blob: 9851f3a00dae8d7103d007ae75930ba9e5ba5136 [file] [log] [blame]
/*
*
* Copyright 2015, The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "AudioFlinger"
//#define LOG_NDEBUG 0
#include "AudioStreamOut.h"
#include <media/audiohal/DeviceHalInterface.h>
#include <media/audiohal/StreamHalInterface.h>
#include <system/audio.h>
#include <utils/Log.h>
#include "AudioHwDevice.h"
namespace android {
// ----------------------------------------------------------------------------
AudioStreamOut::AudioStreamOut(AudioHwDevice *dev, audio_output_flags_t flags)
: audioHwDev(dev)
, flags(flags)
{
}
// This must be defined here together with the HAL includes above and
// not solely in the header.
AudioStreamOut::~AudioStreamOut() = default;
sp<DeviceHalInterface> AudioStreamOut::hwDev() const
{
return audioHwDev->hwDevice();
}
status_t AudioStreamOut::getRenderPosition(uint64_t *frames)
{
if (stream == nullptr) {
return NO_INIT;
}
uint32_t halPosition = 0;
const status_t status = stream->getRenderPosition(&halPosition);
if (status != NO_ERROR) {
return status;
}
// Maintain a 64-bit render position using the 32-bit result from the HAL.
// This delta calculation relies on the arithmetic overflow behavior
// of integers. For example (100 - 0xFFFFFFF0) = 116.
const auto truncatedPosition = (uint32_t)mRenderPosition;
int32_t deltaHalPosition; // initialization not needed, overwitten by __builtin_sub_overflow()
(void) __builtin_sub_overflow(halPosition, truncatedPosition, &deltaHalPosition);
if (deltaHalPosition > 0) {
mRenderPosition += deltaHalPosition;
} else if (mExpectRetrograde) {
mExpectRetrograde = false;
mRenderPosition -= static_cast<uint64_t>(-deltaHalPosition);
}
// Scale from HAL sample rate to application rate.
*frames = mRenderPosition / mRateMultiplier;
return status;
}
// return bottom 32-bits of the render position
status_t AudioStreamOut::getRenderPosition(uint32_t *frames)
{
uint64_t position64 = 0;
const status_t status = getRenderPosition(&position64);
if (status == NO_ERROR) {
*frames = (uint32_t)position64;
}
return status;
}
status_t AudioStreamOut::getPresentationPosition(uint64_t *frames, struct timespec *timestamp)
{
if (stream == nullptr) {
return NO_INIT;
}
uint64_t halPosition = 0;
const status_t status = stream->getPresentationPosition(&halPosition, timestamp);
if (status != NO_ERROR) {
return status;
}
if (mHalFormatHasProportionalFrames &&
(flags & AUDIO_OUTPUT_FLAG_DIRECT) == AUDIO_OUTPUT_FLAG_DIRECT) {
// For DirectTrack reset timestamp to 0 on standby.
const uint64_t adjustedPosition = (halPosition <= mFramesWrittenAtStandby) ?
0 : (halPosition - mFramesWrittenAtStandby);
// Scale from HAL sample rate to application rate.
*frames = adjustedPosition / mRateMultiplier;
} else {
// For offloaded MP3 and other compressed formats, and linear PCM.
*frames = halPosition;
}
return status;
}
status_t AudioStreamOut::open(
audio_io_handle_t handle,
audio_devices_t deviceType,
struct audio_config *config,
const char *address)
{
sp<StreamOutHalInterface> outStream;
const audio_output_flags_t customFlags = (config->format == AUDIO_FORMAT_IEC61937)
? (audio_output_flags_t)(flags | AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO)
: flags;
int status = hwDev()->openOutputStream(
handle,
deviceType,
customFlags,
config,
address,
&outStream);
ALOGV("AudioStreamOut::open(), HAL returned stream %p, sampleRate %d, format %#x,"
" channelMask %#x, status %d", outStream.get(), config->sample_rate, config->format,
config->channel_mask, status);
// Some HALs may not recognize AUDIO_FORMAT_IEC61937. But if we declare
// it as PCM then it will probably work.
if (status != NO_ERROR && config->format == AUDIO_FORMAT_IEC61937) {
struct audio_config customConfig = *config;
customConfig.format = AUDIO_FORMAT_PCM_16_BIT;
status = hwDev()->openOutputStream(
handle,
deviceType,
customFlags,
&customConfig,
address,
&outStream);
ALOGV("AudioStreamOut::open(), treat IEC61937 as PCM, status = %d", status);
}
if (status == NO_ERROR) {
stream = outStream;
mHalFormatHasProportionalFrames = audio_has_proportional_frames(config->format);
status = stream->getFrameSize(&mHalFrameSize);
LOG_ALWAYS_FATAL_IF(status != OK, "Error retrieving frame size from HAL: %d", status);
LOG_ALWAYS_FATAL_IF(mHalFrameSize == 0, "Error frame size was %zu but must be greater than"
" zero", mHalFrameSize);
}
return status;
}
audio_config_base_t AudioStreamOut::getAudioProperties() const
{
audio_config_base_t result = AUDIO_CONFIG_BASE_INITIALIZER;
if (stream->getAudioProperties(&result) != OK) {
result.sample_rate = 0;
result.channel_mask = AUDIO_CHANNEL_INVALID;
result.format = AUDIO_FORMAT_INVALID;
}
return result;
}
int AudioStreamOut::flush()
{
mRenderPosition = 0;
mExpectRetrograde = false;
mFramesWritten = 0;
mFramesWrittenAtStandby = 0;
const status_t result = stream->flush();
return result != INVALID_OPERATION ? result : NO_ERROR;
}
int AudioStreamOut::standby()
{
mRenderPosition = 0;
mExpectRetrograde = false;
mFramesWrittenAtStandby = mFramesWritten;
return stream->standby();
}
ssize_t AudioStreamOut::write(const void *buffer, size_t numBytes)
{
size_t bytesWritten;
const status_t result = stream->write(buffer, numBytes, &bytesWritten);
if (result == OK && bytesWritten > 0 && mHalFrameSize > 0) {
mFramesWritten += bytesWritten / mHalFrameSize;
}
return result == OK ? bytesWritten : result;
}
} // namespace android