| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "APM_AudioPolicyManager" |
| //#define LOG_NDEBUG 0 |
| |
| //#define VERY_VERBOSE_LOGGING |
| #ifdef VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| #define AUDIO_POLICY_XML_CONFIG_FILE_PATH_MAX_LENGTH 128 |
| #define AUDIO_POLICY_XML_CONFIG_FILE_NAME "audio_policy_configuration.xml" |
| |
| #include <inttypes.h> |
| #include <math.h> |
| |
| #include <AudioPolicyManagerInterface.h> |
| #include <AudioPolicyEngineInstance.h> |
| #include <cutils/atomic.h> |
| #include <cutils/properties.h> |
| #include <utils/Log.h> |
| #include <media/AudioParameter.h> |
| #include <media/AudioPolicyHelper.h> |
| #include <soundtrigger/SoundTrigger.h> |
| #include <system/audio.h> |
| #include <audio_policy_conf.h> |
| #include "AudioPolicyManager.h" |
| #ifndef USE_XML_AUDIO_POLICY_CONF |
| #include <ConfigParsingUtils.h> |
| #include <StreamDescriptor.h> |
| #endif |
| #include <Serializer.h> |
| #include "TypeConverter.h" |
| #include <policy.h> |
| |
| namespace android { |
| |
| //FIXME: workaround for truncated touch sounds |
| // to be removed when the problem is handled by system UI |
| #define TOUCH_SOUND_FIXED_DELAY_MS 100 |
| |
| // Largest difference in dB on earpiece in call between the voice volume and another |
| // media / notification / system volume. |
| constexpr float IN_CALL_EARPIECE_HEADROOM_DB = 3.f; |
| |
| // ---------------------------------------------------------------------------- |
| // AudioPolicyInterface implementation |
| // ---------------------------------------------------------------------------- |
| |
| status_t AudioPolicyManager::setDeviceConnectionState(audio_devices_t device, |
| audio_policy_dev_state_t state, |
| const char *device_address, |
| const char *device_name) |
| { |
| return setDeviceConnectionStateInt(device, state, device_address, device_name); |
| } |
| |
| void AudioPolicyManager::broadcastDeviceConnectionState(audio_devices_t device, |
| audio_policy_dev_state_t state, |
| const String8 &device_address) |
| { |
| AudioParameter param(device_address); |
| const String8 key(state == AUDIO_POLICY_DEVICE_STATE_AVAILABLE ? |
| AudioParameter::keyStreamConnect : AudioParameter::keyStreamDisconnect); |
| param.addInt(key, device); |
| mpClientInterface->setParameters(AUDIO_IO_HANDLE_NONE, param.toString()); |
| } |
| |
| status_t AudioPolicyManager::setDeviceConnectionStateInt(audio_devices_t device, |
| audio_policy_dev_state_t state, |
| const char *device_address, |
| const char *device_name) |
| { |
| ALOGV("setDeviceConnectionStateInt() device: 0x%X, state %d, address %s name %s", |
| - device, state, device_address, device_name); |
| |
| // connect/disconnect only 1 device at a time |
| if (!audio_is_output_device(device) && !audio_is_input_device(device)) return BAD_VALUE; |
| |
| sp<DeviceDescriptor> devDesc = |
| mHwModules.getDeviceDescriptor(device, device_address, device_name); |
| |
| // handle output devices |
| if (audio_is_output_device(device)) { |
| SortedVector <audio_io_handle_t> outputs; |
| |
| ssize_t index = mAvailableOutputDevices.indexOf(devDesc); |
| |
| // save a copy of the opened output descriptors before any output is opened or closed |
| // by checkOutputsForDevice(). This will be needed by checkOutputForAllStrategies() |
| mPreviousOutputs = mOutputs; |
| switch (state) |
| { |
| // handle output device connection |
| case AUDIO_POLICY_DEVICE_STATE_AVAILABLE: { |
| if (index >= 0) { |
| ALOGW("setDeviceConnectionState() device already connected: %x", device); |
| return INVALID_OPERATION; |
| } |
| ALOGV("setDeviceConnectionState() connecting device %x", device); |
| |
| // register new device as available |
| index = mAvailableOutputDevices.add(devDesc); |
| if (index >= 0) { |
| sp<HwModule> module = mHwModules.getModuleForDevice(device); |
| if (module == 0) { |
| ALOGD("setDeviceConnectionState() could not find HW module for device %08x", |
| device); |
| mAvailableOutputDevices.remove(devDesc); |
| return INVALID_OPERATION; |
| } |
| mAvailableOutputDevices[index]->attach(module); |
| } else { |
| return NO_MEMORY; |
| } |
| |
| // Before checking outputs, broadcast connect event to allow HAL to retrieve dynamic |
| // parameters on newly connected devices (instead of opening the outputs...) |
| broadcastDeviceConnectionState(device, state, devDesc->mAddress); |
| |
| if (checkOutputsForDevice(devDesc, state, outputs, devDesc->mAddress) != NO_ERROR) { |
| mAvailableOutputDevices.remove(devDesc); |
| |
| broadcastDeviceConnectionState(device, AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| devDesc->mAddress); |
| return INVALID_OPERATION; |
| } |
| // Propagate device availability to Engine |
| mEngine->setDeviceConnectionState(devDesc, state); |
| |
| // outputs should never be empty here |
| ALOG_ASSERT(outputs.size() != 0, "setDeviceConnectionState():" |
| "checkOutputsForDevice() returned no outputs but status OK"); |
| ALOGV("setDeviceConnectionState() checkOutputsForDevice() returned %zu outputs", |
| outputs.size()); |
| |
| } break; |
| // handle output device disconnection |
| case AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE: { |
| if (index < 0) { |
| ALOGW("setDeviceConnectionState() device not connected: %x", device); |
| return INVALID_OPERATION; |
| } |
| |
| ALOGV("setDeviceConnectionState() disconnecting output device %x", device); |
| |
| // Send Disconnect to HALs |
| broadcastDeviceConnectionState(device, state, devDesc->mAddress); |
| |
| // remove device from available output devices |
| mAvailableOutputDevices.remove(devDesc); |
| |
| checkOutputsForDevice(devDesc, state, outputs, devDesc->mAddress); |
| |
| // Propagate device availability to Engine |
| mEngine->setDeviceConnectionState(devDesc, state); |
| } break; |
| |
| default: |
| ALOGE("setDeviceConnectionState() invalid state: %x", state); |
| return BAD_VALUE; |
| } |
| |
| // checkA2dpSuspend must run before checkOutputForAllStrategies so that A2DP |
| // output is suspended before any tracks are moved to it |
| checkA2dpSuspend(); |
| checkOutputForAllStrategies(); |
| // outputs must be closed after checkOutputForAllStrategies() is executed |
| if (!outputs.isEmpty()) { |
| for (size_t i = 0; i < outputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueFor(outputs[i]); |
| // close unused outputs after device disconnection or direct outputs that have been |
| // opened by checkOutputsForDevice() to query dynamic parameters |
| if ((state == AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE) || |
| (((desc->mFlags & AUDIO_OUTPUT_FLAG_DIRECT) != 0) && |
| (desc->mDirectOpenCount == 0))) { |
| closeOutput(outputs[i]); |
| } |
| } |
| // check again after closing A2DP output to reset mA2dpSuspended if needed |
| checkA2dpSuspend(); |
| } |
| |
| updateDevicesAndOutputs(); |
| if (mEngine->getPhoneState() == AUDIO_MODE_IN_CALL && hasPrimaryOutput()) { |
| audio_devices_t newDevice = getNewOutputDevice(mPrimaryOutput, false /*fromCache*/); |
| updateCallRouting(newDevice); |
| } |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if ((mEngine->getPhoneState() != AUDIO_MODE_IN_CALL) || (desc != mPrimaryOutput)) { |
| audio_devices_t newDevice = getNewOutputDevice(desc, true /*fromCache*/); |
| // do not force device change on duplicated output because if device is 0, it will |
| // also force a device 0 for the two outputs it is duplicated to which may override |
| // a valid device selection on those outputs. |
| bool force = !desc->isDuplicated() |
| && (!device_distinguishes_on_address(device) |
| // always force when disconnecting (a non-duplicated device) |
| || (state == AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE)); |
| setOutputDevice(desc, newDevice, force, 0); |
| } |
| } |
| |
| if (state == AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE) { |
| cleanUpForDevice(devDesc); |
| } |
| |
| mpClientInterface->onAudioPortListUpdate(); |
| return NO_ERROR; |
| } // end if is output device |
| |
| // handle input devices |
| if (audio_is_input_device(device)) { |
| SortedVector <audio_io_handle_t> inputs; |
| |
| ssize_t index = mAvailableInputDevices.indexOf(devDesc); |
| switch (state) |
| { |
| // handle input device connection |
| case AUDIO_POLICY_DEVICE_STATE_AVAILABLE: { |
| if (index >= 0) { |
| ALOGW("setDeviceConnectionState() device already connected: %d", device); |
| return INVALID_OPERATION; |
| } |
| sp<HwModule> module = mHwModules.getModuleForDevice(device); |
| if (module == NULL) { |
| ALOGW("setDeviceConnectionState(): could not find HW module for device %08x", |
| device); |
| return INVALID_OPERATION; |
| } |
| |
| // Before checking intputs, broadcast connect event to allow HAL to retrieve dynamic |
| // parameters on newly connected devices (instead of opening the inputs...) |
| broadcastDeviceConnectionState(device, state, devDesc->mAddress); |
| |
| if (checkInputsForDevice(devDesc, state, inputs, devDesc->mAddress) != NO_ERROR) { |
| broadcastDeviceConnectionState(device, AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| devDesc->mAddress); |
| return INVALID_OPERATION; |
| } |
| |
| index = mAvailableInputDevices.add(devDesc); |
| if (index >= 0) { |
| mAvailableInputDevices[index]->attach(module); |
| } else { |
| return NO_MEMORY; |
| } |
| |
| // Propagate device availability to Engine |
| mEngine->setDeviceConnectionState(devDesc, state); |
| } break; |
| |
| // handle input device disconnection |
| case AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE: { |
| if (index < 0) { |
| ALOGW("setDeviceConnectionState() device not connected: %d", device); |
| return INVALID_OPERATION; |
| } |
| |
| ALOGV("setDeviceConnectionState() disconnecting input device %x", device); |
| |
| // Set Disconnect to HALs |
| broadcastDeviceConnectionState(device, state, devDesc->mAddress); |
| |
| checkInputsForDevice(devDesc, state, inputs, devDesc->mAddress); |
| mAvailableInputDevices.remove(devDesc); |
| |
| // Propagate device availability to Engine |
| mEngine->setDeviceConnectionState(devDesc, state); |
| } break; |
| |
| default: |
| ALOGE("setDeviceConnectionState() invalid state: %x", state); |
| return BAD_VALUE; |
| } |
| |
| closeAllInputs(); |
| // As the input device list can impact the output device selection, update |
| // getDeviceForStrategy() cache |
| updateDevicesAndOutputs(); |
| |
| if (mEngine->getPhoneState() == AUDIO_MODE_IN_CALL && hasPrimaryOutput()) { |
| audio_devices_t newDevice = getNewOutputDevice(mPrimaryOutput, false /*fromCache*/); |
| updateCallRouting(newDevice); |
| } |
| |
| if (state == AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE) { |
| cleanUpForDevice(devDesc); |
| } |
| |
| mpClientInterface->onAudioPortListUpdate(); |
| return NO_ERROR; |
| } // end if is input device |
| |
| ALOGW("setDeviceConnectionState() invalid device: %x", device); |
| return BAD_VALUE; |
| } |
| |
| audio_policy_dev_state_t AudioPolicyManager::getDeviceConnectionState(audio_devices_t device, |
| const char *device_address) |
| { |
| sp<DeviceDescriptor> devDesc = |
| mHwModules.getDeviceDescriptor(device, device_address, "", |
| (strlen(device_address) != 0)/*matchAddress*/); |
| |
| if (devDesc == 0) { |
| ALOGW("getDeviceConnectionState() undeclared device, type %08x, address: %s", |
| device, device_address); |
| return AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE; |
| } |
| |
| DeviceVector *deviceVector; |
| |
| if (audio_is_output_device(device)) { |
| deviceVector = &mAvailableOutputDevices; |
| } else if (audio_is_input_device(device)) { |
| deviceVector = &mAvailableInputDevices; |
| } else { |
| ALOGW("getDeviceConnectionState() invalid device type %08x", device); |
| return AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE; |
| } |
| |
| return (deviceVector->getDevice(device, String8(device_address)) != 0) ? |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE : AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE; |
| } |
| |
| status_t AudioPolicyManager::handleDeviceConfigChange(audio_devices_t device, |
| const char *device_address, |
| const char *device_name) |
| { |
| status_t status; |
| |
| ALOGV("handleDeviceConfigChange(() device: 0x%X, address %s name %s", |
| device, device_address, device_name); |
| |
| // connect/disconnect only 1 device at a time |
| if (!audio_is_output_device(device) && !audio_is_input_device(device)) return BAD_VALUE; |
| |
| // Check if the device is currently connected |
| sp<DeviceDescriptor> devDesc = |
| mHwModules.getDeviceDescriptor(device, device_address, device_name); |
| ssize_t index = mAvailableOutputDevices.indexOf(devDesc); |
| if (index < 0) { |
| // Nothing to do: device is not connected |
| return NO_ERROR; |
| } |
| |
| // Toggle the device state: UNAVAILABLE -> AVAILABLE |
| // This will force reading again the device configuration |
| status = setDeviceConnectionState(device, |
| AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| device_address, device_name); |
| if (status != NO_ERROR) { |
| ALOGW("handleDeviceConfigChange() error disabling connection state: %d", |
| status); |
| return status; |
| } |
| |
| status = setDeviceConnectionState(device, |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE, |
| device_address, device_name); |
| if (status != NO_ERROR) { |
| ALOGW("handleDeviceConfigChange() error enabling connection state: %d", |
| status); |
| return status; |
| } |
| |
| return NO_ERROR; |
| } |
| |
| uint32_t AudioPolicyManager::updateCallRouting(audio_devices_t rxDevice, uint32_t delayMs) |
| { |
| bool createTxPatch = false; |
| status_t status; |
| audio_patch_handle_t afPatchHandle; |
| DeviceVector deviceList; |
| uint32_t muteWaitMs = 0; |
| |
| if(!hasPrimaryOutput() || mPrimaryOutput->device() == AUDIO_DEVICE_OUT_STUB) { |
| return muteWaitMs; |
| } |
| audio_devices_t txDevice = getDeviceAndMixForInputSource(AUDIO_SOURCE_VOICE_COMMUNICATION); |
| ALOGV("updateCallRouting device rxDevice %08x txDevice %08x", rxDevice, txDevice); |
| |
| // release existing RX patch if any |
| if (mCallRxPatch != 0) { |
| mpClientInterface->releaseAudioPatch(mCallRxPatch->mAfPatchHandle, 0); |
| mCallRxPatch.clear(); |
| } |
| // release TX patch if any |
| if (mCallTxPatch != 0) { |
| mpClientInterface->releaseAudioPatch(mCallTxPatch->mAfPatchHandle, 0); |
| mCallTxPatch.clear(); |
| } |
| |
| // If the RX device is on the primary HW module, then use legacy routing method for voice calls |
| // via setOutputDevice() on primary output. |
| // Otherwise, create two audio patches for TX and RX path. |
| if (availablePrimaryOutputDevices() & rxDevice) { |
| muteWaitMs = setOutputDevice(mPrimaryOutput, rxDevice, true, delayMs); |
| // If the TX device is also on the primary HW module, setOutputDevice() will take care |
| // of it due to legacy implementation. If not, create a patch. |
| if ((availablePrimaryInputDevices() & txDevice & ~AUDIO_DEVICE_BIT_IN) |
| == AUDIO_DEVICE_NONE) { |
| createTxPatch = true; |
| } |
| } else { // create RX path audio patch |
| struct audio_patch patch; |
| |
| patch.num_sources = 1; |
| patch.num_sinks = 1; |
| deviceList = mAvailableOutputDevices.getDevicesFromType(rxDevice); |
| ALOG_ASSERT(!deviceList.isEmpty(), |
| "updateCallRouting() selected device not in output device list"); |
| sp<DeviceDescriptor> rxSinkDeviceDesc = deviceList.itemAt(0); |
| deviceList = mAvailableInputDevices.getDevicesFromType(AUDIO_DEVICE_IN_TELEPHONY_RX); |
| ALOG_ASSERT(!deviceList.isEmpty(), |
| "updateCallRouting() no telephony RX device"); |
| sp<DeviceDescriptor> rxSourceDeviceDesc = deviceList.itemAt(0); |
| |
| rxSourceDeviceDesc->toAudioPortConfig(&patch.sources[0]); |
| rxSinkDeviceDesc->toAudioPortConfig(&patch.sinks[0]); |
| |
| // request to reuse existing output stream if one is already opened to reach the RX device |
| SortedVector<audio_io_handle_t> outputs = |
| getOutputsForDevice(rxDevice, mOutputs); |
| audio_io_handle_t output = selectOutput(outputs, |
| AUDIO_OUTPUT_FLAG_NONE, |
| AUDIO_FORMAT_INVALID); |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueFor(output); |
| ALOG_ASSERT(!outputDesc->isDuplicated(), |
| "updateCallRouting() RX device output is duplicated"); |
| outputDesc->toAudioPortConfig(&patch.sources[1]); |
| patch.sources[1].ext.mix.usecase.stream = AUDIO_STREAM_PATCH; |
| patch.num_sources = 2; |
| } |
| |
| afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| status = mpClientInterface->createAudioPatch(&patch, &afPatchHandle, delayMs); |
| ALOGW_IF(status != NO_ERROR, "updateCallRouting() error %d creating RX audio patch", |
| status); |
| if (status == NO_ERROR) { |
| mCallRxPatch = new AudioPatch(&patch, mUidCached); |
| mCallRxPatch->mAfPatchHandle = afPatchHandle; |
| mCallRxPatch->mUid = mUidCached; |
| } |
| createTxPatch = true; |
| } |
| if (createTxPatch) { // create TX path audio patch |
| struct audio_patch patch; |
| |
| patch.num_sources = 1; |
| patch.num_sinks = 1; |
| deviceList = mAvailableInputDevices.getDevicesFromType(txDevice); |
| ALOG_ASSERT(!deviceList.isEmpty(), |
| "updateCallRouting() selected device not in input device list"); |
| sp<DeviceDescriptor> txSourceDeviceDesc = deviceList.itemAt(0); |
| txSourceDeviceDesc->toAudioPortConfig(&patch.sources[0]); |
| deviceList = mAvailableOutputDevices.getDevicesFromType(AUDIO_DEVICE_OUT_TELEPHONY_TX); |
| ALOG_ASSERT(!deviceList.isEmpty(), |
| "updateCallRouting() no telephony TX device"); |
| sp<DeviceDescriptor> txSinkDeviceDesc = deviceList.itemAt(0); |
| txSinkDeviceDesc->toAudioPortConfig(&patch.sinks[0]); |
| |
| SortedVector<audio_io_handle_t> outputs = |
| getOutputsForDevice(AUDIO_DEVICE_OUT_TELEPHONY_TX, mOutputs); |
| audio_io_handle_t output = selectOutput(outputs, |
| AUDIO_OUTPUT_FLAG_NONE, |
| AUDIO_FORMAT_INVALID); |
| // request to reuse existing output stream if one is already opened to reach the TX |
| // path output device |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| sp<AudioOutputDescriptor> outputDesc = mOutputs.valueFor(output); |
| ALOG_ASSERT(!outputDesc->isDuplicated(), |
| "updateCallRouting() RX device output is duplicated"); |
| outputDesc->toAudioPortConfig(&patch.sources[1]); |
| patch.sources[1].ext.mix.usecase.stream = AUDIO_STREAM_PATCH; |
| patch.num_sources = 2; |
| } |
| |
| // terminate active capture if on the same HW module as the call TX source device |
| // FIXME: would be better to refine to only inputs whose profile connects to the |
| // call TX device but this information is not in the audio patch and logic here must be |
| // symmetric to the one in startInput() |
| Vector<sp <AudioInputDescriptor> > activeInputs = mInputs.getActiveInputs(); |
| for (size_t i = 0; i < activeInputs.size(); i++) { |
| sp<AudioInputDescriptor> activeDesc = activeInputs[i]; |
| if (activeDesc->hasSameHwModuleAs(txSourceDeviceDesc)) { |
| AudioSessionCollection activeSessions = |
| activeDesc->getAudioSessions(true /*activeOnly*/); |
| for (size_t j = 0; j < activeSessions.size(); j++) { |
| audio_session_t activeSession = activeSessions.keyAt(j); |
| stopInput(activeDesc->mIoHandle, activeSession); |
| releaseInput(activeDesc->mIoHandle, activeSession); |
| } |
| } |
| } |
| |
| afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| status = mpClientInterface->createAudioPatch(&patch, &afPatchHandle, delayMs); |
| ALOGW_IF(status != NO_ERROR, "setPhoneState() error %d creating TX audio patch", |
| status); |
| if (status == NO_ERROR) { |
| mCallTxPatch = new AudioPatch(&patch, mUidCached); |
| mCallTxPatch->mAfPatchHandle = afPatchHandle; |
| mCallTxPatch->mUid = mUidCached; |
| } |
| } |
| |
| return muteWaitMs; |
| } |
| |
| void AudioPolicyManager::setPhoneState(audio_mode_t state) |
| { |
| ALOGV("setPhoneState() state %d", state); |
| // store previous phone state for management of sonification strategy below |
| int oldState = mEngine->getPhoneState(); |
| |
| if (mEngine->setPhoneState(state) != NO_ERROR) { |
| ALOGW("setPhoneState() invalid or same state %d", state); |
| return; |
| } |
| /// Opens: can these line be executed after the switch of volume curves??? |
| // if leaving call state, handle special case of active streams |
| // pertaining to sonification strategy see handleIncallSonification() |
| if (isStateInCall(oldState)) { |
| ALOGV("setPhoneState() in call state management: new state is %d", state); |
| for (int stream = 0; stream < AUDIO_STREAM_FOR_POLICY_CNT; stream++) { |
| handleIncallSonification((audio_stream_type_t)stream, false, true); |
| } |
| |
| // force reevaluating accessibility routing when call stops |
| mpClientInterface->invalidateStream(AUDIO_STREAM_ACCESSIBILITY); |
| } |
| |
| /** |
| * Switching to or from incall state or switching between telephony and VoIP lead to force |
| * routing command. |
| */ |
| bool force = ((is_state_in_call(oldState) != is_state_in_call(state)) |
| || (is_state_in_call(state) && (state != oldState))); |
| |
| // check for device and output changes triggered by new phone state |
| checkA2dpSuspend(); |
| checkOutputForAllStrategies(); |
| updateDevicesAndOutputs(); |
| |
| int delayMs = 0; |
| if (isStateInCall(state)) { |
| nsecs_t sysTime = systemTime(); |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| // mute media and sonification strategies and delay device switch by the largest |
| // latency of any output where either strategy is active. |
| // This avoid sending the ring tone or music tail into the earpiece or headset. |
| if ((isStrategyActive(desc, STRATEGY_MEDIA, |
| SONIFICATION_HEADSET_MUSIC_DELAY, |
| sysTime) || |
| isStrategyActive(desc, STRATEGY_SONIFICATION, |
| SONIFICATION_HEADSET_MUSIC_DELAY, |
| sysTime)) && |
| (delayMs < (int)desc->latency()*2)) { |
| delayMs = desc->latency()*2; |
| } |
| setStrategyMute(STRATEGY_MEDIA, true, desc); |
| setStrategyMute(STRATEGY_MEDIA, false, desc, MUTE_TIME_MS, |
| getDeviceForStrategy(STRATEGY_MEDIA, true /*fromCache*/)); |
| setStrategyMute(STRATEGY_SONIFICATION, true, desc); |
| setStrategyMute(STRATEGY_SONIFICATION, false, desc, MUTE_TIME_MS, |
| getDeviceForStrategy(STRATEGY_SONIFICATION, true /*fromCache*/)); |
| } |
| } |
| |
| if (hasPrimaryOutput()) { |
| // Note that despite the fact that getNewOutputDevice() is called on the primary output, |
| // the device returned is not necessarily reachable via this output |
| audio_devices_t rxDevice = getNewOutputDevice(mPrimaryOutput, false /*fromCache*/); |
| // force routing command to audio hardware when ending call |
| // even if no device change is needed |
| if (isStateInCall(oldState) && rxDevice == AUDIO_DEVICE_NONE) { |
| rxDevice = mPrimaryOutput->device(); |
| } |
| |
| if (state == AUDIO_MODE_IN_CALL) { |
| updateCallRouting(rxDevice, delayMs); |
| } else if (oldState == AUDIO_MODE_IN_CALL) { |
| if (mCallRxPatch != 0) { |
| mpClientInterface->releaseAudioPatch(mCallRxPatch->mAfPatchHandle, 0); |
| mCallRxPatch.clear(); |
| } |
| if (mCallTxPatch != 0) { |
| mpClientInterface->releaseAudioPatch(mCallTxPatch->mAfPatchHandle, 0); |
| mCallTxPatch.clear(); |
| } |
| setOutputDevice(mPrimaryOutput, rxDevice, force, 0); |
| } else { |
| setOutputDevice(mPrimaryOutput, rxDevice, force, 0); |
| } |
| } |
| // if entering in call state, handle special case of active streams |
| // pertaining to sonification strategy see handleIncallSonification() |
| if (isStateInCall(state)) { |
| ALOGV("setPhoneState() in call state management: new state is %d", state); |
| for (int stream = 0; stream < AUDIO_STREAM_FOR_POLICY_CNT; stream++) { |
| handleIncallSonification((audio_stream_type_t)stream, true, true); |
| } |
| |
| // force reevaluating accessibility routing when call starts |
| mpClientInterface->invalidateStream(AUDIO_STREAM_ACCESSIBILITY); |
| } |
| |
| // Flag that ringtone volume must be limited to music volume until we exit MODE_RINGTONE |
| if (state == AUDIO_MODE_RINGTONE && |
| isStreamActive(AUDIO_STREAM_MUSIC, SONIFICATION_HEADSET_MUSIC_DELAY)) { |
| mLimitRingtoneVolume = true; |
| } else { |
| mLimitRingtoneVolume = false; |
| } |
| } |
| |
| audio_mode_t AudioPolicyManager::getPhoneState() { |
| return mEngine->getPhoneState(); |
| } |
| |
| void AudioPolicyManager::setForceUse(audio_policy_force_use_t usage, |
| audio_policy_forced_cfg_t config) |
| { |
| ALOGV("setForceUse() usage %d, config %d, mPhoneState %d", usage, config, mEngine->getPhoneState()); |
| if (config == mEngine->getForceUse(usage)) { |
| return; |
| } |
| |
| if (mEngine->setForceUse(usage, config) != NO_ERROR) { |
| ALOGW("setForceUse() could not set force cfg %d for usage %d", config, usage); |
| return; |
| } |
| bool forceVolumeReeval = (usage == AUDIO_POLICY_FORCE_FOR_COMMUNICATION) || |
| (usage == AUDIO_POLICY_FORCE_FOR_DOCK) || |
| (usage == AUDIO_POLICY_FORCE_FOR_SYSTEM); |
| |
| // check for device and output changes triggered by new force usage |
| checkA2dpSuspend(); |
| checkOutputForAllStrategies(); |
| updateDevicesAndOutputs(); |
| |
| //FIXME: workaround for truncated touch sounds |
| // to be removed when the problem is handled by system UI |
| uint32_t delayMs = 0; |
| uint32_t waitMs = 0; |
| if (usage == AUDIO_POLICY_FORCE_FOR_COMMUNICATION) { |
| delayMs = TOUCH_SOUND_FIXED_DELAY_MS; |
| } |
| if (mEngine->getPhoneState() == AUDIO_MODE_IN_CALL && hasPrimaryOutput()) { |
| audio_devices_t newDevice = getNewOutputDevice(mPrimaryOutput, true /*fromCache*/); |
| waitMs = updateCallRouting(newDevice, delayMs); |
| } |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueAt(i); |
| audio_devices_t newDevice = getNewOutputDevice(outputDesc, true /*fromCache*/); |
| if ((mEngine->getPhoneState() != AUDIO_MODE_IN_CALL) || (outputDesc != mPrimaryOutput)) { |
| waitMs = setOutputDevice(outputDesc, newDevice, (newDevice != AUDIO_DEVICE_NONE), |
| delayMs); |
| } |
| if (forceVolumeReeval && (newDevice != AUDIO_DEVICE_NONE)) { |
| applyStreamVolumes(outputDesc, newDevice, waitMs, true); |
| } |
| } |
| |
| Vector<sp <AudioInputDescriptor> > activeInputs = mInputs.getActiveInputs(); |
| for (size_t i = 0; i < activeInputs.size(); i++) { |
| sp<AudioInputDescriptor> activeDesc = activeInputs[i]; |
| audio_devices_t newDevice = getNewInputDevice(activeDesc); |
| // Force new input selection if the new device can not be reached via current input |
| if (activeDesc->mProfile->getSupportedDevices().types() & |
| (newDevice & ~AUDIO_DEVICE_BIT_IN)) { |
| setInputDevice(activeDesc->mIoHandle, newDevice); |
| } else { |
| closeInput(activeDesc->mIoHandle); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::setSystemProperty(const char* property, const char* value) |
| { |
| ALOGV("setSystemProperty() property %s, value %s", property, value); |
| } |
| |
| // Find a direct output profile compatible with the parameters passed, even if the input flags do |
| // not explicitly request a direct output |
| sp<IOProfile> AudioPolicyManager::getProfileForDirectOutput( |
| audio_devices_t device, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags) |
| { |
| // only retain flags that will drive the direct output profile selection |
| // if explicitly requested |
| static const uint32_t kRelevantFlags = |
| (AUDIO_OUTPUT_FLAG_HW_AV_SYNC | AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD | |
| AUDIO_OUTPUT_FLAG_VOIP_RX); |
| flags = |
| (audio_output_flags_t)((flags & kRelevantFlags) | AUDIO_OUTPUT_FLAG_DIRECT); |
| |
| sp<IOProfile> profile; |
| |
| for (size_t i = 0; i < mHwModules.size(); i++) { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) { |
| sp<IOProfile> curProfile = mHwModules[i]->mOutputProfiles[j]; |
| if (!curProfile->isCompatibleProfile(device, String8(""), |
| samplingRate, NULL /*updatedSamplingRate*/, |
| format, NULL /*updatedFormat*/, |
| channelMask, NULL /*updatedChannelMask*/, |
| flags)) { |
| continue; |
| } |
| // reject profiles not corresponding to a device currently available |
| if ((mAvailableOutputDevices.types() & curProfile->getSupportedDevicesType()) == 0) { |
| continue; |
| } |
| // if several profiles are compatible, give priority to one with offload capability |
| if (profile != 0 && ((curProfile->getFlags() & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) == 0)) { |
| continue; |
| } |
| profile = curProfile; |
| if ((profile->getFlags() & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) != 0) { |
| break; |
| } |
| } |
| } |
| return profile; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::getOutput(audio_stream_type_t stream, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags, |
| const audio_offload_info_t *offloadInfo) |
| { |
| routing_strategy strategy = getStrategy(stream); |
| audio_devices_t device = getDeviceForStrategy(strategy, false /*fromCache*/); |
| ALOGV("getOutput() device %d, stream %d, samplingRate %d, format %x, channelMask %x, flags %x", |
| device, stream, samplingRate, format, channelMask, flags); |
| |
| return getOutputForDevice(device, AUDIO_SESSION_ALLOCATE, stream, samplingRate, format, |
| channelMask, flags, offloadInfo); |
| } |
| |
| status_t AudioPolicyManager::getOutputForAttr(const audio_attributes_t *attr, |
| audio_io_handle_t *output, |
| audio_session_t session, |
| audio_stream_type_t *stream, |
| uid_t uid, |
| const audio_config_t *config, |
| audio_output_flags_t flags, |
| audio_port_handle_t *selectedDeviceId, |
| audio_port_handle_t *portId) |
| { |
| audio_attributes_t attributes; |
| if (attr != NULL) { |
| if (!isValidAttributes(attr)) { |
| ALOGE("getOutputForAttr() invalid attributes: usage=%d content=%d flags=0x%x tags=[%s]", |
| attr->usage, attr->content_type, attr->flags, |
| attr->tags); |
| return BAD_VALUE; |
| } |
| attributes = *attr; |
| } else { |
| if (*stream < AUDIO_STREAM_MIN || *stream >= AUDIO_STREAM_PUBLIC_CNT) { |
| ALOGE("getOutputForAttr(): invalid stream type"); |
| return BAD_VALUE; |
| } |
| stream_type_to_audio_attributes(*stream, &attributes); |
| } |
| |
| // TODO: check for existing client for this port ID |
| if (*portId == AUDIO_PORT_HANDLE_NONE) { |
| *portId = AudioPort::getNextUniqueId(); |
| } |
| |
| sp<SwAudioOutputDescriptor> desc; |
| if (mPolicyMixes.getOutputForAttr(attributes, uid, desc) == NO_ERROR) { |
| ALOG_ASSERT(desc != 0, "Invalid desc returned by getOutputForAttr"); |
| if (!audio_has_proportional_frames(config->format)) { |
| return BAD_VALUE; |
| } |
| *stream = streamTypefromAttributesInt(&attributes); |
| *output = desc->mIoHandle; |
| ALOGV("getOutputForAttr() returns output %d", *output); |
| return NO_ERROR; |
| } |
| if (attributes.usage == AUDIO_USAGE_VIRTUAL_SOURCE) { |
| ALOGW("getOutputForAttr() no policy mix found for usage AUDIO_USAGE_VIRTUAL_SOURCE"); |
| return BAD_VALUE; |
| } |
| |
| ALOGV("getOutputForAttr() usage=%d, content=%d, tag=%s flags=%08x" |
| " session %d selectedDeviceId %d", |
| attributes.usage, attributes.content_type, attributes.tags, attributes.flags, |
| session, *selectedDeviceId); |
| |
| *stream = streamTypefromAttributesInt(&attributes); |
| |
| // Explicit routing? |
| sp<DeviceDescriptor> deviceDesc; |
| if (*selectedDeviceId != AUDIO_PORT_HANDLE_NONE) { |
| for (size_t i = 0; i < mAvailableOutputDevices.size(); i++) { |
| if (mAvailableOutputDevices[i]->getId() == *selectedDeviceId) { |
| deviceDesc = mAvailableOutputDevices[i]; |
| break; |
| } |
| } |
| } |
| mOutputRoutes.addRoute(session, *stream, SessionRoute::SOURCE_TYPE_NA, deviceDesc, uid); |
| |
| routing_strategy strategy = (routing_strategy) getStrategyForAttr(&attributes); |
| audio_devices_t device = getDeviceForStrategy(strategy, false /*fromCache*/); |
| |
| if ((attributes.flags & AUDIO_FLAG_HW_AV_SYNC) != 0) { |
| flags = (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_HW_AV_SYNC); |
| } |
| |
| ALOGV("getOutputForAttr() device 0x%x, samplingRate %d, format %x, channelMask %x, flags %x", |
| device, config->sample_rate, config->format, config->channel_mask, flags); |
| |
| *output = getOutputForDevice(device, session, *stream, |
| config->sample_rate, config->format, config->channel_mask, |
| flags, &config->offload_info); |
| if (*output == AUDIO_IO_HANDLE_NONE) { |
| mOutputRoutes.removeRoute(session); |
| return INVALID_OPERATION; |
| } |
| |
| DeviceVector outputDevices = mAvailableOutputDevices.getDevicesFromType(device); |
| *selectedDeviceId = outputDevices.size() > 0 ? outputDevices.itemAt(0)->getId() |
| : AUDIO_PORT_HANDLE_NONE; |
| |
| ALOGV(" getOutputForAttr() returns output %d selectedDeviceId %d", *output, *selectedDeviceId); |
| |
| return NO_ERROR; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::getOutputForDevice( |
| audio_devices_t device, |
| audio_session_t session, |
| audio_stream_type_t stream, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_output_flags_t flags, |
| const audio_offload_info_t *offloadInfo) |
| { |
| audio_io_handle_t output = AUDIO_IO_HANDLE_NONE; |
| status_t status; |
| |
| // open a direct output if required by specified parameters |
| //force direct flag if offload flag is set: offloading implies a direct output stream |
| // and all common behaviors are driven by checking only the direct flag |
| // this should normally be set appropriately in the policy configuration file |
| if ((flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) != 0) { |
| flags = (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_DIRECT); |
| } |
| if ((flags & AUDIO_OUTPUT_FLAG_HW_AV_SYNC) != 0) { |
| flags = (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_DIRECT); |
| } |
| // only allow deep buffering for music stream type |
| if (stream != AUDIO_STREAM_MUSIC) { |
| flags = (audio_output_flags_t)(flags &~AUDIO_OUTPUT_FLAG_DEEP_BUFFER); |
| } else if (/* stream == AUDIO_STREAM_MUSIC && */ |
| flags == AUDIO_OUTPUT_FLAG_NONE && |
| property_get_bool("audio.deep_buffer.media", false /* default_value */)) { |
| // use DEEP_BUFFER as default output for music stream type |
| flags = (audio_output_flags_t)AUDIO_OUTPUT_FLAG_DEEP_BUFFER; |
| } |
| if (stream == AUDIO_STREAM_TTS) { |
| flags = AUDIO_OUTPUT_FLAG_TTS; |
| } else if (stream == AUDIO_STREAM_VOICE_CALL && |
| audio_is_linear_pcm(format)) { |
| flags = (audio_output_flags_t)(AUDIO_OUTPUT_FLAG_VOIP_RX | |
| AUDIO_OUTPUT_FLAG_DIRECT); |
| ALOGV("Set VoIP and Direct output flags for PCM format"); |
| } |
| |
| sp<IOProfile> profile; |
| |
| // skip direct output selection if the request can obviously be attached to a mixed output |
| // and not explicitly requested |
| if (((flags & AUDIO_OUTPUT_FLAG_DIRECT) == 0) && |
| audio_is_linear_pcm(format) && samplingRate <= SAMPLE_RATE_HZ_MAX && |
| audio_channel_count_from_out_mask(channelMask) <= 2) { |
| goto non_direct_output; |
| } |
| |
| // Do not allow offloading if one non offloadable effect is enabled or MasterMono is enabled. |
| // This prevents creating an offloaded track and tearing it down immediately after start |
| // when audioflinger detects there is an active non offloadable effect. |
| // FIXME: We should check the audio session here but we do not have it in this context. |
| // This may prevent offloading in rare situations where effects are left active by apps |
| // in the background. |
| |
| if (((flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) == 0) || |
| !(mEffects.isNonOffloadableEffectEnabled() || mMasterMono)) { |
| profile = getProfileForDirectOutput(device, |
| samplingRate, |
| format, |
| channelMask, |
| (audio_output_flags_t)flags); |
| } |
| |
| if (profile != 0) { |
| sp<SwAudioOutputDescriptor> outputDesc = NULL; |
| |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if (!desc->isDuplicated() && (profile == desc->mProfile)) { |
| outputDesc = desc; |
| // reuse direct output if currently open by the same client |
| // and configured with same parameters |
| if ((samplingRate == outputDesc->mSamplingRate) && |
| audio_formats_match(format, outputDesc->mFormat) && |
| (channelMask == outputDesc->mChannelMask)) { |
| if (session == outputDesc->mDirectClientSession) { |
| outputDesc->mDirectOpenCount++; |
| ALOGV("getOutput() reusing direct output %d for session %d", |
| mOutputs.keyAt(i), session); |
| return mOutputs.keyAt(i); |
| } else { |
| ALOGV("getOutput() do not reuse direct output because current client (%d) " |
| "is not the same as requesting client (%d)", |
| outputDesc->mDirectClientSession, session); |
| goto non_direct_output; |
| } |
| } |
| } |
| } |
| // close direct output if currently open and configured with different parameters |
| if (outputDesc != NULL) { |
| closeOutput(outputDesc->mIoHandle); |
| } |
| |
| // if the selected profile is offloaded and no offload info was specified, |
| // create a default one |
| audio_offload_info_t defaultOffloadInfo = AUDIO_INFO_INITIALIZER; |
| if ((profile->getFlags() & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) && !offloadInfo) { |
| flags = (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD); |
| defaultOffloadInfo.sample_rate = samplingRate; |
| defaultOffloadInfo.channel_mask = channelMask; |
| defaultOffloadInfo.format = format; |
| defaultOffloadInfo.stream_type = stream; |
| defaultOffloadInfo.bit_rate = 0; |
| defaultOffloadInfo.duration_us = -1; |
| defaultOffloadInfo.has_video = true; // conservative |
| defaultOffloadInfo.is_streaming = true; // likely |
| offloadInfo = &defaultOffloadInfo; |
| } |
| |
| outputDesc = new SwAudioOutputDescriptor(profile, mpClientInterface); |
| outputDesc->mDevice = device; |
| outputDesc->mLatency = 0; |
| outputDesc->mFlags = (audio_output_flags_t)(outputDesc->mFlags | flags); |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = samplingRate; |
| config.channel_mask = channelMask; |
| config.format = format; |
| if (offloadInfo != NULL) { |
| config.offload_info = *offloadInfo; |
| } |
| DeviceVector outputDevices = mAvailableOutputDevices.getDevicesFromType(device); |
| String8 address = outputDevices.size() > 0 ? outputDevices.itemAt(0)->mAddress |
| : String8(""); |
| status = mpClientInterface->openOutput(profile->getModuleHandle(), |
| &output, |
| &config, |
| &outputDesc->mDevice, |
| address, |
| &outputDesc->mLatency, |
| outputDesc->mFlags); |
| |
| // only accept an output with the requested parameters |
| if (status != NO_ERROR || |
| (samplingRate != 0 && samplingRate != config.sample_rate) || |
| (format != AUDIO_FORMAT_DEFAULT && !audio_formats_match(format, config.format)) || |
| (channelMask != 0 && channelMask != config.channel_mask)) { |
| ALOGV("getOutput() failed opening direct output: output %d samplingRate %d %d," |
| "format %d %d, channelMask %04x %04x", output, samplingRate, |
| outputDesc->mSamplingRate, format, outputDesc->mFormat, channelMask, |
| outputDesc->mChannelMask); |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| mpClientInterface->closeOutput(output); |
| } |
| // fall back to mixer output if possible when the direct output could not be open |
| if (audio_is_linear_pcm(format) && samplingRate <= SAMPLE_RATE_HZ_MAX) { |
| goto non_direct_output; |
| } |
| return AUDIO_IO_HANDLE_NONE; |
| } |
| outputDesc->mSamplingRate = config.sample_rate; |
| outputDesc->mChannelMask = config.channel_mask; |
| outputDesc->mFormat = config.format; |
| outputDesc->mRefCount[stream] = 0; |
| outputDesc->mStopTime[stream] = 0; |
| outputDesc->mDirectOpenCount = 1; |
| outputDesc->mDirectClientSession = session; |
| |
| addOutput(output, outputDesc); |
| mPreviousOutputs = mOutputs; |
| ALOGV("getOutput() returns new direct output %d", output); |
| mpClientInterface->onAudioPortListUpdate(); |
| return output; |
| } |
| |
| non_direct_output: |
| |
| // A request for HW A/V sync cannot fallback to a mixed output because time |
| // stamps are embedded in audio data |
| if ((flags & AUDIO_OUTPUT_FLAG_HW_AV_SYNC) != 0) { |
| return AUDIO_IO_HANDLE_NONE; |
| } |
| |
| // ignoring channel mask due to downmix capability in mixer |
| |
| // open a non direct output |
| |
| // for non direct outputs, only PCM is supported |
| if (audio_is_linear_pcm(format)) { |
| // get which output is suitable for the specified stream. The actual |
| // routing change will happen when startOutput() will be called |
| SortedVector<audio_io_handle_t> outputs = getOutputsForDevice(device, mOutputs); |
| |
| // at this stage we should ignore the DIRECT flag as no direct output could be found earlier |
| flags = (audio_output_flags_t)(flags & ~AUDIO_OUTPUT_FLAG_DIRECT); |
| output = selectOutput(outputs, flags, format); |
| } |
| ALOGW_IF((output == 0), "getOutput() could not find output for stream %d, samplingRate %d, " |
| "format %d, channels %x, flags %x", stream, samplingRate, format, channelMask, flags); |
| |
| return output; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::selectOutput(const SortedVector<audio_io_handle_t>& outputs, |
| audio_output_flags_t flags, |
| audio_format_t format) |
| { |
| // select one output among several that provide a path to a particular device or set of |
| // devices (the list was previously build by getOutputsForDevice()). |
| // The priority is as follows: |
| // 1: the output with the highest number of requested policy flags |
| // 2: the output with the bit depth the closest to the requested one |
| // 3: the primary output |
| // 4: the first output in the list |
| |
| if (outputs.size() == 0) { |
| return 0; |
| } |
| if (outputs.size() == 1) { |
| return outputs[0]; |
| } |
| |
| int maxCommonFlags = 0; |
| audio_io_handle_t outputForFlags = 0; |
| audio_io_handle_t outputForPrimary = 0; |
| audio_io_handle_t outputForFormat = 0; |
| audio_format_t bestFormat = AUDIO_FORMAT_INVALID; |
| audio_format_t bestFormatForFlags = AUDIO_FORMAT_INVALID; |
| |
| for (size_t i = 0; i < outputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueFor(outputs[i]); |
| if (!outputDesc->isDuplicated()) { |
| // if a valid format is specified, skip output if not compatible |
| if (format != AUDIO_FORMAT_INVALID) { |
| if (outputDesc->mFlags & AUDIO_OUTPUT_FLAG_DIRECT) { |
| if (!audio_formats_match(format, outputDesc->mFormat)) { |
| continue; |
| } |
| } else if (!audio_is_linear_pcm(format)) { |
| continue; |
| } |
| if (AudioPort::isBetterFormatMatch( |
| outputDesc->mFormat, bestFormat, format)) { |
| outputForFormat = outputs[i]; |
| bestFormat = outputDesc->mFormat; |
| } |
| } |
| |
| int commonFlags = popcount(outputDesc->mProfile->getFlags() & flags); |
| if (commonFlags >= maxCommonFlags) { |
| if (commonFlags == maxCommonFlags) { |
| if (AudioPort::isBetterFormatMatch( |
| outputDesc->mFormat, bestFormatForFlags, format)) { |
| outputForFlags = outputs[i]; |
| bestFormatForFlags = outputDesc->mFormat; |
| } |
| } else { |
| outputForFlags = outputs[i]; |
| maxCommonFlags = commonFlags; |
| bestFormatForFlags = outputDesc->mFormat; |
| } |
| ALOGV("selectOutput() commonFlags for output %d, %04x", outputs[i], commonFlags); |
| } |
| if (outputDesc->mProfile->getFlags() & AUDIO_OUTPUT_FLAG_PRIMARY) { |
| outputForPrimary = outputs[i]; |
| } |
| } |
| } |
| |
| if (outputForFlags != 0) { |
| return outputForFlags; |
| } |
| if (outputForFormat != 0) { |
| return outputForFormat; |
| } |
| if (outputForPrimary != 0) { |
| return outputForPrimary; |
| } |
| |
| return outputs[0]; |
| } |
| |
| status_t AudioPolicyManager::startOutput(audio_io_handle_t output, |
| audio_stream_type_t stream, |
| audio_session_t session) |
| { |
| ALOGV("startOutput() output %d, stream %d, session %d", |
| output, stream, session); |
| ssize_t index = mOutputs.indexOfKey(output); |
| if (index < 0) { |
| ALOGW("startOutput() unknown output %d", output); |
| return BAD_VALUE; |
| } |
| |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueAt(index); |
| |
| // Routing? |
| mOutputRoutes.incRouteActivity(session); |
| |
| audio_devices_t newDevice; |
| AudioMix *policyMix = NULL; |
| const char *address = NULL; |
| if (outputDesc->mPolicyMix != NULL) { |
| policyMix = outputDesc->mPolicyMix; |
| address = policyMix->mDeviceAddress.string(); |
| if ((policyMix->mRouteFlags & MIX_ROUTE_FLAG_RENDER) == MIX_ROUTE_FLAG_RENDER) { |
| newDevice = policyMix->mDeviceType; |
| } else { |
| newDevice = AUDIO_DEVICE_OUT_REMOTE_SUBMIX; |
| } |
| } else if (mOutputRoutes.hasRouteChanged(session)) { |
| newDevice = getNewOutputDevice(outputDesc, false /*fromCache*/); |
| checkStrategyRoute(getStrategy(stream), output); |
| } else { |
| newDevice = AUDIO_DEVICE_NONE; |
| } |
| |
| uint32_t delayMs = 0; |
| |
| status_t status = startSource(outputDesc, stream, newDevice, address, &delayMs); |
| |
| if (status != NO_ERROR) { |
| mOutputRoutes.decRouteActivity(session); |
| return status; |
| } |
| // Automatically enable the remote submix input when output is started on a re routing mix |
| // of type MIX_TYPE_RECORDERS |
| if (audio_is_remote_submix_device(newDevice) && policyMix != NULL && |
| policyMix->mMixType == MIX_TYPE_RECORDERS) { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_IN_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE, |
| address, |
| "remote-submix"); |
| } |
| |
| if (delayMs != 0) { |
| usleep(delayMs * 1000); |
| } |
| |
| return status; |
| } |
| |
| status_t AudioPolicyManager::startSource(const sp<AudioOutputDescriptor>& outputDesc, |
| audio_stream_type_t stream, |
| audio_devices_t device, |
| const char *address, |
| uint32_t *delayMs) |
| { |
| // cannot start playback of STREAM_TTS if any other output is being used |
| uint32_t beaconMuteLatency = 0; |
| |
| *delayMs = 0; |
| if (stream == AUDIO_STREAM_TTS) { |
| ALOGV("\t found BEACON stream"); |
| if (!mTtsOutputAvailable && mOutputs.isAnyOutputActive(AUDIO_STREAM_TTS /*streamToIgnore*/)) { |
| return INVALID_OPERATION; |
| } else { |
| beaconMuteLatency = handleEventForBeacon(STARTING_BEACON); |
| } |
| } else { |
| // some playback other than beacon starts |
| beaconMuteLatency = handleEventForBeacon(STARTING_OUTPUT); |
| } |
| |
| // force device change if the output is inactive and no audio patch is already present. |
| // check active before incrementing usage count |
| bool force = !outputDesc->isActive() && |
| (outputDesc->getPatchHandle() == AUDIO_PATCH_HANDLE_NONE); |
| |
| // increment usage count for this stream on the requested output: |
| // NOTE that the usage count is the same for duplicated output and hardware output which is |
| // necessary for a correct control of hardware output routing by startOutput() and stopOutput() |
| outputDesc->changeRefCount(stream, 1); |
| |
| if (stream == AUDIO_STREAM_MUSIC) { |
| selectOutputForMusicEffects(); |
| } |
| |
| if (outputDesc->mRefCount[stream] == 1 || device != AUDIO_DEVICE_NONE) { |
| // starting an output being rerouted? |
| if (device == AUDIO_DEVICE_NONE) { |
| device = getNewOutputDevice(outputDesc, false /*fromCache*/); |
| } |
| |
| routing_strategy strategy = getStrategy(stream); |
| bool shouldWait = (strategy == STRATEGY_SONIFICATION) || |
| (strategy == STRATEGY_SONIFICATION_RESPECTFUL) || |
| (beaconMuteLatency > 0); |
| uint32_t waitMs = beaconMuteLatency; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<AudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if (desc != outputDesc) { |
| // force a device change if any other output is: |
| // - managed by the same hw module |
| // - has a current device selection that differs from selected device. |
| // - supports currently selected device |
| // - has an active audio patch |
| // In this case, the audio HAL must receive the new device selection so that it can |
| // change the device currently selected by the other active output. |
| if (outputDesc->sharesHwModuleWith(desc) && |
| desc->device() != device && |
| desc->supportedDevices() & device && |
| desc->getPatchHandle() != AUDIO_PATCH_HANDLE_NONE) { |
| force = true; |
| } |
| // wait for audio on other active outputs to be presented when starting |
| // a notification so that audio focus effect can propagate, or that a mute/unmute |
| // event occurred for beacon |
| uint32_t latency = desc->latency(); |
| if (shouldWait && desc->isActive(latency * 2) && (waitMs < latency)) { |
| waitMs = latency; |
| } |
| } |
| } |
| uint32_t muteWaitMs = setOutputDevice(outputDesc, device, force, 0, NULL, address); |
| |
| // handle special case for sonification while in call |
| if (isInCall()) { |
| handleIncallSonification(stream, true, false); |
| } |
| |
| // apply volume rules for current stream and device if necessary |
| checkAndSetVolume(stream, |
| mVolumeCurves->getVolumeIndex(stream, outputDesc->device()), |
| outputDesc, |
| outputDesc->device()); |
| |
| // update the outputs if starting an output with a stream that can affect notification |
| // routing |
| handleNotificationRoutingForStream(stream); |
| |
| // force reevaluating accessibility routing when ringtone or alarm starts |
| if (strategy == STRATEGY_SONIFICATION) { |
| mpClientInterface->invalidateStream(AUDIO_STREAM_ACCESSIBILITY); |
| } |
| |
| if (waitMs > muteWaitMs) { |
| *delayMs = waitMs - muteWaitMs; |
| } |
| } |
| |
| return NO_ERROR; |
| } |
| |
| |
| status_t AudioPolicyManager::stopOutput(audio_io_handle_t output, |
| audio_stream_type_t stream, |
| audio_session_t session) |
| { |
| ALOGV("stopOutput() output %d, stream %d, session %d", output, stream, session); |
| ssize_t index = mOutputs.indexOfKey(output); |
| if (index < 0) { |
| ALOGW("stopOutput() unknown output %d", output); |
| return BAD_VALUE; |
| } |
| |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueAt(index); |
| |
| if (outputDesc->mRefCount[stream] == 1) { |
| // Automatically disable the remote submix input when output is stopped on a |
| // re routing mix of type MIX_TYPE_RECORDERS |
| if (audio_is_remote_submix_device(outputDesc->mDevice) && |
| outputDesc->mPolicyMix != NULL && |
| outputDesc->mPolicyMix->mMixType == MIX_TYPE_RECORDERS) { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_IN_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| outputDesc->mPolicyMix->mDeviceAddress, |
| "remote-submix"); |
| } |
| } |
| |
| // Routing? |
| bool forceDeviceUpdate = false; |
| if (outputDesc->mRefCount[stream] > 0) { |
| int activityCount = mOutputRoutes.decRouteActivity(session); |
| forceDeviceUpdate = (mOutputRoutes.hasRoute(session) && (activityCount == 0)); |
| |
| if (forceDeviceUpdate) { |
| checkStrategyRoute(getStrategy(stream), AUDIO_IO_HANDLE_NONE); |
| } |
| } |
| |
| return stopSource(outputDesc, stream, forceDeviceUpdate); |
| } |
| |
| status_t AudioPolicyManager::stopSource(const sp<AudioOutputDescriptor>& outputDesc, |
| audio_stream_type_t stream, |
| bool forceDeviceUpdate) |
| { |
| // always handle stream stop, check which stream type is stopping |
| handleEventForBeacon(stream == AUDIO_STREAM_TTS ? STOPPING_BEACON : STOPPING_OUTPUT); |
| |
| // handle special case for sonification while in call |
| if (isInCall()) { |
| handleIncallSonification(stream, false, false); |
| } |
| |
| if (outputDesc->mRefCount[stream] > 0) { |
| // decrement usage count of this stream on the output |
| outputDesc->changeRefCount(stream, -1); |
| |
| // store time at which the stream was stopped - see isStreamActive() |
| if (outputDesc->mRefCount[stream] == 0 || forceDeviceUpdate) { |
| outputDesc->mStopTime[stream] = systemTime(); |
| audio_devices_t newDevice = getNewOutputDevice(outputDesc, false /*fromCache*/); |
| // delay the device switch by twice the latency because stopOutput() is executed when |
| // the track stop() command is received and at that time the audio track buffer can |
| // still contain data that needs to be drained. The latency only covers the audio HAL |
| // and kernel buffers. Also the latency does not always include additional delay in the |
| // audio path (audio DSP, CODEC ...) |
| setOutputDevice(outputDesc, newDevice, false, outputDesc->latency()*2); |
| |
| // force restoring the device selection on other active outputs if it differs from the |
| // one being selected for this output |
| uint32_t delayMs = outputDesc->latency()*2; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<AudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if (desc != outputDesc && |
| desc->isActive() && |
| outputDesc->sharesHwModuleWith(desc) && |
| (newDevice != desc->device())) { |
| audio_devices_t newDevice2 = getNewOutputDevice(desc, false /*fromCache*/); |
| bool force = desc->device() != newDevice2; |
| setOutputDevice(desc, |
| newDevice2, |
| force, |
| delayMs); |
| // re-apply device specific volume if not done by setOutputDevice() |
| if (!force) { |
| applyStreamVolumes(desc, newDevice2, delayMs); |
| } |
| } |
| } |
| // update the outputs if stopping one with a stream that can affect notification routing |
| handleNotificationRoutingForStream(stream); |
| } |
| if (stream == AUDIO_STREAM_MUSIC) { |
| selectOutputForMusicEffects(); |
| } |
| return NO_ERROR; |
| } else { |
| ALOGW("stopOutput() refcount is already 0"); |
| return INVALID_OPERATION; |
| } |
| } |
| |
| void AudioPolicyManager::releaseOutput(audio_io_handle_t output, |
| audio_stream_type_t stream __unused, |
| audio_session_t session __unused) |
| { |
| ALOGV("releaseOutput() %d", output); |
| ssize_t index = mOutputs.indexOfKey(output); |
| if (index < 0) { |
| ALOGW("releaseOutput() releasing unknown output %d", output); |
| return; |
| } |
| |
| // Routing |
| mOutputRoutes.removeRoute(session); |
| |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(index); |
| if (desc->mFlags & AUDIO_OUTPUT_FLAG_DIRECT) { |
| if (desc->mDirectOpenCount <= 0) { |
| ALOGW("releaseOutput() invalid open count %d for output %d", |
| desc->mDirectOpenCount, output); |
| return; |
| } |
| if (--desc->mDirectOpenCount == 0) { |
| closeOutput(output); |
| mpClientInterface->onAudioPortListUpdate(); |
| } |
| } |
| } |
| |
| |
| status_t AudioPolicyManager::getInputForAttr(const audio_attributes_t *attr, |
| audio_io_handle_t *input, |
| audio_session_t session, |
| uid_t uid, |
| const audio_config_base_t *config, |
| audio_input_flags_t flags, |
| audio_port_handle_t *selectedDeviceId, |
| input_type_t *inputType, |
| audio_port_handle_t *portId) |
| { |
| ALOGV("getInputForAttr() source %d, samplingRate %d, format %d, channelMask %x," |
| "session %d, flags %#x", |
| attr->source, config->sample_rate, config->format, config->channel_mask, session, flags); |
| |
| status_t status = NO_ERROR; |
| // handle legacy remote submix case where the address was not always specified |
| String8 address = String8(""); |
| audio_source_t halInputSource; |
| audio_source_t inputSource = attr->source; |
| AudioMix *policyMix = NULL; |
| DeviceVector inputDevices; |
| |
| // Explicit routing? |
| sp<DeviceDescriptor> deviceDesc; |
| if (*selectedDeviceId != AUDIO_PORT_HANDLE_NONE) { |
| for (size_t i = 0; i < mAvailableInputDevices.size(); i++) { |
| if (mAvailableInputDevices[i]->getId() == *selectedDeviceId) { |
| deviceDesc = mAvailableInputDevices[i]; |
| break; |
| } |
| } |
| } |
| mInputRoutes.addRoute(session, SessionRoute::STREAM_TYPE_NA, inputSource, deviceDesc, uid); |
| |
| // special case for mmap capture: if an input IO handle is specified, we reuse this input if |
| // possible |
| if ((flags & AUDIO_INPUT_FLAG_MMAP_NOIRQ) == AUDIO_INPUT_FLAG_MMAP_NOIRQ && |
| *input != AUDIO_IO_HANDLE_NONE) { |
| ssize_t index = mInputs.indexOfKey(*input); |
| if (index < 0) { |
| ALOGW("getInputForAttr() unknown MMAP input %d", *input); |
| status = BAD_VALUE; |
| goto error; |
| } |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(index); |
| sp<AudioSession> audioSession = inputDesc->getAudioSession(session); |
| if (audioSession == 0) { |
| ALOGW("getInputForAttr() unknown session %d on input %d", session, *input); |
| status = BAD_VALUE; |
| goto error; |
| } |
| // For MMAP mode, the first call to getInputForAttr() is made on behalf of audioflinger. |
| // The second call is for the first active client and sets the UID. Any further call |
| // corresponds to a new client and is only permitted from the same UId. |
| if (audioSession->openCount() == 1) { |
| audioSession->setUid(uid); |
| } else if (audioSession->uid() != uid) { |
| ALOGW("getInputForAttr() bad uid %d for session %d uid %d", |
| uid, session, audioSession->uid()); |
| status = INVALID_OPERATION; |
| goto error; |
| } |
| audioSession->changeOpenCount(1); |
| *inputType = API_INPUT_LEGACY; |
| if (*portId == AUDIO_PORT_HANDLE_NONE) { |
| *portId = AudioPort::getNextUniqueId(); |
| } |
| inputDevices = mAvailableInputDevices.getDevicesFromType(inputDesc->mDevice); |
| *selectedDeviceId = inputDevices.size() > 0 ? inputDevices.itemAt(0)->getId() |
| : AUDIO_PORT_HANDLE_NONE; |
| ALOGI("%s reusing MMAP input %d for session %d", __FUNCTION__, *input, session); |
| |
| return NO_ERROR; |
| } |
| |
| *input = AUDIO_IO_HANDLE_NONE; |
| *inputType = API_INPUT_INVALID; |
| |
| if (inputSource == AUDIO_SOURCE_DEFAULT) { |
| inputSource = AUDIO_SOURCE_MIC; |
| } |
| halInputSource = inputSource; |
| |
| // TODO: check for existing client for this port ID |
| if (*portId == AUDIO_PORT_HANDLE_NONE) { |
| *portId = AudioPort::getNextUniqueId(); |
| } |
| |
| audio_devices_t device; |
| |
| if (inputSource == AUDIO_SOURCE_REMOTE_SUBMIX && |
| strncmp(attr->tags, "addr=", strlen("addr=")) == 0) { |
| status = mPolicyMixes.getInputMixForAttr(*attr, &policyMix); |
| if (status != NO_ERROR) { |
| goto error; |
| } |
| *inputType = API_INPUT_MIX_EXT_POLICY_REROUTE; |
| device = AUDIO_DEVICE_IN_REMOTE_SUBMIX; |
| address = String8(attr->tags + strlen("addr=")); |
| } else { |
| device = getDeviceAndMixForInputSource(inputSource, &policyMix); |
| if (device == AUDIO_DEVICE_NONE) { |
| ALOGW("getInputForAttr() could not find device for source %d", inputSource); |
| status = BAD_VALUE; |
| goto error; |
| } |
| if (policyMix != NULL) { |
| address = policyMix->mDeviceAddress; |
| if (policyMix->mMixType == MIX_TYPE_RECORDERS) { |
| // there is an external policy, but this input is attached to a mix of recorders, |
| // meaning it receives audio injected into the framework, so the recorder doesn't |
| // know about it and is therefore considered "legacy" |
| *inputType = API_INPUT_LEGACY; |
| } else { |
| // recording a mix of players defined by an external policy, we're rerouting for |
| // an external policy |
| *inputType = API_INPUT_MIX_EXT_POLICY_REROUTE; |
| } |
| } else if (audio_is_remote_submix_device(device)) { |
| address = String8("0"); |
| *inputType = API_INPUT_MIX_CAPTURE; |
| } else if (device == AUDIO_DEVICE_IN_TELEPHONY_RX) { |
| *inputType = API_INPUT_TELEPHONY_RX; |
| } else { |
| *inputType = API_INPUT_LEGACY; |
| } |
| |
| } |
| |
| *input = getInputForDevice(device, address, session, uid, inputSource, |
| config->sample_rate, config->format, config->channel_mask, flags, |
| policyMix); |
| if (*input == AUDIO_IO_HANDLE_NONE) { |
| status = INVALID_OPERATION; |
| goto error; |
| } |
| |
| inputDevices = mAvailableInputDevices.getDevicesFromType(device); |
| *selectedDeviceId = inputDevices.size() > 0 ? inputDevices.itemAt(0)->getId() |
| : AUDIO_PORT_HANDLE_NONE; |
| |
| ALOGV("getInputForAttr() returns input %d type %d selectedDeviceId %d", |
| *input, *inputType, *selectedDeviceId); |
| |
| return NO_ERROR; |
| |
| error: |
| mInputRoutes.removeRoute(session); |
| return status; |
| } |
| |
| |
| audio_io_handle_t AudioPolicyManager::getInputForDevice(audio_devices_t device, |
| String8 address, |
| audio_session_t session, |
| uid_t uid, |
| audio_source_t inputSource, |
| uint32_t samplingRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| audio_input_flags_t flags, |
| AudioMix *policyMix) |
| { |
| audio_io_handle_t input = AUDIO_IO_HANDLE_NONE; |
| audio_source_t halInputSource = inputSource; |
| bool isSoundTrigger = false; |
| |
| if (inputSource == AUDIO_SOURCE_HOTWORD) { |
| ssize_t index = mSoundTriggerSessions.indexOfKey(session); |
| if (index >= 0) { |
| input = mSoundTriggerSessions.valueFor(session); |
| isSoundTrigger = true; |
| flags = (audio_input_flags_t)(flags | AUDIO_INPUT_FLAG_HW_HOTWORD); |
| ALOGV("SoundTrigger capture on session %d input %d", session, input); |
| } else { |
| halInputSource = AUDIO_SOURCE_VOICE_RECOGNITION; |
| } |
| } else if (inputSource == AUDIO_SOURCE_VOICE_COMMUNICATION && |
| audio_is_linear_pcm(format)) { |
| flags = (audio_input_flags_t)(flags | AUDIO_INPUT_FLAG_VOIP_TX); |
| } |
| |
| // find a compatible input profile (not necessarily identical in parameters) |
| sp<IOProfile> profile; |
| // samplingRate and flags may be updated by getInputProfile |
| uint32_t profileSamplingRate = (samplingRate == 0) ? SAMPLE_RATE_HZ_DEFAULT : samplingRate; |
| audio_format_t profileFormat = format; |
| audio_channel_mask_t profileChannelMask = channelMask; |
| audio_input_flags_t profileFlags = flags; |
| for (;;) { |
| profile = getInputProfile(device, address, |
| profileSamplingRate, profileFormat, profileChannelMask, |
| profileFlags); |
| if (profile != 0) { |
| break; // success |
| } else if (profileFlags & AUDIO_INPUT_FLAG_RAW) { |
| profileFlags = (audio_input_flags_t) (profileFlags & ~AUDIO_INPUT_FLAG_RAW); // retry |
| } else if (profileFlags != AUDIO_INPUT_FLAG_NONE) { |
| profileFlags = AUDIO_INPUT_FLAG_NONE; // retry |
| } else { // fail |
| ALOGW("getInputForDevice() could not find profile for device 0x%X, " |
| "samplingRate %u, format %#x, channelMask 0x%X, flags %#x", |
| device, samplingRate, format, channelMask, flags); |
| return input; |
| } |
| } |
| // Pick input sampling rate if not specified by client |
| if (samplingRate == 0) { |
| samplingRate = profileSamplingRate; |
| } |
| |
| if (profile->getModuleHandle() == 0) { |
| ALOGE("getInputForAttr(): HW module %s not opened", profile->getModuleName()); |
| return input; |
| } |
| |
| sp<AudioSession> audioSession = new AudioSession(session, |
| inputSource, |
| format, |
| samplingRate, |
| channelMask, |
| flags, |
| uid, |
| isSoundTrigger, |
| policyMix, mpClientInterface); |
| |
| // FIXME: disable concurrent capture until UI is ready |
| #if 0 |
| // reuse an open input if possible |
| sp<AudioInputDescriptor> reusedInputDesc; |
| for (size_t i = 0; i < mInputs.size(); i++) { |
| sp<AudioInputDescriptor> desc = mInputs.valueAt(i); |
| // reuse input if: |
| // - it shares the same profile |
| // AND |
| // - it is not a reroute submix input |
| // AND |
| // - it is: not used for sound trigger |
| // OR |
| // used for sound trigger and all clients use the same session ID |
| // |
| if ((profile == desc->mProfile) && |
| (isSoundTrigger == desc->isSoundTrigger()) && |
| !is_virtual_input_device(device)) { |
| |
| sp<AudioSession> as = desc->getAudioSession(session); |
| if (as != 0) { |
| // do not allow unmatching properties on same session |
| if (as->matches(audioSession)) { |
| as->changeOpenCount(1); |
| } else { |
| ALOGW("getInputForDevice() record with different attributes" |
| " exists for session %d", session); |
| continue; |
| } |
| } else if (isSoundTrigger) { |
| continue; |
| } |
| |
| // Reuse the already opened input stream on this profile if: |
| // - the new capture source is background OR |
| // - the path requested configurations match OR |
| // - the new source priority is less than the highest source priority on this input |
| // If the input stream cannot be reused, close it before opening a new stream |
| // on the same profile for the new client so that the requested path configuration |
| // can be selected. |
| if (!isConcurrentSource(inputSource) && |
| ((desc->mSamplingRate != samplingRate || |
| desc->mChannelMask != channelMask || |
| !audio_formats_match(desc->mFormat, format)) && |
| (source_priority(desc->getHighestPrioritySource(false /*activeOnly*/)) < |
| source_priority(inputSource)))) { |
| reusedInputDesc = desc; |
| continue; |
| } else { |
| desc->addAudioSession(session, audioSession); |
| ALOGV("%s: reusing input %d", __FUNCTION__, mInputs.keyAt(i)); |
| return mInputs.keyAt(i); |
| } |
| } |
| } |
| |
| if (reusedInputDesc != 0) { |
| AudioSessionCollection sessions = reusedInputDesc->getAudioSessions(false /*activeOnly*/); |
| for (size_t j = 0; j < sessions.size(); j++) { |
| audio_session_t currentSession = sessions.keyAt(j); |
| stopInput(reusedInputDesc->mIoHandle, currentSession); |
| releaseInput(reusedInputDesc->mIoHandle, currentSession); |
| } |
| } |
| #endif |
| |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = profileSamplingRate; |
| config.channel_mask = profileChannelMask; |
| config.format = profileFormat; |
| |
| if (address == "") { |
| DeviceVector inputDevices = mAvailableInputDevices.getDevicesFromType(device); |
| // the inputs vector must be of size 1, but we don't want to crash here |
| address = inputDevices.size() > 0 ? inputDevices.itemAt(0)->mAddress : String8(""); |
| } |
| |
| status_t status = mpClientInterface->openInput(profile->getModuleHandle(), |
| &input, |
| &config, |
| &device, |
| address, |
| halInputSource, |
| profileFlags); |
| |
| // only accept input with the exact requested set of parameters |
| if (status != NO_ERROR || input == AUDIO_IO_HANDLE_NONE || |
| (profileSamplingRate != config.sample_rate) || |
| !audio_formats_match(profileFormat, config.format) || |
| (profileChannelMask != config.channel_mask)) { |
| ALOGW("getInputForAttr() failed opening input: samplingRate %d" |
| ", format %d, channelMask %x", |
| samplingRate, format, channelMask); |
| if (input != AUDIO_IO_HANDLE_NONE) { |
| mpClientInterface->closeInput(input); |
| } |
| return AUDIO_IO_HANDLE_NONE; |
| } |
| |
| sp<AudioInputDescriptor> inputDesc = new AudioInputDescriptor(profile); |
| inputDesc->mSamplingRate = profileSamplingRate; |
| inputDesc->mFormat = profileFormat; |
| inputDesc->mChannelMask = profileChannelMask; |
| inputDesc->mDevice = device; |
| inputDesc->mPolicyMix = policyMix; |
| inputDesc->addAudioSession(session, audioSession); |
| |
| addInput(input, inputDesc); |
| mpClientInterface->onAudioPortListUpdate(); |
| |
| return input; |
| } |
| |
| //static |
| bool AudioPolicyManager::isConcurrentSource(audio_source_t source) |
| { |
| return (source == AUDIO_SOURCE_HOTWORD) || |
| (source == AUDIO_SOURCE_VOICE_RECOGNITION) || |
| (source == AUDIO_SOURCE_FM_TUNER); |
| } |
| |
| bool AudioPolicyManager::isConcurentCaptureAllowed(const sp<AudioInputDescriptor>& inputDesc, |
| const sp<AudioSession>& audioSession) |
| { |
| // Do not allow capture if an active voice call is using a software patch and |
| // the call TX source device is on the same HW module. |
| // FIXME: would be better to refine to only inputs whose profile connects to the |
| // call TX device but this information is not in the audio patch |
| if (mCallTxPatch != 0 && |
| inputDesc->getModuleHandle() == mCallTxPatch->mPatch.sources[0].ext.device.hw_module) { |
| return false; |
| } |
| |
| // starting concurrent capture is enabled if: |
| // 1) capturing for re-routing |
| // 2) capturing for HOTWORD source |
| // 3) capturing for FM TUNER source |
| // 3) All other active captures are either for re-routing or HOTWORD |
| |
| if (is_virtual_input_device(inputDesc->mDevice) || |
| isConcurrentSource(audioSession->inputSource())) { |
| return true; |
| } |
| |
| Vector< sp<AudioInputDescriptor> > activeInputs = mInputs.getActiveInputs(); |
| for (size_t i = 0; i < activeInputs.size(); i++) { |
| sp<AudioInputDescriptor> activeInput = activeInputs[i]; |
| if (!isConcurrentSource(activeInput->inputSource(true)) && |
| !is_virtual_input_device(activeInput->mDevice)) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| // FIXME: remove when concurrent capture is ready. This is a hack to work around bug b/63083537. |
| bool AudioPolicyManager::soundTriggerSupportsConcurrentCapture() { |
| if (!mHasComputedSoundTriggerSupportsConcurrentCapture) { |
| bool soundTriggerSupportsConcurrentCapture = false; |
| unsigned int numModules = 0; |
| struct sound_trigger_module_descriptor* nModules = NULL; |
| |
| status_t status = SoundTrigger::listModules(nModules, &numModules); |
| if (status == NO_ERROR && numModules != 0) { |
| nModules = (struct sound_trigger_module_descriptor*) calloc( |
| numModules, sizeof(struct sound_trigger_module_descriptor)); |
| if (nModules == NULL) { |
| // We failed to malloc the buffer, so just say no for now, and hope that we have more |
| // ram the next time this function is called. |
| ALOGE("Failed to allocate buffer for module descriptors"); |
| return false; |
| } |
| |
| status = SoundTrigger::listModules(nModules, &numModules); |
| if (status == NO_ERROR) { |
| soundTriggerSupportsConcurrentCapture = true; |
| for (size_t i = 0; i < numModules; ++i) { |
| soundTriggerSupportsConcurrentCapture &= |
| nModules[i].properties.concurrent_capture; |
| } |
| } |
| free(nModules); |
| } |
| mSoundTriggerSupportsConcurrentCapture = soundTriggerSupportsConcurrentCapture; |
| mHasComputedSoundTriggerSupportsConcurrentCapture = true; |
| } |
| return mSoundTriggerSupportsConcurrentCapture; |
| } |
| |
| |
| status_t AudioPolicyManager::startInput(audio_io_handle_t input, |
| audio_session_t session, |
| concurrency_type__mask_t *concurrency) |
| { |
| ALOGV("startInput() input %d", input); |
| *concurrency = API_INPUT_CONCURRENCY_NONE; |
| ssize_t index = mInputs.indexOfKey(input); |
| if (index < 0) { |
| ALOGW("startInput() unknown input %d", input); |
| return BAD_VALUE; |
| } |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(index); |
| |
| sp<AudioSession> audioSession = inputDesc->getAudioSession(session); |
| if (audioSession == 0) { |
| ALOGW("startInput() unknown session %d on input %d", session, input); |
| return BAD_VALUE; |
| } |
| |
| // FIXME: disable concurrent capture until UI is ready |
| #if 0 |
| if (!isConcurentCaptureAllowed(inputDesc, audioSession)) { |
| ALOGW("startInput(%d) failed: other input already started", input); |
| return INVALID_OPERATION; |
| } |
| |
| if (isInCall()) { |
| *concurrency |= API_INPUT_CONCURRENCY_CALL; |
| } |
| if (mInputs.activeInputsCountOnDevices() != 0) { |
| *concurrency |= API_INPUT_CONCURRENCY_CAPTURE; |
| } |
| #else |
| if (!is_virtual_input_device(inputDesc->mDevice)) { |
| if (mCallTxPatch != 0 && |
| inputDesc->getModuleHandle() == mCallTxPatch->mPatch.sources[0].ext.device.hw_module) { |
| ALOGW("startInput(%d) failed: call in progress", input); |
| return INVALID_OPERATION; |
| } |
| |
| Vector< sp<AudioInputDescriptor> > activeInputs = mInputs.getActiveInputs(); |
| for (size_t i = 0; i < activeInputs.size(); i++) { |
| sp<AudioInputDescriptor> activeDesc = activeInputs[i]; |
| |
| if (is_virtual_input_device(activeDesc->mDevice)) { |
| continue; |
| } |
| |
| if ((audioSession->flags() & AUDIO_INPUT_FLAG_MMAP_NOIRQ) != 0 && |
| activeDesc->getId() == inputDesc->getId()) { |
| continue; |
| } |
| |
| audio_source_t activeSource = activeDesc->inputSource(true); |
| if (audioSession->inputSource() == AUDIO_SOURCE_HOTWORD) { |
| if (activeSource == AUDIO_SOURCE_HOTWORD) { |
| if (activeDesc->hasPreemptedSession(session)) { |
| ALOGW("startInput(%d) failed for HOTWORD: " |
| "other input %d already started for HOTWORD", |
| input, activeDesc->mIoHandle); |
| return INVALID_OPERATION; |
| } |
| } else { |
| ALOGV("startInput(%d) failed for HOTWORD: other input %d already started", |
| input, activeDesc->mIoHandle); |
| return INVALID_OPERATION; |
| } |
| } else { |
| if (activeSource != AUDIO_SOURCE_HOTWORD) { |
| ALOGW("startInput(%d) failed: other input %d already started", |
| input, activeDesc->mIoHandle); |
| return INVALID_OPERATION; |
| } |
| } |
| } |
| |
| // We only need to check if the sound trigger session supports concurrent capture if the |
| // input is also a sound trigger input. Otherwise, we should preempt any hotword stream |
| // that's running. |
| const bool allowConcurrentWithSoundTrigger = |
| inputDesc->isSoundTrigger() ? soundTriggerSupportsConcurrentCapture() : false; |
| |
| // if capture is allowed, preempt currently active HOTWORD captures |
| for (size_t i = 0; i < activeInputs.size(); i++) { |
| sp<AudioInputDescriptor> activeDesc = activeInputs[i]; |
| |
| if (is_virtual_input_device(activeDesc->mDevice)) { |
| continue; |
| } |
| |
| if (allowConcurrentWithSoundTrigger && activeDesc->isSoundTrigger()) { |
| continue; |
| } |
| |
| audio_source_t activeSource = activeDesc->inputSource(true); |
| if (activeSource == AUDIO_SOURCE_HOTWORD) { |
| AudioSessionCollection activeSessions = |
| activeDesc->getAudioSessions(true /*activeOnly*/); |
| audio_session_t activeSession = activeSessions.keyAt(0); |
| audio_io_handle_t activeHandle = activeDesc->mIoHandle; |
| SortedVector<audio_session_t> sessions = activeDesc->getPreemptedSessions(); |
| sessions.add(activeSession); |
| inputDesc->setPreemptedSessions(sessions); |
| stopInput(activeHandle, activeSession); |
| releaseInput(activeHandle, activeSession); |
| ALOGV("startInput(%d) for HOTWORD preempting HOTWORD input %d", |
| input, activeDesc->mIoHandle); |
| } |
| } |
| } |
| #endif |
| |
| // increment activity count before calling getNewInputDevice() below as only active sessions |
| // are considered for device selection |
| audioSession->changeActiveCount(1); |
| |
| // Routing? |
| mInputRoutes.incRouteActivity(session); |
| |
| if (audioSession->activeCount() == 1 || mInputRoutes.hasRouteChanged(session)) { |
| // indicate active capture to sound trigger service if starting capture from a mic on |
| // primary HW module |
| audio_devices_t device = getNewInputDevice(inputDesc); |
| setInputDevice(input, device, true /* force */); |
| |
| if (inputDesc->getAudioSessionCount(true/*activeOnly*/) == 1) { |
| // if input maps to a dynamic policy with an activity listener, notify of state change |
| if ((inputDesc->mPolicyMix != NULL) |
| && ((inputDesc->mPolicyMix->mCbFlags & AudioMix::kCbFlagNotifyActivity) != 0)) { |
| mpClientInterface->onDynamicPolicyMixStateUpdate(inputDesc->mPolicyMix->mDeviceAddress, |
| MIX_STATE_MIXING); |
| } |
| |
| audio_devices_t primaryInputDevices = availablePrimaryInputDevices(); |
| if (((device & primaryInputDevices & ~AUDIO_DEVICE_BIT_IN) != 0) && |
| mInputs.activeInputsCountOnDevices(primaryInputDevices) == 1) { |
| SoundTrigger::setCaptureState(true); |
| } |
| |
| // automatically enable the remote submix output when input is started if not |
| // used by a policy mix of type MIX_TYPE_RECORDERS |
| // For remote submix (a virtual device), we open only one input per capture request. |
| if (audio_is_remote_submix_device(inputDesc->mDevice)) { |
| String8 address = String8(""); |
| if (inputDesc->mPolicyMix == NULL) { |
| address = String8("0"); |
| } else if (inputDesc->mPolicyMix->mMixType == MIX_TYPE_PLAYERS) { |
| address = inputDesc->mPolicyMix->mDeviceAddress; |
| } |
| if (address != "") { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_OUT_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE, |
| address, "remote-submix"); |
| } |
| } |
| } |
| } |
| |
| ALOGV("AudioPolicyManager::startInput() input source = %d", audioSession->inputSource()); |
| |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::stopInput(audio_io_handle_t input, |
| audio_session_t session) |
| { |
| ALOGV("stopInput() input %d", input); |
| ssize_t index = mInputs.indexOfKey(input); |
| if (index < 0) { |
| ALOGW("stopInput() unknown input %d", input); |
| return BAD_VALUE; |
| } |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(index); |
| |
| sp<AudioSession> audioSession = inputDesc->getAudioSession(session); |
| if (index < 0) { |
| ALOGW("stopInput() unknown session %d on input %d", session, input); |
| return BAD_VALUE; |
| } |
| |
| if (audioSession->activeCount() == 0) { |
| ALOGW("stopInput() input %d already stopped", input); |
| return INVALID_OPERATION; |
| } |
| |
| audioSession->changeActiveCount(-1); |
| |
| // Routing? |
| mInputRoutes.decRouteActivity(session); |
| |
| if (audioSession->activeCount() == 0) { |
| |
| if (inputDesc->isActive()) { |
| setInputDevice(input, getNewInputDevice(inputDesc), false /* force */); |
| } else { |
| // if input maps to a dynamic policy with an activity listener, notify of state change |
| if ((inputDesc->mPolicyMix != NULL) |
| && ((inputDesc->mPolicyMix->mCbFlags & AudioMix::kCbFlagNotifyActivity) != 0)) { |
| mpClientInterface->onDynamicPolicyMixStateUpdate(inputDesc->mPolicyMix->mDeviceAddress, |
| MIX_STATE_IDLE); |
| } |
| |
| // automatically disable the remote submix output when input is stopped if not |
| // used by a policy mix of type MIX_TYPE_RECORDERS |
| if (audio_is_remote_submix_device(inputDesc->mDevice)) { |
| String8 address = String8(""); |
| if (inputDesc->mPolicyMix == NULL) { |
| address = String8("0"); |
| } else if (inputDesc->mPolicyMix->mMixType == MIX_TYPE_PLAYERS) { |
| address = inputDesc->mPolicyMix->mDeviceAddress; |
| } |
| if (address != "") { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_OUT_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| address, "remote-submix"); |
| } |
| } |
| |
| audio_devices_t device = inputDesc->mDevice; |
| resetInputDevice(input); |
| |
| // indicate inactive capture to sound trigger service if stopping capture from a mic on |
| // primary HW module |
| audio_devices_t primaryInputDevices = availablePrimaryInputDevices(); |
| if (((device & primaryInputDevices & ~AUDIO_DEVICE_BIT_IN) != 0) && |
| mInputs.activeInputsCountOnDevices(primaryInputDevices) == 0) { |
| SoundTrigger::setCaptureState(false); |
| } |
| inputDesc->clearPreemptedSessions(); |
| } |
| } |
| return NO_ERROR; |
| } |
| |
| void AudioPolicyManager::releaseInput(audio_io_handle_t input, |
| audio_session_t session) |
| { |
| |
| ALOGV("releaseInput() %d", input); |
| ssize_t index = mInputs.indexOfKey(input); |
| if (index < 0) { |
| ALOGW("releaseInput() releasing unknown input %d", input); |
| return; |
| } |
| |
| // Routing |
| mInputRoutes.removeRoute(session); |
| |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(index); |
| ALOG_ASSERT(inputDesc != 0); |
| |
| sp<AudioSession> audioSession = inputDesc->getAudioSession(session); |
| if (audioSession == 0) { |
| ALOGW("releaseInput() unknown session %d on input %d", session, input); |
| return; |
| } |
| |
| if (audioSession->openCount() == 0) { |
| ALOGW("releaseInput() invalid open count %d on session %d", |
| audioSession->openCount(), session); |
| return; |
| } |
| |
| if (audioSession->changeOpenCount(-1) == 0) { |
| inputDesc->removeAudioSession(session); |
| } |
| |
| if (inputDesc->getOpenRefCount() > 0) { |
| ALOGV("releaseInput() exit > 0"); |
| return; |
| } |
| |
| closeInput(input); |
| mpClientInterface->onAudioPortListUpdate(); |
| ALOGV("releaseInput() exit"); |
| } |
| |
| void AudioPolicyManager::closeAllInputs() { |
| bool patchRemoved = false; |
| |
| for(size_t input_index = 0; input_index < mInputs.size(); input_index++) { |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(input_index); |
| ssize_t patch_index = mAudioPatches.indexOfKey(inputDesc->getPatchHandle()); |
| if (patch_index >= 0) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(patch_index); |
| (void) /*status_t status*/ mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| mAudioPatches.removeItemsAt(patch_index); |
| patchRemoved = true; |
| } |
| mpClientInterface->closeInput(mInputs.keyAt(input_index)); |
| } |
| mInputs.clear(); |
| SoundTrigger::setCaptureState(false); |
| nextAudioPortGeneration(); |
| |
| if (patchRemoved) { |
| mpClientInterface->onAudioPatchListUpdate(); |
| } |
| } |
| |
| void AudioPolicyManager::initStreamVolume(audio_stream_type_t stream, |
| int indexMin, |
| int indexMax) |
| { |
| ALOGV("initStreamVolume() stream %d, min %d, max %d", stream , indexMin, indexMax); |
| mVolumeCurves->initStreamVolume(stream, indexMin, indexMax); |
| |
| // initialize other private stream volumes which follow this one |
| for (int curStream = 0; curStream < AUDIO_STREAM_FOR_POLICY_CNT; curStream++) { |
| if (!streamsMatchForvolume(stream, (audio_stream_type_t)curStream)) { |
| continue; |
| } |
| mVolumeCurves->initStreamVolume((audio_stream_type_t)curStream, indexMin, indexMax); |
| } |
| } |
| |
| status_t AudioPolicyManager::setStreamVolumeIndex(audio_stream_type_t stream, |
| int index, |
| audio_devices_t device) |
| { |
| |
| if ((index < mVolumeCurves->getVolumeIndexMin(stream)) || |
| (index > mVolumeCurves->getVolumeIndexMax(stream))) { |
| return BAD_VALUE; |
| } |
| if (!audio_is_output_device(device)) { |
| return BAD_VALUE; |
| } |
| |
| // Force max volume if stream cannot be muted |
| if (!mVolumeCurves->canBeMuted(stream)) index = mVolumeCurves->getVolumeIndexMax(stream); |
| |
| ALOGV("setStreamVolumeIndex() stream %d, device %08x, index %d", |
| stream, device, index); |
| |
| // update other private stream volumes which follow this one |
| for (int curStream = 0; curStream < AUDIO_STREAM_FOR_POLICY_CNT; curStream++) { |
| if (!streamsMatchForvolume(stream, (audio_stream_type_t)curStream)) { |
| continue; |
| } |
| mVolumeCurves->addCurrentVolumeIndex((audio_stream_type_t)curStream, device, index); |
| } |
| |
| // update volume on all outputs and streams matching the following: |
| // - The requested stream (or a stream matching for volume control) is active on the output |
| // - The device (or devices) selected by the strategy corresponding to this stream includes |
| // the requested device |
| // - For non default requested device, currently selected device on the output is either the |
| // requested device or one of the devices selected by the strategy |
| // - For default requested device (AUDIO_DEVICE_OUT_DEFAULT_FOR_VOLUME), apply volume only if |
| // no specific device volume value exists for currently selected device. |
| status_t status = NO_ERROR; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| audio_devices_t curDevice = Volume::getDeviceForVolume(desc->device()); |
| for (int curStream = 0; curStream < AUDIO_STREAM_FOR_POLICY_CNT; curStream++) { |
| if (!streamsMatchForvolume(stream, (audio_stream_type_t)curStream)) { |
| continue; |
| } |
| if (!(desc->isStreamActive((audio_stream_type_t)curStream) || |
| (isInCall() && (curStream == AUDIO_STREAM_VOICE_CALL)))) { |
| continue; |
| } |
| routing_strategy curStrategy = getStrategy((audio_stream_type_t)curStream); |
| audio_devices_t curStreamDevice = Volume::getDeviceForVolume(getDeviceForStrategy( |
| curStrategy, false /*fromCache*/)); |
| if ((device != AUDIO_DEVICE_OUT_DEFAULT_FOR_VOLUME) && |
| ((curStreamDevice & device) == 0)) { |
| continue; |
| } |
| bool applyVolume; |
| if (device != AUDIO_DEVICE_OUT_DEFAULT_FOR_VOLUME) { |
| curStreamDevice |= device; |
| applyVolume = (curDevice & curStreamDevice) != 0; |
| } else { |
| applyVolume = !mVolumeCurves->hasVolumeIndexForDevice( |
| stream, curStreamDevice); |
| } |
| |
| if (applyVolume) { |
| //FIXME: workaround for truncated touch sounds |
| // delayed volume change for system stream to be removed when the problem is |
| // handled by system UI |
| status_t volStatus = |
| checkAndSetVolume((audio_stream_type_t)curStream, index, desc, curDevice, |
| (stream == AUDIO_STREAM_SYSTEM) ? TOUCH_SOUND_FIXED_DELAY_MS : 0); |
| if (volStatus != NO_ERROR) { |
| status = volStatus; |
| } |
| } |
| } |
| } |
| return status; |
| } |
| |
| status_t AudioPolicyManager::getStreamVolumeIndex(audio_stream_type_t stream, |
| int *index, |
| audio_devices_t device) |
| { |
| if (index == NULL) { |
| return BAD_VALUE; |
| } |
| if (!audio_is_output_device(device)) { |
| return BAD_VALUE; |
| } |
| // if device is AUDIO_DEVICE_OUT_DEFAULT_FOR_VOLUME, return volume for device corresponding to |
| // the strategy the stream belongs to. |
| if (device == AUDIO_DEVICE_OUT_DEFAULT_FOR_VOLUME) { |
| device = getDeviceForStrategy(getStrategy(stream), true /*fromCache*/); |
| } |
| device = Volume::getDeviceForVolume(device); |
| |
| *index = mVolumeCurves->getVolumeIndex(stream, device); |
| ALOGV("getStreamVolumeIndex() stream %d device %08x index %d", stream, device, *index); |
| return NO_ERROR; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::selectOutputForMusicEffects() |
| { |
| // select one output among several suitable for global effects. |
| // The priority is as follows: |
| // 1: An offloaded output. If the effect ends up not being offloadable, |
| // AudioFlinger will invalidate the track and the offloaded output |
| // will be closed causing the effect to be moved to a PCM output. |
| // 2: A deep buffer output |
| // 3: The primary output |
| // 4: the first output in the list |
| |
| routing_strategy strategy = getStrategy(AUDIO_STREAM_MUSIC); |
| audio_devices_t device = getDeviceForStrategy(strategy, false /*fromCache*/); |
| SortedVector<audio_io_handle_t> outputs = getOutputsForDevice(device, mOutputs); |
| |
| if (outputs.size() == 0) { |
| return AUDIO_IO_HANDLE_NONE; |
| } |
| |
| audio_io_handle_t output = AUDIO_IO_HANDLE_NONE; |
| bool activeOnly = true; |
| |
| while (output == AUDIO_IO_HANDLE_NONE) { |
| audio_io_handle_t outputOffloaded = AUDIO_IO_HANDLE_NONE; |
| audio_io_handle_t outputDeepBuffer = AUDIO_IO_HANDLE_NONE; |
| audio_io_handle_t outputPrimary = AUDIO_IO_HANDLE_NONE; |
| |
| for (size_t i = 0; i < outputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueFor(outputs[i]); |
| if (activeOnly && !desc->isStreamActive(AUDIO_STREAM_MUSIC)) { |
| continue; |
| } |
| ALOGV("selectOutputForMusicEffects activeOnly %d outputs[%zu] flags 0x%08x", |
| activeOnly, i, desc->mFlags); |
| if ((desc->mFlags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) != 0) { |
| outputOffloaded = outputs[i]; |
| } |
| if ((desc->mFlags & AUDIO_OUTPUT_FLAG_DEEP_BUFFER) != 0) { |
| outputDeepBuffer = outputs[i]; |
| } |
| if ((desc->mFlags & AUDIO_OUTPUT_FLAG_PRIMARY) != 0) { |
| outputPrimary = outputs[i]; |
| } |
| } |
| if (outputOffloaded != AUDIO_IO_HANDLE_NONE) { |
| output = outputOffloaded; |
| } else if (outputDeepBuffer != AUDIO_IO_HANDLE_NONE) { |
| output = outputDeepBuffer; |
| } else if (outputPrimary != AUDIO_IO_HANDLE_NONE) { |
| output = outputPrimary; |
| } else { |
| output = outputs[0]; |
| } |
| activeOnly = false; |
| } |
| |
| if (output != mMusicEffectOutput) { |
| mpClientInterface->moveEffects(AUDIO_SESSION_OUTPUT_MIX, mMusicEffectOutput, output); |
| mMusicEffectOutput = output; |
| } |
| |
| ALOGV("selectOutputForMusicEffects selected output %d", output); |
| return output; |
| } |
| |
| audio_io_handle_t AudioPolicyManager::getOutputForEffect(const effect_descriptor_t *desc __unused) |
| { |
| return selectOutputForMusicEffects(); |
| } |
| |
| status_t AudioPolicyManager::registerEffect(const effect_descriptor_t *desc, |
| audio_io_handle_t io, |
| uint32_t strategy, |
| int session, |
| int id) |
| { |
| ssize_t index = mOutputs.indexOfKey(io); |
| if (index < 0) { |
| index = mInputs.indexOfKey(io); |
| if (index < 0) { |
| ALOGW("registerEffect() unknown io %d", io); |
| return INVALID_OPERATION; |
| } |
| } |
| return mEffects.registerEffect(desc, io, strategy, session, id); |
| } |
| |
| bool AudioPolicyManager::isStreamActive(audio_stream_type_t stream, uint32_t inPastMs) const |
| { |
| bool active = false; |
| for (int curStream = 0; curStream < AUDIO_STREAM_FOR_POLICY_CNT && !active; curStream++) { |
| if (!streamsMatchForvolume(stream, (audio_stream_type_t)curStream)) { |
| continue; |
| } |
| active = mOutputs.isStreamActive((audio_stream_type_t)curStream, inPastMs); |
| } |
| return active; |
| } |
| |
| bool AudioPolicyManager::isStreamActiveRemotely(audio_stream_type_t stream, uint32_t inPastMs) const |
| { |
| return mOutputs.isStreamActiveRemotely(stream, inPastMs); |
| } |
| |
| bool AudioPolicyManager::isSourceActive(audio_source_t source) const |
| { |
| for (size_t i = 0; i < mInputs.size(); i++) { |
| const sp<AudioInputDescriptor> inputDescriptor = mInputs.valueAt(i); |
| if (inputDescriptor->isSourceActive(source)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| // Register a list of custom mixes with their attributes and format. |
| // When a mix is registered, corresponding input and output profiles are |
| // added to the remote submix hw module. The profile contains only the |
| // parameters (sampling rate, format...) specified by the mix. |
| // The corresponding input remote submix device is also connected. |
| // |
| // When a remote submix device is connected, the address is checked to select the |
| // appropriate profile and the corresponding input or output stream is opened. |
| // |
| // When capture starts, getInputForAttr() will: |
| // - 1 look for a mix matching the address passed in attribtutes tags if any |
| // - 2 if none found, getDeviceForInputSource() will: |
| // - 2.1 look for a mix matching the attributes source |
| // - 2.2 if none found, default to device selection by policy rules |
| // At this time, the corresponding output remote submix device is also connected |
| // and active playback use cases can be transferred to this mix if needed when reconnecting |
| // after AudioTracks are invalidated |
| // |
| // When playback starts, getOutputForAttr() will: |
| // - 1 look for a mix matching the address passed in attribtutes tags if any |
| // - 2 if none found, look for a mix matching the attributes usage |
| // - 3 if none found, default to device and output selection by policy rules. |
| |
| status_t AudioPolicyManager::registerPolicyMixes(const Vector<AudioMix>& mixes) |
| { |
| ALOGV("registerPolicyMixes() %zu mix(es)", mixes.size()); |
| status_t res = NO_ERROR; |
| |
| sp<HwModule> rSubmixModule; |
| // examine each mix's route type |
| for (size_t i = 0; i < mixes.size(); i++) { |
| // we only support MIX_ROUTE_FLAG_LOOP_BACK or MIX_ROUTE_FLAG_RENDER, not the combination |
| if ((mixes[i].mRouteFlags & MIX_ROUTE_FLAG_ALL) == MIX_ROUTE_FLAG_ALL) { |
| res = INVALID_OPERATION; |
| break; |
| } |
| if ((mixes[i].mRouteFlags & MIX_ROUTE_FLAG_LOOP_BACK) == MIX_ROUTE_FLAG_LOOP_BACK) { |
| // Loop back through "remote submix" |
| if (rSubmixModule == 0) { |
| for (size_t j = 0; i < mHwModules.size(); j++) { |
| if (strcmp(AUDIO_HARDWARE_MODULE_ID_REMOTE_SUBMIX, mHwModules[j]->mName) == 0 |
| && mHwModules[j]->mHandle != 0) { |
| rSubmixModule = mHwModules[j]; |
| break; |
| } |
| } |
| } |
| |
| ALOGV("registerPolicyMixes() mix %zu of %zu is LOOP_BACK", i, mixes.size()); |
| |
| if (rSubmixModule == 0) { |
| ALOGE(" Unable to find audio module for submix, aborting mix %zu registration", i); |
| res = INVALID_OPERATION; |
| break; |
| } |
| |
| String8 address = mixes[i].mDeviceAddress; |
| |
| if (mPolicyMixes.registerMix(address, mixes[i], 0 /*output desc*/) != NO_ERROR) { |
| ALOGE(" Error registering mix %zu for address %s", i, address.string()); |
| res = INVALID_OPERATION; |
| break; |
| } |
| audio_config_t outputConfig = mixes[i].mFormat; |
| audio_config_t inputConfig = mixes[i].mFormat; |
| // NOTE: audio flinger mixer does not support mono output: configure remote submix HAL in |
| // stereo and let audio flinger do the channel conversion if needed. |
| outputConfig.channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| inputConfig.channel_mask = AUDIO_CHANNEL_IN_STEREO; |
| rSubmixModule->addOutputProfile(address, &outputConfig, |
| AUDIO_DEVICE_OUT_REMOTE_SUBMIX, address); |
| rSubmixModule->addInputProfile(address, &inputConfig, |
| AUDIO_DEVICE_IN_REMOTE_SUBMIX, address); |
| |
| if (mixes[i].mMixType == MIX_TYPE_PLAYERS) { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_IN_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE, |
| address.string(), "remote-submix"); |
| } else { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_OUT_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE, |
| address.string(), "remote-submix"); |
| } |
| } else if ((mixes[i].mRouteFlags & MIX_ROUTE_FLAG_RENDER) == MIX_ROUTE_FLAG_RENDER) { |
| String8 address = mixes[i].mDeviceAddress; |
| audio_devices_t device = mixes[i].mDeviceType; |
| ALOGV(" registerPolicyMixes() mix %zu of %zu is RENDER, dev=0x%X addr=%s", |
| i, mixes.size(), device, address.string()); |
| |
| bool foundOutput = false; |
| for (size_t j = 0 ; j < mOutputs.size() ; j++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(j); |
| sp<AudioPatch> patch = mAudioPatches.valueFor(desc->getPatchHandle()); |
| if ((patch != 0) && (patch->mPatch.num_sinks != 0) |
| && (patch->mPatch.sinks[0].type == AUDIO_PORT_TYPE_DEVICE) |
| && (patch->mPatch.sinks[0].ext.device.type == device) |
| && (strncmp(patch->mPatch.sinks[0].ext.device.address, address.string(), |
| AUDIO_DEVICE_MAX_ADDRESS_LEN) == 0)) { |
| if (mPolicyMixes.registerMix(address, mixes[i], desc) != NO_ERROR) { |
| res = INVALID_OPERATION; |
| } else { |
| foundOutput = true; |
| } |
| break; |
| } |
| } |
| |
| if (res != NO_ERROR) { |
| ALOGE(" Error registering mix %zu for device 0x%X addr %s", |
| i, device, address.string()); |
| res = INVALID_OPERATION; |
| break; |
| } else if (!foundOutput) { |
| ALOGE(" Output not found for mix %zu for device 0x%X addr %s", |
| i, device, address.string()); |
| res = INVALID_OPERATION; |
| break; |
| } |
| } |
| } |
| if (res != NO_ERROR) { |
| unregisterPolicyMixes(mixes); |
| } |
| return res; |
| } |
| |
| status_t AudioPolicyManager::unregisterPolicyMixes(Vector<AudioMix> mixes) |
| { |
| ALOGV("unregisterPolicyMixes() num mixes %zu", mixes.size()); |
| status_t res = NO_ERROR; |
| sp<HwModule> rSubmixModule; |
| // examine each mix's route type |
| for (size_t i = 0; i < mixes.size(); i++) { |
| if ((mixes[i].mRouteFlags & MIX_ROUTE_FLAG_LOOP_BACK) == MIX_ROUTE_FLAG_LOOP_BACK) { |
| |
| if (rSubmixModule == 0) { |
| for (size_t j = 0; i < mHwModules.size(); j++) { |
| if (strcmp(AUDIO_HARDWARE_MODULE_ID_REMOTE_SUBMIX, mHwModules[j]->mName) == 0 |
| && mHwModules[j]->mHandle != 0) { |
| rSubmixModule = mHwModules[j]; |
| break; |
| } |
| } |
| } |
| if (rSubmixModule == 0) { |
| res = INVALID_OPERATION; |
| continue; |
| } |
| |
| String8 address = mixes[i].mDeviceAddress; |
| |
| if (mPolicyMixes.unregisterMix(address) != NO_ERROR) { |
| res = INVALID_OPERATION; |
| continue; |
| } |
| |
| if (getDeviceConnectionState(AUDIO_DEVICE_IN_REMOTE_SUBMIX, address.string()) == |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE) { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_IN_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| address.string(), "remote-submix"); |
| } |
| if (getDeviceConnectionState(AUDIO_DEVICE_OUT_REMOTE_SUBMIX, address.string()) == |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE) { |
| setDeviceConnectionStateInt(AUDIO_DEVICE_OUT_REMOTE_SUBMIX, |
| AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE, |
| address.string(), "remote-submix"); |
| } |
| rSubmixModule->removeOutputProfile(address); |
| rSubmixModule->removeInputProfile(address); |
| |
| } if ((mixes[i].mRouteFlags & MIX_ROUTE_FLAG_RENDER) == MIX_ROUTE_FLAG_RENDER) { |
| if (mPolicyMixes.unregisterMix(mixes[i].mDeviceAddress) != NO_ERROR) { |
| res = INVALID_OPERATION; |
| continue; |
| } |
| } |
| } |
| return res; |
| } |
| |
| |
| status_t AudioPolicyManager::dump(int fd) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| snprintf(buffer, SIZE, "\nAudioPolicyManager Dump: %p\n", this); |
| result.append(buffer); |
| |
| snprintf(buffer, SIZE, " Primary Output: %d\n", |
| hasPrimaryOutput() ? mPrimaryOutput->mIoHandle : AUDIO_IO_HANDLE_NONE); |
| result.append(buffer); |
| std::string stateLiteral; |
| AudioModeConverter::toString(mEngine->getPhoneState(), stateLiteral); |
| snprintf(buffer, SIZE, " Phone state: %s\n", stateLiteral.c_str()); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for communications %d\n", |
| mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_COMMUNICATION)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for media %d\n", mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_MEDIA)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for record %d\n", mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_RECORD)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for dock %d\n", mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_DOCK)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for system %d\n", mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for hdmi system audio %d\n", |
| mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_HDMI_SYSTEM_AUDIO)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Force use for encoded surround output %d\n", |
| mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_ENCODED_SURROUND)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " TTS output %s\n", mTtsOutputAvailable ? "available" : "not available"); |
| result.append(buffer); |
| snprintf(buffer, SIZE, " Master mono: %s\n", mMasterMono ? "on" : "off"); |
| result.append(buffer); |
| |
| write(fd, result.string(), result.size()); |
| |
| mAvailableOutputDevices.dump(fd, String8("Available output")); |
| mAvailableInputDevices.dump(fd, String8("Available input")); |
| mHwModules.dump(fd); |
| mOutputs.dump(fd); |
| mInputs.dump(fd); |
| mVolumeCurves->dump(fd); |
| mEffects.dump(fd); |
| mAudioPatches.dump(fd); |
| mPolicyMixes.dump(fd); |
| |
| return NO_ERROR; |
| } |
| |
| // This function checks for the parameters which can be offloaded. |
| // This can be enhanced depending on the capability of the DSP and policy |
| // of the system. |
| bool AudioPolicyManager::isOffloadSupported(const audio_offload_info_t& offloadInfo) |
| { |
| ALOGV("isOffloadSupported: SR=%u, CM=0x%x, Format=0x%x, StreamType=%d," |
| " BitRate=%u, duration=%" PRId64 " us, has_video=%d", |
| offloadInfo.sample_rate, offloadInfo.channel_mask, |
| offloadInfo.format, |
| offloadInfo.stream_type, offloadInfo.bit_rate, offloadInfo.duration_us, |
| offloadInfo.has_video); |
| |
| if (mMasterMono) { |
| return false; // no offloading if mono is set. |
| } |
| |
| // Check if offload has been disabled |
| char propValue[PROPERTY_VALUE_MAX]; |
| if (property_get("audio.offload.disable", propValue, "0")) { |
| if (atoi(propValue) != 0) { |
| ALOGV("offload disabled by audio.offload.disable=%s", propValue ); |
| return false; |
| } |
| } |
| |
| // Check if stream type is music, then only allow offload as of now. |
| if (offloadInfo.stream_type != AUDIO_STREAM_MUSIC) |
| { |
| ALOGV("isOffloadSupported: stream_type != MUSIC, returning false"); |
| return false; |
| } |
| |
| //TODO: enable audio offloading with video when ready |
| const bool allowOffloadWithVideo = |
| property_get_bool("audio.offload.video", false /* default_value */); |
| if (offloadInfo.has_video && !allowOffloadWithVideo) { |
| ALOGV("isOffloadSupported: has_video == true, returning false"); |
| return false; |
| } |
| |
| //If duration is less than minimum value defined in property, return false |
| if (property_get("audio.offload.min.duration.secs", propValue, NULL)) { |
| if (offloadInfo.duration_us < (atoi(propValue) * 1000000 )) { |
| ALOGV("Offload denied by duration < audio.offload.min.duration.secs(=%s)", propValue); |
| return false; |
| } |
| } else if (offloadInfo.duration_us < OFFLOAD_DEFAULT_MIN_DURATION_SECS * 1000000) { |
| ALOGV("Offload denied by duration < default min(=%u)", OFFLOAD_DEFAULT_MIN_DURATION_SECS); |
| return false; |
| } |
| |
| // Do not allow offloading if one non offloadable effect is enabled. This prevents from |
| // creating an offloaded track and tearing it down immediately after start when audioflinger |
| // detects there is an active non offloadable effect. |
| // FIXME: We should check the audio session here but we do not have it in this context. |
| // This may prevent offloading in rare situations where effects are left active by apps |
| // in the background. |
| if (mEffects.isNonOffloadableEffectEnabled()) { |
| return false; |
| } |
| |
| // See if there is a profile to support this. |
| // AUDIO_DEVICE_NONE |
| sp<IOProfile> profile = getProfileForDirectOutput(AUDIO_DEVICE_NONE /*ignore device */, |
| offloadInfo.sample_rate, |
| offloadInfo.format, |
| offloadInfo.channel_mask, |
| AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD); |
| ALOGV("isOffloadSupported() profile %sfound", profile != 0 ? "" : "NOT "); |
| return (profile != 0); |
| } |
| |
| status_t AudioPolicyManager::listAudioPorts(audio_port_role_t role, |
| audio_port_type_t type, |
| unsigned int *num_ports, |
| struct audio_port *ports, |
| unsigned int *generation) |
| { |
| if (num_ports == NULL || (*num_ports != 0 && ports == NULL) || |
| generation == NULL) { |
| return BAD_VALUE; |
| } |
| ALOGV("listAudioPorts() role %d type %d num_ports %d ports %p", role, type, *num_ports, ports); |
| if (ports == NULL) { |
| *num_ports = 0; |
| } |
| |
| size_t portsWritten = 0; |
| size_t portsMax = *num_ports; |
| *num_ports = 0; |
| if (type == AUDIO_PORT_TYPE_NONE || type == AUDIO_PORT_TYPE_DEVICE) { |
| // do not report devices with type AUDIO_DEVICE_IN_STUB or AUDIO_DEVICE_OUT_STUB |
| // as they are used by stub HALs by convention |
| if (role == AUDIO_PORT_ROLE_SINK || role == AUDIO_PORT_ROLE_NONE) { |
| for (size_t i = 0; i < mAvailableOutputDevices.size(); i++) { |
| if (mAvailableOutputDevices[i]->type() == AUDIO_DEVICE_OUT_STUB) { |
| continue; |
| } |
| if (portsWritten < portsMax) { |
| mAvailableOutputDevices[i]->toAudioPort(&ports[portsWritten++]); |
| } |
| (*num_ports)++; |
| } |
| } |
| if (role == AUDIO_PORT_ROLE_SOURCE || role == AUDIO_PORT_ROLE_NONE) { |
| for (size_t i = 0; i < mAvailableInputDevices.size(); i++) { |
| if (mAvailableInputDevices[i]->type() == AUDIO_DEVICE_IN_STUB) { |
| continue; |
| } |
| if (portsWritten < portsMax) { |
| mAvailableInputDevices[i]->toAudioPort(&ports[portsWritten++]); |
| } |
| (*num_ports)++; |
| } |
| } |
| } |
| if (type == AUDIO_PORT_TYPE_NONE || type == AUDIO_PORT_TYPE_MIX) { |
| if (role == AUDIO_PORT_ROLE_SINK || role == AUDIO_PORT_ROLE_NONE) { |
| for (size_t i = 0; i < mInputs.size() && portsWritten < portsMax; i++) { |
| mInputs[i]->toAudioPort(&ports[portsWritten++]); |
| } |
| *num_ports += mInputs.size(); |
| } |
| if (role == AUDIO_PORT_ROLE_SOURCE || role == AUDIO_PORT_ROLE_NONE) { |
| size_t numOutputs = 0; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| if (!mOutputs[i]->isDuplicated()) { |
| numOutputs++; |
| if (portsWritten < portsMax) { |
| mOutputs[i]->toAudioPort(&ports[portsWritten++]); |
| } |
| } |
| } |
| *num_ports += numOutputs; |
| } |
| } |
| *generation = curAudioPortGeneration(); |
| ALOGV("listAudioPorts() got %zu ports needed %d", portsWritten, *num_ports); |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::getAudioPort(struct audio_port *port __unused) |
| { |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::createAudioPatch(const struct audio_patch *patch, |
| audio_patch_handle_t *handle, |
| uid_t uid) |
| { |
| ALOGV("createAudioPatch()"); |
| |
| if (handle == NULL || patch == NULL) { |
| return BAD_VALUE; |
| } |
| ALOGV("createAudioPatch() num sources %d num sinks %d", patch->num_sources, patch->num_sinks); |
| |
| if (patch->num_sources == 0 || patch->num_sources > AUDIO_PATCH_PORTS_MAX || |
| patch->num_sinks == 0 || patch->num_sinks > AUDIO_PATCH_PORTS_MAX) { |
| return BAD_VALUE; |
| } |
| // only one source per audio patch supported for now |
| if (patch->num_sources > 1) { |
| return INVALID_OPERATION; |
| } |
| |
| if (patch->sources[0].role != AUDIO_PORT_ROLE_SOURCE) { |
| return INVALID_OPERATION; |
| } |
| for (size_t i = 0; i < patch->num_sinks; i++) { |
| if (patch->sinks[i].role != AUDIO_PORT_ROLE_SINK) { |
| return INVALID_OPERATION; |
| } |
| } |
| |
| sp<AudioPatch> patchDesc; |
| ssize_t index = mAudioPatches.indexOfKey(*handle); |
| |
| ALOGV("createAudioPatch source id %d role %d type %d", patch->sources[0].id, |
| patch->sources[0].role, |
| patch->sources[0].type); |
| #if LOG_NDEBUG == 0 |
| for (size_t i = 0; i < patch->num_sinks; i++) { |
| ALOGV("createAudioPatch sink %zu: id %d role %d type %d", i, patch->sinks[i].id, |
| patch->sinks[i].role, |
| patch->sinks[i].type); |
| } |
| #endif |
| |
| if (index >= 0) { |
| patchDesc = mAudioPatches.valueAt(index); |
| ALOGV("createAudioPatch() mUidCached %d patchDesc->mUid %d uid %d", |
| mUidCached, patchDesc->mUid, uid); |
| if (patchDesc->mUid != mUidCached && uid != patchDesc->mUid) { |
| return INVALID_OPERATION; |
| } |
| } else { |
| *handle = AUDIO_PATCH_HANDLE_NONE; |
| } |
| |
| if (patch->sources[0].type == AUDIO_PORT_TYPE_MIX) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.getOutputFromId(patch->sources[0].id); |
| if (outputDesc == NULL) { |
| ALOGV("createAudioPatch() output not found for id %d", patch->sources[0].id); |
| return BAD_VALUE; |
| } |
| ALOG_ASSERT(!outputDesc->isDuplicated(),"duplicated output %d in source in ports", |
| outputDesc->mIoHandle); |
| if (patchDesc != 0) { |
| if (patchDesc->mPatch.sources[0].id != patch->sources[0].id) { |
| ALOGV("createAudioPatch() source id differs for patch current id %d new id %d", |
| patchDesc->mPatch.sources[0].id, patch->sources[0].id); |
| return BAD_VALUE; |
| } |
| } |
| DeviceVector devices; |
| for (size_t i = 0; i < patch->num_sinks; i++) { |
| // Only support mix to devices connection |
| // TODO add support for mix to mix connection |
| if (patch->sinks[i].type != AUDIO_PORT_TYPE_DEVICE) { |
| ALOGV("createAudioPatch() source mix but sink is not a device"); |
| return INVALID_OPERATION; |
| } |
| sp<DeviceDescriptor> devDesc = |
| mAvailableOutputDevices.getDeviceFromId(patch->sinks[i].id); |
| if (devDesc == 0) { |
| ALOGV("createAudioPatch() out device not found for id %d", patch->sinks[i].id); |
| return BAD_VALUE; |
| } |
| |
| if (!outputDesc->mProfile->isCompatibleProfile(devDesc->type(), |
| devDesc->mAddress, |
| patch->sources[0].sample_rate, |
| NULL, // updatedSamplingRate |
| patch->sources[0].format, |
| NULL, // updatedFormat |
| patch->sources[0].channel_mask, |
| NULL, // updatedChannelMask |
| AUDIO_OUTPUT_FLAG_NONE /*FIXME*/)) { |
| ALOGV("createAudioPatch() profile not supported for device %08x", |
| devDesc->type()); |
| return INVALID_OPERATION; |
| } |
| devices.add(devDesc); |
| } |
| if (devices.size() == 0) { |
| return INVALID_OPERATION; |
| } |
| |
| // TODO: reconfigure output format and channels here |
| ALOGV("createAudioPatch() setting device %08x on output %d", |
| devices.types(), outputDesc->mIoHandle); |
| setOutputDevice(outputDesc, devices.types(), true, 0, handle); |
| index = mAudioPatches.indexOfKey(*handle); |
| if (index >= 0) { |
| if (patchDesc != 0 && patchDesc != mAudioPatches.valueAt(index)) { |
| ALOGW("createAudioPatch() setOutputDevice() did not reuse the patch provided"); |
| } |
| patchDesc = mAudioPatches.valueAt(index); |
| patchDesc->mUid = uid; |
| ALOGV("createAudioPatch() success"); |
| } else { |
| ALOGW("createAudioPatch() setOutputDevice() failed to create a patch"); |
| return INVALID_OPERATION; |
| } |
| } else if (patch->sources[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| if (patch->sinks[0].type == AUDIO_PORT_TYPE_MIX) { |
| // input device to input mix connection |
| // only one sink supported when connecting an input device to a mix |
| if (patch->num_sinks > 1) { |
| return INVALID_OPERATION; |
| } |
| sp<AudioInputDescriptor> inputDesc = mInputs.getInputFromId(patch->sinks[0].id); |
| if (inputDesc == NULL) { |
| return BAD_VALUE; |
| } |
| if (patchDesc != 0) { |
| if (patchDesc->mPatch.sinks[0].id != patch->sinks[0].id) { |
| return BAD_VALUE; |
| } |
| } |
| sp<DeviceDescriptor> devDesc = |
| mAvailableInputDevices.getDeviceFromId(patch->sources[0].id); |
| if (devDesc == 0) { |
| return BAD_VALUE; |
| } |
| |
| if (!inputDesc->mProfile->isCompatibleProfile(devDesc->type(), |
| devDesc->mAddress, |
| patch->sinks[0].sample_rate, |
| NULL, /*updatedSampleRate*/ |
| patch->sinks[0].format, |
| NULL, /*updatedFormat*/ |
| patch->sinks[0].channel_mask, |
| NULL, /*updatedChannelMask*/ |
| // FIXME for the parameter type, |
| // and the NONE |
| (audio_output_flags_t) |
| AUDIO_INPUT_FLAG_NONE)) { |
| return INVALID_OPERATION; |
| } |
| // TODO: reconfigure output format and channels here |
| ALOGV("createAudioPatch() setting device %08x on output %d", |
| devDesc->type(), inputDesc->mIoHandle); |
| setInputDevice(inputDesc->mIoHandle, devDesc->type(), true, handle); |
| index = mAudioPatches.indexOfKey(*handle); |
| if (index >= 0) { |
| if (patchDesc != 0 && patchDesc != mAudioPatches.valueAt(index)) { |
| ALOGW("createAudioPatch() setInputDevice() did not reuse the patch provided"); |
| } |
| patchDesc = mAudioPatches.valueAt(index); |
| patchDesc->mUid = uid; |
| ALOGV("createAudioPatch() success"); |
| } else { |
| ALOGW("createAudioPatch() setInputDevice() failed to create a patch"); |
| return INVALID_OPERATION; |
| } |
| } else if (patch->sinks[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| // device to device connection |
| if (patchDesc != 0) { |
| if (patchDesc->mPatch.sources[0].id != patch->sources[0].id) { |
| return BAD_VALUE; |
| } |
| } |
| sp<DeviceDescriptor> srcDeviceDesc = |
| mAvailableInputDevices.getDeviceFromId(patch->sources[0].id); |
| if (srcDeviceDesc == 0) { |
| return BAD_VALUE; |
| } |
| |
| //update source and sink with our own data as the data passed in the patch may |
| // be incomplete. |
| struct audio_patch newPatch = *patch; |
| srcDeviceDesc->toAudioPortConfig(&newPatch.sources[0], &patch->sources[0]); |
| |
| for (size_t i = 0; i < patch->num_sinks; i++) { |
| if (patch->sinks[i].type != AUDIO_PORT_TYPE_DEVICE) { |
| ALOGV("createAudioPatch() source device but one sink is not a device"); |
| return INVALID_OPERATION; |
| } |
| |
| sp<DeviceDescriptor> sinkDeviceDesc = |
| mAvailableOutputDevices.getDeviceFromId(patch->sinks[i].id); |
| if (sinkDeviceDesc == 0) { |
| return BAD_VALUE; |
| } |
| sinkDeviceDesc->toAudioPortConfig(&newPatch.sinks[i], &patch->sinks[i]); |
| |
| // create a software bridge in PatchPanel if: |
| // - source and sink devices are on differnt HW modules OR |
| // - audio HAL version is < 3.0 |
| if (!srcDeviceDesc->hasSameHwModuleAs(sinkDeviceDesc) || |
| (srcDeviceDesc->mModule->getHalVersionMajor() < 3)) { |
| // support only one sink device for now to simplify output selection logic |
| if (patch->num_sinks > 1) { |
| return INVALID_OPERATION; |
| } |
| SortedVector<audio_io_handle_t> outputs = |
| getOutputsForDevice(sinkDeviceDesc->type(), mOutputs); |
| // if the sink device is reachable via an opened output stream, request to go via |
| // this output stream by adding a second source to the patch description |
| audio_io_handle_t output = selectOutput(outputs, |
| AUDIO_OUTPUT_FLAG_NONE, |
| AUDIO_FORMAT_INVALID); |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| sp<AudioOutputDescriptor> outputDesc = mOutputs.valueFor(output); |
| if (outputDesc->isDuplicated()) { |
| return INVALID_OPERATION; |
| } |
| outputDesc->toAudioPortConfig(&newPatch.sources[1], &patch->sources[0]); |
| newPatch.sources[1].ext.mix.usecase.stream = AUDIO_STREAM_PATCH; |
| newPatch.num_sources = 2; |
| } |
| } |
| } |
| // TODO: check from routing capabilities in config file and other conflicting patches |
| |
| audio_patch_handle_t afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| if (index >= 0) { |
| afPatchHandle = patchDesc->mAfPatchHandle; |
| } |
| |
| status_t status = mpClientInterface->createAudioPatch(&newPatch, |
| &afPatchHandle, |
| 0); |
| ALOGV("createAudioPatch() patch panel returned %d patchHandle %d", |
| status, afPatchHandle); |
| if (status == NO_ERROR) { |
| if (index < 0) { |
| patchDesc = new AudioPatch(&newPatch, uid); |
| addAudioPatch(patchDesc->mHandle, patchDesc); |
| } else { |
| patchDesc->mPatch = newPatch; |
| } |
| patchDesc->mAfPatchHandle = afPatchHandle; |
| *handle = patchDesc->mHandle; |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } else { |
| ALOGW("createAudioPatch() patch panel could not connect device patch, error %d", |
| status); |
| return INVALID_OPERATION; |
| } |
| } else { |
| return BAD_VALUE; |
| } |
| } else { |
| return BAD_VALUE; |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::releaseAudioPatch(audio_patch_handle_t handle, |
| uid_t uid) |
| { |
| ALOGV("releaseAudioPatch() patch %d", handle); |
| |
| ssize_t index = mAudioPatches.indexOfKey(handle); |
| |
| if (index < 0) { |
| return BAD_VALUE; |
| } |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| ALOGV("releaseAudioPatch() mUidCached %d patchDesc->mUid %d uid %d", |
| mUidCached, patchDesc->mUid, uid); |
| if (patchDesc->mUid != mUidCached && uid != patchDesc->mUid) { |
| return INVALID_OPERATION; |
| } |
| |
| struct audio_patch *patch = &patchDesc->mPatch; |
| patchDesc->mUid = mUidCached; |
| if (patch->sources[0].type == AUDIO_PORT_TYPE_MIX) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.getOutputFromId(patch->sources[0].id); |
| if (outputDesc == NULL) { |
| ALOGV("releaseAudioPatch() output not found for id %d", patch->sources[0].id); |
| return BAD_VALUE; |
| } |
| |
| setOutputDevice(outputDesc, |
| getNewOutputDevice(outputDesc, true /*fromCache*/), |
| true, |
| 0, |
| NULL); |
| } else if (patch->sources[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| if (patch->sinks[0].type == AUDIO_PORT_TYPE_MIX) { |
| sp<AudioInputDescriptor> inputDesc = mInputs.getInputFromId(patch->sinks[0].id); |
| if (inputDesc == NULL) { |
| ALOGV("releaseAudioPatch() input not found for id %d", patch->sinks[0].id); |
| return BAD_VALUE; |
| } |
| setInputDevice(inputDesc->mIoHandle, |
| getNewInputDevice(inputDesc), |
| true, |
| NULL); |
| } else if (patch->sinks[0].type == AUDIO_PORT_TYPE_DEVICE) { |
| status_t status = mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| ALOGV("releaseAudioPatch() patch panel returned %d patchHandle %d", |
| status, patchDesc->mAfPatchHandle); |
| removeAudioPatch(patchDesc->mHandle); |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } else { |
| return BAD_VALUE; |
| } |
| } else { |
| return BAD_VALUE; |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::listAudioPatches(unsigned int *num_patches, |
| struct audio_patch *patches, |
| unsigned int *generation) |
| { |
| if (generation == NULL) { |
| return BAD_VALUE; |
| } |
| *generation = curAudioPortGeneration(); |
| return mAudioPatches.listAudioPatches(num_patches, patches); |
| } |
| |
| status_t AudioPolicyManager::setAudioPortConfig(const struct audio_port_config *config) |
| { |
| ALOGV("setAudioPortConfig()"); |
| |
| if (config == NULL) { |
| return BAD_VALUE; |
| } |
| ALOGV("setAudioPortConfig() on port handle %d", config->id); |
| // Only support gain configuration for now |
| if (config->config_mask != AUDIO_PORT_CONFIG_GAIN) { |
| return INVALID_OPERATION; |
| } |
| |
| sp<AudioPortConfig> audioPortConfig; |
| if (config->type == AUDIO_PORT_TYPE_MIX) { |
| if (config->role == AUDIO_PORT_ROLE_SOURCE) { |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.getOutputFromId(config->id); |
| if (outputDesc == NULL) { |
| return BAD_VALUE; |
| } |
| ALOG_ASSERT(!outputDesc->isDuplicated(), |
| "setAudioPortConfig() called on duplicated output %d", |
| outputDesc->mIoHandle); |
| audioPortConfig = outputDesc; |
| } else if (config->role == AUDIO_PORT_ROLE_SINK) { |
| sp<AudioInputDescriptor> inputDesc = mInputs.getInputFromId(config->id); |
| if (inputDesc == NULL) { |
| return BAD_VALUE; |
| } |
| audioPortConfig = inputDesc; |
| } else { |
| return BAD_VALUE; |
| } |
| } else if (config->type == AUDIO_PORT_TYPE_DEVICE) { |
| sp<DeviceDescriptor> deviceDesc; |
| if (config->role == AUDIO_PORT_ROLE_SOURCE) { |
| deviceDesc = mAvailableInputDevices.getDeviceFromId(config->id); |
| } else if (config->role == AUDIO_PORT_ROLE_SINK) { |
| deviceDesc = mAvailableOutputDevices.getDeviceFromId(config->id); |
| } else { |
| return BAD_VALUE; |
| } |
| if (deviceDesc == NULL) { |
| return BAD_VALUE; |
| } |
| audioPortConfig = deviceDesc; |
| } else { |
| return BAD_VALUE; |
| } |
| |
| struct audio_port_config backupConfig; |
| status_t status = audioPortConfig->applyAudioPortConfig(config, &backupConfig); |
| if (status == NO_ERROR) { |
| struct audio_port_config newConfig; |
| audioPortConfig->toAudioPortConfig(&newConfig, config); |
| status = mpClientInterface->setAudioPortConfig(&newConfig, 0); |
| } |
| if (status != NO_ERROR) { |
| audioPortConfig->applyAudioPortConfig(&backupConfig); |
| } |
| |
| return status; |
| } |
| |
| void AudioPolicyManager::releaseResourcesForUid(uid_t uid) |
| { |
| clearAudioSources(uid); |
| clearAudioPatches(uid); |
| clearSessionRoutes(uid); |
| } |
| |
| void AudioPolicyManager::clearAudioPatches(uid_t uid) |
| { |
| for (ssize_t i = (ssize_t)mAudioPatches.size() - 1; i >= 0; i--) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(i); |
| if (patchDesc->mUid == uid) { |
| releaseAudioPatch(mAudioPatches.keyAt(i), uid); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::checkStrategyRoute(routing_strategy strategy, |
| audio_io_handle_t ouptutToSkip) |
| { |
| audio_devices_t device = getDeviceForStrategy(strategy, false /*fromCache*/); |
| SortedVector<audio_io_handle_t> outputs = getOutputsForDevice(device, mOutputs); |
| for (size_t j = 0; j < mOutputs.size(); j++) { |
| if (mOutputs.keyAt(j) == ouptutToSkip) { |
| continue; |
| } |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueAt(j); |
| if (!isStrategyActive(outputDesc, (routing_strategy)strategy)) { |
| continue; |
| } |
| // If the default device for this strategy is on another output mix, |
| // invalidate all tracks in this strategy to force re connection. |
| // Otherwise select new device on the output mix. |
| if (outputs.indexOf(mOutputs.keyAt(j)) < 0) { |
| for (int stream = 0; stream < AUDIO_STREAM_FOR_POLICY_CNT; stream++) { |
| if (getStrategy((audio_stream_type_t)stream) == strategy) { |
| mpClientInterface->invalidateStream((audio_stream_type_t)stream); |
| } |
| } |
| } else { |
| audio_devices_t newDevice = getNewOutputDevice(outputDesc, false /*fromCache*/); |
| setOutputDevice(outputDesc, newDevice, false); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::clearSessionRoutes(uid_t uid) |
| { |
| // remove output routes associated with this uid |
| SortedVector<routing_strategy> affectedStrategies; |
| for (ssize_t i = (ssize_t)mOutputRoutes.size() - 1; i >= 0; i--) { |
| sp<SessionRoute> route = mOutputRoutes.valueAt(i); |
| if (route->mUid == uid) { |
| mOutputRoutes.removeItemsAt(i); |
| if (route->mDeviceDescriptor != 0) { |
| affectedStrategies.add(getStrategy(route->mStreamType)); |
| } |
| } |
| } |
| // reroute outputs if necessary |
| for (size_t i = 0; i < affectedStrategies.size(); i++) { |
| checkStrategyRoute(affectedStrategies[i], AUDIO_IO_HANDLE_NONE); |
| } |
| |
| // remove input routes associated with this uid |
| SortedVector<audio_source_t> affectedSources; |
| for (ssize_t i = (ssize_t)mInputRoutes.size() - 1; i >= 0; i--) { |
| sp<SessionRoute> route = mInputRoutes.valueAt(i); |
| if (route->mUid == uid) { |
| mInputRoutes.removeItemsAt(i); |
| if (route->mDeviceDescriptor != 0) { |
| affectedSources.add(route->mSource); |
| } |
| } |
| } |
| // reroute inputs if necessary |
| SortedVector<audio_io_handle_t> inputsToClose; |
| for (size_t i = 0; i < mInputs.size(); i++) { |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueAt(i); |
| if (affectedSources.indexOf(inputDesc->inputSource()) >= 0) { |
| inputsToClose.add(inputDesc->mIoHandle); |
| } |
| } |
| for (size_t i = 0; i < inputsToClose.size(); i++) { |
| closeInput(inputsToClose[i]); |
| } |
| } |
| |
| void AudioPolicyManager::clearAudioSources(uid_t uid) |
| { |
| for (ssize_t i = (ssize_t)mAudioSources.size() - 1; i >= 0; i--) { |
| sp<AudioSourceDescriptor> sourceDesc = mAudioSources.valueAt(i); |
| if (sourceDesc->mUid == uid) { |
| stopAudioSource(mAudioSources.keyAt(i)); |
| } |
| } |
| } |
| |
| status_t AudioPolicyManager::acquireSoundTriggerSession(audio_session_t *session, |
| audio_io_handle_t *ioHandle, |
| audio_devices_t *device) |
| { |
| *session = (audio_session_t)mpClientInterface->newAudioUniqueId(AUDIO_UNIQUE_ID_USE_SESSION); |
| *ioHandle = (audio_io_handle_t)mpClientInterface->newAudioUniqueId(AUDIO_UNIQUE_ID_USE_INPUT); |
| *device = getDeviceAndMixForInputSource(AUDIO_SOURCE_HOTWORD); |
| |
| return mSoundTriggerSessions.acquireSession(*session, *ioHandle); |
| } |
| |
| status_t AudioPolicyManager::startAudioSource(const struct audio_port_config *source, |
| const audio_attributes_t *attributes, |
| audio_patch_handle_t *handle, |
| uid_t uid) |
| { |
| ALOGV("%s source %p attributes %p handle %p", __FUNCTION__, source, attributes, handle); |
| if (source == NULL || attributes == NULL || handle == NULL) { |
| return BAD_VALUE; |
| } |
| |
| *handle = AUDIO_PATCH_HANDLE_NONE; |
| |
| if (source->role != AUDIO_PORT_ROLE_SOURCE || |
| source->type != AUDIO_PORT_TYPE_DEVICE) { |
| ALOGV("%s INVALID_OPERATION source->role %d source->type %d", __FUNCTION__, source->role, source->type); |
| return INVALID_OPERATION; |
| } |
| |
| sp<DeviceDescriptor> srcDeviceDesc = |
| mAvailableInputDevices.getDevice(source->ext.device.type, |
| String8(source->ext.device.address)); |
| if (srcDeviceDesc == 0) { |
| ALOGV("%s source->ext.device.type %08x not found", __FUNCTION__, source->ext.device.type); |
| return BAD_VALUE; |
| } |
| sp<AudioSourceDescriptor> sourceDesc = |
| new AudioSourceDescriptor(srcDeviceDesc, attributes, uid); |
| |
| struct audio_patch dummyPatch; |
| sp<AudioPatch> patchDesc = new AudioPatch(&dummyPatch, uid); |
| sourceDesc->mPatchDesc = patchDesc; |
| |
| status_t status = connectAudioSource(sourceDesc); |
| if (status == NO_ERROR) { |
| mAudioSources.add(sourceDesc->getHandle(), sourceDesc); |
| *handle = sourceDesc->getHandle(); |
| } |
| return status; |
| } |
| |
| status_t AudioPolicyManager::connectAudioSource(const sp<AudioSourceDescriptor>& sourceDesc) |
| { |
| ALOGV("%s handle %d", __FUNCTION__, sourceDesc->getHandle()); |
| |
| // make sure we only have one patch per source. |
| disconnectAudioSource(sourceDesc); |
| |
| routing_strategy strategy = (routing_strategy) getStrategyForAttr(&sourceDesc->mAttributes); |
| audio_stream_type_t stream = streamTypefromAttributesInt(&sourceDesc->mAttributes); |
| sp<DeviceDescriptor> srcDeviceDesc = sourceDesc->mDevice; |
| |
| audio_devices_t sinkDevice = getDeviceForStrategy(strategy, true); |
| sp<DeviceDescriptor> sinkDeviceDesc = |
| mAvailableOutputDevices.getDevice(sinkDevice, String8("")); |
| |
| audio_patch_handle_t afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| struct audio_patch *patch = &sourceDesc->mPatchDesc->mPatch; |
| |
| if (srcDeviceDesc->getAudioPort()->mModule->getHandle() == |
| sinkDeviceDesc->getAudioPort()->mModule->getHandle() && |
| srcDeviceDesc->getAudioPort()->mModule->getHalVersionMajor() >= 3 && |
| srcDeviceDesc->getAudioPort()->mGains.size() > 0) { |
| ALOGV("%s AUDIO_DEVICE_API_VERSION_3_0", __FUNCTION__); |
| // create patch between src device and output device |
| // create Hwoutput and add to mHwOutputs |
| } else { |
| SortedVector<audio_io_handle_t> outputs = getOutputsForDevice(sinkDevice, mOutputs); |
| audio_io_handle_t output = |
| selectOutput(outputs, AUDIO_OUTPUT_FLAG_NONE, AUDIO_FORMAT_INVALID); |
| if (output == AUDIO_IO_HANDLE_NONE) { |
| ALOGV("%s no output for device %08x", __FUNCTION__, sinkDevice); |
| return INVALID_OPERATION; |
| } |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueFor(output); |
| if (outputDesc->isDuplicated()) { |
| ALOGV("%s output for device %08x is duplicated", __FUNCTION__, sinkDevice); |
| return INVALID_OPERATION; |
| } |
| // create a special patch with no sink and two sources: |
| // - the second source indicates to PatchPanel through which output mix this patch should |
| // be connected as well as the stream type for volume control |
| // - the sink is defined by whatever output device is currently selected for the output |
| // though which this patch is routed. |
| patch->num_sinks = 0; |
| patch->num_sources = 2; |
| srcDeviceDesc->toAudioPortConfig(&patch->sources[0], NULL); |
| outputDesc->toAudioPortConfig(&patch->sources[1], NULL); |
| patch->sources[1].ext.mix.usecase.stream = stream; |
| status_t status = mpClientInterface->createAudioPatch(patch, |
| &afPatchHandle, |
| 0); |
| ALOGV("%s patch panel returned %d patchHandle %d", __FUNCTION__, |
| status, afPatchHandle); |
| if (status != NO_ERROR) { |
| ALOGW("%s patch panel could not connect device patch, error %d", |
| __FUNCTION__, status); |
| return INVALID_OPERATION; |
| } |
| uint32_t delayMs = 0; |
| status = startSource(outputDesc, stream, sinkDevice, NULL, &delayMs); |
| |
| if (status != NO_ERROR) { |
| mpClientInterface->releaseAudioPatch(sourceDesc->mPatchDesc->mAfPatchHandle, 0); |
| return status; |
| } |
| sourceDesc->mSwOutput = outputDesc; |
| if (delayMs != 0) { |
| usleep(delayMs * 1000); |
| } |
| } |
| |
| sourceDesc->mPatchDesc->mAfPatchHandle = afPatchHandle; |
| addAudioPatch(sourceDesc->mPatchDesc->mHandle, sourceDesc->mPatchDesc); |
| |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::stopAudioSource(audio_patch_handle_t handle __unused) |
| { |
| sp<AudioSourceDescriptor> sourceDesc = mAudioSources.valueFor(handle); |
| ALOGV("%s handle %d", __FUNCTION__, handle); |
| if (sourceDesc == 0) { |
| ALOGW("%s unknown source for handle %d", __FUNCTION__, handle); |
| return BAD_VALUE; |
| } |
| status_t status = disconnectAudioSource(sourceDesc); |
| |
| mAudioSources.removeItem(handle); |
| return status; |
| } |
| |
| status_t AudioPolicyManager::setMasterMono(bool mono) |
| { |
| if (mMasterMono == mono) { |
| return NO_ERROR; |
| } |
| mMasterMono = mono; |
| // if enabling mono we close all offloaded devices, which will invalidate the |
| // corresponding AudioTrack. The AudioTrack client/MediaPlayer is responsible |
| // for recreating the new AudioTrack as non-offloaded PCM. |
| // |
| // If disabling mono, we leave all tracks as is: we don't know which clients |
| // and tracks are able to be recreated as offloaded. The next "song" should |
| // play back offloaded. |
| if (mMasterMono) { |
| Vector<audio_io_handle_t> offloaded; |
| for (size_t i = 0; i < mOutputs.size(); ++i) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if (desc->mFlags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) { |
| offloaded.push(desc->mIoHandle); |
| } |
| } |
| for (size_t i = 0; i < offloaded.size(); ++i) { |
| closeOutput(offloaded[i]); |
| } |
| } |
| // update master mono for all remaining outputs |
| for (size_t i = 0; i < mOutputs.size(); ++i) { |
| updateMono(mOutputs.keyAt(i)); |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::getMasterMono(bool *mono) |
| { |
| *mono = mMasterMono; |
| return NO_ERROR; |
| } |
| |
| float AudioPolicyManager::getStreamVolumeDB( |
| audio_stream_type_t stream, int index, audio_devices_t device) |
| { |
| return computeVolume(stream, index, device); |
| } |
| |
| status_t AudioPolicyManager::disconnectAudioSource(const sp<AudioSourceDescriptor>& sourceDesc) |
| { |
| ALOGV("%s handle %d", __FUNCTION__, sourceDesc->getHandle()); |
| |
| sp<AudioPatch> patchDesc = mAudioPatches.valueFor(sourceDesc->mPatchDesc->mHandle); |
| if (patchDesc == 0) { |
| ALOGW("%s source has no patch with handle %d", __FUNCTION__, |
| sourceDesc->mPatchDesc->mHandle); |
| return BAD_VALUE; |
| } |
| removeAudioPatch(sourceDesc->mPatchDesc->mHandle); |
| |
| audio_stream_type_t stream = streamTypefromAttributesInt(&sourceDesc->mAttributes); |
| sp<SwAudioOutputDescriptor> swOutputDesc = sourceDesc->mSwOutput.promote(); |
| if (swOutputDesc != 0) { |
| stopSource(swOutputDesc, stream, false); |
| mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| } else { |
| sp<HwAudioOutputDescriptor> hwOutputDesc = sourceDesc->mHwOutput.promote(); |
| if (hwOutputDesc != 0) { |
| // release patch between src device and output device |
| // close Hwoutput and remove from mHwOutputs |
| } else { |
| ALOGW("%s source has neither SW nor HW output", __FUNCTION__); |
| } |
| } |
| return NO_ERROR; |
| } |
| |
| sp<AudioSourceDescriptor> AudioPolicyManager::getSourceForStrategyOnOutput( |
| audio_io_handle_t output, routing_strategy strategy) |
| { |
| sp<AudioSourceDescriptor> source; |
| for (size_t i = 0; i < mAudioSources.size(); i++) { |
| sp<AudioSourceDescriptor> sourceDesc = mAudioSources.valueAt(i); |
| routing_strategy sourceStrategy = |
| (routing_strategy) getStrategyForAttr(&sourceDesc->mAttributes); |
| sp<SwAudioOutputDescriptor> outputDesc = sourceDesc->mSwOutput.promote(); |
| if (sourceStrategy == strategy && outputDesc != 0 && outputDesc->mIoHandle == output) { |
| source = sourceDesc; |
| break; |
| } |
| } |
| return source; |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // AudioPolicyManager |
| // ---------------------------------------------------------------------------- |
| uint32_t AudioPolicyManager::nextAudioPortGeneration() |
| { |
| return android_atomic_inc(&mAudioPortGeneration); |
| } |
| |
| #ifdef USE_XML_AUDIO_POLICY_CONF |
| // Treblized audio policy xml config will be located in /odm/etc or /vendor/etc. |
| static const char *kConfigLocationList[] = |
| {"/odm/etc", "/vendor/etc", "/system/etc"}; |
| static const int kConfigLocationListSize = |
| (sizeof(kConfigLocationList) / sizeof(kConfigLocationList[0])); |
| |
| static status_t deserializeAudioPolicyXmlConfig(AudioPolicyConfig &config) { |
| char audioPolicyXmlConfigFile[AUDIO_POLICY_XML_CONFIG_FILE_PATH_MAX_LENGTH]; |
| status_t ret; |
| |
| for (int i = 0; i < kConfigLocationListSize; i++) { |
| PolicySerializer serializer; |
| snprintf(audioPolicyXmlConfigFile, |
| sizeof(audioPolicyXmlConfigFile), |
| "%s/%s", |
| kConfigLocationList[i], |
| AUDIO_POLICY_XML_CONFIG_FILE_NAME); |
| ret = serializer.deserialize(audioPolicyXmlConfigFile, config); |
| if (ret == NO_ERROR) { |
| break; |
| } |
| } |
| return ret; |
| } |
| #endif |
| |
| AudioPolicyManager::AudioPolicyManager(AudioPolicyClientInterface *clientInterface) |
| : |
| mLimitRingtoneVolume(false), mLastVoiceVolume(-1.0f), |
| mA2dpSuspended(false), |
| mAudioPortGeneration(1), |
| mBeaconMuteRefCount(0), |
| mBeaconPlayingRefCount(0), |
| mBeaconMuted(false), |
| mTtsOutputAvailable(false), |
| mMasterMono(false), |
| mMusicEffectOutput(AUDIO_IO_HANDLE_NONE), |
| mHasComputedSoundTriggerSupportsConcurrentCapture(false) |
| { |
| mUidCached = getuid(); |
| mpClientInterface = clientInterface; |
| |
| // TODO: remove when legacy conf file is removed. true on devices that use DRC on the |
| // DEVICE_CATEGORY_SPEAKER path to boost soft sounds, used to adjust volume curves accordingly. |
| // Note: remove also speaker_drc_enabled from global configuration of XML config file. |
| bool speakerDrcEnabled = false; |
| |
| #ifdef USE_XML_AUDIO_POLICY_CONF |
| mVolumeCurves = new VolumeCurvesCollection(); |
| AudioPolicyConfig config(mHwModules, mAvailableOutputDevices, mAvailableInputDevices, |
| mDefaultOutputDevice, speakerDrcEnabled, |
| static_cast<VolumeCurvesCollection *>(mVolumeCurves)); |
| if (deserializeAudioPolicyXmlConfig(config) != NO_ERROR) { |
| #else |
| mVolumeCurves = new StreamDescriptorCollection(); |
| AudioPolicyConfig config(mHwModules, mAvailableOutputDevices, mAvailableInputDevices, |
| mDefaultOutputDevice, speakerDrcEnabled); |
| if ((ConfigParsingUtils::loadConfig(AUDIO_POLICY_VENDOR_CONFIG_FILE, config) != NO_ERROR) && |
| (ConfigParsingUtils::loadConfig(AUDIO_POLICY_CONFIG_FILE, config) != NO_ERROR)) { |
| #endif |
| ALOGE("could not load audio policy configuration file, setting defaults"); |
| config.setDefault(); |
| } |
| // must be done after reading the policy (since conditionned by Speaker Drc Enabling) |
| mVolumeCurves->initializeVolumeCurves(speakerDrcEnabled); |
| |
| // Once policy config has been parsed, retrieve an instance of the engine and initialize it. |
| audio_policy::EngineInstance *engineInstance = audio_policy::EngineInstance::getInstance(); |
| if (!engineInstance) { |
| ALOGE("%s: Could not get an instance of policy engine", __FUNCTION__); |
| return; |
| } |
| // Retrieve the Policy Manager Interface |
| mEngine = engineInstance->queryInterface<AudioPolicyManagerInterface>(); |
| if (mEngine == NULL) { |
| ALOGE("%s: Failed to get Policy Engine Interface", __FUNCTION__); |
| return; |
| } |
| mEngine->setObserver(this); |
| status_t status = mEngine->initCheck(); |
| (void) status; |
| ALOG_ASSERT(status == NO_ERROR, "Policy engine not initialized(err=%d)", status); |
| |
| // mAvailableOutputDevices and mAvailableInputDevices now contain all attached devices |
| // open all output streams needed to access attached devices |
| audio_devices_t outputDeviceTypes = mAvailableOutputDevices.types(); |
| audio_devices_t inputDeviceTypes = mAvailableInputDevices.types() & ~AUDIO_DEVICE_BIT_IN; |
| for (size_t i = 0; i < mHwModules.size(); i++) { |
| mHwModules[i]->mHandle = mpClientInterface->loadHwModule(mHwModules[i]->getName()); |
| if (mHwModules[i]->mHandle == 0) { |
| ALOGW("could not open HW module %s", mHwModules[i]->getName()); |
| continue; |
| } |
| // open all output streams needed to access attached devices |
| // except for direct output streams that are only opened when they are actually |
| // required by an app. |
| // This also validates mAvailableOutputDevices list |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) |
| { |
| const sp<IOProfile> outProfile = mHwModules[i]->mOutputProfiles[j]; |
| |
| if (!outProfile->hasSupportedDevices()) { |
| ALOGW("Output profile contains no device on module %s", mHwModules[i]->getName()); |
| continue; |
| } |
| if ((outProfile->getFlags() & AUDIO_OUTPUT_FLAG_TTS) != 0) { |
| mTtsOutputAvailable = true; |
| } |
| |
| if ((outProfile->getFlags() & AUDIO_OUTPUT_FLAG_DIRECT) != 0) { |
| continue; |
| } |
| audio_devices_t profileType = outProfile->getSupportedDevicesType(); |
| if ((profileType & mDefaultOutputDevice->type()) != AUDIO_DEVICE_NONE) { |
| profileType = mDefaultOutputDevice->type(); |
| } else { |
| // chose first device present in profile's SupportedDevices also part of |
| // outputDeviceTypes |
| profileType = outProfile->getSupportedDeviceForType(outputDeviceTypes); |
| } |
| if ((profileType & outputDeviceTypes) == 0) { |
| continue; |
| } |
| sp<SwAudioOutputDescriptor> outputDesc = new SwAudioOutputDescriptor(outProfile, |
| mpClientInterface); |
| const DeviceVector &supportedDevices = outProfile->getSupportedDevices(); |
| const DeviceVector &devicesForType = supportedDevices.getDevicesFromType(profileType); |
| String8 address = devicesForType.size() > 0 ? devicesForType.itemAt(0)->mAddress |
| : String8(""); |
| |
| outputDesc->mDevice = profileType; |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = outputDesc->mSamplingRate; |
| config.channel_mask = outputDesc->mChannelMask; |
| config.format = outputDesc->mFormat; |
| audio_io_handle_t output = AUDIO_IO_HANDLE_NONE; |
| status_t status = mpClientInterface->openOutput(outProfile->getModuleHandle(), |
| &output, |
| &config, |
| &outputDesc->mDevice, |
| address, |
| &outputDesc->mLatency, |
| outputDesc->mFlags); |
| |
| if (status != NO_ERROR) { |
| ALOGW("Cannot open output stream for device %08x on hw module %s", |
| outputDesc->mDevice, |
| mHwModules[i]->getName()); |
| } else { |
| outputDesc->mSamplingRate = config.sample_rate; |
| outputDesc->mChannelMask = config.channel_mask; |
| outputDesc->mFormat = config.format; |
| |
| for (size_t k = 0; k < supportedDevices.size(); k++) { |
| ssize_t index = mAvailableOutputDevices.indexOf(supportedDevices[k]); |
| // give a valid ID to an attached device once confirmed it is reachable |
| if (index >= 0 && !mAvailableOutputDevices[index]->isAttached()) { |
| mAvailableOutputDevices[index]->attach(mHwModules[i]); |
| } |
| } |
| if (mPrimaryOutput == 0 && |
| outProfile->getFlags() & AUDIO_OUTPUT_FLAG_PRIMARY) { |
| mPrimaryOutput = outputDesc; |
| } |
| addOutput(output, outputDesc); |
| setOutputDevice(outputDesc, |
| outputDesc->mDevice, |
| true, |
| 0, |
| NULL, |
| address.string()); |
| } |
| } |
| // open input streams needed to access attached devices to validate |
| // mAvailableInputDevices list |
| for (size_t j = 0; j < mHwModules[i]->mInputProfiles.size(); j++) |
| { |
| const sp<IOProfile> inProfile = mHwModules[i]->mInputProfiles[j]; |
| |
| if (!inProfile->hasSupportedDevices()) { |
| ALOGW("Input profile contains no device on module %s", mHwModules[i]->getName()); |
| continue; |
| } |
| // chose first device present in profile's SupportedDevices also part of |
| // inputDeviceTypes |
| audio_devices_t profileType = inProfile->getSupportedDeviceForType(inputDeviceTypes); |
| |
| if ((profileType & inputDeviceTypes) == 0) { |
| continue; |
| } |
| sp<AudioInputDescriptor> inputDesc = |
| new AudioInputDescriptor(inProfile); |
| |
| inputDesc->mDevice = profileType; |
| |
| // find the address |
| DeviceVector inputDevices = mAvailableInputDevices.getDevicesFromType(profileType); |
| // the inputs vector must be of size 1, but we don't want to crash here |
| String8 address = inputDevices.size() > 0 ? inputDevices.itemAt(0)->mAddress |
| : String8(""); |
| ALOGV(" for input device 0x%x using address %s", profileType, address.string()); |
| ALOGE_IF(inputDevices.size() == 0, "Input device list is empty!"); |
| |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = inputDesc->mSamplingRate; |
| config.channel_mask = inputDesc->mChannelMask; |
| config.format = inputDesc->mFormat; |
| audio_io_handle_t input = AUDIO_IO_HANDLE_NONE; |
| status_t status = mpClientInterface->openInput(inProfile->getModuleHandle(), |
| &input, |
| &config, |
| &inputDesc->mDevice, |
| address, |
| AUDIO_SOURCE_MIC, |
| AUDIO_INPUT_FLAG_NONE); |
| |
| if (status == NO_ERROR) { |
| const DeviceVector &supportedDevices = inProfile->getSupportedDevices(); |
| for (size_t k = 0; k < supportedDevices.size(); k++) { |
| ssize_t index = mAvailableInputDevices.indexOf(supportedDevices[k]); |
| // give a valid ID to an attached device once confirmed it is reachable |
| if (index >= 0) { |
| sp<DeviceDescriptor> devDesc = mAvailableInputDevices[index]; |
| if (!devDesc->isAttached()) { |
| devDesc->attach(mHwModules[i]); |
| devDesc->importAudioPort(inProfile, true); |
| } |
| } |
| } |
| mpClientInterface->closeInput(input); |
| } else { |
| ALOGW("Cannot open input stream for device %08x on hw module %s", |
| inputDesc->mDevice, |
| mHwModules[i]->getName()); |
| } |
| } |
| } |
| // make sure all attached devices have been allocated a unique ID |
| for (size_t i = 0; i < mAvailableOutputDevices.size();) { |
| if (!mAvailableOutputDevices[i]->isAttached()) { |
| ALOGW("Output device %08x unreachable", mAvailableOutputDevices[i]->type()); |
| mAvailableOutputDevices.remove(mAvailableOutputDevices[i]); |
| continue; |
| } |
| // The device is now validated and can be appended to the available devices of the engine |
| mEngine->setDeviceConnectionState(mAvailableOutputDevices[i], |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE); |
| i++; |
| } |
| for (size_t i = 0; i < mAvailableInputDevices.size();) { |
| if (!mAvailableInputDevices[i]->isAttached()) { |
| ALOGW("Input device %08x unreachable", mAvailableInputDevices[i]->type()); |
| mAvailableInputDevices.remove(mAvailableInputDevices[i]); |
| continue; |
| } |
| // The device is now validated and can be appended to the available devices of the engine |
| mEngine->setDeviceConnectionState(mAvailableInputDevices[i], |
| AUDIO_POLICY_DEVICE_STATE_AVAILABLE); |
| i++; |
| } |
| // make sure default device is reachable |
| if (mDefaultOutputDevice == 0 || mAvailableOutputDevices.indexOf(mDefaultOutputDevice) < 0) { |
| ALOGE("Default device %08x is unreachable", mDefaultOutputDevice->type()); |
| } |
| |
| ALOGE_IF((mPrimaryOutput == 0), "Failed to open primary output"); |
| |
| updateDevicesAndOutputs(); |
| } |
| |
| AudioPolicyManager::~AudioPolicyManager() |
| { |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| mpClientInterface->closeOutput(mOutputs.keyAt(i)); |
| } |
| for (size_t i = 0; i < mInputs.size(); i++) { |
| mpClientInterface->closeInput(mInputs.keyAt(i)); |
| } |
| mAvailableOutputDevices.clear(); |
| mAvailableInputDevices.clear(); |
| mOutputs.clear(); |
| mInputs.clear(); |
| mHwModules.clear(); |
| } |
| |
| status_t AudioPolicyManager::initCheck() |
| { |
| return hasPrimaryOutput() ? NO_ERROR : NO_INIT; |
| } |
| |
| // --- |
| |
| void AudioPolicyManager::addOutput(audio_io_handle_t output, const sp<SwAudioOutputDescriptor>& outputDesc) |
| { |
| outputDesc->setIoHandle(output); |
| mOutputs.add(output, outputDesc); |
| updateMono(output); // update mono status when adding to output list |
| selectOutputForMusicEffects(); |
| nextAudioPortGeneration(); |
| } |
| |
| void AudioPolicyManager::removeOutput(audio_io_handle_t output) |
| { |
| mOutputs.removeItem(output); |
| selectOutputForMusicEffects(); |
| } |
| |
| void AudioPolicyManager::addInput(audio_io_handle_t input, const sp<AudioInputDescriptor>& inputDesc) |
| { |
| inputDesc->setIoHandle(input); |
| mInputs.add(input, inputDesc); |
| nextAudioPortGeneration(); |
| } |
| |
| void AudioPolicyManager::findIoHandlesByAddress(const sp<SwAudioOutputDescriptor>& desc /*in*/, |
| const audio_devices_t device /*in*/, |
| const String8& address /*in*/, |
| SortedVector<audio_io_handle_t>& outputs /*out*/) { |
| sp<DeviceDescriptor> devDesc = |
| desc->mProfile->getSupportedDeviceByAddress(device, address); |
| if (devDesc != 0) { |
| ALOGV("findIoHandlesByAddress(): adding opened output %d on same address %s", |
| desc->mIoHandle, address.string()); |
| outputs.add(desc->mIoHandle); |
| } |
| } |
| |
| status_t AudioPolicyManager::checkOutputsForDevice(const sp<DeviceDescriptor>& devDesc, |
| audio_policy_dev_state_t state, |
| SortedVector<audio_io_handle_t>& outputs, |
| const String8& address) |
| { |
| audio_devices_t device = devDesc->type(); |
| sp<SwAudioOutputDescriptor> desc; |
| |
| if (audio_device_is_digital(device)) { |
| // erase all current sample rates, formats and channel masks |
| devDesc->clearAudioProfiles(); |
| } |
| |
| if (state == AUDIO_POLICY_DEVICE_STATE_AVAILABLE) { |
| // first list already open outputs that can be routed to this device |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| desc = mOutputs.valueAt(i); |
| if (!desc->isDuplicated() && (desc->supportedDevices() & device)) { |
| if (!device_distinguishes_on_address(device)) { |
| ALOGV("checkOutputsForDevice(): adding opened output %d", mOutputs.keyAt(i)); |
| outputs.add(mOutputs.keyAt(i)); |
| } else { |
| ALOGV(" checking address match due to device 0x%x", device); |
| findIoHandlesByAddress(desc, device, address, outputs); |
| } |
| } |
| } |
| // then look for output profiles that can be routed to this device |
| SortedVector< sp<IOProfile> > profiles; |
| for (size_t i = 0; i < mHwModules.size(); i++) |
| { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) |
| { |
| sp<IOProfile> profile = mHwModules[i]->mOutputProfiles[j]; |
| if (profile->supportDevice(device)) { |
| if (!device_distinguishes_on_address(device) || |
| profile->supportDeviceAddress(address)) { |
| profiles.add(profile); |
| ALOGV("checkOutputsForDevice(): adding profile %zu from module %zu", j, i); |
| } |
| } |
| } |
| } |
| |
| ALOGV(" found %zu profiles, %zu outputs", profiles.size(), outputs.size()); |
| |
| if (profiles.isEmpty() && outputs.isEmpty()) { |
| ALOGW("checkOutputsForDevice(): No output available for device %04x", device); |
| return BAD_VALUE; |
| } |
| |
| // open outputs for matching profiles if needed. Direct outputs are also opened to |
| // query for dynamic parameters and will be closed later by setDeviceConnectionState() |
| for (ssize_t profile_index = 0; profile_index < (ssize_t)profiles.size(); profile_index++) { |
| sp<IOProfile> profile = profiles[profile_index]; |
| |
| // nothing to do if one output is already opened for this profile |
| size_t j; |
| for (j = 0; j < outputs.size(); j++) { |
| desc = mOutputs.valueFor(outputs.itemAt(j)); |
| if (!desc->isDuplicated() && desc->mProfile == profile) { |
| // matching profile: save the sample rates, format and channel masks supported |
| // by the profile in our device descriptor |
| if (audio_device_is_digital(device)) { |
| devDesc->importAudioPort(profile); |
| } |
| break; |
| } |
| } |
| if (j != outputs.size()) { |
| continue; |
| } |
| |
| ALOGV("opening output for device %08x with params %s profile %p name %s", |
| device, address.string(), profile.get(), profile->getName().string()); |
| desc = new SwAudioOutputDescriptor(profile, mpClientInterface); |
| desc->mDevice = device; |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = desc->mSamplingRate; |
| config.channel_mask = desc->mChannelMask; |
| config.format = desc->mFormat; |
| config.offload_info.sample_rate = desc->mSamplingRate; |
| config.offload_info.channel_mask = desc->mChannelMask; |
| config.offload_info.format = desc->mFormat; |
| audio_io_handle_t output = AUDIO_IO_HANDLE_NONE; |
| status_t status = mpClientInterface->openOutput(profile->getModuleHandle(), |
| &output, |
| &config, |
| &desc->mDevice, |
| address, |
| &desc->mLatency, |
| desc->mFlags); |
| if (status == NO_ERROR) { |
| desc->mSamplingRate = config.sample_rate; |
| desc->mChannelMask = config.channel_mask; |
| desc->mFormat = config.format; |
| |
| // Here is where the out_set_parameters() for card & device gets called |
| if (!address.isEmpty()) { |
| char *param = audio_device_address_to_parameter(device, address); |
| mpClientInterface->setParameters(output, String8(param)); |
| free(param); |
| } |
| updateAudioProfiles(device, output, profile->getAudioProfiles()); |
| if (!profile->hasValidAudioProfile()) { |
| ALOGW("checkOutputsForDevice() missing param"); |
| mpClientInterface->closeOutput(output); |
| output = AUDIO_IO_HANDLE_NONE; |
| } else if (profile->hasDynamicAudioProfile()) { |
| mpClientInterface->closeOutput(output); |
| output = AUDIO_IO_HANDLE_NONE; |
| profile->pickAudioProfile(config.sample_rate, config.channel_mask, config.format); |
| config.offload_info.sample_rate = config.sample_rate; |
| config.offload_info.channel_mask = config.channel_mask; |
| config.offload_info.format = config.format; |
| status = mpClientInterface->openOutput(profile->getModuleHandle(), |
| &output, |
| &config, |
| &desc->mDevice, |
| address, |
| &desc->mLatency, |
| desc->mFlags); |
| if (status == NO_ERROR) { |
| desc->mSamplingRate = config.sample_rate; |
| desc->mChannelMask = config.channel_mask; |
| desc->mFormat = config.format; |
| } else { |
| output = AUDIO_IO_HANDLE_NONE; |
| } |
| } |
| |
| if (output != AUDIO_IO_HANDLE_NONE) { |
| addOutput(output, desc); |
| if (device_distinguishes_on_address(device) && address != "0") { |
| sp<AudioPolicyMix> policyMix; |
| if (mPolicyMixes.getAudioPolicyMix(address, policyMix) != NO_ERROR) { |
| ALOGE("checkOutputsForDevice() cannot find policy for address %s", |
| address.string()); |
| } |
| policyMix->setOutput(desc); |
| desc->mPolicyMix = policyMix->getMix(); |
| |
| } else if (((desc->mFlags & AUDIO_OUTPUT_FLAG_DIRECT) == 0) && |
| hasPrimaryOutput()) { |
| // no duplicated output for direct outputs and |
| // outputs used by dynamic policy mixes |
| audio_io_handle_t duplicatedOutput = AUDIO_IO_HANDLE_NONE; |
| |
| // set initial stream volume for device |
| applyStreamVolumes(desc, device, 0, true); |
| |
| //TODO: configure audio effect output stage here |
| |
| // open a duplicating output thread for the new output and the primary output |
| duplicatedOutput = |
| mpClientInterface->openDuplicateOutput(output, |
| mPrimaryOutput->mIoHandle); |
| if (duplicatedOutput != AUDIO_IO_HANDLE_NONE) { |
| // add duplicated output descriptor |
| sp<SwAudioOutputDescriptor> dupOutputDesc = |
| new SwAudioOutputDescriptor(NULL, mpClientInterface); |
| dupOutputDesc->mOutput1 = mPrimaryOutput; |
| dupOutputDesc->mOutput2 = desc; |
| dupOutputDesc->mSamplingRate = desc->mSamplingRate; |
| dupOutputDesc->mFormat = desc->mFormat; |
| dupOutputDesc->mChannelMask = desc->mChannelMask; |
| dupOutputDesc->mLatency = desc->mLatency; |
| addOutput(duplicatedOutput, dupOutputDesc); |
| applyStreamVolumes(dupOutputDesc, device, 0, true); |
| } else { |
| ALOGW("checkOutputsForDevice() could not open dup output for %d and %d", |
| mPrimaryOutput->mIoHandle, output); |
| mpClientInterface->closeOutput(output); |
| removeOutput(output); |
| nextAudioPortGeneration(); |
| output = AUDIO_IO_HANDLE_NONE; |
| } |
| } |
| } |
| } else { |
| output = AUDIO_IO_HANDLE_NONE; |
| } |
| if (output == AUDIO_IO_HANDLE_NONE) { |
| ALOGW("checkOutputsForDevice() could not open output for device %x", device); |
| profiles.removeAt(profile_index); |
| profile_index--; |
| } else { |
| outputs.add(output); |
| // Load digital format info only for digital devices |
| if (audio_device_is_digital(device)) { |
| devDesc->importAudioPort(profile); |
| } |
| |
| if (device_distinguishes_on_address(device)) { |
| ALOGV("checkOutputsForDevice(): setOutputDevice(dev=0x%x, addr=%s)", |
| device, address.string()); |
| setOutputDevice(desc, device, true/*force*/, 0/*delay*/, |
| NULL/*patch handle*/, address.string()); |
| } |
| ALOGV("checkOutputsForDevice(): adding output %d", output); |
| } |
| } |
| |
| if (profiles.isEmpty()) { |
| ALOGW("checkOutputsForDevice(): No output available for device %04x", device); |
| return BAD_VALUE; |
| } |
| } else { // Disconnect |
| // check if one opened output is not needed any more after disconnecting one device |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| desc = mOutputs.valueAt(i); |
| if (!desc->isDuplicated()) { |
| // exact match on device |
| if (device_distinguishes_on_address(device) && |
| (desc->supportedDevices() == device)) { |
| findIoHandlesByAddress(desc, device, address, outputs); |
| } else if (!(desc->supportedDevices() & mAvailableOutputDevices.types())) { |
| ALOGV("checkOutputsForDevice(): disconnecting adding output %d", |
| mOutputs.keyAt(i)); |
| outputs.add(mOutputs.keyAt(i)); |
| } |
| } |
| } |
| // Clear any profiles associated with the disconnected device. |
| for (size_t i = 0; i < mHwModules.size(); i++) |
| { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mOutputProfiles.size(); j++) |
| { |
| sp<IOProfile> profile = mHwModules[i]->mOutputProfiles[j]; |
| if (profile->supportDevice(device)) { |
| ALOGV("checkOutputsForDevice(): " |
| "clearing direct output profile %zu on module %zu", j, i); |
| profile->clearAudioProfiles(); |
| } |
| } |
| } |
| } |
| return NO_ERROR; |
| } |
| |
| status_t AudioPolicyManager::checkInputsForDevice(const sp<DeviceDescriptor>& devDesc, |
| audio_policy_dev_state_t state, |
| SortedVector<audio_io_handle_t>& inputs, |
| const String8& address) |
| { |
| audio_devices_t device = devDesc->type(); |
| sp<AudioInputDescriptor> desc; |
| |
| if (audio_device_is_digital(device)) { |
| // erase all current sample rates, formats and channel masks |
| devDesc->clearAudioProfiles(); |
| } |
| |
| if (state == AUDIO_POLICY_DEVICE_STATE_AVAILABLE) { |
| // first list already open inputs that can be routed to this device |
| for (size_t input_index = 0; input_index < mInputs.size(); input_index++) { |
| desc = mInputs.valueAt(input_index); |
| if (desc->mProfile->supportDevice(device)) { |
| ALOGV("checkInputsForDevice(): adding opened input %d", mInputs.keyAt(input_index)); |
| inputs.add(mInputs.keyAt(input_index)); |
| } |
| } |
| |
| // then look for input profiles that can be routed to this device |
| SortedVector< sp<IOProfile> > profiles; |
| for (size_t module_idx = 0; module_idx < mHwModules.size(); module_idx++) |
| { |
| if (mHwModules[module_idx]->mHandle == 0) { |
| continue; |
| } |
| for (size_t profile_index = 0; |
| profile_index < mHwModules[module_idx]->mInputProfiles.size(); |
| profile_index++) |
| { |
| sp<IOProfile> profile = mHwModules[module_idx]->mInputProfiles[profile_index]; |
| |
| if (profile->supportDevice(device)) { |
| if (!device_distinguishes_on_address(device) || |
| profile->supportDeviceAddress(address)) { |
| profiles.add(profile); |
| ALOGV("checkInputsForDevice(): adding profile %zu from module %zu", |
| profile_index, module_idx); |
| } |
| } |
| } |
| } |
| |
| if (profiles.isEmpty() && inputs.isEmpty()) { |
| ALOGW("checkInputsForDevice(): No input available for device 0x%X", device); |
| return BAD_VALUE; |
| } |
| |
| // open inputs for matching profiles if needed. Direct inputs are also opened to |
| // query for dynamic parameters and will be closed later by setDeviceConnectionState() |
| for (ssize_t profile_index = 0; profile_index < (ssize_t)profiles.size(); profile_index++) { |
| |
| sp<IOProfile> profile = profiles[profile_index]; |
| // nothing to do if one input is already opened for this profile |
| size_t input_index; |
| for (input_index = 0; input_index < mInputs.size(); input_index++) { |
| desc = mInputs.valueAt(input_index); |
| if (desc->mProfile == profile) { |
| if (audio_device_is_digital(device)) { |
| devDesc->importAudioPort(profile); |
| } |
| break; |
| } |
| } |
| if (input_index != mInputs.size()) { |
| continue; |
| } |
| |
| ALOGV("opening input for device 0x%X with params %s", device, address.string()); |
| desc = new AudioInputDescriptor(profile); |
| desc->mDevice = device; |
| audio_config_t config = AUDIO_CONFIG_INITIALIZER; |
| config.sample_rate = desc->mSamplingRate; |
| config.channel_mask = desc->mChannelMask; |
| config.format = desc->mFormat; |
| audio_io_handle_t input = AUDIO_IO_HANDLE_NONE; |
| |
| ALOGV("opening inputput for device %08x with params %s profile %p name %s", |
| desc->mDevice, address.string(), profile.get(), profile->getName().string()); |
| |
| status_t status = mpClientInterface->openInput(profile->getModuleHandle(), |
| &input, |
| &config, |
| &desc->mDevice, |
| address, |
| AUDIO_SOURCE_MIC, |
| AUDIO_INPUT_FLAG_NONE /*FIXME*/); |
| |
| if (status == NO_ERROR) { |
| desc->mSamplingRate = config.sample_rate; |
| desc->mChannelMask = config.channel_mask; |
| desc->mFormat = config.format; |
| |
| if (!address.isEmpty()) { |
| char *param = audio_device_address_to_parameter(device, address); |
| mpClientInterface->setParameters(input, String8(param)); |
| free(param); |
| } |
| updateAudioProfiles(device, input, profile->getAudioProfiles()); |
| if (!profile->hasValidAudioProfile()) { |
| ALOGW("checkInputsForDevice() direct input missing param"); |
| mpClientInterface->closeInput(input); |
| input = AUDIO_IO_HANDLE_NONE; |
| } |
| |
| if (input != 0) { |
| addInput(input, desc); |
| } |
| } // endif input != 0 |
| |
| if (input == AUDIO_IO_HANDLE_NONE) { |
| ALOGW("checkInputsForDevice() could not open input for device 0x%X", device); |
| profiles.removeAt(profile_index); |
| profile_index--; |
| } else { |
| inputs.add(input); |
| if (audio_device_is_digital(device)) { |
| devDesc->importAudioPort(profile); |
| } |
| ALOGV("checkInputsForDevice(): adding input %d", input); |
| } |
| } // end scan profiles |
| |
| if (profiles.isEmpty()) { |
| ALOGW("checkInputsForDevice(): No input available for device 0x%X", device); |
| return BAD_VALUE; |
| } |
| } else { |
| // Disconnect |
| // check if one opened input is not needed any more after disconnecting one device |
| for (size_t input_index = 0; input_index < mInputs.size(); input_index++) { |
| desc = mInputs.valueAt(input_index); |
| if (!(desc->mProfile->supportDevice(mAvailableInputDevices.types()))) { |
| ALOGV("checkInputsForDevice(): disconnecting adding input %d", |
| mInputs.keyAt(input_index)); |
| inputs.add(mInputs.keyAt(input_index)); |
| } |
| } |
| // Clear any profiles associated with the disconnected device. |
| for (size_t module_index = 0; module_index < mHwModules.size(); module_index++) { |
| if (mHwModules[module_index]->mHandle == 0) { |
| continue; |
| } |
| for (size_t profile_index = 0; |
| profile_index < mHwModules[module_index]->mInputProfiles.size(); |
| profile_index++) { |
| sp<IOProfile> profile = mHwModules[module_index]->mInputProfiles[profile_index]; |
| if (profile->supportDevice(device)) { |
| ALOGV("checkInputsForDevice(): clearing direct input profile %zu on module %zu", |
| profile_index, module_index); |
| profile->clearAudioProfiles(); |
| } |
| } |
| } |
| } // end disconnect |
| |
| return NO_ERROR; |
| } |
| |
| |
| void AudioPolicyManager::closeOutput(audio_io_handle_t output) |
| { |
| ALOGV("closeOutput(%d)", output); |
| |
| sp<SwAudioOutputDescriptor> outputDesc = mOutputs.valueFor(output); |
| if (outputDesc == NULL) { |
| ALOGW("closeOutput() unknown output %d", output); |
| return; |
| } |
| mPolicyMixes.closeOutput(outputDesc); |
| |
| // look for duplicated outputs connected to the output being removed. |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> dupOutputDesc = mOutputs.valueAt(i); |
| if (dupOutputDesc->isDuplicated() && |
| (dupOutputDesc->mOutput1 == outputDesc || |
| dupOutputDesc->mOutput2 == outputDesc)) { |
| sp<AudioOutputDescriptor> outputDesc2; |
| if (dupOutputDesc->mOutput1 == outputDesc) { |
| outputDesc2 = dupOutputDesc->mOutput2; |
| } else { |
| outputDesc2 = dupOutputDesc->mOutput1; |
| } |
| // As all active tracks on duplicated output will be deleted, |
| // and as they were also referenced on the other output, the reference |
| // count for their stream type must be adjusted accordingly on |
| // the other output. |
| for (int j = 0; j < AUDIO_STREAM_CNT; j++) { |
| int refCount = dupOutputDesc->mRefCount[j]; |
| outputDesc2->changeRefCount((audio_stream_type_t)j,-refCount); |
| } |
| audio_io_handle_t duplicatedOutput = mOutputs.keyAt(i); |
| ALOGV("closeOutput() closing also duplicated output %d", duplicatedOutput); |
| |
| mpClientInterface->closeOutput(duplicatedOutput); |
| removeOutput(duplicatedOutput); |
| } |
| } |
| |
| nextAudioPortGeneration(); |
| |
| ssize_t index = mAudioPatches.indexOfKey(outputDesc->getPatchHandle()); |
| if (index >= 0) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| (void) /*status_t status*/ mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| mAudioPatches.removeItemsAt(index); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } |
| |
| AudioParameter param; |
| param.add(String8("closing"), String8("true")); |
| mpClientInterface->setParameters(output, param.toString()); |
| |
| mpClientInterface->closeOutput(output); |
| removeOutput(output); |
| mPreviousOutputs = mOutputs; |
| } |
| |
| void AudioPolicyManager::closeInput(audio_io_handle_t input) |
| { |
| ALOGV("closeInput(%d)", input); |
| |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueFor(input); |
| if (inputDesc == NULL) { |
| ALOGW("closeInput() unknown input %d", input); |
| return; |
| } |
| |
| nextAudioPortGeneration(); |
| |
| ssize_t index = mAudioPatches.indexOfKey(inputDesc->getPatchHandle()); |
| if (index >= 0) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| (void) /*status_t status*/ mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| mAudioPatches.removeItemsAt(index); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } |
| |
| mpClientInterface->closeInput(input); |
| mInputs.removeItem(input); |
| } |
| |
| SortedVector<audio_io_handle_t> AudioPolicyManager::getOutputsForDevice( |
| audio_devices_t device, |
| const SwAudioOutputCollection& openOutputs) |
| { |
| SortedVector<audio_io_handle_t> outputs; |
| |
| ALOGVV("getOutputsForDevice() device %04x", device); |
| for (size_t i = 0; i < openOutputs.size(); i++) { |
| ALOGVV("output %zu isDuplicated=%d device=%04x", |
| i, openOutputs.valueAt(i)->isDuplicated(), |
| openOutputs.valueAt(i)->supportedDevices()); |
| if ((device & openOutputs.valueAt(i)->supportedDevices()) == device) { |
| ALOGVV("getOutputsForDevice() found output %d", openOutputs.keyAt(i)); |
| outputs.add(openOutputs.keyAt(i)); |
| } |
| } |
| return outputs; |
| } |
| |
| bool AudioPolicyManager::vectorsEqual(SortedVector<audio_io_handle_t>& outputs1, |
| SortedVector<audio_io_handle_t>& outputs2) |
| { |
| if (outputs1.size() != outputs2.size()) { |
| return false; |
| } |
| for (size_t i = 0; i < outputs1.size(); i++) { |
| if (outputs1[i] != outputs2[i]) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| void AudioPolicyManager::checkOutputForStrategy(routing_strategy strategy) |
| { |
| audio_devices_t oldDevice = getDeviceForStrategy(strategy, true /*fromCache*/); |
| audio_devices_t newDevice = getDeviceForStrategy(strategy, false /*fromCache*/); |
| SortedVector<audio_io_handle_t> srcOutputs = getOutputsForDevice(oldDevice, mPreviousOutputs); |
| SortedVector<audio_io_handle_t> dstOutputs = getOutputsForDevice(newDevice, mOutputs); |
| |
| // also take into account external policy-related changes: add all outputs which are |
| // associated with policies in the "before" and "after" output vectors |
| ALOGVV("checkOutputForStrategy(): policy related outputs"); |
| for (size_t i = 0 ; i < mPreviousOutputs.size() ; i++) { |
| const sp<SwAudioOutputDescriptor> desc = mPreviousOutputs.valueAt(i); |
| if (desc != 0 && desc->mPolicyMix != NULL) { |
| srcOutputs.add(desc->mIoHandle); |
| ALOGVV(" previous outputs: adding %d", desc->mIoHandle); |
| } |
| } |
| for (size_t i = 0 ; i < mOutputs.size() ; i++) { |
| const sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| if (desc != 0 && desc->mPolicyMix != NULL) { |
| dstOutputs.add(desc->mIoHandle); |
| ALOGVV(" new outputs: adding %d", desc->mIoHandle); |
| } |
| } |
| |
| if (!vectorsEqual(srcOutputs,dstOutputs)) { |
| ALOGV("checkOutputForStrategy() strategy %d, moving from output %d to output %d", |
| strategy, srcOutputs[0], dstOutputs[0]); |
| // mute strategy while moving tracks from one output to another |
| for (size_t i = 0; i < srcOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueFor(srcOutputs[i]); |
| if (isStrategyActive(desc, strategy)) { |
| setStrategyMute(strategy, true, desc); |
| setStrategyMute(strategy, false, desc, MUTE_TIME_MS, newDevice); |
| } |
| sp<AudioSourceDescriptor> source = |
| getSourceForStrategyOnOutput(srcOutputs[i], strategy); |
| if (source != 0){ |
| connectAudioSource(source); |
| } |
| } |
| |
| // Move effects associated to this strategy from previous output to new output |
| if (strategy == STRATEGY_MEDIA) { |
| selectOutputForMusicEffects(); |
| } |
| // Move tracks associated to this strategy from previous output to new output |
| for (int i = 0; i < AUDIO_STREAM_FOR_POLICY_CNT; i++) { |
| if (getStrategy((audio_stream_type_t)i) == strategy) { |
| mpClientInterface->invalidateStream((audio_stream_type_t)i); |
| } |
| } |
| } |
| } |
| |
| void AudioPolicyManager::checkOutputForAllStrategies() |
| { |
| if (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM) == AUDIO_POLICY_FORCE_SYSTEM_ENFORCED) |
| checkOutputForStrategy(STRATEGY_ENFORCED_AUDIBLE); |
| checkOutputForStrategy(STRATEGY_PHONE); |
| if (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM) != AUDIO_POLICY_FORCE_SYSTEM_ENFORCED) |
| checkOutputForStrategy(STRATEGY_ENFORCED_AUDIBLE); |
| checkOutputForStrategy(STRATEGY_SONIFICATION); |
| checkOutputForStrategy(STRATEGY_SONIFICATION_RESPECTFUL); |
| checkOutputForStrategy(STRATEGY_ACCESSIBILITY); |
| checkOutputForStrategy(STRATEGY_MEDIA); |
| checkOutputForStrategy(STRATEGY_DTMF); |
| checkOutputForStrategy(STRATEGY_REROUTING); |
| } |
| |
| void AudioPolicyManager::checkA2dpSuspend() |
| { |
| audio_io_handle_t a2dpOutput = mOutputs.getA2dpOutput(); |
| if (a2dpOutput == 0) { |
| mA2dpSuspended = false; |
| return; |
| } |
| |
| bool isScoConnected = |
| ((mAvailableInputDevices.types() & AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET & |
| ~AUDIO_DEVICE_BIT_IN) != 0) || |
| ((mAvailableOutputDevices.types() & AUDIO_DEVICE_OUT_ALL_SCO) != 0); |
| |
| // if suspended, restore A2DP output if: |
| // ((SCO device is NOT connected) || |
| // ((forced usage communication is NOT SCO) && (forced usage for record is NOT SCO) && |
| // (phone state is NOT in call) && (phone state is NOT ringing))) |
| // |
| // if not suspended, suspend A2DP output if: |
| // (SCO device is connected) && |
| // ((forced usage for communication is SCO) || (forced usage for record is SCO) || |
| // ((phone state is in call) || (phone state is ringing))) |
| // |
| if (mA2dpSuspended) { |
| if (!isScoConnected || |
| ((mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_COMMUNICATION) != |
| AUDIO_POLICY_FORCE_BT_SCO) && |
| (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_RECORD) != |
| AUDIO_POLICY_FORCE_BT_SCO) && |
| (mEngine->getPhoneState() != AUDIO_MODE_IN_CALL) && |
| (mEngine->getPhoneState() != AUDIO_MODE_RINGTONE))) { |
| |
| mpClientInterface->restoreOutput(a2dpOutput); |
| mA2dpSuspended = false; |
| } |
| } else { |
| if (isScoConnected && |
| ((mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_COMMUNICATION) == |
| AUDIO_POLICY_FORCE_BT_SCO) || |
| (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_RECORD) == |
| AUDIO_POLICY_FORCE_BT_SCO) || |
| (mEngine->getPhoneState() == AUDIO_MODE_IN_CALL) || |
| (mEngine->getPhoneState() == AUDIO_MODE_RINGTONE))) { |
| |
| mpClientInterface->suspendOutput(a2dpOutput); |
| mA2dpSuspended = true; |
| } |
| } |
| } |
| |
| audio_devices_t AudioPolicyManager::getNewOutputDevice(const sp<AudioOutputDescriptor>& outputDesc, |
| bool fromCache) |
| { |
| audio_devices_t device = AUDIO_DEVICE_NONE; |
| |
| ssize_t index = mAudioPatches.indexOfKey(outputDesc->getPatchHandle()); |
| if (index >= 0) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| if (patchDesc->mUid != mUidCached) { |
| ALOGV("getNewOutputDevice() device %08x forced by patch %d", |
| outputDesc->device(), outputDesc->getPatchHandle()); |
| return outputDesc->device(); |
| } |
| } |
| |
| // check the following by order of priority to request a routing change if necessary: |
| // 1: the strategy enforced audible is active and enforced on the output: |
| // use device for strategy enforced audible |
| // 2: we are in call or the strategy phone is active on the output: |
| // use device for strategy phone |
| // 3: the strategy sonification is active on the output: |
| // use device for strategy sonification |
| // 4: the strategy for enforced audible is active but not enforced on the output: |
| // use the device for strategy enforced audible |
| // 5: the strategy accessibility is active on the output: |
| // use device for strategy accessibility |
| // 6: the strategy "respectful" sonification is active on the output: |
| // use device for strategy "respectful" sonification |
| // 7: the strategy media is active on the output: |
| // use device for strategy media |
| // 8: the strategy DTMF is active on the output: |
| // use device for strategy DTMF |
| // 9: the strategy for beacon, a.k.a. "transmitted through speaker" is active on the output: |
| // use device for strategy t-t-s |
| if (isStrategyActive(outputDesc, STRATEGY_ENFORCED_AUDIBLE) && |
| mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM) == AUDIO_POLICY_FORCE_SYSTEM_ENFORCED) { |
| device = getDeviceForStrategy(STRATEGY_ENFORCED_AUDIBLE, fromCache); |
| } else if (isInCall() || |
| isStrategyActive(outputDesc, STRATEGY_PHONE)) { |
| device = getDeviceForStrategy(STRATEGY_PHONE, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_SONIFICATION)) { |
| device = getDeviceForStrategy(STRATEGY_SONIFICATION, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_ENFORCED_AUDIBLE)) { |
| device = getDeviceForStrategy(STRATEGY_ENFORCED_AUDIBLE, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_ACCESSIBILITY)) { |
| device = getDeviceForStrategy(STRATEGY_ACCESSIBILITY, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_SONIFICATION_RESPECTFUL)) { |
| device = getDeviceForStrategy(STRATEGY_SONIFICATION_RESPECTFUL, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_MEDIA)) { |
| device = getDeviceForStrategy(STRATEGY_MEDIA, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_DTMF)) { |
| device = getDeviceForStrategy(STRATEGY_DTMF, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_TRANSMITTED_THROUGH_SPEAKER)) { |
| device = getDeviceForStrategy(STRATEGY_TRANSMITTED_THROUGH_SPEAKER, fromCache); |
| } else if (isStrategyActive(outputDesc, STRATEGY_REROUTING)) { |
| device = getDeviceForStrategy(STRATEGY_REROUTING, fromCache); |
| } |
| |
| ALOGV("getNewOutputDevice() selected device %x", device); |
| return device; |
| } |
| |
| audio_devices_t AudioPolicyManager::getNewInputDevice(const sp<AudioInputDescriptor>& inputDesc) |
| { |
| audio_devices_t device = AUDIO_DEVICE_NONE; |
| |
| ssize_t index = mAudioPatches.indexOfKey(inputDesc->getPatchHandle()); |
| if (index >= 0) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| if (patchDesc->mUid != mUidCached) { |
| ALOGV("getNewInputDevice() device %08x forced by patch %d", |
| inputDesc->mDevice, inputDesc->getPatchHandle()); |
| return inputDesc->mDevice; |
| } |
| } |
| |
| audio_source_t source = inputDesc->getHighestPrioritySource(true /*activeOnly*/); |
| if (isInCall()) { |
| device = getDeviceAndMixForInputSource(AUDIO_SOURCE_VOICE_COMMUNICATION); |
| } else if (source != AUDIO_SOURCE_DEFAULT) { |
| device = getDeviceAndMixForInputSource(source); |
| } |
| |
| return device; |
| } |
| |
| bool AudioPolicyManager::streamsMatchForvolume(audio_stream_type_t stream1, |
| audio_stream_type_t stream2) { |
| return (stream1 == stream2); |
| } |
| |
| uint32_t AudioPolicyManager::getStrategyForStream(audio_stream_type_t stream) { |
| return (uint32_t)getStrategy(stream); |
| } |
| |
| audio_devices_t AudioPolicyManager::getDevicesForStream(audio_stream_type_t stream) { |
| // By checking the range of stream before calling getStrategy, we avoid |
| // getStrategy's behavior for invalid streams. getStrategy would do a ALOGE |
| // and then return STRATEGY_MEDIA, but we want to return the empty set. |
| if (stream < (audio_stream_type_t) 0 || stream >= AUDIO_STREAM_PUBLIC_CNT) { |
| return AUDIO_DEVICE_NONE; |
| } |
| audio_devices_t devices = AUDIO_DEVICE_NONE; |
| for (int curStream = 0; curStream < AUDIO_STREAM_FOR_POLICY_CNT; curStream++) { |
| if (!streamsMatchForvolume(stream, (audio_stream_type_t)curStream)) { |
| continue; |
| } |
| routing_strategy curStrategy = getStrategy((audio_stream_type_t)curStream); |
| audio_devices_t curDevices = |
| getDeviceForStrategy((routing_strategy)curStrategy, false /*fromCache*/); |
| SortedVector<audio_io_handle_t> outputs = getOutputsForDevice(curDevices, mOutputs); |
| for (size_t i = 0; i < outputs.size(); i++) { |
| sp<AudioOutputDescriptor> outputDesc = mOutputs.valueFor(outputs[i]); |
| if (outputDesc->isStreamActive((audio_stream_type_t)curStream)) { |
| curDevices |= outputDesc->device(); |
| } |
| } |
| devices |= curDevices; |
| } |
| |
| /*Filter SPEAKER_SAFE out of results, as AudioService doesn't know about it |
| and doesn't really need to.*/ |
| if (devices & AUDIO_DEVICE_OUT_SPEAKER_SAFE) { |
| devices |= AUDIO_DEVICE_OUT_SPEAKER; |
| devices &= ~AUDIO_DEVICE_OUT_SPEAKER_SAFE; |
| } |
| return devices; |
| } |
| |
| routing_strategy AudioPolicyManager::getStrategy(audio_stream_type_t stream) const |
| { |
| ALOG_ASSERT(stream != AUDIO_STREAM_PATCH,"getStrategy() called for AUDIO_STREAM_PATCH"); |
| return mEngine->getStrategyForStream(stream); |
| } |
| |
| uint32_t AudioPolicyManager::getStrategyForAttr(const audio_attributes_t *attr) { |
| // flags to strategy mapping |
| if ((attr->flags & AUDIO_FLAG_BEACON) == AUDIO_FLAG_BEACON) { |
| return (uint32_t) STRATEGY_TRANSMITTED_THROUGH_SPEAKER; |
| } |
| if ((attr->flags & AUDIO_FLAG_AUDIBILITY_ENFORCED) == AUDIO_FLAG_AUDIBILITY_ENFORCED) { |
| return (uint32_t) STRATEGY_ENFORCED_AUDIBLE; |
| } |
| // usage to strategy mapping |
| return static_cast<uint32_t>(mEngine->getStrategyForUsage(attr->usage)); |
| } |
| |
| void AudioPolicyManager::handleNotificationRoutingForStream(audio_stream_type_t stream) { |
| switch(stream) { |
| case AUDIO_STREAM_MUSIC: |
| checkOutputForStrategy(STRATEGY_SONIFICATION_RESPECTFUL); |
| updateDevicesAndOutputs(); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| uint32_t AudioPolicyManager::handleEventForBeacon(int event) { |
| |
| // skip beacon mute management if a dedicated TTS output is available |
| if (mTtsOutputAvailable) { |
| return 0; |
| } |
| |
| switch(event) { |
| case STARTING_OUTPUT: |
| mBeaconMuteRefCount++; |
| break; |
| case STOPPING_OUTPUT: |
| if (mBeaconMuteRefCount > 0) { |
| mBeaconMuteRefCount--; |
| } |
| break; |
| case STARTING_BEACON: |
| mBeaconPlayingRefCount++; |
| break; |
| case STOPPING_BEACON: |
| if (mBeaconPlayingRefCount > 0) { |
| mBeaconPlayingRefCount--; |
| } |
| break; |
| } |
| |
| if (mBeaconMuteRefCount > 0) { |
| // any playback causes beacon to be muted |
| return setBeaconMute(true); |
| } else { |
| // no other playback: unmute when beacon starts playing, mute when it stops |
| return setBeaconMute(mBeaconPlayingRefCount == 0); |
| } |
| } |
| |
| uint32_t AudioPolicyManager::setBeaconMute(bool mute) { |
| ALOGV("setBeaconMute(%d) mBeaconMuteRefCount=%d mBeaconPlayingRefCount=%d", |
| mute, mBeaconMuteRefCount, mBeaconPlayingRefCount); |
| // keep track of muted state to avoid repeating mute/unmute operations |
| if (mBeaconMuted != mute) { |
| // mute/unmute AUDIO_STREAM_TTS on all outputs |
| ALOGV("\t muting %d", mute); |
| uint32_t maxLatency = 0; |
| for (size_t i = 0; i < mOutputs.size(); i++) { |
| sp<SwAudioOutputDescriptor> desc = mOutputs.valueAt(i); |
| setStreamMute(AUDIO_STREAM_TTS, mute/*on*/, |
| desc, |
| 0 /*delay*/, AUDIO_DEVICE_NONE); |
| const uint32_t latency = desc->latency() * 2; |
| if (latency > maxLatency) { |
| maxLatency = latency; |
| } |
| } |
| mBeaconMuted = mute; |
| return maxLatency; |
| } |
| return 0; |
| } |
| |
| audio_devices_t AudioPolicyManager::getDeviceForStrategy(routing_strategy strategy, |
| bool fromCache) |
| { |
| // Routing |
| // see if we have an explicit route |
| // scan the whole RouteMap, for each entry, convert the stream type to a strategy |
| // (getStrategy(stream)). |
| // if the strategy from the stream type in the RouteMap is the same as the argument above, |
| // and activity count is non-zero and the device in the route descriptor is available |
| // then select this device. |
| for (size_t routeIndex = 0; routeIndex < mOutputRoutes.size(); routeIndex++) { |
| sp<SessionRoute> route = mOutputRoutes.valueAt(routeIndex); |
| routing_strategy routeStrategy = getStrategy(route->mStreamType); |
| if ((routeStrategy == strategy) && route->isActive() && |
| (mAvailableOutputDevices.indexOf(route->mDeviceDescriptor) >= 0)) { |
| return route->mDeviceDescriptor->type(); |
| } |
| } |
| |
| if (fromCache) { |
| ALOGVV("getDeviceForStrategy() from cache strategy %d, device %x", |
| strategy, mDeviceForStrategy[strategy]); |
| return mDeviceForStrategy[strategy]; |
| } |
| return mEngine->getDeviceForStrategy(strategy); |
| } |
| |
| void AudioPolicyManager::updateDevicesAndOutputs() |
| { |
| for (int i = 0; i < NUM_STRATEGIES; i++) { |
| mDeviceForStrategy[i] = getDeviceForStrategy((routing_strategy)i, false /*fromCache*/); |
| } |
| mPreviousOutputs = mOutputs; |
| } |
| |
| uint32_t AudioPolicyManager::checkDeviceMuteStrategies(const sp<AudioOutputDescriptor>& outputDesc, |
| audio_devices_t prevDevice, |
| uint32_t delayMs) |
| { |
| // mute/unmute strategies using an incompatible device combination |
| // if muting, wait for the audio in pcm buffer to be drained before proceeding |
| // if unmuting, unmute only after the specified delay |
| if (outputDesc->isDuplicated()) { |
| return 0; |
| } |
| |
| uint32_t muteWaitMs = 0; |
| audio_devices_t device = outputDesc->device(); |
| bool shouldMute = outputDesc->isActive() && (popcount(device) >= 2); |
| |
| for (size_t i = 0; i < NUM_STRATEGIES; i++) { |
| audio_devices_t curDevice = getDeviceForStrategy((routing_strategy)i, false /*fromCache*/); |
| curDevice = curDevice & outputDesc->supportedDevices(); |
| bool mute = shouldMute && (curDevice & device) && (curDevice != device); |
| bool doMute = false; |
| |
| if (mute && !outputDesc->mStrategyMutedByDevice[i]) { |
| doMute = true; |
| outputDesc->mStrategyMutedByDevice[i] = true; |
| } else if (!mute && outputDesc->mStrategyMutedByDevice[i]){ |
| doMute = true; |
| outputDesc->mStrategyMutedByDevice[i] = false; |
| } |
| if (doMute) { |
| for (size_t j = 0; j < mOutputs.size(); j++) { |
| sp<AudioOutputDescriptor> desc = mOutputs.valueAt(j); |
| // skip output if it does not share any device with current output |
| if ((desc->supportedDevices() & outputDesc->supportedDevices()) |
| == AUDIO_DEVICE_NONE) { |
| continue; |
| } |
| ALOGVV("checkDeviceMuteStrategies() %s strategy %zu (curDevice %04x)", |
| mute ? "muting" : "unmuting", i, curDevice); |
| setStrategyMute((routing_strategy)i, mute, desc, mute ? 0 : delayMs); |
| if (isStrategyActive(desc, (routing_strategy)i)) { |
| if (mute) { |
| // FIXME: should not need to double latency if volume could be applied |
| // immediately by the audioflinger mixer. We must account for the delay |
| // between now and the next time the audioflinger thread for this output |
| // will process a buffer (which corresponds to one buffer size, |
| // usually 1/2 or 1/4 of the latency). |
| if (muteWaitMs < desc->latency() * 2) { |
| muteWaitMs = desc->latency() * 2; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| // temporary mute output if device selection changes to avoid volume bursts due to |
| // different per device volumes |
| if (outputDesc->isActive() && (device != prevDevice)) { |
| uint32_t tempMuteWaitMs = outputDesc->latency() * 2; |
| // temporary mute duration is conservatively set to 4 times the reported latency |
| uint32_t tempMuteDurationMs = outputDesc->latency() * 4; |
| if (muteWaitMs < tempMuteWaitMs) { |
| muteWaitMs = tempMuteWaitMs; |
| } |
| |
| for (size_t i = 0; i < NUM_STRATEGIES; i++) { |
| if (isStrategyActive(outputDesc, (routing_strategy)i)) { |
| // make sure that we do not start the temporary mute period too early in case of |
| // delayed device change |
| setStrategyMute((routing_strategy)i, true, outputDesc, delayMs); |
| setStrategyMute((routing_strategy)i, false, outputDesc, |
| delayMs + tempMuteDurationMs, device); |
| } |
| } |
| } |
| |
| // wait for the PCM output buffers to empty before proceeding with the rest of the command |
| if (muteWaitMs > delayMs) { |
| muteWaitMs -= delayMs; |
| usleep(muteWaitMs * 1000); |
| return muteWaitMs; |
| } |
| return 0; |
| } |
| |
| uint32_t AudioPolicyManager::setOutputDevice(const sp<AudioOutputDescriptor>& outputDesc, |
| audio_devices_t device, |
| bool force, |
| int delayMs, |
| audio_patch_handle_t *patchHandle, |
| const char* address) |
| { |
| ALOGV("setOutputDevice() device %04x delayMs %d", device, delayMs); |
| AudioParameter param; |
| uint32_t muteWaitMs; |
| |
| if (outputDesc->isDuplicated()) { |
| muteWaitMs = setOutputDevice(outputDesc->subOutput1(), device, force, delayMs); |
| muteWaitMs += setOutputDevice(outputDesc->subOutput2(), device, force, delayMs); |
| return muteWaitMs; |
| } |
| // no need to proceed if new device is not AUDIO_DEVICE_NONE and not supported by current |
| // output profile |
| if ((device != AUDIO_DEVICE_NONE) && |
| ((device & outputDesc->supportedDevices()) == 0)) { |
| return 0; |
| } |
| |
| // filter devices according to output selected |
| device = (audio_devices_t)(device & outputDesc->supportedDevices()); |
| |
| audio_devices_t prevDevice = outputDesc->mDevice; |
| |
| ALOGV("setOutputDevice() prevDevice 0x%04x", prevDevice); |
| |
| if (device != AUDIO_DEVICE_NONE) { |
| outputDesc->mDevice = device; |
| } |
| muteWaitMs = checkDeviceMuteStrategies(outputDesc, prevDevice, delayMs); |
| |
| // Do not change the routing if: |
| // the requested device is AUDIO_DEVICE_NONE |
| // OR the requested device is the same as current device |
| // AND force is not specified |
| // AND the output is connected by a valid audio patch. |
| // Doing this check here allows the caller to call setOutputDevice() without conditions |
| if ((device == AUDIO_DEVICE_NONE || device == prevDevice) && |
| !force && |
| outputDesc->getPatchHandle() != 0) { |
| ALOGV("setOutputDevice() setting same device 0x%04x or null device", device); |
| return muteWaitMs; |
| } |
| |
| ALOGV("setOutputDevice() changing device"); |
| |
| // do the routing |
| if (device == AUDIO_DEVICE_NONE) { |
| resetOutputDevice(outputDesc, delayMs, NULL); |
| } else { |
| DeviceVector deviceList; |
| if ((address == NULL) || (strlen(address) == 0)) { |
| deviceList = mAvailableOutputDevices.getDevicesFromType(device); |
| } else { |
| deviceList = mAvailableOutputDevices.getDevicesFromTypeAddr(device, String8(address)); |
| } |
| |
| if (!deviceList.isEmpty()) { |
| struct audio_patch patch; |
| outputDesc->toAudioPortConfig(&patch.sources[0]); |
| patch.num_sources = 1; |
| patch.num_sinks = 0; |
| for (size_t i = 0; i < deviceList.size() && i < AUDIO_PATCH_PORTS_MAX; i++) { |
| deviceList.itemAt(i)->toAudioPortConfig(&patch.sinks[i]); |
| patch.num_sinks++; |
| } |
| ssize_t index; |
| if (patchHandle && *patchHandle != AUDIO_PATCH_HANDLE_NONE) { |
| index = mAudioPatches.indexOfKey(*patchHandle); |
| } else { |
| index = mAudioPatches.indexOfKey(outputDesc->getPatchHandle()); |
| } |
| sp< AudioPatch> patchDesc; |
| audio_patch_handle_t afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| if (index >= 0) { |
| patchDesc = mAudioPatches.valueAt(index); |
| afPatchHandle = patchDesc->mAfPatchHandle; |
| } |
| |
| status_t status = mpClientInterface->createAudioPatch(&patch, |
| &afPatchHandle, |
| delayMs); |
| ALOGV("setOutputDevice() createAudioPatch returned %d patchHandle %d" |
| "num_sources %d num_sinks %d", |
| status, afPatchHandle, patch.num_sources, patch.num_sinks); |
| if (status == NO_ERROR) { |
| if (index < 0) { |
| patchDesc = new AudioPatch(&patch, mUidCached); |
| addAudioPatch(patchDesc->mHandle, patchDesc); |
| } else { |
| patchDesc->mPatch = patch; |
| } |
| patchDesc->mAfPatchHandle = afPatchHandle; |
| if (patchHandle) { |
| *patchHandle = patchDesc->mHandle; |
| } |
| outputDesc->setPatchHandle(patchDesc->mHandle); |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } |
| } |
| |
| // inform all input as well |
| for (size_t i = 0; i < mInputs.size(); i++) { |
| const sp<AudioInputDescriptor> inputDescriptor = mInputs.valueAt(i); |
| if (!is_virtual_input_device(inputDescriptor->mDevice)) { |
| AudioParameter inputCmd = AudioParameter(); |
| ALOGV("%s: inform input %d of device:%d", __func__, |
| inputDescriptor->mIoHandle, device); |
| inputCmd.addInt(String8(AudioParameter::keyRouting),device); |
| mpClientInterface->setParameters(inputDescriptor->mIoHandle, |
| inputCmd.toString(), |
| delayMs); |
| } |
| } |
| } |
| |
| // update stream volumes according to new device |
| applyStreamVolumes(outputDesc, device, delayMs); |
| |
| return muteWaitMs; |
| } |
| |
| status_t AudioPolicyManager::resetOutputDevice(const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs, |
| audio_patch_handle_t *patchHandle) |
| { |
| ssize_t index; |
| if (patchHandle) { |
| index = mAudioPatches.indexOfKey(*patchHandle); |
| } else { |
| index = mAudioPatches.indexOfKey(outputDesc->getPatchHandle()); |
| } |
| if (index < 0) { |
| return INVALID_OPERATION; |
| } |
| sp< AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| status_t status = mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, delayMs); |
| ALOGV("resetOutputDevice() releaseAudioPatch returned %d", status); |
| outputDesc->setPatchHandle(AUDIO_PATCH_HANDLE_NONE); |
| removeAudioPatch(patchDesc->mHandle); |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| return status; |
| } |
| |
| status_t AudioPolicyManager::setInputDevice(audio_io_handle_t input, |
| audio_devices_t device, |
| bool force, |
| audio_patch_handle_t *patchHandle) |
| { |
| status_t status = NO_ERROR; |
| |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueFor(input); |
| if ((device != AUDIO_DEVICE_NONE) && ((device != inputDesc->mDevice) || force)) { |
| inputDesc->mDevice = device; |
| |
| DeviceVector deviceList = mAvailableInputDevices.getDevicesFromType(device); |
| if (!deviceList.isEmpty()) { |
| struct audio_patch patch; |
| inputDesc->toAudioPortConfig(&patch.sinks[0]); |
| // AUDIO_SOURCE_HOTWORD is for internal use only: |
| // handled as AUDIO_SOURCE_VOICE_RECOGNITION by the audio HAL |
| if (patch.sinks[0].ext.mix.usecase.source == AUDIO_SOURCE_HOTWORD && |
| !inputDesc->isSoundTrigger()) { |
| patch.sinks[0].ext.mix.usecase.source = AUDIO_SOURCE_VOICE_RECOGNITION; |
| } |
| patch.num_sinks = 1; |
| //only one input device for now |
| deviceList.itemAt(0)->toAudioPortConfig(&patch.sources[0]); |
| patch.num_sources = 1; |
| ssize_t index; |
| if (patchHandle && *patchHandle != AUDIO_PATCH_HANDLE_NONE) { |
| index = mAudioPatches.indexOfKey(*patchHandle); |
| } else { |
| index = mAudioPatches.indexOfKey(inputDesc->getPatchHandle()); |
| } |
| sp< AudioPatch> patchDesc; |
| audio_patch_handle_t afPatchHandle = AUDIO_PATCH_HANDLE_NONE; |
| if (index >= 0) { |
| patchDesc = mAudioPatches.valueAt(index); |
| afPatchHandle = patchDesc->mAfPatchHandle; |
| } |
| |
| status_t status = mpClientInterface->createAudioPatch(&patch, |
| &afPatchHandle, |
| 0); |
| ALOGV("setInputDevice() createAudioPatch returned %d patchHandle %d", |
| status, afPatchHandle); |
| if (status == NO_ERROR) { |
| if (index < 0) { |
| patchDesc = new AudioPatch(&patch, mUidCached); |
| addAudioPatch(patchDesc->mHandle, patchDesc); |
| } else { |
| patchDesc->mPatch = patch; |
| } |
| patchDesc->mAfPatchHandle = afPatchHandle; |
| if (patchHandle) { |
| *patchHandle = patchDesc->mHandle; |
| } |
| inputDesc->setPatchHandle(patchDesc->mHandle); |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| } |
| } |
| } |
| return status; |
| } |
| |
| status_t AudioPolicyManager::resetInputDevice(audio_io_handle_t input, |
| audio_patch_handle_t *patchHandle) |
| { |
| sp<AudioInputDescriptor> inputDesc = mInputs.valueFor(input); |
| ssize_t index; |
| if (patchHandle) { |
| index = mAudioPatches.indexOfKey(*patchHandle); |
| } else { |
| index = mAudioPatches.indexOfKey(inputDesc->getPatchHandle()); |
| } |
| if (index < 0) { |
| return INVALID_OPERATION; |
| } |
| sp< AudioPatch> patchDesc = mAudioPatches.valueAt(index); |
| status_t status = mpClientInterface->releaseAudioPatch(patchDesc->mAfPatchHandle, 0); |
| ALOGV("resetInputDevice() releaseAudioPatch returned %d", status); |
| inputDesc->setPatchHandle(AUDIO_PATCH_HANDLE_NONE); |
| removeAudioPatch(patchDesc->mHandle); |
| nextAudioPortGeneration(); |
| mpClientInterface->onAudioPatchListUpdate(); |
| return status; |
| } |
| |
| sp<IOProfile> AudioPolicyManager::getInputProfile(audio_devices_t device, |
| const String8& address, |
| uint32_t& samplingRate, |
| audio_format_t& format, |
| audio_channel_mask_t& channelMask, |
| audio_input_flags_t flags) |
| { |
| // Choose an input profile based on the requested capture parameters: select the first available |
| // profile supporting all requested parameters. |
| // |
| // TODO: perhaps isCompatibleProfile should return a "matching" score so we can return |
| // the best matching profile, not the first one. |
| |
| for (size_t i = 0; i < mHwModules.size(); i++) |
| { |
| if (mHwModules[i]->mHandle == 0) { |
| continue; |
| } |
| for (size_t j = 0; j < mHwModules[i]->mInputProfiles.size(); j++) |
| { |
| sp<IOProfile> profile = mHwModules[i]->mInputProfiles[j]; |
| // profile->log(); |
| if (profile->isCompatibleProfile(device, address, samplingRate, |
| &samplingRate /*updatedSamplingRate*/, |
| format, |
| &format /*updatedFormat*/, |
| channelMask, |
| &channelMask /*updatedChannelMask*/, |
| (audio_output_flags_t) flags)) { |
| |
| return profile; |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| |
| audio_devices_t AudioPolicyManager::getDeviceAndMixForInputSource(audio_source_t inputSource, |
| AudioMix **policyMix) |
| { |
| audio_devices_t availableDeviceTypes = mAvailableInputDevices.types() & ~AUDIO_DEVICE_BIT_IN; |
| audio_devices_t selectedDeviceFromMix = |
| mPolicyMixes.getDeviceAndMixForInputSource(inputSource, availableDeviceTypes, policyMix); |
| |
| if (selectedDeviceFromMix != AUDIO_DEVICE_NONE) { |
| return selectedDeviceFromMix; |
| } |
| return getDeviceForInputSource(inputSource); |
| } |
| |
| audio_devices_t AudioPolicyManager::getDeviceForInputSource(audio_source_t inputSource) |
| { |
| // Routing |
| // Scan the whole RouteMap to see if we have an explicit route: |
| // if the input source in the RouteMap is the same as the argument above, |
| // and activity count is non-zero and the device in the route descriptor is available |
| // then select this device. |
| for (size_t routeIndex = 0; routeIndex < mInputRoutes.size(); routeIndex++) { |
| sp<SessionRoute> route = mInputRoutes.valueAt(routeIndex); |
| if ((inputSource == route->mSource) && route->isActive() && |
| (mAvailableInputDevices.indexOf(route->mDeviceDescriptor) >= 0)) { |
| return route->mDeviceDescriptor->type(); |
| } |
| } |
| |
| return mEngine->getDeviceForInputSource(inputSource); |
| } |
| |
| float AudioPolicyManager::computeVolume(audio_stream_type_t stream, |
| int index, |
| audio_devices_t device) |
| { |
| float volumeDB = mVolumeCurves->volIndexToDb(stream, Volume::getDeviceCategory(device), index); |
| |
| // handle the case of accessibility active while a ringtone is playing: if the ringtone is much |
| // louder than the accessibility prompt, the prompt cannot be heard, thus masking the touch |
| // exploration of the dialer UI. In this situation, bring the accessibility volume closer to |
| // the ringtone volume |
| if ((stream == AUDIO_STREAM_ACCESSIBILITY) |
| && (AUDIO_MODE_RINGTONE == mEngine->getPhoneState()) |
| && isStreamActive(AUDIO_STREAM_RING, 0)) { |
| const float ringVolumeDB = computeVolume(AUDIO_STREAM_RING, index, device); |
| return ringVolumeDB - 4 > volumeDB ? ringVolumeDB - 4 : volumeDB; |
| } |
| |
| // in-call: always cap earpiece volume by voice volume + some low headroom |
| if ((stream != AUDIO_STREAM_VOICE_CALL) && (device & AUDIO_DEVICE_OUT_EARPIECE) && isInCall()) { |
| switch (stream) { |
| case AUDIO_STREAM_SYSTEM: |
| case AUDIO_STREAM_RING: |
| case AUDIO_STREAM_MUSIC: |
| case AUDIO_STREAM_ALARM: |
| case AUDIO_STREAM_NOTIFICATION: |
| case AUDIO_STREAM_ENFORCED_AUDIBLE: |
| case AUDIO_STREAM_DTMF: |
| case AUDIO_STREAM_ACCESSIBILITY: { |
| const float maxVoiceVolDb = computeVolume(AUDIO_STREAM_VOICE_CALL, index, device) |
| + IN_CALL_EARPIECE_HEADROOM_DB; |
| if (volumeDB > maxVoiceVolDb) { |
| ALOGV("computeVolume() stream %d at vol=%f overriden by stream %d at vol=%f", |
| stream, volumeDB, AUDIO_STREAM_VOICE_CALL, maxVoiceVolDb); |
| volumeDB = maxVoiceVolDb; |
| } |
| } break; |
| default: |
| break; |
| } |
| } |
| |
| // if a headset is connected, apply the following rules to ring tones and notifications |
| // to avoid sound level bursts in user's ears: |
| // - always attenuate notifications volume by 6dB |
| // - attenuate ring tones volume by 6dB unless music is not playing and |
| // speaker is part of the select devices |
| // - if music is playing, always limit the volume to current music volume, |
| // with a minimum threshold at -36dB so that notification is always perceived. |
| const routing_strategy stream_strategy = getStrategy(stream); |
| if ((device & (AUDIO_DEVICE_OUT_BLUETOOTH_A2DP | |
| AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES | |
| AUDIO_DEVICE_OUT_WIRED_HEADSET | |
| AUDIO_DEVICE_OUT_WIRED_HEADPHONE | |
| AUDIO_DEVICE_OUT_USB_HEADSET)) && |
| ((stream_strategy == STRATEGY_SONIFICATION) |
| || (stream_strategy == STRATEGY_SONIFICATION_RESPECTFUL) |
| || (stream == AUDIO_STREAM_SYSTEM) |
| || ((stream_strategy == STRATEGY_ENFORCED_AUDIBLE) && |
| (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM) == AUDIO_POLICY_FORCE_NONE))) && |
| mVolumeCurves->canBeMuted(stream)) { |
| // when the phone is ringing we must consider that music could have been paused just before |
| // by the music application and behave as if music was active if the last music track was |
| // just stopped |
| if (isStreamActive(AUDIO_STREAM_MUSIC, SONIFICATION_HEADSET_MUSIC_DELAY) || |
| mLimitRingtoneVolume) { |
| volumeDB += SONIFICATION_HEADSET_VOLUME_FACTOR_DB; |
| audio_devices_t musicDevice = getDeviceForStrategy(STRATEGY_MEDIA, true /*fromCache*/); |
| float musicVolDB = computeVolume(AUDIO_STREAM_MUSIC, |
| mVolumeCurves->getVolumeIndex(AUDIO_STREAM_MUSIC, |
| musicDevice), |
| musicDevice); |
| float minVolDB = (musicVolDB > SONIFICATION_HEADSET_VOLUME_MIN_DB) ? |
| musicVolDB : SONIFICATION_HEADSET_VOLUME_MIN_DB; |
| if (volumeDB > minVolDB) { |
| volumeDB = minVolDB; |
| ALOGV("computeVolume limiting volume to %f musicVol %f", minVolDB, musicVolDB); |
| } |
| if (device & (AUDIO_DEVICE_OUT_BLUETOOTH_A2DP | |
| AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES)) { |
| // on A2DP, also ensure notification volume is not too low compared to media when |
| // intended to be played |
| if ((volumeDB > -96.0f) && |
| (musicVolDB - SONIFICATION_A2DP_MAX_MEDIA_DIFF_DB > volumeDB)) { |
| ALOGV("computeVolume increasing volume for stream=%d device=0x%X from %f to %f", |
| stream, device, |
| volumeDB, musicVolDB - SONIFICATION_A2DP_MAX_MEDIA_DIFF_DB); |
| volumeDB = musicVolDB - SONIFICATION_A2DP_MAX_MEDIA_DIFF_DB; |
| } |
| } |
| } else if ((Volume::getDeviceForVolume(device) != AUDIO_DEVICE_OUT_SPEAKER) || |
| stream_strategy != STRATEGY_SONIFICATION) { |
| volumeDB += SONIFICATION_HEADSET_VOLUME_FACTOR_DB; |
| } |
| } |
| |
| return volumeDB; |
| } |
| |
| status_t AudioPolicyManager::checkAndSetVolume(audio_stream_type_t stream, |
| int index, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| audio_devices_t device, |
| int delayMs, |
| bool force) |
| { |
| // do not change actual stream volume if the stream is muted |
| if (outputDesc->mMuteCount[stream] != 0) { |
| ALOGVV("checkAndSetVolume() stream %d muted count %d", |
| stream, outputDesc->mMuteCount[stream]); |
| return NO_ERROR; |
| } |
| audio_policy_forced_cfg_t forceUseForComm = |
| mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_COMMUNICATION); |
| // do not change in call volume if bluetooth is connected and vice versa |
| if ((stream == AUDIO_STREAM_VOICE_CALL && forceUseForComm == AUDIO_POLICY_FORCE_BT_SCO) || |
| (stream == AUDIO_STREAM_BLUETOOTH_SCO && forceUseForComm != AUDIO_POLICY_FORCE_BT_SCO)) { |
| ALOGV("checkAndSetVolume() cannot set stream %d volume with force use = %d for comm", |
| stream, forceUseForComm); |
| return INVALID_OPERATION; |
| } |
| |
| if (device == AUDIO_DEVICE_NONE) { |
| device = outputDesc->device(); |
| } |
| |
| float volumeDb = computeVolume(stream, index, device); |
| if (outputDesc->isFixedVolume(device)) { |
| volumeDb = 0.0f; |
| } |
| |
| outputDesc->setVolume(volumeDb, stream, device, delayMs, force); |
| |
| if (stream == AUDIO_STREAM_VOICE_CALL || |
| stream == AUDIO_STREAM_BLUETOOTH_SCO) { |
| float voiceVolume; |
| // Force voice volume to max for bluetooth SCO as volume is managed by the headset |
| if (stream == AUDIO_STREAM_VOICE_CALL) { |
| voiceVolume = (float)index/(float)mVolumeCurves->getVolumeIndexMax(stream); |
| } else { |
| voiceVolume = 1.0; |
| } |
| |
| if (voiceVolume != mLastVoiceVolume) { |
| mpClientInterface->setVoiceVolume(voiceVolume, delayMs); |
| mLastVoiceVolume = voiceVolume; |
| } |
| } |
| |
| return NO_ERROR; |
| } |
| |
| void AudioPolicyManager::applyStreamVolumes(const sp<AudioOutputDescriptor>& outputDesc, |
| audio_devices_t device, |
| int delayMs, |
| bool force) |
| { |
| ALOGVV("applyStreamVolumes() for device %08x", device); |
| |
| for (int stream = 0; stream < AUDIO_STREAM_FOR_POLICY_CNT; stream++) { |
| checkAndSetVolume((audio_stream_type_t)stream, |
| mVolumeCurves->getVolumeIndex((audio_stream_type_t)stream, device), |
| outputDesc, |
| device, |
| delayMs, |
| force); |
| } |
| } |
| |
| void AudioPolicyManager::setStrategyMute(routing_strategy strategy, |
| bool on, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs, |
| audio_devices_t device) |
| { |
| ALOGVV("setStrategyMute() strategy %d, mute %d, output ID %d", |
| strategy, on, outputDesc->getId()); |
| for (int stream = 0; stream < AUDIO_STREAM_FOR_POLICY_CNT; stream++) { |
| if (getStrategy((audio_stream_type_t)stream) == strategy) { |
| setStreamMute((audio_stream_type_t)stream, on, outputDesc, delayMs, device); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::setStreamMute(audio_stream_type_t stream, |
| bool on, |
| const sp<AudioOutputDescriptor>& outputDesc, |
| int delayMs, |
| audio_devices_t device) |
| { |
| if (device == AUDIO_DEVICE_NONE) { |
| device = outputDesc->device(); |
| } |
| |
| ALOGVV("setStreamMute() stream %d, mute %d, mMuteCount %d device %04x", |
| stream, on, outputDesc->mMuteCount[stream], device); |
| |
| if (on) { |
| if (outputDesc->mMuteCount[stream] == 0) { |
| if (mVolumeCurves->canBeMuted(stream) && |
| ((stream != AUDIO_STREAM_ENFORCED_AUDIBLE) || |
| (mEngine->getForceUse(AUDIO_POLICY_FORCE_FOR_SYSTEM) == AUDIO_POLICY_FORCE_NONE))) { |
| checkAndSetVolume(stream, 0, outputDesc, device, delayMs); |
| } |
| } |
| // increment mMuteCount after calling checkAndSetVolume() so that volume change is not ignored |
| outputDesc->mMuteCount[stream]++; |
| } else { |
| if (outputDesc->mMuteCount[stream] == 0) { |
| ALOGV("setStreamMute() unmuting non muted stream!"); |
| return; |
| } |
| if (--outputDesc->mMuteCount[stream] == 0) { |
| checkAndSetVolume(stream, |
| mVolumeCurves->getVolumeIndex(stream, device), |
| outputDesc, |
| device, |
| delayMs); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::handleIncallSonification(audio_stream_type_t stream, |
| bool starting, bool stateChange) |
| { |
| if(!hasPrimaryOutput()) { |
| return; |
| } |
| |
| // if the stream pertains to sonification strategy and we are in call we must |
| // mute the stream if it is low visibility. If it is high visibility, we must play a tone |
| // in the device used for phone strategy and play the tone if the selected device does not |
| // interfere with the device used for phone strategy |
| // if stateChange is true, we are called from setPhoneState() and we must mute or unmute as |
| // many times as there are active tracks on the output |
| const routing_strategy stream_strategy = getStrategy(stream); |
| if ((stream_strategy == STRATEGY_SONIFICATION) || |
| ((stream_strategy == STRATEGY_SONIFICATION_RESPECTFUL))) { |
| sp<SwAudioOutputDescriptor> outputDesc = mPrimaryOutput; |
| ALOGV("handleIncallSonification() stream %d starting %d device %x stateChange %d", |
| stream, starting, outputDesc->mDevice, stateChange); |
| if (outputDesc->mRefCount[stream]) { |
| int muteCount = 1; |
| if (stateChange) { |
| muteCount = outputDesc->mRefCount[stream]; |
| } |
| if (audio_is_low_visibility(stream)) { |
| ALOGV("handleIncallSonification() low visibility, muteCount %d", muteCount); |
| for (int i = 0; i < muteCount; i++) { |
| setStreamMute(stream, starting, mPrimaryOutput); |
| } |
| } else { |
| ALOGV("handleIncallSonification() high visibility"); |
| if (outputDesc->device() & |
| getDeviceForStrategy(STRATEGY_PHONE, true /*fromCache*/)) { |
| ALOGV("handleIncallSonification() high visibility muted, muteCount %d", muteCount); |
| for (int i = 0; i < muteCount; i++) { |
| setStreamMute(stream, starting, mPrimaryOutput); |
| } |
| } |
| if (starting) { |
| mpClientInterface->startTone(AUDIO_POLICY_TONE_IN_CALL_NOTIFICATION, |
| AUDIO_STREAM_VOICE_CALL); |
| } else { |
| mpClientInterface->stopTone(); |
| } |
| } |
| } |
| } |
| } |
| |
| audio_stream_type_t AudioPolicyManager::streamTypefromAttributesInt(const audio_attributes_t *attr) |
| { |
| // flags to stream type mapping |
| if ((attr->flags & AUDIO_FLAG_AUDIBILITY_ENFORCED) == AUDIO_FLAG_AUDIBILITY_ENFORCED) { |
| return AUDIO_STREAM_ENFORCED_AUDIBLE; |
| } |
| if ((attr->flags & AUDIO_FLAG_SCO) == AUDIO_FLAG_SCO) { |
| return AUDIO_STREAM_BLUETOOTH_SCO; |
| } |
| if ((attr->flags & AUDIO_FLAG_BEACON) == AUDIO_FLAG_BEACON) { |
| return AUDIO_STREAM_TTS; |
| } |
| |
| // usage to stream type mapping |
| switch (attr->usage) { |
| case AUDIO_USAGE_MEDIA: |
| case AUDIO_USAGE_GAME: |
| case AUDIO_USAGE_ASSISTANT: |
| case AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE: |
| return AUDIO_STREAM_MUSIC; |
| case AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY: |
| return AUDIO_STREAM_ACCESSIBILITY; |
| case AUDIO_USAGE_ASSISTANCE_SONIFICATION: |
| return AUDIO_STREAM_SYSTEM; |
| case AUDIO_USAGE_VOICE_COMMUNICATION: |
| return AUDIO_STREAM_VOICE_CALL; |
| |
| case AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING: |
| return AUDIO_STREAM_DTMF; |
| |
| case AUDIO_USAGE_ALARM: |
| return AUDIO_STREAM_ALARM; |
| case AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE: |
| return AUDIO_STREAM_RING; |
| |
| case AUDIO_USAGE_NOTIFICATION: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_REQUEST: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_INSTANT: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_DELAYED: |
| case AUDIO_USAGE_NOTIFICATION_EVENT: |
| return AUDIO_STREAM_NOTIFICATION; |
| |
| case AUDIO_USAGE_UNKNOWN: |
| default: |
| return AUDIO_STREAM_MUSIC; |
| } |
| } |
| |
| bool AudioPolicyManager::isValidAttributes(const audio_attributes_t *paa) |
| { |
| // has flags that map to a strategy? |
| if ((paa->flags & (AUDIO_FLAG_AUDIBILITY_ENFORCED | AUDIO_FLAG_SCO | AUDIO_FLAG_BEACON)) != 0) { |
| return true; |
| } |
| |
| // has known usage? |
| switch (paa->usage) { |
| case AUDIO_USAGE_UNKNOWN: |
| case AUDIO_USAGE_MEDIA: |
| case AUDIO_USAGE_VOICE_COMMUNICATION: |
| case AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING: |
| case AUDIO_USAGE_ALARM: |
| case AUDIO_USAGE_NOTIFICATION: |
| case AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_REQUEST: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_INSTANT: |
| case AUDIO_USAGE_NOTIFICATION_COMMUNICATION_DELAYED: |
| case AUDIO_USAGE_NOTIFICATION_EVENT: |
| case AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY: |
| case AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE: |
| case AUDIO_USAGE_ASSISTANCE_SONIFICATION: |
| case AUDIO_USAGE_GAME: |
| case AUDIO_USAGE_VIRTUAL_SOURCE: |
| case AUDIO_USAGE_ASSISTANT: |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| bool AudioPolicyManager::isStrategyActive(const sp<AudioOutputDescriptor>& outputDesc, |
| routing_strategy strategy, uint32_t inPastMs, |
| nsecs_t sysTime) const |
| { |
| if ((sysTime == 0) && (inPastMs != 0)) { |
| sysTime = systemTime(); |
| } |
| for (int i = 0; i < (int)AUDIO_STREAM_FOR_POLICY_CNT; i++) { |
| if (((getStrategy((audio_stream_type_t)i) == strategy) || |
| (NUM_STRATEGIES == strategy)) && |
| outputDesc->isStreamActive((audio_stream_type_t)i, inPastMs, sysTime)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| audio_policy_forced_cfg_t AudioPolicyManager::getForceUse(audio_policy_force_use_t usage) |
| { |
| return mEngine->getForceUse(usage); |
| } |
| |
| bool AudioPolicyManager::isInCall() |
| { |
| return isStateInCall(mEngine->getPhoneState()); |
| } |
| |
| bool AudioPolicyManager::isStateInCall(int state) |
| { |
| return is_state_in_call(state); |
| } |
| |
| void AudioPolicyManager::cleanUpForDevice(const sp<DeviceDescriptor>& deviceDesc) |
| { |
| for (ssize_t i = (ssize_t)mAudioSources.size() - 1; i >= 0; i--) { |
| sp<AudioSourceDescriptor> sourceDesc = mAudioSources.valueAt(i); |
| if (sourceDesc->mDevice->equals(deviceDesc)) { |
| ALOGV("%s releasing audio source %d", __FUNCTION__, sourceDesc->getHandle()); |
| stopAudioSource(sourceDesc->getHandle()); |
| } |
| } |
| |
| for (ssize_t i = (ssize_t)mAudioPatches.size() - 1; i >= 0; i--) { |
| sp<AudioPatch> patchDesc = mAudioPatches.valueAt(i); |
| bool release = false; |
| for (size_t j = 0; j < patchDesc->mPatch.num_sources && !release; j++) { |
| const struct audio_port_config *source = &patchDesc->mPatch.sources[j]; |
| if (source->type == AUDIO_PORT_TYPE_DEVICE && |
| source->ext.device.type == deviceDesc->type()) { |
| release = true; |
| } |
| } |
| for (size_t j = 0; j < patchDesc->mPatch.num_sinks && !release; j++) { |
| const struct audio_port_config *sink = &patchDesc->mPatch.sinks[j]; |
| if (sink->type == AUDIO_PORT_TYPE_DEVICE && |
| sink->ext.device.type == deviceDesc->type()) { |
| release = true; |
| } |
| } |
| if (release) { |
| ALOGV("%s releasing patch %u", __FUNCTION__, patchDesc->mHandle); |
| releaseAudioPatch(patchDesc->mHandle, patchDesc->mUid); |
| } |
| } |
| } |
| |
| // Modify the list of surround sound formats supported. |
| void AudioPolicyManager::filterSurroundFormats(FormatVector *formatsPtr) { |
| FormatVector &formats = *formatsPtr; |
| // TODO Set this based on Config properties. |
| const bool alwaysForceAC3 = true; |
| |
| audio_policy_forced_cfg_t forceUse = mEngine->getForceUse( |
| AUDIO_POLICY_FORCE_FOR_ENCODED_SURROUND); |
| ALOGD("%s: forced use = %d", __FUNCTION__, forceUse); |
| |
| // Analyze original support for various formats. |
| bool supportsAC3 = false; |
| bool supportsOtherSurround = false; |
| bool supportsIEC61937 = false; |
| for (size_t formatIndex = 0; formatIndex < formats.size(); formatIndex++) { |
| audio_format_t format = formats[formatIndex]; |
| switch (format) { |
| case AUDIO_FORMAT_AC3: |
| supportsAC3 = true; |
| break; |
| case AUDIO_FORMAT_E_AC3: |
| case AUDIO_FORMAT_DTS: |
| case AUDIO_FORMAT_DTS_HD: |
| supportsOtherSurround = true; |
| break; |
| case AUDIO_FORMAT_IEC61937: |
| supportsIEC61937 = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| // Modify formats based on surround preferences. |
| // If NEVER, remove support for surround formats. |
| if (forceUse == AUDIO_POLICY_FORCE_ENCODED_SURROUND_NEVER) { |
| if (supportsAC3 || supportsOtherSurround || supportsIEC61937) { |
| // Remove surround sound related formats. |
| for (size_t formatIndex = 0; formatIndex < formats.size(); ) { |
| audio_format_t format = formats[formatIndex]; |
| switch(format) { |
| case AUDIO_FORMAT_AC3: |
| case AUDIO_FORMAT_E_AC3: |
| case AUDIO_FORMAT_DTS: |
| case AUDIO_FORMAT_DTS_HD: |
| case AUDIO_FORMAT_IEC61937: |
| formats.removeAt(formatIndex); |
| break; |
| default: |
| formatIndex++; // keep it |
| break; |
| } |
| } |
| supportsAC3 = false; |
| supportsOtherSurround = false; |
| supportsIEC61937 = false; |
| } |
| } else { // AUTO or ALWAYS |
| // Most TVs support AC3 even if they do not report it in the EDID. |
| if ((alwaysForceAC3 || (forceUse == AUDIO_POLICY_FORCE_ENCODED_SURROUND_ALWAYS)) |
| && !supportsAC3) { |
| formats.add(AUDIO_FORMAT_AC3); |
| supportsAC3 = true; |
| } |
| |
| // If ALWAYS, add support for raw surround formats if all are missing. |
| // This assumes that if any of these formats are reported by the HAL |
| // then the report is valid and should not be modified. |
| if ((forceUse == AUDIO_POLICY_FORCE_ENCODED_SURROUND_ALWAYS) |
| && !supportsOtherSurround) { |
| formats.add(AUDIO_FORMAT_E_AC3); |
| formats.add(AUDIO_FORMAT_DTS); |
| formats.add(AUDIO_FORMAT_DTS_HD); |
| supportsOtherSurround = true; |
| } |
| |
| // Add support for IEC61937 if any raw surround supported. |
| // The HAL could do this but add it here, just in case. |
| if ((supportsAC3 || supportsOtherSurround) && !supportsIEC61937) { |
| formats.add(AUDIO_FORMAT_IEC61937); |
| supportsIEC61937 = true; |
| } |
| } |
| } |
| |
| // Modify the list of channel masks supported. |
| void AudioPolicyManager::filterSurroundChannelMasks(ChannelsVector *channelMasksPtr) { |
| ChannelsVector &channelMasks = *channelMasksPtr; |
| audio_policy_forced_cfg_t forceUse = mEngine->getForceUse( |
| AUDIO_POLICY_FORCE_FOR_ENCODED_SURROUND); |
| |
| // If NEVER, then remove support for channelMasks > stereo. |
| if (forceUse == AUDIO_POLICY_FORCE_ENCODED_SURROUND_NEVER) { |
| for (size_t maskIndex = 0; maskIndex < channelMasks.size(); ) { |
| audio_channel_mask_t channelMask = channelMasks[maskIndex]; |
| if (channelMask & ~AUDIO_CHANNEL_OUT_STEREO) { |
| ALOGI("%s: force NEVER, so remove channelMask 0x%08x", __FUNCTION__, channelMask); |
| channelMasks.removeAt(maskIndex); |
| } else { |
| maskIndex++; |
| } |
| } |
| // If ALWAYS, then make sure we at least support 5.1 |
| } else if (forceUse == AUDIO_POLICY_FORCE_ENCODED_SURROUND_ALWAYS) { |
| bool supports5dot1 = false; |
| // Are there any channel masks that can be considered "surround"? |
| for (size_t maskIndex = 0; maskIndex < channelMasks.size(); maskIndex++) { |
| audio_channel_mask_t channelMask = channelMasks[maskIndex]; |
| if ((channelMask & AUDIO_CHANNEL_OUT_5POINT1) == AUDIO_CHANNEL_OUT_5POINT1) { |
| supports5dot1 = true; |
| break; |
| } |
| } |
| // If not then add 5.1 support. |
| if (!supports5dot1) { |
| channelMasks.add(AUDIO_CHANNEL_OUT_5POINT1); |
| ALOGI("%s: force ALWAYS, so adding channelMask for 5.1 surround", __FUNCTION__); |
| } |
| } |
| } |
| |
| void AudioPolicyManager::updateAudioProfiles(audio_devices_t device, |
| audio_io_handle_t ioHandle, |
| AudioProfileVector &profiles) |
| { |
| String8 reply; |
| |
| // Format MUST be checked first to update the list of AudioProfile |
| if (profiles.hasDynamicFormat()) { |
| reply = mpClientInterface->getParameters( |
| ioHandle, String8(AudioParameter::keyStreamSupportedFormats)); |
| ALOGV("%s: supported formats %s", __FUNCTION__, reply.string()); |
| AudioParameter repliedParameters(reply); |
| if (repliedParameters.get( |
| String8(AudioParameter::keyStreamSupportedFormats), reply) != NO_ERROR) { |
| ALOGE("%s: failed to retrieve format, bailing out", __FUNCTION__); |
| return; |
| } |
| FormatVector formats = formatsFromString(reply.string()); |
| if (device == AUDIO_DEVICE_OUT_HDMI) { |
| filterSurroundFormats(&formats); |
| } |
| profiles.setFormats(formats); |
| } |
| const FormatVector &supportedFormats = profiles.getSupportedFormats(); |
| |
| for (size_t formatIndex = 0; formatIndex < supportedFormats.size(); formatIndex++) { |
| audio_format_t format = supportedFormats[formatIndex]; |
| ChannelsVector channelMasks; |
| SampleRateVector samplingRates; |
| AudioParameter requestedParameters; |
| requestedParameters.addInt(String8(AudioParameter::keyFormat), format); |
| |
| if (profiles.hasDynamicRateFor(format)) { |
| reply = mpClientInterface->getParameters( |
| ioHandle, |
| requestedParameters.toString() + ";" + |
| AudioParameter::keyStreamSupportedSamplingRates); |
| ALOGV("%s: supported sampling rates %s", __FUNCTION__, reply.string()); |
| AudioParameter repliedParameters(reply); |
| if (repliedParameters.get( |
| String8(AudioParameter::keyStreamSupportedSamplingRates), reply) == NO_ERROR) { |
| samplingRates = samplingRatesFromString(reply.string()); |
| } |
| } |
| if (profiles.hasDynamicChannelsFor(format)) { |
| reply = mpClientInterface->getParameters(ioHandle, |
| requestedParameters.toString() + ";" + |
| AudioParameter::keyStreamSupportedChannels); |
| ALOGV("%s: supported channel masks %s", __FUNCTION__, reply.string()); |
| AudioParameter repliedParameters(reply); |
| if (repliedParameters.get( |
| String8(AudioParameter::keyStreamSupportedChannels), reply) == NO_ERROR) { |
| channelMasks = channelMasksFromString(reply.string()); |
| if (device == AUDIO_DEVICE_OUT_HDMI) { |
| filterSurroundChannelMasks(&channelMasks); |
| } |
| } |
| } |
| profiles.addProfileFromHal(new AudioProfile(format, channelMasks, samplingRates)); |
| } |
| } |
| |
| }; // namespace android |