| /* |
| * Copyright (C) 2017 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "AAudioServiceEndpointMMAP" |
| //#define LOG_NDEBUG 0 |
| #include <utils/Log.h> |
| |
| #include <algorithm> |
| #include <assert.h> |
| #include <map> |
| #include <mutex> |
| #include <sstream> |
| #include <utils/Singleton.h> |
| #include <vector> |
| |
| |
| #include "AAudioEndpointManager.h" |
| #include "AAudioServiceEndpoint.h" |
| |
| #include "core/AudioStreamBuilder.h" |
| #include "AAudioServiceEndpoint.h" |
| #include "AAudioServiceStreamShared.h" |
| #include "AAudioServiceEndpointPlay.h" |
| #include "AAudioServiceEndpointMMAP.h" |
| |
| |
| #define AAUDIO_BUFFER_CAPACITY_MIN 4 * 512 |
| #define AAUDIO_SAMPLE_RATE_DEFAULT 48000 |
| |
| // This is an estimate of the time difference between the HW and the MMAP time. |
| // TODO Get presentation timestamps from the HAL instead of using these estimates. |
| #define OUTPUT_ESTIMATED_HARDWARE_OFFSET_NANOS (3 * AAUDIO_NANOS_PER_MILLISECOND) |
| #define INPUT_ESTIMATED_HARDWARE_OFFSET_NANOS (-1 * AAUDIO_NANOS_PER_MILLISECOND) |
| |
| using namespace android; // TODO just import names needed |
| using namespace aaudio; // TODO just import names needed |
| |
| AAudioServiceEndpointMMAP::AAudioServiceEndpointMMAP() |
| : mMmapStream(nullptr) {} |
| |
| AAudioServiceEndpointMMAP::~AAudioServiceEndpointMMAP() {} |
| |
| std::string AAudioServiceEndpointMMAP::dump() const { |
| std::stringstream result; |
| |
| result << " MMAP: framesTransferred = " << mFramesTransferred.get(); |
| result << ", HW nanos = " << mHardwareTimeOffsetNanos; |
| result << ", port handle = " << mPortHandle; |
| result << ", audio data FD = " << mAudioDataFileDescriptor; |
| result << "\n"; |
| |
| result << " HW Offset Micros: " << |
| (getHardwareTimeOffsetNanos() |
| / AAUDIO_NANOS_PER_MICROSECOND) << "\n"; |
| |
| result << AAudioServiceEndpoint::dump(); |
| return result.str(); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::open(const aaudio::AAudioStreamRequest &request) { |
| aaudio_result_t result = AAUDIO_OK; |
| const audio_attributes_t attributes = { |
| .content_type = AUDIO_CONTENT_TYPE_MUSIC, |
| .usage = AUDIO_USAGE_MEDIA, |
| .source = AUDIO_SOURCE_VOICE_RECOGNITION, |
| .flags = AUDIO_FLAG_LOW_LATENCY, |
| .tags = "" |
| }; |
| audio_config_base_t config; |
| audio_port_handle_t deviceId; |
| |
| int32_t burstMinMicros = AAudioProperty_getHardwareBurstMinMicros(); |
| int32_t burstMicros = 0; |
| |
| copyFrom(request.getConstantConfiguration()); |
| |
| mMmapClient.clientUid = request.getUserId(); |
| mMmapClient.clientPid = request.getProcessId(); |
| mMmapClient.packageName.setTo(String16("")); |
| |
| mRequestedDeviceId = deviceId = getDeviceId(); |
| |
| // Fill in config |
| aaudio_format_t aaudioFormat = getFormat(); |
| if (aaudioFormat == AAUDIO_UNSPECIFIED || aaudioFormat == AAUDIO_FORMAT_PCM_FLOAT) { |
| aaudioFormat = AAUDIO_FORMAT_PCM_I16; |
| } |
| config.format = AAudioConvert_aaudioToAndroidDataFormat(aaudioFormat); |
| |
| int32_t aaudioSampleRate = getSampleRate(); |
| if (aaudioSampleRate == AAUDIO_UNSPECIFIED) { |
| aaudioSampleRate = AAUDIO_SAMPLE_RATE_DEFAULT; |
| } |
| config.sample_rate = aaudioSampleRate; |
| |
| int32_t aaudioSamplesPerFrame = getSamplesPerFrame(); |
| |
| aaudio_direction_t direction = getDirection(); |
| if (direction == AAUDIO_DIRECTION_OUTPUT) { |
| config.channel_mask = (aaudioSamplesPerFrame == AAUDIO_UNSPECIFIED) |
| ? AUDIO_CHANNEL_OUT_STEREO |
| : audio_channel_out_mask_from_count(aaudioSamplesPerFrame); |
| mHardwareTimeOffsetNanos = OUTPUT_ESTIMATED_HARDWARE_OFFSET_NANOS; // frames at DAC later |
| |
| } else if (direction == AAUDIO_DIRECTION_INPUT) { |
| config.channel_mask = (aaudioSamplesPerFrame == AAUDIO_UNSPECIFIED) |
| ? AUDIO_CHANNEL_IN_STEREO |
| : audio_channel_in_mask_from_count(aaudioSamplesPerFrame); |
| mHardwareTimeOffsetNanos = INPUT_ESTIMATED_HARDWARE_OFFSET_NANOS; // frames at ADC earlier |
| |
| } else { |
| ALOGE("openMmapStream - invalid direction = %d", direction); |
| return AAUDIO_ERROR_ILLEGAL_ARGUMENT; |
| } |
| |
| MmapStreamInterface::stream_direction_t streamDirection = |
| (direction == AAUDIO_DIRECTION_OUTPUT) |
| ? MmapStreamInterface::DIRECTION_OUTPUT |
| : MmapStreamInterface::DIRECTION_INPUT; |
| |
| // Open HAL stream. Set mMmapStream |
| status_t status = MmapStreamInterface::openMmapStream(streamDirection, |
| &attributes, |
| &config, |
| mMmapClient, |
| &deviceId, |
| this, // callback |
| mMmapStream, |
| &mPortHandle); |
| ALOGD("AAudioServiceEndpointMMAP::open() mMapClient.uid = %d, pid = %d => portHandle = %d\n", |
| mMmapClient.clientUid, mMmapClient.clientPid, mPortHandle); |
| if (status != OK) { |
| ALOGE("openMmapStream returned status %d", status); |
| return AAUDIO_ERROR_UNAVAILABLE; |
| } |
| |
| if (deviceId == AAUDIO_UNSPECIFIED) { |
| ALOGW("AAudioServiceEndpointMMAP::open() - openMmapStream() failed to set deviceId"); |
| } |
| setDeviceId(deviceId); |
| |
| // Create MMAP/NOIRQ buffer. |
| int32_t minSizeFrames = getBufferCapacity(); |
| if (minSizeFrames <= 0) { // zero will get rejected |
| minSizeFrames = AAUDIO_BUFFER_CAPACITY_MIN; |
| } |
| status = mMmapStream->createMmapBuffer(minSizeFrames, &mMmapBufferinfo); |
| if (status != OK) { |
| ALOGE("AAudioServiceEndpointMMAP::open() - createMmapBuffer() failed with status %d %s", |
| status, strerror(-status)); |
| result = AAUDIO_ERROR_UNAVAILABLE; |
| goto error; |
| } else { |
| ALOGD("createMmapBuffer status = %d, buffer_size = %d, burst_size %d" |
| ", Sharable FD: %s", |
| status, |
| abs(mMmapBufferinfo.buffer_size_frames), |
| mMmapBufferinfo.burst_size_frames, |
| mMmapBufferinfo.buffer_size_frames < 0 ? "Yes" : "No"); |
| } |
| |
| setBufferCapacity(mMmapBufferinfo.buffer_size_frames); |
| // The audio HAL indicates if the shared memory fd can be shared outside of audioserver |
| // by returning a negative buffer size |
| if (getBufferCapacity() < 0) { |
| // Exclusive mode can be used by client or service. |
| setBufferCapacity(-getBufferCapacity()); |
| } else { |
| // Exclusive mode can only be used by the service because the FD cannot be shared. |
| uid_t audioServiceUid = getuid(); |
| if ((mMmapClient.clientUid != audioServiceUid) && |
| getSharingMode() == AAUDIO_SHARING_MODE_EXCLUSIVE) { |
| // Fallback is handled by caller but indicate what is possible in case |
| // this is used in the future |
| setSharingMode(AAUDIO_SHARING_MODE_SHARED); |
| ALOGW("AAudioServiceEndpointMMAP::open() - exclusive FD cannot be used by client"); |
| result = AAUDIO_ERROR_UNAVAILABLE; |
| goto error; |
| } |
| } |
| |
| // Get information about the stream and pass it back to the caller. |
| setSamplesPerFrame((direction == AAUDIO_DIRECTION_OUTPUT) |
| ? audio_channel_count_from_out_mask(config.channel_mask) |
| : audio_channel_count_from_in_mask(config.channel_mask)); |
| |
| // AAudio creates a copy of this FD and retains ownership of the copy. |
| // Assume that AudioFlinger will close the original shared_memory_fd. |
| mAudioDataFileDescriptor.reset(dup(mMmapBufferinfo.shared_memory_fd)); |
| if (mAudioDataFileDescriptor.get() == -1) { |
| ALOGE("AAudioServiceEndpointMMAP::open() - could not dup shared_memory_fd"); |
| result = AAUDIO_ERROR_INTERNAL; |
| goto error; |
| } |
| mFramesPerBurst = mMmapBufferinfo.burst_size_frames; |
| setFormat(AAudioConvert_androidToAAudioDataFormat(config.format)); |
| setSampleRate(config.sample_rate); |
| |
| // Scale up the burst size to meet the minimum equivalent in microseconds. |
| // This is to avoid waking the CPU too often when the HW burst is very small |
| // or at high sample rates. |
| do { |
| if (burstMicros > 0) { // skip first loop |
| mFramesPerBurst *= 2; |
| } |
| burstMicros = mFramesPerBurst * static_cast<int64_t>(1000000) / getSampleRate(); |
| } while (burstMicros < burstMinMicros); |
| |
| ALOGD("AAudioServiceEndpointMMAP::open() original burst = %d, minMicros = %d, to burst = %d\n", |
| mMmapBufferinfo.burst_size_frames, burstMinMicros, mFramesPerBurst); |
| |
| ALOGD("AAudioServiceEndpointMMAP::open() actual rate = %d, channels = %d" |
| ", deviceId = %d, capacity = %d\n", |
| getSampleRate(), getSamplesPerFrame(), deviceId, getBufferCapacity()); |
| |
| return result; |
| |
| error: |
| close(); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::close() { |
| |
| if (mMmapStream != 0) { |
| ALOGD("AAudioServiceEndpointMMAP::close() clear() endpoint"); |
| // Needs to be explicitly cleared or CTS will fail but it is not clear why. |
| mMmapStream.clear(); |
| // Apparently the above close is asynchronous. An attempt to open a new device |
| // right after a close can fail. Also some callbacks may still be in flight! |
| // FIXME Make closing synchronous. |
| AudioClock::sleepForNanos(100 * AAUDIO_NANOS_PER_MILLISECOND); |
| } |
| |
| return AAUDIO_OK; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::startStream(sp<AAudioServiceStreamBase> stream, |
| audio_port_handle_t *clientHandle) { |
| // Start the client on behalf of the AAudio service. |
| // Use the port handle that was provided by openMmapStream(). |
| return startClient(mMmapClient, &mPortHandle); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::stopStream(sp<AAudioServiceStreamBase> stream, |
| audio_port_handle_t clientHandle) { |
| mFramesTransferred.reset32(); |
| return stopClient(mPortHandle); |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::startClient(const android::AudioClient& client, |
| audio_port_handle_t *clientHandle) { |
| if (mMmapStream == nullptr) return AAUDIO_ERROR_NULL; |
| ALOGD("AAudioServiceEndpointMMAP::startClient(%p(uid=%d, pid=%d))", |
| &client, client.clientUid, client.clientPid); |
| audio_port_handle_t originalHandle = *clientHandle; |
| status_t status = mMmapStream->start(client, clientHandle); |
| aaudio_result_t result = AAudioConvert_androidToAAudioResult(status); |
| ALOGD("AAudioServiceEndpointMMAP::startClient() , %d => %d returns %d", |
| originalHandle, *clientHandle, result); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::stopClient(audio_port_handle_t clientHandle) { |
| if (mMmapStream == nullptr) return AAUDIO_ERROR_NULL; |
| aaudio_result_t result = AAudioConvert_androidToAAudioResult(mMmapStream->stop(clientHandle)); |
| ALOGD("AAudioServiceEndpointMMAP::stopClient(%d) returns %d", clientHandle, result); |
| return result; |
| } |
| |
| // Get free-running DSP or DMA hardware position from the HAL. |
| aaudio_result_t AAudioServiceEndpointMMAP::getFreeRunningPosition(int64_t *positionFrames, |
| int64_t *timeNanos) { |
| struct audio_mmap_position position; |
| if (mMmapStream == nullptr) { |
| return AAUDIO_ERROR_NULL; |
| } |
| status_t status = mMmapStream->getMmapPosition(&position); |
| ALOGV("AAudioServiceEndpointMMAP::getFreeRunningPosition() status= %d, pos = %d, nanos = %lld\n", |
| status, position.position_frames, (long long) position.time_nanoseconds); |
| aaudio_result_t result = AAudioConvert_androidToAAudioResult(status); |
| if (result == AAUDIO_ERROR_UNAVAILABLE) { |
| ALOGW("sendCurrentTimestamp(): getMmapPosition() has no position data available"); |
| } else if (result != AAUDIO_OK) { |
| ALOGE("sendCurrentTimestamp(): getMmapPosition() returned status %d", status); |
| } else { |
| // Convert 32-bit position to 64-bit position. |
| mFramesTransferred.update32(position.position_frames); |
| *positionFrames = mFramesTransferred.get(); |
| *timeNanos = position.time_nanoseconds; |
| } |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceEndpointMMAP::getTimestamp(int64_t *positionFrames, |
| int64_t *timeNanos) { |
| return 0; // TODO |
| } |
| |
| |
| void AAudioServiceEndpointMMAP::onTearDown() { |
| ALOGD("AAudioServiceEndpointMMAP::onTearDown() called"); |
| disconnectRegisteredStreams(); |
| }; |
| |
| void AAudioServiceEndpointMMAP::onVolumeChanged(audio_channel_mask_t channels, |
| android::Vector<float> values) { |
| // TODO do we really need a different volume for each channel? |
| float volume = values[0]; |
| ALOGD("AAudioServiceEndpointMMAP::onVolumeChanged() volume[0] = %f", volume); |
| std::lock_guard<std::mutex> lock(mLockStreams); |
| for(const auto stream : mRegisteredStreams) { |
| stream->onVolumeChanged(volume); |
| } |
| }; |
| |
| void AAudioServiceEndpointMMAP::onRoutingChanged(audio_port_handle_t deviceId) { |
| ALOGD("AAudioServiceEndpointMMAP::onRoutingChanged() called with %d, old = %d", |
| deviceId, getDeviceId()); |
| if (getDeviceId() != AUDIO_PORT_HANDLE_NONE && getDeviceId() != deviceId) { |
| disconnectRegisteredStreams(); |
| } |
| setDeviceId(deviceId); |
| }; |
| |
| /** |
| * Get an immutable description of the data queue from the HAL. |
| */ |
| aaudio_result_t AAudioServiceEndpointMMAP::getDownDataDescription(AudioEndpointParcelable &parcelable) |
| { |
| // Gather information on the data queue based on HAL info. |
| int32_t bytesPerFrame = calculateBytesPerFrame(); |
| int32_t capacityInBytes = getBufferCapacity() * bytesPerFrame; |
| int fdIndex = parcelable.addFileDescriptor(mAudioDataFileDescriptor, capacityInBytes); |
| parcelable.mDownDataQueueParcelable.setupMemory(fdIndex, 0, capacityInBytes); |
| parcelable.mDownDataQueueParcelable.setBytesPerFrame(bytesPerFrame); |
| parcelable.mDownDataQueueParcelable.setFramesPerBurst(mFramesPerBurst); |
| parcelable.mDownDataQueueParcelable.setCapacityInFrames(getBufferCapacity()); |
| return AAUDIO_OK; |
| } |