
| |
| void AudioTrack::getAuxEffectSendLevel(float* level) const |
| { |
| if (level != NULL) { |
| *level = mSendLevel; |
| } |
| } |
| |
| status_t AudioTrack::setSampleRate(uint32_t rate) |
| { |
| AutoMutex lock(mLock); |
| ALOGV("%s(%d): prior state:%s rate:%u", __func__, mPortId, stateToString(mState), rate); |
| |
| if (rate == mSampleRate) { |
| return NO_ERROR; |
| } |
| if (isOffloadedOrDirect_l() || (mFlags & AUDIO_OUTPUT_FLAG_FAST) |
| || (mChannelMask & AUDIO_CHANNEL_HAPTIC_ALL)) { |
| return INVALID_OPERATION; |
| } |
| if (mOutput == AUDIO_IO_HANDLE_NONE) { |
| return NO_INIT; |
| } |
| // NOTE: it is theoretically possible, but highly unlikely, that a device change |
| // could mean a previously allowed sampling rate is no longer allowed. |
| uint32_t afSamplingRate; |
| if (AudioSystem::getSamplingRate(mOutput, &afSamplingRate) != NO_ERROR) { |
| return NO_INIT; |
| } |
| // pitch is emulated by adjusting speed and sampleRate |
| const uint32_t effectiveSampleRate = adjustSampleRate(rate, mPlaybackRate.mPitch); |
| if (rate == 0 || effectiveSampleRate > afSamplingRate * AUDIO_RESAMPLER_DOWN_RATIO_MAX) { |
| return BAD_VALUE; |
| } |
| // TODO: Should we also check if the buffer size is compatible? |
| |
| mSampleRate = rate; |
| mProxy->setSampleRate(effectiveSampleRate); |
| |
| return NO_ERROR; |
| } |
| |
| uint32_t AudioTrack::getSampleRate() const |
| { |
| AutoMutex lock(mLock); |
| |
| // sample rate can be updated during playback by the offloaded decoder so we need to |
| // query the HAL and update if needed. |
| // FIXME use Proxy return channel to update the rate from server and avoid polling here |
| if (isOffloadedOrDirect_l()) { |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| uint32_t sampleRate = 0; |
| status_t status = AudioSystem::getSamplingRate(mOutput, &sampleRate); |
| if (status == NO_ERROR) { |
| mSampleRate = sampleRate; |
| } |
| } |
| } |
| return mSampleRate; |
| } |
| |
| uint32_t AudioTrack::getOriginalSampleRate() const |
| { |
| return mOriginalSampleRate; |
| } |
| |
| uint32_t AudioTrack::getHalSampleRate() const |
| { |
| return mAfSampleRate; |
| } |
| |
| uint32_t AudioTrack::getHalChannelCount() const |
| { |
| return mAfChannelCount; |
| } |
| |
| audio_format_t AudioTrack::getHalFormat() const |
| { |
| return mAfFormat; |
| } |
| |
| status_t AudioTrack::setDualMonoMode(audio_dual_mono_mode_t mode) |
| { |
| AutoMutex lock(mLock); |
| return setDualMonoMode_l(mode); |
| } |
| |
| status_t AudioTrack::setDualMonoMode_l(audio_dual_mono_mode_t mode) |
| { |
| const status_t status = statusTFromBinderStatus( |
| mAudioTrack->setDualMonoMode(VALUE_OR_RETURN_STATUS( |
| legacy2aidl_audio_dual_mono_mode_t_AudioDualMonoMode(mode)))); |
| if (status == NO_ERROR) mDualMonoMode = mode; |
| return status; |
| } |
| |
| status_t AudioTrack::getDualMonoMode(audio_dual_mono_mode_t* mode) const |
| { |
| AutoMutex lock(mLock); |
| media::audio::common::AudioDualMonoMode mediaMode; |
| const status_t status = statusTFromBinderStatus(mAudioTrack->getDualMonoMode(&mediaMode)); |
| if (status == NO_ERROR) { |
| *mode = VALUE_OR_RETURN_STATUS( |
| aidl2legacy_AudioDualMonoMode_audio_dual_mono_mode_t(mediaMode)); |
| } |
| return status; |
| } |
| |
| status_t AudioTrack::setAudioDescriptionMixLevel(float leveldB) |
| { |
| AutoMutex lock(mLock); |
| return setAudioDescriptionMixLevel_l(leveldB); |
| } |
| |
| status_t AudioTrack::setAudioDescriptionMixLevel_l(float leveldB) |
| { |
| const status_t status = statusTFromBinderStatus( |
| mAudioTrack->setAudioDescriptionMixLevel(leveldB)); |
| if (status == NO_ERROR) mAudioDescriptionMixLeveldB = leveldB; |
| return status; |
| } |
| |
| status_t AudioTrack::getAudioDescriptionMixLevel(float* leveldB) const |
| { |
| AutoMutex lock(mLock); |
| return statusTFromBinderStatus(mAudioTrack->getAudioDescriptionMixLevel(leveldB)); |
| } |
| |
| status_t AudioTrack::setPlaybackRate(const AudioPlaybackRate &playbackRate) |
| { |
| AutoMutex lock(mLock); |
| if (isAudioPlaybackRateEqual(playbackRate, mPlaybackRate)) { |
| return NO_ERROR; |
| } |
| if (isOffloadedOrDirect_l()) { |
| const status_t status = statusTFromBinderStatus(mAudioTrack->setPlaybackRateParameters( |
| VALUE_OR_RETURN_STATUS( |
| legacy2aidl_audio_playback_rate_t_AudioPlaybackRate(playbackRate)))); |
| if (status == NO_ERROR) { |
| mPlaybackRate = playbackRate; |
| } else if (status == INVALID_OPERATION |
| && playbackRate.mSpeed == 1.0f && mPlaybackRate.mPitch == 1.0f) { |
| mPlaybackRate = playbackRate; |
| return NO_ERROR; |
| } |
| return status; |
| } |
| if (mFlags & AUDIO_OUTPUT_FLAG_FAST) { |
| return INVALID_OPERATION; |
| } |
| |
| ALOGV("%s(%d): mSampleRate:%u mSpeed:%f mPitch:%f", |
| __func__, mPortId, mSampleRate, playbackRate.mSpeed, playbackRate.mPitch); |
| // pitch is emulated by adjusting speed and sampleRate |
| const uint32_t effectiveRate = adjustSampleRate(mSampleRate, playbackRate.mPitch); |
| const float effectiveSpeed = adjustSpeed(playbackRate.mSpeed, playbackRate.mPitch); |
| const float effectivePitch = adjustPitch(playbackRate.mPitch); |
| AudioPlaybackRate playbackRateTemp = playbackRate; |
| playbackRateTemp.mSpeed = effectiveSpeed; |
| playbackRateTemp.mPitch = effectivePitch; |
| |
| ALOGV("%s(%d) (effective) mSampleRate:%u mSpeed:%f mPitch:%f", |
| __func__, mPortId, effectiveRate, effectiveSpeed, effectivePitch); |
| |
| if (!isAudioPlaybackRateValid(playbackRateTemp)) { |
| ALOGW("%s(%d) (%f, %f) failed (effective rate out of bounds)", |
| __func__, mPortId, playbackRate.mSpeed, playbackRate.mPitch); |
| return BAD_VALUE; |
| } |
| // Check if the buffer size is compatible. |
| if (!isSampleRateSpeedAllowed_l(effectiveRate, effectiveSpeed)) { |
| ALOGW("%s(%d) (%f, %f) failed (buffer size)", |
| __func__, mPortId, playbackRate.mSpeed, playbackRate.mPitch); |
| return BAD_VALUE; |
| } |
| |
| // Check resampler ratios are within bounds |
| if ((uint64_t)effectiveRate > (uint64_t)mSampleRate * |
| (uint64_t)AUDIO_RESAMPLER_DOWN_RATIO_MAX) { |
| ALOGW("%s(%d) (%f, %f) failed. Resample rate exceeds max accepted value", |
| __func__, mPortId, playbackRate.mSpeed, playbackRate.mPitch); |
| return BAD_VALUE; |
| } |
| |
| if ((uint64_t)effectiveRate * (uint64_t)AUDIO_RESAMPLER_UP_RATIO_MAX < (uint64_t)mSampleRate) { |
| ALOGW("%s(%d) (%f, %f) failed. Resample rate below min accepted value", |
| __func__, mPortId, playbackRate.mSpeed, playbackRate.mPitch); |
| return BAD_VALUE; |
| } |
| mPlaybackRate = playbackRate; |
| //set effective rates |
| mProxy->setPlaybackRate(playbackRateTemp); |
| mProxy->setSampleRate(effectiveRate); // FIXME: not quite "atomic" with setPlaybackRate |
| |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETPLAYBACKPARAM) |
| .set(AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)mSampleRate) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_SPEED, (double)mPlaybackRate.mSpeed) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_PITCH, (double)mPlaybackRate.mPitch) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)effectiveRate) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_PLAYBACK_SPEED, (double)playbackRateTemp.mSpeed) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_PLAYBACK_PITCH, (double)playbackRateTemp.mPitch) |
| .record(); |
| |
| return NO_ERROR; |
| } |
| |
| const AudioPlaybackRate& AudioTrack::getPlaybackRate() |
| { |
| AutoMutex lock(mLock); |
| if (isOffloadedOrDirect_l()) { |
| media::audio::common::AudioPlaybackRate playbackRateTemp; |
| const status_t status = statusTFromBinderStatus( |
| mAudioTrack->getPlaybackRateParameters(&playbackRateTemp)); |
| if (status == NO_ERROR) { // update local version if changed. |
| mPlaybackRate = |
| aidl2legacy_AudioPlaybackRate_audio_playback_rate_t(playbackRateTemp).value(); |
| } |
| } |
| return mPlaybackRate; |
| } |
| |
| ssize_t AudioTrack::getBufferSizeInFrames() |
| { |
| AutoMutex lock(mLock); |
| if (mOutput == AUDIO_IO_HANDLE_NONE || mProxy.get() == 0) { |
| return NO_INIT; |
| } |
| |
| return (ssize_t) mProxy->getBufferSizeInFrames(); |
| } |
| |
| status_t AudioTrack::getBufferDurationInUs(int64_t *duration) |
| { |
| if (duration == nullptr) { |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| if (mOutput == AUDIO_IO_HANDLE_NONE || mProxy.get() == 0) { |
| return NO_INIT; |
| } |
| ssize_t bufferSizeInFrames = (ssize_t) mProxy->getBufferSizeInFrames(); |
| if (bufferSizeInFrames < 0) { |
| return (status_t)bufferSizeInFrames; |
| } |
| *duration = (int64_t)((double)bufferSizeInFrames * 1000000 |
| / ((double)mSampleRate * mPlaybackRate.mSpeed)); |
| return NO_ERROR; |
| } |
| |
| ssize_t AudioTrack::setBufferSizeInFrames(size_t bufferSizeInFrames) |
| { |
| AutoMutex lock(mLock); |
| if (mOutput == AUDIO_IO_HANDLE_NONE || mProxy.get() == 0) { |
| return NO_INIT; |
| } |
| |
| ssize_t originalBufferSize = mProxy->getBufferSizeInFrames(); |
| ssize_t finalBufferSize = mProxy->setBufferSizeInFrames((uint32_t) bufferSizeInFrames); |
| if (originalBufferSize != finalBufferSize) { |
| android::mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETBUFFERSIZE) |
| .set(AMEDIAMETRICS_PROP_BUFFERSIZEFRAMES, (int32_t)mProxy->getBufferSizeInFrames()) |
| .set(AMEDIAMETRICS_PROP_UNDERRUN, (int32_t)getUnderrunCount_l()) |
| .record(); |
| } |
| return finalBufferSize; |
| } |
| |
| ssize_t AudioTrack::getStartThresholdInFrames() const |
| { |
| AutoMutex lock(mLock); |
| if (mOutput == AUDIO_IO_HANDLE_NONE || mProxy.get() == 0) { |
| return NO_INIT; |
| } |
| return (ssize_t) mProxy->getStartThresholdInFrames(); |
| } |
| |
| ssize_t AudioTrack::setStartThresholdInFrames(size_t startThresholdInFrames) |
| { |
| if (startThresholdInFrames > INT32_MAX || startThresholdInFrames == 0) { |
| // contractually we could simply return the current threshold in frames |
| // to indicate the request was ignored, but we return an error here. |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| // We do not permit calling setStartThresholdInFrames() between the AudioTrack |
| // default ctor AudioTrack() and set(...) but rather fail such an attempt. |
| // (To do so would require a cached mOrigStartThresholdInFrames and we may |
| // not have proper validation for the actual set value). |
| if (mOutput == AUDIO_IO_HANDLE_NONE || mProxy.get() == 0) { |
| return NO_INIT; |
| } |
| const uint32_t original = mProxy->getStartThresholdInFrames(); |
| const uint32_t final = mProxy->setStartThresholdInFrames(startThresholdInFrames); |
| if (original != final) { |
| android::mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETSTARTTHRESHOLD) |
| .set(AMEDIAMETRICS_PROP_STARTTHRESHOLDFRAMES, (int32_t)final) |
| .record(); |
| if (original > final) { |
| // restart track if it was disabled by audioflinger due to previous underrun |
| // and we reduced the number of frames for the threshold. |
| restartIfDisabled(); |
| } |
| } |
| return final; |
| } |
| |
| status_t AudioTrack::setLoop(uint32_t loopStart, uint32_t loopEnd, int loopCount) |
| { |
| if (mSharedBuffer == 0 || isOffloadedOrDirect()) { |
| return INVALID_OPERATION; |
| } |
| |
| if (loopCount == 0) { |
| ; |
| } else if (loopCount >= -1 && loopStart < loopEnd && loopEnd <= mFrameCount && |
| loopEnd - loopStart >= MIN_LOOP) { |
| ; |
| } else { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| // See setPosition() regarding setting parameters such as loop points or position while active |
| if (mState == STATE_ACTIVE) { |
| return INVALID_OPERATION; |
| } |
| setLoop_l(loopStart, loopEnd, loopCount); |
| return NO_ERROR; |
| } |
| |
| void AudioTrack::setLoop_l(uint32_t loopStart, uint32_t loopEnd, int loopCount) |
| { |
| // We do not update the periodic notification point. |
| // mNewPosition = updateAndGetPosition_l() + mUpdatePeriod; |
| mLoopCount = loopCount; |
| mLoopEnd = loopEnd; |
| mLoopStart = loopStart; |
| mLoopCountNotified = loopCount; |
| mStaticProxy->setLoop(loopStart, loopEnd, loopCount); |
| |
| // Waking the AudioTrackThread is not needed as this cannot be called when active. |
| } |
| |
| status_t AudioTrack::setMarkerPosition(uint32_t marker) |
| { |
| AutoMutex lock(mLock); |
| // The only purpose of setting marker position is to get a callback |
| if (!mCallback.promote() || isOffloadedOrDirect_l()) { |
| return INVALID_OPERATION; |
| } |
| |
| mMarkerPosition = marker; |
| mMarkerReached = false; |
| |
| sp<AudioTrackThread> t = mAudioTrackThread; |
| if (t != 0) { |
| t->wake(); |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::getMarkerPosition(uint32_t *marker) const |
| { |
| if (isOffloadedOrDirect()) { |
| return INVALID_OPERATION; |
| } |
| if (marker == NULL) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| mMarkerPosition.getValue(marker); |
| |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::setPositionUpdatePeriod(uint32_t updatePeriod) |
| { |
| AutoMutex lock(mLock); |
| // The only purpose of setting position update period is to get a callback |
| if (!mCallback.promote() || isOffloadedOrDirect_l()) { |
| return INVALID_OPERATION; |
| } |
| |
| mNewPosition = updateAndGetPosition_l() + updatePeriod; |
| mUpdatePeriod = updatePeriod; |
| |
| sp<AudioTrackThread> t = mAudioTrackThread; |
| if (t != 0) { |
| t->wake(); |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::getPositionUpdatePeriod(uint32_t *updatePeriod) const |
| { |
| if (isOffloadedOrDirect()) { |
| return INVALID_OPERATION; |
| } |
| if (updatePeriod == NULL) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| *updatePeriod = mUpdatePeriod; |
| |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::setPosition(uint32_t position) |
| { |
| if (mSharedBuffer == 0 || isOffloadedOrDirect()) { |
| return INVALID_OPERATION; |
| } |
| if (position > mFrameCount) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| // Currently we require that the player is inactive before setting parameters such as position |
| // or loop points. Otherwise, there could be a race condition: the application could read the |
| // current position, compute a new position or loop parameters, and then set that position or |
| // loop parameters but it would do the "wrong" thing since the position has continued to advance |
| // in the mean time. If we ever provide a sequencer in server, we could allow a way for the app |
| // to specify how it wants to handle such scenarios. |
| if (mState == STATE_ACTIVE) { |
| return INVALID_OPERATION; |
| } |
| // After setting the position, use full update period before notification. |
| mNewPosition = updateAndGetPosition_l() + mUpdatePeriod; |
| mStaticProxy->setBufferPosition(position); |
| |
| // Waking the AudioTrackThread is not needed as this cannot be called when active. |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::getPosition(uint32_t *position) |
| { |
| if (position == NULL) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| // IAudioTrack::stop() isn't synchronous; we don't know when presentation completes |
| if (mState == STATE_STOPPED || mState == STATE_FLUSHED) { |
| *position = 0; |
| return NO_ERROR; |
| } |
| // FIXME: offloaded and direct tracks call into the HAL for render positions |
| // for compressed/synced data; however, we use proxy position for pure linear pcm data |
| // as we do not know the capability of the HAL for pcm position support and standby. |
| // There may be some latency differences between the HAL position and the proxy position. |
| if (isOffloadedOrDirect_l() && !isPurePcmData_l()) { |
| if (isOffloaded_l() && ((mState == STATE_PAUSED) || (mState == STATE_PAUSED_STOPPING))) { |
| ALOGV("%s(%d): called in paused state, return cached position %u", |
| __func__, mPortId, mPausedPosition); |
| *position = mPausedPosition; |
| return NO_ERROR; |
| } |
| |
| uint32_t dspFrames = 0; |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| uint32_t halFrames; // actually unused |
| // FIXME: on getRenderPosition() error, we return OK with frame position 0. |
| if (AudioSystem::getRenderPosition(mOutput, &halFrames, &dspFrames) != NO_ERROR) { |
| *position = 0; |
| return NO_ERROR; |
| } |
| } |
| *position = dspFrames; |
| } else { |
| if (mCblk->mFlags & CBLK_INVALID) { |
| (void) restoreTrack_l("getPosition"); |
| // FIXME: for compatibility with the Java API we ignore the restoreTrack_l() |
| // error here (e.g. DEAD_OBJECT) and return OK with the last recorded server position. |
| } |
| *position = updateAndGetPosition_l().value(); |
| } |
| |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::getBufferPosition(uint32_t *position) |
| { |
| if (mSharedBuffer == 0) { |
| return INVALID_OPERATION; |
| } |
| if (position == NULL) { |
| return BAD_VALUE; |
| } |
| |
| AutoMutex lock(mLock); |
| *position = mStaticProxy->getBufferPosition(); |
| return NO_ERROR; |
| } |
| |
| status_t AudioTrack::reload() |
| { |
| if (mSharedBuffer == 0 || isOffloadedOrDirect()) { |
| return INVALID_OPERATION; |
| } |
| |
| AutoMutex lock(mLock); |
| // See setPosition() regarding setting parameters such as loop points or position while active |
| if (mState == STATE_ACTIVE) { |
| return INVALID_OPERATION; |
| } |
| mNewPosition = mUpdatePeriod; |
| (void) updateAndGetPosition_l(); |
| mPosition = 0; |
| mPreviousTimestampValid = false; |
| #if 0 |
| // The documentation is not clear on the behavior of reload() and the restoration |
| // of loop count. Historically we have not restored loop count, start, end, |
| // but it makes sense if one desires to repeat playing a particular sound. |
| if (mLoopCount != 0) { |
| mLoopCountNotified = mLoopCount; |
| mStaticProxy->setLoop(mLoopStart, mLoopEnd, mLoopCount); |
| } |
| #endif |
| mStaticProxy->setBufferPosition(0); |
| return NO_ERROR; |
| } |
| |
| audio_io_handle_t AudioTrack::getOutput() const |
| { |
| AutoMutex lock(mLock); |
| return mOutput; |
| } |
| |
| status_t AudioTrack::setOutputDevice(audio_port_handle_t deviceId) { |
| status_t result = NO_ERROR; |
| AutoMutex lock(mLock); |
| ALOGV("%s(%d): deviceId=%d mSelectedDeviceId=%d", |
| __func__, mPortId, deviceId, mSelectedDeviceId); |
| if (mSelectedDeviceId != deviceId) { |
| mSelectedDeviceId = deviceId; |
| if (mStatus == NO_ERROR) { |
| if (isOffloadedOrDirect_l()) { |
| if (mState == STATE_STOPPED || mState == STATE_FLUSHED) { |
| ALOGD("%s(%d): creating a new AudioTrack", __func__, mPortId); |
| result = restoreTrack_l("setOutputDevice", true /* forceRestore */); |
| } else { |
| ALOGW("%s(%d). Offloaded or Direct track is not STOPPED or FLUSHED. " |
| "State: %s.", |
| __func__, mPortId, stateToString(mState)); |
| result = INVALID_OPERATION; |
| } |
| } else { |
| // allow track invalidation when track is not playing to propagate |
| // the updated mSelectedDeviceId |
| if (isPlaying_l()) { |
| if (mSelectedDeviceId != mRoutedDeviceId) { |
| android_atomic_or(CBLK_INVALID, &mCblk->mFlags); |
| mProxy->interrupt(); |
| } |
| } else { |
| // if the track is idle, try to restore now and |
| // defer to next start if not possible |
| if (restoreTrack_l("setOutputDevice") != OK) { |
| android_atomic_or(CBLK_INVALID, &mCblk->mFlags); |
| } |
| } |
| } |
| } |
| } |
| return result; |
| } |
| |
| audio_port_handle_t AudioTrack::getOutputDevice() { |
| AutoMutex lock(mLock); |
| return mSelectedDeviceId; |
| } |
| |
| // must be called with mLock held |
| void AudioTrack::updateRoutedDeviceId_l() |
| { |
| // if the track is inactive, do not update actual device as the output stream maybe routed |
| // to a device not relevant to this client because of other active use cases. |
| if (mState != STATE_ACTIVE) { |
| return; |
| } |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| audio_port_handle_t deviceId = AudioSystem::getDeviceIdForIo(mOutput); |
| if (deviceId != AUDIO_PORT_HANDLE_NONE) { |
| mRoutedDeviceId = deviceId; |
| } |
| } |
| } |
| |
| audio_port_handle_t AudioTrack::getRoutedDeviceId() { |
| AutoMutex lock(mLock); |
| updateRoutedDeviceId_l(); |
| return mRoutedDeviceId; |
| } |
| |
| status_t AudioTrack::attachAuxEffect(int effectId) |
| { |
| AutoMutex lock(mLock); |
| status_t status; |
| mAudioTrack->attachAuxEffect(effectId, &status); |
| if (status == NO_ERROR) { |
| mAuxEffectId = effectId; |
| } |
| return status; |
| } |
| |
| audio_stream_type_t AudioTrack::streamType() const |
| { |
| return mStreamType; |
| } |
| |
| uint32_t AudioTrack::latency() |
| { |
| AutoMutex lock(mLock); |
| updateLatency_l(); |
| return mLatency; |
| } |
| |
| // ------------------------------------------------------------------------- |
| |
| // must be called with mLock held |
| void AudioTrack::updateLatency_l() |
| { |
| status_t status = AudioSystem::getLatency(mOutput, &mAfLatency); |
| if (status != NO_ERROR) { |
| ALOGW("%s(%d): getLatency(%d) failed status %d", __func__, mPortId, mOutput, status); |
| } else { |
| // FIXME don't believe this lie |
| mLatency = mAfLatency + (1000LL * mFrameCount) / mSampleRate; |
| } |
| } |
| |
| // TODO Move this macro to a common header file for enum to string conversion in audio framework. |
| #define MEDIA_CASE_ENUM(name) case name: return #name |
| const char * AudioTrack::convertTransferToText(transfer_type transferType) { |
| switch (transferType) { |
| MEDIA_CASE_ENUM(TRANSFER_DEFAULT); |
| MEDIA_CASE_ENUM(TRANSFER_CALLBACK); |
| MEDIA_CASE_ENUM(TRANSFER_OBTAIN); |
| MEDIA_CASE_ENUM(TRANSFER_SYNC); |
| MEDIA_CASE_ENUM(TRANSFER_SHARED); |
| MEDIA_CASE_ENUM(TRANSFER_SYNC_NOTIF_CALLBACK); |
| default: |
| return "UNRECOGNIZED"; |
| } |
| } |
| |
| status_t AudioTrack::createTrack_l() |
| { |
| status_t status; |
| bool callbackAdded = false; |
| std::string errorMessage; |
| |
| const sp<IAudioFlinger>& audioFlinger = AudioSystem::get_audio_flinger(); |
| if (audioFlinger == 0) { |
| errorMessage = StringPrintf("%s(%d): Could not get audioflinger", |
| __func__, mPortId); |
| status = DEAD_OBJECT; |
| goto exit; |
| } |
| |
| { |
| // mFlags (not mOrigFlags) is modified depending on whether fast request is accepted. |
| // After fast request is denied, we will request again if IAudioTrack is re-created. |
| // Client can only express a preference for FAST. Server will perform additional tests. |
| if (mFlags & AUDIO_OUTPUT_FLAG_FAST) { |
| // either of these use cases: |
| // use case 1: shared buffer |
| bool sharedBuffer = mSharedBuffer != 0; |
| bool transferAllowed = |
| // use case 2: callback transfer mode |
| (mTransfer == TRANSFER_CALLBACK) || |
| // use case 3: obtain/release mode |
| (mTransfer == TRANSFER_OBTAIN) || |
| // use case 4: synchronous write |
| ((mTransfer == TRANSFER_SYNC || mTransfer == TRANSFER_SYNC_NOTIF_CALLBACK) |
| && mThreadCanCallJava); |
| |
| bool fastAllowed = sharedBuffer || transferAllowed; |
| if (!fastAllowed) { |
| ALOGW("%s(%d): AUDIO_OUTPUT_FLAG_FAST denied by client," |
| " not shared buffer and transfer = %s", |
| __func__, mPortId, |
| convertTransferToText(mTransfer)); |
| mFlags = (audio_output_flags_t) (mFlags & ~AUDIO_OUTPUT_FLAG_FAST); |
| } |
| } |
| |
| IAudioFlinger::CreateTrackInput input; |
| if (mOriginalStreamType != AUDIO_STREAM_DEFAULT) { |
| // Legacy: This is based on original parameters even if the track is recreated. |
| input.attr = AudioSystem::streamTypeToAttributes(mOriginalStreamType); |
| } else { |
| input.attr = mAttributes; |
| } |
| input.config = AUDIO_CONFIG_INITIALIZER; |
| input.config.sample_rate = mSampleRate; |
| input.config.channel_mask = mChannelMask; |
| input.config.format = mFormat; |
| input.config.offload_info = mOffloadInfoCopy; |
| input.clientInfo.attributionSource = mClientAttributionSource; |
| input.clientInfo.clientTid = -1; |
| if (mFlags & AUDIO_OUTPUT_FLAG_FAST) { |
| // It is currently meaningless to request SCHED_FIFO for a Java thread. Even if the |
| // application-level code follows all non-blocking design rules, the language runtime |
| // doesn't also follow those rules, so the thread will not benefit overall. |
| if (mAudioTrackThread != 0 && !mThreadCanCallJava) { |
| input.clientInfo.clientTid = mAudioTrackThread->getTid(); |
| } |
| } |
| input.sharedBuffer = mSharedBuffer; |
| input.notificationsPerBuffer = mNotificationsPerBufferReq; |
| input.speed = 1.0; |
| if (audio_has_proportional_frames(mFormat) && mSharedBuffer == 0 && |
| (mFlags & AUDIO_OUTPUT_FLAG_FAST) == 0) { |
| input.speed = !isPurePcmData_l() || isOffloadedOrDirect_l() ? 1.0f : |
| max(mMaxRequiredSpeed, mPlaybackRate.mSpeed); |
| } |
| input.flags = mFlags; |
| input.frameCount = mReqFrameCount; |
| input.notificationFrameCount = mNotificationFramesReq; |
| input.selectedDeviceId = mSelectedDeviceId; |
| input.sessionId = mSessionId; |
| input.audioTrackCallback = mAudioTrackCallback; |
| |
| media::CreateTrackResponse response; |
| status = audioFlinger->createTrack(VALUE_OR_FATAL(input.toAidl()), response); |
| |
| IAudioFlinger::CreateTrackOutput output{}; |
| if (status == NO_ERROR) { |
| output = VALUE_OR_FATAL(IAudioFlinger::CreateTrackOutput::fromAidl(response)); |
| } |
| |
| if (status != NO_ERROR || output.outputId == AUDIO_IO_HANDLE_NONE) { |
| errorMessage = StringPrintf( |
| "%s(%d): AudioFlinger could not create track, status: %d output %d", |
| __func__, mPortId, status, output.outputId); |
| if (status == NO_ERROR) { |
| status = INVALID_OPERATION; // device not ready |
| } |
| goto exit; |
| } |
| ALOG_ASSERT(output.audioTrack != 0); |
| |
| mFrameCount = output.frameCount; |
| mNotificationFramesAct = (uint32_t)output.notificationFrameCount; |
| mRoutedDeviceId = output.selectedDeviceId; |
| mSessionId = output.sessionId; |
| mStreamType = output.streamType; |
| |
| mSampleRate = output.sampleRate; |
| if (mOriginalSampleRate == 0) { |
| mOriginalSampleRate = mSampleRate; |
| } |
| |
| mAfFrameCount = output.afFrameCount; |
| mAfSampleRate = output.afSampleRate; |
| mAfChannelCount = audio_channel_count_from_out_mask(output.afChannelMask); |
| mAfFormat = output.afFormat; |
| mAfLatency = output.afLatencyMs; |
| mAfTrackFlags = output.afTrackFlags; |
| |
| mLatency = mAfLatency + (1000LL * mFrameCount) / mSampleRate; |
| |
| // AudioFlinger now owns the reference to the I/O handle, |
| // so we are no longer responsible for releasing it. |
| |
| // FIXME compare to AudioRecord |
| std::optional<media::SharedFileRegion> sfr; |
| output.audioTrack->getCblk(&sfr); |
| sp<IMemory> iMem = VALUE_OR_FATAL(aidl2legacy_NullableSharedFileRegion_IMemory(sfr)); |
| if (iMem == 0) { |
| errorMessage = StringPrintf("%s(%d): Could not get control block", __func__, mPortId); |
| status = FAILED_TRANSACTION; |
| goto exit; |
| } |
| // TODO: Using unsecurePointer() has some associated security pitfalls |
| // (see declaration for details). |
| // Either document why it is safe in this case or address the |
| // issue (e.g. by copying). |
| void *iMemPointer = iMem->unsecurePointer(); |
| if (iMemPointer == NULL) { |
| errorMessage = StringPrintf( |
| "%s(%d): Could not get control block pointer", __func__, mPortId); |
| status = FAILED_TRANSACTION; |
| goto exit; |
| } |
| // invariant that mAudioTrack != 0 is true only after set() returns successfully |
| if (mAudioTrack != 0) { |
| IInterface::asBinder(mAudioTrack)->unlinkToDeath(mDeathNotifier, this); |
| mDeathNotifier.clear(); |
| } |
| mAudioTrack = output.audioTrack; |
| mCblkMemory = iMem; |
| IPCThreadState::self()->flushCommands(); |
| |
| audio_track_cblk_t* cblk = static_cast<audio_track_cblk_t*>(iMemPointer); |
| mCblk = cblk; |
| |
| mAwaitBoost = false; |
| if (mFlags & AUDIO_OUTPUT_FLAG_FAST) { |
| if (output.flags & AUDIO_OUTPUT_FLAG_FAST) { |
| ALOGI("%s(%d): AUDIO_OUTPUT_FLAG_FAST successful; frameCount %zu -> %zu", |
| __func__, mPortId, mReqFrameCount, mFrameCount); |
| if (!mThreadCanCallJava) { |
| mAwaitBoost = true; |
| } |
| } else { |
| ALOGV("%s(%d): AUDIO_OUTPUT_FLAG_FAST denied by server; frameCount %zu -> %zu", |
| __func__, mPortId, mReqFrameCount, mFrameCount); |
| } |
| } |
| mFlags = output.flags; |
| |
| //mOutput != output includes the case where mOutput == AUDIO_IO_HANDLE_NONE for first creation |
| if (mDeviceCallback != 0) { |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| AudioSystem::removeAudioDeviceCallback(this, mOutput, mPortId); |
| } |
| AudioSystem::addAudioDeviceCallback(this, output.outputId, output.portId); |
| callbackAdded = true; |
| } |
| |
| mPortId = output.portId; |
| // notify the upper layers about the new portId |
| triggerPortIdUpdate_l(); |
| |
| // We retain a copy of the I/O handle, but don't own the reference |
| mOutput = output.outputId; |
| mRefreshRemaining = true; |
| |
| // Starting address of buffers in shared memory. If there is a shared buffer, buffers |
| // is the value of pointer() for the shared buffer, otherwise buffers points |
| // immediately after the control block. This address is for the mapping within client |
| // address space. AudioFlinger::TrackBase::mBuffer is for the server address space. |
| void* buffers; |
| if (mSharedBuffer == 0) { |
| buffers = cblk + 1; |
| } else { |
| // TODO: Using unsecurePointer() has some associated security pitfalls |
| // (see declaration for details). |
| // Either document why it is safe in this case or address the |
| // issue (e.g. by copying). |
| buffers = mSharedBuffer->unsecurePointer(); |
| if (buffers == NULL) { |
| errorMessage = StringPrintf( |
| "%s(%d): Could not get buffer pointer", __func__, mPortId); |
| ALOGE("%s", errorMessage.c_str()); |
| status = FAILED_TRANSACTION; |
| goto exit; |
| } |
| } |
| |
| mAudioTrack->attachAuxEffect(mAuxEffectId, &status); |
| |
| // If IAudioTrack is re-created, don't let the requested frameCount |
| // decrease. This can confuse clients that cache frameCount(). |
| if (mFrameCount > mReqFrameCount) { |
| mReqFrameCount = mFrameCount; |
| } |
| |
| // reset server position to 0 as we have new cblk. |
| mServer = 0; |
| |
| // update proxy |
| if (mSharedBuffer == 0) { |
| mStaticProxy.clear(); |
| mProxy = new AudioTrackClientProxy(cblk, buffers, mFrameCount, mFrameSize); |
| } else { |
| mStaticProxy = new StaticAudioTrackClientProxy(cblk, buffers, mFrameCount, mFrameSize); |
| mProxy = mStaticProxy; |
| } |
| |
| mProxy->setVolumeLR(gain_minifloat_pack( |
| gain_from_float(mVolume[AUDIO_INTERLEAVE_LEFT]), |
| gain_from_float(mVolume[AUDIO_INTERLEAVE_RIGHT]))); |
| |
| mProxy->setSendLevel(mSendLevel); |
| const uint32_t effectiveSampleRate = adjustSampleRate(mSampleRate, mPlaybackRate.mPitch); |
| const float effectiveSpeed = adjustSpeed(mPlaybackRate.mSpeed, mPlaybackRate.mPitch); |
| const float effectivePitch = adjustPitch(mPlaybackRate.mPitch); |
| mProxy->setSampleRate(effectiveSampleRate); |
| |
| AudioPlaybackRate playbackRateTemp = mPlaybackRate; |
| playbackRateTemp.mSpeed = effectiveSpeed; |
| playbackRateTemp.mPitch = effectivePitch; |
| mProxy->setPlaybackRate(playbackRateTemp); |
| mProxy->setMinimum(mNotificationFramesAct); |
| |
| if (mDualMonoMode != AUDIO_DUAL_MONO_MODE_OFF) { |
| setDualMonoMode_l(mDualMonoMode); |
| } |
| if (mAudioDescriptionMixLeveldB != -std::numeric_limits<float>::infinity()) { |
| setAudioDescriptionMixLevel_l(mAudioDescriptionMixLeveldB); |
| } |
| |
| mDeathNotifier = new DeathNotifier(this); |
| IInterface::asBinder(mAudioTrack)->linkToDeath(mDeathNotifier, this); |
| |
| // This is the first log sent from the AudioTrack client. |
| // The creation of the audio track by AudioFlinger (in the code above) |
| // is the first log of the AudioTrack and must be present before |
| // any AudioTrack client logs will be accepted. |
| |
| mMetricsId = std::string(AMEDIAMETRICS_KEY_PREFIX_AUDIO_TRACK) + std::to_string(mPortId); |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_CREATE) |
| // the following are immutable |
| .set(AMEDIAMETRICS_PROP_FLAGS, toString(mFlags).c_str()) |
| .set(AMEDIAMETRICS_PROP_ORIGINALFLAGS, toString(mOrigFlags).c_str()) |
| .set(AMEDIAMETRICS_PROP_SESSIONID, (int32_t)mSessionId) |
| .set(AMEDIAMETRICS_PROP_LOGSESSIONID, mLogSessionId) |
| .set(AMEDIAMETRICS_PROP_PLAYERIID, mPlayerIId) |
| .set(AMEDIAMETRICS_PROP_TRACKID, mPortId) // dup from key |
| .set(AMEDIAMETRICS_PROP_CONTENTTYPE, toString(mAttributes.content_type).c_str()) |
| .set(AMEDIAMETRICS_PROP_USAGE, toString(mAttributes.usage).c_str()) |
| .set(AMEDIAMETRICS_PROP_THREADID, (int32_t)output.outputId) |
| .set(AMEDIAMETRICS_PROP_SELECTEDDEVICEID, (int32_t)mSelectedDeviceId) |
| .set(AMEDIAMETRICS_PROP_ROUTEDDEVICEID, (int32_t)mRoutedDeviceId) |
| .set(AMEDIAMETRICS_PROP_ENCODING, toString(mFormat).c_str()) |
| .set(AMEDIAMETRICS_PROP_CHANNELMASK, (int32_t)mChannelMask) |
| .set(AMEDIAMETRICS_PROP_FRAMECOUNT, (int32_t)mFrameCount) |
| // the following are NOT immutable |
| .set(AMEDIAMETRICS_PROP_VOLUME_LEFT, (double)mVolume[AUDIO_INTERLEAVE_LEFT]) |
| .set(AMEDIAMETRICS_PROP_VOLUME_RIGHT, (double)mVolume[AUDIO_INTERLEAVE_RIGHT]) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)NO_ERROR) |
| .set(AMEDIAMETRICS_PROP_AUXEFFECTID, (int32_t)mAuxEffectId) |
| .set(AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)mSampleRate) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_SPEED, (double)mPlaybackRate.mSpeed) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_PITCH, (double)mPlaybackRate.mPitch) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)effectiveSampleRate) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_PLAYBACK_SPEED, (double)effectiveSpeed) |
| .set(AMEDIAMETRICS_PROP_PREFIX_EFFECTIVE |
| AMEDIAMETRICS_PROP_PLAYBACK_PITCH, (double)effectivePitch) |
| .record(); |
| |
| // mSendLevel |
| // mReqFrameCount? |
| // mNotificationFramesAct, mNotificationFramesReq, mNotificationsPerBufferReq |
| // mLatency, mAfLatency, mAfFrameCount, mAfSampleRate |
| |
| } |
| |
| exit: |
| if (status != NO_ERROR) { |
| if (callbackAdded) { |
| // note: mOutput is always valid is callbackAdded is true |
| AudioSystem::removeAudioDeviceCallback(this, mOutput, mPortId); |
| } |
| ALOGE_IF(!errorMessage.empty(), "%s", errorMessage.c_str()); |
| reportError(status, AMEDIAMETRICS_PROP_EVENT_VALUE_CREATE, errorMessage.c_str()); |
| } |
| mStatus = status; |
| |
| // sp<IAudioTrack> track destructor will cause releaseOutput() to be called by AudioFlinger |
| return status; |
| } |
| |
| void AudioTrack::reportError(status_t status, const char *event, const char *message) const |
| { |
| if (status == NO_ERROR) return; |
| // We report error on the native side because some callers do not come |
| // from Java. |
| // Ensure these variables are initialized in set(). |
| mediametrics::LogItem(AMEDIAMETRICS_KEY_AUDIO_TRACK_ERROR) |
| .set(AMEDIAMETRICS_PROP_EVENT, event) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)status) |
| .set(AMEDIAMETRICS_PROP_STATUSMESSAGE, message) |
| .set(AMEDIAMETRICS_PROP_ORIGINALFLAGS, toString(mOrigFlags).c_str()) |
| .set(AMEDIAMETRICS_PROP_SESSIONID, (int32_t)mSessionId) |
| .set(AMEDIAMETRICS_PROP_CONTENTTYPE, toString(mAttributes.content_type).c_str()) |
| .set(AMEDIAMETRICS_PROP_USAGE, toString(mAttributes.usage).c_str()) |
| .set(AMEDIAMETRICS_PROP_SELECTEDDEVICEID, (int32_t)mSelectedDeviceId) |
| .set(AMEDIAMETRICS_PROP_ENCODING, toString(mFormat).c_str()) |
| .set(AMEDIAMETRICS_PROP_CHANNELMASK, (int32_t)mChannelMask) |
| // the following are NOT immutable |
| // frame count is initially the requested frame count, but may be adjusted |
| // by AudioFlinger after creation. |
| .set(AMEDIAMETRICS_PROP_FRAMECOUNT, (int32_t)mFrameCount) |
| .set(AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)mSampleRate) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_SPEED, (double)mPlaybackRate.mSpeed) |
| .set(AMEDIAMETRICS_PROP_PLAYBACK_PITCH, (double)mPlaybackRate.mPitch) |
| .record(); |
| } |
| |
| status_t AudioTrack::obtainBuffer(Buffer* audioBuffer, int32_t waitCount, size_t *nonContig) |
| { |
| if (audioBuffer == NULL) { |
| if (nonContig != NULL) { |
| *nonContig = 0; |
| } |
| return BAD_VALUE; |
| } |
| if (mTransfer != TRANSFER_OBTAIN) { |
| audioBuffer->frameCount = 0; |
| audioBuffer->mSize = 0; |
| audioBuffer->raw = NULL; |
| if (nonContig != NULL) { |
| *nonContig = 0; |
| } |
| return INVALID_OPERATION; |
| } |
| |
| const struct timespec *requested; |
| struct timespec timeout; |
| if (waitCount == -1) { |
| requested = &ClientProxy::kForever; |
| } else if (waitCount == 0) { |
| requested = &ClientProxy::kNonBlocking; |
| } else if (waitCount > 0) { |
| time_t ms = WAIT_PERIOD_MS * (time_t) waitCount; |
| timeout.tv_sec = ms / 1000; |
| timeout.tv_nsec = (ms % 1000) * 1000000; |
| requested = &timeout; |
| } else { |
| ALOGE("%s(%d): invalid waitCount %d", __func__, mPortId, waitCount); |
| requested = NULL; |
| } |
| return obtainBuffer(audioBuffer, requested, NULL /*elapsed*/, nonContig); |
| } |
| |
| status_t AudioTrack::obtainBuffer(Buffer* audioBuffer, const struct timespec *requested, |
| struct timespec *elapsed, size_t *nonContig) |
| { |
| // previous and new IAudioTrack sequence numbers are used to detect track re-creation |
| uint32_t oldSequence = 0; |
| |
| Proxy::Buffer buffer; |
| status_t status = NO_ERROR; |
| |
| static const int32_t kMaxTries = 5; |
| int32_t tryCounter = kMaxTries; |
| |
| do { |
| // obtainBuffer() is called with mutex unlocked, so keep extra references to these fields to |
| // keep them from going away if another thread re-creates the track during obtainBuffer() |
| sp<AudioTrackClientProxy> proxy; |
| |
| { // start of lock scope |
| AutoMutex lock(mLock); |
| |
| uint32_t newSequence = mSequence; |
| // did previous obtainBuffer() fail due to media server death or voluntary invalidation? |
| if (status == DEAD_OBJECT) { |
| // re-create track, unless someone else has already done so |
| if (newSequence == oldSequence) { |
| status = restoreTrack_l("obtainBuffer"); |
| if (status != NO_ERROR) { |
| buffer.mFrameCount = 0; |
| buffer.mRaw = NULL; |
| buffer.mNonContig = 0; |
| break; |
| } |
| } |
| } |
| oldSequence = newSequence; |
| |
| if (status == NOT_ENOUGH_DATA) { |
| restartIfDisabled(); |
| } |
| |
| // Keep the extra references |
| mProxyObtainBufferRef = mProxy; |
| proxy = mProxy; |
| mCblkMemoryObtainBufferRef = mCblkMemory; |
| |
| if (mState == STATE_STOPPING) { |
| status = -EINTR; |
| buffer.mFrameCount = 0; |
| buffer.mRaw = NULL; |
| buffer.mNonContig = 0; |
| break; |
| } |
| |
| // Non-blocking if track is stopped or paused |
| if (mState != STATE_ACTIVE) { |
| requested = &ClientProxy::kNonBlocking; |
| } |
| |
| } // end of lock scope |
| |
| buffer.mFrameCount = audioBuffer->frameCount; |
| // FIXME starts the requested timeout and elapsed over from scratch |
| status = proxy->obtainBuffer(&buffer, requested, elapsed); |
| } while (((status == DEAD_OBJECT) || (status == NOT_ENOUGH_DATA)) && (tryCounter-- > 0)); |
| |
| audioBuffer->frameCount = buffer.mFrameCount; |
| audioBuffer->mSize = buffer.mFrameCount * mFrameSize; |
| audioBuffer->raw = buffer.mRaw; |
| audioBuffer->sequence = oldSequence; |
| if (nonContig != NULL) { |
| *nonContig = buffer.mNonContig; |
| } |
| return status; |
| } |
| |
| void AudioTrack::releaseBuffer(const Buffer* audioBuffer) |
| { |
| // FIXME add error checking on mode, by adding an internal version |
| if (mTransfer == TRANSFER_SHARED) { |
| return; |
| } |
| |
| size_t stepCount = audioBuffer->mSize / mFrameSize; |
| if (stepCount == 0) { |
| return; |
| } |
| |
| Proxy::Buffer buffer; |
| buffer.mFrameCount = stepCount; |
| buffer.mRaw = audioBuffer->raw; |
| |
| sp<IMemory> tempMemory; |
| sp<AudioTrackClientProxy> tempProxy; |
| AutoMutex lock(mLock); |
| if (audioBuffer->sequence != mSequence) { |
| // This Buffer came from a different IAudioTrack instance, so ignore the releaseBuffer |
| ALOGD("%s is no-op due to IAudioTrack sequence mismatch %u != %u", |
| __func__, audioBuffer->sequence, mSequence); |
| return; |
| } |
| mReleased += stepCount; |
| mInUnderrun = false; |
| mProxyObtainBufferRef->releaseBuffer(&buffer); |
| // The extra reference of shared memory and proxy from `obtainBuffer` is not used after |
| // calling `releaseBuffer`. Move the extra reference to a temp strong pointer so that it |
| // will be cleared outside `releaseBuffer`. |
| tempMemory = std::move(mCblkMemoryObtainBufferRef); |
| tempProxy = std::move(mProxyObtainBufferRef); |
| |
| // restart track if it was disabled by audioflinger due to previous underrun |
| restartIfDisabled(); |
| } |
| |
| void AudioTrack::restartIfDisabled() |
| { |
| int32_t flags = android_atomic_and(~CBLK_DISABLED, &mCblk->mFlags); |
| if ((mState == STATE_ACTIVE) && (flags & CBLK_DISABLED)) { |
| ALOGW("%s(%d): releaseBuffer() track %p disabled due to previous underrun, restarting", |
| __func__, mPortId, this); |
| // FIXME ignoring status |
| status_t status; |
| mAudioTrack->start(&status); |
| } |
| } |
| |
| // ------------------------------------------------------------------------- |
| |
| ssize_t AudioTrack::write(const void* buffer, size_t userSize, bool blocking) |
| { |
| if (mTransfer != TRANSFER_SYNC && mTransfer != TRANSFER_SYNC_NOTIF_CALLBACK) { |
| return INVALID_OPERATION; |
| } |
| |
| if (isDirect()) { |
| AutoMutex lock(mLock); |
| int32_t flags = android_atomic_and( |
| ~(CBLK_UNDERRUN | CBLK_LOOP_CYCLE | CBLK_LOOP_FINAL | CBLK_BUFFER_END), |
| &mCblk->mFlags); |
| if (flags & CBLK_INVALID) { |
| return DEAD_OBJECT; |
| } |
| } |
| |
| if (ssize_t(userSize) < 0 || (buffer == NULL && userSize != 0)) { |
| // Validation: user is most-likely passing an error code, and it would |
| // make the return value ambiguous (actualSize vs error). |
| ALOGE("%s(%d): AudioTrack::write(buffer=%p, size=%zu (%zd)", |
| __func__, mPortId, buffer, userSize, userSize); |
| return BAD_VALUE; |
| } |
| |
| size_t written = 0; |
| Buffer audioBuffer; |
| |
| while (userSize >= mFrameSize) { |
| audioBuffer.frameCount = userSize / mFrameSize; |
| |
| status_t err = obtainBuffer(&audioBuffer, |
| blocking ? &ClientProxy::kForever : &ClientProxy::kNonBlocking); |
| if (err < 0) { |
| if (written > 0) { |
| break; |
| } |
| if (err == TIMED_OUT || err == -EINTR) { |
| err = WOULD_BLOCK; |
| } |
| return ssize_t(err); |
| } |
| |
| size_t toWrite = audioBuffer.size(); |
| memcpy(audioBuffer.raw, buffer, toWrite); |
| buffer = ((const char *) buffer) + toWrite; |
| userSize -= toWrite; |
| written += toWrite; |
| |
| releaseBuffer(&audioBuffer); |
| } |
| |
| if (written > 0) { |
| mFramesWritten += written / mFrameSize; |
| |
| if (mTransfer == TRANSFER_SYNC_NOTIF_CALLBACK) { |
| const sp<AudioTrackThread> t = mAudioTrackThread; |
| if (t != 0) { |
| // causes wake up of the playback thread, that will callback the client for |
| // more data (with EVENT_CAN_WRITE_MORE_DATA) in processAudioBuffer() |
| t->wake(); |
| } |
| } |
| } |
| |
| return written; |
| } |
| |
| // ------------------------------------------------------------------------- |
| |
| nsecs_t AudioTrack::processAudioBuffer() |
| { |
| // Currently the AudioTrack thread is not created if there are no callbacks. |
| // Would it ever make sense to run the thread, even without callbacks? |
| // If so, then replace this by checks at each use for mCallback != NULL. |
| LOG_ALWAYS_FATAL_IF(mCblk == NULL); |
| mLock.lock(); |
| sp<IAudioTrackCallback> callback = mCallback.promote(); |
| if (!callback) { |
| mCallback = nullptr; |
| mLock.unlock(); |
| return NS_NEVER; |
| } |
| if (mAwaitBoost) { |
| mAwaitBoost = false; |
| mLock.unlock(); |
| static const int32_t kMaxTries = 5; |
| int32_t tryCounter = kMaxTries; |
| uint32_t pollUs = 10000; |
| do { |
| int policy = sched_getscheduler(0) & ~SCHED_RESET_ON_FORK; |
| if (policy == SCHED_FIFO || policy == SCHED_RR) { |
| break; |
| } |
| usleep(pollUs); |
| pollUs <<= 1; |
| } while (tryCounter-- > 0); |
| if (tryCounter < 0) { |
| ALOGE("%s(%d): did not receive expected priority boost on time", |
| __func__, mPortId); |
| } |
| // Run again immediately |
| return 0; |
| } |
| |
| // Can only reference mCblk while locked |
| int32_t flags = android_atomic_and( |
| ~(CBLK_UNDERRUN | CBLK_LOOP_CYCLE | CBLK_LOOP_FINAL | CBLK_BUFFER_END), &mCblk->mFlags); |
| |
| // Check for track invalidation |
| if (flags & CBLK_INVALID) { |
| // for offloaded tracks restoreTrack_l() will just update the sequence and clear |
| // AudioSystem cache. We should not exit here but after calling the callback so |
| // that the upper layers can recreate the track |
| if (!isOffloadedOrDirect_l() || (mSequence == mObservedSequence)) { |
| status_t status __unused = restoreTrack_l("processAudioBuffer"); |
| // FIXME unused status |
| // after restoration, continue below to make sure that the loop and buffer events |
| // are notified because they have been cleared from mCblk->mFlags above. |
| } |
| } |
| |
| bool waitStreamEnd = mState == STATE_STOPPING; |
| bool active = mState == STATE_ACTIVE; |
| |
| // Manage underrun callback, must be done under lock to avoid race with releaseBuffer() |
| bool newUnderrun = false; |
| if (flags & CBLK_UNDERRUN) { |
| #if 0 |
| // Currently in shared buffer mode, when the server reaches the end of buffer, |
| // the track stays active in continuous underrun state. It's up to the application |
| // to pause or stop the track, or set the position to a new offset within buffer. |
| // This was some experimental code to auto-pause on underrun. Keeping it here |
| // in "if 0" so we can re-visit this if we add a real sequencer for shared memory content. |
| if (mTransfer == TRANSFER_SHARED) { |
| mState = STATE_PAUSED; |
| active = false; |
| } |
| #endif |
| if (!mInUnderrun) { |
| mInUnderrun = true; |
| newUnderrun = true; |
| } |
| } |
| |
| // Get current position of server |
| Modulo<uint32_t> position(updateAndGetPosition_l()); |
| |
| // Manage marker callback |
| bool markerReached = false; |
| Modulo<uint32_t> markerPosition(mMarkerPosition); |
| // uses 32 bit wraparound for comparison with position. |
| if (!mMarkerReached && markerPosition.value() > 0 && position >= markerPosition) { |
| mMarkerReached = markerReached = true; |
| } |
| |
| // Determine number of new position callback(s) that will be needed, while locked |
| size_t newPosCount = 0; |
| Modulo<uint32_t> newPosition(mNewPosition); |
| uint32_t updatePeriod = mUpdatePeriod; |
| // FIXME fails for wraparound, need 64 bits |
| if (updatePeriod > 0 && position >= newPosition) { |
| newPosCount = ((position - newPosition).value() / updatePeriod) + 1; |
| mNewPosition += updatePeriod * newPosCount; |
| } |
| |
| // Cache other fields that will be needed soon |
| uint32_t sampleRate = mSampleRate; |
| float speed = mPlaybackRate.mSpeed; |
| const uint32_t notificationFrames = mNotificationFramesAct; |
| if (mRefreshRemaining) { |
| mRefreshRemaining = false; |
| mRemainingFrames = notificationFrames; |
| mRetryOnPartialBuffer = false; |
| } |
| size_t misalignment = mProxy->getMisalignment(); |
| uint32_t sequence = mSequence; |
| sp<AudioTrackClientProxy> proxy = mProxy; |
| |
| // Determine the number of new loop callback(s) that will be needed, while locked. |
| uint32_t loopCountNotifications = 0; |
| uint32_t loopPeriod = 0; // time in frames for next EVENT_LOOP_END or EVENT_BUFFER_END |
| |
| if (mLoopCount > 0) { |
| int loopCount; |
| size_t bufferPosition; |
| mStaticProxy->getBufferPositionAndLoopCount(&bufferPosition, &loopCount); |
| loopPeriod = ((loopCount > 0) ? mLoopEnd : mFrameCount) - bufferPosition; |
| loopCountNotifications = min(mLoopCountNotified - loopCount, kMaxLoopCountNotifications); |
| mLoopCountNotified = loopCount; // discard any excess notifications |
| } else if (mLoopCount < 0) { |
| // FIXME: We're not accurate with notification count and position with infinite looping |
| // since loopCount from server side will always return -1 (we could decrement it). |
| size_t bufferPosition = mStaticProxy->getBufferPosition(); |
| loopCountNotifications = int((flags & (CBLK_LOOP_CYCLE | CBLK_LOOP_FINAL)) != 0); |
| loopPeriod = mLoopEnd - bufferPosition; |
| } else if (/* mLoopCount == 0 && */ mSharedBuffer != 0) { |
| size_t bufferPosition = mStaticProxy->getBufferPosition(); |
| loopPeriod = mFrameCount - bufferPosition; |
| } |
| |
| // These fields don't need to be cached, because they are assigned only by set(): |
| // mTransfer, mCallback, mUserData, mFormat, mFrameSize, mFlags |
| // mFlags is also assigned by createTrack_l(), but not the bit we care about. |
| |
| mLock.unlock(); |
| |
| // get anchor time to account for callbacks. |
| const nsecs_t timeBeforeCallbacks = systemTime(); |
| |
| if (waitStreamEnd) { |
| // FIXME: Instead of blocking in proxy->waitStreamEndDone(), Callback thread |
| // should wait on proxy futex and handle CBLK_STREAM_END_DONE within this function |
| // (and make sure we don't callback for more data while we're stopping). |
| // This helps with position, marker notifications, and track invalidation. |
| struct timespec timeout; |
| timeout.tv_sec = WAIT_STREAM_END_TIMEOUT_SEC; |
| timeout.tv_nsec = 0; |
| |
| // Use timestamp progress to safeguard we don't falsely time out. |
| AudioTimestamp timestamp{}; |
| const bool isTimestampValid = getTimestamp(timestamp) == OK; |
| const auto frameCount = isTimestampValid ? timestamp.mPosition : 0; |
| |
| status_t status = proxy->waitStreamEndDone(&timeout); |
| switch (status) { |
| case TIMED_OUT: |
| if (isTimestampValid |
| && getTimestamp(timestamp) == OK && frameCount != timestamp.mPosition) { |
| ALOGD("%s: waitStreamEndDone retrying", __func__); |
| break; // we retry again (and recheck possible state change). |
| } |
| [[fallthrough]]; |
| case NO_ERROR: |
| case DEAD_OBJECT: |
| if (status != DEAD_OBJECT) { |
| // for DEAD_OBJECT, we do not send a EVENT_STREAM_END after stop(); |
| // instead, the application should handle the EVENT_NEW_IAUDIOTRACK. |
| callback->onStreamEnd(); |
| } |
| { |
| AutoMutex lock(mLock); |
| // The previously assigned value of waitStreamEnd is no longer valid, |
| // since the mutex has been unlocked and either the callback handler |
| // or another thread could have re-started the AudioTrack during that time. |
| waitStreamEnd = mState == STATE_STOPPING; |
| if (waitStreamEnd) { |
| mState = STATE_STOPPED; |
| mReleased = 0; |
| } |
| } |
| if (waitStreamEnd && status != DEAD_OBJECT) { |
| ALOGV("%s: waitStreamEndDone complete", __func__); |
| return NS_INACTIVE; |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| // perform callbacks while unlocked |
| if (newUnderrun) { |
| callback->onUnderrun(); |
| } |
| while (loopCountNotifications > 0) { |
| --loopCountNotifications; |
| callback->onLoopEnd(mLoopCount > 0 ? loopCountNotifications + mLoopCountNotified : -1); |
| } |
| if (flags & CBLK_BUFFER_END) { |
| callback->onBufferEnd(); |
| } |
| if (markerReached) { |
| callback->onMarker(markerPosition.value()); |
| } |
| while (newPosCount > 0) { |
| callback->onNewPos(newPosition.value()); |
| newPosition += updatePeriod; |
| newPosCount--; |
| } |
| |
| if (mObservedSequence != sequence) { |
| mObservedSequence = sequence; |
| callback->onNewIAudioTrack(); |
| // for offloaded tracks, just wait for the upper layers to recreate the track |
| if (isOffloadedOrDirect()) { |
| return NS_INACTIVE; |
| } |
| } |
| |
| // if inactive, then don't run me again until re-started |
| if (!active) { |
| return NS_INACTIVE; |
| } |
| |
| // Compute the estimated time until the next timed event (position, markers, loops) |
| // FIXME only for non-compressed audio |
| uint32_t minFrames = ~0; |
| if (!markerReached && position < markerPosition) { |
| minFrames = (markerPosition - position).value(); |
| } |
| if (loopPeriod > 0 && loopPeriod < minFrames) { |
| // loopPeriod is already adjusted for actual position. |
| minFrames = loopPeriod; |
| } |
| if (updatePeriod > 0) { |
| minFrames = min(minFrames, (newPosition - position).value()); |
| } |
| |
| // If > 0, poll periodically to recover from a stuck server. A good value is 2. |
| static const uint32_t kPoll = 0; |
| if (kPoll > 0 && mTransfer == TRANSFER_CALLBACK && kPoll * notificationFrames < minFrames) { |
| minFrames = kPoll * notificationFrames; |
| } |
| |
| // This "fudge factor" avoids soaking CPU, and compensates for late progress by server |
| static const nsecs_t kWaitPeriodNs = WAIT_PERIOD_MS * 1000000LL; |
| const nsecs_t timeAfterCallbacks = systemTime(); |
| |
| // Convert frame units to time units |
| nsecs_t ns = NS_WHENEVER; |
| if (minFrames != (uint32_t) ~0) { |
| // AudioFlinger consumption of client data may be irregular when coming out of device |
| // standby since the kernel buffers require filling. This is throttled to no more than 2x |
| // the expected rate in the MixerThread. Hence, we reduce the estimated time to wait by one |
| // half (but no more than half a second) to improve callback accuracy during these temporary |
| // data surges. |
| const nsecs_t estimatedNs = framesToNanoseconds(minFrames, sampleRate, speed); |
| constexpr nsecs_t maxThrottleCompensationNs = 500000000LL; |
| ns = estimatedNs - min(estimatedNs / 2, maxThrottleCompensationNs) + kWaitPeriodNs; |
| ns -= (timeAfterCallbacks - timeBeforeCallbacks); // account for callback time |
| // TODO: Should we warn if the callback time is too long? |
| if (ns < 0) ns = 0; |
| } |
| |
| // If not supplying data by EVENT_MORE_DATA or EVENT_CAN_WRITE_MORE_DATA, then we're done |
| if (mTransfer != TRANSFER_CALLBACK && mTransfer != TRANSFER_SYNC_NOTIF_CALLBACK) { |
| return ns; |
| } |
| |
| // EVENT_MORE_DATA callback handling. |
| // Timing for linear pcm audio data formats can be derived directly from the |
| // buffer fill level. |
| // Timing for compressed data is not directly available from the buffer fill level, |
| // rather indirectly from waiting for blocking mode callbacks or waiting for obtain() |
| // to return a certain fill level. |
| |
| struct timespec timeout; |
| const struct timespec *requested = &ClientProxy::kForever; |
| if (ns != NS_WHENEVER) { |
| timeout.tv_sec = ns / 1000000000LL; |
| timeout.tv_nsec = ns % 1000000000LL; |
| ALOGV("%s(%d): timeout %ld.%03d", |
| __func__, mPortId, timeout.tv_sec, (int) timeout.tv_nsec / 1000000); |
| requested = &timeout; |
| } |
| |
| size_t writtenFrames = 0; |
| while (mRemainingFrames > 0) { |
| |
| Buffer audioBuffer; |
| audioBuffer.frameCount = mRemainingFrames; |
| size_t nonContig; |
| status_t err = obtainBuffer(&audioBuffer, requested, NULL, &nonContig); |
| LOG_ALWAYS_FATAL_IF((err != NO_ERROR) != (audioBuffer.frameCount == 0), |
| "%s(%d): obtainBuffer() err=%d frameCount=%zu", |
| __func__, mPortId, err, audioBuffer.frameCount); |
| requested = &ClientProxy::kNonBlocking; |
| size_t avail = audioBuffer.frameCount + nonContig; |
| ALOGV("%s(%d): obtainBuffer(%u) returned %zu = %zu + %zu err %d", |
| __func__, mPortId, mRemainingFrames, avail, audioBuffer.frameCount, nonContig, err); |
| if (err != NO_ERROR) { |
| if (err == TIMED_OUT || err == WOULD_BLOCK || err == -EINTR || |
| (isOffloaded() && (err == DEAD_OBJECT))) { |
| // FIXME bug 25195759 |
| return 1000000; |
| } |
| ALOGE("%s(%d): Error %d obtaining an audio buffer, giving up.", |
| __func__, mPortId, err); |
| return NS_NEVER; |
| } |
| |
| if (mRetryOnPartialBuffer && audio_has_proportional_frames(mFormat)) { |
| mRetryOnPartialBuffer = false; |
| if (avail < mRemainingFrames) { |
| if (ns > 0) { // account for obtain time |
| const nsecs_t timeNow = systemTime(); |
| ns = max((nsecs_t)0, ns - (timeNow - timeAfterCallbacks)); |
| } |
| |
| // delayNs is first computed by the additional frames required in the buffer. |
| nsecs_t delayNs = framesToNanoseconds( |
| mRemainingFrames - avail, sampleRate, speed); |
| |
| // afNs is the AudioFlinger mixer period in ns. |
| const nsecs_t afNs = framesToNanoseconds(mAfFrameCount, mAfSampleRate, speed); |
| |
| // If the AudioTrack is double buffered based on the AudioFlinger mixer period, |
| // we may have a race if we wait based on the number of frames desired. |
| // This is a possible issue with resampling and AAudio. |
| // |
| // The granularity of audioflinger processing is one mixer period; if |
| // our wait time is less than one mixer period, wait at most half the period. |
| if (delayNs < afNs) { |
| delayNs = std::min(delayNs, afNs / 2); |
| } |
| |
| // adjust our ns wait by delayNs. |
| if (ns < 0 /* NS_WHENEVER */ || delayNs < ns) { |
| ns = delayNs; |
| } |
| return ns; |
| } |
| } |
| |
| size_t reqSize = audioBuffer.size(); |
| if (mTransfer == TRANSFER_SYNC_NOTIF_CALLBACK) { |
| // when notifying client it can write more data, pass the total size that can be |
| // written in the next write() call, since it's not passed through the callback |
| audioBuffer.mSize += nonContig; |
| } |
| const size_t writtenSize = (mTransfer == TRANSFER_CALLBACK) |
| ? callback->onMoreData(audioBuffer) |
| : callback->onCanWriteMoreData(audioBuffer); |
| // Validate on returned size |
| if (ssize_t(writtenSize) < 0 || writtenSize > reqSize) { |
| ALOGE("%s(%d): EVENT_MORE_DATA requested %zu bytes but callback returned %zd bytes", |
| __func__, mPortId, reqSize, ssize_t(writtenSize)); |
| return NS_NEVER; |
| } |
| |
| if (writtenSize == 0) { |
| if (mTransfer == TRANSFER_SYNC_NOTIF_CALLBACK) { |
| // The callback EVENT_CAN_WRITE_MORE_DATA was processed in the JNI of |
| // android.media.AudioTrack. The JNI is not using the callback to provide data, |
| // it only signals to the Java client that it can provide more data, which |
| // this track is read to accept now. |
| // The playback thread will be awaken at the next ::write() |
| return NS_WHENEVER; |
| } |
| // The callback is done filling buffers |
| // Keep this thread going to handle timed events and |
| // still try to get more data in intervals of WAIT_PERIOD_MS |
| // but don't just loop and block the CPU, so wait |
| |
| // mCbf(EVENT_MORE_DATA, ...) might either |
| // (1) Block until it can fill the buffer, returning 0 size on EOS. |
| // (2) Block until it can fill the buffer, returning 0 data (silence) on EOS. |
| // (3) Return 0 size when no data is available, does not wait for more data. |
| // |
| // (1) and (2) occurs with AudioPlayer/AwesomePlayer; (3) occurs with NuPlayer. |
| // We try to compute the wait time to avoid a tight sleep-wait cycle, |
| // especially for case (3). |
| // |
| // The decision to support (1) and (2) affect the sizing of mRemainingFrames |
| // and this loop; whereas for case (3) we could simply check once with the full |
| // buffer size and skip the loop entirely. |
| |
| nsecs_t myns; |
| if (audio_has_proportional_frames(mFormat)) { |
| // time to wait based on buffer occupancy |
| const nsecs_t datans = mRemainingFrames <= avail ? 0 : |
| framesToNanoseconds(mRemainingFrames - avail, sampleRate, speed); |
| // audio flinger thread buffer size (TODO: adjust for fast tracks) |
| // FIXME: use mAfFrameCountHAL instead of mAfFrameCount below for fast tracks. |
| const nsecs_t afns = framesToNanoseconds(mAfFrameCount, mAfSampleRate, speed); |
| // add a half the AudioFlinger buffer time to avoid soaking CPU if datans is 0. |
| myns = datans + (afns / 2); |
| } else { |
| // FIXME: This could ping quite a bit if the buffer isn't full. |
| // Note that when mState is stopping we waitStreamEnd, so it never gets here. |
| myns = kWaitPeriodNs; |
| } |
| if (ns > 0) { // account for obtain and callback time |
| const nsecs_t timeNow = systemTime(); |
| ns = max((nsecs_t)0, ns - (timeNow - timeAfterCallbacks)); |
| } |
| if (ns < 0 /* NS_WHENEVER */ || myns < ns) { |
| ns = myns; |
| } |
| return ns; |
| } |
| |
| // releaseBuffer reads from audioBuffer.size |
| audioBuffer.mSize = writtenSize; |
| |
| size_t releasedFrames = writtenSize / mFrameSize; |
| audioBuffer.frameCount = releasedFrames; |
| mRemainingFrames -= releasedFrames; |
| if (misalignment >= releasedFrames) { |
| misalignment -= releasedFrames; |
| } else { |
| misalignment = 0; |
| } |
| |
| releaseBuffer(&audioBuffer); |
| writtenFrames += releasedFrames; |
| |
| // FIXME here is where we would repeat EVENT_MORE_DATA again on same advanced buffer |
| // if callback doesn't like to accept the full chunk |
| if (writtenSize < reqSize) { |
| continue; |
| } |
| |
| // There could be enough non-contiguous frames available to satisfy the remaining request |
| if (mRemainingFrames <= nonContig) { |
| continue; |
| } |
| |
| #if 0 |
| // This heuristic tries to collapse a series of EVENT_MORE_DATA that would total to a |
| // sum <= notificationFrames. It replaces that series by at most two EVENT_MORE_DATA |
| // that total to a sum == notificationFrames. |
| if (0 < misalignment && misalignment <= mRemainingFrames) { |
| mRemainingFrames = misalignment; |
| return ((double)mRemainingFrames * 1100000000) / ((double)sampleRate * speed); |
| } |
| #endif |
| |
| } |
| if (writtenFrames > 0) { |
| AutoMutex lock(mLock); |
| mFramesWritten += writtenFrames; |
| } |
| mRemainingFrames = notificationFrames; |
| mRetryOnPartialBuffer = true; |
| |
| // A lot has transpired since ns was calculated, so run again immediately and re-calculate |
| return 0; |
| } |
| |
| status_t AudioTrack::restoreTrack_l(const char *from, bool forceRestore) |
| { |
| status_t result = NO_ERROR; // logged: make sure to set this before returning. |
| const int64_t beginNs = systemTime(); |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_RESTORE) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(systemTime() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, stateToString(mState)) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)result) |
| .set(AMEDIAMETRICS_PROP_WHERE, from) |
| .record(); }); |
| |
| ALOGW("%s(%d): dead IAudioTrack, %s, creating a new one from %s()", |
| __func__, mPortId, isOffloadedOrDirect_l() ? "Offloaded or Direct" : "PCM", from); |
| ++mSequence; |
| |
| // refresh the audio configuration cache in this process to make sure we get new |
| // output parameters and new IAudioFlinger in createTrack_l() |
| AudioSystem::clearAudioConfigCache(); |
| |
| if (!forceRestore && |
| (isOffloadedOrDirect_l() || mDoNotReconnect)) { |
| // FIXME re-creation of offloaded and direct tracks is not yet implemented; |
| // Disabled since (1) timestamp correction is not implemented for non-PCM and |
| // (2) We pre-empt existing direct tracks on resource constraint, so these tracks |
| // shouldn't reconnect. |
| result = DEAD_OBJECT; |
| return result; |
| } |
| |
| // Save so we can return count since creation. |
| mUnderrunCountOffset = getUnderrunCount_l(); |
| |
| // save the old static buffer position |
| uint32_t staticPosition = 0; |
| size_t bufferPosition = 0; |
| int loopCount = 0; |
| if (mStaticProxy != 0) { |
| mStaticProxy->getBufferPositionAndLoopCount(&bufferPosition, &loopCount); |
| staticPosition = mStaticProxy->getPosition().unsignedValue(); |
| } |
| |
| // save the old startThreshold and framecount |
| const uint32_t originalStartThresholdInFrames = mProxy->getStartThresholdInFrames(); |
| const uint32_t originalFrameCount = mProxy->frameCount(); |
| |
| // See b/74409267. Connecting to a BT A2DP device supporting multiple codecs |
| // causes a lot of churn on the service side, and it can reject starting |
| // playback of a previously created track. May also apply to other cases. |
| const int INITIAL_RETRIES = 3; |
| int retries = INITIAL_RETRIES; |
| retry: |
| if (retries < INITIAL_RETRIES) { |
| // See the comment for clearAudioConfigCache at the start of the function. |
| AudioSystem::clearAudioConfigCache(); |
| } |
| mFlags = mOrigFlags; |
| |
| // If a new IAudioTrack is successfully created, createTrack_l() will modify the |
| // following member variables: mAudioTrack, mCblkMemory and mCblk. |
| // It will also delete the strong references on previous IAudioTrack and IMemory. |
| // If a new IAudioTrack cannot be created, the previous (dead) instance will be left intact. |
| result = createTrack_l(); |
| |
| if (result == NO_ERROR) { |
| // take the frames that will be lost by track recreation into account in saved position |
| // For streaming tracks, this is the amount we obtained from the user/client |
| // (not the number actually consumed at the server - those are already lost). |
| if (mStaticProxy == 0) { |
| mPosition = mReleased; |
| } |
| // Continue playback from last known position and restore loop. |
| if (mStaticProxy != 0) { |
| if (loopCount != 0) { |
| mStaticProxy->setBufferPositionAndLoop(bufferPosition, |
| mLoopStart, mLoopEnd, loopCount); |
| } else { |
| mStaticProxy->setBufferPosition(bufferPosition); |
| if (bufferPosition == mFrameCount) { |
| ALOGD("%s(%d): restoring track at end of static buffer", __func__, mPortId); |
| } |
| } |
| } |
| // restore volume handler |
| mVolumeHandler->forall([this](const VolumeShaper &shaper) -> VolumeShaper::Status { |
| sp<VolumeShaper::Operation> operationToEnd = |
| new VolumeShaper::Operation(shaper.mOperation); |
| // TODO: Ideally we would restore to the exact xOffset position |
| // as returned by getVolumeShaperState(), but we don't have that |
| // information when restoring at the client unless we periodically poll |
| // the server or create shared memory state. |
| // |
| // For now, we simply advance to the end of the VolumeShaper effect |
| // if it has been started. |
| if (shaper.isStarted()) { |
| operationToEnd->setNormalizedTime(1.f); |
| } |
| media::VolumeShaperConfiguration config; |
| shaper.mConfiguration->writeToParcelable(&config); |
| media::VolumeShaperOperation operation; |
| operationToEnd->writeToParcelable(&operation); |
| status_t status; |
| mAudioTrack->applyVolumeShaper(config, operation, &status); |
| return status; |
| }); |
| |
| // restore the original start threshold if different than frameCount. |
| if (originalStartThresholdInFrames != originalFrameCount) { |
| // Note: mProxy->setStartThresholdInFrames() call is in the Proxy |
| // and does not trigger a restart. |
| // (Also CBLK_DISABLED is not set, buffers are empty after track recreation). |
| // Any start would be triggered on the mState == ACTIVE check below. |
| const uint32_t currentThreshold = |
| mProxy->setStartThresholdInFrames(originalStartThresholdInFrames); |
| ALOGD_IF(originalStartThresholdInFrames != currentThreshold, |
| "%s(%d) startThresholdInFrames changing from %u to %u", |
| __func__, mPortId, originalStartThresholdInFrames, currentThreshold); |
| } |
| if (mState == STATE_ACTIVE) { |
| mAudioTrack->start(&result); |
| } |
| // server resets to zero so we offset |
| mFramesWrittenServerOffset = |
| mStaticProxy.get() != nullptr ? staticPosition : mFramesWritten; |
| mFramesWrittenAtRestore = mFramesWrittenServerOffset; |
| } |
| if (result != NO_ERROR) { |
| ALOGW("%s(%d): failed status %d, retries %d", __func__, mPortId, result, retries); |
| if (--retries > 0) { |
| // leave time for an eventual race condition to clear before retrying |
| usleep(500000); |
| goto retry; |
| } |
| // if no retries left, set invalid bit to force restoring at next occasion |
| // and avoid inconsistent active state on client and server sides |
| if (mCblk != nullptr) { |
| android_atomic_or(CBLK_INVALID, &mCblk->mFlags); |
| } |
| } |
| return result; |
| } |
| |
| Modulo<uint32_t> AudioTrack::updateAndGetPosition_l() |
| { |
| // This is the sole place to read server consumed frames |
| Modulo<uint32_t> newServer(mProxy->getPosition()); |
| const int32_t delta = (newServer - mServer).signedValue(); |
| // TODO There is controversy about whether there can be "negative jitter" in server position. |
| // This should be investigated further, and if possible, it should be addressed. |
| // A more definite failure mode is infrequent polling by client. |
| // One could call (void)getPosition_l() in releaseBuffer(), |
| // so mReleased and mPosition are always lock-step as best possible. |
| // That should ensure delta never goes negative for infrequent polling |
| // unless the server has more than 2^31 frames in its buffer, |
| // in which case the use of uint32_t for these counters has bigger issues. |
| ALOGE_IF(delta < 0, |
| "%s(%d): detected illegal retrograde motion by the server: mServer advanced by %d", |
| __func__, mPortId, delta); |
| mServer = newServer; |
| if (delta > 0) { // avoid retrograde |
| mPosition += delta; |
| } |
| return mPosition; |
| } |
| |
| bool AudioTrack::isSampleRateSpeedAllowed_l(uint32_t sampleRate, float speed) |
| { |
| updateLatency_l(); |
| // applicable for mixing tracks only (not offloaded or direct) |
| if (mStaticProxy != 0) { |
| return true; // static tracks do not have issues with buffer sizing. |
| } |
| const size_t minFrameCount = |
| AudioSystem::calculateMinFrameCount(mAfLatency, mAfFrameCount, mAfSampleRate, |
| sampleRate, speed /*, 0 mNotificationsPerBufferReq*/); |
| const bool allowed = mFrameCount >= minFrameCount; |
| ALOGD_IF(!allowed, |
| "%s(%d): denied " |
| "mAfLatency:%u mAfFrameCount:%zu mAfSampleRate:%u sampleRate:%u speed:%f " |
| "mFrameCount:%zu < minFrameCount:%zu", |
| __func__, mPortId, |
| mAfLatency, mAfFrameCount, mAfSampleRate, sampleRate, speed, |
| mFrameCount, minFrameCount); |
| return allowed; |
| } |
| |
| status_t AudioTrack::setParameters(const String8& keyValuePairs) |
| { |
| AutoMutex lock(mLock); |
| status_t status; |
| mAudioTrack->setParameters(keyValuePairs.c_str(), &status); |
| return status; |
| } |
| |
| status_t AudioTrack::selectPresentation(int presentationId, int programId) |
| { |
| AutoMutex lock(mLock); |
| AudioParameter param = AudioParameter(); |
| param.addInt(String8(AudioParameter::keyPresentationId), presentationId); |
| param.addInt(String8(AudioParameter::keyProgramId), programId); |
| ALOGV("%s(%d): PresentationId/ProgramId[%s]", |
| __func__, mPortId, param.toString().c_str()); |
| |
| status_t status; |
| mAudioTrack->setParameters(param.toString().c_str(), &status); |
| return status; |
| } |
| |
| VolumeShaper::Status AudioTrack::applyVolumeShaper( |
| const sp<VolumeShaper::Configuration>& configuration, |
| const sp<VolumeShaper::Operation>& operation) |
| { |
| AutoMutex lock(mLock); |
| mVolumeHandler->setIdIfNecessary(configuration); |
| media::VolumeShaperConfiguration config; |
| configuration->writeToParcelable(&config); |
| media::VolumeShaperOperation op; |
| operation->writeToParcelable(&op); |
| VolumeShaper::Status status; |
| mAudioTrack->applyVolumeShaper(config, op, &status); |
| |
| if (status == DEAD_OBJECT) { |
| if (restoreTrack_l("applyVolumeShaper") == OK) { |
| mAudioTrack->applyVolumeShaper(config, op, &status); |
| } |
| } |
| if (status >= 0) { |
| // save VolumeShaper for restore |
| mVolumeHandler->applyVolumeShaper(configuration, operation); |
| if (mState == STATE_ACTIVE || mState == STATE_STOPPING) { |
| mVolumeHandler->setStarted(); |
| } |
| } else { |
| // warn only if not an expected restore failure. |
| ALOGW_IF(!((isOffloadedOrDirect_l() || mDoNotReconnect) && status == DEAD_OBJECT), |
| "%s(%d): applyVolumeShaper failed: %d", __func__, mPortId, status); |
| } |
| return status; |
| } |
| |
| sp<VolumeShaper::State> AudioTrack::getVolumeShaperState(int id) |
| { |
| AutoMutex lock(mLock); |
| std::optional<media::VolumeShaperState> vss; |
| mAudioTrack->getVolumeShaperState(id, &vss); |
| sp<VolumeShaper::State> state; |
| if (vss.has_value()) { |
| state = new VolumeShaper::State(); |
| state->readFromParcelable(vss.value()); |
| } |
| if (state.get() == nullptr && (mCblk->mFlags & CBLK_INVALID) != 0) { |
| if (restoreTrack_l("getVolumeShaperState") == OK) { |
| mAudioTrack->getVolumeShaperState(id, &vss); |
| if (vss.has_value()) { |
| state = new VolumeShaper::State(); |
| state->readFromParcelable(vss.value()); |
| } |
| } |
| } |
| return state; |
| } |
| |
| status_t AudioTrack::getTimestamp(ExtendedTimestamp *timestamp) |
| { |
| if (timestamp == nullptr) { |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| return getTimestamp_l(timestamp); |
| } |
| |
| status_t AudioTrack::getTimestamp_l(ExtendedTimestamp *timestamp) |
| { |
| if (mCblk->mFlags & CBLK_INVALID) { |
| const status_t status = restoreTrack_l("getTimestampExtended"); |
| if (status != OK) { |
| // per getTimestamp() API doc in header, we return DEAD_OBJECT here, |
| // recommending that the track be recreated. |
| return DEAD_OBJECT; |
| } |
| } |
| // check for offloaded/direct here in case restoring somehow changed those flags. |
| if (isOffloadedOrDirect_l()) { |
| return INVALID_OPERATION; // not supported |
| } |
| status_t status = mProxy->getTimestamp(timestamp); |
| LOG_ALWAYS_FATAL_IF(status != OK, "%s(%d): status %d not allowed from proxy getTimestamp", |
| __func__, mPortId, status); |
| bool found = false; |
| timestamp->mPosition[ExtendedTimestamp::LOCATION_CLIENT] = mFramesWritten; |
| timestamp->mTimeNs[ExtendedTimestamp::LOCATION_CLIENT] = 0; |
| // server side frame offset in case AudioTrack has been restored. |
| for (int i = ExtendedTimestamp::LOCATION_SERVER; |
| i < ExtendedTimestamp::LOCATION_MAX; ++i) { |
| if (timestamp->mTimeNs[i] >= 0) { |
| // apply server offset (frames flushed is ignored |
| // so we don't report the jump when the flush occurs). |
| timestamp->mPosition[i] += mFramesWrittenServerOffset; |
| found = true; |
| } |
| } |
| return found ? OK : WOULD_BLOCK; |
| } |
| |
| status_t AudioTrack::getTimestamp(AudioTimestamp& timestamp) |
| { |
| AutoMutex lock(mLock); |
| return getTimestamp_l(timestamp); |
| } |
| |
| status_t AudioTrack::getTimestamp_l(AudioTimestamp& timestamp) |
| { |
| bool previousTimestampValid = mPreviousTimestampValid; |
| // Set false here to cover all the error return cases. |
| mPreviousTimestampValid = false; |
| |
| switch (mState) { |
| case STATE_ACTIVE: |
| case STATE_PAUSED: |
| break; // handle below |
| case STATE_FLUSHED: |
| case STATE_STOPPED: |
| return WOULD_BLOCK; |
| case STATE_STOPPING: |
| case STATE_PAUSED_STOPPING: |
| if (!isOffloaded_l()) { |
| return INVALID_OPERATION; |
| } |
| break; // offloaded tracks handled below |
| default: |
| LOG_ALWAYS_FATAL("%s(%d): Invalid mState in getTimestamp(): %d", |
| __func__, mPortId, mState); |
| break; |
| } |
| |
| if (mCblk->mFlags & CBLK_INVALID) { |
| const status_t status = restoreTrack_l("getTimestamp"); |
| if (status != OK) { |
| // per getTimestamp() API doc in header, we return DEAD_OBJECT here, |
| // recommending that the track be recreated. |
| return DEAD_OBJECT; |
| } |
| } |
| |
| // The presented frame count must always lag behind the consumed frame count. |
| // To avoid a race, read the presented frames first. This ensures that presented <= consumed. |
| |
| status_t status; |
| if (isAfTrackOffloadedOrDirect_l()) { |
| // use Binder to get timestamp |
| media::AudioTimestampInternal ts; |
| mAudioTrack->getTimestamp(&ts, &status); |
| if (status == OK) { |
| timestamp = VALUE_OR_FATAL(aidl2legacy_AudioTimestampInternal_AudioTimestamp(ts)); |
| } |
| } else { |
| // read timestamp from shared memory |
| ExtendedTimestamp ets; |
| status = mProxy->getTimestamp(&ets); |
| if (status == OK) { |
| ExtendedTimestamp::Location location; |
| status = ets.getBestTimestamp(×tamp, &location); |
| |
| if (status == OK) { |
| updateLatency_l(); |
| // It is possible that the best location has moved from the kernel to the server. |
| // In this case we adjust the position from the previous computed latency. |
| if (location == ExtendedTimestamp::LOCATION_SERVER) { |
| ALOGW_IF(mPreviousLocation == ExtendedTimestamp::LOCATION_KERNEL, |
| "%s(%d): location moved from kernel to server", |
| __func__, mPortId); |
| // check that the last kernel OK time info exists and the positions |
| // are valid (if they predate the current track, the positions may |
| // be zero or negative). |
| const int64_t frames = |
| (ets.mTimeNs[ExtendedTimestamp::LOCATION_SERVER_LASTKERNELOK] < 0 || |
| ets.mTimeNs[ExtendedTimestamp::LOCATION_KERNEL_LASTKERNELOK] < 0 || |
| ets.mPosition[ExtendedTimestamp::LOCATION_SERVER_LASTKERNELOK] <= 0 || |
| ets.mPosition[ExtendedTimestamp::LOCATION_KERNEL_LASTKERNELOK] <= 0) |
| ? |
| int64_t((double)mAfLatency * mSampleRate * mPlaybackRate.mSpeed |
| / 1000) |
| : |
| (ets.mPosition[ExtendedTimestamp::LOCATION_SERVER_LASTKERNELOK] |
| - ets.mPosition[ExtendedTimestamp::LOCATION_KERNEL_LASTKERNELOK]); |
| ALOGV("%s(%d): frame adjustment:%lld timestamp:%s", |
| __func__, mPortId, (long long)frames, ets.toString().c_str()); |
| if (frames >= ets.mPosition[location]) { |
| timestamp.mPosition = 0; |
| } else { |
| timestamp.mPosition = (uint32_t)(ets.mPosition[location] - frames); |
| } |
| } else if (location == ExtendedTimestamp::LOCATION_KERNEL) { |
| ALOGV_IF(mPreviousLocation == ExtendedTimestamp::LOCATION_SERVER, |
| "%s(%d): location moved from server to kernel", |
| __func__, mPortId); |
| |
| if (ets.mPosition[ExtendedTimestamp::LOCATION_SERVER] == |
| ets.mPosition[ExtendedTimestamp::LOCATION_KERNEL]) { |
| // In Q, we don't return errors as an invalid time |
| // but instead we leave the last kernel good timestamp alone. |
| // |
| // If server is identical to kernel, the device data pipeline is idle. |
| // A better start time is now. The retrograde check ensures |
| // timestamp monotonicity. |
| const int64_t nowNs = systemTime(); |
| if (!mTimestampStallReported) { |
| ALOGD("%s(%d): device stall time corrected using current time %lld", |
| __func__, mPortId, (long long)nowNs); |
| mTimestampStallReported = true; |
| } |
| timestamp.mTime = convertNsToTimespec(nowNs); |
| } else { |
| mTimestampStallReported = false; |
| } |
| } |
| |
| // We update the timestamp time even when paused. |
| if (mState == STATE_PAUSED /* not needed: STATE_PAUSED_STOPPING */) { |
| const int64_t now = systemTime(); |
| const int64_t at = audio_utils_ns_from_timespec(×tamp.mTime); |
| const int64_t lag = |
| (ets.mTimeNs[ExtendedTimestamp::LOCATION_SERVER_LASTKERNELOK] < 0 || |
| ets.mTimeNs[ExtendedTimestamp::LOCATION_KERNEL_LASTKERNELOK] < 0) |
| ? int64_t(mAfLatency * 1000000LL) |
| : (ets.mPosition[ExtendedTimestamp::LOCATION_SERVER_LASTKERNELOK] |
| - ets.mPosition[ExtendedTimestamp::LOCATION_KERNEL_LASTKERNELOK]) |
| * NANOS_PER_SECOND / mSampleRate; |
| const int64_t limit = now - lag; // no earlier than this limit |
| if (at < limit) { |
| ALOGV("timestamp pause lag:%lld adjusting from %lld to %lld", |
| (long long)lag, (long long)at, (long long)limit); |
| timestamp.mTime = convertNsToTimespec(limit); |
| } |
| } |
| mPreviousLocation = location; |
| } else { |
| // right after AudioTrack is started, one may not find a timestamp |
| ALOGV("%s(%d): getBestTimestamp did not find timestamp", __func__, mPortId); |
| } |
| } |
| if (status == INVALID_OPERATION) { |
| // INVALID_OPERATION occurs when no timestamp has been issued by the server; |
| // other failures are signaled by a negative time. |
| // If we come out of FLUSHED or STOPPED where the position is known |
| // to be zero we convert this to WOULD_BLOCK (with the implicit meaning of |
| // "zero" for NuPlayer). We don't convert for track restoration as position |
| // does not reset. |
| ALOGV("%s(%d): timestamp server offset:%lld restore frames:%lld", |
| __func__, mPortId, |
| (long long)mFramesWrittenServerOffset, (long long)mFramesWrittenAtRestore); |
| if (mFramesWrittenServerOffset != mFramesWrittenAtRestore) { |
| status = WOULD_BLOCK; |
| } |
| } |
| } |
| if (status != NO_ERROR) { |
| ALOGV_IF(status != WOULD_BLOCK, "%s(%d): getTimestamp error:%#x", __func__, mPortId, status); |
| return status; |
| } |
| if (isAfTrackOffloadedOrDirect_l()) { |
| if (isOffloaded_l() && (mState == STATE_PAUSED || mState == STATE_PAUSED_STOPPING)) { |
| // use cached paused position in case another offloaded track is running. |
| timestamp.mPosition = mPausedPosition; |
| clock_gettime(CLOCK_MONOTONIC, ×tamp.mTime); |
| // TODO: adjust for delay |
| return NO_ERROR; |
| } |
| |
| // Check whether a pending flush or stop has completed, as those commands may |
| // be asynchronous or return near finish or exhibit glitchy behavior. |
| // |
| // Originally this showed up as the first timestamp being a continuation of |
| // the previous song under gapless playback. |
| // However, we sometimes see zero timestamps, then a glitch of |
| // the previous song's position, and then correct timestamps afterwards. |
| if (mStartFromZeroUs != 0 && mSampleRate != 0) { |
| static const int kTimeJitterUs = 100000; // 100 ms |
| static const int k1SecUs = 1000000; |
| |
| const int64_t timeNow = getNowUs(); |
| |
| if (timeNow < mStartFromZeroUs + k1SecUs) { // within first second of starting |
| const int64_t timestampTimeUs = convertTimespecToUs(timestamp.mTime); |
| if (timestampTimeUs < mStartFromZeroUs) { |
| return WOULD_BLOCK; // stale timestamp time, occurs before start. |
| } |
| const int64_t deltaTimeUs = timestampTimeUs - mStartFromZeroUs; |
| const int64_t deltaPositionByUs = (double)timestamp.mPosition * 1000000 |
| / ((double)mSampleRate * mPlaybackRate.mSpeed); |
| |
| if (deltaPositionByUs > deltaTimeUs + kTimeJitterUs) { |
| // Verify that the counter can't count faster than the sample rate |
| // since the start time. If greater, then that means we may have failed |
| // to completely flush or stop the previous playing track. |
| ALOGW_IF(!mTimestampStartupGlitchReported, |
| "%s(%d): startup glitch detected" |
| " deltaTimeUs(%lld) deltaPositionUs(%lld) tsmPosition(%u)", |
| __func__, mPortId, |
| (long long)deltaTimeUs, (long long)deltaPositionByUs, |
| timestamp.mPosition); |
| mTimestampStartupGlitchReported = true; |
| if (previousTimestampValid |
| && mPreviousTimestamp.mPosition == 0 /* should be true if valid */) { |
| timestamp = mPreviousTimestamp; |
| mPreviousTimestampValid = true; |
| return NO_ERROR; |
| } |
| return WOULD_BLOCK; |
| } |
| if (deltaPositionByUs != 0) { |
| mStartFromZeroUs = 0; // don't check again, we got valid nonzero position. |
| } |
| } else { |
| mStartFromZeroUs = 0; // don't check again, start time expired. |
| } |
| mTimestampStartupGlitchReported = false; |
| } |
| } else { |
| // Update the mapping between local consumed (mPosition) and server consumed (mServer) |
| (void) updateAndGetPosition_l(); |
| // Server consumed (mServer) and presented both use the same server time base, |
| // and server consumed is always >= presented. |
| // The delta between these represents the number of frames in the buffer pipeline. |
| // If this delta between these is greater than the client position, it means that |
| // actually presented is still stuck at the starting line (figuratively speaking), |
| // waiting for the first frame to go by. So we can't report a valid timestamp yet. |
| // Note: We explicitly use non-Modulo comparison here - potential wrap issue when |
| // mPosition exceeds 32 bits. |
| // TODO Remove when timestamp is updated to contain pipeline status info. |
| const int32_t pipelineDepthInFrames = (mServer - timestamp.mPosition).signedValue(); |
| if (pipelineDepthInFrames > 0 /* should be true, but we check anyways */ |
| && (uint32_t)pipelineDepthInFrames > mPosition.value()) { |
| return INVALID_OPERATION; |
| } |
| // Convert timestamp position from server time base to client time base. |
| // TODO The following code should work OK now because timestamp.mPosition is 32-bit. |
| // But if we change it to 64-bit then this could fail. |
| // Use Modulo computation here. |
| timestamp.mPosition = (mPosition - mServer + timestamp.mPosition).value(); |
| // Immediately after a call to getPosition_l(), mPosition and |
| // mServer both represent the same frame position. mPosition is |
| // in client's point of view, and mServer is in server's point of |
| // view. So the difference between them is the "fudge factor" |
| // between client and server views due to stop() and/or new |
| // IAudioTrack. And timestamp.mPosition is initially in server's |
| // point of view, so we need to apply the same fudge factor to it. |
| } |
| |
| // Prevent retrograde motion in timestamp. |
| // This is sometimes caused by erratic reports of the available space in the ALSA drivers. |
| if (status == NO_ERROR) { |
| // Fix stale time when checking timestamp right after start(). |
| // The position is at the last reported location but the time can be stale |
| // due to pause or standby or cold start latency. |
| // |
| // We keep advancing the time (but not the position) to ensure that the |
| // stale value does not confuse the application. |
| // |
| // For offload compatibility, use a default lag value here. |
| // Any time discrepancy between this update and the pause timestamp is handled |
| // by the retrograde check afterwards. |
| int64_t currentTimeNanos = audio_utils_ns_from_timespec(×tamp.mTime); |
| const int64_t lagNs = int64_t(mAfLatency * 1000000LL); |
| const int64_t limitNs = mStartNs - lagNs; |
| if (currentTimeNanos < limitNs) { |
| if (!mTimestampStaleTimeReported) { |
| ALOGD("%s(%d): stale timestamp time corrected, " |
| "currentTimeNanos: %lld < limitNs: %lld < mStartNs: %lld", |
| __func__, mPortId, |
| (long long)currentTimeNanos, (long long)limitNs, (long long)mStartNs); |
| mTimestampStaleTimeReported = true; |
| } |
| timestamp.mTime = convertNsToTimespec(limitNs); |
| currentTimeNanos = limitNs; |
| } else { |
| mTimestampStaleTimeReported = false; |
| } |
| |
| // previousTimestampValid is set to false when starting after a stop or flush. |
| if (previousTimestampValid) { |
| const int64_t previousTimeNanos = |
| audio_utils_ns_from_timespec(&mPreviousTimestamp.mTime); |
| |
| // retrograde check |
| if (currentTimeNanos < previousTimeNanos) { |
| if (!mTimestampRetrogradeTimeReported) { |
| ALOGW("%s(%d): retrograde timestamp time corrected, %lld < %lld", |
| __func__, mPortId, |
| (long long)currentTimeNanos, (long long)previousTimeNanos); |
| mTimestampRetrogradeTimeReported = true; |
| } |
| timestamp.mTime = mPreviousTimestamp.mTime; |
| } else { |
| mTimestampRetrogradeTimeReported = false; |
| } |
| |
| // Looking at signed delta will work even when the timestamps |
| // are wrapping around. |
| int32_t deltaPosition = (Modulo<uint32_t>(timestamp.mPosition) |
| - mPreviousTimestamp.mPosition).signedValue(); |
| if (deltaPosition < 0) { |
| // Only report once per position instead of spamming the log. |
| if (!mTimestampRetrogradePositionReported) { |
| ALOGW("%s(%d): retrograde timestamp position corrected, %d = %u - %u", |
| __func__, mPortId, |
| deltaPosition, |
| timestamp.mPosition, |
| mPreviousTimestamp.mPosition); |
| mTimestampRetrogradePositionReported = true; |
| } |
| } else { |
| mTimestampRetrogradePositionReported = false; |
| } |
| if (deltaPosition < 0) { |
| timestamp.mPosition = mPreviousTimestamp.mPosition; |
| deltaPosition = 0; |
| } |
| #if 0 |
| // Uncomment this to verify audio timestamp rate. |
| const int64_t deltaTime = |
| audio_utils_ns_from_timespec(×tamp.mTime) - previousTimeNanos; |
| if (deltaTime != 0) { |
| const int64_t computedSampleRate = |
| deltaPosition * (long long)NANOS_PER_SECOND / deltaTime; |
| ALOGD("%s(%d): computedSampleRate:%u sampleRate:%u", |
| __func__, mPortId, |
| (unsigned)computedSampleRate, mSampleRate); |
| } |
| #endif |
| } |
| mPreviousTimestamp = timestamp; |
| mPreviousTimestampValid = true; |
| } |
| |
| return status; |
| } |
| |
| String8 AudioTrack::getParameters(const String8& keys) |
| { |
| audio_io_handle_t output = getOutput(); |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| return AudioSystem::getParameters(output, keys); |
| } else { |
| return String8(); |
| } |
| } |
| |
| bool AudioTrack::isOffloaded() const |
| { |
| AutoMutex lock(mLock); |
| return isOffloaded_l(); |
| } |
| |
| bool AudioTrack::isDirect() const |
| { |
| AutoMutex lock(mLock); |
| return isDirect_l(); |
| } |
| |
| bool AudioTrack::isOffloadedOrDirect() const |
| { |
| AutoMutex lock(mLock); |
| return isOffloadedOrDirect_l(); |
| } |
| |
| |
| status_t AudioTrack::dump(int fd, const Vector<String16>& args __unused) const |
| { |
| String8 result; |
| |
| result.append(" AudioTrack::dump\n"); |
| result.appendFormat(" id(%d) status(%d), state(%d), session Id(%d), flags(%#x)\n", |
| mPortId, mStatus, mState, mSessionId, mFlags); |
| result.appendFormat(" stream type(%d), left - right volume(%f, %f)\n", |
| mStreamType, |
| mVolume[AUDIO_INTERLEAVE_LEFT], mVolume[AUDIO_INTERLEAVE_RIGHT]); |
| result.appendFormat(" format(%#x), channel mask(%#x), channel count(%u)\n", |
| mFormat, mChannelMask, mChannelCount); |
| result.appendFormat(" sample rate(%u), original sample rate(%u), speed(%f)\n", |
| mSampleRate, mOriginalSampleRate, mPlaybackRate.mSpeed); |
| result.appendFormat(" frame count(%zu), req. frame count(%zu)\n", |
| mFrameCount, mReqFrameCount); |
| result.appendFormat(" notif. frame count(%u), req. notif. frame count(%u)," |
| " req. notif. per buff(%u)\n", |
| mNotificationFramesAct, mNotificationFramesReq, mNotificationsPerBufferReq); |
| result.appendFormat(" latency (%d), selected device Id(%d), routed device Id(%d)\n", |
| mLatency, mSelectedDeviceId, mRoutedDeviceId); |
| result.appendFormat(" output(%d) AF latency (%u) AF frame count(%zu) AF SampleRate(%u)\n", |
| mOutput, mAfLatency, mAfFrameCount, mAfSampleRate); |
| ::write(fd, result.c_str(), result.size()); |
| return NO_ERROR; |
| } |
| |
| uint32_t AudioTrack::getUnderrunCount() const |
| { |
| AutoMutex lock(mLock); |
| return getUnderrunCount_l(); |
| } |
| |
| uint32_t AudioTrack::getUnderrunCount_l() const |
| { |
| return mProxy->getUnderrunCount() + mUnderrunCountOffset; |
| } |
| |
| uint32_t AudioTrack::getUnderrunFrames() const |
| { |
| AutoMutex lock(mLock); |
| return mProxy->getUnderrunFrames(); |
| } |
| |
| void AudioTrack::setLogSessionId(const char *logSessionId) |
| { |
| AutoMutex lock(mLock); |
| if (logSessionId == nullptr) logSessionId = ""; // an empty string is an unset session id. |
| if (mLogSessionId == logSessionId) return; |
| |
| mLogSessionId = logSessionId; |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETLOGSESSIONID) |
| .set(AMEDIAMETRICS_PROP_LOGSESSIONID, logSessionId) |
| .record(); |
| } |
| |
| void AudioTrack::setPlayerIId(int playerIId) |
| { |
| AutoMutex lock(mLock); |
| if (mPlayerIId == playerIId) return; |
| |
| mPlayerIId = playerIId; |
| triggerPortIdUpdate_l(); |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_SETPLAYERIID) |
| .set(AMEDIAMETRICS_PROP_PLAYERIID, playerIId) |
| .record(); |
| } |
| |
| void AudioTrack::triggerPortIdUpdate_l() { |
| if (mAudioManager == nullptr) { |
| // use checkService() to avoid blocking if audio service is not up yet |
| sp<IBinder> binder = |
| defaultServiceManager()->checkService(String16(kAudioServiceName)); |
| if (binder == nullptr) { |
| ALOGE("%s(%d): binding to audio service failed.", |
| __func__, |
| mPlayerIId); |
| return; |
| } |
| |
| mAudioManager = interface_cast<IAudioManager>(binder); |
| } |
| |
| // first time when the track is created we do not have a valid piid |
| if (mPlayerIId != PLAYER_PIID_INVALID) { |
| mAudioManager->playerEvent(mPlayerIId, PLAYER_UPDATE_PORT_ID, mPortId); |
| } |
| } |
| |
| status_t AudioTrack::addAudioDeviceCallback(const sp<AudioSystem::AudioDeviceCallback>& callback) |
| { |
| |
| if (callback == 0) { |
| ALOGW("%s(%d): adding NULL callback!", __func__, mPortId); |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| if (mDeviceCallback.unsafe_get() == callback.get()) { |
| ALOGW("%s(%d): adding same callback!", __func__, mPortId); |
| return INVALID_OPERATION; |
| } |
| status_t status = NO_ERROR; |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| if (mDeviceCallback != 0) { |
| ALOGW("%s(%d): callback already present!", __func__, mPortId); |
| AudioSystem::removeAudioDeviceCallback(this, mOutput, mPortId); |
| } |
| status = AudioSystem::addAudioDeviceCallback(this, mOutput, mPortId); |
| } |
| mDeviceCallback = callback; |
| return status; |
| } |
| |
| status_t AudioTrack::removeAudioDeviceCallback( |
| const sp<AudioSystem::AudioDeviceCallback>& callback) |
| { |
| if (callback == 0) { |
| ALOGW("%s(%d): removing NULL callback!", __func__, mPortId); |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| if (mDeviceCallback.unsafe_get() != callback.get()) { |
| ALOGW("%s removing different callback!", __FUNCTION__); |
| return INVALID_OPERATION; |
| } |
| mDeviceCallback.clear(); |
| if (mOutput != AUDIO_IO_HANDLE_NONE) { |
| AudioSystem::removeAudioDeviceCallback(this, mOutput, mPortId); |
| } |
| return NO_ERROR; |
| } |
| |
| |
| void AudioTrack::onAudioDeviceUpdate(audio_io_handle_t audioIo, |
| audio_port_handle_t deviceId) |
| { |
| sp<AudioSystem::AudioDeviceCallback> callback; |
| { |
| AutoMutex lock(mLock); |
| if (audioIo != mOutput) { |
| return; |
| } |
| callback = mDeviceCallback.promote(); |
| // only update device if the track is active as route changes due to other use cases are |
| // irrelevant for this client |
| if (mState == STATE_ACTIVE) { |
| mRoutedDeviceId = deviceId; |
| } |
| } |
| |
| if (callback.get() != nullptr) { |
| callback->onAudioDeviceUpdate(mOutput, mRoutedDeviceId); |
| } |
| } |
| |
| status_t AudioTrack::pendingDuration(int32_t *msec, ExtendedTimestamp::Location location) |
| { |
| if (msec == nullptr || |
| (location != ExtendedTimestamp::LOCATION_SERVER |
| && location != ExtendedTimestamp::LOCATION_KERNEL)) { |
| return BAD_VALUE; |
| } |
| AutoMutex lock(mLock); |
| // inclusive of offloaded and direct tracks. |
| // |
| // It is possible, but not enabled, to allow duration computation for non-pcm |
| // audio_has_proportional_frames() formats because currently they have |
| // the drain rate equivalent to the pcm sample rate * framesize. |
| if (!isPurePcmData_l()) { |
| return INVALID_OPERATION; |
| } |
| ExtendedTimestamp ets; |
| if (getTimestamp_l(&ets) == OK |
| && ets.mTimeNs[location] > 0) { |
| int64_t diff = ets.mPosition[ExtendedTimestamp::LOCATION_CLIENT] |
| - ets.mPosition[location]; |
| if (diff < 0) { |
| *msec = 0; |
| } else { |
| // ms is the playback time by frames |
| int64_t ms = (int64_t)((double)diff * 1000 / |
| ((double)mSampleRate * mPlaybackRate.mSpeed)); |
| // clockdiff is the timestamp age (negative) |
| int64_t clockdiff = (mState != STATE_ACTIVE) ? 0 : |
| ets.mTimeNs[location] |
| + ets.mTimebaseOffset[ExtendedTimestamp::TIMEBASE_MONOTONIC] |
| - systemTime(SYSTEM_TIME_MONOTONIC); |
| |
| //ALOGV("ms: %lld clockdiff: %lld", (long long)ms, (long long)clockdiff); |
| static const int NANOS_PER_MILLIS = 1000000; |
| *msec = (int32_t)(ms + clockdiff / NANOS_PER_MILLIS); |
| } |
| return NO_ERROR; |
| } |
| if (location != ExtendedTimestamp::LOCATION_SERVER) { |
| return INVALID_OPERATION; // LOCATION_KERNEL is not available |
| } |
| // use server position directly (offloaded and direct arrive here) |
| updateAndGetPosition_l(); |
| int32_t diff = (Modulo<uint32_t>(mFramesWritten) - mPosition).signedValue(); |
| *msec = (diff <= 0) ? 0 |
| : (int32_t)((double)diff * 1000 / ((double)mSampleRate * mPlaybackRate.mSpeed)); |
| return NO_ERROR; |
| } |
| |
| bool AudioTrack::hasStarted() |
| { |
| AutoMutex lock(mLock); |
| switch (mState) { |
| case STATE_STOPPED: |
| if (isOffloadedOrDirect_l()) { |
| // check if we have started in the past to return true. |
| return mStartFromZeroUs > 0; |
| } |
| // A normal audio track may still be draining, so |
| // check if stream has ended. This covers fasttrack position |
| // instability and start/stop without any data written. |
| if (mProxy->getStreamEndDone()) { |
| return true; |
| } |
| FALLTHROUGH_INTENDED; |
| case STATE_ACTIVE: |
| case STATE_STOPPING: |
| break; |
| case STATE_PAUSED: |
| case STATE_PAUSED_STOPPING: |
| case STATE_FLUSHED: |
| return false; // we're not active |
| default: |
| LOG_ALWAYS_FATAL("%s(%d): Invalid mState in hasStarted(): %d", __func__, mPortId, mState); |
| break; |
| } |
| |
| // wait indicates whether we need to wait for a timestamp. |
| // This is conservatively figured - if we encounter an unexpected error |
| // then we will not wait. |
| bool wait = false; |
| if (isAfTrackOffloadedOrDirect_l()) { |
| AudioTimestamp ts; |
| status_t status = getTimestamp_l(ts); |
| if (status == WOULD_BLOCK) { |
| wait = true; |
| } else if (status == OK) { |
| wait = (ts.mPosition == 0 || ts.mPosition == mStartTs.mPosition); |
| } |
| ALOGV("%s(%d): hasStarted wait:%d ts:%u start position:%lld", |
| __func__, mPortId, |
| (int)wait, |
| ts.mPosition, |
| (long long)mStartTs.mPosition); |
| } else { |
| int location = ExtendedTimestamp::LOCATION_SERVER; // for ALOG |
| ExtendedTimestamp ets; |
| status_t status = getTimestamp_l(&ets); |
| if (status == WOULD_BLOCK) { // no SERVER or KERNEL frame info in ets |
| wait = true; |
| } else if (status == OK) { |
| for (location = ExtendedTimestamp::LOCATION_KERNEL; |
| location >= ExtendedTimestamp::LOCATION_SERVER; --location) { |
| if (ets.mTimeNs[location] < 0 || mStartEts.mTimeNs[location] < 0) { |
| continue; |
| } |
| wait = ets.mPosition[location] == 0 |
| || ets.mPosition[location] == mStartEts.mPosition[location]; |
| break; |
| } |
| } |
| ALOGV("%s(%d): hasStarted wait:%d ets:%lld start position:%lld", |
| __func__, mPortId, |
| (int)wait, |
| (long long)ets.mPosition[location], |
| (long long)mStartEts.mPosition[location]); |
| } |
| return !wait; |
| } |
| |
| // ========================================================================= |
| |
| void AudioTrack::DeathNotifier::binderDied(const wp<IBinder>& who __unused) |
| { |
| sp<AudioTrack> audioTrack = mAudioTrack.promote(); |
| if (audioTrack != 0) { |
| AutoMutex lock(audioTrack->mLock); |
| audioTrack->mProxy->binderDied(); |
| } |
| } |
| |
| // ========================================================================= |
| |
| AudioTrack::AudioTrackThread::AudioTrackThread(AudioTrack& receiver) |
| : Thread(true /* bCanCallJava */) // binder recursion on restoreTrack_l() may call Java. |
| , mReceiver(receiver), mPaused(true), mPausedInt(false), mPausedNs(0LL), |
| mIgnoreNextPausedInt(false) |
| { |
| } |
| |
| AudioTrack::AudioTrackThread::~AudioTrackThread() |
| { |
| } |
| |
| bool AudioTrack::AudioTrackThread::threadLoop() |
| { |
| { |
| AutoMutex _l(mMyLock); |
| if (mPaused) { |
| // TODO check return value and handle or log |
| mMyCond.wait(mMyLock); |
| // caller will check for exitPending() |
| return true; |
| } |
| if (mIgnoreNextPausedInt) { |
| mIgnoreNextPausedInt = false; |
| mPausedInt = false; |
| } |
| if (mPausedInt) { |
| // TODO use futex instead of condition, for event flag "or" |
| if (mPausedNs > 0) { |
| // TODO check return value and handle or log |
| (void) mMyCond.waitRelative(mMyLock, mPausedNs); |
| } else { |
| // TODO check return value and handle or log |
| mMyCond.wait(mMyLock); |
| } |
| mPausedInt = false; |
| return true; |
| } |
| } |
| if (exitPending()) { |
| return false; |
| } |
| nsecs_t ns = mReceiver.processAudioBuffer(); |
| switch (ns) { |
| case 0: |
| return true; |
| case NS_INACTIVE: |
| pauseInternal(); |
| return true; |
| case NS_NEVER: |
| return false; |
| case NS_WHENEVER: |
| // Event driven: call wake() when callback notifications conditions change. |
| ns = INT64_MAX; |
| FALLTHROUGH_INTENDED; |
| default: |
| LOG_ALWAYS_FATAL_IF(ns < 0, "%s(%d): processAudioBuffer() returned %lld", |
| __func__, mReceiver.mPortId, (long long)ns); |
| pauseInternal(ns); |
| return true; |
| } |
| } |
| |
| void AudioTrack::AudioTrackThread::requestExit() |
| { |
| // must be in this order to avoid a race condition |
| Thread::requestExit(); |
| resume(); |
| } |
| |
| void AudioTrack::AudioTrackThread::pause() |
| { |
| AutoMutex _l(mMyLock); |
| mPaused = true; |
| } |
| |
| void AudioTrack::AudioTrackThread::resume() |
| { |
| AutoMutex _l(mMyLock); |
| mIgnoreNextPausedInt = true; |
| if (mPaused || mPausedInt) { |
| mPaused = false; |
| mPausedInt = false; |
| mMyCond.signal(); |
| } |
| } |
| |
| void AudioTrack::AudioTrackThread::wake() |
| { |
| AutoMutex _l(mMyLock); |
| if (!mPaused) { |
| // wake() might be called while servicing a callback - ignore the next |
| // pause time and call processAudioBuffer. |
| mIgnoreNextPausedInt = true; |
| if (mPausedInt && mPausedNs > 0) { |
| // audio track is active and internally paused with timeout. |
| mPausedInt = false; |
| mMyCond.signal(); |
| } |
| } |
| } |
| |
| void AudioTrack::AudioTrackThread::pauseInternal(nsecs_t ns) |
| { |
| AutoMutex _l(mMyLock); |
| mPausedInt = true; |
| mPausedNs = ns; |
| } |
| |
| binder::Status AudioTrack::AudioTrackCallback::onCodecFormatChanged( |
| const std::vector<uint8_t>& audioMetadata) |
| { |
| AutoMutex _l(mAudioTrackCbLock); |
| sp<media::IAudioTrackCallback> callback = mCallback.promote(); |
| if (callback.get() != nullptr) { |
| callback->onCodecFormatChanged(audioMetadata); |
| } else { |
| mCallback.clear(); |
| } |
| return binder::Status::ok(); |
| } |
| |
| void AudioTrack::AudioTrackCallback::setAudioTrackCallback( |
| const sp<media::IAudioTrackCallback> &callback) { |
| AutoMutex lock(mAudioTrackCbLock); |
| mCallback = callback; |
| } |
| |
| } // namespace android |